summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-09-22mac80211: reset CQM history upon reconfigurationSara Sharon1-0/+1
The current behavior of notifying CQM events is inconsistent: Upon first configuration there is a cqm event with the current status according to threshold configured, regardless of signal stability. When there is reconfiguration no event is sent unless there is a significant change to the signal level according to the new configuration. Since the current reconfiguration behavior might cause missing CQM events in case the current signal did not change but is on the other side of the new threshold, fix that by resetting the stored signal level upon reconfiguration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: fix VHT MCS mask array overrunJohannes Berg1-5/+7
The HT MCS mask has 9 bytes, the VHT one only has 8 streams. Split the loops to handle this correctly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04mac80211: reject software RSSI CQM with beacon filteringJohannes Berg1-0/+4
When beacon filtering is enabled the mac80211 software implementation for RSSI CQM cannot work as beacons will not be available. Rather than accepting such a configuration without proper effect, reject it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04mac80211: avoid VHT usage with no 80MHz chans allowedArik Nemtsov2-0/+31
Currently if 80MHz channels are not allowed for use, the VHT IE is not included in the probe request for an AP. This is not good enough if the AP is configured with the wrong regulatory and supports VHT even where prohibited or in TDLS scenarios. Mark the ifmgd with the DISABLE_VHT flag for the misbehaving-AP case, and unset VHT support from the peer-station entry for the TDLS case. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04cfg80211: regulatory: restore proper user alpha2Maciej S. Szmigiero1-1/+1
restore_regulatory_settings() should restore alpha2 as computed in restore_alpha2(), not raw user_alpha2 to behave as described in the comment just above that code. This fixes endless loop of calling CRDA for "00" and "97" countries after resume from suspend on my laptop. Looks like others had the same problem, too: http://ath9k-devel.ath9k.narkive.com/knY5W6St/ath9k-and-crda-messages-in-logs https://bugs.launchpad.net/ubuntu/+source/linux/+bug/899335 https://forum.porteus.org/viewtopic.php?t=4975&p=36436 https://forums.opensuse.org/showthread.php/483356-Authentication-Regulatory-Domain-issues-ath5k-12-2 Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04rfkill: Copy "all" global state to other typesJoão Paulo Rechi Vita1-1/+9
When switching the state of all RFKill switches of type all we need to replicate the RFKILL_TYPE_ALL global state to all the other types global state, so it is used to initialize persistent RFKill switches on register. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04mac80211: protect non-HT BSS when HT TDLS traffic existsAvri Altman2-4/+70
HT TDLS traffic should be protected in a non-HT BSS to avoid collisions. Therefore, when TDLS peers join/leave, check if protection is (now) needed and set the ht_operation_mode of the virtual interface according to the HT capabilities of the TDLS peer(s). This works because a non-HT BSS connection never sets (or otherwise uses) the ht_operation_mode; it just means that drivers must be aware that this field applies to all HT traffic for this virtual interface, not just the traffic within the BSS. Document that. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04mac80211: Do not use sizeof() on pointer typeThierry Reding1-1/+1
The rate_control_cap_mask() function takes a parameter mcs_mask, which GCC will take to be u8 * even though it was declared with a fixed size. This causes the following warning: net/mac80211/rate.c: In function 'rate_control_cap_mask': net/mac80211/rate.c:719:25: warning: 'sizeof' on array function parameter 'mcs_mask' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument] for (i = 0; i < sizeof(mcs_mask); i++) ^ net/mac80211/rate.c:684:10: note: declared here u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN], ^ This can be easily fixed by using the IEEE80211_HT_MCS_MASK_LEN directly within the loop condition. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1229-21896/+78533
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-09-02Merge tag 'dm-4.3-changes' of ↵Linus Torvalds21-238/+190
