summaryrefslogtreecommitdiffstats
path: root/arch/arc/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+2
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ...
2020-12-15arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEMMike Rapoport1-1/+2
Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-06arc/mm/highmem: Use generic kmap atomic implementationThomas Gleixner1-0/+1
Adopt the map ordering to match the other architectures and the generic code. Also make the maximum entries limited and not dependend on the number of CPUs. With the original implementation did the following calculation: nr_slots = mapsize >> PAGE_SHIFT; The results in either 512 or 1024 total slots depending on configuration. The total slots have to be divided by the number of CPUs to get the number of slots per CPU (former KM_TYPE_NR). ARC supports up to 4k CPUs, so this just falls apart in random ways depending on the number of CPUs and the actual kmap (atomic) nesting. The comment in highmem.c: * - fixmap anyhow needs a limited number of mappings. So 2M kvaddr == 256 PTE * slots across NR_CPUS would be more than sufficient (generic code defines * KM_TYPE_NR as 20). is just wrong. KM_TYPE_NR (now KM_MAX_IDX) is the number of slots per CPU because kmap_local/atomic() needs to support nested mappings (thread, softirq, interrupt). While KM_MAX_IDX might be overestimated, the above reasoning is just wrong and clearly the highmem code was never tested with any system with more than a few CPUs. Use the default number of slots and fail the build when it does not fit. Randomly failing at runtime is not a really good option. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095857.472289952@linutronix.de
2020-10-30timekeeping: default GENERIC_CLOCKEVENTS to enabledArnd Bergmann1-1/+0
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to require each one to select that symbol manually. Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as a simplification. It should be possible to select both GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now and decide at runtime between the two. For the clockevents arch-support.txt file, this means that additional architectures are marked as TODO when they have at least one machine that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when at least one machine has been converted. This means that both m68k and arm (for riscpc) revert to TODO. At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS rather than leaving it off when not needed. I built an m68k defconfig kernel (using gcc-10.1.0) and found that this would add around 5.5KB in kernel image size: text data bss dec hex filename 3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent 3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent On Arm (MACH_RPC), that difference appears to be twice as large, around 11KB on top of an 6MB vmlinux. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-05ARC: [plat-eznps]: Drop support for EZChip NPS platformVineet Gupta1-2/+0
NPS customers are no longer doing active development, as evident from rand config build failures reported in recent times, so drop support for NPS platform. Tested-by: kernel test robot <lkp@intel.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-09-08uaccess: add infrastructure for kernel builds with set_fs()Christoph Hellwig1-0/+1
Add a CONFIG_SET_FS option that is selected by architecturess that implement set_fs, which is all of them initially. If the option is not set stubs for routines related to overriding the address space are provided so that architectures can start to opt out of providing set_fs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-04Merge tag 'fork-v5.9' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull fork cleanups from Christian Brauner: "This is cleanup series from when we reworked a chunk of the process creation paths in the kernel and switched to struct {kernel_}clone_args. High-level this does two main things: - Remove the double export of both do_fork() and _do_fork() where do_fork() used the incosistent legacy clone calling convention. Now we only export _do_fork() which is based on struct kernel_clone_args. - Remove the copy_thread_tls()/copy_thread() split making the architecture specific HAVE_COYP_THREAD_TLS config option obsolete. This switches all remaining architectures to select HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling convention. The current split makes the process creation codepaths more convoluted than they need to be. Each architecture has their own copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it has a copy_thread_tls() function. The split is not needed anymore nowadays, all architectures support CLONE_SETTLS but quite a few of them never bothered to select HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread() and use the old calling convention. Removing this split cleans up the process creation codepaths and paves the way for implementing clone3() on such architectures since it requires the copy_thread_tls() calling convention. After having made each architectures support copy_thread_tls() this series simply renames that function back to copy_thread(). It also switches all architectures that call do_fork() directly over to _do_fork() and the struct kernel_clone_args calling convention. This is a corollary of switching the architectures that did not yet support it over to copy_thread_tls() since do_fork() is conditional on not supporting copy_thread_tls() (Mostly because it lacks a separate argument for tls which is trivial to fix but there's no need for this function to exist.). The do_fork() removal is in itself already useful as it allows to to remove the export of both do_fork() and _do_fork() we