summaryrefslogtreecommitdiffstats
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick2-2/+2
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds2-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds32-1924/+2386
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-08-02MIPS: Use CPHYSADDR to implement mips32 __paPaul Burton1-10/+28
Use CPHYSADDR to implement the __pa macro converting from a virtual to a physical address for MIPS32, much as is already done for MIPS64 (though without the complication of having both compatibility & XKPHYS segments). This allows for __pa to work regardless of whether the address being translated is in kseg0 or kseg1, unlike the previous subtraction based approach which only worked for addresses in kseg0. Working for kseg1 addresses is important if __pa is used on addresses allocated by dma_alloc_coherent, where on systems with non-coherent I/O we provide addresses in kseg1. If this address is then used with dma_map_single_attrs then it is provided to virt_to_page, which in turn calls virt_to_phys which is a wrapper around __pa. The result is that we end up with a physical address 0x20000000 bytes (ie. the size of kseg0) too high. In addition to providing consistency with MIPS64 & fixing the kseg1 case above this has the added bonus of generating smaller code for systems implementing MIPS32r2 & beyond, where a single ext instruction can extract the physical address rather than needing to load an immediate into a temp register & subtract it. This results in ~1.3KB savings for a boston_defconfig kernel adjusted to set CONFIG_32BIT=y. This patch does not change the EVA case, which may or may not have similar issues around handling both cached & uncached addresses but is beyond the scope of this patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.Aaro Koskinen1-0/+15
Add more leds discovered by reverse engineering. Labels are according to markings in the mechanics. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13466/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.Aaro Koskinen1-2/+3
Clean up GPIO definitions in dlink_dsr-1000n.dts. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.Aaro Koskinen3-41/+4
Users will get more complete functionality by using the appended DTB, so delete the legacy booting support for this board. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: store the appended dtb address in a variableJonas Gorski7-15/+30
Instead of rewriting the arguments to match the UHI spec, store the address of a appended or UHI supplied dtb in fw_supplied_dtb. That way the original bootloader arugments are kept intact while still making the use of an appended dtb invisible for mach code. Mach code can still find out if it is an appended dtb by comparing fw_arg1 with fw_supplied_dtb. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alban Bedel <albeu@free.fr> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: ZBOOT: copy appended dtb to the end of the kernelJonas Gorski3-36/+19
Instead of rewriting the arguments, just move the appended dtb to where the decompressed kernel expects it. This eliminates the need for special casing vmlinuz.bin appended dtb files. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alban Bedel <albeu@free.fr> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13698/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: ralink: fix spis group pinmuxÁlvaro Fernández Rojas1-1/+1
pwm function for spis conflicts with uart2 and uart1, fix this by changing it to pwm_uart2, which reflects the real use of these pins with these pinmux (2 for pwm and 2 for uart). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13369/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: Factor o32 specific code into signal_o32.cHarvey Hunt4-284/+293
The commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") caused building a 64 bit kernel with support for n32 and not o32 to produce a build error: arch/mips/kernel/signal32.c:415:11: error: ‘vdso_image_o32’ undeclared here (not in a function) .vdso = &vdso_image_o32, Fix this by moving the o32 specific code into signal_o32.c and updating the Makefile accordingly. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13690/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is presentPaul Burton3-2/+26
