summaryrefslogtreecommitdiffstats
path: root/drivers/iommu
AgeCommit message (Collapse)AuthorFilesLines
2018-07-20Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"Lu Baolu1-2/+30
This reverts commit ab96746aaa344fb720a198245a837e266fad3b62. The commit ab96746aaa34 ("iommu/vt-d: Clean up pasid quirk for pre-production devices") triggers ECS mode on some platforms which have broken ECS support. As the result, graphic device will be inoperable on boot. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017 Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-05Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up ↵Christoph Hellwig2-17/+46
intel_{alloc,free}_coherent()" This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Fabio Coatti <fabio.coatti@gmail.com> Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds6-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook1-1/+1
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2-2/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook3-4/+4
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Revert "iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and ↵Linus Torvalds2-22/+47
dma_direct_{alloc,free}()" This reverts commit b468620f2a1dfdcfddfd6fa54367b8bcc1b51248. It turns out that this broke drm on AMD platforms. Quoting Gabriel C: "I can confirm reverting b468620f2a1dfdcfddfd6fa54367b8bcc1b51248 fixes that issue for me. The GPU is working fine with SME enabled. Now with working GPU :) I can also confirm performance is back to normal without doing any other workarounds" Christan König analyzed it partially: "As far as I analyzed it we now get an -ENOMEM from dma_alloc_attrs() in drivers/gpu/drm/ttm/ttm_page_alloc_dma.c when IOMMU is enabled" and Christoph Hellwig responded: "I think the prime issue is that dma_direct_alloc respects the dma mask. Which we don't need if actually using the iommu. This would be mostly harmless exept for the the SEV bit high in the address that makes the checks fail. For now I'd say revert this commit for 4.17/4.18-rc and I'll look into addressing these issues properly" Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org # v4.17 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds4-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag
2018-06-08Merge tag 'iommu-updates-v4.18' of ↵Linus Torvalds11-115/+122
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "Nothing big this time. In particular: - Debugging code for Tegra-GART - Improvement in Intel VT-d fault printing to prevent soft-lockups when on fault storms - Improvements in AMD IOMMU event reporting - NUMA aware allocation in io-pgtable code for ARM - Various other small fixes and cleanups all over the place" * tag 'iommu-updates-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/io-pgtable-arm: Make allocations NUMA-aware iommu/amd: Prevent possible null pointer dereference and infinite loop iommu/amd: Fix grammar of comments iommu: Clean up the comments for iommu_group_alloc iommu/vt-d: Remove unnecessary parentheses iommu/vt-d: Clean up pasid quirk for pre-production devices iommu/vt-d: Clean up unused variable in find_or_alloc_domain iommu/vt-d: Fix iotlb psi missing for mappings iommu/vt-d: Introduce __mapping_notify_one() iommu: Remove extra NULL check when call strtobool() iommu/amd: Update logging information for new event type iommu/amd: Update the PASID information printed to the system log iommu/tegra: gart: Fix gart_iommu_unmap() iommu/tegra: gart: Add debugging facility iommu/io-pgtable-arm: Use for_each_set_bit to simplify code iommu/qcom: Simplify getting .drvdata iommu: Remove depends on HAS_DMA in case of platform dependency iommu/vt-d: Ratelimit each dmar fault printing
2018-06-07Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-06irq_remapping: Use apic_ack_irq()Thomas Gleixner4-9/+2
To address the EBUSY fail of interrupt affinity settings in case that the previous setting has not been cleaned up yet, use the new apic_ack_irq() function instead of the special ir_ack_apic_edge() implementation which is merily a wrapper around ack_APIC_irq(). Preparatory change for the real fix Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <liu.song.a23@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis <mike.travis@hpe.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tariq Toukan <tariqt@mellanox.com> Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+1
