summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ti
AgeCommit message (Collapse)AuthorFilesLines
2019-07-20wireless: fix nl80211 vendor commandsJohannes Berg1-0/+3
In my previous commit to validate a policy I neglected to actually add one to the few drivers using vendor commands, fix that now. Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Fixes: 901bb9891855 ("nl80211: require and validate vendor command policy") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-38/+0
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner2-8/+2
so the hyper-v clocksource update can be applied.
2019-06-24wl18xx: Fix Wunused-const-variableNathan Huckleberry1-38/+0
Clang produces the following warning drivers/net/wireless/ti/wl18xx/main.c:1850:43: warning: unused variable 'wl18xx_iface_ap_cl_limits' [-Wunused-const-variable] static const struct ieee80211_iface_limit wl18xx_iface_ap_cl_limits[] = { ^ drivers/net/wireless/ti/wl18xx/main.c:1869:43: warning: unused variable 'wl18xx_iface_ap_go_limits' [-Wunused-const-variable] static const struct ieee80211_iface_limit wl18xx_iface_ap_go_limits[] = { ^ The commit that added these variables never used them. Removing them. Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/530 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld3-3/+3
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2-8/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner92-1379/+92
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner7-0/+7
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of ↵David S. Miller2-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg2-6/+6
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25wlcore: simplify/fix/optimize reg_ch_conf_pending operationsPaolo Bonzini2-11/+8
Bitmaps are defined on unsigned longs, so the usage of u32[2] in the wlcore driver is incorrect. As noted by Peter Zijlstra, casting arrays to a bitmap is incorrect for big-endian architectures. When looking at it I observed that: - operations on reg_ch_conf_pending is always under the wl_lock mutex, so set_bit is overkill - the only case where reg_ch_conf_pending is accessed a u32 at a time is unnecessary too. This patch cleans up everything in this area, and changes tmp_ch_bitmap to have the proper alignment. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+7
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01wl18xx: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-19/+1
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01wl12xx: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-19/+1
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01wl1251: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-54/+5
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01wlcore: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2-31/+7
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01wlcore: clean up an indentation issueColin Ian King1-1/+1
There is a goto statement that is missing a tab for indentation. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-22wlcore: sdio: Fixup power on/off sequenceUlf Hansson1-8/+7
During "wlan-up", we are programming the FW into the WiFi-chip. However, re-programming the FW doesn't work, unless a power cycle of the WiFi-chip is made in-between the programmings. To conform to this requirement and to fix the regression in a simple way, let's start by allowing that the SDIO card (WiFi-chip) may stay powered on (runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the current code is to treat this scenario as an error, but unfortunate this doesn't work as expected, so let's fix this. The other part is to guarantee that a power cycle of the SDIO card has been completed when wl12xx_sdio_power_on() returns, as to allow the FW programming to succeed. However, relying solely on runtime PM to deal with this isn't sufficient. For example, userspace may prevent runtime suspend via sysfs for the device that represents the SDIO card, leading to that the mmc core also keeps it powered on. For this reason, let's instead do a brute force power cycle in wl12xx_sdio_power_on(). Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10wlcore: Fix memory leak in case wl12xx_fetch_firmware failureZumeng Chen1-2/+5
Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-03Merge tag 'wireless-drivers-next-for-davem-2018-11-30' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 First set of patches for 4.21. Most notable here is support for Quantenna's QSR1000/QSR2000 chipsets and more flexible ways to provide nvram files for brcmfmac. Major changes: brcmfmac * add support for first trying to get a board specific nvram file * add support for getting nvram contents from EFI variables qtnfmac * use single PCIe driver for all platforms and rename Kconfig option CONFIG_QTNFMAC_PEARL_PCIE to CONFIG_QTNFMAC_PCIE * add support for QSR1000/QSR2000 (Topaz) family of chipsets ath10k * add support for WCN3990 firmware crash recovery * add firmware memory dump support for QCA4019 wil6210 * add firmware error recovery while in AP mode ath9k * remove experimental notice from dynack feature iwlwifi * PCI IDs for some new 9000-series cards * improve antenna usage on connection problems * new firmware debugging infrastructure * some more work on 802.11ax * improve support for multiple RF modules with 22000 devices cordic * move cordic macros and defines to a public header file * convert brcmsmac and b43 to fully use cordic library ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06wlcore: Fix the return value in case of error in ↵Christophe JAILLET1-1/+1
'wlcore_vendor_cmd_smart_config_start()' We return 0 unconditionally at the end of 'wlcore_vendor_cmd_smart_config_start()'. However, 'ret' is set to some error codes in several error handling paths and we already return some error codes at the beginning of the function. Return 'ret' instead to propagate the error code. Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06wlcore: Fixup "Add support for optional wakeirq"John Stultz1-6/+11
After commit 3c83dd577c7f ("wlcore: Add support for optional wakeirq") landed upstream, I started seeing the following oops on my HiKey board: [ 1.870279] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010 [ 1.870283] Mem abort info: [ 1.870287] ESR = 0x96000005 [ 1.870292] Exception class = DABT (current EL), IL = 32 bits [ 1.870296] SET = 0, FnV = 0 [ 1.870299] EA = 0, S1PTW = 0 [ 1.870302] Data abort info: [ 1.870306] ISV = 0, ISS = 0x00000005 [ 1.870309] CM = 0, WnR = 0 [ 1.870312] [0000000000000010] user address but active_mm is swapper [ 1.870318] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.0-05129-gb3d1e8e #48 [ 1.870331] Hardware name: HiKey Development Board (DT) [ 1.870350] Workqueue: events_freezable mmc_rescan [ 1.870358] pstate: 60400005 (nZCv daif +PAN -UAO) [ 1.870366] pc : wl1271_probe+0x210/0x350 [ 1.870371] lr : wl1271_probe+0x210/0x350 [ 1.870374] sp : ffffff80080739b0 [ 1.870377] x29: ffffff80080739b0 x28: 0000000000000000 [ 1.870384] x27: 0000000000000000 x26: 0000000000000000 [ 1.870391] x25: 0000000000000036 x24: ffffffc074ecb598 [ 1.870398] x23: ffffffc07ffdce78 x22: ffffffc0744ed808 [ 1.870404] x21: ffffffc074ecbb98 x20: ffffff8008ff9000 [ 1.870411] x19: ffffffc0744ed800 x18: ffffff8008ff9a48 [ 1.870418] x17: 0000000000000000 x16: 0000000000000000 [ 1.870425] x15: ffffffc074ecb503 x14: ffffffffffffffff [ 1.870431] x13: ffffffc074ecb502 x12: 0000000000000030 [ 1.870438] x11: 0101010101010101 x10: 0000000000000040 [ 1.870444] x9 : ffffffc075400248 x8 : ffffffc075400270 [ 1.870451] x7 : 0000000000000000 x6 : 0000000000000000 [ 1.870457] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.870463] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.870469] x1 : 0000000000000028 x0 : 0000000000000000 [ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____)) [ 1.870480] Call trace: [ 1.870485] wl1271_probe+0x210/0x350 [ 1.870491] sdio_bus_probe+0x100/0x128 [ 1.870500] really_probe+0x1a8/0x2b8 [ 1.870506] driver_probe_device+0x58/0x100 [ 1.870511] __device_attach_driver+0x94/0xd8 [ 1.870517] bus_for_each_drv+0x70/0xc8 [ 1.870522] __device_attach+0xe0/0x140 [ 1.870527] device_initial_probe+0x10/0x18 [ 1.870532] bus_probe_device+0x94/0xa0 [ 1.870537] device_add+0x374/0x5b8 [ 1.870542] sdio_add_func+0x60/0x88 [ 1.870546] mmc_attach_sdio+0x1b0/0x358 [ 1.870551] mmc_rescan+0x2cc/0x390 [ 1.870558] process_one_work+0x12c/0x320 [ 1.870563] worker_thread+0x48/0x458 [ 1.870569] kthread+0xf8/0x128 [ 1.870575] ret_from_fork+0x10/0x18 [ 1.870583] Code: 92400c21 b2760021 a90687a2 97e95bf9 (f9400803) [ 1.870587] ---[ end trace 1e15f81d3c139ca9 ]--- It seems since we don't have a wakeirq value in the dts, the wakeirq value in wl1271_probe() is zero, which then causes trouble in irqd_get_trigger_type(irq_get_irq_data(wakeirq)). This patch tries to address this by checking if wakeirq is zero, and not trying to add it to the resources if that is the case. Fixes: 3c83dd577c7f ("wlcore: Add support for optional wakeirq") Cc: Tony Lindgren <tony@atomide.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Eyal Reizer <eyalr@ti.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: linux-wireless@vger.kernel.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05wlcore: Add support for optional wakeirqTony Lindgren3-9/+40
