summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-04-22netlabel: Kconfig: Update reference for NetLabel Tools projectSalvatore Bonaccorso1-1/+1
The NetLabel Tools project has moved from http://netlabel.sf.net to a GitHub project. Update to directly refer to the new home for the tools. Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22MAINTAINERS: update dpaa2-eth maintainer listIoana Ciornei1-0/+1
Add myself as another maintainer of dpaa2-eth. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22mptcp: fix data_fin handing in RX pathPaolo Abeni1-2/+1
The data fin flag is set only via a DSS option, but mptcp_incoming_options() copies it unconditionally from the provided RX options. Since we do not clear all the mptcp sock RX options in a socket free/alloc cycle, we can end-up with a stray data_fin value while parsing e.g. MPC packets. That would lead to mapping data corruption and will trigger a few WARN_ON() in the RX path. Instead of adding a costly memset(), fetch the data_fin flag only for DSS packets - when we always explicitly initialize such bit at option parsing time. Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22vrf: Fix IPv6 with qdisc and xfrmDavid Ahern1-2/+2
When a qdisc is attached to the VRF device, the packet goes down the ndo xmit function which is setup to send the packet back to the VRF driver which does a lookup to send the packet out. The lookup in the VRF driver is not considering xfrm policies. Change it to use ip6_dst_lookup_flow rather than ip6_route_output. Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22Documentation: add documentation of ping_group_rangeStephen Hemminger1-0/+7
Support for non-root users to send ICMP ECHO requests was added back in Linux 3.0 kernel, but the documentation for the sysctl to enable it has been missing. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22Merge branch 'sctp-fixes'David S. Miller2-4/+8
Jere Leppänen says: ==================== sctp: Fix problems with peer restart when in SHUTDOWN-PENDING state and socket is closed These patches are related to the scenario described in commit bdf6fa52f01b ("sctp: handle association restarts when the socket is closed."). To recap, when our association is in SHUTDOWN-PENDING state and we've closed our one-to-one socket, while the peer crashes without being detected, restarts and reconnects using the same addresses and ports, we start association shutdown. In this case, Cumulative TSN Ack in the SHUTDOWN that we send has always been incorrect. Additionally, bundling of the SHUTDOWN with the COOKIE-ACK was broken by a later commit. This series fixes both of these issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22sctp: Fix SHUTDOWN CTSN Ack in the peer restart caseJere Leppänen1-1/+5
When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22sctp: Fix bundling of SHUTDOWN with COOKIE-ACKJere Leppänen1-3/+3
When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them at the same time and in the correct order. This bundling was broken by commit 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc"), which assigns a transport for the COOKIE-ACK, but not for the SHUTDOWN. Fix this by passing a reference to the COOKIE-ACK chunk as an argument to sctp_sf_do_9_2_start_shutdown() and onward to sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same transport as the COOKIE-ACK chunk, which allows them to be bundled. In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was previously unused. Now that we're taking it into use, it must be a valid pointer to a chunk, or NULL. There is only one call site where it's not, in sctp_sf_autoclose_timer_expire(). Fix that too. Fixes: 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: don't fail to probe if we couldn't set the MTUVladimir Oltean1-5/+3
There is no reason to fail the probing of the switch if the MTU couldn't be configured correctly (either the switch port itself, or the host port) for whatever reason. MTU-sized traffic probably won't work, sure, but we can still probably limp on and support some form of communication anyway, which the users would probably appreciate more. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22sched: etf: do not assume all sockets are full blownEric Dumazet1-3/+4
