summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-09-21scsi: ipr: System hung while dlpar adding primary ipr adapter backWen Xiong2-45/+62
While dlpar adding primary ipr adapter back, driver goes through adapter initialization then schedule ipr_worker_thread to start te disk scan by dropping the host lock, calling scsi_add_device. Then get the adapter reset request again, so driver does scsi_block_requests, this will cause the scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread to do the unblock because its stuck in scsi_add_device. This patch fixes the issue. [mkp: typo and whitespace fixes] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21scsi: target: iscsi: Use bin2hex instead of a re-implementationVincent Pelletier1-12/+3
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21scsi: target: iscsi: Use hex2bin instead of a re-implementationVincent Pelletier1-16/+14
This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20scsi: lpfc: Synchronize access to remoteport via rportJames Smart3-13/+23
The driver currently uses the ndlp to get the local rport which is then used to get the nvme transport remoteport pointer. There can be cases where a stale remoteport pointer is obtained as synchronization isn't done through the different dereferences. Correct by using locks to synchronize the dereferences. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20scsi: ufs: Disable blk-mq for nowAdrian Hunter1-0/+7
blk-mq does not support runtime pm, so disable blk-mq support for now. Fixes: d5038a13eca7 ("scsi: core: switch to scsi-mq by default") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-17scsi: sd: Contribute to randomness when running rotational deviceXuewei Zhang1-0/+3
Currently a scsi device won't contribute to kernel randomness when it uses blk-mq. Since we commonly use scsi on rotational device with blk-mq, it make sense to keep contributing to kernel randomness in these cases. This is especially important for virtual machines. commit b5b6e8c8d3b4 ("scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity") made all virtio-scsi device to use blk-mq, which does not contribute to randomness today. So for a virtual machine only having virtio-scsi disk (which is common), it will simple stop getting randomness from its disks in today's implementation. With this patch, if the above VM has rotational virtio-scsi device, then it can still benefit from the entropy generated from the disk. Reported-by: Xuewei Zhang <xueweiz@google.com> Signed-off-by: Xuewei Zhang <xueweiz@google.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-17scsi: ibmvscsis: Ensure partition name is properly NUL terminatedLaura Abbott1-1/+1
While reviewing another part of the code, Kees noticed that the strncpy of the partition name might not always be NUL terminated. Switch to using strscpy which does this safely. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-17scsi: ibmvscsis: Fix a stringop-overflow warningLaura Abbott1-2/+1
There's currently a warning about string overflow with strncat: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe': drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified bound 64 equals destination size [-Werror=stringop-overflow=] strncat(vscsi->eye, vdev->name, MAX_EYE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Switch to a single snprintf instead of a strcpy + strcat to handle this cleanly. Signed-off-by: Laura Abbott <labbott@redhat.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted()Dan Carpenter1-2/+2
We should first do the le16_to_cpu endian conversion and then apply the FCP_CMD_LENGTH_MASK mask. Fixes: 5f35509db179 ("qla2xxx: Terminate exchange if corrupted") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Quinn Tran <Quinn.Tran@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11scsi: iscsi: target: Don't use stack buffer for scatterlistLaura Abbott1-8/+14
Fedora got a bug report of a crash with iSCSI: kernel BUG at include/linux/scatterlist.h:143! ... RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod] ... Call Trace: ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod] ? native_sched_clock+0x3e/0xa0 ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod] kthread+0x120/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This is a BUG_ON for using a stack buffer with a scatterlist. There are two cases that trigger this bug. Switch to using a dynamically allocated buffer for one case and do not assign a NULL buffer in another case. Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: qedi: Add the CRC size within iSCSI NVM imageNilesh Javali2-14/+21
The QED driver commit, 1ac4329a1cff ("qed: Add configuration information to register dump and debug data"), removes the CRC length validation causing nvm_get_image failure while loading qedi driver: [qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes where only 00006004 are available [qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12 Hence add and adjust the CRC size to iSCSI NVM image to read boot info at qedi load time. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: iscsi: target: Fix conn_ops double freeMike Christie3-75/+77
