summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-02-17tty: remove filp from the USB tty ioctlsAlan Cox22-30/+29
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox70-129/+120
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox69-101/+98
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17MAINTAINERS: Add myself as a maintainer for altera_uart/altera_jtaguartTobias Klauser1-0/+10
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: serial: altera_uart: Use port->regshift to store bus shiftTobias Klauser1-7/+7
Use the regshift member of struct uart_port to store the address stride from platform data. This way we can save one dereference per call of altera_uart_readl and altera_uart_writel. This also allows us to use the driver without platform data, which is needed for device tree support in the Nios2 port. Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: serial: altera_uart: Handle pdev->id == -1 in altera_uart_removeTobias Klauser1-1/+7
Commit 6b5756f176568a710d008d3b478128fafb6707f0 introduced the possibility for pdev->id being -1 but the change was not done equally in altera_uart_remove. This patch fixes this. Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty,vt: fix VT_SETACTIVATE console switchJiri Olsa1-1/+2
using VT_SETACTIVATE ioctl for console switch did not work, since it put wrong param to the set_console function. Also ioctl returned misleading error, because of the missing break statement. I wonder anyone has ever used this one :). Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17atmel_serial: enable PPS supportViktar Palstsiuk1-0/+16
Enables PPS support in atmel serial driver to make PPS API working. Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: Add msm_smd_tty driverNiranjana Vishwanathapura3-0/+246
msm_smd_tty driver provides tty device interface to 'DS' and 'GPSNMEA' streaming SMD ports. Cc: Brian Swetland <swetland@google.com> Signed-off-by: Niranjana Vishwanathapura <nvishwan@codeaurora.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: change the divisor latch only when prescalar actually changedYin Kangkai1-12/+20
In 8250.c original ns16550 autoconfig code, we change the divisor latch when we goto to high speed mode, we're assuming the previous speed is legacy. This some times is not true. For example in a system with both CONFIG_SERIAL_8250 and CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called twice, one in serial8250_init/probe() and the other is from serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A, it's already in high speed mode, change the divisor latch (quot << 3) in this case will make the UART console garbled. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: also set the uartclk value in resume after goes to highspeedYin Kangkai1-0/+1
For any reason if the NS16550A was not work in high speed mode (e.g. we hold NS16550A from going to high speed mode in autoconfig_16550a()), now we are resume from suspend, we should also set the uartclk to the correct value. Otherwise it is still the old 1843200 and that will bring issues. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: ifx6x60: minor cleanupRuss Gorby2-6/+4
renamed spi_driver variable to not be h/w specific set driver name to use DRVNAME define removed commented-out define Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: ifx6x60: probe routine needs to call spi_setupRuss Gorby1-0/+9
The probe routine should call spi_setup() to configure the SPI bus so it can properly communicate with the device. E.g. the device operates in SPI mode 1. Called spi_setup to configure SPI mode, max_speed_hz, and bpw Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: ifx6x60: set SPI max_speed_hz based on platform typeRuss Gorby1-1/+2
Platforms containing the 6260 can run up to 25Mhz. For these platforms set max_speed_hz to 25Mhz. Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: ifx6x60: changed internal bpw from boolean to intRuss Gorby1-2/+2
driver should support 32bit SPI transfers. The boolean variable only allowed 8/16. Changed to support 8/16/32 for future enabling of 32 bpw. Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: ifx6x60: dma_alloc_coherent must use parent devRuss Gorby1-2/+2
This driver is a SPI protocol driver and has no DMA ops associated with the device so the call will fail. Furthermore, the DMA allocation made here will be used by the SPI controller driver (parent dev) so it makes sense to pass that device instead. Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17serial: ifx6x60: fixed call to tty_port_initRuss Gorby1-1/+1