The stack and heap have both been executable by default on MIPS until now. This patch changes the default to be non-executable, but only for ELF binaries with a non-executable PT_GNU_STACK header present. This does apply to both the heap & the stack, despite the name PT_GNU_STACK, and this matches the behaviour of other architectures like ARM & x86. Current MIPS toolchains do not produce the PT_GNU_STACK header, which means that we can rely upon this patch not changing the behaviour of existing binaries. The new default will only take effect for newly compiled binaries once toolchains are updated to support PT_GNU_STACK, and since those binaries are newly compiled they can be compiled expecting the change in default behaviour. Again this matches the way in which the ARM & x86 architectures handled their implementations of non-executable memory. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13765/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02MIPS: Use per-mm page to execute branch delay slot instructionsPaul Burton12-133/+391
In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-01MIPS: Modify error handlingAmitoj Kaur Chawla1-2/+2
debugfs_create_file returns NULL on error so an IS_ERR test is incorrect here and a NULL check is required. The Coccinelle semantic patch used to make this change is as follows: @@ expression e; @@ e = debugfs_create_file(...); if( - IS_ERR(e) + !e ) { <+... return - PTR_ERR(e) + -ENOMEM ; ...+> } Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Cc: julia.lawall@lip6.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13834/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas7-15/+36
Conflicts: drivers/nvme/host/pci.c
2016-08-01MIPS: Select HAVE_KVM for MIPS64_R{2,6}James Hogan1-0/+2
We are now able to support KVM T&E with MIPS32 guests on some MIPS64r2 and MIPS64r6 hosts, so select HAVE_KVM so it can be enabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Reset CP0_PageMask during host TLB flushJames Hogan1-0/+2
KVM sometimes flushes host TLB entries, reading each one to check if it corresponds to a guest KSeg0 address. In the absence of EntryHi.EHInv bits to invalidate the whole entry, the entries will be set to unique virtual addresses in KSeg0 (which is not TLB mapped), spaced 2*PAGE_SIZE apart. The TLB read however will clobber the CP0_PageMask register with whatever page size that TLB entry had, and that same page size will be written back into the TLB entry along with the unique address. This would cause breakage when transparent huge pages are enabled on 64-bit host kernels, since huge page entries will overlap other nearby entries when separated by only 2*PAGE_SIZE, causing a machine check exception. Fix this by restoring the old CP0_PageMask value (which should be set to the normal page size) after reading the TLB entry if we're going to go ahead and invalidate it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()James Hogan1-1/+1
kvm_mips_trans_replace() passes a pointer to KVM_GUEST_KSEGX(). This breaks on 64-bit builds due to the cast of that 64-bit pointer to a different sized 32-bit int. Cast the pointer argument to an unsigned long to work around the warning. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Sign extend MFC0/RDHWR resultsJames Hogan1-3/+4
When emulating MFC0 instructions to load 32-bit values from guest COP0 registers and the RDHWR instruction to read the CC (Count) register, sign extend the result to comply with the MIPS64 architecture. The result must be in canonical 32-bit form or the guest may malfunction. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Fix 64-bit big endian dynamic translationJames Hogan1-0/+8
The MFC0 and MTC0 instructions in the guest which cause traps can be replaced with 32-bit loads and stores to the commpage, however on big endian 64-bit builds the offset needs to have 4 added so as to load/store the least significant half of the long instead of the most significant half. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Fail if ebase doesn't fit in CP0_EBaseJames Hogan1-0/+12
Fail if the address of the allocated exception base doesn't fit into the CP0_EBase register. This can happen on MIPS64 if CP0_EBase.WG isn't implemented but RAM is available outside of the range of KSeg0. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Use 64-bit CP0_EBase when appropriateJames Hogan1-3/+22
Update the KVM entry point to write CP0_EBase as a 64-bit register when it is 64-bits wide, and to set the WG (write gate) bit if it exists in order to write bits 63:30 (or 31:30 on MIPS32). Prior to MIPS64r6 it was UNDEFINED to perform a 64-bit read or write of a 32-bit COP0 register. Since this is dynamically generated code, generate the right type of access depending on whether the kernel is 64-bit and cpu_has_ebase_wg. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Set CP0_Status.KX on MIPS64James Hogan1-2/+8
Update the KVM entry code to set the CP0_Entry.KX bit on 64-bit kernels. This is important to allow the entry code, running in kernel mode, to access the full 64-bit address space right up to the point of entering the guest, and immediately after exiting the guest, so it can safely restore & save the guest context from 64-bit segments. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Make entry code MIPS64 friendlyJames Hogan1-24/+24
