summaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/cpu/sh3
AgeCommit message (Collapse)AuthorFilesLines
2014-10-29sh: fix sh770x SCIF memory regionsAndriy Skulysh1-3/+3
Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf975be ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-11sh: Switch to new style TMU deviceLaurent Pinchart4-288/+24
The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11sh: Switch to new style CMT deviceLaurent Pinchart1-138/+12
The CMT (Compare Match Timer) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart4-9/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: Declare SCIF register base and IRQ as resourcesLaurent Pinchart4-18/+63
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-14sh: delete __cpuinit usage from all sh filesPaul Gortmaker1-1/+1
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/sh uses of the __cpuinit macros from all C files. Currently sh does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-1/+1
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-03-20sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIBAlexandre Courbot1-1/+1
SH GPIO drivers all use gpiolib and CONFIG_GENERIC_GPIO is only selected through CONFIG_GPIOLIB, yet some compilation units depended on CONFIG_GENERIC_GPIO. Make them depend on CONFIG_GPIOLIB instead since it is more accurate and prepares us for the future removal of CONFIG_GENERIC_GPIO. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-15sh: sh7720: Add pin control resourcesLaurent Pinchart1-2/+12
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-01-25sh: sh7720: pinmux: Use driver-provided pinmux infoLaurent Pinchart1-1224/+1
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7720: Register PFC platform deviceLaurent Pinchart1-1/+2
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-10-22sh: convert boards to use the OHCI platform driverFlorian Fainelli1-1/+5
This patch makes all SuperH boards using the ohci-sh platform driver to use the ohci-platform driver instead, which is suitable for use by these boards. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-02sh: Fix up se7721 GPIOLIB=y build warnings.Paul Mundt1-1/+1
Presently the SH7720/21 serial code uses asm/gpio.h to get at the CPU GPIO port definitions, but in the case of GPIOLIB=y this also includes references to generic GPIOLIB routines that we don't have any function declarations for, tripping up on -Werror=implicit-function-declaration with newer gcc versions: CC arch/sh/kernel/cpu/sh3/serial-sh7720.o In file included from include/linux/sh_pfc.h:14:0, from arch/sh/include/asm/gpio.h:23, from arch/sh/kernel/cpu/sh3/serial-sh7720.c:5: include/asm-generic/gpio.h: In function 'gpio_get_value_cansleep': include/asm-generic/gpio.h:220:2: error: implicit declaration of function '__gpio_get_value' [-Werror=implicit-function-declaration] include/asm-generic/gpio.h: In function 'gpio_set_value_cansleep': include/asm-generic/gpio.h:226:2: error: implicit declaration of function '__gpio_set_value' [-Werror=implicit-function-declaration] In file included from arch/sh/include/asm/gpio.h:23:0, from arch/sh/kernel/cpu/sh3/serial-sh7720.c:5: include/linux/sh_pfc.h: At top level: include/linux/sh_pfc.h:121:19: error: field 'chip' has incomplete type Switch to using the cpu/ version for the port definitions explicitly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Merge branch 'sh/evt2irq-migration' into sh-latestPaul Mundt4-29/+34
Conflicts: arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7757.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7720 evt2irq migration.Paul Mundt1-15/+17
Migrate SH7720 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7710/sh7712 evt2irq migration.Paul Mundt1-6/+7
Migrate SH7710/SH7712 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7706/sh7707/sh7709/sh7709 evt2irq migration.Paul Mundt1-7/+8
Migrate SH770x to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7705 evt2irq migration.Paul Mundt1-6/+7
Migrate SH7705 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14sh: Support thread fault code encoding.Paul Mundt1-5/+6
This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-17sh: sh3: Change the specification method of IRQ to SCIx_IRQ_MUXEDNobuhiro Iwamatsu4-9/+9
Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this. And change use to evt2irq(), without specifying the value of IRQ directly. This is correction to the SH3 series. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-12sh: sh3 sh_clk_ops renameMagnus Damm6-35/+35
Convert sh3 SoCs to use sh_clk_ops. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-06-20sh: Fix up build fallout from serial merge.Paul Mundt1-0/+1
This fixes up build issues for SH7720/SH7722/SH7750 that crept in with the serial rework. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14serial: sh-sci: Abstract register maps.Paul Mundt7-9/+116