currently have in favor of only _do_fork(). This has already been discussed back when we added clone3(). The legacy clone() calling convention is - as is probably well-known - somewhat odd: # # ABI hall of shame # config CLONE_BACKWARDS config CLONE_BACKWARDS2 config CLONE_BACKWARDS3 that is aggravated by the fact that some architectures such as sparc follow the CLONE_BACKWARDSx calling convention but don't really select the corresponding config option since they call do_fork() directly. So do_fork() enforces a somewhat arbitrary calling convention in the first place that doesn't really help the individual architectures that deviate from it. They can thus simply be switched to _do_fork() enforcing a single calling convention. (I really hope that any new architectures will __not__ try to implement their own calling conventions...) Most architectures already have made a similar switch (m68k comes to mind). Overall this removes more code than it adds even with a good portion of added comments. It simplifies a chunk of arch specific assembly either by moving the code into C or by simply rewriting the assembly. Architectures that have been touched in non-trivial ways have all been actually boot and stress tested: sparc and ia64 have been tested with Debian 9 images. They are the two architectures which have been touched the most. All non-trivial changes to architectures have seen acks from the relevant maintainers. nios2 with a custom built buildroot image. h8300 I couldn't get something bootable to test on but the changes have been fairly automatic and I'm sure we'll hear people yell if I broke something there. All other architectures that have been touched in trivial ways have been compile tested for each single patch of the series via git rebase -x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested even though they have just been trivially touched (removal of the HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are basically "core architectures" and since it is trivial to get your hands on a useable image" * tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: arch: rename copy_thread_tls() back to copy_thread() arch: remove HAVE_COPY_THREAD_TLS unicore: switch to copy_thread_tls() sh: switch to copy_thread_tls() nds32: switch to copy_thread_tls() microblaze: switch to copy_thread_tls() hexagon: switch to copy_thread_tls() c6x: switch to copy_thread_tls() alpha: switch to copy_thread_tls() fork: remove do_fork() h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args sparc: unconditionally enable HAVE_COPY_THREAD_TLS sparc: share process creation helpers between sparc and sparc64 sparc64: enable HAVE_COPY_THREAD_TLS fork: fold legacy_clone_args_valid() into _do_fork()
2020-07-04arch: remove HAVE_COPY_THREAD_TLSChristian Brauner1-1/+0
All architectures support copy_thread_tls() now, so remove the legacy copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone uses the same process creation calling convention based on copy_thread_tls() and struct kernel_clone_args. This will make it easier to maintain the core process creation code under kernel/, simplifies the callpaths and makes the identical for all architectures. Cc: linux-arch@vger.kernel.org Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-06-18ARCv2: support loop buffer (LPB) disablingEugeniy Paltsev1-0/+6
On HS cores, loop buffer (LPB) is programmable in runtime and can be optionally disabled. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-06-16ARC: build: allow users to specify -mcpuEugeniy Paltsev1-0/+9
kernel build system used to add -mcpu for each ARC ISA as default. These days there are versions and varaints of ARC HS cores some of which have specific -mcpu options to fine tune / optimize generated code. So allow users/external build systems to specify their own -mcpu This will be used in future patches for HSDK-4xD board support which uses specific -mcpu to utilize dual issue scheduling of the core. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [abrodkin/vgupta: rewrote changelog]
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-04mm/debug: add tests validating architecture page table helpersAnshuman Khandual1-0/+1
This adds tests which will validate architecture page table helpers and other accessors in their compliance with expected generic MM semantics. This will help various architectures in validating changes to existing page table helpers or addition of new ones. This test covers basic page table entry transformations including but not limited to old, young, dirty, clean, write, write protect etc at various level along with populating intermediate entries with next page table page and validating them. Test page table pages are allocated from system memory with required size and alignments. The mapped pfns at page table levels are derived from a real pfn representing a valid kernel text symbol. This test gets called via late_initcall(). This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected. Any architecture, which is willing to subscribe this test will need to select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64, x86, s390 and powerpc platforms where the test is known to build and run successfully Going forward, other architectures too can subscribe the test after fixing any build or runtime problems with their page table helpers. Folks interested in making sure that a given platform's page table helpers conform to expected generic MM semantics should enable the above config which will just trigger this test during boot. Any non conformity here will be reported as an warning which would need to be fixed. This test will help catch any changes to the agreed upon semantics expected from generic MM and enable platforms to accommodate it thereafter. [anshuman.khandual@arm.com: v17] Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com [anshuman.khandual@arm.com: v18] Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> [ppc32] Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-16ARC: allow userspace DSP applications to use AGU extensionsEugeniy Paltsev1-0/+9