If iscsi_login_init_conn fails it can free conn_ops. __iscsi_target_login_thread will then call iscsi_target_login_sess_out which will also free it. This fixes the problem by organizing conn allocation/setup into parts that are needed through the life of the conn and parts that are only needed for the login. The free functions then release what was allocated in the alloc functions. With this patch we have: iscsit_alloc_conn/iscsit_free_conn - allocs/frees the conn we need for the entire life of the conn. iscsi_login_init_conn/iscsi_target_nego_release - allocs/frees the parts of the conn that are only needed during login. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values ↵Vincent Pelletier1-5/+3
fails Fixes a use-after-free reported by KASAN when later iscsi_target_login_sess_out gets called and it tries to access conn->sess->se_sess: Disabling lock debugging due to kernel taint iSCSI Login timeout on Network Portal [::]:3260 iSCSI Login negotiation failed. ================================================================== BUG: KASAN: use-after-free in iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980 CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O 4.17.8kasan.sess.connops+ #4 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod] ? __sched_text_start+0x8/0x8 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] ? __kthread_parkme+0xcc/0x100 ? parse_args.cold.14+0xd3/0xd3 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Allocated by task 980: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0x112/0x210 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 980: __kasan_slab_free+0x125/0x170 kfree+0x90/0x1d0 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 The buggy address belongs to the object at ffff880109d06f00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 456 bytes inside of 512-byte region [ffff880109d06f00, ffff880109d07100) The buggy address belongs to the page: page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 flags: 0x17fffc000008100(slab|head) raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> [rebased against idr/ida changes and to handle ret review comments from Matthew] Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: aacraid: fix a signedness bugDan Carpenter1-1/+1
The problem is that ->reset_state is a u8 but it can be set to -1 or -2 in aac_tmf_callback() and the error handling in aac_eh_target_reset() relies on it to be signed. [mkp: fixed typo] Fixes: 0d643ff3c353 ("scsi: aacraid: use aac_tmf_callback for reset fib") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"Ming Lei2-40/+7
This reverts commit 328728630d9f2bf14b82ca30b5e47489beefe361. There is fundamental issue in commit 328728630d9f2bf1 (scsi: core: avoid host-wide host_busy counter for scsi_mq) because SCSI's host busy counter may not be same with counter of blk-mq's inflight tags, especially in case of none io scheduler. We may switch to other approach for addressing this scsi_mq's performance issue, such as percpu counter or kind of ways, so revert this commit first for fixing this kind of issue in EH path, as reported by Jens. Cc: Omar Sandoval <osandov@fb.com>, Cc: "Martin K. Petersen" <martin.petersen@oracle.com>, Cc: James Bottomley <james.bottomley@hansenpartnership.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: Don Brace <don.brace@microsemi.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Laurence Oberman <loberman@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Jens Axboe <axboe@kernel.dk> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27Revert "scsi: core: fix scsi_host_queue_ready"Ming Lei1-1/+1
This reverts commit 265d59aacbce7e50bdc1f5d25033c38dd70b3767. There is fundamental issue in commit 328728630d9f2bf1 (scsi: core: avoid host-wide host_busy counter for scsi_mq) because SCSI's host busy counter may not be same with counter of blk-mq's inflight tags, especially in case of none io scheduler. So revert this commit first. Cc: Omar Sandoval <osandov@fb.com>, Cc: "Martin K. Petersen" <martin.petersen@oracle.com>, Cc: James Bottomley <james.bottomley@hansenpartnership.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: Don Brace <don.brace@microsemi.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Laurence Oberman <loberman@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jens Axboe <axboe@kernel.dk> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: libata: Add missing newline at end of fileGeert Uytterhoeven1-1/+1
With gcc 4.1.2: drivers/ata/libata-core.c:7396:33: warning: no newline at end of file Fixes: 2fa4a32613c9182b ("scsi: libsas: dynamically allocate and free ata host") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()Varun Prakash1-4/+4
DDP programming happens in data path and it can fail because of lack of resources so use pr_debug() instead of pr_info() for this case. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: hpsa: limit transfer length to 1MB, not 512kBMartin Wilck1-1/+1
