summaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154
AgeCommit message (Collapse)AuthorFilesLines
2017-01-12ieee802154: atusb: fix driver to work with older firmware versionsStefan Schmidt1-9/+4
After the addition of the frame_retries callback we could run into cases where a ATUSB device with an older firmware version would now longer be able to bring the interface up. We keep this functionality disabled now if the minimum firmware version for this feature is not available. Fixes: 5d82288b93db3bc ("ieee802154: atusb: implement .set_frame_retries ops callback") Reported-by: Alexander Aring <aar@pengutronix.de> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12at86rf230: Allow slow GPIO pins for "rstn"Andrey Smirnov1-2/+2
Driver code never touches "rstn" signal in atomic context, so there's no need to implicitly put such restriction on it by using gpio_set_value to manipulate it. Replace gpio_set_value to gpio_set_value_cansleep to fix that. As a an example of where such restriction might be inconvenient, consider a hardware design where "rstn" is connected to a pin of I2C/SPI GPIO expander chip. Cc: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12ieee802154: atusb: do not use the stack for address fetching to make it DMA ableStefan Schmidt1-1/+7
From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes a buffer that was introduced in the 4.10 merge window. Fixes: 6cc33eba232c ("ieee802154: atusb: try to read permanent extended address from device") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12ieee802154: atusb: make sure we set a randaom extended address if fetching failsStefan Schmidt1-2/+5
In the unlikely case were the firmware is new enough but the actual USB command still fails make sure we set a random address and return. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12ieee802154: atusb: do not use the stack for buffers to make them DMA ableStefan Schmidt1-4/+27
From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-5/+4
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-08ieee802154: atusb: implement .set_frame_retries ops callbackStefan Schmidt1-1/+18
From firmware version 0.3 onwards we use the TX_ARET mode allowing for automatic frame retransmissions. To actually make use of this feature we need to implement the callback for setting the frame retries. If the firmware version is to old print a warning and return with invalid value. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: try to read permanent extended address from deviceStefan Schmidt1-1/+39
With version 0.3 the atusb firmware offers an interface to read a permanent EUI64 address from the devices EEPROM. This patch checks if the firmware is new enough and tries to read out and use the address. If this does not work we fall back to the original randomly generated address. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: store firmware version after retrieval for later useStefan Schmidt1-5/+15
The firmware versions will be used to enable selective features based on the available firmware on the device. Make sure we do not need to fetch it for every check but store it after the initial retrieval. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: sync header file from firmware for new featuresStefan Schmidt1-3/+8
This file is shared between the atusb firmware and the kernel driver. In this update it brings the new interfaces from version 0.3 of the firmware. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-30ieee802154: fakelb: print number of created fake devices during probeStefan Schmidt1-1/+1
When using fakelb with different network sizes it becomes handy to have the number of created fake devices printed in the log as well. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2016-11-30at86rf230: fix cca ed values for rf233Alexander Aring1-5/+11
This patch changes the rssi base value to -94 for at86rf33 transceivers. The code before assumes a rssi base value of -91 which is for the at86rf231 transceiver only. This change need to update the cca ed threshold mapping table. Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2016-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
udplite conflict is resolved by taking what 'net-next' did which removed the backlog receive method assignment, since it is no longer necessary. Two entries were added to the non-priv ethtool operations switch statement, one in 'net' and one in 'net-next, so simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: ieee802154: drop duplicate header delay.hGeliang Tang1-1/+0
Drop duplicate header delay.h from adf7242.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-21net: ieee802154: constify ieee802154_ops structuresBhumika Goyal2-2/+2
Declare the structure ieee802154_ops as const as it is only passed as an argument to the function ieee802154_alloc_hw. This argument is of type const struct ieee802154_ops *, so ieee80254_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct ieee802154_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1; @@ ieee802154_alloc_hw(e1,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct ieee802154_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct ieee802154_ops i; The before and after size details of the affected files are: text data bss dec hex filename 8669 1176 16 9861 2685 drivers/net/ieee802154/adf7242.o 8805 1048 16 9869 268d drivers/net/ieee802154/adf7242.o text data bss dec hex filename 7211 2296 32 9539 2543 drivers/net/ieee802154/atusb.o 7339 2160 32 9531 253b drivers/net/ieee802154/atusb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19fakelb: fix schedule while atomicAlexander Aring1-7/+7
