summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2013-02-28qdio: remove unused parametersStefan Raspl3-7/+7
Remove unused function parameters. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28s390/dasd: fix unresponsive device after all channel paths were lostStefan Haberland1-2/+8
Failfast bit was set incorrectly. Use set_bit to enable failfast. Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds4-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "All trivial, thanks to the stuff which didn't quite make it time" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_console: Initialize guest_connected=true for rproc_serial virtio: use module_virtio_driver. virtio: Add module driver macro for virtio drivers. virtio_console: Use virtio device index to generate port name virtio: make pci_device_id const virtio: make config_ops const virtio-mmio: fix wrong comment about register offset virtio_console: Let unconnected rproc device receive data.
2013-02-24Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-9/+957
Pull KVM updates from Marcelo Tosatti: "KVM updates for the 3.9 merge window, including x86 real mode emulation fixes, stronger memory slot interface restrictions, mmu_lock spinlock hold time reduction, improved handling of large page faults on shadow, initial APICv HW acceleration support, s390 channel IO based virtio, amongst others" * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) Revert "KVM: MMU: lazily drop large spte" x86: pvclock kvm: align allocation size to page size KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr x86 emulator: fix parity calculation for AAD instruction KVM: PPC: BookE: Handle alignment interrupts booke: Added DBCR4 SPR number KVM: PPC: booke: Allow multiple exception types KVM: PPC: booke: use vcpu reference from thread_struct KVM: Remove user_alloc from struct kvm_memory_slot KVM: VMX: disable apicv by default KVM: s390: Fix handling of iscs. KVM: MMU: cleanup __direct_map KVM: MMU: remove pt_access in mmu_set_spte KVM: MMU: cleanup mapping-level KVM: MMU: lazily drop large spte KVM: VMX: cleanup vmx_set_cr0(). KVM: VMX: add missing exit names to VMX_EXIT_REASONS array KVM: VMX: disable SMEP feature when guest is in non-paging mode KVM: Remove duplicate text in api.txt Revert "KVM: MMU: split kvm_mmu_free_page" ...
2013-02-22new helper: file_inode(file)Al Viro4-9/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds29-540/+741
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "The most prominent change in this patch set is the software dirty bit patch for s390. It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and the page_test_and_clear_dirty primitive which makes the common memory management code a bit less obscure. Heiko fixed most of the PCI related fallout, more often than not missing GENERIC_HARDIRQS dependencies. Notable is one of the 3270 patches which adds an export to tty_io to be able to resize a tty. The rest is the usual bunch of cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits) s390/module: Add missing R_390_NONE relocation type drivers/gpio: add missing GENERIC_HARDIRQ dependency drivers/input: add couple of missing GENERIC_HARDIRQS dependencies s390/cleanup: rename SPP to LPP s390/mm: implement software dirty bits s390/mm: Fix crst upgrade of mmap with MAP_FIXED s390/linker skript: discard exit.data at runtime drivers/media: add missing GENERIC_HARDIRQS dependency s390/bpf,jit: add vlan tag support drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency iucv: fix kernel panic at reboot s390/Kconfig: sort list of arch selected config options phylib: remove !S390 dependeny from Kconfig uio: remove !S390 dependency from Kconfig dasd: fix sysfs cleanup in dasd_generic_remove s390/pci: fix hotplug module init s390/pci: cleanup clp page allocation s390/pci: cleanup clp inline assembly s390/perf: cpum_cf: fallback to software sampling events s390/mm: provide PAGE_SHARED define ...
