summaryrefslogtreecommitdiffstats
path: root/drivers/tee/optee/core.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-11optee: Add __init/__exit annotations to module init/exit funcsXiu Jianfeng1-2/+2
Add missing __init/__exit annotations to module init/exit funcs. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-04-25optee: cache argument shared memory structsJens Wiklander1-0/+1
Implements a cache to handle shared memory used to pass the argument struct needed when doing a normal yielding call into secure world. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-02-16optee: add optee_pool_op_free_helper()Jens Wiklander1-0/+10
Adds a common helper function to free a tee_shm allocated using the helper function optee_pool_op_alloc_helper(). Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-02-16tee: simplify shm pool handlingJens Wiklander1-4/+7
Replaces the shared memory pool based on two pools with a single pool. The alloc() function pointer in struct tee_shm_pool_ops gets another parameter, align. This makes it possible to make less than page aligned allocations from the optional reserved shared memory pool while still making user space allocations page aligned. With in practice unchanged behaviour using only a single pool for bookkeeping. The allocation algorithm in the static OP-TEE shared memory pool is changed from best-fit to first-fit since only the latter supports an alignment parameter. The best-fit algorithm was previously the default choice and not a conscious one. The optee and amdtee drivers are updated as needed to work with this changed pool handling. This also removes OPTEE_SHM_NUM_PRIV_PAGES which becomes obsolete with this change as the private pages can be mixed with the payload pages. The OP-TEE driver changes minimum alignment for argument struct from 8 bytes to 512 bytes. A typical OP-TEE private shm allocation is 224 bytes (argument struct with 6 parameters, needed for open session). So with an alignment of 512 well waste a bit more than 50%. Before this we had a single page reserved for this so worst case usage compared to that would be 3 pages instead of 1 page. However, this worst case only occurs if there is a high pressure from multiple threads on secure world. All in all this should scale up and down better than fixed boundaries. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-02-03optee: use driver internal tee_context for some rpcJens Wiklander1-0/+1
Adds a driver private tee_context by moving the tee_context in struct optee_notif to struct optee. This tee_context was previously used when doing internal calls to secure world to deliver notification. The new driver internal tee_context is now also when allocating driver private shared memory. This decouples the shared memory object from its original tee_context. This is needed when the life time of such a memory allocation outlives the client tee_context. This patch fixes the problem described below: The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot") introduced a kernel shutdown regression that can be triggered after running the OP-TEE xtest suites. Once the shutdown hook is called it is not possible to communicate any more with the supplicant process because the system is not scheduling task any longer. Thus if the optee driver shutdown path receives a supplicant RPC request from the OP-TEE we will deadlock the kernel's shutdown. Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot") Fixes: 217e0250cccb ("tee: use reference counting for tee_context") Reported-by: Lars Persson <larper@axis.com> Cc: stable@vger.kernel.org Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-01-10Merge tag 'drivers-5.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are cleanups and minor bugfixes across several SoC specific drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone, Renesas, ZynqMP Noteworthy new features are: - The op-tee firmware driver gains support for asynchronous notifications from secure-world firmware. - Qualcomm platforms gain support for new SoC types in various drivers: power domain, cache controller, RPM sleep, soc-info - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as well as a new USIv2 driver that handles various types of serial communiction (uart, i2c, spi) - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers, as well as memory controller support for RZ/G2L (R9A07G044). - Apple M1 gains support for the PMGR power management driver" * tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ...
