summaryrefslogtreecommitdiffstats
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-25tcm_fc: Check for aborted sequenceMark Rustad1-1/+8
Add a check for an aborted sequence, which has a NULL sequence pointer, to avoid target crashes. The most relevant messages from the crash (entered from video capture) include: BUG: unable to handle kernel paging request at ffffffffffffffdf IP: [<ffffffffa02d514c>] fc_seq_send+0x3c/0x150 [libfc] ... Call Trace: [<ffffffffa0443de6>] ft_queue_data_in+0x266/0x560 [tcm_fc] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser network portal attributeNicholas Bellinger1-0/+79
This patch adds a new network portal attribute for iser, that lives under existing iscsi-target configfs layout at: /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/np/$PORTAL/iser When lio_target_np_store_iser() is enabled, iscsit_tpg_add_network_portal() will attempt to start an rdma_cma network portal for iser-target, only if the external ib_isert module transport has been loaded. When disabled, iscsit_tpg_del_network_portal() will cease iser login service on the network portal, and release any external ib_isert module reference. v4 changes: - Add request_module for ib_isert to lio_target_np_store_iser() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor TX queue logic + export response PDU creationNicholas Bellinger4-304/+370
This patch refactors TX immediate + response queue handling to use the new iscsit_transport API callers, and exports the necessary traditional iscsi PDU response creation functions for iser-target to utilize. This includes: - Add iscsit_build_datain_pdu() for DATAIN PDU init + convert iscsit_build_datain_pdu() - Add iscsit_build_logout_rsp() for LOGOUT_RSP PDU init + convert iscsit_send_logout() - Add iscsit_build_nopin_rsp() for NOPIN_RSP PDU init + convert iscsit_send_nopin() - Add iscsit_build_rsp_pdu() for SCSI_RSP PDU init + convert iscsit_send_response() - Add iscsit_build_task_mgt_rsp for TM_RSP PDU init + convert iscsit_send_task_mgt_rsp() - Refactor immediate queue state switch into iscsit_immediate_queue() - Convert handle_immediate_queue() to use iscsit_transport caller - Refactor response queue state switch into iscsit_response_queue() - Convert handle_response_queue to use iscsit_transport caller - Export iscsit_logout_post_handler(), iscsit_increment_maxcmdsn() and iscsit_tmr_post_handler() for external transport module usage v5 changes: - Fix solicited NopIN handling with RDMAExtensions=No (nab) v3 changes: - Add iscsit_build_reject for REJECT PDU init + convert iscsit_send_reject() v2 changes: - Add iscsit_queue_rsp() for iscsit_transport->iscsit_queue_data_in() and iscsit_transport->iscsit_queue_status() - Update lio_queue_data_in() to use ->iscsit_queue_data_in() - Update lio_queue_status() to use ->iscsit_queue_status() - Use mutex_trylock() in iscsit_increment_maxcmdsn() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor RX PDU logic + export request PDU handlingNicholas Bellinger8-204/+346
This patch refactors existing traditional iscsi RX side PDU handling to use iscsit_transport, and exports the necessary logic for external transport modules. This includes: - Refactor iscsit_handle_scsi_cmd() into PDU setup / processing - Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code - Add iscsit_set_unsoliticed_dataout() wrapper - Refactor iscsit_handle_data_out() into PDU check / processing - Add updated iscsit_handle_data_out() for tradtional iscsi code - Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to accept pre-allocated struct iscsi_cmd - Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport to handle ISTATE_SEND_R2T for TX immediate queue - Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch into iscsi_target_rx_opcode() using iscsit_allocate_cmd() - Turn iscsi_target_rx_thread() process context into NOP for ib_isert side work-queue. v5 changes: - Make iscsit_handle_scsi_cmd() static (Fengguang) - Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab) v3 changes: - Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd after completion v2 changes: - Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes - Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes - Add target_get_sess_cmd() reference counting to iscsit_setup_scsi_cmd() - Add TFO->lio_check_stop_free() fabric API caller - Add export of iscsit_stop_dataout_timer() symbol - Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout() - Convert existing usage of iscsit_build_r2ts_for_cmd() to ->iscsit_get_dataout() - Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd() - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Pass correct dump_payload value into iscsit_get_immediate_data() for iscsit_handle_scsi_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add per transport iscsi_cmd alloc/freeNicholas Bellinger5-5/+26
