summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2019-12-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds17-27/+54
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I didn't get a batch in this weekend, so here's what we queued up last week and today. - A couple of defconfigs add back debugfs -- it used to be implicitly enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency") removed that. - The rest are mostly minor fixlets of the usual kind; some DT tweaks, a headerfile refactor that needs a build fix now, etc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: bcm: Add missing sentinel to bcm2711_compat[] ARM: shmobile: defconfig: Restore debugfs support bus: ti-sysc: Fix missing reset delay handling ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node ARM: mmp: include the correct cputype.h ARM: dts: am437x-gp/epos-evm: fix panel compatible arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: bcm283x: Fix critical trip point ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example ...
2019-12-16Merge tag 'arm-soc/for-5.5/soc-fixes' of ↵Olof Johansson1-0/+1
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine fixes for 5.5-rc1, please pull the following: - H. Nikolaus adds a missing sentinel entry to the BCM2711 machine descriptor compatible array which would make multiplatform kernels fail to boot * tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Add missing sentinel to bcm2711_compat[] Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'samsung-fixes-5.5' of ↵Olof Johansson1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.5 1. Restore debugfs support in exynos_defconfig (as now it is not selected as dependency of tracing). Debugfs is required by systemd and several tests. 2. Maintainers updates. * tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Restore debugfs support MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry MAINTAINERS: Update Lukasz Luba's email address Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'renesas-fixes-for-v5.5-tag1' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.5 - Restore debugfs support * tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-15ARM: bcm: Add missing sentinel to bcm2711_compat[]H. Nikolaus Schaller1-0/+1
commit 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") breaks boot of many other platforms (e.g. OMAP or i.MX6) if CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform config (e.g. omap2plus_defconfig). The symptom is that the OMAP based board does not show any activity beyond "Starting Kernel ..." even with earlycon. Reverting the mentioned commit makes it work again. The real fix is to add the missing NULL sentinel to the bcm2711_compat[] variable-length array. Fixes: 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-14Merge branch 'linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix another build problem for Wireguard without Crypto" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm/curve25519 - add arch-specific key generation function
2019-12-13Merge tag 'omap-for-v5.5/fixes-rc1-signed' of ↵Olof Johansson4-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.5-rc1 cycle This series of changes contains fixes for issues recently noticed: - The ti-sysc interconnect target module driver needs fixes for mstandby quirk handling and reset delay - We need to configure am335x-sancloud-bbe to use rgmii-id mode because of the phy changes done earlier - NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV - We are still relying on DEBUG_FS at least for PM configuration, let's add it back - We need to update compatible for am437x-gp/epos-evm because of the recent changes to use generic panels * tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing reset delay handling ARM: dts: am437x-gp/epos-evm: fix panel compatible ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-13ARM: shmobile: defconfig: Restore debugfs supportGeert Uytterhoeven1-0/+1
Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks booting Debian 9, as systemd needs debugfs: [FAILED] Failed to mount /sys/kernel/debug. See 'systemctl status sys-kernel-debug.mount' for details. [DEPEND] Dependency failed for Local File Systems. ... You are in emergGive root password for maintenance (or press Control-D to continue): Fix this by enabling CONFIG_DEBUG_FS explicitly. See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore debugfs support"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
2019-12-12Merge tag 'imx-fixes-5.5' of ↵Olof Johansson4-15/+27
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5: - Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board, so that SPI NOR device can be probed. - Fix power button of E60K02 board by removing LDORTC2 regulator. - A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs"). - A couple of fixes on LS1028A SoC TMU regarding to calibration data and reboot register configuration. - Fix a regression seen on imx6ul-evk board by marking always-on for the regulator that is shared by many peripherals. - Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig. * tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: e60k02: fix power button ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-12crypto: arm/curve25519 - add arch-specific key generation functionJason A. Donenfeld1-0/+7