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper update from Mike Snitzer: - a couple small cleanups in dm-cache, dm-verity, persistent-data's dm-btree, and DM core. - a 4.1-stable fix for dm-cache that fixes the leaking of deferred bio prison cells - a 4.2-stable fix that adds feature reporting for the dm-stats features added in 4.2 - improve DM-snapshot to not invalidate the on-disk snapshot if snapshot device write overflow occurs; but a write overflow triggered through the origin device will still invalidate the snapshot. - optimize DM-thinp's async discard submission a bit now that late bio splitting has been included in block core. - switch DM-cache's SMQ policy lock from using a mutex to a spinlock; improves performance on very low latency devices (eg. NVMe SSD). - document DM RAID 4/5/6's discard support [ I did not pull the slab changes, which weren't appropriate for this tree, and weren't obviously the right thing to do anyway. At the very least they need some discussion and explanation before getting merged. Because not pulling the actual tagged commit but doing a partial pull instead, this merge commit thus also obviously is missing the git signature from the original tag ] * tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix use after freeing migrations dm cache: small cleanups related to deferred prison cell cleanup dm cache: fix leaking of deferred bio prison cells dm raid: document RAID 4/5/6 discard support dm stats: report precise_timestamps and histogram in @stats_list output dm thin: optimize async discard submission dm snapshot: don't invalidate on-disk image on snapshot write overflow dm: remove unlikely() before IS_ERR() dm: do not override error code returned from dm_get_device() dm: test return value for DM_MAPIO_SUBMITTED dm verity: remove unused mempool dm cache: move wake_waker() from free_migrations() to where it is needed dm btree remove: remove unused function get_nr_entries() dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling() dm cache policy smq: change the mutex to a spinlock
2015-09-02netfilter: nf_conntrack: make nf_ct_zone_dflt built-inDaniel Borkmann5-25/+32
Fengguang reported, that some randconfig generated the following linker issue with nf_ct_zone_dflt object involved: [...] CC init/version.o LD init/built-in.o net/built-in.o: In function `ipv4_conntrack_defrag': nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt' net/built-in.o: In function `ipv6_defrag': nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt' make: *** [vmlinux] Error 1 Given that configurations exist where we have a built-in part, which is accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user() and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in area when netfilter is configured in general. Therefore, split the more generic parts into a common header under include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in section that already holds parts related to CONFIG_NF_CONNTRACK in the netfilter core. This fixes the issue on my side. Fixes: 308ac9143ee2 ("netfilter: nf_conntrack: push zone object into functions") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabledDaniel Borkmann2-0/+2
While testing various Kconfig options on another issue, I found that the following one triggers as well on allmodconfig and nf_conntrack disabled: net/ipv4/netfilter/nf_dup_ipv4.c: In function ‘nf_dup_ipv4’: net/ipv4/netfilter/nf_dup_ipv4.c:72:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) [...] net/ipv6/netfilter/nf_dup_ipv6.c: In function ‘nf_dup_ipv6’: net/ipv6/netfilter/nf_dup_ipv6.c:66:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) Fix it by including directly the header where it is defined. Fixes: bbde9fc1824a ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02net: fec: clear receive interrupts before processing a packetRussell King1-0/+1
The patch just to re-submit the patch "db3421c114cfa6326" because the patch "4d494cdc92b3b9a0" remove the change. Clear any pending receive interrupt before we process a pending packet. This helps to avoid any spurious interrupts being raised after we have fully cleaned the receive ring, while still allowing an interrupt to be raised if we receive another packet. The position of this is critical: we must do this prior to reading the next packet status to avoid potentially dropping an interrupt when a packet is still pending. Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02ipv6: fix exthdrs offload registration in out_rt pathDaniel Borkmann1-1/+1
We previously register IPPROTO_ROUTING offload under inet6_add_offload(), but in error path, we try to unregister it with inet_del_offload(). This doesn't seem correct, it should actually be inet6_del_offload(), also ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it also uses rthdr_offload twice), but it got removed entirely later on. Fixes: 3336288a9fea ("ipv6: Switch to using new offload infrastructure.") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-blockLinus Torvalds21-81/+234