2021-12-16tee: optee: Fix incorrect page free bugSumit Garg1-4/+2
Pointer to the allocated pages (struct page *page) has already progressed towards the end of allocation. It is incorrect to perform __free_pages(page, order) using this pointer as we would free any arbitrary pages. Fix this by stop modifying the page pointer. Fixes: ec185dd3ab25 ("optee: Fix memory leak when failing to register shm pages") Cc: stable@vger.kernel.org Reported-by: Patrik Lantz <patrik.lantz@axis.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-11-17optee: separate notification functionsJens Wiklander1-1/+1
Renames struct optee_wait_queue to struct optee_notif and all related functions to optee_notif_*(). The implementation is changed to allow sending a notification from an atomic state, that is from the top half of an interrupt handler. Waiting for keys is currently only used when secure world is waiting for a mutex or condition variable. The old implementation could handle any 32-bit key while this new implementation is restricted to only 8 bits or the maximum value 255. A upper value is needed since a bitmap is allocated to allow an interrupt handler to only set a bit in case the waiter hasn't had the time yet to allocate and register a completion. The keys are currently only representing secure world threads which number usually are never even close to 255 so it should be safe for now. In future ABI updates the maximum value of the key will be communicated while the driver is initializing. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-18optee: add FF-A supportJens Wiklander1-2/+14
Adds support for using FF-A [1] as transport to the OP-TEE driver. Introduces struct optee_msg_param_fmem which carries all information needed when OP-TEE is calling FFA_MEM_RETRIEVE_REQ to get the shared memory reference mapped by the hypervisor in S-EL2. Register usage is also updated to include the information needed. The FF-A part of this driver is enabled if CONFIG_ARM_FFA_TRANSPORT is enabled. [1] https://developer.arm.com/documentation/den0077/latest Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-18optee: isolate smc abiJens Wiklander1-670/+51
Isolate the ABI based on raw SMCs. Code specific to the raw SMC ABI is moved into smc_abi.c. This makes room for other ABIs with a clear separation. The driver changes to use module_init()/module_exit() instead of module_platform_driver(). The platform_driver_register() and platform_driver_unregister() functions called directly to keep the same behavior. This is needed because module_platform_driver() is based on module_driver() which can only be used once in a module. A function optee_rpc_cmd() is factored out from the function handle_rpc_func_cmd() to handle the ABI independent part of RPC processing. This patch is not supposed to change the driver behavior, it's only a matter of reorganizing the code. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-15optee: refactor driver with internal callbacksJens Wiklander1-48/+100
The OP-TEE driver is refactored with three internal callbacks replacing direct calls to optee_from_msg_param(), optee_to_msg_param() and optee_do_call_with_arg(). These functions a central to communicating with OP-TEE in secure world by using the SMC Calling Convention directly. This refactoring makes room for using other primitives to communicate with OP-TEE in secure world while being able to reuse as much as possible from the present driver. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-15optee: simplify optee_release()Jens Wiklander1-37/+19
Simplifies optee_release() with a new helper function, optee_close_session_helper() which has been factored out from optee_close_session(). A separate optee_release_supp() is added for the supplicant device. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-12tee: optee: Fix missing devices unregister during optee_removeSumit Garg1-0/+3
When OP-TEE driver is built as a module, OP-TEE client devices registered on TEE bus during probe should be unregistered during optee_remove. So implement optee_unregister_devices() accordingly. Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reported-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flagSumit Garg1-1/+2
Currently TEE_SHM_DMA_BUF flag has been inappropriately used to not register shared memory allocated for private usage by underlying TEE driver: OP-TEE in this case. So rather add a new flag as TEE_SHM_PRIV that can be utilized by underlying TEE drivers for private allocation and usage of shared memory. With this corrected, allow tee_shm_alloc_kernel_buf() to allocate a shared memory region without the backing of dma-buf. Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Co-developed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: Clear stale cache entries during initializationTyler Hicks1-0/+9
The shm cache could contain invalid addresses if optee_disable_shm_cache() was not called from the .shutdown hook of the previous kernel before a kexec. These addresses could be unmapped or they could point to mapped but unintended locations in memory. Clear the shared memory cache, while being careful to not translate the addresses returned from OPTEE_SMC_DISABLE_SHM_CACHE, during driver initialization. Once all pre-cache shm objects are removed, proceed with enabling the cache so that we know that we can handle cached shm objects with confidence later in the .shutdown hook. Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: fix tee out of memory failure seen during kexec rebootAllen Pais1-0/+20