The port ops must be set AFTER calling port init as that function zeroes the structure Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty,vcs removing con_buf/conf_buf_mtxJiri Olsa3-66/+52
seems there's no longer need for using con_buf/conf_buf_mtx as vcs_read/vcs_write buffer for user's data. The do_con_write function, that was the other user of this, is currently using its own kmalloc-ed buffer. Not sure when this got changed, as I was able to find this code in 2.6.9, but it's already gone as far as current git history goes - 2.6.12-rc2. AFAICS there's a behaviour change with the current change. The lseek is not completely mutually exclusive with the vcs_read/vcs_write - the file->f_pos might get updated via lseek callback during the vcs_read/vcs_write processing. I tried to find out if the prefered behaviour is to keep this in sync within read/write/lseek functions, but I did not find any pattern on different places. I guess if user end up calling write/lseek from different threads she should know what she's doing. If needed we could use dedicated fd mutex/buffer. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty,vcs: lseek/VC-release race fixJiri Olsa1-0/+18
there's a race between vcs's lseek handler and VC release. The lseek handler does not hold console_lock and touches VC's size info. If during this the VC got released, there's an access violation. Following program triggers the issue for me: [SNIP] #define _BSD_SOURCE #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <sys/ioctl.h> #include <linux/vt.h> #include <unistd.h> #include <errno.h> static int run_seek(void) { while(1) { int fd; fd = open("./vcs30", O_RDWR); while(lseek(fd, 0, 0) != -1); close(fd); } } static int open_ioctl_tty(void) { return open("/dev/tty1", O_RDWR); } static int do_ioctl(int fd, int req, int i) { return ioctl(fd, req, i); } #define INIT(i) do_ioctl(ioctl_fd, VT_ACTIVATE, i) #define SHUT(i) do_ioctl(ioctl_fd, VT_DISALLOCATE, i) int main(int argc, char **argv) { int ioctl_fd = open_ioctl_tty(); if (ioctl < 0) { perror("open tty1 failed\n"); return -1; } if ((-1 == mknod("vcs30", S_IFCHR|0666, makedev(7, 30))) && (errno != EEXIST)) { printf("errno %d\n", errno); perror("failed to create vcs30"); return -1; } do_ioctl(ioctl_fd, VT_LOCKSWITCH, 0); if (!fork()) run_seek(); while(1) { INIT(30); SHUT(30); } return 0; } [SNIP] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17TTY: use appropriate printk priority levelMandeep Singh Baines1-7/+8
printk()s without a priority level default to KERN_WARNING. To reduce noise at KERN_WARNING, this patch set the priority level appriopriately for unleveled printks()s. This should be useful to folks that look at dmesg warnings closely. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17hvc: add Blackfin JTAG console supportMike Frysinger3-0/+115
This converts the existing bfin_jtag_comm TTY driver to the HVC layer so that the common HVC code can worry about all of the TTY/polling crap and leave the Blackfin code to worry about the Blackfin bits. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17vt: Add virtual console keyboard mode OFFArthur Taylor4-3/+9
virtual console: add keyboard mode OFF Add a new mode for the virtual console keyboard OFF in which all input other than shift keys is ignored. Prevents vt input buffers from overflowing when a program opens but doesn't read from a tty, like X11 using evdev for input. Signed-off-by: Arthur Taylor <art@ified.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03hvc_dcc: Simplify assembly for v6 and v7 ARMStephen Boyd1-24/+0
The inline assembly differences for v6 vs. v7 in the hvc_dcc driver are purely optimizations. On a v7 processor, an mrc with the pc sets the condition codes to the 28-31 bits of the register being read. It just so happens that the TX/RX full bits the DCC driver is testing for are high enough in the register to be put into the condition codes. On a v6 processor, this "feature" isn't implemented and thus we have to do the usual read, mask, test operations to check for TX/RX full. Since we already test the RX/TX full bits before calling __dcc_getchar() and __dcc_putchar() we don't actually need to do anything special for v7 over v6. The only difference is in hvc_dcc_get_chars(). We would test RX full, poll RX full, and then read a character from the buffer, whereas now we will test RX full, read a character from the buffer, and then test RX full again for the second iteration of the loop. It doesn't seem possible for the buffer to go from full to empty between testing the RX full and reading a character. Therefore, replace the v7 versions with the v6 versions and everything works the same. Acked-by: Tony Lindgren <tony@atomide.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03hvc_dcc: Simplify put_chars()/get_chars() loopsStephen Boyd1-8/+4
