summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-03-25ocfs2: use c_new to indicate newly allocated extentsRyan Ding1-10/+12
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. There is a problem in ocfs2's direct io implement: if system crashed after extents allocated, and before data return, we will get a extent with dirty data on disk. This problem violate the journal=order semantics, which means meta changes take effect after data written to disk. To resolve this issue, direct write can use the UNWRITTEN flag to describe a extent during direct data writeback. The direct write procedure should act in the following order: phase 1: alloc extent with UNWRITTEN flag phase 2: submit direct data to disk, add zero page to page cache phase 3: clear UNWRITTEN flag when data has been written to disk This patch is to change the 'c_unwritten' member of ocfs2_write_cluster_desc to 'c_clear_unwritten'. Means whether to clear the unwritten flag. It do not care if a extent is allocated or not. And use 'c_new' to specify a newly allocated extent. So the direct io procedure can use c_clear_unwritten to control the UNWRITTEN bit on extent. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25ocfs2: add ocfs2_write_type_t type to identify the caller of writeRyan Ding3-13/+22
Patchset: fix ocfs2 direct io code patch to support sparse file and data ordering semantics The idea is to use buffer io(more precisely use the interface ocfs2_write_begin_nolock & ocfs2_write_end_nolock) to do the zero work beyond block size. And clear UNWRITTEN flag until direct io data has been written to disk, which can prevent data corruption when system crashed during direct write. And we will also archive a better performance: eg. dd direct write new file with block size 4KB: before this patchset: 2.5 MB/s after this patchset: 66.4 MB/s This patch (of 8): To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. Remove unused args filp & flags. Add new arg type. The type is one of buffer/direct/mmap. Indicate 3 way to perform write. buffer/mmap type has implemented. direct type will be implemented later. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25ocfs2: o2hb: fix double free bugJunxiao Bi1-2/+2
This is a regression issue and caused the following kernel panic when do ocfs2 multiple test. BUG: unable to handle kernel paging request at 00000002000800c0 IP: [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 PGD 7bbe5067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-20160225 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007a521a80 ti: ffff88007aed0000 task.ti: ffff88007aed0000 RIP: 0010:[<ffffffff81192978>] [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 RSP: 0018:ffff88007aed3a48 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001991 RDX: 0000000000001990 RSI: 00000000024000c0 RDI: 000000000001b330 RBP: ffff88007aed3a98 R08: ffff88007d29b330 R09: 00000002000800c0 R10: 0000000c51376d87 R11: ffff8800792cac38 R12: ffff88007cc30f00 R13: 00000000024000c0 R14: ffffffff811b053f R15: ffff88007aed3ce7 FS: 0000000000000000(0000) GS:ffff88007d280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000002000800c0 CR3: 000000007aeb2000 CR4: 00000000000406e0 Call Trace: __d_alloc+0x2f/0x1a0 d_alloc+0x17/0x80 lookup_dcache+0x8a/0xc0 path_openat+0x3c3/0x1210 do_filp_open+0x80/0xe0 do_sys_open+0x110/0x200 SyS_open+0x19/0x20 do_syscall_64+0x72/0x230 entry_SYSCALL64_slow_path+0x25/0x25 Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63 RIP kmem_cache_alloc+0x78/0x160 CR2: 00000002000800c0 ---[ end trace 823969e602e4aaac ]--- Fixes: a4a1dfa4bb8b("ocfs2/cluster: fix memory leak in o2hb_region_release") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25drivers/input: eliminate INPUT_COMPAT_TEST macroAndrew Morton4-9/+7
INPUT_COMPAT_TEST became much simpler after commit f4056b52845283 ("input: redefine INPUT_COMPAT_TEST as in_compat_syscall()") so we can cleanly eliminate it altogether. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom, oom_reaper: protect oom_reaper_list using simpler wayTetsuo Handa2-8/+2
"oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task" tried to protect oom_reaper_list using MMF_OOM_KILLED flag. But we can do it by simply checking tsk->oom_reaper_list != NULL. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: make oom_reaper freezableMichal Hocko1-0/+2
