summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91
AgeCommit message (Collapse)AuthorFilesLines
2014-09-05ARM: at91: rm9200: fix clock registrationAlexandre Belloni1-1/+10
Actually register clocks from device tree when using the common clock framework. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: add at91 to function name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-08Merge tag 'gpio-v3.17-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO update from Linus Walleij: "This is the bulk of GPIO changes for the v3.17 development cycle, and this time we got a lot of action going on and it will continue: - The core GPIO library implementation has been split up in three different files: - gpiolib.c for the latest and greatest and shiny GPIO library code using GPIO descriptors only - gpiolib-legacy.c for the old integer number space API that we are phasing out gradually - gpiolib-sysfs.c for the sysfs interface that we are not entirely happy with, but has to live on for ABI compatibility - Add a flags argument to *gpiod_get* functions, with some backward-compatibility macros to ease transitions. We should have had the flags there from the beginning it seems, now we need to clean up the mess. There is a plan on how to move forward here devised by Alexandre Courbot and Mark Brown - Split off a special <linux/gpio/machine.h> header for the board gpio table registration, as per example from the regulator subsystem - Start to kill off the return value from gpiochip_remove() by removing the __must_check attribute and removing all checks inside the drivers/gpio directory. The rationale is: well what were we supposed to do if there is an error code? Not much: print an error message. And gpiolib already does that. So make this function return void eventually - Some cleanups of hairy gpiolib code, make some functions not to be used outside the library private and make sure they are not exported, remove gpiod_lock/unlock_as_irq() as the existing function is for driver-internal use and fine as it is, delete gpio_ensure_requested() as it is not meaningful anymore - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function calls, which is logical since this is already supported when referencing GPIOs from e.g. device trees - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib irqchip helpers cutting down on GPIO irqchip boilerplate a bit more - New driver for the Zynq GPIO block - The usual incremental improvements around a bunch of drivers - Janitorial syntactic and semantic cleanups by Jingoo Han, and Rickard Strandqvist especially" * tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits) MAINTAINERS: update GPIO include files gpio: add missing includes in machine.h gpio: add flags argument to gpiod_get*() functions MAINTAINERS: Update Samsung pin control entry gpio / ACPI: Move event handling registration to gpiolib irqchip helpers gpio: lynxpoint: Convert to use gpiolib irqchip gpio: split gpiod board registration into machine header gpio: remove gpio_ensure_requested() gpio: remove useless check in gpiolib_sysfs_init() gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc gpio: move gpio_ensure_requested() into legacy C file gpio: remove gpiod_lock/unlock_as_irq() gpio: make gpiochip_get_desc() gpiolib-private gpio: simplify gpiochip_export() gpio: remove export of private of_get_named_gpio_flags() gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions gpio: zynq: Clear pending interrupt when enabling a IRQ gpio: drop retval check enforcing from gpiochip_remove() gpio: remove all usage of gpio_remove retval in driver/gpio devicetree: Add Zynq GPIO devicetree bindings documentation ...
2014-08-08Merge tag 'drivers-for-3.17' of ↵Linus Torvalds10-82/+89
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
2014-07-28gpio: split gpiod board registration into machine headerLinus Walleij1-1/+1
As per example from the regulator subsystem: put all defines and functions related to registering board info for GPIO descriptors into a separate <linux/gpio/machine.h> header. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09ARM: at91: move at91sam9263 SoC to the CCFAlexandre Belloni1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9263 SoC support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clock implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: prepare common clk transition for sam9263Alexandre Belloni1-1/+5
Enclose the sam9263 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: move at91sam9g45 SoC to the CCFAlexandre Belloni1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9g45 SoC support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clock implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: prepare common clk transition for sam9g45Alexandre Belloni1-1/+5
Enclose the sam9g45 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: move at91sam9260 SoCs to the CCFAlexandre Belloni1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9260 SoCs support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: prepare common clk transition for sam9260Alexandre Belloni1-1/+5
Enclose the sam9260 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: move at91rm9200 SoC to the CCFAlexandre Belloni1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91rm9200 SoC support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: prepare common clk transition for rm9200Alexandre Belloni1-1/+5
Enclose the rm9200 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: remove useless at91_pwm_leds()Alexandre Belloni2-38/+0
Now that all at91 boards using leds-atmel-pwm switched to leds-pwm, the at91_pwm_leds() function is not used anymore. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: at91sam9rl: switch to generic PWM frameworkAlexandre Belloni2-9/+3
Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: sam9263ek: use generic leds_pwm driverAlexandre Belloni1-8/+47
Switch to the generic leds_pwm driver instead of leds-atmel-pwm. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: at91sam9263: switch to generic PWM frameworkAlexandre Belloni2-9/+3
Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: sam9m10g45ek: use generic leds_pwm driverAlexandre Belloni1-9/+33
Switch to the generic leds_pwm driver instead of leds-atmel-pwm. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91: at91sam9g45: switch to generic PWM frameworkAlexandre Belloni2-9/+3
Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-06ARM: at91: fix at91_sysirq_mask_rtc for sam9x5 SoCsBoris BREZILLON1-9/+13
sam9x5 SoCs have the following errata: "RTC: Interrupt Mask Register cannot be used Interrupt Mask Register read always returns 0." Hence we should not rely on what IMR claims about already masked IRQs and just disable all IRQs. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Bryan Evenson <bevenson@melinkcorp.com> Reviewed-by: Johan Hovold <johan@hovold.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Bryan Evenson <bevenson@melinkcorp.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Roszko <mark.roszko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-03Merge tag 'tty-3.16-rc1' of ↵Linus Torvalds7-31/+23
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next Pull tty/serial driver updates from Greg KH: "Here is the big tty / serial driver pull request for 3.16-rc1. A variety of different serial driver fixes and updates and additions, nothing huge, and no real major core tty changes at all. All have been in linux-next for a while" * tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits) Revert "serial: imx: remove the DMA wait queue" serial: kgdb_nmi: Improve console integration with KDB I/O serial: kgdb_nmi: Switch from tasklets to real timers serial: kgdb_nmi: Use container_of() to locate private data serial: cpm_uart: No LF conversion in put_poll_char() serial: sirf: Fix compilation failure console: Remove superfluous readonly check console: Use explicit pointer type for vc_uni_pagedir* fields vgacon: Fix & cleanup refcounting ARM: tty: Move HVC DCC assembly to arch/arm tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick() drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc vt: emulate 8- and 24-bit colour codes. printk/of_serial: fix serial console cessation part way through boot. serial: 8250_dma: check the result of TX buffer mapping serial: uart: add hw flow control support configuration tty/serial: at91: add interrupts for modem control lines tty/serial: at91: use mctrl_gpio helpers tty/serial: Add GPIOLIB helpers for controlling modem lines ARM: at91: gpio: implement get_direction ...
2014-06-02Merge tag 'dt-for-3.16' of ↵Linus Torvalds3-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
2014-06-02Merge tag 'soc-for-3.16' of ↵Linus Torvalds45-239/+136
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
2014-05-28tty/serial: at91: use mctrl_gpio helpersRichard Genoud6-31/+10
On sam9x5, dedicated CTS (and RTS) pins are unusable together with the LCDC, the EMAC, or the MMC because they share the same line. Moreover, the USART controller doesn't handle DTR/DSR/DCD/RI signals, so we have to control them via GPIO. This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28ARM: at91: gpio: implement get_directionRichard Genoud1-0/+13
This is needed for gpiod_get_direction(). Otherwise, it returns -EINVAL. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23Merge tag 'at91-fixes2' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann1-4/+4
Second 3.15 fixes for AT91 - two fixes concerning iio ADC triggers for at91sam9260 and at91sam9g20 one for the "device" file, the other for the DT. * tag 'at91-fixes2' of git://github.com/at91linux/linux-at91: ARM: at91: sam9260: fix compilation issues ARM: at91/dt: sam9260: correct external trigger value Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-22ARM: at91: sam9260: fix compilation issuesAlexandre Belloni1-4/+4
Use the hexadecimal values for the triggers to match what is done for the device tree. This also fixes compilation issues as the defines have been moved elsewhere. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-22ARM: at91: move sam9n12 SoC to the CCFBoris BREZILLON1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting sam9n12 SoC support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-22ARM: at91: prepare common clk transition for sam9n12 SoCBoris BREZILLON1-1/+5
This patch encloses sam9n12 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-22ARM: at91: move sam9x5 SoCs to the CCFBoris BREZILLON1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting sam9x5 SoCs support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-22ARM: at91: prepare common clk transition for sam9x5 SoCsBoris BREZILLON1-1/+5
This patch encloses sam9x5 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: remove atmel_tsadcc platform_dataAlexandre Belloni1-3/+0
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9rl: switch from atmel_tsadcc to at91_adcAlexandre Belloni2-62/+0
atmel_tsadcc is not allowing to use the remaining ADC channels while at91_adc does. Completely switch to at91_adc and remove the tsadcc platform_data for at91sam9rl and at91sam9rl based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9g45: switch from atmel_tsadcc to at91_adcAlexandre Belloni2-65/+3
atmel_tsadcc is not allowing to use the remaining ADC channels while at91_adc does. Completely switch to at91_adc and remove the tsadcc platform_data for at91sam9g45 and at91sam9g45 based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9rlek add touchscreen support through at91_adcAlexandre Belloni1-0/+14
at91_adc now supports reading a touchscreen for ADCs without a TSMR register. Enable touchscreen support through at91_adc. This allows to use both a touchscreen and the remaining ADC channel at the same time. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9rl: add at91_adc to support adc and touchscreenAlexandre Belloni2-0/+92
The ADC clock needs to be defined to enable the at91_adc driver. It is defined to the same speed that is used for atmel_tsadcc. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07iio: adc: at91: remove unused include from include/machAlexandre Belloni1-120/+0
