summaryrefslogtreecommitdiffstats
path: root/drivers/tee
AgeCommit message (Collapse)AuthorFilesLines
2021-11-04Merge tag 'char-misc-5.16-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc and other tiny driver subsystem updates for 5.16-rc1. Loads of things in here, all of which have been in linux-next for a while with no reported problems (except for one called out below.) Included are: - habanana labs driver updates, including dma_buf usage, reviewed and acked by the dma_buf maintainers - iio driver update (going through this tree not staging as they really do not belong going through that tree anymore) - counter driver updates - hwmon driver updates that the counter drivers needed, acked by the hwmon maintainer - xillybus driver updates - binder driver updates - extcon driver updates - dma_buf module namespaces added (will cause a build error in arm64 for allmodconfig, but that change is on its way through the drm tree) - lkdtm driver updates - pvpanic driver updates - phy driver updates - virt acrn and nitr_enclaves driver updates - smaller char and misc driver updates" * tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits) comedi: dt9812: fix DMA buffers on stack comedi: ni_usb6501: fix NULL-deref in command paths arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts ...
2021-11-02Merge tag 'optee-ffa-fix-for-v5.16' of ↵Arnd Bergmann1-2/+2
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Fix spell errors in OP-TEE FF-A driver log messages * tag 'optee-ffa-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: Fix spelling mistake "reclain" -> "reclaim" Link: https://lore.kernel.org/r/20211028185142.GA2489375@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-28optee: Fix spelling mistake "reclain" -> "reclaim"Colin Ian King1-2/+2
There are spelling mistakes in pr_err error messages. Fix them. Fixes: 4615e5a34b95 ("optee: add FF-A support") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> [jw: added a fixes] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-25dma-buf: move dma-buf symbols into the DMA_BUF module namespaceGreg Kroah-Hartman1-0/+3
In order to better track where in the kernel the dma-buf code is used, put the symbols in the namespace DMA_BUF and modify all users of the symbols to properly import the namespace to not break the build at the same time. Now the output of modinfo shows the use of these symbols, making it easier to watch for users over time: $ modinfo drivers/misc/fastrpc.ko | grep import import_ns: DMA_BUF Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: dri-devel@lists.freedesktop.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21optee: smc_abi.c: add missing #include <linux/mm.h>Jens Wiklander1-0/+1
Adds missing #include <linux/mm.h> drivers/tee/optee/smc_abi.c to fix compile errors like: drivers/tee/optee/smc_abi.c:405:15: error: implicit declaration of function 'page_to_section' [-Werror,-Wimplicit-function-declaration] optee_page = page_to_phys(*pages) + ^ arch/arm/include/asm/memory.h:148:43: note: expanded from macro 'page_to_phys' ^ include/asm-generic/memory_model.h:52:21: note: expanded from macro 'page_to_pfn' ^ include/asm-generic/memory_model.h:35:14: note: expanded from macro '__page_to_pfn' int __sec = page_to_section(__pg); \ ^ drivers/tee/optee/smc_abi.c:405:15: note: did you mean '__nr_to_section'? arch/arm/include/asm/memory.h:148:43: note: expanded from macro 'page_to_phys' ^ include/asm-generic/memory_model.h:52:21: note: expanded from macro 'page_to_pfn' ^ include/asm-generic/memory_model.h:35:14: note: expanded from macro '__page_to_pfn' int __sec = page_to_section(__pg); \ ^ include/linux/mmzone.h:1365:35: note: '__nr_to_section' declared here static inline struct mem_section *__nr_to_section(unsigned long nr) Fixes: c51a564a5b48 ("optee: isolate smc abi") Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Link: https://lore.kernel.org/r/20211021125539.3858495-1-jens.wiklander@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-18optee: add FF-A supportJens Wiklander7-13/+1143
Adds support for using FF-A [1] as transport to the OP-TEE driver. Introduces struct optee_msg_param_fmem which carries all information needed when OP-TEE is calling FFA_MEM_RETRIEVE_REQ to get the shared memory reference mapped by the hypervisor in S-EL2. Register usage is also updated to include the information needed. The FF-A part of this driver is enabled if CONFIG_ARM_FFA_TRANSPORT is enabled. [1] https://developer.arm.com/documentation/den0077/latest Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-18optee: isolate smc abiJens Wiklander8-1388/+1506
Isolate the ABI based on raw SMCs. Code specific to the raw SMC ABI is moved into smc_abi.c. This makes room for other ABIs with a clear separation. The driver changes to use module_init()/module_exit() instead of module_platform_driver(). The platform_driver_register() and platform_driver_unregister() functions called directly to keep the same behavior. This is needed because module_platform_driver() is based on module_driver() which can only be used once in a module. A function optee_rpc_cmd() is factored out from the function handle_rpc_func_cmd() to handle the ABI independent part of RPC processing. This patch is not supposed to change the driver behavior, it's only a matter of reorganizing the code. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-15optee: refactor driver with internal callbacksJens Wiklander4-106/+182