Pull SG updates from Jens Axboe: "This contains a set of scatter-gather related changes/fixes for 4.3: - Add support for limited chaining of sg tables even for architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph. - Add sg chain support to target_rd. From Christoph. - Fixup open coded sg->page_link in crypto/omap-sham. From Christoph. - Fixup open coded crypto ->page_link manipulation. From Dan. - Also from Dan, automated fixup of manual sg_unmark_end() manipulations. - Also from Dan, automated fixup of open coded sg_phys() implementations. - From Robert Jarzmik, addition of an sg table splitting helper that drivers can use" * 'for-4.3/sg' of git://git.kernel.dk/linux-block: lib: scatterlist: add sg splitting function scatterlist: use sg_phys() crypto/omap-sham: remove an open coded access to ->page_link scatterlist: remove open coded sg_unmark_end instances crypto: replace scatterwalk_sg_chain with sg_chain target/rd: always chain S/G list scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
2015-09-02Merge branch 'for-4.3/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds4-146/+506
Pull block driver updates from Jens Axboe: "On top of the 4.3 core block IO changes, here are the driver related changes for 4.3. Basically just NVMe and nbd this time around: - NVMe: - PRACT PI improvement from Alok Pandey. - Cleanups and improvements on submission queue doorbell and writing, using CMB if available. From Jon Derrick. - From Keith, support for setting queue maximum segments, and reset support. - Also from Jon, fixup of u64 division issue on 32-bit archs and wiring up of the reset support through and ioctl. - Two small cleanups from Matias and Sunad - Various code cleanups and fixes from Markus Pargmann" * 'for-4.3/drivers' of git://git.kernel.dk/linux-block: NVMe: Using PRACT bit to generate and verify PI by controller NVMe:Remove unreachable code in nvme_abort_req NVMe: Add nvme subsystem reset IOCTL NVMe: Add nvme subsystem reset support NVMe: removed unused nn var from nvme_dev_add NVMe: Set queue max segments nbd: flags is a u32 variable nbd: Rename functions for clearness of recv/send path nbd: Change 'disconnect' to be boolean nbd: Add debugfs entries nbd: Remove variable 'pid' nbd: Move clear queue debug message nbd: Remove 'harderror' and propagate error properly nbd: restructure sock_shutdown nbd: sock_shutdown, remove conditional lock nbd: Fix timeout detection nvme: Fixes u64 division which breaks i386 builds NVMe: Use CMB for the IO SQes if available NVMe: Unify SQ entry writing and doorbell ringing
2015-09-02Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-blockLinus Torvalds132-2130/+1199
Pull core block updates from Jens Axboe: "This first core part of the block IO changes contains: - Cleanup of the bio IO error signaling from Christoph. We used to rely on the uptodate bit and passing around of an error, now we store the error in the bio itself. - Improvement of the above from myself, by shrinking the bio size down again to fit in two cachelines on x86-64. - Revert of the max_hw_sectors cap removal from a revision again, from Jeff Moyer. This caused performance regressions in various tests. Reinstate the limit, bump it to a more reasonable size instead. - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me. Most devices have huge trim limits, which can cause nasty latencies when deleting files. Enable the admin to configure the size down. We will look into having a more sane default instead of UINT_MAX sectors. - Improvement of the SGP gaps logic from Keith Busch. - Enable the block core to handle arbitrarily sized bios, which enables a nice simplification of bio_add_page() (which is an IO hot path). From Kent. - Improvements to the partition io stats accounting, making it faster. From Ming Lei. - Also from Ming Lei, a basic fixup for overflow of the sysfs pending file in blk-mq, as well as a fix for a blk-mq timeout race condition. - Ming Lin has been carrying Kents above mentioned patches forward for a while, and testing them. Ming also did a few fixes around that. - Sasha Levin found and fixed a use-after-free problem introduced by the bio->bi_error changes from Christoph. - Small blk cgroup cleanup from Viresh Kumar" * 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits) blk: Fix bio_io_vec index when checking bvec gaps block: Replace SG_GAPS with new queue limits mask block: bump BLK_DEF_MAX_SECTORS to 2560 Revert "block: remove artifical max_hw_sectors cap" blk-mq: fix race between timeout and freeing request blk-mq: fix buffer overflow when reading sysfs file of 'pending' Documentation: update notes in biovecs about arbitrarily sized bios block: remove bio_get_nr_vecs() fs: use helper bio_add_page() instead of open coding on bi_io_vec block: kill merge_bvec_fn() completely md/raid5: get rid of bio_fits_rdev() md/raid5: split bio for chunk_aligned_read block: remove split code in blkdev_issue_{discard,write_same} btrfs: remove bio splitting and merge_bvec_fn() calls bcache: remove driver private bio splitting code block: simplify bio_add_page() block: make generic_make_request handle arbitrarily sized bios blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL) block: don't access bio->bi_error after bio_put() block: shrink struct bio down to 2 cache lines again ...