Now with wlcore using PM runtime, we can also add support for Linux generic wakeirq handling for it if configured in the dts file. The wakeirq can be configured as the second interrupt in the dts file with interrupts-extended property where it is the padconf irq of the OOB GPIO pin used for wlcore interrupt. Note that eventually we should also allow configuring wlcore to use the SDIO dat1 IRQ for wake-up, and in that case the the wakeirq should be configured to be the padconf interrupt of the dat1 pin and not the padconf interrupt of the OOB GPIO pin. Cc: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05wlcore: Fix BUG with clear completion on timeoutTony Lindgren1-4/+14
We do not currently clear wl->elp_compl on ELP timeout and we have bogus lingering pointer that wlcore_irq then will try to access after recovery is done: BUG: spinlock bad magic on CPU#1, irq/255-wl12xx/580 ... (spin_dump) from [<c01b9344>] (do_raw_spin_lock+0xc8/0x124) (do_raw_spin_lock) from [<c09b3970>] (_raw_spin_lock_irqsave+0x68/0x74) (_raw_spin_lock_irqsave) from [<c01a02f0>] (complete+0x24/0x58) (complete) from [<bf572610>] (wlcore_irq+0x48/0x17c [wlcore]) (wlcore_irq [wlcore]) from [<c01c5efc>] (irq_thread_fn+0x2c/0x64) (irq_thread_fn) from [<c01c623c>] (irq_thread+0x148/0x290) (irq_thread) from [<c016b4b0>] (kthread+0x160/0x17c) (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) ... After that the system will hang. Let's fix this by adding a flag for recovery and moving the recovery work call to to the error handling section. And we want to set WL1271_FLAG_INTENDED_FW_RECOVERY and actually clear it too in wl1271_recovery_work() and just downgrade the error to a warning to prevent overly verbose output. Cc: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-31wlcore: Set rx_status boottime_ns field on rxLoic Poulain1-2/+6
When receiving a beacon or probe response, we should update the boottime_ns field which is the timestamp the frame was received at. (cf mac80211.h) This fixes a scanning issue with Android since it relies on this timestamp to determine when the AP has been seen for the last time (via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31wlcore: remove duplicate \n for some warningsH. Nikolaus Schaller1-5/+5
wl1271_warning() already appends a \n to the format, so adding one to the warning string gives empty lines in the log. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap2-0/+2
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-04wlcore: Fix memory leak in wlcore_cmd_wait_for_event_or_timeoutGustavo A. R. Silva1-2/+2
In case memory resources for *events_vector* were allocated, release them before return. Addresses-Coverity-ID: 1470194 ("Resource leak") Fixes: 4ec7cece87b3 ("wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wireless-drivers: use BIT_ULL for NL80211_STA_INFO_ attribute typesOmer Efrat1-1/+1
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in wireless-drivers by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Enable runtime PM autosuspend supportTony Lindgren9-59/+121
With runtime PM tested working for wlcore with no autosuspend, we can now enable autosuspend to cut down on enable/disable for interrupts. Basically we just replace pm_runtime_put() with the autosuspend variants. Let's use autosuspend delay of 50ms that MMC drivers typically use. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Make sure firmware is initialized in wl1271_op_add_interface()Tony Lindgren1-13/+18
We have wl12xx_boot() call wl12xx_enable_interrupts() and if we have wl1271_op_add_interface() call pm_runtime_get_sync() before the interrupts are enabled. And then we get the following error during boot: wlcore: ERROR ELP wakeup timeout! Let's fix this by first checking if we need to boot the firmware. And only after that call pm_runtime_get_sync() when interrupts are enabled. And only after that do the check for wl12xx_need_fw_change(). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Use generic runtime pm calls for wowlan elp configurationEyal Reizer1-38/+13
With runtime PM enabled, we can now use calls to pm_runtime_force_suspend and pm_runtime_force_resume for enabling elp during suspend when wowlan is enabled and waking the chip from elp on resume. Remove the custom API that was used to ensure that the command that is used to allow ELP during suspend is completed before the system suspend. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Fix timout errors after recoveryTony Lindgren1-2/+1
