summaryrefslogtreecommitdiffstats
path: root/drivers/char/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-11/+11
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-28powerpc: Remove Xilinx PPC405/PPC440 supportMichal Simek1-1/+1
The latest Xilinx design tools called ISE and EDK has been released in October 2013. New tool doesn't support any PPC405/PPC440 new designs. These platforms are no longer supported and tested. PowerPC 405/440 port is orphan from 2013 by commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership") that's why it is time to remove the support fot these platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
2020-04-05Merge tag 'random_for_linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random updates from Ted Ts'o: - Improve getrandom and /dev/random's support for those arm64 architecture variants that have RNG instructions. - Use batched output from CRNG instead of CPU's RNG instructions for better performance. - Miscellaneous bug fixes. * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: avoid warnings for !CONFIG_NUMA builds random: fix data races at timer_rand_state random: always use batched entropy for get_random_u{32,64} random: Make RANDOM_TRUST_CPU depend on ARCH_RANDOM arm64: add credited/trusted RNG support random: add arch_get_random_*long_early() random: split primary/secondary crng init paths
2020-03-19rtc/alpha: remove legacy rtc driverArnd Bergmann1-56/+0
The old drivers/char/rtc.c driver was originally the implementation for x86 PCs but got subsequently replaced by the rtc class driver on all architectures except alpha. Move alpha over to the portable driver and remove the old one for good. The CONFIG_JS_RTC option was only ever used on SPARC32 but has not been available for many years, this was used to build the same rtc driver with a different module name. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200226224322.187960-2-alexandre.belloni@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19rtc/ia64: remove legacy efirtc driverArnd Bergmann1-4/+0
There are two EFI RTC drivers, the original drivers/char/efirtc.c driver and the more modern drivers/rtc/rtc-efi.c. Both implement the same interface, but the new one does so in a more portable way. Move everything over to that one and remove the old one. Cc: linux-ia64@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200226224322.187960-1-alexandre.belloni@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12tty: source all tty Kconfig files in one placeRandy Dunlap1-5/+0
'source' (include) all of the tty/*/Kconfig files from drivers/tty/Kconfig instead of from drivers/char/Kconfig. This consolidates them both in source code and in menu presentation to the user. Move hvc/Kconfig and serial/Kconfig 'source' lines into the if TTY/endif block and remove the if TTY/endif blocks from those 2 files. Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Jiri Slaby <jslaby@suse.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200311225736.32147-3-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12char: group dev configs togtherRandy Dunlap1-50/+50
Group /dev/{mem,kmem,nvram,raw,port} driver configs together. This also means that tty configs are now grouped together instead of being split up. This just moves Kconfig lines around. There are no other changes. Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200311225736.32147-2-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-27random: Make RANDOM_TRUST_CPU depend on ARCH_RANDOMRichard Henderson1-1/+1
Listing the set of host architectures does not scale. Depend instead on the existence of the architecture rng. This will allow RANDOM_TRUST_CPU to be selected on arm64. Today ARCH_RANDOM is only selected by x86, s390, and powerpc, so this does not adversely affect other architectures. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200210130015.17664-5-mark.rutland@arm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-20char: Fix Kconfig indentationKrzysztof Kozlowski1-3/+3
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120134247.16073-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of ↵Linus Torvalds1-22/+0
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-08-23fdt: add support for rng-seedHsin-Yi Wang1-0/+9
Introducing a chosen node, rng-seed, which is an entropy that can be passed to kernel called very early to increase initial device randomness. Bootloader should provide this entropy and the value is read from /chosen/rng-seed in DT. Obtain of_fdt_crc32 for CRC check after early_init_dt_scan_nodes(), since early_init_dt_scan_chosen() would modify fdt to erase rng-seed. Add a new interface add_bootloader_randomness() for rng-seed use case. Depends on whether the seed is trustworthy, rng seed would be passed to add_hwgenerator_randomness(). Otherwise it would be passed to add_device_randomness(). Decision is controlled by kernel config RANDOM_TRUST_BOOTLOADER. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> # drivers/char/random.c Signed-off-by: Will Deacon <will@kernel.org>