After "oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space" oom_reaper will call exit_oom_victim on the target task after it is done. This might however race with the PM freezer: CPU0 CPU1 CPU2 freeze_processes try_to_freeze_tasks # Allocation request out_of_memory oom_killer_disable wake_oom_reaper(P1) __oom_reap_task exit_oom_victim(P1) wait_event(oom_victims==0) [...] do_exit(P1) perform IO/interfere with the freezer which breaks the oom_killer_disable semantic. We no longer have a guarantee that the oom victim won't interfere with the freezer because it might be anywhere on the way to do_exit while the freezer thinks the task has already terminated. It might trigger IO or touch devices which are frozen already. In order to close this race, make the oom_reaper thread freezable. This will work because a) already running oom_reaper will block freezer to enter the quiescent state b) wake_oom_reaper will not wake up the reaper after it has been frozen c) the only way to call exit_oom_victim after try_to_freeze_tasks is from the oom victim's context when we know the further interference shouldn't be possible Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: make oom_reaper_list single linkedVladimir Davydov2-9/+8
Entries are only added/removed from oom_reaper_list at head so we can use a single linked list and hence save a word in task_struct. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom, oom_reaper: disable oom_reaper for oom_kill_allocating_taskMichal Hocko2-1/+7
Tetsuo has reported that oom_kill_allocating_task=1 will cause oom_reaper_list corruption because oom_kill_process doesn't follow standard OOM exclusion (aka ignores TIF_MEMDIE) and allows to enqueue the same task multiple times - e.g. by sacrificing the same child multiple times. This patch fixes the issue by introducing a new MMF_OOM_KILLED mm flag which is set in oom_kill_process atomically and oom reaper is disabled if the flag was already set. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, oom_reaper: implement OOM victims queuingMichal Hocko2-17/+22
wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, oom_reaper: report success/failureMichal Hocko1-2/+15
Inform about the successful/failed oom_reaper attempts and dump all the held locks to tell us more who is blocking the progress. [akpm@linux-foundation.org: fix CONFIG_MMU=n build] Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address spaceMichal Hocko3-27/+50
When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, oom: introduce oom reaperMichal Hocko4-13/+162
This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25sched: add schedule_timeout_idle()Andrew Morton2-0/+12
This will be needed in the patch "mm, oom: introduce oom reaper". Acked-by: Michal Hocko <mhocko@suse.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25[IA64] Enable preadv2 and pwritev2 syscalls for ia64Tony Luck3-1/+5
New system calls added in: f17d8b35452cab31a70d224964cd583fb2845449 vfs: vfs: Define new syscalls preadv2,pwritev2 Signed-off-by: Tony Luck <tony.luck@intel.com>
2016-03-25Fix permissions of drivers/power/avs/rockchip-io-domain.cRafael J. Wysocki1-0/+0
The permissions of this file were modified by commit (f447671b9e4f PM / AVS: rockchip-io: add io selectors and supplies for rk3399) by mistake, so fix them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-25libceph: use KMEM_CACHE macroGeliang Tang1-8/+2
Use KMEM_CACHE() instead of kmem_cache_create() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25ceph: use kmem_cache_zallocGeliang Tang2-2/+2
Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25rbd: use KMEM_CACHE macroGeliang Tang1-8/+2
Use KMEM_CACHE() instead of kmem_cache_create() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25ceph: use lookup request to revalidate dentryYan, Zheng2-0/+35
If dentry has no lease, ceph_d_revalidate() previously return 0. This causes VFS to invalidate the dentry and create a new dentry for later lookup. Invalidating a dentry also detach any underneath mount points. So mount point inside cephfs can disapear mystically (even the mount point is not modified by other hosts). The fix is using lookup request to revalidate dentry without lease. This can partly solve the mount points disapear issue (as long as the mount point is not modified by other hosts) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: kill ceph_get_dentry_parent_inode()Yan, Zheng2-20/+5
use vfs helper dget_parent() instead Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: fix security xattr deadlockYan, Zheng8-11/+125
When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: don't request vxattrs from MDSYan, Zheng1-2/+4
It's uselese because MDS reply does not carry any vxattr. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: fix mounting same fs multiple timesYan, Zheng1-18/+15
Now __ceph_open_session() only accepts closed client. An opened client will tigger BUG_ON(). Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: remove unnecessary NULL checkYan, Zheng1-2/+2
If page->mapping is NULL, releasepage() callback does not get called. Remove the unnecessary NULL check to make static code analysis tool happy Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: avoid updating directory inode's i_size accidentallyYan, Zheng1-0/+4
Directory inode's i_size is used by readdir cache. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: fix race during filling readdir cacheYan, Zheng1-2/+7
