summaryrefslogtreecommitdiffstats
path: root/arch/sh/mm
AgeCommit message (Collapse)AuthorFilesLines
2007-11-19sh: lockless UTLB miss fast-path.Paul Mundt1-18/+7
With the refactored update_mmu_cache() introduced in older kernels, there's no longer any need to take the page_table_lock in this path, so simply drop it completely. Without this, performance degradation is seen on SMP on heavily threaded workloads that don't use the split ptlock, and ultimately we have no reason to contend for the lock in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19sh: Kill off UTLB flush in fast-path.Paul Mundt1-8/+0
The __do_page_fault() fast-path contains a UTLB flush in order to force an ITLB reload, this isn't needed in practice as the ITLB is auto-reloaded from the UTLB anyways, which is already displaced by the manual 'ldtlb' in the update_mmu_cache() path. This provides a measurable speed up in the TLB miss fast-path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off __{copy,clear}_user_page().Paul Mundt2-106/+0
Now that copy_to_user_page()/copy_from_user_page() are wired up, we can drop the old __copy_xxx() implementations. Now that the page colouring scheme has changed via kmap_coherent(), we can avoid the flush in these specific helpers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Optimized copy_{to,from}_user_page() for SH-4.Paul Mundt1-23/+29
This moves copy_{to,from}_user_page() out-of-line on SH-4 and converts for the kmap_coherent() API. Based on the MIPS implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Wire up clear_user_highpage().Paul Mundt1-0/+23
With the kmap_coherent() API in place, this is trivial to implement, and lets us avoid the cache flush in certain cases. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt1-20/+1
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Add -Werror for clean directories.Paul Mundt1-0/+2
Follow the MIPS and sparc64 changes for -Werror instrumentation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02sh: Fix optimized __copy_user() movca.l usage.Stuart Menefy1-0/+4
movca.l is restricted to SH-4 and up only, though compilers that are unable to support ISA tuning (especially older versions of binutils) will happily compile in the bogus opcode on older parts. Conditionalize it to fix SH-3 regressions noted by Kristoffer. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-19pid namespaces: define is_global_init() and is_container_init()Serge E. Hallyn1-1/+1
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove dma_cache_(wback|inv|wback_inv) functionsRalf Baechle1-4/+4
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter1-2/+1
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fix memory hot remove not configured case.KAMEZAWA Hiroyuki1-6/+0
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess. This patch cleans up them. This is against 2.6.23-rc6-mm1. - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case. - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(), which returns -EINVAL. - removed remove_pages() only used in powerpc. - removed no-op remove_memory() in i386, sh, sparc64, x86_64. - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it to return -EINVAL. Note: Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other archs if there are requirements and testers. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16During VM oom condition, kill all threads in process groupWill Schmidt1-1/+1
We have had complaints where a threaded application is left in a bad state after one of it's threads is killed when we hit a VM: out_of_memory condition. Killing just one of the process threads can leave the application in a bad state, whereas killing the entire process group would allow for the application to restart, or be otherwise handled, and makes it very obvious that something has gone wrong. This change allows the entire process group to be taken down, rather than just the one thread. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28sh: __copy_user() optimizations for small copies.Stuart Menefy1-61/+108
This implements a fast-path for small (less than 12 bytes) copies, with the existing path treated as the slow-path and left as the default behaviour for all other copy sizes. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27sh: Support extended mode TLB on SH-X3.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27sh: Bump MAX_ACTIVE_REGIONS for SH7785.Paul Mundt1-1/+2
When using URAM in NUMA mode another active region is needed. Bump this up so we don't trigger the region truncation in add_active_range(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27sh: Disable 4kB pages on extended mode TLB.Paul Mundt1-3/+5
4kB pages are unstable on extended mode TLB, it's recommended that TLB compat mode be used when using a 4kB PAGE_SIZE. Set the default for extended mode to 8kB. This should have negligible impact, as other than the extra swap cache entry bits, there's no reason to use the extended mode TLB with 4kB pages. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: Revert incorrect license string changes.Paul Mundt1-1/+1
These were right the first time. Either a thinko or building in the wrong tree. Revert this. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: Calculate cache aliases on L2 caches.Paul Mundt1-0/+15
Calculate the number of cache aliases on probed L2 caches, and while we're at it, print out the detected statistics at boot time for these also. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: nommu: Kill off dummy page fault ops for SH-3/4.Paul Mundt2-67/+0
We stopped referencing these functions unconditionally when the old entry.S code was refactored, so this is just dead code at present. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: Fix alias calculation for non-aliasing cases.Paul Mundt1-2/+2
There was an off-by-1 on the cache alias detection logic on SH-4, which caused n_aliases to always be 1 even when the page size precluded the existence of aliases. With this corrected, 64KB pages happily reports n_aliases == 0, and hits the appropriate fast paths in the flushing routines. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Initial SH-X3 SMP support.Paul Mundt1-0/+1
This adds basic support for SH-X3 SMP (4 CPUs). More IPI and cache debugging is necessary, mostly interfacing the d-cache coherency and the I-cache broadcast invalidates. Only for testing at present! Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Avoid smp_processor_id() in cache desc paths.Paul Mundt1-31/+31
current_cpu_data uses smp_processor_id() in order to find the corresponding cpu_data. As the cache descs are all currently identical, just have this look at probed results from the boot CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up extended mode TLB for SH-X2+ cores.Paul Mundt1-17/+13
