summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ixp4xx
AgeCommit message (Collapse)AuthorFilesLines
2017-09-01Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/nextBoris Brezillon1-1/+1
From Boris: " This pull request contains the following core changes: * Fix memory leaks in the core * Remove unused NAND locking support * Rename nand.h into rawnand.h (preparing support for spi NANDs) * Use NAND_MAX_ID_LEN where appropriate * Fix support for 20nm Hynix chips * Fix support for Samsung and Hynix SLC NANDs and the following driver changes: * Various cleanup, improvements and fixes in the qcom driver * Fixes for bugs detected by various static code analysis tools * Fix mxc ooblayout definition * Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers * Request the reset line in exclusive mode in the sunxi driver * Fix a build error in the orion-nand driver when compiled for ARMv4 * Allow 64-bit mvebu platforms to select the PXA3XX driver "
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon1-1/+1
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-07-27ARM: ixp4xx: fix ioport_unmap definitionArnd Bergmann1-2/+9
An empty macro definition can cause unexpected behavior, in case of the ixp4xx ioport_unmap, we get two warnings: drivers/net/wireless/marvell/libertas/if_cs.c: In function 'if_cs_release': drivers/net/wireless/marvell/libertas/if_cs.c:826:3: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] ioport_unmap(card->iobase); drivers/vfio/pci/vfio_pci_rdwr.c: In function 'vfio_pci_vga_rw': drivers/vfio/pci/vfio_pci_rdwr.c:230:15: error: the omitted middle operand in ?: will always be 'true', suggest explicit middle operand [-Werror=parentheses] is_ioport ? ioport_unmap(iomem) : iounmap(iomem); This uses an inline function to define the macro in a safer way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-07-27ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l}Arnd Bergmann1-6/+17
ixp4xx defines the arguments to its __indirect_writesb() and other functions as pointers to fixed-size data. This is not necessarily wrong, and it works most of the time, but it causes warnings in at least one driver: drivers/net/ethernet/smsc/smc91x.c: In function 'smc_rcv': drivers/net/ethernet/smsc/smc91x.c:495:21: error: passing argument 2 of '__indirect_readsw' from incompatible pointer type [-Werror=incompatible-pointer-types] SMC_PULL_DATA(lp, data, packet_len - 4); All other definitions of the same functions pass void pointers, so doing the same here avoids the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-05-08scripts/spelling.txt: add regsiter -> register spelling mistakeStephen Boyd1-2/+2
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-1/+1
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-26ARM: ixp4xx: drop duplicate header gpio.hGeliang Tang1-1/+0
Drop duplicate header gpio.h from dsmg600-setup.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-03-17Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
2016-03-04usb: gadget: pxa25x_udc: move register definitions from archArnd Bergmann1-198/+0
ixp4xx and pxa25x both use this driver and provide a slightly different set of register definitions for it. Aside from that, the definition in the ixp4xx-regs.h header conflicts with the on in the pxa27x device driver when compile-testing that: In file included from ../drivers/usb/gadget/udc/pxa27x_udc.c:37:0: ../drivers/usb/gadget/udc/pxa27x_udc.h:26:0: warning: "UDCCR" redefined #define UDCCR 0x0000 /* UDC Control Register */ ^ In file included from ../arch/arm/mach-ixp4xx/include/mach/hardware.h:27:0, from ../arch/arm/mach-ixp4xx/include/mach/io.h:18, from ../arch/arm/include/asm/io.h:194, from ../include/linux/io.h:25, from ../include/linux/irq.h:24, from ../drivers/usb/gadget/udc/pxa27x_udc.c:23: ../arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h:415:0: note: this is the location of the previous definition #define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) This addresses both issues by moving all the definitions into the pxa25x_udc driver itself. It turns out the only difference between them was 'UDCCS_IO_ROF', and that could well be a mistake when it was incorrectly copied from pxa25x to ixp4xx. Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-19ARM: ixp4xx: switch to gpiochip_add_data()Linus Walleij1-2/+2
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-13Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtdLinus Torvalds1-3/+3
Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
2016-01-07ARM: make use of nand_set/get_controller_data() helpersBoris BREZILLON1-2/+2
New helpers have been added to avoid directly accessing chip->field. Use them where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-07ARM: nand: make use of mtd_to_nand() where appropriateBoris BREZILLON1-1/+1
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all ARM specific implementations to use this helper. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-01ARM: ixp4xx: fix read{b,w,l} return typesArnd Bergmann1-6/+6