The MIPS KVM entry code (originally kvm_locore.S, later locore.S, and now entry.c) has never quite been right when built for 64-bit, using 32-bit instructions when 64-bit instructions were needed for handling 64-bit registers and pointers. Fix several cases of this now. The changes roughly fall into the following categories. - COP0 scratch registers contain guest register values and the VCPU pointer, and are themselves full width. Similarly CP0_EPC and CP0_BadVAddr registers are full width (even though technically we don't support 64-bit guest address spaces with trap & emulate KVM). Use MFC0/MTC0 for accessing them. - Handling of stack pointers and the VCPU pointer must match the pointer size of the kernel ABI (always o32 or n64), so use ADDIU. - The CPU number in thread_info, and the guest_{user,kernel}_asid arrays in kvm_vcpu_arch are all 32 bit integers, so use lw (instead of LW) to load them. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Use kmap instead of CKSEG0ADDR()James Hogan2-7/+17
There are several unportable uses of CKSEG0ADDR() in MIPS KVM, which implicitly assume that a host physical address will be in the low 512MB of the physical address space (accessible in KSeg0). These assumptions don't hold for highmem or on 64-bit kernels. When interpreting the guest physical address when reading or overwriting a trapping instruction, use kmap_atomic() to get a usable virtual address to access guest memory, which is portable to 64-bit and highmem kernels. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: KVM: Use virt_to_phys() to get commpage PFNJames Hogan1-1/+1
Calculate the PFN of the commpage using virt_to_phys() instead of CPHYSADDR(). This is more portable as kzalloc() may allocate from XKPhys instead of KSeg0 on 64-bit kernels, which CPHYSADDR() doesn't handle. This is sufficient for highmem kernels too since kzalloc() will allocate from lowmem in KSeg0. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01MIPS: Fix definition of KSEGX() for 64-bitJames Hogan1-1/+1
The KSEGX() macro is defined to 32-bit sign extend the address argument and logically AND the result with 0xe0000000, with the final result usually compared against one of the CKSEG macros. However the literal 0xe0000000 is unsigned as the high bit is set, and is therefore zero-extended on 64-bit kernels, resulting in the sign extension bits of the argument being masked to zero. This results in the odd situation where: KSEGX(CKSEG) != CKSEG (0xffffffff80000000 & 0x00000000e0000000) != 0xffffffff80000000) Fix this by 32-bit sign extending the 0xe0000000 literal using _ACAST32_. This will help some MIPS KVM code handling 32-bit guest addresses to work on 64-bit host kernels, but will also affect KSEGX in dec_kn01_be_backend() on a 64-bit DECstation kernel, and the SiByte DMA page ops KSEGX check in clear_page() and copy_page() on 64-bit SB1 kernels, neither of which appear to be designed with 64-bit segments in mind anyway. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-30Merge tag 'devicetree-for-4.8' of ↵Linus Torvalds6-46/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...
2016-07-29Merge branch 'next' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - TPM core and driver updates/fixes - IPv6 security labeling (CALIPSO) - Lots of Apparmor fixes - Seccomp: remove 2-phase API, close hole where ptrace can change syscall #" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits) apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family) tpm: Factor out common startup code tpm: use devm_add_action_or_reset tpm2_i2c_nuvoton: add irq validity check tpm: read burstcount from TPM_STS in one 32-bit transaction tpm: fix byte-order for the value read by tpm2_get_tpm_pt tpm_tis_core: convert max timeouts from msec to jiffies apparmor: fix arg_size computation for when setprocattr is null terminated apparmor: fix oops, validate buffer size in apparmor_setprocattr() apparmor: do not expose kernel stack apparmor: fix module parameters can be changed after policy is locked apparmor: fix oops in profile_unpack() when policy_db is not present apparmor: don't check for vmalloc_addr if kvzalloc() failed apparmor: add missing id bounds check on dfa verification apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task apparmor: use list_next_entry instead of list_entry_next apparmor: fix refcount race when finding a child profile apparmor: fix ref count leak when profile sha1 hash is read apparmor: check that xindex is in trans_table bounds ...
