summaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-20tty: convert tty_ldisc_ops 'read()' function to take a kernel pointerLinus Torvalds2-2/+4
The tty line discipline .read() function was passed the final user pointer destination as an argument, which doesn't match the 'write()' function, and makes it very inconvenient to do a splice method for ttys. This is a conversion to use a kernel buffer instead. NOTE! It does this by passing the tty line discipline ->read() function an additional "cookie" to fill in, and an offset into the cookie data. The line discipline can fill in the cookie data with its own private information, and then the reader will repeat the read until either the cookie is cleared or it runs out of data. The only real user of this is N_HDLC, which can use this to handle big packets, even if the kernel buffer is smaller than the whole packet. Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-14/+11
Alexei Starovoitov says: ==================== pull-request: bpf 2020-12-10 The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 12 day(s) which contain a total of 21 files changed, 163 insertions(+), 88 deletions(-). The main changes are: 1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei. 2) Fix ring_buffer__poll() return value, from Andrii. 3) Fix race in lwt_bpf, from Cong. 4) Fix test_offload, from Toke. 5) Various xsk fixes. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09Merge branch '1GbE' of ↵David S. Miller5-34/+90
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-09 This series contains updates to igb, ixgbe, i40e, and ice drivers. Sven Auhagen fixes issues with igb XDP: return correct error value in XDP xmit back, increase header padding to include space for double VLAN, add an extack error when Rx buffer is too small for frame size, set metasize if it is set in xdp, change xdp_do_flush_map to xdp_do_flush, and update trans_start to avoid possible Tx timeout. Björn fixes an issue where an Rx buffer can be reused prematurely with XDP redirect for ixgbe, i40e, and ice drivers. The following are changes since commit 323a391a220c4a234cb1e678689d7f4c3b73f863: can: isotp: isotp_setsockopt(): block setsockopt on bound sockets and are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 1GbE ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net/mlx4_en: Handle TX error CQEMoshe Shemesh3-7/+39
In case error CQE was found while polling TX CQ, the QP is in error state and all posted WQEs will generate error CQEs without any data transmitted. Fix it by reopening the channels, via same method used for TX timeout handling. In addition add some more info on error CQE and WQE for debug. Fixes: bd2f631d7c60 ("net/mlx4_en: Notify user when TX ring in error state") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net/mlx4_en: Avoid scheduling restart task if it is already runningMoshe Shemesh2-8/+19
Add restarting state flag to avoid scheduling another restart task while such task is already running. Change task name from watchdog_task to restart_task to better fit the task role. Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09e1000e: fix S0ix flow to allow S0i3.2 subset entryVitaly Lifshits1-4/+4
Changed a configuration in the flows to align with architecture requirements to achieve S0i3.2 substate. This helps both i219V and i219LM configurations. Also fixed a typo in the previous commit 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case"). Fixes: 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case"). Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20201208185632.151052-1-mario.limonciello@dell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ice: avoid premature Rx buffer reuseBjörn Töpel1-9/+22
The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reported-and-analyzed-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ixgbe: avoid premature Rx buffer reuseBjörn Töpel1-7/+17
The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect") Reported-and-analyzed-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09i40e: avoid premature Rx buffer reuseBjörn Töpel1-7/+20