skb->sk does not always point to a full blown socket, we need to use sk_fullsock() before accessing fields which only make sense on full socket. BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141 Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630 CPU: 1 PID: 9630 Comm: syz-executor.5 Not tainted 5.7.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382 __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 report_sock_error+0x286/0x300 net/sched/sch_etf.c:141 etf_enqueue_timesortedlist+0x389/0x740 net/sched/sch_etf.c:170 __dev_xmit_skb net/core/dev.c:3710 [inline] __dev_queue_xmit+0x154a/0x30a0 net/core/dev.c:4021 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0xfb5/0x25b0 net/ipv6/ip6_output.c:117 __ip6_finish_output+0x442/0xab0 net/ipv6/ip6_output.c:143 ip6_finish_output+0x34/0x1f0 net/ipv6/ip6_output.c:153 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x239/0x810 net/ipv6/ip6_output.c:176 dst_output include/net/dst.h:435 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_xmit+0xe1a/0x2090 net/ipv6/ip6_output.c:280 tcp_v6_send_synack+0x4e7/0x960 net/ipv6/tcp_ipv6.c:521 tcp_rtx_synack+0x10d/0x1a0 net/ipv4/tcp_output.c:3916 inet_rtx_syn_ack net/ipv4/inet_connection_sock.c:669 [inline] reqsk_timer_handler+0x4c2/0xb40 net/ipv4/inet_connection_sock.c:763 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1405 expire_timers kernel/time/timer.c:1450 [inline] __run_timers kernel/time/timer.c:1774 [inline] __run_timers kernel/time/timer.c:1741 [inline] run_timer_softirq+0x623/0x1600 kernel/time/timer.c:1787 __do_softirq+0x26c/0x9f7 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x192/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x19e/0x600 arch/x86/kernel/apic/apic.c:1140 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:des_encrypt+0x157/0x9c0 lib/crypto/des.c:792 Code: 85 22 06 00 00 41 31 dc 41 8b 4d 04 44 89 e2 41 83 e4 3f 4a 8d 3c a5 60 72 72 88 81 e2 3f 3f 3f 3f 48 89 f8 48 c1 e8 03 31 d9 <0f> b6 34 28 48 89 f8 c1 c9 04 83 e0 07 83 c0 03 40 38 f0 7c 09 40 RSP: 0018:ffffc90003b5f6c0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff10e4e55 RBX: 00000000d2f846d0 RCX: 00000000d2f846d0 RDX: 0000000012380612 RSI: ffffffff839863ca RDI: ffffffff887272a8 RBP: dffffc0000000000 R08: ffff888091d0a380 R09: 0000000000800081 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000012 R13: ffff8880a8ae8078 R14: 00000000c545c93e R15: 0000000000000006 cipher_crypt_one crypto/cipher.c:75 [inline] crypto_cipher_encrypt_one+0x124/0x210 crypto/cipher.c:82 crypto_cbcmac_digest_update+0x1b5/0x250 crypto/ccm.c:830 crypto_shash_update+0xc4/0x120 crypto/shash.c:119 shash_ahash_update+0xa3/0x110 crypto/shash.c:246 crypto_ahash_update include/crypto/hash.h:547 [inline] hash_sendmsg+0x518/0xad0 crypto/algif_hash.c:102 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x308/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmmsg+0x195/0x480 net/socket.c:2506 __do_sys_sendmmsg net/socket.c:2535 [inline] __se_sys_sendmmsg net/socket.c:2532 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2532 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f6d9528ec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004fc080 RCX: 000000000045c829 RDX: 0000000000000001 RSI: 0000000020002640 RDI: 0000000000000004 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000008d7 R14: 00000000004cb7aa R15: 00007f6d9528f6d4 Fixes: 4b15c7075352 ("net/sched: Make etf report drops on error_queue") Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22selftests: Fix suppress test in fib_tests.shDavid Ahern1-2/+8
fib_tests is spewing errors: ... Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ping: connect: Network is unreachable Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ... Each test entry in fib_tests is supposed to do its own setup and cleanup. Right now the $IP commands in fib_suppress_test are failing because there is no ns1. Add the setup/cleanup and logging expected for each test. Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22Merge branch 'net-dsa-b53-Various-ARL-fixes'David S. Miller2-7/+39
Florian Fainelli says: ==================== net: dsa: b53: Various ARL fixes This patch series fixes a number of short comings in the existing b53 driver ARL management logic in particular: - we were not looking up the {MAC,VID} tuples against their VID, despite having VLANs enabled - the MDB entries (multicast) would lose their validity as soon as a single port in the vector would leave the entry - the ARL was currently under utilized because we would always place new entries in bin index #1, instead of using all possible bins available, thus reducing the ARL effective size by 50% or 75% depending on the switch generation - it was possible to overwrite the ARL entries because no proper space verification was done This patch series addresses all of these issues. Changes in v2: - added a new patch to correctly flip invidual VLAN learning vs. shared VLAN learning depending on the global VLAN state - added Andrew's R-b tags for patches which did not change - corrected some verbosity and minor issues in patch #4 to match caller expectations, also avoid a variable length DECLARE_BITMAP() call ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVLFlorian Fainelli2-0/+5
Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: Rework ARL bin logicFlorian Fainelli2-4/+29
When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: Fix ARL register definitionsFlorian Fainelli1-2/+2
The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: Fix valid setting for MDB entriesFlorian Fainelli1-1/+0
When support for the MDB entries was added, the valid bit was correctly changed to be assigned depending on the remaining port bitmask, that is, if there were no more ports added to the entry's port bitmask, the entry now becomes invalid. There was another assignment a few lines below that would override this which would invalidate entries even when there were still multiple ports left in the MDB entry. Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: dsa: b53: Lookup VID in ARL searches when VLAN is enabledFlorian Fainelli1-0/+3
When VLAN is enabled, and an ARL search is issued, we also need to compare the full {MAC,VID} tuple before returning a successful search result. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22Merge branch 'vrf-looping'David S. Miller3-6/+4
David Ahern says: ==================== net: Fix looping with vrf, xfrms and qdisc on VRF Trev reported that use of VRFs with xfrms is looping when a qdisc is added to the VRF device. The combination of xfrm + qdisc is not handled by the VRF driver which lost track that it has already seen the packet. The XFRM_TRANSFORMED flag is used by the netfilter code for a similar purpose, so re-use for VRF. Patch 1 drops the #ifdef around setting the flag in the xfrm output functions. Patch 2 adds a check to the VRF driver for flag; if set the packet has already passed through the VRF driver once and does not need to recirculated a second time. This is a day 1 bug with VRFs; stable wise, I would only take this back to 4.14. I have a set of test cases which I will submit to net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22vrf: Check skb for XFRM_TRANSFORMED flagDavid Ahern1-2/+4
To avoid a loop with qdiscs and xfrms, check if the skb has already gone through the qdisc attached to the VRF device and then to the xfrm layer. If so, no need for a second redirect. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Trev Larock <trev@larock.ca> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finishDavid Ahern2-4/+0
IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by xfrm code to tell other skb handlers that the packet has been passed through the xfrm output functions. Simplify the code and just always set them rather than conditionally based on netfilter enabled thus making the flag available for other users. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22ipv6: ndisc: RFC-ietf-6man-ra-pref64-09 is now published as RFC8781Maciej Żenczykowski1-1/+1
See: https://www.rfc-editor.org/authors/rfc8781.txt Cc: Erik Kline <ek@google.com> Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Michael Haro <mharo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Fixes: c24a77edc9a7 ("ipv6: ndisc: add support for 'PREF64' dns64 prefix identifier") Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.Yuiko Oshino1-0/+171
lan87xx_phy_init() initializes the lan87xx phy hardware including its TC10 Wake-up and Sleep features. Fixes: 3e50d2da5850 ("Add driver for Microchip LAN87XX T1 PHYs") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> v0->v1: - Add more details in the commit message and source comments. - Update to the latest initialization sequences. - Add access_ereg_modify_changed(). - Fix access_ereg() to access SMI bank correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21net: stmmac: Enable SERDES power up/down sequenceVoon Weifeng4-0/+237
This patch is to enable Intel SERDES power up/down sequence. The SERDES converts 8/10 bits data to SGMII signal. Below is an example of HW configuration for SGMII mode. The SERDES is located in the PHY IF in the diagram below. <-----------------GBE Controller---------->|<--External PHY chip--> +----------+ +----+ +---+ +----------+ | EQoS | <-GMII->| DW | < ------ > |PHY| <-SGMII-> | External | | MAC | |xPCS| |IF | | PHY | +----------+ +----+ +---+ +----------+ ^ ^ ^ ^ | | | | +---------------------MDIO-------------------------+ PHY IF configuration and status registers are accessible through mdio address 0x15 which is defined as mdio_adhoc_addr. During D0, The driver will need to power up PHY IF by changing the power state to P0. Likewise, for D3, the driver sets PHY IF power state to P3. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21net: broadcom: convert to devm_platform_ioremap_resource_byname()Dejin Zheng1-22/+11
