summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/amd
AgeCommit message (Collapse)AuthorFilesLines
2016-11-13amd-xgbe: Add support for a KR redriverLendacky, Thomas5-37/+458
This patch provides support for the presence of a KR redriver chip in between the device PCS and an external PHY. When a redriver chip is present the device must perform clause 73 auto-negotiation in order to set the redriver chip for the downstream connection. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for MDIO attached PHYsLendacky, Thomas6-11/+557
Use the phylib support in the kernel to communicate with and control an MDIO attached PHY. Use the hardware's MDIO communication mechanism to communicate with the PHY. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for SFP+ modulesLendacky, Thomas6-8/+1642
Add support for recognizing and using SFP+ modules directly. This includes using the I2C support to read and interpret the information returned from an SFP+ module and configuring things properly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add I2C support for sideband communicationLendacky, Thomas9-1/+753
Add support to initialize and use the I2C controller within the hardware in order to perform sideband communication, e.g. determine the SFP media type that is installed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add ECC status support for the device memoryLendacky, Thomas7-3/+340
Some versions of the amd-xgbe device are capable of reporting ECC error information back to the driver. Add support to process, track and report on this information. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for new DMA interrupt modeLendacky, Thomas6-36/+91
The current per channel DMA interrupt support is based on an edge triggered interrupt that is not maskable. This results in having to call the disable_irq/enable_irq functions in order to prevent interrupts during napi processing. The hardware now has a way to configure the per channel DMA interrupt that will allow for masking the interrupt which prevents calling disable_irq/enable_irq now. This patch makes use of this support. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Allow for a greater number of Rx queuesLendacky, Thomas1-2/+1
Remove the call to netif_get_num_default_rss_queues() and replace it with num_online_cpus() to allow for the possibility of using all of the hardware DMA channels available. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add PCI device supportLendacky, Thomas11-20/+1657
Add support for new PCI devices to the driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add a workaround for Tx timestamp issueLendacky, Thomas3-3/+12
Update the reading of the Tx timestamp to account for a hardware issue on how the fields and interrupt are cleared. The "seconds" portion of the timestamp should be read first, followed by the "nanoseconds" portion. Reading the "nanoseconds" portion should clear the timestamp data and the interrupt. Because of an issue with the hardware this order is reversed and reading the "seconds" portion actually clears the timestamp. The code currently follows this workaround, but to guard against future versions where this is fixed add a field to the version data to indicate if the workaround is required or not. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Guard against incorrectly generated interruptsLendacky, Thomas1-1/+15
Due to a hardware issue, it is possible for interrupt events to be incorrectly generated when performing a soft reset. To guard against this, perform the soft reset twice. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: xgbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-31/+37
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: amd: pcnet32: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: amd8111e: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Prepare for supporting PCI devicesLendacky, Thomas6-510/+755
Update the driver framework to separate out platform/ACPI specific code from general code during device initialization. This will allow for the introduction of PCI device support. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Update how to determine DMA channel statusLendacky, Thomas3-21/+43
Tx and Rx DMA channel status determiniation is different depending on the version of the hardware. Update the channel status processing code to account for the change. Also, reduce the timeout value used when stopping the channels. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Support for 64-bit management counter registersLendacky, Thomas2-10/+27
Add support for reading all management counter registers as 64-bit values. The indication of whether to read the high 32-bits to form a 64-bit value is indicated in the version data. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Prepare for a new PCS register access methodLendacky, Thomas4-19/+119
Prepare the code to be able to support accessing of the PCS registers in a new way, while maintaining the current access method. Provide a version specific field that indicates the method to use. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Add support for clause 37 auto-negotiationLendacky, Thomas3-8/+286
Add support to be able to use clause 37 auto-negotiation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Prepare for introduction of clause 37 autonegLendacky, Thomas4-85/+176
Prepare for the future introduction of clause 37 auto-negotiation by updating the current auto-negotiation related functions to identify them as clause 73 functions. Move interrupt enablement to the enable/disable auto-negotiation functions. Update what will be common routines to check for the current type of AN and process accordingly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Prepare for working with more than one type of phyLendacky, Thomas8-660/+1140
Prepare the code to be able to work with more than one type of phy by adding additional callable functions into the phy interface and removing phy specific settings/functions from non-phy related files. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Perform priority-based hardware FIFO allocationLendacky, Thomas2-139/+434
Allocate the FIFO across the hardware Rx queues based on the priority of the queues. Giving more FIFO resources to queues with a higher priority. If PFC is active but not enabled for a queue, then less resources can allocated to the queue. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Prepare for priority-based FIFO allocationLendacky, Thomas2-17/+41
Currently, the Rx and Tx fifos are evenly allocated between the hardware queues of the device. As more queues are instantiated, the fifo memory needs to be able to be allocated based on queue priority. This allows for higher priority queues to have more fifo memory than lower priority queues. Prepare for this by modifying the current fifo calculation to assign the fifo queue allocation in an array that is then used to program the hardware. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04amd-xgbe: Fix formatting of PCS register dumpLendacky, Thomas1-12/+12
Fix the length value used for the PCS register dump so that the full value can be displayed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26amd-xgbe: Fix error return code in xgbe_probe()Wei Yongjun1-0/+1
Fix to return error code -ENODEV from the DMA is not supported error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson2-5/+2