Somehow this was forgotten when Zinc was being split into oddly shaped pieces, resulting in linker errors. The x86_64 glue has a specific key generation implementation, but the Arm one does not. However, it can still receive the NEON speedups by calling the ordinary DH function using the base point. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-12ARM: imx: Fix boot crash if ocotp is not foundLeonard Crestez1-1/+3
The imx_soc_device_init functions tries to fetch the ocotp regmap in order to soc serial number. If regmap fetch fails then a message is printed but regmap_read is called anyway and the system crashes. Failing to lookup ocotp regmap shouldn't be a fatal boot error so check that the pointer is valid. Only side-effect of ocotp lookup failure now is that serial number will be reported as all-zeros which is acceptable. Cc: stable@vger.kernel.org Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-12ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FSLeonard Crestez1-0/+1
This is currently off and that's not desirable: default imx config is meant to be generally useful for development and debugging. Running git bisect between v5.4 and v5.5-rc1 finds this started from commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Explicit CONFIG_DEBUG_FS=y was earlier removed by commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options") A very similar fix was required before: commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-12ARM: dts: imx6ul-evk: Fix peripheral regulatorLeonard Crestez1-6/+20
Many peripherals are affected by gpio5/2, not just sensors. One of those is ethernet phy so network boot is current broken. Fix by renaming reg_sensors and marking it as "always on". Also add a comment asking for careful testing if this is to be made dynamic in the future. The "peri_3v3" naming is similar to imx6sx-sdb and regulator-name is same string as in schematics (VPERI_3V3). Fixes: 09e2b1048954 ("ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11Merge tag 'arm-soc/for-5.5/devicetree-fixes' of ↵Olof Johansson4-6/+6
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for v5.5-rc1, please pull the following: - Nicolas fixes the SoC's dma-range property to cover the full 1GB aperture - Stefan fixes the critical temperature trip point to be set before the firmware performs thermal throttling - Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected #address-cells and #size-cells properties * tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix critical trip point ARM: dts: Cygnus: Fix MDIO node address/size cells ARM: dts: bcm2711: fix soc's node dma-ranges ARM: dts: BCM5301X: Fix MDIO node address/size cells Link: https://lore.kernel.org/r/20191210205850.12442-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: mmp: include the correct cputype.hArnd Bergmann1-1/+1
The file was moved, causing a build error: In file included from /git/arm-soc/arch/arm/mach-mmp/pxa168.c:28: arch/arm/mach-mmp/pxa168.h:22:10: fatal error: cputype.h: No such file or directory Include it from the new location. Link: https://lore.kernel.org/r/20191210203409.2875880-1-arnd@arndb.de Fixes: 32adcaa010fa ("ARM: mmp: move cputype.h to include/linux/soc/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: dts: am437x-gp/epos-evm: fix panel compatibleTomi Valkeinen2-2/+2
The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-11ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCsChristoph Niedermaier1-2/+2
After the commit 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") the kernel doesn't start on i.MX6ULL/ULZ SoC. Tested on next-20191205. For i.MX6ULL/ULZ the variable "ocotp_compat" is set to "fsl,imx6ul-ocotp", but with commit ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support") and commit f243bc821ee3 ("ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible") the value "fsl,imx6ull-ocotp" is already defined and set in device tree... By setting "ocotp_compat" to "fsl,imx6ull-ocotp" the kernel does boot. Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-10ARM: dts: bcm283x: Fix critical trip pointStefan Wahren1-1/+1
During definition of the CPU thermal zone of BCM283x SoC family there was a misunderstanding of the meaning "criticial trip point" and the thermal throttling range of the VideoCore firmware. The latter one takes effect when the core temperature is at least 85 degree celsius or higher So the current critical trip point doesn't make sense, because the thermal shutdown appears before the firmware has a chance to throttle the ARM core(s). Fix these unwanted shutdowns by increasing the critical trip point to a value which shouldn't be reached with working thermal throttling. Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-10ARM: omap2plus_defconfig: Add back DEBUG_FSTony Lindgren1-0/+1
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it at least for enabling deeper idle states for the SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10ARM: omap2plus_defconfig: enable NET_SWITCHDEVGrygorii Strashko1-1/+2
The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig. Fixes: 3727d259ddaf ("arm: omap2plus_defconfig: enable new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10ARM: dts: am335x-sancloud-bbe: fix phy modeMans Rullgard1-1/+1
