summaryrefslogtreecommitdiffstats
path: root/arch/mips/mm
AgeCommit message (Collapse)AuthorFilesLines
2010-10-04MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.Ralf Baechle1-8/+20
This only matters for ISA devices with a 24-bit DMA limit or for devices with a 32-bit DMA limit on systems with ZONE_DMA32 enabled. The latter currently only affects 32-bit PCI cards on Sibyte-based systems with more than 1GB RAM installed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: RM7000: Symbol should be staticRicardo Mendoza1-1/+1
Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1540/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-11dma-mapping: remove dma_is_consistent APIFUJITA Tomonori1-7/+0
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09kmap_atomic: make kunmap_atomic() harder to misuseCesar Eduardo Barros1-2/+2
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse" list[1] ("Follow common convention and you'll get it wrong"), except in some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3]. kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes takes a pointer to within the page itself. This seems to once in a while trip people up (the convention they are following is the one from kunmap()). Make it much harder to misuse, by moving it to level 9 on Rusty's list[4] ("The compiler/linker won't let you get it wrong"). This is done by refusing to build if the type of its first argument is a pointer to a struct page. The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck() (which is what you would call in case for some strange reason calling it with a pointer to a struct page is not incorrect in your code). The previous version of this patch was compile tested on x86-64. [1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html [2] In these cases, it is at level 5, "Do it right or it will always break at runtime." [3] At least mips and powerpc look very similar, and sparc also seems to share a common ancestor with both; there seems to be quite some degree of copy-and-paste coding here. The include/asm/highmem.h file for these three archs mention x86 CPUs at its top. [4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html [5] As an aside, could someone tell me why mn10300 uses unsigned long as the first parameter of kunmap_atomic() instead of void *? Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Russell King <linux@arm.linux.org.uk> (arch/arm) Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips) Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300) Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300) Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc) Cc: Helge Deller <deller@gmx.de> (arch/parisc) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc) Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc) Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc) Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86) Cc: Ingo Molnar <mingo@redhat.com> (arch/x86) Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86) Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic) Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-05MIPS: kprobe: Add support.David Daney1-1/+14
This patch is based on previous work by Sony and Himanshu Chauhan. I have done some cleanup and implemented JProbes and KRETPROBES. The KRETPROBES part is pretty much copied verbatim from powerpc. A possible future enhance might be to factor out the common code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Himanshu Chauhan <hschauhan@nulltrace.org> To: linux-mips@linux-mips.org To: ananth@in.ibm.com, To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1525/ Patchwork: https://patchwork.linux-mips.org/patch/1530/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: uasm: Add option to export uasm API.David Daney1-49/+82
A 'select EXPORT_UASM' in Kconfig will cause the uasm to be exported for use in modules. When it is exported, all the uasm data and code cease to be __init and __initdata. Also daddiu_bug cannot be __cpuinitdata if uasm is exported. The cleanest thing is to just make it normal data. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: wim@iguana.be Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1500/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: uasm: Add BBIT0 and BBIT1 instructionsDavid Daney1-1/+21
These are OCTEON specific instructions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: wim@iguana.be Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1496/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: uasm: Add drotr32 and uasm_i_drotr_safe.David Daney1-5/+8
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: wim@iguana.be Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1495/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add base support for Ingenic JZ4740 System-on-a-ChipLars-Peter Clausen1-0/+5
Adds a new cpu type for the JZ4740 to the Linux MIPS architecture code. It also adds the iomem addresses for the different components found on a JZ4740 SoC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: RM7000: Add support for tertiary cacheRicardo Mendoza1-23/+128
