summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/hisi_sas
AgeCommit message (Collapse)AuthorFilesLines
2018-11-05scsi: hisi_sas: Remove set but not used variable 'dq_list'YueHaibing3-6/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/hisi_sas/hisi_sas_v1_hw.c: In function 'start_delivery_v1_hw': drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:907:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] drivers/scsi/hisi_sas/hisi_sas_v2_hw.c: In function 'start_delivery_v2_hw': drivers/scsi/hisi_sas/hisi_sas_v2_hw.c:1671:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function 'start_delivery_v3_hw': drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:889:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] It never used since introduction in commit fa222db0b036 ("scsi: hisi_sas: Don't lock DQ for complete task sending") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-19scsi: hisi_sas: Fix NULL pointer dereferenceGustavo A. R. Silva1-4/+4
There is a NULL pointer dereference in case *slot* happens to be NULL at lines 1053 and 1878: struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue]; Notice that *slot* is being NULL checked at lines 1057 and 1881: if (slot), which implies it may be NULL. Fix this by placing the declaration and definition of variable cq, which contains the pointer dereference slot->dlvry_queue, after slot has been properly NULL checked. Addresses-Coverity-ID: 1474515 ("Dereference before null check") Addresses-Coverity-ID: 1474520 ("Dereference before null check") Fixes: 584f53fe5f52 ("scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Fix spin lock management in slot_index_alloc_quirk_v2_hw()John Garry1-1/+3
Currently a spin_unlock_irqrestore() call is missing on the error path, so add it. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Update v3 hw AIP_LIMIT and CFG_AGING_TIME register valuesXiang Chen1-0/+3
Update registers as follows: - Default value of AIP timer is 1ms, and it is easy for some expanders to cause IO error. Change the value to max value 65ms to avoid IO error for those expanders. - A CQ completion will be reported by HW when 4 CQs have occurred or the aging timer expires, whichever happens first. Sor serial IO scenario, it will still wait 8us for every IO before it is reported. So in the situation, the performance is poor. So to improve it, change the limit time to the least value. For other scenario, it does little affect to the performance. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Use block layer tag instead for IPTTXiang Chen5-40/+70
Currently we use the IPTT defined in LLDD to identify IOs. Actually for IOs which are from the block layer, they have tags to identify them. So for those IOs, use tag of the block layer directly, and for IOs which is not from the block layer (such as internal IOs from libsas/LLDD), reserve 96 IPTTs for them. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: unmask interrupts ent72 and ent74Xiang Chen1-1/+1
The interrupts of ent72 and ent74 are not processed by PCIe AER handling, so we need to unmask the interrupts and process them first in the driver. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Free slot later in slot_complete_vx_hw()Xiang Chen2-2/+2
If an SSP/SMP IO times out, it may be actually in reality be simultaneously processing completion of the slot in slot_complete_vx_hw(). Then if the slot is freed in slot_complete_vx_hw() (this IPTT is freed and it may be re-used by other slot), and we may abort the wrong slot in hisi_sas_abort_task(). So to solve the issue, free the slot after the check of SAS_TASK_STATE_ABORTED in slot_complete_vx_hw(). Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Fix the race between IO completion and timeout for ↵Xiang Chen1-9/+46
SMP/internal IO If SMP/internal IO times out, we will possibly free the task immediately. However if the IO actually completes at the same time, the IO completion may refer to task which has been freed. So to solve the issue, flush the tasklet to finish IO completion before free'ing slot/task. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Move evaluation of hisi_hba in hisi_sas_task_prep()Luo Jiaxing1-2/+5
In evaluating hisi_hba, the sas_port may be NULL, so for safety relocate the the check to value possible NULL deference. Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: hisi_sas: Feed back linkrate(max/min) when re-attachedLuo Jiaxing1-0/+3
At directly attached situation, if the user modifies the sysfs interface of maximum_linkrate and minimum_linkrate to renegotiate the linkrate between SAS controller and target, the value of both files mentioned above should have change to user setting after renegotiate is over, but it remains unchanged. To fix this bug, maximum_linkrate and minimum_linkrate will be directly fed back to relevant sas_phy structure. Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-25scsi: libsas: make the lldd_port_deformed method optionalJason Yan1-7/+2
