summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-06-07Merge tag 'tty-5.8-rc1' of ↵Linus Torvalds47-331/+619
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the tty and serial driver updates for 5.8-rc1 Nothing huge at all, just a lot of little serial driver fixes, updates for new devices and features, and other small things. Full details are in the shortlog. All of these have been in linux-next with no issues for a while" * tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits) tty: serial: qcom_geni_serial: Add 51.2MHz frequency support tty: serial: imx: clear Ageing Timer Interrupt in handler serial: 8250_fintek: Add F81966 Support sc16is7xx: Add flag to activate IrDA mode dt-bindings: sc16is7xx: Add flag to activate IrDA mode serial: 8250: Support rs485 bus termination GPIO serial: 8520_port: Fix function param documentation dt-bindings: serial: Add binding for rs485 bus termination GPIO vt: keyboard: avoid signed integer overflow in k_ascii serial: 8250: Enable 16550A variants by default on non-x86 tty: hvc_console, fix crashes on parallel open/close serial: imx: Initialize lock for non-registered console sc16is7xx: Read the LSR register for basic device presence check sc16is7xx: Allow sharing the IRQ line sc16is7xx: Use threaded IRQ sc16is7xx: Always use falling edge IRQ tty: n_gsm: Fix bogus i++ in gsm_data_kick tty: n_gsm: Remove unnecessary test in gsm_print_packet() serial: stm32: add no_console_suspend support tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP ...
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds298-2674/+7744
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-06-06Merge tag 'sh-for-5.8' of git://git.libc.org/linux-shLinus Torvalds145-11610/+121
Pull arch/sh updates from Rich Felker: "Fix for arch/sh build regression with newer binutils, removal of SH5, fixes for module exports, and misc cleanup" * tag 'sh-for-5.8' of git://git.libc.org/linux-sh: sh: remove sh5 support sh: add missing EXPORT_SYMBOL() for __delay sh: Convert ins[bwl]/outs[bwl] macros to inline functions sh: Convert iounmap() macros to inline functions sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx sh: configs: Cleanup old Kconfig IO scheduler options arch/sh: vmlinux.scr sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig sh: sh4a: Bring back tmu3_device early device
2020-06-06Merge tag 'kconfig-v5.8' of ↵Linus Torvalds11-86/+55
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - allow only 'config', 'comment', 'if' statements inside 'choice' since the other statements are not sensible inside 'choice' and should be grammatical error - support LMC_KEEP env variable for 'make local{yes,mod}config' to preserve some CONFIG options - deprecate 'make kvmconfig' and 'make xenconfig' in favor of 'make kvm_guest.config' and 'make xen.config' - code cleanups * tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands streamline_config.pl: add LMC_KEEP to preserve some kconfigs kconfig: allow only 'config', 'comment', and 'if' inside 'choice' kconfig: tests: remove randconfig test for choice in choice kconfig: do not assign a variable in the return statement kconfig: do not use OR-assignment for zero-cleared structure
2020-06-06Merge tag 'kbuild-v5.8' of ↵Linus Torvalds60-757/+883
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
2020-06-06Merge tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-3/+143
Pull dma-mapping helpers from Christoph Hellwig: "These were in a separate stable branch so that various media and drm trees could pull the in for bug fixes, but looking at linux-next that hasn't actually happened yet. Still sending the APIs to you in the hope that these bug fixes get picked up for 5.8 in one way or another. Summary: - add DMA mapping helpers for struct sg_table (Marek Szyprowski)" * tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping: iommu: add generic helper for mapping sgtable objects scatterlist: add generic wrappers for iterating over sgtable objects dma-mapping: add generic helpers for mapping sgtable objects
2020-06-06Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds11-141/+327
Pull dma-mapping updates from Christoph Hellwig: - enhance the dma pool to allow atomic allocation on x86 with AMD SEV (David Rientjes) - two small cleanups (Jason Yan and Peter Collingbourne) * tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping: dma-contiguous: fix comment for dma_release_from_contiguous dma-pool: scale the default DMA coherent pool size with memory capacity x86/mm: unencrypted non-blocking DMA allocations use coherent pools dma-pool: add pool sizes to debugfs dma-direct: atomic allocations must come from atomic coherent pools dma-pool: dynamically expanding atomic pools dma-pool: add additional coherent pools to map to gfp mask dma-remap: separate DMA atomic pools from direct remap code dma-debug: make __dma_entry_alloc_check_leak() static