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-21/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-29MIPS: c-r4k: Use SMP calls for CM indexed cache opsJames Hogan1-1/+1
The MIPS Coherence Manager (CM) can propagate address-based ("hit") cache operations to other cores in the coherent system, alleviating software of the need to use SMP calls, however indexed cache operations are not propagated by hardware since doing so makes no sense for separate caches. Update r4k_op_needs_ipi() to report that only hit cache operations are globalized by the CM, requiring indexed cache operations to be globalized by software via an SMP call. r4k_on_each_cpu() previously had a special case for CONFIG_MIPS_MT_SMP, intended to avoid the SMP calls when the only other CPUs in the system were other VPEs in the same core, and hence sharing the same caches. This was changed by commit cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") to apparently handle multi-core multi-VPE systems, but it focussed mainly on hit cache ops, so the SMP calls were still disabled entirely for CM systems. This doesn't normally cause problems, but tests can be written to hit these corner cases by using multiple threads, or changing task affinities to force the process to migrate cores. For example the failure of mprotect RW->RX to globally sync icaches (via flush_cache_range) can be detected by modifying and mprotecting a code page on one core, and migrating to a different core to execute from it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13807/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Avoid small flush_icache_range SMP callsJames Hogan1-0/+21
Avoid SMP calls for flushing small icache ranges. On non-CM platforms, and CM platforms too after we make r4k_on_each_cpu() take the cache op type into account, it will be called on multiple CPUs due to the possibility that local_r4k_flush_icache_range_ipi() could do non-globalized indexed cache ops. This rougly copies the range size check out into r4k_flush_icache_range(), which can disallow indexed cache ops and allow r4k_on_each_cpu() to skip the SMP call. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13805/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Local flush_icache_range cache op overrideJames Hogan1-6/+18
Allow the permitted cache op types used by local_r4k_flush_icache_range_ipi() to be overridden by the SMP caller. This will allow SMP calls to be avoided under certain circumstances, falling back to a single CPU performing globalized hit cache ops only. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13803/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()James Hogan1-8/+17
Split the operation of r4k_flush_kernel_vmap_range() into separate SMP callbacks for the indexed cache flush and hit cache flush cases, since the logic to determine which to use can be determined by the initiating CPU prior to doing any SMP calls. This will help when we change r4k_on_each_cpu() to distinguish indexed and hit cache ops in a later patch, preventing globalized hit cache ops being performed redundantly on multiple CPUs. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Exclude sibling CPUs in SMP callsJames Hogan3-7/+18
When performing SMP calls to foreign cores, exclude sibling CPUs from the provided map, as we already handle the local core on the current CPU. This prevents an SMP call from for example core 0, VPE 1 to VPE 0 on the same core. In the process the cpu_foreign_map cpumask is turned into an array of cpumasks, so that each CPU has its own version of it which excludes sibling CPUs. r4k_op_needs_ipi() is also updated to reflect that cache management SMP calls are not needed when all CPUs are siblings (i.e. there are no foreign CPUs according to the new cpu_foreign_map[] semantics which exclude siblings). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13801/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Fix valid ASID optimisationJames Hogan1-13/+35
Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Add r4k_on_each_cpu cache op type argJames Hogan1-19/+51
The r4k_on_each_cpu() function calls the specified cache flush helper on other CPUs if deemed necessary due to the cache ops not being globalized by hardware. However this really depends on the cache op addressing type, as the MIPS Coherence Manager (CM) if present will globalize "hit" cache ops (addressed by virtual address), but not "index" cache ops (addressed by cache index). This results in index cache ops only being performed on a single CPU when CM is present. Most (but not all) of the functions called by r4k_on_each_cpu() perform cache operations exclusively with a single cache op type, so add a type argument and modify the callers to pass in some combination of R4K_HIT (global kernel virtual addressing or user virtual addressing conditional upon matching active_mm) and R4K_INDEX (index into cache). This will allow r4k_on_each_cpu() to later distinguish these cases and decide whether to perform an SMP call based on it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13798/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Avoid dcache flush for sigtrampsJames Hogan1-6/+10