Now LLDDs have to implement lldd_port_deformed method otherwise NULL dereference will happen. Make it optional and remove the dummy implementation in hisi_sas. Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Acked-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: Add SATA FIS check for v3 hwXiang Chen2-2/+11
Add a check ERR bit of status to decide whether there is something wrong with initial register-D2H FIS. If error exist, PHY link reset the channel to restart OOB. Directly call work HISI_PHYE_LINK_RESET replacing disable_phy_vx_hw() and enable_phy_vx_hw(). Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: add memory barrier in task delivery functionXiaofei Tan4-17/+32
In task start delivery function, we need to add a memory barrier to prevent re-ordering of reading memory by hardware. Because the slot data is set in task prepare function and it could be running in another CPU. This patch adds an memory barrier after s->ready is read in the task start delivery function, and uses WRITE_ONCE() in the places where s->ready is set to ensure that the compiler does not re-order. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: Tidy hisi_sas_task_prep()Xiang Chen1-8/+5
To decrease the usage of spinlock during delivery IO, relocate some code in hisi_sas_task_prep(). Also an invalid comment is removed. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: Implement handlers of PCIe FLR for v3 hwXiaofei Tan1-0/+37
This patch implements handlers of PCIe FLR for v3 hw, reset_prepare() and reset_done(). User can issue FLR through sysfs interface, as v3 hw support PCIe FLR. Then if we don't implement these two handlers, our SAS controller will not work after executing FLR. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: relocate some common code for v3 hwXiaofei Tan1-23/+27
Much code of PM suspend function also exists in soft reset function. This is not concise. So, this patch relocates the common code of these two functions to a separate function. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: tidy host controller reset function a bitXiaofei Tan2-22/+42
This patch tidies host controller reset function by putting some code to two new functions, and exports these two functions out, so that they could be used by FLR feature to be realised. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: Fix the failure of recovering PHY from STP link timeoutXiaofei Tan1-10/+16
There is an issue that link reset can't recover PHY when STP link timeout. Because current process of enabling PHY for v3 hw will wait last transmission done. The time of one transmission depends IO size, disk model and so on. Normally, it should be shorter than 50ms. But the last transmission could be never done for some abnormal scenarios, such as STP link timeout. This patch is to fix the issue. Check PHY status after starting process of enabling PHY for 50ms. If the PHY is still active, we disable it forcibly by PHY reset. Of course, we need to clear the PHY reset bit when enable PHY. Besides, the function disable_phy_v3_hw() should not be suitable to call in interrupts for hilink bug for this 50ms delay. Then, we do link reset for hilink bug directly. The change is that we don't clear the invalid dword count register. This is better. Because we should not clear such error count while not saved. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: tidy channel interrupt handler for v3 hwXiaofei Tan1-78/+78
The ISR of channel interrupt of v3 hw is a little long and messy. This patch tidies it by relocating CHL_INT1 and CHL_INT2 handling to new function separately. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19scsi: hisi_sas: Drop hisi_sas_slot_abort()John Garry3-40/+1
For some time now we have not used hisi_sas_slot_abort() to handle erroring slots, apart from in archaic v1 hw. As such, remove this function and associated code. For v1 hw, move error handling to same scheme as other hw revisions, where we allow erroring commands to timeout. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Update a couple of register settings for v3 hwJohn Garry1-2/+1
Update CFG_1US_TIMER_TRSH and CON_CFG_DRIVER settings. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Add missing PHY spinlock initJohn Garry1-0/+2
The init is missed for hisi_sas_phy spinlock, so add it. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Pre-allocate slot DMA buffersXiang Chen2-45/+42