The extended mode TLB requires both 64-bit PTEs and a 64-bit pgprot, correspondingly, the PGD also has to be 64-bits, so fix that up. The kernel and user permission bits really are decoupled in early cuts of the silicon, which means that we also have to set corresponding kernel permissions on user pages or we end up with user pages that the kernel simply can't touch (!). Finally, with those things corrected, really enable MMUCR.ME and correct the PTEA value (this simply needs to be the upper 32-bits of the PTE, with the size and protection bit encoding). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Wire up URAM node on SH7785.Paul Mundt1-0/+2
Add SH7785 URAM as node 1, follows the SH-X3 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Don't enable FPU for SH4AL-DSP.Paul Mundt1-0/+1
This leads to invalid configurations where both FPU and DSP support can be enabled in the same kernel, resulting in build failure. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: nommu fault handler needs signal.h.Paul Mundt1-0/+1
Trivial build fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: minor fixesMagnus Damm1-1/+0
This patch contains the following fixes: - Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT. - Removes duplicate include from rts7751r2d irq code. - Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: remove CONFIG_CPU_HAS_INTC_IRQMagnus Damm1-20/+0
All processor specific interrupt code is now converted to make use of the new intc code. The config option CONFIG_CPU_HAS_INTC_IRQ is because of that pointless. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: More license string silliness.Paul Mundt1-1/+1
'GPL v2' vs 'GPLv2'. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7206Magnus Damm1-1/+1
This patch converts the cpu specific interrupt setup code for sh7206 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7619Magnus Damm1-1/+1
This patch converts the cpu specific interrupt setup code for sh7619 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add SH7720 CPU support.Markus Brunner1-0/+8
This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Bump up NODES_SHIFT for SH-X3.Paul Mundt1-0/+1
This was at 1, which is where most subtypes want it. SH-X3 has more nodes, so bump it up to 3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: remove intc2 codeMagnus Damm1-1/+0
There is no point in keeping around the now unused intc2 code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Initial multiple-node support for SH-X3.Paul Mundt1-0/+3
Wire up CPU#0 URAM as node 1 on SH-X3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for x3Magnus Damm1-1/+1
This patch converts the cpu specific interrupt setup code for x3 from intc2 to intc. New vectors are also added to match the preliminary information. Use plat_irq_setup_pins() to select between IRQ and IRL mode for IRQ0-3. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix cache disabling build failures on nommu.Paul Mundt1-10/+14
The cache disabling stuff screwed up some of the sh4 nommu builds, fix it up again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for SH7760Magnus Damm1-2/+1
This patch converts the cpu specific interrupt setup code for sh7760 from ipr + intc2 to intc. New vectors are also added to match the information provided by the datasheet. Vectors for IRQ4-IRQ7 are enabled by default. Use plat_irq_setup_pins() if pins IRL0-3 should be used in IRLM mode. The patch also adds the SIM block to the serial port platform data. Version two of this patch fixes MMCIF problems reported by Manuel Lauss. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for SH7785Magnus Damm1-1/+1
This patch converts the cpu specific interrupt setup code for sh7785 from intc2 to intc. New vectors are also added to match the information provided by the datasheet. No IRQ/IRL pin vectors are enabled by default. Use plat_irq_setup_pins() to select between IRL and IRQ mode. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Support explicit L1 cache disabling.Paul Mundt4-19/+38
This reworks the cache mode configuration in Kconfig, and allows for explicit selection of write-back/write-through/off configurations. All of the cache flushing routines are optimized away for the off case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for SH7706, SH7707, SH7708, SH7709Magnus Damm1-2/+4
This patch unifies the cpu specific interrupt setup code for sh7706, sh7707, sh7708 and sh7709 and moves the code into a new file called setup-sh770x.c. It makes sense to share the setup code between these processors because most hardware blocks are identical from a software point of view. With this patch the sh770x processors now have a complete set of vectors that match with the information provided by the data sheets. This is a big improvement for sh7708. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also unifies the platform device setup code which means that the rtc driver now has platform data for all sh770x processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for SH7710Magnus Damm1-2/+2
This patch converts the cpu specific interrupt setup code for sh7710 from ipr to intc. While at it new vectors are added to match the information provided by the datasheet. Version two simplifies the Kconfig part. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also adds sh7710 specific platform data for the rtc driver. The base address of SCIF1 is adjusted to match the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for SH7705Magnus Damm1-1/+1
This patch converts the cpu specific interrupt setup code for sh7705 from ipr to intc. While at it new vectors are added to match the information provided by the datasheet. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also adds sh7705 specific platform data for the rtc driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-01sh: Fix pgd mismatch from cached TTB in unhandled fault.Paul Mundt1-2/+1
When reading the cached TTB value and extracting the pgd, we accidentally applied a __va() to it and bumped it off in to bogus space which ended up causing multiple faults in the error path. Fix it up so unhandled faults don't do strange and highly unorthodox things when oopsing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-01sh: Don't include fault-nommu on SH-2/SH-2A.Paul Mundt1-1/+3
fault-nommu defines the page fault handler stubs for SH-3/4 parts, but is not needed on SH-2/SH-2A now that the entry code has been logically separated. Add it in for SH-3 and SH-4 explicitly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-01sh: Fix irqflags tracing for SH-3/4 nommu.Paul Mundt1-32/+15
We were missing the trace_hardirqs_on() instrumentation in the nommu case, resync with the MMU version of the page fault handler to have this behaving consistently. Also explicitly re-enable IRQs now that the assembly code isn't doing it for us any more. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-31sh: Fix fs.h removal from mm.h regressions.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm1-4/+0
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: Restrict DSP support to specific CPUs.Paul Mundt1-0/+3
Not all CPUs support the DSP, and this leads to problems when mixing and matching CPU types and DSP opcodes. Fix this up by only allowing CONFIG_SH_DSP to be enabled for the CPUs that explicitly have such a block. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 15:30:02 +0000