Avoid the dcache and scache flush in local_r4k_flush_cache_sigtramp() if the icache fills straight from the dcache. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13802/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Fix sigtramp SMP call to use kmapJames Hogan1-6/+69
Fix r4k_flush_cache_sigtramp() and local_r4k_flush_cache_sigtramp() to flush the delay slot emulation trampoline cacheline through a kmap rather than directly when the active_mm doesn't match that of the task initiating the flush, a bit like local_r4k_flush_cache_page() does. This would fix a corner case on SMP systems without hardware globalized hit cache ops, where a migration to another CPU after the flush, where that CPU did not have the same mm active at the time of the flush, could result in stale icache content being executed instead of the trampoline, e.g. from a previous delay slot emulation with a similar stack pointer. This case was artificially triggered by replacing the icache flush with a full indexed flush (not globalized on CM systems) and forcing the SMP call to take place, with a test program that alternated two FPU delay slots with a parent process repeatedly changing scheduler affinity. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13797/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: c-r4k: Fix protected_writeback_scache_line for EVAJames Hogan1-0/+4
The protected_writeback_scache_line() function is used by local_r4k_flush_cache_sigtramp() to flush an FPU delay slot emulation trampoline on the userland stack from the caches so it is visible to subsequent instruction fetches. Commit de8974e3f76c ("MIPS: asm: r4kcache: Add EVA cache flushing functions") updated some protected_ cache flush functions to use EVA CACHEE instructions via protected_cachee_op(), and commit 83fd43449baa ("MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line") did the same thing for protected_writeback_dcache_line(), but protected_writeback_scache_line() never got updated. Lets fix that now to flush the right user address from the secondary cache rather than some arbitrary kernel unmapped address. This issue was spotted through code inspection, and it seems unlikely to be possible to hit this in practice. It theoretically affect EVA kernels on EVA capable cores with an L2 cache, where the icache fetches straight from RAM (cpu_icache_snoops_remote_store == 0), running a hard float userland with FPU disabled (nofpu). That both Malta and Boston platforms override cpu_icache_snoops_remote_store to 1 suggests that all MIPS cores fetch instructions into icache straight from L2 rather than RAM. Fixes: de8974e3f76c ("MIPS: asm: r4kcache: Add EVA cache flushing functions") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13800/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: SMP: Drop stop_this_cpu() cpu_foreign_map hackJames Hogan1-8/+1
Commit cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") added the cpu_foreign_map cpumask containing a single VPE from each online core, and recalculated it when secondary CPUs are brought up. stop_this_cpu() was also updated to recalculate cpu_foreign_map, but with an additional hack before marking the CPU as offline to copy cpu_online_mask into cpu_foreign_map and perform an SMP memory barrier. This appears to have been intended to prevent cache management IPIs being missed when the VPE representing the core in cpu_foreign_map is taken offline while other VPEs remain online. Unfortunately there is nothing in this hack to prevent r4k_on_each_cpu() from reading the old cpu_foreign_map, and smp_call_function_many() from reading that new cpu_online_mask with the core's representative VPE marked offline. It then wouldn't send an IPI to any online VPEs of that core. stop_this_cpu() is only actually called in panic and system shutdown / halt / reboot situations, in which case all CPUs are going down and we don't really need to care about cache management, so drop this hack. Note that the __cpu_disable() case for CPU hotplug is handled in the previous commit, and no synchronisation is needed there due to the use of stop_machine() which prevents hotplug from taking place while any CPU has disabled preemption (as r4k_on_each_cpu() does). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13796/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: SMP: Update cpu_foreign_map on CPU disableJames Hogan6-1/+7
When a CPU is disabled via CPU hotplug, cpu_foreign_map is not updated. This could result in cache management SMP calls being sent to offline CPUs instead of online siblings in the same core. Add a call to calculate_cpu_foreign_map() in the various MIPS cpu disable callbacks after set_cpu_online(). All cases are updated for consistency and to keep cpu_foreign_map strictly up to date, not just those which may support hardware multithreading. Fixes: cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Hongliang Tao <taohl@lemote.com> Cc: Hua Yan <yanh@lemote.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13799/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-29MIPS: SMP: Clear ASID without confusing has_valid_asid()James Hogan2-2/+19