This takes a bit of a sledgehammer to the horribly CPU subtype ifdef-ridden header and abstracts all of the different register layouts in to distinct types which in turn can be overriden on a per-port basis, or permitted to default to the map matching the port type at probe time. In the process this ultimately fixes up inumerable bugs with mismatches on various CPU types (particularly the legacy ones that were obviously broken years ago and no one noticed) and provides a more tightly coupled and consolidated platform for extending and implementing generic features. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-08serial: sh-sci: Consolidate RXD pin handling.Paul Mundt1-0/+1
Non-SCI parts do not have the special port reg necessary for cases where the RX and SCI pins are muxed and need to be manually polled, so these like always fall back on the normal FIFO processing paths. SH7760 is in a class in and of itself with regards to mapping its SIM card interface via the SCI port class despite not having any of the RXD lines wired up and so implicitly behaving more like a SCIF in this regard. Out of the other CPUs, some support the port check via the same block while others do it through an external SuperI/O, so it's not even possible to perform the check relative to the ioremapped cookie offset, so the separate read semantics are preserved here, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13Merge branch 'master' of ↵Paul Mundt14-293/+265
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework Conflicts: arch/sh/kernel/cpu/sh2/setup-sh7619.c arch/sh/kernel/cpu/sh2a/setup-mxg.c arch/sh/kernel/cpu/sh2a/setup-sh7201.c arch/sh/kernel/cpu/sh2a/setup-sh7203.c arch/sh/kernel/cpu/sh2a/setup-sh7206.c arch/sh/kernel/cpu/sh3/setup-sh7705.c arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh4-202.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4/setup-sh7760.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7780.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c arch/sh/kernel/cpu/sh4a/setup-shx3.c arch/sh/kernel/cpu/sh5/setup-sh5.c drivers/serial/sh-sci.c drivers/serial/sh-sci.h include/linux/serial_sci.h
2010-04-21sh: Tidy CPU probing and fixup section annotations.Paul Mundt1-3/+1
This does a detect_cpu_and_cache_system() -> cpu_probe() rename, tidies up the unused return value, and stuffs it under __cpuinit in preparation for CPU hotplug. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29sh: Kill off timer clock strings for legacy CPG parts.Paul Mundt4-17/+0
Now with the lookup aliases in place there is no longer any need to provide the clock string, kill it off for all legacy CPG CPUs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10sh: Kill off all timer name clobbering.Paul Mundt4-34/+0
Now that dev_name() can be used early, we no longer require a static string. Kill off all of the superfluous timer names. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08Merge branches 'sh/dwarf-unwinder', 'sh/g3-prep' and 'sh/stable-updates'Paul Mundt1-1/+2
2010-02-08sh: Remove superfluous setup_frame_reg callMatt Fleming1-1/+0
There's no need to setup the frame pointer again in call_handle_tlbmiss. The frame pointer will already have been setup in handle_interrupt. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08sh: Setup frame pointer in handle_exception pathMatt Fleming1-0/+2
In order to allow the DWARF unwinder to unwind through exceptions we need to setup the frame pointer register (r14). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26sh: Mass ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt8-37/+37
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-21sh: Kill off the special uncached section and fixmap.Paul Mundt1-1/+1
Now that cached_to_uncached works as advertized in 32-bit mode and we're never going to be able to map < 16MB anyways, there's no need for the special uncached section. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-21Merge branch 'master' into sh/hw-breakpointsPaul Mundt4-87/+142
2009-12-15sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720)Magnus Damm4-87/+142
This patch breaks out the sh3 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-08Merge branch 'master' into sh/hw-breakpointsPaul Mundt1-33/+0
Conflict between FPU thread flag migration and debug thread flag addition. Conflicts: arch/sh/include/asm/thread_info.h arch/sh/include/asm/ubc.h arch/sh/kernel/process_32.c
2009-12-08sh: hw-breakpoints: Add preliminary support for SH-4A UBC.Paul Mundt1-1/+1
This adds preliminary support for the SH-4A UBC to the hw-breakpoints API. Presently only a single channel is implemented, and the ptrace interface still needs to be converted. This is the first step to cleaning up the long-standing UBC mess, making the UBC more generally accessible, and finally making it SMP safe. An additional abstraction will be layered on top of this as with the perf events code to permit the various CPU families to wire up support for their own specific UBCs, as many variations exist. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-18sh: Disable SCIF2 on the SH-X3 proto CPU.Paul Mundt1-33/+0
