diff options
Diffstat (limited to 'net')
53 files changed, 0 insertions, 31655 deletions
diff --git a/net/Kconfig b/net/Kconfig index 17ca213e1f85..8614a9ccfbef 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -376,7 +376,6 @@ endmenu source "net/ax25/Kconfig" source "net/can/Kconfig" -source "net/irda/Kconfig" source "net/bluetooth/Kconfig" source "net/rxrpc/Kconfig" source "net/kcm/Kconfig" diff --git a/net/Makefile b/net/Makefile index bed80fa398b7..3d3feff3643b 100644 --- a/net/Makefile +++ b/net/Makefile @@ -31,7 +31,6 @@ obj-$(CONFIG_NETROM) += netrom/ obj-$(CONFIG_ROSE) += rose/ obj-$(CONFIG_AX25) += ax25/ obj-$(CONFIG_CAN) += can/ -obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_BT) += bluetooth/ obj-$(CONFIG_SUNRPC) += sunrpc/ obj-$(CONFIG_AF_RXRPC) += rxrpc/ diff --git a/net/irda/Kconfig b/net/irda/Kconfig deleted file mode 100644 index c8671a7ffb3c..000000000000 --- a/net/irda/Kconfig +++ /dev/null @@ -1,96 +0,0 @@ -# -# IrDA protocol configuration -# - -menuconfig IRDA - depends on NET && !S390 - tristate "IrDA (infrared) subsystem support" - select CRC_CCITT - ---help--- - Say Y here if you want to build support for the IrDA (TM) protocols. - The Infrared Data Associations (tm) specifies standards for wireless - infrared communication and is supported by most laptops and PDA's. - - To use Linux support for the IrDA (tm) protocols, you will also need - some user-space utilities like irattach. For more information, see - the file <file:Documentation/networking/irda.txt>. You also want to - read the IR-HOWTO, available at - <http://www.tldp.org/docs.html#howto>. - - If you want to exchange bits of data (vCal, vCard) with a PDA, you - will need to install some OBEX application, such as OpenObex : - <http://sourceforge.net/projects/openobex/> - - To compile this support as a module, choose M here: the module will - be called irda. - -comment "IrDA protocols" - depends on IRDA - -source "net/irda/irlan/Kconfig" - -source "net/irda/irnet/Kconfig" - -source "net/irda/ircomm/Kconfig" - -config IRDA_ULTRA - bool "Ultra (connectionless) protocol" - depends on IRDA - help - Say Y here to support the connectionless Ultra IRDA protocol. - Ultra allows to exchange data over IrDA with really simple devices - (watch, beacon) without the overhead of the IrDA protocol (no handshaking, - no management frames, simple fixed header). - Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1); - -comment "IrDA options" - depends on IRDA - -config IRDA_CACHE_LAST_LSAP - bool "Cache last LSAP" - depends on IRDA - help - Say Y here if you want IrLMP to cache the last LSAP used. This - makes sense since most frames will be sent/received on the same - connection. Enabling this option will save a hash-lookup per frame. - - If unsure, say Y. - -config IRDA_FAST_RR - bool "Fast RRs (low latency)" - depends on IRDA - ---help--- - Say Y here is you want IrLAP to send fast RR (Receive Ready) frames - when acting as a primary station. - Disabling this option will make latency over IrDA very bad. Enabling - this option will make the IrDA stack send more packet than strictly - necessary, thus reduce your battery life (but not that much). - - Fast RR will make IrLAP send out a RR frame immediately when - receiving a frame if its own transmit queue is currently empty. This - will give a lot of speed improvement when receiving much data since - the secondary station will not have to wait the max. turn around - time (usually 500ms) before it is allowed to transmit the next time. - If the transmit queue of the secondary is also empty, the primary will - start backing-off before sending another RR frame, waiting longer - each time until the back-off reaches the max. turn around time. - This back-off increase in controlled via - /proc/sys/net/irda/fast_poll_increase - - If unsure, say Y. - -config IRDA_DEBUG - bool "Debug information" - depends on IRDA - help - Say Y here if you want the IrDA subsystem to write debug information - to your syslog. You can change the debug level in - /proc/sys/net/irda/debug . - When this option is enabled, the IrDA also perform many extra internal - verifications which will usually prevent the kernel to crash in case of - bugs. - - If unsure, say Y (since it makes it easier to find the bugs). - -source "drivers/net/irda/Kconfig" - diff --git a/net/irda/Makefile b/net/irda/Makefile deleted file mode 100644 index 187f6c563a4b..000000000000 --- a/net/irda/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the Linux IrDA protocol layer. -# - -obj-$(CONFIG_IRDA) += irda.o -obj-$(CONFIG_IRLAN) += irlan/ -obj-$(CONFIG_IRNET) += irnet/ -obj-$(CONFIG_IRCOMM) += ircomm/ - -irda-y := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \ - irlap.o irlap_event.o irlap_frame.o timer.o qos.o irqueue.o \ - irttp.o irda_device.o irias_object.o wrapper.o af_irda.o \ - discovery.o parameters.o irnetlink.o irmod.o -irda-$(CONFIG_PROC_FS) += irproc.o -irda-$(CONFIG_SYSCTL) += irsysctl.o diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c deleted file mode 100644 index 23fa7c8b09a5..000000000000 --- a/net/irda/af_irda.c +++ /dev/null @@ -1,2695 +0,0 @@ -/********************************************************************* - * - * Filename: af_irda.c - * Version: 0.9 - * Description: IrDA sockets implementation - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun May 31 10:12:43 1998 - * Modified at: Sat Dec 25 21:10:23 1999 - * Modified by: Dag Brattli <dag@brattli.net> - * Sources: af_netroom.c, af_ax25.c, af_rose.c, af_x25.c etc. - * - * Copyright (c) 1999 Dag Brattli <dagb@cs.uit.no> - * Copyright (c) 1999-2003 Jean Tourrilhes <jt@hpl.hp.com> - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - * Linux-IrDA now supports four different types of IrDA sockets: - * - * o SOCK_STREAM: TinyTP connections with SAR disabled. The - * max SDU size is 0 for conn. of this type - * o SOCK_SEQPACKET: TinyTP connections with SAR enabled. TTP may - * fragment the messages, but will preserve - * the message boundaries - * o SOCK_DGRAM: IRDAPROTO_UNITDATA: TinyTP connections with Unitdata - * (unreliable) transfers - * IRDAPROTO_ULTRA: Connectionless and unreliable data - * - ********************************************************************/ - -#include <linux/capability.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/socket.h> -#include <linux/sockios.h> -#include <linux/slab.h> -#include <linux/sched/signal.h> -#include <linux/init.h> -#include <linux/net.h> -#include <linux/irda.h> -#include <linux/poll.h> - -#include <asm/ioctls.h> /* TIOCOUTQ, TIOCINQ */ -#include <linux/uaccess.h> - -#include <net/sock.h> -#include <net/tcp_states.h> - -#include <net/irda/af_irda.h> - -static int irda_create(struct net *net, struct socket *sock, int protocol, int kern); - -static const struct proto_ops irda_stream_ops; -static const struct proto_ops irda_seqpacket_ops; -static const struct proto_ops irda_dgram_ops; - -#ifdef CONFIG_IRDA_ULTRA -static const struct proto_ops irda_ultra_ops; -#define ULTRA_MAX_DATA 382 -#endif /* CONFIG_IRDA_ULTRA */ - -#define IRDA_MAX_HEADER (TTP_MAX_HEADER) - -/* - * Function irda_data_indication (instance, sap, skb) - * - * Received some data from TinyTP. Just queue it on the receive queue - * - */ -static int irda_data_indication(void *instance, void *sap, struct sk_buff *skb) -{ - struct irda_sock *self; - struct sock *sk; - int err; - - self = instance; - sk = instance; - - err = sock_queue_rcv_skb(sk, skb); - if (err) { - pr_debug("%s(), error: no more mem!\n", __func__); - self->rx_flow = FLOW_STOP; - - /* When we return error, TTP will need to requeue the skb */ - return err; - } - - return 0; -} - -/* - * Function irda_disconnect_indication (instance, sap, reason, skb) - * - * Connection has been closed. Check reason to find out why - * - */ -static void irda_disconnect_indication(void *instance, void *sap, - LM_REASON reason, struct sk_buff *skb) -{ - struct irda_sock *self; - struct sock *sk; - - self = instance; - - pr_debug("%s(%p)\n", __func__, self); - - /* Don't care about it, but let's not leak it */ - if(skb) - dev_kfree_skb(skb); - - sk = instance; - if (sk == NULL) { - pr_debug("%s(%p) : BUG : sk is NULL\n", - __func__, self); - return; - } - - /* Prevent race conditions with irda_release() and irda_shutdown() */ - bh_lock_sock(sk); - if (!sock_flag(sk, SOCK_DEAD) && sk->sk_state != TCP_CLOSE) { - sk->sk_state = TCP_CLOSE; - sk->sk_shutdown |= SEND_SHUTDOWN; - - sk->sk_state_change(sk); - - /* Close our TSAP. - * If we leave it open, IrLMP put it back into the list of - * unconnected LSAPs. The problem is that any incoming request - * can then be matched to this socket (and it will be, because - * it is at the head of the list). This would prevent any - * listening socket waiting on the same TSAP to get those - * requests. Some apps forget to close sockets, or hang to it - * a bit too long, so we may stay in this dead state long - * enough to be noticed... - * Note : all socket function do check sk->sk_state, so we are - * safe... - * Jean II - */ - if (self->tsap) { - irttp_close_tsap(self->tsap); - self->tsap = NULL; - } - } - bh_unlock_sock(sk); - - /* Note : once we are there, there is not much you want to do - * with the socket anymore, apart from closing it. - * For example, bind() and connect() won't reset sk->sk_err, - * sk->sk_shutdown and sk->sk_flags to valid values... - * Jean II - */ -} - -/* - * Function irda_connect_confirm (instance, sap, qos, max_sdu_size, skb) - * - * Connections has been confirmed by the remote device - * - */ -static void irda_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, __u8 max_header_size, - struct sk_buff *skb) -{ - struct irda_sock *self; - struct sock *sk; - - self = instance; - - pr_debug("%s(%p)\n", __func__, self); - - sk = instance; - if (sk == NULL) { - dev_kfree_skb(skb); - return; - } - - dev_kfree_skb(skb); - // Should be ??? skb_queue_tail(&sk->sk_receive_queue, skb); - - /* How much header space do we need to reserve */ - self->max_header_size = max_header_size; - - /* IrTTP max SDU size in transmit direction */ - self->max_sdu_size_tx = max_sdu_size; - - /* Find out what the largest chunk of data that we can transmit is */ - switch (sk->sk_type) { - case SOCK_STREAM: - if (max_sdu_size != 0) { - net_err_ratelimited("%s: max_sdu_size must be 0\n", - __func__); - return; - } - self->max_data_size = irttp_get_max_seg_size(self->tsap); - break; - case SOCK_SEQPACKET: - if (max_sdu_size == 0) { - net_err_ratelimited("%s: max_sdu_size cannot be 0\n", - __func__); - return; - } - self->max_data_size = max_sdu_size; - break; - default: - self->max_data_size = irttp_get_max_seg_size(self->tsap); - } - - pr_debug("%s(), max_data_size=%d\n", __func__, - self->max_data_size); - - memcpy(&self->qos_tx, qos, sizeof(struct qos_info)); - - /* We are now connected! */ - sk->sk_state = TCP_ESTABLISHED; - sk->sk_state_change(sk); -} - -/* - * Function irda_connect_indication(instance, sap, qos, max_sdu_size, userdata) - * - * Incoming connection - * - */ -static void irda_connect_indication(void *instance, void *sap, - struct qos_info *qos, __u32 max_sdu_size, - __u8 max_header_size, struct sk_buff *skb) -{ - struct irda_sock *self; - struct sock *sk; - - self = instance; - - pr_debug("%s(%p)\n", __func__, self); - - sk = instance; - if (sk == NULL) { - dev_kfree_skb(skb); - return; - } - - /* How much header space do we need to reserve */ - self->max_header_size = max_header_size; - - /* IrTTP max SDU size in transmit direction */ - self->max_sdu_size_tx = max_sdu_size; - - /* Find out what the largest chunk of data that we can transmit is */ - switch (sk->sk_type) { - case SOCK_STREAM: - if (max_sdu_size != 0) { - net_err_ratelimited("%s: max_sdu_size must be 0\n", - __func__); - kfree_skb(skb); - return; - } - self->max_data_size = irttp_get_max_seg_size(self->tsap); - break; - case SOCK_SEQPACKET: - if (max_sdu_size == 0) { - net_err_ratelimited("%s: max_sdu_size cannot be 0\n", - __func__); - kfree_skb(skb); - return; - } - self->max_data_size = max_sdu_size; - break; - default: - self->max_data_size = irttp_get_max_seg_size(self->tsap); - } - - pr_debug("%s(), max_data_size=%d\n", __func__, - self->max_data_size); - - memcpy(&self->qos_tx, qos, sizeof(struct qos_info)); - - skb_queue_tail(&sk->sk_receive_queue, skb); - sk->sk_state_change(sk); -} - -/* - * Function irda_connect_response (handle) - * - * Accept incoming connection - * - */ -static void irda_connect_response(struct irda_sock *self) -{ - struct sk_buff *skb; - - skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, GFP_KERNEL); - if (skb == NULL) { - pr_debug("%s() Unable to allocate sk_buff!\n", - __func__); - return; - } - - /* Reserve space for MUX_CONTROL and LAP header */ - skb_reserve(skb, IRDA_MAX_HEADER); - - irttp_connect_response(self->tsap, self->max_sdu_size_rx, skb); -} - -/* - * Function irda_flow_indication (instance, sap, flow) - * - * Used by TinyTP to tell us if it can accept more data or not - * - */ -static void irda_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) -{ - struct irda_sock *self; - struct sock *sk; - - self = instance; - sk = instance; - BUG_ON(sk == NULL); - - switch (flow) { - case FLOW_STOP: - pr_debug("%s(), IrTTP wants us to slow down\n", - __func__); - self->tx_flow = flow; - break; - case FLOW_START: - self->tx_flow = flow; - pr_debug("%s(), IrTTP wants us to start again\n", - __func__); - wake_up_interruptible(sk_sleep(sk)); - break; - default: - pr_debug("%s(), Unknown flow command!\n", __func__); - /* Unknown flow command, better stop */ - self->tx_flow = flow; - break; - } -} - -/* - * Function irda_getvalue_confirm (obj_id, value, priv) - * - * Got answer from remote LM-IAS, just pass object to requester... - * - * Note : duplicate from above, but we need our own version that - * doesn't touch the dtsap_sel and save the full value structure... - */ -static void irda_getvalue_confirm(int result, __u16 obj_id, - struct ias_value *value, void *priv) -{ - struct irda_sock *self; - - self = priv; - if (!self) { - net_warn_ratelimited("%s: lost myself!\n", __func__); - return; - } - - pr_debug("%s(%p)\n", __func__, self); - - /* We probably don't need to make any more queries */ - iriap_close(self->iriap); - self->iriap = NULL; - - /* Check if request succeeded */ - if (result != IAS_SUCCESS) { - pr_debug("%s(), IAS query failed! (%d)\n", __func__, - result); - - self->errno = result; /* We really need it later */ - - /* Wake up any processes waiting for result */ - wake_up_interruptible(&self->query_wait); - - return; - } - - /* Pass the object to the caller (so the caller must delete it) */ - self->ias_result = value; - self->errno = 0; - - /* Wake up any processes waiting for result */ - wake_up_interruptible(&self->query_wait); -} - -/* - * Function irda_selective_discovery_indication (discovery) - * - * Got a selective discovery indication from IrLMP. - * - * IrLMP is telling us that this node is new and matching our hint bit - * filter. Wake up any process waiting for answer... - */ -static void irda_selective_discovery_indication(discinfo_t *discovery, - DISCOVERY_MODE mode, - void *priv) -{ - struct irda_sock *self; - - self = priv; - if (!self) { - net_warn_ratelimited("%s: lost myself!\n", __func__); - return; - } - - /* Pass parameter to the caller */ - self->cachedaddr = discovery->daddr; - - /* Wake up process if its waiting for device to be discovered */ - wake_up_interruptible(&self->query_wait); -} - -/* - * Function irda_discovery_timeout (priv) - * - * Timeout in the selective discovery process - * - * We were waiting for a node to be discovered, but nothing has come up - * so far. Wake up the user and tell him that we failed... - */ -static void irda_discovery_timeout(u_long priv) -{ - struct irda_sock *self; - - self = (struct irda_sock *) priv; - BUG_ON(self == NULL); - - /* Nothing for the caller */ - self->cachelog = NULL; - self->cachedaddr = 0; - self->errno = -ETIME; - - /* Wake up process if its still waiting... */ - wake_up_interruptible(&self->query_wait); -} - -/* - * Function irda_open_tsap (self) - * - * Open local Transport Service Access Point (TSAP) - * - */ -static int irda_open_tsap(struct irda_sock *self, __u8 tsap_sel, char *name) -{ - notify_t notify; - - if (self->tsap) { - pr_debug("%s: busy!\n", __func__); - return -EBUSY; - } - - /* Initialize callbacks to be used by the IrDA stack */ - irda_notify_init(¬ify); - notify.connect_confirm = irda_connect_confirm; - notify.connect_indication = irda_connect_indication; - notify.disconnect_indication = irda_disconnect_indication; - notify.data_indication = irda_data_indication; - notify.udata_indication = irda_data_indication; - notify.flow_indication = irda_flow_indication; - notify.instance = self; - strncpy(notify.name, name, NOTIFY_MAX_NAME); - - self->tsap = irttp_open_tsap(tsap_sel, DEFAULT_INITIAL_CREDIT, - ¬ify); - if (self->tsap == NULL) { - pr_debug("%s(), Unable to allocate TSAP!\n", - __func__); - return -ENOMEM; - } - /* Remember which TSAP selector we actually got */ - self->stsap_sel = self->tsap->stsap_sel; - - return 0; -} - -/* - * Function irda_open_lsap (self) - * - * Open local Link Service Access Point (LSAP). Used for opening Ultra - * sockets - */ -#ifdef CONFIG_IRDA_ULTRA -static int irda_open_lsap(struct irda_sock *self, int pid) -{ - notify_t notify; - - if (self->lsap) { - net_warn_ratelimited("%s(), busy!\n", __func__); - return -EBUSY; - } - - /* Initialize callbacks to be used by the IrDA stack */ - irda_notify_init(¬ify); - notify.udata_indication = irda_data_indication; - notify.instance = self; - strncpy(notify.name, "Ultra", NOTIFY_MAX_NAME); - - self->lsap = irlmp_open_lsap(LSAP_CONNLESS, ¬ify, pid); - if (self->lsap == NULL) { - pr_debug("%s(), Unable to allocate LSAP!\n", __func__); - return -ENOMEM; - } - - return 0; -} -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Function irda_find_lsap_sel (self, name) - * - * Try to lookup LSAP selector in remote LM-IAS - * - * Basically, we start a IAP query, and then go to sleep. When the query - * return, irda_getvalue_confirm will wake us up, and we can examine the - * result of the query... - * Note that in some case, the query fail even before we go to sleep, - * creating some races... - */ -static int irda_find_lsap_sel(struct irda_sock *self, char *name) -{ - pr_debug("%s(%p, %s)\n", __func__, self, name); - - if (self->iriap) { - net_warn_ratelimited("%s(): busy with a previous query\n", - __func__); - return -EBUSY; - } - - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - irda_getvalue_confirm); - if(self->iriap == NULL) - return -ENOMEM; - - /* Treat unexpected wakeup as disconnect */ - self->errno = -EHOSTUNREACH; - - /* Query remote LM-IAS */ - iriap_getvaluebyclass_request(self->iriap, self->saddr, self->daddr, - name, "IrDA:TinyTP:LsapSel"); - - /* Wait for answer, if not yet finished (or failed) */ - if (wait_event_interruptible(self->query_wait, (self->iriap==NULL))) - /* Treat signals as disconnect */ - return -EHOSTUNREACH; - - /* Check what happened */ - if (self->errno) - { - /* Requested object/attribute doesn't exist */ - if((self->errno == IAS_CLASS_UNKNOWN) || - (self->errno == IAS_ATTRIB_UNKNOWN)) - return -EADDRNOTAVAIL; - else - return -EHOSTUNREACH; - } - - /* Get the remote TSAP selector */ - switch (self->ias_result->type) { - case IAS_INTEGER: - pr_debug("%s() int=%d\n", - __func__, self->ias_result->t.integer); - - if (self->ias_result->t.integer != -1) - self->dtsap_sel = self->ias_result->t.integer; - else - self->dtsap_sel = 0; - break; - default: - self->dtsap_sel = 0; - pr_debug("%s(), bad type!\n", __func__); - break; - } - if (self->ias_result) - irias_delete_value(self->ias_result); - - if (self->dtsap_sel) - return 0; - - return -EADDRNOTAVAIL; -} - -/* - * Function irda_discover_daddr_and_lsap_sel (self, name) - * - * This try to find a device with the requested service. - * - * It basically look into the discovery log. For each address in the list, - * it queries the LM-IAS of the device to find if this device offer - * the requested service. - * If there is more than one node supporting the service, we complain - * to the user (it should move devices around). - * The, we set both the destination address and the lsap selector to point - * on the service on the unique device we have found. - * - * Note : this function fails if there is more than one device in range, - * because IrLMP doesn't disconnect the LAP when the last LSAP is closed. - * Moreover, we would need to wait the LAP disconnection... - */ -static int irda_discover_daddr_and_lsap_sel(struct irda_sock *self, char *name) -{ - discinfo_t *discoveries; /* Copy of the discovery log */ - int number; /* Number of nodes in the log */ - int i; - int err = -ENETUNREACH; - __u32 daddr = DEV_ADDR_ANY; /* Address we found the service on */ - __u8 dtsap_sel = 0x0; /* TSAP associated with it */ - - pr_debug("%s(), name=%s\n", __func__, name); - - /* Ask lmp for the current discovery log - * Note : we have to use irlmp_get_discoveries(), as opposed - * to play with the cachelog directly, because while we are - * making our ias query, le log might change... */ - discoveries = irlmp_get_discoveries(&number, self->mask.word, - self->nslots); - /* Check if the we got some results */ - if (discoveries == NULL) - return -ENETUNREACH; /* No nodes discovered */ - - /* - * Now, check all discovered devices (if any), and connect - * client only about the services that the client is - * interested in... - */ - for(i = 0; i < number; i++) { - /* Try the address in the log */ - self->daddr = discoveries[i].daddr; - self->saddr = 0x0; - pr_debug("%s(), trying daddr = %08x\n", - __func__, self->daddr); - - /* Query remote LM-IAS for this service */ - err = irda_find_lsap_sel(self, name); - switch (err) { - case 0: - /* We found the requested service */ - if(daddr != DEV_ADDR_ANY) { - pr_debug("%s(), discovered service ''%s'' in two different devices !!!\n", - __func__, name); - self->daddr = DEV_ADDR_ANY; - kfree(discoveries); - return -ENOTUNIQ; - } - /* First time we found that one, save it ! */ - daddr = self->daddr; - dtsap_sel = self->dtsap_sel; - break; - case -EADDRNOTAVAIL: - /* Requested service simply doesn't exist on this node */ - break; - default: - /* Something bad did happen :-( */ - pr_debug("%s(), unexpected IAS query failure\n", - __func__); - self->daddr = DEV_ADDR_ANY; - kfree(discoveries); - return -EHOSTUNREACH; - } - } - /* Cleanup our copy of the discovery log */ - kfree(discoveries); - - /* Check out what we found */ - if(daddr == DEV_ADDR_ANY) { - pr_debug("%s(), cannot discover service ''%s'' in any device !!!\n", - __func__, name); - self->daddr = DEV_ADDR_ANY; - return -EADDRNOTAVAIL; - } - - /* Revert back to discovered device & service */ - self->daddr = daddr; - self->saddr = 0x0; - self->dtsap_sel = dtsap_sel; - - pr_debug("%s(), discovered requested service ''%s'' at address %08x\n", - __func__, name, self->daddr); - - return 0; -} - -/* - * Function irda_getname (sock, uaddr, uaddr_len, peer) - * - * Return the our own, or peers socket address (sockaddr_irda) - * - */ -static int irda_getname(struct socket *sock, struct sockaddr *uaddr, - int *uaddr_len, int peer) -{ - struct sockaddr_irda saddr; - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - - memset(&saddr, 0, sizeof(saddr)); - if (peer) { - if (sk->sk_state != TCP_ESTABLISHED) - return -ENOTCONN; - - saddr.sir_family = AF_IRDA; - saddr.sir_lsap_sel = self->dtsap_sel; - saddr.sir_addr = self->daddr; - } else { - saddr.sir_family = AF_IRDA; - saddr.sir_lsap_sel = self->stsap_sel; - saddr.sir_addr = self->saddr; - } - - pr_debug("%s(), tsap_sel = %#x\n", __func__, saddr.sir_lsap_sel); - pr_debug("%s(), addr = %08x\n", __func__, saddr.sir_addr); - - /* uaddr_len come to us uninitialised */ - *uaddr_len = sizeof (struct sockaddr_irda); - memcpy(uaddr, &saddr, *uaddr_len); - - return 0; -} - -/* - * Function irda_listen (sock, backlog) - * - * Just move to the listen state - * - */ -static int irda_listen(struct socket *sock, int backlog) -{ - struct sock *sk = sock->sk; - int err = -EOPNOTSUPP; - - lock_sock(sk); - - if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) && - (sk->sk_type != SOCK_DGRAM)) - goto out; - - if (sk->sk_state != TCP_LISTEN) { - sk->sk_max_ack_backlog = backlog; - sk->sk_state = TCP_LISTEN; - - err = 0; - } -out: - release_sock(sk); - - return err; -} - -/* - * Function irda_bind (sock, uaddr, addr_len) - * - * Used by servers to register their well known TSAP - * - */ -static int irda_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) -{ - struct sock *sk = sock->sk; - struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr; - struct irda_sock *self = irda_sk(sk); - int err; - - pr_debug("%s(%p)\n", __func__, self); - - if (addr_len != sizeof(struct sockaddr_irda)) - return -EINVAL; - - lock_sock(sk); -#ifdef CONFIG_IRDA_ULTRA - /* Special care for Ultra sockets */ - if ((sk->sk_type == SOCK_DGRAM) && - (sk->sk_protocol == IRDAPROTO_ULTRA)) { - self->pid = addr->sir_lsap_sel; - err = -EOPNOTSUPP; - if (self->pid & 0x80) { - pr_debug("%s(), extension in PID not supp!\n", - __func__); - goto out; - } - err = irda_open_lsap(self, self->pid); - if (err < 0) - goto out; - - /* Pretend we are connected */ - sock->state = SS_CONNECTED; - sk->sk_state = TCP_ESTABLISHED; - err = 0; - - goto out; - } -#endif /* CONFIG_IRDA_ULTRA */ - - self->ias_obj = irias_new_object(addr->sir_name, jiffies); - err = -ENOMEM; - if (self->ias_obj == NULL) - goto out; - - err = irda_open_tsap(self, addr->sir_lsap_sel, addr->sir_name); - if (err < 0) { - irias_delete_object(self->ias_obj); - self->ias_obj = NULL; - goto out; - } - - /* Register with LM-IAS */ - irias_add_integer_attrib(self->ias_obj, "IrDA:TinyTP:LsapSel", - self->stsap_sel, IAS_KERNEL_ATTR); - irias_insert_object(self->ias_obj); - - err = 0; -out: - release_sock(sk); - return err; -} - -/* - * Function irda_accept (sock, newsock, flags) - * - * Wait for incoming connection - * - */ -static int irda_accept(struct socket *sock, struct socket *newsock, int flags, - bool kern) -{ - struct sock *sk = sock->sk; - struct irda_sock *new, *self = irda_sk(sk); - struct sock *newsk; - struct sk_buff *skb = NULL; - int err; - - err = irda_create(sock_net(sk), newsock, sk->sk_protocol, kern); - if (err) - return err; - - err = -EINVAL; - - lock_sock(sk); - if (sock->state != SS_UNCONNECTED) - goto out; - - err = -EOPNOTSUPP; - if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) && - (sk->sk_type != SOCK_DGRAM)) - goto out; - - err = -EINVAL; - if (sk->sk_state != TCP_LISTEN) - goto out; - - /* - * The read queue this time is holding sockets ready to use - * hooked into the SABM we saved - */ - - /* - * We can perform the accept only if there is incoming data - * on the listening socket. - * So, we will block the caller until we receive any data. - * If the caller was waiting on select() or poll() before - * calling us, the data is waiting for us ;-) - * Jean II - */ - while (1) { - skb = skb_dequeue(&sk->sk_receive_queue); - if (skb) - break; - - /* Non blocking operation */ - err = -EWOULDBLOCK; - if (flags & O_NONBLOCK) - goto out; - - err = wait_event_interruptible(*(sk_sleep(sk)), - skb_peek(&sk->sk_receive_queue)); - if (err) - goto out; - } - - newsk = newsock->sk; - err = -EIO; - if (newsk == NULL) - goto out; - - newsk->sk_state = TCP_ESTABLISHED; - - new = irda_sk(newsk); - - /* Now attach up the new socket */ - new->tsap = irttp_dup(self->tsap, new); - err = -EPERM; /* value does not seem to make sense. -arnd */ - if (!new->tsap) { - pr_debug("%s(), dup failed!\n", __func__); - goto out; - } - - new->stsap_sel = new->tsap->stsap_sel; - new->dtsap_sel = new->tsap->dtsap_sel; - new->saddr = irttp_get_saddr(new->tsap); - new->daddr = irttp_get_daddr(new->tsap); - - new->max_sdu_size_tx = self->max_sdu_size_tx; - new->max_sdu_size_rx = self->max_sdu_size_rx; - new->max_data_size = self->max_data_size; - new->max_header_size = self->max_header_size; - - memcpy(&new->qos_tx, &self->qos_tx, sizeof(struct qos_info)); - - /* Clean up the original one to keep it in listen state */ - irttp_listen(self->tsap); - - sk->sk_ack_backlog--; - - newsock->state = SS_CONNECTED; - - irda_connect_response(new); - err = 0; -out: - kfree_skb(skb); - release_sock(sk); - return err; -} - -/* - * Function irda_connect (sock, uaddr, addr_len, flags) - * - * Connect to a IrDA device - * - * The main difference with a "standard" connect is that with IrDA we need - * to resolve the service name into a TSAP selector (in TCP, port number - * doesn't have to be resolved). - * Because of this service name resolution, we can offer "auto-connect", - * where we connect to a service without specifying a destination address. - * - * Note : by consulting "errno", the user space caller may learn the cause - * of the failure. Most of them are visible in the function, others may come - * from subroutines called and are listed here : - * o EBUSY : already processing a connect - * o EHOSTUNREACH : bad addr->sir_addr argument - * o EADDRNOTAVAIL : bad addr->sir_name argument - * o ENOTUNIQ : more than one node has addr->sir_name (auto-connect) - * o ENETUNREACH : no node found on the network (auto-connect) - */ -static int irda_connect(struct socket *sock, struct sockaddr *uaddr, - int addr_len, int flags) -{ - struct sock *sk = sock->sk; - struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr; - struct irda_sock *self = irda_sk(sk); - int err; - - pr_debug("%s(%p)\n", __func__, self); - - lock_sock(sk); - /* Don't allow connect for Ultra sockets */ - err = -ESOCKTNOSUPPORT; - if ((sk->sk_type == SOCK_DGRAM) && (sk->sk_protocol == IRDAPROTO_ULTRA)) - goto out; - - if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) { - sock->state = SS_CONNECTED; - err = 0; - goto out; /* Connect completed during a ERESTARTSYS event */ - } - - if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) { - sock->state = SS_UNCONNECTED; - err = -ECONNREFUSED; - goto out; - } - - err = -EISCONN; /* No reconnect on a seqpacket socket */ - if (sk->sk_state == TCP_ESTABLISHED) - goto out; - - sk->sk_state = TCP_CLOSE; - sock->state = SS_UNCONNECTED; - - err = -EINVAL; - if (addr_len != sizeof(struct sockaddr_irda)) - goto out; - - /* Check if user supplied any destination device address */ - if ((!addr->sir_addr) || (addr->sir_addr == DEV_ADDR_ANY)) { - /* Try to find one suitable */ - err = irda_discover_daddr_and_lsap_sel(self, addr->sir_name); - if (err) { - pr_debug("%s(), auto-connect failed!\n", __func__); - goto out; - } - } else { - /* Use the one provided by the user */ - self->daddr = addr->sir_addr; - pr_debug("%s(), daddr = %08x\n", __func__, self->daddr); - - /* If we don't have a valid service name, we assume the - * user want to connect on a specific LSAP. Prevent - * the use of invalid LSAPs (IrLMP 1.1 p10). Jean II */ - if((addr->sir_name[0] != '\0') || - (addr->sir_lsap_sel >= 0x70)) { - /* Query remote LM-IAS using service name */ - err = irda_find_lsap_sel(self, addr->sir_name); - if (err) { - pr_debug("%s(), connect failed!\n", __func__); - goto out; - } - } else { - /* Directly connect to the remote LSAP - * specified by the sir_lsap field. - * Please use with caution, in IrDA LSAPs are - * dynamic and there is no "well-known" LSAP. */ - self->dtsap_sel = addr->sir_lsap_sel; - } - } - - /* Check if we have opened a local TSAP */ - if (!self->tsap) { - err = irda_open_tsap(self, LSAP_ANY, addr->sir_name); - if (err) - goto out; - } - - /* Move to connecting socket, start sending Connect Requests */ - sock->state = SS_CONNECTING; - sk->sk_state = TCP_SYN_SENT; - - /* Connect to remote device */ - err = irttp_connect_request(self->tsap, self->dtsap_sel, - self->saddr, self->daddr, NULL, - self->max_sdu_size_rx, NULL); - if (err) { - pr_debug("%s(), connect failed!\n", __func__); - goto out; - } - - /* Now the loop */ - err = -EINPROGRESS; - if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK)) - goto out; - - err = -ERESTARTSYS; - if (wait_event_interruptible(*(sk_sleep(sk)), - (sk->sk_state != TCP_SYN_SENT))) - goto out; - - if (sk->sk_state != TCP_ESTABLISHED) { - sock->state = SS_UNCONNECTED; - err = sock_error(sk); - if (!err) - err = -ECONNRESET; - goto out; - } - - sock->state = SS_CONNECTED; - - /* At this point, IrLMP has assigned our source address */ - self->saddr = irttp_get_saddr(self->tsap); - err = 0; -out: - release_sock(sk); - return err; -} - -static struct proto irda_proto = { - .name = "IRDA", - .owner = THIS_MODULE, - .obj_size = sizeof(struct irda_sock), -}; - -/* - * Function irda_create (sock, protocol) - * - * Create IrDA socket - * - */ -static int irda_create(struct net *net, struct socket *sock, int protocol, - int kern) -{ - struct sock *sk; - struct irda_sock *self; - - if (protocol < 0 || protocol > SK_PROTOCOL_MAX) - return -EINVAL; - - if (net != &init_net) - return -EAFNOSUPPORT; - - /* Check for valid socket type */ - switch (sock->type) { - case SOCK_STREAM: /* For TTP connections with SAR disabled */ - case SOCK_SEQPACKET: /* For TTP connections with SAR enabled */ - case SOCK_DGRAM: /* For TTP Unitdata or LMP Ultra transfers */ - break; - default: - return -ESOCKTNOSUPPORT; - } - - /* Allocate networking socket */ - sk = sk_alloc(net, PF_IRDA, GFP_KERNEL, &irda_proto, kern); - if (sk == NULL) - return -ENOMEM; - - self = irda_sk(sk); - pr_debug("%s() : self is %p\n", __func__, self); - - init_waitqueue_head(&self->query_wait); - - switch (sock->type) { - case SOCK_STREAM: - sock->ops = &irda_stream_ops; - self->max_sdu_size_rx = TTP_SAR_DISABLE; - break; - case SOCK_SEQPACKET: - sock->ops = &irda_seqpacket_ops; - self->max_sdu_size_rx = TTP_SAR_UNBOUND; - break; - case SOCK_DGRAM: - switch (protocol) { -#ifdef CONFIG_IRDA_ULTRA - case IRDAPROTO_ULTRA: - sock->ops = &irda_ultra_ops; - /* Initialise now, because we may send on unbound - * sockets. Jean II */ - self->max_data_size = ULTRA_MAX_DATA - LMP_PID_HEADER; - self->max_header_size = IRDA_MAX_HEADER + LMP_PID_HEADER; - break; -#endif /* CONFIG_IRDA_ULTRA */ - case IRDAPROTO_UNITDATA: - sock->ops = &irda_dgram_ops; - /* We let Unitdata conn. be like seqpack conn. */ - self->max_sdu_size_rx = TTP_SAR_UNBOUND; - break; - default: - sk_free(sk); - return -ESOCKTNOSUPPORT; - } - break; - default: - sk_free(sk); - return -ESOCKTNOSUPPORT; - } - - /* Initialise networking socket struct */ - sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */ - sk->sk_family = PF_IRDA; - sk->sk_protocol = protocol; - - /* Register as a client with IrLMP */ - self->ckey = irlmp_register_client(0, NULL, NULL, NULL); - self->mask.word = 0xffff; - self->rx_flow = self->tx_flow = FLOW_START; - self->nslots = DISCOVERY_DEFAULT_SLOTS; - self->daddr = DEV_ADDR_ANY; /* Until we get connected */ - self->saddr = 0x0; /* so IrLMP assign us any link */ - return 0; -} - -/* - * Function irda_destroy_socket (self) - * - * Destroy socket - * - */ -static void irda_destroy_socket(struct irda_sock *self) -{ - pr_debug("%s(%p)\n", __func__, self); - - /* Unregister with IrLMP */ - irlmp_unregister_client(self->ckey); - irlmp_unregister_service(self->skey); - - /* Unregister with LM-IAS */ - if (self->ias_obj) { - irias_delete_object(self->ias_obj); - self->ias_obj = NULL; - } - - if (self->iriap) { - iriap_close(self->iriap); - self->iriap = NULL; - } - - if (self->tsap) { - irttp_disconnect_request(self->tsap, NULL, P_NORMAL); - irttp_close_tsap(self->tsap); - self->tsap = NULL; - } -#ifdef CONFIG_IRDA_ULTRA - if (self->lsap) { - irlmp_close_lsap(self->lsap); - self->lsap = NULL; - } -#endif /* CONFIG_IRDA_ULTRA */ -} - -/* - * Function irda_release (sock) - */ -static int irda_release(struct socket *sock) -{ - struct sock *sk = sock->sk; - - if (sk == NULL) - return 0; - - lock_sock(sk); - sk->sk_state = TCP_CLOSE; - sk->sk_shutdown |= SEND_SHUTDOWN; - sk->sk_state_change(sk); - - /* Destroy IrDA socket */ - irda_destroy_socket(irda_sk(sk)); - - sock_orphan(sk); - sock->sk = NULL; - release_sock(sk); - - /* Purge queues (see sock_init_data()) */ - skb_queue_purge(&sk->sk_receive_queue); - - /* Destroy networking socket if we are the last reference on it, - * i.e. if(sk->sk_refcnt == 0) -> sk_free(sk) */ - sock_put(sk); - - /* Notes on socket locking and deallocation... - Jean II - * In theory we should put pairs of sock_hold() / sock_put() to - * prevent the socket to be destroyed whenever there is an - * outstanding request or outstanding incoming packet or event. - * - * 1) This may include IAS request, both in connect and getsockopt. - * Unfortunately, the situation is a bit more messy than it looks, - * because we close iriap and kfree(self) above. - * - * 2) This may include selective discovery in getsockopt. - * Same stuff as above, irlmp registration and self are gone. - * - * Probably 1 and 2 may not matter, because it's all triggered - * by a process and the socket layer already prevent the - * socket to go away while a process is holding it, through - * sockfd_put() and fput()... - * - * 3) This may include deferred TSAP closure. In particular, - * we may receive a late irda_disconnect_indication() - * Fortunately, (tsap_cb *)->close_pend should protect us - * from that. - * - * I did some testing on SMP, and it looks solid. And the socket - * memory leak is now gone... - Jean II - */ - - return 0; -} - -/* - * Function irda_sendmsg (sock, msg, len) - * - * Send message down to TinyTP. This function is used for both STREAM and - * SEQPACK services. This is possible since it forces the client to - * fragment the message if necessary - */ -static int irda_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) -{ - struct sock *sk = sock->sk; - struct irda_sock *self; - struct sk_buff *skb; - int err = -EPIPE; - - pr_debug("%s(), len=%zd\n", __func__, len); - - /* Note : socket.c set MSG_EOR on SEQPACKET sockets */ - if (msg->msg_flags & ~(MSG_DONTWAIT | MSG_EOR | MSG_CMSG_COMPAT | - MSG_NOSIGNAL)) { - return -EINVAL; - } - - lock_sock(sk); - - if (sk->sk_shutdown & SEND_SHUTDOWN) - goto out_err; - - if (sk->sk_state != TCP_ESTABLISHED) { - err = -ENOTCONN; - goto out; - } - - self = irda_sk(sk); - - /* Check if IrTTP is wants us to slow down */ - - if (wait_event_interruptible(*(sk_sleep(sk)), - (self->tx_flow != FLOW_STOP || sk->sk_state != TCP_ESTABLISHED))) { - err = -ERESTARTSYS; - goto out; - } - - /* Check if we are still connected */ - if (sk->sk_state != TCP_ESTABLISHED) { - err = -ENOTCONN; - goto out; - } - - /* Check that we don't send out too big frames */ - if (len > self->max_data_size) { - pr_debug("%s(), Chopping frame from %zd to %d bytes!\n", - __func__, len, self->max_data_size); - len = self->max_data_size; - } - - skb = sock_alloc_send_skb(sk, len + self->max_header_size + 16, - msg->msg_flags & MSG_DONTWAIT, &err); - if (!skb) - goto out_err; - - skb_reserve(skb, self->max_header_size + 16); - skb_reset_transport_header(skb); - skb_put(skb, len); - err = memcpy_from_msg(skb_transport_header(skb), msg, len); - if (err) { - kfree_skb(skb); - goto out_err; - } - - /* - * Just send the message to TinyTP, and let it deal with possible - * errors. No need to duplicate all that here - */ - err = irttp_data_request(self->tsap, skb); - if (err) { - pr_debug("%s(), err=%d\n", __func__, err); - goto out_err; - } - - release_sock(sk); - /* Tell client how much data we actually sent */ - return len; - -out_err: - err = sk_stream_error(sk, msg->msg_flags, err); -out: - release_sock(sk); - return err; - -} - -/* - * Function irda_recvmsg_dgram (sock, msg, size, flags) - * - * Try to receive message and copy it to user. The frame is discarded - * after being read, regardless of how much the user actually read - */ -static int irda_recvmsg_dgram(struct socket *sock, struct msghdr *msg, - size_t size, int flags) -{ - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - struct sk_buff *skb; - size_t copied; - int err; - - skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, - flags & MSG_DONTWAIT, &err); - if (!skb) - return err; - - skb_reset_transport_header(skb); - copied = skb->len; - - if (copied > size) { - pr_debug("%s(), Received truncated frame (%zd < %zd)!\n", - __func__, copied, size); - copied = size; - msg->msg_flags |= MSG_TRUNC; - } - skb_copy_datagram_msg(skb, 0, msg, copied); - - skb_free_datagram(sk, skb); - - /* - * Check if we have previously stopped IrTTP and we know - * have more free space in our rx_queue. If so tell IrTTP - * to start delivering frames again before our rx_queue gets - * empty - */ - if (self->rx_flow == FLOW_STOP) { - if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) { - pr_debug("%s(), Starting IrTTP\n", __func__); - self->rx_flow = FLOW_START; - irttp_flow_request(self->tsap, FLOW_START); - } - } - - return copied; -} - -/* - * Function irda_recvmsg_stream (sock, msg, size, flags) - */ -static int irda_recvmsg_stream(struct socket *sock, struct msghdr *msg, - size_t size, int flags) -{ - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - int noblock = flags & MSG_DONTWAIT; - size_t copied = 0; - int target, err; - long timeo; - - if ((err = sock_error(sk)) < 0) - return err; - - if (sock->flags & __SO_ACCEPTCON) - return -EINVAL; - - err =-EOPNOTSUPP; - if (flags & MSG_OOB) - return -EOPNOTSUPP; - - err = 0; - target = sock_rcvlowat(sk, flags & MSG_WAITALL, size); - timeo = sock_rcvtimeo(sk, noblock); - - do { - int chunk; - struct sk_buff *skb = skb_dequeue(&sk->sk_receive_queue); - - if (skb == NULL) { - DEFINE_WAIT(wait); - err = 0; - - if (copied >= target) - break; - - prepare_to_wait_exclusive(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); - - /* - * POSIX 1003.1g mandates this order. - */ - err = sock_error(sk); - if (err) - ; - else if (sk->sk_shutdown & RCV_SHUTDOWN) - ; - else if (noblock) - err = -EAGAIN; - else if (signal_pending(current)) - err = sock_intr_errno(timeo); - else if (sk->sk_state != TCP_ESTABLISHED) - err = -ENOTCONN; - else if (skb_peek(&sk->sk_receive_queue) == NULL) - /* Wait process until data arrives */ - schedule(); - - finish_wait(sk_sleep(sk), &wait); - - if (err) - return err; - if (sk->sk_shutdown & RCV_SHUTDOWN) - break; - - continue; - } - - chunk = min_t(unsigned int, skb->len, size); - if (memcpy_to_msg(msg, skb->data, chunk)) { - skb_queue_head(&sk->sk_receive_queue, skb); - if (copied == 0) - copied = -EFAULT; - break; - } - copied += chunk; - size -= chunk; - - /* Mark read part of skb as used */ - if (!(flags & MSG_PEEK)) { - skb_pull(skb, chunk); - - /* put the skb back if we didn't use it up.. */ - if (skb->len) { - pr_debug("%s(), back on q!\n", - __func__); - skb_queue_head(&sk->sk_receive_queue, skb); - break; - } - - kfree_skb(skb); - } else { - pr_debug("%s() questionable!?\n", __func__); - - /* put message back and return */ - skb_queue_head(&sk->sk_receive_queue, skb); - break; - } - } while (size); - - /* - * Check if we have previously stopped IrTTP and we know - * have more free space in our rx_queue. If so tell IrTTP - * to start delivering frames again before our rx_queue gets - * empty - */ - if (self->rx_flow == FLOW_STOP) { - if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) { - pr_debug("%s(), Starting IrTTP\n", __func__); - self->rx_flow = FLOW_START; - irttp_flow_request(self->tsap, FLOW_START); - } - } - - return copied; -} - -/* - * Function irda_sendmsg_dgram (sock, msg, len) - * - * Send message down to TinyTP for the unreliable sequenced - * packet service... - * - */ -static int irda_sendmsg_dgram(struct socket *sock, struct msghdr *msg, - size_t len) -{ - struct sock *sk = sock->sk; - struct irda_sock *self; - struct sk_buff *skb; - int err; - - pr_debug("%s(), len=%zd\n", __func__, len); - - if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT)) - return -EINVAL; - - lock_sock(sk); - - if (sk->sk_shutdown & SEND_SHUTDOWN) { - send_sig(SIGPIPE, current, 0); - err = -EPIPE; - goto out; - } - - err = -ENOTCONN; - if (sk->sk_state != TCP_ESTABLISHED) - goto out; - - self = irda_sk(sk); - - /* - * Check that we don't send out too big frames. This is an unreliable - * service, so we have no fragmentation and no coalescence - */ - if (len > self->max_data_size) { - pr_debug("%s(), Warning too much data! Chopping frame from %zd to %d bytes!\n", - __func__, len, self->max_data_size); - len = self->max_data_size; - } - - skb = sock_alloc_send_skb(sk, len + self->max_header_size, - msg->msg_flags & MSG_DONTWAIT, &err); - err = -ENOBUFS; - if (!skb) - goto out; - - skb_reserve(skb, self->max_header_size); - skb_reset_transport_header(skb); - - pr_debug("%s(), appending user data\n", __func__); - skb_put(skb, len); - err = memcpy_from_msg(skb_transport_header(skb), msg, len); - if (err) { - kfree_skb(skb); - goto out; - } - - /* - * Just send the message to TinyTP, and let it deal with possible - * errors. No need to duplicate all that here - */ - err = irttp_udata_request(self->tsap, skb); - if (err) { - pr_debug("%s(), err=%d\n", __func__, err); - goto out; - } - - release_sock(sk); - return len; - -out: - release_sock(sk); - return err; -} - -/* - * Function irda_sendmsg_ultra (sock, msg, len) - * - * Send message down to IrLMP for the unreliable Ultra - * packet service... - */ -#ifdef CONFIG_IRDA_ULTRA -static int irda_sendmsg_ultra(struct socket *sock, struct msghdr *msg, - size_t len) -{ - struct sock *sk = sock->sk; - struct irda_sock *self; - __u8 pid = 0; - int bound = 0; - struct sk_buff *skb; - int err; - - pr_debug("%s(), len=%zd\n", __func__, len); - - err = -EINVAL; - if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT)) - return -EINVAL; - - lock_sock(sk); - - err = -EPIPE; - if (sk->sk_shutdown & SEND_SHUTDOWN) { - send_sig(SIGPIPE, current, 0); - goto out; - } - - self = irda_sk(sk); - - /* Check if an address was specified with sendto. Jean II */ - if (msg->msg_name) { - DECLARE_SOCKADDR(struct sockaddr_irda *, addr, msg->msg_name); - err = -EINVAL; - /* Check address, extract pid. Jean II */ - if (msg->msg_namelen < sizeof(*addr)) - goto out; - if (addr->sir_family != AF_IRDA) - goto out; - - pid = addr->sir_lsap_sel; - if (pid & 0x80) { - pr_debug("%s(), extension in PID not supp!\n", - __func__); - err = -EOPNOTSUPP; - goto out; - } - } else { - /* Check that the socket is properly bound to an Ultra - * port. Jean II */ - if ((self->lsap == NULL) || - (sk->sk_state != TCP_ESTABLISHED)) { - pr_debug("%s(), socket not bound to Ultra PID.\n", - __func__); - err = -ENOTCONN; - goto out; - } - /* Use PID from socket */ - bound = 1; - } - - /* - * Check that we don't send out too big frames. This is an unreliable - * service, so we have no fragmentation and no coalescence - */ - if (len > self->max_data_size) { - pr_debug("%s(), Warning too much data! Chopping frame from %zd to %d bytes!\n", - __func__, len, self->max_data_size); - len = self->max_data_size; - } - - skb = sock_alloc_send_skb(sk, len + self->max_header_size, - msg->msg_flags & MSG_DONTWAIT, &err); - err = -ENOBUFS; - if (!skb) - goto out; - - skb_reserve(skb, self->max_header_size); - skb_reset_transport_header(skb); - - pr_debug("%s(), appending user data\n", __func__); - skb_put(skb, len); - err = memcpy_from_msg(skb_transport_header(skb), msg, len); - if (err) { - kfree_skb(skb); - goto out; - } - - err = irlmp_connless_data_request((bound ? self->lsap : NULL), - skb, pid); - if (err) - pr_debug("%s(), err=%d\n", __func__, err); -out: - release_sock(sk); - return err ? : len; -} -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Function irda_shutdown (sk, how) - */ -static int irda_shutdown(struct socket *sock, int how) -{ - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - - pr_debug("%s(%p)\n", __func__, self); - - lock_sock(sk); - - sk->sk_state = TCP_CLOSE; - sk->sk_shutdown |= SEND_SHUTDOWN; - sk->sk_state_change(sk); - - if (self->iriap) { - iriap_close(self->iriap); - self->iriap = NULL; - } - - if (self->tsap) { - irttp_disconnect_request(self->tsap, NULL, P_NORMAL); - irttp_close_tsap(self->tsap); - self->tsap = NULL; - } - - /* A few cleanup so the socket look as good as new... */ - self->rx_flow = self->tx_flow = FLOW_START; /* needed ??? */ - self->daddr = DEV_ADDR_ANY; /* Until we get re-connected */ - self->saddr = 0x0; /* so IrLMP assign us any link */ - - release_sock(sk); - - return 0; -} - -/* - * Function irda_poll (file, sock, wait) - */ -static unsigned int irda_poll(struct file * file, struct socket *sock, - poll_table *wait) -{ - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - unsigned int mask; - - poll_wait(file, sk_sleep(sk), wait); - mask = 0; - - /* Exceptional events? */ - if (sk->sk_err) - mask |= POLLERR; - if (sk->sk_shutdown & RCV_SHUTDOWN) { - pr_debug("%s(), POLLHUP\n", __func__); - mask |= POLLHUP; - } - - /* Readable? */ - if (!skb_queue_empty(&sk->sk_receive_queue)) { - pr_debug("Socket is readable\n"); - mask |= POLLIN | POLLRDNORM; - } - - /* Connection-based need to check for termination and startup */ - switch (sk->sk_type) { - case SOCK_STREAM: - if (sk->sk_state == TCP_CLOSE) { - pr_debug("%s(), POLLHUP\n", __func__); - mask |= POLLHUP; - } - - if (sk->sk_state == TCP_ESTABLISHED) { - if ((self->tx_flow == FLOW_START) && - sock_writeable(sk)) - { - mask |= POLLOUT | POLLWRNORM | POLLWRBAND; - } - } - break; - case SOCK_SEQPACKET: - if ((self->tx_flow == FLOW_START) && - sock_writeable(sk)) - { - mask |= POLLOUT | POLLWRNORM | POLLWRBAND; - } - break; - case SOCK_DGRAM: - if (sock_writeable(sk)) - mask |= POLLOUT | POLLWRNORM | POLLWRBAND; - break; - default: - break; - } - - return mask; -} - -/* - * Function irda_ioctl (sock, cmd, arg) - */ -static int irda_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) -{ - struct sock *sk = sock->sk; - int err; - - pr_debug("%s(), cmd=%#x\n", __func__, cmd); - - err = -EINVAL; - switch (cmd) { - case TIOCOUTQ: { - long amount; - - amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk); - if (amount < 0) - amount = 0; - err = put_user(amount, (unsigned int __user *)arg); - break; - } - - case TIOCINQ: { - struct sk_buff *skb; - long amount = 0L; - /* These two are safe on a single CPU system as only user tasks fiddle here */ - if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL) - amount = skb->len; - err = put_user(amount, (unsigned int __user *)arg); - break; - } - - case SIOCGSTAMP: - if (sk != NULL) - err = sock_get_timestamp(sk, (struct timeval __user *)arg); - break; - - case SIOCGIFADDR: - case SIOCSIFADDR: - case SIOCGIFDSTADDR: - case SIOCSIFDSTADDR: - case SIOCGIFBRDADDR: - case SIOCSIFBRDADDR: - case SIOCGIFNETMASK: - case SIOCSIFNETMASK: - case SIOCGIFMETRIC: - case SIOCSIFMETRIC: - break; - default: - pr_debug("%s(), doing device ioctl!\n", __func__); - err = -ENOIOCTLCMD; - } - - return err; -} - -#ifdef CONFIG_COMPAT -/* - * Function irda_ioctl (sock, cmd, arg) - */ -static int irda_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) -{ - /* - * All IRDA's ioctl are standard ones. - */ - return -ENOIOCTLCMD; -} -#endif - -/* - * Function irda_setsockopt (sock, level, optname, optval, optlen) - * - * Set some options for the socket - * - */ -static int irda_setsockopt(struct socket *sock, int level, int optname, - char __user *optval, unsigned int optlen) -{ - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - struct irda_ias_set *ias_opt; - struct ias_object *ias_obj; - struct ias_attrib * ias_attr; /* Attribute in IAS object */ - int opt, free_ias = 0, err = 0; - - pr_debug("%s(%p)\n", __func__, self); - - if (level != SOL_IRLMP) - return -ENOPROTOOPT; - - lock_sock(sk); - - switch (optname) { - case IRLMP_IAS_SET: - /* The user want to add an attribute to an existing IAS object - * (in the IAS database) or to create a new object with this - * attribute. - * We first query IAS to know if the object exist, and then - * create the right attribute... - */ - - if (optlen != sizeof(struct irda_ias_set)) { - err = -EINVAL; - goto out; - } - - /* Copy query to the driver. */ - ias_opt = memdup_user(optval, optlen); - if (IS_ERR(ias_opt)) { - err = PTR_ERR(ias_opt); - goto out; - } - - /* Find the object we target. - * If the user gives us an empty string, we use the object - * associated with this socket. This will workaround - * duplicated class name - Jean II */ - if(ias_opt->irda_class_name[0] == '\0') { - if(self->ias_obj == NULL) { - kfree(ias_opt); - err = -EINVAL; - goto out; - } - ias_obj = self->ias_obj; - } else - ias_obj = irias_find_object(ias_opt->irda_class_name); - - /* Only ROOT can mess with the global IAS database. - * Users can only add attributes to the object associated - * with the socket they own - Jean II */ - if((!capable(CAP_NET_ADMIN)) && - ((ias_obj == NULL) || (ias_obj != self->ias_obj))) { - kfree(ias_opt); - err = -EPERM; - goto out; - } - - /* If the object doesn't exist, create it */ - if(ias_obj == (struct ias_object *) NULL) { - /* Create a new object */ - ias_obj = irias_new_object(ias_opt->irda_class_name, - jiffies); - if (ias_obj == NULL) { - kfree(ias_opt); - err = -ENOMEM; - goto out; - } - free_ias = 1; - } - - /* Do we have the attribute already ? */ - if(irias_find_attrib(ias_obj, ias_opt->irda_attrib_name)) { - kfree(ias_opt); - if (free_ias) { - kfree(ias_obj->name); - kfree(ias_obj); - } - err = -EINVAL; - goto out; - } - - /* Look at the type */ - switch(ias_opt->irda_attrib_type) { - case IAS_INTEGER: - /* Add an integer attribute */ - irias_add_integer_attrib( - ias_obj, - ias_opt->irda_attrib_name, - ias_opt->attribute.irda_attrib_int, - IAS_USER_ATTR); - break; - case IAS_OCT_SEQ: - /* Check length */ - if(ias_opt->attribute.irda_attrib_octet_seq.len > - IAS_MAX_OCTET_STRING) { - kfree(ias_opt); - if (free_ias) { - kfree(ias_obj->name); - kfree(ias_obj); - } - - err = -EINVAL; - goto out; - } - /* Add an octet sequence attribute */ - irias_add_octseq_attrib( - ias_obj, - ias_opt->irda_attrib_name, - ias_opt->attribute.irda_attrib_octet_seq.octet_seq, - ias_opt->attribute.irda_attrib_octet_seq.len, - IAS_USER_ATTR); - break; - case IAS_STRING: - /* Should check charset & co */ - /* Check length */ - /* The length is encoded in a __u8, and - * IAS_MAX_STRING == 256, so there is no way - * userspace can pass us a string too large. - * Jean II */ - /* NULL terminate the string (avoid troubles) */ - ias_opt->attribute.irda_attrib_string.string[ias_opt->attribute.irda_attrib_string.len] = '\0'; - /* Add a string attribute */ - irias_add_string_attrib( - ias_obj, - ias_opt->irda_attrib_name, - ias_opt->attribute.irda_attrib_string.string, - IAS_USER_ATTR); - break; - default : - kfree(ias_opt); - if (free_ias) { - kfree(ias_obj->name); - kfree(ias_obj); - } - err = -EINVAL; - goto out; - } - irias_insert_object(ias_obj); - kfree(ias_opt); - break; - case IRLMP_IAS_DEL: - /* The user want to delete an object from our local IAS - * database. We just need to query the IAS, check is the - * object is not owned by the kernel and delete it. - */ - - if (optlen != sizeof(struct irda_ias_set)) { - err = -EINVAL; - goto out; - } - - /* Copy query to the driver. */ - ias_opt = memdup_user(optval, optlen); - if (IS_ERR(ias_opt)) { - err = PTR_ERR(ias_opt); - goto out; - } - - /* Find the object we target. - * If the user gives us an empty string, we use the object - * associated with this socket. This will workaround - * duplicated class name - Jean II */ - if(ias_opt->irda_class_name[0] == '\0') - ias_obj = self->ias_obj; - else - ias_obj = irias_find_object(ias_opt->irda_class_name); - if(ias_obj == (struct ias_object *) NULL) { - kfree(ias_opt); - err = -EINVAL; - goto out; - } - - /* Only ROOT can mess with the global IAS database. - * Users can only del attributes from the object associated - * with the socket they own - Jean II */ - if((!capable(CAP_NET_ADMIN)) && - ((ias_obj == NULL) || (ias_obj != self->ias_obj))) { - kfree(ias_opt); - err = -EPERM; - goto out; - } - - /* Find the attribute (in the object) we target */ - ias_attr = irias_find_attrib(ias_obj, - ias_opt->irda_attrib_name); - if(ias_attr == (struct ias_attrib *) NULL) { - kfree(ias_opt); - err = -EINVAL; - goto out; - } - - /* Check is the user space own the object */ - if(ias_attr->value->owner != IAS_USER_ATTR) { - pr_debug("%s(), attempting to delete a kernel attribute\n", - __func__); - kfree(ias_opt); - err = -EPERM; - goto out; - } - - /* Remove the attribute (and maybe the object) */ - irias_delete_attrib(ias_obj, ias_attr, 1); - kfree(ias_opt); - break; - case IRLMP_MAX_SDU_SIZE: - if (optlen < sizeof(int)) { - err = -EINVAL; - goto out; - } - - if (get_user(opt, (int __user *)optval)) { - err = -EFAULT; - goto out; - } - - /* Only possible for a seqpacket service (TTP with SAR) */ - if (sk->sk_type != SOCK_SEQPACKET) { - pr_debug("%s(), setting max_sdu_size = %d\n", - __func__, opt); - self->max_sdu_size_rx = opt; - } else { - net_warn_ratelimited("%s: not allowed to set MAXSDUSIZE for this socket type!\n", - __func__); - err = -ENOPROTOOPT; - goto out; - } - break; - case IRLMP_HINTS_SET: - if (optlen < sizeof(int)) { - err = -EINVAL; - goto out; - } - - /* The input is really a (__u8 hints[2]), easier as an int */ - if (get_user(opt, (int __user *)optval)) { - err = -EFAULT; - goto out; - } - - /* Unregister any old registration */ - irlmp_unregister_service(self->skey); - - self->skey = irlmp_register_service((__u16) opt); - break; - case IRLMP_HINT_MASK_SET: - /* As opposed to the previous case which set the hint bits - * that we advertise, this one set the filter we use when - * making a discovery (nodes which don't match any hint - * bit in the mask are not reported). - */ - if (optlen < sizeof(int)) { - err = -EINVAL; - goto out; - } - - /* The input is really a (__u8 hints[2]), easier as an int */ - if (get_user(opt, (int __user *)optval)) { - err = -EFAULT; - goto out; - } - - /* Set the new hint mask */ - self->mask.word = (__u16) opt; - /* Mask out extension bits */ - self->mask.word &= 0x7f7f; - /* Check if no bits */ - if(!self->mask.word) - self->mask.word = 0xFFFF; - - break; - default: - err = -ENOPROTOOPT; - break; - } - -out: - release_sock(sk); - - return err; -} - -/* - * Function irda_extract_ias_value(ias_opt, ias_value) - * - * Translate internal IAS value structure to the user space representation - * - * The external representation of IAS values, as we exchange them with - * user space program is quite different from the internal representation, - * as stored in the IAS database (because we need a flat structure for - * crossing kernel boundary). - * This function transform the former in the latter. We also check - * that the value type is valid. - */ -static int irda_extract_ias_value(struct irda_ias_set *ias_opt, - struct ias_value *ias_value) -{ - /* Look at the type */ - switch (ias_value->type) { - case IAS_INTEGER: - /* Copy the integer */ - ias_opt->attribute.irda_attrib_int = ias_value->t.integer; - break; - case IAS_OCT_SEQ: - /* Set length */ - ias_opt->attribute.irda_attrib_octet_seq.len = ias_value->len; - /* Copy over */ - memcpy(ias_opt->attribute.irda_attrib_octet_seq.octet_seq, - ias_value->t.oct_seq, ias_value->len); - break; - case IAS_STRING: - /* Set length */ - ias_opt->attribute.irda_attrib_string.len = ias_value->len; - ias_opt->attribute.irda_attrib_string.charset = ias_value->charset; - /* Copy over */ - memcpy(ias_opt->attribute.irda_attrib_string.string, - ias_value->t.string, ias_value->len); - /* NULL terminate the string (avoid troubles) */ - ias_opt->attribute.irda_attrib_string.string[ias_value->len] = '\0'; - break; - case IAS_MISSING: - default : - return -EINVAL; - } - - /* Copy type over */ - ias_opt->irda_attrib_type = ias_value->type; - - return 0; -} - -/* - * Function irda_getsockopt (sock, level, optname, optval, optlen) - */ -static int irda_getsockopt(struct socket *sock, int level, int optname, - char __user *optval, int __user *optlen) -{ - struct sock *sk = sock->sk; - struct irda_sock *self = irda_sk(sk); - struct irda_device_list list = { 0 }; - struct irda_device_info *discoveries; - struct irda_ias_set * ias_opt; /* IAS get/query params */ - struct ias_object * ias_obj; /* Object in IAS */ - struct ias_attrib * ias_attr; /* Attribute in IAS object */ - int daddr = DEV_ADDR_ANY; /* Dest address for IAS queries */ - int val = 0; - int len = 0; - int err = 0; - int offset, total; - - pr_debug("%s(%p)\n", __func__, self); - - if (level != SOL_IRLMP) - return -ENOPROTOOPT; - - if (get_user(len, optlen)) - return -EFAULT; - - if(len < 0) - return -EINVAL; - - lock_sock(sk); - - switch (optname) { - case IRLMP_ENUMDEVICES: - - /* Offset to first device entry */ - offset = sizeof(struct irda_device_list) - - sizeof(struct irda_device_info); - - if (len < offset) { - err = -EINVAL; - goto out; - } - - /* Ask lmp for the current discovery log */ - discoveries = irlmp_get_discoveries(&list.len, self->mask.word, - self->nslots); - /* Check if the we got some results */ - if (discoveries == NULL) { - err = -EAGAIN; - goto out; /* Didn't find any devices */ - } - - /* Write total list length back to client */ - if (copy_to_user(optval, &list, offset)) - err = -EFAULT; - - /* Copy the list itself - watch for overflow */ - if (list.len > 2048) { - err = -EINVAL; - goto bed; - } - total = offset + (list.len * sizeof(struct irda_device_info)); - if (total > len) - total = len; - if (copy_to_user(optval+offset, discoveries, total - offset)) - err = -EFAULT; - - /* Write total number of bytes used back to client */ - if (put_user(total, optlen)) - err = -EFAULT; -bed: - /* Free up our buffer */ - kfree(discoveries); - break; - case IRLMP_MAX_SDU_SIZE: - val = self->max_data_size; - len = sizeof(int); - if (put_user(len, optlen)) { - err = -EFAULT; - goto out; - } - - if (copy_to_user(optval, &val, len)) { - err = -EFAULT; - goto out; - } - - break; - case IRLMP_IAS_GET: - /* The user want an object from our local IAS database. - * We just need to query the IAS and return the value - * that we found */ - - /* Check that the user has allocated the right space for us */ - if (len != sizeof(struct irda_ias_set)) { - err = -EINVAL; - goto out; - } - - /* Copy query to the driver. */ - ias_opt = memdup_user(optval, len); - if (IS_ERR(ias_opt)) { - err = PTR_ERR(ias_opt); - goto out; - } - - /* Find the object we target. - * If the user gives us an empty string, we use the object - * associated with this socket. This will workaround - * duplicated class name - Jean II */ - if(ias_opt->irda_class_name[0] == '\0') - ias_obj = self->ias_obj; - else - ias_obj = irias_find_object(ias_opt->irda_class_name); - if(ias_obj == (struct ias_object *) NULL) { - kfree(ias_opt); - err = -EINVAL; - goto out; - } - - /* Find the attribute (in the object) we target */ - ias_attr = irias_find_attrib(ias_obj, - ias_opt->irda_attrib_name); - if(ias_attr == (struct ias_attrib *) NULL) { - kfree(ias_opt); - err = -EINVAL; - goto out; - } - - /* Translate from internal to user structure */ - err = irda_extract_ias_value(ias_opt, ias_attr->value); - if(err) { - kfree(ias_opt); - goto out; - } - - /* Copy reply to the user */ - if (copy_to_user(optval, ias_opt, - sizeof(struct irda_ias_set))) { - kfree(ias_opt); - err = -EFAULT; - goto out; - } - /* Note : don't need to put optlen, we checked it */ - kfree(ias_opt); - break; - case IRLMP_IAS_QUERY: - /* The user want an object from a remote IAS database. - * We need to use IAP to query the remote database and - * then wait for the answer to come back. */ - - /* Check that the user has allocated the right space for us */ - if (len != sizeof(struct irda_ias_set)) { - err = -EINVAL; - goto out; - } - - /* Copy query to the driver. */ - ias_opt = memdup_user(optval, len); - if (IS_ERR(ias_opt)) { - err = PTR_ERR(ias_opt); - goto out; - } - - /* At this point, there are two cases... - * 1) the socket is connected - that's the easy case, we - * just query the device we are connected to... - * 2) the socket is not connected - the user doesn't want - * to connect and/or may not have a valid service name - * (so can't create a fake connection). In this case, - * we assume that the user pass us a valid destination - * address in the requesting structure... - */ - if(self->daddr != DEV_ADDR_ANY) { - /* We are connected - reuse known daddr */ - daddr = self->daddr; - } else { - /* We are not connected, we must specify a valid - * destination address */ - daddr = ias_opt->daddr; - if((!daddr) || (daddr == DEV_ADDR_ANY)) { - kfree(ias_opt); - err = -EINVAL; - goto out; - } - } - - /* Check that we can proceed with IAP */ - if (self->iriap) { - net_warn_ratelimited("%s: busy with a previous query\n", - __func__); - kfree(ias_opt); - err = -EBUSY; - goto out; - } - - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - irda_getvalue_confirm); - - if (self->iriap == NULL) { - kfree(ias_opt); - err = -ENOMEM; - goto out; - } - - /* Treat unexpected wakeup as disconnect */ - self->errno = -EHOSTUNREACH; - - /* Query remote LM-IAS */ - iriap_getvaluebyclass_request(self->iriap, - self->saddr, daddr, - ias_opt->irda_class_name, - ias_opt->irda_attrib_name); - - /* Wait for answer, if not yet finished (or failed) */ - if (wait_event_interruptible(self->query_wait, - (self->iriap == NULL))) { - /* pending request uses copy of ias_opt-content - * we can free it regardless! */ - kfree(ias_opt); - /* Treat signals as disconnect */ - err = -EHOSTUNREACH; - goto out; - } - - /* Check what happened */ - if (self->errno) - { - kfree(ias_opt); - /* Requested object/attribute doesn't exist */ - if((self->errno == IAS_CLASS_UNKNOWN) || - (self->errno == IAS_ATTRIB_UNKNOWN)) - err = -EADDRNOTAVAIL; - else - err = -EHOSTUNREACH; - - goto out; - } - - /* Translate from internal to user structure */ - err = irda_extract_ias_value(ias_opt, self->ias_result); - if (self->ias_result) - irias_delete_value(self->ias_result); - if (err) { - kfree(ias_opt); - goto out; - } - - /* Copy reply to the user */ - if (copy_to_user(optval, ias_opt, - sizeof(struct irda_ias_set))) { - kfree(ias_opt); - err = -EFAULT; - goto out; - } - /* Note : don't need to put optlen, we checked it */ - kfree(ias_opt); - break; - case IRLMP_WAITDEVICE: - /* This function is just another way of seeing life ;-) - * IRLMP_ENUMDEVICES assumes that you have a static network, - * and that you just want to pick one of the devices present. - * On the other hand, in here we assume that no device is - * present and that at some point in the future a device will - * come into range. When this device arrive, we just wake - * up the caller, so that he has time to connect to it before - * the device goes away... - * Note : once the node has been discovered for more than a - * few second, it won't trigger this function, unless it - * goes away and come back changes its hint bits (so we - * might call it IRLMP_WAITNEWDEVICE). - */ - - /* Check that the user is passing us an int */ - if (len != sizeof(int)) { - err = -EINVAL; - goto out; - } - /* Get timeout in ms (max time we block the caller) */ - if (get_user(val, (int __user *)optval)) { - err = -EFAULT; - goto out; - } - - /* Tell IrLMP we want to be notified */ - irlmp_update_client(self->ckey, self->mask.word, - irda_selective_discovery_indication, - NULL, (void *) self); - - /* Do some discovery (and also return cached results) */ - irlmp_discovery_request(self->nslots); - - /* Wait until a node is discovered */ - if (!self->cachedaddr) { - pr_debug("%s(), nothing discovered yet, going to sleep...\n", - __func__); - - /* Set watchdog timer to expire in <val> ms. */ - self->errno = 0; - setup_timer(&self->watchdog, irda_discovery_timeout, - (unsigned long)self); - mod_timer(&self->watchdog, - jiffies + msecs_to_jiffies(val)); - - /* Wait for IR-LMP to call us back */ - err = __wait_event_interruptible(self->query_wait, - (self->cachedaddr != 0 || self->errno == -ETIME)); - - /* If watchdog is still activated, kill it! */ - del_timer(&(self->watchdog)); - - pr_debug("%s(), ...waking up !\n", __func__); - - if (err != 0) - goto out; - } - else - pr_debug("%s(), found immediately !\n", - __func__); - - /* Tell IrLMP that we have been notified */ - irlmp_update_client(self->ckey, self->mask.word, - NULL, NULL, NULL); - - /* Check if the we got some results */ - if (!self->cachedaddr) { - err = -EAGAIN; /* Didn't find any devices */ - goto out; - } - daddr = self->cachedaddr; - /* Cleanup */ - self->cachedaddr = 0; - - /* We return the daddr of the device that trigger the - * wakeup. As irlmp pass us only the new devices, we - * are sure that it's not an old device. - * If the user want more details, he should query - * the whole discovery log and pick one device... - */ - if (put_user(daddr, (int __user *)optval)) { - err = -EFAULT; - goto out; - } - - break; - default: - err = -ENOPROTOOPT; - } - -out: - - release_sock(sk); - - return err; -} - -static const struct net_proto_family irda_family_ops = { - .family = PF_IRDA, - .create = irda_create, - .owner = THIS_MODULE, -}; - -static const struct proto_ops irda_stream_ops = { - .family = PF_IRDA, - .owner = THIS_MODULE, - .release = irda_release, - .bind = irda_bind, - .connect = irda_connect, - .socketpair = sock_no_socketpair, - .accept = irda_accept, - .getname = irda_getname, - .poll = irda_poll, - .ioctl = irda_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = irda_compat_ioctl, -#endif - .listen = irda_listen, - .shutdown = irda_shutdown, - .setsockopt = irda_setsockopt, - .getsockopt = irda_getsockopt, - .sendmsg = irda_sendmsg, - .recvmsg = irda_recvmsg_stream, - .mmap = sock_no_mmap, - .sendpage = sock_no_sendpage, -}; - -static const struct proto_ops irda_seqpacket_ops = { - .family = PF_IRDA, - .owner = THIS_MODULE, - .release = irda_release, - .bind = irda_bind, - .connect = irda_connect, - .socketpair = sock_no_socketpair, - .accept = irda_accept, - .getname = irda_getname, - .poll = datagram_poll, - .ioctl = irda_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = irda_compat_ioctl, -#endif - .listen = irda_listen, - .shutdown = irda_shutdown, - .setsockopt = irda_setsockopt, - .getsockopt = irda_getsockopt, - .sendmsg = irda_sendmsg, - .recvmsg = irda_recvmsg_dgram, - .mmap = sock_no_mmap, - .sendpage = sock_no_sendpage, -}; - -static const struct proto_ops irda_dgram_ops = { - .family = PF_IRDA, - .owner = THIS_MODULE, - .release = irda_release, - .bind = irda_bind, - .connect = irda_connect, - .socketpair = sock_no_socketpair, - .accept = irda_accept, - .getname = irda_getname, - .poll = datagram_poll, - .ioctl = irda_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = irda_compat_ioctl, -#endif - .listen = irda_listen, - .shutdown = irda_shutdown, - .setsockopt = irda_setsockopt, - .getsockopt = irda_getsockopt, - .sendmsg = irda_sendmsg_dgram, - .recvmsg = irda_recvmsg_dgram, - .mmap = sock_no_mmap, - .sendpage = sock_no_sendpage, -}; - -#ifdef CONFIG_IRDA_ULTRA -static const struct proto_ops irda_ultra_ops = { - .family = PF_IRDA, - .owner = THIS_MODULE, - .release = irda_release, - .bind = irda_bind, - .connect = sock_no_connect, - .socketpair = sock_no_socketpair, - .accept = sock_no_accept, - .getname = irda_getname, - .poll = datagram_poll, - .ioctl = irda_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = irda_compat_ioctl, -#endif - .listen = sock_no_listen, - .shutdown = irda_shutdown, - .setsockopt = irda_setsockopt, - .getsockopt = irda_getsockopt, - .sendmsg = irda_sendmsg_ultra, - .recvmsg = irda_recvmsg_dgram, - .mmap = sock_no_mmap, - .sendpage = sock_no_sendpage, -}; -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Function irsock_init (pro) - * - * Initialize IrDA protocol - * - */ -int __init irsock_init(void) -{ - int rc = proto_register(&irda_proto, 0); - - if (rc == 0) - rc = sock_register(&irda_family_ops); - - return rc; -} - -/* - * Function irsock_cleanup (void) - * - * Remove IrDA protocol - * - */ -void irsock_cleanup(void) -{ - sock_unregister(PF_IRDA); - proto_unregister(&irda_proto); -} diff --git a/net/irda/discovery.c b/net/irda/discovery.c deleted file mode 100644 index 364d70aed068..000000000000 --- a/net/irda/discovery.c +++ /dev/null @@ -1,417 +0,0 @@ -/********************************************************************* - * - * Filename: discovery.c - * Version: 0.1 - * Description: Routines for handling discoveries at the IrLMP layer - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Tue Apr 6 15:33:50 1999 - * Modified at: Sat Oct 9 17:11:31 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Modified at: Fri May 28 3:11 CST 1999 - * Modified by: Horst von Brand <vonbrand@sleipnir.valparaiso.cl> - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/string.h> -#include <linux/socket.h> -#include <linux/fs.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include <net/irda/irda.h> -#include <net/irda/irlmp.h> - -#include <net/irda/discovery.h> - -#include <asm/unaligned.h> - -/* - * Function irlmp_add_discovery (cachelog, discovery) - * - * Add a new discovery to the cachelog, and remove any old discoveries - * from the same device - * - * Note : we try to preserve the time this device was *first* discovered - * (as opposed to the time of last discovery used for cleanup). This is - * used by clients waiting for discovery events to tell if the device - * discovered is "new" or just the same old one. They can't rely there - * on a binary flag (new/old), because not all discovery events are - * propagated to them, and they might not always listen, so they would - * miss some new devices popping up... - * Jean II - */ -void irlmp_add_discovery(hashbin_t *cachelog, discovery_t *new) -{ - discovery_t *discovery, *node; - unsigned long flags; - - /* Set time of first discovery if node is new (see below) */ - new->firststamp = new->timestamp; - - spin_lock_irqsave(&cachelog->hb_spinlock, flags); - - /* - * Remove all discoveries of devices that has previously been - * discovered on the same link with the same name (info), or the - * same daddr. We do this since some devices (mostly PDAs) change - * their device address between every discovery. - */ - discovery = (discovery_t *) hashbin_get_first(cachelog); - while (discovery != NULL ) { - node = discovery; - - /* Be sure to stay one item ahead */ - discovery = (discovery_t *) hashbin_get_next(cachelog); - - if ((node->data.saddr == new->data.saddr) && - ((node->data.daddr == new->data.daddr) || - (strcmp(node->data.info, new->data.info) == 0))) - { - /* This discovery is a previous discovery - * from the same device, so just remove it - */ - hashbin_remove_this(cachelog, (irda_queue_t *) node); - /* Check if hints bits are unchanged */ - if (get_unaligned((__u16 *)node->data.hints) == get_unaligned((__u16 *)new->data.hints)) - /* Set time of first discovery for this node */ - new->firststamp = node->firststamp; - kfree(node); - } - } - - /* Insert the new and updated version */ - hashbin_insert(cachelog, (irda_queue_t *) new, new->data.daddr, NULL); - - spin_unlock_irqrestore(&cachelog->hb_spinlock, flags); -} - -/* - * Function irlmp_add_discovery_log (cachelog, log) - * - * Merge a disovery log into the cachelog. - * - */ -void irlmp_add_discovery_log(hashbin_t *cachelog, hashbin_t *log) -{ - discovery_t *discovery; - - /* - * If log is missing this means that IrLAP was unable to perform the - * discovery, so restart discovery again with just the half timeout - * of the normal one. - */ - /* Well... It means that there was nobody out there - Jean II */ - if (log == NULL) { - /* irlmp_start_discovery_timer(irlmp, 150); */ - return; - } - - /* - * Locking : we are the only owner of this discovery log, so - * no need to lock it. - * We just need to lock the global log in irlmp_add_discovery(). - */ - discovery = (discovery_t *) hashbin_remove_first(log); - while (discovery != NULL) { - irlmp_add_discovery(cachelog, discovery); - - discovery = (discovery_t *) hashbin_remove_first(log); - } - - /* Delete the now empty log */ - hashbin_delete(log, (FREE_FUNC) kfree); -} - -/* - * Function irlmp_expire_discoveries (log, saddr, force) - * - * Go through all discoveries and expire all that has stayed too long - * - * Note : this assume that IrLAP won't change its saddr, which - * currently is a valid assumption... - */ -void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force) -{ - discovery_t * discovery; - discovery_t * curr; - unsigned long flags; - discinfo_t * buffer = NULL; - int n; /* Size of the full log */ - int i = 0; /* How many we expired */ - - IRDA_ASSERT(log != NULL, return;); - spin_lock_irqsave(&log->hb_spinlock, flags); - - discovery = (discovery_t *) hashbin_get_first(log); - while (discovery != NULL) { - /* Be sure to be one item ahead */ - curr = discovery; - discovery = (discovery_t *) hashbin_get_next(log); - - /* Test if it's time to expire this discovery */ - if ((curr->data.saddr == saddr) && - (force || - ((jiffies - curr->timestamp) > DISCOVERY_EXPIRE_TIMEOUT))) - { - /* Create buffer as needed. - * As this function get called a lot and most time - * we don't have anything to put in the log (we are - * quite picky), we can save a lot of overhead - * by not calling kmalloc. Jean II */ - if(buffer == NULL) { - /* Create the client specific buffer */ - n = HASHBIN_GET_SIZE(log); - buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC); - if (buffer == NULL) { - spin_unlock_irqrestore(&log->hb_spinlock, flags); - return; - } - - } - - /* Copy discovery information */ - memcpy(&(buffer[i]), &(curr->data), - sizeof(discinfo_t)); - i++; - - /* Remove it from the log */ - curr = hashbin_remove_this(log, (irda_queue_t *) curr); - kfree(curr); - } - } - - /* Drop the spinlock before calling the higher layers, as - * we can't guarantee they won't call us back and create a - * deadlock. We will work on our own private data, so we - * don't care to be interrupted. - Jean II */ - spin_unlock_irqrestore(&log->hb_spinlock, flags); - - if(buffer == NULL) - return; - - /* Tell IrLMP and registered clients about it */ - irlmp_discovery_expiry(buffer, i); - - /* Free up our buffer */ - kfree(buffer); -} - -#if 0 -/* - * Function irlmp_dump_discoveries (log) - * - * Print out all discoveries in log - * - */ -void irlmp_dump_discoveries(hashbin_t *log) -{ - discovery_t *discovery; - - IRDA_ASSERT(log != NULL, return;); - - discovery = (discovery_t *) hashbin_get_first(log); - while (discovery != NULL) { - pr_debug("Discovery:\n"); - pr_debug(" daddr=%08x\n", discovery->data.daddr); - pr_debug(" saddr=%08x\n", discovery->data.saddr); - pr_debug(" nickname=%s\n", discovery->data.info); - - discovery = (discovery_t *) hashbin_get_next(log); - } -} -#endif - -/* - * Function irlmp_copy_discoveries (log, pn, mask) - * - * Copy all discoveries in a buffer - * - * This function implement a safe way for lmp clients to access the - * discovery log. The basic problem is that we don't want the log - * to change (add/remove) while the client is reading it. If the - * lmp client manipulate directly the hashbin, he is sure to get - * into troubles... - * The idea is that we copy all the current discovery log in a buffer - * which is specific to the client and pass this copy to him. As we - * do this operation with the spinlock grabbed, we are safe... - * Note : we don't want those clients to grab the spinlock, because - * we have no control on how long they will hold it... - * Note : we choose to copy the log in "struct irda_device_info" to - * save space... - * Note : the client must kfree himself() the log... - * Jean II - */ -struct irda_device_info *irlmp_copy_discoveries(hashbin_t *log, int *pn, - __u16 mask, int old_entries) -{ - discovery_t * discovery; - unsigned long flags; - discinfo_t * buffer = NULL; - int j_timeout = (sysctl_discovery_timeout * HZ); - int n; /* Size of the full log */ - int i = 0; /* How many we picked */ - - IRDA_ASSERT(pn != NULL, return NULL;); - IRDA_ASSERT(log != NULL, return NULL;); - - /* Save spin lock */ - spin_lock_irqsave(&log->hb_spinlock, flags); - - discovery = (discovery_t *) hashbin_get_first(log); - while (discovery != NULL) { - /* Mask out the ones we don't want : - * We want to match the discovery mask, and to get only - * the most recent one (unless we want old ones) */ - if ((get_unaligned((__u16 *)discovery->data.hints) & mask) && - ((old_entries) || - ((jiffies - discovery->firststamp) < j_timeout))) { - /* Create buffer as needed. - * As this function get called a lot and most time - * we don't have anything to put in the log (we are - * quite picky), we can save a lot of overhead - * by not calling kmalloc. Jean II */ - if(buffer == NULL) { - /* Create the client specific buffer */ - n = HASHBIN_GET_SIZE(log); - buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC); - if (buffer == NULL) { - spin_unlock_irqrestore(&log->hb_spinlock, flags); - return NULL; - } - - } - - /* Copy discovery information */ - memcpy(&(buffer[i]), &(discovery->data), - sizeof(discinfo_t)); - i++; - } - discovery = (discovery_t *) hashbin_get_next(log); - } - - spin_unlock_irqrestore(&log->hb_spinlock, flags); - - /* Get the actual number of device in the buffer and return */ - *pn = i; - return buffer; -} - -#ifdef CONFIG_PROC_FS -static inline discovery_t *discovery_seq_idx(loff_t pos) - -{ - discovery_t *discovery; - - for (discovery = (discovery_t *) hashbin_get_first(irlmp->cachelog); - discovery != NULL; - discovery = (discovery_t *) hashbin_get_next(irlmp->cachelog)) { - if (pos-- == 0) - break; - } - - return discovery; -} - -static void *discovery_seq_start(struct seq_file *seq, loff_t *pos) -{ - spin_lock_irq(&irlmp->cachelog->hb_spinlock); - return *pos ? discovery_seq_idx(*pos - 1) : SEQ_START_TOKEN; -} - -static void *discovery_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - ++*pos; - return (v == SEQ_START_TOKEN) - ? (void *) hashbin_get_first(irlmp->cachelog) - : (void *) hashbin_get_next(irlmp->cachelog); -} - -static void discovery_seq_stop(struct seq_file *seq, void *v) -{ - spin_unlock_irq(&irlmp->cachelog->hb_spinlock); -} - -static int discovery_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) - seq_puts(seq, "IrLMP: Discovery log:\n\n"); - else { - const discovery_t *discovery = v; - - seq_printf(seq, "nickname: %s, hint: 0x%02x%02x", - discovery->data.info, - discovery->data.hints[0], - discovery->data.hints[1]); -#if 0 - if ( discovery->data.hints[0] & HINT_PNP) - seq_puts(seq, "PnP Compatible "); - if ( discovery->data.hints[0] & HINT_PDA) - seq_puts(seq, "PDA/Palmtop "); - if ( discovery->data.hints[0] & HINT_COMPUTER) - seq_puts(seq, "Computer "); - if ( discovery->data.hints[0] & HINT_PRINTER) - seq_puts(seq, "Printer "); - if ( discovery->data.hints[0] & HINT_MODEM) - seq_puts(seq, "Modem "); - if ( discovery->data.hints[0] & HINT_FAX) - seq_puts(seq, "Fax "); - if ( discovery->data.hints[0] & HINT_LAN) - seq_puts(seq, "LAN Access "); - - if ( discovery->data.hints[1] & HINT_TELEPHONY) - seq_puts(seq, "Telephony "); - if ( discovery->data.hints[1] & HINT_FILE_SERVER) - seq_puts(seq, "File Server "); - if ( discovery->data.hints[1] & HINT_COMM) - seq_puts(seq, "IrCOMM "); - if ( discovery->data.hints[1] & HINT_OBEX) - seq_puts(seq, "IrOBEX "); -#endif - seq_printf(seq,", saddr: 0x%08x, daddr: 0x%08x\n\n", - discovery->data.saddr, - discovery->data.daddr); - - seq_putc(seq, '\n'); - } - return 0; -} - -static const struct seq_operations discovery_seq_ops = { - .start = discovery_seq_start, - .next = discovery_seq_next, - .stop = discovery_seq_stop, - .show = discovery_seq_show, -}; - -static int discovery_seq_open(struct inode *inode, struct file *file) -{ - IRDA_ASSERT(irlmp != NULL, return -EINVAL;); - - return seq_open(file, &discovery_seq_ops); -} - -const struct file_operations discovery_seq_fops = { - .owner = THIS_MODULE, - .open = discovery_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; -#endif diff --git a/net/irda/ircomm/Kconfig b/net/irda/ircomm/Kconfig deleted file mode 100644 index 19492c1707b7..000000000000 --- a/net/irda/ircomm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -config IRCOMM - tristate "IrCOMM protocol" - depends on IRDA && TTY - help - Say Y here if you want to build support for the IrCOMM protocol. - To compile it as modules, choose M here: the modules will be - called ircomm and ircomm_tty. - IrCOMM implements serial port emulation, and makes it possible to - use all existing applications that understands TTY's with an - infrared link. Thus you should be able to use application like PPP, - minicom and others. - diff --git a/net/irda/ircomm/Makefile b/net/irda/ircomm/Makefile deleted file mode 100644 index ab23b5ba7e33..000000000000 --- a/net/irda/ircomm/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Linux IrDA IrCOMM protocol layer. -# - -obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o - -ircomm-y := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o -ircomm-tty-y := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o diff --git a/net/irda/ircomm/ircomm_core.c b/net/irda/ircomm/ircomm_core.c deleted file mode 100644 index 3af219545f6d..000000000000 --- a/net/irda/ircomm/ircomm_core.c +++ /dev/null @@ -1,563 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_core.c - * Version: 1.0 - * Description: IrCOMM service interface - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Jun 6 20:37:34 1999 - * Modified at: Tue Dec 21 13:26:41 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/module.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/init.h> -#include <linux/slab.h> - -#include <net/irda/irda.h> -#include <net/irda/irmod.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/irttp.h> -#include <net/irda/irias_object.h> - -#include <net/irda/ircomm_event.h> -#include <net/irda/ircomm_lmp.h> -#include <net/irda/ircomm_ttp.h> -#include <net/irda/ircomm_param.h> -#include <net/irda/ircomm_core.h> - -static int __ircomm_close(struct ircomm_cb *self); -static void ircomm_control_indication(struct ircomm_cb *self, - struct sk_buff *skb, int clen); - -#ifdef CONFIG_PROC_FS -extern struct proc_dir_entry *proc_irda; -static int ircomm_seq_open(struct inode *, struct file *); - -static const struct file_operations ircomm_proc_fops = { - .owner = THIS_MODULE, - .open = ircomm_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; -#endif /* CONFIG_PROC_FS */ - -hashbin_t *ircomm = NULL; - -static int __init ircomm_init(void) -{ - ircomm = hashbin_new(HB_LOCK); - if (ircomm == NULL) { - net_err_ratelimited("%s(), can't allocate hashbin!\n", - __func__); - return -ENOMEM; - } - -#ifdef CONFIG_PROC_FS - { struct proc_dir_entry *ent; - ent = proc_create("ircomm", 0, proc_irda, &ircomm_proc_fops); - if (!ent) { - printk(KERN_ERR "ircomm_init: can't create /proc entry!\n"); - return -ENODEV; - } - } -#endif /* CONFIG_PROC_FS */ - - net_info_ratelimited("IrCOMM protocol (Dag Brattli)\n"); - - return 0; -} - -static void __exit ircomm_cleanup(void) -{ - hashbin_delete(ircomm, (FREE_FUNC) __ircomm_close); - -#ifdef CONFIG_PROC_FS - remove_proc_entry("ircomm", proc_irda); -#endif /* CONFIG_PROC_FS */ -} - -/* - * Function ircomm_open (client_notify) - * - * Start a new IrCOMM instance - * - */ -struct ircomm_cb *ircomm_open(notify_t *notify, __u8 service_type, int line) -{ - struct ircomm_cb *self = NULL; - int ret; - - pr_debug("%s(), service_type=0x%02x\n", __func__ , - service_type); - - IRDA_ASSERT(ircomm != NULL, return NULL;); - - self = kzalloc(sizeof(struct ircomm_cb), GFP_KERNEL); - if (self == NULL) - return NULL; - - self->notify = *notify; - self->magic = IRCOMM_MAGIC; - - /* Check if we should use IrLMP or IrTTP */ - if (service_type & IRCOMM_3_WIRE_RAW) { - self->flow_status = FLOW_START; - ret = ircomm_open_lsap(self); - } else - ret = ircomm_open_tsap(self); - - if (ret < 0) { - kfree(self); - return NULL; - } - - self->service_type = service_type; - self->line = line; - - hashbin_insert(ircomm, (irda_queue_t *) self, line, NULL); - - ircomm_next_state(self, IRCOMM_IDLE); - - return self; -} - -EXPORT_SYMBOL(ircomm_open); - -/* - * Function ircomm_close_instance (self) - * - * Remove IrCOMM instance - * - */ -static int __ircomm_close(struct ircomm_cb *self) -{ - /* Disconnect link if any */ - ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, NULL, NULL); - - /* Remove TSAP */ - if (self->tsap) { - irttp_close_tsap(self->tsap); - self->tsap = NULL; - } - - /* Remove LSAP */ - if (self->lsap) { - irlmp_close_lsap(self->lsap); - self->lsap = NULL; - } - self->magic = 0; - - kfree(self); - - return 0; -} - -/* - * Function ircomm_close (self) - * - * Closes and removes the specified IrCOMM instance - * - */ -int ircomm_close(struct ircomm_cb *self) -{ - struct ircomm_cb *entry; - - IRDA_ASSERT(self != NULL, return -EIO;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EIO;); - - entry = hashbin_remove(ircomm, self->line, NULL); - - IRDA_ASSERT(entry == self, return -1;); - - return __ircomm_close(self); -} - -EXPORT_SYMBOL(ircomm_close); - -/* - * Function ircomm_connect_request (self, service_type) - * - * Impl. of this function is differ from one of the reference. This - * function does discovery as well as sending connect request - * - */ -int ircomm_connect_request(struct ircomm_cb *self, __u8 dlsap_sel, - __u32 saddr, __u32 daddr, struct sk_buff *skb, - __u8 service_type) -{ - struct ircomm_info info; - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); - - self->service_type= service_type; - - info.dlsap_sel = dlsap_sel; - info.saddr = saddr; - info.daddr = daddr; - - ret = ircomm_do_event(self, IRCOMM_CONNECT_REQUEST, skb, &info); - - return ret; -} - -EXPORT_SYMBOL(ircomm_connect_request); - -/* - * Function ircomm_connect_indication (self, qos, skb) - * - * Notify user layer about the incoming connection - * - */ -void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb, - struct ircomm_info *info) -{ - /* - * If there are any data hiding in the control channel, we must - * deliver it first. The side effect is that the control channel - * will be removed from the skb - */ - if (self->notify.connect_indication) - self->notify.connect_indication(self->notify.instance, self, - info->qos, info->max_data_size, - info->max_header_size, skb); - else { - pr_debug("%s(), missing handler\n", __func__); - } -} - -/* - * Function ircomm_connect_response (self, userdata, max_sdu_size) - * - * User accepts connection - * - */ -int ircomm_connect_response(struct ircomm_cb *self, struct sk_buff *userdata) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); - - ret = ircomm_do_event(self, IRCOMM_CONNECT_RESPONSE, userdata, NULL); - - return ret; -} - -EXPORT_SYMBOL(ircomm_connect_response); - -/* - * Function connect_confirm (self, skb) - * - * Notify user layer that the link is now connected - * - */ -void ircomm_connect_confirm(struct ircomm_cb *self, struct sk_buff *skb, - struct ircomm_info *info) -{ - if (self->notify.connect_confirm ) - self->notify.connect_confirm(self->notify.instance, - self, info->qos, - info->max_data_size, - info->max_header_size, skb); - else { - pr_debug("%s(), missing handler\n", __func__); - } -} - -/* - * Function ircomm_data_request (self, userdata) - * - * Send IrCOMM data to peer device - * - */ -int ircomm_data_request(struct ircomm_cb *self, struct sk_buff *skb) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -EFAULT;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;); - IRDA_ASSERT(skb != NULL, return -EFAULT;); - - ret = ircomm_do_event(self, IRCOMM_DATA_REQUEST, skb, NULL); - - return ret; -} - -EXPORT_SYMBOL(ircomm_data_request); - -/* - * Function ircomm_data_indication (self, skb) - * - * Data arrived, so deliver it to user - * - */ -void ircomm_data_indication(struct ircomm_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(skb->len > 0, return;); - - if (self->notify.data_indication) - self->notify.data_indication(self->notify.instance, self, skb); - else { - pr_debug("%s(), missing handler\n", __func__); - } -} - -/* - * Function ircomm_process_data (self, skb) - * - * Data arrived which may contain control channel data - * - */ -void ircomm_process_data(struct ircomm_cb *self, struct sk_buff *skb) -{ - int clen; - - IRDA_ASSERT(skb->len > 0, return;); - - clen = skb->data[0]; - - /* - * Input validation check: a stir4200/mcp2150 combinations sometimes - * results in frames with clen > remaining packet size. These are - * illegal; if we throw away just this frame then it seems to carry on - * fine - */ - if (unlikely(skb->len < (clen + 1))) { - pr_debug("%s() throwing away illegal frame\n", - __func__); - return; - } - - /* - * If there are any data hiding in the control channel, we must - * deliver it first. The side effect is that the control channel - * will be removed from the skb - */ - if (clen > 0) - ircomm_control_indication(self, skb, clen); - - /* Remove control channel from data channel */ - skb_pull(skb, clen+1); - - if (skb->len) - ircomm_data_indication(self, skb); - else { - pr_debug("%s(), data was control info only!