2019-08-16char: remove the SGI tiocx/mbcs driverChristoph Hellwig1-14/+0
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-3-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16char: remove the SGI snsc driverChristoph Hellwig1-8/+0
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-2-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-07-15docs: admin-guide: add a series of orphaned documentsMauro Carvalho Chehab1-2/+2
There are lots of documents that belong to the admin-guide but are on random places (most under Documentation root dir). Move them to the admin guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-07-15docs: admin-guide: add laptops documentationMauro Carvalho Chehab1-1/+1
The docs under Documentation/laptops contain users specific information. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-07-15docs: laptops: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the laptops documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-04-05tty: mark Siemens R3964 line discipline as BROKENGreg Kroah-Hartman1-1/+1
The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-22powerpc: Enable HAVE_ARCH_NVRAM_OPS and disable GENERIC_NVRAMFinn Thain1-10/+9
Switch PPC32 kernels from the generic_nvram module to the nvram module. Also fix a theoretical bug where CHRP omits the chrp_nvram_init() call when CONFIG_NVRAM_MODULE=m. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Implement arch_nvram_ops methods and enable ↵Finn Thain1-1/+2
CONFIG_HAVE_ARCH_NVRAM_OPS Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22scsi/atari_scsi: Don't select CONFIG_NVRAMFinn Thain1-4/+1
On powerpc, setting CONFIG_NVRAM=n builds a kernel with no NVRAM support. Setting CONFIG_NVRAM=m enables the /dev/nvram misc device module without enabling NVRAM support in drivers. Setting CONFIG_NVRAM=y enables the misc device (built-in) and also enables NVRAM support in drivers. m68k shares the valkyriefb driver with powerpc, and since that driver uses NVRAM, it is affected by CONFIG_ATARI_SCSI, because of the use of "select NVRAM". We can avoid the "select" here, but drivers still have to interpret the CONFIG_NVRAM symbol consistently regardless of platform. In this patch and the subsequent fbdev driver patch, the convention is adopted across all relevant platforms whereby NVRAM functionality gets enabled in a given device driver when the nvram misc device is built-in or when both drivers are modules. Acked-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09ttyprintk: make the printk log level configurablePeter Korsgaard1-0/+8
For some use cases it is handy to use a different printk log level than the default (info) for the messages written to ttyprintk, so add a Kconfig option similar to what we have for default console loglevel. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-27Merge tag 'rtc-4.20' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "This cycle, there were mostly non urgent fixes in drivers. I also finally unexported the non managed registration. Subsystem: - non devm managed registration is now removed from the driver API - all the unnecessary rtc_valid_tm() calls have been removed Drivers: - abx80X: watchdog support - cmos: fix non ACPI support - sc27xx: fix alarm support - Remove a possible sysfs race condition for ab8500, ds1307, ds1685, isl1208 - Fix a possible race condition where an irq handler may be called before the rtc_device struct is allocated for mt6397, pl030, menelaus, armada38x" * tag 'rtc-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: sc27xx: Always read normal alarm when registering RTC device rtc: sc27xx: Add check to see if need to enable the alarm interrupt rtc: sc27xx: Remove interrupts disable and clear in probe() rtc: sc27xx: Clear SPG value update interrupt status rtc: sc27xx: Set wakeup capability before registering rtc device rtc: s35390a: Change buf's type to u8 in s35390a_init rtc: ds1307: fix ds1339 wakealarm support rtc: ds1685: simplify getting .driver_data rtc: m41t80: mark expected switch fall-through rtc: tegra: Propagate errors from platform_get_irq() rtc: cmos: Remove the `use_acpi_alarm' module parameter for !ACPI rtc: cmos: Fix non-ACPI undefined reference to `hpet_rtc_interrupt' rtc: mv: let the core handle invalid alarms rtc: vr41xx: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: ab8500: remove useless check rtc: ab8500: let the core handle range rtc: ab8500: use rtc_add_group rtc: rs5c348: report error when time is invalid rtc: rs5c348: remove forward declaration rtc: rs5c348: remove useless label ...
