summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-06-12[S390] ftrace: add function graph tracer supportHeiko Carstens9-12/+166
Function graph tracer support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] ftrace: add function trace mcount test supportHeiko Carstens2-12/+27
Add support for early test if the function tracer is enabled or disabled. Saves some extra function calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] ftrace: add dynamic ftrace supportHeiko Carstens10-29/+276
Dynamic ftrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] kprobes: use probe_kernel_writeHeiko Carstens1-29/+2
Use proble_kernel_write() to patch the kernel. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] maccess: arch specific probe_kernel_write() implementationHeiko Carstens2-1/+62
Add an s390 specific probe_kernel_write() function which allows to write to the kernel text segment even if write protection is enabled. This is implemented using the lra (load real address) and stura (store using real address) instructions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] maccess: add weak attribute to probe_kernel_writeHeiko Carstens1-1/+1
probe_kernel_write() gets used to write to the kernel address space. E.g. to patch the kernel (kgdb, ftrace, kprobes...). Some architectures however enable write protection for the kernel text section, so that writes to this region would fault. This patch allows to specify an architecture specific version of probe_kernel_write() which allows to handle and bypass write protection of the text segment. That way it is still possible to catch random writes to kernel text and explicitly allow writes via this interface. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] profile_tick called twiceMartin Schwidefsky1-7/+0
profile_tick is called twice for every clock comparator interrupt. The generic clock event code does it in tick_sched_timer and the s390 backend code in clock_comparator_work. That is one too many, remove the one in the arch backend code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] dasd: forward internal errors to dasd_sleep_on callerStefan Weinhuber4-9/+31
If a DASD requests is started with dasd_sleep_on and fails, then the calling function may need to know the reason for the failure. In cases of hardware errors it can inspect the sense data in the irb, but when the reason is internal (e.g. start_IO failed) then it needs a meaningfull return code. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] dasd: sync after async probeSebastian Ott2-2/+14
Some functions called as a late_initcall depend on completely initialized devices. Since commit f3445a1a656bc26b07946cc6d20de1ef07c8d116 the dasd driver uses the new async framework and relies on the fact that synchronization is done in prepare_namespace which is called after the late_initcalls. Fix this by calling async_synchronize_full at the end of the related init functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] dasd: check_characteristics cleanupSebastian Ott4-19/+18
Fix a broken memset (sizeof pointer vs sizeof the underlying structure) by cleaning up the involved functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] dasd: no High Performance FICON in 31-bit modeStefan Weinhuber1-3/+8
The High Performance FICON feature is not supported in 31-bit mode, no matter what the various flags say. So we need to check for the CONFIG_64BIT option as well. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] dcssblk: revert devt conversionGerald Schaefer1-2/+2
git commit f331c0296f2a9fee0d396a70598b954062603015 changed users of ->first_minor to devt. This broke device handling in dcssblk, so that no additional devices could be added after the first one. This patch reverts the devt conversion to the previous ->first_minor handling. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qsRoel Kluin1-1/+1
Do not go beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] vmalloc: add vmalloc kernel parameter supportHeiko Carstens2-5/+18
With the kernel parameter 'vmalloc=<size>' the size of the vmalloc area can be specified. This can be used to increase or decrease the size of the area. Works in the same way as on some other architectures. This can be useful for features which make excessive use of vmalloc and wouldn't work otherwise. The default sizes remain unchanged: 96MB for 31 bit kernels and 1GB for 64 bit kernels. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] uaccess: use might_fault() instead of might_sleep()Heiko Carstens2-9/+9
Adds more checking in case lockdep is turned on. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] 3270: lock dependency fixesMartin Schwidefsky2-48/+32
Lockdep found a problem with the lock order of the view lock and the ccw device lock. raw3270_activate_view/raw3270_deactivate_view first take the ccw device lock then call the activate/deactivate functions of the view which take view lock. The update functions of the con3270/tty3270 view will first take the view lock, then take the ccw device lock. To fix this the activate/deactivate functions are changed to avoid taking the view lock by moving the functions calls that modify the 3270 output buffer to the update function which is called by a timer. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] 3270: do not register with tty_register_deviceMartin Schwidefsky1-15/+0