\n", - __func__); - } -} - -/* - * Function ircomm_control_request (self, params) - * - * Send control data to peer device - * - */ -int ircomm_control_request(struct ircomm_cb *self, struct sk_buff *skb) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -EFAULT;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;); - IRDA_ASSERT(skb != NULL, return -EFAULT;); - - ret = ircomm_do_event(self, IRCOMM_CONTROL_REQUEST, skb, NULL); - - return ret; -} - -EXPORT_SYMBOL(ircomm_control_request); - -/* - * Function ircomm_control_indication (self, skb) - * - * Data has arrived on the control channel - * - */ -static void ircomm_control_indication(struct ircomm_cb *self, - struct sk_buff *skb, int clen) -{ - /* Use udata for delivering data on the control channel */ - if (self->notify.udata_indication) { - struct sk_buff *ctrl_skb; - - /* We don't own the skb, so clone it */ - ctrl_skb = skb_clone(skb, GFP_ATOMIC); - if (!ctrl_skb) - return; - - /* Remove data channel from control channel */ - skb_trim(ctrl_skb, clen+1); - - self->notify.udata_indication(self->notify.instance, self, - ctrl_skb); - - /* Drop reference count - - * see ircomm_tty_control_indication(). */ - dev_kfree_skb(ctrl_skb); - } else { - pr_debug("%s(), missing handler\n", __func__); - } -} - -/* - * Function ircomm_disconnect_request (self, userdata, priority) - * - * User layer wants to disconnect the IrCOMM connection - * - */ -int ircomm_disconnect_request(struct ircomm_cb *self, struct sk_buff *userdata) -{ - struct ircomm_info info; - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); - - ret = ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, userdata, - &info); - return ret; -} - -EXPORT_SYMBOL(ircomm_disconnect_request); - -/* - * Function disconnect_indication (self, skb) - * - * Tell user that the link has been disconnected - * - */ -void ircomm_disconnect_indication(struct ircomm_cb *self, struct sk_buff *skb, - struct ircomm_info *info) -{ - IRDA_ASSERT(info != NULL, return;); - - if (self->notify.disconnect_indication) { - self->notify.disconnect_indication(self->notify.instance, self, - info->reason, skb); - } else { - pr_debug("%s(), missing handler\n", __func__); - } -} - -/* - * Function ircomm_flow_request (self, flow) - * - * - * - */ -void ircomm_flow_request(struct ircomm_cb *self, LOCAL_FLOW flow) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - - if (self->service_type == IRCOMM_3_WIRE_RAW) - return; - - irttp_flow_request(self->tsap, flow); -} - -EXPORT_SYMBOL(ircomm_flow_request); - -#ifdef CONFIG_PROC_FS -static void *ircomm_seq_start(struct seq_file *seq, loff_t *pos) -{ - struct ircomm_cb *self; - loff_t off = 0; - - spin_lock_irq(&ircomm->hb_spinlock); - - for (self = (struct ircomm_cb *) hashbin_get_first(ircomm); - self != NULL; - self = (struct ircomm_cb *) hashbin_get_next(ircomm)) { - if (off++ == *pos) - break; - - } - return self; -} - -static void *ircomm_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - ++*pos; - - return (void *) hashbin_get_next(ircomm); -} - -static void ircomm_seq_stop(struct seq_file *seq, void *v) -{ - spin_unlock_irq(&ircomm->hb_spinlock); -} - -static int ircomm_seq_show(struct seq_file *seq, void *v) -{ - const struct ircomm_cb *self = v; - - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EINVAL; ); - - if(self->line < 0x10) - seq_printf(seq, "ircomm%d", self->line); - else - seq_printf(seq, "irlpt%d", self->line - 0x10); - - seq_printf(seq, - " state: %s, slsap_sel: %#02x, dlsap_sel: %#02x, mode:", - ircomm_state[ self->state], - self->slsap_sel, self->dlsap_sel); - - if(self->service_type & IRCOMM_3_WIRE_RAW) - seq_printf(seq, " 3-wire-raw"); - if(self->service_type & IRCOMM_3_WIRE) - seq_printf(seq, " 3-wire"); - if(self->service_type & IRCOMM_9_WIRE) - seq_printf(seq, " 9-wire"); - if(self->service_type & IRCOMM_CENTRONICS) - seq_printf(seq, " Centronics"); - seq_putc(seq, '\n'); - - return 0; -} - -static const struct seq_operations ircomm_seq_ops = { - .start = ircomm_seq_start, - .next = ircomm_seq_next, - .stop = ircomm_seq_stop, - .show = ircomm_seq_show, -}; - -static int ircomm_seq_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &ircomm_seq_ops); -} -#endif /* CONFIG_PROC_FS */ - -MODULE_AUTHOR("Dag Brattli <dag@brattli.net>"); -MODULE_DESCRIPTION("IrCOMM protocol"); -MODULE_LICENSE("GPL"); - -module_init(ircomm_init); -module_exit(ircomm_cleanup); diff --git a/net/irda/ircomm/ircomm_event.c b/net/irda/ircomm/ircomm_event.c deleted file mode 100644 index b0730ac9f388..000000000000 --- a/net/irda/ircomm/ircomm_event.c +++ /dev/null @@ -1,246 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_event.c - * Version: 1.0 - * Description: IrCOMM layer state machine - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Jun 6 20:33:11 1999 - * Modified at: Sun Dec 12 13:44:32 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/proc_fs.h> -#include <linux/init.h> - -#include <net/irda/irda.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/irttp.h> -#include <net/irda/irias_object.h> - -#include <net/irda/ircomm_core.h> -#include <net/irda/ircomm_event.h> - -static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info); -static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info); -static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info); -static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info); - -const char *const ircomm_state[] = { - "IRCOMM_IDLE", - "IRCOMM_WAITI", - "IRCOMM_WAITR", - "IRCOMM_CONN", -}; - -static const char *const ircomm_event[] __maybe_unused = { - "IRCOMM_CONNECT_REQUEST", - "IRCOMM_CONNECT_RESPONSE", - "IRCOMM_TTP_CONNECT_INDICATION", - "IRCOMM_LMP_CONNECT_INDICATION", - "IRCOMM_TTP_CONNECT_CONFIRM", - "IRCOMM_LMP_CONNECT_CONFIRM", - - "IRCOMM_LMP_DISCONNECT_INDICATION", - "IRCOMM_TTP_DISCONNECT_INDICATION", - "IRCOMM_DISCONNECT_REQUEST", - - "IRCOMM_TTP_DATA_INDICATION", - "IRCOMM_LMP_DATA_INDICATION", - "IRCOMM_DATA_REQUEST", - "IRCOMM_CONTROL_REQUEST", - "IRCOMM_CONTROL_INDICATION", -}; - -static int (*state[])(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info) = -{ - ircomm_state_idle, - ircomm_state_waiti, - ircomm_state_waitr, - ircomm_state_conn, -}; - -/* - * Function ircomm_state_idle (self, event, skb) - * - * IrCOMM is currently idle - * - */ -static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info) -{ - int ret = 0; - - switch (event) { - case IRCOMM_CONNECT_REQUEST: - ircomm_next_state(self, IRCOMM_WAITI); - ret = self->issue.connect_request(self, skb, info); - break; - case IRCOMM_TTP_CONNECT_INDICATION: - case IRCOMM_LMP_CONNECT_INDICATION: - ircomm_next_state(self, IRCOMM_WAITR); - ircomm_connect_indication(self, skb, info); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_state_waiti (self, event, skb) - * - * The IrCOMM user has requested an IrCOMM connection to the remote - * device and is awaiting confirmation - */ -static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info) -{ - int ret = 0; - - switch (event) { - case IRCOMM_TTP_CONNECT_CONFIRM: - case IRCOMM_LMP_CONNECT_CONFIRM: - ircomm_next_state(self, IRCOMM_CONN); - ircomm_connect_confirm(self, skb, info); - break; - case IRCOMM_TTP_DISCONNECT_INDICATION: - case IRCOMM_LMP_DISCONNECT_INDICATION: - ircomm_next_state(self, IRCOMM_IDLE); - ircomm_disconnect_indication(self, skb, info); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_state_waitr (self, event, skb) - * - * IrCOMM has received an incoming connection request and is awaiting - * response from the user - */ -static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info) -{ - int ret = 0; - - switch (event) { - case IRCOMM_CONNECT_RESPONSE: - ircomm_next_state(self, IRCOMM_CONN); - ret = self->issue.connect_response(self, skb); - break; - case IRCOMM_DISCONNECT_REQUEST: - ircomm_next_state(self, IRCOMM_IDLE); - ret = self->issue.disconnect_request(self, skb, info); - break; - case IRCOMM_TTP_DISCONNECT_INDICATION: - case IRCOMM_LMP_DISCONNECT_INDICATION: - ircomm_next_state(self, IRCOMM_IDLE); - ircomm_disconnect_indication(self, skb, info); - break; - default: - pr_debug("%s(), unknown event = %s\n", __func__ , - ircomm_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_state_conn (self, event, skb) - * - * IrCOMM is connected to the peer IrCOMM device - * - */ -static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info) -{ - int ret = 0; - - switch (event) { - case IRCOMM_DATA_REQUEST: - ret = self->issue.data_request(self, skb, 0); - break; - case IRCOMM_TTP_DATA_INDICATION: - ircomm_process_data(self, skb); - break; - case IRCOMM_LMP_DATA_INDICATION: - ircomm_data_indication(self, skb); - break; - case IRCOMM_CONTROL_REQUEST: - /* Just send a separate frame for now */ - ret = self->issue.data_request(self, skb, skb->len); - break; - case IRCOMM_TTP_DISCONNECT_INDICATION: - case IRCOMM_LMP_DISCONNECT_INDICATION: - ircomm_next_state(self, IRCOMM_IDLE); - ircomm_disconnect_indication(self, skb, info); - break; - case IRCOMM_DISCONNECT_REQUEST: - ircomm_next_state(self, IRCOMM_IDLE); - ret = self->issue.disconnect_request(self, skb, info); - break; - default: - pr_debug("%s(), unknown event = %s\n", __func__ , - ircomm_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_do_event (self, event, skb) - * - * Process event - * - */ -int ircomm_do_event(struct ircomm_cb *self, IRCOMM_EVENT event, - struct sk_buff *skb, struct ircomm_info *info) -{ - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_state[self->state], ircomm_event[event]); - - return (*state[self->state])(self, event, skb, info); -} - -/* - * Function ircomm_next_state (self, state) - * - * Switch state - * - */ -void ircomm_next_state(struct ircomm_cb *self, IRCOMM_STATE state) -{ - self->state = state; - - pr_debug("%s: next state=%s, service type=%d\n", __func__ , - ircomm_state[self->state], self->service_type); -} diff --git a/net/irda/ircomm/ircomm_lmp.c b/net/irda/ircomm/ircomm_lmp.c deleted file mode 100644 index e4cc847bb933..000000000000 --- a/net/irda/ircomm/ircomm_lmp.c +++ /dev/null @@ -1,350 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_lmp.c - * Version: 1.0 - * Description: Interface between IrCOMM and IrLMP - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Jun 6 20:48:27 1999 - * Modified at: Sun Dec 12 13:44:17 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Sources: Previous IrLPT work by Thomas Davis - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/init.h> -#include <linux/gfp.h> - -#include <net/irda/irda.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/irda_device.h> /* struct irda_skb_cb */ - -#include <net/irda/ircomm_event.h> -#include <net/irda/ircomm_lmp.h> - - -/* - * Function ircomm_lmp_connect_request (self, userdata) - * - * - * - */ -static int ircomm_lmp_connect_request(struct ircomm_cb *self, - struct sk_buff *userdata, - struct ircomm_info *info) -{ - int ret = 0; - - /* Don't forget to refcount it - should be NULL anyway */ - if(userdata) - skb_get(userdata); - - ret = irlmp_connect_request(self->lsap, info->dlsap_sel, - info->saddr, info->daddr, NULL, userdata); - return ret; -} - -/* - * Function ircomm_lmp_connect_response (self, skb) - * - * - * - */ -static int ircomm_lmp_connect_response(struct ircomm_cb *self, - struct sk_buff *userdata) -{ - struct sk_buff *tx_skb; - - /* Any userdata supplied? */ - if (userdata == NULL) { - tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - /* Reserve space for MUX and LAP header */ - skb_reserve(tx_skb, LMP_MAX_HEADER); - } else { - /* - * Check that the client has reserved enough space for - * headers - */ - IRDA_ASSERT(skb_headroom(userdata) >= LMP_MAX_HEADER, - return -1;); - - /* Don't forget to refcount it - should be NULL anyway */ - skb_get(userdata); - tx_skb = userdata; - } - - return irlmp_connect_response(self->lsap, tx_skb); -} - -static int ircomm_lmp_disconnect_request(struct ircomm_cb *self, - struct sk_buff *userdata, - struct ircomm_info *info) -{ - struct sk_buff *tx_skb; - int ret; - - if (!userdata) { - tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - /* Reserve space for MUX and LAP header */ - skb_reserve(tx_skb, LMP_MAX_HEADER); - userdata = tx_skb; - } else { - /* Don't forget to refcount it - should be NULL anyway */ - skb_get(userdata); - } - - ret = irlmp_disconnect_request(self->lsap, userdata); - - return ret; -} - -/* - * Function ircomm_lmp_flow_control (skb) - * - * This function is called when a data frame we have sent to IrLAP has - * been deallocated. We do this to make sure we don't flood IrLAP with - * frames, since we are not using the IrTTP flow control mechanism - */ -static void ircomm_lmp_flow_control(struct sk_buff *skb) -{ - struct irda_skb_cb *cb; - struct ircomm_cb *self; - int line; - - IRDA_ASSERT(skb != NULL, return;); - - cb = (struct irda_skb_cb *) skb->cb; - - line = cb->line; - - self = (struct ircomm_cb *) hashbin_lock_find(ircomm, line, NULL); - if (!self) { - pr_debug("%s(), didn't find myself\n", __func__); - return; - } - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - - self->pkt_count--; - - if ((self->pkt_count < 2) && (self->flow_status == FLOW_STOP)) { - pr_debug("%s(), asking TTY to start again!\n", __func__); - self->flow_status = FLOW_START; - if (self->notify.flow_indication) - self->notify.flow_indication(self->notify.instance, - self, FLOW_START); - } -} - -/* - * Function ircomm_lmp_data_request (self, userdata) - * - * Send data frame to peer device - * - */ -static int ircomm_lmp_data_request(struct ircomm_cb *self, - struct sk_buff *skb, - int not_used) -{ - struct irda_skb_cb *cb; - int ret; - - IRDA_ASSERT(skb != NULL, return -1;); - - cb = (struct irda_skb_cb *) skb->cb; - - cb->line = self->line; - - pr_debug("%s(), sending frame\n", __func__); - - /* Don't forget to refcount it - see ircomm_tty_do_softint() */ - skb_get(skb); - - skb_orphan(skb); - skb->destructor = ircomm_lmp_flow_control; - - if ((self->pkt_count++ > 7) && (self->flow_status == FLOW_START)) { - pr_debug("%s(), asking TTY to slow down!\n", __func__); - self->flow_status = FLOW_STOP; - if (self->notify.flow_indication) - self->notify.flow_indication(self->notify.instance, - self, FLOW_STOP); - } - ret = irlmp_data_request(self->lsap, skb); - if (ret) { - net_err_ratelimited("%s(), failed\n", __func__); - /* irlmp_data_request already free the packet */ - } - - return ret; -} - -/* - * Function ircomm_lmp_data_indication (instance, sap, skb) - * - * Incoming data which we must deliver to the state machine, to check - * we are still connected. - */ -static int ircomm_lmp_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - ircomm_do_event(self, IRCOMM_LMP_DATA_INDICATION, skb, NULL); - - /* Drop reference count - see ircomm_tty_data_indication(). */ - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function ircomm_lmp_connect_confirm (instance, sap, qos, max_sdu_size, - * max_header_size, skb) - * - * Connection has been confirmed by peer device - * - */ -static void ircomm_lmp_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_seg_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - struct ircomm_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(qos != NULL, return;); - - info.max_data_size = max_seg_size; - info.max_header_size = max_header_size; - info.qos = qos; - - ircomm_do_event(self, IRCOMM_LMP_CONNECT_CONFIRM, skb, &info); - - /* Drop reference count - see ircomm_tty_connect_confirm(). */ - dev_kfree_skb(skb); -} - -/* - * Function ircomm_lmp_connect_indication (instance, sap, qos, max_sdu_size, - * max_header_size, skb) - * - * Peer device wants to make a connection with us - * - */ -static void ircomm_lmp_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_seg_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *)instance; - struct ircomm_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(qos != NULL, return;); - - info.max_data_size = max_seg_size; - info.max_header_size = max_header_size; - info.qos = qos; - - ircomm_do_event(self, IRCOMM_LMP_CONNECT_INDICATION, skb, &info); - - /* Drop reference count - see ircomm_tty_connect_indication(). */ - dev_kfree_skb(skb); -} - -/* - * Function ircomm_lmp_disconnect_indication (instance, sap, reason, skb) - * - * Peer device has closed the connection, or the link went down for some - * other reason - */ -static void ircomm_lmp_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - struct ircomm_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - - info.reason = reason; - - ircomm_do_event(self, IRCOMM_LMP_DISCONNECT_INDICATION, skb, &info); - - /* Drop reference count - see ircomm_tty_disconnect_indication(). */ - if(skb) - dev_kfree_skb(skb); -} -/* - * Function ircomm_open_lsap (self) - * - * Open LSAP. This function will only be used when using "raw" services - * - */ -int ircomm_open_lsap(struct ircomm_cb *self) -{ - notify_t notify; - - /* Register callbacks */ - irda_notify_init(¬ify); - notify.data_indication = ircomm_lmp_data_indication; - notify.connect_confirm = ircomm_lmp_connect_confirm; - notify.connect_indication = ircomm_lmp_connect_indication; - notify.disconnect_indication = ircomm_lmp_disconnect_indication; - notify.instance = self; - strlcpy(notify.name, "IrCOMM", sizeof(notify.name)); - - self->lsap = irlmp_open_lsap(LSAP_ANY, ¬ify, 0); - if (!self->lsap) { - pr_debug("%sfailed to allocate tsap\n", __func__); - return -1; - } - self->slsap_sel = self->lsap->slsap_sel; - - /* - * Initialize the call-table for issuing commands - */ - self->issue.data_request = ircomm_lmp_data_request; - self->issue.connect_request = ircomm_lmp_connect_request; - self->issue.connect_response = ircomm_lmp_connect_response; - self->issue.disconnect_request = ircomm_lmp_disconnect_request; - - return 0; -} diff --git a/net/irda/ircomm/ircomm_param.c b/net/irda/ircomm/ircomm_param.c deleted file mode 100644 index 5728e76ca6d5..000000000000 --- a/net/irda/ircomm/ircomm_param.c +++ /dev/null @@ -1,501 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_param.c - * Version: 1.0 - * Description: Parameter handling for the IrCOMM protocol - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Mon Jun 7 10:25:11 1999 - * Modified at: Sun Jan 30 14:32:03 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/gfp.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -#include <net/irda/irda.h> -#include <net/irda/parameters.h> - -#include <net/irda/ircomm_core.h> -#include <net/irda/ircomm_tty_attach.h> -#include <net/irda/ircomm_tty.h> - -#include <net/irda/ircomm_param.h> - -static int ircomm_param_service_type(void *instance, irda_param_t *param, - int get); -static int ircomm_param_port_type(void *instance, irda_param_t *param, - int get); -static int ircomm_param_port_name(void *instance, irda_param_t *param, - int get); -static int ircomm_param_service_type(void *instance, irda_param_t *param, - int get); -static int ircomm_param_data_rate(void *instance, irda_param_t *param, - int get); -static int ircomm_param_data_format(void *instance, irda_param_t *param, - int get); -static int ircomm_param_flow_control(void *instance, irda_param_t *param, - int get); -static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get); -static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get); -static int ircomm_param_line_status(void *instance, irda_param_t *param, - int get); -static int ircomm_param_dte(void *instance, irda_param_t *param, int get); -static int ircomm_param_dce(void *instance, irda_param_t *param, int get); -static int ircomm_param_poll(void *instance, irda_param_t *param, int get); - -static const pi_minor_info_t pi_minor_call_table_common[] = { - { ircomm_param_service_type, PV_INT_8_BITS }, - { ircomm_param_port_type, PV_INT_8_BITS }, - { ircomm_param_port_name, PV_STRING } -}; -static const pi_minor_info_t pi_minor_call_table_non_raw[] = { - { ircomm_param_data_rate, PV_INT_32_BITS | PV_BIG_ENDIAN }, - { ircomm_param_data_format, PV_INT_8_BITS }, - { ircomm_param_flow_control, PV_INT_8_BITS }, - { ircomm_param_xon_xoff, PV_INT_16_BITS }, - { ircomm_param_enq_ack, PV_INT_16_BITS }, - { ircomm_param_line_status, PV_INT_8_BITS } -}; -static const pi_minor_info_t pi_minor_call_table_9_wire[] = { - { ircomm_param_dte, PV_INT_8_BITS }, - { ircomm_param_dce, PV_INT_8_BITS }, - { ircomm_param_poll, PV_NO_VALUE }, -}; - -static const pi_major_info_t pi_major_call_table[] = { - { pi_minor_call_table_common, 3 }, - { pi_minor_call_table_non_raw, 6 }, - { pi_minor_call_table_9_wire, 3 } -/* { pi_minor_call_table_centronics } */ -}; - -pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 }; - -/* - * Function ircomm_param_request (self, pi, flush) - * - * Queue a parameter for the control channel - * - */ -int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush) -{ - unsigned long flags; - struct sk_buff *skb; - int count; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - /* Make sure we don't send parameters for raw mode */ - if (self->service_type == IRCOMM_3_WIRE_RAW) - return 0; - - spin_lock_irqsave(&self->spinlock, flags); - - skb = self->ctrl_skb; - if (!skb) { - skb = alloc_skb(256, GFP_ATOMIC); - if (!skb) { - spin_unlock_irqrestore(&self->spinlock, flags); - return -ENOMEM; - } - - skb_reserve(skb, self->max_header_size); - self->ctrl_skb = skb; - } - /* - * Inserting is a little bit tricky since we don't know how much - * room we will need. But this should hopefully work OK - */ - count = irda_param_insert(self, pi, skb_tail_pointer(skb), - skb_tailroom(skb), &ircomm_param_info); - if (count < 0) { - net_warn_ratelimited("%s(), no room for parameter!\n", - __func__); - spin_unlock_irqrestore(&self->spinlock, flags); - return -1; - } - skb_put(skb, count); - pr_debug("%s(), skb->len=%d\n", __func__, skb->len); - - spin_unlock_irqrestore(&self->spinlock, flags); - - if (flush) { - /* ircomm_tty_do_softint will take care of the rest */ - schedule_work(&self->tqueue); - } - - return count; -} - -/* - * Function ircomm_param_service_type (self, buf, len) - * - * Handle service type, this function will both be called after the LM-IAS - * query and then the remote device sends its initial parameters - * - */ -static int ircomm_param_service_type(void *instance, irda_param_t *param, - int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - __u8 service_type = (__u8) param->pv.i; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) { - param->pv.i = self->settings.service_type; - return 0; - } - - /* Find all common service types */ - service_type &= self->service_type; - if (!service_type) { - pr_debug("%s(), No common service type to use!\n", __func__); - return -1; - } - pr_debug("%s(), services in common=%02x\n", __func__ , - service_type); - - /* - * Now choose a preferred service type of those available - */ - if (service_type & IRCOMM_CENTRONICS) - self->settings.service_type = IRCOMM_CENTRONICS; - else if (service_type & IRCOMM_9_WIRE) - self->settings.service_type = IRCOMM_9_WIRE; - else if (service_type & IRCOMM_3_WIRE) - self->settings.service_type = IRCOMM_3_WIRE; - else if (service_type & IRCOMM_3_WIRE_RAW) - self->settings.service_type = IRCOMM_3_WIRE_RAW; - - pr_debug("%s(), resulting service type=0x%02x\n", __func__ , - self->settings.service_type); - - /* - * Now the line is ready for some communication. Check if we are a - * server, and send over some initial parameters. - * Client do it in ircomm_tty_state_setup(). - * Note : we may get called from ircomm_tty_getvalue_confirm(), - * therefore before we even have open any socket. And self->client - * is initialised to TRUE only later. So, we check if the link is - * really initialised. - Jean II - */ - if ((self->max_header_size != IRCOMM_TTY_HDR_UNINITIALISED) && - (!self->client) && - (self->settings.service_type != IRCOMM_3_WIRE_RAW)) - { - /* Init connection */ - ircomm_tty_send_initial_parameters(self); - ircomm_tty_link_established(self); - } - - return 0; -} - -/* - * Function ircomm_param_port_type (self, param) - * - * The port type parameter tells if the devices are serial or parallel. - * Since we only advertise serial service, this parameter should only - * be equal to IRCOMM_SERIAL. - */ -static int ircomm_param_port_type(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) - param->pv.i = IRCOMM_SERIAL; - else { - self->settings.port_type = (__u8) param->pv.i; - - pr_debug("%s(), port type=%d\n", __func__ , - self->settings.port_type); - } - return 0; -} - -/* - * Function ircomm_param_port_name (self, param) - * - * Exchange port name - * - */ -static int ircomm_param_port_name(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) { - pr_debug("%s(), not imp!\n", __func__); - } else { - pr_debug("%s(), port-name=%s\n", __func__ , param->pv.c); - strncpy(self->settings.port_name, param->pv.c, 32); - } - - return 0; -} - -/* - * Function ircomm_param_data_rate (self, param) - * - * Exchange data rate to be used in this settings - * - */ -static int ircomm_param_data_rate(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) - param->pv.i = self->settings.data_rate; - else - self->settings.data_rate = param->pv.i; - - pr_debug("%s(), data rate = %d\n", __func__ , param->pv.i); - - return 0; -} - -/* - * Function ircomm_param_data_format (self, param) - * - * Exchange data format to be used in this settings - * - */ -static int ircomm_param_data_format(void *instance, irda_param_t *param, - int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) - param->pv.i = self->settings.data_format; - else - self->settings.data_format = (__u8) param->pv.i; - - return 0; -} - -/* - * Function ircomm_param_flow_control (self, param) - * - * Exchange flow control settings to be used in this settings - * - */ -static int ircomm_param_flow_control(void *instance, irda_param_t *param, - int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) - param->pv.i = self->settings.flow_control; - else - self->settings.flow_control = (__u8) param->pv.i; - - pr_debug("%s(), flow control = 0x%02x\n", __func__ , (__u8)param->pv.i); - - return 0; -} - -/* - * Function ircomm_param_xon_xoff (self, param) - * - * Exchange XON/XOFF characters - * - */ -static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) { - param->pv.i = self->settings.xonxoff[0]; - param->pv.i |= self->settings.xonxoff[1] << 8; - } else { - self->settings.xonxoff[0] = (__u16) param->pv.i & 0xff; - self->settings.xonxoff[1] = (__u16) param->pv.i >> 8; - } - - pr_debug("%s(), XON/XOFF = 0x%02x,0x%02x\n", __func__ , - param->pv.i & 0xff, param->pv.i >> 8); - - return 0; -} - -/* - * Function ircomm_param_enq_ack (self, param) - * - * Exchange ENQ/ACK characters - * - */ -static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) { - param->pv.i = self->settings.enqack[0]; - param->pv.i |= self->settings.enqack[1] << 8; - } else { - self->settings.enqack[0] = (__u16) param->pv.i & 0xff; - self->settings.enqack[1] = (__u16) param->pv.i >> 8; - } - - pr_debug("%s(), ENQ/ACK = 0x%02x,0x%02x\n", __func__ , - param->pv.i & 0xff, param->pv.i >> 8); - - return 0; -} - -/* - * Function ircomm_param_line_status (self, param) - * - * - * - */ -static int ircomm_param_line_status(void *instance, irda_param_t *param, - int get) -{ - pr_debug("%s(), not impl.\n", __func__); - - return 0; -} - -/* - * Function ircomm_param_dte (instance, param) - * - * If we get here, there must be some sort of null-modem connection, and - * we are probably working in server mode as well. - */ -static int ircomm_param_dte(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - __u8 dte; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (get) - param->pv.i = self->settings.dte; - else { - dte = (__u8) param->pv.i; - - self->settings.dce = 0; - - if (dte & IRCOMM_DELTA_DTR) - self->settings.dce |= (IRCOMM_DELTA_DSR| - IRCOMM_DELTA_RI | - IRCOMM_DELTA_CD); - if (dte & IRCOMM_DTR) - self->settings.dce |= (IRCOMM_DSR| - IRCOMM_RI | - IRCOMM_CD); - - if (dte & IRCOMM_DELTA_RTS) - self->settings.dce |= IRCOMM_DELTA_CTS; - if (dte & IRCOMM_RTS) - self->settings.dce |= IRCOMM_CTS; - - /* Take appropriate actions */ - ircomm_tty_check_modem_status(self); - - /* Null modem cable emulator */ - self->settings.null_modem = TRUE; - } - - return 0; -} - -/* - * Function ircomm_param_dce (instance, param) - * - * - * - */ -static int ircomm_param_dce(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - __u8 dce; - - pr_debug("%s(), dce = 0x%02x\n", __func__ , (__u8)param->pv.i); - - dce = (__u8) param->pv.i; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - self->settings.dce = dce; - - /* Check if any of the settings have changed */ - if (dce & 0x0f) { - if (dce & IRCOMM_DELTA_CTS) { - pr_debug("%s(), CTS\n", __func__); - } - } - - ircomm_tty_check_modem_status(self); - - return 0; -} - -/* - * Function ircomm_param_poll (instance, param) - * - * Called when the peer device is polling for the line settings - * - */ -static int ircomm_param_poll(void *instance, irda_param_t *param, int get) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - /* Poll parameters are always of length 0 (just a signal) */ - if (!get) { - /* Respond with DTE line settings */ - ircomm_param_request(self, IRCOMM_DTE, TRUE); - } - return 0; -} - - - - - diff --git a/net/irda/ircomm/ircomm_ttp.c b/net/irda/ircomm/ircomm_ttp.c deleted file mode 100644 index 4b81e0934770..000000000000 --- a/net/irda/ircomm/ircomm_ttp.c +++ /dev/null @@ -1,350 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_ttp.c - * Version: 1.0 - * Description: Interface between IrCOMM and IrTTP - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Jun 6 20:48:27 1999 - * Modified at: Mon Dec 13 11:35:13 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/init.h> - -#include <net/irda/irda.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/irttp.h> - -#include <net/irda/ircomm_event.h> -#include <net/irda/ircomm_ttp.h> - -static int ircomm_ttp_data_indication(void *instance, void *sap, - struct sk_buff *skb); -static void ircomm_ttp_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb); -static void ircomm_ttp_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb); -static void ircomm_ttp_flow_indication(void *instance, void *sap, - LOCAL_FLOW cmd); -static void ircomm_ttp_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *skb); -static int ircomm_ttp_data_request(struct ircomm_cb *self, - struct sk_buff *skb, - int clen); -static int ircomm_ttp_connect_request(struct ircomm_cb *self, - struct sk_buff *userdata, - struct ircomm_info *info); -static int ircomm_ttp_connect_response(struct ircomm_cb *self, - struct sk_buff *userdata); -static int ircomm_ttp_disconnect_request(struct ircomm_cb *self, - struct sk_buff *userdata, - struct ircomm_info *info); - -/* - * Function ircomm_open_tsap (self) - * - * - * - */ -int ircomm_open_tsap(struct ircomm_cb *self) -{ - notify_t notify; - - /* Register callbacks */ - irda_notify_init(¬ify); - notify.data_indication = ircomm_ttp_data_indication; - notify.connect_confirm = ircomm_ttp_connect_confirm; - notify.connect_indication = ircomm_ttp_connect_indication; - notify.flow_indication = ircomm_ttp_flow_indication; - notify.disconnect_indication = ircomm_ttp_disconnect_indication; - notify.instance = self; - strlcpy(notify.name, "IrCOMM", sizeof(notify.name)); - - self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, - ¬ify); - if (!self->tsap) { - pr_debug("%sfailed to allocate tsap\n", __func__); - return -1; - } - self->slsap_sel = self->tsap->stsap_sel; - - /* - * Initialize the call-table for issuing commands - */ - self->issue.data_request = ircomm_ttp_data_request; - self->issue.connect_request = ircomm_ttp_connect_request; - self->issue.connect_response = ircomm_ttp_connect_response; - self->issue.disconnect_request = ircomm_ttp_disconnect_request; - - return 0; -} - -/* - * Function ircomm_ttp_connect_request (self, userdata) - * - * - * - */ -static int ircomm_ttp_connect_request(struct ircomm_cb *self, - struct sk_buff *userdata, - struct ircomm_info *info) -{ - int ret = 0; - - /* Don't forget to refcount it - should be NULL anyway */ - if(userdata) - skb_get(userdata); - - ret = irttp_connect_request(self->tsap, info->dlsap_sel, - info->saddr, info->daddr, NULL, - TTP_SAR_DISABLE, userdata); - - return ret; -} - -/* - * Function ircomm_ttp_connect_response (self, skb) - * - * - * - */ -static int ircomm_ttp_connect_response(struct ircomm_cb *self, - struct sk_buff *userdata) -{ - int ret; - - /* Don't forget to refcount it - should be NULL anyway */ - if(userdata) - skb_get(userdata); - - ret = irttp_connect_response(self->tsap, TTP_SAR_DISABLE, userdata); - - return ret; -} - -/* - * Function ircomm_ttp_data_request (self, userdata) - * - * Send IrCOMM data to IrTTP layer. Currently we do not try to combine - * control data with pure data, so they will be sent as separate frames. - * Should not be a big problem though, since control frames are rare. But - * some of them are sent after connection establishment, so this can - * increase the latency a bit. - */ -static int ircomm_ttp_data_request(struct ircomm_cb *self, - struct sk_buff *skb, - int clen) -{ - int ret; - - IRDA_ASSERT(skb != NULL, return -1;); - - pr_debug("%s(), clen=%d\n", __func__ , clen); - - /* - * Insert clen field, currently we either send data only, or control - * only frames, to make things easier and avoid queueing - */ - IRDA_ASSERT(skb_headroom(skb) >= IRCOMM_HEADER_SIZE, return -1;); - - /* Don't forget to refcount it - see ircomm_tty_do_softint() */ - skb_get(skb); - - skb_push(skb, IRCOMM_HEADER_SIZE); - - skb->data[0] = clen; - - ret = irttp_data_request(self->tsap, skb); - if (ret) { - net_err_ratelimited("%s(), failed\n", __func__); - /* irttp_data_request already free the packet */ - } - - return ret; -} - -/* - * Function ircomm_ttp_data_indication (instance, sap, skb) - * - * Incoming data - * - */ -static int ircomm_ttp_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - ircomm_do_event(self, IRCOMM_TTP_DATA_INDICATION, skb, NULL); - - /* Drop reference count - see ircomm_tty_data_indication(). */ - dev_kfree_skb(skb); - - return 0; -} - -static void ircomm_ttp_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - struct ircomm_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(qos != NULL, goto out;); - - if (max_sdu_size != TTP_SAR_DISABLE) { - net_err_ratelimited("%s(), SAR not allowed for IrCOMM!\n", - __func__); - goto out; - } - - info.max_data_size = irttp_get_max_seg_size(self->tsap) - - IRCOMM_HEADER_SIZE; - info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE; - info.qos = qos; - - ircomm_do_event(self, IRCOMM_TTP_CONNECT_CONFIRM, skb, &info); - -out: - /* Drop reference count - see ircomm_tty_connect_confirm(). */ - dev_kfree_skb(skb); -} - -/* - * Function ircomm_ttp_connect_indication (instance, sap, qos, max_sdu_size, - * max_header_size, skb) - * - * - * - */ -static void ircomm_ttp_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *)instance; - struct ircomm_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(qos != NULL, goto out;); - - if (max_sdu_size != TTP_SAR_DISABLE) { - net_err_ratelimited("%s(), SAR not allowed for IrCOMM!\n", - __func__); - goto out; - } - - info.max_data_size = irttp_get_max_seg_size(self->tsap) - - IRCOMM_HEADER_SIZE; - info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE; - info.qos = qos; - - ircomm_do_event(self, IRCOMM_TTP_CONNECT_INDICATION, skb, &info); - -out: - /* Drop reference count - see ircomm_tty_connect_indication(). */ - dev_kfree_skb(skb); -} - -/* - * Function ircomm_ttp_disconnect_request (self, userdata, info) - * - * - * - */ -static int ircomm_ttp_disconnect_request(struct ircomm_cb *self, - struct sk_buff *userdata, - struct ircomm_info *info) -{ - int ret; - - /* Don't forget to refcount it - should be NULL anyway */ - if(userdata) - skb_get(userdata); - - ret = irttp_disconnect_request(self->tsap, userdata, P_NORMAL); - - return ret; -} - -/* - * Function ircomm_ttp_disconnect_indication (instance, sap, reason, skb) - * - * - * - */ -static void ircomm_ttp_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *skb) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - struct ircomm_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - - info.reason = reason; - - ircomm_do_event(self, IRCOMM_TTP_DISCONNECT_INDICATION, skb, &info); - - /* Drop reference count - see ircomm_tty_disconnect_indication(). */ - if(skb) - dev_kfree_skb(skb); -} - -/* - * Function ircomm_ttp_flow_indication (instance, sap, cmd) - * - * Layer below is telling us to start or stop the flow of data - * - */ -static void ircomm_ttp_flow_indication(void *instance, void *sap, - LOCAL_FLOW cmd) -{ - struct ircomm_cb *self = (struct ircomm_cb *) instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); - - if (self->notify.flow_indication) - self->notify.flow_indication(self->notify.instance, self, cmd); -} - - diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c deleted file mode 100644 index ec157c3419b5..000000000000 --- a/net/irda/ircomm/ircomm_tty.c +++ /dev/null @@ -1,1329 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_tty.c - * Version: 1.0 - * Description: IrCOMM serial TTY driver - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Jun 6 21:00:56 1999 - * Modified at: Wed Feb 23 00:09:02 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Sources: serial.c and previous IrCOMM work by Takahide Higuchi - * - * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/slab.h> -#include <linux/sched/signal.h> -#include <linux/seq_file.h> -#include <linux/termios.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/interrupt.h> -#include <linux/device.h> /* for MODULE_ALIAS_CHARDEV_MAJOR */ - -#include <linux/uaccess.h> - -#include <net/irda/irda.h> -#include <net/irda/irmod.h> - -#include <net/irda/ircomm_core.h> -#include <net/irda/ircomm_param.h> -#include <net/irda/ircomm_tty_attach.h> -#include <net/irda/ircomm_tty.h> - -static int ircomm_tty_install(struct tty_driver *driver, - struct tty_struct *tty); -static int ircomm_tty_open(struct tty_struct *tty, struct file *filp); -static void ircomm_tty_close(struct tty_struct * tty, struct file *filp); -static int ircomm_tty_write(struct tty_struct * tty, - const unsigned char *buf, int count); -static int ircomm_tty_write_room(struct tty_struct *tty); -static void ircomm_tty_throttle(struct tty_struct *tty); -static void ircomm_tty_unthrottle(struct tty_struct *tty); -static int ircomm_tty_chars_in_buffer(struct tty_struct *tty); -static void ircomm_tty_flush_buffer(struct tty_struct *tty); -static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch); -static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout); -static void ircomm_tty_hangup(struct tty_struct *tty); -static void ircomm_tty_do_softint(struct work_struct *work); -static void ircomm_tty_shutdown(struct ircomm_tty_cb *self); -static void ircomm_tty_stop(struct tty_struct *tty); - -static int ircomm_tty_data_indication(void *instance, void *sap, - struct sk_buff *skb); -static int ircomm_tty_control_indication(void *instance, void *sap, - struct sk_buff *skb); -static void ircomm_tty_flow_indication(void *instance, void *sap, - LOCAL_FLOW cmd); -#ifdef CONFIG_PROC_FS -static const struct file_operations ircomm_tty_proc_fops; -#endif /* CONFIG_PROC_FS */ -static struct tty_driver *driver; - -static hashbin_t *ircomm_tty = NULL; - -static const struct tty_operations ops = { - .install = ircomm_tty_install, - .open = ircomm_tty_open, - .close = ircomm_tty_close, - .write = ircomm_tty_write, - .write_room = ircomm_tty_write_room, - .chars_in_buffer = ircomm_tty_chars_in_buffer, - .flush_buffer = ircomm_tty_flush_buffer, - .ioctl = ircomm_tty_ioctl, /* ircomm_tty_ioctl.c */ - .tiocmget = ircomm_tty_tiocmget, /* ircomm_tty_ioctl.c */ - .tiocmset = ircomm_tty_tiocmset, /* ircomm_tty_ioctl.c */ - .throttle = ircomm_tty_throttle, - .unthrottle = ircomm_tty_unthrottle, - .send_xchar = ircomm_tty_send_xchar, - .set_termios = ircomm_tty_set_termios, - .stop = ircomm_tty_stop, - .start = ircomm_tty_start, - .hangup = ircomm_tty_hangup, - .wait_until_sent = ircomm_tty_wait_until_sent, -#ifdef CONFIG_PROC_FS - .proc_fops = &ircomm_tty_proc_fops, -#endif /* CONFIG_PROC_FS */ -}; - -static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise) -{ - struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb, - port); - /* - * Here, we use to lock those two guys, but as ircomm_param_request() - * does it itself, I don't see the point (and I see the deadlock). - * Jean II - */ - if (raise) - self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR; - else - self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR); - - ircomm_param_request(self, IRCOMM_DTE, TRUE); -} - -static int ircomm_port_carrier_raised(struct tty_port *port) -{ - struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb, - port); - return self->settings.dce & IRCOMM_CD; -} - -static const struct tty_port_operations ircomm_port_ops = { - .dtr_rts = ircomm_port_raise_dtr_rts, - .carrier_raised = ircomm_port_carrier_raised, -}; - -/* - * Function ircomm_tty_init() - * - * Init IrCOMM TTY layer/driver - * - */ -static int __init ircomm_tty_init(void) -{ - driver = alloc_tty_driver(IRCOMM_TTY_PORTS); - if (!driver) - return -ENOMEM; - ircomm_tty = hashbin_new(HB_LOCK); - if (ircomm_tty == NULL) { - net_err_ratelimited("%s(), can't allocate hashbin!\n", - __func__); - put_tty_driver(driver); - return -ENOMEM; - } - - driver->driver_name = "ircomm"; - driver->name = "ircomm"; - driver->major = IRCOMM_TTY_MAJOR; - driver->minor_start = IRCOMM_TTY_MINOR; - driver->type = TTY_DRIVER_TYPE_SERIAL; - driver->subtype = SERIAL_TYPE_NORMAL; - driver->init_termios = tty_std_termios; - driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(driver, &ops); - if (tty_register_driver(driver)) { - net_err_ratelimited("%s(): Couldn't register serial driver\n", - __func__); - put_tty_driver(driver); - return -1; - } - return 0; -} - -static void __exit __ircomm_tty_cleanup(struct ircomm_tty_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - ircomm_tty_shutdown(self); - - self->magic = 0; - tty_port_destroy(&self->port); - kfree(self); -} - -/* - * Function ircomm_tty_cleanup () - * - * Remove IrCOMM TTY layer/driver - * - */ -static void __exit ircomm_tty_cleanup(void) -{ - int ret; - - ret = tty_unregister_driver(driver); - if (ret) { - net_err_ratelimited("%s(), failed to unregister driver\n", - __func__); - return; - } - - hashbin_delete(ircomm_tty, (FREE_FUNC) __ircomm_tty_cleanup); - put_tty_driver(driver); -} - -/* - * Function ircomm_startup (self) - * - * - * - */ -static int ircomm_tty_startup(struct ircomm_tty_cb *self) -{ - notify_t notify; - int ret = -ENODEV; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - /* Check if already open */ - if (tty_port_initialized(&self->port)) { - pr_debug("%s(), already open so break out!\n", __func__); - return 0; - } - tty_port_set_initialized(&self->port, 1); - - /* Register with IrCOMM */ - irda_notify_init(¬ify); - /* These callbacks we must handle ourselves */ - notify.data_indication = ircomm_tty_data_indication; - notify.udata_indication = ircomm_tty_control_indication; - notify.flow_indication = ircomm_tty_flow_indication; - - /* Use the ircomm_tty interface for these ones */ - notify.disconnect_indication = ircomm_tty_disconnect_indication; - notify.connect_confirm = ircomm_tty_connect_confirm; - notify.connect_indication = ircomm_tty_connect_indication; - strlcpy(notify.name, "ircomm_tty", sizeof(notify.name)); - notify.instance = self; - - if (!self->ircomm) { - self->ircomm = ircomm_open(¬ify, self->service_type, - self->line); - } - if (!self->ircomm) - goto err; - - self->slsap_sel = self->ircomm->slsap_sel; - - /* Connect IrCOMM link with remote device */ - ret = ircomm_tty_attach_cable(self); - if (ret < 0) { - net_err_ratelimited("%s(), error attaching cable!\n", __func__); - goto err; - } - - return 0; -err: - tty_port_set_initialized(&self->port, 0); - return ret; -} - -/* - * Function ircomm_block_til_ready (self, filp) - * - * - * - */ -static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, - struct tty_struct *tty, struct file *filp) -{ - struct tty_port *port = &self->port; - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if (tty_io_error(tty)) { - tty_port_set_active(port, 1); - return 0; - } - - if (filp->f_flags & O_NONBLOCK) { - /* nonblock mode is set */ - if (C_BAUD(tty)) - tty_port_raise_dtr_rts(port); - tty_port_set_active(port, 1); - pr_debug("%s(), O_NONBLOCK requested!\n", __func__); - return 0; - } - - if (C_CLOCAL(tty)) { - pr_debug("%s(), doing CLOCAL!\n", __func__); - do_clocal = 1; - } - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * mgsl_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - pr_debug("%s(%d):block_til_ready before block on %s open_count=%d\n", - __FILE__, __LINE__, tty->driver->name, port->count); - - spin_lock_irqsave(&port->lock, flags); - port->count--; - port->blocked_open++; - spin_unlock_irqrestore(&port->lock, flags); - - while (1) { - if (C_BAUD(tty) && tty_port_initialized(port)) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - /* - * Check if link is ready now. Even if CLOCAL is - * specified, we cannot return before the IrCOMM link is - * ready - */ - if ((do_clocal || tty_port_carrier_raised(port)) && - self->state == IRCOMM_TTY_READY) - { - break; - } - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - pr_debug("%s(%d):block_til_ready blocking on %s open_count=%d\n", - __FILE__, __LINE__, tty->driver->name, port->count); - - schedule(); - } - - __set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&port->lock, flags); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - spin_unlock_irqrestore(&port->lock, flags); - - pr_debug("%s(%d):block_til_ready after blocking on %s open_count=%d\n", - __FILE__, __LINE__, tty->driver->name, port->count); - - if (!retval) - tty_port_set_active(port, 1); - - return retval; -} - - -static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) -{ - struct ircomm_tty_cb *self; - unsigned int line = tty->index; - - /* Check if instance already exists */ - self = hashbin_lock_find(ircomm_tty, line, NULL); - if (!self) { - /* No, so make new instance */ - self = kzalloc(sizeof(struct ircomm_tty_cb), GFP_KERNEL); - if (self == NULL) - return -ENOMEM; - - tty_port_init(&self->port); - self->port.ops = &ircomm_port_ops; - self->magic = IRCOMM_TTY_MAGIC; - self->flow = FLOW_STOP; - - self->line = line; - INIT_WORK(&self->tqueue, ircomm_tty_do_softint); - self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED; - self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED; - - /* Init some important stuff */ - init_timer(&self->watchdog_timer); - spin_lock_init(&self->spinlock); - - /* - * Force TTY into raw mode by default which is usually what - * we want for IrCOMM and IrLPT. This way applications will - * not have to twiddle with printcap etc. - * - * Note this is completely usafe and doesn't work properly - */ - tty->termios.c_iflag = 0; - tty->termios.c_oflag = 0; - - /* Insert into hash */ - hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL); - } - - tty->driver_data = self; - - return tty_port_install(&self->port, driver, tty); -} - -/* - * Function ircomm_tty_open (tty, filp) - * - * This routine is called when a particular tty device is opened. This - * routine is mandatory; if this routine is not filled in, the attempted - * open will fail with ENODEV. - */ -static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) -{ - struct ircomm_tty_cb *self = tty->driver_data; - unsigned long flags; - int ret; - - /* ++ is not atomic, so this should be protected - Jean II */ - spin_lock_irqsave(&self->port.lock, flags); - self->port.count++; - spin_unlock_irqrestore(&self->port.lock, flags); - tty_port_tty_set(&self->port, tty); - - pr_debug("%s(), %s%d, count = %d\n", __func__ , tty->driver->name, - self->line, self->port.count); - - /* Not really used by us, but lets do it anyway */ - self->port.low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - /* Check if this is a "normal" ircomm device, or an irlpt device */ - if (self->line < 0x10) { - self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE; - self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */ - /* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */ - self->settings.dce = IRCOMM_CTS | IRCOMM_CD | IRCOMM_DSR | IRCOMM_RI; /* Default line settings */ - pr_debug("%s(), IrCOMM device\n", __func__); - } else { - pr_debug("%s(), IrLPT device\n", __func__); - self->service_type = IRCOMM_3_WIRE_RAW; - self->settings.service_type = IRCOMM_3_WIRE_RAW; /* Default */ - } - - ret = ircomm_tty_startup(self); - if (ret) - return ret; - - ret = ircomm_tty_block_til_ready(self, tty, filp); - if (ret) { - pr_debug("%s(), returning after block_til_ready with %d\n", - __func__, ret); - - return ret; - } - return 0; -} - -/* - * Function ircomm_tty_close (tty, filp) - * - * This routine is called when a particular tty device is closed. - * - */ -static void ircomm_tty_close(struct tty_struct *tty, struct file *filp) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - struct tty_port *port = &self->port; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - if (tty_port_close_start(port, tty, filp) == 0) - return; - - ircomm_tty_shutdown(self); - - tty_driver_flush_buffer(tty); - - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); -} - -/* - * Function ircomm_tty_flush_buffer (tty) - * - * - * - */ -static void ircomm_tty_flush_buffer(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - /* - * Let do_softint() do this to avoid race condition with - * do_softint() ;-) - */ - schedule_work(&self->tqueue); -} - -/* - * Function ircomm_tty_do_softint (work) - * - * We use this routine to give the write wakeup to the user at at a - * safe time (as fast as possible after write have completed). This - * can be compared to the Tx interrupt. - */ -static void ircomm_tty_do_softint(struct work_struct *work) -{ - struct ircomm_tty_cb *self = - container_of(work, struct ircomm_tty_cb, tqueue); - struct tty_struct *tty; - unsigned long flags; - struct sk_buff *skb, *ctrl_skb; - - if (!self || self->magic != IRCOMM_TTY_MAGIC) - return; - - tty = tty_port_tty_get(&self->port); - if (!tty) - return; - - /* Unlink control buffer */ - spin_lock_irqsave(&self->spinlock, flags); - - ctrl_skb = self->ctrl_skb; - self->ctrl_skb = NULL; - - spin_unlock_irqrestore(&self->spinlock, flags); - - /* Flush control buffer if any */ - if(ctrl_skb) { - if(self->flow == FLOW_START) - ircomm_control_request(self->ircomm, ctrl_skb); - /* Drop reference count - see ircomm_ttp_data_request(). */ - dev_kfree_skb(ctrl_skb); - } - - if (tty->hw_stopped) - goto put; - - /* Unlink transmit buffer */ - spin_lock_irqsave(&self->spinlock, flags); - - skb = self->tx_skb; - self->tx_skb = NULL; - - spin_unlock_irqrestore(&self->spinlock, flags); - - /* Flush transmit buffer if any */ - if (skb) { - ircomm_tty_do_event(self, IRCOMM_TTY_DATA_REQUEST, skb, NULL); - /* Drop reference count - see ircomm_ttp_data_request(). */ - dev_kfree_skb(skb); - } - - /* Check if user (still) wants to be waken up */ - tty_wakeup(tty); -put: - tty_kref_put(tty); -} - -/* - * Function ircomm_tty_write (tty, buf, count) - * - * This routine is called by the kernel to write a series of characters - * to the tty device. The characters may come from user space or kernel - * space. This routine will return the number of characters actually - * accepted for writing. This routine is mandatory. - */ -static int ircomm_tty_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned long flags; - struct sk_buff *skb; - int tailroom = 0; - int len = 0; - int size; - - pr_debug("%s(), count=%d, hw_stopped=%d\n", __func__ , count, - tty->hw_stopped); - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - /* We may receive packets from the TTY even before we have finished - * our setup. Not cool. - * The problem is that we don't know the final header and data size - * to create the proper skb, so any skb we would create would have - * bogus header and data size, so need care. - * We use a bogus header size to safely detect this condition. - * Another problem is that hw_stopped was set to 0 way before it - * should be, so we would drop this skb. It should now be fixed. - * One option is to not accept data until we are properly setup. - * But, I suspect that when it happens, the ppp line discipline - * just "drops" the data, which might screw up connect scripts. - * The second option is to create a "safe skb", with large header - * and small size (see ircomm_tty_open() for values). - * We just need to make sure that when the real values get filled, - * we don't mess up the original "safe skb" (see tx_data_size). - * Jean II */ - if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED) { - pr_debug("%s() : not initialised\n", __func__); -#ifdef IRCOMM_NO_TX_BEFORE_INIT - /* We didn't consume anything, TTY will retry */ - return 0; -#endif - } - - if (count < 1) - return 0; - - /* Protect our manipulation of self->tx_skb and related */ - spin_lock_irqsave(&self->spinlock, flags); - - /* Fetch current transmit buffer */ - skb = self->tx_skb; - - /* - * Send out all the data we get, possibly as multiple fragmented - * frames, but this will only happen if the data is larger than the - * max data size. The normal case however is just the opposite, and - * this function may be called multiple times, and will then actually - * defragment the data and send it out as one packet as soon as - * possible, but at a safer point in time - */ - while (count) { - size = count; - - /* Adjust data size to the max data size */ - if (size > self->max_data_size) - size = self->max_data_size; - - /* - * Do we already have a buffer ready for transmit, or do - * we need to allocate a new frame - */ - if (skb) { - /* - * Any room for more data at the end of the current - * transmit buffer? Cannot use skb_tailroom, since - * dev_alloc_skb gives us a larger skb than we - * requested - * Note : use tx_data_size, because max_data_size - * may have changed and we don't want to overwrite - * the skb. - Jean II - */ - if ((tailroom = (self->tx_data_size - skb->len)) > 0) { - /* Adjust data to tailroom */ - if (size > tailroom) - size = tailroom; - } else { - /* - * Current transmit frame is full, so break - * out, so we can send it as soon as possible - */ - break; - } - } else { - /* Prepare a full sized frame */ - skb = alloc_skb(self->max_data_size+ - self->max_header_size, - GFP_ATOMIC); - if (!skb) { - spin_unlock_irqrestore(&self->spinlock, flags); - return -ENOBUFS; - } - skb_reserve(skb, self->max_header_size); - self->tx_skb = skb; - /* Remember skb size because max_data_size may - * change later on - Jean II */ - self->tx_data_size = self->max_data_size; - } - - /* Copy data */ - skb_put_data(skb, buf + len, size); - - count -= size; - len += size; - } - - spin_unlock_irqrestore(&self->spinlock, flags); - - /* - * Schedule a new thread which will transmit the frame as soon - * as possible, but at a safe point in time. We do this so the - * "user" can give us data multiple times, as PPP does (because of - * its 256 byte tx buffer). We will then defragment and send out - * all this data as one single packet. - */ - schedule_work(&self->tqueue); - - return len; -} - -/* - * Function ircomm_tty_write_room (tty) - * - * This routine returns the numbers of characters the tty driver will - * accept for queuing to be written. This number is subject to change as - * output buffers get emptied, or if the output flow control is acted. - */ -static int ircomm_tty_write_room(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned long flags; - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - -#ifdef IRCOMM_NO_TX_BEFORE_INIT - /* max_header_size tells us if the channel is initialised or not. */ - if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED) - /* Don't bother us yet */ - return 0; -#endif - - /* Check if we are allowed to transmit any data. - * hw_stopped is the regular flow control. - * Jean II */ - if (tty->hw_stopped) - ret = 0; - else { - spin_lock_irqsave(&self->spinlock, flags); - if (self->tx_skb) - ret = self->tx_data_size - self->tx_skb->len; - else - ret = self->max_data_size; - spin_unlock_irqrestore(&self->spinlock, flags); - } - pr_debug("%s(), ret=%d\n", __func__ , ret); - - return ret; -} - -/* - * Function ircomm_tty_wait_until_sent (tty, timeout) - * - * This routine waits until the device has written out all of the - * characters in its transmitter FIFO. - */ -static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned long orig_jiffies, poll_time; - unsigned long flags; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - orig_jiffies = jiffies; - - /* Set poll time to 200 ms */ - poll_time = msecs_to_jiffies(200); - if (timeout) - poll_time = min_t(unsigned long, timeout, poll_time); - - spin_lock_irqsave(&self->spinlock, flags); - while (self->tx_skb && self->tx_skb->len) { - spin_unlock_irqrestore(&self->spinlock, flags); - schedule_timeout_interruptible(poll_time); - spin_lock_irqsave(&self->spinlock, flags); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - spin_unlock_irqrestore(&self->spinlock, flags); - __set_current_state(TASK_RUNNING); -} - -/* - * Function ircomm_tty_throttle (tty) - * - * This routine notifies the tty driver that input buffers for the line - * discipline are close to full, and it should somehow signal that no - * more characters should be sent to the tty. - */ -static void ircomm_tty_throttle(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - /* Software flow control? */ - if (I_IXOFF(tty)) - ircomm_tty_send_xchar(tty, STOP_CHAR(tty)); - - /* Hardware flow control? */ - if (C_CRTSCTS(tty)) { - self->settings.dte &= ~IRCOMM_RTS; - self->settings.dte |= IRCOMM_DELTA_RTS; - - ircomm_param_request(self, IRCOMM_DTE, TRUE); - } - - ircomm_flow_request(self->ircomm, FLOW_STOP); -} - -/* - * Function ircomm_tty_unthrottle (tty) - * - * This routine notifies the tty drivers that it should signals that - * characters can now be sent to the tty without fear of overrunning the - * input buffers of the line disciplines. - */ -static void ircomm_tty_unthrottle(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - /* Using software flow control? */ - if (I_IXOFF(tty)) - ircomm_tty_send_xchar(tty, START_CHAR(tty)); - - /* Using hardware flow control? */ - if (C_CRTSCTS(tty)) { - self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS); - - ircomm_param_request(self, IRCOMM_DTE, TRUE); - pr_debug("%s(), FLOW_START\n", __func__); - } - ircomm_flow_request(self->ircomm, FLOW_START); -} - -/* - * Function ircomm_tty_chars_in_buffer (tty) - * - * Indicates if there are any data in the buffer - * - */ -static int ircomm_tty_chars_in_buffer(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned long flags; - int len = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - spin_lock_irqsave(&self->spinlock, flags); - - if (self->tx_skb) - len = self->tx_skb->len; - - spin_unlock_irqrestore(&self->spinlock, flags); - - return len; -} - -static void ircomm_tty_shutdown(struct ircomm_tty_cb *self) -{ - unsigned long flags; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - if (!tty_port_initialized(&self->port)) - return; - tty_port_set_initialized(&self->port, 0); - - ircomm_tty_detach_cable(self); - - spin_lock_irqsave(&self->spinlock, flags); - - del_timer(&self->watchdog_timer); - - /* Free parameter buffer */ - if (self->ctrl_skb) { - dev_kfree_skb(self->ctrl_skb); - self->ctrl_skb = NULL; - } - - /* Free transmit buffer */ - if (self->tx_skb) { - dev_kfree_skb(self->tx_skb); - self->tx_skb = NULL; - } - - if (self->ircomm) { - ircomm_close(self->ircomm); - self->ircomm = NULL; - } - - spin_unlock_irqrestore(&self->spinlock, flags); -} - -/* - * Function ircomm_tty_hangup (tty) - * - * This routine notifies the tty driver that it should hangup the tty - * device. - * - */ -static void ircomm_tty_hangup(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - struct tty_port *port = &self->port; - unsigned long flags; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - /* ircomm_tty_flush_buffer(tty); */ - ircomm_tty_shutdown(self); - - spin_lock_irqsave(&port->lock, flags); - if (port->tty) { - set_bit(TTY_IO_ERROR, &port->tty->flags); - tty_kref_put(port->tty); - } - port->tty = NULL; - port->count = 0; - spin_unlock_irqrestore(&port->lock, flags); - tty_port_set_active(port, 0); - - wake_up_interruptible(&port->open_wait); -} - -/* - * Function ircomm_tty_send_xchar (tty, ch) - * - * This routine is used to send a high-priority XON/XOFF character to - * the device. - */ -static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch) -{ - pr_debug("%s(), not impl\n", __func__); -} - -/* - * Function ircomm_tty_start (tty) - * - * This routine notifies the tty driver that it resume sending - * characters to the tty device. - */ -void ircomm_tty_start(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - - ircomm_flow_request(self->ircomm, FLOW_START); -} - -/* - * Function ircomm_tty_stop (tty) - * - * This routine notifies the tty driver that it should stop outputting - * characters to the tty device. - */ -static void ircomm_tty_stop(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - ircomm_flow_request(self->ircomm, FLOW_STOP); -} - -/* - * Function ircomm_check_modem_status (self) - * - * Check for any changes in the DCE's line settings. This function should - * be called whenever the dce parameter settings changes, to update the - * flow control settings and other things - */ -void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) -{ - struct tty_struct *tty; - int status; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - tty = tty_port_tty_get(&self->port); - - status = self->settings.dce; - - if (status & IRCOMM_DCE_DELTA_ANY) { - /*wake_up_interruptible(&self->delta_msr_wait);*/ - } - if (tty_port_check_carrier(&self->port) && (status & IRCOMM_DELTA_CD)) { - pr_debug("%s(), ircomm%d CD now %s...\n", __func__ , self->line, - (status & IRCOMM_CD) ? "on" : "off"); - - if (status & IRCOMM_CD) { - wake_up_interruptible(&self->port.open_wait); - } else { - pr_debug("%s(), Doing serial hangup..\n", __func__); - if (tty) - tty_hangup(tty); - - /* Hangup will remote the tty, so better break out */ - goto put; - } - } - if (tty && tty_port_cts_enabled(&self->port)) { - if (tty->hw_stopped) { - if (status & IRCOMM_CTS) { - pr_debug("%s(), CTS tx start...\n", __func__); - tty->hw_stopped = 0; - - /* Wake up processes blocked on open */ - wake_up_interruptible(&self->port.open_wait); - - schedule_work(&self->tqueue); - goto put; - } - } else { - if (!(status & IRCOMM_CTS)) { - pr_debug("%s(), CTS tx stop...\n", __func__); - tty->hw_stopped = 1; - } - } - } -put: - tty_kref_put(tty); -} - -/* - * Function ircomm_tty_data_indication (instance, sap, skb) - * - * Handle incoming data, and deliver it to the line discipline - * - */ -static int ircomm_tty_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - struct tty_struct *tty; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - tty = tty_port_tty_get(&self->port); - if (!tty) { - pr_debug("%s(), no tty!\n", __func__); - return 0; - } - - /* - * If we receive data when hardware is stopped then something is wrong. - * We try to poll the peers line settings to check if we are up todate. - * Devices like WinCE can do this, and since they don't send any - * params, we can just as well declare the hardware for running. - */ - if (tty->hw_stopped && (self->flow == FLOW_START)) { - pr_debug("%s(), polling for line settings!\n", __func__); - ircomm_param_request(self, IRCOMM_POLL, TRUE); - - /* We can just as well declare the hardware for running */ - ircomm_tty_send_initial_parameters(self); - ircomm_tty_link_established(self); - } - tty_kref_put(tty); - - /* - * Use flip buffer functions since the code may be called from interrupt - * context - */ - tty_insert_flip_string(&self->port, skb->data, skb->len); - tty_flip_buffer_push(&self->port); - - /* No need to kfree_skb - see ircomm_ttp_data_indication() */ - - return 0; -} - -/* - * Function ircomm_tty_control_indication (instance, sap, skb) - * - * Parse all incoming parameters (easy!) - * - */ -static int ircomm_tty_control_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - int clen; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - clen = skb->data[0]; - - irda_param_extract_all(self, skb->data+1, IRDA_MIN(skb->len-1, clen), - &ircomm_param_info); - - /* No need to kfree_skb - see ircomm_control_indication() */ - - return 0; -} - -/* - * Function ircomm_tty_flow_indication (instance, sap, cmd) - * - * This function is called by IrTTP when it wants us to slow down the - * transmission of data. We just mark the hardware as stopped, and wait - * for IrTTP to notify us that things are OK again. - */ -static void ircomm_tty_flow_indication(void *instance, void *sap, - LOCAL_FLOW cmd) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - struct tty_struct *tty; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - tty = tty_port_tty_get(&self->port); - - switch (cmd) { - case FLOW_START: - pr_debug("%s(), hw start!\n", __func__); - if (tty) - tty->hw_stopped = 0; - - /* ircomm_tty_do_softint will take care of the rest */ - schedule_work(&self->tqueue); - break; - default: /* If we get here, something is very wrong, better stop */ - case FLOW_STOP: - pr_debug("%s(), hw stopped!\n", __func__); - if (tty) - tty->hw_stopped = 1; - break; - } - - tty_kref_put(tty); - self->flow = cmd; -} - -#ifdef CONFIG_PROC_FS -static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m) -{ - struct tty_struct *tty; - char sep; - - seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]); - - seq_puts(m, "Service type: "); - if (self->service_type & IRCOMM_9_WIRE) - seq_puts(m, "9_WIRE"); - else if (self->service_type & IRCOMM_3_WIRE) - seq_puts(m, "3_WIRE"); - else if (self->service_type & IRCOMM_3_WIRE_RAW) - seq_puts(m, "3_WIRE_RAW"); - else - seq_puts(m, "No common service type!\n"); - seq_putc(m, '\n'); - - seq_printf(m, "Port name: %s\n", self->settings.port_name); - - seq_printf(m, "DTE status:"); - sep = ' '; - if (self->settings.dte & IRCOMM_RTS) { - seq_printf(m, "%cRTS", sep); - sep = '|'; - } - if (self->settings.dte & IRCOMM_DTR) { - seq_printf(m, "%cDTR", sep); - sep = '|'; - } - seq_putc(m, '\n'); - - seq_puts(m, "DCE status:"); - sep = ' '; - if (self->settings.dce & IRCOMM_CTS) { - seq_printf(m, "%cCTS", sep); - sep = '|'; - } - if (self->settings.dce & IRCOMM_DSR) { - seq_printf(m, "%cDSR", sep); - sep = '|'; - } - if (self->settings.dce & IRCOMM_CD) { - seq_printf(m, "%cCD", sep); - sep = '|'; - } - if (self->settings.dce & IRCOMM_RI) { - seq_printf(m, "%cRI", sep); - sep = '|'; - } - seq_putc(m, '\n'); - - seq_puts(m, "Configuration: "); - if (!self->settings.null_modem) - seq_puts(m, "DTE <-> DCE\n"); - else - seq_puts(m, "DTE <-> DTE (null modem emulation)\n"); - - seq_printf(m, "Data rate: %d\n", self->settings.data_rate); - - seq_puts(m, "Flow control:"); - sep = ' '; - if (self->settings.flow_control & IRCOMM_XON_XOFF_IN) { - seq_printf(m, "%cXON_XOFF_IN", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_XON_XOFF_OUT) { - seq_printf(m, "%cXON_XOFF_OUT", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_RTS_CTS_IN) { - seq_printf(m, "%cRTS_CTS_IN", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_RTS_CTS_OUT) { - seq_printf(m, "%cRTS_CTS_OUT", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_DSR_DTR_IN) { - seq_printf(m, "%cDSR_DTR_IN", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_DSR_DTR_OUT) { - seq_printf(m, "%cDSR_DTR_OUT", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_ENQ_ACK_IN) { - seq_printf(m, "%cENQ_ACK_IN", sep); - sep = '|'; - } - if (self->settings.flow_control & IRCOMM_ENQ_ACK_OUT) { - seq_printf(m, "%cENQ_ACK_OUT", sep); - sep = '|'; - } - seq_putc(m, '\n'); - - seq_puts(m, "Flags:"); - sep = ' '; - if (tty_port_cts_enabled(&self->port)) { - seq_printf(m, "%cASYNC_CTS_FLOW", sep); - sep = '|'; - } - if (tty_port_check_carrier(&self->port)) { - seq_printf(m, "%cASYNC_CHECK_CD", sep); - sep = '|'; - } - if (tty_port_initialized(&self->port)) { - seq_printf(m, "%cASYNC_INITIALIZED", sep); - sep = '|'; - } - if (self->port.flags & ASYNC_LOW_LATENCY) { - seq_printf(m, "%cASYNC_LOW_LATENCY", sep); - sep = '|'; - } - if (tty_port_active(&self->port)) { - seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep); - sep = '|'; - } - seq_putc(m, '\n'); - - seq_printf(m, "Role: %s\n", self->client ? "client" : "server"); - seq_printf(m, "Open count: %d\n", self->port.count); - seq_printf(m, "Max data size: %d\n", self->max_data_size); - seq_printf(m, "Max header size: %d\n", self->max_header_size); - - tty = tty_port_tty_get(&self->port); - if (tty) { - seq_printf(m, "Hardware: %s\n", - tty->hw_stopped ? "Stopped" : "Running"); - tty_kref_put(tty); - } -} - -static int ircomm_tty_proc_show(struct seq_file *m, void *v) -{ - struct ircomm_tty_cb *self; - unsigned long flags; - - spin_lock_irqsave(&ircomm_tty->hb_spinlock, flags); - - self = (struct ircomm_tty_cb *) hashbin_get_first(ircomm_tty); - while (self != NULL) { - if (self->magic != IRCOMM_TTY_MAGIC) - break; - - ircomm_tty_line_info(self, m); - self = (struct ircomm_tty_cb *) hashbin_get_next(ircomm_tty); - } - spin_unlock_irqrestore(&ircomm_tty->hb_spinlock, flags); - return 0; -} - -static int ircomm_tty_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ircomm_tty_proc_show, NULL); -} - -static const struct file_operations ircomm_tty_proc_fops = { - .owner = THIS_MODULE, - .open = ircomm_tty_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* CONFIG_PROC_FS */ - -MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); -MODULE_DESCRIPTION("IrCOMM serial TTY driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(IRCOMM_TTY_MAJOR); - -module_init(ircomm_tty_init); -module_exit(ircomm_tty_cleanup); diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c deleted file mode 100644 index 0a411019c098..000000000000 --- a/net/irda/ircomm/ircomm_tty_attach.c +++ /dev/null @@ -1,987 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_tty_attach.c - * Version: - * Description: Code for attaching the serial driver to IrCOMM - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sat Jun 5 17:42:00 1999 - * Modified at: Tue Jan 4 14:20:49 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/init.h> -#include <linux/sched.h> - -#include <net/irda/irda.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/irttp.h> -#include <net/irda/irias_object.h> -#include <net/irda/parameters.h> - -#include <net/irda/ircomm_core.h> -#include <net/irda/ircomm_param.h> -#include <net/irda/ircomm_event.h> - -#include <net/irda/ircomm_tty.h> -#include <net/irda/ircomm_tty_attach.h> - -static void ircomm_tty_ias_register(struct ircomm_tty_cb *self); -static void ircomm_tty_discovery_indication(discinfo_t *discovery, - DISCOVERY_MODE mode, - void *priv); -static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id, - struct ias_value *value, void *priv); -static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self, - int timeout); -static void ircomm_tty_watchdog_timer_expired(void *data); - -static int ircomm_tty_state_idle(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info); -static int ircomm_tty_state_search(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info); -static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info); -static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info); -static int ircomm_tty_state_setup(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info); -static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info); - -const char *const ircomm_tty_state[] = { - "IRCOMM_TTY_IDLE", - "IRCOMM_TTY_SEARCH", - "IRCOMM_TTY_QUERY_PARAMETERS", - "IRCOMM_TTY_QUERY_LSAP_SEL", - "IRCOMM_TTY_SETUP", - "IRCOMM_TTY_READY", - "*** ERROR *** ", -}; - -static const char *const ircomm_tty_event[] __maybe_unused = { - "IRCOMM_TTY_ATTACH_CABLE", - "IRCOMM_TTY_DETACH_CABLE", - "IRCOMM_TTY_DATA_REQUEST", - "IRCOMM_TTY_DATA_INDICATION", - "IRCOMM_TTY_DISCOVERY_REQUEST", - "IRCOMM_TTY_DISCOVERY_INDICATION", - "IRCOMM_TTY_CONNECT_CONFIRM", - "IRCOMM_TTY_CONNECT_INDICATION", - "IRCOMM_TTY_DISCONNECT_REQUEST", - "IRCOMM_TTY_DISCONNECT_INDICATION", - "IRCOMM_TTY_WD_TIMER_EXPIRED", - "IRCOMM_TTY_GOT_PARAMETERS", - "IRCOMM_TTY_GOT_LSAPSEL", - "*** ERROR ****", -}; - -static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event, - struct sk_buff *skb, struct ircomm_tty_info *info) = -{ - ircomm_tty_state_idle, - ircomm_tty_state_search, - ircomm_tty_state_query_parameters, - ircomm_tty_state_query_lsap_sel, - ircomm_tty_state_setup, - ircomm_tty_state_ready, -}; - -/* - * Function ircomm_tty_attach_cable (driver) - * - * Try to attach cable (IrCOMM link). This function will only return - * when the link has been connected, or if an error condition occurs. - * If success, the return value is the resulting service type. - */ -int ircomm_tty_attach_cable(struct ircomm_tty_cb *self) -{ - struct tty_struct *tty; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - /* Check if somebody has already connected to us */ - if (ircomm_is_connected(self->ircomm)) { - pr_debug("%s(), already connected!\n", __func__); - return 0; - } - - /* Make sure nobody tries to write before the link is up */ - tty = tty_port_tty_get(&self->port); - if (tty) { - tty->hw_stopped = 1; - tty_kref_put(tty); - } - - ircomm_tty_ias_register(self); - - ircomm_tty_do_event(self, IRCOMM_TTY_ATTACH_CABLE, NULL, NULL); - - return 0; -} - -/* - * Function ircomm_detach_cable (driver) - * - * Detach cable, or cable has been detached by peer - * - */ -void ircomm_tty_detach_cable(struct ircomm_tty_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - del_timer(&self->watchdog_timer); - - /* Remove discovery handler */ - if (self->ckey) { - irlmp_unregister_client(self->ckey); - self->ckey = NULL; - } - /* Remove IrCOMM hint bits */ - if (self->skey) { - irlmp_unregister_service(self->skey); - self->skey = NULL; - } - - if (self->iriap) { - iriap_close(self->iriap); - self->iriap = NULL; - } - - /* Remove LM-IAS object */ - if (self->obj) { - irias_delete_object(self->obj); - self->obj = NULL; - } - - ircomm_tty_do_event(self, IRCOMM_TTY_DETACH_CABLE, NULL, NULL); - - /* Reset some values */ - self->daddr = self->saddr = 0; - self->dlsap_sel = self->slsap_sel = 0; - - memset(&self->settings, 0, sizeof(struct ircomm_params)); -} - -/* - * Function ircomm_tty_ias_register (self) - * - * Register with LM-IAS depending on which service type we are - * - */ -static void ircomm_tty_ias_register(struct ircomm_tty_cb *self) -{ - __u8 oct_seq[6]; - __u16 hints; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - /* Compute hint bits based on service */ - hints = irlmp_service_to_hint(S_COMM); - if (self->service_type & IRCOMM_3_WIRE_RAW) - hints |= irlmp_service_to_hint(S_PRINTER); - - /* Advertise IrCOMM hint bit in discovery */ - if (!self->skey) - self->skey = irlmp_register_service(hints); - /* Set up a discovery handler */ - if (!self->ckey) - self->ckey = irlmp_register_client(hints, - ircomm_tty_discovery_indication, - NULL, (void *) self); - - /* If already done, no need to do it again */ - if (self->obj) - return; - - if (self->service_type & IRCOMM_3_WIRE_RAW) { - /* Register IrLPT with LM-IAS */ - self->obj = irias_new_object("IrLPT", IAS_IRLPT_ID); - irias_add_integer_attrib(self->obj, "IrDA:IrLMP:LsapSel", - self->slsap_sel, IAS_KERNEL_ATTR); - } else { - /* Register IrCOMM with LM-IAS */ - self->obj = irias_new_object("IrDA:IrCOMM", IAS_IRCOMM_ID); - irias_add_integer_attrib(self->obj, "IrDA:TinyTP:LsapSel", - self->slsap_sel, IAS_KERNEL_ATTR); - - /* Code the parameters into the buffer */ - irda_param_pack(oct_seq, "bbbbbb", - IRCOMM_SERVICE_TYPE, 1, self->service_type, - IRCOMM_PORT_TYPE, 1, IRCOMM_SERIAL); - - /* Register parameters with LM-IAS */ - irias_add_octseq_attrib(self->obj, "Parameters", oct_seq, 6, - IAS_KERNEL_ATTR); - } - irias_insert_object(self->obj); -} - -/* - * Function ircomm_tty_ias_unregister (self) - * - * Remove our IAS object and client hook while connected. - * - */ -static void ircomm_tty_ias_unregister(struct ircomm_tty_cb *self) -{ - /* Remove LM-IAS object now so it is not reused. - * IrCOMM deals very poorly with multiple incoming connections. - * It should looks a lot more like IrNET, and "dup" a server TSAP - * to the application TSAP (based on various rules). - * This is a cheap workaround allowing multiple clients to - * connect to us. It will not always work. - * Each IrCOMM socket has an IAS entry. Incoming connection will - * pick the first one found. So, when we are fully connected, - * we remove our IAS entries so that the next IAS entry is used. - * We do that for *both* client and server, because a server - * can also create client instances. - * Jean II */ - if (self->obj) { - irias_delete_object(self->obj); - self->obj = NULL; - } - -#if 0 - /* Remove discovery handler. - * While we are connected, we no longer need to receive - * discovery events. This would be the case if there is - * multiple IrLAP interfaces. Jean II */ - if (self->ckey) { - irlmp_unregister_client(self->ckey); - self->ckey = NULL; - } -#endif -} - -/* - * Function ircomm_send_initial_parameters (self) - * - * Send initial parameters to the remote IrCOMM device. These parameters - * must be sent before any data. - */ -int ircomm_tty_send_initial_parameters(struct ircomm_tty_cb *self) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (self->service_type & IRCOMM_3_WIRE_RAW) - return 0; - - /* - * Set default values, but only if the application for some reason - * haven't set them already - */ - pr_debug("%s(), data-rate = %d\n", __func__ , - self->settings.data_rate); - if (!self->settings.data_rate) - self->settings.data_rate = 9600; - pr_debug("%s(), data-format = %d\n", __func__ , - self->settings.data_format); - if (!self->settings.data_format) - self->settings.data_format = IRCOMM_WSIZE_8; /* 8N1 */ - - pr_debug("%s(), flow-control = %d\n", __func__ , - self->settings.flow_control); - /*self->settings.flow_control = IRCOMM_RTS_CTS_IN|IRCOMM_RTS_CTS_OUT;*/ - - /* Do not set delta values for the initial parameters */ - self->settings.dte = IRCOMM_DTR | IRCOMM_RTS; - - /* Only send service type parameter when we are the client */ - if (self->client) - ircomm_param_request(self, IRCOMM_SERVICE_TYPE, FALSE); - ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE); - ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE); - - /* For a 3 wire service, we just flush the last parameter and return */ - if (self->settings.service_type == IRCOMM_3_WIRE) { - ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE); - return 0; - } - - /* Only 9-wire service types continue here */ - ircomm_param_request(self, IRCOMM_FLOW_CONTROL, FALSE); -#if 0 - ircomm_param_request(self, IRCOMM_XON_XOFF, FALSE); - ircomm_param_request(self, IRCOMM_ENQ_ACK, FALSE); -#endif - /* Notify peer that we are ready to receive data */ - ircomm_param_request(self, IRCOMM_DTE, TRUE); - - return 0; -} - -/* - * Function ircomm_tty_discovery_indication (discovery) - * - * Remote device is discovered, try query the remote IAS to see which - * device it is, and which services it has. - * - */ -static void ircomm_tty_discovery_indication(discinfo_t *discovery, - DISCOVERY_MODE mode, - void *priv) -{ - struct ircomm_tty_cb *self; - struct ircomm_tty_info info; - - /* Important note : - * We need to drop all passive discoveries. - * The LSAP management of IrComm is deficient and doesn't deal - * with the case of two instance connecting to each other - * simultaneously (it will deadlock in LMP). - * The proper fix would be to use the same technique as in IrNET, - * to have one server socket and separate instances for the - * connecting/connected socket. - * The workaround is to drop passive discovery, which drastically - * reduce the probability of this happening. - * Jean II */ - if(mode == DISCOVERY_PASSIVE) - return; - - info.daddr = discovery->daddr; - info.saddr = discovery->saddr; - - self = priv; - ircomm_tty_do_event(self, IRCOMM_TTY_DISCOVERY_INDICATION, - NULL, &info); -} - -/* - * Function ircomm_tty_disconnect_indication (instance, sap, reason, skb) - * - * Link disconnected - * - */ -void ircomm_tty_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *skb) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - struct tty_struct *tty; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - tty = tty_port_tty_get(&self->port); - if (!tty) - return; - - /* This will stop control data transfers */ - self->flow = FLOW_STOP; - - /* Stop data transfers */ - tty->hw_stopped = 1; - - ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL, - NULL); - tty_kref_put(tty); -} - -/* - * Function ircomm_tty_getvalue_confirm (result, obj_id, value, priv) - * - * Got result from the IAS query we make - * - */ -static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id, - struct ias_value *value, - void *priv) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) priv; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - /* We probably don't need to make any more queries */ - iriap_close(self->iriap); - self->iriap = NULL; - - /* Check if request succeeded */ - if (result != IAS_SUCCESS) { - pr_debug("%s(), got NULL value!\n", __func__); - return; - } - - switch (value->type) { - case IAS_OCT_SEQ: - pr_debug("%s(), got octet sequence\n", __func__); - - irda_param_extract_all(self, value->t.oct_seq, value->len, - &ircomm_param_info); - - ircomm_tty_do_event(self, IRCOMM_TTY_GOT_PARAMETERS, NULL, - NULL); - break; - case IAS_INTEGER: - /* Got LSAP selector */ - pr_debug("%s(), got lsapsel = %d\n", __func__ , - value->t.integer); - - if (value->t.integer == -1) { - pr_debug("%s(), invalid value!\n", __func__); - } else - self->dlsap_sel = value->t.integer; - - ircomm_tty_do_event(self, IRCOMM_TTY_GOT_LSAPSEL, NULL, NULL); - break; - case IAS_MISSING: - pr_debug("%s(), got IAS_MISSING\n", __func__); - break; - default: - pr_debug("%s(), got unknown type!\n", __func__); - break; - } - irias_delete_value(value); -} - -/* - * Function ircomm_tty_connect_confirm (instance, sap, qos, max_sdu_size, skb) - * - * Connection confirmed - * - */ -void ircomm_tty_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_data_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - self->client = TRUE; - self->max_data_size = max_data_size; - self->max_header_size = max_header_size; - self->flow = FLOW_START; - - ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_CONFIRM, NULL, NULL); - - /* No need to kfree_skb - see ircomm_ttp_connect_confirm() */ -} - -/* - * Function ircomm_tty_connect_indication (instance, sap, qos, max_sdu_size, - * skb) - * - * we are discovered and being requested to connect by remote device ! - * - */ -void ircomm_tty_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_data_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; - int clen; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - self->client = FALSE; - self->max_data_size = max_data_size; - self->max_header_size = max_header_size; - self->flow = FLOW_START; - - clen = skb->data[0]; - if (clen) - irda_param_extract_all(self, skb->data+1, - IRDA_MIN(skb->len, clen), - &ircomm_param_info); - - ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_INDICATION, NULL, NULL); - - /* No need to kfree_skb - see ircomm_ttp_connect_indication() */ -} - -/* - * Function ircomm_tty_link_established (self) - * - * Called when the IrCOMM link is established - * - */ -void ircomm_tty_link_established(struct ircomm_tty_cb *self) -{ - struct tty_struct *tty; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - tty = tty_port_tty_get(&self->port); - if (!tty) - return; - - del_timer(&self->watchdog_timer); - - /* - * IrCOMM link is now up, and if we are not using hardware - * flow-control, then declare the hardware as running. Otherwise we - * will have to wait for the peer device (DCE) to raise the CTS - * line. - */ - if (tty_port_cts_enabled(&self->port) && - ((self->settings.dce & IRCOMM_CTS) == 0)) { - pr_debug("%s(), waiting for CTS ...\n", __func__); - goto put; - } else { - pr_debug("%s(), starting hardware!