To be able to run DSP-enabled userspace applications with AGU (address generation unit) extensions we additionally need to save and restore following registers at context switch: * AGU_AP* * AGU_OS* * AGU_MOD* Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-16ARC: add support for DSP-enabled userspace applicationsEugeniy Paltsev1-0/+12
To be able to run DSP-enabled userspace applications we need to save and restore following DSP-related registers: At IRQ/exception entry/exit: * DSP_CTRL (save it and reset to value suitable for kernel) * ACC0_LO, ACC0_HI (we already save them as r58, r59 pair) At context switch: * ACC0_GLO, ACC0_GHI * DSP_BFLY0, DSP_FFT_CTRL Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-16ARC: handle DSP presence in HWEugeniy Paltsev1-1/+28
When DSP extensions are present, some of the regular integer instructions such as DIV, MACD etc are executed in the DSP unit with semantics alterable by flags in DSP_CTRL aux register. This register is writable by userspace and thus can potentially affect corresponding instructions in kernel code, intentionally or otherwise. So safegaurd kernel by effectively disabling DSP_CTRL upon bootup and every entry to kernel. Do note that for this config we simply zero out the DSP_CTRL reg assuming userspace doesn't really care about DSP. The next patch caters to the DSP aware userspace where this reg is saved/restored upon kernel entry/exit. Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-02-09ARC: fix some Kconfig typosRandy Dunlap1-2/+2
Fix language typos in arch/arc/Kconfig. Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-01-31Merge tag 'arc-5.6-rc1' of ↵Linus Torvalds1-10/+6
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Wire up clone3 syscall - ARCv2 FPU state save/restore across context switch - AXS10x platform and misc fixes * tag 'arc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: fpu: preserve userspace fpu state ARC: fpu: declutter code, move bits out into fpu.h ARC: wireup clone3 syscall ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node ARC: update feature support for jump-labels
2020-01-17ARCv2: fpu: preserve userspace fpu stateVineet Gupta1-10/+5
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-01-15ARC: wireup clone3 syscallVineet Gupta1-0/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-12-13scripts/sorttable: Rename 'sortextable' to 'sorttable'Shile Zhang1-1/+1
Use a more generic name for additional table sorting usecases, such as the upcoming ORC table sorting feature. This tool is not tied to exception table sorting anymore. No functional changes intended. [ mingo: Rewrote the changelog. ] Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-04Merge tag 'arc-5.5-rc1' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta - Jump Label support for ARC - kmemleak enabled - arc mm backend TLB Miss / flush optimizations - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig updates and cleanups - axs platform pll / video-mode updates * tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: add kmemleak support ARC: [plat-axs10x]: remove hardcoded video mode from bootargs ARC: [plat-axs10x]: use pgu pll instead of fixed clock ARC: ARCv2: jump label: implement jump label patching ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3 ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available ARC: mm: TLB Miss optim: avoid re-reading ECR ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg ARC: nSIM_700: remove unused network options ARC: nSIM_700: switch to DW UART usage ARC: merge HAPS-HS with nSIM-HS configs ARC: HAPS: cleanup defconfigs from unused ETH drivers ARC: HAPS: add HIGHMEM memory zone to DTS ARC: HAPS: use same UART configuration everywhere ARC: HAPS: cleanup defconfigs from unused IO-related options ARC: regenerate nSIM and HAPS defconfigs
2019-11-20ARC: add kmemleak supportEugeniy Paltsev1-0/+1
kmemleak is used internally for a long time and as there isn't any issue with it we can finally enable it in upstream. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-11-11dma-direct: provide mmap and get_sgtable method overridesChristoph Hellwig1-1/+0
For dma-direct we know that the DMA address is an encoding of the physical address that we can trivially decode. Use that fact to provide implementations that do not need the arch_dma_coherent_to_pfn architecture hook. Note that we still can only support mmap of non-coherent memory only if the architecture provides a way to set an uncached bit in the page tables. This must be true for architectures that use the generic remap helpers, but other architectures can also manually select it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-08ARC: ARCv2: jump label: implement jump label patchingEugeniy Paltsev1-0/+8
Implement jump label patching for ARC. Jump labels provide an interface to generate dynamic branches using self-modifying code. This allows us to implement conditional branches where changing branch direction is expensive but branch selection is basically 'free' This implementation uses 32-bit NOP and BRANCH instructions which forced to be aligned by 4 to guarantee that they don't cross L1 cache line boundary and can be update atomically. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-12Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+2
Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ...