2015-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds70-1327/+9177
Pull first round of SCSI updates from James Bottomley: "This includes one new driver: cxlflash plus the usual grab bag of updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop, plus a few assorted fixes. There's another tranch coming, but I want to incubate it another few days in the checkers, plus it includes a mpt2sas separated lifetime fix, which Avago won't get done testing until Friday" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits) aic94xx: set an error code on failure storvsc: Set the error code correctly in failure conditions storvsc: Allow write_same when host is windows 10 storvsc: use storage protocol version to determine storage capabilities storvsc: use correct defaults for values determined by protocol negotiation storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation. storvsc: Use a single value to track protocol versions storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges. cxlflash: Remove unused variable from queuecommand cxlflash: shift wrapping bug in afu_link_reset() cxlflash: off by one bug in cxlflash_show_port_status() cxlflash: Virtual LUN support cxlflash: Superpipe support cxlflash: Base error recovery support qla2xxx: Update driver version to 8.07.00.26-k qla2xxx: Add pci device id 0x2261. qla2xxx: Fix missing device login retries. qla2xxx: do not clear slot in outstanding cmd array qla2xxx: Remove decrement of sp reference count in abort handler. qla2xxx: Add support to show MPI and PEP FW version for ISP27xx. ...
2015-09-02Merge tag 'for-linus-20150901' of git://git.infradead.org/linux-mtdLinus Torvalds23-233/+1010
Pull MTD updates from Brian Norris: "SPI NOR: - reduce virtual address space requirements for fsl-quadspi memory map - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi - add new NOR flash device support - add new driver for NXP SPI Flash Interface (SPIFI) - stop abusing SPI API structs for non-SPI framework - fixup DT table matching for new "jedec,spi-nor" string NAND: - brcmnand: fix big endian MIPS macro usage - denali: refactor to use devres, dev_*() printing, etc. - OMAP ELM: change the module alias to actually be usable - pxa3xx_nand: fixup a few command sequencing issues -- both new and old - race conditions in the IRQ handler status clearing - problems when a bootloader left interrupts pending - config issues when overriding the bootloader configuration - new flash device support - sunxi_nand: - optimize timing configuration by calculation, rather than fixed fail-safe values - use EDO setting from ONFI - r852: fix compiler warnings - davinci: add 4KB page support Core: - oobtest: correct debug print information" * tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits) mtd: mtd_oobtest: Fix the address offset with vary_offset case mtd: blkdevs: fix switch-bool compilation warning mtd: spi-nor: stop (ab)using struct spi_device_id mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table mtd: dataflash: Export OF module alias information nand: pxa3xx: Increase READ_ID buffer and make the size static mtd: nand: pxa3xx-nand: fix random command timeouts mtd: nand: pxa3xx_nand: fix early spurious interrupt mtd: pxa3xx_nand: add a default chunk size mtd: omap_elm: Fix module alias mtd: physmap_of: fix null pointer deference when kzalloc returns null mtd: nettel: do not ignore mtd_device_register() failure in nettel_init() mtd: denali_pci: switch to dev_err() mtd: denali_pci: refactor driver using devres API mtd: denali_pci: use module_pci_driver() macro mtd: denali: hide core part from user in Kconfig mtd: spi-nor: add Spansion S25FL204K support mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI) doc: dt: add documentation for nxp,lpc1773-spifi ...