Casting and anding with 0xff is unnecessary in hvc_dcc_put_chars() since buf is already a char[]. __dcc_get_char() can't return an int less than 0 since it only returns a char. Simplify the if statement in hvc_dcc_get_chars() to take this into account. Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03hvc_dcc: Fix bad code generation by marking assembly volatileStephen Boyd1-6/+5
Without marking the asm __dcc_getstatus() volatile my compiler decides it can cache the value of __ret in a register and then check the value of it continually in hvc_dcc_put_chars() (I had to replace get_wait/put_wait with 1 and fixup the branch otherwise my disassembler barfed on __dcc_(get|put)char). 00000000 <hvc_dcc_put_chars>: 0: ee103e11 mrc 14, 0, r3, cr0, cr1, {0} 4: e3a0c000 mov ip, #0 ; 0x0 8: e2033202 and r3, r3, #536870912 ; 0x20000000 c: ea000006 b 2c <hvc_dcc_put_chars+0x2c> 10: e3530000 cmp r3, #0 ; 0x0 14: 1afffffd bne 10 <hvc_dcc_put_chars+0x10> 18: e7d1000c ldrb r0, [r1, ip] 1c: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 20: 2afffffd bcs 1c <hvc_dcc_put_chars+0x1c> 24: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 28: e28cc001 add ip, ip, #1 ; 0x1 2c: e15c0002 cmp ip, r2 30: bafffff6 blt 10 <hvc_dcc_put_chars+0x10> 34: e1a00002 mov r0, r2 38: e12fff1e bx lr As you can see, the value of the mrc is checked against DCC_STATUS_TX (bit 29) and then stored in r3 for later use. Marking the asm volatile produces the following: 00000000 <hvc_dcc_put_chars>: 0: e3a03000 mov r3, #0 ; 0x0 4: ea000007 b 28 <hvc_dcc_put_chars+0x28> 8: ee100e11 mrc 14, 0, r0, cr0, cr1, {0} c: e3100202 tst r0, #536870912 ; 0x20000000 10: 1afffffc bne 8 <hvc_dcc_put_chars+0x8> 14: e7d10003 ldrb r0, [r1, r3] 18: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 1c: 2afffffd bcs 18 <hvc_dcc_put_chars+0x18> 20: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 24: e2833001 add r3, r3, #1 ; 0x1 28: e1530002 cmp r3, r2 2c: bafffff5 blt 8 <hvc_dcc_put_chars+0x8> 30: e1a00002 mov r0, r2 34: e12fff1e bx lr which looks better and actually works. Mark all the inline assembly in this file as volatile since we don't want the compiler to optimize away these statements or move them around in any way. Acked-by: Tony Lindgren <tony@atomide.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial: pch_uart: revert Kconfig for non-DMA modeTomoya MORINAGA1-3/+2
PCH_DMA is not always enabled when a user uses PCH_UART. Since overhead of DMA is not small, in case of low frequent communication, without DMA is better. Thus, "select PCH_DMA" and DMADEVICES are unnecessary Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial: pch_uart: support new device ML7213Tomoya MORINAGA2-8/+24
Support ML7213 device of OKI SEMICONDUCTOR. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-0368328serial: remove unsed m68k_serial->tqueue_hangupTejun Heo2-24/+0
m68k_serial->tqueue_hangup is unused. Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial-core: reset the console speed on resumeYin Kangkai1-3/+3
On some platforms, we need to restore the console speed on resume even it was not suspended (no_console_suspend), and on others we don't have to do that. So don't care about the "console_suspend_enabled" and unconditionally reset the console speed if it is a console. This is actually a redo of ba15ab0 (Set proper console speed on resume if console suspend is disabled) from Deepak Saxena. I also tried to investigate more to find out if this change will break others, here is what I've found out: commit 891b9dd10764352926e1e107756aa229dfa2c210 Author: Jason Wang <jason77.wang@gmail.com> serial-core: restore termios settings when resume console ports commit ca2e71aa8cfb0056ce720f3fd53f59f5fac4a3e1 Author: Jason Wang <jason77.wang@gmail.com> serial-core: skip call set_termios/console_start when no_console_suspend commit 4547be7809a3b775ce750ec7f8b5748954741523 Author: Stanislav Brabec <sbrabec@suse.cz> serial-core: resume serial hardware with no_console_suspend commit ba15ab0e8de0d4439a91342ad52d55ca9e313f3d Author: Deepak Saxena <dsaxena@laptop.org> Set proper console speed on resume if console suspend is disabled from ba15ab0, we learned that, even if the