The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Longer explanation: Intel NICs have a recycle mechanism. The main idea is that a page is split into two parts. One part is owned by the driver, one part might be owned by someone else, such as the stack. t0: Page is allocated, and put on the Rx ring +--------------- used by NIC ->| upper buffer (rx_buffer) +--------------- | lower buffer +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX t1: Buffer is received, and passed to the stack (e.g.) +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 1 t2: Buffer is received, and redirected +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- Now, prior calling xdp_do_redirect(): page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 2 This means that buffer *cannot* be flipped/reused, because the skb is still using it. The problem arises when xdp_do_redirect() actually frees the segment. Then we get: page count == USHRT_MAX - 1 rx_buffer->pagecnt_bias == USHRT_MAX - 2 From a recycle perspective, the buffer can be flipped and reused, which means that the skb data area is passed to the Rx HW ring! To work around this, the page count is stored prior calling xdp_do_redirect(). Note that this is not optimal, since the NIC could actually reuse the "lower buffer" again. However, then we need to track whether XDP_REDIRECT consumed the buffer or not. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Reported-and-analyzed-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: avoid transmit queue timeout in xdp pathSven Auhagen1-0/+5
Since we share the transmit queue with the network stack, it is possible that we run into a transmit queue timeout. This will reset the queue. This happens under high load when XDP is using the transmit queue pretty much exclusively. netdev_start_xmit() sets the trans_start variable of the transmit queue to jiffies which is later utilized by dev_watchdog(), so to avoid timeout, let stack know that XDP xmit happened by bumping the trans_start within XDP Tx routines to jiffies. Fixes: 9cbc948b5a20 ("igb: add XDP support") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: use xdp_do_flushSven Auhagen1-1/+1
Since it is a new XDP implementation change xdp_do_flush_map to xdp_do_flush. Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: skb add metasize for xdpSven Auhagen1-0/+4
add metasize if it is set in xdp Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: XDP extack message on errorSven Auhagen1-5/+12
Add an extack error message when the RX buffer size is too small for the frame size. Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: take VLAN double header into accountSven Auhagen2-4/+8
Increase the packet header padding to include double VLAN tagging. This patch uses a macro for this. Fixes: 9cbc948b5a20 ("igb: add XDP support") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09igb: XDP xmit back fix error codeSven Auhagen1-1/+1
The igb XDP xmit back function should only return defined error codes. Fixes: 9cbc948b5a20 ("igb: add XDP support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09Revert "geneve: pull IP header before ECN decapsulation"Jakub Kicinski1-16/+4
This reverts commit 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation"). Eric says: "network header should have been pulled already before hitting geneve_rx()". Let's revert the syzbot fix since it's causing more harm than good, and revisit. Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation") Link: https://bugzilla.kernel.org/show_bug.cgi?id=210569 Link: https://lore.kernel.org/netdev/CANn89iJVWfb=2i7oU1=D55rOyQnBbbikf+Mc6XHMkY7YX-yGEw@mail.gmail.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09netdevsim: Add debugfs toggle to reject BPF programs in verifierToke Høiland-Jørgensen2-2/+11
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be used to make netdevsim reject BPF programs from being accepted by the verifier. If this toggle (which defaults to true) is set to false, nsim_bpf_verify_insn() will return EOPNOTSUPP on the last instruction (after outputting the 'Hello from netdevsim' verifier message). This makes it possible to check the verification callback in the driver from test_offload.py in selftests, since the verifier now clears the verifier log on a successful load, hiding the message from the driver. Fixes: 6f8a57ccf851 ("bpf: Make verifier log more relevant by default") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
2020-12-09xdp: Remove the xdp_attachment_flags_ok() callbackToke Høiland-Jørgensen3-12/+0
Since commit 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device"), the XDP program attachment info is now maintained in the core code. This interacts badly with the xdp_attachment_flags_ok() check that prevents unloading an XDP program with different load flags than it was loaded with. In practice, two kinds of failures are seen: - An XDP program loaded without specifying a mode (and which then ends up in driver mode) cannot be unloaded if the program mode is specified on unload. - The dev_xdp_uninstall() hook always calls the driver callback with the mode set to the type of the program but an empty flags argument, which means the flags_ok() check prevents the program from being removed, leading to bpf prog reference leaks. The original reason this check was added was to avoid ambiguity when multiple programs were loaded. With the way the checks are done in the core now, this is quite simple to enforce in the core code, so let's add a check there and get rid of the xdp_attachment_flags_ok() callback entirely. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