\n", __func__); - - tty->hw_stopped = 0; - - /* Wake up processes blocked on open */ - wake_up_interruptible(&self->port.open_wait); - } - - schedule_work(&self->tqueue); -put: - tty_kref_put(tty); -} - -/* - * Function ircomm_tty_start_watchdog_timer (self, timeout) - * - * Start the watchdog timer. This timer is used to make sure that any - * connection attempt is successful, and if not, we will retry after - * the timeout - */ -static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self, - int timeout) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - irda_start_timer(&self->watchdog_timer, timeout, (void *) self, - ircomm_tty_watchdog_timer_expired); -} - -/* - * Function ircomm_tty_watchdog_timer_expired (data) - * - * Called when the connect procedure have taken to much time. - * - */ -static void ircomm_tty_watchdog_timer_expired(void *data) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - ircomm_tty_do_event(self, IRCOMM_TTY_WD_TIMER_EXPIRED, NULL, NULL); -} - - -/* - * Function ircomm_tty_do_event (self, event, skb) - * - * Process event - * - */ -int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event, - struct sk_buff *skb, struct ircomm_tty_info *info) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_tty_state[self->state], ircomm_tty_event[event]); - - return (*state[self->state])(self, event, skb, info); -} - -/* - * Function ircomm_tty_next_state (self, state) - * - * Switch state - * - */ -static inline void ircomm_tty_next_state(struct ircomm_tty_cb *self, IRCOMM_TTY_STATE state) -{ - /* - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); - - pr_debug("%s: next state=%s, service type=%d\n", __func__ , - ircomm_tty_state[self->state], self->service_type); - */ - self->state = state; -} - -/* - * Function ircomm_tty_state_idle (self, event, skb, info) - * - * Just hanging around - * - */ -static int ircomm_tty_state_idle(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info) -{ - int ret = 0; - - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_tty_state[self->state], ircomm_tty_event[event]); - switch (event) { - case IRCOMM_TTY_ATTACH_CABLE: - /* Try to discover any remote devices */ - ircomm_tty_start_watchdog_timer(self, 3*HZ); - ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); - - irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); - break; - case IRCOMM_TTY_DISCOVERY_INDICATION: - self->daddr = info->daddr; - self->saddr = info->saddr; - - if (self->iriap) { - net_warn_ratelimited("%s(), busy with a previous query\n", - __func__); - return -EBUSY; - } - - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - ircomm_tty_getvalue_confirm); - - iriap_getvaluebyclass_request(self->iriap, - self->saddr, self->daddr, - "IrDA:IrCOMM", "Parameters"); - - ircomm_tty_start_watchdog_timer(self, 3*HZ); - ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS); - break; - case IRCOMM_TTY_CONNECT_INDICATION: - del_timer(&self->watchdog_timer); - - /* Accept connection */ - ircomm_connect_response(self->ircomm, NULL); - ircomm_tty_next_state(self, IRCOMM_TTY_READY); - break; - case IRCOMM_TTY_WD_TIMER_EXPIRED: - /* Just stay idle */ - break; - case IRCOMM_TTY_DETACH_CABLE: - ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_tty_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_tty_state_search (self, event, skb, info) - * - * Trying to discover an IrCOMM device - * - */ -static int ircomm_tty_state_search(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info) -{ - int ret = 0; - - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_tty_state[self->state], ircomm_tty_event[event]); - - switch (event) { - case IRCOMM_TTY_DISCOVERY_INDICATION: - self->daddr = info->daddr; - self->saddr = info->saddr; - - if (self->iriap) { - net_warn_ratelimited("%s(), busy with a previous query\n", - __func__); - return -EBUSY; - } - - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - ircomm_tty_getvalue_confirm); - - if (self->service_type == IRCOMM_3_WIRE_RAW) { - iriap_getvaluebyclass_request(self->iriap, self->saddr, - self->daddr, "IrLPT", - "IrDA:IrLMP:LsapSel"); - ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL); - } else { - iriap_getvaluebyclass_request(self->iriap, self->saddr, - self->daddr, - "IrDA:IrCOMM", - "Parameters"); - - ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS); - } - ircomm_tty_start_watchdog_timer(self, 3*HZ); - break; - case IRCOMM_TTY_CONNECT_INDICATION: - del_timer(&self->watchdog_timer); - ircomm_tty_ias_unregister(self); - - /* Accept connection */ - ircomm_connect_response(self->ircomm, NULL); - ircomm_tty_next_state(self, IRCOMM_TTY_READY); - break; - case IRCOMM_TTY_WD_TIMER_EXPIRED: -#if 1 - /* Give up */ -#else - /* Try to discover any remote devices */ - ircomm_tty_start_watchdog_timer(self, 3*HZ); - irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); -#endif - break; - case IRCOMM_TTY_DETACH_CABLE: - ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_tty_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_tty_state_query (self, event, skb, info) - * - * Querying the remote LM-IAS for IrCOMM parameters - * - */ -static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info) -{ - int ret = 0; - - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_tty_state[self->state], ircomm_tty_event[event]); - - switch (event) { - case IRCOMM_TTY_GOT_PARAMETERS: - if (self->iriap) { - net_warn_ratelimited("%s(), busy with a previous query\n", - __func__); - return -EBUSY; - } - - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - ircomm_tty_getvalue_confirm); - - iriap_getvaluebyclass_request(self->iriap, self->saddr, - self->daddr, "IrDA:IrCOMM", - "IrDA:TinyTP:LsapSel"); - - ircomm_tty_start_watchdog_timer(self, 3*HZ); - ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL); - break; - case IRCOMM_TTY_WD_TIMER_EXPIRED: - /* Go back to search mode */ - ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); - ircomm_tty_start_watchdog_timer(self, 3*HZ); - break; - case IRCOMM_TTY_CONNECT_INDICATION: - del_timer(&self->watchdog_timer); - ircomm_tty_ias_unregister(self); - - /* Accept connection */ - ircomm_connect_response(self->ircomm, NULL); - ircomm_tty_next_state(self, IRCOMM_TTY_READY); - break; - case IRCOMM_TTY_DETACH_CABLE: - ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_tty_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_tty_state_query_lsap_sel (self, event, skb, info) - * - * Query remote LM-IAS for the LSAP selector which we can connect to - * - */ -static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info) -{ - int ret = 0; - - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_tty_state[self->state], ircomm_tty_event[event]); - - switch (event) { - case IRCOMM_TTY_GOT_LSAPSEL: - /* Connect to remote device */ - ret = ircomm_connect_request(self->ircomm, self->dlsap_sel, - self->saddr, self->daddr, - NULL, self->service_type); - ircomm_tty_start_watchdog_timer(self, 3*HZ); - ircomm_tty_next_state(self, IRCOMM_TTY_SETUP); - break; - case IRCOMM_TTY_WD_TIMER_EXPIRED: - /* Go back to search mode */ - ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); - ircomm_tty_start_watchdog_timer(self, 3*HZ); - break; - case IRCOMM_TTY_CONNECT_INDICATION: - del_timer(&self->watchdog_timer); - ircomm_tty_ias_unregister(self); - - /* Accept connection */ - ircomm_connect_response(self->ircomm, NULL); - ircomm_tty_next_state(self, IRCOMM_TTY_READY); - break; - case IRCOMM_TTY_DETACH_CABLE: - ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_tty_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_tty_state_setup (self, event, skb, info) - * - * Trying to connect - * - */ -static int ircomm_tty_state_setup(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info) -{ - int ret = 0; - - pr_debug("%s: state=%s, event=%s\n", __func__ , - ircomm_tty_state[self->state], ircomm_tty_event[event]); - - switch (event) { - case IRCOMM_TTY_CONNECT_CONFIRM: - del_timer(&self->watchdog_timer); - ircomm_tty_ias_unregister(self); - - /* - * Send initial parameters. This will also send out queued - * parameters waiting for the connection to come up - */ - ircomm_tty_send_initial_parameters(self); - ircomm_tty_link_established(self); - ircomm_tty_next_state(self, IRCOMM_TTY_READY); - break; - case IRCOMM_TTY_CONNECT_INDICATION: - del_timer(&self->watchdog_timer); - ircomm_tty_ias_unregister(self); - - /* Accept connection */ - ircomm_connect_response(self->ircomm, NULL); - ircomm_tty_next_state(self, IRCOMM_TTY_READY); - break; - case IRCOMM_TTY_WD_TIMER_EXPIRED: - /* Go back to search mode */ - ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); - ircomm_tty_start_watchdog_timer(self, 3*HZ); - break; - case IRCOMM_TTY_DETACH_CABLE: - /* ircomm_disconnect_request(self->ircomm, NULL); */ - ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_tty_event[event]); - ret = -EINVAL; - } - return ret; -} - -/* - * Function ircomm_tty_state_ready (self, event, skb, info) - * - * IrCOMM is now connected - * - */ -static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, - IRCOMM_TTY_EVENT event, - struct sk_buff *skb, - struct ircomm_tty_info *info) -{ - int ret = 0; - - switch (event) { - case IRCOMM_TTY_DATA_REQUEST: - ret = ircomm_data_request(self->ircomm, skb); - break; - case IRCOMM_TTY_DETACH_CABLE: - ircomm_disconnect_request(self->ircomm, NULL); - ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); - break; - case IRCOMM_TTY_DISCONNECT_INDICATION: - ircomm_tty_ias_register(self); - ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); - ircomm_tty_start_watchdog_timer(self, 3*HZ); - - if (tty_port_check_carrier(&self->port)) { - /* Drop carrier */ - self->settings.dce = IRCOMM_DELTA_CD; - ircomm_tty_check_modem_status(self); - } else { - pr_debug("%s(), hanging up!\n", __func__); - tty_port_tty_hangup(&self->port, false); - } - break; - default: - pr_debug("%s(), unknown event: %s\n", __func__ , - ircomm_tty_event[event]); - ret = -EINVAL; - } - return ret; -} - diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c deleted file mode 100644 index 171c3dee760e..000000000000 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ /dev/null @@ -1,291 +0,0 @@ -/********************************************************************* - * - * Filename: ircomm_tty_ioctl.c - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Thu Jun 10 14:39:09 1999 - * Modified at: Wed Jan 5 14:45:43 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/termios.h> -#include <linux/tty.h> -#include <linux/serial.h> - -#include <linux/uaccess.h> - -#include <net/irda/irda.h> -#include <net/irda/irmod.h> - -#include <net/irda/ircomm_core.h> -#include <net/irda/ircomm_param.h> -#include <net/irda/ircomm_tty_attach.h> -#include <net/irda/ircomm_tty.h> - -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -/* - * Function ircomm_tty_change_speed (driver) - * - * Change speed of the driver. If the remote device is a DCE, then this - * should make it change the speed of its serial port - */ -static void ircomm_tty_change_speed(struct ircomm_tty_cb *self, - struct tty_struct *tty) -{ - unsigned int cflag, cval; - int baud; - - if (!self->ircomm) - return; - - cflag = tty->termios.c_cflag; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: cval = IRCOMM_WSIZE_5; break; - case CS6: cval = IRCOMM_WSIZE_6; break; - case CS7: cval = IRCOMM_WSIZE_7; break; - case CS8: cval = IRCOMM_WSIZE_8; break; - default: cval = IRCOMM_WSIZE_5; break; - } - if (cflag & CSTOPB) - cval |= IRCOMM_2_STOP_BIT; - - if (cflag & PARENB) - cval |= IRCOMM_PARITY_ENABLE; - if (!(cflag & PARODD)) - cval |= IRCOMM_PARITY_EVEN; - - /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(tty); - if (!baud) - baud = 9600; /* B0 transition handled in rs_set_termios */ - - self->settings.data_rate = baud; - ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE); - - /* CTS flow control flag and modem status interrupts */ - tty_port_set_cts_flow(&self->port, cflag & CRTSCTS); - if (cflag & CRTSCTS) { - self->settings.flow_control |= IRCOMM_RTS_CTS_IN; - /* This got me. Bummer. Jean II */ - if (self->service_type == IRCOMM_3_WIRE_RAW) - net_warn_ratelimited("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", - __func__); - } else { - self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN; - } - tty_port_set_check_carrier(&self->port, ~cflag & CLOCAL); - - self->settings.data_format = cval; - - ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE); - ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE); -} - -/* - * Function ircomm_tty_set_termios (tty, old_termios) - * - * This routine allows the tty driver to be notified when device's - * termios settings have changed. Note that a well-designed tty driver - * should be prepared to accept the case where old == NULL, and try to - * do something rational. - */ -void ircomm_tty_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned int cflag = tty->termios.c_cflag; - - if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(tty->termios.c_iflag) == - RELEVANT_IFLAG(old_termios->c_iflag))) - { - return; - } - - ircomm_tty_change_speed(self, tty); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) { - self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS); - ircomm_param_request(self, IRCOMM_DTE, TRUE); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { - self->settings.dte |= IRCOMM_DTR; - if (!C_CRTSCTS(tty) || !tty_throttled(tty)) - self->settings.dte |= IRCOMM_RTS; - ircomm_param_request(self, IRCOMM_DTE, TRUE); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) - { - tty->hw_stopped = 0; - ircomm_tty_start(tty); - } -} - -/* - * Function ircomm_tty_tiocmget (tty) - * - * - * - */ -int ircomm_tty_tiocmget(struct tty_struct *tty) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - unsigned int result; - - if (tty_io_error(tty)) - return -EIO; - - result = ((self->settings.dte & IRCOMM_RTS) ? TIOCM_RTS : 0) - | ((self->settings.dte & IRCOMM_DTR) ? TIOCM_DTR : 0) - | ((self->settings.dce & IRCOMM_CD) ? TIOCM_CAR : 0) - | ((self->settings.dce & IRCOMM_RI) ? TIOCM_RNG : 0) - | ((self->settings.dce & IRCOMM_DSR) ? TIOCM_DSR : 0) - | ((self->settings.dce & IRCOMM_CTS) ? TIOCM_CTS : 0); - return result; -} - -/* - * Function ircomm_tty_tiocmset (tty, set, clear) - * - * - * - */ -int ircomm_tty_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - - if (tty_io_error(tty)) - return -EIO; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); - - if (set & TIOCM_RTS) - self->settings.dte |= IRCOMM_RTS; - if (set & TIOCM_DTR) - self->settings.dte |= IRCOMM_DTR; - - if (clear & TIOCM_RTS) - self->settings.dte &= ~IRCOMM_RTS; - if (clear & TIOCM_DTR) - self->settings.dte &= ~IRCOMM_DTR; - - if ((set|clear) & TIOCM_RTS) - self->settings.dte |= IRCOMM_DELTA_RTS; - if ((set|clear) & TIOCM_DTR) - self->settings.dte |= IRCOMM_DELTA_DTR; - - ircomm_param_request(self, IRCOMM_DTE, TRUE); - - return 0; -} - -/* - * Function get_serial_info (driver, retinfo) - * - * - * - */ -static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self, - struct serial_struct __user *retinfo) -{ - struct serial_struct info; - - memset(&info, 0, sizeof(info)); - info.line = self->line; - info.flags = self->port.flags; - info.baud_base = self->settings.data_rate; - info.close_delay = self->port.close_delay; - info.closing_wait = self->port.closing_wait; - - /* For compatibility */ - info.type = PORT_16550A; - - if (copy_to_user(retinfo, &info, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -/* - * Function set_serial_info (driver, new_info) - * - * - * - */ -static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self, - struct serial_struct __user *new_info) -{ - return 0; -} - -/* - * Function ircomm_tty_ioctl (tty, cmd, arg) - * - * - * - */ -int ircomm_tty_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; - int ret = 0; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { - if (tty_io_error(tty)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - ret = ircomm_tty_get_serial_info(self, (struct serial_struct __user *) arg); - break; - case TIOCSSERIAL: - ret = ircomm_tty_set_serial_info(self, (struct serial_struct __user *) arg); - break; - case TIOCMIWAIT: - pr_debug("(), TIOCMIWAIT, not impl!\n"); - break; - - case TIOCGICOUNT: - pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__); - return 0; - default: - ret = -ENOIOCTLCMD; /* ioctls which we must ignore */ - } - return ret; -} - - - diff --git a/net/irda/irda_device.c b/net/irda/irda_device.c deleted file mode 100644 index 890b90d055d5..000000000000 --- a/net/irda/irda_device.c +++ /dev/null @@ -1,316 +0,0 @@ -/********************************************************************* - * - * Filename: irda_device.c - * Version: 0.9 - * Description: Utility functions used by the device drivers - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sat Oct 9 09:22:27 1999 - * Modified at: Sun Jan 23 17:41:24 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/skbuff.h> -#include <linux/capability.h> -#include <linux/if.h> -#include <linux/if_ether.h> -#include <linux/if_arp.h> -#include <linux/netdevice.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/kmod.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include <asm/ioctls.h> -#include <linux/uaccess.h> -#include <asm/dma.h> -#include <asm/io.h> - -#include <net/irda/irda_device.h> -#include <net/irda/irlap.h> -#include <net/irda/timer.h> -#include <net/irda/wrapper.h> - -static void __irda_task_delete(struct irda_task *task); - -static hashbin_t *dongles = NULL; -static hashbin_t *tasks = NULL; - -static void irda_task_timer_expired(void *data); - -int __init irda_device_init( void) -{ - dongles = hashbin_new(HB_NOLOCK); - if (dongles == NULL) { - net_warn_ratelimited("IrDA: Can't allocate dongles hashbin!\n"); - return -ENOMEM; - } - spin_lock_init(&dongles->hb_spinlock); - - tasks = hashbin_new(HB_LOCK); - if (tasks == NULL) { - net_warn_ratelimited("IrDA: Can't allocate tasks hashbin!\n"); - hashbin_delete(dongles, NULL); - return -ENOMEM; - } - - /* We no longer initialise the driver ourselves here, we let - * the system do it for us... - Jean II */ - - return 0; -} - -static void leftover_dongle(void *arg) -{ - struct dongle_reg *reg = arg; - net_warn_ratelimited("IrDA: Dongle type %x not unregistered\n", - reg->type); -} - -void irda_device_cleanup(void) -{ - hashbin_delete(tasks, (FREE_FUNC) __irda_task_delete); - - hashbin_delete(dongles, leftover_dongle); -} - -/* - * Function irda_device_set_media_busy (self, status) - * - * Called when we have detected that another station is transmitting - * in contention mode. - */ -void irda_device_set_media_busy(struct net_device *dev, int status) -{ - struct irlap_cb *self; - - pr_debug("%s(%s)\n", __func__, status ? "TRUE" : "FALSE"); - - self = (struct irlap_cb *) dev->atalk_ptr; - - /* Some drivers may enable the receive interrupt before calling - * irlap_open(), or they may disable the receive interrupt - * after calling irlap_close(). - * The IrDA stack is protected from this in irlap_driver_rcv(). - * However, the driver calls directly the wrapper, that calls - * us directly. Make sure we protect ourselves. - * Jean II */ - if (!self || self->magic != LAP_MAGIC) - return; - - if (status) { - self->media_busy = TRUE; - if (status == SMALL) - irlap_start_mbusy_timer(self, SMALLBUSY_TIMEOUT); - else - irlap_start_mbusy_timer(self, MEDIABUSY_TIMEOUT); - pr_debug("Media busy!\n"); - } else { - self->media_busy = FALSE; - irlap_stop_mbusy_timer(self); - } -} -EXPORT_SYMBOL(irda_device_set_media_busy); - - -/* - * Function irda_device_is_receiving (dev) - * - * Check if the device driver is currently receiving data - * - */ -int irda_device_is_receiving(struct net_device *dev) -{ - struct if_irda_req req; - int ret; - - if (!dev->netdev_ops->ndo_do_ioctl) { - net_err_ratelimited("%s: do_ioctl not impl. by device driver\n", - __func__); - return -1; - } - - ret = (dev->netdev_ops->ndo_do_ioctl)(dev, (struct ifreq *) &req, - SIOCGRECEIVING); - if (ret < 0) - return ret; - - return req.ifr_receiving; -} - -static void __irda_task_delete(struct irda_task *task) -{ - del_timer(&task->timer); - - kfree(task); -} - -static void irda_task_delete(struct irda_task *task) -{ - /* Unregister task */ - hashbin_remove(tasks, (long) task, NULL); - - __irda_task_delete(task); -} - -/* - * Function irda_task_kick (task) - * - * Tries to execute a task possible multiple times until the task is either - * finished, or askes for a timeout. When a task is finished, we do post - * processing, and notify the parent task, that is waiting for this task - * to complete. - */ -static int irda_task_kick(struct irda_task *task) -{ - int finished = TRUE; - int count = 0; - int timeout; - - IRDA_ASSERT(task != NULL, return -1;); - IRDA_ASSERT(task->magic == IRDA_TASK_MAGIC, return -1;); - - /* Execute task until it's finished, or askes for a timeout */ - do { - timeout = task->function(task); - if (count++ > 100) { - net_err_ratelimited("%s: error in task handler!\n", - __func__); - irda_task_delete(task); - return TRUE; - } - } while ((timeout == 0) && (task->state != IRDA_TASK_DONE)); - - if (timeout < 0) { - net_err_ratelimited("%s: Error executing task!\n", __func__); - irda_task_delete(task); - return TRUE; - } - - /* Check if we are finished */ - if (task->state == IRDA_TASK_DONE) { - del_timer(&task->timer); - - /* Do post processing */ - if (task->finished) - task->finished(task); - - /* Notify parent */ - if (task->parent) { - /* Check if parent is waiting for us to complete */ - if (task->parent->state == IRDA_TASK_CHILD_WAIT) { - task->parent->state = IRDA_TASK_CHILD_DONE; - - /* Stop timer now that we are here */ - del_timer(&task->parent->timer); - - /* Kick parent task */ - irda_task_kick(task->parent); - } - } - irda_task_delete(task); - } else if (timeout > 0) { - irda_start_timer(&task->timer, timeout, (void *) task, - irda_task_timer_expired); - finished = FALSE; - } else { - pr_debug("%s(), not finished, and no timeout!\n", - __func__); - finished = FALSE; - } - - return finished; -} - -/* - * Function irda_task_timer_expired (data) - * - * Task time has expired. We now try to execute task (again), and restart - * the timer if the task has not finished yet - */ -static void irda_task_timer_expired(void *data) -{ - struct irda_task *task; - - task = data; - - irda_task_kick(task); -} - -/* - * Function irda_device_setup (dev) - * - * This function should be used by low level device drivers in a similar way - * as ether_setup() is used by normal network device drivers - */ -static void irda_device_setup(struct net_device *dev) -{ - dev->hard_header_len = 0; - dev->addr_len = LAP_ALEN; - - dev->type = ARPHRD_IRDA; - dev->tx_queue_len = 8; /* Window size + 1 s-frame */ - - memset(dev->broadcast, 0xff, LAP_ALEN); - - dev->mtu = 2048; - dev->flags = IFF_NOARP; -} - -/* - * Funciton alloc_irdadev - * Allocates and sets up an IRDA device in a manner similar to - * alloc_etherdev. - */ -struct net_device *alloc_irdadev(int sizeof_priv) -{ - return alloc_netdev(sizeof_priv, "irda%d", NET_NAME_UNKNOWN, - irda_device_setup); -} -EXPORT_SYMBOL(alloc_irdadev); - -#ifdef CONFIG_ISA_DMA_API -/* - * Function setup_dma (idev, buffer, count, mode) - * - * Setup the DMA channel. Commonly used by LPC FIR drivers - * - */ -void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode) -{ - unsigned long flags; - - flags = claim_dma_lock(); - - disable_dma(channel); - clear_dma_ff(channel); - set_dma_mode(channel, mode); - set_dma_addr(channel, buffer); - set_dma_count(channel, count); - enable_dma(channel); - - release_dma_lock(flags); -} -EXPORT_SYMBOL(irda_setup_dma); -#endif diff --git a/net/irda/iriap.c b/net/irda/iriap.c deleted file mode 100644 index 1138eaf5c682..000000000000 --- a/net/irda/iriap.c +++ /dev/null @@ -1,1085 +0,0 @@ -/********************************************************************* - * - * Filename: iriap.c - * Version: 0.8 - * Description: Information Access Protocol (IAP) - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Thu Aug 21 00:02:07 1997 - * Modified at: Sat Dec 25 16:42:42 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/skbuff.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/seq_file.h> -#include <linux/slab.h> - -#include <asm/byteorder.h> -#include <asm/unaligned.h> - -#include <net/irda/irda.h> -#include <net/irda/irttp.h> -#include <net/irda/irlmp.h> -#include <net/irda/irias_object.h> -#include <net/irda/iriap_event.h> -#include <net/irda/iriap.h> - -/* FIXME: This one should go in irlmp.c */ -static const char *const ias_charset_types[] __maybe_unused = { - "CS_ASCII", - "CS_ISO_8859_1", - "CS_ISO_8859_2", - "CS_ISO_8859_3", - "CS_ISO_8859_4", - "CS_ISO_8859_5", - "CS_ISO_8859_6", - "CS_ISO_8859_7", - "CS_ISO_8859_8", - "CS_ISO_8859_9", - "CS_UNICODE" -}; - -static hashbin_t *iriap = NULL; -static void *service_handle; - -static void __iriap_close(struct iriap_cb *self); -static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode); -static void iriap_disconnect_indication(void *instance, void *sap, - LM_REASON reason, struct sk_buff *skb); -static void iriap_connect_indication(void *instance, void *sap, - struct qos_info *qos, __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb); -static void iriap_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, __u8 max_header_size, - struct sk_buff *skb); -static int iriap_data_indication(void *instance, void *sap, - struct sk_buff *skb); - -static void iriap_watchdog_timer_expired(void *data); - -static inline void iriap_start_watchdog_timer(struct iriap_cb *self, - int timeout) -{ - irda_start_timer(&self->watchdog_timer, timeout, self, - iriap_watchdog_timer_expired); -} - -static struct lock_class_key irias_objects_key; - -/* - * Function iriap_init (void) - * - * Initializes the IrIAP layer, called by the module initialization code - * in irmod.c - */ -int __init iriap_init(void) -{ - struct ias_object *obj; - struct iriap_cb *server; - __u8 oct_seq[6]; - __u16 hints; - - /* Allocate master array */ - iriap = hashbin_new(HB_LOCK); - if (!iriap) - return -ENOMEM; - - /* Object repository - defined in irias_object.c */ - irias_objects = hashbin_new(HB_LOCK); - if (!irias_objects) { - net_warn_ratelimited("%s: Can't allocate irias_objects hashbin!\n", - __func__); - hashbin_delete(iriap, NULL); - return -ENOMEM; - } - - lockdep_set_class_and_name(&irias_objects->hb_spinlock, &irias_objects_key, - "irias_objects"); - - /* - * Register some default services for IrLMP - */ - hints = irlmp_service_to_hint(S_COMPUTER); - service_handle = irlmp_register_service(hints); - - /* Register the Device object with LM-IAS */ - obj = irias_new_object("Device", IAS_DEVICE_ID); - irias_add_string_attrib(obj, "DeviceName", "Linux", IAS_KERNEL_ATTR); - - oct_seq[0] = 0x01; /* Version 1 */ - oct_seq[1] = 0x00; /* IAS support bits */ - oct_seq[2] = 0x00; /* LM-MUX support bits */ -#ifdef CONFIG_IRDA_ULTRA - oct_seq[2] |= 0x04; /* Connectionless Data support */ -#endif - irias_add_octseq_attrib(obj, "IrLMPSupport", oct_seq, 3, - IAS_KERNEL_ATTR); - irias_insert_object(obj); - - /* - * Register server support with IrLMP so we can accept incoming - * connections - */ - server = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL); - if (!server) { - pr_debug("%s(), unable to open server\n", __func__); - return -1; - } - iriap_register_lsap(server, LSAP_IAS, IAS_SERVER); - - return 0; -} - -/* - * Function iriap_cleanup (void) - * - * Initializes the IrIAP layer, called by the module cleanup code in - * irmod.c - */ -void iriap_cleanup(void) -{ - irlmp_unregister_service(service_handle); - - hashbin_delete(iriap, (FREE_FUNC) __iriap_close); - hashbin_delete(irias_objects, (FREE_FUNC) __irias_delete_object); -} - -/* - * Function iriap_open (void) - * - * Opens an instance of the IrIAP layer, and registers with IrLMP - */ -struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv, - CONFIRM_CALLBACK callback) -{ - struct iriap_cb *self; - - self = kzalloc(sizeof(*self), GFP_ATOMIC); - if (!self) - return NULL; - - /* - * Initialize instance - */ - - self->magic = IAS_MAGIC; - self->mode = mode; - if (mode == IAS_CLIENT) { - if (iriap_register_lsap(self, slsap_sel, mode)) { - kfree(self); - return NULL; - } - } - - self->confirm = callback; - self->priv = priv; - - /* iriap_getvaluebyclass_request() will construct packets before - * we connect, so this must have a sane value... Jean II */ - self->max_header_size = LMP_MAX_HEADER; - - init_timer(&self->watchdog_timer); - - hashbin_insert(iriap, (irda_queue_t *) self, (long) self, NULL); - - /* Initialize state machines */ - iriap_next_client_state(self, S_DISCONNECT); - iriap_next_call_state(self, S_MAKE_CALL); - iriap_next_server_state(self, R_DISCONNECT); - iriap_next_r_connect_state(self, R_WAITING); - - return self; -} -EXPORT_SYMBOL(iriap_open); - -/* - * Function __iriap_close (self) - * - * Removes (deallocates) the IrIAP instance - * - */ -static void __iriap_close(struct iriap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - del_timer(&self->watchdog_timer); - - if (self->request_skb) - dev_kfree_skb(self->request_skb); - - self->magic = 0; - - kfree(self); -} - -/* - * Function iriap_close (void) - * - * Closes IrIAP and deregisters with IrLMP - */ -void iriap_close(struct iriap_cb *self) -{ - struct iriap_cb *entry; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - if (self->lsap) { - irlmp_close_lsap(self->lsap); - self->lsap = NULL; - } - - entry = (struct iriap_cb *) hashbin_remove(iriap, (long) self, NULL); - IRDA_ASSERT(entry == self, return;); - - __iriap_close(self); -} -EXPORT_SYMBOL(iriap_close); - -static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode) -{ - notify_t notify; - - irda_notify_init(¬ify); - notify.connect_confirm = iriap_connect_confirm; - notify.connect_indication = iriap_connect_indication; - notify.disconnect_indication = iriap_disconnect_indication; - notify.data_indication = iriap_data_indication; - notify.instance = self; - if (mode == IAS_CLIENT) - strcpy(notify.name, "IrIAS cli"); - else - strcpy(notify.name, "IrIAS srv"); - - self->lsap = irlmp_open_lsap(slsap_sel, ¬ify, 0); - if (self->lsap == NULL) { - net_err_ratelimited("%s: Unable to allocated LSAP!\n", - __func__); - return -1; - } - self->slsap_sel = self->lsap->slsap_sel; - - return 0; -} - -/* - * Function iriap_disconnect_indication (handle, reason) - * - * Got disconnect, so clean up everything associated with this connection - * - */ -static void iriap_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *skb) -{ - struct iriap_cb *self; - - pr_debug("%s(), reason=%s [%d]\n", __func__, - irlmp_reason_str(reason), reason); - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - IRDA_ASSERT(iriap != NULL, return;); - - del_timer(&self->watchdog_timer); - - /* Not needed */ - if (skb) - dev_kfree_skb(skb); - - if (self->mode == IAS_CLIENT) { - pr_debug("%s(), disconnect as client\n", __func__); - - - iriap_do_client_event(self, IAP_LM_DISCONNECT_INDICATION, - NULL); - /* - * Inform service user that the request failed by sending - * it a NULL value. Warning, the client might close us, so - * remember no to use self anymore after calling confirm - */ - if (self->confirm) - self->confirm(IAS_DISCONNECT, 0, NULL, self->priv); - } else { - pr_debug("%s(), disconnect as server\n", __func__); - iriap_do_server_event(self, IAP_LM_DISCONNECT_INDICATION, - NULL); - iriap_close(self); - } -} - -/* - * Function iriap_disconnect_request (handle) - */ -static void iriap_disconnect_request(struct iriap_cb *self) -{ - struct sk_buff *tx_skb; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); - if (tx_skb == NULL) { - pr_debug("%s(), Could not allocate an sk_buff of length %d\n", - __func__, LMP_MAX_HEADER); - return; - } - - /* - * Reserve space for MUX control and LAP header - */ - skb_reserve(tx_skb, LMP_MAX_HEADER); - - irlmp_disconnect_request(self->lsap, tx_skb); -} - -/* - * Function iriap_getvaluebyclass (addr, name, attr) - * - * Retrieve all values from attribute in all objects with given class - * name - */ -int iriap_getvaluebyclass_request(struct iriap_cb *self, - __u32 saddr, __u32 daddr, - char *name, char *attr) -{ - struct sk_buff *tx_skb; - int name_len, attr_len, skb_len; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return -1;); - - /* Client must supply the destination device address */ - if (!daddr) - return -1; - - self->daddr = daddr; - self->saddr = saddr; - - /* - * Save operation, so we know what the later indication is about - */ - self->operation = GET_VALUE_BY_CLASS; - - /* Give ourselves 10 secs to finish this operation */ - iriap_start_watchdog_timer(self, 10*HZ); - - name_len = strlen(name); /* Up to IAS_MAX_CLASSNAME = 60 */ - attr_len = strlen(attr); /* Up to IAS_MAX_ATTRIBNAME = 60 */ - - skb_len = self->max_header_size+2+name_len+1+attr_len+4; - tx_skb = alloc_skb(skb_len, GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - /* Reserve space for MUX and LAP header */ - skb_reserve(tx_skb, self->max_header_size); - skb_put(tx_skb, 3+name_len+attr_len); - frame = tx_skb->data; - - /* Build frame */ - frame[0] = IAP_LST | GET_VALUE_BY_CLASS; - frame[1] = name_len; /* Insert length of name */ - memcpy(frame+2, name, name_len); /* Insert name */ - frame[2+name_len] = attr_len; /* Insert length of attr */ - memcpy(frame+3+name_len, attr, attr_len); /* Insert attr */ - - iriap_do_client_event(self, IAP_CALL_REQUEST_GVBC, tx_skb); - - /* Drop reference count - see state_s_disconnect(). */ - dev_kfree_skb(tx_skb); - - return 0; -} -EXPORT_SYMBOL(iriap_getvaluebyclass_request); - -/* - * Function iriap_getvaluebyclass_confirm (self, skb) - * - * Got result from GetValueByClass command. Parse it and return result - * to service user. - * - */ -static void iriap_getvaluebyclass_confirm(struct iriap_cb *self, - struct sk_buff *skb) -{ - struct ias_value *value; - int charset; - __u32 value_len; - __u32 tmp_cpu32; - __u16 obj_id; - __u16 len; - __u8 type; - __u8 *fp; - int n; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* Initialize variables */ - fp = skb->data; - n = 2; - - /* Get length, MSB first */ - len = get_unaligned_be16(fp + n); - n += 2; - - pr_debug("%s(), len=%d\n", __func__, len); - - /* Get object ID, MSB first */ - obj_id = get_unaligned_be16(fp + n); - n += 2; - - type = fp[n++]; - pr_debug("%s(), Value type = %d\n", __func__, type); - - switch (type) { - case IAS_INTEGER: - memcpy(&tmp_cpu32, fp+n, 4); n += 4; - be32_to_cpus(&tmp_cpu32); - value = irias_new_integer_value(tmp_cpu32); - - /* Legal values restricted to 0x01-0x6f, page 15 irttp */ - pr_debug("%s(), lsap=%d\n", __func__, value->t.integer); - break; - case IAS_STRING: - charset = fp[n++]; - - switch (charset) { - case CS_ASCII: - break; -/* case CS_ISO_8859_1: */ -/* case CS_ISO_8859_2: */ -/* case CS_ISO_8859_3: */ -/* case CS_ISO_8859_4: */ -/* case CS_ISO_8859_5: */ -/* case CS_ISO_8859_6: */ -/* case CS_ISO_8859_7: */ -/* case CS_ISO_8859_8: */ -/* case CS_ISO_8859_9: */ -/* case CS_UNICODE: */ - default: - pr_debug("%s(), charset [%d] %s, not supported\n", - __func__, charset, - charset < ARRAY_SIZE(ias_charset_types) ? - ias_charset_types[charset] : - "(unknown)"); - - /* Aborting, close connection! */ - iriap_disconnect_request(self); - return; - /* break; */ - } - value_len = fp[n++]; - pr_debug("%s(), strlen=%d\n", __func__, value_len); - - /* Make sure the string is null-terminated */ - if (n + value_len < skb->len) - fp[n + value_len] = 0x00; - pr_debug("Got string %s\n", fp+n); - - /* Will truncate to IAS_MAX_STRING bytes */ - value = irias_new_string_value(fp+n); - break; - case IAS_OCT_SEQ: - value_len = get_unaligned_be16(fp + n); - n += 2; - - /* Will truncate to IAS_MAX_OCTET_STRING bytes */ - value = irias_new_octseq_value(fp+n, value_len); - break; - default: - value = irias_new_missing_value(); - break; - } - - /* Finished, close connection! */ - iriap_disconnect_request(self); - - /* Warning, the client might close us, so remember no to use self - * anymore after calling confirm - */ - if (self->confirm) - self->confirm(IAS_SUCCESS, obj_id, value, self->priv); - else { - pr_debug("%s(), missing handler!\n", __func__); - irias_delete_value(value); - } -} - -/* - * Function iriap_getvaluebyclass_response () - * - * Send answer back to remote LM-IAS - * - */ -static void iriap_getvaluebyclass_response(struct iriap_cb *self, - __u16 obj_id, - __u8 ret_code, - struct ias_value *value) -{ - struct sk_buff *tx_skb; - int n; - __be32 tmp_be32; - __be16 tmp_be16; - __u8 *fp; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - IRDA_ASSERT(value != NULL, return;); - IRDA_ASSERT(value->len <= 1024, return;); - - /* Initialize variables */ - n = 0; - - /* - * We must adjust the size of the response after the length of the - * value. We add 32 bytes because of the 6 bytes for the frame and - * max 5 bytes for the value coding. - */ - tx_skb = alloc_skb(value->len + self->max_header_size + 32, - GFP_ATOMIC); - if (!tx_skb) - return; - - /* Reserve space for MUX and LAP header */ - skb_reserve(tx_skb, self->max_header_size); - skb_put(tx_skb, 6); - - fp = tx_skb->data; - - /* Build frame */ - fp[n++] = GET_VALUE_BY_CLASS | IAP_LST; - fp[n++] = ret_code; - - /* Insert list length (MSB first) */ - tmp_be16 = htons(0x0001); - memcpy(fp+n, &tmp_be16, 2); n += 2; - - /* Insert object identifier ( MSB first) */ - tmp_be16 = cpu_to_be16(obj_id); - memcpy(fp+n, &tmp_be16, 2); n += 2; - - switch (value->type) { - case IAS_STRING: - skb_put(tx_skb, 3 + value->len); - fp[n++] = value->type; - fp[n++] = 0; /* ASCII */ - fp[n++] = (__u8) value->len; - memcpy(fp+n, value->t.string, value->len); n+=value->len; - break; - case IAS_INTEGER: - skb_put(tx_skb, 5); - fp[n++] = value->type; - - tmp_be32 = cpu_to_be32(value->t.integer); - memcpy(fp+n, &tmp_be32, 4); n += 4; - break; - case IAS_OCT_SEQ: - skb_put(tx_skb, 3 + value->len); - fp[n++] = value->type; - - tmp_be16 = cpu_to_be16(value->len); - memcpy(fp+n, &tmp_be16, 2); n += 2; - memcpy(fp+n, value->t.oct_seq, value->len); n+=value->len; - break; - case IAS_MISSING: - pr_debug("%s: sending IAS_MISSING\n", __func__); - skb_put(tx_skb, 1); - fp[n++] = value->type; - break; - default: - pr_debug("%s(), type not implemented!\n", __func__); - break; - } - iriap_do_r_connect_event(self, IAP_CALL_RESPONSE, tx_skb); - - /* Drop reference count - see state_r_execute(). */ - dev_kfree_skb(tx_skb); -} - -/* - * Function iriap_getvaluebyclass_indication (self, skb) - * - * getvaluebyclass is requested from peer LM-IAS - * - */ -static void iriap_getvaluebyclass_indication(struct iriap_cb *self, - struct sk_buff *skb) -{ - struct ias_object *obj; - struct ias_attrib *attrib; - int name_len; - int attr_len; - char name[IAS_MAX_CLASSNAME + 1]; /* 60 bytes */ - char attr[IAS_MAX_ATTRIBNAME + 1]; /* 60 bytes */ - __u8 *fp; - int n; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - fp = skb->data; - n = 1; - - name_len = fp[n++]; - - IRDA_ASSERT(name_len < IAS_MAX_CLASSNAME + 1, return;); - - memcpy(name, fp+n, name_len); n+=name_len; - name[name_len] = '\0'; - - attr_len = fp[n++]; - - IRDA_ASSERT(attr_len < IAS_MAX_ATTRIBNAME + 1, return;); - - memcpy(attr, fp+n, attr_len); n+=attr_len; - attr[attr_len] = '\0'; - - pr_debug("LM-IAS: Looking up %s: %s\n", name, attr); - obj = irias_find_object(name); - - if (obj == NULL) { - pr_debug("LM-IAS: Object %s not found\n", name); - iriap_getvaluebyclass_response(self, 0x1235, IAS_CLASS_UNKNOWN, - &irias_missing); - return; - } - pr_debug("LM-IAS: found %s, id=%d\n", obj->name, obj->id); - - attrib = irias_find_attrib(obj, attr); - if (attrib == NULL) { - pr_debug("LM-IAS: Attribute %s not found\n", attr); - iriap_getvaluebyclass_response(self, obj->id, - IAS_ATTRIB_UNKNOWN, - &irias_missing); - return; - } - - /* We have a match; send the value. */ - iriap_getvaluebyclass_response(self, obj->id, IAS_SUCCESS, - attrib->value); -} - -/* - * Function iriap_send_ack (void) - * - * Currently not used - * - */ -void iriap_send_ack(struct iriap_cb *self) -{ - struct sk_buff *tx_skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - tx_skb = alloc_skb(LMP_MAX_HEADER + 1, GFP_ATOMIC); - if (!tx_skb) - return; - - /* Reserve space for MUX and LAP header */ - skb_reserve(tx_skb, self->max_header_size); - skb_put(tx_skb, 1); - frame = tx_skb->data; - - /* Build frame */ - frame[0] = IAP_LST | IAP_ACK | self->operation; - - irlmp_data_request(self->lsap, tx_skb); -} - -void iriap_connect_request(struct iriap_cb *self) -{ - int ret; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - ret = irlmp_connect_request(self->lsap, LSAP_IAS, - self->saddr, self->daddr, - NULL, NULL); - if (ret < 0) { - pr_debug("%s(), connect failed!\n", __func__); - self->confirm(IAS_DISCONNECT, 0, NULL, self->priv); - } -} - -/* - * Function iriap_connect_confirm (handle, skb) - * - * LSAP connection confirmed! - * - */ -static void iriap_connect_confirm(void *instance, void *sap, - struct qos_info *qos, __u32 max_seg_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct iriap_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - self->max_data_size = max_seg_size; - self->max_header_size = max_header_size; - - del_timer(&self->watchdog_timer); - - iriap_do_client_event(self, IAP_LM_CONNECT_CONFIRM, skb); - - /* Drop reference count - see state_s_make_call(). */ - dev_kfree_skb(skb); -} - -/* - * Function iriap_connect_indication ( handle, skb) - * - * Remote LM-IAS is requesting connection - * - */ -static void iriap_connect_indication(void *instance, void *sap, - struct qos_info *qos, __u32 max_seg_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct iriap_cb *self, *new; - - self = instance; - - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(self != NULL, goto out;); - IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;); - - /* Start new server */ - new = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL); - if (!new) { - pr_debug("%s(), open failed\n", __func__); - goto out; - } - - /* Now attach up the new "socket" */ - new->lsap = irlmp_dup(self->lsap, new); - if (!new->lsap) { - pr_debug("%s(), dup failed!\n", __func__); - goto out; - } - - new->max_data_size = max_seg_size; - new->max_header_size = max_header_size; - - /* Clean up the original one to keep it in listen state */ - irlmp_listen(self->lsap); - - iriap_do_server_event(new, IAP_LM_CONNECT_INDICATION, skb); - -out: - /* Drop reference count - see state_r_disconnect(). */ - dev_kfree_skb(skb); -} - -/* - * Function iriap_data_indication (handle, skb) - * - * Receives data from connection identified by handle from IrLMP - * - */ -static int iriap_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct iriap_cb *self; - __u8 *frame; - __u8 opcode; - - self = instance; - - IRDA_ASSERT(skb != NULL, return 0;); - IRDA_ASSERT(self != NULL, goto out;); - IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;); - - frame = skb->data; - - if (self->mode == IAS_SERVER) { - /* Call server */ - pr_debug("%s(), Calling server!\n", __func__); - iriap_do_r_connect_event(self, IAP_RECV_F_LST, skb); - goto out; - } - opcode = frame[0]; - if (~opcode & IAP_LST) { - net_warn_ratelimited("%s:, IrIAS multiframe commands or results is not implemented yet!\n", - __func__); - goto out; - } - - /* Check for ack frames since they don't contain any data */ - if (opcode & IAP_ACK) { - pr_debug("%s() Got ack frame!\n", __func__); - goto out; - } - - opcode &= ~IAP_LST; /* Mask away LST bit */ - - switch (opcode) { - case GET_INFO_BASE: - pr_debug("IrLMP GetInfoBaseDetails not implemented!\n"); - break; - case GET_VALUE_BY_CLASS: - iriap_do_call_event(self, IAP_RECV_F_LST, NULL); - - switch (frame[1]) { - case IAS_SUCCESS: - iriap_getvaluebyclass_confirm(self, skb); - break; - case IAS_CLASS_UNKNOWN: - pr_debug("%s(), No such class!\n", __func__); - /* Finished, close connection! */ - iriap_disconnect_request(self); - - /* - * Warning, the client might close us, so remember - * no to use self anymore after calling confirm - */ - if (self->confirm) - self->confirm(IAS_CLASS_UNKNOWN, 0, NULL, - self->priv); - break; - case IAS_ATTRIB_UNKNOWN: - pr_debug("%s(), No such attribute!\n", __func__); - /* Finished, close connection! */ - iriap_disconnect_request(self); - - /* - * Warning, the client might close us, so remember - * no to use self anymore after calling confirm - */ - if (self->confirm) - self->confirm(IAS_ATTRIB_UNKNOWN, 0, NULL, - self->priv); - break; - } - break; - default: - pr_debug("%s(), Unknown op-code: %02x\n", __func__, - opcode); - break; - } - -out: - /* Cleanup - sub-calls will have done skb_get() as needed. */ - dev_kfree_skb(skb); - return 0; -} - -/* - * Function iriap_call_indication (self, skb) - * - * Received call to server from peer LM-IAS - * - */ -void iriap_call_indication(struct iriap_cb *self, struct sk_buff *skb) -{ - __u8 *fp; - __u8 opcode; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - fp = skb->data; - - opcode = fp[0]; - if (~opcode & 0x80) { - net_warn_ratelimited("%s: IrIAS multiframe commands or results is not implemented yet!\n", - __func__); - return; - } - opcode &= 0x7f; /* Mask away LST bit */ - - switch (opcode) { - case GET_INFO_BASE: - net_warn_ratelimited("%s: GetInfoBaseDetails not implemented yet!\n", - __func__); - break; - case GET_VALUE_BY_CLASS: - iriap_getvaluebyclass_indication(self, skb); - break; - } - /* skb will be cleaned up in iriap_data_indication */ -} - -/* - * Function iriap_watchdog_timer_expired (data) - * - * Query has taken too long time, so abort - * - */ -static void iriap_watchdog_timer_expired(void *data) -{ - struct iriap_cb *self = (struct iriap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - /* iriap_close(self); */ -} - -#ifdef CONFIG_PROC_FS - -static const char *const ias_value_types[] = { - "IAS_MISSING", - "IAS_INTEGER", - "IAS_OCT_SEQ", - "IAS_STRING" -}; - -static inline struct ias_object *irias_seq_idx(loff_t pos) -{ - struct ias_object *obj; - - for (obj = (struct ias_object *) hashbin_get_first(irias_objects); - obj; obj = (struct ias_object *) hashbin_get_next(irias_objects)) { - if (pos-- == 0) - break; - } - - return obj; -} - -static void *irias_seq_start(struct seq_file *seq, loff_t *pos) -{ - spin_lock_irq(&irias_objects->hb_spinlock); - - return *pos ? irias_seq_idx(*pos - 1) : SEQ_START_TOKEN; -} - -static void *irias_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - ++*pos; - - return (v == SEQ_START_TOKEN) - ? (void *) hashbin_get_first(irias_objects) - : (void *) hashbin_get_next(irias_objects); -} - -static void irias_seq_stop(struct seq_file *seq, void *v) -{ - spin_unlock_irq(&irias_objects->hb_spinlock); -} - -static int irias_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) - seq_puts(seq, "LM-IAS Objects:\n"); - else { - struct ias_object *obj = v; - struct ias_attrib *attrib; - - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -EINVAL;); - - seq_printf(seq, "name: %s, id=%d\n", - obj->name, obj->id); - - /* Careful for priority inversions here ! - * All other uses of attrib spinlock are independent of - * the object spinlock, so we are safe. Jean II */ - spin_lock(&obj->attribs->hb_spinlock); - - /* List all attributes for this object */ - for (attrib = (struct ias_attrib *) hashbin_get_first(obj->attribs); - attrib != NULL; - attrib = (struct ias_attrib *) hashbin_get_next(obj->attribs)) { - - IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, - goto outloop; ); - - seq_printf(seq, " - Attribute name: \"%s\", ", - attrib->name); - seq_printf(seq, "value[%s]: ", - ias_value_types[attrib->value->type]); - - switch (attrib->value->type) { - case IAS_INTEGER: - seq_printf(seq, "%d\n", - attrib->value->t.integer); - break; - case IAS_STRING: - seq_printf(seq, "\"%s\"\n", - attrib->value->t.string); - break; - case IAS_OCT_SEQ: - seq_printf(seq, "octet sequence (%d bytes)\n", - attrib->value->len); - break; - case IAS_MISSING: - seq_puts(seq, "missing\n"); - break; - default: - seq_printf(seq, "type %d?\n", - attrib->value->type); - } - seq_putc(seq, '\n'); - - } - IRDA_ASSERT_LABEL(outloop:) - spin_unlock(&obj->attribs->hb_spinlock); - } - - return 0; -} - -static const struct seq_operations irias_seq_ops = { - .start = irias_seq_start, - .next = irias_seq_next, - .stop = irias_seq_stop, - .show = irias_seq_show, -}; - -static int irias_seq_open(struct inode *inode, struct file *file) -{ - IRDA_ASSERT( irias_objects != NULL, return -EINVAL;); - - return seq_open(file, &irias_seq_ops); -} - -const struct file_operations irias_seq_fops = { - .owner = THIS_MODULE, - .open = irias_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -#endif /* PROC_FS */ diff --git a/net/irda/iriap_event.c b/net/irda/iriap_event.c deleted file mode 100644 index e6098b2e048a..000000000000 --- a/net/irda/iriap_event.c +++ /dev/null @@ -1,496 +0,0 @@ -/********************************************************************* - * - * Filename: iriap_event.c - * Version: 0.1 - * Description: IAP Finite State Machine - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Thu Aug 21 00:02:07 1997 - * Modified at: Wed Mar 1 11:28:34 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1997, 1999-2000 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/slab.h> - -#include <net/irda/irda.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/iriap_event.h> - -static void state_s_disconnect (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_connecting (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_call (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); - -static void state_s_make_call (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_calling (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_outstanding (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_replying (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_s_wait_active (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); - -static void state_r_disconnect (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_r_call (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_r_waiting (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_r_wait_active (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_r_receiving (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_r_execute (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); -static void state_r_returning (struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb); - -static void (*iriap_state[])(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) = { - /* Client FSM */ - state_s_disconnect, - state_s_connecting, - state_s_call, - - /* S-Call FSM */ - state_s_make_call, - state_s_calling, - state_s_outstanding, - state_s_replying, - state_s_wait_for_call, - state_s_wait_active, - - /* Server FSM */ - state_r_disconnect, - state_r_call, - - /* R-Connect FSM */ - state_r_waiting, - state_r_wait_active, - state_r_receiving, - state_r_execute, - state_r_returning, -}; - -void iriap_next_client_state(struct iriap_cb *self, IRIAP_STATE state) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - self->client_state = state; -} - -void iriap_next_call_state(struct iriap_cb *self, IRIAP_STATE state) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - self->call_state = state; -} - -void iriap_next_server_state(struct iriap_cb *self, IRIAP_STATE state) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - self->server_state = state; -} - -void iriap_next_r_connect_state(struct iriap_cb *self, IRIAP_STATE state) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - self->r_connect_state = state; -} - -void iriap_do_client_event(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - (*iriap_state[ self->client_state]) (self, event, skb); -} - -void iriap_do_call_event(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - (*iriap_state[ self->call_state]) (self, event, skb); -} - -void iriap_do_server_event(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - (*iriap_state[ self->server_state]) (self, event, skb); -} - -void iriap_do_r_connect_event(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - (*iriap_state[ self->r_connect_state]) (self, event, skb); -} - - -/* - * Function state_s_disconnect (event, skb) - * - * S-Disconnect, The device has no LSAP connection to a particular - * remote device. - */ -static void state_s_disconnect(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - switch (event) { - case IAP_CALL_REQUEST_GVBC: - iriap_next_client_state(self, S_CONNECTING); - IRDA_ASSERT(self->request_skb == NULL, return;); - /* Don't forget to refcount it - - * see iriap_getvaluebyclass_request(). */ - skb_get(skb); - self->request_skb = skb; - iriap_connect_request(self); - break; - case IAP_LM_DISCONNECT_INDICATION: - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__, event); - break; - } -} - -/* - * Function state_s_connecting (self, event, skb) - * - * S-Connecting - * - */ -static void state_s_connecting(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - switch (event) { - case IAP_LM_CONNECT_CONFIRM: - /* - * Jump to S-Call FSM - */ - iriap_do_call_event(self, IAP_CALL_REQUEST, skb); - /* iriap_call_request(self, 0,0,0); */ - iriap_next_client_state(self, S_CALL); - break; - case IAP_LM_DISCONNECT_INDICATION: - /* Abort calls */ - iriap_next_call_state(self, S_MAKE_CALL); - iriap_next_client_state(self, S_DISCONNECT); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__, event); - break; - } -} - -/* - * Function state_s_call (self, event, skb) - * - * S-Call, The device can process calls to a specific remote - * device. Whenever the LSAP connection is disconnected, this state - * catches that event and clears up - */ -static void state_s_call(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - - switch (event) { - case IAP_LM_DISCONNECT_INDICATION: - /* Abort calls */ - iriap_next_call_state(self, S_MAKE_CALL); - iriap_next_client_state(self, S_DISCONNECT); - break; - default: - pr_debug("state_s_call: Unknown event %d\n", event); - break; - } -} - -/* - * Function state_s_make_call (event, skb) - * - * S-Make-Call - * - */ -static void state_s_make_call(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - struct sk_buff *tx_skb; - - IRDA_ASSERT(self != NULL, return;); - - switch (event) { - case IAP_CALL_REQUEST: - /* Already refcounted - see state_s_disconnect() */ - tx_skb = self->request_skb; - self->request_skb = NULL; - - irlmp_data_request(self->lsap, tx_skb); - iriap_next_call_state(self, S_OUTSTANDING); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__, event); - break; - } -} - -/* - * Function state_s_calling (event, skb) - * - * S-Calling - * - */ -static void state_s_calling(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), Not implemented\n", __func__); -} - -/* - * Function state_s_outstanding (event, skb) - * - * S-Outstanding, The device is waiting for a response to a command - * - */ -static void state_s_outstanding(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - - switch (event) { - case IAP_RECV_F_LST: - /*iriap_send_ack(self);*/ - /*LM_Idle_request(idle); */ - - iriap_next_call_state(self, S_WAIT_FOR_CALL); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__, event); - break; - } -} - -/* - * Function state_s_replying (event, skb) - * - * S-Replying, The device is collecting a multiple part response - */ -static void state_s_replying(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), Not implemented\n", __func__); -} - -/* - * Function state_s_wait_for_call (event, skb) - * - * S-Wait-for-Call - * - */ -static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), Not implemented\n", __func__); -} - - -/* - * Function state_s_wait_active (event, skb) - * - * S-Wait-Active - * - */ -static void state_s_wait_active(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), Not implemented\n", __func__); -} - -/************************************************************************** - * - * Server FSM - * - **************************************************************************/ - -/* - * Function state_r_disconnect (self, event, skb) - * - * LM-IAS server is disconnected (not processing any requests!) - * - */ -static void state_r_disconnect(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - struct sk_buff *tx_skb; - - switch (event) { - case IAP_LM_CONNECT_INDICATION: - tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); - if (tx_skb == NULL) - return; - - /* Reserve space for MUX_CONTROL and LAP header */ - skb_reserve(tx_skb, LMP_MAX_HEADER); - - irlmp_connect_response(self->lsap, tx_skb); - /*LM_Idle_request(idle); */ - - iriap_next_server_state(self, R_CALL); - - /* - * Jump to R-Connect FSM, we skip R-Waiting since we do not - * care about LM_Idle_request()! - */ - iriap_next_r_connect_state(self, R_RECEIVING); - break; - default: - pr_debug("%s(), unknown event %d\n", __func__, event); - break; - } -} - -/* - * Function state_r_call (self, event, skb) - */ -static void state_r_call(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - switch (event) { - case IAP_LM_DISCONNECT_INDICATION: - /* Abort call */ - iriap_next_server_state(self, R_DISCONNECT); - iriap_next_r_connect_state(self, R_WAITING); - break; - default: - pr_debug("%s(), unknown event!\n", __func__); - break; - } -} - -/* - * R-Connect FSM - */ - -/* - * Function state_r_waiting (self, event, skb) - */ -static void state_r_waiting(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), Not implemented\n", __func__); -} - -static void state_r_wait_active(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), Not implemented\n", __func__); -} - -/* - * Function state_r_receiving (self, event, skb) - * - * We are receiving a command - * - */ -static void state_r_receiving(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - switch (event) { - case IAP_RECV_F_LST: - iriap_next_r_connect_state(self, R_EXECUTE); - - iriap_call_indication(self, skb); - break; - default: - pr_debug("%s(), unknown event!\n", __func__); - break; - } -} - -/* - * Function state_r_execute (self, event, skb) - * - * The server is processing the request - * - */ -static void state_r_execute(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IAS_MAGIC, return;); - - switch (event) { - case IAP_CALL_RESPONSE: - /* - * Since we don't implement the Waiting state, we return - * to state Receiving instead, DB. - */ - iriap_next_r_connect_state(self, R_RECEIVING); - - /* Don't forget to refcount it - see - * iriap_getvaluebyclass_response(). */ - skb_get(skb); - - irlmp_data_request(self->lsap, skb); - break; - default: - pr_debug("%s(), unknown event!\n", __func__); - break; - } -} - -static void state_r_returning(struct iriap_cb *self, IRIAP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), event=%d\n", __func__, event); - - switch (event) { - case IAP_RECV_F_LST: - break; - default: - break; - } -} diff --git a/net/irda/irias_object.c b/net/irda/irias_object.c deleted file mode 100644 index 53b86d0e1630..000000000000 --- a/net/irda/irias_object.c +++ /dev/null @@ -1,555 +0,0 @@ -/********************************************************************* - * - * Filename: irias_object.c - * Version: 0.3 - * Description: IAS object database and functions - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Thu Oct 1 22:50:04 1998 - * Modified at: Wed Dec 15 11:23:16 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/socket.h> -#include <linux/module.h> - -#include <net/irda/irda.h> -#include <net/irda/irias_object.h> - -hashbin_t *irias_objects; - -/* - * Used when a missing value needs to be returned - */ -struct ias_value irias_missing = { IAS_MISSING, 0, 0, 0, {0}}; - - -/* - * Function ias_new_object (name, id) - * - * Create a new IAS object - * - */ -struct ias_object *irias_new_object( char *name, int id) -{ - struct ias_object *obj; - - obj = kzalloc(sizeof(struct ias_object), GFP_ATOMIC); - if (obj == NULL) { - net_warn_ratelimited("%s(), Unable to allocate object!\n", - __func__); - return NULL; - } - - obj->magic = IAS_OBJECT_MAGIC; - obj->name = kstrndup(name, IAS_MAX_CLASSNAME, GFP_ATOMIC); - if (!obj->name) { - net_warn_ratelimited("%s(), Unable to allocate name!\n", - __func__); - kfree(obj); - return NULL; - } - obj->id = id; - - /* Locking notes : the attrib spinlock has lower precendence - * than the objects spinlock. Never grap the objects spinlock - * while holding any attrib spinlock (risk of deadlock). Jean II */ - obj->attribs = hashbin_new(HB_LOCK); - - if (obj->attribs == NULL) { - net_warn_ratelimited("%s(), Unable to allocate attribs!\n", - __func__); - kfree(obj->name); - kfree(obj); - return NULL; - } - - return obj; -} -EXPORT_SYMBOL(irias_new_object); - -/* - * Function irias_delete_attrib (attrib) - * - * Delete given attribute and deallocate all its memory - * - */ -static void __irias_delete_attrib(struct ias_attrib *attrib) -{ - IRDA_ASSERT(attrib != NULL, return;); - IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;); - - kfree(attrib->name); - - irias_delete_value(attrib->value); - attrib->magic = ~IAS_ATTRIB_MAGIC; - - kfree(attrib); -} - -void __irias_delete_object(struct ias_object *obj) -{ - IRDA_ASSERT(obj != NULL, return;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); - - kfree(obj->name); - - hashbin_delete(obj->attribs, (FREE_FUNC) __irias_delete_attrib); - - obj->magic = ~IAS_OBJECT_MAGIC; - - kfree(obj); -} - -/* - * Function irias_delete_object (obj) - * - * Remove object from hashbin and deallocate all attributes associated with - * with this object and the object itself - * - */ -int irias_delete_object(struct ias_object *obj) -{ - struct ias_object *node; - - IRDA_ASSERT(obj != NULL, return -1;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;); - - /* Remove from list */ - node = hashbin_remove_this(irias_objects, (irda_queue_t *) obj); - if (!node) - pr_debug("%s(), object already removed!\n", - __func__); - - /* Destroy */ - __irias_delete_object(obj); - - return 0; -} -EXPORT_SYMBOL(irias_delete_object); - -/* - * Function irias_delete_attrib (obj) - * - * Remove attribute from hashbin and, if it was the last attribute of - * the object, remove the object as well. - * - */ -int irias_delete_attrib(struct ias_object *obj, struct ias_attrib *attrib, - int cleanobject) -{ - struct ias_attrib *node; - - IRDA_ASSERT(obj != NULL, return -1;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;); - IRDA_ASSERT(attrib != NULL, return -1;); - - /* Remove attribute from object */ - node = hashbin_remove_this(obj->attribs, (irda_queue_t *) attrib); - if (!node) - return 0; /* Already removed or non-existent */ - - /* Deallocate attribute */ - __irias_delete_attrib(node); - - /* Check if object has still some attributes, destroy it if none. - * At first glance, this look dangerous, as the kernel reference - * various IAS objects. However, we only use this function on - * user attributes, not kernel attributes, so there is no risk - * of deleting a kernel object this way. Jean II */ - node = (struct ias_attrib *) hashbin_get_first(obj->attribs); - if (cleanobject && !node) - irias_delete_object(obj); - - return 0; -} - -/* - * Function irias_insert_object (obj) - * - * Insert an object into the LM-IAS database - * - */ -void irias_insert_object(struct ias_object *obj) -{ - IRDA_ASSERT(obj != NULL, return;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); - - hashbin_insert(irias_objects, (irda_queue_t *) obj, 0, obj->name); -} -EXPORT_SYMBOL(irias_insert_object); - -/* - * Function irias_find_object (name) - * - * Find object with given name - * - */ -struct ias_object *irias_find_object(char *name) -{ - IRDA_ASSERT(name != NULL, return NULL;); - - /* Unsafe (locking), object might change */ - return hashbin_lock_find(irias_objects, 0, name); -} -EXPORT_SYMBOL(irias_find_object); - -/* - * Function irias_find_attrib (obj, name) - * - * Find named attribute in object - * - */ -struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name) -{ - struct ias_attrib *attrib; - - IRDA_ASSERT(obj != NULL, return NULL;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return NULL;); - IRDA_ASSERT(name != NULL, return NULL;); - - attrib = hashbin_lock_find(obj->attribs, 0, name); - if (attrib == NULL) - return NULL; - - /* Unsafe (locking), attrib might change */ - return attrib; -} - -/* - * Function irias_add_attribute (obj, attrib) - * - * Add attribute to object - * - */ -static void irias_add_attrib(struct ias_object *obj, struct ias_attrib *attrib, - int owner) -{ - IRDA_ASSERT(obj != NULL, return;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); - - IRDA_ASSERT(attrib != NULL, return;); - IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;); - - /* Set if attrib is owned by kernel or user space */ - attrib->value->owner = owner; - - hashbin_insert(obj->attribs, (irda_queue_t *) attrib, 0, attrib->name); -} - -/* - * Function irias_object_change_attribute (obj_name, attrib_name, new_value) - * - * Change the value of an objects attribute. - * - */ -int irias_object_change_attribute(char *obj_name, char *attrib_name, - struct ias_value *new_value) -{ - struct ias_object *obj; - struct ias_attrib *attrib; - unsigned long flags; - - /* Find object */ - obj = hashbin_lock_find(irias_objects, 0, obj_name); - if (obj == NULL) { - net_warn_ratelimited("%s: Unable to find object: %s\n", - __func__, obj_name); - return -1; - } - - /* Slightly unsafe (obj might get removed under us) */ - spin_lock_irqsave(&obj->attribs->hb_spinlock, flags); - - /* Find attribute */ - attrib = hashbin_find(obj->attribs, 0, attrib_name); - if (attrib == NULL) { - net_warn_ratelimited("%s: Unable to find attribute: %s\n", - __func__, attrib_name); - spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags); - return -1; - } - - if ( attrib->value->type != new_value->type) { - pr_debug("%s(), changing value type not allowed!\n", - __func__); - spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags); - return -1; - } - - /* Delete old value */ - irias_delete_value(attrib->value); - - /* Insert new value */ - attrib->value = new_value; - - /* Success */ - spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags); - return 0; -} -EXPORT_SYMBOL(irias_object_change_attribute); - -/* - * Function irias_object_add_integer_attrib (obj, name, value) - * - * Add an integer attribute to an LM-IAS object - * - */ -void irias_add_integer_attrib(struct ias_object *obj, char *name, int value, - int owner) -{ - struct ias_attrib *attrib; - - IRDA_ASSERT(obj != NULL, return;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); - IRDA_ASSERT(name != NULL, return;); - - attrib = kzalloc(sizeof(struct ias_attrib), GFP_ATOMIC); - if (attrib == NULL) { - net_warn_ratelimited("%s: Unable to allocate attribute!\n", - __func__); - return; - } - - attrib->magic = IAS_ATTRIB_MAGIC; - attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC); - - /* Insert value */ - attrib->value = irias_new_integer_value(value); - if (!attrib->name || !attrib->value) { - net_warn_ratelimited("%s: Unable to allocate attribute!\n", - __func__); - if (attrib->value) - irias_delete_value(attrib->value); - kfree(attrib->name); - kfree(attrib); - return; - } - - irias_add_attrib(obj, attrib, owner); -} -EXPORT_SYMBOL(irias_add_integer_attrib); - - /* - * Function irias_add_octseq_attrib (obj, name, octet_seq, len) - * - * Add a octet sequence attribute to an LM-IAS object - * - */ - -void irias_add_octseq_attrib(struct ias_object *obj, char *name, __u8 *octets, - int len, int owner) -{ - struct ias_attrib *attrib; - - IRDA_ASSERT(obj != NULL, return;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); - - IRDA_ASSERT(name != NULL, return;); - IRDA_ASSERT(octets != NULL, return;); - - attrib = kzalloc(sizeof(struct ias_attrib), GFP_ATOMIC); - if (attrib == NULL) { - net_warn_ratelimited("%s: Unable to allocate attribute!\n", - __func__); - return; - } - - attrib->magic = IAS_ATTRIB_MAGIC; - attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC); - - attrib->value = irias_new_octseq_value( octets, len); - if (!attrib->name || !attrib->value) { - net_warn_ratelimited("%s: Unable to allocate attribute!\n", - __func__); - if (attrib->value) - irias_delete_value(attrib->value); - kfree(attrib->name); - kfree(attrib); - return; - } - - irias_add_attrib(obj, attrib, owner); -} -EXPORT_SYMBOL(irias_add_octseq_attrib); - -/* - * Function irias_object_add_string_attrib (obj, string) - * - * Add a string attribute to an LM-IAS object - * - */ -void irias_add_string_attrib(struct ias_object *obj, char *name, char *value, - int owner) -{ - struct ias_attrib *attrib; - - IRDA_ASSERT(obj != NULL, return;); - IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); - - IRDA_ASSERT(name != NULL, return;); - IRDA_ASSERT(value != NULL, return;); - - attrib = kzalloc(sizeof( struct ias_attrib), GFP_ATOMIC); - if (attrib == NULL) { - net_warn_ratelimited("%s: Unable to allocate attribute!\n", - __func__); - return; - } - - attrib->magic = IAS_ATTRIB_MAGIC; - attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC); - - attrib->value = irias_new_string_value(value); - if (!attrib->name || !attrib->value) { - net_warn_ratelimited("%s: Unable to allocate attribute!\n", - __func__); - if (attrib->value) - irias_delete_value(attrib->value); - kfree(attrib->name); - kfree(attrib); - return; - } - - irias_add_attrib(obj, attrib, owner); -} -EXPORT_SYMBOL(irias_add_string_attrib); - -/* - * Function irias_new_integer_value (integer) - * - * Create new IAS integer value - * - */ -struct ias_value *irias_new_integer_value(int integer) -{ - struct ias_value *value; - - value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); - if (value == NULL) - return NULL; - - value->type = IAS_INTEGER; - value->len = 4; - value->t.integer = integer; - - return value; -} -EXPORT_SYMBOL(irias_new_integer_value); - -/* - * Function irias_new_string_value (string) - * - * Create new IAS string value - * - * Per IrLMP 1.1, 4.3.3.2, strings are up to 256 chars - Jean II - */ -struct ias_value *irias_new_string_value(char *string) -{ - struct ias_value *value; - - value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); - if (value == NULL) - return NULL; - - value->type = IAS_STRING; - value->charset = CS_ASCII; - value->t.string = kstrndup(string, IAS_MAX_STRING, GFP_ATOMIC); - if (!value->t.string) { - net_warn_ratelimited("%s: Unable to kmalloc!\n", __func__); - kfree(value); - return NULL; - } - - value->len = strlen(value->t.string); - - return value; -} - -/* - * Function irias_new_octseq_value (octets, len) - * - * Create new IAS octet-sequence value - * - * Per IrLMP 1.1, 4.3.3.2, octet-sequence are up to 1024 bytes - Jean II - */ -struct ias_value *irias_new_octseq_value(__u8 *octseq , int len) -{ - struct ias_value *value; - - value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); - if (value == NULL) - return NULL; - - value->type = IAS_OCT_SEQ; - /* Check length */ - if(len > IAS_MAX_OCTET_STRING) - len = IAS_MAX_OCTET_STRING; - value->len = len; - - value->t.oct_seq = kmemdup(octseq, len, GFP_ATOMIC); - if (value->t.oct_seq == NULL){ - net_warn_ratelimited("%s: Unable to kmalloc!\n", __func__); - kfree(value); - return NULL; - } - return value; -} - -struct ias_value *irias_new_missing_value(void) -{ - struct ias_value *value; - - value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); - if (value == NULL) - return NULL; - - value->type = IAS_MISSING; - - return value; -} - -/* - * Function irias_delete_value (value) - * - * Delete IAS value - * - */ -void irias_delete_value(struct ias_value *value) -{ - IRDA_ASSERT(value != NULL, return;); - - switch (value->type) { - case IAS_INTEGER: /* Fallthrough */ - case IAS_MISSING: - /* No need to deallocate */ - break; - case IAS_STRING: - /* Deallocate string */ - kfree(value->t.string); - break; - case IAS_OCT_SEQ: - /* Deallocate byte stream */ - kfree(value->t.oct_seq); - break; - default: - pr_debug("%s(), Unknown value type!\n", __func__); - break; - } - kfree(value); -} -EXPORT_SYMBOL(irias_delete_value); diff --git a/net/irda/irlan/Kconfig b/net/irda/irlan/Kconfig deleted file mode 100644 index 951abc2e3a7f..000000000000 --- a/net/irda/irlan/Kconfig +++ /dev/null @@ -1,14 +0,0 @@ -config IRLAN - tristate "IrLAN protocol" - depends on IRDA - help - Say Y here if you want to build support for the IrLAN protocol. - To compile it as a module, choose M here: the module will be called - irlan. IrLAN emulates an Ethernet and makes it possible to put up - a wireless LAN using infrared beams. - - The IrLAN protocol can be used to talk with infrared access points - like the HP NetbeamIR, or the ESI JetEye NET. You can also connect - to another Linux machine running the IrLAN protocol for ad-hoc - networking! - diff --git a/net/irda/irlan/Makefile b/net/irda/irlan/Makefile deleted file mode 100644 index 94eefbc8e6b9..000000000000 --- a/net/irda/irlan/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the Linux IrDA IrLAN protocol layer. -# - -obj-$(CONFIG_IRLAN) += irlan.o - -irlan-y := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o diff --git a/net/irda/irlan/irlan_client.c b/net/irda/irlan/irlan_client.c deleted file mode 100644 index c5837a40c78e..000000000000 --- a/net/irda/irlan/irlan_client.c +++ /dev/null @@ -1,559 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_client.c - * Version: 0.9 - * Description: IrDA LAN Access Protocol (IrLAN) Client - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 31 20:14:37 1997 - * Modified at: Tue Dec 14 15:47:02 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov> - * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk> - * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> -#include <linux/bitops.h> -#include <net/arp.h> - -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/irttp.h> -#include <net/irda/irlmp.h> -#include <net/irda/irias_object.h> -#include <net/irda/iriap.h> -#include <net/irda/timer.h> - -#include <net/irda/irlan_common.h> -#include <net/irda/irlan_event.h> -#include <net/irda/irlan_eth.h> -#include <net/irda/irlan_provider.h> -#include <net/irda/irlan_client.h> - -#undef CONFIG_IRLAN_GRATUITOUS_ARP - -static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *); -static int irlan_client_ctrl_data_indication(void *instance, void *sap, - struct sk_buff *skb); -static void irlan_client_ctrl_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *); -static void irlan_check_response_param(struct irlan_cb *self, char *param, - char *value, int val_len); -static void irlan_client_open_ctrl_tsap(struct irlan_cb *self); - -static void irlan_client_kick_timer_expired(void *data) -{ - struct irlan_cb *self = (struct irlan_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* - * If we are in peer mode, the client may not have got the discovery - * indication it needs to make progress. If the client is still in - * IDLE state, we must kick it to, but only if the provider is not IDLE - */ - if ((self->provider.access_type == ACCESS_PEER) && - (self->client.state == IRLAN_IDLE) && - (self->provider.state != IRLAN_IDLE)) { - irlan_client_wakeup(self, self->saddr, self->daddr); - } -} - -static void irlan_client_start_kick_timer(struct irlan_cb *self, int timeout) -{ - irda_start_timer(&self->client.kick_timer, timeout, (void *) self, - irlan_client_kick_timer_expired); -} - -/* - * Function irlan_client_wakeup (self, saddr, daddr) - * - * Wake up client - * - */ -void irlan_client_wakeup(struct irlan_cb *self, __u32 saddr, __u32 daddr) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* - * Check if we are already awake, or if we are a provider in direct - * mode (in that case we must leave the client idle - */ - if ((self->client.state != IRLAN_IDLE) || - (self->provider.access_type == ACCESS_DIRECT)) - { - pr_debug("%s(), already awake!\n", __func__); - return; - } - - /* Addresses may have changed! */ - self->saddr = saddr; - self->daddr = daddr; - - if (self->disconnect_reason == LM_USER_REQUEST) { - pr_debug("%s(), still stopped by user\n", __func__); - return; - } - - /* Open TSAPs */ - irlan_client_open_ctrl_tsap(self); - irlan_open_data_tsap(self); - - irlan_do_client_event(self, IRLAN_DISCOVERY_INDICATION, NULL); - - /* Start kick timer */ - irlan_client_start_kick_timer(self, 2*HZ); -} - -/* - * Function irlan_discovery_indication (daddr) - * - * Remote device with IrLAN server support discovered - * - */ -void irlan_client_discovery_indication(discinfo_t *discovery, - DISCOVERY_MODE mode, - void *priv) -{ - struct irlan_cb *self; - __u32 saddr, daddr; - - IRDA_ASSERT(discovery != NULL, return;); - - /* - * I didn't check it, but I bet that IrLAN suffer from the same - * deficiency as IrComm and doesn't handle two instances - * simultaneously connecting to each other. - * Same workaround, drop passive discoveries. - * Jean II */ - if(mode == DISCOVERY_PASSIVE) - return; - - saddr = discovery->saddr; - daddr = discovery->daddr; - - /* Find instance */ - rcu_read_lock(); - self = irlan_get_any(); - if (self) { - IRDA_ASSERT(self->magic == IRLAN_MAGIC, goto out;); - - pr_debug("%s(), Found instance (%08x)!\n", __func__ , - daddr); - - irlan_client_wakeup(self, saddr, daddr); - } -IRDA_ASSERT_LABEL(out:) - rcu_read_unlock(); -} - -/* - * Function irlan_client_data_indication (handle, skb) - * - * This function gets the data that is received on the control channel - * - */ -static int irlan_client_ctrl_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct irlan_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - irlan_do_client_event(self, IRLAN_DATA_INDICATION, skb); - - /* Ready for a new command */ - pr_debug("%s(), clearing tx_busy\n", __func__); - self->client.tx_busy = FALSE; - - /* Check if we have some queued commands waiting to be sent */ - irlan_run_ctrl_tx_queue(self); - - return 0; -} - -static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *userdata) -{ - struct irlan_cb *self; - struct tsap_cb *tsap; - struct sk_buff *skb; - - pr_debug("%s(), reason=%d\n", __func__ , reason); - - self = instance; - tsap = sap; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - IRDA_ASSERT(tsap != NULL, return;); - IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); - - IRDA_ASSERT(tsap == self->client.tsap_ctrl, return;); - - /* Remove frames queued on the control channel */ - while ((skb = skb_dequeue(&self->client.txq)) != NULL) { - dev_kfree_skb(skb); - } - self->client.tx_busy = FALSE; - - irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); -} - -/* - * Function irlan_client_open_tsaps (self) - * - * Initialize callbacks and open IrTTP TSAPs - * - */ -static void irlan_client_open_ctrl_tsap(struct irlan_cb *self) -{ - struct tsap_cb *tsap; - notify_t notify; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* Check if already open */ - if (self->client.tsap_ctrl) - return; - - irda_notify_init(¬ify); - - /* Set up callbacks */ - notify.data_indication = irlan_client_ctrl_data_indication; - notify.connect_confirm = irlan_client_ctrl_connect_confirm; - notify.disconnect_indication = irlan_client_ctrl_disconnect_indication; - notify.instance = self; - strlcpy(notify.name, "IrLAN ctrl (c)", sizeof(notify.name)); - - tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, ¬ify); - if (!tsap) { - pr_debug("%s(), Got no tsap!\n", __func__); - return; - } - self->client.tsap_ctrl = tsap; -} - -/* - * Function irlan_client_connect_confirm (handle, skb) - * - * Connection to peer IrLAN laye confirmed - * - */ -static void irlan_client_ctrl_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct irlan_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - self->client.max_sdu_size = max_sdu_size; - self->client.max_header_size = max_header_size; - - /* TODO: we could set the MTU depending on the max_sdu_size */ - - irlan_do_client_event(self, IRLAN_CONNECT_COMPLETE, NULL); -} - -/* - * Function print_ret_code (code) - * - * Print return code of request to peer IrLAN layer. - * - */ -static void print_ret_code(__u8 code) -{ - switch(code) { - case 0: - printk(KERN_INFO "Success\n"); - break; - case 1: - net_warn_ratelimited("IrLAN: Insufficient resources\n"); - break; - case 2: - net_warn_ratelimited("IrLAN: Invalid command format\n"); - break; - case 3: - net_warn_ratelimited("IrLAN: Command not supported\n"); - break; - case 4: - net_warn_ratelimited("IrLAN: Parameter not supported\n"); - break; - case 5: - net_warn_ratelimited("IrLAN: Value not supported\n"); - break; - case 6: - net_warn_ratelimited("IrLAN: Not open\n"); - break; - case 7: - net_warn_ratelimited("IrLAN: Authentication required\n"); - break; - case 8: - net_warn_ratelimited("IrLAN: Invalid password\n"); - break; - case 9: - net_warn_ratelimited("IrLAN: Protocol error\n"); - break; - case 255: - net_warn_ratelimited("IrLAN: Asynchronous status\n"); - break; - } -} - -/* - * Function irlan_client_parse_response (self, skb) - * - * Extract all parameters from received buffer, then feed them to - * check_params for parsing - */ -void irlan_client_parse_response(struct irlan_cb *self, struct sk_buff *skb) -{ - __u8 *frame; - __u8 *ptr; - int count; - int ret; - __u16 val_len; - int i; - char *name; - char *value; - - IRDA_ASSERT(skb != NULL, return;); - - pr_debug("%s() skb->len=%d\n", __func__ , (int)skb->len); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - if (!skb) { - net_err_ratelimited("%s(), Got NULL skb!\n", __func__); - return; - } - frame = skb->data; - - /* - * Check return code and print it if not success - */ - if (frame[0]) { - print_ret_code(frame[0]); - return; - } - - name = kmalloc(255, GFP_ATOMIC); - if (!name) - return; - value = kmalloc(1016, GFP_ATOMIC); - if (!value) { - kfree(name); - return; - } - - /* How many parameters? */ - count = frame[1]; - - pr_debug("%s(), got %d parameters\n", __func__ , count); - - ptr = frame+2; - - /* For all parameters */ - for (i=0; i<count;i++) { - ret = irlan_extract_param(ptr, name, value, &val_len); - if (ret < 0) { - pr_debug("%s(), IrLAN, Error!\n", __func__); - break; - } - ptr += ret; - irlan_check_response_param(self, name, value, val_len); - } - /* Cleanup */ - kfree(name); - kfree(value); -} - -/* - * Function irlan_check_response_param (self, param, value, val_len) - * - * Check which parameter is received and update local variables - * - */ -static void irlan_check_response_param(struct irlan_cb *self, char *param, - char *value, int val_len) -{ - __u16 tmp_cpu; /* Temporary value in host order */ - __u8 *bytes; - int i; - - pr_debug("%s(), parm=%s\n", __func__ , param); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* Media type */ - if (strcmp(param, "MEDIA") == 0) { - if (strcmp(value, "802.3") == 0) - self->media = MEDIA_802_3; - else - self->media = MEDIA_802_5; - return; - } - if (strcmp(param, "FILTER_TYPE") == 0) { - if (strcmp(value, "DIRECTED") == 0) - self->client.filter_type |= IRLAN_DIRECTED; - else if (strcmp(value, "FUNCTIONAL") == 0) - self->client.filter_type |= IRLAN_FUNCTIONAL; - else if (strcmp(value, "GROUP") == 0) - self->client.filter_type |= IRLAN_GROUP; - else if (strcmp(value, "MAC_FRAME") == 0) - self->client.filter_type |= IRLAN_MAC_FRAME; - else if (strcmp(value, "MULTICAST") == 0) - self->client.filter_type |= IRLAN_MULTICAST; - else if (strcmp(value, "BROADCAST") == 0) - self->client.filter_type |= IRLAN_BROADCAST; - else if (strcmp(value, "IPX_SOCKET") == 0) - self->client.filter_type |= IRLAN_IPX_SOCKET; - - } - if (strcmp(param, "ACCESS_TYPE") == 0) { - if (strcmp(value, "DIRECT") == 0) - self->client.access_type = ACCESS_DIRECT; - else if (strcmp(value, "PEER") == 0) - self->client.access_type = ACCESS_PEER; - else if (strcmp(value, "HOSTED") == 0) - self->client.access_type = ACCESS_HOSTED; - else { - pr_debug("%s(), unknown access type!\n", __func__); - } - } - /* IRLAN version */ - if (strcmp(param, "IRLAN_VER") == 0) { - pr_debug("IrLAN version %d.%d\n", (__u8)value[0], - (__u8)value[1]); - - self->version[0] = value[0]; - self->version[1] = value[1]; - return; - } - /* Which remote TSAP to use for data channel */ - if (strcmp(param, "DATA_CHAN") == 0) { - self->dtsap_sel_data = value[0]; - pr_debug("Data TSAP = %02x\n", self->dtsap_sel_data); - return; - } - if (strcmp(param, "CON_ARB") == 0) { - memcpy(&tmp_cpu, value, 2); /* Align value */ - le16_to_cpus(&tmp_cpu); /* Convert to host order */ - self->client.recv_arb_val = tmp_cpu; - pr_debug("%s(), receive arb val=%d\n", __func__ , - self->client.recv_arb_val); - } - if (strcmp(param, "MAX_FRAME") == 0) { - memcpy(&tmp_cpu, value, 2); /* Align value */ - le16_to_cpus(&tmp_cpu); /* Convert to host order */ - self->client.max_frame = tmp_cpu; - pr_debug("%s(), max frame=%d\n", __func__ , - self->client.max_frame); - } - - /* RECONNECT_KEY, in case the link goes down! */ - if (strcmp(param, "RECONNECT_KEY") == 0) { - pr_debug("Got reconnect key: "); - /* for (i = 0; i < val_len; i++) */ -/* printk("%02x", value[i]); */ - memcpy(self->client.reconnect_key, value, val_len); - self->client.key_len = val_len; - pr_debug("\n"); - } - /* FILTER_ENTRY, have we got an ethernet address? */ - if (strcmp(param, "FILTER_ENTRY") == 0) { - bytes = value; - pr_debug("Ethernet address = %pM\n", bytes); - for (i = 0; i < 6; i++) - self->dev->dev_addr[i] = bytes[i]; - } -} - -/* - * Function irlan_client_get_value_confirm (obj_id, value) - * - * Got results from remote LM-IAS - * - */ -void irlan_client_get_value_confirm(int result, __u16 obj_id, - struct ias_value *value, void *priv) -{ - struct irlan_cb *self; - - IRDA_ASSERT(priv != NULL, return;); - - self = priv; - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* We probably don't need to make any more queries */ - iriap_close(self->client.iriap); - self->client.iriap = NULL; - - /* Check if request succeeded */ - if (result != IAS_SUCCESS) { - pr_debug("%s(), got NULL value!\n", __func__); - irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, - NULL); - return; - } - - switch (value->type) { - case IAS_INTEGER: - self->dtsap_sel_ctrl = value->t.integer; - - if (value->t.integer != -1) { - irlan_do_client_event(self, IRLAN_IAS_PROVIDER_AVAIL, - NULL); - return; - } - irias_delete_value(value); - break; - default: - pr_debug("%s(), unknown type!\n", __func__); - break; - } - irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, NULL); -} diff --git a/net/irda/irlan/irlan_client_event.c b/net/irda/irlan/irlan_client_event.c deleted file mode 100644 index cc93fabbbb19..000000000000 --- a/net/irda/irlan/irlan_client_event.c +++ /dev/null @@ -1,511 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_client_event.c - * Version: 0.9 - * Description: IrLAN client state machine - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 31 20:14:37 1997 - * Modified at: Sun Dec 26 21:52:24 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/skbuff.h> - -#include <net/irda/irda.h> -#include <net/irda/timer.h> -#include <net/irda/irmod.h> -#include <net/irda/iriap.h> -#include <net/irda/irlmp.h> -#include <net/irda/irttp.h> - -#include <net/irda/irlan_common.h> -#include <net/irda/irlan_client.h> -#include <net/irda/irlan_event.h> - -static int irlan_client_state_idle (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_conn (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_info (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_open (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_wait (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_arb (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_data (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_client_state_sync (struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); - -static int (*state[])(struct irlan_cb *, IRLAN_EVENT event, struct sk_buff *) = -{ - irlan_client_state_idle, - irlan_client_state_query, - irlan_client_state_conn, - irlan_client_state_info, - irlan_client_state_media, - irlan_client_state_open, - irlan_client_state_wait, - irlan_client_state_arb, - irlan_client_state_data, - irlan_client_state_close, - irlan_client_state_sync -}; - -void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - (*state[ self->client.state]) (self, event, skb); -} - -/* - * Function irlan_client_state_idle (event, skb, info) - * - * IDLE, We are waiting for an indication that there is a provider - * available. - */ -static int irlan_client_state_idle(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - switch (event) { - case IRLAN_DISCOVERY_INDICATION: - if (self->client.iriap) { - net_warn_ratelimited("%s(), busy with a previous query\n", - __func__); - return -EBUSY; - } - - self->client.iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - irlan_client_get_value_confirm); - /* Get some values from peer IAS */ - irlan_next_client_state(self, IRLAN_QUERY); - iriap_getvaluebyclass_request(self->client.iriap, - self->saddr, self->daddr, - "IrLAN", "IrDA:TinyTP:LsapSel"); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_query (event, skb, info) - * - * QUERY, We have queryed the remote IAS and is ready to connect - * to provider, just waiting for the confirm. - * - */ -static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - switch(event) { - case IRLAN_IAS_PROVIDER_AVAIL: - IRDA_ASSERT(self->dtsap_sel_ctrl != 0, return -1;); - - self->client.open_retries = 0; - - irttp_connect_request(self->client.tsap_ctrl, - self->dtsap_sel_ctrl, - self->saddr, self->daddr, NULL, - IRLAN_MTU, NULL); - irlan_next_client_state(self, IRLAN_CONN); - break; - case IRLAN_IAS_PROVIDER_NOT_AVAIL: - pr_debug("%s(), IAS_PROVIDER_NOT_AVAIL\n", __func__); - irlan_next_client_state(self, IRLAN_IDLE); - - /* Give the client a kick! */ - if ((self->provider.access_type == ACCESS_PEER) && - (self->provider.state != IRLAN_IDLE)) - irlan_client_wakeup(self, self->saddr, self->daddr); - break; - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_conn (event, skb, info) - * - * CONN, We have connected to a provider but has not issued any - * commands yet. - * - */ -static int irlan_client_state_conn(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - - switch (event) { - case IRLAN_CONNECT_COMPLETE: - /* Send getinfo cmd */ - irlan_get_provider_info(self); - irlan_next_client_state(self, IRLAN_INFO); - break; - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_info (self, event, skb, info) - * - * INFO, We have issued a GetInfo command and is awaiting a reply. - */ -static int irlan_client_state_info(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - - switch (event) { - case IRLAN_DATA_INDICATION: - IRDA_ASSERT(skb != NULL, return -1;); - - irlan_client_parse_response(self, skb); - - irlan_next_client_state(self, IRLAN_MEDIA); - - irlan_get_media_char(self); - break; - - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_media (self, event, skb, info) - * - * MEDIA, The irlan_client has issued a GetMedia command and is awaiting a - * reply. - * - */ -static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_DATA_INDICATION: - irlan_client_parse_response(self, skb); - irlan_open_data_channel(self); - irlan_next_client_state(self, IRLAN_OPEN); - break; - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_open (self, event, skb, info) - * - * OPEN, The irlan_client has issued a OpenData command and is awaiting a - * reply - * - */ -static int irlan_client_state_open(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - struct qos_info qos; - - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_DATA_INDICATION: - irlan_client_parse_response(self, skb); - - /* - * Check if we have got the remote TSAP for data - * communications - */ - IRDA_ASSERT(self->dtsap_sel_data != 0, return -1;); - - /* Check which access type we are dealing with */ - switch (self->client.access_type) { - case ACCESS_PEER: - if (self->provider.state == IRLAN_OPEN) { - - irlan_next_client_state(self, IRLAN_ARB); - irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, - NULL); - } else { - - irlan_next_client_state(self, IRLAN_WAIT); - } - break; - case ACCESS_DIRECT: - case ACCESS_HOSTED: - qos.link_disc_time.bits = 0x01; /* 3 secs */ - - irttp_connect_request(self->tsap_data, - self->dtsap_sel_data, - self->saddr, self->daddr, &qos, - IRLAN_MTU, NULL); - - irlan_next_client_state(self, IRLAN_DATA); - break; - default: - pr_debug("%s(), unknown access type!\n", __func__); - break; - } - break; - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_wait (self, event, skb, info) - * - * WAIT, The irlan_client is waiting for the local provider to enter the - * provider OPEN state. - * - */ -static int irlan_client_state_wait(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_PROVIDER_SIGNAL: - irlan_next_client_state(self, IRLAN_ARB); - irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, NULL); - break; - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -static int irlan_client_state_arb(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - struct qos_info qos; - - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_CHECK_CON_ARB: - if (self->client.recv_arb_val == self->provider.send_arb_val) { - irlan_next_client_state(self, IRLAN_CLOSE); - irlan_close_data_channel(self); - } else if (self->client.recv_arb_val < - self->provider.send_arb_val) - { - qos.link_disc_time.bits = 0x01; /* 3 secs */ - - irlan_next_client_state(self, IRLAN_DATA); - irttp_connect_request(self->tsap_data, - self->dtsap_sel_data, - self->saddr, self->daddr, &qos, - IRLAN_MTU, NULL); - } else if (self->client.recv_arb_val > - self->provider.send_arb_val) - { - pr_debug("%s(), lost the battle :-(\n", __func__); - } - break; - case IRLAN_DATA_CONNECT_INDICATION: - irlan_next_client_state(self, IRLAN_DATA); - break; - case IRLAN_LMP_DISCONNECT: - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - case IRLAN_WATCHDOG_TIMEOUT: - pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_data (self, event, skb, info) - * - * DATA, The data channel is connected, allowing data transfers between - * the local and remote machines. - * - */ -static int irlan_client_state_data(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - switch(event) { - case IRLAN_DATA_INDICATION: - irlan_client_parse_response(self, skb); - break; - case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ - case IRLAN_LAP_DISCONNECT: - irlan_next_client_state(self, IRLAN_IDLE); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_close (self, event, skb, info) - * - * - * - */ -static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_client_state_sync (self, event, skb, info) - * - * - * - */ -static int irlan_client_state_sync(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - if (skb) - dev_kfree_skb(skb); - - return 0; -} - - - - - - - - - - - - - diff --git a/net/irda/irlan/irlan_common.c b/net/irda/irlan/irlan_common.c deleted file mode 100644 index 481bbc2a4349..000000000000 --- a/net/irda/irlan/irlan_common.c +++ /dev/null @@ -1,1176 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_common.c - * Version: 0.9 - * Description: IrDA LAN Access Protocol Implementation - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 31 20:14:37 1997 - * Modified at: Sun Dec 26 21:53:10 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/gfp.