summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07serial: mvebu-uart: initial support for Armada-3700 serial portWilson Ding1-0/+22
Armada-3700's uart is a simple serial port, which doesn't support. Configuring the modem control lines. The uart port has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO The uart driver implements the uart core operations. It also support the system (early) console based on Armada-3700's serial port. Known Issue: The uart driver currently doesn't support clock programming, which means the baud-rate stays with the default value configured by the bootloader at boot time [gregory.clement@free-electrons.com: Rewrite many part which are too long to enumerate] Signed-off-by: Wilson Ding <dingwei@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07tty: sh-sci: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06serial-uartlite: add earlycon supportRich Felker1-0/+1
Microblaze currently uses the old earlyprintk system, rather than the unified earlycon support, to show boot messages on uartlite. Add earlycon support so that other archs using uartlite can benefit from it. The new code in uartlite.c is copied almost verbatim from arch/microblaze/kernel/early_printk.c. Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06serial: sh-sci: Add CONFIG_SERIAL_EARLYCON supportYoshinori Sato1-0/+6
"earlyprintk" is architecture specific option. General "earlycon" option support is much better. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> [uli: preserve other SCSCR bits when asserting RE and TE] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> [geert: rewording, #ifdef rework] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06serial: Remove 68328 driverFrederik Völkel1-11/+0
It's old, messy and mostly unmaintained. Remove it as suggested by Peter Hurley and Alan. Signed-off-by: Frederik Völkel <frederik.voelkel@fau.de> Signed-off-by: Lukas Braun <lukas.braun@fau.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2015-12-22Merge tag 'qcom-soc-for-4.5' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based SoC Updates for 4.5 * Add WCNSS_CTRL client * Various Kconfig changes to fix build issues * Update SoC Qualcomm MAINTAINERS entry * Add SMP2P, SMSM, and SMEM state machine drivers * Add SMD-RPM support for existing platforms * tag 'qcom-soc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM soc: qcom: Introduce common SMEM state machine code Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-13serial: imx: implement handshaking using gpios with the mctrl_gpio helperUwe Kleine-König1-0/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: 8250: move of_serial code to 8250 directoryArnd Bergmann1-10/+0
As the of-serial driver is now 8250 specific, we can move the file to a more appropriate place in teh 8250 subdirectory and adapt the Kconfig help text and file name. I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged to avoid breaking user configuration files unnecessarily. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: remove NWP serial supportArnd Bergmann1-18/+1
The NWP serial driver is no longer needed, as the two users of this hardware have migrated to a much faster generation hardware, see https://en.wikipedia.org/wiki/QPACE2 for the replacement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Krill <ben@codiert.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: SERIAL_MXS_AUART should depend on HAS_DMAGeert Uytterhoeven1-1/+2
If NO_DMA=y: ERROR: "dma_unmap_sg" [drivers/tty/serial/mxs-auart.ko] undefined! ERROR: "dma_map_sg" [drivers/tty/serial/mxs-auart.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: SERIAL_IMX_AUART should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "dma_unmap_sg" [drivers/tty/serial/imx.ko] undefined! ERROR: "dma_map_sg" [drivers/tty/serial/imx.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial: SERIAL_ATMEL should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `atmel_release_rx_dma': atmel_serial.c:(.text+0x2502e): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `atmel_release_tx_dma': atmel_serial.c:(.text+0x25080): undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `atmel_tx_dma': atmel_serial.c:(.text+0x2517a): undefined reference to `dma_sync_sg_for_cpu' drivers/built-in.o: In function `atmel_release_tx_pdc': atmel_serial.c:(.text+0x252e6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_prepare_tx_pdc': atmel_serial.c:(.text+0x2531a): undefined reference to `dma_map_single' drivers/built-in.o: In function `atmel_release_rx_pdc': atmel_serial.c:(.text+0x25362): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `atmel_tx_pdc': atmel_serial.c:(.text+0x25722): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `atmel_rx_from_pdc': atmel_serial.c:(.text+0x2601a): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `atmel_rx_from_dma': atmel_serial.c:(.text+0x261b2): undefined reference to `dma_sync_sg_for_cpu' atmel_serial.c:(.text+0x26264): undefined reference to `dma_sync_sg_for_cpu' drivers/built-in.o: In function `atmel_prepare_rx_pdc': atmel_serial.c:(.text+0x262de): undefined reference to `dma_unmap_single' atmel_serial.c:(.text+0x26308): undefined reference to `dma_map_single' Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-08serial: msm_serial: Make config tristateStephen Boyd1-1/+1