e2c7b43 was supposed to limit transfer length to 1MB, but got the unit of max_sectors wrong. Fixes: e2c7b433f729 ("scsi: hpsa: limit transfer length to 1MB") Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: lpfc: Correct MDS diag and nvmet configurationJames Smart1-1/+1
A recent change added some MDS processing in the lpfc_drain_txq routine that relies on the fcp_wq being allocated. For nvmet operation the fcp_wq is not allocated because it can only be an nvme-target. When the original MDS support was added LS_MDS_LOOPBACK was defined wrong, (0x16) it should have been 0x10 (decimal value used for hex setting). This incorrect value allowed MDS_LOOPBACK to be set simultaneously with LS_NPIV_FAB_SUPPORTED, causing the driver to crash when it accesses the non-existent fcp_wq. Correct the bad value setting for LS_MDS_LOOPBACK. Fixes: ae9e28f36a6c ("lpfc: Add MDS Diagnostic support.") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Tested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: lpfc: Default fdmi_on to onJames Smart1-4/+4
Change default behavior for fdmi registration to on. [mkp: patch was mangled] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: csiostor: fix incorrect port capabilitiesVarun Prakash3-14/+48
- use be32_to_cpu() instead of ntohs() for 32 bit port capabilities. - add a new function fwcaps32_to_caps16() to convert 32 bit port capabilities to 16 bit port capabilities. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: csiostor: add a check for NULL pointer after kmalloc()Varun Prakash1-7/+9
Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: documentation: add scsi_mod.use_blk_mq to scsi-parametersJohn Pittman1-0/+5
Kernel line argument scsi_mod.use_blk_mq is missing from file Documentation/scsi/scsi-parameters.txt. Add this option, providing mention of config setting and format. [mkp: clarified where to look] Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: core: Update SCSI_MQ_DEFAULT help text to match defaultGeert Uytterhoeven1-5/+5
The default was changed, but the help text was not updated. Fix grammar (s/the option/this option/) while at it. [mkp: drop "new" as suggested by John Garry] Fixes: d5038a13eca72fb2 ("scsi: core: switch to scsi-mq by default") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-26Linux 4.19-rc1v4.19-rc1Linus Torvalds1-2/+2
2018-08-26Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer update from Thomas Gleixner: "New defines for the compat time* types so they can be shared between 32bit and 64bit builds. Not used yet, but merging them now allows the actual conversions to be merged through different maintainer trees without dependencies We still have compat interfaces for 32bit on 64bit even with the new 2038 safe timespec/val variants because pointer size is different. And for the old style timespec/val interfaces we need yet another 'compat' interface for both 32bit native and 32bit on 64bit" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: y2038: Provide aliases for compat helpers
2018-08-26Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds28-679/+485
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
2018-08-26Merge tag 'gcc-plugins-v4.19-rc1-fix' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugin fix from Kees Cook: "Lift gcc test into Kconfig. This is for better behavior when the kernel is built with Clang, reported by Stefan Agner" * tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Disable when building under Clang
2018-08-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds93-1628/+3259
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Kernel: - Improve kallsyms coverage - Add x86 entry trampolines to kcore - Fix ARM SPE handling - Correct PPC event post processing Tools: - Make the build system more robust - Small fixes and enhancements all over the place - Update kernel ABI header copies - Preparatory work for converting libtraceevnt to a shared library - License cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' tools arch x86: Update tools's copy of cpufeatures.h perf python: Fix pyrf_evlist__read_on_cpu() interface perf mmap: Store real cpu number in 'struct perf_mmap' perf tools: Remove ext from struct kmod_path perf tools: Add gzip_is_compressed function perf tools: Add lzma_is_compressed function perf tools: Add is_compressed callback to compressions array perf tools: Move the temp file processing into decompress_kmodule perf tools: Use compression id in decompress_kmodule() perf tools: Store compression id into struct dso perf tools: Add compression id into 'struct kmod_path' perf tools: Make is_supported_compression() static perf tools: Make decompress_to_file() function static perf tools: Get rid of dso__needs_decompress() call in __open_dso() perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble() perf tools: Get rid of dso__needs_decompress() call in read_object_code() tools lib traceevent: Change to SPDX License format perf llvm: Allow passing options to llc in addition to clang perf parser: Improve error message for PMU address filters ...