On ixp4xx, the readl() function returns an 'unsigned long' output when indirect I/O is used. This is unlike any other platform, and it causes lots of harmless compiler warnings, such as: drivers/ata/libahci.c: In function 'ahci_show_host_version': drivers/ata/libahci.c:254:22: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int' [-Wformat=] drivers/block/mtip32xx/mtip32xx.c: In function 'mtip_hw_read_registers': drivers/block/mtip32xx/mtip32xx.c:2602:31: warning: format '%X' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int' [-Wformat=] drivers/block/cciss.c: In function 'print_cfg_table': drivers/block/cciss.c:3845:25: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] This changes all six of the ixp4xx specific I/O read functions to return the same types that we have in the normal asm/io.h, to avoid the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2015-07-28ARM: kill off set_irq_flags usageRob Herring1-1/+1
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17ARM/ixp4xx/timer: Migrate to new 'set-state' interfaceViresh Kumar1-28/+40
Migrate ixp4xx driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. NOTE: ixp4xx_set_{oneshot|periodic} don't perform read operation on 'IXP4XX_OSRT1' register anymore. Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-05-14ARM: Show proper respect for Heinrich Hertz by using the correct unit for ↵Russell King1-1/+1
frequency The SI unit of frequency is Hertz, named after Heinrich Hertz, and is given the symbol "Hz" to denote this. "hz" is not the unit of frequency, and is in fact meaningless. Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz' contribution to the modern world. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-02-18ARM: ixp4xx: fix {in,out}s{bwl} data typesArnd Bergmann1-6/+13
Most platforms use void pointer arguments in these functions, but ixp4xx does not, which triggers lots of warnings in device drivers like: net/ethernet/8390/ne2k-pci.c: In function 'ne2k_pci_get_8390_hdr': net/ethernet/8390/ne2k-pci.c:503:3: warning: passing argument 2 of 'insw' from incompatible pointer type insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); ^ In file included from include/asm/io.h:214:0, from /git/arm-soc/include/linux/io.h:22, from /git/arm-soc/include/linux/pci.h:31, from net/ethernet/8390/ne2k-pci.c:48: mach-ixp4xx/include/mach/io.h:316:91: note: expected 'u16 *' but argument is of type 'struct e8390_pkt_hdr *' static inline void insw(u32 io_addr, u16 *vaddr, u32 count) Fixing the drivers seems hopeless, so this changes the ixp4xx code to do the same as the others to avoid the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org>
2014-11-10ARM: ixp4xx: Properly override I/O accessorsThierry Reding1-0/+12
In order to override accessors properly they must be #define'd so that subsequent generic headers (the one for ARM and finally the architecture independent one) can properly detect it. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-10ARM: ixp4xx: Fix build with IXP4XX_INDIRECT_PCIArnd Bergmann2-5/+13
Provide *_relaxed() accessors and make sure to pass the volatile void __iomem * to accessors rather than the value cast to a u32. This allows ixp4xx to build with IXP4XX_INDIRECT_PCI enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds2-18/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-05Merge tag 'fixes-non-critical-3.15' of ↵Linus Torvalds5-64/+84
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
2014-03-26IXP4xx: Fix DMA masks.Krzysztof Halasa2-44/+56
Now, devices will have 32-bit default DMA masks (0xFFFFFFFF) as per DMA API. Fixes: $ ifconfig eth0 up net eth0: coherent DMA mask is unset $ ifconfig hdlc0 up net hdlc0: coherent DMA mask is unset Also fixes a cosmetic off-by-one bug which caused DMA transfers ending exactly on the 64 MiB boundary to go through dmabounce unnecessarily. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Tested-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-26Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"Arnd Bergmann2-12/+9
This reverts commit bfdad565ae0a61ac943974b8ae61ec0ed55ceb04. The patch turned out to be incorrect, and will be replaced with a correct patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-26IXP4xx: Fix Goramo Multilink GPIO conversion.Krzysztof Halasa1-17/+26