Use the function devm_platform_ioremap_resource_byname() to simplify source code which calls the functions platform_get_resource_byname() and devm_ioremap_resource(). Remove also a few error messages which became unnecessary with this software refactoring. Suggested-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21macvlan: fix null dereference in macvlan_device_event()Taehee Yoo1-1/+1
In the macvlan_device_event(), the list_first_entry_or_null() is used. This function could return null pointer if there is no node. But, the macvlan module doesn't check the null pointer. So, null-ptr-deref would occur. bond0 | +----+-----+ | | macvlan0 macvlan1 | | dummy0 dummy1 The problem scenario. If dummy1 is removed, 1. ->dellink() of dummy1 is called. 2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module. 3. ->dellink() of macvlan1 is called. 4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module. 5. __bond_release_one() is called and it internally calls dev_set_mac_address(). 6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1, which is macvlan_set_mac_address(). 7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1. 8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module. 9. In the macvlan_device_event(), it calls list_first_entry_or_null(). At this point, dummy1 and macvlan1 were removed. So, list_first_entry_or_null() will return NULL. Test commands: ip netns add nst ip netns exec nst ip link add bond0 type bond for i in {0..10} do ip netns exec nst ip link add dummy$i type dummy ip netns exec nst ip link add macvlan$i link dummy$i \ type macvlan mode passthru ip netns exec nst ip link set macvlan$i master bond0 done ip netns del nst Splat looks like: [ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI [ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532 [ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.590469][ T146] Workqueue: netns cleanup_net [ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan] [ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2 [ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246 [ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360 [ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421 [ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008 [ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a [ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000 [ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0 [ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.603443][ T146] Call Trace: [ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables] [ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan] [ 40.605212][ T146] ? __module_text_address+0x13/0x140 [ 40.605842][ T146] notifier_call_chain+0x90/0x160 [ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0 [ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.607762][ T146] ? __module_text_address+0x13/0x140 [ 40.608440][ T146] ? notifier_call_chain+0x90/0x160 [ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0 [ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0 [ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding] [ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding] [ 40.617642][ T146] ? lock_downgrade+0x730/0x730 [ 40.618218][ T146] ? check_flags.part.42+0x450/0x450 [ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670 [ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180 [ 40.620117][ T146] ? wait_for_completion+0x250/0x250 [ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding] [ 40.621460][ T146] ? __module_text_address+0x13/0x140 [ 40.622097][ T146] notifier_call_chain+0x90/0x160 [ 40.622806][ T146] rollback_registered_many+0x660/0xcf0 [ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780 [ 40.624290][ T146] ? notifier_call_chain+0x90/0x160 [ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180 [ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30 [ 40.626421][ T146] ? mutex_is_locked+0x13/0x50 [ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240 [ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0 [ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390 [ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40 [ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0 [ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0 [ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140 [ 40.631554][ T146] cleanup_net+0x441/0x890 [ ... ] Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21e1000: remove unneeded conversion to boolJason Yan1-1/+1
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/e1000/e1000_main.c:1479:44-49: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21i40e: Remove unneeded conversion to boolJason Yan1-2/+2
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_main.c:1614:52-57: WARNING: conversion to bool not needed here drivers/net/ethernet/intel/i40e/i40e_main.c:11439:52-57: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21ptp: Remove unneeded conversion to boolJason Yan1-2/+2