2020-12-08net: ll_temac: Fix potential NULL dereference in temac_probe()Zhang Changzhong1-6/+3
platform_get_resource() may fail and in this case a NULL dereference will occur. Fix it to use devm_platform_ioremap_resource() instead of calling platform_get_resource() and devm_ioremap(). This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08net: stmmac: overwrite the dma_cap.addr64 according to HW designFugang Duan2-8/+9
The current IP register MAC_HW_Feature1[ADDR64] only defines 32/40/64 bit width, but some SOCs support others like i.MX8MP support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64]. So overwrite dma_cap.addr64 according to HW real design. Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08net: stmmac: delete the eee_ctrl_timer after napi disabledFugang Duan1-3/+10
There have chance to re-enable the eee_ctrl_timer and fire the timer in napi callback after delete the timer in .stmmac_release(), which introduces to access eee registers in the timer function after clocks are disabled then causes system hang. Found this issue when do suspend/resume and reboot stress test. It is safe to delete the timer after napi disabled and disable lpi mode. Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08net: stmmac: free tx skb buffer in stmmac_resume()Fugang Duan1-0/+14
When do suspend/resume test, there have WARN_ON() log dump from stmmac_xmit() funciton, the code logic: entry = tx_q->cur_tx; first_entry = entry; WARN_ON(tx_q->tx_skbuff[first_entry]); In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because the skb should be handled and freed in stmmac_tx_clean(). But stmmac_resume() reset queue parameters like below, skb buffers may not be freed. tx_q->cur_tx = 0; tx_q->dirty_tx = 0; So free tx skb buffer in stmmac_resume() to avoid warning and memory leak. log: [ 46.139824] ------------[ cut here ]------------ [ 46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0 [ 46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev [ 46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.24-2.1.0+g2ad925d15481 #1 [ 46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 46.180465] pc : stmmac_xmit+0x7a0/0x9d0 [ 46.184387] lr : dev_hard_start_xmit+0x94/0x158 [ 46.188913] sp : ffff800010003cc0 [ 46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100 [ 46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090 [ 46.202842] x25: 0000000000000000 x24: 0000000000000000 [ 46.208151] x23: 0000000000000003 x22: ffff8000119ddd30 [ 46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0 [ 46.218769] x19: 0000000000000003 x18: 0000000000000000 [ 46.224078] x17: 0000000000000000 x16: 0000000000000000 [ 46.229386] x15: 0000000000000079 x14: 0000000000000000 [ 46.234695] x13: 0000000000000003 x12: 0000000000000003 [ 46.240003] x11: 0000000000000010 x10: 0000000000000010 [ 46.245312] x9 : ffff00017002b140 x8 : 0000000000000000 [ 46.250621] x7 : ffff00017636f000 x6 : 0000000000000010 [ 46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000 [ 46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff [ 46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000 [ 46.271856] Call trace: [ 46.274302] stmmac_xmit+0x7a0/0x9d0 [ 46.277874] dev_hard_start_xmit+0x94/0x158 [ 46.282056] sch_direct_xmit+0x11c/0x338 [ 46.285976] __qdisc_run+0x118/0x5f0 [ 46.289549] net_tx_action+0x110/0x198 [ 46.293297] __do_softirq+0x120/0x23c [ 46.296958] irq_exit+0xb8/0xd8 [ 46.300098] __handle_domain_irq+0x64/0xb8 [ 46.304191] gic_handle_irq+0x5c/0x148 [ 46.307936] el1_irq+0xb8/0x180 [ 46.311076] cpuidle_enter_state+0x84/0x360 [ 46.315256] cpuidle_enter+0x34/0x48 [ 46.318829] call_cpuidle+0x18/0x38 [ 46.322314] do_idle+0x1e0/0x280 [ 46.325539] cpu_startup_entry+0x24/0x40 [ 46.329460] rest_init+0xd4/0xe0 [ 46.332687] arch_call_rest_init+0xc/0x14 [ 46.336695] start_kernel+0x420/0x44c [ 46.340353] ---[ end trace bc1ee695123cbacd ]--- Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08net: stmmac: start phylink instance before stmmac_hw_setup()Fugang Duan1-8/+8
Start phylink instance and resume back the PHY to supply RX clock to MAC before MAC layer initialization by calling .stmmac_hw_setup(), since DMA reset depends on the RX clock, otherwise DMA reset cost maximum timeout value then finally timeout. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08net: stmmac: increase the timeout for dma resetFugang Duan1-1/+1
Current timeout value is not enough for gmac5 dma reset on imx8mp platform, increase the timeout range. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08bonding: fix feature flag setting at init timeJarod Wilson1-7/+15