The tty3270_notifier that calls tty_register_device / tty_unregister_device is harmful in two ways: 1) the device node that is create is wrong because the minor numbers for 3270 tty start with 1 and tty_notifier passes the minor as index. 2) If 1) is corrected you'll get a warning: WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x4c/0x60() sysfs: duplicate filename '227:1' can not be created The 227:1 link is already created by raw3270_create_attributes to refer to ../../class/tty/tty<devno>. There cannot be two links. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] qdio: inline qdio_perf_stat_incJan Glauber2-16/+6
Move qdio_perf_stat_inc to the header file so it can be inlined. Remove unused qdio_perf_stat_dec. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] qdio: simplify error handling in irq handlerJan Glauber1-32/+12
The check for the device status in qdio_establish_handle_irq() had dead code. Remove the unused code and simplify the error handling. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] cio: fix sanity checks in device_ops.Sebastian Ott1-16/+8
Some sanity checks in device_ops.c test the output of container_of macros to be !NULL. Test the input parameters instead. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] secure computing arch backendHeiko Carstens6-9/+51
Enable secure computing on s390 as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] implement is_compat_taskHeiko Carstens7-19/+36
Implement is_compat_task and use it all over the place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] add mini sclp driverHeiko Carstens3-5/+342
This adds a mini sclp device driver for very early use. The primary and probably only use will be to emit a message to the console if the cpu doesn't provide the minimum required capabilities to run the kernel. After printing the message a disabled wait will be loaded and the machine stops operating. Printing the message is also part of this patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] use facility list for cpu type safety checkMartin Schwidefsky2-15/+35
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] implement interrupt-enabling rwlocksHeiko Carstens2-3/+56
arch backend for f5f7eac41db827a47b2163330eecd7bb55ae9f12 "Allow rwlocks to re-enable interrupts". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] merge cpu.h into cputime.hMartin Schwidefsky7-37/+24
All definition in cpu.h have to do with cputime accounting. Move them to cputime.h and remove the header file. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12[S390] vdso: kernel parameter syntaxMartin Schwidefsky1-2/+13
The syntax of the vdso kernel parameter is documented as vdso=[on|off]. The implementation uses vdso=[0|1], an invalid parameter string disables the vdso support. Fix the mismatch by adding vdso=[on|off] as additional parameter syntax. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-11block: fix kernel-doc in recent block/ changesRandy Dunlap2-13/+14
Fix kernel-doc warnings in recently changed block/ source code. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Merge branch 'for-linus' of ↵Linus Torvalds147-1834/+1707
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits) nilfs2: get rid of bd_mount_sem use from nilfs nilfs2: correct exclusion control in nilfs_remount function nilfs2: simplify remaining sget() use nilfs2: get rid of sget use for checking if current mount is present nilfs2: get rid of sget use for acquiring nilfs object nilfs2: remove meaningless EBUSY case from nilfs_get_sb function remove the call to ->write_super in __sync_filesystem nilfs2: call nilfs2_write_super from nilfs2_sync_fs jffs2: call jffs2_write_super from jffs2_sync_fs ufs: add ->sync_fs sysv: add ->sync_fs hfsplus: add ->sync_fs hfs: add ->sync_fs fat: add ->sync_fs ext2: add ->sync_fs exofs: add ->sync_fs bfs: add ->sync_fs affs: add ->sync_fs sanitize ->fsync() for affs repair bfs_write_inode(), switch bfs to simple_fsync() ...
2009-06-11Merge branch 'for-linus' of ↵Linus Torvalds23-187/+178
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: remove unecessary include of thread_info.h in entry.S m68knommu: enumerate INIT_THREAD fields properly headers_check fix: m68k, swab.h arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug( m68knommu: remove obsolete reset code m68knommu: move CPU reset code for the 5272 ColdFire into its platform code m68knommu: move CPU reset code for the 528x ColdFire into its platform code m68knommu: move CPU reset code for the 527x ColdFire into its platform code m68knommu: move CPU reset code for the 523x ColdFire into its platform code m68knommu: move CPU reset code for the 520x ColdFire into its platform code m68knommu: add CPU reset code for the 532x ColdFire m68knommu: add CPU reset code for the 5249 ColdFire m68knommu: add CPU reset code for the 5206e ColdFire m68knommu: add CPU reset code for the 5206 ColdFire m68knommu: add CPU reset code for the 5407 ColdFire m68knommu: add CPU reset code for the 5307 ColdFire m68knommu: merge system reset for code ColdFire 523x family m68knommu: fix system reset for ColdFire 527x family
2009-06-11kvm: remove the duplicated cpumask_clearYinghai Lu1-1/+0
zalloc_cpumask_var already cleared it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11x86: use zalloc_cpumask_var in arch_early_irq_initYinghai Lu1-2/+2
