summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2012-07-27ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex NetJosh Coombs1-0/+49
This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Add basic device tree support for QNAP TS219.Andrew Lunn3-0/+116
The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn1-0/+7
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn1-0/+6
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: Orion: Add arch support needed for I2C via DT.Andrew Lunn1-0/+10
The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
2012-07-27ARM: kirkwood: use devicetree for orion-spiMichael Walle1-0/+10
Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
2012-07-27ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn1-0/+27
Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds7-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A mixed bag of fixes, some for merge window fallout (tegra, MXS), and a short series of fixes for marvell platforms that didn't make it in before 3.5." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: fix compile error caused by prom_update_property change ARM: dt: tegra trimslice: enable USB2 port ARM: dt: tegra trimslice: add vbus-gpio property ARM: vt8500: Add maintainer for VT8500 architecture ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. ARM: versatile: Don't use platform clock for Integrator & VE ARM: tegra: harmony: add regulator supply name and its input supply
2012-07-26Merge tag 'gpio-for-v3.6' of ↵Linus Torvalds3-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: - New driver for AMD-8111 southbridge GPIOs - New driver for Wolfson Micro Arizona devices - Propagate device tree parse errors - Probe deferral finalizations - all expected calls to GPIO will now hopefully request deferral where apropriate - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP and PCA953X drivers. Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c * tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available gpiolib: Defer failed gpio requests by default MAINTAINERS: add entry OMAP GPIO driver gpio/pca953x: increase variables size to support 24 bit of data GPIO: PCA953X: Increase size of invert variable to support 24 bit gpio/omap: move bank->dbck initialization to omap_gpio_mod_init() gpio/mxc: use the edge_sel feature if available gpio: propagate of_parse_phandle_with_args errors gpio: samsung: add flags specifier to device-tree binding gpiolib: Add support for Wolfson Microelectronics Arizona class devices gpio: gpio-lpc32xx: Add gpio_to_irq mapping gpio: pcf857x: share 8/16 bit access functions gpio: LPC32xx: Driver cleanup MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry gpiolib: wm8994: Convert to devm_kzalloc() gpiolib: wm8994: Use irq_domain mappings for gpios gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips gpio/tca6424: merge I2C transactions, remove cast gpio/of: fix a typo of comment message
2012-07-25ARM: dt: tegra trimslice: enable USB2 portStephen Warren1-0/+1
This was accidentally disabled by commit 2a5fdc9 "ARM: dt: tegra: invert status=disable vs status=okay". Cc: <stable@vger.kernel.org> # v3.5 (file is named tegra-trimslice.dts there) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-25ARM: dt: tegra trimslice: add vbus-gpio propertyStephen Warren1-0/+1
On TrimSlice, Tegra's USB1 port may be routed to either an external micro USB port, or an internal USB->SATA bridge for SSD or HDD. This muxing is controlled by a GPIO. Whilst not strictly a VBUS GPIO, the TrimSlice board files caused this GPIO to be set appropriately to enable the SATA bridge by passing it as the VBUS GPIO to the USB driver. Echo this same configuration in device tree to enable the SATA bridge. An alternative might be to implement a full USB bus mux driver. However, that seems over-complex right now. Cc: <stable@vger.kernel.org> # v3.5 (file is named tegra-trimslice.dts there) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-25Merge branch 'v3.5-rc7-fixes' of git://github.com/lunn/linux into fixesArnd Bergmann6-8/+8
From Andrew Lunn <andrew@lunn.ch>: * 'v3.5-rc7-fixes' of git://github.com/lunn/linux: ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-25ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn6-8/+8
It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-24Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds1-1/+90
Pull common clk framework changes from Michael Turquette: "This includes a small number of core framework improvments, platform ports and new DT bindings." Fix up trivial conflicts in drivers/clk/Makefile * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits) clk: fix compile for OF && !COMMON_CLK clk: fix clk_get on of_clk_get_by_name return check clk: mxs: clk_register_clkdev mx28 usb clocks clk: add highbank clock support dt: add clock binding doc to primecell bindings clk: add DT fixed-clock binding support clk: add DT clock binding support ARM: integrator: convert to common clock clk: add versatile ICST307 driver ARM: integrator: put symbolic bus names on devices ARM: u300: convert to common clock clk: cache parent clocks only for muxes clk: wm831x: Add initial WM831x clock driver clk: Constify struct clk_init_data clk: Add CLK_IS_BASIC flag to identify basic clocks clk: Add support for rate table based dividers clk: Add support for power of two type dividers clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3 clk: mxs: add clkdev lookup for pwm clk: mxs: Fix the GPMI clock name ...
