Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here's the "big" staging/iio pull request for 4.10-rc1.
Not as big as 4.9 was, but still just over a thousand changes. We
almost broke even of lines added vs. removed, as the slicoss driver
was removed (got a "clean" driver for the same hardware through the
netdev tree), and some iio drivers were also dropped, but I think we
ended up adding a few thousand lines to the source tree in the end.
Other than that it's a lot of minor fixes all over the place, nothing
major stands out at all.
All of these have been in linux-next for a while. There will be a
merge conflict with Al's vfs tree in the lustre code, but the
resolution for that should be pretty simple, that too has been in
linux-next"
* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
staging: comedi: comedidev.h: Document usage of 'detach' handler
staging: fsl-mc: remove unnecessary info prints from bus driver
staging: fsl-mc: add sysfs ABI doc
staging/lustre/o2iblnd: Fix misspelled attemps->attempts
staging/lustre/o2iblnd: Fix misspelling intialized->intialized
staging/lustre: Convert all bare unsigned to unsigned int
staging/lustre/socklnd: Fix whitespace problem
staging/lustre/o2iblnd: Add missing space
staging/lustre/lnetselftest: Fix potential integer overflow
staging: greybus: audio_module: remove redundant OOM message
staging: dgnc: Fix lines longer than 80 characters
staging: dgnc: fix blank line after '{' warnings.
staging/android: remove Sync Framework tasks from TODO
staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
staging: slicoss: remove the staging driver
staging: lustre: libcfs: remove lnet upcall code
staging: lustre: remove set but unused variables
staging: lustre: osc: set lock data for readahead lock
staging: lustre: import: don't reconnect during connect interpret
staging: lustre: clio: remove mtime check in vvp_io_fault_start()
...
|
|
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
|
|
Pull documentation update from Jonathan Corbet:
"These are the documentation changes for 4.10.
It's another busy cycle for the docs tree, as the sphinx conversion
continues. Highlights include:
- Further work on PDF output, which remains a bit of a pain but
should be more solid now.
- Five more DocBook template files converted to Sphinx. Only 27 to
go... Lots of plain-text files have also been converted and
integrated.
- Images in binary formats have been replaced with more
source-friendly versions.
- Various bits of organizational work, including the renaming of
various files discussed at the kernel summit.
- New documentation for the device_link mechanism.
... and, of course, lots of typo fixes and small updates"
* tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits)
dma-buf: Extract dma-buf.rst
Update Documentation/00-INDEX
docs: 00-INDEX: document directories/files with no docs
docs: 00-INDEX: remove non-existing entries
docs: 00-INDEX: add missing entries for documentation files/dirs
docs: 00-INDEX: consolidate process/ and admin-guide/ description
scripts: add a script to check if Documentation/00-INDEX is sane
Docs: change sh -> awk in REPORTING-BUGS
Documentation/core-api/device_link: Add initial documentation
core-api: remove an unexpected unident
ppc/idle: Add documentation for powersave=off
Doc: Correct typo, "Introdution" => "Introduction"
Documentation/atomic_ops.txt: convert to ReST markup
Documentation/local_ops.txt: convert to ReST markup
Documentation/assoc_array.txt: convert to ReST markup
docs-rst: parse-headers.pl: cleanup the documentation
docs-rst: fix media cleandocs target
docs-rst: media/Makefile: reorganize the rules
docs-rst: media: build SVG from graphviz files
docs-rst: replace bayer.png by a SVG image
...
|
|
Document when the "detach" handler function pointed to by the `detach`
member of a `struct comedi_driver` is called by the comedi core, and how
the "attach" and "auto_attach" handlers can defer clean-up to it when
they return an error to the comedi core. This is already mentioned as
part of the documentation for `comedi_auto_config()`, but is useful to
document it for `struct comedi_driver` as well, since
`comedi_auto_config()` is not usually called directly by low-level
comedi drivers, and it is not called at all for "legacy" comedi devices
that are configured manually.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove pr_info/dev_info prints that add unnecessary verbosity
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Highlighted by checkpatch:
WARNING: 'attemps' may be misspelled - perhaps 'attempts'?
#20278: FILE: drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:3272:
+ * reconnection attemps.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Highlighted by checkpatch:
+ if (!ps->ps_net) /* intialized? */
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Highlighted by relatively new checkpatch test, warnings like:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch highlighted there are 8 spaces that could be converted to a tab:
ERROR: code indent should use tabs where possible
+^I^I^I^I^I */$
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch highlighted missing space before assignment
for lock variable.
+ spinlock_t *lock= &kiblnd_data.kib_connd_lock;
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It looks like if the passed in parameter is not present, but
parameter length is non zero, then sanity checks on the length
are skipped and lstcon_test_add() might then use incorrect
allocation that's prone to integer overflow size.