2015-09-02xen-netback: add support for multicast controlPaul Durrant5-1/+144
Xen's PV network protocol includes messages to add/remove ethernet multicast addresses to/from a filter list in the backend. This allows the frontend to request the backend only forward multicast packets which are of interest thus preventing unnecessary noise on the shared ring. The canonical netif header in git://xenbits.xen.org/xen.git specifies the message format (two more XEN_NETIF_EXTRA_TYPEs) so the minimal necessary changes have been pulled into include/xen/interface/io/netif.h. To prevent the frontend from extending the multicast filter list arbitrarily a limit (XEN_NETBK_MCAST_MAX) has been set to 64 entries. This limit is not specified by the protocol and so may change in future. If the limit is reached then the next XEN_NETIF_EXTRA_TYPE_MCAST_ADD sent by the frontend will be failed with NETIF_RSP_ERROR. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02bgmac: Update fixed_phy_register()Fabio Estevam1-1/+1
Commit a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.") added a new argument to fixed_phy_register(), but missed to update bgmac driver, causing the following build failure: drivers/net/ethernet/broadcom/bgmac.c:1450:2: error: too few arguments to function 'fixed_phy_register' Add the missing argument. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02sock, diag: fix panic in sock_diag_put_filterinfoDaniel Borkmann1-0/+3
diag socket's sock_diag_put_filterinfo() dumps classic BPF programs upon request to user space (ss -0 -b). However, native eBPF programs attached to sockets (SO_ATTACH_BPF) cannot be dumped with this method: Their orig_prog is always NULL. However, sock_diag_put_filterinfo() unconditionally tries to access its filter length resp. wants to copy the filter insns from there. Internal cBPF to eBPF transformations attached to sockets don't have this issue, as orig_prog state is kept. It's currently only used by packet sockets. If we would want to add native eBPF support in the future, this needs to be done through a different attribute than PACKET_DIAG_FILTER to not confuse possible user space disassemblers that work on diag data. Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02Merge branch 'for-4.3' of ↵Linus Torvalds14-37/+717
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - a new PIDs controller is added. It turns out that PIDs are actually an independent resource from kmem due to the limited PID space. - more core preparations for the v2 interface. Once cpu side interface is settled, it should be ready for lifting the devel mask. for-4.3-unified-base was temporarily branched so that other trees (block) can pull cgroup core changes that blkcg changes depend on. - a non-critical idr_preload usage bug fix. * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: pids: fix invalid get/put usage cgroup: introduce cgroup_subsys->legacy_name cgroup: don't print subsystems for the default hierarchy cgroup: make cftype->private a unsigned long cgroup: export cgrp_dfl_root cgroup: define controller file conventions cgroup: fix idr_preload usage cgroup: add documentation for the PIDs controller cgroup: implement the PIDs subsystem cgroup: allow a cgroup subsystem to reject a fork
2015-09-02Merge branch 'for-4.3' of ↵Linus Torvalds2-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu updates from Tejun Heo: "Minor cleanups" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: clean up of schunk->map[] assignment in pcpu_setup_first_chunk percpu: update incorrect comment for this_cpu_*() operations
2015-09-02Merge branch 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds3-4/+5
Pull workqueue updates from Tejun Heo: "Only three trivial changes for workqueue this time - doc, MAINTAINERS and EXPORT_SYMBOL updates" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix some docbook warnings workqueue: Make flush_workqueue() available again to non GPL modules workqueue: add myself as a dedicated reviwer
2015-09-02Merge branch 'for-4.3' of ↵Linus Torvalds3-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing interesting. A couple device specific minor updates and a kernel doc change" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: pata_arasam_cf: Use devm_clk_get libata: fix libata-core.c kernel-doc warning ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
2015-09-01flow_dissector: Use 'const' where possible.David S. Miller3-46/+49
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Fix function argument ordering dependencyTom Herbert1-4/+4
Commit c6cc1ca7f4d70c ("flowi: Abstract out functions to get flow hash based on flowi") introduced a bug in __skb_set_sw_hash where we require a dependency on evaluating arguments in a function in order. There is no such ordering enforced in C, so this incorrect. This patch fixes that by splitting out the arguments. This bug was found via a compiler warning that keys may be uninitialized. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01Merge branch 'master' of ↵David S. Miller12-139/+633