This driver works as a module, so mark it as a tristate config instead of a bool. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-11-20serial: fsl_lpuart: Fix earlycon supportPeter Hurley1-1/+1
Earlycon support for Freescale lpuart should only be enabled when console support is enabled. Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support") Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17serial: fsl_lpuart: add earlycon supportStefan Agner1-0/+1
Add support for DT and command line based earlycon support for lpuart and lpuart32 used on Freescale Vybrid and and QorIQ LS1021A processors. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: mxs-auart+imx: allow compile testing on non-Freescale architecturesUwe Kleine-König1-2/+2
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: atmel: allow compile testing on non-atmel architecturesUwe Kleine-König1-2/+2
This commit also fixes compiler warnings and errors seen when building on x86_64. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: imx: add earlycon supportLucas Stach1-0/+1
Earlycon allows to have an early debugging console that doesn't need to be statically configured in the kernel config, like earlyprintk, but is set up through the stdout-path DT property. This allows to have the early debugging always built into the kernel and enabled on demand without clashing between different boards or architectures. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Switch to generic DMA residue handlingGeert Uytterhoeven1-1/+1
Convert the SCI driver from the SHDMAE-specific partial DMA transfer handling to the generic dmaengine residual data framework. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-04Revert "uart: pl011: Add support to ZTE ZX296702 uart"Greg Kroah-Hartman1-2/+2
This reverts commit 8cd90e50d1408c65c355084b1c7f8f9085f49c6b as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Add support to ZTE ZX296702 uartJun Nie1-2/+2
Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+2
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signalsNiklas Cassel1-0/+1
In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27Merge 4.2-rc4 into tty-nextGreg Kroah-Hartman1-1/+1
Other serial driver work wants to build on patches now in 4.2-rc4 so merge the branch so this can properly happen. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/uartlite: Let it build on any arch with IOMEMRicardo Ribalda Delgado1-1/+1
Being a soft core, it can be located not only on PPC or Microblaze platforms. Since the driver already does endianness detection we only need to change the Kconfig to use it in other arches. This is also done in other softcores as xilinx-spi. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23sc16is7xx: fix Kconfig dependenciesJakub Kicinski1-1/+1
When I2C=m and SPI=y or-ing them will produce =y while what we need is the lower bound, i.e. =m. Fortunately SPI is a boolean so we need to handle only one special case. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-26Merge tag 'tty-4.2-rc1' of ↵Linus Torvalds1-18/+54
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ...
2015-06-23sh-sci: Add h8300 SCIYoshinori Sato1-1/+1
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-06-10serial: stm32-usart: Add STM32 USART DriverMaxime Coquelin1-0/+17
This drivers adds support to the STM32 USART controller, which is a standard serial driver. Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: spi interface is addedRama Kiran Kumar Indrakanti1-8/+35
spi interface for sc16is7xx is added along with Kconfig flag to enable spi or i2c, thus in a instance we can have either spi or i2c or both, in sync to the hw. Signed-off-by: Rama Kiran Kumar Indrakanti <indrakanti_ram@hotmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial: samsung: only use earlycon for consoleArnd Bergmann1-1/+1
A configuration that enables earlycon but not the core console code causes a link error: drivers/built-in.o: In function `setup_earlycon': drivers/tty/serial/earlycon.c:70: undefined reference to `uart_parse_earlycon' That error can be triggered by the newly added samsung earlycon support, which is missing a 'select' statement. As suggested by Peter Hurley, solves the problem by moving the 'select SERIAL_EARLYCON' statement to the samsung console driver option, as it is done by all other console drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b94ba0328d3b3 ("serial: samsung: Add support for early console") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10TTY: msm_smd_tty: Remove unused driverStephen Boyd1-8/+0
This code is no longer used now that mach-msm has been removed. Delete it. Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06serial: SERIAL_IFX6X60 should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `ifx_spi_free_device': ifx6x60.c:(.text+0x96d9a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ifx_spi_spi_probe': ifx6x60.c:(.text+0x978a2): undefined reference to `dma_alloc_coherent' While DMA is optional in this driver, and is used only if ifx_modem_platform_data.use_dma is set, there are currently no in-tree users of ifx_modem_platform_data (and thus of this driver), so just make it depend on HAS_DMA. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1Christophe Leroy1-1/+1
Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as communication co-processor arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" It looks like not many places still have that old CONFIG_8xx used, so it is likely to be a good time to get rid of it completely ? Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: serial: Remove orphaned serial driverStephen Boyd1-12/+0
This driver is orphaned now that mach-msm has been removed. Delete it. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: serial: msm_serial: Remove dead codeStephen Boyd1-1/+1
This config no longer exists now that mach-msm has been removed. Delete it and the associated code. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07x86, intel-mid: remove Intel MID specific serial supportAndy Shevchenko1-10/+0
Since we have a native 8250 driver carrying the Intel MID serial devices the specific support is not needed anymore. This patch removes it for Intel MID. Note that the console device name is changed from ttyMFDx to ttySx. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07tty: serial: s/Medfile/MedfieldJoseph Kogut1-1/+1
Fixed misspelling of 'Medfield' Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07tty: kconfig: remove the superfluous dependency on PPC_OFKevin Hao1-2/+2
In the current kernel, the CONFIG_PPC_OF is always 'y' for the ppc arch. So we don't need to check it with other ppc specific options. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07serial: pl010 is no longer brokenArnd Bergmann1-1/+1
As more ARM platforms are moving into ARCH_MULTIPLATFORM, we can now have integrator and versatile in the same kernel, and first one selects this driver, causing a Kconfig warning: warning: (ARCH_INTEGRATOR_AP) selects SERIAL_AMBA_PL010 which has unmet direct dependencies (TTY && HAS_IOMEM && ARM_AMBA && (BROKEN || !ARCH_VERSATILE)) It turns out that it has not been broken on versatile for a long time, so we can remove the statement here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-07serial: driver for ETRAX FS UARTNiklas Cassel1-0/+10
This is the last missing piece to get a kernel booting to a prompt in qemu-cris. Signed-off-by: Niklas Cassel <nks@flawful.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02tty/serial: Add Spreadtrum sc9836-uart driver supportChunyan Zhang1-0/+18
Add a full sc9836-uart driver for SC9836 SoC which is based on the spreadtrum sharkl64 platform. This driver also support earlycon. Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02serial: samsung: Add support for early consoleTomasz Figa1-0/+1
This patch adds support for early console initialized from device tree and kernel command line to all variants of Samsung serial driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> [mszyprow: added support for command line based initialization, fixed comments, added documentation] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02x86, mrst: remove Moorestown specific serial driversAndy Shevchenko1-10/+0
Intel Moorestown platform support was removed few years ago. This is a follow up which removes Moorestown specific code for the serial devices. It includes mrst_max3110 and earlyprintk bits. This was used on SFI (Medfield, Clovertrail) based platforms as well, though new ones use normal serial interface for the console service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09serial: driver for Conexant Digicolor USARTBaruch Siach1-0/+15
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-07kconfig: use bool instead of boolean for type definition attributesChristoph Jaeger1-1/+1
Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-12-14Merge tag 'tty-3.19-rc1' of ↵Linus Torvalds1-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver update for 3.19-rc1. There are a number of TTY core changes/fixes in here from Peter Hurley that have all been teted in linux-next for a long time now. There are also the normal serial driver updates as well, full details in the changelog below" * tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits) serial: pxa: hold port.lock when reporting modem line changes tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put" tty: Deletion of unnecessary checks before two function calls n_tty: Fix read_buf race condition, increment read_head after pushing data serial: of-serial: add PM suspend/resume support Revert "serial: of-serial: add PM suspend/resume support" Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type" serial: 8250: don't attempt a trylock if in sysrq serial: core: Add big-endian iotype serial: samsung: use port->fifosize instead of hardcoded values serial: samsung: prefer to use fifosize from driver data serial: samsung: fix style problems serial: samsung: wait for transfer completion before clock disable serial: icom: fix error return code serial: tegra: clean up tty-flag assignments serial: Fix io address assign flow with Fintek PCI-to-UART Product serial: mxs-auart: fix tx_empty against shift register serial: mxs-auart: fix gpio change detection on interrupt serial: mxs-auart: Fix mxs_auart_set_ldisc() serial: 8250_dw: Use 64-bit access for OCTEON. ...
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 17:43:03 +0000