Don't try to adjust XFRM support flags if the bond device isn't yet registered. Bad things can currently happen when netdev_change_features() is called without having wanted_features fully filled in yet. This code runs both on post-module-load mode changes, as well as at module init time, and when run at module init time, it is before register_netdevice() has been called and filled in wanted_features. The empty wanted_features led to features also getting emptied out, which was definitely not the intended behavior, so prevent that from happening. Originally, I'd hoped to stop adjusting wanted_features at all in the bonding driver, as it's documented as being something only the network core should touch, but we actually do need to do this to properly update both the features and wanted_features fields when changing the bond type, or we get to a situation where ethtool sees: esp-hw-offload: off [requested on] I do think we should be using netdev_update_features instead of netdev_change_features here though, so we only send notifiers when the features actually changed. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Reported-by: Ivan Vecera <ivecera@redhat.com> Suggested-by: Ivan Vecera <ivecera@redhat.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel muxMartin Blumenstingl1-3/+3
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in struct clk_mux expects the mask relative to the "shift" field in the same struct. While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use __ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK macro. Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07dpaa2-mac: Add a missing of_node_put after of_device_is_availableChristophe JAILLET1-0/+1
Add an 'of_node_put()' call when a tested device node is not available. Fixes: 94ae899b2096 ("dpaa2-mac: add PCS support through the Lynx module") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201206151339.44306-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-07enetc: Fix reporting of h/w packet countersClaudiu Manoil2-6/+14
Noticed some inconsistencies in packet statistics reporting. This patch adds the missing Tx packet counter registers to ethtool reporting and fixes the information strings for a few of them. Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201204171505.21389-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-06net: hns3: remove a misused pragma packedHuazhong Tan1-4/+0
hclge_dbg_reg_info[] is defined as an array of packed structure accidentally. However, this array contains pointers, which are no longer aligned naturally, and cannot be relocated on PPC64. Hence, when compile-testing this driver on PPC64 with CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), there will be some warnings. Since each field in structure hclge_qos_pri_map_cmd and hclge_dbg_bitmap_cmd is type u8, the pragma packed is unnecessary for these two structures as well, so remove the pragma packed in hclge_debugfs.h to fix this issue, and this increases hclge_dbg_reg_info[] by 4 bytes per entry. Fixes: a582b78dfc33 ("net: hns3: code optimization for debugfs related to "dump reg"") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05net: mscc: ocelot: fix dropping of unknown IPv4 multicast on SevilleVladimir Oltean5-11/+8
The current assumption is that the felix DSA driver has flooding knobs per traffic class, while ocelot switchdev has a single flooding knob. This was correct for felix VSC9959 and ocelot VSC7514, but with the introduction of seville VSC9953, we see a switch driven by felix.c which has a single flooding knob. So it is clear that we must do what should have been done from the beginning, which is not to overwrite the configuration done by ocelot.c in felix, but instead to teach the common ocelot library about the differences in our switches, and set up the flooding PGIDs centrally. The effect that the bogus iteration through FELIX_NUM_TC has upon seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will actually overwrite ANA_FLOODING_IPMC when attempting to write ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING. And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D: MC6_DATA = 61, MC6_CTRL = 61, MC4_DATA = 60, MC4_CTRL = 0. Because MC4_CTRL is zero, this means that IPv4 multicast control packets are not flooded, but dropped. An invalid configuration, and this is how the issue was actually spotted. Reported-by: Eldar Gasanov <eldargasanov2@gmail.com> Reported-by: Maxim Kochetkov <fido_max@inbox.ru> Tested-by: Eldar Gasanov <eldargasanov2@gmail.com> Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 3c7b51bd39b2 ("net: dsa: felix: allow flooding for all traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05net: marvell: prestera: Fix error return code in prestera_port_create()Zhang Changzhong1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1607071782-34006-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05vrf: packets with lladdr src needs dst at input with orig_iif when needs strictStephen Suryaputra1-2/+8
