summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/st.c
AgeCommit message (Collapse)AuthorFilesLines
2016-04-25st: clear ILI if Medium ErrorKai Makisara1-3/+6
Some drives set the ILI flag together with MEDIUM ERROR sense code. Clear the ILI flag in this case so that the medium error will be handled. The problem was reported by Maurizio Lombardi. Signed-off-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-2/+2
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-20Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...
2016-02-23st: Fix MTMKPART to work with newer drivesKai Makisara1-11/+111
Change the MTMKPART operation of the MTIOCTOP ioctl so that it works also with current drives (LTO-5/6, etc.). Send a separate FORMAT MEDIUM command if the partition mode page indicates that this is required. Use LOAD to position the tape at the beginning of tape. The operation is extended so that if the argument is negative, its absolute value specifies the size of partition 0, which is the physically first partition of the tape. Signed-off-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Tested-by: Shane M Seymour <shane.seymour@hpe.com> Tested-by: Laurence Oberman <loberman@redhat.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-16mm/gup: Switch all callers of get_user_pages() to not pass tsk/mmDave Hansen1-2/+0
We will soon modify the vanilla get_user_pages() so it can no longer be used on mm/tasks other than 'current/current->mm', which is by far the most common way it is called. For now, we allow the old-style calls, but warn when they are used. (implemented in previous patch) This patch switches all callers of: get_user_pages() get_user_pages_unlocked() get_user_pages_locked() to stop passing tsk/mm so they will no longer see the warnings. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-03Merge branch 'mkp-fixes' into fixesJames Bottomley1-2/+3
2015-11-19st: fix potential null pointer dereference.Maurizio Lombardi1-2/+3
If cdev_add() returns an error, the code calls cdev_del() passing the STm->cdevs[rew] pointer as parameter; the problem is that the pointer has not been initialized yet. This patch fixes the problem by moving the STm->cdevs[rew] pointer initialization before the call to cdev_add(). It also sets STm->devs[rew] and STm->cdevs[rew] to NULL in case of failure. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09st: allow debug output to be enabled or disabled via sysfsSeymour, Shane M1-0/+30
Change st driver to allow enabling or disabling debug output via sysfs file /sys/bus/scsi/drivers/st/debug_flag. Previously the only way to enable debug output was: 1. loading the driver with the module parameter debug_flag=1 2. an ioctl call (this method was also the only way to dynamically disable debug output). To use the ioctl you need a second tape drive (if you are actively testing the first tape drive) since a second process cannot open the first tape drive if it is in use. The this change is only functional if the value of the macro DEBUG in st.c is a non-zero value (which it is by default). Signed-off-by: Shane Seymour <shane.seymour@hpe.com> Reviewed-by: Laurence Oberman <oberman.l@gmail.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26st: Destroy st_index_idr on module exitJohannes Thumshirn1-0/+1
Destroy st_index_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12st: convert DRIVER_ATTR macros to DRIVER_ATTR_ROSeymour, Shane M1-12/+12
Convert DRIVER_ATTR macros to DRIVER_ATTR_RO requested by Greg KH. Also switched to using scnprintf instead of snprintf per Documentation/filesystems/sysfs.txt. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shane Seymour <shane.seymour@hp.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12st: convert to using driver attr groups for sysfsSeymour, Shane M1-48/+10
This patch changes the st driver to use attribute groups so driver sysfs files are created automatically. See the following for reference: http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ Signed-off-by: Shane Seymour <shane.seymour@hp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-07-16st: null pointer dereference panic caused by use after kref_put by st_openSeymour, Shane M1-1/+1