2018-08-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds9-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Correct the L1TF fallout on 32bit and the off by one in the 'too much RAM for protection' calculation. - Add a helpful kernel message for the 'too much RAM' case - Unbreak the VDSO in case that the compiler desides to use indirect jumps/calls and emits retpolines which cannot be resolved because the kernel uses its own thunks, which does not work for the VDSO. Make it use the builtin thunks. - Re-export start_thread() which was unexported when the 32/64bit implementation was unified. start_thread() is required by modular binfmt handlers. - Trivial cleanups * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/l1tf: Suggest what to do on systems with too much RAM x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM x86/kvm/vmx: Remove duplicate l1d flush definitions x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit x86/process: Re-export start_thread() x86/mce: Add notifier_block forward declaration x86/vdso: Fix vDSO build if a retpoline is emitted
2018-08-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds6-17/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "A small set of updats/fixes for the irq subsystem: - Allow GICv3 interrupts to be configured as wake-up sources to enable wakeup from suspend - Make the error handling of the STM32 irqchip init function work - A set of small cleanups and improvements" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Allow interrupt to be configured as wake-up sources irqchip/tango: Set irq handler and data in one go dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0 irqchip/stm32: Fix init error handling irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
2018-08-26Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull licking update from Thomas Gleixner: "Mark the switch cases which fall through to the next case with the proper comment so the fallthrough compiler checks can be enabled" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Mark expected switch fall-throughs
2018-08-25Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of ↵Linus Torvalds17-135/+481
gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm memory-failure update from Dave Jiang: "As it stands, memory_failure() gets thoroughly confused by dev_pagemap backed mappings. The recovery code has specific enabling for several possible page states and needs new enabling to handle poison in dax mappings. In order to support reliable reverse mapping of user space addresses: 1/ Add new locking in the memory_failure() rmap path to prevent races that would typically be handled by the page lock. 2/ Since dev_pagemap pages are hidden from the page allocator and the "compound page" accounting machinery, add a mechanism to determine the size of the mapping that encompasses a given poisoned pfn. 3/ Given pmem errors can be repaired, change the speculatively accessed poison protection, mce_unmap_kpfn(), to be reversible and otherwise allow ongoing access from the kernel. A side effect of this enabling is that MADV_HWPOISON becomes usable for dax mappings, however the primary motivation is to allow the system to survive userspace consumption of hardware-poison via dax. Specifically the current behavior is: mce: Uncorrected hardware memory error in user-access at af34214200 {1}[Hardware Error]: It has been corrected by h/w and requires no further action mce: [Hardware Error]: Machine check events logged {1}[Hardware Error]: event severity: corrected Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users [..] Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed mce: Memory error not recovered <reboot> ...and with these changes: Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000 Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption Memory failure: 0x20cb00: recovery action for dax page: Recovered Given all the cross dependencies I propose taking this through nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax folks" * tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pmem: Restore page attributes when clearing errors x86/memory_failure: Introduce {set, clear}_mce_nospec() x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses mm, memory_failure: Teach memory_failure() about dev_pagemap pages filesystem-dax: Introduce dax_lock_mapping_entry() mm, memory_failure: Collect mapping size in collect_procs() mm, madvise_inject_error: Let memory_failure() optionally take a page reference mm, dev_pagemap: Do not clear ->mapping on final put mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages filesystem-dax: Set page->index device-dax: Set page->index device-dax: Enable page_mapping() device-dax: Convert to vmf_insert_mixed and vm_fault_t