Depending on the order of the routes to fe80::/64 are installed on the VRF table, the NS for the source link-local address of the originator might be sent to the wrong interface. This patch ensures that packets with link-local addr source is doing a lookup with the orig_iif when the destination addr indicates that it is strict. Add the reproducer as a use case in self test script fcnal-test.sh. Fixes: b4869aa2f881 ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05can: softing: softing_netdev_open(): fix error handlingZhang Qilong1-2/+7
If softing_netdev_open() fails, we should call close_candev() to avoid reference leak. Fixes: 03fd3cf5a179d ("can: add driver for Softing card") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/r/20201202151632.1343786-1-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-2-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05ch_ktls: fix build warning for ipv4-only configArnd Bergmann1-5/+1
When CONFIG_IPV6 is disabled, clang complains that a variable is uninitialized for non-IPv4 data: drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1046:6: error: variable 'cntrl1' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (tx_info->ip_family == AF_INET) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1059:2: note: uninitialized use occurs here cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) | ^~~~~~ Replace the preprocessor conditional with the corresponding C version, and make the ipv4 case unconditional in this configuration to improve readability and avoid the warning. Fixes: 86716b51d14f ("ch_ktls: Update cheksum information") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201203222641.964234-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04ethernet: select CONFIG_CRC32 as neededArnd Bergmann10-0/+10
A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Acked-by: Mark Einon <mark.einon@gmail.com> Acked-by: Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net: ipa: pass the correct size when freeing DMA memoryAlex Elder1-1/+6
When the coherent memory is freed in gsi_trans_pool_exit_dma(), we are mistakenly passing the size of a single element in the pool rather than the actual allocated size. Fix this bug. Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201203215106.17450-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steeringYevgeny Kliteynik3-0/+7
STEs format for Connect-X5 and Connect-X6DX different. Currently, on Connext-X6DX the SW steering would break at some point when building STEs w/o giving a proper error message. Fix this by checking the STE format of the current device when initializing domain: add mlx5_ifc definitions for Connect-X6DX SW steering, read FW capability to get the current format version, and check this version when domain is being created. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net/mlx5e: kTLS, Enforce HW TX csum offload with kTLSTariq Toukan1-7/+15
Checksum calculation cannot be done in SW for TX kTLS HW offloaded packets. Offload it to the device, disregard the declared state of the TX csum offload feature. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net: mlx5e: fix fs_tcp.c build when IPV6 is not enabledRandy Dunlap1-0/+2
Fix build when CONFIG_IPV6 is not enabled by making a function be built conditionally. Fixes these build errors and warnings: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow': ../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'? 380 | #define sk_v6_daddr __sk_common.skc_v6_daddr | ^~~~~~~~~~~~ ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr' 55 | &sk->sk_v6_daddr, 16); | ^~~~~~~~~~~ At top level: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function] 47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk) Fixes: 5229a96e59ec ("net/mlx5e: Accel, Expose flow steering API for rules add/del") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net/mlx5: Fix wrong address reclaim when command interface is downEran Ben Elisha1-2/+19