2018-09-08rtc: mips: default to rtc-cmos on mipsArnd Bergmann1-1/+1
The old rtc driver is getting in the way of some compat_ioctl simplification. Looking up the loongson64 git history, it seems that everyone uses the more modern but compatible RTC_CMOS driver anyway, so let's remove the special case for loongson64. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-01random: make CPU trust a boot parameterKees Cook1-2/+2
Instead of forcing a distro or other system builder to choose at build time whether the CPU is trusted for CRNG seeding via CONFIG_RANDOM_TRUST_CPU, provide a boot-time parameter for end users to control the choice. The CONFIG will set the default state instead. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-24random: add a config option to trust the CPU's hwrngTheodore Ts'o1-0/+14
This gives the user building their own kernel (or a Linux distribution) the option of deciding whether or not to trust the CPU's hardware random number generator (e.g., RDRAND for x86 CPU's) as being correctly implemented and not having a back door introduced (perhaps courtesy of a Nation State's law enforcement or intelligence agencies). This will prevent getrandom(2) from blocking, if there is a willingness to trust the CPU manufacturer. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab1-1/+1
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-05char: sparc64: Add privileged ADI driverTom Hromatka1-0/+12
SPARC M7 and newer processors utilize ADI to version and protect memory. This driver is capable of reading/writing ADI/MCD versions from privileged user space processes. Addresses in the adi file are mapped linearly to physical memory at a ratio of 1:adi_blksz. Thus, a read (or write) of offset K in the file operates upon the ADI version at physical address K * adi_blksz. The version information is encoded as one version per byte. Intended consumers are makedumpfile and crash. Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04Merge tag 'char-misc-4.17-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ...
2018-03-26char: remove blackfin OTP driverArnd Bergmann1-28/+0
The blackfin architecture is getting removed, so we don't need this driver any more. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26char: remove tile-srom.cArnd Bergmann1-11/+0
The tile architecture is being removed, so we no longer need this driver. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26char: remove obsolete ds1302 rtc driverArnd Bergmann1-9/+0
The m32r architecture was the only user of the old-style rtc driver for ds1302. The architecture is getting removed now, and we have a modern driver for the same hardware in drivers/rtc/rtc-ds1302.c, so this one won't be missed. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-15char: nvram: disable on ARMAlexandre Belloni1-1/+1
/dev/nvram was never meant to be used alongside the RTC CMOS driver from drivers/rtc as it already expose the NVRAM through another interface.. Anyway, the last defconfig to enable it properly was removed in 2010 so prevent ARM users from selecting it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24x86/lguest: Remove lguest supportJuergen Gross1-1/+1
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
2017-06-20drivers/char: kmem: disable on arm64Ard Biesheuvel1-0/+2
As it turns out, arm64 deviates from other architectures in the way it maps the VMALLOC region: on most (all?) other architectures, it resides strictly above the kernel's direct mapping of DRAM, but on arm64, this is the other way around. For instance, for a 48-bit VA configuration, we have modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) ... vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) 0xffff7e0000000000 - 0xffff7e0003ff0000 ( 63 MB actual) memory : 0xffff800000000000 - 0xffff8000ffc00000 ( 4092 MB) This has mostly gone unnoticed until now, but it does appear that it breaks an assumption in the kmem read/write code, which does something like if (p < (unsigned long) high_memory) { ... use straight copy_[to|from]_user() using p as virtual address ... } ... if (count > 0) { ... use vread/vwrite for accesses past high_memory ... } The first condition will inadvertently hold for the VMALLOC region if VMALLOC_START < PAGE_OFFSET [which is the case on arm64], but the read or write will subsequently fail the virt_addr_valid() check, resulting in a -ENXIO return value. Given how kmem seems to be living in borrowed time anyway, and given the fact that nobody noticed that the read/write interface is broken on arm64 in the first place, let's not bother trying to fix it, but simply disable the /dev/kmem interface entirely for arm64. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-05-26mmtimer: Remove the SGI SN2 mmtimer driverChristoph Hellwig1-9/+0
This driver supports direct system clock access on the ancient SGI SN2 IA64 systems, and implement the only non-builtin k_clock instance. Remove it as any remaining IA64 altix user will be running just as old distros anyway. Dimitri Sivanich stated: "Since this is SN2 specific, this can be removed." Note that this does not affect the never uv_mmtimer driver for x86-based Altix systems. [ tglx: Added comment to CLOCK_SGI_CYCLE ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Travis <mike.travis@hpe.com> Cc: Dimitri Sivanich <sivanich@hpe.com> Link: http://lkml.kernel.org/r/20170526090311.3377-2-hch@lst.de
2017-02-22Merge tag 'tty-4.11-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver patchset for 4.11-rc1. Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer). The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.) All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits) tty: pl011: Work around QDF2400 E44 stuck BUSY bit atmel_serial: Use the fractional divider when possible tty: Remove extra include in HVC console tty framework serial: exar: Enable MSI support serial: exar: Move register defines from uapi header to consumer site serial: pci: Remove unused pci_boards entries serial: exar: Move Commtech adapters to 8250_exar as well serial: exar: Fix feature control register constants serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix mapping of port I/O resources serial: sh-sci: fix hardware RX trigger level setting tty/serial: atmel: ensure state is restored after suspending serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt serdev: ttyport: check whether tty_init_dev() fails serial: 8250_pci: make pciserial_detach_ports() static ARM: dts: STiH410-b2260: Enable HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH410-b2260: Identify the UART RTS line dt-bindings: serial: Update 'uart-has-rtscts' description ...