Currently the driver spends much time allocating and freeing the slot DMA buffer for command delivery/completion. To boost the performance, pre-allocate the buffers for all IPTT. The downside of this approach is that we are reallocating all buffer memory upfront, so hog memory which we may not need. However, the current method - DMA buffer pool - also caches all buffers and does not free them until the pool is destroyed, so is not exactly efficient either. On top of this, since the slot DMA buffer is slightly bigger than a 4K page, we need to allocate 2x4K pages per buffer (for 4K page kernel), which is quite wasteful. For 64K page size this is not such an issue. So, for the 4K page case, in order to make memory usage more efficient, pre-allocating larger blocks of DMA memory for the buffers can be more efficient. To make DMA memory usage most efficient, we would choose a single contiguous DMA memory block, but this could use up all the DMA memory in the system (when CMA enabled and no IOMMU), or we may just not be able to allocate a DMA buffer large enough when no CMA or IOMMU. To decide the block size we use the LCM (least common multiple) of the buffer size and the page size. We roundup(64) to ensure the LCM is not too large, even though a little memory may be wasted per block. So, with this, the total memory requirement is about is about 17MB for 4096 max IPTT. Previously (for 4K pages case), it would be 32MB (for all slots allocated). With this change, the relative increase of IOPS for bs=4K read when PAGE_SIZE=4K and PAGE_SIZE=64K is as follows: IODEPTH 4K PAGE_SIZE 64K PAGE_SIZE 32 56% 47% 64 53% 44% 128 64% 43% 256 67% 45% Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Release all remaining resources in clear nexus haXiaofei Tan1-3/+21
In host reset, we use TMF or soft-reset to re-init device, and if success, we will release all LLDD resources of this device. If the init fails - maybe because the device was removed or link has not come up - then do not release the LLDD resources, but rather rely on SCSI EH to handle the timeout for these resources later on. But if clear nexus ha calls host reset, which is the last effort of SCSI EH, we should release all LLDD remain resources. Because SCSI EH will release all tasks after clear nexus ha. Before release, we do I_T nexus reset to try to clear target remain IOs. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Add a flag to filter PHY events during resetXiaofei Tan4-4/+8
During reset, we don't want PHY events reported to libsas for PHYs which were previously attached prior to reset. So check hisi_hba->flags for HISI_SAS_RESET_BIT to filter PHY events during reset. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Adjust task reject period during host resetXiaofei Tan2-10/+15
After soft_reset() for host reset, we should not be allowed to send commands to the HW before the PHYs have come up and the port ids have been refreshed. Prior to this point, any commands cannot be successfully completed. This exclusion is achieved by grabbing the host reset semaphore. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Fix the conflict between dev gone and host resetXiaofei Tan2-0/+7
There is a possible conflict when a device is removed and host reset occurs concurrently. The reason is that then the device is notified as gone, we try to clear the ITCT, which is notified via an interrupt. The dev gone function pends on this event with a completion, which is completed when the ITCT interrupt occurs. But host reset will disable all interrupts, the wait_for_completion() may wait indefinitely. This patch adds an semaphore to synchronise this two processes. The semaphore is taken by the host reset as the basis of synchronising. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Only process broadcast change in phy_bcast_v3_hw()Xiaofei Tan1-1/+7
There are many BROADCAST primitives generated by the host. We are only interested in BROADCAST (CHANGE) primitives currently, so only process this. We have applied this processing for v2 hw before, and it is also needed for v3 hw. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: hisi_sas: Use dmam_alloc_coherent()Xiang Chen1-60/+20
This patch replaces the usage of dma_alloc_coherent() with the managed version, dmam_alloc_coherent(), hereby reducing replicated code. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by; John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Mark PHY as in reset for nexus resetXiang Chen5-5/+69
When issuing a nexus reset for directly attached device, we want to ignore the PHY down events so libsas will not deform and reform the port. In the case that the attached SAS changes for the reset, libsas will deform and form a port. For scenario that the PHY does not come up after a timeout period, then report the PHY down to libsas. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Fix return value when get_free_slot() failedXiaofei Tan1-0/+2
