summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-05-23gpio: zynq: simplifly getting drvdataShubhrajyoti Datta1-4/+2
Get the driver data directly by dev_get_drvdata. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: zynq: Remove call to platform_get_irqShubhrajyoti Datta1-4/+2
Remove the call to platform_get_irq use the cached one instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: Convert to use match_string() helperAndy Shevchenko1-5/+2
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pca953x: add example how to use interrupt-controller and gpio-controllerH. Nikolaus Schaller1-0/+33
It is not completely obvious that these are required and how to use them. So we provide a tested example. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16DTS: Bindings: pca953x add an optional vcc-supply propertyH. Nikolaus Schaller1-0/+1
Hardware can have a switchable Vcc supply, so let's add it to the bindings (the current Linux driver code already supports it). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: add more register definitions for pcal6524H. Nikolaus Schaller1-0/+6
The pcal6524 has another set of registers to fine control the interrupt handling. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: add more register definitions for pcal953xH. Nikolaus Schaller1-0/+4
PCAL chips ("L" seems to stand for "latched") have additional registers starting at address 0x40 to control the latches, interrupt mask, pull-up and pull down etc. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: convert register constants to hexH. Nikolaus Schaller1-16/+16
which makes it easier to match them with the data sheets. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: ge: Fix build warningThierry Reding1-1/+1
Casting a pointer to u16 can produce a compiler warning such as this: drivers/gpio/gpio-ge.c: In function 'gef_gpio_probe': drivers/gpio/gpio-ge.c:83:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] gc->ngpio = (u16)of_device_get_match_data(&pdev->dev); ^ Cast the pointer through a uintptr_t to avoid the warning. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpiolib: fix gpiochip_machine_hog()Dan Carpenter1-1/+1
There is a shifter vs vanilla mask bug here. We want to test if 1 << 11 is set but we're testing if 0xb is set. Fixes: 9a6c505f7df1 ("gpiolib: add hogs support for machine code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: xlp: Use of_device_get_match_data()Thierry Reding1-8/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: vf610: Use of_device_get_match_data()Thierry Reding1-3/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: ts4900: Use of_device_get_match_data()Thierry Reding1-6/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: syscon: Use of_device_get_match_data()Thierry Reding1-6/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pxa: Use of_device_get_match_data()Thierry Reding1-7/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: Use of_device_get_match_data()Thierry Reding1-6/+4
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: palmas: Use of_device_get_match_data()Thierry Reding1-5/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mxs: Use of_device_get_match_data()Thierry Reding1-3/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: ingenic: Use of_device_get_match_data()Thierry Reding1-3/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: ge: Use of_device_get_match_data()Thierry Reding1-3/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: dwapb: Use of_device_get_match_data()Thierry Reding1-7/+1
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: 74xx-mmio: Use of_device_get_match_data()Thierry Reding1-7/+2
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mockup: use the SPDX identifier and remove license boilerplateBartosz Golaszewski1-6/+1
Use the SPDX license identifier for GPLv2.0 or later and remove the license boilerplate. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: dwapb: Add support for 1 interrupt per port A GPIOPhil Edworthy4-13/+48
The DesignWare GPIO IP can be configured for either 1 interrupt or 1 per GPIO in port A, but the driver currently only supports 1 interrupt. See the DesignWare DW_apb_gpio Databook description of the 'GPIO_INTR_IO' parameter. This change allows the driver to work with up to 32 interrupts, it will get as many interrupts as specified in the DT 'interrupts' property. It doesn't do anything clever with the different interrupts, it just calls the same handler used for single interrupt hardware. ACPI companion code provided by Hoan Tran <hotran@apm.com>. This was tested on X-Gene by Hoan. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: make several const arrays static, shrinks object sizeColin Ian King2-2/+2
Don't populate the const read-only arrays 'port' on the stack but instead make them static. Makes the object code smaller: Before: text data bss dec hex filename 8542 4088 672 13302 33f6 drivers/gpio/gpio-gpio-mm.o 10959 4952 832 16743 4167 drivers/gpio/gpio-104-dio-48e.o 9022 5064 1408 15494 3c86 drivers/gpio/gpio-104-idi-48.o After: text data bss dec hex filename 8372 4144 672 13188 3384 drivers/gpio/gpio-gpio-mm.o 10790 5008 832 16630 40f6 drivers/gpio/gpio-104-dio-48e.o 8853 5152 1408 15413 3c35 linux/drivers/gpio/gpio-104-idi-48.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16dt-bindings: gpio: Add support for r8a77965Jacopo Mondi1-0/+1
Add compatible string for R-Car M3-N (r8a77965) in gpio-rcar. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mxc: Remove reliance on <linux/gpio.h>Linus Walleij1-6/+3
This is a driver so we should only include <linux/gpio/driver.h>. However this driver was using gpio_get_value() to fetch the current value of a GPIO used as IRQ line to determine trigger direction, so we need a better way than looping over the global GPIO numberspace. Fix this by just calling the .get() function in the GPIO chip, as we don't want to end up creating a consumer dependency on ourselves. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mvebu: Use the proper APIsLinus Walleij1-12/+8
The MVEBU driver is requesting GPIO descriptors from itself, which is fine, but we have proper APIs to do this in a controlled way, so stop calling into the private functions of the GPIO library and use the gpiochip_* functions instead. Only include <linux/gpio/driver.h> and <linux/gpio/consumer.h> since we are both producers and consumers in this case. Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: msic: Include the right headerLinus Walleij1-1/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mm-lantiq: Include the right headerLinus Walleij1-1/+1
This is a driver so include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: ml_ioh: Include the right headerLinus Walleij1-1/+1
This is a driver so include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mc9s08dz60: Include the right headerLinus Walleij1-1/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mc33880: Include the right headerLinus Walleij1-1/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: max730x: Include the right headerLinus Walleij1-1/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: lynxpoint: Include the right headerLinus Walleij1-1/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: lpc32xx: Include the right headerLinus Walleij1-2/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: lp873x: Include the right headerLinus Walleij1-1/+1
This is a driver so include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: lp3943: Include the right headerLinus Walleij1-1/+1
This is a driver so only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: loongson: Use BIT() macrosLinus Walleij1-14/+11
This switches the Loongson driver over to using the bitops BIT() macros and drops some local variables and make the code easier to read (in my opinion). Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: loongson: Create a dynamic platform deviceLinus Walleij1-10/+37
It is pretty helpful to create some kind of device for backing the GPIO chips, especially when preparing the driver for using GENERIC_GPIO, so let's create a simple platform device and a simple platform device driver and create the gpiochip in the .probe() routine for the device driver. Keep all at the core initcall so the behaviour is the same as before. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: loongson: Use right includeLinus Walleij1-33/+33
The driver includes <linux/gpio.h> which is wrong, rely on <linux/gpio/driver.h> and remove to call to gpio_set_value() in favor of calling the internal function. Move functions around to avoid forward declarations. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpiolib: add hogs support for machine codeBartosz Golaszewski3-0/+114
Board files constitute a significant part of the users of the legacy GPIO framework. In many cases they only export a line and set its desired value. We could use GPIO hogs for that like we do for DT and ACPI but there's no support for that in machine code. This patch proposes to extend the machine.h API with support for registering hog tables in board files. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: 104-dio-48e: make array 'ports' static, shrinks object sizeColin Ian King1-1/+1
Don't populate the const read-only array 'ports' on the stack but instead make it static. Makes the object code smaller by over 100 buytes: Before: text data bss dec hex filename 10959 4952 832 16743 4167 drivers/gpio/gpio-104-dio-48e.o After: text data bss dec hex filename 10790 5008 832 16630 40f6 drivers/gpio/gpio-104-dio-48e.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16dt-bindings: gpio: rcar: Add r8a77470 (RZ/G1C) supportBiju Das1-0/+1
Renesas RZ/G1C (R8A77470) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pmic_eic: Add edge trigger emulation for PMIC EICBaolin Wang1-2/+56
This patch will toggle the EIC level to emulate the edge trigger to support PMIC EIC egdge trigger function, which is required by gpio-keys driver. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: eic: Add edge trigger emulation for EICBaolin Wang1-0/+73
The Spreadtrum debounce EIC and latch EIC can not support edge trigger, but most GPIO users (like gpio-key driver) only use the edge trigger, thus the EIC driver need add some support to emulate the edge trigger to satisfy this requirement. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: Add a reference to CEC on GPIOLinus Walleij1-0/+4
This adds a pointer to the CEC GPIO driver from the GPIO list of examples of drivers on top of GPIO. Cc: linux-media@vger.kernel.org Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-27gpio: xra1403: Switch to a fixed upper bound for registersLaura Abbott1-10/+5
Geert Uytterhoeven pointed out that the number of register was a fixed upper bound so there's no need to use a dynamically allocated array in place of a VLA. Use the defined upper bound. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-15Linux 4.17-rc1v4.17-rc1Linus Torvalds1-2/+2
2018-04-15Merge tag 'for-4.17-part2-tag' of ↵Linus Torvalds94-1234/+277
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull more btrfs updates from David Sterba: "We have queued a few more fixes (error handling, log replay, softlockup) and the rest is SPDX updates that touche almost all files so the diffstat is long" * tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Only check first key for committed tree blocks btrfs: add SPDX header to Kconfig btrfs: replace GPL boilerplate by SPDX -- sources btrfs: replace GPL boilerplate by SPDX -- headers Btrfs: fix loss of prealloc extents past i_size after fsync log replay Btrfs: clean up resources during umount after trans is aborted btrfs: Fix possible softlock on single core machines Btrfs: bail out on error during replay_dir_deletes Btrfs: fix NULL pointer dereference in log_dir_items
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 16:38:51 +0000