2019-06-25arc: use the generic remapping allocator for coherent DMA allocationsChristoph Hellwig1-0/+2
Replace the code that sets up uncached PTEs with the generic vmap based remapping code. It also provides an atomic pool for allocations from non-blocking context, which we not properly supported by the existing arc code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com> Tested-by: Evgeniy Paltsev <paltsev@synopsys.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03locking/rwsem: Remove rwsem-spinlock.c & use rwsem-xadd.c for all archsWaiman Long1-3/+0
Currently, we have two different implementation of rwsem: 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c) 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c) As we are going to use a single generic implementation for rwsem-xadd.c and no architecture-specific code will be needed, there is no point in keeping two different implementations of rwsem. In most cases, the performance of rwsem-spinlock.c will be worse. It also doesn't get all the performance tuning and optimizations that had been implemented in rwsem-xadd.c over the years. For simplication, we are going to remove rwsem-spinlock.c and make all architectures use a single implementation of rwsem - rwsem-xadd.c. All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM in the code are removed. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-riscv@lists.infradead.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linuxppc-dev@lists.ozlabs.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: uclinux-h8-devel@lists.sourceforge.jp Link: https://lkml.kernel.org/r/20190322143008.21313-3-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-20Merge tag 'arc-5.1-rc2' of ↵Linus Torvalds1-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - unaligned access support for HS cores - Removed extra memory barrier around spinlock code - HSDK platform updates: enable dmac, reset - some more boot logging updates - misc minor fixes * tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arch: arc: Kconfig: pedantic formatting ARCv2: spinlock: remove the extra smp_mb before lock, after unlock ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access ARC: boot log: cut down on verbosity ARCv2: boot log: refurbish HS core/release identification arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM ARC: u-boot args: check that magic number is correct ARC: perf: bpok condition only exists for ARCompact ARCv2: Add explcit unaligned access support (and ability to disable too) ARCv2: lib: introduce memcpy optimized for unaligned access ARC: [plat-hsdk]: Enable AXI DW DMAC support ARC: [plat-hsdk]: Add reset controller handle to manage USB reset ARC: DTB: [scripted] fix node name and address spelling
2019-03-11arch: arc: Kconfig: pedantic formattingEnrico Weigelt, metux IT consult1-6/+6
Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+1
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-05Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull year 2038 updates from Thomas Gleixner: "Another round of changes to make the kernel ready for 2038. After lots of preparatory work this is the first set of syscalls which are 2038 safe: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 The syscall numbers are identical all over the architectures" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) riscv: Use latest system call ABI checksyscalls: fix up mq_timedreceive and stat exceptions unicore32: Fix __ARCH_WANT_STAT64 definition asm-generic: Make time32 syscall numbers optional asm-generic: Drop getrlimit and setrlimit syscalls from default list 32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option compat ABI: use non-compat openat and open_by_handle_at variants y2038: add 64-bit time_t syscalls to all 32-bit architectures y2038: rename old time and utime syscalls y2038: remove struct definition redirects y2038: use time32 syscall names on 32-bit syscalls: remove obsolete __IGNORE_ macros y2038: syscalls: rename y2038 compat syscalls x86/x32: use time64 versions of sigtimedwait and recvmmsg timex: change syscalls to use struct __kernel_timex timex: use __kernel_timex internally sparc64: add custom adjtimex/clock_adjtime functions time: fix sys_timer_settime prototype time: Add struct __kernel_timex time: make adjtime compat handling available for 32 bit ...