After enabling runtime PM, if we force hardware reset multiple times with: # echo 1 > /sys/kernel/debug/ieee80211/phy0/wlcore/start_recovery We will after few tries get the following error: wlcore: ERROR timeout waiting for the hardware to complete initialization And then wlcore is unable to reconnect until after the wlcore related modules are reloaded. Let's fix this by moving pm_runtime_put() earlier before we restart the hardware. And let's use the sync version to make sure we're done before we restart. Note that we still will get -EBUSY warning from wl12xx_sdio_set_power() but let's fix that separately once we know exactly why we get the warning. Reported-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Fix misplaced PM call for scan_complete_work()Tony Lindgren1-2/+2
With runtime PM enabled, we now need to have wlcore enabled longer until after we're done calling wlcore_cmd_regdomain_config_locked(): scan_complete_work() wlcore_cmd_regdomain_config_locked() wlcore_cmd_send_failsafe() wl12xx_sdio_raw_read() Note that this is not needed before runtime PM support as the custom PM code had it's own timer. We have not yet enabled runtime PM autosuspend for wlcore and this is why this issue now shows up. Let's fix the issues first before we enable runtime PM autosuspend. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Add support for runtime PMTony Lindgren14-338/+416
We can update wlcore to use PM runtime by adding functions for wlcore_runtime_suspend() and wlcore_runtime_resume() and replacing calls to wl1271_ps_elp_wakeup() and wl1271_ps_elp_sleep() with calls to pm_runtime_get_sync() and pm_runtime_put(). Note that the new wlcore_runtime_suspend() and wlcore_runtime_resume() functions are based on simplified versions of wl1271_ps_elp_sleep() and wl1271_ps_elp_wakeup(). We don't want to use the old functions as we can now take advantage of the runtime PM usage count. And we don't need the old elp_work at all. And we can also remove WL1271_FLAG_ELP_REQUESTED that is no longer needed. Pretty much the only place where we are not just converting the existing functions is wl1271_op_suspend() where we add pm_runtime_put_noidle() to keep the calls paired. As the next step is to implement runtime PM autosuspend, let's not add wrapper functions for the generic runtime PM calls. We would be getting rid of any wrapper functions anyways. After autoidle we should be able to start using Linux generic wakeirqs for the padconf interrupt. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Make sure PM calls are pairedTony Lindgren1-2/+8
The call to wl1271_ps_elp_wakeup() in wl12xx_queue_recovery_work() is unpaired. Let's remove it and add paired calls to wl1271_recovery_work() instead in preparation for changing things to use runtime PM. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()Tony Lindgren1-0/+6
Otherwise we can get: WARNING: CPU: 0 PID: 55 at drivers/net/wireless/ti/wlcore/io.h:84 I've only seen this few times with the runtime PM patches enabled so this one is probably not needed before that. This seems to work currently based on the current PM implementation timer. Let's apply this separately though in case others are hitting this issue. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29wlcore: sdio: check for valid platform device data before suspendEyal Reizer1-0/+5
the wl pointer can be null In case only wlcore_sdio is probed while no WiLink module is successfully probed, as in the case of mounting a wl12xx module while using a device tree file configured with wl18xx related settings. In this case the system was crashing in wl1271_suspend() as platform device data is not set. Make sure wl the pointer is valid before using it. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29wlcore: sdio: Fix flakey SDIO runtime PM handlingTony Lindgren1-4/+12
We can have pm_runtime_get_sync() return 1, and we can have pm_runtime_put_sync() return -EBUSY. See rpm_suspend() and rpm_resume() for more information. Fix the issue by returning 0 from wl12xx_sdio_power_on() on success. And use pm_runtime_put() instead of pm_runtime_put_sync() for wl12xx_sdio_power_off(), then the MMC subsystem will idle the bus when suitable. Otherwise wlcore can sometimes get confused and may report bogus errors and WLAN connection can fail. Note that while wlcore checks the return value for wl1271_power_on(), the return value is ignored for wl1271_power_off(). Let's fix them both though to avoid further confusion in the future. Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30wlcore: sdio: allow pm to handle sdio powerEyal Reizer1-21/+6