2018-08-25Merge tag 'libnvdimm-for-4.19_misc' of ↵Linus Torvalds19-90/+270
gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dave Jiang: "Collection of misc libnvdimm patches for 4.19 submission: - Adding support to read locked nvdimm capacity. - Change test code to make DSM failure code injection an override. - Add support for calculate maximum contiguous area for namespace. - Add support for queueing a short ARS when there is on going ARS for nvdimm. - Allow NULL to be passed in to ->direct_access() for kaddr and pfn params. - Improve smart injection support for nvdimm emulation testing. - Fix test code that supports for emulating controller temperature. - Fix hang on error before devm_memremap_pages() - Fix a bug that causes user memory corruption when data returned to user for ars_status. - Maintainer updates for Ross Zwisler emails and adding Jan Kara to fsdax" * tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: fix ars_status output length calculation device-dax: avoid hang on error before devm_memremap_pages() tools/testing/nvdimm: improve emulation of smart injection filesystem-dax: Do not request kaddr and pfn when not required md/dm-writecache: Don't request pointer dummy_addr when not required dax/super: Do not request a pointer kaddr when not required tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access() s390, dcssblk: kaddr and pfn can be NULL to ->direct_access() libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access() acpi/nfit: queue issuing of ars when an uc error notification comes in libnvdimm: Export max available extent libnvdimm: Use max contiguous area for namespace size MAINTAINERS: Add Jan Kara for filesystem DAX MAINTAINERS: update Ross Zwisler's email address tools/testing/nvdimm: Fix support for emulating controller temperature tools/testing/nvdimm: Make DSM failure code injection an override acpi, nfit: Prefer _DSM over _LSR for namespace label reads libnvdimm: Introduce locked DIMM capacity support
2018-08-25Merge tag 'armsoc-late' of ↵Linus Torvalds20-30/+257
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
2018-08-25Merge tag 'kbuild-v4.19-2' of ↵Linus Torvalds52-209/+188
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile
2018-08-25Merge tag 'for-linus-20180825' of git://git.kernel.dk/linux-blockLinus Torvalds3-22/+38
Pull block fixes from Jens Axboe: "A few small fixes for this merge window: - Locking imbalance fix for bcache (Shan Hai) - A few small fixes for wbt. One is a cleanup/prep, one is a fix for an existing issue, and the last two are fixes for changes that went into this merge window (me)" * tag 'for-linus-20180825' of git://git.kernel.dk/linux-block: blk-wbt: don't maintain inflight counts if disabled blk-wbt: fix has-sleeper queueing check blk-wbt: use wq_has_sleeper() for wq active check blk-wbt: move disable check into get_limit() bcache: release dc->writeback_lock properly in bch_writeback_thread()
2018-08-25Merge tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifsLinus Torvalds1-0/+0
Pull UBIFS fix from Richard Weinberger: "Remove an empty file from UBIFS source" * tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifs: ubifs: Remove empty file.h
2018-08-25Merge tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-5/+30
Pull cifs fixes from Steve French: "Three small SMB3 fixes, one for stable" * tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko to 2.12 cifs: check kmalloc before use cifs: check if SMB2 PDU size has been padded and suppress the warning cifs: create a define for how many iovs we need for an SMB2_open()
2018-08-25mm/cow: don't bother write protecting already write-protected pagesLinus Torvalds1-1/+1
This is not normally noticeable, but repeated forks are unnecessarily expensive because they repeatedly dirty the parent page tables during the page table copy operation. It's trivial to just avoid write protecting the page table entry if it was already not writable. This patch was inspired by https://bugzilla.kernel.org/show_bug.cgi?id=200447 which points to an ancient "waste time re-doing fork" issue in the presence of lots of signals. That bug was fixed by Eric Biederman's signal handling series culminating in commit c3ad2c3b02e9 ("signal: Don't restart fork when signals come in"), but the unnecessary work for repeated forks is still work just fixing, particularly since the fix is trivial. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-25hpfs: remove unnecessary checks on the value of r when assigning error codeColin Ian King1-1/+1