The phy mode should be rgmii-id. For some reason, it used to work with rgmii-txid but doesn't any more. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-09ARM: dts: Cygnus: Fix MDIO node address/size cellsFlorian Fainelli1-2/+2
The MDIO node on Cygnus had an reversed #address-cells and #size-cells properties, correct those. Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY") Reported-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-09ARM: dts: bcm2711: fix soc's node dma-rangesNicolas Saenz Julienne1-1/+1
Raspberry Pi's firmware has a feature to select how much memory to reserve for its GPU called 'gpu_mem'. The possible values go from 16MB to 944MB, with a default of 64MB. This memory resides in the topmost part of the lower 1GB memory area and grows bigger expanding towards the begging of memory. It turns out that with low 'gpu_mem' values (16MB and 32MB) the size of the memory available to the system in the lower 1GB area can outgrow the interconnect's dma-range as its size was selected based on the maximum system memory available given the default gpu_mem configuration. This makes that memory slice unavailable for DMA. And may cause nasty kernel warnings if CMA happens to include it. Change soc's dma-ranges to really reflect it's HW limitation, which is being able to only DMA to the lower 1GB area. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-09ARM: exynos_defconfig: Restore debugfs supportMarek Szyprowski1-0/+1
Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which in turn had been selected by CONFIG_PERF_EVENTS and CONFIG_PROVE_LOCKING. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-09ARM: dts: BCM5301X: Fix MDIO node address/size cellsFlorian Fainelli1-2/+2
The MDIO node on BCM5301X had an reversed #address-cells and #size-cells properties, correct those, silencing checker warnings: .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected Reported-by: Simon Horman <simon.horman@netronome.com> Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-09ARM: vexpress: Set-up shared OPP table instead of individual for each CPUSudeep Holla1-1/+11
Currently we add individual copy of same OPP table for each CPU within the cluster. This is redundant and doesn't reflect the reality. We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init() anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online() ->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug operations. It also may cause issues when the vexpress_spc_cpufreq driver is built as a module. Since ve_spc_clk_init is built-in device initcall, we should be able to use the same topology_core_cpumask to set the opp sharing cpumask via dev_pm_opp_set_sharing_cpus and use the same later in the driver via dev_pm_opp_get_sharing_cpus. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-12-09ARM: dts: e60k02: fix power buttonAndreas Kemnade1-5/+0
The power button was only producing irqs, but no key events, Forced power down with long key press works, so probably only a short spike arrives at the SoC. Further investigation shows that LDORTC2 is off after boot of the vendor kernel. LDORTC2 is shared with a GPIO at the pmic which probably transfers the button press to the SoC. That regulator off at boot, so "regulator-boot-on" is definitively wrong. So remove that. Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probingStefan Roese1-1/+1
Without this "jedec,spi-nor" compatible property, probing of the SPI NOR does not work on the NXP i.MX6ULL EVK. Fix this by adding this compatible property to the DT. Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration") Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds3-5/+12
Pull ARM fixes from Russell King: - fix CPU topology setup for SCHED_MC case - fix VDSO regression * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC
2019-12-06Merge tag 'arm-soc/for-5.5/devicetree-part2' of ↵Olof Johansson2-0/+63
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains the second batch of changes for Broadcom ARM-based SoCs, please pull the following: - Nicolas declares a CMA area within the first 1GB of DRAM in order for it to be guaranteed to reside there, otherwise ARM64's memory initialization will pick up a CMA area within ZONE_DMA32 - Stefan adds the Device Tree node for the built-in Ethernet controller (GENET) on the Raspberry Pi 4 model B board * tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711-rpi-4: Enable GENET support ARM: dts: bcm2711: force CMA into first GB of memory Link: https://lore.kernel.org/r/20191118182931.11884-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'socfpga_update_for_v5.5' of ↵Olof Johansson1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA updates for v5.5 - Issue COLD reboot by default for SoCFPGA platforms * tag 'socfpga_update_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm: socfpga: execute cold reboot by default Link: https://lore.kernel.org/r/20191122182106.822-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of ↵Olof Johansson8-10/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Device tree fixes for omap variants for for v5.5 merge window This series of changes contains fixes for few SoC and board specific issues that would be good to have merged for v5.5-rc1: - Fix incorrect MMC card detection polarity for omap3-tao3530 - Fix wrong am57xx-beagle-x15 pinmux named states for eMMC - Fix dra7 cpsw mdio clock that causes wrong