SCIF2 and the FPU exceptions happen to share vector numbers, one in EXPEVT and the other in INTEVT. This is a violation of the interface and should have never made it in to silicon. On top of that, the demux hack that was added for special dispatch is rather error prone, and introduces more problems than it solves. Kill all of it off, and just refuse to deal with SCIF2 outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-28sh: Don't enable interrupts in the page fault pathMatt Fleming1-2/+0
There's already code in do_page_fault() to conditionally enable interrupts, so we don't need to unconditonally enable them before calling it. This fixes a lockdep warning where we called trace_hardirqs_off() but with irqs still enabled. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-14sh: clkfwk: remove bogus set_bus_parent() from SH7709.Rafael Ignacio Zurita1-11/+0
This fixes up broken clock re-parenting undertaken by the SH7709 clock framework code, which is currently in conflict with the legacy CPG framework. With this change in place, the legacy CPG ancestry is used, and we manage to avoid contending on the clock_list_sem mutex, which is already held under the legacy registration path, resulting in livelock. In order for SH7709 to fully support the varying clock modes, it needs to implement a more complete clock framework. After this change it is in sync with legacy CPG mode, which ends up being the default configuration for this CPU anyways. Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: Kill off kgdb's magical NMI debouncing.Paul Mundt1-31/+0
The kgdb stub has traditionally tied in to the NMI slot, and manually handled debounce. Now that we have a generic way to do this instead, all of the stub-specific debounce silliness can be killed off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: nmi_debug support.Paul Mundt2-3/+27
This implements support for NMI debugging that was shamelessly copied from the avr32 port. A bit of special magic is needed in the interrupt exception path given that the NMI exception handler is stubbed in to the regular exception handling table despite being reported in INTEVT. So we mangle the lookup and kick off an EXPEVT-style exception dispatch from the INTEVT path for exceptions that do_IRQ() has no chance of handling. As a result, we also drop the evt2irq() conversion from the do_IRQ() path and just do it in assembly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01Merge branch 'master' into sh/smpPaul Mundt1-1/+3
Conflicts: arch/sh/mm/cache-sh4.c
2009-08-24sh: Remove implicit sign extension from assembler immediatesStuart Menefy1-1/+1
The SH instruction set has several instructions which accept an 8 bit immediate operand. For logical instructions this operand is zero extended, for arithmetic instructions the operand is sign extended. After adding an option to the assembler to check this, it was found that several pieces of assembly code were assuming this behaviour, and in one case getting it wrong. So this patch explicitly sign extends any immediate operands, which makes it obvious what is happening, and fixes the one case which got it wrong. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22Merge branch 'sh/dwarf-unwinder'Paul Mundt1-0/+2
Conflicts: arch/sh/kernel/cpu/sh3/entry.S
2009-08-21sh: Setup the frame pointer in handle_interruptMatt Fleming1-0/+2
When CONFIG_DWARF_UNWINDER is enabled setup r14 in handle_interrupt, so that we can figure out what function was running when we were interrupted. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-19Merge branch 'master' into sh/cachetlbPaul Mundt1-0/+8
Conflicts: arch/sh/kernel/Makefile_64
2009-08-18sh: Add a few missing irqflags tracing markers.Matt Fleming1-0/+8
save_regs contains an SR modification without an irqflags annotation, which resulted in a missing TRACE_IRQS_OFF in the interrupt exception path on SH-3/SH4. I've also moved the TRACE_IRQS_OFF/ON annotation when returning from the interrupt to just before we call __restore_all. This seems like the most logical place to put this because the annotation is for when we restore the SR register so we should delay the annotation until as last as possible. We were also missing a TRACE_IRQS_OFF in resume_kernel when CONFIG_PREEMPT is enabled. The end result is that this fixes up the lockdep engine debugging support with CONFIG_PREEMPT enabled on all SH-3/4 parts. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Track the CPU family in sh_cpuinfo.Paul Mundt1-0/+2
This adds a family member to struct sh_cpuinfo, which allows us to fall back more on the probe routines to work out what sort of subtype we are running on. This will be used by the CPU cache initialization code in order to first do family-level initialization, followed by subtype-level optimizations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15Merge branch 'master' into sh/cachetlbPaul Mundt5-4/+5
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:05:36 +0000