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/sched.h> -#include <linux/seq_file.h> -#include <linux/random.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/rtnetlink.h> -#include <linux/moduleparam.h> -#include <linux/bitops.h> - -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/irttp.h> -#include <net/irda/irlmp.h> -#include <net/irda/iriap.h> -#include <net/irda/timer.h> - -#include <net/irda/irlan_common.h> -#include <net/irda/irlan_client.h> -#include <net/irda/irlan_provider.h> -#include <net/irda/irlan_eth.h> -#include <net/irda/irlan_filter.h> - - -/* extern char sysctl_devname[]; */ - -/* - * Master structure - */ -static LIST_HEAD(irlans); - -static void *ckey; -static void *skey; - -/* Module parameters */ -static bool eth; /* Use "eth" or "irlan" name for devices */ -static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */ - -#ifdef CONFIG_PROC_FS -static const char *const irlan_access[] = { - "UNKNOWN", - "DIRECT", - "PEER", - "HOSTED" -}; - -static const char *const irlan_media[] = { - "UNKNOWN", - "802.3", - "802.5" -}; - -extern struct proc_dir_entry *proc_irda; - -static int irlan_seq_open(struct inode *inode, struct file *file); - -static const struct file_operations irlan_fops = { - .owner = THIS_MODULE, - .open = irlan_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -extern struct proc_dir_entry *proc_irda; -#endif /* CONFIG_PROC_FS */ - -static struct irlan_cb __init *irlan_open(__u32 saddr, __u32 daddr); -static void __irlan_close(struct irlan_cb *self); -static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, - __u8 value_byte, __u16 value_short, - __u8 *value_array, __u16 value_len); -static void irlan_open_unicast_addr(struct irlan_cb *self); -static void irlan_get_unicast_addr(struct irlan_cb *self); -void irlan_close_tsaps(struct irlan_cb *self); - -/* - * Function irlan_init (void) - * - * Initialize IrLAN layer - * - */ -static int __init irlan_init(void) -{ - struct irlan_cb *new; - __u16 hints; - -#ifdef CONFIG_PROC_FS - { struct proc_dir_entry *proc; - proc = proc_create("irlan", 0, proc_irda, &irlan_fops); - if (!proc) { - printk(KERN_ERR "irlan_init: can't create /proc entry!\n"); - return -ENODEV; - } - } -#endif /* CONFIG_PROC_FS */ - - hints = irlmp_service_to_hint(S_LAN); - - /* Register with IrLMP as a client */ - ckey = irlmp_register_client(hints, &irlan_client_discovery_indication, - NULL, NULL); - if (!ckey) - goto err_ckey; - - /* Register with IrLMP as a service */ - skey = irlmp_register_service(hints); - if (!skey) - goto err_skey; - - /* Start the master IrLAN instance (the only one for now) */ - new = irlan_open(DEV_ADDR_ANY, DEV_ADDR_ANY); - if (!new) - goto err_open; - - /* The master will only open its (listen) control TSAP */ - irlan_provider_open_ctrl_tsap(new); - - /* Do some fast discovery! */ - irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); - - return 0; - -err_open: - irlmp_unregister_service(skey); -err_skey: - irlmp_unregister_client(ckey); -err_ckey: -#ifdef CONFIG_PROC_FS - remove_proc_entry("irlan", proc_irda); -#endif /* CONFIG_PROC_FS */ - - return -ENOMEM; -} - -static void __exit irlan_cleanup(void) -{ - struct irlan_cb *self, *next; - - irlmp_unregister_client(ckey); - irlmp_unregister_service(skey); - -#ifdef CONFIG_PROC_FS - remove_proc_entry("irlan", proc_irda); -#endif /* CONFIG_PROC_FS */ - - /* Cleanup any leftover network devices */ - rtnl_lock(); - list_for_each_entry_safe(self, next, &irlans, dev_list) { - __irlan_close(self); - } - rtnl_unlock(); -} - -/* - * Function irlan_open (void) - * - * Open new instance of a client/provider, we should only register the - * network device if this instance is ment for a particular client/provider - */ -static struct irlan_cb __init *irlan_open(__u32 saddr, __u32 daddr) -{ - struct net_device *dev; - struct irlan_cb *self; - - /* Create network device with irlan */ - dev = alloc_irlandev(eth ? "eth%d" : "irlan%d"); - if (!dev) - return NULL; - - self = netdev_priv(dev); - self->dev = dev; - - /* - * Initialize local device structure - */ - self->magic = IRLAN_MAGIC; - self->saddr = saddr; - self->daddr = daddr; - - /* Provider access can only be PEER, DIRECT, or HOSTED */ - self->provider.access_type = access; - if (access == ACCESS_DIRECT) { - /* - * Since we are emulating an IrLAN sever we will have to - * give ourself an ethernet address! - */ - dev->dev_addr[0] = 0x40; - dev->dev_addr[1] = 0x00; - dev->dev_addr[2] = 0x00; - dev->dev_addr[3] = 0x00; - get_random_bytes(dev->dev_addr+4, 1); - get_random_bytes(dev->dev_addr+5, 1); - } - - self->media = MEDIA_802_3; - self->disconnect_reason = LM_USER_REQUEST; - init_timer(&self->watchdog_timer); - init_timer(&self->client.kick_timer); - init_waitqueue_head(&self->open_wait); - - skb_queue_head_init(&self->client.txq); - - irlan_next_client_state(self, IRLAN_IDLE); - irlan_next_provider_state(self, IRLAN_IDLE); - - if (register_netdev(dev)) { - pr_debug("%s(), register_netdev() failed!\n", - __func__); - self = NULL; - free_netdev(dev); - } else { - rtnl_lock(); - list_add_rcu(&self->dev_list, &irlans); - rtnl_unlock(); - } - - return self; -} -/* - * Function __irlan_close (self) - * - * This function closes and deallocates the IrLAN client instances. Be - * aware that other functions which calls client_close() must - * remove self from irlans list first. - */ -static void __irlan_close(struct irlan_cb *self) -{ - ASSERT_RTNL(); - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - del_timer_sync(&self->watchdog_timer); - del_timer_sync(&self->client.kick_timer); - - /* Close all open connections and remove TSAPs */ - irlan_close_tsaps(self); - - if (self->client.iriap) - iriap_close(self->client.iriap); - - /* Remove frames queued on the control channel */ - skb_queue_purge(&self->client.txq); - - /* Unregister and free self via destructor */ - unregister_netdevice(self->dev); -} - -/* Find any instance of irlan, used for client discovery wakeup */ -struct irlan_cb *irlan_get_any(void) -{ - struct irlan_cb *self; - - list_for_each_entry_rcu(self, &irlans, dev_list) { - return self; - } - return NULL; -} - -/* - * Function irlan_connect_indication (instance, sap, qos, max_sdu_size, skb) - * - * Here we receive the connect indication for the data channel - * - */ -static void irlan_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct irlan_cb *self; - struct tsap_cb *tsap; - - self = instance; - tsap = sap; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - IRDA_ASSERT(tsap == self->tsap_data,return;); - - self->max_sdu_size = max_sdu_size; - self->max_header_size = max_header_size; - - pr_debug("%s: We are now connected!\n", __func__); - - del_timer(&self->watchdog_timer); - - /* If you want to pass the skb to *both* state machines, you will - * need to skb_clone() it, so that you don't free it twice. - * As the state machines don't need it, git rid of it here... - * Jean II */ - if (skb) - dev_kfree_skb(skb); - - irlan_do_provider_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL); - irlan_do_client_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL); - - if (self->provider.access_type == ACCESS_PEER) { - /* - * Data channel is open, so we are now allowed to - * configure the remote filter - */ - irlan_get_unicast_addr(self); - irlan_open_unicast_addr(self); - } - /* Ready to transfer Ethernet frames (at last) */ - netif_start_queue(self->dev); /* Clear reason */ -} - -static void irlan_connect_confirm(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct irlan_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - self->max_sdu_size = max_sdu_size; - self->max_header_size = max_header_size; - - /* TODO: we could set the MTU depending on the max_sdu_size */ - - pr_debug("%s: We are now connected!\n", __func__); - del_timer(&self->watchdog_timer); - - /* - * Data channel is open, so we are now allowed to configure the remote - * filter - */ - irlan_get_unicast_addr(self); - irlan_open_unicast_addr(self); - - /* Open broadcast and multicast filter by default */ - irlan_set_broadcast_filter(self, TRUE); - irlan_set_multicast_filter(self, TRUE); - - /* Ready to transfer Ethernet frames */ - netif_start_queue(self->dev); - self->disconnect_reason = 0; /* Clear reason */ - wake_up_interruptible(&self->open_wait); -} - -/* - * Function irlan_client_disconnect_indication (handle) - * - * Callback function for the IrTTP layer. Indicates a disconnection of - * the specified connection (handle) - */ -static void irlan_disconnect_indication(void *instance, - void *sap, LM_REASON reason, - struct sk_buff *userdata) -{ - struct irlan_cb *self; - struct tsap_cb *tsap; - - pr_debug("%s(), reason=%d\n", __func__ , reason); - - self = instance; - tsap = sap; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - IRDA_ASSERT(tsap != NULL, return;); - IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); - - IRDA_ASSERT(tsap == self->tsap_data, return;); - - pr_debug("IrLAN, data channel disconnected by peer!\n"); - - /* Save reason so we know if we should try to reconnect or not */ - self->disconnect_reason = reason; - - switch (reason) { - case LM_USER_REQUEST: /* User request */ - pr_debug("%s(), User requested\n", __func__); - break; - case LM_LAP_DISCONNECT: /* Unexpected IrLAP disconnect */ - pr_debug("%s(), Unexpected IrLAP disconnect\n", __func__); - break; - case LM_CONNECT_FAILURE: /* Failed to establish IrLAP connection */ - pr_debug("%s(), IrLAP connect failed\n", __func__); - break; - case LM_LAP_RESET: /* IrLAP reset */ - pr_debug("%s(), IrLAP reset\n", __func__); - break; - case LM_INIT_DISCONNECT: - pr_debug("%s(), IrLMP connect failed\n", __func__); - break; - default: - net_err_ratelimited("%s(), Unknown disconnect reason\n", - __func__); - break; - } - - /* If you want to pass the skb to *both* state machines, you will - * need to skb_clone() it, so that you don't free it twice. - * As the state machines don't need it, git rid of it here... - * Jean II */ - if (userdata) - dev_kfree_skb(userdata); - - irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); - irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); - - wake_up_interruptible(&self->open_wait); -} - -void irlan_open_data_tsap(struct irlan_cb *self) -{ - struct tsap_cb *tsap; - notify_t notify; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* Check if already open */ - if (self->tsap_data) - return; - - irda_notify_init(¬ify); - - notify.data_indication = irlan_eth_receive; - notify.udata_indication = irlan_eth_receive; - notify.connect_indication = irlan_connect_indication; - notify.connect_confirm = irlan_connect_confirm; - notify.flow_indication = irlan_eth_flow_indication; - notify.disconnect_indication = irlan_disconnect_indication; - notify.instance = self; - strlcpy(notify.name, "IrLAN data", sizeof(notify.name)); - - tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, ¬ify); - if (!tsap) { - pr_debug("%s(), Got no tsap!\n", __func__); - return; - } - self->tsap_data = tsap; - - /* - * This is the data TSAP selector which we will pass to the client - * when the client ask for it. - */ - self->stsap_sel_data = self->tsap_data->stsap_sel; -} - -void irlan_close_tsaps(struct irlan_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* Disconnect and close all open TSAP connections */ - if (self->tsap_data) { - irttp_disconnect_request(self->tsap_data, NULL, P_NORMAL); - irttp_close_tsap(self->tsap_data); - self->tsap_data = NULL; - } - if (self->client.tsap_ctrl) { - irttp_disconnect_request(self->client.tsap_ctrl, NULL, - P_NORMAL); - irttp_close_tsap(self->client.tsap_ctrl); - self->client.tsap_ctrl = NULL; - } - if (self->provider.tsap_ctrl) { - irttp_disconnect_request(self->provider.tsap_ctrl, NULL, - P_NORMAL); - irttp_close_tsap(self->provider.tsap_ctrl); - self->provider.tsap_ctrl = NULL; - } - self->disconnect_reason = LM_USER_REQUEST; -} - -/* - * Function irlan_ias_register (self, tsap_sel) - * - * Register with LM-IAS - * - */ -void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel) -{ - struct ias_object *obj; - struct ias_value *new_value; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* - * Check if object has already been registered by a previous provider. - * If that is the case, we just change the value of the attribute - */ - if (!irias_find_object("IrLAN")) { - obj = irias_new_object("IrLAN", IAS_IRLAN_ID); - irias_add_integer_attrib(obj, "IrDA:TinyTP:LsapSel", tsap_sel, - IAS_KERNEL_ATTR); - irias_insert_object(obj); - } else { - new_value = irias_new_integer_value(tsap_sel); - irias_object_change_attribute("IrLAN", "IrDA:TinyTP:LsapSel", - new_value); - } - - /* Register PnP object only if not registered before */ - if (!irias_find_object("PnP")) { - obj = irias_new_object("PnP", IAS_PNP_ID); -#if 0 - irias_add_string_attrib(obj, "Name", sysctl_devname, - IAS_KERNEL_ATTR); -#else - irias_add_string_attrib(obj, "Name", "Linux", IAS_KERNEL_ATTR); -#endif - irias_add_string_attrib(obj, "DeviceID", "HWP19F0", - IAS_KERNEL_ATTR); - irias_add_integer_attrib(obj, "CompCnt", 1, IAS_KERNEL_ATTR); - if (self->provider.access_type == ACCESS_PEER) - irias_add_string_attrib(obj, "Comp#01", "PNP8389", - IAS_KERNEL_ATTR); - else - irias_add_string_attrib(obj, "Comp#01", "PNP8294", - IAS_KERNEL_ATTR); - - irias_add_string_attrib(obj, "Manufacturer", - "Linux-IrDA Project", IAS_KERNEL_ATTR); - irias_insert_object(obj); - } -} - -/* - * Function irlan_run_ctrl_tx_queue (self) - * - * Try to send the next command in the control transmit queue - * - */ -int irlan_run_ctrl_tx_queue(struct irlan_cb *self) -{ - struct sk_buff *skb; - - if (irda_lock(&self->client.tx_busy) == FALSE) - return -EBUSY; - - skb = skb_dequeue(&self->client.txq); - if (!skb) { - self->client.tx_busy = FALSE; - return 0; - } - - /* Check that it's really possible to send commands */ - if ((self->client.tsap_ctrl == NULL) || - (self->client.state == IRLAN_IDLE)) - { - self->client.tx_busy = FALSE; - dev_kfree_skb(skb); - return -1; - } - pr_debug("%s(), sending ...\n", __func__); - - return irttp_data_request(self->client.tsap_ctrl, skb); -} - -/* - * Function irlan_ctrl_data_request (self, skb) - * - * This function makes sure that commands on the control channel is being - * sent in a command/response fashion - */ -static void irlan_ctrl_data_request(struct irlan_cb *self, struct sk_buff *skb) -{ - /* Queue command */ - skb_queue_tail(&self->client.txq, skb); - - /* Try to send command */ - irlan_run_ctrl_tx_queue(self); -} - -/* - * Function irlan_get_provider_info (self) - * - * Send Get Provider Information command to peer IrLAN layer - * - */ -void irlan_get_provider_info(struct irlan_cb *self) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER, - GFP_ATOMIC); - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - frame[0] = CMD_GET_PROVIDER_INFO; - frame[1] = 0x00; /* Zero parameters */ - - irlan_ctrl_data_request(self, skb); -} - -/* - * Function irlan_open_data_channel (self) - * - * Send an Open Data Command to provider - * - */ -void irlan_open_data_channel(struct irlan_cb *self) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3") + - IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "DIRECT"), - GFP_ATOMIC); - if (!skb) - return; - - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - /* Build frame */ - frame[0] = CMD_OPEN_DATA_CHANNEL; - frame[1] = 0x02; /* Two parameters */ - - irlan_insert_string_param(skb, "MEDIA", "802.3"); - irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT"); - /* irlan_insert_string_param(skb, "MODE", "UNRELIABLE"); */ - -/* self->use_udata = TRUE; */ - - irlan_ctrl_data_request(self, skb); -} - -void irlan_close_data_channel(struct irlan_cb *self) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* Check if the TSAP is still there */ - if (self->client.tsap_ctrl == NULL) - return; - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN"), - GFP_ATOMIC); - if (!skb) - return; - - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - /* Build frame */ - frame[0] = CMD_CLOSE_DATA_CHAN; - frame[1] = 0x01; /* One parameter */ - - irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); - - irlan_ctrl_data_request(self, skb); -} - -/* - * Function irlan_open_unicast_addr (self) - * - * Make IrLAN provider accept ethernet frames addressed to the unicast - * address. - * - */ -static void irlan_open_unicast_addr(struct irlan_cb *self) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + - IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"), - GFP_ATOMIC); - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - frame[0] = CMD_FILTER_OPERATION; - frame[1] = 0x03; /* Three parameters */ - irlan_insert_byte_param(skb, "DATA_CHAN" , self->dtsap_sel_data); - irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); - irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); - - irlan_ctrl_data_request(self, skb); -} - -/* - * Function irlan_set_broadcast_filter (self, status) - * - * Make IrLAN provider accept ethernet frames addressed to the broadcast - * address. Be careful with the use of this one, since there may be a lot - * of broadcast traffic out there. We can still function without this - * one but then _we_ have to initiate all communication with other - * hosts, since ARP request for this host will not be answered. - */ -void irlan_set_broadcast_filter(struct irlan_cb *self, int status) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") + - /* We may waste one byte here...*/ - IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"), - GFP_ATOMIC); - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - frame[0] = CMD_FILTER_OPERATION; - frame[1] = 0x03; /* Three parameters */ - irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); - irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST"); - if (status) - irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); - else - irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); - - irlan_ctrl_data_request(self, skb); -} - -/* - * Function irlan_set_multicast_filter (self, status) - * - * Make IrLAN provider accept ethernet frames addressed to the multicast - * address. - * - */ -void irlan_set_multicast_filter(struct irlan_cb *self, int status) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") + - /* We may waste one byte here...*/ - IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "NONE"), - GFP_ATOMIC); - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - frame[0] = CMD_FILTER_OPERATION; - frame[1] = 0x03; /* Three parameters */ - irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); - irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST"); - if (status) - irlan_insert_string_param(skb, "FILTER_MODE", "ALL"); - else - irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); - - irlan_ctrl_data_request(self, skb); -} - -/* - * Function irlan_get_unicast_addr (self) - * - * Retrieves the unicast address from the IrLAN provider. This address - * will be inserted into the devices structure, so the ethernet layer - * can construct its packets. - * - */ -static void irlan_get_unicast_addr(struct irlan_cb *self) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + - IRLAN_STRING_PARAMETER_LEN("FILTER_OPERATION", - "DYNAMIC"), - GFP_ATOMIC); - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - frame[0] = CMD_FILTER_OPERATION; - frame[1] = 0x03; /* Three parameters */ - irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); - irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); - irlan_insert_string_param(skb, "FILTER_OPERATION", "DYNAMIC"); - - irlan_ctrl_data_request(self, skb); -} - -/* - * Function irlan_get_media_char (self) - * - * - * - */ -void irlan_get_media_char(struct irlan_cb *self) -{ - struct sk_buff *skb; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3"), - GFP_ATOMIC); - - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->client.max_header_size); - skb_put(skb, 2); - - frame = skb->data; - - /* Build frame */ - frame[0] = CMD_GET_MEDIA_CHAR; - frame[1] = 0x01; /* One parameter */ - - irlan_insert_string_param(skb, "MEDIA", "802.3"); - irlan_ctrl_data_request(self, skb); -} - -/* - * Function insert_byte_param (skb, param, value) - * - * Insert byte parameter into frame - * - */ -int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value) -{ - return __irlan_insert_param(skb, param, IRLAN_BYTE, value, 0, NULL, 0); -} - -int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value) -{ - return __irlan_insert_param(skb, param, IRLAN_SHORT, 0, value, NULL, 0); -} - -/* - * Function insert_string (skb, param, value) - * - * Insert string parameter into frame - * - */ -int irlan_insert_string_param(struct sk_buff *skb, char *param, char *string) -{ - int string_len = strlen(string); - - return __irlan_insert_param(skb, param, IRLAN_ARRAY, 0, 0, string, - string_len); -} - -/* - * Function insert_array_param(skb, param, value, len_value) - * - * Insert array parameter into frame - * - */ -int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *array, - __u16 array_len) -{ - return __irlan_insert_param(skb, name, IRLAN_ARRAY, 0, 0, array, - array_len); -} - -/* - * Function insert_param (skb, param, value, byte) - * - * Insert parameter at end of buffer, structure of a parameter is: - * - * ----------------------------------------------------------------------- - * | Name Length[1] | Param Name[1..255] | Val Length[2] | Value[0..1016]| - * ----------------------------------------------------------------------- - */ -static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, - __u8 value_byte, __u16 value_short, - __u8 *value_array, __u16 value_len) -{ - __u8 *frame; - __u8 param_len; - __le16 tmp_le; /* Temporary value in little endian format */ - int n=0; - - if (skb == NULL) { - pr_debug("%s(), Got NULL skb\n", __func__); - return 0; - } - - param_len = strlen(param); - switch (type) { - case IRLAN_BYTE: - value_len = 1; - break; - case IRLAN_SHORT: - value_len = 2; - break; - case IRLAN_ARRAY: - IRDA_ASSERT(value_array != NULL, return 0;); - IRDA_ASSERT(value_len > 0, return 0;); - break; - default: - pr_debug("%s(), Unknown parameter type!\n", __func__); - return 0; - } - - /* Insert at end of sk-buffer */ - frame = skb_tail_pointer(skb); - - /* Make space for data */ - if (skb_tailroom(skb) < (param_len+value_len+3)) { - pr_debug("%s(), No more space at end of skb\n", __func__); - return 0; - } - skb_put(skb, param_len+value_len+3); - - /* Insert parameter length */ - frame[n++] = param_len; - - /* Insert parameter */ - memcpy(frame+n, param, param_len); n += param_len; - - /* Insert value length (2 byte little endian format, LSB first) */ - tmp_le = cpu_to_le16(value_len); - memcpy(frame+n, &tmp_le, 2); n += 2; /* To avoid alignment problems */ - - /* Insert value */ - switch (type) { - case IRLAN_BYTE: - frame[n++] = value_byte; - break; - case IRLAN_SHORT: - tmp_le = cpu_to_le16(value_short); - memcpy(frame+n, &tmp_le, 2); n += 2; - break; - case IRLAN_ARRAY: - memcpy(frame+n, value_array, value_len); n+=value_len; - break; - default: - break; - } - IRDA_ASSERT(n == (param_len+value_len+3), return 0;); - - return param_len+value_len+3; -} - -/* - * Function irlan_extract_param (buf, name, value, len) - * - * Extracts a single parameter name/value pair from buffer and updates - * the buffer pointer to point to the next name/value pair. - */ -int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len) -{ - __u8 name_len; - __u16 val_len; - int n=0; - - /* get length of parameter name (1 byte) */ - name_len = buf[n++]; - - if (name_len > 254) { - pr_debug("%s(), name_len > 254\n", __func__); - return -RSP_INVALID_COMMAND_FORMAT; - } - - /* get parameter name */ - memcpy(name, buf+n, name_len); - name[name_len] = '\0'; - n+=name_len; - - /* - * Get length of parameter value (2 bytes in little endian - * format) - */ - memcpy(&val_len, buf+n, 2); /* To avoid alignment problems */ - le16_to_cpus(&val_len); n+=2; - - if (val_len >= 1016) { - pr_debug("%s(), parameter length to long\n", __func__); - return -RSP_INVALID_COMMAND_FORMAT; - } - *len = val_len; - - /* get parameter value */ - memcpy(value, buf+n, val_len); - value[val_len] = '\0'; - n+=val_len; - - pr_debug("Parameter: %s ", name); - pr_debug("Value: %s\n", value); - - return n; -} - -#ifdef CONFIG_PROC_FS - -/* - * Start of reading /proc entries. - * Return entry at pos, - * or start_token to indicate print header line - * or NULL if end of file - */ -static void *irlan_seq_start(struct seq_file *seq, loff_t *pos) -{ - rcu_read_lock(); - return seq_list_start_head(&irlans, *pos); -} - -/* Return entry after v, and increment pos */ -static void *irlan_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - return seq_list_next(v, &irlans, pos); -} - -/* End of reading /proc file */ -static void irlan_seq_stop(struct seq_file *seq, void *v) -{ - rcu_read_unlock(); -} - - -/* - * Show one entry in /proc file. - */ -static int irlan_seq_show(struct seq_file *seq, void *v) -{ - if (v == &irlans) - seq_puts(seq, "IrLAN instances:\n"); - else { - struct irlan_cb *self = list_entry(v, struct irlan_cb, dev_list); - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - seq_printf(seq,"ifname: %s,\n", - self->dev->name); - seq_printf(seq,"client state: %s, ", - irlan_state[ self->client.state]); - seq_printf(seq,"provider state: %s,\n", - irlan_state[ self->provider.state]); - seq_printf(seq,"saddr: %#08x, ", - self->saddr); - seq_printf(seq,"daddr: %#08x\n", - self->daddr); - seq_printf(seq,"version: %d.%d,\n", - self->version[1], self->version[0]); - seq_printf(seq,"access type: %s\n", - irlan_access[self->client.access_type]); - seq_printf(seq,"media: %s\n", - irlan_media[self->media]); - - seq_printf(seq,"local filter:\n"); - seq_printf(seq,"remote filter: "); - irlan_print_filter(seq, self->client.filter_type); - seq_printf(seq,"tx busy: %s\n", - netif_queue_stopped(self->dev) ? "TRUE" : "FALSE"); - - seq_putc(seq,'\n'); - } - return 0; -} - -static const struct seq_operations irlan_seq_ops = { - .start = irlan_seq_start, - .next = irlan_seq_next, - .stop = irlan_seq_stop, - .show = irlan_seq_show, -}; - -static int irlan_seq_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &irlan_seq_ops); -} -#endif - -MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); -MODULE_DESCRIPTION("The Linux IrDA LAN protocol"); -MODULE_LICENSE("GPL"); - -module_param(eth, bool, 0); -MODULE_PARM_DESC(eth, "Name devices ethX (0) or irlanX (1)"); -module_param(access, int, 0); -MODULE_PARM_DESC(access, "Access type DIRECT=1, PEER=2, HOSTED=3"); - -module_init(irlan_init); -module_exit(irlan_cleanup); - diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c deleted file mode 100644 index 3be852808a9d..000000000000 --- a/net/irda/irlan/irlan_eth.c +++ /dev/null @@ -1,340 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_eth.c - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Thu Oct 15 08:37:58 1998 - * Modified at: Tue Mar 21 09:06:41 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov> - * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk> - * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> - * - * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/inetdevice.h> -#include <linux/if_arp.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <net/arp.h> - -#include <net/irda/irda.h> -#include <net/irda/irmod.h> -#include <net/irda/irlan_common.h> -#include <net/irda/irlan_client.h> -#include <net/irda/irlan_event.h> -#include <net/irda/irlan_eth.h> - -static int irlan_eth_open(struct net_device *dev); -static int irlan_eth_close(struct net_device *dev); -static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb, - struct net_device *dev); -static void irlan_eth_set_multicast_list(struct net_device *dev); - -static const struct net_device_ops irlan_eth_netdev_ops = { - .ndo_open = irlan_eth_open, - .ndo_stop = irlan_eth_close, - .ndo_start_xmit = irlan_eth_xmit, - .ndo_set_rx_mode = irlan_eth_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, -}; - -/* - * Function irlan_eth_setup (dev) - * - * The network device initialization function. - * - */ -static void irlan_eth_setup(struct net_device *dev) -{ - ether_setup(dev); - - dev->netdev_ops = &irlan_eth_netdev_ops; - dev->needs_free_netdev = true; - dev->min_mtu = 0; - dev->max_mtu = ETH_MAX_MTU; - - /* - * Lets do all queueing in IrTTP instead of this device driver. - * Queueing here as well can introduce some strange latency - * problems, which we will avoid by setting the queue size to 0. - */ - /* - * The bugs in IrTTP and IrLAN that created this latency issue - * have now been fixed, and we can propagate flow control properly - * to the network layer. However, this requires a minimal queue of - * packets for the device. - * Without flow control, the Tx Queue is 14 (ttp) + 0 (dev) = 14 - * With flow control, the Tx Queue is 7 (ttp) + 4 (dev) = 11 - * See irlan_eth_flow_indication()... - * Note : this number was randomly selected and would need to - * be adjusted. - * Jean II */ - dev->tx_queue_len = 4; -} - -/* - * Function alloc_irlandev - * - * Allocate network device and control block - * - */ -struct net_device *alloc_irlandev(const char *name) -{ - return alloc_netdev(sizeof(struct irlan_cb), name, NET_NAME_UNKNOWN, - irlan_eth_setup); -} - -/* - * Function irlan_eth_open (dev) - * - * Network device has been opened by user - * - */ -static int irlan_eth_open(struct net_device *dev) -{ - struct irlan_cb *self = netdev_priv(dev); - - /* Ready to play! */ - netif_stop_queue(dev); /* Wait until data link is ready */ - - /* We are now open, so time to do some work */ - self->disconnect_reason = 0; - irlan_client_wakeup(self, self->saddr, self->daddr); - - /* Make sure we have a hardware address before we return, - so DHCP clients gets happy */ - return wait_event_interruptible(self->open_wait, - !self->tsap_data->connected); -} - -/* - * Function irlan_eth_close (dev) - * - * Stop the ether network device, his function will usually be called by - * ifconfig down. We should now disconnect the link, We start the - * close timer, so that the instance will be removed if we are unable - * to discover the remote device after the disconnect. - */ -static int irlan_eth_close(struct net_device *dev) -{ - struct irlan_cb *self = netdev_priv(dev); - - /* Stop device */ - netif_stop_queue(dev); - - irlan_close_data_channel(self); - irlan_close_tsaps(self); - - irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); - irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); - - /* Remove frames queued on the control channel */ - skb_queue_purge(&self->client.txq); - - self->client.tx_busy = 0; - - return 0; -} - -/* - * Function irlan_eth_tx (skb) - * - * Transmits ethernet frames over IrDA link. - * - */ -static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct irlan_cb *self = netdev_priv(dev); - int ret; - unsigned int len; - - /* skb headroom large enough to contain all IrDA-headers? */ - if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) { - struct sk_buff *new_skb = - skb_realloc_headroom(skb, self->max_header_size); - - /* We have to free the original skb anyway */ - dev_kfree_skb(skb); - - /* Did the realloc succeed? */ - if (new_skb == NULL) - return NETDEV_TX_OK; - - /* Use the new skb instead */ - skb = new_skb; - } - - netif_trans_update(dev); - - len = skb->len; - /* Now queue the packet in the transport layer */ - if (self->use_udata) - ret = irttp_udata_request(self->tsap_data, skb); - else - ret = irttp_data_request(self->tsap_data, skb); - - if (ret < 0) { - /* - * IrTTPs tx queue is full, so we just have to - * drop the frame! You might think that we should - * just return -1 and don't deallocate the frame, - * but that is dangerous since it's possible that - * we have replaced the original skb with a new - * one with larger headroom, and that would really - * confuse do_dev_queue_xmit() in dev.c! I have - * tried :-) DB - */ - /* irttp_data_request already free the packet */ - dev->stats.tx_dropped++; - } else { - dev->stats.tx_packets++; - dev->stats.tx_bytes += len; - } - - return NETDEV_TX_OK; -} - -/* - * Function irlan_eth_receive (handle, skb) - * - * This function gets the data that is received on the data channel - * - */ -int irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb) -{ - struct irlan_cb *self = instance; - struct net_device *dev = self->dev; - - if (skb == NULL) { - dev->stats.rx_dropped++; - return 0; - } - if (skb->len < ETH_HLEN) { - pr_debug("%s() : IrLAN frame too short (%d)\n", - __func__, skb->len); - dev->stats.rx_dropped++; - dev_kfree_skb(skb); - return 0; - } - - /* - * Adopt this frame! Important to set all these fields since they - * might have been previously set by the low level IrDA network - * device driver - */ - skb->protocol = eth_type_trans(skb, dev); /* Remove eth header */ - - dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; - - netif_rx(skb); /* Eat it! */ - - return 0; -} - -/* - * Function irlan_eth_flow (status) - * - * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by - * controlling the queue stop/start. - * - * The IrDA link layer has the advantage to have flow control, and - * IrTTP now properly handles that. Flow controlling the higher layers - * prevent us to drop Tx packets in here (up to 15% for a TCP socket, - * more for UDP socket). - * Also, this allow us to reduce the overall transmit queue, which means - * less latency in case of mixed traffic. - * Jean II - */ -void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) -{ - struct irlan_cb *self; - struct net_device *dev; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - dev = self->dev; - - IRDA_ASSERT(dev != NULL, return;); - - pr_debug("%s() : flow %s ; running %d\n", __func__, - flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START", - netif_running(dev)); - - switch (flow) { - case FLOW_STOP: - /* IrTTP is full, stop higher layers */ - netif_stop_queue(dev); - break; - case FLOW_START: - default: - /* Tell upper layers that its time to transmit frames again */ - /* Schedule network layer */ - netif_wake_queue(dev); - break; - } -} - -/* - * Function set_multicast_list (dev) - * - * Configure the filtering of the device - * - */ -#define HW_MAX_ADDRS 4 /* Must query to get it! */ -static void irlan_eth_set_multicast_list(struct net_device *dev) -{ - struct irlan_cb *self = netdev_priv(dev); - - /* Check if data channel has been connected yet */ - if (self->client.state != IRLAN_DATA) { - pr_debug("%s(), delaying!\n", __func__); - return; - } - - if (dev->flags & IFF_PROMISC) { - /* Enable promiscuous mode */ - net_warn_ratelimited("Promiscuous mode not implemented by IrLAN!\n"); - } else if ((dev->flags & IFF_ALLMULTI) || - netdev_mc_count(dev) > HW_MAX_ADDRS) { - /* Disable promiscuous mode, use normal mode. */ - pr_debug("%s(), Setting multicast filter\n", __func__); - /* hardware_set_filter(NULL); */ - - irlan_set_multicast_filter(self, TRUE); - } else if (!netdev_mc_empty(dev)) { - pr_debug("%s(), Setting multicast filter\n", __func__); - /* Walk the address list, and load the filter */ - /* hardware_set_filter(dev->mc_list); */ - - irlan_set_multicast_filter(self, TRUE); - } else { - pr_debug("%s(), Clearing multicast filter\n", __func__); - irlan_set_multicast_filter(self, FALSE); - } - - if (dev->flags & IFF_BROADCAST) - irlan_set_broadcast_filter(self, TRUE); - else - irlan_set_broadcast_filter(self, FALSE); -} diff --git a/net/irda/irlan/irlan_event.c b/net/irda/irlan/irlan_event.c deleted file mode 100644 index 9a1cc11c16f6..000000000000 --- a/net/irda/irlan/irlan_event.c +++ /dev/null @@ -1,60 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_event.c - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Tue Oct 20 09:10:16 1998 - * Modified at: Sat Oct 30 12:59:01 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <net/irda/irlan_event.h> - -const char * const irlan_state[] = { - "IRLAN_IDLE", - "IRLAN_QUERY", - "IRLAN_CONN", - "IRLAN_INFO", - "IRLAN_MEDIA", - "IRLAN_OPEN", - "IRLAN_WAIT", - "IRLAN_ARB", - "IRLAN_DATA", - "IRLAN_CLOSE", - "IRLAN_SYNC", -}; - -void irlan_next_client_state(struct irlan_cb *self, IRLAN_STATE state) -{ - pr_debug("%s(), %s\n", __func__ , irlan_state[state]); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - self->client.state = state; -} - -void irlan_next_provider_state(struct irlan_cb *self, IRLAN_STATE state) -{ - pr_debug("%s(), %s\n", __func__ , irlan_state[state]); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - self->provider.state = state; -} - diff --git a/net/irda/irlan/irlan_filter.c b/net/irda/irlan/irlan_filter.c deleted file mode 100644 index e755e90b2f26..000000000000 --- a/net/irda/irlan/irlan_filter.c +++ /dev/null @@ -1,240 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_filter.c - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Fri Jan 29 11:16:38 1999 - * Modified at: Sat Oct 30 12:58:45 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/skbuff.h> -#include <linux/random.h> -#include <linux/seq_file.h> - -#include <net/irda/irlan_common.h> -#include <net/irda/irlan_filter.h> - -/* - * Function irlan_filter_request (self, skb) - * - * Handle filter request from client peer device - * - */ -void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - if ((self->provider.filter_type == IRLAN_DIRECTED) && - (self->provider.filter_operation == DYNAMIC)) - { - pr_debug("Giving peer a dynamic Ethernet address\n"); - self->provider.mac_address[0] = 0x40; - self->provider.mac_address[1] = 0x00; - self->provider.mac_address[2] = 0x00; - self->provider.mac_address[3] = 0x00; - - /* Use arbitration value to generate MAC address */ - if (self->provider.access_type == ACCESS_PEER) { - self->provider.mac_address[4] = - self->provider.send_arb_val & 0xff; - self->provider.mac_address[5] = - (self->provider.send_arb_val >> 8) & 0xff; - } else { - /* Just generate something for now */ - get_random_bytes(self->provider.mac_address+4, 1); - get_random_bytes(self->provider.mac_address+5, 1); - } - - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x03; - irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); - irlan_insert_short_param(skb, "MAX_ENTRY", 0x0001); - irlan_insert_array_param(skb, "FILTER_ENTRY", - self->provider.mac_address, 6); - return; - } - - if ((self->provider.filter_type == IRLAN_DIRECTED) && - (self->provider.filter_mode == FILTER)) - { - pr_debug("Directed filter on\n"); - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x00; - return; - } - if ((self->provider.filter_type == IRLAN_DIRECTED) && - (self->provider.filter_mode == NONE)) - { - pr_debug("Directed filter off\n"); - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x00; - return; - } - - if ((self->provider.filter_type == IRLAN_BROADCAST) && - (self->provider.filter_mode == FILTER)) - { - pr_debug("Broadcast filter on\n"); - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x00; - return; - } - if ((self->provider.filter_type == IRLAN_BROADCAST) && - (self->provider.filter_mode == NONE)) - { - pr_debug("Broadcast filter off\n"); - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x00; - return; - } - if ((self->provider.filter_type == IRLAN_MULTICAST) && - (self->provider.filter_mode == FILTER)) - { - pr_debug("Multicast filter on\n"); - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x00; - return; - } - if ((self->provider.filter_type == IRLAN_MULTICAST) && - (self->provider.filter_mode == NONE)) - { - pr_debug("Multicast filter off\n"); - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x00; - return; - } - if ((self->provider.filter_type == IRLAN_MULTICAST) && - (self->provider.filter_operation == GET)) - { - pr_debug("Multicast filter get\n"); - skb->data[0] = 0x00; /* Success? */ - skb->data[1] = 0x02; - irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); - irlan_insert_short_param(skb, "MAX_ENTRY", 16); - return; - } - skb->data[0] = 0x00; /* Command not supported */ - skb->data[1] = 0x00; - - pr_debug("Not implemented!\n"); -} - -/* - * Function check_request_param (self, param, value) - * - * Check parameters in request from peer device - * - */ -void irlan_check_command_param(struct irlan_cb *self, char *param, char *value) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - pr_debug("%s, %s\n", param, value); - - /* - * This is experimental!! DB. - */ - if (strcmp(param, "MODE") == 0) { - self->use_udata = TRUE; - return; - } - - /* - * FILTER_TYPE - */ - if (strcmp(param, "FILTER_TYPE") == 0) { - if (strcmp(value, "DIRECTED") == 0) { - self->provider.filter_type = IRLAN_DIRECTED; - return; - } - if (strcmp(value, "MULTICAST") == 0) { - self->provider.filter_type = IRLAN_MULTICAST; - return; - } - if (strcmp(value, "BROADCAST") == 0) { - self->provider.filter_type = IRLAN_BROADCAST; - return; - } - } - /* - * FILTER_MODE - */ - if (strcmp(param, "FILTER_MODE") == 0) { - if (strcmp(value, "ALL") == 0) { - self->provider.filter_mode = ALL; - return; - } - if (strcmp(value, "FILTER") == 0) { - self->provider.filter_mode = FILTER; - return; - } - if (strcmp(value, "NONE") == 0) { - self->provider.filter_mode = FILTER; - return; - } - } - /* - * FILTER_OPERATION - */ - if (strcmp(param, "FILTER_OPERATION") == 0) { - if (strcmp(value, "DYNAMIC") == 0) { - self->provider.filter_operation = DYNAMIC; - return; - } - if (strcmp(value, "GET") == 0) { - self->provider.filter_operation = GET; - return; - } - } -} - -/* - * Function irlan_print_filter (filter_type, buf) - * - * Print status of filter. Used by /proc file system - * - */ -#ifdef CONFIG_PROC_FS -#define MASK2STR(m,s) { .mask = m, .str = s } - -void irlan_print_filter(struct seq_file *seq, int filter_type) -{ - static struct { - int mask; - const char *str; - } filter_mask2str[] = { - MASK2STR(IRLAN_DIRECTED, "DIRECTED"), - MASK2STR(IRLAN_FUNCTIONAL, "FUNCTIONAL"), - MASK2STR(IRLAN_GROUP, "GROUP"), - MASK2STR(IRLAN_MAC_FRAME, "MAC_FRAME"), - MASK2STR(IRLAN_MULTICAST, "MULTICAST"), - MASK2STR(IRLAN_BROADCAST, "BROADCAST"), - MASK2STR(IRLAN_IPX_SOCKET, "IPX_SOCKET"), - MASK2STR(0, NULL) - }, *p; - - for (p = filter_mask2str; p->str; p++) { - if (filter_type & p->mask) - seq_printf(seq, "%s ", p->str); - } - seq_putc(seq, '\n'); -} -#undef MASK2STR -#endif diff --git a/net/irda/irlan/irlan_provider.c b/net/irda/irlan/irlan_provider.c deleted file mode 100644 index 15c292cf2644..000000000000 --- a/net/irda/irlan/irlan_provider.c +++ /dev/null @@ -1,408 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_provider.c - * Version: 0.9 - * Description: IrDA LAN Access Protocol Implementation - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 31 20:14:37 1997 - * Modified at: Sat Oct 30 12:52:10 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov> - * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk> - * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/random.h> -#include <linux/bitops.h> -#include <linux/slab.h> - -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/irttp.h> -#include <net/irda/irlmp.h> -#include <net/irda/irias_object.h> -#include <net/irda/iriap.h> -#include <net/irda/timer.h> - -#include <net/irda/irlan_common.h> -#include <net/irda/irlan_eth.h> -#include <net/irda/irlan_event.h> -#include <net/irda/irlan_provider.h> -#include <net/irda/irlan_filter.h> -#include <net/irda/irlan_client.h> - -static void irlan_provider_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb); - -/* - * Function irlan_provider_control_data_indication (handle, skb) - * - * This function gets the data that is received on the control channel - * - */ -static int irlan_provider_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct irlan_cb *self; - __u8 code; - - self = instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - IRDA_ASSERT(skb != NULL, return -1;); - - code = skb->data[0]; - switch(code) { - case CMD_GET_PROVIDER_INFO: - pr_debug("Got GET_PROVIDER_INFO command!\n"); - irlan_do_provider_event(self, IRLAN_GET_INFO_CMD, skb); - break; - - case CMD_GET_MEDIA_CHAR: - pr_debug("Got GET_MEDIA_CHAR command!\n"); - irlan_do_provider_event(self, IRLAN_GET_MEDIA_CMD, skb); - break; - case CMD_OPEN_DATA_CHANNEL: - pr_debug("Got OPEN_DATA_CHANNEL command!\n"); - irlan_do_provider_event(self, IRLAN_OPEN_DATA_CMD, skb); - break; - case CMD_FILTER_OPERATION: - pr_debug("Got FILTER_OPERATION command!\n"); - irlan_do_provider_event(self, IRLAN_FILTER_CONFIG_CMD, skb); - break; - case CMD_RECONNECT_DATA_CHAN: - pr_debug("%s(), Got RECONNECT_DATA_CHAN command\n", __func__); - pr_debug("%s(), NOT IMPLEMENTED\n", __func__); - break; - case CMD_CLOSE_DATA_CHAN: - pr_debug("Got CLOSE_DATA_CHAN command!\n"); - pr_debug("%s(), NOT IMPLEMENTED\n", __func__); - break; - default: - pr_debug("%s(), Unknown command!\n", __func__); - break; - } - return 0; -} - -/* - * Function irlan_provider_connect_indication (handle, skb, priv) - * - * Got connection from peer IrLAN client - * - */ -static void irlan_provider_connect_indication(void *instance, void *sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - struct irlan_cb *self; - struct tsap_cb *tsap; - - self = instance; - tsap = sap; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - IRDA_ASSERT(tsap == self->provider.tsap_ctrl,return;); - IRDA_ASSERT(self->provider.state == IRLAN_IDLE, return;); - - self->provider.max_sdu_size = max_sdu_size; - self->provider.max_header_size = max_header_size; - - irlan_do_provider_event(self, IRLAN_CONNECT_INDICATION, NULL); - - /* - * If we are in peer mode, the client may not have got the discovery - * indication it needs to make progress. If the client is still in - * IDLE state, we must kick it. - */ - if ((self->provider.access_type == ACCESS_PEER) && - (self->client.state == IRLAN_IDLE)) - { - irlan_client_wakeup(self, self->saddr, self->daddr); - } -} - -/* - * Function irlan_provider_connect_response (handle) - * - * Accept incoming connection - * - */ -void irlan_provider_connect_response(struct irlan_cb *self, - struct tsap_cb *tsap) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - /* Just accept */ - irttp_connect_response(tsap, IRLAN_MTU, NULL); -} - -static void irlan_provider_disconnect_indication(void *instance, void *sap, - LM_REASON reason, - struct sk_buff *userdata) -{ - struct irlan_cb *self; - struct tsap_cb *tsap; - - pr_debug("%s(), reason=%d\n", __func__ , reason); - - self = instance; - tsap = sap; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - IRDA_ASSERT(tsap != NULL, return;); - IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); - - IRDA_ASSERT(tsap == self->provider.tsap_ctrl, return;); - - irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); -} - -/* - * Function irlan_parse_open_data_cmd (self, skb) - * - * - * - */ -int irlan_parse_open_data_cmd(struct irlan_cb *self, struct sk_buff *skb) -{ - int ret; - - ret = irlan_provider_parse_command(self, CMD_OPEN_DATA_CHANNEL, skb); - - /* Open data channel */ - irlan_open_data_tsap(self); - - return ret; -} - -/* - * Function parse_command (skb) - * - * Extract all parameters from received buffer, then feed them to - * check_params for parsing - * - */ -int irlan_provider_parse_command(struct irlan_cb *self, int cmd, - struct sk_buff *skb) -{ - __u8 *frame; - __u8 *ptr; - int count; - __u16 val_len; - int i; - char *name; - char *value; - int ret = RSP_SUCCESS; - - IRDA_ASSERT(skb != NULL, return -RSP_PROTOCOL_ERROR;); - - pr_debug("%s(), skb->len=%d\n", __func__ , (int)skb->len); - - IRDA_ASSERT(self != NULL, return -RSP_PROTOCOL_ERROR;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -RSP_PROTOCOL_ERROR;); - - if (!skb) - return -RSP_PROTOCOL_ERROR; - - frame = skb->data; - - name = kmalloc(255, GFP_ATOMIC); - if (!name) - return -RSP_INSUFFICIENT_RESOURCES; - value = kmalloc(1016, GFP_ATOMIC); - if (!value) { - kfree(name); - return -RSP_INSUFFICIENT_RESOURCES; - } - - /* How many parameters? */ - count = frame[1]; - - pr_debug("Got %d parameters\n", count); - - ptr = frame+2; - - /* For all parameters */ - for (i=0; i<count;i++) { - ret = irlan_extract_param(ptr, name, value, &val_len); - if (ret < 0) { - pr_debug("%s(), IrLAN, Error!\n", __func__); - break; - } - ptr+=ret; - ret = RSP_SUCCESS; - irlan_check_command_param(self, name, value); - } - /* Cleanup */ - kfree(name); - kfree(value); - - return ret; -} - -/* - * Function irlan_provider_send_reply (self, info) - * - * Send reply to query to peer IrLAN layer - * - */ -void irlan_provider_send_reply(struct irlan_cb *self, int command, - int ret_code) -{ - struct sk_buff *skb; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); - - skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + - /* Bigger param length comes from CMD_GET_MEDIA_CHAR */ - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") + - IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") + - IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "HOSTED"), - GFP_ATOMIC); - - if (!skb) - return; - - /* Reserve space for TTP, LMP, and LAP header */ - skb_reserve(skb, self->provider.max_header_size); - skb_put(skb, 2); - - switch (command) { - case CMD_GET_PROVIDER_INFO: - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x02; /* 2 parameters */ - switch (self->media) { - case MEDIA_802_3: - irlan_insert_string_param(skb, "MEDIA", "802.3"); - break; - case MEDIA_802_5: - irlan_insert_string_param(skb, "MEDIA", "802.5"); - break; - default: - pr_debug("%s(), unknown media type!\n", __func__); - break; - } - irlan_insert_short_param(skb, "IRLAN_VER", 0x0101); - break; - - case CMD_GET_MEDIA_CHAR: - skb->data[0] = 0x00; /* Success */ - skb->data[1] = 0x05; /* 5 parameters */ - irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); - irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST"); - irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST"); - - switch (self->provider.access_type) { - case ACCESS_DIRECT: - irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT"); - break; - case ACCESS_PEER: - irlan_insert_string_param(skb, "ACCESS_TYPE", "PEER"); - break; - case ACCESS_HOSTED: - irlan_insert_string_param(skb, "ACCESS_TYPE", "HOSTED"); - break; - default: - pr_debug("%s(), Unknown access type\n", __func__); - break; - } - irlan_insert_short_param(skb, "MAX_FRAME", 0x05ee); - break; - case CMD_OPEN_DATA_CHANNEL: - skb->data[0] = 0x00; /* Success */ - if (self->provider.send_arb_val) { - skb->data[1] = 0x03; /* 3 parameters */ - irlan_insert_short_param(skb, "CON_ARB", - self->provider.send_arb_val); - } else - skb->data[1] = 0x02; /* 2 parameters */ - irlan_insert_byte_param(skb, "DATA_CHAN", self->stsap_sel_data); - irlan_insert_string_param(skb, "RECONNECT_KEY", "LINUX RULES!"); - break; - case CMD_FILTER_OPERATION: - irlan_filter_request(self, skb); - break; - default: - pr_debug("%s(), Unknown command!\n", __func__); - break; - } - - irttp_data_request(self->provider.tsap_ctrl, skb); -} - -/* - * Function irlan_provider_register(void) - * - * Register provider support so we can accept incoming connections. - * - */ -int irlan_provider_open_ctrl_tsap(struct irlan_cb *self) -{ - struct tsap_cb *tsap; - notify_t notify; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - /* Check if already open */ - if (self->provider.tsap_ctrl) - return -1; - - /* - * First register well known control TSAP - */ - irda_notify_init(¬ify); - notify.data_indication = irlan_provider_data_indication; - notify.connect_indication = irlan_provider_connect_indication; - notify.disconnect_indication = irlan_provider_disconnect_indication; - notify.instance = self; - strlcpy(notify.name, "IrLAN ctrl (p)", sizeof(notify.name)); - - tsap = irttp_open_tsap(LSAP_ANY, 1, ¬ify); - if (!tsap) { - pr_debug("%s(), Got no tsap!\n", __func__); - return -1; - } - self->provider.tsap_ctrl = tsap; - - /* Register with LM-IAS */ - irlan_ias_register(self, tsap->stsap_sel); - - return 0; -} - diff --git a/net/irda/irlan/irlan_provider_event.c b/net/irda/irlan/irlan_provider_event.c deleted file mode 100644 index 9c4f7f51d6b5..000000000000 --- a/net/irda/irlan/irlan_provider_event.c +++ /dev/null @@ -1,233 +0,0 @@ -/********************************************************************* - * - * Filename: irlan_provider_event.c - * Version: 0.9 - * Description: IrLAN provider state machine) - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 31 20:14:37 1997 - * Modified at: Sat Oct 30 12:52:41 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <net/irda/irda.h> -#include <net/irda/iriap.h> -#include <net/irda/irlmp.h> -#include <net/irda/irttp.h> - -#include <net/irda/irlan_provider.h> -#include <net/irda/irlan_event.h> - -static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); -static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb); - -static int (*state[])(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) = -{ - irlan_provider_state_idle, - NULL, /* Query */ - NULL, /* Info */ - irlan_provider_state_info, - NULL, /* Media */ - irlan_provider_state_open, - NULL, /* Wait */ - NULL, /* Arb */ - irlan_provider_state_data, - NULL, /* Close */ - NULL, /* Sync */ -}; - -void irlan_do_provider_event(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(*state[ self->provider.state] != NULL, return;); - - (*state[self->provider.state]) (self, event, skb); -} - -/* - * Function irlan_provider_state_idle (event, skb, info) - * - * IDLE, We are waiting for an indication that there is a provider - * available. - */ -static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_CONNECT_INDICATION: - irlan_provider_connect_response( self, self->provider.tsap_ctrl); - irlan_next_provider_state( self, IRLAN_INFO); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_provider_state_info (self, event, skb, info) - * - * INFO, We have issued a GetInfo command and is awaiting a reply. - */ -static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_GET_INFO_CMD: - /* Be sure to use 802.3 in case of peer mode */ - if (self->provider.access_type == ACCESS_PEER) { - self->media = MEDIA_802_3; - - /* Check if client has started yet */ - if (self->client.state == IRLAN_IDLE) { - /* This should get the client going */ - irlmp_discovery_request(8); - } - } - - irlan_provider_send_reply(self, CMD_GET_PROVIDER_INFO, - RSP_SUCCESS); - /* Keep state */ - break; - case IRLAN_GET_MEDIA_CMD: - irlan_provider_send_reply(self, CMD_GET_MEDIA_CHAR, - RSP_SUCCESS); - /* Keep state */ - break; - case IRLAN_OPEN_DATA_CMD: - ret = irlan_parse_open_data_cmd(self, skb); - if (self->provider.access_type == ACCESS_PEER) { - /* FIXME: make use of random functions! */ - self->provider.send_arb_val = (jiffies & 0xffff); - } - irlan_provider_send_reply(self, CMD_OPEN_DATA_CHANNEL, ret); - - if (ret == RSP_SUCCESS) { - irlan_next_provider_state(self, IRLAN_OPEN); - - /* Signal client that we are now open */ - irlan_do_client_event(self, IRLAN_PROVIDER_SIGNAL, NULL); - } - break; - case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ - case IRLAN_LAP_DISCONNECT: - irlan_next_provider_state(self, IRLAN_IDLE); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_provider_state_open (self, event, skb, info) - * - * OPEN, The client has issued a OpenData command and is awaiting a - * reply - * - */ -static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - - switch(event) { - case IRLAN_FILTER_CONFIG_CMD: - irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb); - irlan_provider_send_reply(self, CMD_FILTER_OPERATION, - RSP_SUCCESS); - /* Keep state */ - break; - case IRLAN_DATA_CONNECT_INDICATION: - irlan_next_provider_state(self, IRLAN_DATA); - irlan_provider_connect_response(self, self->tsap_data); - break; - case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ - case IRLAN_LAP_DISCONNECT: - irlan_next_provider_state(self, IRLAN_IDLE); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irlan_provider_state_data (self, event, skb, info) - * - * DATA, The data channel is connected, allowing data transfers between - * the local and remote machines. - * - */ -static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); - - switch(event) { - case IRLAN_FILTER_CONFIG_CMD: - irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb); - irlan_provider_send_reply(self, CMD_FILTER_OPERATION, - RSP_SUCCESS); - break; - case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ - case IRLAN_LAP_DISCONNECT: - irlan_next_provider_state(self, IRLAN_IDLE); - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__ , event); - break; - } - if (skb) - dev_kfree_skb(skb); - - return 0; -} - - - - - - - - - - diff --git a/net/irda/irlap.c b/net/irda/irlap.c deleted file mode 100644 index 1cde711bcab5..000000000000 --- a/net/irda/irlap.c +++ /dev/null @@ -1,1207 +0,0 @@ -/********************************************************************* - * - * Filename: irlap.c - * Version: 1.0 - * Description: IrLAP implementation for Linux - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Mon Aug 4 20:40:53 1997 - * Modified at: Tue Dec 14 09:26:44 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/init.h> -#include <linux/random.h> -#include <linux/module.h> -#include <linux/seq_file.h> - -#include <net/irda/irda.h> -#include <net/irda/irda_device.h> -#include <net/irda/irqueue.h> -#include <net/irda/irlmp.h> -#include <net/irda/irlmp_frame.h> -#include <net/irda/irlap_frame.h> -#include <net/irda/irlap.h> -#include <net/irda/timer.h> -#include <net/irda/qos.h> - -static hashbin_t *irlap = NULL; -int sysctl_slot_timeout = SLOT_TIMEOUT * 1000 / HZ; - -/* This is the delay of missed pf period before generating an event - * to the application. The spec mandate 3 seconds, but in some cases - * it's way too long. - Jean II */ -int sysctl_warn_noreply_time = 3; - -extern void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb); -static void __irlap_close(struct irlap_cb *self); -static void irlap_init_qos_capabilities(struct irlap_cb *self, - struct qos_info *qos_user); - -static const char *const lap_reasons[] __maybe_unused = { - "ERROR, NOT USED", - "LAP_DISC_INDICATION", - "LAP_NO_RESPONSE", - "LAP_RESET_INDICATION", - "LAP_FOUND_NONE", - "LAP_MEDIA_BUSY", - "LAP_PRIMARY_CONFLICT", - "ERROR, NOT USED", -}; - -int __init irlap_init(void) -{ - /* Check if the compiler did its job properly. - * May happen on some ARM configuration, check with Russell King. */ - IRDA_ASSERT(sizeof(struct xid_frame) == 14, ;); - IRDA_ASSERT(sizeof(struct test_frame) == 10, ;); - IRDA_ASSERT(sizeof(struct ua_frame) == 10, ;); - IRDA_ASSERT(sizeof(struct snrm_frame) == 11, ;); - - /* Allocate master array */ - irlap = hashbin_new(HB_LOCK); - if (irlap == NULL) { - net_err_ratelimited("%s: can't allocate irlap hashbin!\n", - __func__); - return -ENOMEM; - } - - return 0; -} - -void irlap_cleanup(void) -{ - IRDA_ASSERT(irlap != NULL, return;); - - hashbin_delete(irlap, (FREE_FUNC) __irlap_close); -} - -/* - * Function irlap_open (driver) - * - * Initialize IrLAP layer - * - */ -struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos, - const char *hw_name) -{ - struct irlap_cb *self; - - /* Initialize the irlap structure. */ - self = kzalloc(sizeof(struct irlap_cb), GFP_KERNEL); - if (self == NULL) - return NULL; - - self->magic = LAP_MAGIC; - - /* Make a binding between the layers */ - self->netdev = dev; - self->qos_dev = qos; - /* Copy hardware name */ - if(hw_name != NULL) { - strlcpy(self->hw_name, hw_name, sizeof(self->hw_name)); - } else { - self->hw_name[0] = '\0'; - } - - /* FIXME: should we get our own field? */ - dev->atalk_ptr = self; - - self->state = LAP_OFFLINE; - - /* Initialize transmit queue */ - skb_queue_head_init(&self->txq); - skb_queue_head_init(&self->txq_ultra); - skb_queue_head_init(&self->wx_list); - - /* My unique IrLAP device address! */ - /* We don't want the broadcast address, neither the NULL address - * (most often used to signify "invalid"), and we don't want an - * address already in use (otherwise connect won't be able - * to select the proper link). - Jean II */ - do { - get_random_bytes(&self->saddr, sizeof(self->saddr)); - } while ((self->saddr == 0x0) || (self->saddr == BROADCAST) || - (hashbin_lock_find(irlap, self->saddr, NULL)) ); - /* Copy to the driver */ - memcpy(dev->dev_addr, &self->saddr, 4); - - init_timer(&self->slot_timer); - init_timer(&self->query_timer); - init_timer(&self->discovery_timer); - init_timer(&self->final_timer); - init_timer(&self->poll_timer); - init_timer(&self->wd_timer); - init_timer(&self->backoff_timer); - init_timer(&self->media_busy_timer); - - irlap_apply_default_connection_parameters(self); - - self->N3 = 3; /* # connections attempts to try before giving up */ - - self->state = LAP_NDM; - - hashbin_insert(irlap, (irda_queue_t *) self, self->saddr, NULL); - - irlmp_register_link(self, self->saddr, &self->notify); - - return self; -} -EXPORT_SYMBOL(irlap_open); - -/* - * Function __irlap_close (self) - * - * Remove IrLAP and all allocated memory. Stop any pending timers. - * - */ -static void __irlap_close(struct irlap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Stop timers */ - del_timer(&self->slot_timer); - del_timer(&self->query_timer); - del_timer(&self->discovery_timer); - del_timer(&self->final_timer); - del_timer(&self->poll_timer); - del_timer(&self->wd_timer); - del_timer(&self->backoff_timer); - del_timer(&self->media_busy_timer); - - irlap_flush_all_queues(self); - - self->magic = 0; - - kfree(self); -} - -/* - * Function irlap_close (self) - * - * Remove IrLAP instance - * - */ -void irlap_close(struct irlap_cb *self) -{ - struct irlap_cb *lap; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* We used to send a LAP_DISC_INDICATION here, but this was - * racy. This has been move within irlmp_unregister_link() - * itself. Jean II */ - - /* Kill the LAP and all LSAPs on top of it */ - irlmp_unregister_link(self->saddr); - self->notify.instance = NULL; - - /* Be sure that we manage to remove ourself from the hash */ - lap = hashbin_remove(irlap, self->saddr, NULL); - if (!lap) { - pr_debug("%s(), Didn't find myself!\n", __func__); - return; - } - __irlap_close(lap); -} -EXPORT_SYMBOL(irlap_close); - -/* - * Function irlap_connect_indication (self, skb) - * - * Another device is attempting to make a connection - * - */ -void irlap_connect_indication(struct irlap_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_init_qos_capabilities(self, NULL); /* No user QoS! */ - - irlmp_link_connect_indication(self->notify.instance, self->saddr, - self->daddr, &self->qos_tx, skb); -} - -/* - * Function irlap_connect_response (self, skb) - * - * Service user has accepted incoming connection - * - */ -void irlap_connect_response(struct irlap_cb *self, struct sk_buff *userdata) -{ - irlap_do_event(self, CONNECT_RESPONSE, userdata, NULL); -} - -/* - * Function irlap_connect_request (self, daddr, qos_user, sniff) - * - * Request connection with another device, sniffing is not implemented - * yet. - * - */ -void irlap_connect_request(struct irlap_cb *self, __u32 daddr, - struct qos_info *qos_user, int sniff) -{ - pr_debug("%s(), daddr=0x%08x\n", __func__, daddr); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - self->daddr = daddr; - - /* - * If the service user specifies QoS values for this connection, - * then use them - */ - irlap_init_qos_capabilities(self, qos_user); - - if ((self->state == LAP_NDM) && !self->media_busy) - irlap_do_event(self, CONNECT_REQUEST, NULL, NULL); - else - self->connect_pending = TRUE; -} - -/* - * Function irlap_connect_confirm (self, skb) - * - * Connection request has been accepted - * - */ -void irlap_connect_confirm(struct irlap_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlmp_link_connect_confirm(self->notify.instance, &self->qos_tx, skb); -} - -/* - * Function irlap_data_indication (self, skb) - * - * Received data frames from IR-port, so we just pass them up to - * IrLMP for further processing - * - */ -void irlap_data_indication(struct irlap_cb *self, struct sk_buff *skb, - int unreliable) -{ - /* Hide LAP header from IrLMP layer */ - skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); - - irlmp_link_data_indication(self->notify.instance, skb, unreliable); -} - - -/* - * Function irlap_data_request (self, skb) - * - * Queue data for transmission, must wait until XMIT state - * - */ -void irlap_data_request(struct irlap_cb *self, struct sk_buff *skb, - int unreliable) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER), - return;); - skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); - - /* - * Must set frame format now so that the rest of the code knows - * if its dealing with an I or an UI frame - */ - if (unreliable) - skb->data[1] = UI_FRAME; - else - skb->data[1] = I_FRAME; - - /* Don't forget to refcount it - see irlmp_connect_request(). */ - skb_get(skb); - - /* Add at the end of the queue (keep ordering) - Jean II */ - skb_queue_tail(&self->txq, skb); - - /* - * Send event if this frame only if we are in the right state - * FIXME: udata should be sent first! (skb_queue_head?) - */ - if ((self->state == LAP_XMIT_P) || (self->state == LAP_XMIT_S)) { - /* If we are not already processing the Tx queue, trigger - * transmission immediately - Jean II */ - if((skb_queue_len(&self->txq) <= 1) && (!self->local_busy)) - irlap_do_event(self, DATA_REQUEST, skb, NULL); - /* Otherwise, the packets will be sent normally at the - * next pf-poll - Jean II */ - } -} - -/* - * Function irlap_unitdata_request (self, skb) - * - * Send Ultra data. This is data that must be sent outside any connection - * - */ -#ifdef CONFIG_IRDA_ULTRA -void irlap_unitdata_request(struct irlap_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER), - return;); - skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); - - skb->data[0] = CBROADCAST; - skb->data[1] = UI_FRAME; - - /* Don't need to refcount, see irlmp_connless_data_request() */ - - skb_queue_tail(&self->txq_ultra, skb); - - irlap_do_event(self, SEND_UI_FRAME, NULL, NULL); -} -#endif /*CONFIG_IRDA_ULTRA */ - -/* - * Function irlap_udata_indication (self, skb) - * - * Receive Ultra data. This is data that is received outside any connection - * - */ -#ifdef CONFIG_IRDA_ULTRA -void irlap_unitdata_indication(struct irlap_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* Hide LAP header from IrLMP layer */ - skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); - - irlmp_link_unitdata_indication(self->notify.instance, skb); -} -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Function irlap_disconnect_request (void) - * - * Request to disconnect connection by service user - */ -void irlap_disconnect_request(struct irlap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Don't disconnect until all data frames are successfully sent */ - if (!skb_queue_empty(&self->txq)) { - self->disconnect_pending = TRUE; - return; - } - - /* Check if we are in the right state for disconnecting */ - switch (self->state) { - case LAP_XMIT_P: /* FALLTHROUGH */ - case LAP_XMIT_S: /* FALLTHROUGH */ - case LAP_CONN: /* FALLTHROUGH */ - case LAP_RESET_WAIT: /* FALLTHROUGH */ - case LAP_RESET_CHECK: - irlap_do_event(self, DISCONNECT_REQUEST, NULL, NULL); - break; - default: - pr_debug("%s(), disconnect pending!\n", __func__); - self->disconnect_pending = TRUE; - break; - } -} - -/* - * Function irlap_disconnect_indication (void) - * - * Disconnect request from other device - * - */ -void irlap_disconnect_indication(struct irlap_cb *self, LAP_REASON reason) -{ - pr_debug("%s(), reason=%s\n", __func__, lap_reasons[reason]); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Flush queues */ - irlap_flush_all_queues(self); - - switch (reason) { - case LAP_RESET_INDICATION: - pr_debug("%s(), Sending reset request!\n", __func__); - irlap_do_event(self, RESET_REQUEST, NULL, NULL); - break; - case LAP_NO_RESPONSE: /* FALLTHROUGH */ - case LAP_DISC_INDICATION: /* FALLTHROUGH */ - case LAP_FOUND_NONE: /* FALLTHROUGH */ - case LAP_MEDIA_BUSY: - irlmp_link_disconnect_indication(self->notify.instance, self, - reason, NULL); - break; - default: - net_err_ratelimited("%s: Unknown reason %d\n", - __func__, reason); - } -} - -/* - * Function irlap_discovery_request (gen_addr_bit) - * - * Start one single discovery operation. - * - */ -void irlap_discovery_request(struct irlap_cb *self, discovery_t *discovery) -{ - struct irlap_info info; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(discovery != NULL, return;); - - pr_debug("%s(), nslots = %d\n", __func__, discovery->nslots); - - IRDA_ASSERT((discovery->nslots == 1) || (discovery->nslots == 6) || - (discovery->nslots == 8) || (discovery->nslots == 16), - return;); - - /* Discovery is only possible in NDM mode */ - if (self->state != LAP_NDM) { - pr_debug("%s(), discovery only possible in NDM mode\n", - __func__); - irlap_discovery_confirm(self, NULL); - /* Note : in theory, if we are not in NDM, we could postpone - * the discovery like we do for connection request. - * In practice, it's not worth it. If the media was busy, - * it's likely next time around it won't be busy. If we are - * in REPLY state, we will get passive discovery info & event. - * Jean II */ - return; - } - - /* Check if last discovery request finished in time, or if - * it was aborted due to the media busy flag. */ - if (self->discovery_log != NULL) { - hashbin_delete(self->discovery_log, (FREE_FUNC) kfree); - self->discovery_log = NULL; - } - - /* All operations will occur at predictable time, no need to lock */ - self->discovery_log = hashbin_new(HB_NOLOCK); - - if (self->discovery_log == NULL) { - net_warn_ratelimited("%s(), Unable to allocate discovery log!\n", - __func__); - return; - } - - info.S = discovery->nslots; /* Number of slots */ - info.s = 0; /* Current slot */ - - self->discovery_cmd = discovery; - info.discovery = discovery; - - /* sysctl_slot_timeout bounds are checked in irsysctl.c - Jean II */ - self->slot_timeout = msecs_to_jiffies(sysctl_slot_timeout); - - irlap_do_event(self, DISCOVERY_REQUEST, NULL, &info); -} - -/* - * Function irlap_discovery_confirm (log) - * - * A device has been discovered in front of this station, we - * report directly to LMP. - */ -void irlap_discovery_confirm(struct irlap_cb *self, hashbin_t *discovery_log) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - IRDA_ASSERT(self->notify.instance != NULL, return;); - - /* - * Check for successful discovery, since we are then allowed to clear - * the media busy condition (IrLAP 6.13.4 - p.94). This should allow - * us to make connection attempts much faster and easier (i.e. no - * collisions). - * Setting media busy to false will also generate an event allowing - * to process pending events in NDM state machine. - * Note : the spec doesn't define what's a successful discovery is. - * If we want Ultra to work, it's successful even if there is - * nobody discovered - Jean II - */ - if (discovery_log) - irda_device_set_media_busy(self->netdev, FALSE); - - /* Inform IrLMP */ - irlmp_link_discovery_confirm(self->notify.instance, discovery_log); -} - -/* - * Function irlap_discovery_indication (log) - * - * Somebody is trying to discover us! - * - */ -void irlap_discovery_indication(struct irlap_cb *self, discovery_t *discovery) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(discovery != NULL, return;); - - IRDA_ASSERT(self->notify.instance != NULL, return;); - - /* A device is very likely to connect immediately after it performs - * a successful discovery. This means that in our case, we are much - * more likely to receive a connection request over the medium. - * So, we backoff to avoid collisions. - * IrLAP spec 6.13.4 suggest 100ms... - * Note : this little trick actually make a *BIG* difference. If I set - * my Linux box with discovery enabled and one Ultra frame sent every - * second, my Palm has no trouble connecting to it every time ! - * Jean II */ - irda_device_set_media_busy(self->netdev, SMALL); - - irlmp_link_discovery_indication(self->notify.instance, discovery); -} - -/* - * Function irlap_status_indication (quality_of_link) - */ -void irlap_status_indication(struct irlap_cb *self, int quality_of_link) -{ - switch (quality_of_link) { - case STATUS_NO_ACTIVITY: - net_info_ratelimited("IrLAP, no activity on link!\n"); - break; - case STATUS_NOISY: - net_info_ratelimited("IrLAP, noisy link!\n"); - break; - default: - break; - } - irlmp_status_indication(self->notify.instance, - quality_of_link, LOCK_NO_CHANGE); -} - -/* - * Function irlap_reset_indication (void) - */ -void irlap_reset_indication(struct irlap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - if (self->state == LAP_RESET_WAIT) - irlap_do_event(self, RESET_REQUEST, NULL, NULL); - else - irlap_do_event(self, RESET_RESPONSE, NULL, NULL); -} - -/* - * Function irlap_reset_confirm (void) - */ -void irlap_reset_confirm(void) -{ -} - -/* - * Function irlap_generate_rand_time_slot (S, s) - * - * Generate a random time slot between s and S-1 where - * S = Number of slots (0 -> S-1) - * s = Current slot - */ -int irlap_generate_rand_time_slot(int S, int s) -{ - static int rand; - int slot; - - IRDA_ASSERT((S - s) > 0, return 0;); - - rand += jiffies; - rand ^= (rand << 12); - rand ^= (rand >> 20); - - slot = s + rand % (S-s); - - IRDA_ASSERT((slot >= s) || (slot < S), return 0;); - - return slot; -} - -/* - * Function irlap_update_nr_received (nr) - * - * Remove all acknowledged frames in current window queue. This code is - * not intuitive and you should not try to change it. If you think it - * contains bugs, please mail a patch to the author instead. - */ -void irlap_update_nr_received(struct irlap_cb *self, int nr) -{ - struct sk_buff *skb = NULL; - int count = 0; - - /* - * Remove all the ack-ed frames from the window queue. - */ - - /* - * Optimize for the common case. It is most likely that the receiver - * will acknowledge all the frames we have sent! So in that case we - * delete all frames stored in window. - */ - if (nr == self->vs) { - while ((skb = skb_dequeue(&self->wx_list)) != NULL) { - dev_kfree_skb(skb); - } - /* The last acked frame is the next to send minus one */ - self->va = nr - 1; - } else { - /* Remove all acknowledged frames in current window */ - while ((skb_peek(&self->wx_list) != NULL) && - (((self->va+1) % 8) != nr)) - { - skb = skb_dequeue(&self->wx_list); - dev_kfree_skb(skb); - - self->va = (self->va + 1) % 8; - count++; - } - } - - /* Advance window */ - self->window = self->window_size - skb_queue_len(&self->wx_list); -} - -/* - * Function irlap_validate_ns_received (ns) - * - * Validate the next to send (ns) field from received frame. - */ -int irlap_validate_ns_received(struct irlap_cb *self, int ns) -{ - /* ns as expected? */ - if (ns == self->vr) - return NS_EXPECTED; - /* - * Stations are allowed to treat invalid NS as unexpected NS - * IrLAP, Recv ... with-invalid-Ns. p. 84 - */ - return NS_UNEXPECTED; - - /* return NR_INVALID; */ -} -/* - * Function irlap_validate_nr_received (nr) - * - * Validate the next to receive (nr) field from received frame. - * - */ -int irlap_validate_nr_received(struct irlap_cb *self, int nr) -{ - /* nr as expected? */ - if (nr == self->vs) { - pr_debug("%s(), expected!\n", __func__); - return NR_EXPECTED; - } - - /* - * unexpected nr? (but within current window), first we check if the - * ns numbers of the frames in the current window wrap. - */ - if (self->va < self->vs) { - if ((nr >= self->va) && (nr <= self->vs)) - return NR_UNEXPECTED; - } else { - if ((nr >= self->va) || (nr <= self->vs)) - return NR_UNEXPECTED; - } - - /* Invalid nr! */ - return NR_INVALID; -} - -/* - * Function irlap_initiate_connection_state () - * - * Initialize the connection state parameters - * - */ -void irlap_initiate_connection_state(struct irlap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Next to send and next to receive */ - self->vs = self->vr = 0; - - /* Last frame which got acked (0 - 1) % 8 */ - self->va = 7; - - self->window = 1; - - self->remote_busy = FALSE; - self->retry_count = 0; -} - -/* - * Function irlap_wait_min_turn_around (self, qos) - * - * Wait negotiated minimum turn around time, this function actually sets - * the number of BOS's that must be sent before the next transmitted - * frame in order to delay for the specified amount of time. This is - * done to avoid using timers, and the forbidden udelay! - */ -void irlap_wait_min_turn_around(struct irlap_cb *self, struct qos_info *qos) -{ - __u32 min_turn_time; - __u32 speed; - - /* Get QoS values. */ - speed = qos->baud_rate.value; - min_turn_time = qos->min_turn_time.value; - - /* No need to calculate XBOFs for speeds over 115200 bps */ - if (speed > 115200) { - self->mtt_required = min_turn_time; - return; - } - - /* - * Send additional BOF's for the next frame for the requested - * min turn time, so now we must calculate how many chars (XBOF's) we - * must send for the requested time period (min turn time) - */ - self->xbofs_delay = irlap_min_turn_time_in_bytes(speed, min_turn_time); -} - -/* - * Function irlap_flush_all_queues (void) - * - * Flush all queues - * - */ -void irlap_flush_all_queues(struct irlap_cb *self) -{ - struct sk_buff* skb; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Free transmission queue */ - while ((skb = skb_dequeue(&self->txq)) != NULL) - dev_kfree_skb(skb); - - while ((skb = skb_dequeue(&self->txq_ultra)) != NULL) - dev_kfree_skb(skb); - - /* Free sliding window buffered packets */ - while ((skb = skb_dequeue(&self->wx_list)) != NULL) - dev_kfree_skb(skb); -} - -/* - * Function irlap_setspeed (self, speed) - * - * Change the speed of the IrDA port - * - */ -static void irlap_change_speed(struct irlap_cb *self, __u32 speed, int now) -{ - struct sk_buff *skb; - - pr_debug("%s(), setting speed to %d\n", __func__, speed); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - self->speed = speed; - - /* Change speed now, or just piggyback speed on frames */ - if (now) { - /* Send down empty frame to trigger speed change */ - skb = alloc_skb(0, GFP_ATOMIC); - if (skb) - irlap_queue_xmit(self, skb); - } -} - -/* - * Function irlap_init_qos_capabilities (self, qos) - * - * Initialize QoS for this IrLAP session, What we do is to compute the - * intersection of the QoS capabilities for the user, driver and for - * IrLAP itself. Normally, IrLAP will not specify any values, but it can - * be used to restrict certain values. - */ -static void irlap_init_qos_capabilities(struct irlap_cb *self, - struct qos_info *qos_user) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(self->netdev != NULL, return;); - - /* Start out with the maximum QoS support possible */ - irda_init_max_qos_capabilies(&self->qos_rx); - - /* Apply drivers QoS capabilities */ - irda_qos_compute_intersection(&self->qos_rx, self->qos_dev); - - /* - * Check for user supplied QoS parameters. The service user is only - * allowed to supply these values. We check each parameter since the - * user may not have set all of them. - */ - if (qos_user) { - pr_debug("%s(), Found user specified QoS!\n", __func__); - - if (qos_user->baud_rate.bits) - self->qos_rx.baud_rate.bits &= qos_user->baud_rate.bits; - - if (qos_user->max_turn_time.bits) - self->qos_rx.max_turn_time.bits &= qos_user->max_turn_time.bits; - if (qos_user->data_size.bits) - self->qos_rx.data_size.bits &= qos_user->data_size.bits; - - if (qos_user->link_disc_time.bits) - self->qos_rx.link_disc_time.bits &= qos_user->link_disc_time.bits; - } - - /* Use 500ms in IrLAP for now */ - self->qos_rx.max_turn_time.bits &= 0x01; - - /* Set data size */ - /*self->qos_rx.data_size.bits &= 0x03;*/ - - irda_qos_bits_to_value(&self->qos_rx); -} - -/* - * Function irlap_apply_default_connection_parameters (void, now) - * - * Use the default connection and transmission parameters - */ -void irlap_apply_default_connection_parameters(struct irlap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* xbofs : Default value in NDM */ - self->next_bofs = 12; - self->bofs_count = 12; - - /* NDM Speed is 9600 */ - irlap_change_speed(self, 9600, TRUE); - - /* Set mbusy when going to NDM state */ - irda_device_set_media_busy(self->netdev, TRUE); - - /* - * Generate random connection address for this session, which must - * be 7 bits wide and different from 0x00 and 0xfe - */ - while ((self->caddr == 0x00) || (self->caddr == 0xfe)) { - get_random_bytes(&self->caddr, sizeof(self->caddr)); - self->caddr &= 0xfe; - } - - /* Use default values until connection has been negitiated */ - self->slot_timeout = sysctl_slot_timeout; - self->final_timeout = FINAL_TIMEOUT; - self->poll_timeout = POLL_TIMEOUT; - self->wd_timeout = WD_TIMEOUT; - - /* Set some default values */ - self->qos_tx.baud_rate.value = 9600; - self->qos_rx.baud_rate.value = 9600; - self->qos_tx.max_turn_time.value = 0; - self->qos_rx.max_turn_time.value = 0; - self->qos_tx.min_turn_time.value = 0; - self->qos_rx.min_turn_time.value = 0; - self->qos_tx.data_size.value = 64; - self->qos_rx.data_size.value = 64; - self->qos_tx.window_size.value = 1; - self->qos_rx.window_size.value = 1; - self->qos_tx.additional_bofs.value = 12; - self->qos_rx.additional_bofs.value = 12; - self->qos_tx.link_disc_time.value = 0; - self->qos_rx.link_disc_time.value = 0; - - irlap_flush_all_queues(self); - - self->disconnect_pending = FALSE; - self->connect_pending = FALSE; -} - -/* - * Function irlap_apply_connection_parameters (qos, now) - * - * Initialize IrLAP with the negotiated QoS values - * - * If 'now' is false, the speed and xbofs will be changed after the next - * frame is sent. - * If 'now' is true, the speed and xbofs is changed immediately - */ -void irlap_apply_connection_parameters(struct irlap_cb *self, int now) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Set the negotiated xbofs value */ - self->next_bofs = self->qos_tx.additional_bofs.value; - if (now) - self->bofs_count = self->next_bofs; - - /* Set the negotiated link speed (may need the new xbofs value) */ - irlap_change_speed(self, self->qos_tx.baud_rate.value, now); - - self->window_size = self->qos_tx.window_size.value; - self->window = self->qos_tx.window_size.value; - -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - /* - * Calculate how many bytes it is possible to transmit before the - * link must be turned around - */ - self->line_capacity = - irlap_max_line_capacity(self->qos_tx.baud_rate.value, - self->qos_tx.max_turn_time.value); - self->bytes_left = self->line_capacity; -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - - - /* - * Initialize timeout values, some of the rules are listed on - * page 92 in IrLAP. - */ - IRDA_ASSERT(self->qos_tx.max_turn_time.value != 0, return;); - IRDA_ASSERT(self->qos_rx.max_turn_time.value != 0, return;); - /* The poll timeout applies only to the primary station. - * It defines the maximum time the primary stay in XMIT mode - * before timeout and turning the link around (sending a RR). - * Or, this is how much we can keep the pf bit in primary mode. - * Therefore, it must be lower or equal than our *OWN* max turn around. - * Jean II */ - self->poll_timeout = msecs_to_jiffies( - self->qos_tx.max_turn_time.value); - /* The Final timeout applies only to the primary station. - * It defines the maximum time the primary wait (mostly in RECV mode) - * for an answer from the secondary station before polling it again. - * Therefore, it must be greater or equal than our *PARTNER* - * max turn around time - Jean II */ - self->final_timeout = msecs_to_jiffies( - self->qos_rx.max_turn_time.value); - /* The Watchdog Bit timeout applies only to the secondary station. - * It defines the maximum time the secondary wait (mostly in RECV mode) - * for poll from the primary station before getting annoyed. - * Therefore, it must be greater or equal than our *PARTNER* - * max turn around time - Jean II */ - self->wd_timeout = self->final_timeout * 2; - - /* - * N1 and N2 are maximum retry count for *both* the final timer - * and the wd timer (with a factor 2) as defined above. - * After N1 retry of a timer, we give a warning to the user. - * After N2 retry, we consider the link dead and disconnect it. - * Jean II - */ - - /* - * Set N1 to 0 if Link Disconnect/Threshold Time = 3 and set it to - * 3 seconds otherwise. See page 71 in IrLAP for more details. - * Actually, it's not always 3 seconds, as we allow to set - * it via sysctl... Max maxtt is 500ms, and N1 need to be multiple - * of 2, so 1 second is minimum we can allow. - Jean II - */ - if (self->qos_tx.link_disc_time.value == sysctl_warn_noreply_time) - /* - * If we set N1 to 0, it will trigger immediately, which is - * not what we want. What we really want is to disable it, - * Jean II - */ - self->N1 = -2; /* Disable - Need to be multiple of 2*/ - else - self->N1 = sysctl_warn_noreply_time * 1000 / - self->qos_rx.max_turn_time.value; - - pr_debug("Setting N1 = %d\n", self->N1); - - /* Set N2 to match our own disconnect time */ - self->N2 = self->qos_tx.link_disc_time.value * 1000 / - self->qos_rx.max_turn_time.value; - pr_debug("Setting N2 = %d\n", self->N2); -} - -#ifdef CONFIG_PROC_FS -struct irlap_iter_state { - int id; -}; - -static void *irlap_seq_start(struct seq_file *seq, loff_t *pos) -{ - struct irlap_iter_state *iter = seq->private; - struct irlap_cb *self; - - /* Protect our access to the tsap list */ - spin_lock_irq(&irlap->hb_spinlock); - iter->id = 0; - - for (self = (struct irlap_cb *) hashbin_get_first(irlap); - self; self = (struct irlap_cb *) hashbin_get_next(irlap)) { - if (iter->id == *pos) - break; - ++iter->id; - } - - return self; -} - -static void *irlap_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct irlap_iter_state *iter = seq->private; - - ++*pos; - ++iter->id; - return (void *) hashbin_get_next(irlap); -} - -static void irlap_seq_stop(struct seq_file *seq, void *v) -{ - spin_unlock_irq(&irlap->hb_spinlock); -} - -static int irlap_seq_show(struct seq_file *seq, void *v) -{ - const struct irlap_iter_state *iter = seq->private; - const struct irlap_cb *self = v; - - IRDA_ASSERT(self->magic == LAP_MAGIC, return -EINVAL;); - - seq_printf(seq, "irlap%d ", iter->id); - seq_printf(seq, "state: %s\n", - irlap_state[self->state]); - - seq_printf(seq, " device name: %s, ", - (self->netdev) ? self->netdev->name : "bug"); - seq_printf(seq, "hardware name: %s\n", self->hw_name); - - seq_printf(seq, " caddr: %#02x, ", self->caddr); - seq_printf(seq, "saddr: %#08x, ", self->saddr); - seq_printf(seq, "daddr: %#08x\n", self->daddr); - - seq_printf(seq, " win size: %d, ", - self->window_size); - seq_printf(seq, "win: %d, ", self->window); -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - seq_printf(seq, "line capacity: %d, ", - self->line_capacity); - seq_printf(seq, "bytes left: %d\n", self->bytes_left); -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - seq_printf(seq, " tx queue len: %d ", - skb_queue_len(&self->txq)); - seq_printf(seq, "win queue len: %d ", - skb_queue_len(&self->wx_list)); - seq_printf(seq, "rbusy: %s", self->remote_busy ? - "TRUE" : "FALSE"); - seq_printf(seq, " mbusy: %s\n", self->media_busy ? - "TRUE" : "FALSE"); - - seq_printf(seq, " retrans: %d ", self->retry_count); - seq_printf(seq, "vs: %d ", self->vs); - seq_printf(seq, "vr: %d ", self->vr); - seq_printf(seq, "va: %d\n", self->va); - - seq_printf(seq, " qos\tbps\tmaxtt\tdsize\twinsize\taddbofs\tmintt\tldisc\tcomp\n"); - - seq_printf(seq, " tx\t%d\t", - self->qos_tx.baud_rate.value); - seq_printf(seq, "%d\t", - self->qos_tx.max_turn_time.value); - seq_printf(seq, "%d\t", - self->qos_tx.data_size.value); - seq_printf(seq, "%d\t", - self->qos_tx.window_size.value); - seq_printf(seq, "%d\t", - self->qos_tx.additional_bofs.value); - seq_printf(seq, "%d\t", - self->qos_tx.min_turn_time.value); - seq_printf(seq, "%d\t", - self->qos_tx.link_disc_time.value); - seq_printf(seq, "\n"); - - seq_printf(seq, " rx\t%d\t", - self->qos_rx.baud_rate.value); - seq_printf(seq, "%d\t", - self->qos_rx.max_turn_time.value); - seq_printf(seq, "%d\t", - self->qos_rx.data_size.value); - seq_printf(seq, "%d\t", - self->qos_rx.window_size.value); - seq_printf(seq, "%d\t", - self->qos_rx.additional_bofs.value); - seq_printf(seq, "%d\t", - self->qos_rx.min_turn_time.value); - seq_printf(seq, "%d\n", - self->qos_rx.link_disc_time.value); - - return 0; -} - -static const struct seq_operations irlap_seq_ops = { - .start = irlap_seq_start, - .next = irlap_seq_next, - .stop = irlap_seq_stop, - .show = irlap_seq_show, -}; - -static int irlap_seq_open(struct inode *inode, struct file *file) -{ - if (irlap == NULL) - return -EINVAL; - - return seq_open_private(file, &irlap_seq_ops, - sizeof(struct irlap_iter_state)); -} - -const struct file_operations irlap_seq_fops = { - .owner = THIS_MODULE, - .open = irlap_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release_private, -}; - -#endif /* CONFIG_PROC_FS */ diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c deleted file mode 100644 index 0e1b4d79f745..000000000000 --- a/net/irda/irlap_event.c +++ /dev/null @@ -1,2316 +0,0 @@ -/********************************************************************* - * - * Filename: irlap_event.c - * Version: 0.9 - * Description: IrLAP state machine implementation - * Status: Experimental. - * Author: Dag Brattli <dag@brattli.net> - * Created at: Sat Aug 16 00:59:29 1997 - * Modified at: Sat Dec 25 21:07:57 1999 - * Modified by: Dag Brattli <dag@brattli.net> - * - * Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>, - * Copyright (c) 1998 Thomas Davis <ratbert@radiks.net> - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/slab.h> - -#include <net/irda/irda.h> -#include <net/irda/irlap_event.h> - -#include <net/irda/timer.h> -#include <net/irda/irlap.h> -#include <net/irda/irlap_frame.h> -#include <net/irda/qos.h> -#include <net/irda/parameters.h> -#include <net/irda/irlmp.h> /* irlmp_flow_indication(), ... */ - -#include <net/irda/irda_device.h> - -#ifdef CONFIG_IRDA_FAST_RR -int sysctl_fast_poll_increase = 50; -#endif - -static int irlap_state_ndm (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_query (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_reply (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_conn (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_setup (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_xmit_p (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_pclose (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_nrm_p (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_reset (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_nrm_s (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_xmit_s (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_sclose (struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info); -static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event, - struct sk_buff *, struct irlap_info *); - -static const char *const irlap_event[] __maybe_unused = { - "DISCOVERY_REQUEST", - "CONNECT_REQUEST", - "CONNECT_RESPONSE", - "DISCONNECT_REQUEST", - "DATA_REQUEST", - "RESET_REQUEST", - "RESET_RESPONSE", - "SEND_I_CMD", - "SEND_UI_FRAME", - "RECV_DISCOVERY_XID_CMD", - "RECV_DISCOVERY_XID_RSP", - "RECV_SNRM_CMD", - "RECV_TEST_CMD", - "RECV_TEST_RSP", - "RECV_UA_RSP", - "RECV_DM_RSP", - "RECV_RD_RSP", - "RECV_I_CMD", - "RECV_I_RSP", - "RECV_UI_FRAME", - "RECV_FRMR_RSP", - "RECV_RR_CMD", - "RECV_RR_RSP", - "RECV_RNR_CMD", - "RECV_RNR_RSP", - "RECV_REJ_CMD", - "RECV_REJ_RSP", - "RECV_SREJ_CMD", - "RECV_SREJ_RSP", - "RECV_DISC_CMD", - "SLOT_TIMER_EXPIRED", - "QUERY_TIMER_EXPIRED", - "FINAL_TIMER_EXPIRED", - "POLL_TIMER_EXPIRED", - "DISCOVERY_TIMER_EXPIRED", - "WD_TIMER_EXPIRED", - "BACKOFF_TIMER_EXPIRED", - "MEDIA_BUSY_TIMER_EXPIRED", -}; - -const char *const irlap_state[] = { - "LAP_NDM", - "LAP_QUERY", - "LAP_REPLY", - "LAP_CONN", - "LAP_SETUP", - "LAP_OFFLINE", - "LAP_XMIT_P", - "LAP_PCLOSE", - "LAP_NRM_P", - "LAP_RESET_WAIT", - "LAP_RESET", - "LAP_NRM_S", - "LAP_XMIT_S", - "LAP_SCLOSE", - "LAP_RESET_CHECK", -}; - -static int (*state[])(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) = -{ - irlap_state_ndm, - irlap_state_query, - irlap_state_reply, - irlap_state_conn, - irlap_state_setup, - irlap_state_offline, - irlap_state_xmit_p, - irlap_state_pclose, - irlap_state_nrm_p, - irlap_state_reset_wait, - irlap_state_reset, - irlap_state_nrm_s, - irlap_state_xmit_s, - irlap_state_sclose, - irlap_state_reset_check, -}; - -/* - * Function irda_poll_timer_expired (data) - * - * Poll timer has expired. Normally we must now send a RR frame to the - * remote device - */ -static void irlap_poll_timer_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL); -} - -/* - * Calculate and set time before we will have to send back the pf bit - * to the peer. Use in primary. - * Make sure that state is XMIT_P/XMIT_S when calling this function - * (and that nobody messed up with the state). - Jean II - */ -static void irlap_start_poll_timer(struct irlap_cb *self, int timeout) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - -#ifdef CONFIG_IRDA_FAST_RR - /* - * Send out the RR frames faster if our own transmit queue is empty, or - * if the peer is busy. The effect is a much faster conversation - */ - if (skb_queue_empty(&self->txq) || self->remote_busy) { - if (self->fast_RR == TRUE) { - /* - * Assert that the fast poll timer has not reached the - * normal poll timer yet - */ - if (self->fast_RR_timeout < timeout) { - /* - * FIXME: this should be a more configurable - * function - */ - self->fast_RR_timeout += - (sysctl_fast_poll_increase * HZ/1000); - - /* Use this fast(er) timeout instead */ - timeout = self->fast_RR_timeout; - } - } else { - self->fast_RR = TRUE; - - /* Start with just 0 ms */ - self->fast_RR_timeout = 0; - timeout = 0; - } - } else - self->fast_RR = FALSE; - - pr_debug("%s(), timeout=%d (%ld)\n", __func__, timeout, jiffies); -#endif /* CONFIG_IRDA_FAST_RR */ - - if (timeout == 0) - irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL); - else - irda_start_timer(&self->poll_timer, timeout, self, - irlap_poll_timer_expired); -} - -/* - * Function irlap_do_event (event, skb, info) - * - * Rushes through the state machine without any delay. If state == XMIT - * then send queued data frames. - */ -void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret; - - if (!self || self->magic != LAP_MAGIC) - return; - - pr_debug("%s(), event = %s, state = %s\n", __func__, - irlap_event[event], irlap_state[self->state]); - - ret = (*state[self->state])(self, event, skb, info); - - /* - * Check if there are any pending events that needs to be executed - */ - switch (self->state) { - case LAP_XMIT_P: /* FALLTHROUGH */ - case LAP_XMIT_S: - /* - * We just received the pf bit and are at the beginning - * of a new LAP transmit window. - * Check if there are any queued data frames, and do not - * try to disconnect link if we send any data frames, since - * that will change the state away form XMIT - */ - pr_debug("%s() : queue len = %d\n", __func__, - skb_queue_len(&self->txq)); - - if (!skb_queue_empty(&self->txq)) { - /* Prevent race conditions with irlap_data_request() */ - self->local_busy = TRUE; - - /* Theory of operation. - * We send frames up to when we fill the window or - * reach line capacity. Those frames will queue up - * in the device queue, and the driver will slowly - * send them. - * After each frame that we send, we poll the higher - * layer for more data. It's the right time to do - * that because the link layer need to perform the mtt - * and then send the first frame, so we can afford - * to send a bit of time in kernel space. - * The explicit flow indication allow to minimise - * buffers (== lower latency), to avoid higher layer - * polling via timers (== less context switches) and - * to implement a crude scheduler - Jean II */ - - /* Try to send away all queued data frames */ - while ((skb = skb_dequeue(&self->txq)) != NULL) { - /* Send one frame */ - ret = (*state[self->state])(self, SEND_I_CMD, - skb, NULL); - /* Drop reference count. - * It will be increase as needed in - * irlap_send_data_xxx() */ - kfree_skb(skb); - - /* Poll the higher layers for one more frame */ - irlmp_flow_indication(self->notify.instance, - FLOW_START); - - if (ret == -EPROTO) - break; /* Try again later! */ - } - /* Finished transmitting */ - self->local_busy = FALSE; - } else if (self->disconnect_pending) { - self->disconnect_pending = FALSE; - - ret = (*state[self->state])(self, DISCONNECT_REQUEST, - NULL, NULL); - } - break; -/* case LAP_NDM: */ -/* case LAP_CONN: */ -/* case LAP_RESET_WAIT: */ -/* case LAP_RESET_CHECK: */ - default: - break; - } -} - -/* - * Function irlap_state_ndm (event, skb, frame) - * - * NDM (Normal Disconnected Mode) state - * - */ -static int irlap_state_ndm(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - discovery_t *discovery_rsp; - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case CONNECT_REQUEST: - IRDA_ASSERT(self->netdev != NULL, return -1;); - - if (self->media_busy) { - /* Note : this will never happen, because we test - * media busy in irlap_connect_request() and - * postpone the event... - Jean II */ - pr_debug("%s(), CONNECT_REQUEST: media busy!