At the point where r is being checked for different values, r is always going to be equal to 2 as the previous if statements jump to end or end1 if r is not 2. Hence the assignment to err can be simplified to just err an assignment without any checks on the value or r. Detected by CoverityScan, CID#1226737 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-25libata: maintainership updateJens Axboe1-3/+3
Tejun Heo wrote: > > I asked Jens whether he could take care of the libata tree and he > thankfully agreed, so, from now on, Jens will be the libata > maintainer. > > Thanks a lot! Thanks for your work in this area. I still remember the first linux storage summit we did in Vancouver 2001, Tejun was invited to talk about his libata error handling work. Before that, it was basically a crap shoot if we recovered properly or not... A lot of water has flown under the bridge since then! Here's an "official" patch. Linus, can you apply it? Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-24Merge branch 'for-4.19' of ↵Linus Torvalds35-126/+166
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting. Mostly ahci and ahci_platform changes, many around power management" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ata: ahci_platform: enable to get and control reset ata: libahci_platform: add reset control support ata: add an extra argument to ahci_platform_get_resources() ata: sata_rcar: Add r8a77965 support ata: sata_rcar: exclude setting of PHY registers in Gen3 ata: sata_rcar: really mask all interrupts on Gen2 and later Revert "ata: ahci_platform: allow disabling of hotplug to save power" ata: libahci: Allow reconfigure of DEVSLP register ata: libahci: Correct setting of DEVSLP register ata: ahci: Enable DEVSLP by default on x86 with SLP_S0 ata: ahci: Support state with min power but Partial low power state Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc" ata: sata_rcar: Add rudimentary Runtime PM support ata: sata_rcar: Provide a short-hand for &pdev->dev ata: Only output sg element mapped number in verbose debug ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG ata: ahci_platform: convert kcalloc to devm_kcalloc ata: ahci_platform: convert kzallloc to kcalloc ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown libata: remove ata_sff_data_xfer_noirq() ...
2018-08-24Merge branch 'for-4.19' of ↵Linus Torvalds4-31/+58
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Just one commit from Steven to take out spin lock from trace event handlers" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/tracing: Move taking of spin lock out of trace event handlers
2018-08-24Merge branch 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-15/+30
Pull workqueue updates from Tejun Heo: "Over the lockdep cross-release churn, workqueue lost some of the existing annotations. Johannes Berg restored it and also improved them" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: re-add lockdep dependencies for flushing workqueue: skip lockdep wq dependency in cancel_work_sync()
2018-08-24Merge tag 'iommu-updates-v4.19' of ↵Linus Torvalds36-277/+839
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - PASID table handling updates for the Intel VT-d driver. It implements a global PASID space now so that applications usings multiple devices will just have one PASID. - A new config option to make iommu passthroug mode the default. - New sysfs attribute for iommu groups to export the type of the default domain. - A debugfs interface (for debug only) usable by IOMMU drivers to export internals to user-space. - R-Car Gen3 SoCs support for the ipmmu-vmsa driver - The ARM-SMMU now aborts transactions from unknown devices and devices not attached to any domain. - Various cleanups and smaller fixes all over the place. * tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits) iommu/omap: Fix cache flushes on L2 table entries iommu: Remove the ->map_sg indirection iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel iommu/arm-smmu-v3: Prevent any devices access to memory without registration iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA iommu/ipmmu-vmsa: Clarify supported platforms iommu/ipmmu-vmsa: Fix allocation in atomic context iommu: Add config option to set passthrough as default iommu: Add sysfs attribyte for domain type iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register iommu/arm-smmu: Error out only if not enough context interrupts iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE iommu/io-pgtable-arm: Fix pgtable allocation in selftest iommu/vt-d: Remove the obsolete per iommu pasid tables iommu/vt-d: Apply per pci device pasid table in SVA iommu/vt-d: Allocate and free pasid table iommu/vt-d: Per PCI device pasid table interfaces iommu/vt-d: Add for_each_device_domain() helper iommu/vt-d: Move device_domain_info to header iommu/vt-d: Apply global PASID in SVA ...