The following out of memory errors are seen on kexec reboot from the optee core. [ 0.368428] tee_bnxt_fw optee-clnt0: tee_shm_alloc failed [ 0.368461] tee_bnxt_fw: probe of optee-clnt0 failed with error -22 tee_shm_release() is not invoked on dma shm buffer. Implement .shutdown() method to handle the release of the buffers correctly. More info: https://github.com/OP-TEE/optee_os/issues/3637 Cc: stable@vger.kernel.org Signed-off-by: Allen Pais <apais@linux.microsoft.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-07-21optee: Refuse to load the driver under the kdump kernelTyler Hicks1-0/+11
Fix a hung task issue, seen when booting the kdump kernel, that is caused by all of the secure world threads being in a permanent suspended state: INFO: task swapper/0:1 blocked for more than 120 seconds. Not tainted 5.4.83 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. swapper/0 D 0 1 0 0x00000028 Call trace: __switch_to+0xc8/0x118 __schedule+0x2e0/0x700 schedule+0x38/0xb8 schedule_timeout+0x258/0x388 wait_for_completion+0x16c/0x4b8 optee_cq_wait_for_completion+0x28/0xa8 optee_disable_shm_cache+0xb8/0xf8 optee_probe+0x560/0x61c platform_drv_probe+0x58/0xa8 really_probe+0xe0/0x338 driver_probe_device+0x5c/0xf0 device_driver_attach+0x74/0x80 __driver_attach+0x64/0xe0 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x188/0x1e8 driver_register+0x64/0x110 __platform_driver_register+0x54/0x60 optee_driver_init+0x20/0x28 do_one_initcall+0x54/0x24c kernel_init_freeable+0x1e8/0x2c0 kernel_init+0x18/0x118 ret_from_fork+0x10/0x18 The invoke_fn hook returned OPTEE_SMC_RETURN_ETHREAD_LIMIT, indicating that the secure world threads were all in a suspended state at the time of the kernel crash. This intermittently prevented the kdump kernel from booting, resulting in a failure to collect the kernel dump. Make kernel dump collection more reliable on systems utilizing OP-TEE by refusing to load the driver under the kdump kernel. Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-03-30tee: optee: do not check memref size on return from Secure WorldJerome Forissier1-10/+0
When Secure World returns, it may have changed the size attribute of the memory references passed as [in/out] parameters. The GlobalPlatform TEE Internal Core API specification does not restrict the values that this size can take. In particular, Secure World may increase the value to be larger than the size of the input buffer to indicate that it needs more. Therefore, the size check in optee_from_msg_param() is incorrect and needs to be removed. This fixes a number of failed test cases in the GlobalPlatform TEE Initial Configuratiom Test Suite v2_0_0_0-2017_06_09 when OP-TEE is compiled without dynamic shared memory support (CFG_CORE_DYN_SHM=n). Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-21driver: tee: Handle NULL pointer indication from clientCedric Neveux1-0/+7
TEE Client introduce a new capability "TEE_GEN_CAP_MEMREF_NULL" to handle the support of the shared memory buffer with a NULL pointer. This capability depends on TEE Capabilities and driver support. Driver and TEE exchange capabilities at driver initialization. Signed-off-by: Michael Whitfield <michael.whitfield@nxp.com> Signed-off-by: Cedric Neveux <cedric.neveux@nxp.com> Reviewed-by: Joakim Bech <joakim.bech@linaro.org> Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-07-10optee: enable support for multi-stage bus enumerationMaxim Uvarov1-3/+24
Some drivers (like ftpm) can operate only after tee-supplicant runs because of tee-supplicant provides things like storage services (rpmb, shm).  This patch splits probe of non tee-supplicant dependable drivers to the early stage, and after tee-supplicant run probe other drivers. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Suggested-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-03optee: model OP-TEE as a platform device/driverArd Biesheuvel1-89/+64
To simplify adding ACPI support to the OP-TEE driver, model it as a platform driver. This will permit us to use the generic device property layer for parsing additional properties, regardless of whether DT or ACPI is being used. Note that this change will result in the OP-TEE driver to be loaded automatically on systems that advertise the presence of OP-TEE via the device tree. Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-11-15tee: optee: fix device enumeration error handlingJens Wiklander1-8/+12
Prior to this patch in optee_probe() when optee_enumerate_devices() was called the struct optee was fully initialized. If optee_enumerate_devices() returns an error optee_probe() is supposed to clean up and free the struct optee completely, but will at this late stage need to call optee_remove() instead. This isn't done and thus freeing the struct optee prematurely. With this patch the call to optee_enumerate_devices() is done after optee_probe() has returned successfully and in case optee_enumerate_devices() fails everything is cleaned up with a call to optee_remove(). Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28Merge tag 'tee-optee-for-5.2' of ↵Olof Johansson1-31/+49
http://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Allow OP-TEE driver to work without static shared memory * tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee: optee: allow to work without static shared memory Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-17optee: allow to work without static shared memoryVolodymyr Babchuk1-31/+49
