summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-37/+139
Pull networking from David Miller: 1) IPV4 routing metrics can become stale when routes are changed by the administrator, fix from Steffen Klassert. 2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask, fix by using set_bit. From Dan Carpenter. 3) Memory accounting bug in carl9170 driver results in wedged TX queue. Fix from Nicolas Cavallari. 4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix from Johannes Berg. 5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix from Ben Pfaff. 6) ehea conversion to 64-bit stats lost multicast and rx_errors accounting, fix from Eric Dumazet. 7) Bridge state transition logging in br_stp_disable_port() is busted, it's emitted at the wrong time and the message is in the wrong tense, fix from Paulius Zaleckas. 8) mlx4 device erroneously invokes the queue resize firmware operation twice, fix from Jack Morgenstein. 9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb() otherwise we recurse into taking it again. Fix from Sebastian Siewior. 10) hyperv network driver uses the wrong driver name string, fix from Haiyang Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver net/usbnet: avoid recursive locking in usbnet_stop() route: Remove redirect_genid inetpeer: Invalidate the inetpeer tree along with the routing cache mlx4_core: fix bug in modify_cq wrapper for resize flow. atl1c: set ATL1C_WORK_EVENT_RESET bit correctly bridge: fix state reporting when port is disabled bridge: br_log_state() s/entering/entered/ ehea: restore multicast and rx_errors fields openvswitch: Fix checksum update for actions on UDP packets. openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. iwlwifi: fix wowlan suspend mwifiex: reset encryption mode flag before association carl9170: fix frame delivery if sta is in powersave mode carl9170: Fix memory accounting when sta is in power-save mode.
2012-03-08Merge tag 'fixes-urgent' of ↵Linus Torvalds5-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull last minute fixes from Olof Johansson: "One samsung build fix due to a mis-applied patch, and a small set of OMAP fixes. This should be the last from arm-soc for 3.3, hopefully." * tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C2440: Fixed build error for s3c244x ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
2012-03-08Merge tag 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Another small, clear fix in a specific driver." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65910: Configure correct value for VDDCTRL vout reg
2012-03-08Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds6-5/+14
Pull minor devicetree bug fixes and documentation updates from Grant Likely: "Fixes up a duplicate #include, adds an empty implementation of of_find_compatible_node() and make git ignore .dtb files. And fix up bus name on OF described PHYs. Nothing exciting here." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: doc: dt: Fix broken reference in gpio-leds documentation of/mdio: fix fixed link bus name of/fdt.c: asm/setup.h included twice of: add picochip vendor prefix dt: add empty of_find_compatible_node function ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore
2012-03-08Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+1
Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely: "Minor fix for pl022_dma_probe() function which was put in the wrong section." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: Fix section mismatch in spi-pl022.c
2012-03-08Merge tag 'hwmon-for-linus' of ↵Linus Torvalds5-15/+59
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull four hwmon patches from Guenter Roeck * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 hwmon: (zl6100) Maintain delay parameter in driver instance data hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
2012-03-08Merge tag 'dm-3.3-fixes' of ↵Linus Torvalds5-20/+49
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes for 3.3 from Alasdair Kergon Eight small device-mapper bug fixes. * tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid: fix flush support dm raid: set MD_CHANGE_DEVS when rebuilding dm thin metadata: decrement counter after removing mapped block dm thin metadata: unlock superblock in init_pmd error path dm thin metadata: remove incorrect close_device on creation error paths dm flakey: fix crash on read when corrupt_bio_byte not set dm io: fix discard support dm ioctl: do not leak argv if target message only contains whitespace