This patch ensures that parameter len is zero if parameter is
not present.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All kmalloc-based functions print enough information on failure
Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For two cases (beginning and end of the patch) I opted to create small
functions instead of breaking the the lines in a weird way.
The other changes are simple ones: either by breaking the line when
appropriate or by turning a comment into a multi-line one.
Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove blank lines between open brace and comment.
Remove blank lines after comment in line with the rest of the comments
of the file.
Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The destaging work is now fully complete.
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Riley Andrews <riandrews@android.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I have been having a lot of unexplainable crashes in osc_lru_shrink
lately that I could not see a good explanation for and then I found
this patch that slip under the radar somehow that incorrectly
converted while loop for lru list iteration into
list_for_each_entry_safe totally ignoring that in the body of
the loop we drop spinlocks guarding this list and move list entries
around.
Not sure why it was not showing up right away, perhaps some of the
more recent LRU changes committed caused some extra pressure on this
code that finally highlighted the breakage.
Reverts: 8adddc36b1fc ("staging: lustre: osc: Use list_for_each_entry_safe")
CC: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A "real" driver for this hardware has now landed in the networking tree,
so remove this old staging driver so that we don't have multiple drivers
for the same hardware, and so people don't waste their time trying to
clean up this old code.
Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing lnet upcall infrastructure completely
as nobody uses it anymore. The upcall causes a delay
before calling BUG() and might even cause a hang
making getting a crash dump unreliable or containing
outdated info.
Signed-off-by: Alexander Zarochentsev <alexander.zarochentsev@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8418
Seagate-bug-id: MRP-2939
Reviewed-on: http://review.whamcloud.com/21440
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove set but unused variables in nidstring.c
and osc_request.c as reported by make W=1.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8378
Reviewed-on: http://review.whamcloud.com/23221
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If osc_io_readahead() finds a lock that belongs to the previous
instance of osc_object, the lock data pointer will be null. It has
to instantiate with new instance otherwise those pages won't be
destroyed at lock cancel, and then finally hit the assertion in
osc_req_attr_set().
This patch revised dlmlock_at_pgoff() to call osc_match_base() to
find caching locks for readahead. And new osc_object will be set
to the lock if it doesn't have one yet.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8005
Reviewed-on: http://review.whamcloud.com/19453
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The import connect flags might be cleared by ptlrpc_connect_import()
wrongly if there is still connect interpret function is running.
Use imp_connected boolean variable to indicate that we are still
interpretting connect reply and don't try to reconnect until it ends.
Signed-off-by: Mikhal Pershin <mike.pershin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7558
Reviewed-on: http://review.whamcloud.com/19312
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In fault IO initialization, inode's mtime is saved, and after
getting locks, when the IO is about to start, vvp_io_fault_start()
checks the mtime's intactness.
It's a false alarm, since the timestamp from MDS could be stale,
we maintain mtime mainly on OST objects, and if the check in
vvp_io_fault_start() happens before mtime on OST objects are merged,
it will get wrong timestamp from the inode, even the timestamp it
fetched in vvp_io_fault_init() could be wrong in the first place.
This patch remove the mtime check in vvp_io_fault_start().
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7198
Reviewed-on: http://review.whamcloud.com/19162
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only update file times if page_mkwrite is not set. So we
need call file_update_time by ourselves.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1118
Reviewed-on: http://review.whamcloud.com/18683
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To make the ptlrpc be able to size 16MB IO
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Gu Zheng <gzheng@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7990
Reviewed-on: http://review.whamcloud.com/19366
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is the sponsor thread of the statahead thread to update the
sai::sai_index_wait. Originally, it didn't hold the lli_sa_lock
when did that. Becuase of out-of-order execution others may miss
to wakeup such thread.
On the other hand, if the statahead RPC gets failure, it should
wakeup the sponsor thread, not the statahead thread.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7828
Reviewed-on: http://review.whamcloud.com/18499
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allocating a big hash table using the current formula
does not really work for clients. We will create new
hash table for each mount on a single client which is
a lot of memory more than expected.
This patch limits the hash table up to 8M for clients,
which has 524288 entries.
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7689
Reviewed-on: http://review.whamcloud.com/18048
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When Lustre servers enable 'suppress_pings', all clients will stop
pinging. However, some clients may not have external mechanism
to notify Lustre servers for node death and therefore need to
preserve the Lustre ping.
This patch provides a mount option 'always_ping' so that the
client will not stop pinging even if the server has enabled
'suppress_pings'.