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-05-29Merge branches 'arm/io-pgtable', 'arm/qcom', 'arm/tegra', 'x86/vt-d', ↵Joerg Roedel11-115/+122
'x86/amd' and 'core' into next
2018-05-29iommu/io-pgtable-arm: Make allocations NUMA-awareRobin Murphy1-4/+9
We would generally expect pagetables to be read by the IOMMU more than written by the CPU, so in NUMA systems it makes sense to locate them close to the former and avoid cross-node pagetable walks if at all possible. As it turns out, we already have a handle on the IOMMU device for the sake of coherency management, so it's trivial to grab the appropriate NUMA node when allocating new pagetable pages. Note that we drop the semantics of alloc_pages_exact(), but that's fine since they have never been necessary: the only time we're allocating more than one page is for stage 2 top-level concatenation, but since that is based on the number of IPA bits, the size is always some exact power of two anyway. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/amd: Prevent possible null pointer dereference and infinite loopAnna-Maria Gleixner1-12/+10
The check for !dev_data->domain in __detach_device() emits a warning and returns. The calling code in detach_device() dereferences dev_data->domain afterwards unconditionally, so in case that dev_data->domain is NULL the warning will be immediately followed by a NULL pointer dereference. The calling code in cleanup_domain() loops infinite when !dev_data->domain and the check in __detach_device() returns immediately because dev_list is not changed. do_detach() duplicates this check without throwing a warning. Move the check with the explanation of the do_detach() code into the caller detach_device() and return immediately. Throw an error, when hitting the condition in cleanup_domain(). Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/amd: Fix grammar of commentsAnna-Maria Gleixner1-4/+4
Suggested-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu: Clean up the comments for iommu_group_allocLu Baolu1-1/+0
@name parameter has been removed. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/vt-d: Remove unnecessary parenthesesLu Baolu1-1/+1
Remove unnecessary parentheses to comply with preferred coding style. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/vt-d: Clean up pasid quirk for pre-production devicesLu Baolu1-30/+2
The pasid28 quirk is needed only for some pre-production devices. Remove it to make the code concise. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/vt-d: Clean up unused variable in find_or_alloc_domainLu Baolu1-3/+1
Remove it to make the code more concise. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/vt-d: Fix iotlb psi missing for mappingsPeter Xu1-9/+34
When caching mode is enabled for IOMMU, we should send explicit IOTLB PSIs even for newly created mappings. However these events are missing for all intel_iommu_map() callers, e.g., iommu_map(). One direct user is the vfio-pci driver. To make sure we'll send the PSIs always when necessary, this patch firstly introduced domain_mapping() helper for page mappings, then fixed the problem by generalizing the explicit map IOTLB PSI logic into that new helper. With that, we let iommu_domain_identity_map() to use the simplified version to avoid sending the notifications, while for all the rest of cases we send the notifications always. For VM case, we send the PSIs to all the backend IOMMUs for the domain. This patch allows the nested device assignment to work with QEMU (assign device firstly to L1 guest, then assign it again to L2 guest). Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu/vt-d: Introduce __mapping_notify_one()Peter Xu1-12/+14
Introduce this new helper to notify one newly created mapping on one single IOMMU. We can further leverage this helper in the next patch. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15iommu: Remove extra NULL check when call strtobool()Andy Shevchenko1-2/+4