2017-02-03serdev: Introduce new bus for serial attached devicesRob Herring1-0/+1
The serdev bus is designed for devices such as Bluetooth, WiFi, GPS and NFC connected to UARTs on host processors. Tradionally these have been handled with tty line disciplines, rfkill, and userspace glue such as hciattach. This approach has many drawbacks since it doesn't fit into the Linux driver model. Handling of sideband signals, power control and firmware loading are the main issues. This creates a serdev bus with controllers (i.e. host serial ports) and attached devices. Typically, these are point to point connections, but some devices have muxing protocols or a h/w mux is conceivable. Any muxing is not yet supported with the serdev bus. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: Sebastian Reichel <sre@kernel.org> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11char: lack of bool string made CONFIG_DEVPORT always onMax Bires1-1/+4
Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by: Max Bires <jbires@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-11-16posix-timers: Make them configurableNicolas Pitre1-0/+1
Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-10tile-srom: allow the driver to be built as a moduleChris Metcalf1-1/+1
The code was already configured that way, but the Kconfig file didn't support requesting it. A buglet caused a null pointer deref when unloading the module, but this commit also corrects that issue. Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28Move CONFIG_DEVKMEM default to nDave Young1-1/+0
Kconfig comment suggests setting it as "n" if in doubt thus move the default value to 'n'. Signed-off-by: Dave Young <dyoung@redhat.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds1-27/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-06-29powerpc/powernv: Add driver for operator panel on FSP machinesSuraj Jitindar Singh1-0/+14
Implement new character device driver to allow access from user space to the operator panel display present on IBM Power Systems machines with FSPs. This will allow status information to be presented on the display which is visible to a user. The driver implements a character buffer which a user can read/write by accessing the device (/dev/op_panel). This buffer is then displayed on the operator panel display. Any attempt to write past the last character position will have no effect and attempts to write more characters than the size of the display will be truncated. The device may only be accessed by a single process at a time. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26mn10300: use RTC_DRV_CMOS instead of CONFIG_RTCArnd Bergmann1-1/+1
nn10300 has a dependency on mc146818_get_time/mc146818_set_time, which we want to move from the mc146818rtc.h header into the rtc subsystem, which in turn is not usable on mn10300. This changes mn10300 to use the modern rtc-cmos driver instead of the old RTC driver, and that in turn lets us completely remove the read_persistent_clock/update_persistent_clock callbacks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04char/genrtc: remove the rest of the driverArnd Bergmann1-26/+0
No architecture uses the genrtc driver any more, so let's kill it off for good. This now also includes asm-generic/rtc.h, which is otherwise completely unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04char/genrtc: remove powerpc supportArnd Bergmann1-2/+2
PowerPC is the last architecture using the GEN_RTC driver on some machines, but we can migrate them all to using the RTC_DRV_GENERIC driver instead now. This moves over the CONFIG_GEN_RTC option from drivers/char into arch/powerpc/platforms/Kconfig and makes it just select the replacement driver instead, for the only reason of not breaking existing defconfig and .config files that users may have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04char/genrtc: remove m68k supportArnd Bergmann1-1/+1
The asm/rtc.h header is only used for the old gen_rtc driver that has been replaced by rtc-generic. According to Geert Uytterhoeven, nobody has used the old driver on m68k for a long time, so we can now just remove the header file and disallow the driver in Kconfig. All files that used to include asm/rtc.h are now changed so they include the headers that were used implicitly through asm/rtc.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>