2012-07-23Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds9-0/+635
Pull support for three new arm SoC types from Arnd Bergmann: - The mvebu platform includes Marvell's Armada XP and Armada 370 chips, made by the mvebu business unit inside of Marvell. Since the same group also made the older but similar platforms we call "orion5x", "kirkwood", "mv78xx0" and "dove", we plan to move all of them into the mach-mvebu directory in the future. - socfpga is Altera's platform based on Cortex-A9 cores and a lot of FPGA space. This is similar to the Xilinx zynq platform we already support. The code is particularly clean, which is helped by the fact that the hardware doesn't do much besides the parts that are expected to get added in the FPGA. - The OMAP subarchitecture gains support for the latest generation, the OMAP5 based on the new Cortex-A15 core. Support is rather rudimentary for now, but will be extended in the future. * tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: socfpga: initial support for Altera's SOCFPGA platform arm: mvebu: generate DTBs for supported SoCs ARM: mvebu: MPIC: read number of interrupts from control register arm: mach-mvebu: add entry to MAINTAINERS arm: mach-mvebu: add compilation/configuration change arm: mach-mvebu: add defconfig arm: mach-mvebu: add documentation for new device tree bindings arm: mach-mvebu: add support for Armada 370 and Armada XP with DT arm: mach-mvebu: add source files arm: mach-mvebu: add header clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver ARM: Kconfig update to support additional GPIOs in OMAP5 ARM: OMAP5: Add the build support arm/dts: OMAP5: Add omap5 dts files ARM: OMAP5: board-generic: Add device tree support ARM: omap2+: board-generic: clean up the irq data from board file ARM: OMAP5: Add SMP support ARM: OMAP5: Add the WakeupGen IP updates ARM: OMAP5: l3: Add l3 error handler support for omap5 ARM: OMAP5: gpmc: Update gpmc_init() ... Conflicts: Documentation/devicetree/bindings/arm/omap/omap.txt arch/arm/mach-omap2/Makefile drivers/clocksource/Kconfig drivers/clocksource/Makefile
2012-07-23Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds45-99/+3078
Pull arm-soc device tree description updates from Arnd Bergmann: "This branch contains two kinds of updates: Some platforms in the process of getting converted to device tree based booting, and the platform specific patches necessary for that are included here. Other platforms are already converted, so we just need to update the actual device tree source files and the binding documents to add support for new board and new drivers. In the future we will probably separate those into two branches, and in the long run, the plan is to move the device tree source files out of the kernel repository, but that has to wait until we have completed a much larger portion of the binding documents." Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly added clkdev registers next to a few removed unnecessary ones. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: LPC32xx: Add PWM to base dts file ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: ux500: Remove PMU platform registration when booting with DT ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure ARM: ux500: Ensure vendor specific properties have the vendor's identifier pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree ARM: ux500: Apply ab8500-debug node do the db8500 DT structure ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT ...