Readdir cache uses page cache to save dentry pointers. When adding dentry pointers to middle of a page, we need to make sure the page already exists. Otherwise the beginning part of the page will be invalid pointers. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25libceph: use sizeof_footer() moreIlya Dryomov1-16/+3
Don't open-code sizeof_footer() in read_partial_message() and ceph_msg_revoke(). Also, after switching to sizeof_footer(), it's now possible to use con_out_kvec_add() in prepare_write_message_footer(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-03-25ceph: kill ceph_empty_snapcIlya Dryomov4-34/+6
ceph_empty_snapc->num_snaps == 0 at all times. Passing such a snapc to ceph_osdc_alloc_request() (possibly through ceph_osdc_new_request()) is equivalent to passing NULL, as ceph_osdc_alloc_request() uses it only for sizing the request message. Further, in all four cases the subsequent ceph_osdc_build_request() is passed NULL for snapc, meaning that 0 is encoded for seq and num_snaps and making ceph_empty_snapc entirely useless. The two cases where it actually mattered were removed in commits 860560904962 ("ceph: avoid sending unnessesary FLUSHSNAP message") and 23078637e054 ("ceph: fix queuing inode to mdsdir's snaprealm"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: fix a wrong comparisonAnton Protopopov1-1/+1
A negative value rc compared to the positive value ENOENT in the finish_read() function. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: replace CURRENT_TIME by current_fs_time()Deepa Dinamani4-6/+6
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_fs_time() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: scattered page writebackYan, Zheng1-109/+196
This patch makes ceph_writepages_start() try using single OSD request to write all dirty pages within a strip unit. When a nonconsecutive dirty page is found, ceph_writepages_start() tries starting a new write operation to existing OSD request. If it succeeds, it uses the new operation to writeback the dirty page. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25libceph: add helper that duplicates last extent operationYan, Zheng2-0/+24
This helper duplicates last extent operation in OSD request, then adjusts the new extent operation's offset and length. The helper is for scatterd page writeback, which adds nonconsecutive dirty pages to single OSD request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: enable large, variable-sized OSD requestsIlya Dryomov3-19/+32
Turn r_ops into a flexible array member to enable large, consisting of up to 16 ops, OSD requests. The use case is scattered writeback in cephfs and, as far as the kernel client is concerned, 16 is just a made up number. r_ops had size 3 for copyup+hint+write, but copyup is really a special case - it can only happen once. ceph_osd_request_cache is therefore stuffed with num_ops=2 requests, anything bigger than that is allocated with kmalloc(). req_mempool is backed by ceph_osd_request_cache, which means either num_ops=1 or num_ops=2 for use_mempool=true - all existing users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with that. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: osdc->req_mempool should be backed by a slab poolIlya Dryomov1-2/+2
ceph_osd_request_cache was introduced a long time ago. Also, osd_req is about to get a flexible array member, which ceph_osd_request_cache is going to be aware of. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: make r_request msg_size calculation clearerIlya Dryomov1-10/+11
Although msg_size is calculated correctly, the terms are grouped in a misleading way - snaps appears to not have room for a u32 length. Move calculation closer to its use and regroup terms. No functional change. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: move r_reply_op_{len,result} into struct ceph_osd_req_opYan, Zheng3-5/+6
This avoids defining large array of r_reply_op_{len,result} in in struct ceph_osd_request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: rename ceph_osd_req_op::payload_len to indata_lenIlya Dryomov2-7/+7
Follow userspace nomenclature on this - the next commit adds outdata_len. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25ceph: remove useless BUG_ONYan, Zheng1-2/+0
ceph_osdc_start_request() never return -EOLDSNAP Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: don't enable rbytes mount option by defaultYan, Zheng2-4/+3
When rbytes mount option is enabled, directory size is recursive size. Recursive size is not updated instantly. This can cause directory size to change between successive stat(1) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: encode ctime in cap messageYan, Zheng1-4/+7
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25libceph: behave in mon_fault() if cur_mon < 0Ilya Dryomov1-14/+9