\n", - __func__); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_MEDIA_BUSY); - } else { - irlap_send_snrm_frame(self, &self->qos_rx); - - /* Start Final-bit timer */ - irlap_start_final_timer(self, self->final_timeout); - - self->retry_count = 0; - irlap_next_state(self, LAP_SETUP); - } - break; - case RECV_SNRM_CMD: - /* Check if the frame contains and I field */ - if (info) { - self->daddr = info->daddr; - self->caddr = info->caddr; - - irlap_next_state(self, LAP_CONN); - - irlap_connect_indication(self, skb); - } else { - pr_debug("%s(), SNRM frame does not contain an I field!\n", - __func__); - } - break; - case DISCOVERY_REQUEST: - IRDA_ASSERT(info != NULL, return -1;); - - if (self->media_busy) { - pr_debug("%s(), DISCOVERY_REQUEST: media busy!\n", - __func__); - /* irlap->log.condition = MEDIA_BUSY; */ - - /* This will make IrLMP try again */ - irlap_discovery_confirm(self, NULL); - /* Note : the discovery log is not cleaned up here, - * it will be done in irlap_discovery_request() - * Jean II */ - return 0; - } - - self->S = info->S; - self->s = info->s; - irlap_send_discovery_xid_frame(self, info->S, info->s, TRUE, - info->discovery); - self->frame_sent = FALSE; - self->s++; - - irlap_start_slot_timer(self, self->slot_timeout); - irlap_next_state(self, LAP_QUERY); - break; - case RECV_DISCOVERY_XID_CMD: - IRDA_ASSERT(info != NULL, return -1;); - - /* Assert that this is not the final slot */ - if (info->s <= info->S) { - self->slot = irlap_generate_rand_time_slot(info->S, - info->s); - if (self->slot == info->s) { - discovery_rsp = irlmp_get_discovery_response(); - discovery_rsp->data.daddr = info->daddr; - - irlap_send_discovery_xid_frame(self, info->S, - self->slot, - FALSE, - discovery_rsp); - self->frame_sent = TRUE; - } else - self->frame_sent = FALSE; - - /* - * Go to reply state until end of discovery to - * inhibit our own transmissions. Set the timer - * to not stay forever there... Jean II - */ - irlap_start_query_timer(self, info->S, info->s); - irlap_next_state(self, LAP_REPLY); - } else { - /* This is the final slot. How is it possible ? - * This would happen is both discoveries are just slightly - * offset (if they are in sync, all packets are lost). - * Most often, all the discovery requests will be received - * in QUERY state (see my comment there), except for the - * last frame that will come here. - * The big trouble when it happen is that active discovery - * doesn't happen, because nobody answer the discoveries - * frame of the other guy, so the log shows up empty. - * What should we do ? - * Not much. It's too late to answer those discovery frames, - * so we just pass the info to IrLMP who will put it in the - * log (and post an event). - * Another cause would be devices that do discovery much - * slower than us, however the latest fixes should minimise - * those cases... - * Jean II - */ - pr_debug("%s(), Receiving final discovery request, missed the discovery slots :-(\n", - __func__); - - /* Last discovery request -> in the log */ - irlap_discovery_indication(self, info->discovery); - } - break; - case MEDIA_BUSY_TIMER_EXPIRED: - /* A bunch of events may be postponed because the media is - * busy (usually immediately after we close a connection), - * or while we are doing discovery (state query/reply). - * In all those cases, the media busy flag will be cleared - * when it's OK for us to process those postponed events. - * This event is not mentioned in the state machines in the - * IrLAP spec. It's because they didn't consider Ultra and - * postponing connection request is optional. - * Jean II */ -#ifdef CONFIG_IRDA_ULTRA - /* Send any pending Ultra frames if any */ - if (!skb_queue_empty(&self->txq_ultra)) { - /* We don't send the frame, just post an event. - * Also, previously this code was in timer.c... - * Jean II */ - ret = (*state[self->state])(self, SEND_UI_FRAME, - NULL, NULL); - } -#endif /* CONFIG_IRDA_ULTRA */ - /* Check if we should try to connect. - * This code was previously in irlap_do_event() */ - if (self->connect_pending) { - self->connect_pending = FALSE; - - /* This one *should* not pend in this state, except - * if a socket try to connect and immediately - * disconnect. - clear - Jean II */ - if (self->disconnect_pending) - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - else - ret = (*state[self->state])(self, - CONNECT_REQUEST, - NULL, NULL); - self->disconnect_pending = FALSE; - } - /* Note : one way to test if this code works well (including - * media busy and small busy) is to create a user space - * application generating an Ultra packet every 3.05 sec (or - * 2.95 sec) and to see how it interact with discovery. - * It's fairly easy to check that no packet is lost, that the - * packets are postponed during discovery and that after - * discovery indication you have a 100ms "gap". - * As connection request and Ultra are now processed the same - * way, this avoid the tedious job of trying IrLAP connection - * in all those cases... - * Jean II */ - break; -#ifdef CONFIG_IRDA_ULTRA - case SEND_UI_FRAME: - { - int i; - /* Only allowed to repeat an operation twice */ - for (i=0; ((i<2) && (self->media_busy == FALSE)); i++) { - skb = skb_dequeue(&self->txq_ultra); - if (skb) - irlap_send_ui_frame(self, skb, CBROADCAST, - CMD_FRAME); - else - break; - /* irlap_send_ui_frame() won't increase skb reference - * count, so no dev_kfree_skb() - Jean II */ - } - if (i == 2) { - /* Force us to listen 500 ms again */ - irda_device_set_media_busy(self->netdev, TRUE); - } - break; - } - case RECV_UI_FRAME: - /* Only accept broadcast frames in NDM mode */ - if (info->caddr != CBROADCAST) { - pr_debug("%s(), not a broadcast frame!\n", - __func__); - } else - irlap_unitdata_indication(self, skb); - break; -#endif /* CONFIG_IRDA_ULTRA */ - case RECV_TEST_CMD: - /* Remove test frame header */ - skb_pull(skb, sizeof(struct test_frame)); - - /* - * Send response. This skb will not be sent out again, and - * will only be used to send out the same info as the cmd - */ - irlap_send_test_frame(self, CBROADCAST, info->daddr, skb); - break; - case RECV_TEST_RSP: - pr_debug("%s() not implemented!\n", __func__); - break; - default: - pr_debug("%s(), Unknown event %s\n", __func__, - irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_query (event, skb, info) - * - * QUERY state - * - */ -static int irlap_state_query(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case RECV_DISCOVERY_XID_RSP: - IRDA_ASSERT(info != NULL, return -1;); - IRDA_ASSERT(info->discovery != NULL, return -1;); - - pr_debug("%s(), daddr=%08x\n", __func__, - info->discovery->data.daddr); - - if (!self->discovery_log) { - net_warn_ratelimited("%s: discovery log is gone! maybe the discovery timeout has been set too short?\n", - __func__); - break; - } - hashbin_insert(self->discovery_log, - (irda_queue_t *) info->discovery, - info->discovery->data.daddr, NULL); - - /* Keep state */ - /* irlap_next_state(self, LAP_QUERY); */ - - break; - case RECV_DISCOVERY_XID_CMD: - /* Yes, it is possible to receive those frames in this mode. - * Note that most often the last discovery request won't - * occur here but in NDM state (see my comment there). - * What should we do ? - * Not much. We are currently performing our own discovery, - * therefore we can't answer those frames. We don't want - * to change state either. We just pass the info to - * IrLMP who will put it in the log (and post an event). - * Jean II - */ - - IRDA_ASSERT(info != NULL, return -1;); - - pr_debug("%s(), Receiving discovery request (s = %d) while performing discovery :-(\n", - __func__, info->s); - - /* Last discovery request ? */ - if (info->s == 0xff) - irlap_discovery_indication(self, info->discovery); - break; - case SLOT_TIMER_EXPIRED: - /* - * Wait a little longer if we detect an incoming frame. This - * is not mentioned in the spec, but is a good thing to do, - * since we want to work even with devices that violate the - * timing requirements. - */ - if (irda_device_is_receiving(self->netdev) && !self->add_wait) { - pr_debug("%s(), device is slow to answer, waiting some more!\n", - __func__); - irlap_start_slot_timer(self, msecs_to_jiffies(10)); - self->add_wait = TRUE; - return ret; - } - self->add_wait = FALSE; - - if (self->s < self->S) { - irlap_send_discovery_xid_frame(self, self->S, - self->s, TRUE, - self->discovery_cmd); - self->s++; - irlap_start_slot_timer(self, self->slot_timeout); - - /* Keep state */ - irlap_next_state(self, LAP_QUERY); - } else { - /* This is the final slot! */ - irlap_send_discovery_xid_frame(self, self->S, 0xff, - TRUE, - self->discovery_cmd); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - /* - * We are now finished with the discovery procedure, - * so now we must return the results - */ - irlap_discovery_confirm(self, self->discovery_log); - - /* IrLMP should now have taken care of the log */ - self->discovery_log = NULL; - } - break; - default: - pr_debug("%s(), Unknown event %s\n", __func__, - irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_reply (self, event, skb, info) - * - * REPLY, we have received a XID discovery frame from a device and we - * are waiting for the right time slot to send a response XID frame - * - */ -static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - discovery_t *discovery_rsp; - int ret=0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case QUERY_TIMER_EXPIRED: - pr_debug("%s(), QUERY_TIMER_EXPIRED <%ld>\n", - __func__, jiffies); - irlap_next_state(self, LAP_NDM); - break; - case RECV_DISCOVERY_XID_CMD: - IRDA_ASSERT(info != NULL, return -1;); - /* Last frame? */ - if (info->s == 0xff) { - del_timer(&self->query_timer); - - /* info->log.condition = REMOTE; */ - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_discovery_indication(self, info->discovery); - } else { - /* If it's our slot, send our reply */ - if ((info->s >= self->slot) && (!self->frame_sent)) { - discovery_rsp = irlmp_get_discovery_response(); - discovery_rsp->data.daddr = info->daddr; - - irlap_send_discovery_xid_frame(self, info->S, - self->slot, - FALSE, - discovery_rsp); - - self->frame_sent = TRUE; - } - /* Readjust our timer to accommodate devices - * doing faster or slower discovery than us... - * Jean II */ - irlap_start_query_timer(self, info->S, info->s); - - /* Keep state */ - //irlap_next_state(self, LAP_REPLY); - } - break; - default: - pr_debug("%s(), Unknown event %d, %s\n", __func__, - event, irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_conn (event, skb, info) - * - * CONN, we have received a SNRM command and is waiting for the upper - * layer to accept or refuse connection - * - */ -static int irlap_state_conn(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case CONNECT_RESPONSE: - skb_pull(skb, sizeof(struct snrm_frame)); - - IRDA_ASSERT(self->netdev != NULL, return -1;); - - irlap_qos_negotiate(self, skb); - - irlap_initiate_connection_state(self); - - /* - * Applying the parameters now will make sure we change speed - * *after* we have sent the next frame - */ - irlap_apply_connection_parameters(self, FALSE); - - /* - * Sending this frame will force a speed change after it has - * been sent (i.e. the frame will be sent at 9600). - */ - irlap_send_ua_response_frame(self, &self->qos_rx); - -#if 0 - /* - * We are allowed to send two frames, but this may increase - * the connect latency, so lets not do it for now. - */ - /* This is full of good intentions, but doesn't work in - * practice. - * After sending the first UA response, we switch the - * dongle to the negotiated speed, which is usually - * different than 9600 kb/s. - * From there, there is two solutions : - * 1) The other end has received the first UA response : - * it will set up the connection, move to state LAP_NRM_P, - * and will ignore and drop the second UA response. - * Actually, it's even worse : the other side will almost - * immediately send a RR that will likely collide with the - * UA response (depending on negotiated turnaround). - * 2) The other end has not received the first UA response, - * will stay at 9600 and will never see the second UA response. - * Jean II */ - irlap_send_ua_response_frame(self, &self->qos_rx); -#endif - - /* - * The WD-timer could be set to the duration of the P-timer - * for this case, but it is recommended to use twice the - * value (note 3 IrLAP p. 60). - */ - irlap_start_wd_timer(self, self->wd_timeout); - irlap_next_state(self, LAP_NRM_S); - - break; - case RECV_DISCOVERY_XID_CMD: - pr_debug("%s(), event RECV_DISCOVER_XID_CMD!\n", - __func__); - irlap_next_state(self, LAP_NDM); - - break; - case DISCONNECT_REQUEST: - pr_debug("%s(), Disconnect request!\n", __func__); - irlap_send_dm_frame(self); - irlap_next_state( self, LAP_NDM); - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - default: - pr_debug("%s(), Unknown event %d, %s\n", __func__, - event, irlap_event[event]); - - ret = -1; - break; - } - - return ret; -} - -/* - * Function irlap_state_setup (event, skb, frame) - * - * SETUP state, The local layer has transmitted a SNRM command frame to - * a remote peer layer and is awaiting a reply . - * - */ -static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case FINAL_TIMER_EXPIRED: - if (self->retry_count < self->N3) { -/* - * Perform random backoff, Wait a random number of time units, minimum - * duration half the time taken to transmitt a SNRM frame, maximum duration - * 1.5 times the time taken to transmit a SNRM frame. So this time should - * between 15 msecs and 45 msecs. - */ - irlap_start_backoff_timer(self, msecs_to_jiffies(20 + - (jiffies % 30))); - } else { - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_FOUND_NONE); - } - break; - case BACKOFF_TIMER_EXPIRED: - irlap_send_snrm_frame(self, &self->qos_rx); - irlap_start_final_timer(self, self->final_timeout); - self->retry_count++; - break; - case RECV_SNRM_CMD: - pr_debug("%s(), SNRM battle!\n", __func__); - - IRDA_ASSERT(skb != NULL, return 0;); - IRDA_ASSERT(info != NULL, return 0;); - - /* - * The device with the largest device address wins the battle - * (both have sent a SNRM command!) - */ - if (info &&(info->daddr > self->saddr)) { - del_timer(&self->final_timer); - irlap_initiate_connection_state(self); - - IRDA_ASSERT(self->netdev != NULL, return -1;); - - skb_pull(skb, sizeof(struct snrm_frame)); - - irlap_qos_negotiate(self, skb); - - /* Send UA frame and then change link settings */ - irlap_apply_connection_parameters(self, FALSE); - irlap_send_ua_response_frame(self, &self->qos_rx); - - irlap_next_state(self, LAP_NRM_S); - irlap_connect_confirm(self, skb); - - /* - * The WD-timer could be set to the duration of the - * P-timer for this case, but it is recommended - * to use twice the value (note 3 IrLAP p. 60). - */ - irlap_start_wd_timer(self, self->wd_timeout); - } else { - /* We just ignore the other device! */ - irlap_next_state(self, LAP_SETUP); - } - break; - case RECV_UA_RSP: - /* Stop F-timer */ - del_timer(&self->final_timer); - - /* Initiate connection state */ - irlap_initiate_connection_state(self); - - /* Negotiate connection parameters */ - IRDA_ASSERT(skb->len > 10, return -1;); - - skb_pull(skb, sizeof(struct ua_frame)); - - IRDA_ASSERT(self->netdev != NULL, return -1;); - - irlap_qos_negotiate(self, skb); - - /* Set the new link setting *now* (before the rr frame) */ - irlap_apply_connection_parameters(self, TRUE); - self->retry_count = 0; - - /* Wait for turnaround time to give a chance to the other - * device to be ready to receive us. - * Note : the time to switch speed is typically larger - * than the turnaround time, but as we don't have the other - * side speed switch time, that's our best guess... - * Jean II */ - irlap_wait_min_turn_around(self, &self->qos_tx); - - /* This frame will actually be sent at the new speed */ - irlap_send_rr_frame(self, CMD_FRAME); - - /* The timer is set to half the normal timer to quickly - * detect a failure to negotiate the new connection - * parameters. IrLAP 6.11.3.2, note 3. - * Note that currently we don't process this failure - * properly, as we should do a quick disconnect. - * Jean II */ - irlap_start_final_timer(self, self->final_timeout/2); - irlap_next_state(self, LAP_NRM_P); - - irlap_connect_confirm(self, skb); - break; - case RECV_DM_RSP: /* FALLTHROUGH */ - case RECV_DISC_CMD: - del_timer(&self->final_timer); - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - default: - pr_debug("%s(), Unknown event %d, %s\n", __func__, - event, irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_offline (self, event, skb, info) - * - * OFFLINE state, not used for now! - * - */ -static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - pr_debug("%s(), Unknown event\n", __func__); - - return -1; -} - -/* - * Function irlap_state_xmit_p (self, event, skb, info) - * - * XMIT, Only the primary station has right to transmit, and we - * therefore do not expect to receive any transmissions from other - * stations. - * - */ -static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - switch (event) { - case SEND_I_CMD: - /* - * Only send frame if send-window > 0. - */ - if ((self->window > 0) && (!self->remote_busy)) { - int nextfit; -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - struct sk_buff *skb_next; - - /* With DYNAMIC_WINDOW, we keep the window size - * maximum, and adapt on the packets we are sending. - * At 115k, we can send only 2 packets of 2048 bytes - * in a 500 ms turnaround. Without this option, we - * would always limit the window to 2. With this - * option, if we send smaller packets, we can send - * up to 7 of them (always depending on QoS). - * Jean II */ - - /* Look at the next skb. This is safe, as we are - * the only consumer of the Tx queue (if we are not, - * we have other problems) - Jean II */ - skb_next = skb_peek(&self->txq); - - /* Check if a subsequent skb exist and would fit in - * the current window (with respect to turnaround - * time). - * This allow us to properly mark the current packet - * with the pf bit, to avoid falling back on the - * second test below, and avoid waiting the - * end of the window and sending a extra RR. - * Note : (skb_next != NULL) <=> (skb_queue_len() > 0) - * Jean II */ - nextfit = ((skb_next != NULL) && - ((skb_next->len + skb->len) <= - self->bytes_left)); - - /* - * The current packet may not fit ! Because of test - * above, this should not happen any more !!! - * Test if we have transmitted more bytes over the - * link than its possible to do with the current - * speed and turn-around-time. - */ - if((!nextfit) && (skb->len > self->bytes_left)) { - pr_debug("%s(), Not allowed to transmit more bytes!\n", - __func__); - /* Requeue the skb */ - skb_queue_head(&self->txq, skb_get(skb)); - /* - * We should switch state to LAP_NRM_P, but - * that is not possible since we must be sure - * that we poll the other side. Since we have - * used up our time, the poll timer should - * trigger anyway now, so we just wait for it - * DB - */ - /* - * Sorry, but that's not totally true. If - * we send 2000B packets, we may wait another - * 1000B until our turnaround expire. That's - * why we need to be proactive in avoiding - * coming here. - Jean II - */ - return -EPROTO; - } - - /* Subtract space used by this skb */ - self->bytes_left -= skb->len; -#else /* CONFIG_IRDA_DYNAMIC_WINDOW */ - /* Window has been adjusted for the max packet - * size, so much simpler... - Jean II */ - nextfit = !skb_queue_empty(&self->txq); -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - /* - * Send data with poll bit cleared only if window > 1 - * and there is more frames after this one to be sent - */ - if ((self->window > 1) && (nextfit)) { - /* More packet to send in current window */ - irlap_send_data_primary(self, skb); - irlap_next_state(self, LAP_XMIT_P); - } else { - /* Final packet of window */ - irlap_send_data_primary_poll(self, skb); - - /* - * Make sure state machine does not try to send - * any more frames - */ - ret = -EPROTO; - } -#ifdef CONFIG_IRDA_FAST_RR - /* Peer may want to reply immediately */ - self->fast_RR = FALSE; -#endif /* CONFIG_IRDA_FAST_RR */ - } else { - pr_debug("%s(), Unable to send! remote busy?\n", - __func__); - skb_queue_head(&self->txq, skb_get(skb)); - - /* - * The next ret is important, because it tells - * irlap_next_state _not_ to deliver more frames - */ - ret = -EPROTO; - } - break; - case POLL_TIMER_EXPIRED: - pr_debug("%s(), POLL_TIMER_EXPIRED <%ld>\n", - __func__, jiffies); - irlap_send_rr_frame(self, CMD_FRAME); - /* Return to NRM properly - Jean II */ - self->window = self->window_size; -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - /* Allowed to transmit a maximum number of bytes again. */ - self->bytes_left = self->line_capacity; -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - irlap_start_final_timer(self, self->final_timeout); - irlap_next_state(self, LAP_NRM_P); - break; - case DISCONNECT_REQUEST: - del_timer(&self->poll_timer); - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_disc_frame(self); - irlap_flush_all_queues(self); - irlap_start_final_timer(self, self->final_timeout); - self->retry_count = 0; - irlap_next_state(self, LAP_PCLOSE); - break; - case DATA_REQUEST: - /* Nothing to do, irlap_do_event() will send the packet - * when we return... - Jean II */ - break; - default: - pr_debug("%s(), Unknown event %s\n", - __func__, irlap_event[event]); - - ret = -EINVAL; - break; - } - return ret; -} - -/* - * Function irlap_state_pclose (event, skb, info) - * - * PCLOSE state - */ -static int irlap_state_pclose(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case RECV_UA_RSP: /* FALLTHROUGH */ - case RECV_DM_RSP: - del_timer(&self->final_timer); - - /* Set new link parameters */ - irlap_apply_default_connection_parameters(self); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - case FINAL_TIMER_EXPIRED: - if (self->retry_count < self->N3) { - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_disc_frame(self); - irlap_start_final_timer(self, self->final_timeout); - self->retry_count++; - /* Keep state */ - } else { - irlap_apply_default_connection_parameters(self); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_NO_RESPONSE); - } - break; - default: - pr_debug("%s(), Unknown event %d\n", __func__, event); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_nrm_p (self, event, skb, info) - * - * NRM_P (Normal Response Mode as Primary), The primary station has given - * permissions to a secondary station to transmit IrLAP resonse frames - * (by sending a frame with the P bit set). The primary station will not - * transmit any frames and is expecting to receive frames only from the - * secondary to which transmission permissions has been given. - */ -static int irlap_state_nrm_p(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - int ns_status; - int nr_status; - - switch (event) { - case RECV_I_RSP: /* Optimize for the common case */ - if (unlikely(skb->len <= LAP_ADDR_HEADER + LAP_CTRL_HEADER)) { - /* - * Input validation check: a stir4200/mcp2150 - * combination sometimes results in an empty i:rsp. - * This makes no sense; we can just ignore the frame - * and send an rr:cmd immediately. This happens before - * changing nr or ns so triggers a retransmit - */ - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, CMD_FRAME); - /* Keep state */ - break; - } - /* FIXME: must check for remote_busy below */ -#ifdef CONFIG_IRDA_FAST_RR - /* - * Reset the fast_RR so we can use the fast RR code with - * full speed the next time since peer may have more frames - * to transmitt - */ - self->fast_RR = FALSE; -#endif /* CONFIG_IRDA_FAST_RR */ - IRDA_ASSERT( info != NULL, return -1;); - - ns_status = irlap_validate_ns_received(self, info->ns); - nr_status = irlap_validate_nr_received(self, info->nr); - - /* - * Check for expected I(nformation) frame - */ - if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) { - - /* Update Vr (next frame for us to receive) */ - self->vr = (self->vr + 1) % 8; - - /* Update Nr received, cleanup our retry queue */ - irlap_update_nr_received(self, info->nr); - - /* - * Got expected NR, so reset the - * retry_count. This is not done by IrLAP spec, - * which is strange! - */ - self->retry_count = 0; - self->ack_required = TRUE; - - /* poll bit cleared? */ - if (!info->pf) { - /* Keep state, do not move this line */ - irlap_next_state(self, LAP_NRM_P); - - irlap_data_indication(self, skb, FALSE); - } else { - /* No longer waiting for pf */ - del_timer(&self->final_timer); - - irlap_wait_min_turn_around(self, &self->qos_tx); - - /* Call higher layer *before* changing state - * to give them a chance to send data in the - * next LAP frame. - * Jean II */ - irlap_data_indication(self, skb, FALSE); - - /* XMIT states are the most dangerous state - * to be in, because user requests are - * processed directly and may change state. - * On the other hand, in NDM_P, those - * requests are queued and we will process - * them when we return to irlap_do_event(). - * Jean II - */ - irlap_next_state(self, LAP_XMIT_P); - - /* This is the last frame. - * Make sure it's always called in XMIT state. - * - Jean II */ - irlap_start_poll_timer(self, self->poll_timeout); - } - break; - - } - /* Unexpected next to send (Ns) */ - if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED)) - { - if (!info->pf) { - irlap_update_nr_received(self, info->nr); - - /* - * Wait until the last frame before doing - * anything - */ - - /* Keep state */ - irlap_next_state(self, LAP_NRM_P); - } else { - pr_debug("%s(), missing or duplicate frame!\n", - __func__); - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, CMD_FRAME); - - self->ack_required = FALSE; - - irlap_start_final_timer(self, self->final_timeout); - irlap_next_state(self, LAP_NRM_P); - } - break; - } - /* - * Unexpected next to receive (Nr) - */ - if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED)) - { - if (info->pf) { - self->vr = (self->vr + 1) % 8; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - /* Resend rejected frames */ - irlap_resend_rejected_frames(self, CMD_FRAME); - - self->ack_required = FALSE; - - /* Make sure we account for the time - * to transmit our frames. See comemnts - * in irlap_send_data_primary_poll(). - * Jean II */ - irlap_start_final_timer(self, 2 * self->final_timeout); - - /* Keep state, do not move this line */ - irlap_next_state(self, LAP_NRM_P); - - irlap_data_indication(self, skb, FALSE); - } else { - /* - * Do not resend frames until the last - * frame has arrived from the other - * device. This is not documented in - * IrLAP!! - */ - self->vr = (self->vr + 1) % 8; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - self->ack_required = FALSE; - - /* Keep state, do not move this line!*/ - irlap_next_state(self, LAP_NRM_P); - - irlap_data_indication(self, skb, FALSE); - } - break; - } - /* - * Unexpected next to send (Ns) and next to receive (Nr) - * Not documented by IrLAP! - */ - if ((ns_status == NS_UNEXPECTED) && - (nr_status == NR_UNEXPECTED)) - { - pr_debug("%s(), unexpected nr and ns!\n", - __func__); - if (info->pf) { - /* Resend rejected frames */ - irlap_resend_rejected_frames(self, CMD_FRAME); - - /* Give peer some time to retransmit! - * But account for our own Tx. */ - irlap_start_final_timer(self, 2 * self->final_timeout); - - /* Keep state, do not move this line */ - irlap_next_state(self, LAP_NRM_P); - } else { - /* Update Nr received */ - /* irlap_update_nr_received( info->nr); */ - - self->ack_required = FALSE; - } - break; - } - - /* - * Invalid NR or NS - */ - if ((nr_status == NR_INVALID) || (ns_status == NS_INVALID)) { - if (info->pf) { - del_timer(&self->final_timer); - - irlap_next_state(self, LAP_RESET_WAIT); - - irlap_disconnect_indication(self, LAP_RESET_INDICATION); - self->xmitflag = TRUE; - } else { - del_timer(&self->final_timer); - - irlap_disconnect_indication(self, LAP_RESET_INDICATION); - - self->xmitflag = FALSE; - } - break; - } - pr_debug("%s(), Not implemented!\n", __func__); - pr_debug("%s(), event=%s, ns_status=%d, nr_status=%d\n", - __func__, irlap_event[event], ns_status, nr_status); - break; - case RECV_UI_FRAME: - /* Poll bit cleared? */ - if (!info->pf) { - irlap_data_indication(self, skb, TRUE); - irlap_next_state(self, LAP_NRM_P); - } else { - del_timer(&self->final_timer); - irlap_data_indication(self, skb, TRUE); - irlap_next_state(self, LAP_XMIT_P); - pr_debug("%s: RECV_UI_FRAME: next state %s\n", - __func__, irlap_state[self->state]); - irlap_start_poll_timer(self, self->poll_timeout); - } - break; - case RECV_RR_RSP: - /* - * If you get a RR, the remote isn't busy anymore, - * no matter what the NR - */ - self->remote_busy = FALSE; - - /* Stop final timer */ - del_timer(&self->final_timer); - - /* - * Nr as expected? - */ - ret = irlap_validate_nr_received(self, info->nr); - if (ret == NR_EXPECTED) { - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - /* - * Got expected NR, so reset the retry_count. This - * is not done by the IrLAP standard , which is - * strange! DB. - */ - self->retry_count = 0; - irlap_wait_min_turn_around(self, &self->qos_tx); - - irlap_next_state(self, LAP_XMIT_P); - - /* Start poll timer */ - irlap_start_poll_timer(self, self->poll_timeout); - } else if (ret == NR_UNEXPECTED) { - IRDA_ASSERT(info != NULL, return -1;); - /* - * Unexpected nr! - */ - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - pr_debug("RECV_RR_FRAME: Retrans:%d, nr=%d, va=%d, vs=%d, vr=%d\n", - self->retry_count, info->nr, self->va, - self->vs, self->vr); - - /* Resend rejected frames */ - irlap_resend_rejected_frames(self, CMD_FRAME); - irlap_start_final_timer(self, self->final_timeout * 2); - - irlap_next_state(self, LAP_NRM_P); - } else if (ret == NR_INVALID) { - pr_debug("%s(), Received RR with invalid nr !\n", - __func__); - - irlap_next_state(self, LAP_RESET_WAIT); - - irlap_disconnect_indication(self, LAP_RESET_INDICATION); - self->xmitflag = TRUE; - } - break; - case RECV_RNR_RSP: - IRDA_ASSERT(info != NULL, return -1;); - - /* Stop final timer */ - del_timer(&self->final_timer); - self->remote_busy = TRUE; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - irlap_next_state(self, LAP_XMIT_P); - - /* Start poll timer */ - irlap_start_poll_timer(self, self->poll_timeout); - break; - case RECV_FRMR_RSP: - del_timer(&self->final_timer); - self->xmitflag = TRUE; - irlap_next_state(self, LAP_RESET_WAIT); - irlap_reset_indication(self); - break; - case FINAL_TIMER_EXPIRED: - /* - * We are allowed to wait for additional 300 ms if - * final timer expires when we are in the middle - * of receiving a frame (page 45, IrLAP). Check that - * we only do this once for each frame. - */ - if (irda_device_is_receiving(self->netdev) && !self->add_wait) { - pr_debug("FINAL_TIMER_EXPIRED when receiving a frame! Waiting a little bit more!\n"); - irlap_start_final_timer(self, msecs_to_jiffies(300)); - - /* - * Don't allow this to happen one more time in a row, - * or else we can get a pretty tight loop here if - * if we only receive half a frame. DB. - */ - self->add_wait = TRUE; - break; - } - self->add_wait = FALSE; - - /* N2 is the disconnect timer. Until we reach it, we retry */ - if (self->retry_count < self->N2) { - if (skb_peek(&self->wx_list) == NULL) { - /* Retry sending the pf bit to the secondary */ - pr_debug("nrm_p: resending rr"); - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, CMD_FRAME); - } else { - pr_debug("nrm_p: resend frames"); - irlap_resend_rejected_frames(self, CMD_FRAME); - } - - irlap_start_final_timer(self, self->final_timeout); - self->retry_count++; - pr_debug("irlap_state_nrm_p: FINAL_TIMER_EXPIRED: retry_count=%d\n", - self->retry_count); - - /* Early warning event. I'm using a pretty liberal - * interpretation of the spec and generate an event - * every time the timer is multiple of N1 (and not - * only the first time). This allow application - * to know precisely if connectivity restart... - * Jean II */ - if((self->retry_count % self->N1) == 0) - irlap_status_indication(self, - STATUS_NO_ACTIVITY); - - /* Keep state */ - } else { - irlap_apply_default_connection_parameters(self); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - irlap_disconnect_indication(self, LAP_NO_RESPONSE); - } - break; - case RECV_REJ_RSP: - irlap_update_nr_received(self, info->nr); - if (self->remote_busy) { - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, CMD_FRAME); - } else - irlap_resend_rejected_frames(self, CMD_FRAME); - irlap_start_final_timer(self, 2 * self->final_timeout); - break; - case RECV_SREJ_RSP: - irlap_update_nr_received(self, info->nr); - if (self->remote_busy) { - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, CMD_FRAME); - } else - irlap_resend_rejected_frame(self, CMD_FRAME); - irlap_start_final_timer(self, 2 * self->final_timeout); - break; - case RECV_RD_RSP: - pr_debug("%s(), RECV_RD_RSP\n", __func__); - - irlap_flush_all_queues(self); - irlap_next_state(self, LAP_XMIT_P); - /* Call back the LAP state machine to do a proper disconnect */ - irlap_disconnect_request(self); - break; - default: - pr_debug("%s(), Unknown event %s\n", - __func__, irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_reset_wait (event, skb, info) - * - * We have informed the service user of a reset condition, and is - * awaiting reset of disconnect request. - * - */ -static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - pr_debug("%s(), event = %s\n", __func__, irlap_event[event]); - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case RESET_REQUEST: - if (self->xmitflag) { - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_snrm_frame(self, NULL); - irlap_start_final_timer(self, self->final_timeout); - irlap_next_state(self, LAP_RESET); - } else { - irlap_start_final_timer(self, self->final_timeout); - irlap_next_state(self, LAP_RESET); - } - break; - case DISCONNECT_REQUEST: - irlap_wait_min_turn_around( self, &self->qos_tx); - irlap_send_disc_frame( self); - irlap_flush_all_queues( self); - irlap_start_final_timer( self, self->final_timeout); - self->retry_count = 0; - irlap_next_state( self, LAP_PCLOSE); - break; - default: - pr_debug("%s(), Unknown event %s\n", __func__, - irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_reset (self, event, skb, info) - * - * We have sent a SNRM reset command to the peer layer, and is awaiting - * reply. - * - */ -static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - pr_debug("%s(), event = %s\n", __func__, irlap_event[event]); - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case RECV_DISC_CMD: - del_timer(&self->final_timer); - - irlap_apply_default_connection_parameters(self); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_NO_RESPONSE); - - break; - case RECV_UA_RSP: - del_timer(&self->final_timer); - - /* Initiate connection state */ - irlap_initiate_connection_state(self); - - irlap_reset_confirm(); - - self->remote_busy = FALSE; - - irlap_next_state(self, LAP_XMIT_P); - - irlap_start_poll_timer(self, self->poll_timeout); - - break; - case FINAL_TIMER_EXPIRED: - if (self->retry_count < 3) { - irlap_wait_min_turn_around(self, &self->qos_tx); - - IRDA_ASSERT(self->netdev != NULL, return -1;); - irlap_send_snrm_frame(self, self->qos_dev); - - self->retry_count++; /* Experimental!! */ - - irlap_start_final_timer(self, self->final_timeout); - irlap_next_state(self, LAP_RESET); - } else if (self->retry_count >= self->N3) { - irlap_apply_default_connection_parameters(self); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_disconnect_indication(self, LAP_NO_RESPONSE); - } - break; - case RECV_SNRM_CMD: - /* - * SNRM frame is not allowed to contain an I-field in this - * state - */ - if (!info) { - pr_debug("%s(), RECV_SNRM_CMD\n", __func__); - irlap_initiate_connection_state(self); - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_ua_response_frame(self, &self->qos_rx); - irlap_reset_confirm(); - irlap_start_wd_timer(self, self->wd_timeout); - irlap_next_state(self, LAP_NDM); - } else { - pr_debug("%s(), SNRM frame contained an I field!\n", - __func__); - } - break; - default: - pr_debug("%s(), Unknown event %s\n", - __func__, irlap_event[event]); - - ret = -1; - break; - } - return ret; -} - -/* - * Function irlap_state_xmit_s (event, skb, info) - * - * XMIT_S, The secondary station has been given the right to transmit, - * and we therefore do not expect to receive any transmissions from other - * stations. - */ -static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ret = 0; - - pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); - - IRDA_ASSERT(self != NULL, return -ENODEV;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;); - - switch (event) { - case SEND_I_CMD: - /* - * Send frame only if send window > 0 - */ - if ((self->window > 0) && (!self->remote_busy)) { - int nextfit; -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - struct sk_buff *skb_next; - - /* - * Same deal as in irlap_state_xmit_p(), so see - * the comments at that point. - * We are the secondary, so there are only subtle - * differences. - Jean II - */ - - /* Check if a subsequent skb exist and would fit in - * the current window (with respect to turnaround - * time). - Jean II */ - skb_next = skb_peek(&self->txq); - nextfit = ((skb_next != NULL) && - ((skb_next->len + skb->len) <= - self->bytes_left)); - - /* - * Test if we have transmitted more bytes over the - * link than its possible to do with the current - * speed and turn-around-time. - */ - if((!nextfit) && (skb->len > self->bytes_left)) { - pr_debug("%s(), Not allowed to transmit more bytes!\n", - __func__); - /* Requeue the skb */ - skb_queue_head(&self->txq, skb_get(skb)); - - /* - * Switch to NRM_S, this is only possible - * when we are in secondary mode, since we - * must be sure that we don't miss any RR - * frames - */ - self->window = self->window_size; - self->bytes_left = self->line_capacity; - irlap_start_wd_timer(self, self->wd_timeout); - - irlap_next_state(self, LAP_NRM_S); - /* Slight difference with primary : - * here we would wait for the other side to - * expire the turnaround. - Jean II */ - - return -EPROTO; /* Try again later */ - } - /* Subtract space used by this skb */ - self->bytes_left -= skb->len; -#else /* CONFIG_IRDA_DYNAMIC_WINDOW */ - /* Window has been adjusted for the max packet - * size, so much simpler... - Jean II */ - nextfit = !skb_queue_empty(&self->txq); -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - /* - * Send data with final bit cleared only if window > 1 - * and there is more frames to be sent - */ - if ((self->window > 1) && (nextfit)) { - irlap_send_data_secondary(self, skb); - irlap_next_state(self, LAP_XMIT_S); - } else { - irlap_send_data_secondary_final(self, skb); - irlap_next_state(self, LAP_NRM_S); - - /* - * Make sure state machine does not try to send - * any more frames - */ - ret = -EPROTO; - } - } else { - pr_debug("%s(), Unable to send!\n", __func__); - skb_queue_head(&self->txq, skb_get(skb)); - ret = -EPROTO; - } - break; - case DISCONNECT_REQUEST: - irlap_send_rd_frame(self); - irlap_flush_all_queues(self); - irlap_start_wd_timer(self, self->wd_timeout); - irlap_next_state(self, LAP_SCLOSE); - break; - case DATA_REQUEST: - /* Nothing to do, irlap_do_event() will send the packet - * when we return... - Jean II */ - break; - default: - pr_debug("%s(), Unknown event %s\n", __func__, - irlap_event[event]); - - ret = -EINVAL; - break; - } - return ret; -} - -/* - * Function irlap_state_nrm_s (event, skb, info) - * - * NRM_S (Normal Response Mode as Secondary) state, in this state we are - * expecting to receive frames from the primary station - * - */ -static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - int ns_status; - int nr_status; - int ret = 0; - - pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - switch (event) { - case RECV_I_CMD: /* Optimize for the common case */ - /* FIXME: must check for remote_busy below */ - pr_debug("%s(), event=%s nr=%d, vs=%d, ns=%d, vr=%d, pf=%d\n", - __func__, irlap_event[event], info->nr, - self->vs, info->ns, self->vr, info->pf); - - self->retry_count = 0; - - ns_status = irlap_validate_ns_received(self, info->ns); - nr_status = irlap_validate_nr_received(self, info->nr); - /* - * Check for expected I(nformation) frame - */ - if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) { - - /* Update Vr (next frame for us to receive) */ - self->vr = (self->vr + 1) % 8; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - /* - * poll bit cleared? - */ - if (!info->pf) { - - self->ack_required = TRUE; - - /* - * Starting WD-timer here is optional, but - * not recommended. Note 6 IrLAP p. 83 - */ -#if 0 - irda_start_timer(WD_TIMER, self->wd_timeout); -#endif - /* Keep state, do not move this line */ - irlap_next_state(self, LAP_NRM_S); - - irlap_data_indication(self, skb, FALSE); - break; - } else { - /* - * We should wait before sending RR, and - * also before changing to XMIT_S - * state. (note 1, IrLAP p. 82) - */ - irlap_wait_min_turn_around(self, &self->qos_tx); - - /* - * Give higher layers a chance to - * immediately reply with some data before - * we decide if we should send a RR frame - * or not - */ - irlap_data_indication(self, skb, FALSE); - - /* Any pending data requests? */ - if (!skb_queue_empty(&self->txq) && - (self->window > 0)) - { - self->ack_required = TRUE; - - del_timer(&self->wd_timer); - - irlap_next_state(self, LAP_XMIT_S); - } else { - irlap_send_rr_frame(self, RSP_FRAME); - irlap_start_wd_timer(self, - self->wd_timeout); - - /* Keep the state */ - irlap_next_state(self, LAP_NRM_S); - } - break; - } - } - /* - * Check for Unexpected next to send (Ns) - */ - if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED)) - { - /* Unexpected next to send, with final bit cleared */ - if (!info->pf) { - irlap_update_nr_received(self, info->nr); - - irlap_start_wd_timer(self, self->wd_timeout); - } else { - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, RSP_FRAME); - - irlap_start_wd_timer(self, self->wd_timeout); - } - break; - } - - /* - * Unexpected Next to Receive(NR) ? - */ - if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED)) - { - if (info->pf) { - pr_debug("RECV_I_RSP: frame(s) lost\n"); - - self->vr = (self->vr + 1) % 8; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - /* Resend rejected frames */ - irlap_resend_rejected_frames(self, RSP_FRAME); - - /* Keep state, do not move this line */ - irlap_next_state(self, LAP_NRM_S); - - irlap_data_indication(self, skb, FALSE); - irlap_start_wd_timer(self, self->wd_timeout); - break; - } - /* - * This is not documented in IrLAP!! Unexpected NR - * with poll bit cleared - */ - if (!info->pf) { - self->vr = (self->vr + 1) % 8; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - - /* Keep state, do not move this line */ - irlap_next_state(self, LAP_NRM_S); - - irlap_data_indication(self, skb, FALSE); - irlap_start_wd_timer(self, self->wd_timeout); - } - break; - } - - if (ret == NR_INVALID) { - pr_debug("NRM_S, NR_INVALID not implemented!\n"); - } - if (ret == NS_INVALID) { - pr_debug("NRM_S, NS_INVALID not implemented!\n"); - } - break; - case RECV_UI_FRAME: - /* - * poll bit cleared? - */ - if (!info->pf) { - irlap_data_indication(self, skb, TRUE); - irlap_next_state(self, LAP_NRM_S); /* Keep state */ - } else { - /* - * Any pending data requests? - */ - if (!skb_queue_empty(&self->txq) && - (self->window > 0) && !self->remote_busy) - { - irlap_data_indication(self, skb, TRUE); - - del_timer(&self->wd_timer); - - irlap_next_state(self, LAP_XMIT_S); - } else { - irlap_data_indication(self, skb, TRUE); - - irlap_wait_min_turn_around(self, &self->qos_tx); - - irlap_send_rr_frame(self, RSP_FRAME); - self->ack_required = FALSE; - - irlap_start_wd_timer(self, self->wd_timeout); - - /* Keep the state */ - irlap_next_state(self, LAP_NRM_S); - } - } - break; - case RECV_RR_CMD: - self->retry_count = 0; - - /* - * Nr as expected? - */ - nr_status = irlap_validate_nr_received(self, info->nr); - if (nr_status == NR_EXPECTED) { - if (!skb_queue_empty(&self->txq) && - (self->window > 0)) { - self->remote_busy = FALSE; - - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - del_timer(&self->wd_timer); - - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_next_state(self, LAP_XMIT_S); - } else { - self->remote_busy = FALSE; - /* Update Nr received */ - irlap_update_nr_received(self, info->nr); - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_start_wd_timer(self, self->wd_timeout); - - /* Note : if the link is idle (this case), - * we never go in XMIT_S, so we never get a - * chance to process any DISCONNECT_REQUEST. - * Do it now ! - Jean II */ - if (self->disconnect_pending) { - /* Disconnect */ - irlap_send_rd_frame(self); - irlap_flush_all_queues(self); - - irlap_next_state(self, LAP_SCLOSE); - } else { - /* Just send back pf bit */ - irlap_send_rr_frame(self, RSP_FRAME); - - irlap_next_state(self, LAP_NRM_S); - } - } - } else if (nr_status == NR_UNEXPECTED) { - self->remote_busy = FALSE; - irlap_update_nr_received(self, info->nr); - irlap_resend_rejected_frames(self, RSP_FRAME); - - irlap_start_wd_timer(self, self->wd_timeout); - - /* Keep state */ - irlap_next_state(self, LAP_NRM_S); - } else { - pr_debug("%s(), invalid nr not implemented!\n", - __func__); - } - break; - case RECV_SNRM_CMD: - /* SNRM frame is not allowed to contain an I-field */ - if (!info) { - del_timer(&self->wd_timer); - pr_debug("%s(), received SNRM cmd\n", __func__); - irlap_next_state(self, LAP_RESET_CHECK); - - irlap_reset_indication(self); - } else { - pr_debug("%s(), SNRM frame contained an I-field!\n", - __func__); - - } - break; - case RECV_REJ_CMD: - irlap_update_nr_received(self, info->nr); - if (self->remote_busy) { - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, RSP_FRAME); - } else - irlap_resend_rejected_frames(self, RSP_FRAME); - irlap_start_wd_timer(self, self->wd_timeout); - break; - case RECV_SREJ_CMD: - irlap_update_nr_received(self, info->nr); - if (self->remote_busy) { - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, RSP_FRAME); - } else - irlap_resend_rejected_frame(self, RSP_FRAME); - irlap_start_wd_timer(self, self->wd_timeout); - break; - case WD_TIMER_EXPIRED: - /* - * Wait until retry_count * n matches negotiated threshold/ - * disconnect time (note 2 in IrLAP p. 82) - * - * Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED - * Note : self->wd_timeout = (self->final_timeout * 2), - * which explain why we use (self->N2 / 2) here !!! - * Jean II - */ - pr_debug("%s(), retry_count = %d\n", __func__, - self->retry_count); - - if (self->retry_count < (self->N2 / 2)) { - /* No retry, just wait for primary */ - irlap_start_wd_timer(self, self->wd_timeout); - self->retry_count++; - - if((self->retry_count % (self->N1 / 2)) == 0) - irlap_status_indication(self, - STATUS_NO_ACTIVITY); - } else { - irlap_apply_default_connection_parameters(self); - - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - irlap_disconnect_indication(self, LAP_NO_RESPONSE); - } - break; - case RECV_DISC_CMD: - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - /* Send disconnect response */ - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_ua_response_frame(self, NULL); - - del_timer(&self->wd_timer); - irlap_flush_all_queues(self); - /* Set default link parameters */ - irlap_apply_default_connection_parameters(self); - - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - case RECV_DISCOVERY_XID_CMD: - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rr_frame(self, RSP_FRAME); - self->ack_required = TRUE; - irlap_start_wd_timer(self, self->wd_timeout); - irlap_next_state(self, LAP_NRM_S); - - break; - case RECV_TEST_CMD: - /* Remove test frame header (only LAP header in NRM) */ - skb_pull(skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER); - - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_start_wd_timer(self, self->wd_timeout); - - /* Send response (info will be copied) */ - irlap_send_test_frame(self, self->caddr, info->daddr, skb); - break; - default: - pr_debug("%s(), Unknown event %d, (%s)\n", __func__, - event, irlap_event[event]); - - ret = -EINVAL; - break; - } - return ret; -} - -/* - * Function irlap_state_sclose (self, event, skb, info) - */ -static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, struct irlap_info *info) -{ - IRDA_ASSERT(self != NULL, return -ENODEV;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;); - - switch (event) { - case RECV_DISC_CMD: - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - /* Send disconnect response */ - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_ua_response_frame(self, NULL); - - del_timer(&self->wd_timer); - /* Set default link parameters */ - irlap_apply_default_connection_parameters(self); - - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - case RECV_DM_RSP: - /* IrLAP-1.1 p.82: in SCLOSE, S and I type RSP frames - * shall take us down into default NDM state, like DM_RSP - */ - case RECV_RR_RSP: - case RECV_RNR_RSP: - case RECV_REJ_RSP: - case RECV_SREJ_RSP: - case RECV_I_RSP: - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - del_timer(&self->wd_timer); - irlap_apply_default_connection_parameters(self); - - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - case WD_TIMER_EXPIRED: - /* Always switch state before calling upper layers */ - irlap_next_state(self, LAP_NDM); - - irlap_apply_default_connection_parameters(self); - - irlap_disconnect_indication(self, LAP_DISC_INDICATION); - break; - default: - /* IrLAP-1.1 p.82: in SCLOSE, basically any received frame - * with pf=1 shall restart the wd-timer and resend the rd:rsp - */ - if (info != NULL && info->pf) { - del_timer(&self->wd_timer); - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rd_frame(self); - irlap_start_wd_timer(self, self->wd_timeout); - break; /* stay in SCLOSE */ - } - - pr_debug("%s(), Unknown event %d, (%s)\n", __func__, - event, irlap_event[event]); - - break; - } - - return -1; -} - -static int irlap_state_reset_check( struct irlap_cb *self, IRLAP_EVENT event, - struct sk_buff *skb, - struct irlap_info *info) -{ - int ret = 0; - - pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); - - IRDA_ASSERT(self != NULL, return -ENODEV;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;); - - switch (event) { - case RESET_RESPONSE: - irlap_send_ua_response_frame(self, &self->qos_rx); - irlap_initiate_connection_state(self); - irlap_start_wd_timer(self, WD_TIMEOUT); - irlap_flush_all_queues(self); - - irlap_next_state(self, LAP_NRM_S); - break; - case DISCONNECT_REQUEST: - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_send_rd_frame(self); - irlap_start_wd_timer(self, WD_TIMEOUT); - irlap_next_state(self, LAP_SCLOSE); - break; - default: - pr_debug("%s(), Unknown event %d, (%s)\n", __func__, - event, irlap_event[event]); - - ret = -EINVAL; - break; - } - return ret; -} diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c deleted file mode 100644 index debda3de4726..000000000000 --- a/net/irda/irlap_frame.c +++ /dev/null @@ -1,1407 +0,0 @@ -/********************************************************************* - * - * Filename: irlap_frame.c - * Version: 1.0 - * Description: Build and transmit IrLAP frames - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Tue Aug 19 10:27:26 1997 - * Modified at: Wed Jan 5 08:59:04 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/skbuff.h> -#include <linux/if.h> -#include <linux/if_ether.h> -#include <linux/netdevice.h> -#include <linux/irda.h> -#include <linux/slab.h> - -#include <net/pkt_sched.h> -#include <net/sock.h> - -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/irda_device.h> -#include <net/irda/irlap.h> -#include <net/irda/wrapper.h> -#include <net/irda/timer.h> -#include <net/irda/irlap_frame.h> -#include <net/irda/qos.h> - -static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb, - int command); - -/* - * Function irlap_insert_info (self, skb) - * - * Insert minimum turnaround time and speed information into the skb. We - * need to do this since it's per packet relevant information. Safe to - * have this function inlined since it's only called from one place - */ -static inline void irlap_insert_info(struct irlap_cb *self, - struct sk_buff *skb) -{ - struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb; - - /* - * Insert MTT (min. turn time) and speed into skb, so that the - * device driver knows which settings to use - */ - cb->magic = LAP_MAGIC; - cb->mtt = self->mtt_required; - cb->next_speed = self->speed; - - /* Reset */ - self->mtt_required = 0; - - /* - * Delay equals negotiated BOFs count, plus the number of BOFs to - * force the negotiated minimum turnaround time - */ - cb->xbofs = self->bofs_count; - cb->next_xbofs = self->next_bofs; - cb->xbofs_delay = self->xbofs_delay; - - /* Reset XBOF's delay (used only for getting min turn time) */ - self->xbofs_delay = 0; - /* Put the correct xbofs value for the next packet */ - self->bofs_count = self->next_bofs; -} - -/* - * Function irlap_queue_xmit (self, skb) - * - * A little wrapper for dev_queue_xmit, so we can insert some common - * code into it. - */ -void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb) -{ - /* Some common init stuff */ - skb->dev = self->netdev; - skb_reset_mac_header(skb); - skb_reset_network_header(skb); - skb_reset_transport_header(skb); - skb->protocol = htons(ETH_P_IRDA); - skb->priority = TC_PRIO_BESTEFFORT; - - irlap_insert_info(self, skb); - - if (unlikely(self->mode & IRDA_MODE_MONITOR)) { - pr_debug("%s(): %s is in monitor mode\n", __func__, - self->netdev->name); - dev_kfree_skb(skb); - return; - } - - dev_queue_xmit(skb); -} - -/* - * Function irlap_send_snrm_cmd (void) - * - * Transmits a connect SNRM command frame - */ -void irlap_send_snrm_frame(struct irlap_cb *self, struct qos_info *qos) -{ - struct sk_buff *tx_skb; - struct snrm_frame *frame; - int ret; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Allocate frame */ - tx_skb = alloc_skb(sizeof(struct snrm_frame) + - IRLAP_NEGOCIATION_PARAMS_LEN, - GFP_ATOMIC); - if (!tx_skb) - return; - - frame = skb_put(tx_skb, 2); - - /* Insert connection address field */ - if (qos) - frame->caddr = CMD_FRAME | CBROADCAST; - else - frame->caddr = CMD_FRAME | self->caddr; - - /* Insert control field */ - frame->control = SNRM_CMD | PF_BIT; - - /* - * If we are establishing a connection then insert QoS parameters - */ - if (qos) { - skb_put(tx_skb, 9); /* 25 left */ - frame->saddr = cpu_to_le32(self->saddr); - frame->daddr = cpu_to_le32(self->daddr); - - frame->ncaddr = self->caddr; - - ret = irlap_insert_qos_negotiation_params(self, tx_skb); - if (ret < 0) { - dev_kfree_skb(tx_skb); - return; - } - } - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_recv_snrm_cmd (skb, info) - * - * Received SNRM (Set Normal Response Mode) command frame - * - */ -static void irlap_recv_snrm_cmd(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info) -{ - struct snrm_frame *frame; - - if (pskb_may_pull(skb,sizeof(struct snrm_frame))) { - frame = (struct snrm_frame *) skb->data; - - /* Copy the new connection address ignoring the C/R bit */ - info->caddr = frame->ncaddr & 0xFE; - - /* Check if the new connection address is valid */ - if ((info->caddr == 0x00) || (info->caddr == 0xfe)) { - pr_debug("%s(), invalid connection address!\n", - __func__); - return; - } - - /* Copy peer device address */ - info->daddr = le32_to_cpu(frame->saddr); - info->saddr = le32_to_cpu(frame->daddr); - - /* Only accept if addressed directly to us */ - if (info->saddr != self->saddr) { - pr_debug("%s(), not addressed to us!\n", - __func__); - return; - } - irlap_do_event(self, RECV_SNRM_CMD, skb, info); - } else { - /* Signal that this SNRM frame does not contain and I-field */ - irlap_do_event(self, RECV_SNRM_CMD, skb, NULL); - } -} - -/* - * Function irlap_send_ua_response_frame (qos) - * - * Send UA (Unnumbered Acknowledgement) frame - * - */ -void irlap_send_ua_response_frame(struct irlap_cb *self, struct qos_info *qos) -{ - struct sk_buff *tx_skb; - struct ua_frame *frame; - int ret; - - pr_debug("%s() <%ld>\n", __func__, jiffies); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Allocate frame */ - tx_skb = alloc_skb(sizeof(struct ua_frame) + - IRLAP_NEGOCIATION_PARAMS_LEN, - GFP_ATOMIC); - if (!tx_skb) - return; - - frame = skb_put(tx_skb, 10); - - /* Build UA response */ - frame->caddr = self->caddr; - frame->control = UA_RSP | PF_BIT; - - frame->saddr = cpu_to_le32(self->saddr); - frame->daddr = cpu_to_le32(self->daddr); - - /* Should we send QoS negotiation parameters? */ - if (qos) { - ret = irlap_insert_qos_negotiation_params(self, tx_skb); - if (ret < 0) { - dev_kfree_skb(tx_skb); - return; - } - } - - irlap_queue_xmit(self, tx_skb); -} - - -/* - * Function irlap_send_dm_frame (void) - * - * Send disconnected mode (DM) frame - * - */ -void irlap_send_dm_frame( struct irlap_cb *self) -{ - struct sk_buff *tx_skb = NULL; - struct dm_frame *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - tx_skb = alloc_skb(sizeof(struct dm_frame), GFP_ATOMIC); - if (!tx_skb) - return; - - frame = skb_put(tx_skb, 2); - - if (self->state == LAP_NDM) - frame->caddr = CBROADCAST; - else - frame->caddr = self->caddr; - - frame->control = DM_RSP | PF_BIT; - - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_send_disc_frame (void) - * - * Send disconnect (DISC) frame - * - */ -void irlap_send_disc_frame(struct irlap_cb *self) -{ - struct sk_buff *tx_skb = NULL; - struct disc_frame *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - tx_skb = alloc_skb(sizeof(struct disc_frame), GFP_ATOMIC); - if (!tx_skb) - return; - - frame = skb_put(tx_skb, 2); - - frame->caddr = self->caddr | CMD_FRAME; - frame->control = DISC_CMD | PF_BIT; - - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_send_discovery_xid_frame (S, s, command) - * - * Build and transmit a XID (eXchange station IDentifier) discovery - * frame. - */ -void irlap_send_discovery_xid_frame(struct irlap_cb *self, int S, __u8 s, - __u8 command, discovery_t *discovery) -{ - struct sk_buff *tx_skb = NULL; - struct xid_frame *frame; - __u32 bcast = BROADCAST; - __u8 *info; - - pr_debug("%s(), s=%d, S=%d, command=%d\n", __func__, - s, S, command); - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(discovery != NULL, return;); - - tx_skb = alloc_skb(sizeof(struct xid_frame) + IRLAP_DISCOVERY_INFO_LEN, - GFP_ATOMIC); - if (!tx_skb) - return; - - skb_put(tx_skb, 14); - frame = (struct xid_frame *) tx_skb->data; - - if (command) { - frame->caddr = CBROADCAST | CMD_FRAME; - frame->control = XID_CMD | PF_BIT; - } else { - frame->caddr = CBROADCAST; - frame->control = XID_RSP | PF_BIT; - } - frame->ident = XID_FORMAT; - - frame->saddr = cpu_to_le32(self->saddr); - - if (command) - frame->daddr = cpu_to_le32(bcast); - else - frame->daddr = cpu_to_le32(discovery->data.daddr); - - switch (S) { - case 1: - frame->flags = 0x00; - break; - case 6: - frame->flags = 0x01; - break; - case 8: - frame->flags = 0x02; - break; - case 16: - frame->flags = 0x03; - break; - default: - frame->flags = 0x02; - break; - } - - frame->slotnr = s; - frame->version = 0x00; - - /* - * Provide info for final slot only in commands, and for all - * responses. Send the second byte of the hint only if the - * EXTENSION bit is set in the first byte. - */ - if (!command || (frame->slotnr == 0xff)) { - int len; - - if (discovery->data.hints[0] & HINT_EXTENSION) { - info = skb_put(tx_skb, 2); - info[0] = discovery->data.hints[0]; - info[1] = discovery->data.hints[1]; - } else { - info = skb_put(tx_skb, 1); - info[0] = discovery->data.hints[0]; - } - info = skb_put(tx_skb, 1); - info[0] = discovery->data.charset; - - len = IRDA_MIN(discovery->name_len, skb_tailroom(tx_skb)); - skb_put_data(tx_skb, discovery->data.info, len); - } - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_recv_discovery_xid_rsp (skb, info) - * - * Received a XID discovery response - * - */ -static void irlap_recv_discovery_xid_rsp(struct irlap_cb *self, - struct sk_buff *skb, - struct irlap_info *info) -{ - struct xid_frame *xid; - discovery_t *discovery = NULL; - __u8 *discovery_info; - char *text; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - if (!pskb_may_pull(skb, sizeof(struct xid_frame))) { - net_err_ratelimited("%s: frame too short!\n", __func__); - return; - } - - xid = (struct xid_frame *) skb->data; - - info->daddr = le32_to_cpu(xid->saddr); - info->saddr = le32_to_cpu(xid->daddr); - - /* Make sure frame is addressed to us */ - if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) { - pr_debug("%s(), frame is not addressed to us!\n", - __func__); - return; - } - - if ((discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC)) == NULL) { - net_warn_ratelimited("%s: kmalloc failed!\n", __func__); - return; - } - - discovery->data.daddr = info->daddr; - discovery->data.saddr = self->saddr; - discovery->timestamp = jiffies; - - pr_debug("%s(), daddr=%08x\n", __func__, - discovery->data.daddr); - - discovery_info = skb_pull(skb, sizeof(struct xid_frame)); - - /* Get info returned from peer */ - discovery->data.hints[0] = discovery_info[0]; - if (discovery_info[0] & HINT_EXTENSION) { - pr_debug("EXTENSION\n"); - discovery->data.hints[1] = discovery_info[1]; - discovery->data.charset = discovery_info[2]; - text = (char *) &discovery_info[3]; - } else { - discovery->data.hints[1] = 0; - discovery->data.charset = discovery_info[1]; - text = (char *) &discovery_info[2]; - } - /* - * Terminate info string, should be safe since this is where the - * FCS bytes resides. - */ - skb->data[skb->len] = '\0'; - strncpy(discovery->data.info, text, NICKNAME_MAX_LEN); - discovery->name_len = strlen(discovery->data.info); - - info->discovery = discovery; - - irlap_do_event(self, RECV_DISCOVERY_XID_RSP, skb, info); -} - -/* - * Function irlap_recv_discovery_xid_cmd (skb, info) - * - * Received a XID discovery command - * - */ -static void irlap_recv_discovery_xid_cmd(struct irlap_cb *self, - struct sk_buff *skb, - struct irlap_info *info) -{ - struct xid_frame *xid; - discovery_t *discovery = NULL; - __u8 *discovery_info; - char *text; - - if (!pskb_may_pull(skb, sizeof(struct xid_frame))) { - net_err_ratelimited("%s: frame too short!\n", __func__); - return; - } - - xid = (struct xid_frame *) skb->data; - - info->daddr = le32_to_cpu(xid->saddr); - info->saddr = le32_to_cpu(xid->daddr); - - /* Make sure frame is addressed to us */ - if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) { - pr_debug("%s(), frame is not addressed to us!\n", - __func__); - return; - } - - switch (xid->flags & 0x03) { - case 0x00: - info->S = 1; - break; - case 0x01: - info->S = 6; - break; - case 0x02: - info->S = 8; - break; - case 0x03: - info->S = 16; - break; - default: - /* Error!! */ - return; - } - info->s = xid->slotnr; - - discovery_info = skb_pull(skb, sizeof(struct xid_frame)); - - /* - * Check if last frame - */ - if (info->s == 0xff) { - /* Check if things are sane at this point... */ - if((discovery_info == NULL) || - !pskb_may_pull(skb, 3)) { - net_err_ratelimited("%s: discovery frame too short!\n", - __func__); - return; - } - - /* - * We now have some discovery info to deliver! - */ - discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC); - if (!discovery) - return; - - discovery->data.daddr = info->daddr; - discovery->data.saddr = self->saddr; - discovery->timestamp = jiffies; - - discovery->data.hints[0] = discovery_info[0]; - if (discovery_info[0] & HINT_EXTENSION) { - discovery->data.hints[1] = discovery_info[1]; - discovery->data.charset = discovery_info[2]; - text = (char *) &discovery_info[3]; - } else { - discovery->data.hints[1] = 0; - discovery->data.charset = discovery_info[1]; - text = (char *) &discovery_info[2]; - } - /* - * Terminate string, should be safe since this is where the - * FCS bytes resides. - */ - skb->data[skb->len] = '\0'; - strncpy(discovery->data.info, text, NICKNAME_MAX_LEN); - discovery->name_len = strlen(discovery->data.info); - - info->discovery = discovery; - } else - info->discovery = NULL; - - irlap_do_event(self, RECV_DISCOVERY_XID_CMD, skb, info); -} - -/* - * Function irlap_send_rr_frame (self, command) - * - * Build and transmit RR (Receive Ready) frame. Notice that it is currently - * only possible to send RR frames with the poll bit set. - */ -void irlap_send_rr_frame(struct irlap_cb *self, int command) -{ - struct sk_buff *tx_skb; - struct rr_frame *frame; - - tx_skb = alloc_skb(sizeof(struct rr_frame), GFP_ATOMIC); - if (!tx_skb) - return; - - frame = skb_put(tx_skb, 2); - - frame->caddr = self->caddr; - frame->caddr |= (command) ? CMD_FRAME : 0; - - frame->control = RR | PF_BIT | (self->vr << 5); - - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_send_rd_frame (self) - * - * Request disconnect. Used by a secondary station to request the - * disconnection of the link. - */ -void irlap_send_rd_frame(struct irlap_cb *self) -{ - struct sk_buff *tx_skb; - struct rd_frame *frame; - - tx_skb = alloc_skb(sizeof(struct rd_frame), GFP_ATOMIC); - if (!tx_skb) - return; - - frame = skb_put(tx_skb, 2); - - frame->caddr = self->caddr; - frame->control = RD_RSP | PF_BIT; - - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_recv_rr_frame (skb, info) - * - * Received RR (Receive Ready) frame from peer station, no harm in - * making it inline since its called only from one single place - * (irlap_driver_rcv). - */ -static inline void irlap_recv_rr_frame(struct irlap_cb *self, - struct sk_buff *skb, - struct irlap_info *info, int command) -{ - info->nr = skb->data[1] >> 5; - - /* Check if this is a command or a response frame */ - if (command) - irlap_do_event(self, RECV_RR_CMD, skb, info); - else - irlap_do_event(self, RECV_RR_RSP, skb, info); -} - -/* - * Function irlap_recv_rnr_frame (self, skb, info) - * - * Received RNR (Receive Not Ready) frame from peer station - * - */ -static void irlap_recv_rnr_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info, int command) -{ - info->nr = skb->data[1] >> 5; - - pr_debug("%s(), nr=%d, %ld\n", __func__, info->nr, jiffies); - - if (command) - irlap_do_event(self, RECV_RNR_CMD, skb, info); - else - irlap_do_event(self, RECV_RNR_RSP, skb, info); -} - -static void irlap_recv_rej_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info, int command) -{ - info->nr = skb->data[1] >> 5; - - /* Check if this is a command or a response frame */ - if (command) - irlap_do_event(self, RECV_REJ_CMD, skb, info); - else - irlap_do_event(self, RECV_REJ_RSP, skb, info); -} - -static void irlap_recv_srej_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info, int command) -{ - info->nr = skb->data[1] >> 5; - - /* Check if this is a command or a response frame */ - if (command) - irlap_do_event(self, RECV_SREJ_CMD, skb, info); - else - irlap_do_event(self, RECV_SREJ_RSP, skb, info); -} - -static void irlap_recv_disc_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info, int command) -{ - /* Check if this is a command or a response frame */ - if (command) - irlap_do_event(self, RECV_DISC_CMD, skb, info); - else - irlap_do_event(self, RECV_RD_RSP, skb, info); -} - -/* - * Function irlap_recv_ua_frame (skb, frame) - * - * Received UA (Unnumbered Acknowledgement) frame - * - */ -static inline void irlap_recv_ua_frame(struct irlap_cb *self, - struct sk_buff *skb, - struct irlap_info *info) -{ - irlap_do_event(self, RECV_UA_RSP, skb, info); -} - -/* - * Function irlap_send_data_primary(self, skb) - * - * Send I-frames as the primary station but without the poll bit set - * - */ -void irlap_send_data_primary(struct irlap_cb *self, struct sk_buff *skb) -{ - struct sk_buff *tx_skb; - - if (skb->data[1] == I_FRAME) { - - /* - * Insert frame sequence number (Vs) in control field before - * inserting into transmit window queue. - */ - skb->data[1] = I_FRAME | (self->vs << 1); - - /* - * Insert frame in store, in case of retransmissions - * Increase skb reference count, see irlap_do_event() - */ - skb_get(skb); - skb_queue_tail(&self->wx_list, skb); - - /* Copy buffer */ - tx_skb = skb_clone(skb, GFP_ATOMIC); - if (tx_skb == NULL) { - return; - } - - self->vs = (self->vs + 1) % 8; - self->ack_required = FALSE; - self->window -= 1; - - irlap_send_i_frame( self, tx_skb, CMD_FRAME); - } else { - pr_debug("%s(), sending unreliable frame\n", __func__); - irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME); - self->window -= 1; - } -} -/* - * Function irlap_send_data_primary_poll (self, skb) - * - * Send I(nformation) frame as primary with poll bit set - */ -void irlap_send_data_primary_poll(struct irlap_cb *self, struct sk_buff *skb) -{ - struct sk_buff *tx_skb; - int transmission_time; - - /* Stop P timer */ - del_timer(&self->poll_timer); - - /* Is this reliable or unreliable data? */ - if (skb->data[1] == I_FRAME) { - - /* - * Insert frame sequence number (Vs) in control field before - * inserting into transmit window queue. - */ - skb->data[1] = I_FRAME | (self->vs << 1); - - /* - * Insert frame in store, in case of retransmissions - * Increase skb reference count, see irlap_do_event() - */ - skb_get(skb); - skb_queue_tail(&self->wx_list, skb); - - /* Copy buffer */ - tx_skb = skb_clone(skb, GFP_ATOMIC); - if (tx_skb == NULL) { - return; - } - - /* - * Set poll bit if necessary. We do this to the copied - * skb, since retransmitted need to set or clear the poll - * bit depending on when they are sent. - */ - tx_skb->data[1] |= PF_BIT; - - self->vs = (self->vs + 1) % 8; - self->ack_required = FALSE; - - irlap_next_state(self, LAP_NRM_P); - irlap_send_i_frame(self, tx_skb, CMD_FRAME); - } else { - pr_debug("%s(), sending unreliable frame\n", __func__); - - if (self->ack_required) { - irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME); - irlap_next_state(self, LAP_NRM_P); - irlap_send_rr_frame(self, CMD_FRAME); - self->ack_required = FALSE; - } else { - skb->data[1] |= PF_BIT; - irlap_next_state(self, LAP_NRM_P); - irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME); - } - } - - /* How much time we took for transmission of all frames. - * We don't know, so let assume we used the full window. Jean II */ - transmission_time = self->final_timeout; - - /* Reset parameter so that we can fill next window */ - self->window = self->window_size; - -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - /* Remove what we have not used. Just do a prorata of the - * bytes left in window to window capacity. - * See max_line_capacities[][] in qos.c for details. Jean II */ - transmission_time -= (self->final_timeout * self->bytes_left - / self->line_capacity); - pr_debug("%s() adjusting transmission_time : ft=%d, bl=%d, lc=%d -> tt=%d\n", - __func__, self->final_timeout, self->bytes_left, - self->line_capacity, transmission_time); - - /* We are allowed to transmit a maximum number of bytes again. */ - self->bytes_left = self->line_capacity; -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - - /* - * The network layer has a intermediate buffer between IrLAP - * and the IrDA driver which can contain 8 frames. So, even - * though IrLAP is currently sending the *last* frame of the - * tx-window, the driver most likely has only just started - * sending the *first* frame of the same tx-window. - * I.e. we are always at the very beginning of or Tx window. - * Now, we are supposed to set the final timer from the end - * of our tx-window to let the other peer reply. So, we need - * to add extra time to compensate for the fact that we - * are really at the start of tx-window, otherwise the final timer - * might expire before he can answer... - * Jean II - */ - irlap_start_final_timer(self, self->final_timeout + transmission_time); - - /* - * The clever amongst you might ask why we do this adjustement - * only here, and not in all the other cases in irlap_event.c. - * In all those other case, we only send a very short management - * frame (few bytes), so the adjustement would be lost in the - * noise... - * The exception of course is irlap_resend_rejected_frame(). - * Jean II */ -} - -/* - * Function irlap_send_data_secondary_final (self, skb) - * - * Send I(nformation) frame as secondary with final bit set - * - */ -void irlap_send_data_secondary_final(struct irlap_cb *self, - struct sk_buff *skb) -{ - struct sk_buff *tx_skb = NULL; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* Is this reliable or unreliable data? */ - if (skb->data[1] == I_FRAME) { - - /* - * Insert frame sequence number (Vs) in control field before - * inserting into transmit window queue. - */ - skb->data[1] = I_FRAME | (self->vs << 1); - - /* - * Insert frame in store, in case of retransmissions - * Increase skb reference count, see irlap_do_event() - */ - skb_get(skb); - skb_queue_tail(&self->wx_list, skb); - - tx_skb = skb_clone(skb, GFP_ATOMIC); - if (tx_skb == NULL) { - return; - } - - tx_skb->data[1] |= PF_BIT; - - self->vs = (self->vs + 1) % 8; - self->ack_required = FALSE; - - irlap_send_i_frame(self, tx_skb, RSP_FRAME); - } else { - if (self->ack_required) { - irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME); - irlap_send_rr_frame(self, RSP_FRAME); - self->ack_required = FALSE; - } else { - skb->data[1] |= PF_BIT; - irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME); - } - } - - self->window = self->window_size; -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - /* We are allowed to transmit a maximum number of bytes again. */ - self->bytes_left = self->line_capacity; -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - - irlap_start_wd_timer(self, self->wd_timeout); -} - -/* - * Function irlap_send_data_secondary (self, skb) - * - * Send I(nformation) frame as secondary without final bit set - * - */ -void irlap_send_data_secondary(struct irlap_cb *self, struct sk_buff *skb) -{ - struct sk_buff *tx_skb = NULL; - - /* Is this reliable or unreliable data? */ - if (skb->data[1] == I_FRAME) { - - /* - * Insert frame sequence number (Vs) in control field before - * inserting into transmit window queue. - */ - skb->data[1] = I_FRAME | (self->vs << 1); - - /* - * Insert frame in store, in case of retransmissions - * Increase skb reference count, see irlap_do_event() - */ - skb_get(skb); - skb_queue_tail(&self->wx_list, skb); - - tx_skb = skb_clone(skb, GFP_ATOMIC); - if (tx_skb == NULL) { - return; - } - - self->vs = (self->vs + 1) % 8; - self->ack_required = FALSE; - self->window -= 1; - - irlap_send_i_frame(self, tx_skb, RSP_FRAME); - } else { - irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME); - self->window -= 1; - } -} - -/* - * Function irlap_resend_rejected_frames (nr) - * - * Resend frames which has not been acknowledged. Should be safe to - * traverse the list without locking it since this function will only be - * called from interrupt context (BH) - */ -void irlap_resend_rejected_frames(struct irlap_cb *self, int command) -{ - struct sk_buff *tx_skb; - struct sk_buff *skb; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Resend unacknowledged frame(s) */ - skb_queue_walk(&self->wx_list, skb) { - irlap_wait_min_turn_around(self, &self->qos_tx); - - /* We copy the skb to be retransmitted since we will have to - * modify it. Cloning will confuse packet sniffers - */ - /* tx_skb = skb_clone( skb, GFP_ATOMIC); */ - tx_skb = skb_copy(skb, GFP_ATOMIC); - if (!tx_skb) { - pr_debug("%s(), unable to copy\n", __func__); - return; - } - - /* Clear old Nr field + poll bit */ - tx_skb->data[1] &= 0x0f; - - /* - * Set poll bit on the last frame retransmitted - */ - if (skb_queue_is_last(&self->wx_list, skb)) - tx_skb->data[1] |= PF_BIT; /* Set p/f bit */ - else - tx_skb->data[1] &= ~PF_BIT; /* Clear p/f bit */ - - irlap_send_i_frame(self, tx_skb, command); - } -#if 0 /* Not yet */ - /* - * We can now fill the window with additional data frames - */ - while (!skb_queue_empty(&self->txq)) { - - pr_debug("%s(), sending additional frames!\n", __func__); - if (self->window > 0) { - skb = skb_dequeue( &self->txq); - IRDA_ASSERT(skb != NULL, return;); - - /* - * If send window > 1 then send frame with pf - * bit cleared - */ - if ((self->window > 1) && - !skb_queue_empty(&self->txq)) { - irlap_send_data_primary(self, skb); - } else { - irlap_send_data_primary_poll(self, skb); - } - kfree_skb(skb); - } - } -#endif -} - -void irlap_resend_rejected_frame(struct irlap_cb *self, int command) -{ - struct sk_buff *tx_skb; - struct sk_buff *skb; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - /* Resend unacknowledged frame(s) */ - skb = skb_peek(&self->wx_list); - if (skb != NULL) { - irlap_wait_min_turn_around(self, &self->qos_tx); - - /* We copy the skb to be retransmitted since we will have to - * modify it. Cloning will confuse packet sniffers - */ - /* tx_skb = skb_clone( skb, GFP_ATOMIC); */ - tx_skb = skb_copy(skb, GFP_ATOMIC); - if (!tx_skb) { - pr_debug("%s(), unable to copy\n", __func__); - return; - } - - /* Clear old Nr field + poll bit */ - tx_skb->data[1] &= 0x0f; - - /* Set poll/final bit */ - tx_skb->data[1] |= PF_BIT; /* Set p/f bit */ - - irlap_send_i_frame(self, tx_skb, command); - } -} - -/* - * Function irlap_send_ui_frame (self, skb, command) - * - * Contruct and transmit an Unnumbered Information (UI) frame - * - */ -void irlap_send_ui_frame(struct irlap_cb *self, struct sk_buff *skb, - __u8 caddr, int command) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* Insert connection address */ - skb->data[0] = caddr | ((command) ? CMD_FRAME : 0); - - irlap_queue_xmit(self, skb); -} - -/* - * Function irlap_send_i_frame (skb) - * - * Contruct and transmit Information (I) frame - */ -static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb, - int command) -{ - /* Insert connection address */ - skb->data[0] = self->caddr; - skb->data[0] |= (command) ? CMD_FRAME : 0; - - /* Insert next to receive (Vr) */ - skb->data[1] |= (self->vr << 5); /* insert nr */ - - irlap_queue_xmit(self, skb); -} - -/* - * Function irlap_recv_i_frame (skb, frame) - * - * Receive and parse an I (Information) frame, no harm in making it inline - * since it's called only from one single place (irlap_driver_rcv). - */ -static inline void irlap_recv_i_frame(struct irlap_cb *self, - struct sk_buff *skb, - struct irlap_info *info, int command) -{ - info->nr = skb->data[1] >> 5; /* Next to receive */ - info->pf = skb->data[1] & PF_BIT; /* Final bit */ - info->ns = (skb->data[1] >> 1) & 0x07; /* Next to send */ - - /* Check if this is a command or a response frame */ - if (command) - irlap_do_event(self, RECV_I_CMD, skb, info); - else - irlap_do_event(self, RECV_I_RSP, skb, info); -} - -/* - * Function irlap_recv_ui_frame (self, skb, info) - * - * Receive and parse an Unnumbered Information (UI) frame - * - */ -static void irlap_recv_ui_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info) -{ - info->pf = skb->data[1] & PF_BIT; /* Final bit */ - - irlap_do_event(self, RECV_UI_FRAME, skb, info); -} - -/* - * Function irlap_recv_frmr_frame (skb, frame) - * - * Received Frame Reject response. - * - */ -static void irlap_recv_frmr_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info) -{ - __u8 *frame; - int w, x, y, z; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(info != NULL, return;); - - if (!pskb_may_pull(skb, 4)) { - net_err_ratelimited("%s: frame too short!\n", __func__); - return; - } - - frame = skb->data; - - info->nr = frame[2] >> 5; /* Next to receive */ - info->pf = frame[2] & PF_BIT; /* Final bit */ - info->ns = (frame[2] >> 1) & 0x07; /* Next to send */ - - w = frame[3] & 0x01; - x = frame[3] & 0x02; - y = frame[3] & 0x04; - z = frame[3] & 0x08; - - if (w) { - pr_debug("Rejected control field is undefined or not implemented\n"); - } - if (x) { - pr_debug("Rejected control field was invalid because it contained a non permitted I field\n"); - } - if (y) { - pr_debug("Received I field exceeded the maximum negotiated for the existing connection or exceeded the maximum this station supports if no connection exists\n"); - } - if (z) { - pr_debug("Rejected control field control field contained an invalid Nr count\n"); - } - irlap_do_event(self, RECV_FRMR_RSP, skb, info); -} - -/* - * Function irlap_send_test_frame (self, daddr) - * - * Send a test frame response - * - */ -void irlap_send_test_frame(struct irlap_cb *self, __u8 caddr, __u32 daddr, - struct sk_buff *cmd) -{ - struct sk_buff *tx_skb; - struct test_frame *frame; - - tx_skb = alloc_skb(cmd->len + sizeof(struct test_frame), GFP_ATOMIC); - if (!tx_skb) - return; - - /* Broadcast frames must include saddr and daddr fields */ - if (caddr == CBROADCAST) { - frame = skb_put(tx_skb, sizeof(struct test_frame)); - - /* Insert the swapped addresses */ - frame->saddr = cpu_to_le32(self->saddr); - frame->daddr = cpu_to_le32(daddr); - } else - frame = skb_put(tx_skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER); - - frame->caddr = caddr; - frame->control = TEST_RSP | PF_BIT; - - /* Copy info */ - skb_put_data(tx_skb, cmd->data, cmd->len); - - /* Return to sender */ - irlap_wait_min_turn_around(self, &self->qos_tx); - irlap_queue_xmit(self, tx_skb); -} - -/* - * Function irlap_recv_test_frame (self, skb) - * - * Receive a test frame - * - */ -static void irlap_recv_test_frame(struct irlap_cb *self, struct sk_buff *skb, - struct irlap_info *info, int command) -{ - struct test_frame *frame; - - if (!pskb_may_pull(skb, sizeof(*frame))) { - net_err_ratelimited("%s: frame too short!\n", __func__); - return; - } - frame = (struct test_frame *) skb->data; - - /* Broadcast frames must carry saddr and daddr fields */ - if (info->caddr == CBROADCAST) { - if (skb->len < sizeof(struct test_frame)) { - pr_debug("%s() test frame too short!\n", - __func__); - return; - } - - /* Read and swap addresses */ - info->daddr = le32_to_cpu(frame->saddr); - info->saddr = le32_to_cpu(frame->daddr); - - /* Make sure frame is addressed to us */ - if ((info->saddr != self->saddr) && - (info->saddr != BROADCAST)) { - return; - } - } - - if (command) - irlap_do_event(self, RECV_TEST_CMD, skb, info); - else - irlap_do_event(self, RECV_TEST_RSP, skb, info); -} - -/* - * Function irlap_driver_rcv (skb, netdev, ptype) - * - * Called when a frame is received. Dispatches the right receive function - * for processing of the frame. - * - * Note on skb management : - * After calling the higher layers of the IrDA stack, we always - * kfree() the skb, which drop the reference count (and potentially - * destroy it). - * If a higher layer of the stack want to keep the skb around (to put - * in a queue or pass it to the higher layer), it will need to use - * skb_get() to keep a reference on it. This is usually done at the - * LMP level in irlmp.c. - * Jean II - */ -int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev, - struct packet_type *ptype, struct net_device *orig_dev) -{ - struct irlap_info info; - struct irlap_cb *self; - int command; - __u8 control; - int ret = -1; - - if (!net_eq(dev_net(dev), &init_net)) - goto out; - - /* FIXME: should we get our own field? */ - self = (struct irlap_cb *) dev->atalk_ptr; - - /* If the net device is down, then IrLAP is gone! */ - if (!self || self->magic != LAP_MAGIC) - goto err; - - /* We are no longer an "old" protocol, so we need to handle - * share and non linear skbs. This should never happen, so - * we don't need to be clever about it. Jean II */ - if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { - net_err_ratelimited("%s: can't clone shared skb!\n", __func__); - goto err; - } - - /* Check if frame is large enough for parsing */ - if (!pskb_may_pull(skb, 2)) { - net_err_ratelimited("%s: frame too short!