Two SLES11 SP3 servers encountered similar crashes simultaneously following some kind of SAN/tape target issue: ... qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-8009:3: DEVICE RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: DEVICE RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8009:3: TARGET RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: TARGET RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8012:3: BUS RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-802b:3: BUS RESET SUCCEEDED nexus=3:0:2. qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8018:3: ADAPTER RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-00af:3: Performing ISP error recovery - ha=ffff88bf04d18000. rport-3:0-0: blocked FC remote port time out: removing target and saving binding qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8017:3: ADAPTER RESET SUCCEEDED nexus=3:0:2. rport-2:0-0: blocked FC remote port time out: removing target and saving binding sg_rq_end_io: device detached BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 IP: [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 PGD 7e6586f067 PUD 7e5af06067 PMD 0 [1739975.390354] Oops: 0002 [#1] SMP CPU 0 ... Supported: No, Proprietary modules are loaded [1739975.390463] Pid: 27965, comm: ABCD Tainted: PF X 3.0.101-0.29-default #1 HP ProLiant DL580 Gen8 RIP: 0010:[<ffffffff8133b268>] [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 RSP: 0018:ffff8839dc1e7c68 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff883f0592fc00 RCX: 0000000000000090 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000138 RBP: 0000000000000138 R08: 0000000000000010 R09: ffffffff81bd39d0 R10: 00000000000009c0 R11: ffffffff81025790 R12: 0000000000000001 R13: ffff883022212b80 R14: 0000000000000004 R15: ffff883022212b80 FS: 00007f8e54560720(0000) GS:ffff88407f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000002a8 CR3: 0000007e6ced6000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ABCD (pid: 27965, threadinfo ffff8839dc1e6000, task ffff883592e0c640) Stack: ffff883f0592fc00 00000000fffffffa 0000000000000001 ffff883022212b80 ffff883eff772400 ffffffffa03fa309 0000000000000000 0000000000000000 ffffffffa04003a0 ffff883f063196c0 ffff887f0379a930 ffffffff8115ea1e Call Trace: [<ffffffffa03fa309>] st_open+0x129/0x240 [st] [<ffffffff8115ea1e>] chrdev_open+0x13e/0x200 [<ffffffff811588a8>] __dentry_open+0x198/0x310 [<ffffffff81167d74>] do_last+0x1f4/0x800 [<ffffffff81168fe9>] path_openat+0xd9/0x420 [<ffffffff8116946c>] do_filp_open+0x4c/0xc0 [<ffffffff8115a00f>] do_sys_open+0x17f/0x250 [<ffffffff81468d92>] system_call_fastpath+0x16/0x1b [<00007f8e4f617fd0>] 0x7f8e4f617fcf Code: eb d3 90 48 83 ec 28 40 f6 c6 04 48 89 6c 24 08 4c 89 74 24 20 48 89 fd 48 89 1c 24 4c 89 64 24 10 41 89 f6 4c 89 6c 24 18 74 11 <f0> ff 8f 70 01 00 00 0f 94 c0 45 31 ed 84 c0 74 2b 4c 8d a5 a0 RIP [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 RSP <ffff8839dc1e7c68> CR2: 00000000000002a8 Analysis reveals the cause of the crash to be due to STp->device being NULL. The pointer was NULLed via scsi_tape_put(STp) when it calls scsi_tape_release(). In st_open() we jump to err_out after scsi_block_when_processing_errors() completes and returns the device as offline (sdev_state was SDEV_DEL): 1180 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host 1181 module count. */ 1182 static int st_open(struct inode *inode, struct file *filp) 1183 { 1184 int i, retval = (-EIO); 1185 int resumed = 0; 1186 struct scsi_tape *STp; 1187 struct st_partstat *STps; 1188 int dev = TAPE_NR(inode); 1189 char *name; ... 1217 if (scsi_autopm_get_device(STp->device) < 0) { 1218 retval = -EIO; 1219 goto err_out; 1220 } 1221 resumed = 1; 1222 if (!scsi_block_when_processing_errors(STp->device)) { 1223 retval = (-ENXIO); 1224 goto err_out; 1225 } ... 1264 err_out: 1265 normalize_buffer(STp->buffer); 1266 spin_lock(&st_use_lock); 1267 STp->in_use = 0; 1268 spin_unlock(&st_use_lock); 1269 scsi_tape_put(STp); <-- STp->device = 0 after this 1270 if (resumed) 1271 scsi_autopm_put_device(STp->device); 1272 return retval; The ref count for the struct scsi_tape had already been reduced to 1 when the .remove method of the st module had been called. The kref_put() in scsi_tape_put() caused scsi_tape_release() to be called: 0266 static void scsi_tape_put(struct scsi_tape *STp) 0267 { 0268 struct scsi_device *sdev = STp->device; 0269 0270 mutex_lock(&st_ref_mutex); 0271 kref_put(&STp->kref, scsi_tape_release); <-- calls this 0272 scsi_device_put(sdev); 0273 mutex_unlock(&st_ref_mutex); 0274 } In scsi_tape_release() the struct scsi_device in the struct scsi_tape gets set to NULL: 4273 static void scsi_tape_release(struct kref *kref) 4274 { 4275 struct scsi_tape *tpnt = to_scsi_tape(kref); 4276 struct gendisk *disk = tpnt->disk; 4277 4278 tpnt->device = NULL; <<<---- where the dev is nulled 4279 4280 if (tpnt->buffer) { 4281 normalize_buffer(tpnt->buffer); 4282 kfree(tpnt->buffer->reserved_pages); 4283 kfree(tpnt->buffer); 4284 } 4285 4286 disk->private_data = NULL; 4287 put_disk(disk); 4288 kfree(tpnt); 4289 return; 4290 } Although the problem was reported on SLES11.3 the problem appears in linux-next as well. The crash is fixed by reordering the code so we no longer access the struct scsi_tape after the kref_put() is done on it in st_open(). Signed-off-by: Shane Seymour <shane.seymour@hp.com> Signed-off-by: Darren Lavender <darren.lavender@hp.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-02st: implement tape statisticsSeymour, Shane M1-1/+271