2019-02-25ARCv2: Add explcit unaligned access support (and ability to disable too)Eugeniy Paltsev1-0/+9
As of today we enable unaligned access unconditionally on ARCv2. Do this under a Kconfig option to allow disable it for test, benchmarking etc. Also while at it - Select HAVE_EFFICIENT_UNALIGNED_ACCESS - Although gcc defaults to unaligned access (since GNU 2018.03), add the right toggles for enabling or disabling as appropriate - update bootlog to prints both HW feature status (exists, enabled/disabled) and SW status (used / not used). - wire up the relaxed memcpy for unaligned access Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: squashed patches, handle gcc -mno-unaligned-access quick]
2019-02-21ARC: enable uboot support unconditionallyEugeniy Paltsev1-12/+0
After reworking U-boot args handling code and adding paranoid arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and enable uboot support unconditionally. For JTAG case we can assume that core registers will come up reset value of 0 or in worst case we rely on user passing '-on=clear_regs' to Metaware debugger. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE <clabbe@baylibre.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARCv2: support manual regfile save on interruptsVineet Gupta1-0/+8
There's a hardware bug which affects the HSDK platform, triggered by micro-ops for auto-saving regfile on taken interrupt. The workaround is to inhibit autosave. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-20dma-mapping: improve selection of dma_declare_coherent availabilityChristoph Hellwig1-1/+0
This API is primarily used through DT entries, but two architectures and two drivers call it directly. So instead of selecting the config symbol for random architectures pull it in implicitly for the actual users. Also rename the Kconfig option to describe the feature better. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-1932-bit userspace ABI: introduce ARCH_32BIT_OFF_T config optionYury Norov1-0/+1
All new 32-bit architectures should have 64-bit userspace off_t type, but existing architectures has 32-bit ones. To enforce the rule, new config option is added to arch/Kconfig that defaults ARCH_32BIT_OFF_T to be disabled for new 32-bit architectures. All existing 32-bit architectures enable it explicitly. New option affects force_o_largefile() behaviour. Namely, if userspace off_t is 64-bits long, we have no reason to reject user to open big files. Note that even if architectures has only 64-bit off_t in the kernel (arc, c6x, h8300, hexagon, nios2, openrisc, and unicore32), a libc may use 32-bit off_t, and therefore want to limit the file size to 4GB unless specified differently in the open flags. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yury Norov <ynorov@marvell.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-13of: select OF_RESERVED_MEM automaticallyChristoph Hellwig1-1/+0
The OF_RESERVED_MEM can be used if we have either CMA or the generic declare coherent code built and we support the early flattened DT. So don't bother making it a user visible options that is selected by most configs that fit the above category, but just select it when the requirements are met. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rob Herring <robh@kernel.org>
2019-02-13dma-mapping: add a kconfig symbol for arch_setup_dma_ops availabilityChristoph Hellwig1-0/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2018-12-29Merge tag 'kconfig-v4.21-2' of ↵Linus Torvalds1-23/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-12-28Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+0
Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...
2018-12-25Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer department delivers the following christmas presents: Core code: - Use proper seqcount initializer to make lockdep happy - SPDX annotations and cleanup of license boilerplates - Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it - Minor cleanups Driver code: - Add the sched_clock for the arc timer (Alexey Brodkin) - Change the file timer names for riscv, rockchip, tegra20, sun4i and meson6 (Daniel Lezcano) - Add the DT bindings for r8a7796, r8a77470 and r8a774a1 (Biju Das) - Remove the early platform driver registration for timer-ti-dm (Bartosz Golaszewski) - Provide the sched_clock for the riscv timer (Anup Patel) - Add support for ARM64 for the imx-gpt and convert the imx-tpm to the timer-of API (Anson Huang) - Remove useless irq protection for the imx-gpt (Clément Péron) - Remove a duplicate function name for the vt8500 (Dan Carpenter) - Remove obsolete inclusion of <asm/smp_twd.h> for the tegra20 (Geert Uytterhoeven) - Demote the prcmu and the custom sched_clock for the dbx500 and the ux500 (Linus Walleij) - Add a new timer clock for the RDA8810PL (Manivannan Sadhasivam) - Rename the macro to stick to the register name and add the delay timer (Martin Blumenstingl) - Switch the bcm2835 to the SPDX identifier (Stefan Wahren) - Fix the interrupt register access on the fttmr010 (Tao Ren) - Add missing of_node_put in the initialization path on the integrator-ap (Yangtao Li)" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) dt-bindings: timer: Document RDA8810PL SoC timer clocksource/drivers/rda: Add clock driver for RDA8810PL SoC clocksource/drivers/meson6: Change name meson6_timer timer-meson6 clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4i clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20 clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchip clocksource/drivers/riscv: Change name riscv_timer to timer-riscv clocksource/drivers/riscv_timer: Provide the sched_clock clocksource/drivers/timer-imx-tpm: Specify clock name for timer-of clocksource/drivers/fttmr010: Fix invalid interrupt register access clocksource/drivers/integrator-ap: Add missing of_node_put() clocksource/drivers/bcm2835: Switch to SPDX identifier dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of clocksource/drivers/arc_timer: Utilize generic sched_clock dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support clocksource/drivers/imx-gpt: Remove unnecessary irq protection clocksource/drivers/imx-gpt: Add support for ARM64 clocksource/drivers/meson6_timer: Implement the ARM delay timer ...