This patch converts struct iscsi_cmd memory allocation + free to use ->iscsit_alloc_cmd() iscsit_transport API caller, and export iscsit_allocate_cmd() symbols Also add iscsi_cmd->release_cmd() to be used seperately from iscsit_transport for connection/session shutdown. v2 changes: - Remove unnecessary checks in iscsit_alloc_cmd (asias) - Drop iscsit_transport->iscsit_free_cmd() usage - Drop iscsit_transport->iscsit_unmap_cmd() usage - Add iscsi_cmd->release_cmd() - Convert lio_release_cmd() to use iscsi_cmd->release_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser-target parameter keys + setup during loginNicholas Bellinger4-17/+161
This patch adds RDMAExtensions, InitiatorRecvDataSegmentLength and TargetRecvDataSegmentLength parameters keys necessary for iser-target login to occur. This includes setting the necessary parameters during login path code within iscsi_login_zero_tsih_s2(), and currently PAGE_SIZE aligning the target's advertised MRDSL for immediate data and unsolicited data-out incoming payloads. v3 changes: - Add iscsi_post_login_start_timers FIXME for ISER v2 changes: - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Drop unnecessary '== true' conditional checks for type bool Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Initial traditional TCP conversion to iscsit_transportNicholas Bellinger9-315/+380
This patch performs the initial conversion of existing traditional iscsi to use iscsit_transport API callers. This includes: - iscsi-np cleanups for iscsit_transport_type - Add iscsi-np transport calls w/ ->iscsit_setup_up() and ->iscsit_free_np() - Convert login thread process context to use ->iscsit_accept_np() for connections with pre-allocated struct iscsi_conn - Convert existing socket accept code to iscsit_accept_np() - Convert login RX/TX callers to use ->iscsit_get_login_rx() and ->iscsit_put_login_tx() to exchange request/response PDUs - Convert existing socket login RX/TX calls into iscsit_get_login_rx() and iscsit_put_login_tx() - Change iscsit_close_connection() to invoke ->iscsit_free_conn() + iscsit_put_transport() calls. - Add iscsit_register_transport() + iscsit_unregister_transport() calls to module init/exit v4 changes: - Add missing iscsit_put_transport() call in iscsi_target_setup_login_socket() failure case v2 changes: - Update module init/exit to use register_transport() + unregister_transport() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iscsit_transport API templateNicholas Bellinger2-1/+57
Add basic struct iscsit_transport API template to allow iscsi-target for running with external transport modules using existing iscsi_target_core.h code. For all external modules, this calls try_module_get() and module_put() to obtain + release an external iscsit_transport module reference count. Also include the iscsi-target symbols necessary in iscsi_transport.h to allow external transport modules to function. v3 changes: - Add iscsit_build_reject export for ISTATE_SEND_REJECT usage v2 changes: - Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland) - Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE - Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status - Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ - Drop ->iscsit_free_cmd() - Drop ->iscsit_unmap_cmd() - Rename iscsit_create_transport() -> iscsit_register_transport() (andy) - Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add export of target_get_sess_cmd symbolNicholas Bellinger1-2/+2
Export target_get_sess_cmd() symbol so that it can be used by iscsi-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Change default sense key of NOT_READYJörn Engel1-2/+7
As the comment sais, this allows Solaris initiators to survive intermittent errors. The comment from someone reading the Solaris sources seem to imply that multipathing would be broken without this patch as well. Signed-off-by: Joern Engel <joern@logfs.org> Cc: Brian Bunker <brian@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Set is_nonrot attributeAsias He1-0/+3
Set is_nonrot attribute according to the block queue if the backend device is a block device. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add sbc_execute_unmap() helperAsias He3-155/+93
iblock_execute_unmap() and fd_execute_unmap share a lot of code. Add sbc_execute_unmap() helper to remove duplicated code for iblock_execute_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/iblock: Add iblock_do_unmap() helperAsias He1-17/+26
Add helper iblock_do_unmap() to remove duplicated code in iblock_execute_write_same_unmap() and iblock_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Add fd_do_unmap() helperAsias He1-42/+30
Add helper fd_do_unmap() to remove duplicated code in fd_execute_write_same_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Add UNMAP emulation supportAsias He1-0/+111
This patch adds support for emulation of UNMAP within fd_execute_unmap() backend code. If the FILEIO backend is normal file, the emulation uses fallocate to punch hole to reclaim the free space used by the file. If the FILEIO backend is block device, the emulation uses blkdev_issue_discard(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Add WRITE_SAME w/ UNMAP=1 emulation supportAsias He1-5/+89