2012-07-23Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds7-41/+497
Pull arm soc-specific updates from Arnd Bergmann: "This is stuff that does not fit well into another category and in particular is not related to a particular board. The largest part in here is extending the am33xx support in the omap platform." Fix up trivial conflicts in arch/arm/mach-{imx/mach-mx35_3ds.c, tegra/Makefile} * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: LPC32xx: Add PWM support ARM: LPC32xx: Add PWM clock ARM: LPC32xx: Set system serial based on cpu unique id ARM: vexpress: Config option for early printk console ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses ARM: vexpress: Add fixed regulator for SMSC ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files ARM: vexpress: Initial common clock support ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API ARM: EXYNOS: Add missing static storage class specifier in pmu.c file ARM: EXYNOS: Make combiner_init function static ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12 ARM: versatile: Make plat-versatile clock optional ARM: vexpress: Check master site in daughterboard's sysctl operations ARM: vexpress: remove automatic errata workaround selection ARM: LPC32xx: Adjust to pl08x DMA interface changes ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset ARM: imx: fix mx51 ehci setup errors ARM: imx: make ehci power/oc polarities configurable ...
2012-07-23Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds13-132/+131
Pull general arm-soc cleanups from Arnd Bergmann: "These are all boring changes, moving stuff around or renaming things mostly, and also getting rid of stuff that is duplicate or should not be there to start with. Platform-wise this is all over the place, mainly omap, samsung, at91, imx and tegra." Resolve trivial conflict in arch/arm/mach-omap2/clockdomains3xxx_data.c * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: clps711x: Remove the setting of the time ARM: clps711x: Removed superfluous transform virt_to_bus and related functions ARM: clps711x/p720t: Replace __initcall by .init_early call ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board ARM: S3C24XX: Remove unused GPIO definitions for port J ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API ARM: S3C24XX: Convert the PM code to gpiolib API ARM: S3C24XX: Convert QT2410 board file to the gpiolib API ARM: S3C24XX: Convert SMDK board file to the gpiolib API ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code ARM: imx: remove unused pdata from device macros ARM: imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX_SSI from MACH_MX25_3DS ARM: at91: fix new build errors ARM: at91: add AIC5 support ARM: at91: remove mach/irqs.h ARM: at91: sparse irq support ARM: at91: at91 based machines specify their own irq handler at run time ARM: at91: remove static irq priorities for sam9x5 ARM: at91: add of irq priorities support ...
2012-07-23Merge tag 'fixes-non-critical' of ↵Linus Torvalds3-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical arm-soc bug fixes from Arnd Bergmann: "These were submitted as bug fixes before v3.5 but not considered important enough to be included in it." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM:vt8500: Convert to use .restart and remove arch_reset() ARM: davinci: da8xx: fix interrupt handling ARM: OMAP2+: fix CONFIG_CPU_IDLE dependency on CONFIG_PM ARM: mxs/tx28: fix odd include ARM: OMAP: remove unused cpu detection macros ARM: OMAP: fix typos related to OMAP330 ARM: OMAP7XX: Remove omap730.h and omap850.h ARM: OMAP2+: fix naming collision of variable nr_irqs ARM: OMAP: omap2plus_defconfig: Enable EXT4 support ARM: OMAP depends on MMU arm: omap3: am35x: Set proper powerdomain states ARM: OMAP AM35x: clockdomain data: Fix clockdomain dependencies ARM: OMAP AM35x: EMAC/MDIO integration: Add Davinci EMAC/MDIO hwmod support ARM: OMAP: AM35xx: fix UART4 softreset ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data ARM: OMAP AM35xx: clock and hwmod data: fix AM35xx HSOTGUSB hwmod ARM: OMAP: Fix dts files w/ status property: "disable" -> "disabled" ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED ARM: OMAP2: twl-common: Fix compiler warning ARM: OMAP: fix the ads7846 init code ...