2020-06-06Merge branch 'dmi-for-linus' of ↵Linus Torvalds4-0/+40
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware/dmi: Report DMI Bios & EC firmware release
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds97-2006/+3682
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-06hpfs: fix warning due to superfluous semicolonZou Wei1-1/+1
Fixes coccicheck warning: fs/hpfs/buffer.c:56:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-06Merge branch 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds2-99/+110
Pull workqueue updates from Tejun Heo: "Mostly cleanups and other trivial changes. The only interesting change is Sebastian's rcuwait conversion for RT" * 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON() workqueue: fix a piece of comment about reserved bits for work flags workqueue: remove useless unlock() and lock() in series workqueue: void unneeded requeuing the pwq in rescuer thread workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t workqueue: Use rcuwait for wq_manager_wait workqueue: Remove unnecessary kfree() call in rcu_free_wq() workqueue: Fix an use after free in init_rescuer() workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.
2020-06-06Merge branch 'for-5.8' of ↵Linus Torvalds3-21/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Just two patches: one to add system-level cpu.stat to the root cgroup for convenience and a trivial comment update" * 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: add cpu.stat file to root cgroup cgroup: Remove stale comments
2020-06-06Merge tag 'integrity-v5.8' of ↵Linus Torvalds13-87/+397
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The main changes are extending the TPM 2.0 PCR banks with bank specific file hashes, calculating the "boot_aggregate" based on other TPM PCR banks, using the default IMA hash algorithm, instead of SHA1, as the basis for the cache hash table key, and preventing the mprotect syscall to circumvent an IMA mmap appraise policy rule. - In preparation for extending TPM 2.0 PCR banks with bank specific digests, commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modified tpm_pcr_extend(). The original SHA1 file digests were padded/truncated, before being extended into the other TPM PCR banks. This pull request calculates and extends the TPM PCR banks with bank specific file hashes completing the above change. - The "boot_aggregate", the first IMA measurement list record, is the "trusted boot" link between the pre-boot environment and the running OS. With TPM 2.0, the "boot_aggregate" record is not limited to being based on the SHA1 TPM PCR bank, but can be calculated based on any enabled bank, assuming the hash algorithm is also enabled in the kernel. Other changes include the following and five other bug fixes/code clean up: - supporting both a SHA1 and a larger "boot_aggregate" digest in a custom template format containing both the the SHA1 ('d') and larger digests ('d-ng') fields. - Initial hash table key fix, but additional changes would be good" * tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Directly free *entry in ima_alloc_init_template() if digests is NULL ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init() ima: Directly assign the ima_default_policy pointer to ima_rules ima: verify mprotect change is consistent with mmap policy evm: Fix possible memory leak in evm_calc_hmac_or_hash() ima: Set again build_ima_appraise variable ima: Remove redundant policy rule set in add_rules() ima: Fix ima digest hash table key calculation ima: Use ima_hash_algo for collision detection in the measurement list ima: Calculate and extend PCR with digests in ima_template_entry ima: Allocate and initialize tfm for each PCR bank ima: Switch to dynamically allocated buffer for template digests ima: Store template digest directly in ima_template_entry ima: Evaluate error in init_ima() ima: Switch to ima_hash_algo for boot aggregate
2020-06-06kbuild: add variables for compression toolsDenis Efremov10-24/+45
Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06Makefile: install modules.builtin even if CONFIG_MODULES=nJonas Zeiger1-3/+11
Many applications check for available kernel features via: - /proc/modules (loaded modules, present if CONFIG_MODULES=y) - $(MODLIB)/modules.builtin (builtin modules) They fail to detect features if the kernel was built with CONFIG_MODULES=n and modules.builtin isn't installed. Therefore, add the target "_builtin_inst_" and make "install" and "modules_install" depend on it. Tests results: - make install: kernel image is copied as before, modules.builtin copied - make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1 Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06mksysmap: Fix the mismatch of '.L' symbols in System.mapashimida1-1/+1