When command interface is down, driver to reclaim all 4K page chucks that were hold by the Firmeware. Fix a bug for 64K page size systems, where driver repeatedly released only the first chunk of the page. Define helper function to fill 4K chunks for a given Firmware pages. Iterate over all unreleased Firmware pages and call the hepler per each. Fixes: 5adff6a08862 ("net/mlx5: Fix incorrect page count when in internal error") Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge tag 'wireless-drivers-2020-12-03' of ↵Jakub Kicinski4-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.10 Second, and most likely final, set of fixes for v5.10. Small fixes and PCI id addtions. iwlwifi * PCI id additions mt76 * fix a kernel crash during device removal rtw88 * fix uninitialized memory in debugfs code * tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: rtw88: debug: Fix uninitialized memory in debugfs code mt76: usb: fix crash on device removal iwlwifi: pcie: add some missing entries for AX210 iwlwifi: pcie: invert values of NO_160 device config entries iwlwifi: pcie: add one missing entry for AX210 iwlwifi: update MAINTAINERS entry ==================== Link: https://lore.kernel.org/r/20201203183408.EE88AC43461@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net: mvpp2: Fix error return code in mvpp2_open()Wang Hai1-0/+1
Fix to return negative error code -ENOENT from invalid configuration error handling case instead of 0, as done elsewhere in this function. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03chelsio/chtls: fix a double free in chtls_setkey()Dan Carpenter1-0/+1
The "skb" is freed by the transmit code in cxgb4_ofld_send() and we shouldn't use it again. But in the current code, if we hit an error later on in the function then the clean up code will call kfree_skb(skb) and so it causes a double free. Set the "skb" to NULL and that makes the kfree_skb() a no-op. Fixes: d25f2f71f653 ("crypto: chtls - Program the TLS session Key") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03rtw88: debug: Fix uninitialized memory in debugfs codeDan Carpenter1-0/+2
This code does not ensure that the whole buffer is initialized and none of the callers check for errors so potentially none of the buffer is initialized. Add a memset to eliminate this bug. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
2020-12-02vxlan: fix error return code in __vxlan_dev_create()Zhang Changzhong1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02net: pasemi: fix error return code in pasemi_mac_open()Zhang Changzhong1-2/+6
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup") Fixes: 8d636d8bc5ff ("pasemi_mac: jumbo frame support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02cxgb3: fix error return code in t3_sge_alloc_qset()Zhang Changzhong1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b1fb1f280d09 ("cxgb3 - Fix dma mapping error path") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02dpaa_eth: copy timestamp fields to new skb in A-050385 workaroundYangbo Lu1-1/+9
The timestamp fields should be copied to new skb too in A-050385 workaround for later TX timestamping handling. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02mt76: usb: fix crash on device removalStanislaw Gruszka1-8/+9
Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx() code. This causes crash on device removal as we try to cleanup empty queue: [ 96.495571] kernel BUG at include/linux/skbuff.h:2297! [ 96.498983] invalid opcode: 0000 [#1] SMP PTI [ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11 [ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 96.504378] Workqueue: usb_hub_wq hub_event [ 96.505983] RIP: 0010:skb_pull+0x2d/0x30 [ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70 [ 96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287 [ 96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000 [ 96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800 [ 96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728 [ 96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800 [ 96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8 [ 96.523455] FS: 0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000 [ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0 [ 96.534678] Call Trace: [ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb] [ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76] [ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb] [ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u] [ 96.553638] drv_stop+0x33/0xd0 [mac80211] [ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211] [ 96.561262] ? dev_deactivate_many+0x298/0x2d0 [ 96.565101] ieee80211_stop+0x16/0x20 [mac80211] Fix that by adding while loop again. We need loop, not just single check, to clean all pending entries. Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending() as we want to tx_worker to run to process tx queues, while we wait for exactly that. I was a bit worried about accessing q->queued without lock, but mt76_worker_disable() -> kthread_park() should assure this value will be seen updated on other cpus. Fixes: fe5b5ab52e9d ("mt76: unify queue tx cleanup code") Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
2020-12-02iwlwifi: pcie: add some missing entries for AX210Golan Ben Ami1-0/+5
Some subsytem device IDs were missing from the list, so some AX210 devices were not recognized. Add them. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 18:43:08 +0000