strtobool() does check for NULL parameter already. No need to repeat. While here, switch to kstrtobool() and unshadow actual error code (which is still -EINVAL). No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-10PCI: Add "pci=noats" boot parameterGil Kupfer2-4/+10
Adds a "pci=noats" boot parameter. When supplied, all ATS related functions fail immediately and the IOMMU is configured to not use device-IOTLB. Any function that checks for ATS capabilities directly against the devices should also check this flag. Currently, such functions exist only in IOMMU drivers, and they are covered by this patch. The motivation behind this patch is the existence of malicious devices. Lots of research has been done about how to use the IOMMU as protection from such devices. When ATS is supported, any I/O device can access any physical address by faking device-IOTLB entries. Adding the ability to ignore these entries lets sysadmins enhance system security. Signed-off-by: Gil Kupfer <gilkup@cs.technion.ac.il> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-05-09dma-mapping: move the NEED_DMA_MAP_STATE config symbol to lib/KconfigChristoph Hellwig1-0/+1
This way we have one central definition of it, and user can select it as needed. Note that we now also always select it when CONFIG_DMA_API_DEBUG is select, which fixes some incorrect checks in a few network drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2018-05-03iommu: rockchip: fix building without CONFIG_OFArnd Bergmann1-1/+1
We get a build error when compiling the iommu driver without CONFIG_OF: drivers/iommu/rockchip-iommu.c: In function 'rk_iommu_of_xlate': drivers/iommu/rockchip-iommu.c:1101:2: error: implicit declaration of function 'of_dev_put'; did you mean 'of_node_put'? [-Werror=implicit-function-declaration] This replaces the of_dev_put() with the equivalent platform_device_put(). Fixes: 5fd577c3eac3 ("iommu/rockchip: Use OF_IOMMU to attach devices automatically") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/amd: Update logging information for new event typeGary R Hook2-1/+10
A new events have been defined in the AMD IOMMU spec: 0x09 - "invalid PPR request" Add support for logging this type of event. Signed-off-by: Gary R Hook <gary.hook@amd.com> ~ ~ ~ Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/amd: Update the PASID information printed to the system logGary R Hook1-18/+13
Provide detailed data for each event, as appropriate. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb()Joerg Roedel1-1/+1
A misaligned address is only worth a warning, and not stopping the while execution path with a BUG_ON(). Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/vt-d: fix shift-out-of-bounds in bug checkingChangbin Du1-1/+1
It allows to flush more than 4GB of device TLBs. So the mask should be 64bit wide. UBSAN captured this fault as below. [ 3.760024] ================================================================================ [ 3.768440] UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1348:3 [ 3.774864] shift exponent 64 is too large for 32-bit type 'int' [ 3.780853] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 4.17.0-rc1+ #89 [ 3.788661] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 3.796034] Call Trace: [ 3.798472] <IRQ> [ 3.800479] dump_stack+0x90/0xfb [ 3.803787] ubsan_epilogue+0x9/0x40 [ 3.807353] __ubsan_handle_shift_out_of_bounds+0x10e/0x170 [ 3.812916] ? qi_flush_dev_iotlb+0x124/0x180 [ 3.817261] qi_flush_dev_iotlb+0x124/0x180 [ 3.821437] iommu_flush_dev_iotlb+0x94/0xf0 [ 3.825698] iommu_flush_iova+0x10b/0x1c0 [ 3.829699] ? fq_ring_free+0x1d0/0x1d0 [ 3.833527] iova_domain_flush+0x25/0x40 [ 3.837448] fq_flush_timeout+0x55/0x160 [ 3.841368] ? fq_ring_free+0x1d0/0x1d0 [ 3.845200] ? fq_ring_free+0x1d0/0x1d0 [ 3.849034] call_timer_fn+0xbe/0x310 [ 3.852696] ? fq_ring_free+0x1d0/0x1d0 [ 3.856530] run_timer_softirq+0x223/0x6e0 [ 3.860625] ? sched_clock+0x5/0x10 [ 3.864108] ? sched_clock+0x5/0x10 [ 3.867594] __do_softirq+0x1b5/0x6f5 [ 3.871250] irq_exit+0xd4/0x130 [ 3.874470] smp_apic_timer_interrupt+0xb8/0x2f0 [ 3.879075] apic_timer_interrupt+0xf/0x20 [ 3.883159] </IRQ> [ 3.885255] RIP: 