On virtualized systems it is possible that OP-TEE will provide only dynamic shared memory support. So it is fine to boot without static SHM enabled if dymanic one is supported. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-02-28tee: optee: add missing of_node_put after of_device_is_availableJulia Lawall1-1/+3
Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-01tee: optee: add TEE bus device enumeration supportSumit Garg1-0/+4
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ services for TEE bus. So implement device enumeration using invoke function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of device UUIDs. Also register these enumerated devices with TEE bus as "optee-clntX" device. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> [jw: fix optee_enumerate_devices() with no devices found] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-11tee: optee: log message if dynamic shm is enabledVictor Chong1-0/+3
When dynamic shared memory support is enabled in the OP-TEE Trusted OS, it doesn't mean that the driver supports it, which can confuse users during debugging. Log a message when dynamic shared memory is enabled in the driver, to let users know for sure. Suggested-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Victor Chong <victor.chong@linaro.org> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-26Merge tag 'tee-drv-for-4.20' of ↵Olof Johansson1-1/+1
git://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Misc enhancement for tee driver subsystem * Adds a kernel internal tee client interface allowing other drivers etc to access a TEE * OP-TEE driver takes DT status property into account * tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: add kernel internal client interface tee: optee: take DT status property into account Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24tee: optee: take DT status property into accountArd Biesheuvel1-1/+1
DT nodes may have a 'status' property which, if set to anything other than 'ok' or 'okay', indicates to the OS that the DT node should be treated as if it was not present. So add that missing logic to the OP-TEE driver. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-06-20tee: optee: making OPTEE_SHM_NUM_PRIV_PAGES configurable via KconfigSahil Malhotra1-1/+1
This change adds KCONFIG option to set number of pages out of whole shared memory to be used for OP-TEE driver private data structures. Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com> [jw: fixing trivial merge conflict] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: optee: report OP-TEE revision informationJérôme Forissier1-0/+23
When the driver initializes, report the following information about the OP-TEE OS: - major and minor version, - build identifier (if available). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Matthias Brugger <mbruger@suse.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-21Merge tag 'tee-drv-dynamic-shm-for-v4.16' of ↵Arnd Bergmann1-33/+119
https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Pull "tee dynamic shm for v4.16" from Jens Wiklander: This pull request enables dynamic shared memory support in the TEE subsystem as a whole and in OP-TEE in particular. Global Platform TEE specification [1] allows client applications to register part of own memory as a shared buffer between application and TEE. This allows fast zero-copy communication between TEE and REE. But current implementation of TEE in Linux does not support this feature. Also, current implementation of OP-TEE transport uses fixed size pre-shared buffer for all communications with OP-TEE OS. This is okay in the most use cases. But this prevents use of OP-TEE in virtualized environments, because: a) We can't share the same buffer between different virtual machines b) Physically contiguous memory as seen by VM can be non-contiguous in reality (and as seen by OP-TEE OS) due to second stage of MMU translation. c) Size of this pre-shared buffer is limited. So, first part of this pull request adds generic register/unregister interface to tee subsystem. The second part adds necessary features into OP-TEE driver, so it can use not only static pre-shared buffer, but whole RAM to communicate with OP-TEE OS. This change is backwards compatible allowing older secure world or user space to work with newer kernels and vice versa. [1] https://www.globalplatform.org/specificationsdevice.asp * tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: shm: inline tee_shm_get_id() tee: use reference counting for tee_context tee: optee: enable dynamic SHM support tee: optee: add optee-specific shared pool implementation tee: optee: store OP-TEE capabilities in private data tee: optee: add registered buffers handling into RPC calls tee: optee: add registered shared parameters handling tee: optee: add shared buffer registration functions tee: optee: add page list manipulation functions tee: optee: Update protocol definitions tee: shm: add page accessor functions tee: shm: add accessors for buffer size and page offset tee: add register user memory tee: flexible shared memory pool creation
2017-12-21Merge tag 'tee-drv-async-supplicant-for-v4.16' of ↵Arnd Bergmann1-7/+4