That include file is now only used by the at91_adc driver, remove it from include/mach for better driver separation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9m10g45ek: Add touchscreen support through at91_adcAlexandre Belloni2-1/+2
at91_adc now supports reading a touchscreen for ADCs without a TSMR register. Enable touchscreen support through at91_adc. This allows to use both a touchscreen and the remaining ADC channel at the same time. Also, lower the clock for the ADC as it allows to have more stable reads and this is the speed used by atmel_tsadcc. It lowers the maximum throughput rate from 440000 samples per second to 12958 samples per second. It shouldn't be an issue as the CPU is not able to keep up reading samples at that frequency. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07iio: adc: at91_adc: Add support for touchscreens without TSMRAlexandre Belloni1-0/+13
Old ADCs, as present on the sam9rl and the sam9g45 don't have a TSMR register and the touchscreen support should be handled differently. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9260: remove unused platform_dataAlexandre Belloni1-10/+0
num_channels and registers are not used anymore since they are defined inside the at91_adc driver and assigned by matching the id_table. Also, remove the mach/at91_adc.h include that is not necessary anymore. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: sam9g45: remove unused platform_dataAlexandre Belloni1-10/+0
num_channels and registers are not used anymore since they are defined inside the at91_adc driver and assigned by matching the id_table. Also, remove the mach/at91_adc.h include that is not necessary anymore. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91: localize GPIO headerLinus Walleij41-12/+56
This moves the <mach/gpio.h> header in the AT91 platform down into the machine directory and removes the reliance on MACH_NEED_GPIO_H from the AT91. This does not move the platform to GENERIC_GPIO but localize the remaining work to be done for this to the mach-at91 folder. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [nicolas.ferre@atmel.com: adapt to newer kernel, add rsi-ews board] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-22Merge tag 'iio-fixes-for-3.15a' of ↵Greg Kroah-Hartman2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First found of IIO fixes for the 3.15 cycle. * Fix the platform data support for the at91 adc driver. * A couple of related follow up patches get the support working again for at91sam9260 and at91sam9g45 as the earlier patch results in a device name change. * A default timer value in the at91 adc driver was bonkers. Make it sane. * Fix incorrect reporting of the integration time for the cm32181 light sensor * Fix a missing break in the ad2s1200 driver which would have give a false error return. * Make sure buffer scan mask queries from userspace return 0/1 rather than a fairly random value depending on their implementation of test_bit * Fix leak of the i2c client and a null pointer dereference in the cm36651 driver. * Fix a build warning on avr32 for the mxs-lradc (not exactly a critical combination - but the issue was real).
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds26-46/+115
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-03ARM: at91: fix a typoArnd Bergmann1-1/+1
My recent commit 871336a9379 "ARM: at91: fix broken "if () else" statement" introduced a typo because of a last-minute fixup. This adds the missing closing parenthesis. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21ARM: at91: sama5 always uses DTArnd Bergmann1-0/+1
It makes no sense for sama5 support to be enabled if we don't also enable USE_OF. Making this automatic in Kconfig avoids a possible randconfig conflict between the old and new clock support code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
2014-03-21ARM: at91: fix broken "if () else" statementArnd Bergmann1-5/+1
If CONFIG_PATA_AT91 is disabled, the code in at91_add_device_cf is turned into invalid C statements due to the lack of an expression before the 'else' clause. This moves the first half of the condition inside of the #ifdef, which seems to be what the author intended. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
2014-03-21ARM: at91: export sam9_smc interfacesArnd Bergmann1-0/+3
The pata_at91 driver uses interfaces defined in the sam9_smc platform code. Since the pata driver can be a loadable module, we have to export those symbols in order to link cleanly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
2014-03-21ARM: at91: don't provide dt init code for at91x40Arnd Bergmann1-1/+1
at91x40 has no support for device tree, but Kconfig allows us to enable CONFIG_OF anyway, causing a link error in the at91 reset controller initialization. The easiest fix is to adapt the existing #ifdef to omit the broken code on at91x40 where it is never called anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
2014-03-21ARM: at91: split out at91x40 into a top-level optionArnd Bergmann2-11/+19
at91x40 is different from all the other at91 machines, and it is impossible to build a kernel that works on both this SoC and any of the others, even though it is possible to build a noMMU kernel for any at91 machine. By turning at91x40 into a separate top-level option, we explicitly forbid enabling invalid configurations that include mutually exclusive machines. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
2014-03-17Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into ↵Arnd Bergmann8-6/+60
next/cleanup Merge "First batch of AT91 cleanup for 3.15" from Nicolas Ferre: - some updates on the defconfig front - two SoCs converted to Device Tree: sam9261 and sam9rl (with use of CCF!) - a little PWM clock update that goes on top of this * tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ARM: at91/defconfig: remove useless configuration in at91sam9260_9g20_defconfig ARM: at91/defconfig: refresh at91sam9rl_defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 21:03:30 +0000