This patch changes the spinlock to mutex for the available fakelb phy list. When holding the spinlock the ieee802154_unregister_hw is called which holding the rtnl_mutex, in that case we get a "BUG: sleeping function called from invalid context" error. We simple change the spinlock to mutex which allows to hold the rtnl lock there. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-12mrf24j40: avoid uninitialized byte in SPI transfer to radio.Walter Mack1-0/+2
isr function issues SPI read command to mrf to obtain INTSTAT. SPI transfer is 2 bytes, but value of 2nd byte is not defined. This had the effect that only the first ISR worked as intended. The second ISR read incorrect INTSTAT values. Observed on Raspberry PI B+. Signed-off-by: Walter Mack <wmack@componentsw.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08fakelb: allow to run as monitorAlexander Aring1-0/+8
For my RIOT-OS in userspace experiments I need to create a fakelb monitor interface. The fakelb doesn't filter anything on L2 and is a purely raw interface. Because nl802154 checks on promiscuous mode which need to supported by creating monitors this patch adds some no-op promiscuous mode setting and the promiscuous flag. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08atusb: don't change csma settings while set channelAlexander Aring1-5/+1
This patch fixes the behaviour to not overwrite csma settings when set channel afterwards. Cc: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-19net: ieee802154/adf7242: syntax error ifdef DEBUGxypron.glpk@gmx.de1-1/+0
If DEBUG is defined, a superfluous closing brace is introduced. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21ieee802154: atusb: update my copyright years for this driverStefan Schmidt1-0/+2
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21ieee802154: atusb: implement .set_cca_mode ops callbackStefan Schmidt1-1/+43
Catching up with the stack here and implement CCA mode setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21ieee802154: atusb: implement .set_cca_ed_level ops callbackStefan Schmidt1-1/+26
Catching up with the stack here and implement CCA ED level setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21ieee802154: atusb: implement .set_csma_params ops callbackStefan Schmidt1-1/+19
Catching up with the stack here and implement CSMA parameter setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-20at86rf230: increase sleep to off timingsAlexander Aring1-3/+3
I expierenced when setting channel while sleep mode it didn't changed the channel inside the hardware registers. Then I got another report of an user which has similar issues. I increased the sleep to off state change timing, which is according at86rf233 at maximum 1000 us. After this change I got no similar effects again. I tried another option to wait on AWAKE_END irq, which can be used to wait until the transceiver is awaked. I tested it and the IRQ took 4 seconds after starting state change. I don't believe it takes 4 seconds to go into the TRX_OFF state from SLEEP state. The alternative is to increase the timings which seems to work. Cc: Oleg Hahm <oliver.hahm@inria.fr> Signed-off-by: Alexander Aring <aar@pengutronix.de> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13mrf24j40: apply the security-enabled bit on secured outbound framesAlexandre Macabies1-0/+4
We set the TXNSECEN bit of register TXNCON to on when transmitting a security-enabled frame, as described in section 3.12.2 of the MRF datasheet. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Alexandre Macabies <web+oss@zopieux.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13mrf24j40: fix security-enabled processing on inbound framesAlexandre Macabies1-1/+9
When receiving a security-enabled IEEE 802.15.4 frame, the MRF24J40 triggers a SECIF interrupt that needs to be handled for RX processing to keep functioning properly. This patch enables the SECIF interrupt and makes the MRF ignores all hardware processing of security-enabled frames, that is handled by the ieee802154 stack instead. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Alexandre Macabies <web+oss@zopieux.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08ieee802154/adf7242: fix memory leak of firmwareSudip Mukherjee1-0/+2
If the firmware upload or the firmware verification fails then we printed the error message and exited but we missed releasing the firmware. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23mrf24j40: add writeable missing regAlexander Aring1-0/+1
This patch adds a missing reg for writeable stuff for regmap. Cc: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix state change handling on errorAlexander Aring1-4/+3
This patch force always to set "is_tx_from_off", when calibration timeout was not occurred. In case of error handling the is_tx_from_off can be inside in an invalid state. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix race on error handlingAlexander Aring1-4/+14
The resource "ctx" can be still used by at86rf230_async_state_change, we need to free it at the complete handler of the async state change to avoid a use after free. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-03ieee802154: cc2520: Check CRC & add promiscuousBrad Campbell1-23/+122
This patch adds checking the "CRC_OK" bit at the end of packets coming from the CC2520 radio. It also adds support for putting the radio in promiscuous mode (in which packets are not dropped if the CRC fails). In promiscuous mode the AUTOCRC flag is cleared so that the driver can pass the received CRC to the monitors. The radio now defaults to frame filtering (checking that the destination and PANID in the incoming packet matches the local node). This matches the other 15.4 radios and is what a user would expect to be the default. Other changes: 1. Adds LQI calculation 2. Makes #defines for relevant bit fields in CC2520 registers Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-11ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154Michael Hennerich3-0/+1297