2018-08-24Merge branch 'next' of ↵Linus Torvalds4-12/+28
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add Daniel Lezcano as the reviewer of thermal framework and SoC driver changes (Daniel Lezcano). - Fix a bug in intel_dts_soc_thermal driver, which does not translate IO-APIC GSI (Global System Interrupt) into Linux irq number (Hans de Goede). - For device tree bindings, allow cooling devices sharing same trip point with same contribution value to share cooling map (Viresh Kumar). * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: dt-bindings: thermal: Allow multiple devices to share cooling map MAINTAINERS: Add Daniel Lezcano as designated reviewer for thermal Thermal: Intel SoC DTS: Translate IO-APIC GSI number to linux irq number
2018-08-24Merge tag 'apparmor-pr-2018-08-23' of ↵Linus Torvalds7-44/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "There is nothing major this time just four bug fixes and a patch to remove some dead code: Cleanups: - remove no-op permission check in policy_unpack Bug fixes: - fix an error code in __aa_create_ns() - fix failure to audit context info in build_change_hat - check buffer bounds when mapping permissions mask - fully initialize aa_perms struct when answering userspace query" * tag 'apparmor-pr-2018-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: remove no-op permission check in policy_unpack apparmor: fix an error code in __aa_create_ns() apparmor: Fix failure to audit context info in build_change_hat apparmor: Fully initialize aa_perms struct when answering userspace query apparmor: Check buffer bounds when mapping permissions mask
2018-08-24Merge tag 'powerpc-4.19-2' of ↵Linus Torvalds16-75/+170
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - An implementation for the newly added hv_ops->flush() for the OPAL hvc console driver backends, I forgot to apply this after merging the hvc driver changes before the merge window. - Enable all PCI bridges at boot on powernv, to avoid races when multiple children of a bridge try to enable it simultaneously. This is a workaround until the PCI core can be enhanced to fix the races. - A fix to query PowerVM for the correct system topology at boot before initialising sched domains, seen in some configurations to cause broken scheduling etc. - A fix for pte_access_permitted() on "nohash" platforms. - Two commits to fix SIGBUS when using remap_pfn_range() seen on Power9 due to a workaround when using the nest MMU (GPUs, accelerators). - Another fix to the VFIO code used by KVM, the previous fix had some bugs which caused guests to not start in some configurations. - A handful of other minor fixes. Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Christophe Leroy, Hari Bathini, Luke Dashjr, Mahesh Salgaonkar, Nicholas Piggin, Paul Mackerras, Srikar Dronamraju. * tag 'powerpc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mce: Fix SLB rebolting during MCE recovery path. KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pages powerpc/mm/radix: Only need the Nest MMU workaround for R -> RW transition powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid. powerpc/nohash: fix pte_access_permitted() powerpc/topology: Get topology for shared processors at boot powerpc64/ftrace: Include ftrace.h needed for enable/disable calls powerpc/powernv/pci: Work around races in PCI bridge enabling powerpc/fadump: cleanup crash memory ranges support powerpc/powernv: provide a console flush operation for opal hvc driver powerpc/traps: Avoid rate limit messages from show unhandled signals powerpc/64s: Fix PACA_IRQ_HARD_DIS accounting in idle_power4()
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 15:15:39 +0000