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/ptp/ptp_ines.c:403:55-60: WARNING: conversion to bool not needed here drivers/ptp/ptp_ines.c:404:55-60: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21cgroup, netclassid: remove double cond_reschedJiri Slaby1-3/+1
Commit 018d26fcd12a ("cgroup, netclassid: periodically release file_lock on classid") added a second cond_resched to write_classid indirectly by update_classid_task. Remove the one in write_classid. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dmitry Yakunin <zeil@yandex-team.ru> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-4/+6
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) flow_block_cb memleak in nf_flow_table_offload_del_cb(), from Roi Dayan. 2) Fix error path handling in nf_nat_inet_register_fn(), from Hillf Danton. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20Merge tag 'mlx5-fixes-2020-04-20' of ↵David S. Miller8-24/+40
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2020-04-20 Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net/mlx5e: Get the latest values from counters in switchdev modeZhu Yanjun1-1/+6
In the switchdev mode, when running "cat /sys/class/net/NIC/statistics/tx_packets", the ppcnt register is accessed to get the latest values. But currently this command can not get the correct values from ppcnt. From firmware manual, before getting the 802_3 counters, the 802_3 data layout should be set to the ppcnt register. When the command "cat /sys/class/net/NIC/statistics/tx_packets" is run, before updating 802_3 data layout with ppcnt register, the monitor counters are tested. The test result will decide the 802_3 data layout is updated or not. Actually the monitor counters do not support to monitor rx/tx stats of 802_3 in switchdev mode. So the rx/tx counters change will not trigger monitor counters. So the 802_3 data layout will not be updated in ppcnt register. Finally this command can not get the latest values from ppcnt register with 802_3 data layout. Fixes: 5c7e8bbb0257 ("net/mlx5e: Use monitor counters for update stats") Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5: Kconfig: convert imply usage to weak dependencySaeed Mahameed1-4/+4
MLX5_CORE uses the 'imply' keyword to depend on VXLAN, PTP_1588_CLOCK, MLXFW and PCI_HYPERV_INTERFACE. This was useful to force vxlan, ptp, etc.. to be reachable to mlx5 regardless of their config states. Due to the changes in the cited commit below, the semantics of 'imply' was changed to not force any restriction on the implied config. As a result of this change, the compilation of MLX5_CORE=y and VXLAN=m would result in undefined references, as VXLAN now would stay as 'm'. To fix this we change MLX5_CORE to have a weak dependency on these modules/configs and make sure they are reachable, by adding: depend on symbol || !symbol. For example: VXLAN=m MLX5_CORE=y, this will force MLX5_CORE to m Fixes: def2fbffe62c ("kconfig: allow symbols implied by y to become m") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Randy Dunlap <rdunlap@infradead.org>
2020-04-20net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overrunsMaxim Mikityanskiy4-5/+15
XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK ICOSQ. When the application floods the driver with wakeup requests by calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq, the XSK ICOSQ may overflow. Multiple NOPs are not required and won't accelerate the process, so avoid posting a second NOP if there is one already on the way. This way we also avoid increasing the queue size (which might not help anyway). Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5: CT: Change idr to xarray to protect parallel tuple id allocationPaul Blakey1-11/+12
After allowing parallel tuple insertion, we get the following trace: [ 5505.142249] ------------[ cut here ]------------ [ 5505.148155] WARNING: CPU: 21 PID: 13313 at lib/radix-tree.c:581 delete_node+0x16c/0x180 [ 5505.295553] CPU: 21 PID: 13313 Comm: kworker/u50:22 Tainted: G OE 5.6.0+ #78 [ 5505.304824] Hardware name: Supermicro Super Server/X10DRT-P, BIOS 2.0b 03/30/2017 [ 5505.313740] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_flow_table] [ 5505.323257] RIP: 0010:delete_node+0x16c/0x180 [ 5505.349862] RSP: 0018:ffffb19184eb7b30 EFLAGS: 00010282 [ 5505.356785] RAX: 0000000000000000 RBX: ffff904ac95b86d8 RCX: ffff904b6f938838 [ 5505.365190] RDX: 0000000000000000 RSI: ffff904ac954b908 RDI: ffff904ac954b920 [ 5505.373628] RBP: ffff904b4ac13060 R08: 0000000000000001 R09: 0000000000000000 [ 5505.382155] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000000 [ 