This patch adds support for emulation of WRITE_SAME w/ UNMAP=1 within fd_execute_write_same_unmap() backend code. If the FILEIO backend is normal file, the emulation uses fallocate to punch hole to reclaim the free space used by the file. If the FILEIO backend is block device, the emulation uses blkdev_issue_discard(). Tested with 512, 1k, 2k, and 4k block_sizes. Changes in v2: - Set the various dev->dev_attrib.*unmap* values (nab) Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25tcm_fc: using kfree_rcu() to simplify the codeWei Yongjun1-8/+1
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/iscsi: Use ISCSI_LOGIN_CURRENT/NEXT_STAGE macrosAndy Grover1-8/+6
Fix bit-clearing in login_rsp->flags for case 0. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/iscsi: Remove chap_set_random()Andy Grover1-27/+1
The result from get_random_bytes should already be random, so further manipulation and mixing should not be needed. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBsNicholas Bellinger1-0/+3
This patch fixes a bug where a handful of informational / control CDBs that should be allowed during ALUA access state Standby/Offline/Transition where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*. This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN registration when LUN scanning occured during these ALUA access states. Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-09tcm: switch to ->show_info()Al Viro1-5/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-28target: Fix RESERVATION_CONFLICT status regression for iscsi-target special caseNicholas Bellinger1-1/+3
This patch fixes a regression introduced in v3.8-rc1 code where a failed target_check_reservation() check in target_setup_cmd_from_cdb() was causing an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation performed by an unregistered / unreserved iscsi initiator port. This regression is only effecting iscsi-target due to a special case check for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(), and was still correctly disallowing WRITE commands from backend submission for unregistered / unreserved initiator ports, while returning the incorrect SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT assignment. This regression was first introduced with: commit de103c93aff0bed0ae984274e5dc8b95899badab Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment during a target_check_reservation() failure, so that iscsi-target code sends the correct SCSI status. All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT call to transport_generic_request_failure() are not effected by this bug. Reported-by: Jeff Leung <jleung@curriegrad2004.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-19target/pscsi: Reject cross page boundary case in pscsi_map_sgAsias He1-3/+8
We can only have one page of data in each sg element, so we can not cross a page boundary. Fail this case. The 'while (len > 0 && data_len > 0) {}' loop is not necessary. The loop can only be executed once. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-19target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/OsNicholas Bellinger1-1/+1
This patch bumps the default FILEIO backend FD_MAX_SECTORS value from 1024 -> 2048 in order to allow block_size=512 to handle 1M sized I/Os. The current default rejects I/Os larger than 512K in sbc_parse_cdb(): [12015.915146] SCSI OP 2ah with too big sectors 1347 exceeds backend hw_max_sectors: 1024 [12015.977744] SCSI OP 2ah with too big sectors 2048 exceeds backend hw_max_sectors: 1024 This issue is present in >= v3.5 based kernels, introduced after the removal of se_task logic. Reported-by: Viljami Ilola <azmulx@netikka.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target: fix possible memory leak in core_tpg_register()Wei Yongjun1-1/+2
'se_tpg->tpg_lun_list' is malloced in core_tpg_register() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. 'se_tpg' is malloced out of this function, and will be freed if we return error, so remove free for 'se_tpg'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target/iscsi: Fix mutual CHAP auth on big-endian archesAndy Grover1-1/+4
See https://bugzilla.redhat.com/show_bug.cgi?id=916290 Used a temp var since we take its address in sg_init_one. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target_core_sbc: use noop for SYNCHRONIZE_CACHEHannes Reinecke1-2/+5
Windows does not expect SYNCHRONIZE_CACHE to be not supported, and will generate a BSOD upon shutdown when using rd_mcp backend. So better use a noop here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-02Merge branch 'for-next' of ↵Linus Torvalds5-11/+15
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target patches from Nicholas Bellinger: "Here are the remaining target-pending patches for v3.9-rc1. The most important one here is the immediate queue starvation regression fix for iscsi-target, which addresses a bug that's effecting v3.5+ kernels under heavy sustained READ only workloads. Thanks alot to Benjamin Estrabaud for helping to track this down! Also included is a pSCSI exception bugfix from Asias, along with a handful of other minor changes. Both bugfixes are CC'ed to stable." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Rename sg_num to nr_vecs in pscsi_get_bio() target/pscsi: Fix page increment target/pscsi: Drop unnecessary NULL assignment to bio->bi_next target: Add __exit annotation for module_exit functions iscsi-target: Fix immediate queue starvation regression with DATAIN