This patch implements tape statistics in the st module via sysfs. Current no statistics are available for tape I/O and there is no easy way to reuse the block layer statistics for tape as tape is a character device and does not have perform I/O in sector sized chunks (the size of the data written to tape can change). For tapes we also need extra stats related to things like tape movement (via other I/O). There have been multiple end users requesting statistics including AT&T (and some HP customers who have not given permission to be named). It is impossible for them to investigate any issues related to tape performance in a non-invasive way. [jejb: eliminate PRId64] Signed-off-by: Shane Seymour <shane.seymour@hp.com> Tested-by: Shane Seymour <shane.seymour@hp.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-02-11mm: gup: use get_user_pages_unlockedAndrea Arcangeli1-5/+2
This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to the page fault in order to release the mmap_sem during the I/O. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-24scsi: remove scsi_driver owner fieldChristoph Hellwig1-1/+1
The driver core driver structure has grown an owner field and now requires it to be set for all modular drivers. Set it up for all scsi_driver instances and get rid of the now superflous scsi_driver owner field. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Shane M Seymour <shane.seymour@hp.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12st: call scsi_set_medium_removal directlyChristoph Hellwig1-7/+6
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: split scsi_nonblockable_ioctlChristoph Hellwig1-4/+3
The calling conventions for this function are bad as it could return -ENODEV both for a device not currently online and a not recognized ioctl. Add a new scsi_ioctl_block_when_processing_errors function that wraps scsi_block_when_processing_errors with the a special case for the SG_SCSI_RESET ioctl command, and handle the SG_SCSI_RESET case itself in scsi_ioctl. All callers of scsi_ioctl now must call the above helper to check for the EH state, so that the ioctl handler itself doesn't have to. Reported-by: Robert Elliott <Elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: use sdev as argument for sense code printingHannes Reinecke1-2/+4
We should be using the standard dev_printk() variants for sense code printing. [hch: remove __scsi_print_sense call in xen-scsiback, Acked by Juergen] [hch: folded bracing fix from Dan Carpenter] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: introduce sdev_prefix_printk()Hannes Reinecke1-2/+1
Like scmd_printk(), but the device name is passed in as a string. Can be used by eg ULDs which do not have access to the scsi_cmnd structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12st: add a debug_flag module parameter requestLaurence Oberman1-1/+15
This patch adds a debug_flag parameter that can be set on module load, and allows the DEBUG facility without a module recompile. Note that now DEBUG 1 is the default with this patch. Usage: modprobe st debug_flag=1 Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Kai M??kisara <kai.makisara@kolumbus.fi> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-18Merge branch 'for-3.18/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull core block layer changes from Jens Axboe: "This is the core block IO pull request for 3.18. Apart from the new and improved flush machinery for blk-mq, this is all mostly bug fixes and cleanups. - blk-mq timeout updates and fixes from Christoph. - Removal of REQ_END, also from Christoph. We pass it through the ->queue_rq() hook for blk-mq instead, freeing up one of the request bits. The space was overly tight on 32-bit, so Martin also killed REQ_KERNEL since it's no longer used. - blk integrity updates and fixes from Martin and Gu Zheng. - Update to the