When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'. For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped. Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by: ashimida <ashimida@linux.alibaba.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-2/+2
Commit d503ac531a52 ("kbuild: rename LDFLAGS to KBUILD_LDFLAGS") missed to update the documentation. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: change elf_info->size to size_tMasahiro Yamada2-6/+5
Align with the mmap / munmap APIs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove is_vmlinux() helperMasahiro Yamada1-15/+1
Now that is_vmlinux() is called only in new_module(), we can inline the function call. modname is the basename with '.o' is stripped. No need to compare it with 'vmlinux.o'. vmlinux is always located at the current working directory. No need to strip the directory path. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: strip .o from modname before calling new_module()Masahiro Yamada2-10/+12
new_module() conditionally strips the .o because the modname has .o suffix when it is called from read_symbols(), but no .o when it is called from read_dump(). It is clearer to strip .o in read_symbols(). I also used flexible-array for mod->name. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: set have_vmlinux in new_module()Masahiro Yamada1-5/+3
Set have_vmlinux flag in a single place. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->skip struct memberMasahiro Yamada2-7/+3
The meaning of 'skip' is obscure since it does not explain "what to skip". mod->skip is set when it is vmlinux or the module info came from a dump file. So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump). For the check in write_namespace_deps_files(), mod->is_vmlinux is unneeded because the -d option is not passed in the first pass of modpost. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add mod->is_vmlinux struct memberMasahiro Yamada2-9/+11
is_vmlinux() is called in several places to check whether the current module is vmlinux or not. It is faster and clearer to check mod->is_vmlinux flag. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()Masahiro Yamada1-12/+8
check_exports() is never called for vmlinux because mod->skip is set for vmlinux. Hence, check_for_gpl_usage() and check_for_unused() are not called for vmlinux, either. is_vmlinux() is always false here. Remove the is_vmlinux() calls, and hard-code the ".ko" suffix. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove mod->is_dot_o struct memberMasahiro Yamada2-13/+2
Previously, there were two cases where mod->is_dot_o is unset: [1] the executable 'vmlinux' in the second pass of modpost [2] modules loaded by read_dump() I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'. Now that modpost does not parse the executable 'vmlinux', this case does not happen. [2] is obscure, maybe a bug. Module.symver stores module paths without extension. So, none of modules loaded by read_dump() has the .o suffix, and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because handle_symbol() is not called for the case. To sum up, all the parsed ELF files are .o files. mod->is_dot_o is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: move -d option in scripts/Makefile.modpostMasahiro Yamada1-3/+1
Collect options for modules into a single place. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove -s optionMasahiro Yamada2-9/+3
The -s option was added by commit 8d8d8289df65 ("kbuild: do not do section mismatch checks on vmlinux in 2nd pass"). Now that the second pass does not parse vmlinux, this option is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: remove get_next_text() and make {grab,release_}file staticMasahiro Yamada2-39/+2
get_next_line() is no longer used. Remove. grab_file() and release_file() are only used in modpost.c. Make them static. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: use read_text_file() and get_line() for reading text filesMasahiro Yamada2-17/+14
grab_file() mmaps a file, but it is not so efficient here because get_next_line() copies every line to the temporary buffer anyway. read_text_file() and get_line() are simpler. get_line() exploits the library function strchr(). Going forward, the missing *.symvers or *.cmd is a fatal error. This should not happen because scripts/Makefile.modpost guards the -i option files with $(wildcard $(input-symdump)). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: avoid false-positive file open errorMasahiro Yamada1-4/+3