It is an step of executing task to get free slot. If the step fails, we will cleanup LLDD resources and should return failure to upper layer or internal caller to abort task execution of this time. But in the current code, the caller of get_free_slot() doesn't return failure when get_free_slot() failed. This patch is to fix it. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Terminate STP reject quickly for v2 hwXiaofei Tan1-0/+78
For v2 hw, STP link from target is rejected after host reset because of a SoC bug. The STP reject will be terminated after we have sent IO from each PHY of a port. This is not an problem before, as we don't need to setup STP link from target immediately after host reset. But now, it is. Because we want to send soft-reset immediately after host reset. In order to terminate STP reject quickly, this patch send ATA reset command through each PHY of a port. Notes: ATA reset command don't need target's response. Besides, we do abort dev for each device before terminating STP reject. This is a quirk of v2 hw. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Add v2 hw force PHY function for internal ATA commandXiaofei Tan2-0/+13
This patch adds a force PHY function for internal ATA command for v2 hw. Because there is an SoC bug in v2 hw, and need send an IO through each PHY of a port to work around a bug which occurs after a controller reset. This force PHY function will be used in the later patch. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Include TMF elements in struct hisi_sas_slotXiaofei Tan5-31/+30
In future scenarios we will want to use the TMF struct for more task types than SSP. As such, we can add struct hisi_sas_tmf_task directly into struct hisi_sas_slot, and this will mean we can remove the TMF parameters from the task prep functions. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Try wait commands before before controller resetXiaofei Tan4-0/+43
We may reset the controller in many scenarios, such as SCSI EH and HW errors. There should be no IO which returns from target when SCSI EH is active. But for other scenarios, there may be. It is not necessary to make such IOs fail. This patch adds an function of trying to wait for any commands, or IO, to complete before host reset. If no more CQ returned from host controller in 100ms, we assume no more IO can return, and then stop waiting. We wait 5s at most. The HW has a register CQE_SEND_CNT to indicate the total number of CQs that has been reported to driver. We can use this register and it is reliable to resd this register in such scenarios that require host reset. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Init disks after controller resetXiaofei Tan1-1/+18
After the controller is reset, it is possible that the disks attached still have outstanding IO to complete. Thus, when the PHYs come back up after controller reset, it is possible that these IOs complete at some unknown point later. We want to ensure that all IOs are complete after the controller reset so that all associated IPTT and other resources can be recycled safely. To achieve this, re-init the disks by TMF or softreset (in case of ATA devices). If the init fails - maybe because the device was removed or link has not come up - then do not release the device resources, but rather rely on SCSI EH to handle the timeout for these resources later on. This patch also does some cleanup to hisi_sas_init_disk(), including removing superfluous cases in the switch statement. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Create a scsi_host_template per HW moduleXiang Chen5-33/+86
When a SCSI host is registered, the SCSI mid-layer takes a reference to a module in Scsi_host.hostt.module. In doing this, we are prevented from removing the driver module for the host in dangerous scenario, like when a disk is mounted. Currently there is only one scsi_host_template (sht) for all HW versions, and this is the main.c module. So this means that we can possibly remove the HW module in this dangerous scenario, as SCSI mid-layer is only referencing the main.c module. To fix this, create a sht per module, referencing that same module to create the Scsi host. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Reset disks when discoveredXiang Chen1-1/+49
When a disk is discovered, it may be in an error state, or there may be residual commands remaining in the disk. To ensure any disk is in good state after discovery, reset via TMF (for SAS disk) or softreset (for a SATA disk). Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Add LED feature for v3 hwXiaofei Tan1-0/+42