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson1-3/+2
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson14-14/+0
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12ethernet: amd: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas2-4/+4
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31xgbe: constify get_netdev_ops and get_ethtool_opsstephen hemminger3-6/+7
Casting away const is bad practice. Since this is ARM specific driver don't have hardware actually test this. Having getter functions for ops is really unnecessary code bloat, but not going to touch that. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-29amd-xgbe: Reset running devices after resume from hibernateJames Morse1-1/+7
After resume from hibernate on arm64, any amd-xgbe devices that were running when we hibernated are reported as down, even when it is not. Re-plugging the cables does not cause the interface to come back, the link must be marked as down then up via 'ip set link' using the serial console. This happens because the device has been power-cycled and possibly re-initialised by firmware, whereas the driver's memory structures have been restored from the hibernate image and the two do not agree. Schedule a restart of the device after powerup in case the world changed while we were asleep. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: amd-xgbe: use correct format specifierxypron.glpk@gmx.de1-1/+1
i has been defined as unsigned int. So use %u for output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: amd: au1000_eth: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-21/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in au1000_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: amd: au1000_eth: use phydev from struct net_devicePhilippe Reynes2-25/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: au1000_eth: fix PHY detectionManuel Lauss1-2/+2
Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10Revert "net: au1000_eth: fix PHY detection"David S. Miller1-6/+7
This reverts commit a2f27217e4e60e663b5b971b0ccb287a9548b04e. I applied the wrong version of this. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: au1000_eth: fix PHY detectionManuel Lauss1-7/+6
Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19net: au1000 eth: simplify logical expressionxypron.glpk@gmx.de1-1/+1
(a && a > 0) is equivalent to (a > 0). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal10-13/+13
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26drivers: net: use NETDEV_TX_OK instead of NETDEV_TX_LOCKEDFlorian Westphal2-7/+8
These drivers already call netif_stop_queue() so we should not be called unless tx space is available. Just free the skb and return TX_OK. Followup patch will remove NETDEV_TX_LOCKED from the kernel. Cc: linux-parisc@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: relax setup_tc ndo op handle restrictionJohn Fastabend1-1/+1
I added this check in setup_tc to multiple drivers, if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) Unfortunately restricting to TC_H_ROOT like this breaks the old instantiation of mqprio to setup a hardware qdisc. This patch relaxes the test to only check the type to make it equivalent to the check before I broke it. With this the old instantiation continues to work. A good smoke test is to setup mqprio with, # tc qdisc add dev eth4 root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 0@0 1@1 2@2 3@3 4@4 5@5 6@6 7@7 Fixes: e4c6734eaab9 ("net: rework ndo tc op to consume additional qdisc handle paramete") Reported-by: Singh Krishneil <krishneil.k.singh@intel.com> Reported-by: Jake Keller <jacob.e.keller@intel.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-34/+34
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18lance: Return correct error codeAmitoj Kaur Chawla1-2/+2
Failure of kzalloc should cause the enclosing function to return -ENOMEM, not -ENODEV. Additionally, removed the following checkpatch warnings: ERROR: spaces required around that '==' (ctx:VxV) ERROR: space required before the open parenthesis '(' CHECK: Comparison to NULL could be written "!lp" Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Mask auto-negotiation interrupts in ISRLendacky, Thomas4-33/+41
Currently the auto-negotiation interrupt handling disables the irq instead of masking off the interrupts. This was done because the phy library was originally used to read and write the PCS registers, which could not be performed in interrupt context. Now that the phy library is no longer used to read and write the PCS registers the interrupts can be masked off in the interrupt service routine eliminating the need to call disable_irq/enable_irq. This also requires changing the protection mutex to a spinlock. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Check Rx queue fifos before stopping Rx DMALendacky, Thomas2-3/+37
Check to be sure that the Rx queue fifos are empty before stopping the Rx DMA channels. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Do traffic class setup when called through dcbnlLendacky, Thomas4-30/+70
Currently the netdev traffic class setup is only performed when invoked through the ndo_setup_tc interface. However, the same setup should be performed when the dcbnl interface (ieee_setets) is invoked. Rework the netdev traffic class setup to be invokable through either interface and also provide the priority to traffic class mapping if available. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Fix the mapping of priorities to traffic classesLendacky, Thomas1-29/+21
The driver is checking the pfc_en field of the ieee_pfc structure to determine whether to associate a priority with a traffic class. This is incorrect since the pfc_en field is for determining if PFC is enabled for a traffic class. The association of priority to traffic class does not depend on whether the traffic class is enabled for PFC, so remove that check. Also, the mapping of priorities to traffic classes should be done when configuring the traffic classes and not the PFC support so move the priority to traffic class association from xgbe_config_dcb_pfc to xgbe_config_dcb_tc. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Enable/disable PFC per traffic classLendacky, Thomas1-2/+34
Currently the PFC flow control is enabled on all traffic classes if one or more traffic classes request it. The PFC enable setting of the traffic class should be used to determine whether to enable or disable flow control for the traffic class. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Verify forced speed matches the active speedsetLendacky, Thomas1-2/+14
When using ethtool to set the speed for the device, verify that the specified speed is valid within the active speedset. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Use __napi_schedule_irqoffLendacky, Thomas1-2/+2
Change from calling __napi_schedule to __napi_schedule_irqoff when running in interrupt context or when called by netpoll with interrupts already disabled. The Tx timer function will continue to use __napi_schedule. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17amd-xgbe: Change from napi_complete to napi_complete_doneLendacky, Thomas1-4/+4
Change from using napi_complete to napi_complete_done to allow for the use of gro_flush_timeout in tuning network processing. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 16:25:44 +0000