2013-02-27target/pscsi: Rename sg_num to nr_vecs in pscsi_get_bio()Asias He1-2/+2
It is actually a vector not a sg, so nr_vecs is better than sg_num. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27target/pscsi: Fix page incrementAsias He1-1/+0
The page++ is wrong. It makes bio_add_pc_page() pointing to a wrong page address if the 'while (len > 0 && data_len > 0) { ... }' loop is executed more than one once. Signed-off-by: Asias He <asias@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27target/pscsi: Drop unnecessary NULL assignment to bio->bi_nextAsias He1-2/+0
Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27target: Add __exit annotation for module_exit functionsAsias He4-4/+4
Inclues sbp_exit, fileio_module_exit, iblock_module_exit and pscsi_module_exit. Note: rd_module_exit() can not be annotated by __exit, becasue it is called by target_core_init_configfs() which is annotated by __init. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin1-8/+4
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27target/iscsi: convert to idr_alloc()Tejun Heo2-16/+14
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27iscsi-target: Fix immediate queue starvation regression with DATAINNicholas Bellinger1-2/+9
This patch addresses a v3.5+ regression in iscsi-target where TX thread process context -> handle_response_queue() execution is allowed to run unbounded while servicing constant outgoing flow of ISTATE_SEND_DATAIN response state. This ends up preventing memory release of StatSN acknowledged commands in a timely manner when under heavy large block streaming DATAIN workloads. The regression bug was initially introduced with: commit 6f3c0e69a9c20441bdc6d3b2d18b83b244384ec6 Author: Andy Grover <agrover@redhat.com> Date: Tue Apr 3 15:51:09 2012 -0700 target/iscsi: Refactor target_tx_thread immediate+response queue loops Go ahead and follow original iscsi_target_tx_thread() logic and check to break for immediate queue processing after each DataIN Sequence and/or Response PDU has been sent. Reported-by: Benjamin ESTRABAUD <be@mpstor.com> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds3-46/+18
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26Merge branch 'for-next' of ↵Linus Torvalds17-98/+387
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi target updates from Nicholas Bellinger: "The highlights in this series include: - Improve sg_table lookup scalability in RAMDISK_MCP (martin) - Add device attribute to expose config name for INQUIRY model (tregaron) - Convert tcm_vhost to use lock-less list for cmd completion (asias) - Add tcm_vhost support for multiple target's per endpoint (asias) - Add tcm_vhost support for multiple queues per vhost (asias) - Add missing mapped_lun bounds checking during make_mappedlun setup in generic fabric configfs code (jan engelhardt + nab) - Enforce individual iscsi-target network portal export once per TargetName endpoint (grover + nab) - Add WRITE_SAME w/ UNMAP=0 emulation to FILEIO backend (nab) Things have been mostly quiet this round, with majority of the work being done on the iser-target WIP driver + associated iscsi-target refactoring patches currently in flight for v3.10 code. At this point there is one patch series left outstanding from Asias to add support for UNMAP + WRITE_SAME w/ UNMAP=1 to FILEIO awaiting feedback from hch & Co, that will likely be included in a post v3.9-rc1 PULL request if there are no objections. Also, there is a regression bug recently reported off-list that seems to be effecting v3.5 and v3.6 kernels with MSFT iSCSI initiators that is still being tracked down. No word if this effects >= v3.7 just yet, but if so there will likely another PULL request coming your way.." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors target/file: Add WRITE_SAME w/ UNMAP=0 emulation support iscsi-target: Enforce individual network portal export once per TargetName iscsi-target: Refactor iscsit_get_np sockaddr matching into iscsit_check_np_match target: Add missing mapped_lun bounds checking during make_mappedlun setup target: Fix lookup of dynamic NodeACLs during cached demo-mode operation target: Fix parameter list length checking in MODE SELECT target: Fix error checking for UNMAP commands target: Fix sense data for out-of-bounds IO operations target_core_rd: break out unterminated loop during copy tcm_vhost: Multi-queue support tcm_vhost: Multi-target support target: Add device attribute to expose config_item_name for INQUIRY model target: don't truncate the fail intr address target: don't always say "ipv6" as address type target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status iscsi-target: make some temporary buffers larger tcm_vhost: Optimize gup in vhost_scsi_map_to_sgl tcm_vhost: Use iov_num_pages to calculate sgl_count tcm_vhost: Introduce iov_num_pages ...