0010:poll_idle+0x60/0xe7 [ 3.889252] RSP: 0018:ffffb1b201943e30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 3.896802] RAX: 0000000080200000 RBX: 000000000000008e RCX: 000000000000001f [ 3.903918] RDX: 0000000000000000 RSI: 000000002819aa06 RDI: 0000000000000000 [ 3.911031] RBP: ffff9e93c6b33280 R08: 00000010f717d567 R09: 000000000010d205 [ 3.918146] R10: ffffb1b201943df8 R11: 0000000000000001 R12: 00000000e01b169d [ 3.925260] R13: 0000000000000000 R14: ffffffffb12aa400 R15: 0000000000000000 [ 3.932382] cpuidle_enter_state+0xb4/0x470 [ 3.936558] do_idle+0x222/0x310 [ 3.939779] cpu_startup_entry+0x78/0x90 [ 3.943693] start_secondary+0x205/0x2e0 [ 3.947607] secondary_startup_64+0xa5/0xb0 [ 3.951783] ================================================================================ Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/dma: Move PCI window region reservation back into dma specific path.Shameer Kolothum1-29/+25
This pretty much reverts commit 273df9635385 ("iommu/dma: Make PCI window reservation generic") by moving the PCI window region reservation back into the dma specific path so that these regions doesn't get exposed via the IOMMU API interface. With this change, the vfio interface will report only iommu specific reserved regions to the user space. Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Fixes: 273df9635385 ('iommu/dma: Make PCI window reservation generic') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/rockchip: Make clock handling optionalHeiko Stuebner1-1/+8
iommu clocks are optional, so the driver should not fail if they are not present. Instead just set the number of clocks to 0, which the clk-blk APIs can handle just fine. Fixes: f2e3a5f557ad ("iommu/rockchip: Control clocks needed to access the IOMMU") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/amd: Hide unused iommu_table_lockArnd Bergmann1-1/+1
The newly introduced lock is only used when CONFIG_IRQ_REMAP is enabled: drivers/iommu/amd_iommu.c:86:24: error: 'iommu_table_lock' defined but not used [-Werror=unused-variable] static DEFINE_SPINLOCK(iommu_table_lock); This moves the definition next to the user, within the #ifdef protected section of the file. Fixes: ea6166f4b83e ("iommu/amd: Split irq_lookup_table out of the amd_iommu_devtable_lock") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()Jagannathan Raman1-1/+1
It was noticed that the IRTE configured for guest OS kernel was over-written while the guest was running. As a result, vt-d Posted Interrupts configured for the guest are not being delivered directly, and instead bounces off the host. Every interrupt delivery takes a VM Exit. It was noticed that the following stack is doing the over-write: [ 147.463177] modify_irte+0x171/0x1f0 [ 147.463405] intel_ir_set_affinity+0x5c/0x80 [ 147.463641] msi_domain_set_affinity+0x32/0x90 [ 147.463881] irq_do_set_affinity+0x37/0xd0 [ 147.464125] irq_set_affinity_locked+0x9d/0xb0 [ 147.464374] __irq_set_affinity+0x42/0x70 [ 147.464627] write_irq_affinity.isra.5+0xe1/0x110 [ 147.464895] proc_reg_write+0x38/0x70 [ 147.465150] __vfs_write+0x36/0x180 [ 147.465408] ? handle_mm_fault+0xdf/0x200 [ 147.465671] ? _cond_resched+0x15/0x30 [ 147.465936] vfs_write+0xad/0x1a0 [ 147.466204] SyS_write+0x52/0xc0 [ 147.466472] do_syscall_64+0x74/0x1a0 [ 147.466744] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 reversing the sense of force check in intel_ir_reconfigure_irte() restores proper posted interrupt functionality Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Fixes: d491bdff888e ('iommu/vt-d: Reevaluate vector configuration on activate()') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/tegra: gart: Fix gart_iommu_unmap()Dmitry Osipenko1-1/+1
It must return the number of unmapped bytes on success, returning 0 means that unmapping failed and in result only one page is unmapped. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/tegra: gart: Add debugging facilityDmitry Osipenko1-0/+13
Page mapping could overwritten by an accident (a bug). We can catch this case by checking 'VALID' bit of GART's page entry prior to mapping of a page. Since that check introduces a small performance impact, it should be enabled explicitly using new GART's kernel module 'debug' parameter. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/io-pgtable-arm: Use for_each_set_bit to simplify codeYueHaibing2-8/+2