pm_runtime handles sdio power on and power off transitions. An old workaround for trying to control the power explicitly from the driver was in fact causing failures on suspend/resume as the mmc layer already power the module on resume. In case of resume pm_runtime_get sync returns a positive device's usage count causing the driver to try an re-initialize an already initialized device. This was causing sdio bus failure on resume. Remove this manual power on/off sequence as it is in-fact not needed. Signed-off-by: Eyal Reizer <eyalr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches4-24/+20
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-25Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of ↵David S. Miller2-20/+86
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.17 The biggest changes are the bluetooth related patches to the rsi driver. It adds a new bluetooth driver which communicates directly with the wireless driver and the interface is defined in include/net/rsi_91x.h. Major changes: wl1251 * read the MAC address from the NVS file rtlwifi * enable mac80211 fast-tx support mt76 * add capability to select tx/rx antennas mt7601 * let mac80211 validate rx CCMP Packet Number (PN) rsi * bluetooth: add new btrsi driver * btcoex support with the new btrsi driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-15net: drivers/net: Remove unnecessary skb_copy_expand OOM messagesJoe Perches1-3/+1
skb_copy_expand without __GFP_NOWARN already does a dump_stack on OOM so these messages are redundant. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13net/wireless: fix spaces and grammar copy/paste in vendor Kconfig help textRandy Dunlap1-2/+2
Lots of the wireless driver vendor Kconfig symol help text says "questions about cards." (2 spaces between "about" and "cards") Besides dropping one of those spaces, it also needs some other word inserted there. Instead of putting each vendor's name there, I chose to say "these" cards in all of the Kconfig help text. Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27wl1251: Set generated MAC address back to NVS dataPali Rohár1-0/+17
In case there is no valid MAC address kernel generates random one. This patch propagate this generated MAC address back to NVS data which will be uploaded to wl1251 chip. So HW would have same MAC address as linux kernel uses. This should not change any functionality, but it is better to tell wl1251 correct mac address since beginning of chip usage. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27wl1251: Parse and use MAC address from supplied NVS dataPali Rohár1-8/+47
This patch implements parsing MAC address from NVS data which are sent to wl1251 chip. Calibration NVS data could contain valid MAC address and it will be used instead of randomly generated one. This patch also moves code for requesting NVS data from userspace to driver initialization code to make sure that NVS data will be there at time when permanent MAC address is needed. Calibration NVS data for wl1251 are device specific. Every device with wl1251 chip should have been calibrated in factory and needs to provide own calibration data. Default example file wl1251-nvs.bin, found in linux-firmware repository, contains MAC address 00:00:20:07:03:09. So this MAC address is marked as invalid as it is not real device specific address, just example one. Format of calibration NVS data can be found at: http://notaz.gp2x.de/misc/pnd/wl1251/nvs_map.txt Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27wl1251: Generate random MAC address only if driver does not have validPali Rohár1-9/+18
Before this patch, driver generated random MAC address every time it was initialized. After that random MAC address could be overwritten with fixed one, if provided. This patch changes order. First it tries to read fixed MAC address and if it fails then driver generates random MAC address. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27wl1251: Update wl->nvs_len after wl->nvs is validPali Rohár1-2/+3
If kmemdup fails, then wl->nvs_len will contain invalid non-zero size. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08wl1251: check return from call to wl1251_acx_arp_ip_filterColin Ian King1-2/+1
Currently the less than zero error check on ret is incorrect as it is checking a far earlier ret assignment rather than the return from the call to wl1251_acx_arp_ip_filter. Fix this by adding in the missing assginment. Detected by CoverityScan, CID#1164835 ("Logically dead code") Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 09:01:50 +0000