2012-03-08net/hyperv: Use the built-in macro KBUILD_MODNAME for this driverHaiyang Zhang1-2/+2
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08Merge branch 'fixes' of ↵Olof Johansson4-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
2012-03-08ARM: S3C2440: Fixed build error for s3c244xKukjin Kim1-0/+1
Fixed following: arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart': arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1 make: *** [arch/arm/mach-s3c24xx] Error 2 Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-08net/usbnet: avoid recursive locking in usbnet_stop()Sebastian Siewior1-0/+2
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: Aníbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08route: Remove redirect_genidSteffen Klassert3-11/+2
As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08inetpeer: Invalidate the inetpeer tree along with the routing cacheSteffen Klassert3-1/+83
We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08mlx4_core: fix bug in modify_cq wrapper for resize flow.Jack Morgenstein1-2/+1
The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08atl1c: set ATL1C_WORK_EVENT_RESET bit correctlyDan Carpenter1-1/+1
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08bridge: fix state reporting when port is disabledPaulius Zaleckas1-2/+1
Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08bridge: br_log_state() s/entering/entered/Paulius Zaleckas1-1/+1
When br_log_state() is reporting state it should say "entered" istead of "entering" since state at this point is already changed. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08ehea: restore multicast and rx_errors fieldsEric Dumazet1-1/+3
Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07Merge branch 'fixes' of ↵David S. Miller2-12/+35
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
2012-03-07openvswitch: Fix checksum update for actions on UDP packets.Jesse Gross1-12/+32
When modifying IP addresses or ports on a UDP packet we don't correctly follow the rules for unchecksummed packets. This meant that packets without a checksum can be given a incorrect new checksum and packets with a checksum can become marked as being unchecksummed. This fixes it to handle those requirements. Signed-off-by: Jesse Gross <jesse@nicira.com>
2012-03-07Merge branch 'for-davem' of ↵David S. Miller3-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-03-07regulator: tps65910: Configure correct value for VDDCTRL vout regLaxman Dewangan1-1/+1
As per datasheet, the voltage output is defined as from SEL[6:0] = 3 to 64 (dec) Vout= (SEL[6:0] × 12.5 mV + 562.5 mV) The list_voltage returns the vout as 600mV + selector * 12.5mV and so equivalent VSEL is selector + 3. Adding 3 on selector when configuring VSEL register for VDDCTRL output. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-07dm raid: fix flush supportJonathan E Brassow1-0/+1
Fix dm-raid flush support. Both md and dm have support for flush, but the dm-raid target forgot to set the flag to indicate that flushes should be passed on. (Important for data integrity e.g. with writeback cache enabled.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm raid: set MD_CHANGE_DEVS when rebuildingJonathan E Brassow1-6/+10
The 'rebuild' parameter is used to rebuild individual devices in an array (e.g. resynchronize a RAID1 device or recalculate a parity device in higher RAID). The MD_CHANGE_DEVS flag must be set when this parameter is given in order to write out the superblocks and make the change take immediate effect. The code that handles new devices in super_load already sets MD_CHANGE_DEVS and 'FirstUse'. (The 'FirstUse' flag was being set as a special case for rebuilds in super_init_validation.) Add a condition for rebuilds in super_load to take care of both flags without the special case in 'super_init_validation'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm thin metadata: decrement counter after removing mapped blockJoe Thornber1-0/+2
Correct the number of mapped sectors shown on a thin device's status line by decrementing td->mapped_blocks in __remove() each time a block is removed. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm thin metadata: unlock superblock in init_pmd error pathJoe Thornber1-0/+1
If dm_sm_disk_create() fails the superblock must be unlocked. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm thin metadata: remove incorrect close_device on creation error pathsMike Snitzer1-5/+17