\n", __func__); - goto err; - } - - command = skb->data[0] & CMD_FRAME; - info.caddr = skb->data[0] & CBROADCAST; - - info.pf = skb->data[1] & PF_BIT; - info.control = skb->data[1] & ~PF_BIT; /* Mask away poll/final bit */ - - control = info.control; - - /* First we check if this frame has a valid connection address */ - if ((info.caddr != self->caddr) && (info.caddr != CBROADCAST)) { - pr_debug("%s(), wrong connection address!\n", - __func__); - goto out; - } - /* - * Optimize for the common case and check if the frame is an - * I(nformation) frame. Only I-frames have bit 0 set to 0 - */ - if (~control & 0x01) { - irlap_recv_i_frame(self, skb, &info, command); - goto out; - } - /* - * We now check is the frame is an S(upervisory) frame. Only - * S-frames have bit 0 set to 1 and bit 1 set to 0 - */ - if (~control & 0x02) { - /* - * Received S(upervisory) frame, check which frame type it is - * only the first nibble is of interest - */ - switch (control & 0x0f) { - case RR: - irlap_recv_rr_frame(self, skb, &info, command); - break; - case RNR: - irlap_recv_rnr_frame(self, skb, &info, command); - break; - case REJ: - irlap_recv_rej_frame(self, skb, &info, command); - break; - case SREJ: - irlap_recv_srej_frame(self, skb, &info, command); - break; - default: - net_warn_ratelimited("%s: Unknown S-frame %02x received!\n", - __func__, info.control); - break; - } - goto out; - } - /* - * This must be a C(ontrol) frame - */ - switch (control) { - case XID_RSP: - irlap_recv_discovery_xid_rsp(self, skb, &info); - break; - case XID_CMD: - irlap_recv_discovery_xid_cmd(self, skb, &info); - break; - case SNRM_CMD: - irlap_recv_snrm_cmd(self, skb, &info); - break; - case DM_RSP: - irlap_do_event(self, RECV_DM_RSP, skb, &info); - break; - case DISC_CMD: /* And RD_RSP since they have the same value */ - irlap_recv_disc_frame(self, skb, &info, command); - break; - case TEST_CMD: - irlap_recv_test_frame(self, skb, &info, command); - break; - case UA_RSP: - irlap_recv_ua_frame(self, skb, &info); - break; - case FRMR_RSP: - irlap_recv_frmr_frame(self, skb, &info); - break; - case UI_FRAME: - irlap_recv_ui_frame(self, skb, &info); - break; - default: - net_warn_ratelimited("%s: Unknown frame %02x received!\n", - __func__, info.control); - break; - } -out: - ret = 0; -err: - /* Always drop our reference on the skb */ - dev_kfree_skb(skb); - return ret; -} diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c deleted file mode 100644 index 43964594aa12..000000000000 --- a/net/irda/irlmp.c +++ /dev/null @@ -1,1996 +0,0 @@ -/********************************************************************* - * - * Filename: irlmp.c - * Version: 1.0 - * Description: IrDA Link Management Protocol (LMP) layer - * Status: Stable. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 17 20:54:32 1997 - * Modified at: Wed Jan 5 11:26:03 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/skbuff.h> -#include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/init.h> -#include <linux/kmod.h> -#include <linux/random.h> -#include <linux/seq_file.h> - -#include <net/irda/irda.h> -#include <net/irda/timer.h> -#include <net/irda/qos.h> -#include <net/irda/irlap.h> -#include <net/irda/iriap.h> -#include <net/irda/irlmp.h> -#include <net/irda/irlmp_frame.h> - -#include <asm/unaligned.h> - -static __u8 irlmp_find_free_slsap(void); -static int irlmp_slsap_inuse(__u8 slsap_sel); - -/* Master structure */ -struct irlmp_cb *irlmp = NULL; - -/* These can be altered by the sysctl interface */ -int sysctl_discovery = 0; -int sysctl_discovery_timeout = 3; /* 3 seconds by default */ -int sysctl_discovery_slots = 6; /* 6 slots by default */ -int sysctl_lap_keepalive_time = LM_IDLE_TIMEOUT * 1000 / HZ; -char sysctl_devname[65]; - -static const char *irlmp_reasons[] = { - "ERROR, NOT USED", - "LM_USER_REQUEST", - "LM_LAP_DISCONNECT", - "LM_CONNECT_FAILURE", - "LM_LAP_RESET", - "LM_INIT_DISCONNECT", - "ERROR, NOT USED", - "UNKNOWN", -}; - -const char *irlmp_reason_str(LM_REASON reason) -{ - reason = min_t(size_t, reason, ARRAY_SIZE(irlmp_reasons) - 1); - return irlmp_reasons[reason]; -} - -/* - * Function irlmp_init (void) - * - * Create (allocate) the main IrLMP structure - * - */ -int __init irlmp_init(void) -{ - /* Initialize the irlmp structure. */ - irlmp = kzalloc( sizeof(struct irlmp_cb), GFP_KERNEL); - if (irlmp == NULL) - return -ENOMEM; - - irlmp->magic = LMP_MAGIC; - - irlmp->clients = hashbin_new(HB_LOCK); - irlmp->services = hashbin_new(HB_LOCK); - irlmp->links = hashbin_new(HB_LOCK); - irlmp->unconnected_lsaps = hashbin_new(HB_LOCK); - irlmp->cachelog = hashbin_new(HB_NOLOCK); - - if ((irlmp->clients == NULL) || - (irlmp->services == NULL) || - (irlmp->links == NULL) || - (irlmp->unconnected_lsaps == NULL) || - (irlmp->cachelog == NULL)) { - return -ENOMEM; - } - - spin_lock_init(&irlmp->cachelog->hb_spinlock); - - irlmp->last_lsap_sel = 0x0f; /* Reserved 0x00-0x0f */ - strcpy(sysctl_devname, "Linux"); - - init_timer(&irlmp->discovery_timer); - - /* Do discovery every 3 seconds, conditionally */ - if (sysctl_discovery) - irlmp_start_discovery_timer(irlmp, - sysctl_discovery_timeout*HZ); - - return 0; -} - -/* - * Function irlmp_cleanup (void) - * - * Remove IrLMP layer - * - */ -void irlmp_cleanup(void) -{ - /* Check for main structure */ - IRDA_ASSERT(irlmp != NULL, return;); - IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;); - - del_timer(&irlmp->discovery_timer); - - hashbin_delete(irlmp->links, (FREE_FUNC) kfree); - hashbin_delete(irlmp->unconnected_lsaps, (FREE_FUNC) kfree); - hashbin_delete(irlmp->clients, (FREE_FUNC) kfree); - hashbin_delete(irlmp->services, (FREE_FUNC) kfree); - hashbin_delete(irlmp->cachelog, (FREE_FUNC) kfree); - - /* De-allocate main structure */ - kfree(irlmp); - irlmp = NULL; -} - -/* - * Function irlmp_open_lsap (slsap, notify) - * - * Register with IrLMP and create a local LSAP, - * returns handle to LSAP. - */ -struct lsap_cb *irlmp_open_lsap(__u8 slsap_sel, notify_t *notify, __u8 pid) -{ - struct lsap_cb *self; - - IRDA_ASSERT(notify != NULL, return NULL;); - IRDA_ASSERT(irlmp != NULL, return NULL;); - IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return NULL;); - IRDA_ASSERT(notify->instance != NULL, return NULL;); - - /* Does the client care which Source LSAP selector it gets? */ - if (slsap_sel == LSAP_ANY) { - slsap_sel = irlmp_find_free_slsap(); - if (!slsap_sel) - return NULL; - } else if (irlmp_slsap_inuse(slsap_sel)) - return NULL; - - /* Allocate new instance of a LSAP connection */ - self = kzalloc(sizeof(struct lsap_cb), GFP_ATOMIC); - if (self == NULL) - return NULL; - - self->magic = LMP_LSAP_MAGIC; - self->slsap_sel = slsap_sel; - - /* Fix connectionless LSAP's */ - if (slsap_sel == LSAP_CONNLESS) { -#ifdef CONFIG_IRDA_ULTRA - self->dlsap_sel = LSAP_CONNLESS; - self->pid = pid; -#endif /* CONFIG_IRDA_ULTRA */ - } else - self->dlsap_sel = LSAP_ANY; - /* self->connected = FALSE; -> already NULL via memset() */ - - init_timer(&self->watchdog_timer); - - self->notify = *notify; - - self->lsap_state = LSAP_DISCONNECTED; - - /* Insert into queue of unconnected LSAPs */ - hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self, - (long) self, NULL); - - return self; -} -EXPORT_SYMBOL(irlmp_open_lsap); - -/* - * Function __irlmp_close_lsap (self) - * - * Remove an instance of LSAP - */ -static void __irlmp_close_lsap(struct lsap_cb *self) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - - /* - * Set some of the variables to preset values - */ - self->magic = 0; - del_timer(&self->watchdog_timer); /* Important! */ - - if (self->conn_skb) - dev_kfree_skb(self->conn_skb); - - kfree(self); -} - -/* - * Function irlmp_close_lsap (self) - * - * Close and remove LSAP - * - */ -void irlmp_close_lsap(struct lsap_cb *self) -{ - struct lap_cb *lap; - struct lsap_cb *lsap = NULL; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - - /* - * Find out if we should remove this LSAP from a link or from the - * list of unconnected lsaps (not associated with a link) - */ - lap = self->lap; - if (lap) { - IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); - /* We might close a LSAP before it has completed the - * connection setup. In those case, higher layers won't - * send a proper disconnect request. Harmless, except - * that we will forget to close LAP... - Jean II */ - if(self->lsap_state != LSAP_DISCONNECTED) { - self->lsap_state = LSAP_DISCONNECTED; - irlmp_do_lap_event(self->lap, - LM_LAP_DISCONNECT_REQUEST, NULL); - } - /* Now, remove from the link */ - lsap = hashbin_remove(lap->lsaps, (long) self, NULL); -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - lap->cache.valid = FALSE; -#endif - } - self->lap = NULL; - /* Check if we found the LSAP! If not then try the unconnected lsaps */ - if (!lsap) { - lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, - NULL); - } - if (!lsap) { - pr_debug("%s(), Looks like somebody has removed me already!\n", - __func__); - return; - } - __irlmp_close_lsap(self); -} -EXPORT_SYMBOL(irlmp_close_lsap); - -/* - * Function irlmp_register_irlap (saddr, notify) - * - * Register IrLAP layer with IrLMP. There is possible to have multiple - * instances of the IrLAP layer, each connected to different IrDA ports - * - */ -void irlmp_register_link(struct irlap_cb *irlap, __u32 saddr, notify_t *notify) -{ - struct lap_cb *lap; - - IRDA_ASSERT(irlmp != NULL, return;); - IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;); - IRDA_ASSERT(notify != NULL, return;); - - /* - * Allocate new instance of a LSAP connection - */ - lap = kzalloc(sizeof(struct lap_cb), GFP_KERNEL); - if (lap == NULL) - return; - - lap->irlap = irlap; - lap->magic = LMP_LAP_MAGIC; - lap->saddr = saddr; - lap->daddr = DEV_ADDR_ANY; -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - lap->cache.valid = FALSE; -#endif - lap->lsaps = hashbin_new(HB_LOCK); - if (lap->lsaps == NULL) { - net_warn_ratelimited("%s(), unable to kmalloc lsaps\n", - __func__); - kfree(lap); - return; - } - - lap->lap_state = LAP_STANDBY; - - init_timer(&lap->idle_timer); - - /* - * Insert into queue of LMP links - */ - hashbin_insert(irlmp->links, (irda_queue_t *) lap, lap->saddr, NULL); - - /* - * We set only this variable so IrLAP can tell us on which link the - * different events happened on - */ - irda_notify_init(notify); - notify->instance = lap; -} - -/* - * Function irlmp_unregister_irlap (saddr) - * - * IrLAP layer has been removed! - * - */ -void irlmp_unregister_link(__u32 saddr) -{ - struct lap_cb *link; - - /* We must remove ourselves from the hashbin *first*. This ensure - * that no more LSAPs will be open on this link and no discovery - * will be triggered anymore. Jean II */ - link = hashbin_remove(irlmp->links, saddr, NULL); - if (link) { - IRDA_ASSERT(link->magic == LMP_LAP_MAGIC, return;); - - /* Kill all the LSAPs on this link. Jean II */ - link->reason = LAP_DISC_INDICATION; - link->daddr = DEV_ADDR_ANY; - irlmp_do_lap_event(link, LM_LAP_DISCONNECT_INDICATION, NULL); - - /* Remove all discoveries discovered at this link */ - irlmp_expire_discoveries(irlmp->cachelog, link->saddr, TRUE); - - /* Final cleanup */ - del_timer(&link->idle_timer); - link->magic = 0; - hashbin_delete(link->lsaps, (FREE_FUNC) __irlmp_close_lsap); - kfree(link); - } -} - -/* - * Function irlmp_connect_request (handle, dlsap, userdata) - * - * Connect with a peer LSAP - * - */ -int irlmp_connect_request(struct lsap_cb *self, __u8 dlsap_sel, - __u32 saddr, __u32 daddr, - struct qos_info *qos, struct sk_buff *userdata) -{ - struct sk_buff *tx_skb = userdata; - struct lap_cb *lap; - struct lsap_cb *lsap; - int ret; - - IRDA_ASSERT(self != NULL, return -EBADR;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EBADR;); - - pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x, saddr=%08x, daddr=%08x\n", - __func__, self->slsap_sel, dlsap_sel, saddr, daddr); - - if (test_bit(0, &self->connected)) { - ret = -EISCONN; - goto err; - } - - /* Client must supply destination device address */ - if (!daddr) { - ret = -EINVAL; - goto err; - } - - /* Any userdata? */ - if (tx_skb == NULL) { - tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - skb_reserve(tx_skb, LMP_MAX_HEADER); - } - - /* Make room for MUX control header (3 bytes) */ - IRDA_ASSERT(skb_headroom(tx_skb) >= LMP_CONTROL_HEADER, return -1;); - skb_push(tx_skb, LMP_CONTROL_HEADER); - - self->dlsap_sel = dlsap_sel; - - /* - * Find the link to where we should try to connect since there may - * be more than one IrDA port on this machine. If the client has - * passed us the saddr (and already knows which link to use), then - * we use that to find the link, if not then we have to look in the - * discovery log and check if any of the links has discovered a - * device with the given daddr - */ - if ((!saddr) || (saddr == DEV_ADDR_ANY)) { - discovery_t *discovery; - unsigned long flags; - - spin_lock_irqsave(&irlmp->cachelog->hb_spinlock, flags); - if (daddr != DEV_ADDR_ANY) - discovery = hashbin_find(irlmp->cachelog, daddr, NULL); - else { - pr_debug("%s(), no daddr\n", __func__); - discovery = (discovery_t *) - hashbin_get_first(irlmp->cachelog); - } - - if (discovery) { - saddr = discovery->data.saddr; - daddr = discovery->data.daddr; - } - spin_unlock_irqrestore(&irlmp->cachelog->hb_spinlock, flags); - } - lap = hashbin_lock_find(irlmp->links, saddr, NULL); - if (lap == NULL) { - pr_debug("%s(), Unable to find a usable link!\n", __func__); - ret = -EHOSTUNREACH; - goto err; - } - - /* Check if LAP is disconnected or already connected */ - if (lap->daddr == DEV_ADDR_ANY) - lap->daddr = daddr; - else if (lap->daddr != daddr) { - /* Check if some LSAPs are active on this LAP */ - if (HASHBIN_GET_SIZE(lap->lsaps) == 0) { - /* No active connection, but LAP hasn't been - * disconnected yet (waiting for timeout in LAP). - * Maybe we could give LAP a bit of help in this case. - */ - pr_debug("%s(), sorry, but I'm waiting for LAP to timeout!\n", - __func__); - ret = -EAGAIN; - goto err; - } - - /* LAP is already connected to a different node, and LAP - * can only talk to one node at a time */ - pr_debug("%s(), sorry, but link is busy!\n", __func__); - ret = -EBUSY; - goto err; - } - - self->lap = lap; - - /* - * Remove LSAP from list of unconnected LSAPs and insert it into the - * list of connected LSAPs for the particular link - */ - lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, NULL); - - IRDA_ASSERT(lsap != NULL, return -1;); - IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;); - IRDA_ASSERT(lsap->lap != NULL, return -1;); - IRDA_ASSERT(lsap->lap->magic == LMP_LAP_MAGIC, return -1;); - - hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, (long) self, - NULL); - - set_bit(0, &self->connected); /* TRUE */ - - /* - * User supplied qos specifications? - */ - if (qos) - self->qos = *qos; - - irlmp_do_lsap_event(self, LM_CONNECT_REQUEST, tx_skb); - - /* Drop reference count - see irlap_data_request(). */ - dev_kfree_skb(tx_skb); - - return 0; - -err: - /* Cleanup */ - if(tx_skb) - dev_kfree_skb(tx_skb); - return ret; -} -EXPORT_SYMBOL(irlmp_connect_request); - -/* - * Function irlmp_connect_indication (self) - * - * Incoming connection - * - */ -void irlmp_connect_indication(struct lsap_cb *self, struct sk_buff *skb) -{ - int max_seg_size; - int lap_header_size; - int max_header_size; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(self->lap != NULL, return;); - - pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n", - __func__, self->slsap_sel, self->dlsap_sel); - - /* Note : self->lap is set in irlmp_link_data_indication(), - * (case CONNECT_CMD:) because we have no way to set it here. - * Similarly, self->dlsap_sel is usually set in irlmp_find_lsap(). - * Jean II */ - - self->qos = *self->lap->qos; - - max_seg_size = self->lap->qos->data_size.value-LMP_HEADER; - lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap); - max_header_size = LMP_HEADER + lap_header_size; - - /* Hide LMP_CONTROL_HEADER header from layer above */ - skb_pull(skb, LMP_CONTROL_HEADER); - - if (self->notify.connect_indication) { - /* Don't forget to refcount it - see irlap_driver_rcv(). */ - skb_get(skb); - self->notify.connect_indication(self->notify.instance, self, - &self->qos, max_seg_size, - max_header_size, skb); - } -} - -/* - * Function irlmp_connect_response (handle, userdata) - * - * Service user is accepting connection - * - */ -int irlmp_connect_response(struct lsap_cb *self, struct sk_buff *userdata) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - IRDA_ASSERT(userdata != NULL, return -1;); - - /* We set the connected bit and move the lsap to the connected list - * in the state machine itself. Jean II */ - - pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n", - __func__, self->slsap_sel, self->dlsap_sel); - - /* Make room for MUX control header (3 bytes) */ - IRDA_ASSERT(skb_headroom(userdata) >= LMP_CONTROL_HEADER, return -1;); - skb_push(userdata, LMP_CONTROL_HEADER); - - irlmp_do_lsap_event(self, LM_CONNECT_RESPONSE, userdata); - - /* Drop reference count - see irlap_data_request(). */ - dev_kfree_skb(userdata); - - return 0; -} -EXPORT_SYMBOL(irlmp_connect_response); - -/* - * Function irlmp_connect_confirm (handle, skb) - * - * LSAP connection confirmed peer device! - */ -void irlmp_connect_confirm(struct lsap_cb *self, struct sk_buff *skb) -{ - int max_header_size; - int lap_header_size; - int max_seg_size; - - IRDA_ASSERT(skb != NULL, return;); - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - IRDA_ASSERT(self->lap != NULL, return;); - - self->qos = *self->lap->qos; - - max_seg_size = self->lap->qos->data_size.value-LMP_HEADER; - lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap); - max_header_size = LMP_HEADER + lap_header_size; - - pr_debug("%s(), max_header_size=%d\n", - __func__, max_header_size); - - /* Hide LMP_CONTROL_HEADER header from layer above */ - skb_pull(skb, LMP_CONTROL_HEADER); - - if (self->notify.connect_confirm) { - /* Don't forget to refcount it - see irlap_driver_rcv() */ - skb_get(skb); - self->notify.connect_confirm(self->notify.instance, self, - &self->qos, max_seg_size, - max_header_size, skb); - } -} - -/* - * Function irlmp_dup (orig, instance) - * - * Duplicate LSAP, can be used by servers to confirm a connection on a - * new LSAP so it can keep listening on the old one. - * - */ -struct lsap_cb *irlmp_dup(struct lsap_cb *orig, void *instance) -{ - struct lsap_cb *new; - unsigned long flags; - - spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags); - - /* Only allowed to duplicate unconnected LSAP's, and only LSAPs - * that have received a connect indication. Jean II */ - if ((!hashbin_find(irlmp->unconnected_lsaps, (long) orig, NULL)) || - (orig->lap == NULL)) { - pr_debug("%s(), invalid LSAP (wrong state)\n", - __func__); - spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, - flags); - return NULL; - } - - /* Allocate a new instance */ - new = kmemdup(orig, sizeof(*new), GFP_ATOMIC); - if (!new) { - pr_debug("%s(), unable to kmalloc\n", __func__); - spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, - flags); - return NULL; - } - /* new->lap = orig->lap; => done in the memcpy() */ - /* new->slsap_sel = orig->slsap_sel; => done in the memcpy() */ - new->conn_skb = NULL; - - spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); - - /* Not everything is the same */ - new->notify.instance = instance; - - init_timer(&new->watchdog_timer); - - hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) new, - (long) new, NULL); - -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - /* Make sure that we invalidate the LSAP cache */ - new->lap->cache.valid = FALSE; -#endif /* CONFIG_IRDA_CACHE_LAST_LSAP */ - - return new; -} - -/* - * Function irlmp_disconnect_request (handle, userdata) - * - * The service user is requesting disconnection, this will not remove the - * LSAP, but only mark it as disconnected - */ -int irlmp_disconnect_request(struct lsap_cb *self, struct sk_buff *userdata) -{ - struct lsap_cb *lsap; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - IRDA_ASSERT(userdata != NULL, return -1;); - - /* Already disconnected ? - * There is a race condition between irlmp_disconnect_indication() - * and us that might mess up the hashbins below. This fixes it. - * Jean II */ - if (! test_and_clear_bit(0, &self->connected)) { - pr_debug("%s(), already disconnected!\n", __func__); - dev_kfree_skb(userdata); - return -1; - } - - skb_push(userdata, LMP_CONTROL_HEADER); - - /* - * Do the event before the other stuff since we must know - * which lap layer that the frame should be transmitted on - */ - irlmp_do_lsap_event(self, LM_DISCONNECT_REQUEST, userdata); - - /* Drop reference count - see irlap_data_request(). */ - dev_kfree_skb(userdata); - - /* - * Remove LSAP from list of connected LSAPs for the particular link - * and insert it into the list of unconnected LSAPs - */ - IRDA_ASSERT(self->lap != NULL, return -1;); - IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); - IRDA_ASSERT(self->lap->lsaps != NULL, return -1;); - - lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL); -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - self->lap->cache.valid = FALSE; -#endif - - IRDA_ASSERT(lsap != NULL, return -1;); - IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;); - IRDA_ASSERT(lsap == self, return -1;); - - hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self, - (long) self, NULL); - - /* Reset some values */ - self->dlsap_sel = LSAP_ANY; - self->lap = NULL; - - return 0; -} -EXPORT_SYMBOL(irlmp_disconnect_request); - -/* - * Function irlmp_disconnect_indication (reason, userdata) - * - * LSAP is being closed! - */ -void irlmp_disconnect_indication(struct lsap_cb *self, LM_REASON reason, - struct sk_buff *skb) -{ - struct lsap_cb *lsap; - - pr_debug("%s(), reason=%s [%d]\n", __func__, - irlmp_reason_str(reason), reason); - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - - pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n", - __func__, self->slsap_sel, self->dlsap_sel); - - /* Already disconnected ? - * There is a race condition between irlmp_disconnect_request() - * and us that might mess up the hashbins below. This fixes it. - * Jean II */ - if (! test_and_clear_bit(0, &self->connected)) { - pr_debug("%s(), already disconnected!\n", __func__); - return; - } - - /* - * Remove association between this LSAP and the link it used - */ - IRDA_ASSERT(self->lap != NULL, return;); - IRDA_ASSERT(self->lap->lsaps != NULL, return;); - - lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL); -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - self->lap->cache.valid = FALSE; -#endif - - IRDA_ASSERT(lsap != NULL, return;); - IRDA_ASSERT(lsap == self, return;); - hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) lsap, - (long) lsap, NULL); - - self->dlsap_sel = LSAP_ANY; - self->lap = NULL; - - /* - * Inform service user - */ - if (self->notify.disconnect_indication) { - /* Don't forget to refcount it - see irlap_driver_rcv(). */ - if(skb) - skb_get(skb); - self->notify.disconnect_indication(self->notify.instance, - self, reason, skb); - } else { - pr_debug("%s(), no handler\n", __func__); - } -} - -/* - * Function irlmp_do_expiry (void) - * - * Do a cleanup of the discovery log (remove old entries) - * - * Note : separate from irlmp_do_discovery() so that we can handle - * passive discovery properly. - */ -void irlmp_do_expiry(void) -{ - struct lap_cb *lap; - - /* - * Expire discovery on all links which are *not* connected. - * On links which are connected, we can't do discovery - * anymore and can't refresh the log, so we freeze the - * discovery log to keep info about the device we are - * connected to. - * This info is mandatory if we want irlmp_connect_request() - * to work properly. - Jean II - */ - lap = (struct lap_cb *) hashbin_get_first(irlmp->links); - while (lap != NULL) { - IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); - - if (lap->lap_state == LAP_STANDBY) { - /* Expire discoveries discovered on this link */ - irlmp_expire_discoveries(irlmp->cachelog, lap->saddr, - FALSE); - } - lap = (struct lap_cb *) hashbin_get_next(irlmp->links); - } -} - -/* - * Function irlmp_do_discovery (nslots) - * - * Do some discovery on all links - * - * Note : log expiry is done above. - */ -void irlmp_do_discovery(int nslots) -{ - struct lap_cb *lap; - __u16 *data_hintsp; - - /* Make sure the value is sane */ - if ((nslots != 1) && (nslots != 6) && (nslots != 8) && (nslots != 16)){ - net_warn_ratelimited("%s: invalid value for number of slots!\n", - __func__); - nslots = sysctl_discovery_slots = 8; - } - - /* Construct new discovery info to be used by IrLAP, */ - data_hintsp = (__u16 *) irlmp->discovery_cmd.data.hints; - put_unaligned(irlmp->hints.word, data_hintsp); - - /* - * Set character set for device name (we use ASCII), and - * copy device name. Remember to make room for a \0 at the - * end - */ - irlmp->discovery_cmd.data.charset = CS_ASCII; - strncpy(irlmp->discovery_cmd.data.info, sysctl_devname, - NICKNAME_MAX_LEN); - irlmp->discovery_cmd.name_len = strlen(irlmp->discovery_cmd.data.info); - irlmp->discovery_cmd.nslots = nslots; - - /* - * Try to send discovery packets on all links - */ - lap = (struct lap_cb *) hashbin_get_first(irlmp->links); - while (lap != NULL) { - IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); - - if (lap->lap_state == LAP_STANDBY) { - /* Try to discover */ - irlmp_do_lap_event(lap, LM_LAP_DISCOVERY_REQUEST, - NULL); - } - lap = (struct lap_cb *) hashbin_get_next(irlmp->links); - } -} - -/* - * Function irlmp_discovery_request (nslots) - * - * Do a discovery of devices in front of the computer - * - * If the caller has registered a client discovery callback, this - * allow him to receive the full content of the discovery log through - * this callback (as normally he will receive only new discoveries). - */ -void irlmp_discovery_request(int nslots) -{ - /* Return current cached discovery log (in full) */ - irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_LOG); - - /* - * Start a single discovery operation if discovery is not already - * running - */ - if (!sysctl_discovery) { - /* Check if user wants to override the default */ - if (nslots == DISCOVERY_DEFAULT_SLOTS) - nslots = sysctl_discovery_slots; - - irlmp_do_discovery(nslots); - /* Note : we never do expiry here. Expiry will run on the - * discovery timer regardless of the state of sysctl_discovery - * Jean II */ - } -} -EXPORT_SYMBOL(irlmp_discovery_request); - -/* - * Function irlmp_get_discoveries (pn, mask, slots) - * - * Return the current discovery log - * - * If discovery is not enabled, you should call this function again - * after 1 or 2 seconds (i.e. after discovery has been done). - */ -struct irda_device_info *irlmp_get_discoveries(int *pn, __u16 mask, int nslots) -{ - /* If discovery is not enabled, it's likely that the discovery log - * will be empty. So, we trigger a single discovery, so that next - * time the user call us there might be some results in the log. - * Jean II - */ - if (!sysctl_discovery) { - /* Check if user wants to override the default */ - if (nslots == DISCOVERY_DEFAULT_SLOTS) - nslots = sysctl_discovery_slots; - - /* Start discovery - will complete sometime later */ - irlmp_do_discovery(nslots); - /* Note : we never do expiry here. Expiry will run on the - * discovery timer regardless of the state of sysctl_discovery - * Jean II */ - } - - /* Return current cached discovery log */ - return irlmp_copy_discoveries(irlmp->cachelog, pn, mask, TRUE); -} -EXPORT_SYMBOL(irlmp_get_discoveries); - -/* - * Function irlmp_notify_client (log) - * - * Notify all about discovered devices - * - * Clients registered with IrLMP are : - * o IrComm - * o IrLAN - * o Any socket (in any state - ouch, that may be a lot !) - * The client may have defined a callback to be notified in case of - * partial/selective discovery based on the hints that it passed to IrLMP. - */ -static inline void -irlmp_notify_client(irlmp_client_t *client, - hashbin_t *log, DISCOVERY_MODE mode) -{ - discinfo_t *discoveries; /* Copy of the discovery log */ - int number; /* Number of nodes in the log */ - int i; - - /* Check if client wants or not partial/selective log (optimisation) */ - if (!client->disco_callback) - return; - - /* - * Locking notes : - * the old code was manipulating the log directly, which was - * very racy. Now, we use copy_discoveries, that protects - * itself while dumping the log for us. - * The overhead of the copy is compensated by the fact that - * we only pass new discoveries in normal mode and don't - * pass the same old entry every 3s to the caller as we used - * to do (virtual function calling is expensive). - * Jean II - */ - - /* - * Now, check all discovered devices (if any), and notify client - * only about the services that the client is interested in - * We also notify only about the new devices unless the caller - * explicitly request a dump of the log. Jean II - */ - discoveries = irlmp_copy_discoveries(log, &number, - client->hint_mask.word, - (mode == DISCOVERY_LOG)); - /* Check if the we got some results */ - if (discoveries == NULL) - return; /* No nodes discovered */ - - /* Pass all entries to the listener */ - for(i = 0; i < number; i++) - client->disco_callback(&(discoveries[i]), mode, client->priv); - - /* Free up our buffer */ - kfree(discoveries); -} - -/* - * Function irlmp_discovery_confirm ( self, log) - * - * Some device(s) answered to our discovery request! Check to see which - * device it is, and give indication to the client(s) - * - */ -void irlmp_discovery_confirm(hashbin_t *log, DISCOVERY_MODE mode) -{ - irlmp_client_t *client; - irlmp_client_t *client_next; - - IRDA_ASSERT(log != NULL, return;); - - if (!(HASHBIN_GET_SIZE(log))) - return; - - /* For each client - notify callback may touch client list */ - client = (irlmp_client_t *) hashbin_get_first(irlmp->clients); - while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL, - (void *) &client_next) ) { - /* Check if we should notify client */ - irlmp_notify_client(client, log, mode); - - client = client_next; - } -} - -/* - * Function irlmp_discovery_expiry (expiry) - * - * This device is no longer been discovered, and therefore it is being - * purged from the discovery log. Inform all clients who have - * registered for this event... - * - * Note : called exclusively from discovery.c - * Note : this is no longer called under discovery spinlock, so the - * client can do whatever he wants in the callback. - */ -void irlmp_discovery_expiry(discinfo_t *expiries, int number) -{ - irlmp_client_t *client; - irlmp_client_t *client_next; - int i; - - IRDA_ASSERT(expiries != NULL, return;); - - /* For each client - notify callback may touch client list */ - client = (irlmp_client_t *) hashbin_get_first(irlmp->clients); - while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL, - (void *) &client_next) ) { - - /* Pass all entries to the listener */ - for(i = 0; i < number; i++) { - /* Check if we should notify client */ - if ((client->expir_callback) && - (client->hint_mask.word & - get_unaligned((__u16 *)expiries[i].hints) - & 0x7f7f) ) - client->expir_callback(&(expiries[i]), - EXPIRY_TIMEOUT, - client->priv); - } - - /* Next client */ - client = client_next; - } -} - -/* - * Function irlmp_get_discovery_response () - * - * Used by IrLAP to get the discovery info it needs when answering - * discovery requests by other devices. - */ -discovery_t *irlmp_get_discovery_response(void) -{ - IRDA_ASSERT(irlmp != NULL, return NULL;); - - put_unaligned(irlmp->hints.word, (__u16 *)irlmp->discovery_rsp.data.hints); - - /* - * Set character set for device name (we use ASCII), and - * copy device name. Remember to make room for a \0 at the - * end - */ - irlmp->discovery_rsp.data.charset = CS_ASCII; - - strncpy(irlmp->discovery_rsp.data.info, sysctl_devname, - NICKNAME_MAX_LEN); - irlmp->discovery_rsp.name_len = strlen(irlmp->discovery_rsp.data.info); - - return &irlmp->discovery_rsp; -} - -/* - * Function irlmp_data_request (self, skb) - * - * Send some data to peer device - * - * Note on skb management : - * After calling the lower layers of the IrDA stack, we always - * kfree() the skb, which drop the reference count (and potentially - * destroy it). - * IrLMP and IrLAP may queue the packet, and in those cases will need - * to use skb_get() to keep it around. - * Jean II - */ -int irlmp_data_request(struct lsap_cb *self, struct sk_buff *userdata) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - - /* Make room for MUX header */ - IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;); - skb_push(userdata, LMP_HEADER); - - ret = irlmp_do_lsap_event(self, LM_DATA_REQUEST, userdata); - - /* Drop reference count - see irlap_data_request(). */ - dev_kfree_skb(userdata); - - return ret; -} -EXPORT_SYMBOL(irlmp_data_request); - -/* - * Function irlmp_data_indication (handle, skb) - * - * Got data from LAP layer so pass it up to upper layer - * - */ -void irlmp_data_indication(struct lsap_cb *self, struct sk_buff *skb) -{ - /* Hide LMP header from layer above */ - skb_pull(skb, LMP_HEADER); - - if (self->notify.data_indication) { - /* Don't forget to refcount it - see irlap_driver_rcv(). */ - skb_get(skb); - self->notify.data_indication(self->notify.instance, self, skb); - } -} - -/* - * Function irlmp_udata_request (self, skb) - */ -int irlmp_udata_request(struct lsap_cb *self, struct sk_buff *userdata) -{ - int ret; - - IRDA_ASSERT(userdata != NULL, return -1;); - - /* Make room for MUX header */ - IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;); - skb_push(userdata, LMP_HEADER); - - ret = irlmp_do_lsap_event(self, LM_UDATA_REQUEST, userdata); - - /* Drop reference count - see irlap_data_request(). */ - dev_kfree_skb(userdata); - - return ret; -} - -/* - * Function irlmp_udata_indication (self, skb) - * - * Send unreliable data (but still within the connection) - * - */ -void irlmp_udata_indication(struct lsap_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* Hide LMP header from layer above */ - skb_pull(skb, LMP_HEADER); - - if (self->notify.udata_indication) { - /* Don't forget to refcount it - see irlap_driver_rcv(). */ - skb_get(skb); - self->notify.udata_indication(self->notify.instance, self, - skb); - } -} - -/* - * Function irlmp_connless_data_request (self, skb) - */ -#ifdef CONFIG_IRDA_ULTRA -int irlmp_connless_data_request(struct lsap_cb *self, struct sk_buff *userdata, - __u8 pid) -{ - struct sk_buff *clone_skb; - struct lap_cb *lap; - - IRDA_ASSERT(userdata != NULL, return -1;); - - /* Make room for MUX and PID header */ - IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER+LMP_PID_HEADER, - return -1;); - - /* Insert protocol identifier */ - skb_push(userdata, LMP_PID_HEADER); - if(self != NULL) - userdata->data[0] = self->pid; - else - userdata->data[0] = pid; - - /* Connectionless sockets must use 0x70 */ - skb_push(userdata, LMP_HEADER); - userdata->data[0] = userdata->data[1] = LSAP_CONNLESS; - - /* Try to send Connectionless packets out on all links */ - lap = (struct lap_cb *) hashbin_get_first(irlmp->links); - while (lap != NULL) { - IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return -1;); - - clone_skb = skb_clone(userdata, GFP_ATOMIC); - if (!clone_skb) { - dev_kfree_skb(userdata); - return -ENOMEM; - } - - irlap_unitdata_request(lap->irlap, clone_skb); - /* irlap_unitdata_request() don't increase refcount, - * so no dev_kfree_skb() - Jean II */ - - lap = (struct lap_cb *) hashbin_get_next(irlmp->links); - } - dev_kfree_skb(userdata); - - return 0; -} -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Function irlmp_connless_data_indication (self, skb) - * - * Receive unreliable data outside any connection. Mostly used by Ultra - * - */ -#ifdef CONFIG_IRDA_ULTRA -void irlmp_connless_data_indication(struct lsap_cb *self, struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* Hide LMP and PID header from layer above */ - skb_pull(skb, LMP_HEADER+LMP_PID_HEADER); - - if (self->notify.udata_indication) { - /* Don't forget to refcount it - see irlap_driver_rcv(). */ - skb_get(skb); - self->notify.udata_indication(self->notify.instance, self, - skb); - } -} -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Propagate status indication from LAP to LSAPs (via LMP) - * This don't trigger any change of state in lap_cb, lmp_cb or lsap_cb, - * and the event is stateless, therefore we can bypass both state machines - * and send the event direct to the LSAP user. - * Jean II - */ -void irlmp_status_indication(struct lap_cb *self, - LINK_STATUS link, LOCK_STATUS lock) -{ - struct lsap_cb *next; - struct lsap_cb *curr; - - /* Send status_indication to all LSAPs using this link */ - curr = (struct lsap_cb *) hashbin_get_first( self->lsaps); - while (NULL != hashbin_find_next(self->lsaps, (long) curr, NULL, - (void *) &next) ) { - IRDA_ASSERT(curr->magic == LMP_LSAP_MAGIC, return;); - /* - * Inform service user if he has requested it - */ - if (curr->notify.status_indication != NULL) - curr->notify.status_indication(curr->notify.instance, - link, lock); - else - pr_debug("%s(), no handler\n", __func__); - - curr = next; - } -} - -/* - * Receive flow control indication from LAP. - * LAP want us to send it one more frame. We implement a simple round - * robin scheduler between the active sockets so that we get a bit of - * fairness. Note that the round robin is far from perfect, but it's - * better than nothing. - * We then poll the selected socket so that we can do synchronous - * refilling of IrLAP (which allow to minimise the number of buffers). - * Jean II - */ -void irlmp_flow_indication(struct lap_cb *self, LOCAL_FLOW flow) -{ - struct lsap_cb *next; - struct lsap_cb *curr; - int lsap_todo; - - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - IRDA_ASSERT(flow == FLOW_START, return;); - - /* Get the number of lsap. That's the only safe way to know - * that we have looped around... - Jean II */ - lsap_todo = HASHBIN_GET_SIZE(self->lsaps); - pr_debug("%s() : %d lsaps to scan\n", __func__, lsap_todo); - - /* Poll lsap in order until the queue is full or until we - * tried them all. - * Most often, the current LSAP will have something to send, - * so we will go through this loop only once. - Jean II */ - while((lsap_todo--) && - (IRLAP_GET_TX_QUEUE_LEN(self->irlap) < LAP_HIGH_THRESHOLD)) { - /* Try to find the next lsap we should poll. */ - next = self->flow_next; - /* If we have no lsap, restart from first one */ - if(next == NULL) - next = (struct lsap_cb *) hashbin_get_first(self->lsaps); - /* Verify current one and find the next one */ - curr = hashbin_find_next(self->lsaps, (long) next, NULL, - (void *) &self->flow_next); - /* Uh-oh... Paranoia */ - if(curr == NULL) - break; - pr_debug("%s() : curr is %p, next was %p and is now %p, still %d to go - queue len = %d\n", - __func__, curr, next, self->flow_next, lsap_todo, - IRLAP_GET_TX_QUEUE_LEN(self->irlap)); - - /* Inform lsap user that it can send one more packet. */ - if (curr->notify.flow_indication != NULL) - curr->notify.flow_indication(curr->notify.instance, - curr, flow); - else - pr_debug("%s(), no handler\n", __func__); - } -} - -#if 0 -/* - * Function irlmp_hint_to_service (hint) - * - * Returns a list of all servics contained in the given hint bits. This - * function assumes that the hint bits have the size of two bytes only - */ -__u8 *irlmp_hint_to_service(__u8 *hint) -{ - __u8 *service; - int i = 0; - - /* - * Allocate array to store services in. 16 entries should be safe - * since we currently only support 2 hint bytes - */ - service = kmalloc(16, GFP_ATOMIC); - if (!service) - return NULL; - - if (!hint[0]) { - pr_debug("<None>\n"); - kfree(service); - return NULL; - } - if (hint[0] & HINT_PNP) - pr_debug("PnP Compatible "); - if (hint[0] & HINT_PDA) - pr_debug("PDA/Palmtop "); - if (hint[0] & HINT_COMPUTER) - pr_debug("Computer "); - if (hint[0] & HINT_PRINTER) { - pr_debug("Printer "); - service[i++] = S_PRINTER; - } - if (hint[0] & HINT_MODEM) - pr_debug("Modem "); - if (hint[0] & HINT_FAX) - pr_debug("Fax "); - if (hint[0] & HINT_LAN) { - pr_debug("LAN Access "); - service[i++] = S_LAN; - } - /* - * Test if extension byte exists. This byte will usually be - * there, but this is not really required by the standard. - * (IrLMP p. 29) - */ - if (hint[0] & HINT_EXTENSION) { - if (hint[1] & HINT_TELEPHONY) { - pr_debug("Telephony "); - service[i++] = S_TELEPHONY; - } - if (hint[1] & HINT_FILE_SERVER) - pr_debug("File Server "); - - if (hint[1] & HINT_COMM) { - pr_debug("IrCOMM "); - service[i++] = S_COMM; - } - if (hint[1] & HINT_OBEX) { - pr_debug("IrOBEX "); - service[i++] = S_OBEX; - } - } - pr_debug("\n"); - - /* So that client can be notified about any discovery */ - service[i++] = S_ANY; - - service[i] = S_END; - - return service; -} -#endif - -static const __u16 service_hint_mapping[S_END][2] = { - { HINT_PNP, 0 }, /* S_PNP */ - { HINT_PDA, 0 }, /* S_PDA */ - { HINT_COMPUTER, 0 }, /* S_COMPUTER */ - { HINT_PRINTER, 0 }, /* S_PRINTER */ - { HINT_MODEM, 0 }, /* S_MODEM */ - { HINT_FAX, 0 }, /* S_FAX */ - { HINT_LAN, 0 }, /* S_LAN */ - { HINT_EXTENSION, HINT_TELEPHONY }, /* S_TELEPHONY */ - { HINT_EXTENSION, HINT_COMM }, /* S_COMM */ - { HINT_EXTENSION, HINT_OBEX }, /* S_OBEX */ - { 0xFF, 0xFF }, /* S_ANY */ -}; - -/* - * Function irlmp_service_to_hint (service) - * - * Converts a service type, to a hint bit - * - * Returns: a 16 bit hint value, with the service bit set - */ -__u16 irlmp_service_to_hint(int service) -{ - __u16_host_order hint; - - hint.byte[0] = service_hint_mapping[service][0]; - hint.byte[1] = service_hint_mapping[service][1]; - - return hint.word; -} -EXPORT_SYMBOL(irlmp_service_to_hint); - -/* - * Function irlmp_register_service (service) - * - * Register local service with IrLMP - * - */ -void *irlmp_register_service(__u16 hints) -{ - irlmp_service_t *service; - - pr_debug("%s(), hints = %04x\n", __func__, hints); - - /* Make a new registration */ - service = kmalloc(sizeof(irlmp_service_t), GFP_ATOMIC); - if (!service) - return NULL; - - service->hints.word = hints; - hashbin_insert(irlmp->services, (irda_queue_t *) service, - (long) service, NULL); - - irlmp->hints.word |= hints; - - return (void *)service; -} -EXPORT_SYMBOL(irlmp_register_service); - -/* - * Function irlmp_unregister_service (handle) - * - * Unregister service with IrLMP. - * - * Returns: 0 on success, -1 on error - */ -int irlmp_unregister_service(void *handle) -{ - irlmp_service_t *service; - unsigned long flags; - - if (!handle) - return -1; - - /* Caller may call with invalid handle (it's legal) - Jean II */ - service = hashbin_lock_find(irlmp->services, (long) handle, NULL); - if (!service) { - pr_debug("%s(), Unknown service!\n", __func__); - return -1; - } - - hashbin_remove_this(irlmp->services, (irda_queue_t *) service); - kfree(service); - - /* Remove old hint bits */ - irlmp->hints.word = 0; - - /* Refresh current hint bits */ - spin_lock_irqsave(&irlmp->services->hb_spinlock, flags); - service = (irlmp_service_t *) hashbin_get_first(irlmp->services); - while (service) { - irlmp->hints.word |= service->hints.word; - - service = (irlmp_service_t *)hashbin_get_next(irlmp->services); - } - spin_unlock_irqrestore(&irlmp->services->hb_spinlock, flags); - return 0; -} -EXPORT_SYMBOL(irlmp_unregister_service); - -/* - * Function irlmp_register_client (hint_mask, callback1, callback2) - * - * Register a local client with IrLMP - * First callback is selective discovery (based on hints) - * Second callback is for selective discovery expiries - * - * Returns: handle > 0 on success, 0 on error - */ -void *irlmp_register_client(__u16 hint_mask, DISCOVERY_CALLBACK1 disco_clb, - DISCOVERY_CALLBACK2 expir_clb, void *priv) -{ - irlmp_client_t *client; - - IRDA_ASSERT(irlmp != NULL, return NULL;); - - /* Make a new registration */ - client = kmalloc(sizeof(irlmp_client_t), GFP_ATOMIC); - if (!client) - return NULL; - - /* Register the details */ - client->hint_mask.word = hint_mask; - client->disco_callback = disco_clb; - client->expir_callback = expir_clb; - client->priv = priv; - - hashbin_insert(irlmp->clients, (irda_queue_t *) client, - (long) client, NULL); - - return (void *) client; -} -EXPORT_SYMBOL(irlmp_register_client); - -/* - * Function irlmp_update_client (handle, hint_mask, callback1, callback2) - * - * Updates specified client (handle) with possibly new hint_mask and - * callback - * - * Returns: 0 on success, -1 on error - */ -int irlmp_update_client(void *handle, __u16 hint_mask, - DISCOVERY_CALLBACK1 disco_clb, - DISCOVERY_CALLBACK2 expir_clb, void *priv) -{ - irlmp_client_t *client; - - if (!handle) - return -1; - - client = hashbin_lock_find(irlmp->clients, (long) handle, NULL); - if (!client) { - pr_debug("%s(), Unknown client!\n", __func__); - return -1; - } - - client->hint_mask.word = hint_mask; - client->disco_callback = disco_clb; - client->expir_callback = expir_clb; - client->priv = priv; - - return 0; -} -EXPORT_SYMBOL(irlmp_update_client); - -/* - * Function irlmp_unregister_client (handle) - * - * Returns: 0 on success, -1 on error - * - */ -int irlmp_unregister_client(void *handle) -{ - struct irlmp_client *client; - - if (!handle) - return -1; - - /* Caller may call with invalid handle (it's legal) - Jean II */ - client = hashbin_lock_find(irlmp->clients, (long) handle, NULL); - if (!client) { - pr_debug("%s(), Unknown client!\n", __func__); - return -1; - } - - pr_debug("%s(), removing client!\n", __func__); - hashbin_remove_this(irlmp->clients, (irda_queue_t *) client); - kfree(client); - - return 0; -} -EXPORT_SYMBOL(irlmp_unregister_client); - -/* - * Function irlmp_slsap_inuse (slsap) - * - * Check if the given source LSAP selector is in use - * - * This function is clearly not very efficient. On the mitigating side, the - * stack make sure that in 99% of the cases, we are called only once - * for each socket allocation. We could probably keep a bitmap - * of the allocated LSAP, but I'm not sure the complexity is worth it. - * Jean II - */ -static int irlmp_slsap_inuse(__u8 slsap_sel) -{ - struct lsap_cb *self; - struct lap_cb *lap; - unsigned long flags; - - IRDA_ASSERT(irlmp != NULL, return TRUE;); - IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return TRUE;); - IRDA_ASSERT(slsap_sel != LSAP_ANY, return TRUE;); - -#ifdef CONFIG_IRDA_ULTRA - /* Accept all bindings to the connectionless LSAP */ - if (slsap_sel == LSAP_CONNLESS) - return FALSE; -#endif /* CONFIG_IRDA_ULTRA */ - - /* Valid values are between 0 and 127 (0x0-0x6F) */ - if (slsap_sel > LSAP_MAX) - return TRUE; - - /* - * Check if slsap is already in use. To do this we have to loop over - * every IrLAP connection and check every LSAP associated with each - * the connection. - */ - spin_lock_irqsave_nested(&irlmp->links->hb_spinlock, flags, - SINGLE_DEPTH_NESTING); - lap = (struct lap_cb *) hashbin_get_first(irlmp->links); - while (lap != NULL) { - IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, goto errlap;); - - /* Careful for priority inversions here ! - * irlmp->links is never taken while another IrDA - * spinlock is held, so we are safe. Jean II */ - spin_lock(&lap->lsaps->hb_spinlock); - - /* For this IrLAP, check all the LSAPs */ - self = (struct lsap_cb *) hashbin_get_first(lap->lsaps); - while (self != NULL) { - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, - goto errlsap;); - - if ((self->slsap_sel == slsap_sel)) { - pr_debug("Source LSAP selector=%02x in use\n", - self->slsap_sel); - goto errlsap; - } - self = (struct lsap_cb*) hashbin_get_next(lap->lsaps); - } - spin_unlock(&lap->lsaps->hb_spinlock); - - /* Next LAP */ - lap = (struct lap_cb *) hashbin_get_next(irlmp->links); - } - spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags); - - /* - * Server sockets are typically waiting for connections and - * therefore reside in the unconnected list. We don't want - * to give out their LSAPs for obvious reasons... - * Jean II - */ - spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags); - - self = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps); - while (self != NULL) { - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, goto erruncon;); - if ((self->slsap_sel == slsap_sel)) { - pr_debug("Source LSAP selector=%02x in use (unconnected)\n", - self->slsap_sel); - goto erruncon; - } - self = (struct lsap_cb*) hashbin_get_next(irlmp->unconnected_lsaps); - } - spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); - - return FALSE; - - /* Error exit from within one of the two nested loops. - * Make sure we release the right spinlock in the righ order. - * Jean II */ -errlsap: - spin_unlock(&lap->lsaps->hb_spinlock); -IRDA_ASSERT_LABEL(errlap:) - spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags); - return TRUE; - - /* Error exit from within the unconnected loop. - * Just one spinlock to release... Jean II */ -erruncon: - spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); - return TRUE; -} - -/* - * Function irlmp_find_free_slsap () - * - * Find a free source LSAP to use. This function is called if the service - * user has requested a source LSAP equal to LM_ANY - */ -static __u8 irlmp_find_free_slsap(void) -{ - __u8 lsap_sel; - int wrapped = 0; - - IRDA_ASSERT(irlmp != NULL, return -1;); - IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return -1;); - - /* Most users don't really care which LSAPs they are given, - * and therefore we automatically give them a free LSAP. - * This function try to find a suitable LSAP, i.e. which is - * not in use and is within the acceptable range. Jean II */ - - do { - /* Always increment to LSAP number before using it. - * In theory, we could reuse the last LSAP number, as long - * as it is no longer in use. Some IrDA stack do that. - * However, the previous socket may be half closed, i.e. - * we closed it, we think it's no longer in use, but the - * other side did not receive our close and think it's - * active and still send data on it. - * This is similar to what is done with PIDs and TCP ports. - * Also, this reduce the number of calls to irlmp_slsap_inuse() - * which is an expensive function to call. - * Jean II */ - irlmp->last_lsap_sel++; - - /* Check if we need to wraparound (0x70-0x7f are reserved) */ - if (irlmp->last_lsap_sel > LSAP_MAX) { - /* 0x00-0x10 are also reserved for well know ports */ - irlmp->last_lsap_sel = 0x10; - - /* Make sure we terminate the loop */ - if (wrapped++) { - net_err_ratelimited("%s: no more free LSAPs !\n", - __func__); - return 0; - } - } - - /* If the LSAP is in use, try the next one. - * Despite the autoincrement, we need to check if the lsap - * is really in use or not, first because LSAP may be - * directly allocated in irlmp_open_lsap(), and also because - * we may wraparound on old sockets. Jean II */ - } while (irlmp_slsap_inuse(irlmp->last_lsap_sel)); - - /* Got it ! */ - lsap_sel = irlmp->last_lsap_sel; - pr_debug("%s(), found free lsap_sel=%02x\n", - __func__, lsap_sel); - - return lsap_sel; -} - -/* - * Function irlmp_convert_lap_reason (lap_reason) - * - * Converts IrLAP disconnect reason codes to IrLMP disconnect reason - * codes - * - */ -LM_REASON irlmp_convert_lap_reason( LAP_REASON lap_reason) -{ - int reason = LM_LAP_DISCONNECT; - - switch (lap_reason) { - case LAP_DISC_INDICATION: /* Received a disconnect request from peer */ - pr_debug("%s(), LAP_DISC_INDICATION\n", __func__); - reason = LM_USER_REQUEST; - break; - case LAP_NO_RESPONSE: /* To many retransmits without response */ - pr_debug("%s(), LAP_NO_RESPONSE\n", __func__); - reason = LM_LAP_DISCONNECT; - break; - case LAP_RESET_INDICATION: - pr_debug("%s(), LAP_RESET_INDICATION\n", __func__); - reason = LM_LAP_RESET; - break; - case LAP_FOUND_NONE: - case LAP_MEDIA_BUSY: - case LAP_PRIMARY_CONFLICT: - pr_debug("%s(), LAP_FOUND_NONE, LAP_MEDIA_BUSY or LAP_PRIMARY_CONFLICT\n", - __func__); - reason = LM_CONNECT_FAILURE; - break; - default: - pr_debug("%s(), Unknown IrLAP disconnect reason %d!\n", - __func__, lap_reason); - reason = LM_LAP_DISCONNECT; - break; - } - - return reason; -} - -#ifdef CONFIG_PROC_FS - -struct irlmp_iter_state { - hashbin_t *hashbin; -}; - -#define LSAP_START_TOKEN ((void *)1) -#define LINK_START_TOKEN ((void *)2) - -static void *irlmp_seq_hb_idx(struct irlmp_iter_state *iter, loff_t *off) -{ - void *element; - - spin_lock_irq(&iter->hashbin->hb_spinlock); - for (element = hashbin_get_first(iter->hashbin); - element != NULL; - element = hashbin_get_next(iter->hashbin)) { - if (!off || (*off)-- == 0) { - /* NB: hashbin left locked */ - return element; - } - } - spin_unlock_irq(&iter->hashbin->hb_spinlock); - iter->hashbin = NULL; - return NULL; -} - - -static void *irlmp_seq_start(struct seq_file *seq, loff_t *pos) -{ - struct irlmp_iter_state *iter = seq->private; - void *v; - loff_t off = *pos; - - iter->hashbin = NULL; - if (off-- == 0) - return LSAP_START_TOKEN; - - iter->hashbin = irlmp->unconnected_lsaps; - v = irlmp_seq_hb_idx(iter, &off); - if (v) - return v; - - if (off-- == 0) - return LINK_START_TOKEN; - - iter->hashbin = irlmp->links; - return irlmp_seq_hb_idx(iter, &off); -} - -static void *irlmp_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct irlmp_iter_state *iter = seq->private; - - ++*pos; - - if (v == LSAP_START_TOKEN) { /* start of list of lsaps */ - iter->hashbin = irlmp->unconnected_lsaps; - v = irlmp_seq_hb_idx(iter, NULL); - return v ? v : LINK_START_TOKEN; - } - - if (v == LINK_START_TOKEN) { /* start of list of links */ - iter->hashbin = irlmp->links; - return irlmp_seq_hb_idx(iter, NULL); - } - - v = hashbin_get_next(iter->hashbin); - - if (v == NULL) { /* no more in this hash bin */ - spin_unlock_irq(&iter->hashbin->hb_spinlock); - - if (iter->hashbin == irlmp->unconnected_lsaps) - v = LINK_START_TOKEN; - - iter->hashbin = NULL; - } - return v; -} - -static void irlmp_seq_stop(struct seq_file *seq, void *v) -{ - struct irlmp_iter_state *iter = seq->private; - - if (iter->hashbin) - spin_unlock_irq(&iter->hashbin->hb_spinlock); -} - -static int irlmp_seq_show(struct seq_file *seq, void *v) -{ - const struct irlmp_iter_state *iter = seq->private; - struct lsap_cb *self = v; - - if (v == LSAP_START_TOKEN) - seq_puts(seq, "Unconnected LSAPs:\n"); - else if (v == LINK_START_TOKEN) - seq_puts(seq, "\nRegistered Link Layers:\n"); - else if (iter->hashbin == irlmp->unconnected_lsaps) { - self = v; - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EINVAL; ); - seq_printf(seq, "lsap state: %s, ", - irlsap_state[ self->lsap_state]); - seq_printf(seq, - "slsap_sel: %#02x, dlsap_sel: %#02x, ", - self->slsap_sel, self->dlsap_sel); - seq_printf(seq, "(%s)", self->notify.name); - seq_printf(seq, "\n"); - } else if (iter->hashbin == irlmp->links) { - struct lap_cb *lap = v; - - seq_printf(seq, "lap state: %s, ", - irlmp_state[lap->lap_state]); - - seq_printf(seq, "saddr: %#08x, daddr: %#08x, ", - lap->saddr, lap->daddr); - seq_printf(seq, "num lsaps: %d", - HASHBIN_GET_SIZE(lap->lsaps)); - seq_printf(seq, "\n"); - - /* Careful for priority inversions here ! - * All other uses of attrib spinlock are independent of - * the object spinlock, so we are safe. Jean II */ - spin_lock(&lap->lsaps->hb_spinlock); - - seq_printf(seq, "\n Connected LSAPs:\n"); - for (self = (struct lsap_cb *) hashbin_get_first(lap->lsaps); - self != NULL; - self = (struct lsap_cb *)hashbin_get_next(lap->lsaps)) { - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, - goto outloop;); - seq_printf(seq, " lsap state: %s, ", - irlsap_state[ self->lsap_state]); - seq_printf(seq, - "slsap_sel: %#02x, dlsap_sel: %#02x, ", - self->slsap_sel, self->dlsap_sel); - seq_printf(seq, "(%s)", self->notify.name); - seq_putc(seq, '\n'); - - } - IRDA_ASSERT_LABEL(outloop:) - spin_unlock(&lap->lsaps->hb_spinlock); - seq_putc(seq, '\n'); - } else - return -EINVAL; - - return 0; -} - -static const struct seq_operations irlmp_seq_ops = { - .start = irlmp_seq_start, - .next = irlmp_seq_next, - .stop = irlmp_seq_stop, - .show = irlmp_seq_show, -}; - -static int irlmp_seq_open(struct inode *inode, struct file *file) -{ - IRDA_ASSERT(irlmp != NULL, return -EINVAL;); - - return seq_open_private(file, &irlmp_seq_ops, - sizeof(struct irlmp_iter_state)); -} - -const struct file_operations irlmp_seq_fops = { - .owner = THIS_MODULE, - .open = irlmp_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release_private, -}; - -#endif /* PROC_FS */ diff --git a/net/irda/irlmp_event.c b/net/irda/irlmp_event.c deleted file mode 100644 index e306cf2c1e04..000000000000 --- a/net/irda/irlmp_event.c +++ /dev/null @@ -1,886 +0,0 @@ -/********************************************************************* - * - * Filename: irlmp_event.c - * Version: 0.8 - * Description: An IrDA LMP event driver for Linux - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Mon Aug 4 20:40:53 1997 - * Modified at: Tue Dec 14 23:04:16 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/kernel.h> - -#include <net/irda/irda.h> -#include <net/irda/timer.h> -#include <net/irda/irlap.h> -#include <net/irda/irlmp.h> -#include <net/irda/irlmp_frame.h> -#include <net/irda/irlmp_event.h> - -const char *const irlmp_state[] = { - "LAP_STANDBY", - "LAP_U_CONNECT", - "LAP_ACTIVE", -}; - -const char *const irlsap_state[] = { - "LSAP_DISCONNECTED", - "LSAP_CONNECT", - "LSAP_CONNECT_PEND", - "LSAP_DATA_TRANSFER_READY", - "LSAP_SETUP", - "LSAP_SETUP_PEND", -}; - -static const char *const irlmp_event[] __maybe_unused = { - "LM_CONNECT_REQUEST", - "LM_CONNECT_CONFIRM", - "LM_CONNECT_RESPONSE", - "LM_CONNECT_INDICATION", - - "LM_DISCONNECT_INDICATION", - "LM_DISCONNECT_REQUEST", - - "LM_DATA_REQUEST", - "LM_UDATA_REQUEST", - "LM_DATA_INDICATION", - "LM_UDATA_INDICATION", - - "LM_WATCHDOG_TIMEOUT", - - /* IrLAP events */ - "LM_LAP_CONNECT_REQUEST", - "LM_LAP_CONNECT_INDICATION", - "LM_LAP_CONNECT_CONFIRM", - "LM_LAP_DISCONNECT_INDICATION", - "LM_LAP_DISCONNECT_REQUEST", - "LM_LAP_DISCOVERY_REQUEST", - "LM_LAP_DISCOVERY_CONFIRM", - "LM_LAP_IDLE_TIMEOUT", -}; - -/* LAP Connection control proto declarations */ -static void irlmp_state_standby (struct lap_cb *, IRLMP_EVENT, - struct sk_buff *); -static void irlmp_state_u_connect(struct lap_cb *, IRLMP_EVENT, - struct sk_buff *); -static void irlmp_state_active (struct lap_cb *, IRLMP_EVENT, - struct sk_buff *); - -/* LSAP Connection control proto declarations */ -static int irlmp_state_disconnected(struct lsap_cb *, IRLMP_EVENT, - struct sk_buff *); -static int irlmp_state_connect (struct lsap_cb *, IRLMP_EVENT, - struct sk_buff *); -static int irlmp_state_connect_pend(struct lsap_cb *, IRLMP_EVENT, - struct sk_buff *); -static int irlmp_state_dtr (struct lsap_cb *, IRLMP_EVENT, - struct sk_buff *); -static int irlmp_state_setup (struct lsap_cb *, IRLMP_EVENT, - struct sk_buff *); -static int irlmp_state_setup_pend (struct lsap_cb *, IRLMP_EVENT, - struct sk_buff *); - -static void (*lap_state[]) (struct lap_cb *, IRLMP_EVENT, struct sk_buff *) = -{ - irlmp_state_standby, - irlmp_state_u_connect, - irlmp_state_active, -}; - -static int (*lsap_state[])( struct lsap_cb *, IRLMP_EVENT, struct sk_buff *) = -{ - irlmp_state_disconnected, - irlmp_state_connect, - irlmp_state_connect_pend, - irlmp_state_dtr, - irlmp_state_setup, - irlmp_state_setup_pend -}; - -static inline void irlmp_next_lap_state(struct lap_cb *self, - IRLMP_STATE state) -{ - /* - pr_debug("%s(), LMP LAP = %s\n", __func__, irlmp_state[state]); - */ - self->lap_state = state; -} - -static inline void irlmp_next_lsap_state(struct lsap_cb *self, - LSAP_STATE state) -{ - /* - IRDA_ASSERT(self != NULL, return;); - pr_debug("%s(), LMP LSAP = %s\n", __func__, irlsap_state[state]); - */ - self->lsap_state = state; -} - -/* Do connection control events */ -int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - - pr_debug("%s(), EVENT = %s, STATE = %s\n", - __func__, irlmp_event[event], irlsap_state[self->lsap_state]); - - return (*lsap_state[self->lsap_state]) (self, event, skb); -} - -/* - * Function do_lap_event (event, skb, info) - * - * Do IrLAP control events - * - */ -void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - - pr_debug("%s(), EVENT = %s, STATE = %s\n", __func__, - irlmp_event[event], - irlmp_state[self->lap_state]); - - (*lap_state[self->lap_state]) (self, event, skb); -} - -void irlmp_discovery_timer_expired(void *data) -{ - /* We always cleanup the log (active & passive discovery) */ - irlmp_do_expiry(); - - irlmp_do_discovery(sysctl_discovery_slots); - - /* Restart timer */ - irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout * HZ); -} - -void irlmp_watchdog_timer_expired(void *data) -{ - struct lsap_cb *self = (struct lsap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); - - irlmp_do_lsap_event(self, LM_WATCHDOG_TIMEOUT, NULL); -} - -void irlmp_idle_timer_expired(void *data) -{ - struct lap_cb *self = (struct lap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - - irlmp_do_lap_event(self, LM_LAP_IDLE_TIMEOUT, NULL); -} - -/* - * Send an event on all LSAPs attached to this LAP. - */ -static inline void -irlmp_do_all_lsap_event(hashbin_t * lsap_hashbin, - IRLMP_EVENT event) -{ - struct lsap_cb *lsap; - struct lsap_cb *lsap_next; - - /* Note : this function use the new hashbin_find_next() - * function, instead of the old hashbin_get_next(). - * This make sure that we are always pointing one lsap - * ahead, so that if the current lsap is removed as the - * result of sending the event, we don't care. - * Also, as we store the context ourselves, if an enumeration - * of the same lsap hashbin happens as the result of sending the - * event, we don't care. - * The only problem is if the next lsap is removed. In that case, - * hashbin_find_next() will return NULL and we will abort the - * enumeration. - Jean II */ - - /* Also : we don't accept any skb in input. We can *NOT* pass - * the same skb to multiple clients safely, we would need to - * skb_clone() it. - Jean II */ - - lsap = (struct lsap_cb *) hashbin_get_first(lsap_hashbin); - - while (NULL != hashbin_find_next(lsap_hashbin, - (long) lsap, - NULL, - (void *) &lsap_next) ) { - irlmp_do_lsap_event(lsap, event, NULL); - lsap = lsap_next; - } -} - -/********************************************************************* - * - * LAP connection control states - * - ********************************************************************/ - -/* - * Function irlmp_state_standby (event, skb, info) - * - * STANDBY, The IrLAP connection does not exist. - * - */ -static void irlmp_state_standby(struct lap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - IRDA_ASSERT(self->irlap != NULL, return;); - - switch (event) { - case LM_LAP_DISCOVERY_REQUEST: - /* irlmp_next_station_state( LMP_DISCOVER); */ - - irlap_discovery_request(self->irlap, &irlmp->discovery_cmd); - break; - case LM_LAP_CONNECT_INDICATION: - /* It's important to switch state first, to avoid IrLMP to - * think that the link is free since IrLMP may then start - * discovery before the connection is properly set up. DB. - */ - irlmp_next_lap_state(self, LAP_ACTIVE); - - /* Just accept connection TODO, this should be fixed */ - irlap_connect_response(self->irlap, skb); - break; - case LM_LAP_CONNECT_REQUEST: - pr_debug("%s() LS_CONNECT_REQUEST\n", __func__); - - irlmp_next_lap_state(self, LAP_U_CONNECT); - - /* FIXME: need to set users requested QoS */ - irlap_connect_request(self->irlap, self->daddr, NULL, 0); - break; - case LM_LAP_DISCONNECT_INDICATION: - pr_debug("%s(), Error LM_LAP_DISCONNECT_INDICATION\n", - __func__); - - irlmp_next_lap_state(self, LAP_STANDBY); - break; - default: - pr_debug("%s(), Unknown event %s\n", - __func__, irlmp_event[event]); - break; - } -} - -/* - * Function irlmp_state_u_connect (event, skb, info) - * - * U_CONNECT, The layer above has tried to open an LSAP connection but - * since the IrLAP connection does not exist, we must first start an - * IrLAP connection. We are now waiting response from IrLAP. - * */ -static void irlmp_state_u_connect(struct lap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - pr_debug("%s(), event=%s\n", __func__, irlmp_event[event]); - - switch (event) { - case LM_LAP_CONNECT_INDICATION: - /* It's important to switch state first, to avoid IrLMP to - * think that the link is free since IrLMP may then start - * discovery before the connection is properly set up. DB. - */ - irlmp_next_lap_state(self, LAP_ACTIVE); - - /* Just accept connection TODO, this should be fixed */ - irlap_connect_response(self->irlap, skb); - - /* Tell LSAPs that they can start sending data */ - irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); - - /* Note : by the time we get there (LAP retries and co), - * the lsaps may already have gone. This avoid getting stuck - * forever in LAP_ACTIVE state - Jean II */ - if (HASHBIN_GET_SIZE(self->lsaps) == 0) { - pr_debug("%s() NO LSAPs !\n", __func__); - irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT); - } - break; - case LM_LAP_CONNECT_REQUEST: - /* Already trying to connect */ - break; - case LM_LAP_CONNECT_CONFIRM: - /* For all lsap_ce E Associated do LS_Connect_confirm */ - irlmp_next_lap_state(self, LAP_ACTIVE); - - /* Tell LSAPs that they can start sending data */ - irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); - - /* Note : by the time we get there (LAP retries and co), - * the lsaps may already have gone. This avoid getting stuck - * forever in LAP_ACTIVE state - Jean II */ - if (HASHBIN_GET_SIZE(self->lsaps) == 0) { - pr_debug("%s() NO LSAPs !\n", __func__); - irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT); - } - break; - case LM_LAP_DISCONNECT_INDICATION: - pr_debug("%s(), LM_LAP_DISCONNECT_INDICATION\n", __func__); - irlmp_next_lap_state(self, LAP_STANDBY); - - /* Send disconnect event to all LSAPs using this link */ - irlmp_do_all_lsap_event(self->lsaps, - LM_LAP_DISCONNECT_INDICATION); - break; - case LM_LAP_DISCONNECT_REQUEST: - pr_debug("%s(), LM_LAP_DISCONNECT_REQUEST\n", __func__); - - /* One of the LSAP did timeout or was closed, if it was - * the last one, try to get out of here - Jean II */ - if (HASHBIN_GET_SIZE(self->lsaps) <= 1) { - irlap_disconnect_request(self->irlap); - } - break; - default: - pr_debug("%s(), Unknown event %s\n", - __func__, irlmp_event[event]); - break; - } -} - -/* - * Function irlmp_state_active (event, skb, info) - * - * ACTIVE, IrLAP connection is active - * - */ -static void irlmp_state_active(struct lap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - switch (event) { - case LM_LAP_CONNECT_REQUEST: - pr_debug("%s(), LS_CONNECT_REQUEST\n", __func__); - - /* - * IrLAP may have a pending disconnect. We tried to close - * IrLAP, but it was postponed because the link was - * busy or we were still sending packets. As we now - * need it, make sure it stays on. Jean II - */ - irlap_clear_disconnect(self->irlap); - - /* - * LAP connection already active, just bounce back! Since we - * don't know which LSAP that tried to do this, we have to - * notify all LSAPs using this LAP, but that should be safe to - * do anyway. - */ - irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); - - /* Needed by connect indication */ - irlmp_do_all_lsap_event(irlmp->unconnected_lsaps, - LM_LAP_CONNECT_CONFIRM); - /* Keep state */ - break; - case LM_LAP_DISCONNECT_REQUEST: - /* - * Need to find out if we should close IrLAP or not. If there - * is only one LSAP connection left on this link, that LSAP - * must be the one that tries to close IrLAP. It will be - * removed later and moved to the list of unconnected LSAPs - */ - if (HASHBIN_GET_SIZE(self->lsaps) > 0) { - /* Timer value is checked in irsysctl - Jean II */ - irlmp_start_idle_timer(self, sysctl_lap_keepalive_time * HZ / 1000); - } else { - /* No more connections, so close IrLAP */ - - /* We don't want to change state just yet, because - * we want to reflect accurately the real state of - * the LAP, not the state we wish it was in, - * so that we don't lose LM_LAP_CONNECT_REQUEST. - * In some cases, IrLAP won't close the LAP - * immediately. For example, it might still be - * retrying packets or waiting for the pf bit. - * As the LAP always send a DISCONNECT_INDICATION - * in PCLOSE or SCLOSE, just change state on that. - * Jean II */ - irlap_disconnect_request(self->irlap); - } - break; - case LM_LAP_IDLE_TIMEOUT: - if (HASHBIN_GET_SIZE(self->lsaps) == 0) { - /* Same reasoning as above - keep state */ - irlap_disconnect_request(self->irlap); - } - break; - case LM_LAP_DISCONNECT_INDICATION: - irlmp_next_lap_state(self, LAP_STANDBY); - - /* In some case, at this point our side has already closed - * all lsaps, and we are waiting for the idle_timer to - * expire. If another device reconnect immediately, the - * idle timer will expire in the midle of the connection - * initialisation, screwing up things a lot... - * Therefore, we must stop the timer... */ - irlmp_stop_idle_timer(self); - - /* - * Inform all connected LSAP's using this link - */ - irlmp_do_all_lsap_event(self->lsaps, - LM_LAP_DISCONNECT_INDICATION); - - /* Force an expiry of the discovery log. - * Now that the LAP is free, the system may attempt to - * connect to another device. Unfortunately, our entries - * are stale. There is a small window (<3s) before the - * normal discovery will run and where irlmp_connect_request() - * can get the wrong info, so make sure things get - * cleaned *NOW* ;-) - Jean II */ - irlmp_do_expiry(); - break; - default: - pr_debug("%s(), Unknown event %s\n", - __func__, irlmp_event[event]); - break; - } -} - -/********************************************************************* - * - * LSAP connection control states - * - ********************************************************************/ - -/* - * Function irlmp_state_disconnected (event, skb, info) - * - * DISCONNECTED - * - */ -static int irlmp_state_disconnected(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - - switch (event) { -#ifdef CONFIG_IRDA_ULTRA - case LM_UDATA_INDICATION: - /* This is most bizarre. Those packets are aka unreliable - * connected, aka IrLPT or SOCK_DGRAM/IRDAPROTO_UNITDATA. - * Why do we pass them as Ultra ??? Jean II */ - irlmp_connless_data_indication(self, skb); - break; -#endif /* CONFIG_IRDA_ULTRA */ - case LM_CONNECT_REQUEST: - pr_debug("%s(), LM_CONNECT_REQUEST\n", __func__); - - if (self->conn_skb) { - net_warn_ratelimited("%s: busy with another request!\n", - __func__); - return -EBUSY; - } - /* Don't forget to refcount it (see irlmp_connect_request()) */ - skb_get(skb); - self->conn_skb = skb; - - irlmp_next_lsap_state(self, LSAP_SETUP_PEND); - - /* Start watchdog timer (5 secs for now) */ - irlmp_start_watchdog_timer(self, 5*HZ); - - irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL); - break; - case LM_CONNECT_INDICATION: - if (self->conn_skb) { - net_warn_ratelimited("%s: busy with another request!\n", - __func__); - return -EBUSY; - } - /* Don't forget to refcount it (see irlap_driver_rcv()) */ - skb_get(skb); - self->conn_skb = skb; - - irlmp_next_lsap_state(self, LSAP_CONNECT_PEND); - - /* Start watchdog timer - * This is not mentionned in the spec, but there is a rare - * race condition that can get the socket stuck. - * If we receive this event while our LAP is closing down, - * the LM_LAP_CONNECT_REQUEST get lost and we get stuck in - * CONNECT_PEND state forever. - * The other cause of getting stuck down there is if the - * higher layer never reply to the CONNECT_INDICATION. - * Anyway, it make sense to make sure that we always have - * a backup plan. 1 second is plenty (should be immediate). - * Jean II */ - irlmp_start_watchdog_timer(self, 1*HZ); - - irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL); - break; - default: - pr_debug("%s(), Unknown event %s on LSAP %#02x\n", - __func__, irlmp_event[event], self->slsap_sel); - break; - } - return ret; -} - -/* - * Function irlmp_state_connect (self, event, skb) - * - * CONNECT - * - */ -static int irlmp_state_connect(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - struct lsap_cb *lsap; - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - - switch (event) { - case LM_CONNECT_RESPONSE: - /* - * Bind this LSAP to the IrLAP link where the connect was - * received - */ - lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, - NULL); - - IRDA_ASSERT(lsap == self, return -1;); - IRDA_ASSERT(self->lap != NULL, return -1;); - IRDA_ASSERT(self->lap->lsaps != NULL, return -1;); - - hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, - (long) self, NULL); - - set_bit(0, &self->connected); /* TRUE */ - - irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, - self->slsap_sel, CONNECT_CNF, skb); - - del_timer(&self->watchdog_timer); - - irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY); - break; - case LM_WATCHDOG_TIMEOUT: - /* May happen, who knows... - * Jean II */ - pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__); - - /* Disconnect, get out... - Jean II */ - self->lap = NULL; - self->dlsap_sel = LSAP_ANY; - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - break; - default: - /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we - * are *not* yet bound to the IrLAP link. Jean II */ - pr_debug("%s(), Unknown event %s on LSAP %#02x\n", - __func__, irlmp_event[event], self->slsap_sel); - break; - } - return ret; -} - -/* - * Function irlmp_state_connect_pend (event, skb, info) - * - * CONNECT_PEND - * - */ -static int irlmp_state_connect_pend(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - struct sk_buff *tx_skb; - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - - switch (event) { - case LM_CONNECT_REQUEST: - /* Keep state */ - break; - case LM_CONNECT_RESPONSE: - pr_debug("%s(), LM_CONNECT_RESPONSE, no indication issued yet\n", - __func__); - /* Keep state */ - break; - case LM_DISCONNECT_REQUEST: - pr_debug("%s(), LM_DISCONNECT_REQUEST, not yet bound to IrLAP connection\n", - __func__); - /* Keep state */ - break; - case LM_LAP_CONNECT_CONFIRM: - pr_debug("%s(), LS_CONNECT_CONFIRM\n", __func__); - irlmp_next_lsap_state(self, LSAP_CONNECT); - - tx_skb = self->conn_skb; - self->conn_skb = NULL; - - irlmp_connect_indication(self, tx_skb); - /* Drop reference count - see irlmp_connect_indication(). */ - dev_kfree_skb(tx_skb); - break; - case LM_WATCHDOG_TIMEOUT: - /* Will happen in some rare cases because of a race condition. - * Just make sure we don't stay there forever... - * Jean II */ - pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__); - - /* Go back to disconnected mode, keep the socket waiting */ - self->lap = NULL; - self->dlsap_sel = LSAP_ANY; - if(self->conn_skb) - dev_kfree_skb(self->conn_skb); - self->conn_skb = NULL; - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - break; - default: - /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we - * are *not* yet bound to the IrLAP link. Jean II */ - pr_debug("%s(), Unknown event %s on LSAP %#02x\n", - __func__, irlmp_event[event], self->slsap_sel); - break; - } - return ret; -} - -/* - * Function irlmp_state_dtr (self, event, skb) - * - * DATA_TRANSFER_READY - * - */ -static int irlmp_state_dtr(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - LM_REASON reason; - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - IRDA_ASSERT(self->lap != NULL, return -1;); - - switch (event) { - case LM_DATA_REQUEST: /* Optimize for the common case */ - irlmp_send_data_pdu(self->lap, self->dlsap_sel, - self->slsap_sel, FALSE, skb); - break; - case LM_DATA_INDICATION: /* Optimize for the common case */ - irlmp_data_indication(self, skb); - break; - case LM_UDATA_REQUEST: - IRDA_ASSERT(skb != NULL, return -1;); - irlmp_send_data_pdu(self->lap, self->dlsap_sel, - self->slsap_sel, TRUE, skb); - break; - case LM_UDATA_INDICATION: - irlmp_udata_indication(self, skb); - break; - case LM_CONNECT_REQUEST: - pr_debug("%s(), LM_CONNECT_REQUEST, error, LSAP already connected\n", - __func__); - /* Keep state */ - break; - case LM_CONNECT_RESPONSE: - pr_debug("%s(), LM_CONNECT_RESPONSE, error, LSAP already connected\n", - __func__); - /* Keep state */ - break; - case LM_DISCONNECT_REQUEST: - irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, self->slsap_sel, - DISCONNECT, skb); - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - /* Called only from irlmp_disconnect_request(), will - * unbind from LAP over there. Jean II */ - - /* Try to close the LAP connection if its still there */ - if (self->lap) { - pr_debug("%s(), trying to close IrLAP\n", - __func__); - irlmp_do_lap_event(self->lap, - LM_LAP_DISCONNECT_REQUEST, - NULL); - } - break; - case LM_LAP_DISCONNECT_INDICATION: - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - reason = irlmp_convert_lap_reason(self->lap->reason); - - irlmp_disconnect_indication(self, reason, NULL); - break; - case LM_DISCONNECT_INDICATION: - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - IRDA_ASSERT(self->lap != NULL, return -1;); - IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); - - IRDA_ASSERT(skb != NULL, return -1;); - IRDA_ASSERT(skb->len > 3, return -1;); - reason = skb->data[3]; - - /* Try to close the LAP connection */ - pr_debug("%s(), trying to close IrLAP\n", __func__); - irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); - - irlmp_disconnect_indication(self, reason, skb); - break; - default: - pr_debug("%s(), Unknown event %s on LSAP %#02x\n", - __func__, irlmp_event[event], self->slsap_sel); - break; - } - return ret; -} - -/* - * Function irlmp_state_setup (event, skb, info) - * - * SETUP, Station Control has set up the underlying IrLAP connection. - * An LSAP connection request has been transmitted to the peer - * LSAP-Connection Control FSM and we are awaiting reply. - */ -static int irlmp_state_setup(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - LM_REASON reason; - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); - - switch (event) { - case LM_CONNECT_CONFIRM: - irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY); - - del_timer(&self->watchdog_timer); - - irlmp_connect_confirm(self, skb); - break; - case LM_DISCONNECT_INDICATION: - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - IRDA_ASSERT(self->lap != NULL, return -1;); - IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); - - IRDA_ASSERT(skb != NULL, return -1;); - IRDA_ASSERT(skb->len > 3, return -1;); - reason = skb->data[3]; - - /* Try to close the LAP connection */ - pr_debug("%s(), trying to close IrLAP\n", __func__); - irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); - - irlmp_disconnect_indication(self, reason, skb); - break; - case LM_LAP_DISCONNECT_INDICATION: - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - del_timer(&self->watchdog_timer); - - IRDA_ASSERT(self->lap != NULL, return -1;); - IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); - - reason = irlmp_convert_lap_reason(self->lap->reason); - - irlmp_disconnect_indication(self, reason, skb); - break; - case LM_WATCHDOG_TIMEOUT: - pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__); - - IRDA_ASSERT(self->lap != NULL, return -1;); - irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL); - break; - default: - pr_debug("%s(), Unknown event %s on LSAP %#02x\n", - __func__, irlmp_event[event], self->slsap_sel); - break; - } - return ret; -} - -/* - * Function irlmp_state_setup_pend (event, skb, info) - * - * SETUP_PEND, An LM_CONNECT_REQUEST has been received from the service - * user to set up an LSAP connection. A request has been sent to the - * LAP FSM to set up the underlying IrLAP connection, and we - * are awaiting confirm. - */ -static int irlmp_state_setup_pend(struct lsap_cb *self, IRLMP_EVENT event, - struct sk_buff *skb) -{ - struct sk_buff *tx_skb; - LM_REASON reason; - int ret = 0; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(irlmp != NULL, return -1;); - - switch (event) { - case LM_LAP_CONNECT_CONFIRM: - IRDA_ASSERT(self->conn_skb != NULL, return -1;); - - tx_skb = self->conn_skb; - self->conn_skb = NULL; - - irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, - self->slsap_sel, CONNECT_CMD, tx_skb); - /* Drop reference count - see irlap_data_request(). */ - dev_kfree_skb(tx_skb); - - irlmp_next_lsap_state(self, LSAP_SETUP); - break; - case LM_WATCHDOG_TIMEOUT: - pr_debug("%s() : WATCHDOG_TIMEOUT !\n", __func__); - - IRDA_ASSERT(self->lap != NULL, return -1;); - irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL); - break; - case LM_LAP_DISCONNECT_INDICATION: /* LS_Disconnect.indication */ - del_timer( &self->watchdog_timer); - - irlmp_next_lsap_state(self, LSAP_DISCONNECTED); - - reason = irlmp_convert_lap_reason(self->lap->reason); - - irlmp_disconnect_indication(self, reason, NULL); - break; - default: - pr_debug("%s(), Unknown event %s on LSAP %#02x\n", - __func__, irlmp_event[event], self->slsap_sel); - break; - } - return ret; -} diff --git a/net/irda/irlmp_frame.c b/net/irda/irlmp_frame.c deleted file mode 100644 index 38b0f994bc7b..000000000000 --- a/net/irda/irlmp_frame.c +++ /dev/null @@ -1,476 +0,0 @@ -/********************************************************************* - * - * Filename: irlmp_frame.c - * Version: 0.9 - * Description: IrLMP frame implementation - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Tue Aug 19 02:09:59 1997 - * Modified at: Mon Dec 13 13:41:12 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no> - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/skbuff.h> -#include <linux/kernel.h> - -#include <net/irda/irda.h> -#include <net/irda/irlap.h> -#include <net/irda/timer.h> -#include <net/irda/irlmp.h> -#include <net/irda/irlmp_frame.h> -#include <net/irda/discovery.h> - -static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap, - __u8 slsap, int status, hashbin_t *); - -inline void irlmp_send_data_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap, - int expedited, struct sk_buff *skb) -{ - skb->data[0] = dlsap; - skb->data[1] = slsap; - - if (expedited) { - pr_debug("%s(), sending expedited data\n", __func__); - irlap_data_request(self->irlap, skb, TRUE); - } else - irlap_data_request(self->irlap, skb, FALSE); -} - -/* - * Function irlmp_send_lcf_pdu (dlsap, slsap, opcode,skb) - * - * Send Link Control Frame to IrLAP - */ -void irlmp_send_lcf_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap, - __u8 opcode, struct sk_buff *skb) -{ - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - frame = skb->data; - - frame[0] = dlsap | CONTROL_BIT; - frame[1] = slsap; - - frame[2] = opcode; - - if (opcode == DISCONNECT) - frame[3] = 0x01; /* Service user request */ - else - frame[3] = 0x00; /* rsvd */ - - irlap_data_request(self->irlap, skb, FALSE); -} - -/* - * Function irlmp_input (skb) - * - * Used by IrLAP to pass received data frames to IrLMP layer - * - */ -void irlmp_link_data_indication(struct lap_cb *self, struct sk_buff *skb, - int unreliable) -{ - struct lsap_cb *lsap; - __u8 slsap_sel; /* Source (this) LSAP address */ - __u8 dlsap_sel; /* Destination LSAP address */ - __u8 *fp; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - IRDA_ASSERT(skb->len > 2, return;); - - fp = skb->data; - - /* - * The next statements may be confusing, but we do this so that - * destination LSAP of received frame is source LSAP in our view - */ - slsap_sel = fp[0] & LSAP_MASK; - dlsap_sel = fp[1]; - - /* - * Check if this is an incoming connection, since we must deal with - * it in a different way than other established connections. - */ - if ((fp[0] & CONTROL_BIT) && (fp[2] == CONNECT_CMD)) { - pr_debug("%s(), incoming connection, source LSAP=%d, dest LSAP=%d\n", - __func__, slsap_sel, dlsap_sel); - - /* Try to find LSAP among the unconnected LSAPs */ - lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, CONNECT_CMD, - irlmp->unconnected_lsaps); - - /* Maybe LSAP was already connected, so try one more time */ - if (!lsap) { - pr_debug("%s(), incoming connection for LSAP already connected\n", - __func__); - lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0, - self->lsaps); - } - } else - lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0, - self->lsaps); - - if (lsap == NULL) { - pr_debug("IrLMP, Sorry, no LSAP for received frame!\n"); - pr_debug("%s(), slsap_sel = %02x, dlsap_sel = %02x\n", - __func__, slsap_sel, dlsap_sel); - if (fp[0] & CONTROL_BIT) { - pr_debug("%s(), received control frame %02x\n", - __func__, fp[2]); - } else { - pr_debug("%s(), received data frame\n", __func__); - } - return; - } - - /* - * Check if we received a control frame? - */ - if (fp[0] & CONTROL_BIT) { - switch (fp[2]) { - case CONNECT_CMD: - lsap->lap = self; - irlmp_do_lsap_event(lsap, LM_CONNECT_INDICATION, skb); - break; - case CONNECT_CNF: - irlmp_do_lsap_event(lsap, LM_CONNECT_CONFIRM, skb); - break; - case DISCONNECT: - pr_debug("%s(), Disconnect indication!\n", - __func__); - irlmp_do_lsap_event(lsap, LM_DISCONNECT_INDICATION, - skb); - break; - case ACCESSMODE_CMD: - pr_debug("Access mode cmd not implemented!\n"); - break; - case ACCESSMODE_CNF: - pr_debug("Access mode cnf not implemented!\n"); - break; - default: - pr_debug("%s(), Unknown control frame %02x\n", - __func__, fp[2]); - break; - } - } else if (unreliable) { - /* Optimize and bypass the state machine if possible */ - if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY) - irlmp_udata_indication(lsap, skb); - else - irlmp_do_lsap_event(lsap, LM_UDATA_INDICATION, skb); - } else { - /* Optimize and bypass the state machine if possible */ - if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY) - irlmp_data_indication(lsap, skb); - else - irlmp_do_lsap_event(lsap, LM_DATA_INDICATION, skb); - } -} - -/* - * Function irlmp_link_unitdata_indication (self, skb) - * - * - * - */ -#ifdef CONFIG_IRDA_ULTRA -void irlmp_link_unitdata_indication(struct lap_cb *self, struct sk_buff *skb) -{ - struct lsap_cb *lsap; - __u8 slsap_sel; /* Source (this) LSAP address */ - __u8 dlsap_sel; /* Destination LSAP address */ - __u8 pid; /* Protocol identifier */ - __u8 *fp; - unsigned long flags; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - IRDA_ASSERT(skb->len > 2, return;); - - fp = skb->data; - - /* - * The next statements may be confusing, but we do this so that - * destination LSAP of received frame is source LSAP in our view - */ - slsap_sel = fp[0] & LSAP_MASK; - dlsap_sel = fp[1]; - pid = fp[2]; - - if (pid & 0x80) { - pr_debug("%s(), extension in PID not supp!\n", - __func__); - return; - } - - /* Check if frame is addressed to the connectionless LSAP */ - if ((slsap_sel != LSAP_CONNLESS) || (dlsap_sel != LSAP_CONNLESS)) { - pr_debug("%s(), dropping frame!\n", __func__); - return; - } - - /* Search the connectionless LSAP */ - spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags); - lsap = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps); - while (lsap != NULL) { - /* - * Check if source LSAP and dest LSAP selectors and PID match. - */ - if ((lsap->slsap_sel == slsap_sel) && - (lsap->dlsap_sel == dlsap_sel) && - (lsap->pid == pid)) - { - break; - } - lsap = (struct lsap_cb *) hashbin_get_next(irlmp->unconnected_lsaps); - } - spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); - - if (lsap) - irlmp_connless_data_indication(lsap, skb); - else { - pr_debug("%s(), found no matching LSAP!