One problem of grab_file() is that it cannot distinguish the following two cases: - It cannot read the file (the file does not exist, or read permission is not set) - It can read the file, but the file size is zero This is because grab_file() calls mmap(), which requires the mapped length is greater than 0. Hence, grab_file() fails for both cases. If an empty header file were included for checksum calculation, the following warning would be printed: WARNING: modpost: could not open ...: Invalid argument An empty file is a valid source file, so it should not fail. Use read_text_file() instead. It can read a zero-length file. Then, parse_file() will succeed with doing nothing. Going forward, the first case (it cannot read the file) is a fatal error. If the source file from which an object was compiled is missing, something went wrong. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: fix potential mmap'ed file overrun in get_src_version()Masahiro Yamada1-17/+11
I do not know how reliably this function works, but it looks dangerous to me. strchr(sources, '\n'); ... continues searching until it finds '\n' or it reaches the '\0' terminator. In other words, 'sources' should be a null-terminated string. However, grab_file() just mmaps a file, so 'sources' is not terminated with null byte. If the file does not contain '\n' at all, strchr() will go beyond the mmap'ed memory. Use read_text_file(), which loads the file content into a malloc'ed buffer, appending null byte. Here we are interested only in the first line of *.mod files. Use get_line() helper to get the first line. This also makes missing *.mod file a fatal error. Commit 4be40e22233c ("kbuild: do not emit src version warning for non-modules") ignored missing *.mod files. I do not fully understand what that commit addressed, but commit 91341d4b2c19 ("kbuild: introduce new option to enhance section mismatch analysis") introduced partial section checks by using modpost. built-in.o was parsed by modpost. Even modules had a problem because *.mod files were created after the modpost check. Commit b7dca6dd1e59 ("kbuild: create *.mod with full directory path and remove MODVERDIR") stopped doing that. Now that modpost is only invoked after the directory descend, *.mod files should always exist at the modpost stage. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: add read_text_file() and get_line() helpersMasahiro Yamada2-0/+51
modpost uses grab_file() to open a file, but it is not suitable for a text file because the mmap'ed file is not terminated by null byte. Actually, I see some issues for the use of grab_file(). The new helper, read_text_file() loads the whole file content into a malloc'ed buffer, and appends a null byte. Then, get_line() reads each line. To handle text files, I intend to replace as follows: grab_file() -> read_text_file() get_new_line() -> get_line() Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: do not call get_modinfo() for vmlinux(.o)Masahiro Yamada1-21/+24
The three calls of get_modinfo() ("license", "import_ns", "version") always return NULL for vmlinux(.o) because the built-in module info is prefixed with __MODULE_INFO_PREFIX. It is harmless to call get_modinfo(), but there is no point to search for what apparently does not exist. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: drop RCS/CVS $Revision handling in MODULE_VERSION()Masahiro Yamada3-73/+0
As far as I understood, this code gets rid of '$Revision$' or '$Revision:' of CVS, RCS or whatever in MODULE_VERSION() tags. Remove the primeval code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: show warning if any of symbol dump files is missingMasahiro Yamada2-10/+5
If modpost fails to load a symbol dump file, it cannot check unresolved symbols, hence module dependency will not be added. Nor CRCs can be added. Currently, external module builds check only $(objtree)/Module.symvers, but it should check files specified by KBUILD_EXTRA_SYMBOLS as well. Move the warning message from the top Makefile to scripts/Makefile.modpost and print the warning if any dump file is missing. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: show warning if vmlinux is not found when processing modulesMasahiro Yamada1-2/+7
check_exports() does not print warnings about unresolved symbols if vmlinux is missing because there would be too many. This situation happens when you do 'make modules' from the clean tree, or compile external modules against a kernel tree that has not been completely built. It is dangerous to not check unresolved symbols because you might be building useless modules. At least it should be warned. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: invoke modpost only when input files are updatedMasahiro Yamada2-15/+37