2012-07-22Merge tag 'regulator-3.6' of ↵Linus Torvalds1-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Lots and lots of fixes from Axel and some others here, plus some framework enhancements which continue the theme of factoring code out of the drivers and into the core. - Initial framework support for GPIO controlled enable signals, saving a bunch of code in drivers. - Move fixed regulator enable time and voltage mapping table specifications to data. - Used some of the recent framework enhancements to make voltage change notifications more useful, passing the voltage in as an argument to the notification. - Fixed the pattern used for finding individual regulators on a device to not rely on the node name, supporting the use of multiple PMICs of the same type in the system. - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung S2MPS11, and Wolfson Arizona microphone supplies and LDOs." * tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits) regulator: add new lp8788 regulator driver regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator regulator: tps65910: set input_supply on desc unconditionally regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data() regulator: twl: Fix list_voltate for twl6030ldo_ops regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo regulator: s5m8767: Properly handle gpio_request failure regulator: max8997: Properly handle gpio_request failure regulator: tps62360: use devm_* for gpio request regulator: tps6586x: add support for input supply regulator: tps65217: Add device tree support regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator regulator: aat2870: Convert to regulator_list_voltage_table regulator: da9052: initialize of_node param for regulator register regulator: Add REGULATOR_STATUS_UNDEFINED. regulator: Fix a typo in regulator_mode_to_status() core function. regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff regulator: s2mps11: Fix wrong setting for config.dev ...
2012-07-21Merge tag 'v3.5-rc7' into late/socArnd Bergmann14-14/+16
Linux 3.5-rc7
2012-07-21Merge branch 'lpc32xx/dts2' of git://git.antcom.de/linux-2.6 into next/dtArnd Bergmann1-0/+5
From Roland Stigge <stigge@antcom.de>: this is a late addition to LPC32xx DTS files for v3.6. * 'lpc32xx/dts2' of git://git.antcom.de/linux-2.6: ARM: LPC32xx: Add PWM to base dts file Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-20ARM: LPC32xx: Add PWM to base dts fileAlexandre Pereira da Silva1-0/+5
Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-07-19ARM: socfpga: initial support for Altera's SOCFPGA platformDinh Nguyen2-0/+181
Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsiStefan Roese1-0/+1
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: dts: SPEAr320: Boot the board in EXTENDED_MODEVipul Kumar Samar1-1/+1
On spear320 device supported mode are: * AUTO_NET_SMII_MODE * AUTO_NET_MII_MODE * AUTO_EXP_MODE * SMALL_PRINTERS_MODE * EXTENDED_MODE spear320-evb board is designed for EXTENDED_MODE only, hence it does not boot correctly in current form where pinctrl part for some devices fail. Configure and boot the SPEAr320 evaluation board in EXTENDED_MODE. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: dts: SPEAr320: Fix compatible stringVipul Kumar Samar1-2/+2
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: SPEAr13xx: Fix Interrupt bindingsVipul Kumar Samar1-5/+6
- Correct interrupt bindings for uart, ethernet and pmu. - Added interrupt binding for keyboard. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-17Merge branch 'for-arm-soc-next' of ↵Arnd Bergmann2-12/+86
git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt From Lee Jones <lee.jones@linaro.org>: * 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Remove PMU platform registration when booting with DT ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure ARM: ux500: Ensure vendor specific properties have the vendor's identifier pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree ARM: ux500: Apply ab8500-debug node do the db8500 DT structure ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT ARM: ux500: Enable LED heartbeat functionality on Snowball ARM: ux500: Add support for input/ponkey into the db8500's Device Tree ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree ARM: ux500: Enable the user LED on Snowball via Device Tree ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2c ARM: ux500: Remove unused i2c platform_data initialisation code ARM: ux500: Enable Device Tree support mmci for Snowball Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17ARM: EXYNOS: mark the DMA channel binding for SPI as preliminaryArnd Bergmann2-12/+12
Bindings for DMA channels are still under discussion and will change once this has been resolved. Therefore we mark them the newly added ones as preliminary. Let's hope nobody starts relying on them... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'next/dt-samsung' of ↵Arnd Bergmann5-0/+171