5505.390527] R13: ffffb19184eb7bfc R14: ffff904b6bef5800 R15: ffff90482c1203c0 [ 5505.399246] FS: 0000000000000000(0000) GS:ffff904c2fc80000(0000) knlGS:0000000000000000 [ 5505.408621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5505.415739] CR2: 00007f5d27006010 CR3: 0000000058c10006 CR4: 00000000001626e0 [ 5505.424547] Call Trace: [ 5505.428429] idr_alloc_u32+0x7b/0xc0 [ 5505.433803] mlx5_tc_ct_entry_add_rule+0xbf/0x950 [mlx5_core] [ 5505.441354] ? mlx5_fc_create+0x23c/0x370 [mlx5_core] [ 5505.448225] mlx5_tc_ct_block_flow_offload+0x874/0x10b0 [mlx5_core] [ 5505.456278] ? mlx5_tc_ct_block_flow_offload+0x63d/0x10b0 [mlx5_core] [ 5505.464532] nf_flow_offload_tuple.isra.21+0xc5/0x140 [nf_flow_table] [ 5505.472286] ? __kmalloc+0x217/0x2f0 [ 5505.477093] ? flow_rule_alloc+0x1c/0x30 [ 5505.482117] flow_offload_work_handler+0x1d0/0x290 [nf_flow_table] [ 5505.489674] ? process_one_work+0x17c/0x580 [ 5505.494922] process_one_work+0x202/0x580 [ 5505.500082] ? process_one_work+0x17c/0x580 [ 5505.505696] worker_thread+0x4c/0x3f0 [ 5505.510458] kthread+0x103/0x140 [ 5505.514989] ? process_one_work+0x580/0x580 [ 5505.520616] ? kthread_bind+0x10/0x10 [ 5505.525837] ret_from_fork+0x3a/0x50 [ 5505.570841] ---[ end trace 07995de9c56d6831 ]--- This happens from parallel deletes/adds to idr, as idr isn't protected. Fix that by using xarray as the tuple_ids allocator instead of idr. Fixes: 7da182a998d6 ("netfilter: flowtable: Use work entry per offload command") Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5: Fix failing fw tracer allocation on s390Niklas Schnelle1-3/+3
On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc() allocation as done for the firmware tracer will always fail. Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself that copies the debug data into the trace array and there is no need for the allocation to be contiguous in physical memory. We can therefor use kvzalloc() instead of kzalloc() and get rid of the large contiguous allcoation. Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20team: fix hang in team_mode_get()Taehee Yoo1-0/+4
When team mode is changed or set, the team_mode_get() is called to check whether the mode module is inserted or not. If the mode module is not inserted, it calls the request_module(). In the request_module(), it creates a child process, which is the "modprobe" process and waits for the done of the child process. At this point, the following locks were used. down_read(&cb_lock()); by genl_rcv() genl_lock(); by genl_rcv_msc() rtnl_lock(); by team_nl_cmd_options_set() mutex_lock(&team->lock); by team_nl_team_get() Concurrently, the team module could be removed by rmmod or "modprobe -r" The __exit function of team module is team_module_exit(), which calls team_nl_fini() and it tries to acquire following locks. down_write(&cb_lock); genl_lock(); Because of the genl_lock() and cb_lock, this process can't be finished earlier than request_module() routine. The problem secenario. CPU0 CPU1 team_mode_get request_module() modprobe -r team_mode_roundrobin team <--(B) modprobe team <--(A) team_mode_roundrobin By request_module(), the "modprobe team_mode_roundrobin" command will be executed. At this point, the modprobe process will decide that the team module should be inserted before team_mode_roundrobin. Because the team module is being removed. By the module infrastructure, the same module insert/remove operations can't be executed concurrently. So, (A) waits for (B) but (B) also waits for (A) because of locks. So that the hang occurs at this point. Test commands: while : do teamd -d & killall teamd & modprobe -rv team_mode_roundrobin & done The approach of this patch is to hold the reference count of the team module if the team module is compiled as a module. If the reference count of the team module is not zero while request_module() is being called, the team module will not be removed at that moment. So that the above scenario could not occur. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20Merge branch 'mptcp-fix-races-on-accept'David S. Miller3-33/+52
Paolo Abeni says: ==================== mptcp: fix races on accept() This series includes some fixes for accept() races which may cause inconsistent MPTCP socket status and oops. Please see the individual patches for the technical details. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20mptcp: drop req socket remote_key* fieldsPaolo Abeni3-17/+19
We don't need them, as we can use the current ingress opt data instead. Setting them in syn_recv_sock() may causes inconsistent mptcp socket status, as per previous commit. Fixes: cc7972ea1932 ("mptcp: parse and emit MP_CAPABLE option according to v1 spec") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20mptcp: avoid flipping mp_capable field in syn_recv_sock()Paolo Abeni1-16/+30