This can happen if __close_session() in ceph_monc_stop() races with a connection reset. We need to ignore such faults, otherwise it's likely we would take !hunting, call __schedule_delayed() and end up with delayed_work() executing on invalid memory, among other things. The (two!) con->private tests are useless, as nothing ever clears con->private. Nuke them. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: reschedule tick in mon_fault()Ilya Dryomov1-4/+4
Doing __schedule_delayed() in the hunting branch is pointless, as the tick will have already been scheduled by then. What we need to do instead is *reschedule* it in the !hunting branch, after reopen_session() changes hunt_mult, which affects the delay. This helps with spacing out connection attempts and avoiding things like two back-to-back attempts followed by a longer period of waiting around. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: introduce and switch to reopen_session()Ilya Dryomov1-17/+16
hunting is now set in __open_session() and cleared in finish_hunting(), instead of all around. The "session lost" message is printed not only on connection resets, but also on keepalive timeouts. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: monc hunt rate is 3s with backoff up to 30sIlya Dryomov3-9/+22
Unless we are in the process of setting up a client (i.e. connecting to the monitor cluster for the first time), apply a backoff: every time we want to reopen a session, increase our timeout by a multiple (currently 2); when we complete the connection, reduce that multipler by 50%. Mirrors ceph.git commit 794c86fd289bd62a35ed14368fa096c46736e9a2. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: monc ping rate is 10sIlya Dryomov3-9/+5
Split ping interval and ping timeout: ping interval is 10s; keepalive timeout is 30s. Make monc_ping_timeout a constant while at it - it's not actually exported as a mount option (and the rest of tick-related settings won't be either), so it's got no place in ceph_options. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: pick a different monitor when reconnectingIlya Dryomov1-28/+57
Don't try to reconnect to the same monitor when we fail to establish a session within a timeout or it's lost. For that, pick_new_mon() needs to see the old value of cur_mon, so don't clear it in __close_session() - all calls to __close_session() but one are followed by __open_session() anyway. __open_session() is only called when a new session needs to be established, so the "already open?" branch, which is now in the way, is simply dropped. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: revamp subs code, switch to SUBSCRIBE2 protocolIlya Dryomov8-95/+174
It is currently hard-coded in the mon_client that mdsmap and monmap subs are continuous, while osdmap sub is always "onetime". To better handle full clusters/pools in the osd_client, we need to be able to issue continuous osdmap subs. Revamp subs code to allow us to specify for each sub whether it should be continuous or not. Although not strictly required for the above, switch to SUBSCRIBE2 protocol while at it, eliminating the ambiguity between a request for "every map since X" and a request for "just the latest" when we don't have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now required - it's been supported since pre-argonaut (2010). Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling in before we validate the epoch and successfully install the new map can mess up mon_client sub state. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: decouple hunting and subs managementIlya Dryomov1-9/+22
Coupling hunting state with subscribe state is not a good idea. Clear hunting when we complete the authentication handshake. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: move debugfs initialization into __ceph_open_session()Ilya Dryomov2-51/+4
Our debugfs dir name is a concatenation of cluster fsid and client unique ID ("global_id"). It used to be the case that we learned global_id first, nowadays we always learn fsid first - the monmap is sent before any auth replies are. ceph_debugfs_client_init() call in ceph_monc_handle_map() is therefore never executed and can be removed. Its counterpart in handle_auth_reply() doesn't really belong there either: having to do monc->client and unlocking early to work around lockdep is a testament to that. Move it into __ceph_open_session(), where it can be called unconditionally. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25Revert "ppdev: use new parport device model"Linus Torvalds1-20/+5
This reverts commit e7223f18603374d235d8bb0398532323e5f318b9. It causes problems when a ppdev tries to register before the parport driver has been registered with the device model. That will trigger the BUG_ON(!drv->bus->p); at drivers/base/driver.c:153. The call chain is kernel_init -> kernel_init_freeable -> do_one_initcall -> ppdev_init -> __parport_register_driver -> driver_register *BOOM* Reported-by: kernel test robot <fengguang.wu@intel.com> Reported-by: Ross Zwisler <zwisler@gmail.com> Reported-by: Petr Mladek <pmladek@suse.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 07:32:06 +0000