Add support for the external T-cache interface. Allow for platform independent size probing from 512KB to 8MB in powers of two. Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: RM7000: Make use of cache_op() instead of inline asmRicardo Mendoza1-10/+2
Small cleanup of the cache code to get rid of inline asm, in preparation to give tertiary cache support. Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Remove unnecessary header file inclusion from fault.c.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Add -Werror to arch/mips/KbuildSam Ravnborg1-2/+0
Adding subdirs-ccflags-y := -Werror to arch/mips/Kbuild let us in one go cover all files with -Werror. In addition this allows us to remove the individual -Werror definition in various Makefile. Adding the definition to Kbuild as a recursive option help us not to forget to do so. With this change we now compile arch/mips/kernel/cpufreq with -Werror One drawback: When specifying a subdirectory covered by the Kbuild file like this: make arch/mips/kernel/ then kbuild fails to pick up the -Werror definition. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> To: linux-mips <linux-mips@linux-mips.org> To: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1301/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Check for accesses beyond the end of the PGD.David Daney1-23/+87
For some combinations of PAGE_SIZE and vmbits, it is possible to have userspace access that are beyond what is covered by the PGD, but within vmbits. Such an access would cause the TLB refill handler to load garbage values for PMD and PTE potentially giving userspace access to parts of the physical address space to which it is not entitled. In the TLB refill hot path, we add a single dsrl instruction so we can check if any bits outside of the range covered by the PGD are set. In the vmalloc side we then separate the bad case from the normal vmalloc case and call tlb_do_page_fault_0 if warranted. This slows us down a bit, but has the benefit of yielding deterministic behavior. [Ralf: Fixed build error for 32-bit kernels.] [Ralf: Folded lmo commit c8c0e22b2aa3982852b44279638ef37f9aa31b7d into this commit.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1152/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-04-30MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.cDavid Daney1-16/+14
This makes the code somewhat cleaner while reducing the risk of shift amount overflows when various page table related options are changed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1154/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modulesAnton Altaparmakov1-1/+1
Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp. 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) break non-GPL modules that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on MIPS. All those functions are EXPORT_SYMBOL() so are meant to be allowed to be used by non-GPL kernel modules. These calls all take page protection as an argument which is normally a constant like PAGE_KERNEL. This commit causes all protection constants like PAGE_KERNEL to not be constants and instead to contain the GPL-only symbol _page_cachable_default. This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL modules to fail to link with the complaint that they are trying to use the GPL-only symbol _page_cachable_default... Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Cc: Chris Dearman <chris@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Sibyte: Fix M3 TLB exception handler workaround.Ralf Baechle1-6/+16
The M3 workaround needs to cmpare the region and VPN2 fields only. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: uasm: Add OR instruction.Ralf Baechle1-1/+3
This is needed for the fix of the M3 workaround. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Add SYSCALL to uasm.David Daney1-2/+17
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/976/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo4-1/+3
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-28Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mm: Unify kernel_physical_mapping_init() API x86, mm: Allow highmem user page tables to be disabled at boot time x86: Do not reserve brk for DMI if it's not going to be used x86: Convert tlbstate_lock to raw_spinlock x86: Use the generic page_is_ram() x86: Remove BIOS data range from e820 Move page_is_ram() declaration to mm.h Generic page_is_ram: use __weak resources: introduce generic page_is_ram()
2010-02-27MIPS: Give Octeon+ CPUs their own cputype.David Daney1-3/+4
This allows us to treat them differently at runtime. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/951/ Patchwork: http://patchwork.linux-mips.org/patch/987/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Implement Read Inhibit/eXecute InhibitDavid Daney5-50/+220
