Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for the new scalable MMU
- Fixes for migration of nested hypervisors on AMD
- Fix for clang integrated assembler
- Fix for left shift by 64 (UBSAN)
- Small cleanups
- Straggler SEV-ES patch
ARM:
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
Misc:
- selftests cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits)
KVM: x86: __kvm_vcpu_halt can be static
KVM: SVM: Add support for booting APs in an SEV-ES guest
KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode
KVM: nSVM: correctly restore nested_run_pending on migration
KVM: x86/mmu: Clarify TDP MMU page list invariants
KVM: x86/mmu: Ensure TDP MMU roots are freed after yield
kvm: check tlbs_dirty directly
KVM: x86: change in pv_eoi_get_pending() to make code more readable
MAINTAINERS: Really update email address for Sean Christopherson
KVM: x86: fix shift out of bounds reported by UBSAN
KVM: selftests: Implement perf_test_util more conventionally
KVM: selftests: Use vm_create_with_vcpus in create_vm
KVM: selftests: Factor out guest mode code
KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c
KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load
KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()
KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array
KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE
KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a small number of bug fixes that all came in before or
during the merge window, most for the omap platform:
- One boot regression fix for Nokia N9 (OMAP3).
- Two small defconfig changes for omap2, to reflect changes in
drivers
- Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs.
The picoxcell platform will be removed in v5.12, but fixing it
first makes it easier to backport to the fix to stable kernels and
get a clean build with new dtc versions"
* tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: picoxcell: fix missing interrupt-parent properties
ARM: dts: ux500/golden: Set display max brightness
arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios"
ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875
ARM: omap2plus_defconfig: enable SPI GPIO
ARM: OMAP2+: omap_device: fix idling of devices during probe
ARM: dts: OMAP3: disable AES on N950/N9
ARM: omap2plus_defconfig: drop unused POWER_AVS option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Clean-ups following the merging window: remove unused variable,
duplicate includes, superfluous barrier, move some inline asm to
separate functions.
- Disable top-byte-ignore on kernel code addresses with KASAN/MTE
enabled (already done when MTE is disabled).
- Fix ARCH_LOW_ADDRESS_LIMIT definition with CONFIG_ZONE_DMA disabled.
- Compiler/linker flags: link with "-z norelno", discard .eh_frame_hdr
instead of --no-eh-frame-hdr.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Move PSTATE.TCO setting to separate functions
arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabled
arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdr
arm64: traps: remove duplicate include statement
arm64: link with -z norelro for LLD or aarch64-elf
arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA
arm64: mte: remove an ISB on kernel exit
arm64/smp: Remove unused irq variable in arch_show_interrupts()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a functional bug in arm/chacha-neon as well as a potential
buffer overflow in ecdh"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
crypto: arm/chacha-neon - add missing counter increment
|
|
dtc points out that the interrupts for some devices are not parsable:
picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent
There are two VIC instances, so it's not clear which one needs to be
used. I found the BSP sources that reference VIC0, so use that:
https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch
Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #1
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
|
|
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.
Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.
First AP boot (first INIT-SIPI-SIPI sequence):
Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
support. It is up to the guest to transfer control of the AP to the
proper location.
Subsequent AP boot:
KVM will expect to receive an AP Reset Hold exit event indicating that
the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
awaken it. When the AP Reset Hold exit event is received, KVM will place
the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
sequence, KVM will make the vCPU runnable. It is again up to the guest
to then transfer control of the AP to the proper location.
To differentiate between an actual HLT and an AP Reset Hold, a new MP
state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
placed in upon receiving the AP Reset Hold exit event. Additionally, to
communicate the AP Reset Hold exit event up to userspace (if needed), a
new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.
A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is possible to exit the nested guest mode, entered by
svm_set_nested_state prior to first vm entry to it (e.g due to pending event)
if the nested run was not pending during the migration.
In this case we must not switch to the nested msr permission bitmap.
Also add a warning to catch similar cases in the future.
Fixes: a7d5c7ce41ac1 ("KVM: nSVM: delay MSR permission processing to first nested VM run")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We overwrite most of vmcb fields while doing so, so we must
mark it as dirty.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The code to store it on the migration exists, but no code was restoring it.
One of the side effects of fixing this is that L1->L2 injected events
are no longer lost when migration happens with nested run pending.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210107093854.882483-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The tdp_mmu_roots and tdp_mmu_pages in struct kvm_arch should only contain
pages with tdp_mmu_page set to true. tdp_mmu_pages should not contain any
pages with a non-zero root_count and tdp_mmu_roots should only contain
pages with a positive root_count, unless a thread holds the MMU lock and
is in the process of modifying the list. Various functions expect these
invariants to be maintained, but they are not explictily documented. Add
to the comments on both fields to document the above invariants.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210107001935.3732070-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Many TDP MMU functions which need to perform some action on all TDP MMU
roots hold a reference on that root so that they can safely drop the MMU
lock in order to yield to other threads. However, when releasing the
reference on the root, there is a bug: the root will not be freed even
if its reference count (root_count) is reduced to 0.