Commit 098e30f6558f8 "ARM: ixp4xx: stop broadcasting the custom GPIO API" changed the internal gpio code of ixp4xx to be accessible only from common.c, but unfortunately that broke the Goramo MultiLink code, which uses this API. arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'set_scl': arch/arm/mach-ixp4xx/goramo_mlr.c:82: error: implicit declaration of function 'gpio_line_set' arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'output_control': arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: implicit declaration of function 'gpio_line_config' arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: 'IXP4XX_GPIO_OUT' undeclared arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'hss_dcd_irq': arch/arm/mach-ixp4xx/goramo_mlr.c:155: error: implicit declaration of function 'gpio_line_get' arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init': arch/arm/mach-ixp4xx/goramo_mlr.c:416: error: 'IXP4XX_GPIO_OUT' undeclared arch/arm/mach-ixp4xx/goramo_mlr.c:421: error: 'IXP4XX_GPIO_IN' undeclared Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-26Revert "ARM: ixp4xx: fix gpio rework"Arnd Bergmann2-10/+3
This reverts commit 48ba81f6fdb7580a5c474da1b14a338e1358e6ab. A better fix was sent by Krzysztof Halasa. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-22Merge branch 'randconfig-fixes' into next/fixes-non-criticalArnd Bergmann4-6/+12
This is the first batch of a much longer series of bug fixes found during randconfig testing. This part are all the simple patches that are applicable for the arm-soc tree, while most other fixes will likely go through other maintainers. * randconfig-fixes: (50 commits) ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ARM: s3c24xx: osiris dvs needs tps65010 ARM: s3c24xx: fix gta02 build error ARM: s3c24xx: MINI2440 needs I2C for EEPROM_AT24 ARM: integrator: only select pl01x if TTY is enabled ARM: realview: fix sparsemem build ARM: footbridge: make screen_info setup conditional ARM: footbridge: fix build with PCI disabled ARM: footbridge: don't build floppy code for addin mode ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21ARM: ixp4xx: fix gpio reworkArnd Bergmann2-3/+10
Commit 098e30f6558f8 "ARM: ixp4xx: stop broadcasting the custom GPIO API" changed the internal gpio code of ixp4xx to be accessible only from common.c, but unfortunately that broke the Goramo MultiLink code, which uses this API. This tries to restore the previous state without exposing the API globally again. A better solution might be needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Imre Kaloz <kaloz@openwrt.org>
2014-03-21ARM: ixp4xx: avoid use of PCIBIOS_MIN_MEM in io.hArnd Bergmann1-1/+2
When using CONFIG_IXP4XX_INDIRECT_PCI, we run into a recursive header file dependency between mach/io.h and asm/pci.h, resulting in a build failure: mach-ixp4xx/include/mach/io.h: In function 'is_pci_memory': mach-ixp4xx/include/mach/io.h:53:18: error: 'PCIBIOS_MIN_MEM' undeclared (first use in this function) return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF); ^ mach-ixp4xx/include/mach/io.h:53:18: note: each undeclared identifier is reported only once for each function it appears in We can work around this by referencing the pcibios_min_mem variable directly through an extern declaration, rather than using the macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl>
2014-03-21ARM: ixp4xx/omixp: always include linux/leds.hArnd Bergmann1-2/+0
The omixp board code unconditionally defines a gpio-led device, but for some reason includes the header file for this only if CONFIG_LEDS_CLASS is enabled, causing a build error otherwise. Removing the #ifdef fixes the build error with no downsides whatsoever. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl>
2014-03-18ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementationSimon Kågström2-9/+12
Non-PCI devices can use the entire 32-bit range, PCI dittos are limited to the first 64MiB. Also actually setup coherent_dma_mask. The patch has been verified on a board with 128MiB memory, one ipx4xx_eth device and a e100 PCI device. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-12ARM: 7998/1: IXP4xx: remove deprecated IRQF_DISABLEDMichael Opdenacker5-13/+7
This patch removes the use of the IRQF_DISABLED flag from code in arch/arm/mach-ixp4xx It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson2-18/+12
next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-18ARM: ixp4xx: fix timer latch calculationUwe Kleine-König1-1/+9
In commit f0402f9b4711 ("ARM: ixp4xx: stop using <mach/timex.h>") I didn't intend to implement a functional change, but as Olof noticed I failed---at least a bit. Before this commit the following was used to determine the latch value used: #define IXP4XX_TIMER_FREQ 66666000 #define CLOCK_TICK_RATE \ (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) The complicated calculation was done "b/c the timer register ignores the bottom 2 bits of the LATCH value." With HZ=100 CLOCK_TICK_RATE used to calculate to 66666100 and so LATCH to 666661. In ixp4xx_set_mode the term LATCH & ~IXP4XX_OST_RELOAD_MASK was used to write to the relevant register (with IXP4XX_OST_RELOAD_MASK being 3) and so effectively 666660 was used. In commit f0402f9b4711 I translated that to: #define IXP4XX_TIMER_FREQ 66666000 #define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, HZ) which results in the same register writes, but still doesn't bear in mind that the two least significant bits cannot be specified (which is relevant only when HZ or IXP4XX_TIMER_FREQ are changed). Instead of reverting back to the old approach use a more obvious and also more correct way to calculate LATCH. (Regarding the more correct claim: With IXP4XX_TIMER_FREQ == 66665999, the old code resulted in LATCH = 666657 corresponding to a cycle time of 0.009999940149400597 seconds (error: -6.0e-8 s) while the new approach results in LATCH = 666660 and so a cycle time of 0.010000000150001503 seconds (error: 1.5e-10 s).) Fixes: f0402f9b4711 ("ARM: ixp4xx: stop using <mach/timex.h>") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2014-01-23Merge tag 'soc-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-02IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()Krzysztof Hałasa1-1/+1