2013-02-26target: writev() on single-element vector is pointlessAl Viro2-45/+17
... in other news: filp_open() can't return a struct file with NULL dentry filp_open() can't return a struct file negative dentry filp_close() of something that never had been in any descriptor tables is pointless - fput() is all you need Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-23target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectorsRoland Dreier3-6/+6
Trivial, but WRITE SAME is an SBC command so it seems strange for a related function (defined in target_core_sbc.c) to be in the spc_ namespace. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-22new helper: file_inode(file)Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-02-20target/file: Add WRITE_SAME w/ UNMAP=0 emulation supportNicholas Bellinger1-0/+114
This patch adds support for emulation of WRITE_SAME w/ UNMAP=0 within fd_execute_write_same() backend code. The emulation uses vfs_writev() to submit a locally populated buffer from the received WRITE_SAME scatterlist block for duplication, and by default enforces a limit of max_write_same_len=0x1000 (8192) sectors up to the limit of 1024 iovec entries for the single call to vfs_writev(). It also sets max_write_same_len to the operational default at setup -> fd_configure_device() time. Tested with 512, 1k, 2k, and 4k block_sizes. (asias: convert to vzalloc) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-19iscsi-target: Enforce individual network portal export once per TargetNameNicholas Bellinger1-0/+39
This patch enforces individual network portal export on a once per TargetName basis, thus preventing a network portal from being exported multiple times across multiple TargetPortalGroups in a single TargetName instance. This is done in iscsit_tpg_check_network_portal() by walking tiqn->tiqn_tpg_list and tpg->tpg_gnp_list using iscsit_check_np_match() looking for an existing network portal mapping from iscsit_tpg_add_network_portal() context, but only when no pre-existing tpg_np_parent pointer is present. Reported-by: Andy Grover <agrover@redhat.com> Tested-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-19iscsi-target: Refactor iscsit_get_np sockaddr matching into ↵Nicholas Bellinger2-26/+41
iscsit_check_np_match This patch refactors the sockaddr matching logic in iscsit_get_np() into a seperate iscsit_check_np_match() that can be used by external code. Tested-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-18target: Add missing mapped_lun bounds checking during make_mappedlun setupNicholas Bellinger1-0/+8
This patch adds missing bounds checking for the configfs provided mapped_lun value during target_fabric_make_mappedlun() setup ahead of se_lun_acl initialization. This addresses a potential OOPs when using a mapped_lun value that exceeds the hardcoded TRANSPORT_MAX_LUNS_PER_TPG-1 value within se_node_acl->device_list[]. Reported-by: Jan Engelhardt <jengelh@inai.de> Cc: Jan Engelhardt <jengelh@inai.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-18target: Fix lookup of dynamic NodeACLs during cached demo-mode operationNicholas Bellinger4-20/+9
This patch fixes a bug in core_tpg_check_initiator_node_acl() -> core_tpg_get_initiator_node_acl() where a dynamically created se_node_acl generated during session login would be skipped during subsequent lookup due to the '!acl->dynamic_node_acl' check, causing a new se_node_acl to be created with a duplicate ->initiatorname. This would occur when a fabric endpoint was configured with TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1 preventing the release of an existing se_node_acl during se_session shutdown. Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl() within core_dev_init_initiator_node_lun_acl() that originally required the extra '!acl->dynamic_node_acl' check, and just pass the configfs provided se_node_acl pointer instead. Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Fix parameter list length checking in MODE SELECTRoland Dreier1-0/+13
An empty parameter list (length == 0) is not an error, so succeed MODE SELECT in this case. If the parameter list length is too small, return the correct sense code of PARAMETER LIST LENGTH ERROR. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Fix error checking for UNMAP commandsRoland Dreier2-1/+20
SBC-3 (revision 35) says: The PARAMETER LIST LENGTH field specifies the length in bytes of the UNMAP parameter list that is available to be transferred from the Data-Out Buffer. If the parameter list length is greater than zero and less than 0008h (i.e., eight), then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to PARAMETER LIST LENGTH ERROR. A PARAMETER LIST LENGTH set to zero specifies that no data shall be sent. so our sense code for too-short descriptors was wrong, and we were incorrectly failing commands that didn't transfer any descriptors. While we're at it, also handle the UNMAP check: If the ANCHOR bit is set to one, and the ANC_SUP bit in the Logical Block Provisioning VPD page (see 6.6.4) is set to zero, then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB. (chris boot: Fix wrong cut+paste comment in transport_send_check_condition_and_sense) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Fix sense data for out-of-bounds IO operationsRoland Dreier1-1/+1
We're supposed to return LOGICAL BLOCK ADDRESS OUT OF RANGE, not INVALID FIELD IN CDB. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>