If multiple CPUs races on the same req_sock in syn_recv_sock(), flipping such field can cause inconsistent child socket status. When racing, the CPU losing the req ownership may still change the mptcp request socket mp_capable flag while the CPU owning the request is cloning the socket, leaving the child socket with 'is_mptcp' set but no 'mp_capable' flag. Such socket will stay with 'conn' field cleared, heading to oops in later mptcp callback. Address the issue tracking the fallback status in a local variable. Fixes: 58b09919626b ("mptcp: create msk early") Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20mptcp: handle mptcp listener destruction via rcuFlorian Westphal1-0/+3
Following splat can occur during self test: BUG: KASAN: use-after-free in subflow_data_ready+0x156/0x160 Read of size 8 at addr ffff888100c35c28 by task mptcp_connect/4808 subflow_data_ready+0x156/0x160 tcp_child_process+0x6a3/0xb30 tcp_v4_rcv+0x2231/0x3730 ip_protocol_deliver_rcu+0x5c/0x860 ip_local_deliver_finish+0x220/0x360 ip_local_deliver+0x1c8/0x4e0 ip_rcv_finish+0x1da/0x2f0 ip_rcv+0xd0/0x3c0 __netif_receive_skb_one_core+0xf5/0x160 __netif_receive_skb+0x27/0x1c0 process_backlog+0x21e/0x780 net_rx_action+0x35f/0xe90 do_softirq+0x4c/0x50 [..] This occurs when accessing subflow_ctx->conn. Problem is that tcp_child_process() calls listen sockets' sk_data_ready() notification, but it doesn't hold the listener lock. Another cpu calling close() on the listener will then cause transition of refcount to 0. Fixes: 58b09919626bf ("mptcp: create msk early") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20cxgb4: fix large delays in PTP synchronizationRahul Lakkireddy2-21/+9
Fetching PTP sync information from mailbox is slow and can take up to 10 milliseconds. Reduce this unnecessary delay by directly reading the information from the corresponding registers. Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock arrayMarc Zyngier1-0/+1
Running with KASAN on a VIM3L systems leads to the following splat when probing the Ethernet device: ================================================================== BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8 Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139 CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G E 5.7.0-rc1-00101-g8624b7577b9c #781 Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020 Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x20/0x30 dump_stack+0xec/0x148 print_address_description.isra.12+0x70/0x35c __kasan_report+0xfc/0x1d4 kasan_report+0x4c/0x68 __asan_load4+0x9c/0xd8 _get_maxdiv+0x74/0xd8 clk_divider_bestdiv+0x74/0x5e0 clk_divider_round_rate+0x80/0x1a8 clk_core_determine_round_nolock.part.9+0x9c/0xd0 clk_core_round_rate_nolock+0xf0/0x108 clk_hw_round_rate+0xac/0xf0 clk_factor_round_rate+0xb8/0xd0 clk_core_determine_round_nolock.part.9+0x9c/0xd0 clk_core_round_rate_nolock+0xf0/0x108 clk_core_round_rate_nolock+0xbc/0x108 clk_core_set_rate_nolock+0xc4/0x2e8 clk_set_rate+0x58/0xe0 meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b] platform_drv_probe+0x78/0xd8 really_probe+0x158/0x610 driver_probe_device+0x140/0x1b0 device_driver_attach+0xa4/0xb0 __driver_attach+0xcc/0x1c8 bus_for_each_dev+0xf4/0x168 driver_attach+0x3c/0x50 bus_add_driver+0x238/0x2e8 driver_register+0xc8/0x1e8 __platform_driver_register+0x88/0x98 meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b] do_one_initcall+0xa8/0x328 do_init_module+0xe8/0x368 load_module+0x3300/0x36b0 __do_sys_finit_module+0x120/0x1a8 __arm64_sys_finit_module+0x4c/0x60 el0_svc_common.constprop.2+0xe4/0x268 do_el0_svc+0x98/0xa8 el0_svc+0x24/0x68 el0_sync_handler+0x12c/0x318 el0_sync+0x158/0x180 The buggy address belongs to the variable: div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b] Memory state around the buggy address: ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00 ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa >ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa ^ ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa ================================================================== Digging into this indeed shows that the clock divider array is lacking a final fence, and that the clock subsystems goes in the weeds. Oh well. Let's add the empty structure that indicates the end of the array. Fixes: bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20ipv6: fix restrict IPV6_ADDRFORM operationJohn Haxby1-7/+6
Commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a problem found by syzbot an unfortunate logic error meant that it also broke IPV6_ADDRFORM. Rearrange the checks so that the earlier test is just one of the series of checks made before moving the socket from IPv6 to IPv4. Fixes: b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") Signed-off-by: John Haxby <john.haxby@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: systemport: Omit superfluous error message in bcm_sysport_probe()Tang Bin1-1/+0