The __open_device() error paths in __create_thin() and __create_snap() incorrectly call __close_device() even if td was not initialized by __open_device(). Remove this. Also document __open_device() return values, remove a redundant td->changed = 1 in __create_thin(), and insert an additional safeguard against creating an already-existing device. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm flakey: fix crash on read when corrupt_bio_byte not setMike Snitzer1-1/+1
The following BUG is hit on the first read that is submitted to a dm flakey test device while the device is "down" if the corrupt_bio_byte feature wasn't requested when the device's table was loaded. Example DM table that will hit this BUG: 0 2097152 flakey 8:0 2048 0 30 This bug was introduced by commit a3998799fb4df0b0af8271a7d50c4269032397aa (dm flakey: add corrupt_bio_byte feature) in v3.1-rc1. BUG: unable to handle kernel paging request at ffff8801cfce3fff IP: [<ffffffffa008c233>] corrupt_bio_data+0x6e/0xae [dm_flakey] PGD 1606063 PUD 0 Oops: 0002 [#1] SMP ... Call Trace: <IRQ> [<ffffffffa008c2b5>] flakey_end_io+0x42/0x48 [dm_flakey] [<ffffffffa00dca98>] clone_endio+0x54/0xb6 [dm_mod] [<ffffffff81130587>] bio_endio+0x2d/0x2f [<ffffffff811c819a>] req_bio_endio+0x96/0x9f [<ffffffff811c94b9>] blk_update_request+0x1dc/0x3a9 [<ffffffff812f5ee2>] ? rcu_read_unlock+0x21/0x23 [<ffffffff811c96a6>] blk_update_bidi_request+0x20/0x6e [<ffffffff811c9713>] blk_end_bidi_request+0x1f/0x5d [<ffffffff811c978d>] blk_end_request+0x10/0x12 [<ffffffff8128f450>] scsi_io_completion+0x1e5/0x4b1 [<ffffffff812882a9>] scsi_finish_command+0xec/0xf5 [<ffffffff8128f830>] scsi_softirq_done+0xff/0x108 [<ffffffff811ce284>] blk_done_softirq+0x84/0x98 [<ffffffff81048d19>] __do_softirq+0xe3/0x1d5 [<ffffffff8138f83f>] ? _raw_spin_lock+0x62/0x69 [<ffffffff810997cf>] ? handle_irq_event+0x4c/0x61 [<ffffffff8139833c>] call_softirq+0x1c/0x30 [<ffffffff81003b37>] do_softirq+0x4b/0xa3 [<ffffffff81048a39>] irq_exit+0x53/0xca [<ffffffff81398acd>] do_IRQ+0x9d/0xb4 [<ffffffff81390333>] common_interrupt+0x73/0x73 ... Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm io: fix discard supportMilan Broz1-7/+16
This patch fixes a crash by recognising discards in dm_io. Currently dm_mirror can send REQ_DISCARD bios if running over a discard-enabled device and without support in dm_io the system crashes badly. BUG: unable to handle kernel paging request at 00800000 IP: __bio_add_page.part.17+0xf5/0x1e0 ... bio_add_page+0x56/0x70 dispatch_io+0x1cf/0x240 [dm_mod] ? km_get_page+0x50/0x50 [dm_mod] ? vm_next_page+0x20/0x20 [dm_mod] ? mirror_flush+0x130/0x130 [dm_mirror] dm_io+0xdc/0x2b0 [dm_mod] ... Introduced in 2.6.38-rc1 by commit 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 (dm raid1: support discard). Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@kernel.org Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm ioctl: do not leak argv if target message only contains whitespaceJesper Juhl1-1/+1
If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804Guenter Roeck3-11/+35
Also update IDT datasheet locations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07hwmon: (zl6100) Maintain delay parameter in driver instance dataGuenter Roeck1-4/+6
A global delay parameter has the side effect of being overwritten with 0 if a single ZL2004 or ZL6105 is instantiated. If other chips supported by the same driver are in the system, this will result in access errors for those chips. To solve the problem, keep a per-instance copy of the delay parameter, and do not change the original parameter. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.1+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07hwmon: (pmbus_core) Fix maximum number of POUT alarm attributesGuenter Roeck1-1/+2
There are up to three POUT alarm attributes, not two, since cap_alarm was added. Reported-by: Michele Petracca <mi.petracca@gmail.com> Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-07hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000Jean Delvare3-1/+18
These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-07Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds12-44/+75
Pull ARM updates from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7358/1: perf: add PMU hotplug notifier ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode ARM: ecard: ensure fake vma vm_flags is setup ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection ARM: 7345/1: errata: update workaround for A9 erratum #743622 ARM: 7348/1: arm/spear600: fix one-shot timer ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool
2012-03-07Merge branch 'for-linus' of ↵Linus Torvalds6-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a few driver fixups, nothing exciting." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use Input: twl4030-vibra - use proper guard for PM methods Input: evdev - fix variable initialisation Input: wacom - add missing LEDS_CLASS to Kconfig Input: ALPS - fix touchpad detection when buttons are pressed
2012-03-07Revert "CPU hotplug, cpusets, suspend: Don't touch cpusets during ↵Linus Torvalds1-2/+2
suspend/resume" This reverts commit 8f2f748b0656257153bcf0941df8d6060acc5ca6. It causes some odd regression that we have not figured out, and it's too late in the -rc series to try to figure it out now. As reported by Konstantin Khlebnikov, it causes consistent hangs on his laptop (Thinkpad x220: 2x cores + HT). They can be avoided by adding calls to "rebuild_sched_domains();" in cpuset_cpu_[in]active() for the CPU_{ONLINE/DOWN_FAILED/DOWN_PREPARE}_FROZEN cases, but it's not at all clear why, and it makes no sense. Konstantin's config doesn't even have CONFIG_CPUSETS enabled, just to make things even more interesting. So it's not the cpusets, it's just the scheduling domains. So until this is understood, revert. Bisected-reported-and-tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-07ARM: 7358/1: perf: add PMU hotplug notifierLorenzo Pieralisi1-0/+23
When a CPU is taken out of reset, either cold booted or hotplugged in, some of its PMU registers can contain UNKNOWN values. This patch adds a hotplug notifier to ARM core perf code so that upon CPU restart the PMU unit is reset and becomes ready to use again. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07ARM: 7357/1: perf: fix overflow handling for xscale2 PMUsWill Deacon1-2/+8
xscale2 PMUs indicate overflow not via the PMU control register, but by a separate overflow FLAG register instead. This patch fixes the xscale2 PMU code to use this register to detect to overflow and ensures that we clear any pending overflow when disabling a counter. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlersWill Deacon3-18/+12
The PMU IRQ handlers in perf assume that if a counter has overflowed then perf must be responsible. In the paranoid world of crazy hardware, this could be false, so check that we do have a valid event before attempting to dereference NULL in the interrupt path. Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMUWill Deacon1-0/+5
When disabling a counter on an ARMv7 PMU, we should also clear the overflow flag in case an overflow occurred whilst stopping the counter. This prevents a spurious overflow being picked up later and leading to either false accounting or a NULL dereference. Cc: <stable@vger.kernel.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling modeWill Deacon5-16/+16
On ARM, the PMU does not stop counting after an overflow and therefore IRQ latency affects the new counter value read by the kernel. This is significant for non-sampling runs where it is possible for the new value to overtake the previous one, causing the delta to be out by up to max_period events. Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency") attempted to fix this problem by allowing interrupt handlers to pass an overflow flag to the event update function, causing the overflow calculation to assume that the counter passed through zero when going from prev to new. Unfortunately, this doesn't work when overflow occurs on the perf_task_tick path because we have the flag cleared and end up computing a large negative delta. This patch removes the overflow flag from armpmu_event_update and instead limits the sample_period to half of the max_period for non-sampling profiling runs. Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-07Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in useJason Gerecke1-1/+1
The message count field uses three bits of storage, not two. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds12-31/+58