https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Pull "Enable async communication with tee supplicant" from Jens Wiklander: This pull request enables asynchronous communication with TEE supplicant by introducing meta parameters in the user space API. The meta parameters can be used to tag requests with an id that can be matched against an asynchronous response as is done here in the OP-TEE driver. Asynchronous supplicant communication is needed by OP-TEE to implement GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification is available at https://www.globalplatform.org/specificationsdevice.asp. This change is backwards compatible allowing older supplicants to work with newer kernels and vice versa. * tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: support asynchronous supplicant requests tee: add TEE_IOCTL_PARAM_ATTR_META tee: add tee_param_is_memref() for driver use
2017-12-15tee: optee: enable dynamic SHM supportVolodymyr Babchuk1-18/+51
Previous patches added various features that are needed for dynamic SHM. Dynamic SHM allows Normal World to share any buffers with OP-TEE. While original design suggested to use pre-allocated region (usually of 1M to 2M of size), this new approach allows to use all non-secure RAM for command buffers, RPC allocations and TA parameters. This patch checks capability OPTEE_SMC_SEC_CAP_DYNAMIC_SHM. If it was set by OP-TEE, then kernel part of OP-TEE will use kernel page allocator to allocate command buffers. Also it will set TEE_GEN_CAP_REG_MEM capability to tell userspace that it supports shared memory registration. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: store OP-TEE capabilities in private dataVolodymyr Babchuk1-0/+1
Those capabilities will be used in subsequent patches. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add registered buffers handling into RPC callsVolodymyr Babchuk1-0/+2
With latest changes to OP-TEE we can use any buffers as a shared memory. Thus, it is possible for supplicant to provide part of own memory when OP-TEE asks to allocate a shared buffer. This patch adds support for such feature into RPC handling code. Now when OP-TEE asks supplicant to allocate shared buffer, supplicant can use TEE_IOC_SHM_REGISTER to provide such buffer. RPC handler is aware of this, so it will pass list of allocated pages to OP-TEE. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: fix parenthesis alignment in free_pages_list()] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add registered shared parameters handlingVolodymyr Babchuk1-15/+63
Now, when client applications can register own shared buffers in OP-TEE, we need to extend ABI for parameter passing to/from OP-TEE. So, if OP-TEE core detects that parameter belongs to registered shared memory, it will use corresponding parameter attribute. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add shared buffer registration functionsVolodymyr Babchuk1-0/+2
This change adds ops for shm_(un)register functions in tee interface. Client application can use these functions to (un)register an own shared buffer in OP-TEE address space. This allows zero copy data sharing between Normal and Secure Worlds. Please note that while those functions were added to optee code, it does not report to userspace that those functions are available. OP-TEE code does not set TEE_GEN_CAP_REG_MEM flag. This flag will be enabled only after all other features of dynamic shared memory will be implemented in subsequent patches. Of course user can ignore presence of TEE_GEN_CAP_REG_MEM flag and try do call those functions. This is okay, driver will register shared buffer in OP-TEE, but any attempts to use this shared buffer will fail. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-29optee: support asynchronous supplicant requestsJens Wiklander1-7/+4
Adds support for asynchronous supplicant requests, meaning that the supplicant can process several requests in parallel or block in a request for some time. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (b2260 pager=y/n) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-29optee: fix invalid of_node_put() in optee_driver_init()Jens Wiklander1-1/+0
The first node supplied to of_find_matching_node() has its reference counter decreased as part of call to that function. In optee_driver_init() after calling of_find_matching_node() it's invalid to call of_node_put() on the supplied node again. So remove the invalid call to of_node_put(). Reported-by: Alex Shi <alex.shi@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: optee: add const to tee_driver_ops and tee_desc structuresBhumika Goyal1-4/+4
Add const to tee_desc structures as they are only passed as an argument to the function tee_device_alloc. This argument is of type const, so declare these structures as const too. Add const to tee_driver_ops structures as they are only stored in the ops field of a tee_desc structure. This field is of type const, so declare these structure types as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: optee: fix uninitialized symbol 'parg'Jens Wiklander1-5/+6
Fixes the static checker warning in optee_release(). error: uninitialized symbol 'parg'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-03-10tee: add OP-TEE driverJens Wiklander1-0/+622
Adds a OP-TEE driver which also can be compiled as a loadable module. * Targets ARM and ARM64 * Supports using reserved memory from OP-TEE as shared memory * Probes OP-TEE version using SMCs * Accepts requests on privileged and unprivileged device * Uses OPTEE message protocol version 2 to communicate with secure world Acked-by: Andreas Dannenberg <dannenberg@ti.com> Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey) Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3) Tested-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-31 15:44:42 +0000