We can use for_each_set_bit() to simplify code slightly in the ARM io-pgtable self tests while unmapping. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/qcom: Simplify getting .drvdataWolfram Sang1-4/+2
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven1-3/+2
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-03iommu/vt-d: Ratelimit each dmar fault printingDmitry Safonov1-5/+3
There is a ratelimit for printing, but it's incremented each time the cpu recives dmar fault interrupt. While one interrupt may signal about *many* faults. So, measuring the impact it turns out that reading/clearing one fault takes < 1 usec, and printing info about the fault takes ~170 msec. Having in mind that maximum number of fault recording registers per remapping hardware unit is 256.. IRQ handler may run for (170*256) msec. And as fault-serving loop runs without a time limit, during servicing new faults may occur.. Ratelimit each fault printing rather than each irq printing. Fixes: commit c43fce4eebae ("iommu/vt-d: Ratelimit fault handler") BUG: spinlock lockup suspected on CPU#0, CliShell/9903 lock: 0xffffffff81a47440, .magic: dead4ead, .owner: kworker/u16:2/8915, .owner_cpu: 6 CPU: 0 PID: 9903 Comm: CliShell Call Trace:$\n' [..] dump_stack+0x65/0x83$\n' [..] spin_dump+0x8f/0x94$\n' [..] do_raw_spin_lock+0x123/0x170$\n' [..] _raw_spin_lock_irqsave+0x32/0x3a$\n' [..] uart_chars_in_buffer+0x20/0x4d$\n' [..] tty_chars_in_buffer+0x18/0x1d$\n' [..] n_tty_poll+0x1cb/0x1f2$\n' [..] tty_poll+0x5e/0x76$\n' [..] do_select+0x363/0x629$\n' [..] compat_core_sys_select+0x19e/0x239$\n' [..] compat_SyS_select+0x98/0xc0$\n' [..] sysenter_dispatch+0x7/0x25$\n' [..] NMI backtrace for cpu 6 CPU: 6 PID: 8915 Comm: kworker/u16:2 Workqueue: dmar_fault dmar_fault_work Call Trace:$\n' [..] wait_for_xmitr+0x26/0x8f$\n' [..] serial8250_console_putchar+0x1c/0x2c$\n' [..] uart_console_write+0x40/0x4b$\n' [..] serial8250_console_write+0xe6/0x13f$\n' [..] call_console_drivers.constprop.13+0xce/0x103$\n' [..] console_unlock+0x1f8/0x39b$\n' [..] vprintk_emit+0x39e/0x3e6$\n' [..] printk+0x4d/0x4f$\n' [..] dmar_fault+0x1a8/0x1fc$\n' [..] dmar_fault_work+0x15/0x17$\n' [..] process_one_work+0x1e8/0x3a9$\n' [..] worker_thread+0x25d/0x345$\n' [..] kthread+0xea/0xf2$\n' [..] ret_from_fork+0x58/0x90$\n' Cc: Alex Williamson <alex.williamson@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-04-11Merge tag 'iommu-updates-v4.17' of ↵Linus Torvalds18-834/+868
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - OF_IOMMU support for the Rockchip iommu driver so that it can use generic DT bindings - rework of locking in the AMD IOMMU interrupt remapping code to make it work better in RT kernels - support for improved iotlb flushing in the AMD IOMMU driver - support for 52-bit physical and virtual addressing in the ARM-SMMU - various other small fixes and cleanups * tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits) iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t iommu/rockchip: Support sharing IOMMU between masters iommu/rockchip: Add runtime PM support iommu/rockchip: Fix error handling in init iommu/rockchip: Use OF_IOMMU to attach devices automatically iommu/rockchip: Use IOMMU device for dma mapping operations dt-bindings: iommu/rockchip: Add clock property iommu/rockchip: Control clocks needed to access the IOMMU iommu/rockchip: Fix TLB flush of secondary IOMMUs iommu/rockchip: Use iopoll helpers to wait for hardware iommu/rockchip: Fix error handling in attach iommu/rockchip: Request irqs in rk_iommu_probe() iommu/rockchip: Fix error handling in probe iommu/rockchip: Prohibit unbind and remove iommu/amd: Return proper error code in irq_remapping_alloc() iommu/amd: Make amd_iommu_devtable_lock a spin_lock iommu/amd: Drop the lock while allocating new irq remap table iommu/amd: Factor out setting the remap table for a devid iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga() iommu/amd: Remove the special case from alloc_irq_table() ...