flush machinery for blk-mq from Ming Lei. Now we have a per hardware context flush request, which both cleans up the code should scale better for flush intensive workloads on blk-mq. - Improve the error printing, from Rob Elliott. - Backing device improvements and cleanups from Tejun. - Fixup of a misplaced rq_complete() tracepoint from Hannes. - Make blk_get_request() return error pointers, fixing up issues where we NULL deref when a device goes bad or missing. From Joe Lawrence. - Prep work for drastically reducing the memory consumption of dm devices from Junichi Nomura. This allows creating clone bio sets without preallocating a lot of memory. - Fix a blk-mq hang on certain combinations of queue depths and hardware queues from me. - Limit memory consumption for blk-mq devices for crash dump scenarios and drivers that use crazy high depths (certain SCSI shared tag setups). We now just use a single queue and limited depth for that" * 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits) block: Remove REQ_KERNEL blk-mq: allocate cpumask on the home node bio-integrity: remove the needless fail handle of bip_slab creating block: include func name in __get_request prints block: make blk_update_request print prefix match ratelimited prefix blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio block: fix alignment_offset math that assumes io_min is a power-of-2 blk-mq: Make bt_clear_tag() easier to read blk-mq: fix potential hang if rolling wakeup depth is too high block: add bioset_create_nobvec() block: use bio_clone_fast() in blk_rq_prep_clone() block: misplaced rq_complete tracepoint sd: Honor block layer integrity handling flags block: Replace strnicmp with strncasecmp block: Add T10 Protection Information functions block: Don't merge requests if integrity flags differ block: Integrity checksum flag block: Relocate bio integrity flags block: Add a disk flag to block integrity profile block: Add prefix to block integrity profile flags ...
2014-09-15scsi: balance out autopm get/put calls in scsi_sysfs_add_sdev()Subhash Jadavani1-0/+2
SCSI Well-known logical units generally don't have any scsi driver associated with it which means no one will call scsi_autopm_put_device() on these wlun scsi devices and this would result in keeping the corresponding scsi device always active (hence LLD can't be suspended as well). Same exact problem can be seen for other scsi device representing normal logical unit whose driver is yet to be loaded. This patch fixes the above problem with this approach: - make the scsi_autopm_put_device call at the end of scsi_sysfs_add_sdev to make it balance out the get earlier in the function. - let drivers do paired get/put calls in their probe methods. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-28block,scsi: fixup blk_get_request dead queue scenariosJoe Lawrence1-1/+1
The blk_get_request function may fail in low-memory conditions or during device removal (even if __GFP_WAIT is set). To distinguish between these errors, modify the blk_get_request call stack to return the appropriate ERR_PTR. Verify that all callers check the return status and consider IS_ERR instead of a simple NULL pointer check. For consistency, make a similar change to the blk_mq_alloc_request leg of blk_get_request. It may fail if the queue is dead, or the caller was unwilling to wait. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Jiri Kosina <jkosina@suse.cz> [for pktdvd] Acked-by: Boaz Harrosh <bharrosh@panasas.com> [for osd] Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-17scsi: Implement st_printk()Hannes Reinecke1-294/+311
Update the st driver to use dev_printk() variants instead of plain printk(); this will prefix logging messages with the appropriate device. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-06block: add blk_rq_set_block_pc()Jens Axboe1-1/+1
With the optimizations around not clearing the full request at alloc time, we are leaving some of the needed init for REQ_TYPE_BLOCK_PC up to the user allocating the request. Add a blk_rq_set_block_pc() that sets the command type to REQ_TYPE_BLOCK_PC, and properly initializes the members associated with this type of request. Update callers to use this function instead of manipulating rq->cmd_type directly. Includes fixes from Christoph Hellwig <hch@lst.de> for my half-assed attempt. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-03-15[SCSI] st: fix corruption of the st_modedef structures in st_set_options()Maurizio Lombardi1-2/+9