This driver has been sitting in the linux-zigbee[2] repository for a long time. We updated it from time to time and made it available via our github kernel repository. The Linux MAC802.15.4 support has improved a lot since then. Thanks to all! So it’s finally time to upstream this driver. The ADF7242 requires an add-on firmware for the automatic IEEE 802.15.4 operating modes. The firmware file is currently made available on the ADF7242 wiki page here [1] [1] http://wiki.analog.com/resources/tools-software/linux-drivers/networking-mac802154/adf7242 [2] http://sourceforge.net/p/linux-zigbee/kernel/ci/devel/tree/drivers/ieee802154/adf7242.c Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-11ieee802154-atusb: Delete an unnecessary check before the function call ↵Markus Elfring1-2/+1
"kfree_skb" The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis3-3/+0
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-24mrf24j40: remove trailing semicolonAlexander Aring1-1/+1
This patch removes a trailing semicolon which was introduced by commit d3f1bc3 ("mrf24j40: add cca mode support") and reported by kbuild test robot. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: replace magic numbersAlexander Aring1-38/+98
This patch replaces some magic numbers with defines for register bits, mask and shifts. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: change irq trigger type behaviourAlexander Aring1-3/+28
This patch changes the irq trigger type value while calling devm_request_irq by using IRQF_TRIGGER_LOW when no irq type was given. Additional we add support for change the irq polarity while hw init if high level or low level triggered irq type are given. For rising edge triggered irq's the mrf24j40 can't deal with that, this races at position of tx completion irq, while the irq is disabled we readout the irq status registers. This will resets the irq line so other irq's can occur. Wile readout the irq status register the irq is still disabled and edge triggered interrupts will be ignored. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add promiscuous mode supportAlexander Aring1-1/+21
This patch adds support for promiscuous mode by setting promiscuous (no frame filtering), disable automatic ack handling and not filtering frames where the crc is invalid. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add tx power supportAlexander Aring1-0/+71
This patch supports setting of transmit power for the mrf24j40ma transceiver only. The mrf24j40mc has some amplifier to change the transmit power, I am currently not sure how the mapping for this amplifier looks like. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add cca ed level supportAlexander Aring1-1/+49
This patch supports handling to set the cca energy detection level for the mrf24j40 transceiver. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add cca mode supportAlexander Aring1-0/+40
This patch supports cca mode handling for mrf24j40. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add csma params supportAlexander Aring1-1/+26
This patch adds supports to change the CSMA parameters. The datasheet doesn't say anything about max_be value. Seems not configurable and we assume the 802.15.4 default. But this value must exists because there is a min_be value. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: async interrupt handlingAlexander Aring1-53/+40
This patch removes the threaded irq handling and do a hardirq instead. We need to switch to spi_async for this step for getting the irq status register. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: rework rx handling to async rx handlingAlexander Aring1-164/+118
This patch prepares that we can do the receive handling inside interrupt context by using spi_async. This is necessary for introduce a non-threaded irq handling. Also we drop the bit setting for "RXDECINV" at register "BBREG1", we do a driectly full write of register "BBREG1", because it contains the bit RXDECINV only. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: rework tx handling to async tx handlingAlexander Aring1-83/+78
This patch reworks the current transmit API to spi_async handling. We removed the error handling check, because mac802154 has no chance to report it. Also the transmit timeout handling can't be handled by xmit async handling, for this usecase we need to implement the netdev watchdog. These are all unlikely cases which we drop now and should be provided by netdev watchdog. We also drop the bit setting for TXNACKREQ at register TXNCON, this is not necessary. The TXNCON register should set only once for each frame, previous settings doesn't matter. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: change to frame delivery with crcAlexander Aring1-4/+1
This patch changes the frame delivery to mac802154 with crc. This is useful for monitor interface types which deliver the crc to userspace. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: use regmap for register accessAlexander Aring1-97/+50
This patch uses the regmap functions for transceiver register settings where it's possible. This means everything except the hotpaths like receive/transmit handling. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add regmap supportAlexander Aring2-0/+313
This patch introduce regmap support for short and long address space of mrf24j40. It's only possible to use regmap_read/write/update_bits for long address range. This is because I added lowlevel bus operation because the write operation need to set the 12th bit to mark a register write, but regmap only supports to set bits for register write access in the first byte. We use other regmap register functions than read/write/update_bits, so this should be fine. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 23:39:40 +0000