2018-12-18clocksource/drivers/arc_timer: Utilize generic sched_clockAlexey Brodkin1-0/+1
It turned out we used to use default implementation of sched_clock() from kernel/sched/clock.c which was as precise as 1/HZ, i.e. by default we had 10 msec granularity of time measurement. Now given ARC built-in timers are clocked with the same frequency as CPU cores we may get much higher precision of time tracking. Thus we switch to generic sched_clock which really reads ARC hardware counters. This is especially helpful for measuring short events. That's what we used to have: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 10.000000 task-clock (msec) # 2.832 CPUs utilized 1 context-switches # 0.100 K/sec 1 cpu-migrations # 0.100 K/sec 63 page-faults # 0.006 M/sec 3049480 cycles # 0.305 GHz 1091259 instructions # 0.36 insn per cycle 256828 branches # 25.683 M/sec 27026 branch-misses # 10.52% of all branches 0.003530687 seconds time elapsed 0.000000000 seconds user 0.010000000 seconds sys ------------------------------>8------------------------ And now we'll see: ------------------------------>8------------------------ $ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello': 3.004322 task-clock (msec) # 0.865 CPUs utilized 1 context-switches # 0.333 K/sec 1 cpu-migrations # 0.333 K/sec 63 page-faults # 0.021 M/sec 2986734 cycles # 0.994 GHz 1087466 instructions # 0.36 insn per cycle 255209 branches # 84.947 M/sec 26002 branch-misses # 10.19% of all branches 0.003474829 seconds time elapsed 0.003519000 seconds user 0.000000000 seconds sys ------------------------------>8------------------------ Note how much more meaningful is the second output - time spent for execution pretty much matches number of cycles spent (we're runnign @ 1GHz here). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-13dma-mapping: always build the direct mapping codeChristoph Hellwig1-1/+0
All architectures except for sparc64 use the dma-direct code in some form, and even for sparc64 we had the discussion of a direct mapping mode a while ago. In preparation for directly calling the direct mapping code don't bother having it optionally but always build the code in. This is a minor hardship for some powerpc and arm configs that don't pull it in yet (although they should in a relase ot two), and sparc64 which currently doesn't need it at all, but it will reduce the ifdef mess we'd otherwise need significantly. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-06arch: switch the default on ARCH_HAS_SG_CHAINChristoph Hellwig1-1/+0
These days architectures are mostly out of the business of dealing with struct scatterlist at all, unless they have architecture specific iommu drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN one only enabled for architectures with horrible legacy iommu drivers like alpha and parisc, and conditionally for arm which wants to keep it disable for legacy platforms. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-30ARC: change defconfig defaults to ARCv2Kevin Hilman1-1/+1
Change the default defconfig (used with 'make defconfig') to the ARCv2 nsim_hs_defconfig, and also switch the default Kconfig ISA selection to ARCv2. This allows several default defconfigs (e.g. make defconfig, make allnoconfig, make tinyconfig) to all work with ARCv2 by default. Note since we change default architecture from ARCompact to ARCv2 it's required to explicitly mention architecture type in ARCompact defconfigs otherwise ARCv2 will be implied and binaries will be generated for ARCv2. Cc: <stable@vger.kernel.org> # 4.4.x Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-23PCI: consolidate the PCI_SYSCALL symbolChristoph Hellwig1-3/+1
Let architectures select the syscall support instead of duplicating the kconfig entry. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig1-20/+0
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-31 02:06:37 +0000