This patch implements LED feature of directly attached disk for v3 hw. In fact, this hw has created an SGPIO component for LED feature, and we can control LEDs just by internal registers. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Change common allocation mode of device idXiang Chen2-1/+6
To reduce possibility of hitting unknown SoC bugs and aid debugging and test, change allocation mode of device id from last used device id instead of lowest available index. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: change slot index allocation modeXiang Chen2-3/+11
Currently we find the lowest available empty bit in the IPTT bitmap to allocate the IPTT for a command. To reduce possibility of hitting unknown SoC bugs and also aid in the debugging of those same bugs, change the allocation mode. The next allocation method is to use the next free slot adjacent to the most recently allocated slot, in a round-robin fashion. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()John Garry4-70/+36
There is much common code and functionality between the HW versions to set the PHY linkrate. As such, this patch factors out the common code into a generic function hisi_sas_phy_set_linkrate(). Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: hisi_sas: fix a typo in hisi_sas_task_prep()Wei Yongjun1-1/+1
Fix a typo in hisi_sas_task_prep(). Fixes: 7eee4b921822 ("scsi: hisi_sas: relocate smp sg map") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: hisi_sas: add check of device in hisi_sas_task_exec()Xiaofei Tan1-10/+13
Currently we don't check that device is not gone before dereferencing its elements in the function hisi_sas_task_exec() (specifically, the DQ pointer). This patch fixes this issue by filling in the DQ pointer in hisi_sas_task_prep() after we check that the device pointer is still safe to reference. [mkp: typo] Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: hisi_sas: Use device lock to protect slot alloc/freeXiang Chen2-43/+16
The IPTT of a slot is unique, and we currently use hisi_hba lock to protect it. Now slot is managed on hisi_sas_device.list, so use DQ lock to protect for allocating and freeing the slot. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: hisi_sas: Don't lock DQ for complete task sendingXiang Chen5-41/+96
Currently we lock the DQ to protect whole delivery process. So this stops us building slots for the same queue in parallel, and can affect performance. To optimise it, only lock the DQ during special periods, specifically when allocating a slot from the DQ and when delivering a slot to the HW. This approach is now safe, thanks to the previous patches to ensure that we always deliver a slot to the HW once allocated. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: hisi_sas: allocate slot buffer earlierXiang Chen1-24/+31
Currently we allocate the slot's memory buffer after allocating the DQ slot. To aid DQ lockout reduction, and allow slots to be built in parallel, move this step (which can fail) prior to allocating the slot. Also a stray spin_unlock_irqrestore() is removed from internal task exec function. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: hisi_sas: make return type of prep functions voidXiang Chen5-118/+51
Since the task prep functions now should not fail, adjust the return types to void. In addition, some checks in the task prep functions are relocated to the main module; this is specifically the check for the number of elements in an sg list exceeded the HW SGE limit. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: hisi_sas: relocate smp sg mapXiang Chen4-106/+51
Currently we use DQ lock to protect delivery of DQ entry one by one. To optimise to allow more than one slot to be built for a single DQ in parallel, we need to remove the DQ lock when preparing slots, prior to delivery. To achieve this, we rearrange the slot build order to ensure that once we allocate a slot for a task, we do cannot fail to deliver the task. In this patch, we rearrange the slot building for SMP tasks to ensure that sg mapping part (which can fail) happens before we allocate the slot in the DQ. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: hisi_sas: workaround a v3 hw hilink bugXiaofei Tan1-1/+24
There is an SoC bug of v3 hw development version. When hot- unplugging a directly attached disk, the PHY down interrupt may not happen. It is very easy to appear on some boards. When this issue occurs, the controller will receive many invalid dword frames, and the "alos" fields of register HILINK_ERR_DFX can indicate that disk was unplugged. As an workaround solution, this patch detects this issue in the channel interrupt, and workaround it by following steps: - Disable the PHY - Clear error code and interrupt - Enable the PHY Then the HW will reissue PHY down interrupt. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 07:21:15 +0000