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-20ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, tooUwe Kleine-König1-16/+0
While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform. While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-20ARM: ixp4xx: stop using <mach/timex.h>Uwe Kleine-König1-2/+4
The only user of symbols defined in ixp4xx's <mach/timex.h> is common.c. Fix that one up by moving the used #define into common.c directly and add a local substitute for the global define LATCH which uses CLOCK_TICK_RATE. This makes ixp4xx not to be a bar to dropping support for <mach/timex.h>. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-11arm/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang1-3/+3
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-06Merge branch 'soc/sched_clock' into next/socKevin Hilman1-2/+2
From Stephen Boyd: * soc/sched_clock: ARM: versatile: Switch to sched_clock_register() ARM: orion: Switch to sched_clock_register() ARM: OMAP: Switch to sched_clock_register() ARM: iop: Switch to sched_clock_register() ARM: u300: Switch to sched_clock_register() ARM: sa1100: Switch to sched_clock_register() ARM: pxa: Switch to sched_clock_register() ARM: OMAP2+: Switch to sched_clock_register() ARM: OMAP1: Switch to sched_clock_register() ARM: msm: Switch to sched_clock_register() ARM: mmp: Switch to sched_clock_register() ARM: IXP4xx: Switch to sched_clock_register() ARM: integrator: Switch to sched_clock_register() ARM: imx: Switch to sched_clock_register() ARM: davinci: Switch to sched_clock_register() ARM: clps711x: Switch to sched_clock_register() ARM: timer-sp: Switch to sched_clock_register() Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-21ARM: IXP4xx: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-14Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-4/+0
Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-10-19ARM: fix ARCH_IXP4xx usage of ARCH_SUPPORTS_BIG_ENDIANBen Dooks1-4/+0
The Kconfig for arch/arm/mach-ixp4xx has a local definition of ARCH_SUPPORTS_BIG_ENDIAN which could be used elsewhere. This means that if IXP4xx is selected and this symbol is selected eleswhere then an warning is produced. Clean the following error up by making the symbol be selected by the main ARCH_IXP4XX definition and have a common definition in arch/arm/mm/Kconfig warning: (ARCH_xxx) selects ARCH_SUPPORTS_BIG_ENDIAN which has unmet direct dependencies (ARCH_IXP4XX) warning: (ARCH_xxx) selects ARCH_SUPPORTS_BIG_ENDIAN which has unmet direct dependencies (ARCH_IXP4XX) Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-09-27ARM: ixp4xx: stop broadcasting the custom GPIO APILinus Walleij2-39/+38
Now that these custom GPIO accessors are only used from the gpio chip in this machine, move the code out of the include file and right next to the gpiochip implementation. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27ARM: ixp4: delete irq_to_gpioLinus Walleij1-11/+0
This dangerous function is not used in the kernel, so let's just delete it. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27ARM: ixp4xx: convert remaining users to use gpiolibLinus Walleij4-54/+85
A few call sites inside mach-ixp4xx were still using the custom ixp4xx GPIO API with gpio_line_* accessors, convert all these to use the standard gpiolib functions instead. Also attempt to request and label all GPIOs before use. Move the GPIO requests to per-machine device_initcalls() so we are not dependent on the GPIO chip to be available at machine_init time. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-25ARM: debug: move 8250 debug include into arch/arm/include/debug/Russell King1-12/+0
Now that the 8250 debug include can stand alone without requiring platforms to provide any macros, move it into the debug directory so it can be directly included. This allows us to get rid of a lot of debug-macros include files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25ARM: debug: provide 8250 debug uart phys/virt address configuration optionsRussell King1-13/+0
Move the definition of the UART register addresses out of the platform specific header file into the Kconfig files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 09:40:11 +0000