When copying the st_modedef structures the devs pointers must be preserved in the same way as with the cdevs pointers. This fixes bug 70271: https://bugzilla.kernel.org/show_bug.cgi?id=70271 [ 135.037052] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 135.045048] IP: [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150 [ 135.050999] PGD 220623067 PUD 222171067 PMD 0 [ 135.055593] Oops: 0000 [#1] SMP [ 135.058938] Modules linked in: bnx2fc cnic uio fcoe libfcoe libfc 8021q mrp scsi_transport_fc garp scsi_tgt stp llc binfmt_misc dm_round_robin dm_multipath uinput iTCO_wdt iTCO_vendor_support microcode sg pcspkr serio_raw osst st(-) i2c_i801 lpc_ich mfd_core e1000e ptp pps_core ipmi_si ipmi_msghandler video tpm_infineon ext4(F) jbd2(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) sr_mod(F) cdrom(F) pata_acpi(F) ata_generic(F) ata_piix(F) libata(F) mpt2sas(F) scsi_transport_sas(F) raid_class(F) ast(F) ttm(F) drm_kms_helper(F) drm(F) i2c_algo_bit(F) sysimgblt(F) sysfillrect(F) i2c_core(F) syscopyarea(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F) [ 135.119686] CPU: 2 PID: 2028 Comm: rmmod Tainted: GF 3.14.0-rc1-linux-mainline+ #14 [ 135.128453] Hardware name: wortmann To be filled by O.E.M./P8B-M Series, BIOS 6103 12/06/2012 [ 135.137127] task: ffff880001de29d0 ti: ffff8802206e4000 task.ti: ffff8802206e4000 [ 135.144742] RIP: 0010:[<ffffffff812af6a1>] [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150 [ 135.153148] RSP: 0018:ffff8802206e5c98 EFLAGS: 00010282 [ 135.158562] RAX: ffff880001de29d0 RBX: 0000000000000000 RCX: 0000000000000006 [ 135.165814] RDX: 0000000000000000 RSI: ffffffff817627e0 RDI: 0000000000000000 [ 135.173040] RBP: ffff8802206e5cc8 R08: 0000000000000000 R09: 0000000000000001 [ 135.180303] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff817627e0 [ 135.187554] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [ 135.194774] FS: 00007f817c720700(0000) GS:ffff880227200000(0000) knlGS:0000000000000000 [ 135.202995] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.208878] CR2: 0000000000000098 CR3: 00000002219b0000 CR4: 00000000000407e0 [ 135.216139] Stack: [ 135.218185] ffffffff81af63a0 0000000000000000 ffffffff817627e0 0000000000000000 [ 135.225783] 0000000000000000 0000000000000001 ffff8802206e5cf8 ffffffff812af8de [ 135.233347] ffff880226801900 ffffffff81b43320 0000000000000000 ffff880221a7c1c0 [ 135.240972] Call Trace: [ 135.243463] [<ffffffff812af8de>] kernfs_find_and_get_ns+0x3e/0x70 [ 135.249743] [<ffffffff812ae27d>] sysfs_unmerge_group+0x1d/0x60 [ 135.255716] [<ffffffff81464da9>] pm_qos_sysfs_remove_latency+0x19/0x20 [ 135.262430] [<ffffffff81466a91>] dev_pm_qos_constraints_destroy+0x31/0x1e0 [ 135.269500] [<ffffffff81464de6>] dpm_sysfs_remove+0x16/0x50 [ 135.275263] [<ffffffff8145c077>] device_del+0x47/0x1e0 [ 135.280554] [<ffffffff8145c232>] device_unregister+0x22/0x60 [ 135.286406] [<ffffffffa02e23bd>] remove_cdevs+0x4d/0x90 [st] [ 135.292247] [<ffffffffa02e78ff>] st_remove+0x3f/0xb0 [st] [ 135.297851] [<ffffffff8145f39f>] __device_release_driver+0x7f/0xf0 [ 135.304237] [<ffffffff8145f4e8>] driver_detach+0xd8/0xe0 [ 135.309722] [<ffffffff8145e0fc>] bus_remove_driver+0x5c/0xd0 [ 135.315553] [<ffffffff81460170>] driver_unregister+0x30/0x70 [ 135.321366] [<ffffffffa02e97f4>] exit_st+0x5c/0x868 [st] [ 135.326861] [<ffffffff8111b31a>] SyS_delete_module+0x19a/0x1f0 [ 135.332891] [<ffffffff810e336d>] ? trace_hardirqs_on+0xd/0x10 [ 135.338811] [<ffffffff81141974>] ? __audit_syscall_entry+0x94/0x100 [ 135.345282] [<ffffffff8135b1fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 135.351806] [<ffffffff816e8de9>] system_call_fastpath+0x16/0x1b [ 135.357859] Code: ff eb e3 0f 1f 80 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 66 66 66 66 90 <44> 0f b7 bf 98 00 00 00 8b 05 71 6d 87 00 48 89 fb 49 89 f4 49 [ 135.378282] RIP [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150 [ 135.384355] RSP <ffff8802206e5c98> [ 135.387881] CR2: 0000000000000098 [ 135.391298] ---[ end trace 1968409221ddb3c8 ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] st: fix enlarge_bufferBodo Stroesser1-4/+1
This patch removes a bug in enlarge_buffer() that can make a read or write fail under special conditions. After changing TRY_DIRECT_IO to 0 and ST_MAX_SG to 32 in st_options.h, a program that writes a first block of 128k and than a second bigger block (e.g. 256k) fails. The second write returns errno EOVERFLOW, as enlarge_buffer() checks the sg list and detects that it already is full. As enlarge_buffer uses different page allocation orders depending on the size of the buffer needed, the check does not make sense. Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-21[SCSI] st: convert class code to use dev_groupsGreg Kroah-Hartman1-11/+16