To simplify acquiring and releasing references on TDP MMU root pages, and
to ensure that these roots are properly freed, move the get/put operations
into another TDP MMU root iterator macro.
Moving the get/put operations into an iterator macro also helps
simplify control flow when a root does need to be freed. Note that using
the list_for_each_entry_safe macro would not have been appropriate in
this situation because it could keep a pointer to the next root across
an MMU lock release + reacquire, during which time that root could be
freed.
Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU")
Fixes: 063afacd8730 ("kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU")
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210107001935.3732070-1-bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Message-Id: <1608277897-1932-1-git-send-email-stephenzhangzsd@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since we know that e >= s, we can reassociate the left shift,
changing the shifted number from 1 to 2 in exchange for
decreasing the right hand side by 1.
Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 16809ecdc1e8a moved __svm_vcpu_run the prototype to svm.h,
but forgot to remove the original from svm.c.
Fixes: 16809ecdc1e8a ("KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20201220200339.65115-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When using LLVM's integrated assembler (LLVM_IAS=1) while building
x86_64_defconfig + CONFIG_KVM=y + CONFIG_KVM_AMD=y, the following build
error occurs:
$ make LLVM=1 LLVM_IAS=1 arch/x86/kvm/svm/sev.o
arch/x86/kvm/svm/sev.c:2004:15: error: too few operands for instruction
asm volatile(__ex("vmsave") : : "a" (__sme_page_pa(sd->save_area)) : "memory");
^
arch/x86/kvm/svm/sev.c:28:17: note: expanded from macro '__ex'
#define __ex(x) __kvm_handle_fault_on_reboot(x)
^
./arch/x86/include/asm/kvm_host.h:1646:10: note: expanded from macro '__kvm_handle_fault_on_reboot'
"666: \n\t" \
^
<inline asm>:2:2: note: instantiated into assembly here
vmsave
^
1 error generated.
This happens because LLVM currently does not support calling vmsave
without the fixed register operand (%rax for 64-bit and %eax for
32-bit). This will be fixed in LLVM 12 but the kernel currently supports
LLVM 10.0.1 and newer so this needs to be handled.
Add the proper register using the _ASM_AX macro, which matches the
vmsave call in vmenter.S.
Fixes: 861377730aa9 ("KVM: SVM: Provide support for SEV-ES vCPU loading")
Link: https://reviews.llvm.org/D93524
Link: https://github.com/ClangBuiltLinux/linux/issues/1216
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Message-Id: <20201219063711.3526947-1-natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fixes to get_mmio_spte, destined to 5.10 stable branch.
|
|
Check only the terminal leaf for a "!PRESENT || MMIO" SPTE when looking
for reserved bits on valid, non-MMIO SPTEs. The get_walk() helpers
terminate their walks if a not-present or MMIO SPTE is encountered, i.e.
the non-terminal SPTEs have already been verified to be regular SPTEs.
This eliminates an extra check-and-branch in a relatively hot loop.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201218003139.2167891-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Bump the size of the sptes array by one and use the raw level of the
SPTE to index into the sptes array. Using the SPTE level directly
improves readability by eliminating the need to reason out why the level
is being adjusted when indexing the array. The array is on the stack
and is not explicitly initialized; bumping its size is nothing more than
a superficial adjustment to the stack frame.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201218003139.2167891-4-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Get the so called "root" level from the low level shadow page table
walkers instead of manually attempting to calculate it higher up the
stack, e.g. in get_mmio_spte(). When KVM is using PAE shadow paging,
the starting level of the walk, from the callers perspective, is not
the CR3 root but rather the PDPTR "root". Checking for reserved bits
from the CR3 root causes get_mmio_spte() to consume uninitialized stack
data due to indexing into sptes[] for a level that was not filled by
get_walk(). This can result in false positives and/or negatives
depending on what garbage happens to be on the stack.
Opportunistically nuke a few extra newlines.
Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU")
Reported-by: Richard Herbert <rherbert@sympatico.ca>
Cc: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201218003139.2167891-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Return -1 from the get_walk() helpers if the shadow walk doesn't fill at
least one spte, which can theoretically happen if the walk hits a
not-present PDPTR. Returning the root level in such a case will cause
get_mmio_spte() to return garbage (uninitialized stack data). In
practice, such a scenario should be impossible as KVM shouldn't get a
reserved-bit page fault with a not-present PDPTR.