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-09-01 This series contains updates to i40e, ixgbe and ixgbevf. Anjali fixes a bug in i40e where the port is not receiving multicast or VLAN tagged packets in promiscuous mode. Which can occur when a software bridge is created on top of the device. Don adds support in ixgbe that indicates the presence of management firmware. Added support for entering low power link up state on devices that support it when the device is closing or suspending. Updated the driver to report unknown bus speed and width since IOSF does not report a PCIe bus speed or width for X550 devices. Also added the new bus type for integrated I/O interface (IOSF). Cleaned up of redundant code in ixgbe. Mark adds support for UDP-encapsulation transmit checksum and for VXLAN receive offloads. Introduces a helper function to do the register access and processing to avoid needless PHY access on copper PHYs. Added support for reporting 2.5G link speed. Fixed warnings resulting from redundant initializations of the get_bus_info field. Maninder Singh updates the ixgbe driver to use kzalloc instead of kcalloc for allocation of one thing. Tom Barbette adds support for ethtool to change the rxfh indirection table and/or key using ethtool interface. Emil resolves an issue where users were not able to dynamically set number of queues for 82598 via ethtool -L. Alex Williamson removes bimodal SR-IOV disabling behavior since it is confusing to users and results in a state where the PF is broken for other uses unless the user sets sriov_numvfs to zero prior to unbinding the device. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01Merge tag 'pm+acpi-4.3-rc1' of ↵Linus Torvalds212-3335/+8402
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "From the number of commits perspective, the biggest items are ACPICA and cpufreq changes with the latter taking the lead (over 50 commits). On the cpufreq front, there are many cleanups and minor fixes in the core and governors, driver updates etc. We also have a new cpufreq driver for Mediatek MT8173 chips. ACPICA mostly updates its debug infrastructure and adds a number of fixes and cleanups for a good measure. The Operating Performance Points (OPP) framework is updated with new DT bindings and support for them among other things. We have a few updates of the generic power domains framework and a reorganization of the ACPI device enumeration code and bus type operations. And a lot of fixes and cleanups all over. Included is one branch from the MFD tree as it contains some PM-related driver core and ACPI PM changes a few other commits are based on. Specifics: - ACPICA update to upstream revision 20150818 including method tracing extensions to allow more in-depth AML debugging in the kernel and a number of assorted fixes and cleanups (Bob Moore, Lv Zheng, Markus Elfring). - ACPI sysfs code updates and a documentation update related to AML method tracing (Lv Zheng). - ACPI EC driver fix related to serialized evaluations of _Qxx methods and ACPI tools updates allowing the EC userspace tool to be built from the kernel source (Lv Zheng). - ACPI processor driver updates preparing it for future introduction of CPPC support and ACPI PCC mailbox driver updates (Ashwin Chaugule). - ACPI interrupts enumeration fix for a regression related to the handling of IRQ attribute conflicts between MADT and the ACPI namespace (Jiang Liu). - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar). - ACPI device registration code reorganization to separate the sysfs-related code and bus type operations from the rest (Rafael J Wysocki). - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause, Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss). - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan Xinhui, Rafael J Wysocki). - cpufreq core cleanups on top of the previous changes allowing it to preseve its sysfs directories over system suspend/resume (Viresh Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior). - cpufreq fixes and cleanups related to governors (Viresh Kumar). - cpufreq updates (core and the cpufreq-dt driver) related to the turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz). - New DT bindings for Operating Performance Points (OPP), support for them in the OPP framework and in the cpufreq-dt driver plus related OPP framework fixes and cleanups (Viresh Kumar). - cpufreq powernv driver updates (Shilpasri G Bhat). - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen). - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean). - intel_pstate driver updates including Skylake-S support, support for enabling HW P-states per CPU and an additional vendor bypass list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao). - cpuidle core fixes related to the handling of coupled idle states (Xunlei Pang). - intel_idle driver updates including Skylake Client support and support for freeze-mode-specific idle states (Len Brown). - Driver core updates related to power management (Andy Shevchenko, Rafael J Wysocki). - Generic power domains framework fixes and cleanups (Jon Hunter, Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson). - Device PM QoS framework update to allow the latency tolerance setting to be exposed to user space via sysfs (Mika Westerberg). - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas). - System sleep support updates (Alan Stern, Len Brown, SungEun Kim). - rockchip-io AVS support updates (Heiko Stuebner). - PM core clocks support fixup (Colin Ian King). - Power capping RAPL driver update including support for Skylake H/S and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi). - Generic device properties framework fixes related to the handling of static (driver-provided) property sets (Andy Shevchenko). - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat, Shreyas B Prabhu)" * tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output powercap / RAPL: disable the 2nd power limit properly tools: cpupower: Fix error when running cpupower monitor PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) ...