speed - Fix vcsi for droid4 so it won't get turned off after init - Fix rev and sysconfig register offsets for omap4 sgx so it can idle Then there are also two minor late changes to logicpd-torpedo-baseboard to configure 1-wire HDQ for battery stats, and remove out of date workaround comments no longer needed. * tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix sgx sysconfig register for omap4 ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs ARM: dts: dra7: fix cpsw mdio fck clock ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments ARM: dts: logicpd-torpedo-baseboard: Enable HDQ Link: https://lore.kernel.org/r/pull-1574870758-237468@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of ↵Olof Johansson1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few ti-sysc related fixes for v5.5 merge window Just few minor changes that can be merged when suitable, but would be good to have these in v5.5-rc1 to remove dependencies between branches for more changes later on in v5.6: - Add quirk handling for AESS (Audio Engine Sub System) - We want to drop the useless gptimer option for omap4 as there are local timers - A minor error path handling improvment for sysc_child_add_named_clock() that will make further patching a bit easier * tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock() ARM: OMAP2+: Drop useless gptimer option for omap4 bus: ti-sysc: Add module enable quirk for audio AESS Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06ARM: multi_v7_defconfig: Restore debugfs supportMarek Szyprowski via Linux.Kernel.Org1-0/+1
Commit fd7d58f0dbc3 ("ARM: multi_v7_defconfig: renormalize based on recent additions") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which were enabled by CONFIG_PERF_EVENTS. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCTVincenzo Frascino1-0/+3
__arch_get_hw_counter() should check clock_mode to see if it can access CNTVCT. With the conversion to unified vDSO this check has been left out. This causes on imx v6 and v7 (imx_v6_v7_defconfig) and other platforms to hang at boot during the execution of the init process as per below: [ 19.976852] Run /sbin/init as init process [ 20.044931] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Fix the problem verifying that clock_mode is set coherently before accessing CNTVCT. Investigated-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-12-06ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MCDietmar Eggemann2-5/+9
Commit ca74b316df96 ("arm: Use common cpu_topology structure and functions.") changed cpu_coregroup_mask() from the ARM32 specific implementation in arch/arm/include/asm/topology.h to the one shared with ARM64 and RISCV in drivers/base/arch_topology.c. Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug: ERROR: groups don't span domain->span It happens to CPUs of the cluster of the CPU which gets hot-plugged out on scheduler domain MC. Turns out that the shared cpu_coregroup_mask() requires that the hot-plugged CPU is removed from the core_sibling mask via remove_cpu_topology(). Otherwise the 'is core_sibling subset of cpumask_of_node()' doesn't work. In this case the task scheduler has to deal with cpumask_of_node instead of core_sibling which is wrong on scheduler domain MC. e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4 ^ should be: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4 Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the topology masks in case of a CPU hotplug out operation. At the same time tweak store_cpu_topology() slightly so it will call update_siblings_masks() in case of CPU hotplug in operation via secondary_start_kernel()->smp_store_cpu_info(). This aligns the ARM32 implementation with the ARM64 one. Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is necessary since some Arm32 defconfigs (aspeed_g5_defconfig, milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit # CONFIG_ARM_CPU_TOPOLOGY is not set w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-12-05ARM: defconfig: re-run savedefconfig on multi_v* configsOlof Johansson3-41/+27
This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05Merge mainline/master into arm/fixesOlof Johansson498-8923/+27440
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05Merge tag 'armsoc-defconfig' of ↵Linus Torvalds13-15/+83
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits) ARM: config: multi_v5: ASPEED SDHCI, SGPIO ARM: configs: multi_v7: ASPEED network, gpio, FSI ARM: config: aspeed-g4: Add MMC, and cleanup ARM: config: aspeed-g5: Add SGPIO and FSI drivers ARM: config: aspeed-g5: Enable 8250_DW quirks arm64: defconfig: Change CONFIG_AT803X_PHY from m to y ARM: shmobile: defconfig: Refresh for v5.4-rc1 arm64: defconfig: Enable R8A77961 SoC ARM: configs: sunxi: Enable MICREL_PHY arm64: defconfig: add new Allwinner crypto options ARM: configs: sunxi: add new Allwinner crypto options ARM: tegra: Enable Tegra VDE driver in tegra_defconfig ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052 arm64: defconfig: Enable configs for S32V234 arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module arm64: defconfig: Enable SMMU v3 PMCG arm64: defconfig: Enable HiSilicon ZIP controller arm64: defconfig: enable Altera GPIO controller ARM: multi_v7_defconfig: Enable audio support for stm32mp157 arm64: defconfig: enable rsu driver ...