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim <kgene.kim@samsung.com>: It is for supporting spi dt for exynos4210 and exynos5250, and got the ack from Grant Likely for spi driver. Note: Since this is including spi driver changes, so it was made based on next/devel-dma-ops which touches same file, Samsung spi driver for avoiding bad conflicts. * 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: EXYNOS: Add device tree node for EXYNOS4 interrupt combiner controller spi: s3c64xx: add device tree support spi: s3c64xx: Remove the 'set_level' callback from controller data ARM: SAMSUNG: Modify s3c64xx_spi{0|1|2}_set_platdata function ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functions spi: s3c64xx: move controller information into driver data spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro ARM: S3C64XX: Add a new dma request id for device tree based dma channel lookup Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17gpio/mxc: use the edge_sel feature if availableBenoît Thébaudeau3-18/+18
Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-14ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platformsThomas Abraham2-0/+74
Add device nodes for the three instances of spi controllers in EXYNOS5 platforms and enable instance SPI 1 for SMDK5250 board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platformsThomas Abraham3-0/+86
Add device nodes for the three instances of spi controllers in EXYNOS4 platforms. Enable instance SPI 2 for SMDKV310 board and disable all spi instances for Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13Merge branch 'vexpress-v3.5-rc6' of ↵Arnd Bergmann4-18/+228
git://git.linaro.org/people/pawelmoll/linux into next/soc From Pawel Moll <pawel.moll@arm.com>: Versatile Express updates for v3.6 * 'vexpress-v3.5-rc6' of git://git.linaro.org/people/pawelmoll/linux: ARM: vexpress: Config option for early printk console ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses ARM: vexpress: Add fixed regulator for SMSC ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files ARM: vexpress: Initial common clock support ARM: versatile: Make plat-versatile clock optional ARM: vexpress: Check master site in daughterboard's sysctl operations ARM: vexpress: remove automatic errata workaround selection Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-13ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tilePawel Moll1-0/+188
This patch adds Device Tree file for the CoreTile Express A15x2 A7x3 (V2P-CA15_CA7). Note that the A7 cpu nodes are commented out, as the big.LITTLE-relevant patches are not upstreamed yet. Till this time one can use the board with two A15 cores only, keeping the A7s in reset by adding the following setting to the board.txt file in Versatile Express configuration tree: SCC: 0x018 0x00001FFF Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addressesPawel Moll1-18/+18
... to enable use of LPAE, which extends physical address space to 40 bits. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add fixed regulator for SMSCPawel Moll2-0/+20
SMSC driver requires "vdd33a" and "vddvario" regulator supplies now. Add fixed regulator describing 3V3 power line (in both motherboard's Device Trees and the non-DT code) and force fixed regulator config option if regulators framework is enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS filesPawel Moll2-0/+2
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13i2c: mxs: Set I2C timing registers for mxs-i2cMarek Vasut1-0/+2
This patch configures the I2C bus timing registers according to information passed via DT. Currently, 100kHz and 400kHz modes are supported. The TIMING2 register value is wrong in the documentation for i.MX28! This was found and fixed by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-13ARM: ux500: Ensure vendor specific properties have the vendor's identifierLee Jones1-9/+9
Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Move rtc-pl031 registration to Device Tree when enabledLee Jones1-1/+1
During a Device Tree boot, all probing will now be completed on parse of the Device Tree binary. In the same patch we remove platform registration of the Real Time Clock. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devicesLee Jones1-0/+7
Here we add a node for the AB8500 Real Time Clock in all devices supporting the DB8500. The AB8500 RTC driver makes use of named interrupts we provide support for this too. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device TreeLee Jones1-11/+13
The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Apply ab8500-debug node do the db8500 DT structureLee Jones1-0/+4
This node has no properties. It merely allows probing of the ab8500-debugfs driver during Device Tree initialisation. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devicesLee Jones1-0/+21
Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwmLee Jones1-0/+4
This adds the DT node for the misc/ab8500-pwm driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrlLee Jones1-0/+4
This adds the DT node for the mfd/ab8500-sysctrl driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable LED heartbeat functionality on Snowbal via DTLee Jones1-0/+1
This patch configures the user LED on Snowball to double flash every second or so, whilst it's still alive. This can give key indications as to what the board is doing in the case of no console output. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add support for input/ponkey into the db8500's Device TreeLee Jones1-0/+7
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>