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds6-39/+27
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-14s390/mm: implement software dirty bitsMartin Schwidefsky1-8/+2
The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14dasd: fix sysfs cleanup in dasd_generic_removeStefan Weinhuber1-1/+4
When the DASD devices are detached from the driver, then the dasd_generic_remove function is called. One of the things this function should do is to remove the DASD specific sysfs attributes, but this is not done in all cases. This is likely to cause an oops when at a later point sysfs stumbles over the stale pointers. In particular this happens when when the modules are unloaded and loaded again. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/time: rename tod clock access functionsHeiko Carstens18-58/+58
Fix name clash with some common code device drivers and add "tod" to all tod clock access function names. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/scm: use inline dummy functionsSebastian Ott2-14/+29
Convert the defines for the !CONFIG_SCM* stuff to static inline functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: handle unknown pgroup stateSebastian Ott1-3/+61
When an attempt to query or modify the grouping state of a channel path fails due to a timeout, we cannot be sure about its state. To get back to a defined state, disband the whole path group and try again while excluding the offending path. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: export vpm via sysfsSebastian Ott1-0/+10
Add new attribute "vpm" to the subchannel sysfs directory of I/O subchannels. This attribute contains a path mask indicating which channel paths were successfully verified to be usable for I/O. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: skip broken pathsSebastian Ott1-5/+6
Omit known to be broken paths (those set in path_noirq_mask) for the sense/set PGID and nop IO commands. Note: path_noirq_mask will be reset in ccw_device_verify_start (the paths could be healthy again). However if we restart a path verification via verify_start this mask will not be reset (there is no need to let the wait for an interrupt time out again - plus we do not want to loop once we deal with the paths in unknown path group state). Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: dont abort verification after missing irqSebastian Ott2-10/+43
Do not abort path verification when waiting for an interrupt timed out. Use path_noirq_mask to keep track of the paths used for this (also maintain a path_notoper_mask for debugging purposes). If the timeout happend to be during an operation where we query or alter the state of path groups set the pgid_unknown flag. With this change we allow usage of devices which have such ill-behaved paths (if at least one path is operational). Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/zcore: Add hsa fileMichael Holzheu1-3/+59
Under LPAR the zfcpdump HSA is a shared resource. Up to now the HSA memory is released when the zcore file is closed. Dump programs that know that they do not need the HSA memory any more (e.g. because they already dumped it) could release it earlier. This would allow other LPARs to use it again. To achieve this a new debugfs file "hsa" is added that can be used to read the HSA size and to release the HSA by writing "0" into the file. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/chsc: cleanup SEI helper functionsSebastian Ott1-36/+32
Cleanup the functions used to call SEI. Also provide !CONFIG_PCI dummys for pci error handling. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/3270: asynchronous size sensingMartin Schwidefsky3-314/+331
Convert the synchronous size sense code to an interrupt driven approach. This allows to set the device online even if the terminal is not connected. With the new code views can be registered without a connected terminal, the tty can be opened as soon as the device is online. After the terminal has been connected and the size has been determined the tty is resized to match the device characteristics.. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/3270: introduce device notifierMartin Schwidefsky4-82/+83
Add a notifier to create / destroy the device nodes for the tty view and the fullscreen view. Only device nodes for online devices are created and the device names will follow the convention as outlined in Documentation/devices.txt: 3270/tty<x> for the tty nodes, 3270/tub<x> for hte fullscreen nodes and 3270/tub for the fullscreen control node. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/3270: fix initialization order in tty3270_alloc_viewMartin Schwidefsky1-6/+8
Corrects the order of tasklet_init vs. the allocation of the read request which has been broken by git commit 9d2ae233 "TTY: tty3270, move initialization to allocation". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/3270: readd tty3270_openMartin Schwidefsky1-0/+15
Reintroduce the tty3270_open function which has been removed by git commit 20cda6f2 "TTY: tty3270, add tty install". Without the open function in the tty_operations tty_open will return -ENODEV and the 3270 tty will not work. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-11virtio: make config_ops constStephen Hemminger1-1/+1
It is just a table of function pointers, make it const for cleanliness and security reasons. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-30s390/virtio-ccw: Fix setup_vq error handling.Cornelia Huck1-9/+11
virtio_ccw_setup_vq() failed to unwind correctly on errors. In particular, it failed to delete the virtqueue on errors, leading to list corruption when virtio_ccw_del_vqs() iterated over a virtqueue that had not been added to the vcdev's list. Fix this with redoing the error unwinding in virtio_ccw_setup_vq(), using a single path for all errors. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-19/+12
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-25Merge 3.8-rc5 into tty-nextGreg Kroah-Hartman21-52/+48
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21qeth: Fix HiperSockets performance regressionStefan Raspl1-1/+1
Commit 46d3ceab "tcp: TCP Small Queues" has severly degraded performance for single connection RR workloads on HiperSockets with MTU >=16K due to a conflict of the TCP Small Queues approach with our buffer scan threshold which releases buffers not frequently enough yet. This fix restores performance to the same level as before cited commit. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21qeth: Make s390dbf card entries persistentStefan Raspl1-12/+78