console suspend is disabled (when no_console_suspend is set), we may still need to "reset the port to the state it was in before we suspended." Then with 4547be7, this piece of code is removed. And then Jason Wang added that back in ca2e71a and 891b9dd, to fix some breakage on OMAP3EVM platform. From ca2e71a we learned that the "set_termios" things is actually needed by both console is suspended and not suspended. That's why I removed the console_suspended_enabled condition, and only call console_start() when we actually suspeneded it. I also noticed in this thread: http://marc.info/?t=129079257100004&r=1&w=2, which talked about on some platforms, UART HW will be cut power whether or not we set no_console_suspend, and then on resume it does not work quite well. I have a similar HW, and this patch fixed this issue, don't know if this patch also works on their platforms. [Update: Stanislav tested this patch on Zaurus and reported it improves the situation. Thanks.] CC: Greg KH <greg@kroah.com> CC: Deepak Saxena <dsaxena@laptop.org> CC: Jason Wang <jason77.wang@gmail.com> CC: Stanislav Brabec <sbrabec@suse.cz> CC: Daniel Drake <dsd@laptop.org> Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial: mrst_max3110: make buffer largerDan Carpenter1-1/+1
This is used to store the spi_device ->modalias so they have to be the same size. SPI_NAME_SIZE is 32. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03tty_ldisc: don't use flush_scheduled_work()Tejun Heo1-2/+15
flush_scheduled_work() is scheduled to be deprecated. Explicitly sync flush the used work items instead. Note that before this change, flush_scheduled_work() wouldn't have properly flushed tty->buf.work if it were on timer. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial: omap-serial: Enable the UART wake-up bits alwaysJarkko Nikula1-3/+3
OMAP can do also dynamic idling so wake-up enable register should be set also while system is running. If UART_OMAP_WER is not set, then for instance the RX activity cannot wake up the UART port that is sleeping. This RX wake-up feature was working when the 8250 driver was used instead of omap-serial. Reason for this is that the 8250 doesn't set the UART_OMAP_WER and then arch/arm/mach-omap2/pm34xx.c ends up saving and restoring the reset default which is the same than value OMAP_UART_WER_MOD_WKUP here. Fix this by moving the conditional UART_OMAP_WER write from serial_omap_pm into serial_omap_startup where wake-up bits are set unconditionally. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03OMAP: Enable Magic SysRq on serial console ttyOxThomas Weber1-1/+4
Magic SysRq key is not working for OMAP on new serial console ttyOx because SUPPORT_SYSRQ is not defined for omap-serial. This patch defines SUPPORT_SYSRQ in omap-serial and enables handling of Magic SysRq character. Further there is an issue of losing first break character. Removing the reset of the lsr_break_flag fixes this issue. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Govindraj.R <govindraj.raja@ti.com> Tested-by: Manjunath G Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial: ifx6x60: expanded info available from platform dataRuss Gorby3-24/+32
Some platform attributes (e.g. max_hz, use_dma) were being intuited from the modem type. These things should be specified by the platform data. Added max_hz, use_dma to ifx_modem_platform_data definition, replaced is_6160 w/ modem_type, and changed clients accordingly Signed-off-by: Russ Gorby <russ.gorby@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03serial: mfd: remove the timeout workaround for A0Feng Tang1-38/+0
This is kind of a revert for commit 669b7a0938e "hsu: add a periodic timer to check dma rx channel", which is a workaround for a bug in A0 stepping silicon, where a dma rx data timeout is missing for some case. Since new silicon has fixed it and the old version is phasing out, no need to carry on it any more. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03tty: serial: bfin_sport_uart: fix signedness errorVasiliy Kulikov1-1/+1
sport->port.irq is unsigned, check for <0 doesn't make sense. Explicitly cast it to int to check for error. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-01Linux 2.6.38-rc3v2.6.38-rc3Linus Torvalds1-1/+1
2011-02-01Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds25-210/+174