Currently, the second pass of modpost is always invoked when you run 'make' or 'make modules' even if none of modules is changed. Use if_changed to invoke it only when it is necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: generate vmlinux.symvers and reuse it for the second modpostMasahiro Yamada5-6/+7
The full build runs modpost twice, first for vmlinux.o and second for modules. The first pass dumps all the vmlinux symbols into Module.symvers, but the second pass parses vmlinux again instead of reusing the dump file, presumably because it needs to avoid accumulating stale symbols. Loading symbol info from a dump file is faster than parsing an ELF object. Besides, modpost deals with various issues to parse vmlinux in the second pass. A solution is to make the first pass dumps symbols into a separate file, vmlinux.symvers. The second pass reads it, and parses module .o files. The merged symbol information is dumped into Module.symvers in the same way as before. This makes further modpost cleanups possible. Also, it fixes the problem of 'make vmlinux', which previously overwrote Module.symvers, throwing away module symbols. I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked when you cross this commit. Otherwise, vmlinux.symvers would not be generated. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: refactor -i option calculationMasahiro Yamada1-4/+2
Prepare to use -i for in-tree modpost as well. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: print symbol dump file as the build target in short logMasahiro Yamada1-13/+20
The symbol dump *.symvers is the output of modpost. Print it in the short log. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: re-add -e to set external_module flagMasahiro Yamada2-2/+8
Previously, the -i option had two functions; load a symbol dump file, and set the external_module flag. I want to assign a dedicate option for each of them. Going forward, the -i is used to load a symbol dump file, and the -e to set the external_module flag. With this, we will be able to use -i for loading in-kernel symbols. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: rename ext_sym_list to dump_listMasahiro Yamada1-13/+14
The -i option is used to include Modules.symver as well as files from $(KBUILD_EXTRA_SYMBOLS). Make the struct and variable names more generic. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: allow to pass -i option multiple times to remove -e optionMasahiro Yamada2-9/+2
Now that there is no difference between -i and -e, they can be unified. Make modpost accept the -i option multiple times, then remove -e. I will reuse -e for a different purpose. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06modpost: track if the symbol origin is a dump file or ELF objectMasahiro Yamada2-10/+6
The meaning of sym->kernel is obscure; it is set for in-kernel symbols loaded from Modules.symvers. This happens only when we are building external modules, and it is used to determine whether to dump symbols to $(KBUILD_EXTMOD)/Modules.symvers It is clearer to remember whether the symbol or module came from a dump file or ELF object. This changes the KBUILD_EXTRA_SYMBOLS behavior. Previously, symbols loaded from KBUILD_EXTRA_SYMBOLS are accumulated into the current $(KBUILD_EXTMOD)/Modules.symvers Going forward, they will be only used to check symbol references, but not dumped into the current $(KBUILD_EXTMOD)/Modules.symvers. I believe this makes more sense. sym->vmlinux will have no user. Remove it too. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06firmware/dmi: Report DMI Bios & EC firmware releaseErwan Velu4-0/+40
Some vendors like HPe or Dell, encode the release version of their BIOS in the "System BIOS {Major|Minor} Release" fields of Type 0. This information is used to know which bios release actually runs. It could be used for some quirks, debugging sessions or inventory tasks. A typical output for a Dell system running the 65.27 bios is : [root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release 65.27 [root@t1700 ~]# Servers that have a BMC encode the release version of their firmware in the "Embedded Controller Firmware {Major|Minor} Release" fields of Type 0. This information is used to know which BMC release actually runs. It could be used for some quirks, debugging sessions or inventory tasks. A typical output for a Dell system running the 3.75 bmc release is : [root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release 3.75 [root@t1700 ~]# Signed-off-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2020-06-05Merge tag 'for-linus-5.8-ofs1' of ↵Linus Torvalds2-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs updates from Mike Marshall: - John Hubbard's conversion from get_user_pages() to pin_user_pages() - Colin Ian King's removal of an unneeded variable initialization * tag 'for-linus-5.8-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: convert get_user_pages() --> pin_user_pages() orangefs: remove redundant assignment to variable ret