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the scsi tape class code to use the correct field. Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-06[SCSI] st: Take additional queue ref in st_probeJoe Lawrence1-1/+7
This patch fixes a reference count bug in the SCSI tape driver which can be reproduced with the following: * Boot with slub_debug=FZPU, tape drive attached * echo 1 > /sys/devices/... tape device pci path .../remove * Wait for device removal * echo 1 > /sys/kernel/slab/blkdev_queue/validate * Slub debug complains about corrupted poison pattern In commit 523e1d39 (block: make gendisk hold a reference to its queue) add_disk() and disk_release() were modified to get/put an additional reference on a disk queue to fix a reference counting discrepency between bdev release and SCSI device removal. The ST driver never calls add_disk(), so this commit introduced an extra kref put when the ST driver frees its struct gendisk. Attempts were made to fix this bug at the block level [1] but later abandoned due to floppy driver issues [2]. [1] https://lkml.org/lkml/2012/8/27/354 [2] https://lkml.org/lkml/2012/9/22/113 Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-27scsi: convert to idr_alloc()Tejun Heo1-19/+8
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22new helper: file_inode(file)Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-24[SCSI] st: remove st_mutexHannes Reinecke1-6/+2
The st_mutex was created when the BKL was removed, and prevents simultaneous st_open calls. It is better to protect just the necessary data. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Acked-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] st: clean up device file creation and removalJeff Mahoney1-105/+90
This patch cleans up the st device file creation and removal. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] st: get rid of scsi_tapes arrayJeff Mahoney1-110/+68
st currently allocates an array to store pointers to all of the scsi_tape objects. It's used to discover available indexes to use as the base for the minor number selection and later to look up scsi_tape devices for character devices. We switch to using an IDR for minor selection and a pointer from st_modedef back to scsi_tape for the lookups. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] st: clean up dev cleanup in st_probeJeff Mahoney1-7/+4
st_probe leaves a cdev pointer hanging around that is compared during the error path and freed later. There's no need for the pointer to hang around at all. So we free it immediately and simplify the error handling. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] st: Use static class attributesJeff Mahoney1-41/+33
st currently sets up and tears down class attributes manually for every tape drive in the system. This patch uses a statically defined class with class attributes to let the device core do it for us. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-31Merge tag 'scsi-misc' of ↵Linus Torvalds1-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27[SCSI] st: expand ability to write immediate filemarksLee Duncan1-3/+18
The st tape driver recently added the MTWEOFI ioctl, which writes a tape filemark (EOF), like the MTWEOF ioctl, except that MTWEOFI returns immediately. This makes certain applications, like backup software, run much more quickly on buffered tape drives. Since legacy applications do not know about this new MTWEOFI ioctl, this patch adds a new ioctl option that tells the st driver to return immediately when writing an EOF (i.e. a filemark). This new flag is much like the existing flag that tells the st driver to perform writes (and certain other IOs) immediately, but this new flag only applies to writing EOFs. This new feature is controlled via the MTSETDRVBUFFER ioctl, using the newly-defined MT_ST_NOWAIT_EOF flag. Use of this new feature is displayed via the sysfs tape "options" attribute. The st documentation was updated to mention this new flag, as well as the problems that can occur from using it. Signed-off-by: Lee Duncan <lduncan@suse.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] st: implement PMOliver Neukum1-0/+11
This implements basic power management for SCSI tapes. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30[SCSI] st: fix race in st_scsi_execute_endPetr Uzel1-1/+3