Note, using mmu->root_level in get_walk() is wrong for other reasons,
too, but that's now a moot point.
Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU")
Cc: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201218003139.2167891-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For consistency with __uaccess_{disable,enable}_hw_pan(), move the
PSTATE.TCO setting into dedicated __uaccess_{disable,enable}_tco()
functions.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
"Things are quieter on upstreaming front as we are mostly focusing on
ARCv3/ARC64 port.
This contains just build system updates from Masahiro Yamada"
* tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: use $(READELF) instead of hard-coded readelf
ARC: build: remove unneeded extra-y
ARC: build: move symlink creation to arch/arc/Makefile to avoid race
ARC: build: add boot_targets to PHONY
ARC: build: add uImage.lzma to the top-level target
ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
|
|
Commit 49b3cf035edc ("kasan: arm64: set TCR_EL1.TBID1 when enabled") set
the TBID1 bit for the KASAN_SW_TAGS configuration, freeing up 8 bits to
be used by PAC. With in-kernel MTE now in mainline, also set this bit
for the KASAN_HW_TAGS configuration.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
|
|
Currently with ld.lld we emit an empty .eh_frame_hdr section (and a
corresponding program header) into the vDSO. With ld.bfd the section
is not emitted but the program header is, with p_vaddr set to 0. This
can lead to unwinders attempting to interpret the data at whichever
location the program header happens to point to as an unwind info
header. This happens to be mostly harmless as long as the byte at
that location (interpreted as a version number) has a value other
than 1, causing both libgcc and LLVM libunwind to ignore the section
(in libunwind's case, after printing an error message to stderr),
but it could lead to worse problems if the byte happened to be 1 or
the program header points to non-readable memory (e.g. if the empty
section was placed at a page boundary).
Instead of disabling .eh_frame_hdr via --no-eh-frame-hdr (which
also has the downside of being unsupported by older versions of GNU
binutils), disable it by discarding the section, and stop emitting
the program header that points to it.
I understand that we intend to emit valid unwind info for the vDSO
at some point. Once that happens this patch can be reverted.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://linux-review.googlesource.com/id/If745fd9cadcb31b4010acbf5693727fe111b0863
Link: https://lore.kernel.org/r/20201230221954.2007257-1-pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
asm/exception.h is included more than once. Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1609139108-10819-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST") deletes
CONFIG_KVM_ARM_HOST option, it should use CONFIG_KVM instead.
Just remove CONFIG_KVM_ARM_HOST here.
Fixes: d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST")
Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1609760324-92271-1-git-send-email-shannon.zhao@linux.alibaba.com
|
|
With GNU binutils 2.35+, linking with BFD produces warnings for vmlinux:
aarch64-linux-gnu-ld: warning: -z norelro ignored
BFD can produce this warning when the target emulation mode does not
support RELRO program headers, and -z relro or -z norelro is passed.
Alan Modra clarifies:
The default linker emulation for an aarch64-linux ld.bfd is
-maarch64linux, the default for an aarch64-elf linker is
-maarch64elf. They are not equivalent. If you choose -maarch64elf
you get an emulation that doesn't support -z relro.
The ARCH=arm64 kernel prefers -maarch64elf, but may fall back to
-maarch64linux based on the toolchain configuration.
LLD will always create RELRO program header regardless of target
emulation.
To avoid the above warning when linking with BFD, pass -z norelro only
when linking with LLD or with -maarch64linux.
Fixes: 3b92fa7485eb ("arm64: link with -z norelro regardless of CONFIG_RELOCATABLE")
Fixes: 3bbd3db86470 ("arm64: relocatable: fix inconsistencies in linker script and options")
Cc: <stable@vger.kernel.org> # 5.0.x-
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Fāng-ruì Sòng <maskray@google.com>
Link: https://lore.kernel.org/r/20201218002432.788499-1-ndesaulniers@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
KVM_ARM_PMU only existed for the benefit of 32bit ARM hosts,
and makes no sense now that we are 64bit only. Get rid of it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and
!CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The
limit will default to ~0ULL, effectively spanning the whole memory,
which is too high for a configuration that expects low memory to be
capped at 4GB.
Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit
when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour
CONFIG_ZONE_DMA32, or span the entire memory when not enabled.
Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This ISB is unnecessary because we will soon do an ERET.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I69f1ee6bb09b1372dd744a0e01cedaf090c8d448
Link: https://lore.kernel.org/r/20201203073458.2675400-1-pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arch/arm64/kernel/smp.c: In function ‘arch_show_interrupts’:
arch/arm64/kernel/smp.c:808:16: warning: unused variable ‘irq’ [-Wunused-variable]
808 | unsigned int irq = irq_desc_get_irq(ipi_desc[i]);
| ^~~
The removal of the last user forgot to remove the variable.