2018-04-05headers: untangle kmemleak.h from mm.hRandy Dunlap2-1/+1
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-02Merge branch 'x86-dma-for-linus' of ↵Linus Torvalds3-97/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 dma mapping updates from Ingo Molnar: "This tree, by Christoph Hellwig, switches over the x86 architecture to the generic dma-direct and swiotlb code, and also unifies more of the dma-direct code between architectures. The now unused x86-only primitives are removed" * 'x86-dma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrs swiotlb: Make swiotlb_{alloc,free}_buffer depend on CONFIG_DMA_DIRECT_OPS dma/swiotlb: Remove swiotlb_{alloc,free}_coherent() dma/direct: Handle force decryption for DMA coherent buffers in common code dma/direct: Handle the memory encryption bit in common code dma/swiotlb: Remove swiotlb_set_mem_attributes() set_memory.h: Provide set_memory_{en,de}crypted() stubs x86/dma: Remove dma_alloc_coherent_gfp_flags() iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent() iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}() x86/dma/amd_gart: Use dma_direct_{alloc,free}() x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA x86/dma: Use generic swiotlb_ops x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y) x86/dma: Remove dma_alloc_coherent_mask()
2018-04-02Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Ingo Molnar: "The main x86 APIC/IOAPIC changes in this cycle were: - Robustify kexec support to more carefully restore IRQ hardware state before calling into kexec/kdump kernels. (Baoquan He) - Clean up the local APIC code a bit (Dou Liyang) - Remove unused callbacks (David Rientjes)" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Finish removing unused callbacks x86/apic: Drop logical_smp_processor_id() inline x86/apic: Modernize the pending interrupt code x86/apic: Move pending interrupt check code into it's own function x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified x86/apic: Rename variables and functions related to x86_io_apic_ops x86/apic: Remove the (now) unused disable_IO_APIC() function x86/apic: Fix restoring boot IRQ mode in reboot and kexec/kdump x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=y x86/apic: Split out restore_boot_irq_mode() from disable_IO_APIC() x86/apic: Make setup_local_APIC() static x86/apic: Simplify init_bsp_APIC() usage x86/x2apic: Mark set_x2apic_phys_mode() as __init
2018-03-29Merge branches 'x86/amd', 'x86/vt-d', 'arm/rockchip', 'arm/omap', ↵Joerg Roedel16-699/+679
'arm/mediatek', 'arm/exynos', 'arm/renesas', 'arm/smmu' and 'core' into next
2018-03-29iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_tRobin Murphy1-1/+1
It's not entirely unreasonable for io-pgtable-arm to be built for configurations with 32-bit phys_addr_t, where the compiler rightly raises a warning about the 36-bit shift. That particular code path should never actually *run* on those systems, but we still want it to compile cleanly, which is easily done by using an unambiguous u64 as the intermediate type instead. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29iommu/rockchip: Support sharing IOMMU between mastersJeffy Chen1-2/+20
There would be some masters sharing the same IOMMU device. Put them in the same iommu group and share the same iommu domain. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29iommu/rockchip: Add runtime PM supportJeffy Chen1-52/+129
When the power domain is powered off, the IOMMU cannot be accessed and register programming must be deferred until the power domain becomes enabled. Add runtime PM support, and use runtime PM device link from IOMMU to master to enable and disable IOMMU. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29iommu/rockchip: Fix error handling in initJeffy Chen1-13/+2
It's hard to undo bus_set_iommu() in the error path, so move it to the end of rk_iommu_probe(). Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29iommu/rockchip: Use OF_IOMMU to attach devices automaticallyJeffy Chen1-95/+40
Converts the rockchip-iommu driver to use the OF_IOMMU infrastructure, which allows attaching master devices to their IOMMUs automatically according to DT properties. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 23:42:40 +0000