The OP-TEE driver is refactored with three internal callbacks replacing direct calls to optee_from_msg_param(), optee_to_msg_param() and optee_do_call_with_arg(). These functions a central to communicating with OP-TEE in secure world by using the SMC Calling Convention directly. This refactoring makes room for using other primitives to communicate with OP-TEE in secure world while being able to reuse as much as possible from the present driver. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-15optee: simplify optee_release()Jens Wiklander3-49/+39
Simplifies optee_release() with a new helper function, optee_close_session_helper() which has been factored out from optee_close_session(). A separate optee_release_supp() is added for the supplicant device. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-12tee: optee: Fix missing devices unregister during optee_removeSumit Garg3-0/+26
When OP-TEE driver is built as a module, OP-TEE client devices registered on TEE bus during probe should be unregistered during optee_remove. So implement optee_unregister_devices() accordingly. Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reported-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-09-14tee/optee/shm_pool: fix application of sizeof to pointerjing yangyang1-1/+1
sizeof when applied to a pointer typed expression gives the size of the pointer. ./drivers/tee/optee/shm_pool.c:38:28-34: ERROR application of sizeof to pointer This issue was detected with the help of Coccinelle. Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flagSumit Garg5-8/+14
Currently TEE_SHM_DMA_BUF flag has been inappropriately used to not register shared memory allocated for private usage by underlying TEE driver: OP-TEE in this case. So rather add a new flag as TEE_SHM_PRIV that can be utilized by underlying TEE drivers for private allocation and usage of shared memory. With this corrected, allow tee_shm_alloc_kernel_buf() to allocate a shared memory region without the backing of dma-buf. Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Co-developed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21tee: add tee_shm_alloc_kernel_buf()Jens Wiklander1-0/+18
Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory from a kernel driver. This function can later be made more lightweight by unnecessary dma-buf export. Cc: stable@vger.kernel.org Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: Clear stale cache entries during initializationTyler Hicks3-3/+43
The shm cache could contain invalid addresses if optee_disable_shm_cache() was not called from the .shutdown hook of the previous kernel before a kexec. These addresses could be unmapped or they could point to mapped but unintended locations in memory. Clear the shared memory cache, while being careful to not translate the addresses returned from OPTEE_SMC_DISABLE_SHM_CACHE, during driver initialization. Once all pre-cache shm objects are removed, proceed with enabling the cache so that we know that we can handle cached shm objects with confidence later in the .shutdown hook. Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: fix tee out of memory failure seen during kexec rebootAllen Pais1-0/+20
The following out of memory errors are seen on kexec reboot from the optee core. [ 0.368428] tee_bnxt_fw optee-clnt0: tee_shm_alloc failed [ 0.368461] tee_bnxt_fw: probe of optee-clnt0 failed with error -22 tee_shm_release() is not invoked on dma shm buffer. Implement .shutdown() method to handle the release of the buffers correctly. More info: https://github.com/OP-TEE/optee_os/issues/3637 Cc: stable@vger.kernel.org Signed-off-by: Allen Pais <apais@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: Refuse to load the driver under the kdump kernelTyler Hicks1-0/+11
Fix a hung task issue, seen when booting the kdump kernel, that is caused by all of the secure world threads being in a permanent suspended state: INFO: task swapper/0:1 blocked for more than 120 seconds. Not tainted 5.4.83 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. swapper/0 D 0 1 0 0x00000028 Call trace: __switch_to+0xc8/0x118 __schedule+0x2e0/0x700 schedule+0x38/0xb8 schedule_timeout+0x258/0x388 wait_for_completion+0x16c/0x4b8 optee_cq_wait_for_completion+0x28/0xa8 optee_disable_shm_cache+0xb8/0xf8 optee_probe+0x560/0x61c platform_drv_probe+0x58/0xa8 really_probe+0xe0/0x338 driver_probe_device+0x5c/0xf0 device_driver_attach+0x74/0x80 __driver_attach+0x64/0xe0 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x188/0x1e8 driver_register+0x64/0x110 __platform_driver_register+0x54/0x60 optee_driver_init+0x20/0x28 do_one_initcall+0x54/0x24c kernel_init_freeable+0x1e8/0x2c0 kernel_init+0x18/0x118 ret_from_fork+0x10/0x18 The invoke_fn hook returned OPTEE_SMC_RETURN_ETHREAD_LIMIT, indicating that the secure world threads were all in a suspended state at the time of the kernel crash. This intermittently prevented the kdump kernel from booting, resulting in a failure to collect the kernel dump. Make kernel dump collection more reliable on systems utilizing OP-TEE by refusing to load the driver under the kdump kernel. Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: Fix memory leak when failing to register shm pagesTyler Hicks1-2/+10