As of now, s390dbf entries for the cards are discarded as soon as the device is removed. However, this will also bar us of all chances of getting valuable debug information after a device has been removed. This patch will keep the s390dbf entries around until the qeth module is removed. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21qeth: Update Kconfig wordingStefan Raspl1-2/+2
Refer to virtual NICs instead of GuestLANs. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21qeth: Support VEPA modeStefan Raspl7-67/+112
The existing port isolation mode 'forward' will now verify that the adjacent switch port supports the required reflective relay (RR) mode. This patch adds the required error handling for the cases where enabling port isolation mode 'forward' can now fail. Furthermore, once established, we never fall back from one of the port isolation modes to a non-isolated mode without further user-interaction. This includes cases where the isolation mode was enabled successfully, but ceases to work e.g. due to configuration changes at the switch port. Finally, configuring an isolation mode with the device being offline will make onlining the device fail permanently upon errors encountered until either errors are resolved or the isolation mode is changed by the user to a different mode. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21qeth: Remove unused exportsStefan Raspl2-7/+2
Remove exports that are not used anywhere else. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21qeth: Fix retry logic in hardsetupStefan Raspl1-3/+3
The previous code did never retry any idx setup unless retries were done for device offline/online at the beginning of the function. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-4/+4
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16s390/chsc: fix SEI usageSebastian Ott1-19/+12
cbc0dd1 "s390/pci: CHSC PCI support for error and availability events" introduced a new SEI notification type as part of pci support. The way SEI was called with nt2 and nt0 consecutive broke the nt0 stuff used for channel subsystem notifications. The reason why this was broken with the mentioned patch is that you cannot selectively disable type 0 notifications (so even when asked for type 2 only, type 0 could be presented). The way to do it is to tell SEI which types of notification you can process and -this is the important part- look at the SEI result which notification type you actually received. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-15TTY: switch tty_schedule_flipJiri Slaby1-10/+2
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. This is the last one: tty_schedule_flip Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby3-11/+5
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: move low_latency to tty_portJiri Slaby4-5/+5
One point is to have less places where we actually need tty pointer. The other is that low_latency is bound to buffer processing and buffers are now in tty_port. So it makes sense to move low_latency to tty_port too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_stringJiri Slaby3-4/+5
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_charJiri Slaby3-5/+6
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller20-33/+36
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09KVM: s390: Gracefully handle busy conditions on ccw_device_startChristian Borntraeger1-5/+8
In rare cases a virtio command might try to issue a ccw before a former ccw was answered with a tsch. This will cause CC=2 (busy). Lets just retry in that case. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: s390: Dynamic allocation of virtio-ccw I/O data.Cornelia Huck1-106/+174
Dynamically allocate any data structures like ccw used when doing channel I/O. Otherwise, we'd need to add extra serialization for the different callbacks using the same data structures. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08s390/3215: partially revert tty close handling fixHeiko Carstens1-1/+5
Partially revert ae289dc1f "s390/3215: fix tty close handling", since this leads sometimes to hanging agetty processes and therefore systems that get stuck while starting. This was magically fixed (bisected) by a common code patch from Alan Cox: 36b3c070 "tty: Move the handling of the tty release logic", however it was unrelated. Since the removed code worked for a decade, nobody knows anymore why it was in there in the first place and debugging the observed hang is non-trivial (at least for me :) ), let's just re-add the removed code before we see other side effects. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-01-08s390/irq: remove split irq fields from /proc/statHeiko Carstens20-31/+30
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: enable irq sum accounting for /proc/stat againHeiko Carstens1-1/+1
For more than two years, since f2c66cd8eeddedb440f33bc0f5cec1ed7ae376cb "/proc/stat: scalability of irq num per cpu" the output of /proc/stat is broken. The first field in the "intr" line should contain the sum of all interrupts, however since the above mentioned change it is always zero. The reason for that is that a per cpu irq sum variable had been introduced which got incremented when calling kstat_incr_irqs_this_cpu(). However on s390 we directly incremented only the per cpu per irq counter by accessing the array element via kstat_cpu(smp_processor_id()).irqs[...]. So fix this and use the kstat_incr_irqs_this_cpu() wrapper which increments both: the per cpu per irq counter and the per cpu irq sum counter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko1-11/+8
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04qeth: ensure that __vlan_find_dev_deep() is called with rcu_read_lockJiri Pirko1-10/+11
Also benefit from rcu_read_lock held and use __in_dev_get_rcu() in ipv4 case. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-18KVM: s390: Add a channel I/O based virtio transport driver.Cornelia Huck2-1/+854
Add a driver for kvm guests that matches virtual ccw devices provided by the host as virtio bridge devices. These virtio-ccw devices use a special set of channel commands in order to perform virtio functions. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-12-18KVM: s390: Handle hosts not supporting s390-virtio.Cornelia Huck1-8/+30
Running under a kvm host does not necessarily imply the presence of a page mapped above the main memory with the virtio information; however, the code includes a hard coded access to that page. Instead, check for the presence of the page and exit gracefully before we hit an addressing exception if it does not exist. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> cc: stable@vger.kernel.org Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds19-255/+443
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 21:10:23 +0000