Signed-off-by: Wally Wang <wang@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6391
Reviewed-on: http://review.whamcloud.com/14127
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Chris Horn <hornc@cray.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ras_window_len should only be updated in ras_update() by read
pattern and it can't be adjusted in ll_readahead() at all;
ras_consecutive_pages is used to detect read pattern from
mmap. It will be used to increase read ahead window length
gradually.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5505
Reviewed-on: http://review.whamcloud.com/11528
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
if the callers wants to purge all objects, then scanning
should start from the first bucket.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7038
Reviewed-on: http://review.whamcloud.com/18505
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In ll_dir_ioctl() two identical comparisions are present for
return code (rc) of ll_dir_getstripe(). This patch removes
the other inside if( ) condition which is not necessary.
Signed-off-by: Parinay Kondekar <parinay.kondekar@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6512
Reviewed-on: http://review.whamcloud.com/18027
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add more debugging info.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7084
Reviewed-on: http://review.whamcloud.com/17673
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
O_WRONLY/O_RDWR open on a file will get EROFS on a read only client,
but the rpc gets sent to the mdt anyway.
mdt will increase the mot_write_count of the mdt object, blocking
subsequent FMODE_EXEC open to the same file.
This patch makes sure we fail the FMODE_WRITE open with EROFS on the
client straight away without sending the rpc to mdt.
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7727
Reviewed-on: http://review.whamcloud.com/18242
Reviewed-by: Ian Costello <icostello@ddn.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Once update request fails due to eviction or other failures,
all of update request in the sending list should return fail,
because after the failure, the update log in the following
request will have wrong llog bitmap.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7039
Reviewed-on: http://review.whamcloud.com/16969
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During intent open, it was found that if the parent has
been migrated to another MDT, it should retry the open
request with the new object, so it needs to keep the
old object in the orphan list, which will be cleanup
during next recovery. Note: if the client still using
the old FID after next recovery, it will return -ENOENT
for the application. Also enqueue the lease lock of
the migrating file, then compare the lease before
migration to make sure no other clients open the file
at the same time.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6475
Reviewed-on: http://review.whamcloud.com/14497
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Corrected newline specifier in debug log message.
Signed-off-by: Ashish Purkar <ashish.purkar@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7029
Reviewed-on: http://review.whamcloud.com/16046
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This flag should be cleared atomically after the op_data flag
MDS_DATA_MODIFIED is packed. Otherwise, if there exists an
operation to dirty the file again, the state may be missed on
the MDT.
Stop using spin lock lli_lock to protect operations of changing
file flags; using bit operations instead.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6377
Reviewed-on: http://review.whamcloud.com/14100
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want to "sever" all the ways to get a new pointer to "pg".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes following Sparse errors.
lprocfs_status.c:1568:5: error: symbol 'lprocfs_wr_root_squash' redeclared with different type...
lprocfs_status.c:1632:5: error: symbol 'lprocfs_wr_nosquash_nids' redeclared with different type...
Signed-off-by: Sandeep Jain <sandeepjain.linux@gmail.com>
Acked-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix following sparse warning.
mgc_request.c:376:1:
warning: symbol 'llog_process_lock' was not declared. Should it be static?
Signed-off-by: Sandeep Jain <sandeepjain.linux@gmail.com>
Acked-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At the end of function lstcon_group_info(), "return 0" seems improper.
It may be better to return the value of rc.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188811
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Early launch page LRU work in osc_io_rw_iter_init();
Change the page LRU shrinking policy by OSC attributes;
Delete the contented lock osc_object::oo_seatbelt
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5108
Reviewed-on: http://review.whamcloud.com/10458
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Create the inline function cli_name() to get the name
of the OSC device.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5108
Reviewed-on: http://review.whamcloud.com/10458
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add new information about the fields in struct client_obd.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5108
Reviewed-on: http://review.whamcloud.com/10458
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It was found if you sort the headers alphabetically
that it reduced patch conflicts. This patch sorts
the headers alphabetically and also place linux
header first, then uapi header and finally the
lustre kernel headers.
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: http://review.whamcloud.com/16339
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Create headers for pack_generic.c and llog_swab.c
Reference only where needed. This separates out
the kernel only code from lustre_idl.h that is
an UAPI header.
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: http://review.whamcloud.com/16339
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed 2 coding style errors about trailing whitespaces.
Signed-off-by: Manoj Sawai <mas@iitkgp.ac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed checkpatch.pl errors related to "space prohibited after that '*'
or '&'" in ks_wlan_net.c file.
Signed-off-by: Yamanappagouda Patil <goudapatilk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed checkpatch.pl warnings 'Missing blank line after declaration'
in ks_wlan_net.c file.
Signed-off-by: Yamanappagouda Patil <goudapatilk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up the code in inline functions that deal with page and
range addresses. Use bool instead of int for boolean return
types and remove superfluous brackets.
Signed-off-by: Guillaume Tucker <guillaume.tucker@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert range_size and range_on_lru macros to inline functions to
fix checkpatch check:
CHECK: Macro argument reuse 'range' - possible side-effects?
Signed-off-by: Guillaume Tucker <guillaume.tucker@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|