2019-12-05Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds263-7138/+20144
Pull ARM Device-tree updates from Olof Johansson: "As always, the bulk of updates. Some of the news this cycle: New SoC descriptions: - Broadcom BCM2711 - Amlogic Meson A1 and G12 - Freescale S32V234 - Marvell Armada AP807/AP807-quad and CP115 - Realtek RTD1293 and RTD1296 - Rockchip RK3308 New boards and platforms: - Allwinner: NanoPi Duo2 - Amlogic: Ugoos am6 - Atmel at91: Overkiz Kizbox2/4 - Broadcom: RPi4, Luxul XWC-2000 - Marvell: New Espressobin flavor - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev - Renesas: Salvator-XS - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits) ARM: dts: logicpd-torpedo: Disable USB Host arm: dts: mt6323: add keys, power-controller, rtc and codec arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ...
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-12-05Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds63-547/+644
Pull ARM SoC platform updates from Olof Johansson: "Most of these are for MMP (seeing a bunch of cleanups and refactorings for the first time in a while), and for OMAP (a bunch of cleanups and added support for voltage controller on OMAP4430)" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() OMAP2: fixup doc comments in omap_device ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1 ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED ARM: imx: use generic function to exit coherency ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS ARM: s3c: Rename s5p_usb_phy functions ARM: s3c: Rename s3c64xx_spi_setname() function ARM: imx: Add serial number support for i.MX6/7 SoCs ARM: imx: Drop imx_anatop_usb_chrg_detect_disable() arm64: Introduce config for S32 ARM: hisi: drop useless depend on ARCH_MULTI_V7 arm64: realtek: Select reset controller ARM: shmobile: rcar-gen2: Drop legacy DT clock support ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize") MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support ...
2019-12-05ARM: pxa: Fix resource propertiesLinus Walleij1-3/+3
The conversion to properties changed one assignment and missed three other assignments in the same file, fix it up so the platform compiles. The bug was reported by a few build bots but noone noticed. I noticed it when making other changes to the PXA platforms. Link: https://lore.kernel.org/r/20191203104117.85517-1-linus.walleij@linaro.org Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 50ec88120ea1 ("can: mcp251x: get rid of legacy platform data") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-04arm: nommu: use pgtable-nopud instead of 4level-fixupMike Rapoport1-1/+1
The generic nommu implementation of page table manipulation takes care of folding of the upper levels and does not require fixups. Simply replace of include/asm-generic/4level-fixup.h with include/asm-generic/pgtable-nopud.h. Link: http://lkml.kernel.org/r/1572938135-31886-3-git-send-email-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Peter Rosin <peda@axentia.se> Cc: Richard Weinberger <richard@nod.at> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addrHuang Shijie1-1/+1
Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-03Merge tag 'tty-5.5-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit later in the merge window than normal as I wanted to make sure some last-minute patches applied to it were all sane. They seem to be :) There's a lot of little stuff in here, for the tty core, and for lots of serial drivers: - reverts of uartlite serial driver patches that were wrong - msm-serial driver fixes - serial core updates and fixes - tty core fixes - serial driver dma mapping api changes - lots of other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices" vcs: prevent write access to vcsu devices tty: vt: keyboard: reject invalid keycodes tty: don't crash in tty_init_dev when missing tty_port serial: stm32: fix clearing interrupt error flags tty: Fix Kconfig indentation, continued serial: serial_core: Perform NULL checks for break_ctl ops tty: remove unused argument from tty_open_by_driver() tty: Fix Kconfig indentation {tty: serial, nand: onenand}: samsung: rename to fix build warning serial: ifx6x60: add missed pm_runtime_disable serial: pl011: Fix DMA ->flush_buffer() Revert "serial-uartlite: Move the uart register" Revert "serial-uartlite: Add get serial id if not provided" Revert "serial-uartlite: Do not use static struct uart_driver out of probe()" Revert "serial-uartlite: Add runtime support" Revert "serial-uartlite: Change logic how console_port is setup" Revert "serial-uartlite: Use allocated structure instead of static ones" tty: serial: msm_serial: Use dma_request_chan() directly for channel request tty: serial: tegra: Use dma_request_chan() directly for channel request ...
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
2019-12-02Merge branch 'linus' of ↵Linus Torvalds3-15/+25
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix build error in crypto lib code when crypto API is off - Fix NULL/error check in hisilicon - Fix Kconfig-related build error in talitos * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon - fix a NULL vs IS_ERR() bug in sec_create_qp_ctx() crypto: talitos - Fix build error by selecting LIB_DES crypto: arch - conditionalize crypto api in arch glue for lib code
2019-12-02Merge tag 'devicetree-for-5.5' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...