The SMP flush_tlb_*() functions may clear the memory map's ASIDs for other CPUs if the mm has only a single user (the current CPU) in order to avoid SMP calls. However this makes it appear to has_valid_asid(), which is used by various cache flush functions, as if the CPUs have never run in the mm, and therefore can't have cached any of its memory. For flush_tlb_mm() this doesn't sound unreasonable. flush_tlb_range() corresponds to flush_cache_range() which does do full indexed cache flushes, but only on the icache if the specified mapping is executable, otherwise it doesn't guarantee that there are no cache contents left for the mm. flush_tlb_page() corresponds to flush_cache_page(), which will perform address based cache ops on the specified page only, and also only touches the icache if the page is executable. It does not guarantee that there are no cache contents left for the mm. For example, this affects flush_cache_range() which uses the has_valid_asid() optimisation. It is required to flush the icache when mappings are made executable (e.g. using mprotect) so they are immediately usable. If some code is changed to non executable in order to be modified then it will not be flushed from the icache during that time, but the ASID on other CPUs may still be cleared for TLB flushing. When the code is changed back to executable, flush_cache_range() will assume the code hasn't run on those other CPUs due to the zero ASID, and won't invalidate the icache on them. This is fixed by clearing the other CPUs ASIDs to 1 instead of 0 for the above two flush_tlb_*() functions when the corresponding cache flushes are likely to be incomplete (non executable range flush, or any page flush). This ASID appears valid to has_valid_asid(), but still triggers ASID regeneration due to the upper ASID version bits being 0, which is less than the minimum ASID version of 1 and so always treated as stale. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-28MIPS: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFOJames Hogan2-0/+3
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined for MIPS at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for the VDSO address. This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for AT_BASE_PLATFORM which MIPS doesn't use, but lets define it now and add the comment above ARCH_DLINFO as found in several other architectures to remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to date. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13823/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-28MIPS: Octeon: Improve USB reset code for OCTEON II.Steven J. Hill1-48/+60
At boot time, do a better job of resetting the USB host controller to make the frequency "eye" diagram more compliant with the USB standard while making the controller more reliable. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-28MIPS: Octeon: Put restrictions on DMA descriptors.Steven J. Hill1-1/+5
Set the DMA mask such that all descriptors stay in the lower 4GB of memory. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13830/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-28MIPS: Octeon: Remove forced mappings of USB interrupts.Steven J. Hill2-14/+0
Get rid of unnecessary forced interrupt mappings for the USB host controller on OCTEON II. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13824/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-28KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspaceDavid Howells2-2/+2
MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl. The latter will work in a lot of cases, thereby hiding the issue. Reported-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: keyrings@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-28MIPS: Print segment physical address when EU=1James Hogan1-5/+8
Currently the debugfs interface to print the segment configuration refuses to print the physical address of mapped segments. However if the EU bit is set these become unmapped at error level (when CP0_Status.ERL=1), so the physical address is still relevant. Update the logic to print the physical address of mapped segments when the EU bit is set, while still hiding the Cache Coherency Attribute (since EU overrides that to uncached when ERL=1 too). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13833/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-27Merge tag 'spi-v4.8' of ↵Linus Torvalds1-328/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers" * tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: Split bus and I/O locking spi: octeon: Split driver into Octeon specific and common parts spi: octeon: Move include file from arch/mips to drivers/spi spi: octeon: Put register offsets into a struct spi: octeon: Store system clock freqency in struct octeon_spi spi: octeon: Convert driver to use readq()/writeq() functions spi: pic32-sqi: fixup wait_for_completion_timeout return handling spi: pic32: fixup wait_for_completion_timeout return handling spi: rockchip: limit transfers to (64K - 1) bytes spi: xilinx: Return IRQ_NONE if no interrupts were detected spi: xilinx: Handle errors from platform_get_irq() spi: s3c64xx: restore removed comments spi: s3c64xx: add Exynos5433 compatible for ioclk handling spi: s3c64xx: use error code from clk_prepare_enable() spi: s3c64xx: rename goto labels to meaningful names spi: s3c64xx: document the clocks and the clock-name property spi: s3c64xx: add exynos5433 spi compatible spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove() spi: spi-sh: Remove deprecated create_singlethread_workqueue spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue ...