summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-sprd-adi.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-26spi: sprd: Add ADI r3 supportChunyan Zhang1-50/+165
ADI r3p0 is used on SC9863 and UMS512 SoCs. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20210826091549.2138125-3-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-26spi: sprd: Fix the wrong WDG_LOAD_VALChunyan Zhang1-1/+1
Use 50ms as default timeout value and the time clock is 32768HZ. The original value of WDG_LOAD_VAL is not correct, so this patch fixes it. Fixes: ac1775012058 ("spi: sprd: Add the support of restarting the system") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210826091549.2138125-2-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: fill offset only to RD_CMD register for reading from slave deviceChunyan Zhang1-6/+5
RD_CMD can accept slave address offset only, higher bits are reserved. Writing the whole slave address including slave base seems unnecessary. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-3-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: Make sure offset not equal to slave address sizeChunyan Zhang1-1/+1
The slave register offset shouldn't equal to the max slave address which ADI can support to access. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-2-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: Pass offset instead of physical address to adi_read/_write()Chunyan Zhang1-61/+44
The register offset would be added a physical address base and then pass to the function sprd_adt_read()/_write() each time before calling them. So we can do that within these two functions instead, that would make the code more clear. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24spi: sprd: Fix checkpatch spacing errorJay Fang1-1/+1
Fix checkpatch error: ERROR: space prohibited before that close parenthesis ')' #213: FILE: spi-sprd-adi.c:213: + rd_addr = (val & RD_ADDR_MASK ) >> RD_ADDR_SHIFT; Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-3-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-14spi: sprd: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+1
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Link: https://lore.kernel.org/r/20200910160706.5883-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-02spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGHLingling Xu1-1/+1
The watchdog counter consists of WDG_LOAD_LOW and WDG_LOAD_HIGH, which would be loaded to watchdog counter once writing WDG_LOAD_LOW. Fixes: ac1775012058 ("spi: sprd: Add the support of restarting the system") Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20200602082415.5848-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-14spi: sprd: adi: Use IS_ENABLED() to validate configsBaolin Wang1-1/+1
If the Spreadtrum wachdog is loaded as a module, we still need set default watchdog reboot mode in case the rebooting is caused by watchdog. But now we can not set the watchdog reboot mode by using '#ifdef' to validate the watchdog configuration, thus we can change to use IS_ENABLED() to fix this issue. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/e38807eadd5550add8eb90dd3f8fbe2cfc39cc13.1586759322.git.baolin.wang7@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-28spi: sprd: adi: Set BIT_WDG_NEW bit when rebootingLingling Xu1-0/+5
When rebooting system, the PMIC watchdog time loading may not be loaded correctly when another system is feeding the PMIC watchdog, since we did not check the watchdog busy status before loading time values. Thus we should set the BIT_WDG_NEW bit before loading time values, that can support multiple loads without checking busy status to make sure the time values can be loaded successfully to avoid this potential issue. Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/5655318a7252c9ea518c2f7950a61228ab8f42bf.1572257085.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-28spi: sprd: adi: Add missing lock protection when rebootingLingling Xu1-0/+3
When rebooting the system, we should lock the watchdog after configuration to make sure the watchdog can reboot the system successfully. Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/7b04711127434555e3a1a86bc6be99860cd86668.1572257085.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26spi: sprd: adi: Change hwlock to be optionalBaolin Wang1-26/+42
Now Spreadtrum ADI controller supplies multiple master accessing channel to support multiple subsystems accessing, instead of using a hardware spinlock to synchronize between the multiple subsystems. To keep backward compatibility, we should change the hardware spinlock to be optional. Moreover change to use of_hwspin_lock_get_id() function which return -ENOENT error number to indicate no hwlock support. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/2abe7dcf210e4197f8c5ece7fc6d6cc1eda8c655.1564125131.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26spi: sprd: adi: Add a reset reason for watchdog modeSherry Zong1-0/+15
When the system was rebooted by watchdog, now we did not save the watchdog reset mode which will make system enter a incorrect mode after rebooting. Thus we should set the watchdog reset mode as default when opening the watchdog configuration, that means if the system was rebooted by other reason through the restart_handler(), then we will clear the default watchdog reset mode to save the correct reset mode. Signed-off-by: Sherry Zong <sherry.zong@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/1563f3de43c6c2262d597a25d6138b5de61ea23d.1564125131.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26spi: sprd: adi: Add a reset reason for factory test modeSherry Zong1-0/+3
Add a new reset flag to indicate that the system need enter factory test mode after restarting system. Signed-off-by: Sherry Zong <sherry.zong@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/8ae5651e876b527920ff878721a8a8ef47b099ac.1564125131.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26spi: sprd: adi: Add a reset reason for TOS panicChenxu Wei1-0/+3
Add a new reset flag to indicate the reset reason is caused by TOS. Signed-off-by: Chenxu Wei <weicx@spreadst.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/97583aad1f2b849d69b4e76e8d29113da72a9fff.1564125131.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26spi: sprd: adi: Remove redundant address bits settingBaolin Wang1-3/+0
The ADI default transfer address bits is 12bit on Spreadtrum SC9860 platform, thus there is no need to set again, remove it. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/3cb57b8aadb7747a9f833e9b4fe8596ba738d9f6.1564125131.git.baolin.wang@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-26spi: sprd: Change to use devm_hwspin_lock_request_specific()Baolin Wang1-6/+3
Change to use devm_hwspin_lock_request_specific() instead of freeing the hwlock explicitly when unbound the device. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()Baolin Wang1-1/+1
Now the hwlock core has supplied new function to get a specific hwlock id by one hwlock name, which is more clear for users. So change to use of_hwspin_lock_get_id_byname(). Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-21spi: sprd: Add the support of restarting the systemBaolin Wang1-0/+112
On Spreadtrum platform, we use one PMIC watchdog to reset the whole system with loading one suitable timeout value (usually 50ms) for the watchdog. In theory, we should implement the restart function in drivers/power/reset subsystem to access the PMIC watchdog with regmap. When restart the system, other cores will be stopped by IPI, but if other cores were accessing PMIC with holding the regmap mutex lock, that will cause dead-lock issue if we try to access the PMIC watchdog with regmap to restart the whole system. Thus we can implement the restart function in ADI driver to avoid this issue. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-21spi: sprd: Simplify the transfer functionBaolin Wang1-29/+35
We can move the hardware spinlock protection into the ADI read/write functions to simplify the sprd_adi_transfer_one() function. Moreover this optimization can also help to access PMIC without considering the hardware spinlock using sprd_adi_read/write() functions. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-25spi: sprd: Fix the possible negative value of BIT()Baolin Wang1-1/+1
When enabling the ADI hardware channels, if the channel id is 31, then we will get one negative value -1 for BIT() macro, which will write incorrect value to register. Fixes: 7e2903cb91df ("spi: Add ADI driver for Spreadtrum platform") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13spi: sprd-adi: fix platform_no_drv_owner.cocci warningsWu Fengguang1-1/+0
drivers/spi/spi-sprd-adi.c:409:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Fixes: 7e2903cb91df ("spi: Add ADI driver for Spreadtrum platform") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-25spi: sprd-adi: silence an uninitialized variable warningDan Carpenter1-1/+1
If of_get_property() fails then "size" is uninitialized and it leads to a static checker warning: drivers/spi/spi-sprd-adi.c:288 sprd_adi_hw_init() error: uninitialized symbol 'size'. We can silence the warning by re-arranging the order of these checks. It obviously doesn't affect runtime at all. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-25spi: sprd-adi: checking for NULL instead of IS_ERR()Dan Carpenter1-2/+2
devm_ioremap_resource() returns error pointers, it never returns NULL. Fixes: 7e2903cb91df ("spi: Add ADI driver for Spreadtrum platform") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-19spi: Add ADI driver for Spreadtrum platformBaolin Wang1-0/+419
This patch adds ADI driver based on SPI framework for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Mark Brown <broonie@kernel.org>