So we make sure MAXSMP gets a cleared cpumask Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11perfcounters: remove powerpc definitions of perf_counter_do_pendingStephen Rothwell2-3/+1
Commit 925d519ab82b6dd7aca9420d809ee83819c08db2 ("perf_counter: unify and fix delayed counter wakeup") added global definitions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11nilfs2: get rid of bd_mount_sem use from nilfsRyusuke Konishi4-9/+12
This will remove every bd_mount_sem use in nilfs. The intended exclusion control was replaced by the previous patch ("nilfs2: correct exclusion control in nilfs_remount function") for nilfs_remount(), and this patch will replace remains with a new mutex that this inserts in nilfs object. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11nilfs2: correct exclusion control in nilfs_remount functionRyusuke Konishi3-31/+33
nilfs_remount() changes mount state of a superblock instance. Even though nilfs accesses other superblock instances during mount or remount, the mount state was not properly protected in nilfs_remount(). Moreover, nilfs_remount() has a lock order reversal problem; nilfs_get_sb() holds: 1. bdev->bd_mount_sem 2. sb->s_umount (sget acquires) and nilfs_remount() holds: 1. sb->s_umount (locked by the caller in vfs) 2. bdev->bd_mount_sem To avoid these problems, this patch divides a semaphore protecting super block instances from nilfs->ns_sem, and applies it to the mount state protection in nilfs_remount(). With this change, bd_mount_sem use is removed from nilfs_remount() and the lock order reversal will be resolved. And the new rw-semaphore, nilfs->ns_super_sem will properly protect the mount state except the modification from nilfs_error function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11nilfs2: simplify remaining sget() useRyusuke Konishi4-25/+75
This simplifies the test function passed on the remaining sget() callsite in nilfs. Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount) in the test function passed to sget(), this patch first looks up the nilfs_sb_info struct which the given mount type matches, and then acquires the super block instance holding the nilfs_sb_info. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11nilfs2: get rid of sget use for checking if current mount is presentRyusuke Konishi2-60/+35
This stops using sget() for checking if an r/w-mount or an r/o-mount exists on the device. This elimination uses a back pointer to the current mount added to nilfs object. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11nilfs2: get rid of sget use for acquiring nilfs objectRyusuke Konishi3-65/+76
This will change the way to obtain nilfs object in nilfs_get_sb() function. Previously, a preliminary sget() call was performed, and the nilfs object was acquired from a super block instance found by the sget() call. This patch, instead, instroduces a new dedicated function find_or_create_nilfs(); as the name implies, the function finds an existent nilfs object from a global list or creates a new one if no object is found on the device. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11nilfs2: remove meaningless EBUSY case from nilfs_get_sb functionRyusuke Konishi1-2/+0
The following EBUSY case in nilfs_get_sb() is meaningless. Indeed, this error code is never returned to the caller. if (!s->s_root) { ... } else if (!(s->s_flags & MS_RDONLY)) { err = -EBUSY; } This simply removes the else case. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11remove the call to ->write_super in __sync_filesystemChristoph Hellwig1-2/+0
Now that all filesystems provide ->sync_fs methods we can change __sync_filesystem to only call ->sync_fs. This gives us a clear separation between periodic writeouts which are driven by ->write_super and data integrity syncs that go through ->sync_fs. (modulo file_fsync which is also going away) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11nilfs2: call nilfs2_write_super from nilfs2_sync_fsChristoph Hellwig1-0/+2
The call to ->write_super from __sync_filesystem will go away, so make sure nilfs2 performs the same actions from inside ->sync_fs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11jffs2: call jffs2_write_super from jffs2_sync_fsChristoph Hellwig1-0/+2
The call to ->write_super from __sync_filesystem will go away, so make sure jffs2 performs the same actions from inside ->sync_fs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11ufs: add ->sync_fsChristoph Hellwig1-10/+22
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11sysv: add ->sync_fsChristoph Hellwig1-6/+13
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11hfsplus: add ->sync_fsChristoph Hellwig1-5/+11
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11hfs: add ->sync_fsChristoph Hellwig1-0/+11
Add a ->sync_fs method for data integrity syncs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11fat: add ->sync_fsChristoph Hellwig1-0/+11
Add a ->sync_fs method for data integrity syncs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11ext2: add ->sync_fsChristoph Hellwig1-14/+27
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11exofs: add ->sync_fsChristoph Hellwig1-3/+13
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11bfs: add ->sync_fsChristoph Hellwig1-11/+21
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 09:04:18 +0000