In the function bcm_sysport_probe(), when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: openvswitch: ovs_ct_exit to be done under ovs_lockTonghao Zhang2-2/+5
syzbot wrote: | ============================= | WARNING: suspicious RCU usage | 5.7.0-rc1+ #45 Not tainted | ----------------------------- | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!! | | other info that might help us debug this: | rcu_scheduler_active = 2, debug_locks = 1 | ... | | stack backtrace: | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Workqueue: netns cleanup_net | Call Trace: | ... | ovs_ct_exit | ovs_exit_net | ops_exit_list.isra.7 | cleanup_net | process_one_work | worker_thread To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add lockdep_ovsl_is_held as optional lockdep expression. Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Yi-Hung Wei <yihung.wei@gmail.com> Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-19netfilter: nat: fix error handling upon registering inet hookHillf Danton1-2/+2
A case of warning was reported by syzbot. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 19934 at net/netfilter/nf_nat_core.c:1106 nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19934 Comm: syz-executor.5 Not tainted 5.6.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x35 kernel/panic.c:582 report_bug+0x27b/0x2f0 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:175 [inline] fixup_bug arch/x86/kernel/traps.c:170 [inline] do_error_trap+0x12b/0x220 arch/x86/kernel/traps.c:267 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106 Code: ff df 48 c1 ea 03 80 3c 02 00 75 75 48 8b 44 24 10 4c 89 ef 48 c7 00 00 00 00 00 e8 e8 f8 53 fb e9 4d fe ff ff e8 ee 9c 16 fb <0f> 0b e9 41 fe ff ff e8 e2 45 54 fb e9 b5 fd ff ff 48 8b 7c 24 20 RSP: 0018:ffffc90005487208 EFLAGS: 00010246 RAX: 0000000000040000 RBX: 0000000000000004 RCX: ffffc9001444a000 RDX: 0000000000040000 RSI: ffffffff865c94a2 RDI: 0000000000000005 RBP: ffff88808b5cf000 R08: ffff8880a2620140 R09: fffffbfff14bcd79 R10: ffffc90005487208 R11: fffffbfff14bcd78 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 nf_nat_ipv6_unregister_fn net/netfilter/nf_nat_proto.c:1017 [inline] nf_nat_inet_register_fn net/netfilter/nf_nat_proto.c:1038 [inline] nf_nat_inet_register_fn+0xfc/0x140 net/netfilter/nf_nat_proto.c:1023 nf_tables_register_hook net/netfilter/nf_tables_api.c:224 [inline] nf_tables_addchain.constprop.0+0x82e/0x13c0 net/netfilter/nf_tables_api.c:1981 nf_tables_newchain+0xf68/0x16a0 net/netfilter/nf_tables_api.c:2235 nfnetlink_rcv_batch+0x83a/0x1610 net/netfilter/nfnetlink.c:433 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:543 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:561 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 and to quiesce it, unregister NFPROTO_IPV6 hook instead of NFPROTO_INET in case of failing to register NFPROTO_IPV4 hook. Reported-by: syzbot <syzbot+33e06702fd6cffc24c40@syzkaller.appspotmail.com> Fixes: d164385ec572 ("netfilter: nat: add inet family nat support") Cc: Florian Westphal <fw@strlen.de> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-18tcp: cache line align MAX_TCP_HEADEREric Dumazet1-1/+1
TCP stack is dumb in how it cooks its output packets. Depending on MAX_HEADER value, we might chose a bad ending point for the headers. If we align the end of TCP headers to cache line boundary, we make sure to always use the smallest number of cache lines, which always help. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18Merge branch 'mptcp-fixes'David S. Miller2-4/+37
Florian Westphal says: ==================== mptcp: fix 'attempt to release socket in state...' splats These two patches fix error handling corner-cases where inet_sock_destruct gets called for a mptcp_sk that is not in TCP_CLOSE state. This results in unwanted error printks from the network stack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18mptcp: fix 'Attempt to release TCP socket in state' warningsFlorian Westphal2-3/+12
We need to set sk_state to CLOSED, else we will get following: IPv4: Attempt to release TCP socket in state 3 00000000b95f109e IPv4: Attempt to release TCP socket in state 10 00000000b95f109e First one is from inet_sock_destruct(), second one from mptcp_sk_clone failure handling. Setting sk_state to CLOSED isn't enough, we also need to orphan sk so it has DEAD flag set. Otherwise, a very similar warning is printed from inet_sock_destruct(). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 22:58:02 +0000