\n", __func__); - } -} -#endif /* CONFIG_IRDA_ULTRA */ - -/* - * Function irlmp_link_disconnect_indication (reason, userdata) - * - * IrLAP has disconnected - * - */ -void irlmp_link_disconnect_indication(struct lap_cb *lap, - struct irlap_cb *irlap, - LAP_REASON reason, - struct sk_buff *skb) -{ - IRDA_ASSERT(lap != NULL, return;); - IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); - - lap->reason = reason; - lap->daddr = DEV_ADDR_ANY; - - /* FIXME: must do something with the skb if any */ - - /* - * Inform station state machine - */ - irlmp_do_lap_event(lap, LM_LAP_DISCONNECT_INDICATION, NULL); -} - -/* - * Function irlmp_link_connect_indication (qos) - * - * Incoming LAP connection! - * - */ -void irlmp_link_connect_indication(struct lap_cb *self, __u32 saddr, - __u32 daddr, struct qos_info *qos, - struct sk_buff *skb) -{ - /* Copy QoS settings for this session */ - self->qos = qos; - - /* Update destination device address */ - self->daddr = daddr; - IRDA_ASSERT(self->saddr == saddr, return;); - - irlmp_do_lap_event(self, LM_LAP_CONNECT_INDICATION, skb); -} - -/* - * Function irlmp_link_connect_confirm (qos) - * - * LAP connection confirmed! - * - */ -void irlmp_link_connect_confirm(struct lap_cb *self, struct qos_info *qos, - struct sk_buff *skb) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - IRDA_ASSERT(qos != NULL, return;); - - /* Don't need use the skb for now */ - - /* Copy QoS settings for this session */ - self->qos = qos; - - irlmp_do_lap_event(self, LM_LAP_CONNECT_CONFIRM, NULL); -} - -/* - * Function irlmp_link_discovery_indication (self, log) - * - * Device is discovering us - * - * It's not an answer to our own discoveries, just another device trying - * to perform discovery, but we don't want to miss the opportunity - * to exploit this information, because : - * o We may not actively perform discovery (just passive discovery) - * o This type of discovery is much more reliable. In some cases, it - * seem that less than 50% of our discoveries get an answer, while - * we always get ~100% of these. - * o Make faster discovery, statistically divide time of discovery - * events by 2 (important for the latency aspect and user feel) - * o Even is we do active discovery, the other node might not - * answer our discoveries (ex: Palm). The Palm will just perform - * one active discovery and connect directly to us. - * - * However, when both devices discover each other, they might attempt to - * connect to each other following the discovery event, and it would create - * collisions on the medium (SNRM battle). - * The "fix" for that is to disable all connection requests in IrLAP - * for 100ms after a discovery indication by setting the media_busy flag. - * Previously, we used to postpone the event which was quite ugly. Now - * that IrLAP takes care of this problem, just pass the event up... - * - * Jean II - */ -void irlmp_link_discovery_indication(struct lap_cb *self, - discovery_t *discovery) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - - /* Add to main log, cleanup */ - irlmp_add_discovery(irlmp->cachelog, discovery); - - /* Just handle it the same way as a discovery confirm, - * bypass the LM_LAP state machine (see below) */ - irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_PASSIVE); -} - -/* - * Function irlmp_link_discovery_confirm (self, log) - * - * Called by IrLAP with a list of discoveries after the discovery - * request has been carried out. A NULL log is received if IrLAP - * was unable to carry out the discovery request - * - */ -void irlmp_link_discovery_confirm(struct lap_cb *self, hashbin_t *log) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); - - /* Add to main log, cleanup */ - irlmp_add_discovery_log(irlmp->cachelog, log); - - /* Propagate event to various LSAPs registered for it. - * We bypass the LM_LAP state machine because - * 1) We do it regardless of the LM_LAP state - * 2) It doesn't affect the LM_LAP state - * 3) Faster, slimer, simpler, ... - * Jean II */ - irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_ACTIVE); -} - -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP -static inline void irlmp_update_cache(struct lap_cb *lap, - struct lsap_cb *lsap) -{ - /* Prevent concurrent read to get garbage */ - lap->cache.valid = FALSE; - /* Update cache entry */ - lap->cache.dlsap_sel = lsap->dlsap_sel; - lap->cache.slsap_sel = lsap->slsap_sel; - lap->cache.lsap = lsap; - lap->cache.valid = TRUE; -} -#endif - -/* - * Function irlmp_find_handle (self, dlsap_sel, slsap_sel, status, queue) - * - * Find handle associated with destination and source LSAP - * - * Any IrDA connection (LSAP/TSAP) is uniquely identified by - * 3 parameters, the local lsap, the remote lsap and the remote address. - * We may initiate multiple connections to the same remote service - * (they will have different local lsap), a remote device may initiate - * multiple connections to the same local service (they will have - * different remote lsap), or multiple devices may connect to the same - * service and may use the same remote lsap (and they will have - * different remote address). - * So, where is the remote address ? Each LAP connection is made with - * a single remote device, so imply a specific remote address. - * Jean II - */ -static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap_sel, - __u8 slsap_sel, int status, - hashbin_t *queue) -{ - struct lsap_cb *lsap; - unsigned long flags; - - /* - * Optimize for the common case. We assume that the last frame - * received is in the same connection as the last one, so check in - * cache first to avoid the linear search - */ -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - if ((self->cache.valid) && - (self->cache.slsap_sel == slsap_sel) && - (self->cache.dlsap_sel == dlsap_sel)) - { - return self->cache.lsap; - } -#endif - - spin_lock_irqsave(&queue->hb_spinlock, flags); - - lsap = (struct lsap_cb *) hashbin_get_first(queue); - while (lsap != NULL) { - /* - * If this is an incoming connection, then the destination - * LSAP selector may have been specified as LM_ANY so that - * any client can connect. In that case we only need to check - * if the source LSAP (in our view!) match! - */ - if ((status == CONNECT_CMD) && - (lsap->slsap_sel == slsap_sel) && - (lsap->dlsap_sel == LSAP_ANY)) { - /* This is where the dest lsap sel is set on incoming - * lsaps */ - lsap->dlsap_sel = dlsap_sel; - break; - } - /* - * Check if source LSAP and dest LSAP selectors match. - */ - if ((lsap->slsap_sel == slsap_sel) && - (lsap->dlsap_sel == dlsap_sel)) - break; - - lsap = (struct lsap_cb *) hashbin_get_next(queue); - } -#ifdef CONFIG_IRDA_CACHE_LAST_LSAP - if(lsap) - irlmp_update_cache(self, lsap); -#endif - spin_unlock_irqrestore(&queue->hb_spinlock, flags); - - /* Return what we've found or NULL */ - return lsap; -} diff --git a/net/irda/irmod.c b/net/irda/irmod.c deleted file mode 100644 index c5e35b85c477..000000000000 --- a/net/irda/irmod.c +++ /dev/null @@ -1,199 +0,0 @@ -/********************************************************************* - * - * Filename: irmod.c - * Version: 0.9 - * Description: IrDA stack main entry points - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Mon Dec 15 13:55:39 1997 - * Modified at: Wed Jan 5 15:12:41 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1997, 1999-2000 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -/* - * This file contains the main entry points of the IrDA stack. - * They are in this file and not af_irda.c because some developpers - * are using the IrDA stack without the socket API (compiling out - * af_irda.c). - * Jean II - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> - -#include <net/irda/irda.h> -#include <net/irda/irmod.h> /* notify_t */ -#include <net/irda/irlap.h> /* irlap_init */ -#include <net/irda/irlmp.h> /* irlmp_init */ -#include <net/irda/iriap.h> /* iriap_init */ -#include <net/irda/irttp.h> /* irttp_init */ -#include <net/irda/irda_device.h> /* irda_device_init */ - -/* Packet type handler. - * Tell the kernel how IrDA packets should be handled. - */ -static struct packet_type irda_packet_type __read_mostly = { - .type = cpu_to_be16(ETH_P_IRDA), - .func = irlap_driver_rcv, /* Packet type handler irlap_frame.c */ -}; - -/* - * Function irda_notify_init (notify) - * - * Used for initializing the notify structure - * - */ -void irda_notify_init(notify_t *notify) -{ - notify->data_indication = NULL; - notify->udata_indication = NULL; - notify->connect_confirm = NULL; - notify->connect_indication = NULL; - notify->disconnect_indication = NULL; - notify->flow_indication = NULL; - notify->status_indication = NULL; - notify->instance = NULL; - strlcpy(notify->name, "Unknown", sizeof(notify->name)); -} -EXPORT_SYMBOL(irda_notify_init); - -/* - * Function irda_init (void) - * - * Protocol stack initialisation entry point. - * Initialise the various components of the IrDA stack - */ -static int __init irda_init(void) -{ - int ret = 0; - - /* Lower layer of the stack */ - irlmp_init(); - irlap_init(); - - /* Driver/dongle support */ - irda_device_init(); - - /* Higher layers of the stack */ - iriap_init(); - irttp_init(); - ret = irsock_init(); - if (ret < 0) - goto out_err_1; - - /* Add IrDA packet type (Start receiving packets) */ - dev_add_pack(&irda_packet_type); - - /* External APIs */ -#ifdef CONFIG_PROC_FS - irda_proc_register(); -#endif -#ifdef CONFIG_SYSCTL - ret = irda_sysctl_register(); - if (ret < 0) - goto out_err_2; -#endif - - ret = irda_nl_register(); - if (ret < 0) - goto out_err_3; - - return 0; - - out_err_3: -#ifdef CONFIG_SYSCTL - irda_sysctl_unregister(); - out_err_2: -#endif -#ifdef CONFIG_PROC_FS - irda_proc_unregister(); -#endif - - /* Remove IrDA packet type (stop receiving packets) */ - dev_remove_pack(&irda_packet_type); - - /* Remove higher layers */ - irsock_cleanup(); - out_err_1: - irttp_cleanup(); - iriap_cleanup(); - - /* Remove lower layers */ - irda_device_cleanup(); - irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */ - - /* Remove middle layer */ - irlmp_cleanup(); - - - return ret; -} - -/* - * Function irda_cleanup (void) - * - * Protocol stack cleanup/removal entry point. - * Cleanup the various components of the IrDA stack - */ -static void __exit irda_cleanup(void) -{ - /* Remove External APIs */ - irda_nl_unregister(); - -#ifdef CONFIG_SYSCTL - irda_sysctl_unregister(); -#endif -#ifdef CONFIG_PROC_FS - irda_proc_unregister(); -#endif - - /* Remove IrDA packet type (stop receiving packets) */ - dev_remove_pack(&irda_packet_type); - - /* Remove higher layers */ - irsock_cleanup(); - irttp_cleanup(); - iriap_cleanup(); - - /* Remove lower layers */ - irda_device_cleanup(); - irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */ - - /* Remove middle layer */ - irlmp_cleanup(); -} - -/* - * The IrDA stack must be initialised *before* drivers get initialised, - * and *before* higher protocols (IrLAN/IrCOMM/IrNET) get initialised, - * otherwise bad things will happen (hashbins will be NULL for example). - * Those modules are at module_init()/device_initcall() level. - * - * On the other hand, it needs to be initialised *after* the basic - * networking, the /proc/net filesystem and sysctl module. Those are - * currently initialised in .../init/main.c (before initcalls). - * Also, IrDA drivers needs to be initialised *after* the random number - * generator (main stack and higher layer init don't need it anymore). - * - * Jean II - */ -subsys_initcall(irda_init); -module_exit(irda_cleanup); - -MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> & Jean Tourrilhes <jt@hpl.hp.com>"); -MODULE_DESCRIPTION("The Linux IrDA Protocol Stack"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_NETPROTO(PF_IRDA); diff --git a/net/irda/irnet/Kconfig b/net/irda/irnet/Kconfig deleted file mode 100644 index 28c557f0fdd2..000000000000 --- a/net/irda/irnet/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -config IRNET - tristate "IrNET protocol" - depends on IRDA && PPP - help - Say Y here if you want to build support for the IrNET protocol. - To compile it as a module, choose M here: the module will be - called irnet. IrNET is a PPP driver, so you will also need a - working PPP subsystem (driver, daemon and config)... - - IrNET is an alternate way to transfer TCP/IP traffic over IrDA. It - uses synchronous PPP over a set of point to point IrDA sockets. You - can use it between Linux machine or with W2k. - diff --git a/net/irda/irnet/Makefile b/net/irda/irnet/Makefile deleted file mode 100644 index 61c365c8a2a0..000000000000 --- a/net/irda/irnet/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the Linux IrDA IrNET protocol layer. -# - -obj-$(CONFIG_IRNET) += irnet.o - -irnet-y := irnet_ppp.o irnet_irda.o diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h deleted file mode 100644 index 9d451f8ed47a..000000000000 --- a/net/irda/irnet/irnet.h +++ /dev/null @@ -1,522 +0,0 @@ -/* - * IrNET protocol module : Synchronous PPP over an IrDA socket. - * - * Jean II - HPL `00 - <jt@hpl.hp.com> - * - * This file contains definitions and declarations global to the IrNET module, - * all grouped in one place... - * This file is a *private* header, so other modules don't want to know - * what's in there... - * - * Note : as most part of the Linux kernel, this module is available - * under the GNU General Public License (GPL). - */ - -#ifndef IRNET_H -#define IRNET_H - -/************************** DOCUMENTATION ***************************/ -/* - * What is IrNET - * ------------- - * IrNET is a protocol allowing to carry TCP/IP traffic between two - * IrDA peers in an efficient fashion. It is a thin layer, passing PPP - * packets to IrTTP and vice versa. It uses PPP in synchronous mode, - * because IrTTP offer a reliable sequenced packet service (as opposed - * to a byte stream). In fact, you could see IrNET as carrying TCP/IP - * in a IrDA socket, using PPP to provide the glue. - * - * The main difference with traditional PPP over IrCOMM is that we - * avoid the framing and serial emulation which are a performance - * bottleneck. It also allows multipoint communications in a sensible - * fashion. - * - * The main difference with IrLAN is that we use PPP for the link - * management, which is more standard, interoperable and flexible than - * the IrLAN protocol. For example, PPP adds authentication, - * encryption, compression, header compression and automated routing - * setup. And, as IrNET let PPP do the hard work, the implementation - * is much simpler than IrLAN. - * - * The Linux implementation - * ------------------------ - * IrNET is written on top of the Linux-IrDA stack, and interface with - * the generic Linux PPP driver. Because IrNET depend on recent - * changes of the PPP driver interface, IrNET will work only with very - * recent kernel (2.3.99-pre6 and up). - * - * The present implementation offer the following features : - * o simple user interface using pppd - * o efficient implementation (interface directly to PPP and IrTTP) - * o addressing (you can specify the name of the IrNET recipient) - * o multipoint operation (limited by IrLAP specification) - * o information in /proc/net/irda/irnet - * o IrNET events on /dev/irnet (for user space daemon) - * o IrNET daemon (irnetd) to automatically handle incoming requests - * o Windows 2000 compatibility (tested, but need more work) - * Currently missing : - * o Lot's of testing (that's your job) - * o Connection retries (may be too hard to do) - * o Check pppd persist mode - * o User space daemon (to automatically handle incoming requests) - * - * The setup is not currently the most easy, but this should get much - * better when everything will get integrated... - * - * Acknowledgements - * ---------------- - * This module is based on : - * o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras - * o The IrLAN protocol (irlan_common/XXX) by Dag Brattli - * o The IrSock interface (af_irda) by Dag Brattli - * o Some other bits from the kernel and my drivers... - * Infinite thanks to those brave souls for providing the infrastructure - * upon which IrNET is built. - * - * Thanks to all my colleagues in HP for helping me. In particular, - * thanks to Salil Pradhan and Bill Serra for W2k testing... - * Thanks to Luiz Magalhaes for irnetd and much testing... - * - * Thanks to Alan Cox for answering lot's of my stupid questions, and - * to Paul Mackerras answering my questions on how to best integrate - * IrNET and pppd. - * - * Jean II - * - * Note on some implementations choices... - * ------------------------------------ - * 1) Direct interface vs tty/socket - * I could have used a tty interface to hook to ppp and use the full - * socket API to connect to IrDA. The code would have been easier to - * maintain, and maybe the code would have been smaller... - * Instead, we hook directly to ppp_generic and to IrTTP, which make - * things more complicated... - * - * The first reason is flexibility : this allow us to create IrNET - * instances on demand (no /dev/ircommX crap) and to allow linkname - * specification on pppd command line... - * - * Second reason is speed optimisation. If you look closely at the - * transmit and receive paths, you will notice that they are "super lean" - * (that's why they look ugly), with no function calls and as little data - * copy and modification as I could... - * - * 2) irnetd in user space - * irnetd is implemented in user space, which is necessary to call pppd. - * This also give maximum benefits in term of flexibility and customability, - * and allow to offer the event channel, useful for other stuff like debug. - * - * On the other hand, this require a loose coordination between the - * present module and irnetd. One critical area is how incoming request - * are handled. - * When irnet receive an incoming request, it send an event to irnetd and - * drop the incoming IrNET socket. - * irnetd start a pppd instance, which create a new IrNET socket. This new - * socket is then connected in the originating node to the pppd instance. - * At this point, in the originating node, the first socket is closed. - * - * I admit, this is a bit messy and waste some resources. The alternative - * is caching incoming socket, and that's also quite messy and waste - * resources. - * We also make connection time slower. For example, on a 115 kb/s link it - * adds 60ms to the connection time (770 ms). However, this is slower than - * the time it takes to fire up pppd on my P133... - * - * - * History : - * ------- - * - * v1 - 15.5.00 - Jean II - * o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint) - * o control channel on /dev/irnet (set name/address) - * o event channel on /dev/irnet (for user space daemon) - * - * v2 - 5.6.00 - Jean II - * o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness... - * o Add DISCONNECT_TO event and rename DISCONNECT_FROM. - * o Set official device number alloaction on /dev/irnet - * - * v3 - 30.8.00 - Jean II - * o Update to latest Linux-IrDA changes : - * - queue_t => irda_queue_t - * o Update to ppp-2.4.0 : - * - move irda_irnet_connect from PPPIOCATTACH to TIOCSETD - * o Add EXPIRE event (depend on new IrDA-Linux patch) - * o Switch from `hashbin_remove' to `hashbin_remove_this' to fix - * a multilink bug... (depend on new IrDA-Linux patch) - * o fix a self->daddr to self->raddr in irda_irnet_connect to fix - * another multilink bug (darn !) - * o Remove LINKNAME_IOCTL cruft - * - * v3b - 31.8.00 - Jean II - * o Dump discovery log at event channel startup - * - * v4 - 28.9.00 - Jean II - * o Fix interaction between poll/select and dump discovery log - * o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch) - * o Add IRNET_NOANSWER_FROM event (mostly to help support) - * o Release flow control in disconnect_indication - * o Block packets while connecting (speed up connections) - * - * v5 - 11.01.01 - Jean II - * o Init self->max_header_size, just in case... - * o Set up ap->chan.hdrlen, to get zero copy on tx side working. - * o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state - * Thanks to Christian Gennerat for finding this bug ! - * --- - * o Declare the proper MTU/MRU that we can support - * (but PPP doesn't read the MTU value :-() - * o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid - * disabling and enabling irq twice - * - * v6 - 31.05.01 - Jean II - * o Print source address in Found, Discovery, Expiry & Request events - * o Print requested source address in /proc/net/irnet - * o Change control channel input. Allow multiple commands in one line. - * o Add saddr command to change ap->rsaddr (and use that in IrDA) - * --- - * o Make the IrDA connection procedure totally asynchronous. - * Heavy rewrite of the IAS query code and the whole connection - * procedure. Now, irnet_connect() no longer need to be called from - * a process context... - * o Enable IrDA connect retries in ppp_irnet_send(). The good thing - * is that IrDA connect retries are directly driven by PPP LCP - * retries (we retry for each LCP packet), so that everything - * is transparently controlled from pppd lcp-max-configure. - * o Add ttp_connect flag to prevent rentry on the connect procedure - * o Test and fixups to eliminate side effects of retries - * - * v7 - 22.08.01 - Jean II - * o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY" - * o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the - * asynchronous IAS query, self->tsap is NULL when PPP send the - * first packet. This was preventing "connect-delay 0" to work. - * Change the test in ppp_irnet_send() to self->ttp_connect. - * - * v8 - 1.11.01 - Jean II - * o Tighten the use of self->ttp_connect and self->ttp_open to - * prevent various race conditions. - * o Avoid leaking discovery log and skb - * o Replace "self" with "server" in irnet_connect_indication() to - * better detect cut'n'paste error ;-) - * - * v9 - 29.11.01 - Jean II - * o Fix event generation in disconnect indication that I broke in v8 - * It was always generation "No-Answer" because I was testing ttp_open - * just after clearing it. *blush*. - * o Use newly created irttp_listen() to fix potential crash when LAP - * destroyed before irnet module removed. - * - * v10 - 4.3.2 - Jean II - * o When receiving a disconnect indication, don't reenable the - * PPP Tx queue, this will trigger a reconnect. Instead, close - * the channel, which will kill pppd... - * - * v11 - 20.3.02 - Jean II - * o Oops ! v10 fix disabled IrNET retries and passive behaviour. - * Better fix in irnet_disconnect_indication() : - * - if connected, kill pppd via hangup. - * - if not connected, reenable ppp Tx, which trigger IrNET retry. - * - * v12 - 10.4.02 - Jean II - * o Fix race condition in irnet_connect_indication(). - * If the socket was already trying to connect, drop old connection - * and use new one only if acting as primary. See comments. - * - * v13 - 30.5.02 - Jean II - * o Update module init code - * - * v14 - 20.2.03 - Jean II - * o Add discovery hint bits in the control channel. - * o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner - * - * v15 - 7.4.03 - Jean II - * o Replace spin_lock_irqsave() with spin_lock_bh() so that we can - * use ppp_unit_number(). It's probably also better overall... - * o Disable call to ppp_unregister_channel(), because we can't do it. - */ - -/***************************** INCLUDES *****************************/ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/skbuff.h> -#include <linux/tty.h> -#include <linux/proc_fs.h> -#include <linux/netdevice.h> -#include <linux/poll.h> -#include <linux/capability.h> -#include <linux/ctype.h> /* isspace() */ -#include <linux/string.h> /* skip_spaces() */ -#include <linux/uaccess.h> -#include <linux/init.h> - -#include <linux/ppp_defs.h> -#include <linux/ppp-ioctl.h> -#include <linux/ppp_channel.h> - -#include <net/irda/irda.h> -#include <net/irda/iriap.h> -#include <net/irda/irias_object.h> -#include <net/irda/irlmp.h> -#include <net/irda/irttp.h> -#include <net/irda/discovery.h> - -/***************************** OPTIONS *****************************/ -/* - * Define or undefine to compile or not some optional part of the - * IrNET driver... - * Note : the present defaults make sense, play with that at your - * own risk... - */ -/* IrDA side of the business... */ -#define DISCOVERY_NOMASK /* To enable W2k compatibility... */ -#define ADVERTISE_HINT /* Advertise IrLAN hint bit */ -#define ALLOW_SIMULT_CONNECT /* This seem to work, cross fingers... */ -#define DISCOVERY_EVENTS /* Query the discovery log to post events */ -#define INITIAL_DISCOVERY /* Dump current discovery log as events */ -#undef STREAM_COMPAT /* Not needed - potentially messy */ -#undef CONNECT_INDIC_KICK /* Might mess IrDA, not needed */ -#undef FAIL_SEND_DISCONNECT /* Might mess IrDA, not needed */ -#undef PASS_CONNECT_PACKETS /* Not needed ? Safe */ -#undef MISSING_PPP_API /* Stuff I wish I could do */ - -/* PPP side of the business */ -#define BLOCK_WHEN_CONNECT /* Block packets when connecting */ -#define CONNECT_IN_SEND /* Retry IrDA connection procedure */ -#undef FLUSH_TO_PPP /* Not sure about this one, let's play safe */ -#undef SECURE_DEVIRNET /* Bah... */ - -/****************************** DEBUG ******************************/ - -/* - * This set of flags enable and disable all the various warning, - * error and debug message of this driver. - * Each section can be enabled and disabled independently - */ -/* In the PPP part */ -#define DEBUG_CTRL_TRACE 0 /* Control channel */ -#define DEBUG_CTRL_INFO 0 /* various info */ -#define DEBUG_CTRL_ERROR 1 /* problems */ -#define DEBUG_FS_TRACE 0 /* filesystem callbacks */ -#define DEBUG_FS_INFO 0 /* various info */ -#define DEBUG_FS_ERROR 1 /* problems */ -#define DEBUG_PPP_TRACE 0 /* PPP related functions */ -#define DEBUG_PPP_INFO 0 /* various info */ -#define DEBUG_PPP_ERROR 1 /* problems */ -#define DEBUG_MODULE_TRACE 0 /* module insertion/removal */ -#define DEBUG_MODULE_ERROR 1 /* problems */ - -/* In the IrDA part */ -#define DEBUG_IRDA_SR_TRACE 0 /* IRDA subroutines */ -#define DEBUG_IRDA_SR_INFO 0 /* various info */ -#define DEBUG_IRDA_SR_ERROR 1 /* problems */ -#define DEBUG_IRDA_SOCK_TRACE 0 /* IRDA main socket functions */ -#define DEBUG_IRDA_SOCK_INFO 0 /* various info */ -#define DEBUG_IRDA_SOCK_ERROR 1 /* problems */ -#define DEBUG_IRDA_SERV_TRACE 0 /* The IrNET server */ -#define DEBUG_IRDA_SERV_INFO 0 /* various info */ -#define DEBUG_IRDA_SERV_ERROR 1 /* problems */ -#define DEBUG_IRDA_TCB_TRACE 0 /* IRDA IrTTP callbacks */ -#define DEBUG_IRDA_CB_INFO 0 /* various info */ -#define DEBUG_IRDA_CB_ERROR 1 /* problems */ -#define DEBUG_IRDA_OCB_TRACE 0 /* IRDA other callbacks */ -#define DEBUG_IRDA_OCB_INFO 0 /* various info */ -#define DEBUG_IRDA_OCB_ERROR 1 /* problems */ - -#define DEBUG_ASSERT 0 /* Verify all assertions */ - -/* - * These are the macros we are using to actually print the debug - * statements. Don't look at it, it's ugly... - * - * One of the trick is that, as the DEBUG_XXX are constant, the - * compiler will optimise away the if() in all cases. - */ -/* All error messages (will show up in the normal logs) */ -#define DERROR(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_INFO "irnet: %s(): " format, __func__ , ##args);} - -/* Normal debug message (will show up in /var/log/debug) */ -#define DEBUG(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: %s(): " format, __func__ , ##args);} - -/* Entering a function (trace) */ -#define DENTER(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: -> %s" format, __func__ , ##args);} - -/* Entering and exiting a function in one go (trace) */ -#define DPASS(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: <>%s" format, __func__ , ##args);} - -/* Exiting a function (trace) */ -#define DEXIT(dbg, format, args...) \ - {if(DEBUG_##dbg) \ - printk(KERN_DEBUG "irnet: <-%s()" format, __func__ , ##args);} - -/* Exit a function with debug */ -#define DRETURN(ret, dbg, args...) \ - {DEXIT(dbg, ": " args);\ - return ret; } - -/* Exit a function on failed condition */ -#define DABORT(cond, ret, dbg, args...) \ - {if(cond) {\ - DERROR(dbg, args);\ - return ret; }} - -/* Invalid assertion, print out an error and exit... */ -#define DASSERT(cond, ret, dbg, args...) \ - {if((DEBUG_ASSERT) && !(cond)) {\ - DERROR(dbg, "Invalid assertion: " args);\ - return ret; }} - -/************************ CONSTANTS & MACROS ************************/ - -/* Paranoia */ -#define IRNET_MAGIC 0xB00754 - -/* Number of control events in the control channel buffer... */ -#define IRNET_MAX_EVENTS 8 /* Should be more than enough... */ - -/****************************** TYPES ******************************/ - -/* - * This is the main structure where we store all the data pertaining to - * one instance of irnet. - * Note : in irnet functions, a pointer this structure is usually called - * "ap" or "self". If the code is borrowed from the IrDA stack, it tend - * to be called "self", and if it is borrowed from the PPP driver it is - * "ap". Apart from that, it's exactly the same structure ;-) - */ -typedef struct irnet_socket -{ - /* ------------------- Instance management ------------------- */ - /* We manage a linked list of IrNET socket instances */ - irda_queue_t q; /* Must be first - for hasbin */ - int magic; /* Paranoia */ - - /* --------------------- FileSystem part --------------------- */ - /* "pppd" interact directly with us on a /dev/ file */ - struct file * file; /* File descriptor of this instance */ - /* TTY stuff - to keep "pppd" happy */ - struct ktermios termios; /* Various tty flags */ - /* Stuff for the control channel */ - int event_index; /* Last read in the event log */ - - /* ------------------------- PPP part ------------------------- */ - /* We interface directly to the ppp_generic driver in the kernel */ - int ppp_open; /* registered with ppp_generic */ - struct ppp_channel chan; /* Interface to generic ppp layer */ - - int mru; /* Max size of PPP payload */ - u32 xaccm[8]; /* Asynchronous character map (just */ - u32 raccm; /* to please pppd - dummy) */ - unsigned int flags; /* PPP flags (compression, ...) */ - unsigned int rbits; /* Unused receive flags ??? */ - struct work_struct disconnect_work; /* Process context disconnection */ - /* ------------------------ IrTTP part ------------------------ */ - /* We create a pseudo "socket" over the IrDA tranport */ - unsigned long ttp_open; /* Set when IrTTP is ready */ - unsigned long ttp_connect; /* Set when IrTTP is connecting */ - struct tsap_cb * tsap; /* IrTTP instance (the connection) */ - - char rname[NICKNAME_MAX_LEN + 1]; - /* IrDA nickname of destination */ - __u32 rdaddr; /* Requested peer IrDA address */ - __u32 rsaddr; /* Requested local IrDA address */ - __u32 daddr; /* actual peer IrDA address */ - __u32 saddr; /* my local IrDA address */ - __u8 dtsap_sel; /* Remote TSAP selector */ - __u8 stsap_sel; /* Local TSAP selector */ - - __u32 max_sdu_size_rx;/* Socket parameters used for IrTTP */ - __u32 max_sdu_size_tx; - __u32 max_data_size; - __u8 max_header_size; - LOCAL_FLOW tx_flow; /* State of the Tx path in IrTTP */ - - /* ------------------- IrLMP and IrIAS part ------------------- */ - /* Used for IrDA Discovery and socket name resolution */ - void * ckey; /* IrLMP client handle */ - __u16 mask; /* Hint bits mask (filter discov.)*/ - int nslots; /* Number of slots for discovery */ - - struct iriap_cb * iriap; /* Used to query remote IAS */ - int errno; /* status of the IAS query */ - - /* -------------------- Discovery log part -------------------- */ - /* Used by initial discovery on the control channel - * and by irnet_discover_daddr_and_lsap_sel() */ - struct irda_device_info *discoveries; /* Copy of the discovery log */ - int disco_index; /* Last read in the discovery log */ - int disco_number; /* Size of the discovery log */ - - struct mutex lock; - -} irnet_socket; - -/* - * This is the various event that we will generate on the control channel - */ -typedef enum irnet_event -{ - IRNET_DISCOVER, /* New IrNET node discovered */ - IRNET_EXPIRE, /* IrNET node expired */ - IRNET_CONNECT_TO, /* IrNET socket has connected to other node */ - IRNET_CONNECT_FROM, /* Other node has connected to IrNET socket */ - IRNET_REQUEST_FROM, /* Non satisfied connection request */ - IRNET_NOANSWER_FROM, /* Failed connection request */ - IRNET_BLOCKED_LINK, /* Link (IrLAP) is blocked for > 3s */ - IRNET_DISCONNECT_FROM, /* IrNET socket has disconnected */ - IRNET_DISCONNECT_TO /* Closing IrNET socket */ -} irnet_event; - -/* - * This is the storage for an event and its arguments - */ -typedef struct irnet_log -{ - irnet_event event; - int unit; - __u32 saddr; - __u32 daddr; - char name[NICKNAME_MAX_LEN + 1]; /* 21 + 1 */ - __u16_host_order hints; /* Discovery hint bits */ -} irnet_log; - -/* - * This is the storage for all events and related stuff... - */ -typedef struct irnet_ctrl_channel -{ - irnet_log log[IRNET_MAX_EVENTS]; /* Event log */ - int index; /* Current index in log */ - spinlock_t spinlock; /* Serialize access to the event log */ - wait_queue_head_t rwait; /* processes blocked on read (or poll) */ -} irnet_ctrl_channel; - -/**************************** PROTOTYPES ****************************/ -/* - * Global functions of the IrNET module - * Note : we list here also functions called from one file to the other. - */ - -/* -------------------------- IRDA PART -------------------------- */ -int irda_irnet_create(irnet_socket *); /* Initialise an IrNET socket */ -int irda_irnet_connect(irnet_socket *); /* Try to connect over IrDA */ -void irda_irnet_destroy(irnet_socket *); /* Teardown an IrNET socket */ -int irda_irnet_init(void); /* Initialise IrDA part of IrNET */ -void irda_irnet_cleanup(void); /* Teardown IrDA part of IrNET */ - -/**************************** VARIABLES ****************************/ - -/* Control channel stuff - allocated in irnet_irda.h */ -extern struct irnet_ctrl_channel irnet_events; - -#endif /* IRNET_H */ diff --git a/net/irda/irnet/irnet_irda.c b/net/irda/irnet/irnet_irda.c deleted file mode 100644 index e390bceeb2f8..000000000000 --- a/net/irda/irnet/irnet_irda.c +++ /dev/null @@ -1,1885 +0,0 @@ -/* - * IrNET protocol module : Synchronous PPP over an IrDA socket. - * - * Jean II - HPL `00 - <jt@hpl.hp.com> - * - * This file implement the IRDA interface of IrNET. - * Basically, we sit on top of IrTTP. We set up IrTTP, IrIAS properly, - * and exchange frames with IrTTP. - */ - -#include "irnet_irda.h" /* Private header */ -#include <linux/sched.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <asm/unaligned.h> - -/* - * PPP disconnect work: we need to make sure we're in - * process context when calling ppp_unregister_channel(). - */ -static void irnet_ppp_disconnect(struct work_struct *work) -{ - irnet_socket * self = - container_of(work, irnet_socket, disconnect_work); - - if (self == NULL) - return; - /* - * If we were connected, cleanup & close the PPP - * channel, which will kill pppd (hangup) and the rest. - */ - if (self->ppp_open && !self->ttp_open && !self->ttp_connect) { - ppp_unregister_channel(&self->chan); - self->ppp_open = 0; - } -} - -/************************* CONTROL CHANNEL *************************/ -/* - * When ppp is not active, /dev/irnet act as a control channel. - * Writing allow to set up the IrDA destination of the IrNET channel, - * and any application may be read events happening on IrNET... - */ - -/*------------------------------------------------------------------*/ -/* - * Post an event to the control channel... - * Put the event in the log, and then wait all process blocked on read - * so they can read the log... - */ -static void -irnet_post_event(irnet_socket * ap, - irnet_event event, - __u32 saddr, - __u32 daddr, - char * name, - __u16 hints) -{ - int index; /* In the log */ - - DENTER(CTRL_TRACE, "(ap=0x%p, event=%d, daddr=%08x, name=``%s'')\n", - ap, event, daddr, name); - - /* Protect this section via spinlock. - * Note : as we are the only event producer, we only need to exclude - * ourself when touching the log, which is nice and easy. - */ - spin_lock_bh(&irnet_events.spinlock); - - /* Copy the event in the log */ - index = irnet_events.index; - irnet_events.log[index].event = event; - irnet_events.log[index].daddr = daddr; - irnet_events.log[index].saddr = saddr; - /* Try to copy IrDA nickname */ - if(name) - strcpy(irnet_events.log[index].name, name); - else - irnet_events.log[index].name[0] = '\0'; - /* Copy hints */ - irnet_events.log[index].hints.word = hints; - /* Try to get ppp unit number */ - if((ap != (irnet_socket *) NULL) && (ap->ppp_open)) - irnet_events.log[index].unit = ppp_unit_number(&ap->chan); - else - irnet_events.log[index].unit = -1; - - /* Increment the index - * Note that we increment the index only after the event is written, - * to make sure that the readers don't get garbage... */ - irnet_events.index = (index + 1) % IRNET_MAX_EVENTS; - - DEBUG(CTRL_INFO, "New event index is %d\n", irnet_events.index); - - /* Spin lock end */ - spin_unlock_bh(&irnet_events.spinlock); - - /* Now : wake up everybody waiting for events... */ - wake_up_interruptible_all(&irnet_events.rwait); - - DEXIT(CTRL_TRACE, "\n"); -} - -/************************* IRDA SUBROUTINES *************************/ -/* - * These are a bunch of subroutines called from other functions - * down there, mostly common code or to improve readability... - * - * Note : we duplicate quite heavily some routines of af_irda.c, - * because our input structure (self) is quite different - * (struct irnet instead of struct irda_sock), which make sharing - * the same code impossible (at least, without templates). - */ - -/*------------------------------------------------------------------*/ -/* - * Function irda_open_tsap (self) - * - * Open local Transport Service Access Point (TSAP) - * - * Create a IrTTP instance for us and set all the IrTTP callbacks. - */ -static inline int -irnet_open_tsap(irnet_socket * self) -{ - notify_t notify; /* Callback structure */ - - DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); - - DABORT(self->tsap != NULL, -EBUSY, IRDA_SR_ERROR, "Already busy !\n"); - - /* Initialize IrTTP callbacks to be used by the IrDA stack */ - irda_notify_init(¬ify); - notify.connect_confirm = irnet_connect_confirm; - notify.connect_indication = irnet_connect_indication; - notify.disconnect_indication = irnet_disconnect_indication; - notify.data_indication = irnet_data_indication; - /*notify.udata_indication = NULL;*/ - notify.flow_indication = irnet_flow_indication; - notify.status_indication = irnet_status_indication; - notify.instance = self; - strlcpy(notify.name, IRNET_NOTIFY_NAME, sizeof(notify.name)); - - /* Open an IrTTP instance */ - self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, - ¬ify); - DABORT(self->tsap == NULL, -ENOMEM, - IRDA_SR_ERROR, "Unable to allocate TSAP !\n"); - - /* Remember which TSAP selector we actually got */ - self->stsap_sel = self->tsap->stsap_sel; - - DEXIT(IRDA_SR_TRACE, " - tsap=0x%p, sel=0x%X\n", - self->tsap, self->stsap_sel); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_ias_to_tsap (self, result, value) - * - * Examine an IAS object and extract TSAP - * - * We do an IAP query to find the TSAP associated with the IrNET service. - * When IrIAP pass us the result of the query, this function look at - * the return values to check for failures and extract the TSAP if - * possible. - * Also deallocate value - * The failure is in self->errno - * Return TSAP or -1 - */ -static inline __u8 -irnet_ias_to_tsap(irnet_socket * self, - int result, - struct ias_value * value) -{ - __u8 dtsap_sel = 0; /* TSAP we are looking for */ - - DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); - - /* By default, no error */ - self->errno = 0; - - /* Check if request succeeded */ - switch(result) - { - /* Standard errors : service not available */ - case IAS_CLASS_UNKNOWN: - case IAS_ATTRIB_UNKNOWN: - DEBUG(IRDA_SR_INFO, "IAS object doesn't exist ! (%d)\n", result); - self->errno = -EADDRNOTAVAIL; - break; - - /* Other errors, most likely IrDA stack failure */ - default : - DEBUG(IRDA_SR_INFO, "IAS query failed ! (%d)\n", result); - self->errno = -EHOSTUNREACH; - break; - - /* Success : we got what we wanted */ - case IAS_SUCCESS: - break; - } - - /* Check what was returned to us */ - if(value != NULL) - { - /* What type of argument have we got ? */ - switch(value->type) - { - case IAS_INTEGER: - DEBUG(IRDA_SR_INFO, "result=%d\n", value->t.integer); - if(value->t.integer != -1) - /* Get the remote TSAP selector */ - dtsap_sel = value->t.integer; - else - self->errno = -EADDRNOTAVAIL; - break; - default: - self->errno = -EADDRNOTAVAIL; - DERROR(IRDA_SR_ERROR, "bad type ! (0x%X)\n", value->type); - break; - } - - /* Cleanup */ - irias_delete_value(value); - } - else /* value == NULL */ - { - /* Nothing returned to us - usually result != SUCCESS */ - if(!(self->errno)) - { - DERROR(IRDA_SR_ERROR, - "IrDA bug : result == SUCCESS && value == NULL\n"); - self->errno = -EHOSTUNREACH; - } - } - DEXIT(IRDA_SR_TRACE, "\n"); - - /* Return the TSAP */ - return dtsap_sel; -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_find_lsap_sel (self) - * - * Try to lookup LSAP selector in remote LM-IAS - * - * Basically, we start a IAP query, and then go to sleep. When the query - * return, irnet_getvalue_confirm will wake us up, and we can examine the - * result of the query... - * Note that in some case, the query fail even before we go to sleep, - * creating some races... - */ -static inline int -irnet_find_lsap_sel(irnet_socket * self) -{ - DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); - - /* This should not happen */ - DABORT(self->iriap, -EBUSY, IRDA_SR_ERROR, "busy with a previous query.\n"); - - /* Create an IAP instance, will be closed in irnet_getvalue_confirm() */ - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - irnet_getvalue_confirm); - - /* Treat unexpected signals as disconnect */ - self->errno = -EHOSTUNREACH; - - /* Query remote LM-IAS */ - iriap_getvaluebyclass_request(self->iriap, self->rsaddr, self->daddr, - IRNET_SERVICE_NAME, IRNET_IAS_VALUE); - - /* The above request is non-blocking. - * After a while, IrDA will call us back in irnet_getvalue_confirm() - * We will then call irnet_ias_to_tsap() and finish the - * connection procedure */ - - DEXIT(IRDA_SR_TRACE, "\n"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_connect_tsap (self) - * - * Initialise the TTP socket and initiate TTP connection - * - */ -static inline int -irnet_connect_tsap(irnet_socket * self) -{ - int err; - - DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); - - /* Open a local TSAP (an IrTTP instance) */ - err = irnet_open_tsap(self); - if(err != 0) - { - clear_bit(0, &self->ttp_connect); - DERROR(IRDA_SR_ERROR, "connect aborted!\n"); - return err; - } - - /* Connect to remote device */ - err = irttp_connect_request(self->tsap, self->dtsap_sel, - self->rsaddr, self->daddr, NULL, - self->max_sdu_size_rx, NULL); - if(err != 0) - { - clear_bit(0, &self->ttp_connect); - DERROR(IRDA_SR_ERROR, "connect aborted!\n"); - return err; - } - - /* The above call is non-blocking. - * After a while, the IrDA stack will either call us back in - * irnet_connect_confirm() or irnet_disconnect_indication() - * See you there ;-) */ - - DEXIT(IRDA_SR_TRACE, "\n"); - return err; -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_discover_next_daddr (self) - * - * Query the IrNET TSAP of the next device in the log. - * - * Used in the TSAP discovery procedure. - */ -static inline int -irnet_discover_next_daddr(irnet_socket * self) -{ - /* Close the last instance of IrIAP, and open a new one. - * We can't reuse the IrIAP instance in the IrIAP callback */ - if(self->iriap) - { - iriap_close(self->iriap); - self->iriap = NULL; - } - /* Create a new IAP instance */ - self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, - irnet_discovervalue_confirm); - if(self->iriap == NULL) - return -ENOMEM; - - /* Next discovery - before the call to avoid races */ - self->disco_index++; - - /* Check if we have one more address to try */ - if(self->disco_index < self->disco_number) - { - /* Query remote LM-IAS */ - iriap_getvaluebyclass_request(self->iriap, - self->discoveries[self->disco_index].saddr, - self->discoveries[self->disco_index].daddr, - IRNET_SERVICE_NAME, IRNET_IAS_VALUE); - /* The above request is non-blocking. - * After a while, IrDA will call us back in irnet_discovervalue_confirm() - * We will then call irnet_ias_to_tsap() and come back here again... */ - return 0; - } - else - return 1; -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_discover_daddr_and_lsap_sel (self) - * - * This try to find a device with the requested service. - * - * Initiate a TSAP discovery procedure. - * It basically look into the discovery log. For each address in the list, - * it queries the LM-IAS of the device to find if this device offer - * the requested service. - * If there is more than one node supporting the service, we complain - * to the user (it should move devices around). - * If we find one node which have the requested TSAP, we connect to it. - * - * This function just start the whole procedure. It request the discovery - * log and submit the first IAS query. - * The bulk of the job is handled in irnet_discovervalue_confirm() - * - * Note : this procedure fails if there is more than one device in range - * on the same dongle, because IrLMP doesn't disconnect the LAP when the - * last LSAP is closed. Moreover, we would need to wait the LAP - * disconnection... - */ -static inline int -irnet_discover_daddr_and_lsap_sel(irnet_socket * self) -{ - int ret; - - DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); - - /* Ask lmp for the current discovery log */ - self->discoveries = irlmp_get_discoveries(&self->disco_number, self->mask, - DISCOVERY_DEFAULT_SLOTS); - - /* Check if the we got some results */ - if(self->discoveries == NULL) - { - self->disco_number = -1; - clear_bit(0, &self->ttp_connect); - DRETURN(-ENETUNREACH, IRDA_SR_INFO, "No Cachelog...\n"); - } - DEBUG(IRDA_SR_INFO, "Got the log (0x%p), size is %d\n", - self->discoveries, self->disco_number); - - /* Start with the first discovery */ - self->disco_index = -1; - self->daddr = DEV_ADDR_ANY; - - /* This will fail if the log is empty - this is non-blocking */ - ret = irnet_discover_next_daddr(self); - if(ret) - { - /* Close IAP */ - if(self->iriap) - iriap_close(self->iriap); - self->iriap = NULL; - - /* Cleanup our copy of the discovery log */ - kfree(self->discoveries); - self->discoveries = NULL; - - clear_bit(0, &self->ttp_connect); - DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n"); - } - - /* Follow me in irnet_discovervalue_confirm() */ - - DEXIT(IRDA_SR_TRACE, "\n"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_dname_to_daddr (self) - * - * Convert an IrDA nickname to a valid IrDA address - * - * It basically look into the discovery log until there is a match. - */ -static inline int -irnet_dname_to_daddr(irnet_socket * self) -{ - struct irda_device_info *discoveries; /* Copy of the discovery log */ - int number; /* Number of nodes in the log */ - int i; - - DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); - - /* Ask lmp for the current discovery log */ - discoveries = irlmp_get_discoveries(&number, 0xffff, - DISCOVERY_DEFAULT_SLOTS); - /* Check if the we got some results */ - if(discoveries == NULL) - DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n"); - - /* - * Now, check all discovered devices (if any), and connect - * client only about the services that the client is - * interested in... - */ - for(i = 0; i < number; i++) - { - /* Does the name match ? */ - if(!strncmp(discoveries[i].info, self->rname, NICKNAME_MAX_LEN)) - { - /* Yes !!! Get it.. */ - self->daddr = discoveries[i].daddr; - DEBUG(IRDA_SR_INFO, "discovered device ``%s'' at address 0x%08x.\n", - self->rname, self->daddr); - kfree(discoveries); - DEXIT(IRDA_SR_TRACE, "\n"); - return 0; - } - } - /* No luck ! */ - DEBUG(IRDA_SR_INFO, "cannot discover device ``%s'' !!!\n", self->rname); - kfree(discoveries); - return -EADDRNOTAVAIL; -} - - -/************************* SOCKET ROUTINES *************************/ -/* - * This are the main operations on IrNET sockets, basically to create - * and destroy IrNET sockets. These are called from the PPP part... - */ - -/*------------------------------------------------------------------*/ -/* - * Create a IrNET instance : just initialise some parameters... - */ -int -irda_irnet_create(irnet_socket * self) -{ - DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self); - - self->magic = IRNET_MAGIC; /* Paranoia */ - - self->ttp_open = 0; /* Prevent higher layer from accessing IrTTP */ - self->ttp_connect = 0; /* Not connecting yet */ - self->rname[0] = '\0'; /* May be set via control channel */ - self->rdaddr = DEV_ADDR_ANY; /* May be set via control channel */ - self->rsaddr = DEV_ADDR_ANY; /* May be set via control channel */ - self->daddr = DEV_ADDR_ANY; /* Until we get connected */ - self->saddr = DEV_ADDR_ANY; /* Until we get connected */ - self->max_sdu_size_rx = TTP_SAR_UNBOUND; - - /* Register as a client with IrLMP */ - self->ckey = irlmp_register_client(0, NULL, NULL, NULL); -#ifdef DISCOVERY_NOMASK - self->mask = 0xffff; /* For W2k compatibility */ -#else /* DISCOVERY_NOMASK */ - self->mask = irlmp_service_to_hint(S_LAN); -#endif /* DISCOVERY_NOMASK */ - self->tx_flow = FLOW_START; /* Flow control from IrTTP */ - - INIT_WORK(&self->disconnect_work, irnet_ppp_disconnect); - - DEXIT(IRDA_SOCK_TRACE, "\n"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Connect to the other side : - * o convert device name to an address - * o find the socket number (dlsap) - * o Establish the connection - * - * Note : We no longer mimic af_irda. The IAS query for finding the TSAP - * is done asynchronously, like the TTP connection. This allow us to - * call this function from any context (not only process). - * The downside is that following what's happening in there is tricky - * because it involve various functions all over the place... - */ -int -irda_irnet_connect(irnet_socket * self) -{ - int err; - - DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self); - - /* Check if we are already trying to connect. - * Because irda_irnet_connect() can be called directly by pppd plus - * packet retries in ppp_generic and connect may take time, plus we may - * race with irnet_connect_indication(), we need to be careful there... */ - if(test_and_set_bit(0, &self->ttp_connect)) - DRETURN(-EBUSY, IRDA_SOCK_INFO, "Already connecting...\n"); - if((self->iriap != NULL) || (self->tsap != NULL)) - DERROR(IRDA_SOCK_ERROR, "Socket not cleaned up...\n"); - - /* Insert ourselves in the hashbin so that the IrNET server can find us. - * Notes : 4th arg is string of 32 char max and must be null terminated - * When 4th arg is used (string), 3rd arg isn't (int) - * Can't re-insert (MUST remove first) so check for that... */ - if((irnet_server.running) && (self->q.q_next == NULL)) - { - spin_lock_bh(&irnet_server.spinlock); - hashbin_insert(irnet_server.list, (irda_queue_t *) self, 0, self->rname); - spin_unlock_bh(&irnet_server.spinlock); - DEBUG(IRDA_SOCK_INFO, "Inserted ``%s'' in hashbin...\n", self->rname); - } - - /* If we don't have anything (no address, no name) */ - if((self->rdaddr == DEV_ADDR_ANY) && (self->rname[0] == '\0')) - { - /* Try to find a suitable address */ - if((err = irnet_discover_daddr_and_lsap_sel(self)) != 0) - DRETURN(err, IRDA_SOCK_INFO, "auto-connect failed!\n"); - /* In most cases, the call above is non-blocking */ - } - else - { - /* If we have only the name (no address), try to get an address */ - if(self->rdaddr == DEV_ADDR_ANY) - { - if((err = irnet_dname_to_daddr(self)) != 0) - DRETURN(err, IRDA_SOCK_INFO, "name connect failed!\n"); - } - else - /* Use the requested destination address */ - self->daddr = self->rdaddr; - - /* Query remote LM-IAS to find LSAP selector */ - irnet_find_lsap_sel(self); - /* The above call is non blocking */ - } - - /* At this point, we are waiting for the IrDA stack to call us back, - * or we have already failed. - * We will finish the connection procedure in irnet_connect_tsap(). - */ - DEXIT(IRDA_SOCK_TRACE, "\n"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Function irda_irnet_destroy(self) - * - * Destroy irnet instance - * - * Note : this need to be called from a process context. - */ -void -irda_irnet_destroy(irnet_socket * self) -{ - DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self); - if(self == NULL) - return; - - /* Remove ourselves from hashbin (if we are queued in hashbin) - * Note : `irnet_server.running' protect us from calls in hashbin_delete() */ - if((irnet_server.running) && (self->q.q_next != NULL)) - { - struct irnet_socket * entry; - DEBUG(IRDA_SOCK_INFO, "Removing from hash..\n"); - spin_lock_bh(&irnet_server.spinlock); - entry = hashbin_remove_this(irnet_server.list, (irda_queue_t *) self); - self->q.q_next = NULL; - spin_unlock_bh(&irnet_server.spinlock); - DASSERT(entry == self, , IRDA_SOCK_ERROR, "Can't remove from hash.\n"); - } - - /* If we were connected, post a message */ - if(test_bit(0, &self->ttp_open)) - { - /* Note : as the disconnect comes from ppp_generic, the unit number - * doesn't exist anymore when we post the event, so we need to pass - * NULL as the first arg... */ - irnet_post_event(NULL, IRNET_DISCONNECT_TO, - self->saddr, self->daddr, self->rname, 0); - } - - /* Prevent various IrDA callbacks from messing up things - * Need to be first */ - clear_bit(0, &self->ttp_connect); - - /* Prevent higher layer from accessing IrTTP */ - clear_bit(0, &self->ttp_open); - - /* Unregister with IrLMP */ - irlmp_unregister_client(self->ckey); - - /* Unregister with LM-IAS */ - if(self->iriap) - { - iriap_close(self->iriap); - self->iriap = NULL; - } - - /* Cleanup eventual discoveries from connection attempt or control channel */ - if(self->discoveries != NULL) - { - /* Cleanup our copy of the discovery log */ - kfree(self->discoveries); - self->discoveries = NULL; - } - - /* Close our IrTTP connection */ - if(self->tsap) - { - DEBUG(IRDA_SOCK_INFO, "Closing our TTP connection.\n"); - irttp_disconnect_request(self->tsap, NULL, P_NORMAL); - irttp_close_tsap(self->tsap); - self->tsap = NULL; - } - self->stsap_sel = 0; - - DEXIT(IRDA_SOCK_TRACE, "\n"); -} - - -/************************** SERVER SOCKET **************************/ -/* - * The IrNET service is composed of one server socket and a variable - * number of regular IrNET sockets. The server socket is supposed to - * handle incoming connections and redirect them to one IrNET sockets. - * It's a superset of the regular IrNET socket, but has a very distinct - * behaviour... - */ - -/*------------------------------------------------------------------*/ -/* - * Function irnet_daddr_to_dname (self) - * - * Convert an IrDA address to a IrDA nickname - * - * It basically look into the discovery log until there is a match. - */ -static inline int -irnet_daddr_to_dname(irnet_socket * self) -{ - struct irda_device_info *discoveries; /* Copy of the discovery log */ - int number; /* Number of nodes in the log */ - int i; - - DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self); - - /* Ask lmp for the current discovery log */ - discoveries = irlmp_get_discoveries(&number, 0xffff, - DISCOVERY_DEFAULT_SLOTS); - /* Check if the we got some results */ - if (discoveries == NULL) - DRETURN(-ENETUNREACH, IRDA_SERV_INFO, "Cachelog empty...\n"); - - /* Now, check all discovered devices (if any) */ - for(i = 0; i < number; i++) - { - /* Does the name match ? */ - if(discoveries[i].daddr == self->daddr) - { - /* Yes !!! Get it.. */ - strlcpy(self->rname, discoveries[i].info, sizeof(self->rname)); - self->rname[sizeof(self->rname) - 1] = '\0'; - DEBUG(IRDA_SERV_INFO, "Device 0x%08x is in fact ``%s''.\n", - self->daddr, self->rname); - kfree(discoveries); - DEXIT(IRDA_SERV_TRACE, "\n"); - return 0; - } - } - /* No luck ! */ - DEXIT(IRDA_SERV_INFO, ": cannot discover device 0x%08x !!!\n", self->daddr); - kfree(discoveries); - return -EADDRNOTAVAIL; -} - -/*------------------------------------------------------------------*/ -/* - * Function irda_find_socket (self) - * - * Find the correct IrNET socket - * - * Look into the list of IrNET sockets and finds one with the right - * properties... - */ -static inline irnet_socket * -irnet_find_socket(irnet_socket * self) -{ - irnet_socket * new = (irnet_socket *) NULL; - int err; - - DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self); - - /* Get the addresses of the requester */ - self->daddr = irttp_get_daddr(self->tsap); - self->saddr = irttp_get_saddr(self->tsap); - - /* Try to get the IrDA nickname of the requester */ - err = irnet_daddr_to_dname(self); - - /* Protect access to the instance list */ - spin_lock_bh(&irnet_server.spinlock); - - /* So now, try to get an socket having specifically - * requested that nickname */ - if(err == 0) - { - new = (irnet_socket *) hashbin_find(irnet_server.list, - 0, self->rname); - if(new) - DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches rname ``%s''.\n", - new, new->rname); - } - - /* If no name matches, try to find an socket by the destination address */ - /* It can be either the requested destination address (set via the - * control channel), or the current destination address if the - * socket is in the middle of a connection request */ - if(new == (irnet_socket *) NULL) - { - new = (irnet_socket *) hashbin_get_first(irnet_server.list); - while(new !=(irnet_socket *) NULL) - { - /* Does it have the same address ? */ - if((new->rdaddr == self->daddr) || (new->daddr == self->daddr)) - { - /* Yes !!! Get it.. */ - DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches daddr %#08x.\n", - new, self->daddr); - break; - } - new = (irnet_socket *) hashbin_get_next(irnet_server.list); - } - } - - /* If we don't have any socket, get the first unconnected socket */ - if(new == (irnet_socket *) NULL) - { - new = (irnet_socket *) hashbin_get_first(irnet_server.list); - while(new !=(irnet_socket *) NULL) - { - /* Is it available ? */ - if(!(test_bit(0, &new->ttp_open)) && (new->rdaddr == DEV_ADDR_ANY) && - (new->rname[0] == '\0') && (new->ppp_open)) - { - /* Yes !!! Get it.. */ - DEBUG(IRDA_SERV_INFO, "Socket 0x%p is free.\n", - new); - break; - } - new = (irnet_socket *) hashbin_get_next(irnet_server.list); - } - } - - /* Spin lock end */ - spin_unlock_bh(&irnet_server.spinlock); - - DEXIT(IRDA_SERV_TRACE, " - new = 0x%p\n", new); - return new; -} - -/*------------------------------------------------------------------*/ -/* - * Function irda_connect_socket (self) - * - * Connect an incoming connection to the socket - * - */ -static inline int -irnet_connect_socket(irnet_socket * server, - irnet_socket * new, - struct qos_info * qos, - __u32 max_sdu_size, - __u8 max_header_size) -{ - DENTER(IRDA_SERV_TRACE, "(server=0x%p, new=0x%p)\n", - server, new); - - /* Now attach up the new socket */ - new->tsap = irttp_dup(server->tsap, new); - DABORT(new->tsap == NULL, -1, IRDA_SERV_ERROR, "dup failed!\n"); - - /* Set up all the relevant parameters on the new socket */ - new->stsap_sel = new->tsap->stsap_sel; - new->dtsap_sel = new->tsap->dtsap_sel; - new->saddr = irttp_get_saddr(new->tsap); - new->daddr = irttp_get_daddr(new->tsap); - - new->max_header_size = max_header_size; - new->max_sdu_size_tx = max_sdu_size; - new->max_data_size = max_sdu_size; -#ifdef STREAM_COMPAT - /* If we want to receive "stream sockets" */ - if(max_sdu_size == 0) - new->max_data_size = irttp_get_max_seg_size(new->tsap); -#endif /* STREAM_COMPAT */ - - /* Clean up the original one to keep it in listen state */ - irttp_listen(server->tsap); - - /* Send a connection response on the new socket */ - irttp_connect_response(new->tsap, new->max_sdu_size_rx, NULL); - - /* Allow PPP to send its junk over the new socket... */ - set_bit(0, &new->ttp_open); - - /* Not connecting anymore, and clean up last possible remains - * of connection attempts on the socket */ - clear_bit(0, &new->ttp_connect); - if(new->iriap) - { - iriap_close(new->iriap); - new->iriap = NULL; - } - if(new->discoveries != NULL) - { - kfree(new->discoveries); - new->discoveries = NULL; - } - -#ifdef CONNECT_INDIC_KICK - /* As currently we don't block packets in ppp_irnet_send() while passive, - * this is not really needed... - * Also, not doing it give IrDA a chance to finish the setup properly - * before being swamped with packets... */ - ppp_output_wakeup(&new->chan); -#endif /* CONNECT_INDIC_KICK */ - - /* Notify the control channel */ - irnet_post_event(new, IRNET_CONNECT_FROM, - new->saddr, new->daddr, server->rname, 0); - - DEXIT(IRDA_SERV_TRACE, "\n"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Function irda_disconnect_server (self) - * - * Cleanup the server socket when the incoming connection abort - * - */ -static inline void -irnet_disconnect_server(irnet_socket * self, - struct sk_buff *skb) -{ - DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self); - - /* Put the received packet in the black hole */ - kfree_skb(skb); - -#ifdef FAIL_SEND_DISCONNECT - /* Tell the other party we don't want to be connected */ - /* Hum... Is it the right thing to do ? And do we need to send - * a connect response before ? It looks ok without this... */ - irttp_disconnect_request(self->tsap, NULL, P_NORMAL); -#endif /* FAIL_SEND_DISCONNECT */ - - /* Notify the control channel (see irnet_find_socket()) */ - irnet_post_event(NULL, IRNET_REQUEST_FROM, - self->saddr, self->daddr, self->rname, 0); - - /* Clean up the server to keep it in listen state */ - irttp_listen(self->tsap); - - DEXIT(IRDA_SERV_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irda_setup_server (self) - * - * Create a IrTTP server and set it up... - * - * Register the IrLAN hint bit, create a IrTTP instance for us, - * set all the IrTTP callbacks and create an IrIAS entry... - */ -static inline int -irnet_setup_server(void) -{ - __u16 hints; - - DENTER(IRDA_SERV_TRACE, "()\n"); - - /* Initialise the regular socket part of the server */ - irda_irnet_create(&irnet_server.s); - - /* Open a local TSAP (an IrTTP instance) for the server */ - irnet_open_tsap(&irnet_server.s); - - /* PPP part setup */ - irnet_server.s.ppp_open = 0; - irnet_server.s.chan.private = NULL; - irnet_server.s.file = NULL; - - /* Get the hint bit corresponding to IrLAN */ - /* Note : we overload the IrLAN hint bit. As it is only a "hint", and as - * we provide roughly the same functionality as IrLAN, this is ok. - * In fact, the situation is similar as JetSend overloading the Obex hint - */ - hints = irlmp_service_to_hint(S_LAN); - -#ifdef ADVERTISE_HINT - /* Register with IrLMP as a service (advertise our hint bit) */ - irnet_server.skey = irlmp_register_service(hints); -#endif /* ADVERTISE_HINT */ - - /* Register with LM-IAS (so that people can connect to us) */ - irnet_server.ias_obj = irias_new_object(IRNET_SERVICE_NAME, jiffies); - irias_add_integer_attrib(irnet_server.ias_obj, IRNET_IAS_VALUE, - irnet_server.s.stsap_sel, IAS_KERNEL_ATTR); - irias_insert_object(irnet_server.ias_obj); - -#ifdef DISCOVERY_EVENTS - /* Tell IrLMP we want to be notified of newly discovered nodes */ - irlmp_update_client(irnet_server.s.ckey, hints, - irnet_discovery_indication, irnet_expiry_indication, - (void *) &irnet_server.s); -#endif - - DEXIT(IRDA_SERV_TRACE, " - self=0x%p\n", &irnet_server.s); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Function irda_destroy_server (self) - * - * Destroy the IrTTP server... - * - * Reverse of the previous function... - */ -static inline void -irnet_destroy_server(void) -{ - DENTER(IRDA_SERV_TRACE, "()\n"); - -#ifdef ADVERTISE_HINT - /* Unregister with IrLMP */ - irlmp_unregister_service(irnet_server.skey); -#endif /* ADVERTISE_HINT */ - - /* Unregister with LM-IAS */ - if(irnet_server.ias_obj) - irias_delete_object(irnet_server.ias_obj); - - /* Cleanup the socket part */ - irda_irnet_destroy(&irnet_server.s); - - DEXIT(IRDA_SERV_TRACE, "\n"); -} - - -/************************ IRDA-TTP CALLBACKS ************************/ -/* - * When we create a IrTTP instance, we pass to it a set of callbacks - * that IrTTP will call in case of various events. - * We take care of those events here. - */ - -/*------------------------------------------------------------------*/ -/* - * Function irnet_data_indication (instance, sap, skb) - * - * Received some data from TinyTP. Just queue it on the receive queue - * - */ -static int -irnet_data_indication(void * instance, - void * sap, - struct sk_buff *skb) -{ - irnet_socket * ap = (irnet_socket *) instance; - unsigned char * p; - int code = 0; - - DENTER(IRDA_TCB_TRACE, "(self/ap=0x%p, skb=0x%p)\n", - ap, skb); - DASSERT(skb != NULL, 0, IRDA_CB_ERROR, "skb is NULL !!!\n"); - - /* Check is ppp is ready to receive our packet */ - if(!ap->ppp_open) - { - DERROR(IRDA_CB_ERROR, "PPP not ready, dropping packet...\n"); - /* When we return error, TTP will need to requeue the skb and - * will stop the sender. IrTTP will stall until we send it a - * flow control request... */ - return -ENOMEM; - } - - /* strip address/control field if present */ - p = skb->data; - if((p[0] == PPP_ALLSTATIONS) && (p[1] == PPP_UI)) - { - /* chop off address/control */ - if(skb->len < 3) - goto err_exit; - p = skb_pull(skb, 2); - } - - /* decompress protocol field if compressed */ - if(p[0] & 1) - { - /* protocol is compressed */ - *(u8 *)skb_push(skb, 1) = 0; - } - else - if(skb->len < 2) - goto err_exit; - - /* pass to generic ppp layer */ - /* Note : how do I know if ppp can accept or not the packet ? This is - * essential if I want to manage flow control smoothly... */ - ppp_input(&ap->chan, skb); - - DEXIT(IRDA_TCB_TRACE, "\n"); - return 0; - - err_exit: - DERROR(IRDA_CB_ERROR, "Packet too small, dropping...\n"); - kfree_skb(skb); - ppp_input_error(&ap->chan, code); - return 0; /* Don't return an error code, only for flow control... */ -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_disconnect_indication (instance, sap, reason, skb) - * - * Connection has been closed. Chech reason to find out why - * - * Note : there are many cases where we come here : - * o attempted to connect, timeout - * o connected, link is broken, LAP has timeout - * o connected, other side close the link - * o connection request on the server not handled - */ -static void -irnet_disconnect_indication(void * instance, - void * sap, - LM_REASON reason, - struct sk_buff *skb) -{ - irnet_socket * self = (irnet_socket *) instance; - int test_open; - int test_connect; - - DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self); - DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n"); - - /* Don't care about it, but let's not leak it */ - if(skb) - dev_kfree_skb(skb); - - /* Prevent higher layer from accessing IrTTP */ - test_open = test_and_clear_bit(0, &self->ttp_open); - /* Not connecting anymore... - * (note : TSAP is open, so IAP callbacks are no longer pending...) */ - test_connect = test_and_clear_bit(0, &self->ttp_connect); - - /* If both self->ttp_open and self->ttp_connect are NULL, it mean that we - * have a race condition with irda_irnet_destroy() or - * irnet_connect_indication(), so don't mess up tsap... - */ - if(!(test_open || test_connect)) - { - DERROR(IRDA_CB_ERROR, "Race condition detected...\n"); - return; - } - - /* If we were active, notify the control channel */ - if(test_open) - irnet_post_event(self, IRNET_DISCONNECT_FROM, - self->saddr, self->daddr, self->rname, 0); - else - /* If we were trying to connect, notify the control channel */ - if((self->tsap) && (self != &irnet_server.s)) - irnet_post_event(self, IRNET_NOANSWER_FROM, - self->saddr, self->daddr, self->rname, 0); - - /* Close our IrTTP connection, cleanup tsap */ - if((self->tsap) && (self != &irnet_server.s)) - { - DEBUG(IRDA_CB_INFO, "Closing our TTP connection.\n"); - irttp_close_tsap(self->tsap); - self->tsap = NULL; - } - /* Cleanup the socket in case we want to reconnect in ppp_output_wakeup() */ - self->stsap_sel = 0; - self->daddr = DEV_ADDR_ANY; - self->tx_flow = FLOW_START; - - /* Deal with the ppp instance if it's still alive */ - if(self->ppp_open) - { - if(test_open) - { - /* ppp_unregister_channel() wants a user context. */ - schedule_work(&self->disconnect_work); - } - else - { - /* If we were trying to connect, flush (drain) ppp_generic - * Tx queue (most often we have blocked it), which will - * trigger an other attempt to connect. If we are passive, - * this will empty the Tx queue after last try. */ - ppp_output_wakeup(&self->chan); - } - } - - DEXIT(IRDA_TCB_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_connect_confirm (instance, sap, qos, max_sdu_size, skb) - * - * Connections has been confirmed by the remote device - * - */ -static void -irnet_connect_confirm(void * instance, - void * sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - irnet_socket * self = (irnet_socket *) instance; - - DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self); - - /* Check if socket is closing down (via irda_irnet_destroy()) */ - if(! test_bit(0, &self->ttp_connect)) - { - DERROR(IRDA_CB_ERROR, "Socket no longer connecting. Ouch !\n"); - return; - } - - /* How much header space do we need to reserve */ - self->max_header_size = max_header_size; - - /* IrTTP max SDU size in transmit direction */ - self->max_sdu_size_tx = max_sdu_size; - self->max_data_size = max_sdu_size; -#ifdef STREAM_COMPAT - if(max_sdu_size == 0) - self->max_data_size = irttp_get_max_seg_size(self->tsap); -#endif /* STREAM_COMPAT */ - - /* At this point, IrLMP has assigned our source address */ - self->saddr = irttp_get_saddr(self->tsap); - - /* Allow higher layer to access IrTTP */ - set_bit(0, &self->ttp_open); - clear_bit(0, &self->ttp_connect); /* Not racy, IrDA traffic is serial */ - /* Give a kick in the ass of ppp_generic so that he sends us some data */ - ppp_output_wakeup(&self->chan); - - /* Check size of received packet */ - if(skb->len > 0) - { -#ifdef PASS_CONNECT_PACKETS - DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n"); - /* Try to pass it to PPP */ - irnet_data_indication(instance, sap, skb); -#else /* PASS_CONNECT_PACKETS */ - DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n"); - kfree_skb(skb); /* Note : will be optimised with other kfree... */ -#endif /* PASS_CONNECT_PACKETS */ - } - else - kfree_skb(skb); - - /* Notify the control channel */ - irnet_post_event(self, IRNET_CONNECT_TO, - self->saddr, self->daddr, self->rname, 0); - - DEXIT(IRDA_TCB_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_flow_indication (instance, sap, flow) - * - * Used by TinyTP to tell us if it can accept more data or not - * - */ -static void -irnet_flow_indication(void * instance, - void * sap, - LOCAL_FLOW flow) -{ - irnet_socket * self = (irnet_socket *) instance; - LOCAL_FLOW oldflow = self->tx_flow; - - DENTER(IRDA_TCB_TRACE, "(self=0x%p, flow=%d)\n", self, flow); - - /* Update our state */ - self->tx_flow = flow; - - /* Check what IrTTP want us to do... */ - switch(flow) - { - case FLOW_START: - DEBUG(IRDA_CB_INFO, "IrTTP wants us to start again\n"); - /* Check if we really need to wake up PPP */ - if(oldflow == FLOW_STOP) - ppp_output_wakeup(&self->chan); - else - DEBUG(IRDA_CB_INFO, "But we were already transmitting !!!\n"); - break; - case FLOW_STOP: - DEBUG(IRDA_CB_INFO, "IrTTP wants us to slow down\n"); - break; - default: - DEBUG(IRDA_CB_INFO, "Unknown flow command!\n"); - break; - } - - DEXIT(IRDA_TCB_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_status_indication (instance, sap, reason, skb) - * - * Link (IrLAP) status report. - * - */ -static void -irnet_status_indication(void * instance, - LINK_STATUS link, - LOCK_STATUS lock) -{ - irnet_socket * self = (irnet_socket *) instance; - - DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self); - DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n"); - - /* We can only get this event if we are connected */ - switch(link) - { - case STATUS_NO_ACTIVITY: - irnet_post_event(self, IRNET_BLOCKED_LINK, - self->saddr, self->daddr, self->rname, 0); - break; - default: - DEBUG(IRDA_CB_INFO, "Unknown status...\n"); - } - - DEXIT(IRDA_TCB_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_connect_indication(instance, sap, qos, max_sdu_size, userdata) - * - * Incoming connection - * - * In theory, this function is called only on the server socket. - * Some other node is attempting to connect to the IrNET service, and has - * sent a connection request on our server socket. - * We just redirect the connection to the relevant IrNET socket. - * - * Note : we also make sure that between 2 irnet nodes, there can - * exist only one irnet connection. - */ -static void -irnet_connect_indication(void * instance, - void * sap, - struct qos_info *qos, - __u32 max_sdu_size, - __u8 max_header_size, - struct sk_buff *skb) -{ - irnet_socket * server = &irnet_server.s; - irnet_socket * new = (irnet_socket *) NULL; - - DENTER(IRDA_TCB_TRACE, "(server=0x%p)\n", server); - DASSERT(instance == &irnet_server, , IRDA_CB_ERROR, - "Invalid instance (0x%p) !!!\n", instance); - DASSERT(sap == irnet_server.s.tsap, , IRDA_CB_ERROR, "Invalid sap !!!\n"); - - /* Try to find the most appropriate IrNET socket */ - new = irnet_find_socket(server); - - /* After all this hard work, do we have an socket ? */ - if(new == (irnet_socket *) NULL) - { - DEXIT(IRDA_CB_INFO, ": No socket waiting for this connection.\n"); - irnet_disconnect_server(server, skb); - return; - } - - /* Is the socket already busy ? */ - if(test_bit(0, &new->ttp_open)) - { - DEXIT(IRDA_CB_INFO, ": Socket already connected.\n"); - irnet_disconnect_server(server, skb); - return; - } - - /* The following code is a bit tricky, so need comments ;-) - */ - /* If ttp_connect is set, the socket is trying to connect to the other - * end and may have sent a IrTTP connection request and is waiting for - * a connection response (that may never come). - * Now, the pain is that the socket may have opened a tsap and is - * waiting on it, while the other end is trying to connect to it on - * another tsap. - * Because IrNET can be peer to peer, we need to workaround this. - * Furthermore, the way the irnetd script is implemented, the - * target will create a second IrNET connection back to the - * originator and expect the originator to bind this new connection - * to the original PPPD instance. - * And of course, if we don't use irnetd, we can have a race when - * both side try to connect simultaneously, which could leave both - * connections half closed (yuck). - * Conclusions : - * 1) The "originator" must accept the new connection and get rid - * of the old one so that irnetd works - * 2) One side must deny the new connection to avoid races, - * but both side must agree on which side it is... - * Most often, the originator is primary at the LAP layer. - * Jean II - */ - /* Now, let's look at the way I wrote the test... - * We need to clear up the ttp_connect flag atomically to prevent - * irnet_disconnect_indication() to mess up the tsap we are going to close. - * We want to clear the ttp_connect flag only if we close the tsap, - * otherwise we will never close it, so we need to check for primary - * *before* doing the test on the flag. - * And of course, ALLOW_SIMULT_CONNECT can disable this entirely... - * Jean II - */ - - /* Socket already connecting ? On primary ? */ - if(0 -#ifdef ALLOW_SIMULT_CONNECT - || ((irttp_is_primary(server->tsap) == 1) && /* primary */ - (test_and_clear_bit(0, &new->ttp_connect))) -#endif /* ALLOW_SIMULT_CONNECT */ - ) - { - DERROR(IRDA_CB_ERROR, "Socket already connecting, but going to reuse it !\n"); - - /* Cleanup the old TSAP if necessary - IrIAP will be cleaned up later */ - if(new->tsap != NULL) - { - /* Close the old connection the new socket was attempting, - * so that we can hook it up to the new connection. - * It's now safe to do it... */ - irttp_close_tsap(new->tsap); - new->tsap = NULL; - } - } - else - { - /* Three options : - * 1) socket was not connecting or connected : ttp_connect should be 0. - * 2) we don't want to connect the socket because we are secondary or - * ALLOW_SIMULT_CONNECT is undefined. ttp_connect should be 1. - * 3) we are half way in irnet_disconnect_indication(), and it's a - * nice race condition... Fortunately, we can detect that by checking - * if tsap is still alive. On the other hand, we can't be in - * irda_irnet_destroy() otherwise we would not have found this - * socket in the hashbin. - * Jean II */ - if((test_bit(0, &new->ttp_connect)) || (new->tsap != NULL)) - { - /* Don't mess this socket, somebody else in in charge... */ - DERROR(IRDA_CB_ERROR, "Race condition detected, socket in use, abort connect...\n"); - irnet_disconnect_server(server, skb); - return; - } - } - - /* So : at this point, we have a socket, and it is idle. Good ! */ - irnet_connect_socket(server, new, qos, max_sdu_size, max_header_size); - - /* Check size of received packet */ - if(skb->len > 0) - { -#ifdef PASS_CONNECT_PACKETS - DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n"); - /* Try to pass it to PPP */ - irnet_data_indication(new, new->tsap, skb); -#else /* PASS_CONNECT_PACKETS */ - DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n"); - kfree_skb(skb); /* Note : will be optimised with other kfree... */ -#endif /* PASS_CONNECT_PACKETS */ - } - else - kfree_skb(skb); - - DEXIT(IRDA_TCB_TRACE, "\n"); -} - - -/********************** IRDA-IAS/LMP CALLBACKS **********************/ -/* - * These are the callbacks called by other layers of the IrDA stack, - * mainly LMP for discovery and IAS for name queries. - */ - -/*------------------------------------------------------------------*/ -/* - * Function irnet_getvalue_confirm (result, obj_id, value, priv) - * - * Got answer from remote LM-IAS, just connect - * - * This is the reply to a IAS query we were doing to find the TSAP of - * the device we want to connect to. - * If we have found a valid TSAP, just initiate the TTP connection - * on this TSAP. - */ -static void -irnet_getvalue_confirm(int result, - __u16 obj_id, - struct ias_value *value, - void * priv) -{ - irnet_socket * self = (irnet_socket *) priv; - - DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); - DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n"); - - /* Check if already connected (via irnet_connect_socket()) - * or socket is closing down (via irda_irnet_destroy()) */ - if(! test_bit(0, &self->ttp_connect)) - { - DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n"); - return; - } - - /* We probably don't need to make any more queries */ - iriap_close(self->iriap); - self->iriap = NULL; - - /* Post process the IAS reply */ - self->dtsap_sel = irnet_ias_to_tsap(self, result, value); - - /* If error, just go out */ - if(self->errno) - { - clear_bit(0, &self->ttp_connect); - DERROR(IRDA_OCB_ERROR, "IAS connect failed ! (0x%X)\n", self->errno); - return; - } - - DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n", - self->daddr, self->dtsap_sel); - - /* Start up TTP - non blocking */ - irnet_connect_tsap(self); - - DEXIT(IRDA_OCB_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_discovervalue_confirm (result, obj_id, value, priv) - * - * Handle the TSAP discovery procedure state machine. - * Got answer from remote LM-IAS, try next device - * - * We are doing a TSAP discovery procedure, and we got an answer to - * a IAS query we were doing to find the TSAP on one of the address - * in the discovery log. - * - * If we have found a valid TSAP for the first time, save it. If it's - * not the first time we found one, complain. - * - * If we have more addresses in the log, just initiate a new query. - * Note that those query may fail (see irnet_discover_daddr_and_lsap_sel()) - * - * Otherwise, wrap up the procedure (cleanup), check if we have found - * any device and connect to it. - */ -static void -irnet_discovervalue_confirm(int result, - __u16 obj_id, - struct ias_value *value, - void * priv) -{ - irnet_socket * self = (irnet_socket *) priv; - __u8 dtsap_sel; /* TSAP we are looking for */ - - DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); - DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n"); - - /* Check if already connected (via irnet_connect_socket()) - * or socket is closing down (via irda_irnet_destroy()) */ - if(! test_bit(0, &self->ttp_connect)) - { - DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n"); - return; - } - - /* Post process the IAS reply */ - dtsap_sel = irnet_ias_to_tsap(self, result, value); - - /* Have we got something ? */ - if(self->errno == 0) - { - /* We found the requested service */ - if(self->daddr != DEV_ADDR_ANY) - { - DERROR(IRDA_OCB_ERROR, "More than one device in range supports IrNET...\n"); - } - else - { - /* First time we found that one, save it ! */ - self->daddr = self->discoveries[self->disco_index].daddr; - self->dtsap_sel = dtsap_sel; - } - } - - /* If no failure */ - if((self->errno == -EADDRNOTAVAIL) || (self->errno == 0)) - { - int ret; - - /* Search the next node */ - ret = irnet_discover_next_daddr(self); - if(!ret) - { - /* In this case, the above request was non-blocking. - * We will return here after a while... */ - return; - } - /* In this case, we have processed the last discovery item */ - } - - /* No more queries to be done (failure or last one) */ - - /* We probably don't need to make any more queries */ - iriap_close(self->iriap); - self->iriap = NULL; - - /* No more items : remove the log and signal termination */ - DEBUG(IRDA_OCB_INFO, "Cleaning up log (0x%p)\n", - self->discoveries); - if(self->discoveries != NULL) - { - /* Cleanup our copy of the discovery log */ - kfree(self->discoveries); - self->discoveries = NULL; - } - self->disco_number = -1; - - /* Check out what we found */ - if(self->daddr == DEV_ADDR_ANY) - { - self->daddr = DEV_ADDR_ANY; - clear_bit(0, &self->ttp_connect); - DEXIT(IRDA_OCB_TRACE, ": cannot discover IrNET in any device !!!\n"); - return; - } - - /* We have a valid address - just connect */ - - DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n", - self->daddr, self->dtsap_sel); - - /* Start up TTP - non blocking */ - irnet_connect_tsap(self); - - DEXIT(IRDA_OCB_TRACE, "\n"); -} - -#ifdef DISCOVERY_EVENTS -/*------------------------------------------------------------------*/ -/* - * Function irnet_discovery_indication (discovery) - * - * Got a discovery indication from IrLMP, post an event - * - * Note : IrLMP take care of matching the hint mask for us, and also - * check if it is a "new" node for us... - * - * As IrLMP filter on the IrLAN hint bit, we get both IrLAN and IrNET - * nodes, so it's only at connection time that we will know if the - * node support IrNET, IrLAN or both. The other solution is to check - * in IAS the PNP ids and service name. - * Note : even if a node support IrNET (or IrLAN), it's no guarantee - * that we will be able to connect to it, the node might already be - * busy... - * - * One last thing : in some case, this function will trigger duplicate - * discovery events. On the other hand, we should catch all - * discoveries properly (i.e. not miss one). Filtering duplicate here - * is to messy, so we leave that to user space... - */ -static void -irnet_discovery_indication(discinfo_t * discovery, - DISCOVERY_MODE mode, - void * priv) -{ - irnet_socket * self = &irnet_server.s; - - DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); - DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR, - "Invalid instance (0x%p) !!!\n", priv); - - DEBUG(IRDA_OCB_INFO, "Discovered new IrNET/IrLAN node %s...\n", - discovery->info); - - /* Notify the control channel */ - irnet_post_event(NULL, IRNET_DISCOVER, - discovery->saddr, discovery->daddr, discovery->info, - get_unaligned((__u16 *)discovery->hints)); - - DEXIT(IRDA_OCB_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_expiry_indication (expiry) - * - * Got a expiry indication from IrLMP, post an event - * - * Note : IrLMP take care of matching the hint mask for us, we only - * check if it is a "new" node... - */ -static void -irnet_expiry_indication(discinfo_t * expiry, - DISCOVERY_MODE mode, - void * priv) -{ - irnet_socket * self = &irnet_server.s; - - DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); - DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR, - "Invalid instance (0x%p) !!!\n", priv); - - DEBUG(IRDA_OCB_INFO, "IrNET/IrLAN node %s expired...\n", - expiry->info); - - /* Notify the control channel */ - irnet_post_event(NULL, IRNET_EXPIRE, - expiry->saddr, expiry->daddr, expiry->info, - get_unaligned((__u16 *)expiry->hints)); - - DEXIT(IRDA_OCB_TRACE, "\n"); -} -#endif /* DISCOVERY_EVENTS */ - - -/*********************** PROC ENTRY CALLBACKS ***********************/ -/* - * We create a instance in the /proc filesystem, and here we take care - * of that... - */ - -#ifdef CONFIG_PROC_FS -static int -irnet_proc_show(struct seq_file *m, void *v) -{ - irnet_socket * self; - char * state; - int i = 0; - - /* Get the IrNET server information... */ - seq_printf(m, "IrNET server - "); - seq_printf(m, "IrDA state: %s, ", - (irnet_server.running ? "running" : "dead")); - seq_printf(m, "stsap_sel: %02x, ", irnet_server.s.stsap_sel); - seq_printf(m, "dtsap_sel: %02x\n", irnet_server.s.dtsap_sel); - - /* Do we need to continue ? */ - if(!irnet_server.running) - return 0; - - /* Protect access to the instance list */ - spin_lock_bh(&irnet_server.spinlock); - - /* Get the sockets one by one... */ - self = (irnet_socket *) hashbin_get_first(irnet_server.list); - while(self != NULL) - { - /* Start printing info about the socket. */ - seq_printf(m, "\nIrNET socket %d - ", i++); - - /* First, get the requested configuration */ - seq_printf(m, "Requested IrDA name: \"%s\", ", self->rname); - seq_printf(m, "daddr: %08x, ", self->rdaddr); - seq_printf(m, "saddr: %08x\n", self->rsaddr); - - /* Second, get all the PPP info */ - seq_printf(m, " PPP state: %s", - (self->ppp_open ? "registered" : "unregistered")); - if(self->ppp_open) - { - seq_printf(m, ", unit: ppp%d", - ppp_unit_number(&self->chan)); - seq_printf(m, ", channel: %d", - ppp_channel_index(&self->chan)); - seq_printf(m, ", mru: %d", - self->mru); - /* Maybe add self->flags ? Later... */ - } - - /* Then, get all the IrDA specific info... */ - if(self->ttp_open) - state = "connected"; - else - if(self->tsap != NULL) - state = "connecting"; - else - if(self->iriap != NULL) - state = "searching"; - else - if(self->ttp_connect) - state = "weird"; - else - state = "idle"; - seq_printf(m, "\n IrDA state: %s, ", state); - seq_printf(m, "daddr: %08x, ", self->daddr); - seq_printf(m, "stsap_sel: %02x, ", self->stsap_sel); - seq_printf(m, "dtsap_sel: %02x\n", self->dtsap_sel); - - /* Next socket, please... */ - self = (irnet_socket *) hashbin_get_next(irnet_server.list); - } - - /* Spin lock end */ - spin_unlock_bh(&irnet_server.spinlock); - - return 0; -} - -static int irnet_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, irnet_proc_show, NULL); -} - -static const struct file_operations irnet_proc_fops = { - .owner = THIS_MODULE, - .open = irnet_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* PROC_FS */ - - -/********************** CONFIGURATION/CLEANUP **********************/ -/* - * Initialisation and teardown of the IrDA part, called at module - * insertion and removal... - */ - -/*------------------------------------------------------------------*/ -/* - * Prepare the IrNET layer for operation... - */ -int __init -irda_irnet_init(void) -{ - int err = 0; - - DENTER(MODULE_TRACE, "()\n"); - - /* Pure paranoia - should be redundant */ - memset(&irnet_server, 0, sizeof(struct irnet_root)); - - /* Setup start of irnet instance list */ - irnet_server.list = hashbin_new(HB_NOLOCK); - DABORT(irnet_server.list == NULL, -ENOMEM, - MODULE_ERROR, "Can't allocate hashbin!\n"); - /* Init spinlock for instance list */ - spin_lock_init(&irnet_server.spinlock); - - /* Initialise control channel */ - init_waitqueue_head(&irnet_events.rwait); - irnet_events.index = 0; - /* Init spinlock for event logging */ - spin_lock_init(&irnet_events.spinlock); - -#ifdef CONFIG_PROC_FS - /* Add a /proc file for irnet infos */ - proc_create("irnet", 0, proc_irda, &irnet_proc_fops); -#endif /* CONFIG_PROC_FS */ - - /* Setup the IrNET server */ - err = irnet_setup_server(); - - if(!err) - /* We are no longer functional... */ - irnet_server.running = 1; - - DEXIT(MODULE_TRACE, "\n"); - return err; -} - -/*------------------------------------------------------------------*/ -/* - * Cleanup at exit... - */ -void __exit -irda_irnet_cleanup(void) -{ - DENTER(MODULE_TRACE, "()\n"); - - /* We are no longer there... */ - irnet_server.running = 0; - -#ifdef CONFIG_PROC_FS - /* Remove our /proc file */ - remove_proc_entry("irnet", proc_irda); -#endif /* CONFIG_PROC_FS */ - - /* Remove our IrNET server from existence */ - irnet_destroy_server(); - - /* Remove all instances of IrNET socket still present */ - hashbin_delete(irnet_server.list, (FREE_FUNC) irda_irnet_destroy); - - DEXIT(MODULE_TRACE, "\n"); -} diff --git a/net/irda/irnet/irnet_irda.h b/net/irda/irnet/irnet_irda.h deleted file mode 100644 index 3e408952a3f1..000000000000 --- a/net/irda/irnet/irnet_irda.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * IrNET protocol module : Synchronous PPP over an IrDA socket. - * - * Jean II - HPL `00 - <jt@hpl.hp.com> - * - * This file contains all definitions and declarations necessary for the - * IRDA part of the IrNET module (dealing with IrTTP, IrIAS and co). - * This file is a private header, so other modules don't want to know - * what's in there... - */ - -#ifndef IRNET_IRDA_H -#define IRNET_IRDA_H - -/***************************** INCLUDES *****************************/ -/* Please add other headers in irnet.h */ - -#include "irnet.h" /* Module global include */ - -/************************ CONSTANTS & MACROS ************************/ - -/* - * Name of the service (socket name) used by IrNET - */ -/* IAS object name (or part of it) */ -#define IRNET_SERVICE_NAME "IrNetv1" -/* IAS attribute */ -#define IRNET_IAS_VALUE "IrDA:TinyTP:LsapSel" -/* LMP notify name for client (only for /proc/net/irda/irlmp) */ -#define IRNET_NOTIFY_NAME "IrNET socket" -/* LMP notify name for server (only for /proc/net/irda/irlmp) */ -#define IRNET_NOTIFY_NAME_SERV "IrNET server" - -/****************************** TYPES ******************************/ - -/* - * This is the main structure where we store all the data pertaining to - * the IrNET server (listen for connection requests) and the root - * of the IrNET socket list - */ -typedef struct irnet_root -{ - irnet_socket s; /* To pretend we are a client... */ - - /* Generic stuff */ - int magic; /* Paranoia */ - int running; /* Are we operational ? */ - - /* Link list of all IrNET instances opened */ - hashbin_t * list; - spinlock_t spinlock; /* Serialize access to the list */ - /* Note : the way hashbin has been designed is absolutely not - * reentrant, beware... So, we blindly protect all with spinlock */ - - /* Handle for the hint bit advertised in IrLMP */ - void * skey; - - /* Server socket part */ - struct ias_object * ias_obj; /* Our service name + lsap in IAS */ - -} irnet_root; - - -/**************************** PROTOTYPES ****************************/ - -/* ----------------------- CONTROL CHANNEL ----------------------- */ -static void - irnet_post_event(irnet_socket *, - irnet_event, - __u32, - __u32, - char *, - __u16); -/* ----------------------- IRDA SUBROUTINES ----------------------- */ -static inline int - irnet_open_tsap(irnet_socket *); -static inline __u8 - irnet_ias_to_tsap(irnet_socket *, - int, - struct ias_value *); -static inline int - irnet_find_lsap_sel(irnet_socket *); -static inline int - irnet_connect_tsap(irnet_socket *); -static inline int - irnet_discover_next_daddr(irnet_socket *); -static inline int - irnet_discover_daddr_and_lsap_sel(irnet_socket *); -static inline int - irnet_dname_to_daddr(irnet_socket *); -/* ------------------------ SERVER SOCKET ------------------------ */ -static inline int - irnet_daddr_to_dname(irnet_socket *); -static inline irnet_socket * - irnet_find_socket(irnet_socket *); -static inline int - irnet_connect_socket(irnet_socket *, - irnet_socket *, - struct qos_info *, - __u32, - __u8); -static inline void - irnet_disconnect_server(irnet_socket *, - struct sk_buff *); -static inline int - irnet_setup_server(void); -static inline void - irnet_destroy_server(void); -/* ---------------------- IRDA-TTP CALLBACKS ---------------------- */ -static int - irnet_data_indication(void *, /* instance */ - void *, /* sap */ - struct sk_buff *); -static void - irnet_disconnect_indication(void *, - void *, - LM_REASON, - struct sk_buff *); -static void - irnet_connect_confirm(void *, - void *, - struct qos_info *, - __u32, - __u8, - struct sk_buff *); -static void - irnet_flow_indication(void *, - void *, - LOCAL_FLOW); -static void - irnet_status_indication(void *, - LINK_STATUS, - LOCK_STATUS); -static void - irnet_connect_indication(void *, - void *, - struct qos_info *, - __u32, - __u8, - struct sk_buff *); -/* -------------------- IRDA-IAS/LMP CALLBACKS -------------------- */ -static void - irnet_getvalue_confirm(int, - __u16, - struct ias_value *, - void *); -static void - irnet_discovervalue_confirm(int, - __u16, - struct ias_value *, - void *); -#ifdef DISCOVERY_EVENTS -static void - irnet_discovery_indication(discinfo_t *, - DISCOVERY_MODE, - void *); -static void - irnet_expiry_indication(discinfo_t *, - DISCOVERY_MODE, - void *); -#endif - -/**************************** VARIABLES ****************************/ - -/* - * The IrNET server. Listen to connection requests and co... - */ -static struct irnet_root irnet_server; - -/* Control channel stuff (note : extern) */ -struct irnet_ctrl_channel irnet_events; - -/* The /proc/net/irda directory, defined elsewhere... */ -#ifdef CONFIG_PROC_FS -extern struct proc_dir_entry *proc_irda; -#endif /* CONFIG_PROC_FS */ - -#endif /* IRNET_IRDA_H */ diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c deleted file mode 100644 index 7025dcb853d0..000000000000 --- a/net/irda/irnet/irnet_ppp.c +++ /dev/null @@ -1,1189 +0,0 @@ -/* - * IrNET protocol module : Synchronous PPP over an IrDA socket. - * - * Jean II - HPL `00 - <jt@hpl.hp.com> - * - * This file implement the PPP interface and /dev/irnet character device. - * The PPP interface hook to the ppp_generic module, handle all our - * relationship to the PPP code in the kernel (and by extension to pppd), - * and exchange PPP frames with this module (send/receive). - * The /dev/irnet device is used primarily for 2 functions : - * 1) as a stub for pppd (the ppp daemon), so that we can appropriately - * generate PPP sessions (we pretend we are a tty). - * 2) as a control channel (write commands, read events) - */ - -#include <linux/sched/signal.h> -#include <linux/slab.h> - -#include "irnet_ppp.h" /* Private header */ -/* Please put other headers in irnet.h - Thanks */ - -/* Generic PPP callbacks (to call us) */ -static const struct ppp_channel_ops irnet_ppp_ops = { - .start_xmit = ppp_irnet_send, - .ioctl = ppp_irnet_ioctl -}; - -/************************* CONTROL CHANNEL *************************/ -/* - * When a pppd instance is not active on /dev/irnet, it acts as a control - * channel. - * Writing allow to set up the IrDA destination of the IrNET channel, - * and any application may be read events happening in IrNET... - */ - -/*------------------------------------------------------------------*/ -/* - * Write is used to send a command to configure a IrNET channel - * before it is open by pppd. The syntax is : "command argument" - * Currently there is only two defined commands : - * o name : set the requested IrDA nickname of the IrNET peer. - * o addr : set the requested IrDA address of the IrNET peer. - * Note : the code is crude, but effective... - */ -static inline ssize_t -irnet_ctrl_write(irnet_socket * ap, - const char __user *buf, - size_t count) -{ - char command[IRNET_MAX_COMMAND]; - char * start; /* Current command being processed */ - char * next; /* Next command to process */ - int length; /* Length of current command */ - - DENTER(CTRL_TRACE, "(ap=0x%p, count=%zd)\n", ap, count); - - /* Check for overflow... */ - DABORT(count >= IRNET_MAX_COMMAND, -ENOMEM, - CTRL_ERROR, "Too much data !!!