2020-06-05Merge tag 'dlm-5.8' of ↵Linus Torvalds4-20/+9
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This set includes a couple minor cleanups, and dropping the interruptible from a wait_event that waits for an event from the userspace cluster management" * tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: remove BUG() before panic() dlm: Switch to using wait_event() fs:dlm:remove unneeded semicolon in rcom.c dlm: user: Replace zero-length array with flexible-array member dlm: dlm_internal: Replace zero-length array with flexible-array member
2020-06-05Merge tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds27-729/+1041
Pull cifs updates from Steve French: "22 changesets, 2 for stable. Includes big performance improvement for large i/o when using multichannel, also includes DFS fixes" * tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits) cifs: update internal module version number cifs: multichannel: try to rebind when reconnecting a channel cifs: multichannel: use pointer for binding channel smb3: remove static checker warning cifs: multichannel: move channel selection above transport layer cifs: multichannel: always zero struct cifs_io_parms cifs: dump Security Type info in DebugData smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K smb3: default to minimum of two channels when multichannel specified cifs: multichannel: move channel selection in function cifs: fix minor typos in comments and log messages smb3: minor update to compression header definitions cifs: minor fix to two debug messages cifs: Standardize logging output smb3: Add new parm "nodelete" cifs: move some variables off the stack in smb2_ioctl_query_info cifs: reduce stack use in smb2_compound_op cifs: get rid of unused parameter in reconn_setup_dfs_targets() cifs: handle hostnames that resolve to same ip in failover cifs: set up next DFS target before generic_ip_connect() ...
2020-06-05Merge tag 'afs-next-20200604' of ↵Linus Torvalds38-3923/+4437
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS updates from David Howells: "There's some core VFS changes which affect a couple of filesystems: - Make the inode hash table RCU safe and providing some RCU-safe accessor functions. The search can then be done without taking the inode_hash_lock. Care must be taken because the object may be being deleted and no wait is made. - Allow iunique() to avoid taking the inode_hash_lock. - Allow AFS's callback processing to avoid taking the inode_hash_lock when using the inode table to find an inode to notify. - Improve Ext4's time updating. Konstantin Khlebnikov said "For now, I've plugged this issue with try-lock in ext4 lazy time update. This solution is much better." Then there's a set of changes to make a number of improvements to the AFS driver: - Improve callback (ie. third party change notification) processing by: (a) Relying more on the fact we're doing this under RCU and by using fewer locks. This makes use of the RCU-based inode searching outlined above. (b) Moving to keeping volumes in a tree indexed by volume ID rather than a flat list. (c) Making the server and volume records logically part of the cell. This means that a server record now points directly at the cell and the tree of volumes is there. This removes an N:M mapping table, simplifying things. - Improve keeping NAT or firewall channels open for the server callbacks to reach the client by actively polling the fileserver on a timed basis, instead of only doing it when we have an operation to process. - Improving detection of delayed or lost callbacks by including the parent directory in the list of file IDs to be queried when doing a bulk status fetch from lookup. We can then check to see if our copy of the directory has changed under us without us getting notified. - Determine aliasing of cells (such as a cell that is pointed to be a DNS alias). This allows us to avoid having ambiguity due to apparently different cells using the same volume and file servers. - Improve the fileserver rotation to do more probing when it detects that all of the addresses to a server are listed as non-responsive. It's possible that an address that previously stopped responding has become responsive again. Beyond that, lay some foundations for making some calls asynchronous: - Turn the fileserver cursor struct into a general operation struct and hang the parameters off of that rather than keeping them in local variables and hang results off of that rather than the call struct. - Implement some general operation handling code and simplify the callers of operations that affect a volume or a volume component (such as a file). Most of the