Pull networking fixes from David Miller: 1) TCP can chop up SACK'd SKBs below below the unacked send sequence and that breaks lots of stuff. Fix from Neal Cardwell. 2) There is code in ipv6 to properly join and leave the all-routers multicast code when the forwarding setting is changed, but once forwarding is turned on, we don't do the join for newly registered devices. Fix from Li Wei. 3) Netfilter's NAT module autoload in ctnetlink drops a spinlock around a sleeping call, problem is this code path doesn't actually hold that lock. Fix from Pablo Neira Ayuso. 4) TG3 uses the wrong interfaces to hook into the new byte queue limit support. It uses the device level interfaces, which is fine for single queue devices, but on more recent chips this driver supports multiqueue so we have to use the multiqueue BQL APIs. Fix from Tom Herbert. 5) r8169 resume fix from Francois Romieu. 6) Add some cxgb4 device IDs, from Vipul Pandya. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: IPv6: Fix not join all-router mcast group when forwarding set. caif-hsi: Set default MTU to 4096 cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adapters cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adapters mlx4_core: remove buggy sched_queue masking netfilter: nf_conntrack: fix early_drop with reliable event delivery bridge: netfilter: don't call iptables on vlan packets if sysctl is off netfilter: bridge: fix wrong pointer dereference netfilter: ctnetlink: remove incorrect spin_[un]lock_bh on NAT module autoload netfilter: ebtables: fix wrong name length while copying to user-space r8169: runtime resume before shutdown. tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una tg3: Fix to use multi queue BQL interfaces
2012-03-06x86: fix typo in recent find_vma_prev purgeLinus Torvalds1-1/+1
It turns out that test-compiling this file on x86-64 doesn't really help, because much of it is x86-32-specific. And so I hadn't noticed the slightly over-eager removal of the 'r' from 'addr' variable despite thinking I had tested it. Signed-off-by: Linus "oopsie" Torvalds <torvalds@linux-foundation.org>
2012-03-06vm: avoid using find_vma_prev() unnecessarilyLinus Torvalds4-4/+9
Several users of "find_vma_prev()" were not in fact interested in the previous vma if there was no primary vma to be found either. And in those cases, we're much better off just using the regular "find_vma()", and then "prev" can be looked up by just checking vma->vm_prev. The find_vma_prev() semantics are fairly subtle (see Mikulas' recent commit 83cd904d271b: "mm: fix find_vma_prev"), and the whole "return prev by reference" means that it generates worse code too. Thus this "let's avoid using this inconvenient and clearly too subtle interface when we don't really have to" patch. Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-06Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2-11/+37
Pull CIFS fixes from Steve French * git://git.samba.org/sfrench/cifs-2.6: cifs: fix dentry refcount leak when opening a FIFO on lookup CIFS: Fix mkdir/rmdir bug for the non-POSIX case
2012-03-06mm: fix find_vma_prevMikulas Patocka1-2/+10
Commit 6bd4837de96e ("mm: simplify find_vma_prev()") broke memory management on PA-RISC. After application of the patch, programs that allocate big arrays on the stack crash with segfault, for example, this will crash if compiled without optimization: int main() { char array[200000]; array[199999] = 0; return 0; } The reason is that PA-RISC has up-growing stack and the stack is usually the last memory area. In the above example, a page fault happens above the stack. Previously, if we passed too high address to find_vma_prev, it returned NULL and stored the last VMA in *pprev. After "simplify find_vma_prev" change, it stores NULL in *pprev. Consequently, the stack area is not found and it is not expanded, as it used to be before the change. This patch restores the old behavior and makes it return the last VMA in *pprev if the requested address is higher than address of any other VMA. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-06genirq: Clear action->thread_mask if IRQ_ONESHOT is not setThomas Gleixner1-6/+38
Xommit ac5637611(genirq: Unmask oneshot irqs when thread was not woken) fails to unmask when a !IRQ_ONESHOT threaded handler is handled by handle_level_irq. This happens because thread_mask is or'ed unconditionally in irq_wake_thread(), but for !IRQ_ONESHOT interrupts never cleared. So the check for !desc->thread_active fails and keeps the interrupt disabled. Keep the thread_mask zero for !IRQ_ONESHOT interrupts. Document the thread_mask magic while at it. Reported-and-tested-by: Sven Joachim <svenjoac@gmx.de> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-06openvswitch: Honor dp_ifindex, when specified, for vport lookup by name.Ben Pfaff1-0/+3
When OVS_VPORT_ATTR_NAME is specified and dp_ifindex is nonzero, the logical behavior would be for the vport name lookup scope to be limited to the specified datapath, but in fact the dp_ifindex value was ignored. This commit causes the search scope to be honored. Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 12:39:20 +0000