The SmartMIPS ASE specifies how Read Inhibit (RI) and eXecute Inhibit (XI) bits in the page tables work. The upper two bits of EntryLo{0,1} are RI and XI when the feature is enabled in the PageGrain register. SmartMIPS only covers 32-bit systems. Cavium Octeon+ extends this to 64-bit systems by continuing to place the RI and XI bits in the top of EntryLo even when EntryLo is 64-bits wide. Because we need to carry the RI and XI bits in the PTE, the layout of the PTE is changed. There is a two instruction overhead in the TLB refill hot path to get the EntryLo bits into the proper position. Also the TLB load exception has to probe the TLB to check if RI or XI caused the exception. Also of note is that the layout of the PTE bits is done at compile and runtime rather than statically. In the 32-bit case this allows for the same number of PFN bits as before the patch as the _PAGE_HUGE is not supported in 32-bit kernels (we have _PAGE_NO_EXEC and _PAGE_NO_READ instead of _PAGE_READ and _PAGE_HUGE). The patch is tested on Cavium Octeon+, but should also work on 32-bit systems with the Smart-MIPS ASE. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/952/ Patchwork: http://patchwork.linux-mips.org/patch/956/ Patchwork: http://patchwork.linux-mips.org/patch/962/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Add TLBR and ROTR to uasm.David Daney1-2/+7
The soon to follow Read Inhibit/eXecute Inhibit patch needs TLBR and ROTR support in uasm. We also add a UASM_i_ROTR macro. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Use 64-bit stores to c0_entrylo on 64-bit kernels.David Daney1-10/+10
64-bit CPUs have 64-bit c0_entrylo{0,1} registers. We should use the 64-bit dmtc0 instruction to set them. This becomes important if we want to set the RI and XI bits present in some processors. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/954/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Remove #if 0 r4k_update_mmu_cache_hwbugDavid Daney1-34/+0
The function is #if 0ed out. There are no other occurrences of its name in the tree. It is safe to remove. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/936/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Move arch/mips/mm/uasm.h to arch/mips/include/asm/uasm.hFlorian Fainelli4-196/+3
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org To: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Nuke trailing blank linesRalf Baechle2-2/+0
Recent git versions now warn about those and they've always been a bit of an annoyance. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Remove probe_tlb().David Daney1-31/+0
The function probe_tlb() only does anything for processors that are not PRID_COMP_LEGACY. This is precisely the set of processors for which decode_configs() is called to do identical tlbsize probing calculations. Therefore probe_tlb() is completely redundant and may be removed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Two-level pagetables for 64-bit kernels with 64KB pages.David Daney3-18/+30
For 64-bit kernels with 64KB pages and two level page tables, there are 42 bits worth of virtual address space This is larger than the 40 bits of virtual address space obtained with the default 4KB Page size and three levels, so there are no draw backs for using two level tables with this configuration. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-22MIPS: Highmem: Fix build errorYoichi Yuasa1-0/+1
arch/mips/mm/highmem.c: In function 'kmap_init': arch/mips/mm/highmem.c:130: error: 'init_mm' undeclared (first use in this function) arch/mips/mm/highmem.c:130: error: (Each undeclared identifier is reported only once arch/mips/mm/highmem.c:130: error: for each function it appears in.) Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/980/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-17Merge branch 'linus' into x86/mmThomas Gleixner8-25/+66
x86/mm is on 32-rc4 and missing the spinlock namespace changes which are needed for further commits into this topic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-02-10MIPS: Fix __devinit __cpuinit confusion in cpu_cache_initDavid Daney2-3/+3
cpu_cache_init and the things it calls should all be __cpuinit instead of __devinit. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-01resources: introduce generic page_is_ram()Wu Fengguang1-1/+1
It's based on walk_system_ram_range(), for archs that don't have their own page_is_ram(). The static verions in MIPS and SCORE are also made global. v4: prefer plain 1 instead of PAGE_IS_RAM (H. Peter Anvin) v3: add comment (KAMEZAWA Hiroyuki) "AFAIK, this "System RAM" information has been used for kdump to grab valid memory area and seems good for the kernel itself." v2: add PAGE_IS_RAM macro (Américo Wang) Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Américo Wang <xiyou.wangcong@gmail.com> Cc: linux-mips@linux-mips.org Cc: Yinghai Lu <yinghai@kernel.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> LKML-Reference: <20100122081619.GA6431@localhost> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-12MIPS: Cleanup forgotten label_module_alloc in tlbex.cDavid Daney1-8/+0
commit c8af165342e83a4eb078c9607d29a7c399d30a53 (lmo) rsp. e0cc87f59490d7d62a8ab2a76498dc8a2b64927a (kernel.org) left label_module_alloc unused. Remove it now. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-11mm: make totalhigh_pages unsigned longAndreas Fenkart1-1/+1
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17MIPS: Sibyte: Use hweight8 instead of counting bitsAkinobu Mita1-5/+2