Fixes: 5089bc51f81f ("arm64/smp: Use irq_desc_kstat_cpu() in arch_show_interrupts()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201215103026.2872532-1-geert+renesas@glider.be
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block
size multiples") refactored the chacha block handling in the glue code in
a way that may result in the counter increment to be omitted when calling
chacha_block_xor_neon() to process a full block. This violates the skcipher
API, which requires that the output IV is suitable for handling more input
as long as the preceding input has been presented in round multiples of the
block size. Also, the same code is exposed via the chacha library interface
whose callers may actually rely on this increment to occur even for final
blocks that are smaller than the chacha block size.
So increment the counter after calling chacha_block_xor_neon().
Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 cleanups from Vasily Gorbik:
"Update defconfigs and sort config select list"
* tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/Kconfig: sort config S390 select list once again
s390: update defconfigs
|
|
Although not a problem right now, it flared up while working
on some other aspects of the code-base. Remove the useless
semicolon.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
...and add comments at the top and bottom.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The __init annotations on hyp_cpu_pm_{init,exit} are obviously incorrect,
and the build system shouts at you if you enable DEBUG_SECTION_MISMATCH.
Nothing really bad happens as we never execute that code outside of the
init context, but we can't label the callers as __int either, as kvm_init
isn't __init itself. Oh well.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201223120854.255347-1-maz@kernel.org
|
|
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone: 1445888 pages used for memmap
[0.033176] Normal zone: 89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone: 1445888 pages used for memmap
[0.026875] Normal zone: 89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit 73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dist->ready setting is pointlessly spread across the two vgic
backends, while it could be consolidated in kvm_vgic_map_resources().
Move it there, and slightly simplify the flows in both backends.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM_ARM_VCPU_INIT ioctl calls kvm_reset_vcpu(), which in turn resets the
PMU with a call to kvm_pmu_vcpu_reset(). The function zeroes the PMU
chained counters bitmap and stops all the counters with a perf event
attached. Because it is called before the VCPU has had the chance to run,
no perf events are in use and none are released.
kvm_arm_pmu_v3_enable(), called by kvm_vcpu_first_run_init() only if the
VCPU has been initialized, also resets the PMU. kvm_pmu_vcpu_reset() in
this case does the exact same thing as the previous call, so remove it.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201201150157.223625-6-alexandru.elisei@arm.com
|
|
vgic_v3_map_resources() returns -EBUSY if the VGIC isn't initialized,
update the comment to kvm_vgic_map_resources() to match what the function
does.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201201150157.223625-5-alexandru.elisei@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Four commits fixing various things in the new C VDSO code
- One fix for a 32-bit VMAP stack bug
- Two minor build fixes
Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer.
* tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too
powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO
powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO
powerpc/vdso: Block R_PPC_REL24 relocations
powerpc/smp: Add __init to init_big_cores()
powerpc/time: Force inlining of get_tb()
powerpc/boot: Fix build of dts/fsl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
kvm_vgic_map_resources() is called when a VCPU if first run and it maps all
the VGIC MMIO regions. To prevent double-initialization, the VGIC uses the
ready variable to keep track of the state of resources and the global KVM
mutex to protect against concurrent accesses. After the lock is taken, the
variable is checked again in case another VCPU took the lock between the
current VCPU reading ready equals false and taking the lock.
The double-checked lock pattern is spread across four different functions:
in kvm_vcpu_first_run_init(), in kvm_vgic_map_resource() and in
vgic_{v2,v3}_map_resources(), which makes it hard to reason about and
introduces minor code duplication. Consolidate the checks in
kvm_vgic_map_resources(), where the lock is taken.
No functional change intended.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201201150157.223625-4-alexandru.elisei@arm.com
|
|
kvm_timer_enable() is called in kvm_vcpu_first_run_init() after
kvm_vgic_map_resources() if the VGIC wasn't ready. kvm_vgic_map_resources()
is the only place where kvm->arch.vgic.ready is set to true.
For a v2 VGIC, kvm_vgic_map_resources() will attempt to initialize the VGIC
and set the initialized flag.
For a v3 VGIC, kvm_vgic_map_resources() will return an error code if the
VGIC isn't already initialized.
The end result is that if we've reached kvm_timer_enable(), the VGIC is
initialzed and ready and vgic_initialized() will always be true, so remove
this check.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[maz: added comment about vgic initialisation, as suggested by Eric]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201201150157.223625-3-alexandru.elisei@arm.com
|