Free the previously allocated pages when we encounter an error condition while attempting to register the pages with the secure world. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Fixes: 5a769f6ff439 ("optee: Fix multi page dynamic shm pool alloc") Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-06-28Merge tag 'fallthrough-fixes-clang-5.14-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "Fix many fall-through warnings when building with Clang 12.0.0 and '-Wimplicit-fallthrough' so that we at some point will be able to enable that warning by default" * tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits) rxrpc: Fix fall-through warnings for Clang drm/nouveau/clk: Fix fall-through warnings for Clang drm/nouveau/therm: Fix fall-through warnings for Clang drm/nouveau: Fix fall-through warnings for Clang xfs: Fix fall-through warnings for Clang xfrm: Fix fall-through warnings for Clang tipc: Fix fall-through warnings for Clang sctp: Fix fall-through warnings for Clang rds: Fix fall-through warnings for Clang net/packet: Fix fall-through warnings for Clang net: netrom: Fix fall-through warnings for Clang ide: Fix fall-through warnings for Clang hwmon: (max6621) Fix fall-through warnings for Clang hwmon: (corsair-cpro) Fix fall-through warnings for Clang firewire: core: Fix fall-through warnings for Clang braille_console: Fix fall-through warnings for Clang ipv4: Fix fall-through warnings for Clang qlcnic: Fix fall-through warnings for Clang bnxt_en: Fix fall-through warnings for Clang netxen_nic: Fix fall-through warnings for Clang ...
2021-06-05Merge tag 'optee-fix-for-v5.13' of ↵Olof Johansson2-4/+8
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE use export_uuid() to copy UUID * tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: use export_uuid() to copy client UUID Link: https://lore.kernel.org/r/20210518100712.GA449561@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2021-05-18optee: use export_uuid() to copy client UUIDJens Wiklander2-4/+8
Prior to this patch optee_open_session() was making assumptions about the internal format of uuid_t by casting a memory location in a parameter struct to uuid_t *. Fix this using export_uuid() to get a well defined binary representation and also add an octets field in struct optee_msg_param in order to avoid casting. Fixes: c5b4312bea5d ("tee: optee: Add support for session login client UUID generation") Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-05-17tee: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-05-17Merge tag 'amdtee-fixes-for-v5.13' of ↵Arnd Bergmann3-16/+106
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes AMD-TEE reference count loaded TAs * tag 'amdtee-fixes-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: unload TA only when its refcount becomes 0 Link: https://lore.kernel.org/r/20210505110850.GA3434209@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-05-05tee: amdtee: unload TA only when its refcount becomes 0Rijo Thomas3-16/+106
Same Trusted Application (TA) can be loaded in multiple TEE contexts. If it is a single instance TA, the TA should not get unloaded from AMD Secure Processor, while it is still in use in another TEE context. Therefore reference count TA and unload it when the count becomes zero. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds4-10/+74
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-01Merge tag 'optee-memref-size-for-v5.13' of ↵Arnd Bergmann1-10/+0
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers OP-TEE skip check of returned memref size * tag 'optee-memref-size-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: do not check memref size on return from Secure World Link: https://lore.kernel.org/r/20210330110037.GA1166563@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-30tee: optee: do not check memref size on return from Secure WorldJerome Forissier1-10/+0
When Secure World returns, it may have changed the size attribute of the memory references passed as [in/out] parameters. The GlobalPlatform TEE Internal Core API specification does not restrict the values that this size can take. In particular, Secure World may increase the value to be larger than the size of the input buffer to indicate that it needs more. Therefore, the size check in optee_from_msg_param() is incorrect and needs to be removed. This fixes a number of failed test cases in the GlobalPlatform TEE Initial Configuratiom Test Suite v2_0_0_0-2017_06_09 when OP-TEE is compiled without dynamic shared memory support (CFG_CORE_DYN_SHM=n). Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-03-30tee: optee: fix build error caused by recent optee tracepoints featureJisheng Zhang1-0/+3