2015-09-01Merge tag 'devicetree-for-4.3' of ↵Linus Torvalds9-11/+170
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - added Frank Rowand as DT maintainer in preparation for Grant's retirement. - generic MSI binding documentation and a few other minor doc updates - fix long standing issue with DT platorm device unregistration - fix loop forever bug in of_find_matching_node_by_address() * tag 'devicetree-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: Add Frank Rowand as DT maintainer mtd: nand: pxa3xx: add optional dma for pxa architecture Documentation: DT: cpsw: document missing compatible Docs: dt: add generic MSI bindings drivercore: Fix unregistration path of platform devices of/address: Don't loop forever in of_find_matching_node_by_address(). of: Add vendor prefix for JEDEC Solid State Technology Association of/platform: add function to populate default bus of: Add vendor prefix for Sharp Corporation
2015-09-01Merge branch 'for-next' of ↵Linus Torvalds48-70/+70
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk() fixes, Documentation and MAINTAINERS updates)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) MAINTAINERS: update my e-mail address mod_devicetable: add space before */ scsi: a100u2w: trivial typo in printk i2c: Fix typo in i2c-bfin-twi.c treewide: fix typos in comment blocks Doc: fix trivial typo in SubmittingPatches proportions: Spelling s/consitent/consistent/ dm: Spelling s/consitent/consistent/ aic7xxx: Fix typo in error message pcmcia: Fix typo in locking documentation scsi/arcmsr: Fix typos in error log drm/nouveau/gr: Fix typo in nv10.c [SCSI] Fix printk typos in drivers/scsi staging: comedi: Grammar s/Enable support a/Enable support for a/ Btrfs: Spelling s/consitent/consistent/ README: GTK+ is a acronym ASoC: omap: Fix typo in config option description mm: tlb.c: Fix error message ntfs: super.c: Fix error log fix typo in Documentation/SubmittingPatches ...
2015-09-01Merge branch 'for-linus' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: "Livepatching error handling fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Improve error handling in klp_disable_func()
2015-09-01Merge branch 'for-linus' of ↵Linus Torvalds26-308/+1144
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "to receive patches queued for 4.3 merge window in HID tree. Highlights: - a lot of improvements (regarding supported features and devices) to Wacom driver, from Aaron Skomra and Jason Gerecke - a lot of functional fixes and support for large I2C transfer to cp2112 driver, from Ellen Wang - HW support improvements to RMI driver, from Andrew Duggan - quite some small fixes and device ID additions all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (44 commits) HID: wacom: wacom_setup_numbered_buttons is local to wacom_wac HID: wacom: Add support for Express Key Remote. HID: wacom: Set button bits based on a new numbered_buttons HID: quirks: add QUIRK_NOGET for an other TPV touchscreen HID: usbhid: Fix the check for HID_RESET_PENDING in hid_io_error HID: i2c-hid: Only disable irq wake if it was successfully enabled during suspend HID: wacom: Use tablet-provided touch height/width values for INTUOSHT HID: gembird: add new driver to fix Gembird JPD-DualForce 2 HID: lenovo: Hide middle-button press until release HID: lenovo: Add missing return-value check HID: lenovo: Use constants for axes names HID: wacom: Simplify 'wacom_pl_irq' HID: wacom: Do not repeatedly attempt to set device mode on error HID: wacom: Do not repeatedly attempt to set device mode on error HID: wacom: Remove WACOM_QUIRK_NO_INPUT HID: wacom: Replace WACOM_QUIRK_MONITOR with WACOM_DEVICETYPE_WL_MONITOR HID: wacom: Use calculated pkglen for wireless touch interface HID: sony: Fix DS4 controller reporting rate issues HID: chicony: Add support for Acer Aspire Switch 12 HID: hid-lg: Add USBID for Logitech G29 Wheel ...