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSv4 readdir loses entries NFS: Micro-optimize nfs4_decode_dirent() NFS: Fix an NFS client lockdep issue NFS construct consistent co_ownerid for v4.1 NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount NFS improve pnfs_put_deviceid_cache debug print NFS fix cb_sequence error processing NFS do not find client in NFSv4 pg_authenticate NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!" NFS: Prevent memory allocation failure in nfsacl_encode() NFS: nfsacl_{encode,decode} should return signed integer NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!" NFS: Fix "kernel BUG at fs/aio.c:554!" NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds(). NFS: fix handling of malloc failure during nfs_flush_multi()
2011-02-01Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds5-35/+41
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: smp_on_up: allow non-ARM SMP processors ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ ARM: initrd: disable initrd if passed address overlaps reserved region ARM: footbridge: fix debug macros ARM: mmci: round down the bytes transferred on error ARM: mmci: complete the transaction on error ARM: 6642/1: mmci: calculate remaining bytes at error correctly
2011-02-01Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds6-34/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR arm: omap2: mux: fix compile warning omap1: Simplify use of omap_irq_flags omap2+: Fix unused variable warning for omap_irq_base
2011-02-01kernel.h: fix kernel-doc warningRandy Dunlap1-1/+1
Fix kernel-doc warning in kernel.h from commit 7ef88ad56145 ("BUILD_BUG_ON: make it handle more cases"): Warning(include/linux/kernel.h:605): No description found for parameter 'condition' Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-01Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds10-71/+152
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_bmap_add_extent_delay_real should init br_startblock xfs: fix dquot shaker deadlock xfs: handle CIl transaction commit failures correctly xfs: limit extsize to size of AGs and/or MAXEXTLEN xfs: prevent extsize alignment from exceeding maximum extent size xfs: limit extent length for allocation to AG size xfs: speculative delayed allocation uses rounddown_power_of_2 badly xfs: fix efi item leak on forced shutdown xfs: fix log ticket leak on forced shutdown.
2011-02-01virtio: update MAINTAINERSMichael S. Tsirkin1-0/+10
Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-01Merge branch 'usb-linus' of ↵Linus Torvalds48-381/+568
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits) usb: gadget: composite: avoid access beyond array max length USB: serial: handle Data Carrier Detect changes USB: gadget: Fix endpoint representation in ci13xxx_udc USB: gadget: Fix error path in ci13xxx_udc gadget probe function usb: pch_udc: Fix the worning log issue at gadget driver remove USB: serial: Updated support for ICOM devices USB: ehci-mxc: add work-around for efika mx/sb bug USB: unbreak ehci-mxc on otg port of i.MX27 drivers: update to pl2303 usb-serial to support Motorola cables USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products USB serial: add missing .usb_driver field in serial drivers USB: ehci-fsl: Fix 'have_sysif_regs' detection USB: g_printer: fix bug in module parameter definitions USB: g_printer: fix bug in unregistration USB: uss720: remove duplicate USB device MAINTAINERS: add ueagle-atm entry USB: EHCI: fix DMA deallocation bug USB: pch_udc: support new device ML7213 IOH usb: pch_udc: Fixed issue which does not work with g_serial usb: set ep_dev async suspend should be later than device_initialize ...
2011-02-01Merge branch 'staging-linus' of ↵Linus Torvalds27-134/+294
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ...
2011-02-01Merge branch 'tty-linus' of ↵Linus Torvalds5-51/+58
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/serial: fix apbuart build n_hdlc: fix read and write locking serial: unbreak billionton CF card tty: use for_each_console() and WARN() on sysfs failures vt: fix issue when fbcon wants to takeover a second time. Fix up trivial conflict in drivers/tty/tty_io.c
2011-01-31ARM: smp_on_up: allow non-ARM SMP processorsRussell King1-12/+10
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: <stable@kernel.org> Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+Russell King1-16/+17
Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: initrd: disable initrd if passed address overlaps reserved regionRussell King1-0/+6
Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: footbridge: fix debug macrosRussell King1-2/+2
0ea1293 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 20:51:37 +0000