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/637/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Put PGD in C0_CONTEXT for 64-bit R2 processors.David Daney2-3/+27
Processors that support the mips64r2 ISA can in four instructions convert a shifted PGD pointer stored in the upper bits of c0_context into a usable pointer. By doing this we save a memory load and associated potential cache miss in the TLB exception handlers. Since the upper bits of c0_context were holding the CPU number, we move this to the upper bits of c0_xcontext which doesn't have enough bits to hold the PGD pointer, but has plenty for the CPU number. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Add drotr and dins instructions to uasm.David Daney2-3/+20
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-10vfs: Implement proper O_SYNC semanticsChristoph Hellwig1-1/+1
While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-13MIPS: Add DMA declare coherent memory supportYoichi Yuasa1-0/+7
The ohci-sm501 driver requires dma_declare_coherent_memory(). It is used by the driver's local memory allocation with dma_alloc_coherent(). Tested on TANBAC TB0287(VR4131 + SM501). [Ralf: Fixed reject in dma-default.c and removed the entire #if 0'ed block in dma-mapping.h instead of just the #if 0.] Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02MIPS: Fix machine check exception in kmap_coherent()Kevin Cernekee1-1/+5
On an SMP system with cache aliases, the following sequence of events may happen: 1) copy_user_highpage() runs on CPU0, invoking kmap_coherent() to create a temporary mapping in the fixmap region 2) copy_page() starts on CPU0 3) CPU1 sends CPU0 an IPI asking CPU0 to run local_r4k_flush_cache_page() 4) CPU0 takes the interrupt, interrupting copy_page() 5) local_r4k_flush_cache_page() on CPU0 calls kmap_coherent() again 6) The second invocation of kmap_coherent() on CPU0 tries to use the same fixmap virtual address that was being used by copy_user_highpage() 7) CPU0 throws a machine check exception for the TLB address conflict Fixed by creating an extra set of fixmap entries for use in interrupt handlers. This prevents fixmap VA conflicts between copy_user_highpage() running in user context, and local_r4k_flush_cache_page() invoked from an SMP IPI. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-30MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines.Kevin Cernekee1-0/+5
This extends commit a8ca8b64e3fdfec17679cba0ca5ce6e3ffed092d to cover MIPSxx-style board cache code. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-24cpumask: use mm_cpumask() wrapper: mipsRusty Russell1-1/+1
Makes code futureproof against the impending change to mm->cpu_vm_mask. It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-23kcore: use registerd physmem informationKAMEZAWA Hiroyuki1-2/+0
For /proc/kcore, each arch registers its memory range by kclist_add(). In usual, - range of physical memory - range of vmalloc area - text, etc... are registered but "range of physical memory" has some troubles. It doesn't updated at memory hotplug and it tend to include unnecessary memory holes. Now, /proc/iomem (kernel/resource.c) includes required physical memory range information and it's properly updated at memory hotplug. Then, it's good to avoid using its own code(duplicating information) and to rebuild kclist for physical memory based on /proc/iomem. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kcore: register vmalloc area in generic wayKAMEZAWA Hiroyuki1-3/+1
For /proc/kcore, vmalloc areas are registered per arch. But, all of them registers same range of [VMALLOC_START...VMALLOC_END) This patch unifies them. By this. archs which have no kclist_add() hooks can see vmalloc area correctly. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kcore: add kclist typesKAMEZAWA Hiroyuki1-3/+4
Presently, kclist_add() only eats start address and size as its arguments. Considering to make kclist dynamically reconfigulable, it's necessary to know which kclists are for System RAM and which are not. This patch add kclist types as KCORE_RAM KCORE_VMALLOC KCORE_TEXT KCORE_OTHER This "type" is used in a patch following this for detecting KCORE_RAM. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22arches: drop superfluous casts in nr_free_pages() callersGeert Uytterhoeven1-1/+1
Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()") modified nr_free_pages() to return 'unsigned long' instead of 'unsigned int'. This made the casts to 'unsigned long' in most callers superfluous, so remove them. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <zankel@tensilica.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-17MIPS: BCM63xx: Add Broadcom 63xx CPU definitions.Maxime Bizon1-0/+4
Todo: Nothing ever detects CPU_BCM6338 but the code tests for it anyway. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Don't corrupt page tables on vmalloc fault.David Daney1-2/+10
The code after the vmalloc_fault: label in do_page_fault() modifies user page tables, this is not correct for 64-bit kernels. For 64-bit kernels we should go straight to the no_context handler skipping vmalloc_fault. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 11:53:26 +0000