operation is now done by core code. - Operations are supplied with a table of operations to issue different variants of RPCs and to manage the completion, where all the required data is held in the operation object, thereby allowing these to be called from a workqueue. - Put the standard "if (begin), while(select), call op, end" sequence into a canned function that just emulates the current behaviour for now. There are also some fixes interspersed: - Don't let the EACCES from ICMP6 mapping reach the user as such, since it's confusing as to whether it's a filesystem error. Convert it to EHOSTUNREACH. - Don't use the epoch value acquired through probing a server. If we have two servers with the same UUID but in different cells, it's hard to draw conclusions from them having different epoch values. - Don't interpret the argument to the CB.ProbeUuid RPC as a fileserver UUID and look up a fileserver from it. - Deal with servers in different cells having the same UUIDs. In the event that a CB.InitCallBackState3 RPC is received, we have to break the callback promises for every server record matching that UUID. - Don't let afs_statfs return values that go below 0. - Don't use running fileserver probe state to make server selection and address selection decisions on. Only make decisions on final state as the running state is cleared at the start of probing" Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part) * tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits) afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly afs: Show more a bit more server state in /proc/net/afs/servers afs: Don't use probe running state to make decisions outside probe code afs: Fix afs_statfs() to not let the values go below zero afs: Fix the by-UUID server tree to allow servers with the same UUID afs: Reorganise volume and server trees to be rooted on the cell afs: Add a tracepoint to track the lifetime of the afs_volume struct afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op afs: Detect cell aliases 2 - Cells with no root volumes afs: Detect cell aliases 1 - Cells with root volumes afs: Implement client support for the YFSVL.GetCellName RPC op afs: Retain more of the VLDB record for alias detection afs: Fix handling of CB.ProbeUuid cache manager op afs: Don't get epoch from a server because it may be ambiguous afs: Build an abstraction around an "operation" concept afs: Rename struct afs_fs_cursor to afs_operation afs: Remove the error argument from afs_protocol_error() afs: Set error flag rather than return error from file status decode afs: Make callback processing more efficient. afs: Show more information in /proc/net/afs/servers ...
2020-06-05Merge tag 'ext4_for_linus' of ↵Linus Torvalds47-663/+905
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A lot of bug fixes and cleanups for ext4, including: - Fix performance problems found in dioread_nolock now that it is the default, caused by transaction leaks. - Clean up fiemap handling in ext4 - Clean up and refactor multiple block allocator (mballoc) code - Fix a problem with mballoc with a smaller file systems running out of blocks because they couldn't properly use blocks that had been reserved by inode preallocation. - Fixed a race in ext4_sync_parent() versus rename() - Simplify the error handling in the extent manipulation code - Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers. - Avoid passing an error pointer to brelse in ext4_xattr_set() - Fix race which could result to freeing an inode on the dirty last in data=journal mode. - Fix refcount handling if ext4_iget() fails - Fix a crash in generic/019 caused by a corrupted extent node" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits) ext4: avoid unnecessary transaction starts during writeback ext4: don't block for O_DIRECT if IOCB_NOWAIT is set ext4: remove the access_ok() check in ext4_ioctl_get_es_cache fs: remove the access_ok() check in ioctl_fiemap fs: handle FIEMAP_FLAG_SYNC in fiemap_prep fs: move fiemap range validation into the file systems instances iomap: fix the iomap_fiemap prototype fs: move the fiemap definitions out of fs.h fs: mark __generic_block_fiemap static ext4: remove the call to fiemap_check_flags in ext4_fiemap ext4: split _ext4_fiemap ext4: fix fiemap size checks for bitmap files ext4: fix EXT4_MAX_LOGICAL_BLOCK macro add comment for ext4_dir_entry_2 file_type member jbd2: avoid leaking transaction credits when unreserving handle ext4: drop ext4_journal_free_reserved() ext4: mballoc: use lock for checking free blocks while retrying ext4: mballoc: refactor ext4_mb_good_group() ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling ext4: mballoc: refactor ext4_mb_discard_preallocations() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:09:08 +0000