The call to complete() in st_scsi_execute_end() wakes up sleeping thread in write_behind_check(), which frees the st_request, thus invalidating the pointer to the associated bio structure, which is then passed to the blk_rq_unmap_user(). Fix by storing pointer to bio structure into temporary local variable. This bug is present since at least linux-2.6.32. CC: stable@kernel.org Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Reported-by: Juergen Groß <juergen.gross@ts.fujitsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2010-12-22[SCSI] st: Increase success probability in driver buffer allocationFUJITA Tomonori1-1/+2
Modify allocation to try the minimum possible page order allowed by the HBA scatter/gather segment limit in allocation of the driver's internal buffer. This increases the probability of successful allocation. The allocation may still fail if this minimum order is > 0. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Reported-by: Lukas Kolbe <lkolbe@techfak.uni-bielefeld.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-22[SCSI] st: Store page order before driver buffer allocationKai Makisara1-2/+2
The order of the pages allocated for the driver buffer must be stored before allocation because it is used in freeing already allocated pages if allocation fails. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Reported-by: Lukas Kolbe <lkolbe@techfak.uni-bielefeld.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-6/+9
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits) [SCSI] be2iscsi: SGE Len == 64K [SCSI] be2iscsi: Remove premature free of cid [SCSI] be2iscsi: More time for FW [SCSI] libsas: fix bug for vacant phy [SCSI] sd: Fix overflow with big physical blocks [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer [SCSI] libsas: Don't issue commands to devices that have been hot-removed [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17 [SCSI] lpfc 8.3.17: Replace function reset methodology [SCSI] lpfc 8.3.17: SCSI fixes [SCSI] lpfc 8.3.17: BSG fixes [SCSI] lpfc 8.3.17: SLI Additions and Fixes [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces [SCSI] ipr: fix array error logging [SCSI] aha152x: enable PCMCIA on 64bit [SCSI] scsi_dh_alua: Handle all states correctly [SCSI] cxgb4i: connection and ddp setting update [SCSI] cxgb3i: fixed connection over vlan ...
2010-10-08[SCSI] st: add MTWEOFI to write filemarks without flushing drive bufferKai Makisara1-6/+9
This patch adds a new MTIOCTOP operation MTWEOFI that writes filemarks with immediate bit set. This means that the drive does not flush its buffer and the next file can be started immediately. This speeds up writing in applications that have to write multiple small files. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-05block: autoconvert trivial BKL users to private mutexArnd Bergmann1-6/+6
The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-05-27st: use noop_llseek() instead of default_llseek()Jan Blunck1-0/+1
st_open() suggests that llseek() doesn't work: "We really want to do nonseekable_open(inode, filp); here, but some versions of tar incorrectly call lseek on tapes and bail out if that fails. So we disallow pread() and pwrite(), but permit lseeks." Instead of using the fallback default_llseek() the driver should use noop_llseek() which leaves the file->f_pos untouched but succeeds. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Cc: Willem Riede <osst@riede.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-26block: Consolidate phys_segment and hw_segment limitsMartin K. Petersen1-2/+1
Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-10[SCSI] st: fix mdata->page_order handlingFUJITA Tomonori1-11/+12
dio transfer always resets mdata->page_order to zero. It breaks high-order pages previously allocated for non-dio transfer. This patches adds reserved_page_order to st_buffer structure to save page order for non-dio transfer. http://bugzilla.kernel.org/show_bug.cgi?id=14563 When enlarge_buffer() allocates 524288 from 0, st uses six-order page allocation. So mdata->page_order is 6 and frp_seg is 2. After that, if st uses dio, sgl_map_user_pages() sets mdata->page_order to 0 for st_do_scsi(). After that, when we call normalize_buffer(), it frees only free frp_seg * PAGE_SIZE (2 * 4096) though we should free frp_seg * PAGE_SIZE << 6 (2 * 4096 << 6). So we see buffer_size is set to 516096 (524288 - 8192). Reported-by: Joachim Breuer <linux-kernel@jmbreuer.net> Tested-by: Joachim Breuer <linux-kernel@jmbreuer.net> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 23:14:44 +0000