If build kernel without "O=dir", below error will be seen: In file included from drivers/tee/optee/optee_trace.h:67, from drivers/tee/optee/call.c:18: ./include/trace/define_trace.h:95:42: fatal error: ./optee_trace.h: No such file or directory 95 | #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) | ^ compilation terminated. Fix it by adding below line to Makefile: CFLAGS_call.o := -I$(src) Tested with and without "O=dir", both can build successfully. Fixes: 0101947dbcc3 ("tee: optee: add invoke_fn tracepoints") Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-15tee: optee: add invoke_fn tracepointsJisheng Zhang2-0/+71
Add tracepoints to retrieve information about the invoke_fn. This would help to measure how many invoke_fn are triggered and how long it takes to complete one invoke_fn call. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-09Merge tag 'optee-simplify-i2c-access_for-v5.12' of ↵Arnd Bergmann1-15/+16
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Simplify i2c acess in OP-TEE driver * tag 'optee-simplify-i2c-access_for-v5.12' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: simplify i2c access Link: https://lore.kernel.org/soc/20210208125853.GA288348%40jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-08optee: simplify i2c accessArnd Bergmann1-15/+16
Storing a bogus i2c_client structure on the stack adds overhead and causes a compile-time warning: drivers/tee/optee/rpc.c:493:6: error: stack frame size of 1056 bytes in function 'optee_handle_rpc' [-Werror,-Wframe-larger-than=] void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param, Change the implementation of handle_rpc_func_cmd_i2c_transfer() to open-code the i2c_transfer() call, which makes it easier to read and avoids the warning. Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus") Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-03Merge tag 'optee-fix-cond-resched-call-for-v5.12' of ↵Arnd Bergmann1-1/+2
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Remove unnecessary need_resched() before cond_resched() * tag 'optee-fix-cond-resched-call-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: remove need_resched() before cond_resched() tee: optee: replace might_sleep with cond_resched Link: https://lore.kernel.org/r/20210203120953.GB3624453@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-03tee: optee: remove need_resched() before cond_resched()Jens Wiklander1-2/+1
Testing need_resched() before cond_resched() is not needed as an equivalent test is done internally in cond_resched(). So drop the need_resched() test. Fixes: dcb3b06d9c34 ("tee: optee: replace might_sleep with cond_resched") Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-02optee: sync OP-TEE headersJens Wiklander4-189/+179
Pulls in updates in the internal headers from OP-TEE OS [1]. A few defines has been shortened, hence the changes in rpc.c. Defines not used by the driver in tee_rpc_cmd.h has been filtered out. Note that this does not change the ABI. Link: [1] https://github.com/OP-TEE/optee_os Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-02tee: optee: fix 'physical' typosBjorn Helgaas1-1/+1
Fix misspellings of "physical". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-02drivers: optee: use flexible-array member instead of zero-length arrayTian Tao1-1/+1
Use flexible-array member introduced in C99 instead of zero-length array. Most of zero-length array was already taken care in previous patch [1]. Now modified few more cases which were not handled earlier. [1]. https://patchwork.kernel.org/patch/11394197/ Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-21tee: optee: replace might_sleep with cond_reschedRouven Czerwinski1-1/+3
might_sleep() is a debugging aid and triggers rescheduling only for certain kernel configurations. Replace with an explicit check and reschedule to work for all kernel configurations. Fixes the following trace: [ 572.945146] rcu: INFO: rcu_sched self-detected stall on CPU [ 572.949275] rcu: 0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974 [ 572.957964] (t=2100 jiffies g=10393 q=21) [ 572.962054] NMI backtrace for cpu 0 [ 572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1 [ 572.971188] Hardware name: STM32 (Device Tree Support) [ 572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14) [ 572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8) [ 572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4) [ 572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130) [ 573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110) [ 573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88) [ 573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c) [ 573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8) [ 573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358) [ 573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc) [ 573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30) [ 573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240) [ 573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44) [ 573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0) [ 573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90) [ 573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90) [ 573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40) [ 573.119732] fce0: ffff0004 00000000 [ 573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000 [ 573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff [ 573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20) [ 573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44) [ 573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154) [ 573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190) [ 573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0) [ 573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c) [ 573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54) [ 573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0) [ 573.205803] ffa0: be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8 [ 573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8 [ 573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8 seen on STM32 DK2 with CONFIG_PREEMPT_NONE. Fixes: 9f02b8f61f29 ("tee: optee: add might_sleep for RPC requests") Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> [jw: added fixes tag + small adjustments in the code] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-14Merge branch 'linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-11-27Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Backmerge tag 'v5.10-rc2' into arm/driversArnd Bergmann1-1/+2
The SCMI pull request for the arm/drivers branch requires v5.10-rc2 because of dependencies with other git trees, so merge that in here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-25optee: add writeback to valid memory typeRui Miguel Silva1-1/+2
Only in smp systems the cache policy is setup as write alloc, in single cpu systems the cache policy is set as writeback and it is normal memory, so, it should pass the is_normal_memory check in the share memory registration. Add the right condition to make it work in no smp systems. Fixes: cdbcf83d29c1 ("tee: optee: check type of registered shared memory") Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers1-1/+1
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13Merge tag 'amdtee-fixes-for-5.10' of ↵Arnd Bergmann2-11/+23
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes AMD-TEE driver bug fixes AMD-TEE driver keeps track of shared memory buffers and their corresponding buffer id's in a global linked list. These buffers are used to share data between x86 and AMD Secure Processor. This pull request fixes issues related to maintaining mapped buffers in a shared linked list. * tag 'amdtee-fixes-for-5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: amdtee: synchronize access to shm list tee: amdtee: fix memory leak due to reset of global shm list Link: https://lore.kernel.org/r/20201109080809.GA3862873@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-09tee: amdtee: synchronize access to shm listRijo Thomas2-0/+9
Synchronize access to shm or shared memory buffer list to prevent race conditions due to concurrent updates to shared shm list by multiple threads. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-11-09tee: amdtee: fix memory leak due to reset of global shm listRijo Thomas2-11/+14
The driver maintains a list of shared memory buffers along with their mapped buffer id's in a global linked list. These buffers need to be unmapped after use by the user-space client. The global shared memory list is initialized to zero entries in the function amdtee_open(). This clearing of list entries can be a source for memory leak on secure side if the global linked list previously held some mapped buffer entries allocated from another TEE context. Fix potential memory leak issue by moving global shared memory list to AMD-TEE driver context data structure. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-10-26Merge tag 'optee-use-uuid-api-for-v5.10' of ↵Arnd Bergmann1-1/+1
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Use UUID API to export the UUID Uses export_uuid() to export and uuid_t to an u8 array instead of depending on the internals of uuid_t. * tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Use UUID API for exporting the UUID Link: https://lore.kernel.org/r/20201013063612.GA3325842@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26Merge tag 'tee-fix-for-v5.10' of ↵Arnd Bergmann1-1/+2
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Reenable kernel login method for kernel TEE client API The kernel TEE login method was accidentally disabled previously when enabling a few other login methods, so fix that here. * tag 'tee-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: client UUID: Skip REE kernel login method as well Link: https://lore.kernel.org/r/20201013070918.GA3328976@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-13tee: client UUID: Skip REE kernel login method as wellSumit Garg1-1/+2
Since the addition of session's client UUID generation via commit [1], login via REE kernel method was disallowed. So fix that via passing nill UUID in case of TEE_IOCTL_LOGIN_REE_KERNEL method as well. Fixes: e33bcbab16d1 ("tee: add support for session's client UUID generation") [1] Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-10-13tee: optee: Use UUID API for exporting the UUIDAndy Shevchenko1-1/+1
There is export_uuid() function which exports uuid_t to the u8 array. Use it instead of open coding variant. This allows to hide the uuid_t internals. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 10:50:40 +0000