2015-09-01Merge tag 'edac_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2-2/+2
Pull EDAC fixes from Borislav Petkov: "Two minor fixlets this time: AMD MCE decoding correction and xgene_edac cleanup" * tag 'edac_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, mce_amd: Don't emit 'CE' for Deferred error EDAC, xgene: Drop owner assignment from platform_driver
2015-09-01ixgbe: Resolve "initialized field overwritten" warningsMark Rustad1-1/+0
Resolve warnings resulting from redundant initialization of the get_bus_info field in the mac_ops_X550* structures. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Remove bimodal SR-IOV disablingAlex Williamson1-6/+1
When unbinding an SR-IOV device with VFs configured from ixgbe, the driver behaves in one of two ways. If max_vfs was specified, the SR-IOV state is disabled, removing the VFs. The occurs regardless of whether the VF count was later modified through sysfs. If however max_vfs is zero, such as by not specifying the module parameter, the VFs persist after the PF is unbound from ixgbe. If the PF is then bound to vfio-pci to be assigned to a VM, the PF is non-functional. >From the comment, commit da36b64736cf ("ixgbe: Implement PCI SR-IOV sysfs callback operation") clearly intended this alternate behavior, but probably didn't realize the PF doesn't work in this mode. This bimodal behavior is confusing to users and results in a state where the PF is broken for other uses unless the user sets sriov_numvfs to zero prior to unbinding the device. Remove this behavior so that VFs are removed and the PF is functional for other uses after unbind, regardless of the way VFs are enabled. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for reporting 2.5G link speedMark Rustad2-8/+26
Now that we can do 2.5G link speed, we need to be able to report it. Also change the nested triadic involved in creating the log message to instead use a simpler switch statement to set a string pointer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: fix bounds checking in ixgbe_setup_tc for 82598Emil Tantilov1-3/+4
This patch resolves an issue where users were not able to dynamically set number of queues for 82598 via ethtool -L Reported-by: Tal Abudi <talabudi@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: support for ethtool set_rxfhTom Barbette3-1/+49
Allows to change the rxfh indirection table and/or key using ethtool interface. Signed-off-by: Tom Barbette <tom.barbette@ulg.ac.be> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Avoid needless PHY access on copper physMark Rustad2-21/+44
Avoid a needless PHY access on copper phys to save the 10ms wait time for each PHY access. A helper function is introduced to actually do the register access and process the contents. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: cleanup to use cached mask valueDon Skidmore1-6/+1
We already cache this FW/SW semaphore mask so might as well use it for consistency. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Remove second instance of lan_id variableDon Skidmore2-4/+1
This patch removes the redundant lan_id in the phy struct and uses the bus version. Both variables exist and intend to represent the STATUS register LAN_ID field. However, phy.lan_id is not bit shifted so the phy.lan_id = 0x0 for LAN Id 0 and phy.lan_id = 0x4 for LAN Id 1. Where bus.lan_id is bit shifted so bus.lan_id = 0x0 for LAN Id 0 and bus.lan_id = 0x1 for LAN Id 1. There seems no need for the additional lan_id variable and this should make the code less confusing. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: use kzalloc for allocating one thingManinder Singh1-1/+1
Use kzalloc rather than kcalloc(1.. The semantic patch that makes this change is as follows: // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> and removing checkpatch below CHECK: CHECK: Prefer kzalloc(sizeof(*fwd_adapter)...) over kzalloc(sizeof(struct ixgbe_fwd_adapter)...) Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01flow: Move __get_hash_from_flowi{4,6} into flow_dissector.cDavid S. Miller2-36/+35
These cannot live in net/core/flow.c which only builds when XFRM is enabled. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ixgbe: Remove unused PCI bus typesDon Skidmore1-2/+0
The ixgbe never has as very doubtfully ever will support either PCI or PCI-X devices. So remove the unused types from the ixgbe_bus_type. Thanks to Alex Duyck for suggesting this. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add new bus type for intergrated I/O interface (IOSF)Don Skidmore3-1/+12
With this patch we add support for a new bus type ixgbe_bus_type_internal. X550em devices use IOSF and not PCIe bus so this new type is to accommodate them. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add get_bus_info method for X550Don Skidmore1-0/+19
Added ixgbe_get_bus_info_X550em to X550 code. ixgbe_get_bus_info_X550em sets bus.width to ixgbe_bus_width_unknown and bus.speed to ixgbe_bus_speed_unknown, because IOSF does not report a PCIe bus width or speed. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for entering low power link up stateDon Skidmore3-2/+185
When the device is closing or suspending, call ixgbe_enter_lplu to enter low power link up state on devices that support it. When this is done, prevent the phy from being reset in the ixgbe_down path so that link is present when calling ixgbe_enter_lplu. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for VXLAN RX offloadsMark Rustad4-31/+127
Add support for VXLAN RX offloads for the X55x devices that support them. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>