\n"); - - /* Get the data in the driver */ - if(copy_from_user(command, buf, count)) - { - DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); - return -EFAULT; - } - - /* Safe terminate the string */ - command[count] = '\0'; - DEBUG(CTRL_INFO, "Command line received is ``%s'' (%zd).\n", - command, count); - - /* Check every commands in the command line */ - next = command; - while(next != NULL) - { - /* Look at the next command */ - start = next; - - /* Scrap whitespaces before the command */ - start = skip_spaces(start); - - /* ',' is our command separator */ - next = strchr(start, ','); - if(next) - { - *next = '\0'; /* Terminate command */ - length = next - start; /* Length */ - next++; /* Skip the '\0' */ - } - else - length = strlen(start); - - DEBUG(CTRL_INFO, "Found command ``%s'' (%d).\n", start, length); - - /* Check if we recognised one of the known command - * We can't use "switch" with strings, so hack with "continue" */ - - /* First command : name -> Requested IrDA nickname */ - if(!strncmp(start, "name", 4)) - { - /* Copy the name only if is included and not "any" */ - if((length > 5) && (strcmp(start + 5, "any"))) - { - /* Strip out trailing whitespaces */ - while(isspace(start[length - 1])) - length--; - - DABORT(length < 5 || length > NICKNAME_MAX_LEN + 5, - -EINVAL, CTRL_ERROR, "Invalid nickname.\n"); - - /* Copy the name for later reuse */ - memcpy(ap->rname, start + 5, length - 5); - ap->rname[length - 5] = '\0'; - } - else - ap->rname[0] = '\0'; - DEBUG(CTRL_INFO, "Got rname = ``%s''\n", ap->rname); - - /* Restart the loop */ - continue; - } - - /* Second command : addr, daddr -> Requested IrDA destination address - * Also process : saddr -> Requested IrDA source address */ - if((!strncmp(start, "addr", 4)) || - (!strncmp(start, "daddr", 5)) || - (!strncmp(start, "saddr", 5))) - { - __u32 addr = DEV_ADDR_ANY; - - /* Copy the address only if is included and not "any" */ - if((length > 5) && (strcmp(start + 5, "any"))) - { - char * begp = start + 5; - char * endp; - - /* Scrap whitespaces before the command */ - begp = skip_spaces(begp); - - /* Convert argument to a number (last arg is the base) */ - addr = simple_strtoul(begp, &endp, 16); - /* Has it worked ? (endp should be start + length) */ - DABORT(endp <= (start + 5), -EINVAL, - CTRL_ERROR, "Invalid address.\n"); - } - /* Which type of address ? */ - if(start[0] == 's') - { - /* Save it */ - ap->rsaddr = addr; - DEBUG(CTRL_INFO, "Got rsaddr = %08x\n", ap->rsaddr); - } - else - { - /* Save it */ - ap->rdaddr = addr; - DEBUG(CTRL_INFO, "Got rdaddr = %08x\n", ap->rdaddr); - } - - /* Restart the loop */ - continue; - } - - /* Other possible command : connect N (number of retries) */ - - /* No command matched -> Failed... */ - DABORT(1, -EINVAL, CTRL_ERROR, "Not a recognised IrNET command.\n"); - } - - /* Success : we have parsed all commands successfully */ - return count; -} - -#ifdef INITIAL_DISCOVERY -/*------------------------------------------------------------------*/ -/* - * Function irnet_get_discovery_log (self) - * - * Query the content on the discovery log if not done - * - * This function query the current content of the discovery log - * at the startup of the event channel and save it in the internal struct. - */ -static void -irnet_get_discovery_log(irnet_socket * ap) -{ - __u16 mask = irlmp_service_to_hint(S_LAN); - - /* Ask IrLMP for the current discovery log */ - ap->discoveries = irlmp_get_discoveries(&ap->disco_number, mask, - DISCOVERY_DEFAULT_SLOTS); - - /* Check if the we got some results */ - if(ap->discoveries == NULL) - ap->disco_number = -1; - - DEBUG(CTRL_INFO, "Got the log (0x%p), size is %d\n", - ap->discoveries, ap->disco_number); -} - -/*------------------------------------------------------------------*/ -/* - * Function irnet_read_discovery_log (self, event) - * - * Read the content on the discovery log - * - * This function dump the current content of the discovery log - * at the startup of the event channel. - * Return 1 if wrote an event on the control channel... - * - * State of the ap->disco_XXX variables : - * Socket creation : discoveries = NULL ; disco_index = 0 ; disco_number = 0 - * While reading : discoveries = ptr ; disco_index = X ; disco_number = Y - * After reading : discoveries = NULL ; disco_index = Y ; disco_number = -1 - */ -static inline int -irnet_read_discovery_log(irnet_socket *ap, char *event, int buf_size) -{ - int done_event = 0; - - DENTER(CTRL_TRACE, "(ap=0x%p, event=0x%p)\n", - ap, event); - - /* Test if we have some work to do or we have already finished */ - if(ap->disco_number == -1) - { - DEBUG(CTRL_INFO, "Already done\n"); - return 0; - } - - /* Test if it's the first time and therefore we need to get the log */ - if(ap->discoveries == NULL) - irnet_get_discovery_log(ap); - - /* Check if we have more item to dump */ - if(ap->disco_index < ap->disco_number) - { - /* Write an event */ - snprintf(event, buf_size, - "Found %08x (%s) behind %08x {hints %02X-%02X}\n", - ap->discoveries[ap->disco_index].daddr, - ap->discoveries[ap->disco_index].info, - ap->discoveries[ap->disco_index].saddr, - ap->discoveries[ap->disco_index].hints[0], - ap->discoveries[ap->disco_index].hints[1]); - DEBUG(CTRL_INFO, "Writing discovery %d : %s\n", - ap->disco_index, ap->discoveries[ap->disco_index].info); - - /* We have an event */ - done_event = 1; - /* Next discovery */ - ap->disco_index++; - } - - /* Check if we have done the last item */ - if(ap->disco_index >= ap->disco_number) - { - /* No more items : remove the log and signal termination */ - DEBUG(CTRL_INFO, "Cleaning up log (0x%p)\n", - ap->discoveries); - if(ap->discoveries != NULL) - { - /* Cleanup our copy of the discovery log */ - kfree(ap->discoveries); - ap->discoveries = NULL; - } - ap->disco_number = -1; - } - - return done_event; -} -#endif /* INITIAL_DISCOVERY */ - -/*------------------------------------------------------------------*/ -/* - * Read is used to get IrNET events - */ -static inline ssize_t -irnet_ctrl_read(irnet_socket * ap, - struct file * file, - char __user * buf, - size_t count) -{ - DECLARE_WAITQUEUE(wait, current); - char event[75]; - ssize_t ret = 0; - - DENTER(CTRL_TRACE, "(ap=0x%p, count=%zd)\n", ap, count); - -#ifdef INITIAL_DISCOVERY - /* Check if we have read the log */ - if (irnet_read_discovery_log(ap, event, sizeof(event))) - { - count = min(strlen(event), count); - if (copy_to_user(buf, event, count)) - { - DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); - return -EFAULT; - } - - DEXIT(CTRL_TRACE, "\n"); - return count; - } -#endif /* INITIAL_DISCOVERY */ - - /* Put ourselves on the wait queue to be woken up */ - add_wait_queue(&irnet_events.rwait, &wait); - set_current_state(TASK_INTERRUPTIBLE); - for(;;) - { - /* If there is unread events */ - ret = 0; - if(ap->event_index != irnet_events.index) - break; - ret = -EAGAIN; - if(file->f_flags & O_NONBLOCK) - break; - ret = -ERESTARTSYS; - if(signal_pending(current)) - break; - /* Yield and wait to be woken up */ - schedule(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&irnet_events.rwait, &wait); - - /* Did we got it ? */ - if(ret != 0) - { - /* No, return the error code */ - DEXIT(CTRL_TRACE, " - ret %zd\n", ret); - return ret; - } - - /* Which event is it ? */ - switch(irnet_events.log[ap->event_index].event) - { - case IRNET_DISCOVER: - snprintf(event, sizeof(event), - "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].saddr, - irnet_events.log[ap->event_index].hints.byte[0], - irnet_events.log[ap->event_index].hints.byte[1]); - break; - case IRNET_EXPIRE: - snprintf(event, sizeof(event), - "Expired %08x (%s) behind %08x {hints %02X-%02X}\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].saddr, - irnet_events.log[ap->event_index].hints.byte[0], - irnet_events.log[ap->event_index].hints.byte[1]); - break; - case IRNET_CONNECT_TO: - snprintf(event, sizeof(event), "Connected to %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); - break; - case IRNET_CONNECT_FROM: - snprintf(event, sizeof(event), "Connection from %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); - break; - case IRNET_REQUEST_FROM: - snprintf(event, sizeof(event), "Request from %08x (%s) behind %08x\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].saddr); - break; - case IRNET_NOANSWER_FROM: - snprintf(event, sizeof(event), "No-answer from %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); - break; - case IRNET_BLOCKED_LINK: - snprintf(event, sizeof(event), "Blocked link with %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); - break; - case IRNET_DISCONNECT_FROM: - snprintf(event, sizeof(event), "Disconnection from %08x (%s) on ppp%d\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name, - irnet_events.log[ap->event_index].unit); - break; - case IRNET_DISCONNECT_TO: - snprintf(event, sizeof(event), "Disconnected to %08x (%s)\n", - irnet_events.log[ap->event_index].daddr, - irnet_events.log[ap->event_index].name); - break; - default: - snprintf(event, sizeof(event), "Bug\n"); - } - /* Increment our event index */ - ap->event_index = (ap->event_index + 1) % IRNET_MAX_EVENTS; - - DEBUG(CTRL_INFO, "Event is :%s", event); - - count = min(strlen(event), count); - if (copy_to_user(buf, event, count)) - { - DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); - return -EFAULT; - } - - DEXIT(CTRL_TRACE, "\n"); - return count; -} - -/*------------------------------------------------------------------*/ -/* - * Poll : called when someone do a select on /dev/irnet. - * Just check if there are new events... - */ -static inline unsigned int -irnet_ctrl_poll(irnet_socket * ap, - struct file * file, - poll_table * wait) -{ - unsigned int mask; - - DENTER(CTRL_TRACE, "(ap=0x%p)\n", ap); - - poll_wait(file, &irnet_events.rwait, wait); - mask = POLLOUT | POLLWRNORM; - /* If there is unread events */ - if(ap->event_index != irnet_events.index) - mask |= POLLIN | POLLRDNORM; -#ifdef INITIAL_DISCOVERY - if(ap->disco_number != -1) - { - /* Test if it's the first time and therefore we need to get the log */ - if(ap->discoveries == NULL) - irnet_get_discovery_log(ap); - /* Recheck */ - if(ap->disco_number != -1) - mask |= POLLIN | POLLRDNORM; - } -#endif /* INITIAL_DISCOVERY */ - - DEXIT(CTRL_TRACE, " - mask=0x%X\n", mask); - return mask; -} - - -/*********************** FILESYSTEM CALLBACKS ***********************/ -/* - * Implement the usual open, read, write functions that will be called - * by the file system when some action is performed on /dev/irnet. - * Most of those actions will in fact be performed by "pppd" or - * the control channel, we just act as a redirector... - */ - -/*------------------------------------------------------------------*/ -/* - * Open : when somebody open /dev/irnet - * We basically create a new instance of irnet and initialise it. - */ -static int -dev_irnet_open(struct inode * inode, - struct file * file) -{ - struct irnet_socket * ap; - int err; - - DENTER(FS_TRACE, "(file=0x%p)\n", file); - -#ifdef SECURE_DEVIRNET - /* This could (should?) be enforced by the permissions on /dev/irnet. */ - if(!capable(CAP_NET_ADMIN)) - return -EPERM; -#endif /* SECURE_DEVIRNET */ - - /* Allocate a private structure for this IrNET instance */ - ap = kzalloc(sizeof(*ap), GFP_KERNEL); - DABORT(ap == NULL, -ENOMEM, FS_ERROR, "Can't allocate struct irnet...\n"); - - /* initialize the irnet structure */ - ap->file = file; - - /* PPP channel setup */ - ap->ppp_open = 0; - ap->chan.private = ap; - ap->chan.ops = &irnet_ppp_ops; - ap->chan.mtu = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN); - ap->chan.hdrlen = 2 + TTP_MAX_HEADER; /* for A/C + Max IrDA hdr */ - /* PPP parameters */ - ap->mru = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN); - ap->xaccm[0] = ~0U; - ap->xaccm[3] = 0x60000000U; - ap->raccm = ~0U; - - /* Setup the IrDA part... */ - err = irda_irnet_create(ap); - if(err) - { - DERROR(FS_ERROR, "Can't setup IrDA link...\n"); - kfree(ap); - - return err; - } - - /* For the control channel */ - ap->event_index = irnet_events.index; /* Cancel all past events */ - - mutex_init(&ap->lock); - - /* Put our stuff where we will be able to find it later */ - file->private_data = ap; - - DEXIT(FS_TRACE, " - ap=0x%p\n", ap); - - return 0; -} - - -/*------------------------------------------------------------------*/ -/* - * Close : when somebody close /dev/irnet - * Destroy the instance of /dev/irnet - */ -static int -dev_irnet_close(struct inode * inode, - struct file * file) -{ - irnet_socket * ap = file->private_data; - - DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n", - file, ap); - DABORT(ap == NULL, 0, FS_ERROR, "ap is NULL !!!\n"); - - /* Detach ourselves */ - file->private_data = NULL; - - /* Close IrDA stuff */ - irda_irnet_destroy(ap); - - /* Disconnect from the generic PPP layer if not already done */ - if(ap->ppp_open) - { - DERROR(FS_ERROR, "Channel still registered - deregistering !\n"); - ap->ppp_open = 0; - ppp_unregister_channel(&ap->chan); - } - - kfree(ap); - - DEXIT(FS_TRACE, "\n"); - return 0; -} - -/*------------------------------------------------------------------*/ -/* - * Write does nothing. - * (we receive packet from ppp_generic through ppp_irnet_send()) - */ -static ssize_t -dev_irnet_write(struct file * file, - const char __user *buf, - size_t count, - loff_t * ppos) -{ - irnet_socket * ap = file->private_data; - - DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%zd)\n", - file, ap, count); - DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n"); - - /* If we are connected to ppp_generic, let it handle the job */ - if(ap->ppp_open) - return -EAGAIN; - else - return irnet_ctrl_write(ap, buf, count); -} - -/*------------------------------------------------------------------*/ -/* - * Read doesn't do much either. - * (pppd poll us, but ultimately reads through /dev/ppp) - */ -static ssize_t -dev_irnet_read(struct file * file, - char __user * buf, - size_t count, - loff_t * ppos) -{ - irnet_socket * ap = file->private_data; - - DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%zd)\n", - file, ap, count); - DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n"); - - /* If we are connected to ppp_generic, let it handle the job */ - if(ap->ppp_open) - return -EAGAIN; - else - return irnet_ctrl_read(ap, file, buf, count); -} - -/*------------------------------------------------------------------*/ -/* - * Poll : called when someone do a select on /dev/irnet - */ -static unsigned int -dev_irnet_poll(struct file * file, - poll_table * wait) -{ - irnet_socket * ap = file->private_data; - unsigned int mask; - - DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n", - file, ap); - - mask = POLLOUT | POLLWRNORM; - DABORT(ap == NULL, mask, FS_ERROR, "ap is NULL !!!\n"); - - /* If we are connected to ppp_generic, let it handle the job */ - if(!ap->ppp_open) - mask |= irnet_ctrl_poll(ap, file, wait); - - DEXIT(FS_TRACE, " - mask=0x%X\n", mask); - return mask; -} - -/*------------------------------------------------------------------*/ -/* - * IOCtl : Called when someone does some ioctls on /dev/irnet - * This is the way pppd configure us and control us while the PPP - * instance is active. - */ -static long -dev_irnet_ioctl( - struct file * file, - unsigned int cmd, - unsigned long arg) -{ - irnet_socket * ap = file->private_data; - int err; - int val; - void __user *argp = (void __user *)arg; - - DENTER(FS_TRACE, "(file=0x%p, ap=0x%p, cmd=0x%X)\n", - file, ap, cmd); - - /* Basic checks... */ - DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n"); -#ifdef SECURE_DEVIRNET - if(!capable(CAP_NET_ADMIN)) - return -EPERM; -#endif /* SECURE_DEVIRNET */ - - err = -EFAULT; - switch(cmd) - { - /* Set discipline (should be N_SYNC_PPP or N_TTY) */ - case TIOCSETD: - if(get_user(val, (int __user *)argp)) - break; - if((val == N_SYNC_PPP) || (val == N_PPP)) - { - DEBUG(FS_INFO, "Entering PPP discipline.\n"); - /* PPP channel setup (ap->chan in configured in dev_irnet_open())*/ - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - - err = ppp_register_channel(&ap->chan); - if(err == 0) - { - /* Our ppp side is active */ - ap->ppp_open = 1; - - DEBUG(FS_INFO, "Trying to establish a connection.\n"); - /* Setup the IrDA link now - may fail... */ - irda_irnet_connect(ap); - } - else - DERROR(FS_ERROR, "Can't setup PPP channel...\n"); - - mutex_unlock(&ap->lock); - } - else - { - /* In theory, should be N_TTY */ - DEBUG(FS_INFO, "Exiting PPP discipline.\n"); - /* Disconnect from the generic PPP layer */ - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - - if(ap->ppp_open) - { - ap->ppp_open = 0; - ppp_unregister_channel(&ap->chan); - } - else - DERROR(FS_ERROR, "Channel not registered !\n"); - err = 0; - - mutex_unlock(&ap->lock); - } - break; - - /* Query PPP channel and unit number */ - case PPPIOCGCHAN: - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - - if(ap->ppp_open && !put_user(ppp_channel_index(&ap->chan), - (int __user *)argp)) - err = 0; - - mutex_unlock(&ap->lock); - break; - case PPPIOCGUNIT: - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - - if(ap->ppp_open && !put_user(ppp_unit_number(&ap->chan), - (int __user *)argp)) - err = 0; - - mutex_unlock(&ap->lock); - break; - - /* All these ioctls can be passed both directly and from ppp_generic, - * so we just deal with them in one place... - */ - case PPPIOCGFLAGS: - case PPPIOCSFLAGS: - case PPPIOCGASYNCMAP: - case PPPIOCSASYNCMAP: - case PPPIOCGRASYNCMAP: - case PPPIOCSRASYNCMAP: - case PPPIOCGXASYNCMAP: - case PPPIOCSXASYNCMAP: - case PPPIOCGMRU: - case PPPIOCSMRU: - DEBUG(FS_INFO, "Standard PPP ioctl.\n"); - if(!capable(CAP_NET_ADMIN)) - err = -EPERM; - else { - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - - err = ppp_irnet_ioctl(&ap->chan, cmd, arg); - - mutex_unlock(&ap->lock); - } - break; - - /* TTY IOCTLs : Pretend that we are a tty, to keep pppd happy */ - /* Get termios */ - case TCGETS: - DEBUG(FS_INFO, "Get termios.\n"); - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - -#ifndef TCGETS2 - if(!kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios)) - err = 0; -#else - if(kernel_termios_to_user_termios_1((struct termios __user *)argp, &ap->termios)) - err = 0; -#endif - - mutex_unlock(&ap->lock); - break; - /* Set termios */ - case TCSETSF: - DEBUG(FS_INFO, "Set termios.\n"); - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - -#ifndef TCGETS2 - if(!user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp)) - err = 0; -#else - if(!user_termios_to_kernel_termios_1(&ap->termios, (struct termios __user *)argp)) - err = 0; -#endif - - mutex_unlock(&ap->lock); - break; - - /* Set DTR/RTS */ - case TIOCMBIS: - case TIOCMBIC: - /* Set exclusive/non-exclusive mode */ - case TIOCEXCL: - case TIOCNXCL: - DEBUG(FS_INFO, "TTY compatibility.\n"); - err = 0; - break; - - case TCGETA: - DEBUG(FS_INFO, "TCGETA\n"); - break; - - case TCFLSH: - DEBUG(FS_INFO, "TCFLSH\n"); - /* Note : this will flush buffers in PPP, so it *must* be done - * We should also worry that we don't accept junk here and that - * we get rid of our own buffers */ -#ifdef FLUSH_TO_PPP - if (mutex_lock_interruptible(&ap->lock)) - return -EINTR; - ppp_output_wakeup(&ap->chan); - mutex_unlock(&ap->lock); -#endif /* FLUSH_TO_PPP */ - err = 0; - break; - - case FIONREAD: - DEBUG(FS_INFO, "FIONREAD\n"); - val = 0; - if(put_user(val, (int __user *)argp)) - break; - err = 0; - break; - - default: - DERROR(FS_ERROR, "Unsupported ioctl (0x%X)\n", cmd); - err = -ENOTTY; - } - - DEXIT(FS_TRACE, " - err = 0x%X\n", err); - return err; -} - -/************************** PPP CALLBACKS **************************/ -/* - * This are the functions that the generic PPP driver in the kernel - * will call to communicate to us. - */ - -/*------------------------------------------------------------------*/ -/* - * Prepare the ppp frame for transmission over the IrDA socket. - * We make sure that the header space is enough, and we change ppp header - * according to flags passed by pppd. - * This is not a callback, but just a helper function used in ppp_irnet_send() - */ -static inline struct sk_buff * -irnet_prepare_skb(irnet_socket * ap, - struct sk_buff * skb) -{ - unsigned char * data; - int proto; /* PPP protocol */ - int islcp; /* Protocol == LCP */ - int needaddr; /* Need PPP address */ - - DENTER(PPP_TRACE, "(ap=0x%p, skb=0x%p)\n", - ap, skb); - - /* Extract PPP protocol from the frame */ - data = skb->data; - proto = (data[0] << 8) + data[1]; - - /* LCP packets with codes between 1 (configure-request) - * and 7 (code-reject) must be sent as though no options - * have been negotiated. */ - islcp = (proto == PPP_LCP) && (1 <= data[2]) && (data[2] <= 7); - - /* compress protocol field if option enabled */ - if((data[0] == 0) && (ap->flags & SC_COMP_PROT) && (!islcp)) - skb_pull(skb,1); - - /* Check if we need address/control fields */ - needaddr = 2*((ap->flags & SC_COMP_AC) == 0 || islcp); - - /* Is the skb headroom large enough to contain all IrDA-headers? */ - if((skb_headroom(skb) < (ap->max_header_size + needaddr)) || - (skb_shared(skb))) - { - struct sk_buff * new_skb; - - DEBUG(PPP_INFO, "Reallocating skb\n"); - - /* Create a new skb */ - new_skb = skb_realloc_headroom(skb, ap->max_header_size + needaddr); - - /* We have to free the original skb anyway */ - dev_kfree_skb(skb); - - /* Did the realloc succeed ? */ - DABORT(new_skb == NULL, NULL, PPP_ERROR, "Could not realloc skb\n"); - - /* Use the new skb instead */ - skb = new_skb; - } - - /* prepend address/control fields if necessary */ - if(needaddr) - { - skb_push(skb, 2); - skb->data[0] = PPP_ALLSTATIONS; - skb->data[1] = PPP_UI; - } - - DEXIT(PPP_TRACE, "\n"); - - return skb; -} - -/*------------------------------------------------------------------*/ -/* - * Send a packet to the peer over the IrTTP connection. - * Returns 1 iff the packet was accepted. - * Returns 0 iff packet was not consumed. - * If the packet was not accepted, we will call ppp_output_wakeup - * at some later time to reactivate flow control in ppp_generic. - */ -static int -ppp_irnet_send(struct ppp_channel * chan, - struct sk_buff * skb) -{ - irnet_socket * self = (struct irnet_socket *) chan->private; - int ret; - - DENTER(PPP_TRACE, "(channel=0x%p, ap/self=0x%p)\n", - chan, self); - - /* Check if things are somewhat valid... */ - DASSERT(self != NULL, 0, PPP_ERROR, "Self is NULL !!!\n"); - - /* Check if we are connected */ - if(!(test_bit(0, &self->ttp_open))) - { -#ifdef CONNECT_IN_SEND - /* Let's try to connect one more time... */ - /* Note : we won't be connected after this call, but we should be - * ready for next packet... */ - /* If we are already connecting, this will fail */ - irda_irnet_connect(self); -#endif /* CONNECT_IN_SEND */ - - DEBUG(PPP_INFO, "IrTTP not ready ! (%ld-%ld)\n", - self->ttp_open, self->ttp_connect); - - /* Note : we can either drop the packet or block the packet. - * - * Blocking the packet allow us a better connection time, - * because by calling ppp_output_wakeup() we can have - * ppp_generic resending the LCP request immediately to us, - * rather than waiting for one of pppd periodic transmission of - * LCP request. - * - * On the other hand, if we block all packet, all those periodic - * transmissions of pppd accumulate in ppp_generic, creating a - * backlog of LCP request. When we eventually connect later on, - * we have to transmit all this backlog before we can connect - * proper (if we don't timeout before). - * - * The current strategy is as follow : - * While we are attempting to connect, we block packets to get - * a better connection time. - * If we fail to connect, we drain the queue and start dropping packets - */ -#ifdef BLOCK_WHEN_CONNECT - /* If we are attempting to connect */ - if(test_bit(0, &self->ttp_connect)) - { - /* Blocking packet, ppp_generic will retry later */ - return 0; - } -#endif /* BLOCK_WHEN_CONNECT */ - - /* Dropping packet, pppd will retry later */ - dev_kfree_skb(skb); - return 1; - } - - /* Check if the queue can accept any packet, otherwise block */ - if(self->tx_flow != FLOW_START) - DRETURN(0, PPP_INFO, "IrTTP queue full (%d skbs)...\n", - skb_queue_len(&self->tsap->tx_queue)); - - /* Prepare ppp frame for transmission */ - skb = irnet_prepare_skb(self, skb); - DABORT(skb == NULL, 1, PPP_ERROR, "Prepare skb for Tx failed.\n"); - - /* Send the packet to IrTTP */ - ret = irttp_data_request(self->tsap, skb); - if(ret < 0) - { - /* - * > IrTTPs tx queue is full, so we just have to - * > drop the frame! You might think that we should - * > just return -1 and don't deallocate the frame, - * > but that is dangerous since it's possible that - * > we have replaced the original skb with a new - * > one with larger headroom, and that would really - * > confuse do_dev_queue_xmit() in dev.c! I have - * > tried :-) DB - * Correction : we verify the flow control above (self->tx_flow), - * so we come here only if IrTTP doesn't like the packet (empty, - * too large, IrTTP not connected). In those rare cases, it's ok - * to drop it, we don't want to see it here again... - * Jean II - */ - DERROR(PPP_ERROR, "IrTTP doesn't like this packet !!! (0x%X)\n", ret); - /* irttp_data_request already free the packet */ - } - - DEXIT(PPP_TRACE, "\n"); - return 1; /* Packet has been consumed */ -} - -/*------------------------------------------------------------------*/ -/* - * Take care of the ioctls that ppp_generic doesn't want to deal with... - * Note : we are also called from dev_irnet_ioctl(). - */ -static int -ppp_irnet_ioctl(struct ppp_channel * chan, - unsigned int cmd, - unsigned long arg) -{ - irnet_socket * ap = (struct irnet_socket *) chan->private; - int err; - int val; - u32 accm[8]; - void __user *argp = (void __user *)arg; - - DENTER(PPP_TRACE, "(channel=0x%p, ap=0x%p, cmd=0x%X)\n", - chan, ap, cmd); - - /* Basic checks... */ - DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n"); - - err = -EFAULT; - switch(cmd) - { - /* PPP flags */ - case PPPIOCGFLAGS: - val = ap->flags | ap->rbits; - if(put_user(val, (int __user *) argp)) - break; - err = 0; - break; - case PPPIOCSFLAGS: - if(get_user(val, (int __user *) argp)) - break; - ap->flags = val & ~SC_RCV_BITS; - ap->rbits = val & SC_RCV_BITS; - err = 0; - break; - - /* Async map stuff - all dummy to please pppd */ - case PPPIOCGASYNCMAP: - if(put_user(ap->xaccm[0], (u32 __user *) argp)) - break; - err = 0; - break; - case PPPIOCSASYNCMAP: - if(get_user(ap->xaccm[0], (u32 __user *) argp)) - break; - err = 0; - break; - case PPPIOCGRASYNCMAP: - if(put_user(ap->raccm, (u32 __user *) argp)) - break; - err = 0; - break; - case PPPIOCSRASYNCMAP: - if(get_user(ap->raccm, (u32 __user *) argp)) - break; - err = 0; - break; - case PPPIOCGXASYNCMAP: - if(copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm))) - break; - err = 0; - break; - case PPPIOCSXASYNCMAP: - if(copy_from_user(accm, argp, sizeof(accm))) - break; - accm[2] &= ~0x40000000U; /* can't escape 0x5e */ - accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */ - memcpy(ap->xaccm, accm, sizeof(ap->xaccm)); - err = 0; - break; - - /* Max PPP frame size */ - case PPPIOCGMRU: - if(put_user(ap->mru, (int __user *) argp)) - break; - err = 0; - break; - case PPPIOCSMRU: - if(get_user(val, (int __user *) argp)) - break; - if(val < PPP_MRU) - val = PPP_MRU; - ap->mru = val; - err = 0; - break; - - default: - DEBUG(PPP_INFO, "Unsupported ioctl (0x%X)\n", cmd); - err = -ENOIOCTLCMD; - } - - DEXIT(PPP_TRACE, " - err = 0x%X\n", err); - return err; -} - -/************************** INITIALISATION **************************/ -/* - * Module initialisation and all that jazz... - */ - -/*------------------------------------------------------------------*/ -/* - * Hook our device callbacks in the filesystem, to connect our code - * to /dev/irnet - */ -static inline int __init -ppp_irnet_init(void) -{ - int err = 0; - - DENTER(MODULE_TRACE, "()\n"); - - /* Allocate ourselves as a minor in the misc range */ - err = misc_register(&irnet_misc_device); - - DEXIT(MODULE_TRACE, "\n"); - return err; -} - -/*------------------------------------------------------------------*/ -/* - * Cleanup at exit... - */ -static inline void __exit -ppp_irnet_cleanup(void) -{ - DENTER(MODULE_TRACE, "()\n"); - - /* De-allocate /dev/irnet minor in misc range */ - misc_deregister(&irnet_misc_device); - - DEXIT(MODULE_TRACE, "\n"); -} - -/*------------------------------------------------------------------*/ -/* - * Module main entry point - */ -static int __init -irnet_init(void) -{ - int err; - - /* Initialise both parts... */ - err = irda_irnet_init(); - if(!err) - err = ppp_irnet_init(); - return err; -} - -/*------------------------------------------------------------------*/ -/* - * Module exit - */ -static void __exit -irnet_cleanup(void) -{ - irda_irnet_cleanup(); - ppp_irnet_cleanup(); -} - -/*------------------------------------------------------------------*/ -/* - * Module magic - */ -module_init(irnet_init); -module_exit(irnet_cleanup); -MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>"); -MODULE_DESCRIPTION("IrNET : Synchronous PPP over IrDA"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(10, 187); diff --git a/net/irda/irnet/irnet_ppp.h b/net/irda/irnet/irnet_ppp.h deleted file mode 100644 index 32061442cc8e..000000000000 --- a/net/irda/irnet/irnet_ppp.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * IrNET protocol module : Synchronous PPP over an IrDA socket. - * - * Jean II - HPL `00 - <jt@hpl.hp.com> - * - * This file contains all definitions and declarations necessary for the - * PPP part of the IrNET module. - * This file is a private header, so other modules don't want to know - * what's in there... - */ - -#ifndef IRNET_PPP_H -#define IRNET_PPP_H - -/***************************** INCLUDES *****************************/ - -#include "irnet.h" /* Module global include */ -#include <linux/miscdevice.h> - -/************************ CONSTANTS & MACROS ************************/ - -/* IrNET control channel stuff */ -#define IRNET_MAX_COMMAND 256 /* Max length of a command line */ - -/* PPP hardcore stuff */ - -/* Bits in rbits (PPP flags in irnet struct) */ -#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP) - -/* Bit numbers in busy */ -#define XMIT_BUSY 0 -#define RECV_BUSY 1 -#define XMIT_WAKEUP 2 -#define XMIT_FULL 3 - -/* Queue management */ -#define PPPSYNC_MAX_RQLEN 32 /* arbitrary */ - -/****************************** TYPES ******************************/ - - -/**************************** PROTOTYPES ****************************/ - -/* ----------------------- CONTROL CHANNEL ----------------------- */ -static inline ssize_t - irnet_ctrl_write(irnet_socket *, - const char *, - size_t); -static inline ssize_t - irnet_ctrl_read(irnet_socket *, - struct file *, - char *, - size_t); -static inline unsigned int - irnet_ctrl_poll(irnet_socket *, - struct file *, - poll_table *); -/* ----------------------- CHARACTER DEVICE ----------------------- */ -static int - dev_irnet_open(struct inode *, /* fs callback : open */ - struct file *), - dev_irnet_close(struct inode *, - struct file *); -static ssize_t - dev_irnet_write(struct file *, - const char __user *, - size_t, - loff_t *), - dev_irnet_read(struct file *, - char __user *, - size_t, - loff_t *); -static unsigned int - dev_irnet_poll(struct file *, - poll_table *); -static long - dev_irnet_ioctl(struct file *, - unsigned int, - unsigned long); -/* ------------------------ PPP INTERFACE ------------------------ */ -static inline struct sk_buff * - irnet_prepare_skb(irnet_socket *, - struct sk_buff *); -static int - ppp_irnet_send(struct ppp_channel *, - struct sk_buff *); -static int - ppp_irnet_ioctl(struct ppp_channel *, - unsigned int, - unsigned long); - -/**************************** VARIABLES ****************************/ - -/* Filesystem callbacks (to call us) */ -static const struct file_operations irnet_device_fops = -{ - .owner = THIS_MODULE, - .read = dev_irnet_read, - .write = dev_irnet_write, - .poll = dev_irnet_poll, - .unlocked_ioctl = dev_irnet_ioctl, - .open = dev_irnet_open, - .release = dev_irnet_close, - .llseek = noop_llseek, - /* Also : llseek, readdir, mmap, flush, fsync, fasync, lock, readv, writev */ -}; - -/* Structure so that the misc major (drivers/char/misc.c) take care of us... */ -static struct miscdevice irnet_misc_device = -{ - .minor = IRNET_MINOR, - .name = "irnet", - .fops = &irnet_device_fops -}; - -#endif /* IRNET_PPP_H */ diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c deleted file mode 100644 index 7fc340e574cf..000000000000 --- a/net/irda/irnetlink.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * IrDA netlink layer, for stack configuration. - * - * Copyright (c) 2007 Samuel Ortiz <samuel@sortiz.org> - * - * Partly based on the 802.11 nelink implementation - * (see net/wireless/nl80211.c) which is: - * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/socket.h> -#include <linux/irda.h> -#include <linux/gfp.h> -#include <net/net_namespace.h> -#include <net/sock.h> -#include <net/irda/irda.h> -#include <net/irda/irlap.h> -#include <net/genetlink.h> - - - -static struct genl_family irda_nl_family; - -static struct net_device * ifname_to_netdev(struct net *net, struct genl_info *info) -{ - char * ifname; - - if (!info->attrs[IRDA_NL_ATTR_IFNAME]) - return NULL; - - ifname = nla_data(info->attrs[IRDA_NL_ATTR_IFNAME]); - - pr_debug("%s(): Looking for %s\n", __func__, ifname); - - return dev_get_by_name(net, ifname); -} - -static int irda_nl_set_mode(struct sk_buff *skb, struct genl_info *info) -{ - struct net_device * dev; - struct irlap_cb * irlap; - u32 mode; - - if (!info->attrs[IRDA_NL_ATTR_MODE]) - return -EINVAL; - - mode = nla_get_u32(info->attrs[IRDA_NL_ATTR_MODE]); - - pr_debug("%s(): Switching to mode: %d\n", __func__, mode); - - dev = ifname_to_netdev(&init_net, info); - if (!dev) - return -ENODEV; - - irlap = (struct irlap_cb *)dev->atalk_ptr; - if (!irlap) { - dev_put(dev); - return -ENODEV; - } - - irlap->mode = mode; - - dev_put(dev); - - return 0; -} - -static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info) -{ - struct net_device * dev; - struct irlap_cb * irlap; - struct sk_buff *msg; - void *hdr; - int ret = -ENOBUFS; - - dev = ifname_to_netdev(&init_net, info); - if (!dev) - return -ENODEV; - - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (!msg) { - dev_put(dev); - return -ENOMEM; - } - - irlap = (struct irlap_cb *)dev->atalk_ptr; - if (!irlap) { - ret = -ENODEV; - goto err_out; - } - - hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, - &irda_nl_family, 0, IRDA_NL_CMD_GET_MODE); - if (hdr == NULL) { - ret = -EMSGSIZE; - goto err_out; - } - - if(nla_put_string(msg, IRDA_NL_ATTR_IFNAME, - dev->name)) - goto err_out; - - if(nla_put_u32(msg, IRDA_NL_ATTR_MODE, irlap->mode)) - goto err_out; - - genlmsg_end(msg, hdr); - - return genlmsg_reply(msg, info); - - err_out: - nlmsg_free(msg); - dev_put(dev); - - return ret; -} - -static const struct nla_policy irda_nl_policy[IRDA_NL_ATTR_MAX + 1] = { - [IRDA_NL_ATTR_IFNAME] = { .type = NLA_NUL_STRING, - .len = IFNAMSIZ-1 }, - [IRDA_NL_ATTR_MODE] = { .type = NLA_U32 }, -}; - -static const struct genl_ops irda_nl_ops[] = { - { - .cmd = IRDA_NL_CMD_SET_MODE, - .doit = irda_nl_set_mode, - .policy = irda_nl_policy, - .flags = GENL_ADMIN_PERM, - }, - { - .cmd = IRDA_NL_CMD_GET_MODE, - .doit = irda_nl_get_mode, - .policy = irda_nl_policy, - /* can be retrieved by unprivileged users */ - }, - -}; - -static struct genl_family irda_nl_family __ro_after_init = { - .name = IRDA_NL_NAME, - .hdrsize = 0, - .version = IRDA_NL_VERSION, - .maxattr = IRDA_NL_CMD_MAX, - .module = THIS_MODULE, - .ops = irda_nl_ops, - .n_ops = ARRAY_SIZE(irda_nl_ops), -}; - -int __init irda_nl_register(void) -{ - return genl_register_family(&irda_nl_family); -} - -void irda_nl_unregister(void) -{ - genl_unregister_family(&irda_nl_family); -} diff --git a/net/irda/irproc.c b/net/irda/irproc.c deleted file mode 100644 index 77cfdde9d82f..000000000000 --- a/net/irda/irproc.c +++ /dev/null @@ -1,96 +0,0 @@ -/********************************************************************* - * - * Filename: irproc.c - * Version: 1.0 - * Description: Various entries in the /proc file system - * Status: Experimental. - * Author: Thomas Davis, <ratbert@radiks.net> - * Created at: Sat Feb 21 21:33:24 1998 - * Modified at: Sun Nov 14 08:54:54 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-1999, Dag Brattli <dagb@cs.uit.no> - * Copyright (c) 1998, Thomas Davis, <ratbert@radiks.net>, - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * I, Thomas Davis, provide no warranty for any of this software. - * This material is provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/module.h> -#include <linux/init.h> -#include <net/net_namespace.h> - -#include <net/irda/irda.h> -#include <net/irda/irlap.h> -#include <net/irda/irlmp.h> - -extern const struct file_operations discovery_seq_fops; -extern const struct file_operations irlap_seq_fops; -extern const struct file_operations irlmp_seq_fops; -extern const struct file_operations irttp_seq_fops; -extern const struct file_operations irias_seq_fops; - -struct irda_entry { - const char *name; - const struct file_operations *fops; -}; - -struct proc_dir_entry *proc_irda; -EXPORT_SYMBOL(proc_irda); - -static const struct irda_entry irda_dirs[] = { - {"discovery", &discovery_seq_fops}, - {"irttp", &irttp_seq_fops}, - {"irlmp", &irlmp_seq_fops}, - {"irlap", &irlap_seq_fops}, - {"irias", &irias_seq_fops}, -}; - -/* - * Function irda_proc_register (void) - * - * Register irda entry in /proc file system - * - */ -void __init irda_proc_register(void) -{ - int i; - - proc_irda = proc_mkdir("irda", init_net.proc_net); - if (proc_irda == NULL) - return; - - for (i = 0; i < ARRAY_SIZE(irda_dirs); i++) - (void) proc_create(irda_dirs[i].name, 0, proc_irda, - irda_dirs[i].fops); -} - -/* - * Function irda_proc_unregister (void) - * - * Unregister irda entry in /proc file system - * - */ -void irda_proc_unregister(void) -{ - int i; - - if (proc_irda) { - for (i=0; i<ARRAY_SIZE(irda_dirs); i++) - remove_proc_entry(irda_dirs[i].name, proc_irda); - - remove_proc_entry("irda", init_net.proc_net); - proc_irda = NULL; - } -} - - diff --git a/net/irda/irqueue.c b/net/irda/irqueue.c deleted file mode 100644 index 160dc89335e2..000000000000 --- a/net/irda/irqueue.c +++ /dev/null @@ -1,911 +0,0 @@ -/********************************************************************* - * - * Filename: irqueue.c - * Version: 0.3 - * Description: General queue implementation - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Tue Jun 9 13:29:31 1998 - * Modified at: Sun Dec 12 13:48:22 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Modified at: Thu Jan 4 14:29:10 CET 2001 - * Modified by: Marc Zyngier <mzyngier@freesurf.fr> - * - * Copyright (C) 1998-1999, Aage Kvalnes <aage@cs.uit.no> - * Copyright (C) 1998, Dag Brattli, - * All Rights Reserved. - * - * This code is taken from the Vortex Operating System written by Aage - * Kvalnes. Aage has agreed that this code can use the GPL licence, - * although he does not use that licence in his own code. - * - * This copyright does however _not_ include the ELF hash() function - * which I currently don't know which licence or copyright it - * has. Please inform me if you know. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -/* - * NOTE : - * There are various problems with this package : - * o the hash function for ints is pathetic (but could be changed) - * o locking is sometime suspicious (especially during enumeration) - * o most users have only a few elements (== overhead) - * o most users never use search, so don't benefit from hashing - * Problem already fixed : - * o not 64 bit compliant (most users do hashv = (int) self) - * o hashbin_remove() is broken => use hashbin_remove_this() - * I think most users would be better served by a simple linked list - * (like include/linux/list.h) with a global spinlock per list. - * Jean II - */ - -/* - * Notes on the concurrent access to hashbin and other SMP issues - * ------------------------------------------------------------- - * Hashbins are very often in the IrDA stack a global repository of - * information, and therefore used in a very asynchronous manner following - * various events (driver calls, timers, user calls...). - * Therefore, very often it is highly important to consider the - * management of concurrent access to the hashbin and how to guarantee the - * consistency of the operations on it. - * - * First, we need to define the objective of locking : - * 1) Protect user data (content pointed by the hashbin) - * 2) Protect hashbin structure itself (linked list in each bin) - * - * OLD LOCKING - * ----------- - * - * The previous locking strategy, either HB_LOCAL or HB_GLOBAL were - * both inadequate in *both* aspect. - * o HB_GLOBAL was using a spinlock for each bin (local locking). - * o HB_LOCAL was disabling irq on *all* CPUs, so use a single - * global semaphore. - * The problems were : - * A) Global irq disabling is no longer supported by the kernel - * B) No protection for the hashbin struct global data - * o hashbin_delete() - * o hb_current - * C) No protection for user data in some cases - * - * A) HB_LOCAL use global irq disabling, so doesn't work on kernel - * 2.5.X. Even when it is supported (kernel 2.4.X and earlier), its - * performance is not satisfactory on SMP setups. Most hashbins were - * HB_LOCAL, so (A) definitely need fixing. - * B) HB_LOCAL could be modified to fix (B). However, because HB_GLOBAL - * lock only the individual bins, it will never be able to lock the - * global data, so can't do (B). - * C) Some functions return pointer to data that is still in the - * hashbin : - * o hashbin_find() - * o hashbin_get_first() - * o hashbin_get_next() - * As the data is still in the hashbin, it may be changed or free'd - * while the caller is examinimg the data. In those case, locking can't - * be done within the hashbin, but must include use of the data within - * the caller. - * The caller can easily do this with HB_LOCAL (just disable irqs). - * However, this is impossible with HB_GLOBAL because the caller has no - * way to know the proper bin, so don't know which spinlock to use. - * - * Quick summary : can no longer use HB_LOCAL, and HB_GLOBAL is - * fundamentally broken and will never work. - * - * NEW LOCKING - * ----------- - * - * To fix those problems, I've introduce a few changes in the - * hashbin locking : - * 1) New HB_LOCK scheme - * 2) hashbin->hb_spinlock - * 3) New hashbin usage policy - * - * HB_LOCK : - * ------- - * HB_LOCK is a locking scheme intermediate between the old HB_LOCAL - * and HB_GLOBAL. It uses a single spinlock to protect the whole content - * of the hashbin. As it is a single spinlock, it can protect the global - * data of the hashbin and not only the bins themselves. - * HB_LOCK can only protect some of the hashbin calls, so it only lock - * call that can be made 100% safe and leave other call unprotected. - * HB_LOCK in theory is slower than HB_GLOBAL, but as the hashbin - * content is always small contention is not high, so it doesn't matter - * much. HB_LOCK is probably faster than HB_LOCAL. - * - * hashbin->hb_spinlock : - * -------------------- - * The spinlock that HB_LOCK uses is available for caller, so that - * the caller can protect unprotected calls (see below). - * If the caller want to do entirely its own locking (HB_NOLOCK), he - * can do so and may use safely this spinlock. - * Locking is done like this : - * spin_lock_irqsave(&hashbin->hb_spinlock, flags); - * Releasing the lock : - * spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - * - * Safe & Protected calls : - * ---------------------- - * The following calls are safe or protected via HB_LOCK : - * o hashbin_new() -> safe - * o hashbin_delete() - * o hashbin_insert() - * o hashbin_remove_first() - * o hashbin_remove() - * o hashbin_remove_this() - * o HASHBIN_GET_SIZE() -> atomic - * - * The following calls only protect the hashbin itself : - * o hashbin_lock_find() - * o hashbin_find_next() - * - * Unprotected calls : - * ----------------- - * The following calls need to be protected by the caller : - * o hashbin_find() - * o hashbin_get_first() - * o hashbin_get_next() - * - * Locking Policy : - * -------------- - * If the hashbin is used only in a single thread of execution - * (explicitly or implicitely), you can use HB_NOLOCK - * If the calling module already provide concurrent access protection, - * you may use HB_NOLOCK. - * - * In all other cases, you need to use HB_LOCK and lock the hashbin - * every time before calling one of the unprotected calls. You also must - * use the pointer returned by the unprotected call within the locked - * region. - * - * Extra care for enumeration : - * -------------------------- - * hashbin_get_first() and hashbin_get_next() use the hashbin to - * store the current position, in hb_current. - * As long as the hashbin remains locked, this is safe. If you unlock - * the hashbin, the current position may change if anybody else modify - * or enumerate the hashbin. - * Summary : do the full enumeration while locked. - * - * Alternatively, you may use hashbin_find_next(). But, this will - * be slower, is more complex to use and doesn't protect the hashbin - * content. So, care is needed here as well. - * - * Other issues : - * ------------ - * I believe that we are overdoing it by using spin_lock_irqsave() - * and we should use only spin_lock_bh() or similar. But, I don't have - * the balls to try it out. - * Don't believe that because hashbin are now (somewhat) SMP safe - * that the rest of the code is. Higher layers tend to be safest, - * but LAP and LMP would need some serious dedicated love. - * - * Jean II - */ -#include <linux/module.h> -#include <linux/slab.h> - -#include <net/irda/irda.h> -#include <net/irda/irqueue.h> - -/************************ QUEUE SUBROUTINES ************************/ - -/* - * Hashbin - */ -#define GET_HASHBIN(x) ( x & HASHBIN_MASK ) - -/* - * Function hash (name) - * - * This function hash the input string 'name' using the ELF hash - * function for strings. - */ -static __u32 hash( const char* name) -{ - __u32 h = 0; - __u32 g; - - while(*name) { - h = (h<<4) + *name++; - if ((g = (h & 0xf0000000))) - h ^=g>>24; - h &=~g; - } - return h; -} - -/* - * Function enqueue_first (queue, proc) - * - * Insert item first in queue. - * - */ -static void enqueue_first(irda_queue_t **queue, irda_queue_t* element) -{ - - /* - * Check if queue is empty. - */ - if ( *queue == NULL ) { - /* - * Queue is empty. Insert one element into the queue. - */ - element->q_next = element->q_prev = *queue = element; - - } else { - /* - * Queue is not empty. Insert element into front of queue. - */ - element->q_next = (*queue); - (*queue)->q_prev->q_next = element; - element->q_prev = (*queue)->q_prev; - (*queue)->q_prev = element; - (*queue) = element; - } -} - - -/* - * Function dequeue (queue) - * - * Remove first entry in queue - * - */ -static irda_queue_t *dequeue_first(irda_queue_t **queue) -{ - irda_queue_t *ret; - - pr_debug("dequeue_first()\n"); - - /* - * Set return value - */ - ret = *queue; - - if ( *queue == NULL ) { - /* - * Queue was empty. - */ - } else if ( (*queue)->q_next == *queue ) { - /* - * Queue only contained a single element. It will now be - * empty. - */ - *queue = NULL; - } else { - /* - * Queue contained several element. Remove the first one. - */ - (*queue)->q_prev->q_next = (*queue)->q_next; - (*queue)->q_next->q_prev = (*queue)->q_prev; - *queue = (*queue)->q_next; - } - - /* - * Return the removed entry (or NULL of queue was empty). - */ - return ret; -} - -/* - * Function dequeue_general (queue, element) - * - * - */ -static irda_queue_t *dequeue_general(irda_queue_t **queue, irda_queue_t* element) -{ - irda_queue_t *ret; - - pr_debug("dequeue_general()\n"); - - /* - * Set return value - */ - ret = *queue; - - if ( *queue == NULL ) { - /* - * Queue was empty. - */ - } else if ( (*queue)->q_next == *queue ) { - /* - * Queue only contained a single element. It will now be - * empty. - */ - *queue = NULL; - - } else { - /* - * Remove specific element. - */ - element->q_prev->q_next = element->q_next; - element->q_next->q_prev = element->q_prev; - if ( (*queue) == element) - (*queue) = element->q_next; - } - - /* - * Return the removed entry (or NULL of queue was empty). - */ - return ret; -} - -/************************ HASHBIN MANAGEMENT ************************/ - -/* - * Function hashbin_create ( type, name ) - * - * Create hashbin! - * - */ -hashbin_t *hashbin_new(int type) -{ - hashbin_t* hashbin; - - /* - * Allocate new hashbin - */ - hashbin = kzalloc(sizeof(*hashbin), GFP_ATOMIC); - if (!hashbin) - return NULL; - - /* - * Initialize structure - */ - hashbin->hb_type = type; - hashbin->magic = HB_MAGIC; - //hashbin->hb_current = NULL; - - /* Make sure all spinlock's are unlocked */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_lock_init(&hashbin->hb_spinlock); - } - - return hashbin; -} -EXPORT_SYMBOL(hashbin_new); - - -/* - * Function hashbin_delete (hashbin, free_func) - * - * Destroy hashbin, the free_func can be a user supplied special routine - * for deallocating this structure if it's complex. If not the user can - * just supply kfree, which should take care of the job. - */ -int hashbin_delete( hashbin_t* hashbin, FREE_FUNC free_func) -{ - irda_queue_t* queue; - unsigned long flags = 0; - int i; - - IRDA_ASSERT(hashbin != NULL, return -1;); - IRDA_ASSERT(hashbin->magic == HB_MAGIC, return -1;); - - /* Synchronize */ - if (hashbin->hb_type & HB_LOCK) - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - - /* - * Free the entries in the hashbin, TODO: use hashbin_clear when - * it has been shown to work - */ - for (i = 0; i < HASHBIN_SIZE; i ++ ) { - while (1) { - queue = dequeue_first((irda_queue_t**) &hashbin->hb_queue[i]); - - if (!queue) - break; - - if (free_func) { - if (hashbin->hb_type & HB_LOCK) - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - free_func(queue); - if (hashbin->hb_type & HB_LOCK) - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - } - } - } - - /* Cleanup local data */ - hashbin->hb_current = NULL; - hashbin->magic = ~HB_MAGIC; - - /* Release lock */ - if (hashbin->hb_type & HB_LOCK) - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - - /* - * Free the hashbin structure - */ - kfree(hashbin); - - return 0; -} -EXPORT_SYMBOL(hashbin_delete); - -/********************* HASHBIN LIST OPERATIONS *********************/ - -/* - * Function hashbin_insert (hashbin, entry, name) - * - * Insert an entry into the hashbin - * - */ -void hashbin_insert(hashbin_t* hashbin, irda_queue_t* entry, long hashv, - const char* name) -{ - unsigned long flags = 0; - int bin; - - IRDA_ASSERT( hashbin != NULL, return;); - IRDA_ASSERT( hashbin->magic == HB_MAGIC, return;); - - /* - * Locate hashbin - */ - if ( name ) - hashv = hash( name ); - bin = GET_HASHBIN( hashv ); - - /* Synchronize */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - /* - * Store name and key - */ - entry->q_hash = hashv; - if ( name ) - strlcpy( entry->q_name, name, sizeof(entry->q_name)); - - /* - * Insert new entry first - */ - enqueue_first( (irda_queue_t**) &hashbin->hb_queue[ bin ], - entry); - hashbin->hb_size++; - - /* Release lock */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ -} -EXPORT_SYMBOL(hashbin_insert); - -/* - * Function hashbin_remove_first (hashbin) - * - * Remove first entry of the hashbin - * - * Note : this function no longer use hashbin_remove(), but does things - * similar to hashbin_remove_this(), so can be considered safe. - * Jean II - */ -void *hashbin_remove_first( hashbin_t *hashbin) -{ - unsigned long flags = 0; - irda_queue_t *entry = NULL; - - /* Synchronize */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - entry = hashbin_get_first( hashbin); - if ( entry != NULL) { - int bin; - long hashv; - /* - * Locate hashbin - */ - hashv = entry->q_hash; - bin = GET_HASHBIN( hashv ); - - /* - * Dequeue the entry... - */ - dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ], - entry); - hashbin->hb_size--; - entry->q_next = NULL; - entry->q_prev = NULL; - - /* - * Check if this item is the currently selected item, and in - * that case we must reset hb_current - */ - if ( entry == hashbin->hb_current) - hashbin->hb_current = NULL; - } - - /* Release lock */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - return entry; -} - - -/* - * Function hashbin_remove (hashbin, hashv, name) - * - * Remove entry with the given name - * - * The use of this function is highly discouraged, because the whole - * concept behind hashbin_remove() is broken. In many cases, it's not - * possible to guarantee the unicity of the index (either hashv or name), - * leading to removing the WRONG entry. - * The only simple safe use is : - * hashbin_remove(hasbin, (int) self, NULL); - * In other case, you must think hard to guarantee unicity of the index. - * Jean II - */ -void* hashbin_remove( hashbin_t* hashbin, long hashv, const char* name) -{ - int bin, found = FALSE; - unsigned long flags = 0; - irda_queue_t* entry; - - IRDA_ASSERT( hashbin != NULL, return NULL;); - IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); - - /* - * Locate hashbin - */ - if ( name ) - hashv = hash( name ); - bin = GET_HASHBIN( hashv ); - - /* Synchronize */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - /* - * Search for entry - */ - entry = hashbin->hb_queue[ bin ]; - if ( entry ) { - do { - /* - * Check for key - */ - if ( entry->q_hash == hashv ) { - /* - * Name compare too? - */ - if ( name ) { - if ( strcmp( entry->q_name, name) == 0) - { - found = TRUE; - break; - } - } else { - found = TRUE; - break; - } - } - entry = entry->q_next; - } while ( entry != hashbin->hb_queue[ bin ] ); - } - - /* - * If entry was found, dequeue it - */ - if ( found ) { - dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ], - entry); - hashbin->hb_size--; - - /* - * Check if this item is the currently selected item, and in - * that case we must reset hb_current - */ - if ( entry == hashbin->hb_current) - hashbin->hb_current = NULL; - } - - /* Release lock */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - - /* Return */ - if ( found ) - return entry; - else - return NULL; - -} -EXPORT_SYMBOL(hashbin_remove); - -/* - * Function hashbin_remove_this (hashbin, entry) - * - * Remove entry with the given name - * - * In some cases, the user of hashbin can't guarantee the unicity - * of either the hashv or name. - * In those cases, using the above function is guaranteed to cause troubles, - * so we use this one instead... - * And by the way, it's also faster, because we skip the search phase ;-) - */ -void* hashbin_remove_this( hashbin_t* hashbin, irda_queue_t* entry) -{ - unsigned long flags = 0; - int bin; - long hashv; - - IRDA_ASSERT( hashbin != NULL, return NULL;); - IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); - IRDA_ASSERT( entry != NULL, return NULL;); - - /* Synchronize */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - /* Check if valid and not already removed... */ - if((entry->q_next == NULL) || (entry->q_prev == NULL)) { - entry = NULL; - goto out; - } - - /* - * Locate hashbin - */ - hashv = entry->q_hash; - bin = GET_HASHBIN( hashv ); - - /* - * Dequeue the entry... - */ - dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ], - entry); - hashbin->hb_size--; - entry->q_next = NULL; - entry->q_prev = NULL; - - /* - * Check if this item is the currently selected item, and in - * that case we must reset hb_current - */ - if ( entry == hashbin->hb_current) - hashbin->hb_current = NULL; -out: - /* Release lock */ - if ( hashbin->hb_type & HB_LOCK ) { - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - } /* Default is no-lock */ - - return entry; -} -EXPORT_SYMBOL(hashbin_remove_this); - -/*********************** HASHBIN ENUMERATION ***********************/ - -/* - * Function hashbin_common_find (hashbin, hashv, name) - * - * Find item with the given hashv or name - * - */ -void* hashbin_find( hashbin_t* hashbin, long hashv, const char* name ) -{ - int bin; - irda_queue_t* entry; - - pr_debug("hashbin_find()\n"); - - IRDA_ASSERT( hashbin != NULL, return NULL;); - IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); - - /* - * Locate hashbin - */ - if ( name ) - hashv = hash( name ); - bin = GET_HASHBIN( hashv ); - - /* - * Search for entry - */ - entry = hashbin->hb_queue[ bin]; - if ( entry ) { - do { - /* - * Check for key - */ - if ( entry->q_hash == hashv ) { - /* - * Name compare too? - */ - if ( name ) { - if ( strcmp( entry->q_name, name ) == 0 ) { - return entry; - } - } else { - return entry; - } - } - entry = entry->q_next; - } while ( entry != hashbin->hb_queue[ bin ] ); - } - - return NULL; -} -EXPORT_SYMBOL(hashbin_find); - -/* - * Function hashbin_lock_find (hashbin, hashv, name) - * - * Find item with the given hashv or name - * - * Same, but with spinlock protection... - * I call it safe, but it's only safe with respect to the hashbin, not its - * content. - Jean II - */ -void* hashbin_lock_find( hashbin_t* hashbin, long hashv, const char* name ) -{ - unsigned long flags = 0; - irda_queue_t* entry; - - /* Synchronize */ - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - - /* - * Search for entry - */ - entry = hashbin_find(hashbin, hashv, name); - - /* Release lock */ - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - - return entry; -} -EXPORT_SYMBOL(hashbin_lock_find); - -/* - * Function hashbin_find (hashbin, hashv, name, pnext) - * - * Find an item with the given hashv or name, and its successor - * - * This function allow to do concurrent enumerations without the - * need to lock over the whole session, because the caller keep the - * context of the search. On the other hand, it might fail and return - * NULL if the entry is removed. - Jean II - */ -void* hashbin_find_next( hashbin_t* hashbin, long hashv, const char* name, - void ** pnext) -{ - unsigned long flags = 0; - irda_queue_t* entry; - - /* Synchronize */ - spin_lock_irqsave(&hashbin->hb_spinlock, flags); - - /* - * Search for current entry - * This allow to check if the current item is still in the - * hashbin or has been removed. - */ - entry = hashbin_find(hashbin, hashv, name); - - /* - * Trick hashbin_get_next() to return what we want - */ - if(entry) { - hashbin->hb_current = entry; - *pnext = hashbin_get_next( hashbin ); - } else - *pnext = NULL; - - /* Release lock */ - spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); - - return entry; -} - -/* - * Function hashbin_get_first (hashbin) - * - * Get a pointer to first element in hashbin, this function must be - * called before any calls to hashbin_get_next()! - * - */ -irda_queue_t *hashbin_get_first( hashbin_t* hashbin) -{ - irda_queue_t *entry; - int i; - - IRDA_ASSERT( hashbin != NULL, return NULL;); - IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); - - if ( hashbin == NULL) - return NULL; - - for ( i = 0; i < HASHBIN_SIZE; i ++ ) { - entry = hashbin->hb_queue[ i]; - if ( entry) { - hashbin->hb_current = entry; - return entry; - } - } - /* - * Did not find any item in hashbin - */ - return NULL; -} -EXPORT_SYMBOL(hashbin_get_first); - -/* - * Function hashbin_get_next (hashbin) - * - * Get next item in hashbin. A series of hashbin_get_next() calls must - * be started by a call to hashbin_get_first(). The function returns - * NULL when all items have been traversed - * - * The context of the search is stored within the hashbin, so you must - * protect yourself from concurrent enumerations. - Jean II - */ -irda_queue_t *hashbin_get_next( hashbin_t *hashbin) -{ - irda_queue_t* entry; - int bin; - int i; - - IRDA_ASSERT( hashbin != NULL, return NULL;); - IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); - - if ( hashbin->hb_current == NULL) { - IRDA_ASSERT( hashbin->hb_current != NULL, return NULL;); - return NULL; - } - entry = hashbin->hb_current->q_next; - bin = GET_HASHBIN( entry->q_hash); - - /* - * Make sure that we are not back at the beginning of the queue - * again - */ - if ( entry != hashbin->hb_queue[ bin ]) { - hashbin->hb_current = entry; - - return entry; - } - - /* - * Check that this is not the last queue in hashbin - */ - if ( bin >= HASHBIN_SIZE) - return NULL; - - /* - * Move to next queue in hashbin - */ - bin++; - for ( i = bin; i < HASHBIN_SIZE; i++ ) { - entry = hashbin->hb_queue[ i]; - if ( entry) { - hashbin->hb_current = entry; - - return entry; - } - } - return NULL; -} -EXPORT_SYMBOL(hashbin_get_next); diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c deleted file mode 100644 index 873da5e7d428..000000000000 --- a/net/irda/irsysctl.c +++ /dev/null @@ -1,258 +0,0 @@ -/********************************************************************* - * - * Filename: irsysctl.c - * Version: 1.0 - * Description: Sysctl interface for IrDA - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun May 24 22:12:06 1998 - * Modified at: Fri Jun 4 02:50:15 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1997, 1999 Dag Brattli, All Rights Reserved. - * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/mm.h> -#include <linux/ctype.h> -#include <linux/sysctl.h> -#include <linux/init.h> - -#include <net/irda/irda.h> /* irda_debug */ -#include <net/irda/irlmp.h> -#include <net/irda/timer.h> -#include <net/irda/irias_object.h> - -extern int sysctl_discovery; -extern int sysctl_discovery_slots; -extern int sysctl_discovery_timeout; -extern int sysctl_slot_timeout; -extern int sysctl_fast_poll_increase; -extern char sysctl_devname[]; -extern int sysctl_max_baud_rate; -extern unsigned int sysctl_min_tx_turn_time; -extern unsigned int sysctl_max_tx_data_size; -extern unsigned int sysctl_max_tx_window; -extern int sysctl_max_noreply_time; -extern int sysctl_warn_noreply_time; -extern int sysctl_lap_keepalive_time; - -extern struct irlmp_cb *irlmp; - -/* this is needed for the proc_dointvec_minmax - Jean II */ -static int max_discovery_slots = 16; /* ??? */ -static int min_discovery_slots = 1; -/* IrLAP 6.13.2 says 25ms to 10+70ms - allow higher since some devices - * seems to require it. (from Dag's comment) */ -static int max_slot_timeout = 160; -static int min_slot_timeout = 20; -static int max_max_baud_rate = 16000000; /* See qos.c - IrLAP spec */ -static int min_max_baud_rate = 2400; -static int max_min_tx_turn_time = 10000; /* See qos.c - IrLAP spec */ -static int min_min_tx_turn_time; -static int max_max_tx_data_size = 2048; /* See qos.c - IrLAP spec */ -static int min_max_tx_data_size = 64; -static int max_max_tx_window = 7; /* See qos.c - IrLAP spec */ -static int min_max_tx_window = 1; -static int max_max_noreply_time = 40; /* See qos.c - IrLAP spec */ -static int min_max_noreply_time = 3; -static int max_warn_noreply_time = 3; /* 3s == standard */ -static int min_warn_noreply_time = 1; /* 1s == min WD_TIMER */ -static int max_lap_keepalive_time = 10000; /* 10s */ -static int min_lap_keepalive_time = 100; /* 100us */ -/* For other sysctl, I've no idea of the range. Maybe Dag could help - * us on that - Jean II */ - -static int do_devname(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, loff_t *ppos) -{ - int ret; - - ret = proc_dostring(table, write, buffer, lenp, ppos); - if (ret == 0 && write) { - struct ias_value *val; - - val = irias_new_string_value(sysctl_devname); - if (val) - irias_object_change_attribute("Device", "DeviceName", val); - } - return ret; -} - - -static int do_discovery(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, loff_t *ppos) -{ - int ret; - - ret = proc_dointvec(table, write, buffer, lenp, ppos); - if (ret) - return ret; - - if (irlmp == NULL) - return -ENODEV; - - if (sysctl_discovery) - irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout*HZ); - else - del_timer_sync(&irlmp->discovery_timer); - - return ret; -} - -/* One file */ -static struct ctl_table irda_table[] = { - { - .procname = "discovery", - .data = &sysctl_discovery, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = do_discovery, - }, - { - .procname = "devname", - .data = sysctl_devname, - .maxlen = 65, - .mode = 0644, - .proc_handler = do_devname, - }, -#ifdef CONFIG_IRDA_FAST_RR - { - .procname = "fast_poll_increase", - .data = &sysctl_fast_poll_increase, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec - }, -#endif - { - .procname = "discovery_slots", - .data = &sysctl_discovery_slots, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_discovery_slots, - .extra2 = &max_discovery_slots - }, - { - .procname = "discovery_timeout", - .data = &sysctl_discovery_timeout, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec - }, - { - .procname = "slot_timeout", - .data = &sysctl_slot_timeout, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_slot_timeout, - .extra2 = &max_slot_timeout - }, - { - .procname = "max_baud_rate", - .data = &sysctl_max_baud_rate, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_max_baud_rate, - .extra2 = &max_max_baud_rate - }, - { - .procname = "min_tx_turn_time", - .data = &sysctl_min_tx_turn_time, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_min_tx_turn_time, - .extra2 = &max_min_tx_turn_time - }, - { - .procname = "max_tx_data_size", - .data = &sysctl_max_tx_data_size, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_max_tx_data_size, - .extra2 = &max_max_tx_data_size - }, - { - .procname = "max_tx_window", - .data = &sysctl_max_tx_window, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_max_tx_window, - .extra2 = &max_max_tx_window - }, - { - .procname = "max_noreply_time", - .data = &sysctl_max_noreply_time, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_max_noreply_time, - .extra2 = &max_max_noreply_time - }, - { - .procname = "warn_noreply_time", - .data = &sysctl_warn_noreply_time, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_warn_noreply_time, - .extra2 = &max_warn_noreply_time - }, - { - .procname = "lap_keepalive_time", - .data = &sysctl_lap_keepalive_time, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_lap_keepalive_time, - .extra2 = &max_lap_keepalive_time - }, - { } -}; - -static struct ctl_table_header *irda_table_header; - -/* - * Function irda_sysctl_register (void) - * - * Register our sysctl interface - * - */ -int __init irda_sysctl_register(void) -{ - irda_table_header = register_net_sysctl(&init_net, "net/irda", irda_table); - if (!irda_table_header) - return -ENOMEM; - - return 0; -} - -/* - * Function irda_sysctl_unregister (void) - * - * Unregister our sysctl interface - * - */ -void irda_sysctl_unregister(void) -{ - unregister_net_sysctl_table(irda_table_header); -} - - - diff --git a/net/irda/irttp.c b/net/irda/irttp.c deleted file mode 100644 index b6ab41d5b3a3..000000000000 --- a/net/irda/irttp.c +++ /dev/null @@ -1,1891 +0,0 @@ -/********************************************************************* - * - * Filename: irttp.c - * Version: 1.2 - * Description: Tiny Transport Protocol (TTP) implementation - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sun Aug 31 20:14:31 1997 - * Modified at: Wed Jan 5 11:31:27 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/skbuff.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include <asm/byteorder.h> -#include <asm/unaligned.h> - -#include <net/irda/irda.h> -#include <net/irda/irlap.h> -#include <net/irda/irlmp.h> -#include <net/irda/parameters.h> -#include <net/irda/irttp.h> - -static struct irttp_cb *irttp; - -static void __irttp_close_tsap(struct tsap_cb *self); - -static int irttp_data_indication(void *instance, void *sap, - struct sk_buff *skb); -static int irttp_udata_indication(void *instance, void *sap, - struct sk_buff *skb); -static void irttp_disconnect_indication(void *instance, void *sap, - LM_REASON reason, struct sk_buff *); -static void irttp_connect_indication(void *instance, void *sap, - struct qos_info *qos, __u32 max_sdu_size, - __u8 header_size, struct sk_buff *skb); -static void irttp_connect_confirm(void *instance, void *sap, - struct qos_info *qos, __u32 max_sdu_size, - __u8 header_size, struct sk_buff *skb); -static void irttp_run_tx_queue(struct tsap_cb *self); -static void irttp_run_rx_queue(struct tsap_cb *self); - -static void irttp_flush_queues(struct tsap_cb *self); -static void irttp_fragment_skb(struct tsap_cb *self, struct sk_buff *skb); -static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self); -static void irttp_todo_expired(unsigned long data); -static int irttp_param_max_sdu_size(void *instance, irda_param_t *param, - int get); - -static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow); -static void irttp_status_indication(void *instance, - LINK_STATUS link, LOCK_STATUS lock); - -/* Information for parsing parameters in IrTTP */ -static const pi_minor_info_t pi_minor_call_table[] = { - { NULL, 0 }, /* 0x00 */ - { irttp_param_max_sdu_size, PV_INTEGER | PV_BIG_ENDIAN } /* 0x01 */ -}; -static const pi_major_info_t pi_major_call_table[] = { - { pi_minor_call_table, 2 } -}; -static pi_param_info_t param_info = { pi_major_call_table, 1, 0x0f, 4 }; - -/************************ GLOBAL PROCEDURES ************************/ - -/* - * Function irttp_init (void) - * - * Initialize the IrTTP layer. Called by module initialization code - * - */ -int __init irttp_init(void) -{ - irttp = kzalloc(sizeof(struct irttp_cb), GFP_KERNEL); - if (irttp == NULL) - return -ENOMEM; - - irttp->magic = TTP_MAGIC; - - irttp->tsaps = hashbin_new(HB_LOCK); - if (!irttp->tsaps) { - net_err_ratelimited("%s: can't allocate IrTTP hashbin!\n", - __func__); - kfree(irttp); - return -ENOMEM; - } - - return 0; -} - -/* - * Function irttp_cleanup (void) - * - * Called by module destruction/cleanup code - * - */ -void irttp_cleanup(void) -{ - /* Check for main structure */ - IRDA_ASSERT(irttp->magic == TTP_MAGIC, return;); - - /* - * Delete hashbin and close all TSAP instances in it - */ - hashbin_delete(irttp->tsaps, (FREE_FUNC) __irttp_close_tsap); - - irttp->magic = 0; - - /* De-allocate main structure */ - kfree(irttp); - - irttp = NULL; -} - -/*************************** SUBROUTINES ***************************/ - -/* - * Function irttp_start_todo_timer (self, timeout) - * - * Start todo timer. - * - * Made it more effient and unsensitive to race conditions - Jean II - */ -static inline void irttp_start_todo_timer(struct tsap_cb *self, int timeout) -{ - /* Set new value for timer */ - mod_timer(&self->todo_timer, jiffies + timeout); -} - -/* - * Function irttp_todo_expired (data) - * - * Todo timer has expired! - * - * One of the restriction of the timer is that it is run only on the timer - * interrupt which run every 10ms. This mean that even if you set the timer - * with a delay of 0, it may take up to 10ms before it's run. - * So, to minimise latency and keep cache fresh, we try to avoid using - * it as much as possible. - * Note : we can't use tasklets, because they can't be asynchronously - * killed (need user context), and we can't guarantee that here... - * Jean II - */ -static void irttp_todo_expired(unsigned long data) -{ - struct tsap_cb *self = (struct tsap_cb *) data; - - /* Check that we still exist */ - if (!self || self->magic != TTP_TSAP_MAGIC) - return; - - pr_debug("%s(instance=%p)\n", __func__, self); - - /* Try to make some progress, especially on Tx side - Jean II */ - irttp_run_rx_queue(self); - irttp_run_tx_queue(self); - - /* Check if time for disconnect */ - if (test_bit(0, &self->disconnect_pend)) { - /* Check if it's possible to disconnect yet */ - if (skb_queue_empty(&self->tx_queue)) { - /* Make sure disconnect is not pending anymore */ - clear_bit(0, &self->disconnect_pend); /* FALSE */ - - /* Note : self->disconnect_skb may be NULL */ - irttp_disconnect_request(self, self->disconnect_skb, - P_NORMAL); - self->disconnect_skb = NULL; - } else { - /* Try again later */ - irttp_start_todo_timer(self, HZ/10); - - /* No reason to try and close now */ - return; - } - } - - /* Check if it's closing time */ - if (self->close_pend) - /* Finish cleanup */ - irttp_close_tsap(self); -} - -/* - * Function irttp_flush_queues (self) - * - * Flushes (removes all frames) in transitt-buffer (tx_list) - */ -static void irttp_flush_queues(struct tsap_cb *self) -{ - struct sk_buff *skb; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - /* Deallocate frames waiting to be sent */ - while ((skb = skb_dequeue(&self->tx_queue)) != NULL) - dev_kfree_skb(skb); - - /* Deallocate received frames */ - while ((skb = skb_dequeue(&self->rx_queue)) != NULL) - dev_kfree_skb(skb); - - /* Deallocate received fragments */ - while ((skb = skb_dequeue(&self->rx_fragments)) != NULL) - dev_kfree_skb(skb); -} - -/* - * Function irttp_reassemble (self) - * - * Makes a new (continuous) skb of all the fragments in the fragment - * queue - * - */ -static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self) -{ - struct sk_buff *skb, *frag; - int n = 0; /* Fragment index */ - - IRDA_ASSERT(self != NULL, return NULL;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return NULL;); - - pr_debug("%s(), self->rx_sdu_size=%d\n", __func__, - self->rx_sdu_size); - - skb = dev_alloc_skb(TTP_HEADER + self->rx_sdu_size); - if (!skb) - return NULL; - - /* - * Need to reserve space for TTP header in case this skb needs to - * be requeued in case delivery failes - */ - skb_reserve(skb, TTP_HEADER); - skb_put(skb, self->rx_sdu_size); - - /* - * Copy all fragments to a new buffer - */ - while ((frag = skb_dequeue(&self->rx_fragments)) != NULL) { - skb_copy_to_linear_data_offset(skb, n, frag->data, frag->len); - n += frag->len; - - dev_kfree_skb(frag); - } - - pr_debug("%s(), frame len=%d, rx_sdu_size=%d, rx_max_sdu_size=%d\n", - __func__, n, self->rx_sdu_size, self->rx_max_sdu_size); - /* Note : irttp_run_rx_queue() calculate self->rx_sdu_size - * by summing the size of all fragments, so we should always - * have n == self->rx_sdu_size, except in cases where we - * droped the last fragment (when self->rx_sdu_size exceed - * self->rx_max_sdu_size), where n < self->rx_sdu_size. - * Jean II */ - IRDA_ASSERT(n <= self->rx_sdu_size, n = self->rx_sdu_size;); - - /* Set the new length */ - skb_trim(skb, n); - - self->rx_sdu_size = 0; - - return skb; -} - -/* - * Function irttp_fragment_skb (skb) - * - * Fragments a frame and queues all the fragments for transmission - * - */ -static inline void irttp_fragment_skb(struct tsap_cb *self, - struct sk_buff *skb) -{ - struct sk_buff *frag; - __u8 *frame; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - /* - * Split frame into a number of segments - */ - while (skb->len > self->max_seg_size) { - pr_debug("%s(), fragmenting ...\n", __func__); - - /* Make new segment */ - frag = alloc_skb(self->max_seg_size+self->max_header_size, - GFP_ATOMIC); - if (!frag) - return; - - skb_reserve(frag, self->max_header_size); - - /* Copy data from the original skb into this fragment. */ - skb_copy_from_linear_data(skb, skb_put(frag, self->max_seg_size), - self->max_seg_size); - - /* Insert TTP header, with the more bit set */ - frame = skb_push(frag, TTP_HEADER); - frame[0] = TTP_MORE; - - /* Hide the copied data from the original skb */ - skb_pull(skb, self->max_seg_size); - - /* Queue fragment */ - skb_queue_tail(&self->tx_queue, frag); - } - /* Queue what is left of the original skb */ - pr_debug("%s(), queuing last segment\n", __func__); - - frame = skb_push(skb, TTP_HEADER); - frame[0] = 0x00; /* Clear more bit */ - - /* Queue fragment */ - skb_queue_tail(&self->tx_queue, skb); -} - -/* - * Function irttp_param_max_sdu_size (self, param) - * - * Handle the MaxSduSize parameter in the connect frames, this function - * will be called both when this parameter needs to be inserted into, and - * extracted from the connect frames - */ -static int irttp_param_max_sdu_size(void *instance, irda_param_t *param, - int get) -{ - struct tsap_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->tx_max_sdu_size; - else - self->tx_max_sdu_size = param->pv.i; - - pr_debug("%s(), MaxSduSize=%d\n", __func__, param->pv.i); - - return 0; -} - -/*************************** CLIENT CALLS ***************************/ -/************************** LMP CALLBACKS **************************/ -/* Everything is happily mixed up. Waiting for next clean up - Jean II */ - -/* - * Initialization, that has to be done on new tsap - * instance allocation and on duplication - */ -static void irttp_init_tsap(struct tsap_cb *tsap) -{ - spin_lock_init(&tsap->lock); - init_timer(&tsap->todo_timer); - - skb_queue_head_init(&tsap->rx_queue); - skb_queue_head_init(&tsap->tx_queue); - skb_queue_head_init(&tsap->rx_fragments); -} - -/* - * Function irttp_open_tsap (stsap, notify) - * - * Create TSAP connection endpoint, - */ -struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify) -{ - struct tsap_cb *self; - struct lsap_cb *lsap; - notify_t ttp_notify; - - IRDA_ASSERT(irttp->magic == TTP_MAGIC, return NULL;); - - /* The IrLMP spec (IrLMP 1.1 p10) says that we have the right to - * use only 0x01-0x6F. Of course, we can use LSAP_ANY as well. - * JeanII */ - if ((stsap_sel != LSAP_ANY) && - ((stsap_sel < 0x01) || (stsap_sel >= 0x70))) { - pr_debug("%s(), invalid tsap!\n", __func__); - return NULL; - } - - self = kzalloc(sizeof(struct tsap_cb), GFP_ATOMIC); - if (self == NULL) - return NULL; - - /* Initialize internal objects */ - irttp_init_tsap(self); - - /* Initialise todo timer */ - self->todo_timer.data = (unsigned long) self; - self->todo_timer.function = &irttp_todo_expired; - - /* Initialize callbacks for IrLMP to use */ - irda_notify_init(&ttp_notify); - ttp_notify.connect_confirm = irttp_connect_confirm; - ttp_notify.connect_indication = irttp_connect_indication; - ttp_notify.disconnect_indication = irttp_disconnect_indication; - ttp_notify.data_indication = irttp_data_indication; - ttp_notify.udata_indication = irttp_udata_indication; - ttp_notify.flow_indication = irttp_flow_indication; - if (notify->status_indication != NULL) - ttp_notify.status_indication = irttp_status_indication; - ttp_notify.instance = self; - strncpy(ttp_notify.name, notify->name, NOTIFY_MAX_NAME); - - self->magic = TTP_TSAP_MAGIC; - self->connected = FALSE; - - /* - * Create LSAP at IrLMP layer - */ - lsap = irlmp_open_lsap(stsap_sel, &ttp_notify, 0); - if (lsap == NULL) { - pr_debug("%s: unable to allocate LSAP!!\n", __func__); - __irttp_close_tsap(self); - return NULL; - } - - /* - * If user specified LSAP_ANY as source TSAP selector, then IrLMP - * will replace it with whatever source selector which is free, so - * the stsap_sel we have might not be valid anymore - */ - self->stsap_sel = lsap->slsap_sel; - pr_debug("%s(), stsap_sel=%02x\n", __func__, self->stsap_sel); - - self->notify = *notify; - self->lsap = lsap; - - hashbin_insert(irttp->tsaps, (irda_queue_t *) self, (long) self, NULL); - - if (credit > TTP_RX_MAX_CREDIT) - self->initial_credit = TTP_RX_MAX_CREDIT; - else - self->initial_credit = credit; - - return self; -} -EXPORT_SYMBOL(irttp_open_tsap); - -/* - * Function irttp_close (handle) - * - * Remove an instance of a TSAP. This function should only deal with the - * deallocation of the TSAP, and resetting of the TSAPs values; - * - */ -static void __irttp_close_tsap(struct tsap_cb *self) -{ - /* First make sure we're connected. */ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - irttp_flush_queues(self); - - del_timer(&self->todo_timer); - - /* This one won't be cleaned up if we are disconnect_pend + close_pend - * and we receive a disconnect_indication */ - if (self->disconnect_skb) - dev_kfree_skb(self->disconnect_skb); - - self->connected = FALSE; - self->magic = ~TTP_TSAP_MAGIC; - - kfree(self); -} - -/* - * Function irttp_close (self) - * - * Remove TSAP from list of all TSAPs and then deallocate all resources - * associated with this TSAP - * - * Note : because we *free* the tsap structure, it is the responsibility - * of the caller to make sure we are called only once and to deal with - * possible race conditions. - Jean II - */ -int irttp_close_tsap(struct tsap_cb *self) -{ - struct tsap_cb *tsap; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - - /* Make sure tsap has been disconnected */ - if (self->connected) { - /* Check if disconnect is not pending */ - if (!test_bit(0, &self->disconnect_pend)) { - net_warn_ratelimited("%s: TSAP still connected!\n", - __func__); - irttp_disconnect_request(self, NULL, P_NORMAL); - } - self->close_pend = TRUE; - irttp_start_todo_timer(self, HZ/10); - - return 0; /* Will be back! */ - } - - tsap = hashbin_remove(irttp->tsaps, (long) self, NULL); - - IRDA_ASSERT(tsap == self, return -1;); - - /* Close corresponding LSAP */ - if (self->lsap) { - irlmp_close_lsap(self->lsap); - self->lsap = NULL; - } - - __irttp_close_tsap(self); - - return 0; -} -EXPORT_SYMBOL(irttp_close_tsap); - -/* - * Function irttp_udata_request (self, skb) - * - * Send unreliable data on this TSAP - * - */ -int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - /* Take shortcut on zero byte packets */ - if (skb->len == 0) { - ret = 0; - goto err; - } - - /* Check that nothing bad happens */ - if (!self->connected) { - net_warn_ratelimited("%s(), Not connected\n", __func__); - ret = -ENOTCONN; - goto err; - } - - if (skb->len > self->max_seg_size) { - net_err_ratelimited("%s(), UData is too large for IrLAP!\n", - __func__); - ret = -EMSGSIZE; - goto err; - } - - irlmp_udata_request(self->lsap, skb); - self->stats.tx_packets++; - - return 0; - -err: - dev_kfree_skb(skb); - return ret; -} -EXPORT_SYMBOL(irttp_udata_request); - - -/* - * Function irttp_data_request (handle, skb) - * - * Queue frame for transmission. If SAR is enabled, fragement the frame - * and queue the fragments for transmission - */ -int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb) -{ - __u8 *frame; - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - pr_debug("%s() : queue len = %d\n", __func__, - skb_queue_len(&self->tx_queue)); - - /* Take shortcut on zero byte packets */ - if (skb->len == 0) { - ret = 0; - goto err; - } - - /* Check that nothing bad happens */ - if (!self->connected) { - net_warn_ratelimited("%s: Not connected\n", __func__); - ret = -ENOTCONN; - goto err; - } - - /* - * Check if SAR is disabled, and the frame is larger than what fits - * inside an IrLAP frame - */ - if ((self->tx_max_sdu_size == 0) && (skb->len > self->max_seg_size)) { - net_err_ratelimited("%s: SAR disabled, and data is too large for IrLAP!\n", - __func__); - ret = -EMSGSIZE; - goto err; - } - - /* - * Check if SAR is enabled, and the frame is larger than the - * TxMaxSduSize - */ - if ((self->tx_max_sdu_size != 0) && - (self->tx_max_sdu_size != TTP_SAR_UNBOUND) && - (skb->len > self->tx_max_sdu_size)) { - net_err_ratelimited("%s: SAR enabled, but data is larger than TxMaxSduSize!\n", - __func__); - ret = -EMSGSIZE; - goto err; - } - /* - * Check if transmit queue is full - */ - if (skb_queue_len(&self->tx_queue) >= TTP_TX_MAX_QUEUE) { - /* - * Give it a chance to empty itself - */ - irttp_run_tx_queue(self); - - /* Drop packet. This error code should trigger the caller - * to resend the data in the client code - Jean II */ - ret = -ENOBUFS; - goto err; - } - - /* Queue frame, or queue frame segments */ - if ((self->tx_max_sdu_size == 0) || (skb->len < self->max_seg_size)) { - /* Queue frame */ - IRDA_ASSERT(skb_headroom(skb) >= TTP_HEADER, return -1;); - frame = skb_push(skb, TTP_HEADER); - frame[0] = 0x00; /* Clear more bit */ - - skb_queue_tail(&self->tx_queue, skb); - } else { - /* - * Fragment the frame, this function will also queue the - * fragments, we don't care about the fact the transmit - * queue may be overfilled by all the segments for a little - * while - */ - irttp_fragment_skb(self, skb); - } - - /* Check if we can accept more data from client */ - if ((!self->tx_sdu_busy) && - (skb_queue_len(&self->tx_queue) > TTP_TX_HIGH_THRESHOLD)) { - /* Tx queue filling up, so stop client. */ - if (self->notify.flow_indication) { - self->notify.flow_indication(self->notify.instance, - self, FLOW_STOP); - } - /* self->tx_sdu_busy is the state of the client. - * Update state after notifying client to avoid - * race condition with irttp_flow_indication(). - * If the queue empty itself after our test but before - * we set the flag, we will fix ourselves below in - * irttp_run_tx_queue(). - * Jean II */ - self->tx_sdu_busy = TRUE; - } - - /* Try to make some progress */ - irttp_run_tx_queue(self); - - return 0; - -err: - dev_kfree_skb(skb); - return ret; -} -EXPORT_SYMBOL(irttp_data_request); - -/* - * Function irttp_run_tx_queue (self) - * - * Transmit packets queued for transmission (if possible) - * - */ -static void irttp_run_tx_queue(struct tsap_cb *self) -{ - struct sk_buff *skb; - unsigned long flags; - int n; - - pr_debug("%s() : send_credit = %d, queue_len = %d\n", - __func__, - self->send_credit, skb_queue_len(&self->tx_queue)); - - /* Get exclusive access to the tx queue, otherwise don't touch it */ - if (irda_lock(&self->tx_queue_lock) == FALSE) - return; - - /* Try to send out frames as long as we have credits - * and as long as LAP is not full. If LAP is full, it will - * poll us through irttp_flow_indication() - Jean II */ - while ((self->send_credit > 0) && - (!irlmp_lap_tx_queue_full(self->lsap)) && - (skb = skb_dequeue(&self->tx_queue))) { - /* - * Since we can transmit and receive frames concurrently, - * the code below is a critical region and we must assure that - * nobody messes with the credits while we update them. - */ - spin_lock_irqsave(&self->lock, flags); - - n = self->avail_credit; - self->avail_credit = 0; - - /* Only room for 127 credits in frame */ - if (n > 127) { - self->avail_credit = n-127; - n = 127; - } - self->remote_credit += n; - self->send_credit--; - - spin_unlock_irqrestore(&self->lock, flags); - - /* - * More bit must be set by the data_request() or fragment() - * functions - */ - skb->data[0] |= (n & 0x7f); - - /* Detach from socket. - * The current skb has a reference to the socket that sent - * it (skb->sk). When we pass it to IrLMP, the skb will be - * stored in in IrLAP (self->wx_list). When we are within - * IrLAP, we lose the notion of socket, so we should not - * have a reference to a socket. So, we drop it here. - * - * Why does it matter ? - * When the skb is freed (kfree_skb), if it is associated - * with a socket, it release buffer space on the socket - * (through sock_wfree() and sock_def_write_space()). - * If the socket no longer exist, we may crash. Hard. - * When we close a socket, we make sure that associated packets - * in IrTTP are freed. However, we have no way to cancel - * the packet that we have passed to IrLAP. So, if a packet - * remains in IrLAP (retry on the link or else) after we - * close the socket, we are dead ! - * Jean II */ - if (skb->sk != NULL) { - /* IrSOCK application, IrOBEX, ... */ - skb_orphan(skb); - } - /* IrCOMM over IrTTP, IrLAN, ... */ - - /* Pass the skb to IrLMP - done */ - irlmp_data_request(self->lsap, skb); - self->stats.tx_packets++; - } - - /* Check if we can accept more frames from client. - * We don't want to wait until the todo timer to do that, and we - * can't use tasklets (grr...), so we are obliged to give control - * to client. That's ok, this test will be true not too often - * (max once per LAP window) and we are called from places - * where we can spend a bit of time doing stuff. - Jean II */ - if ((self->tx_sdu_busy) && - (skb_queue_len(&self->tx_queue) < TTP_TX_LOW_THRESHOLD) && - (!self->close_pend)) { - if (self->notify.flow_indication) - self->notify.flow_indication(self->notify.instance, - self, FLOW_START); - - /* self->tx_sdu_busy is the state of the client. - * We don't really have a race here, but it's always safer - * to update our state after the client - Jean II */ - self->tx_sdu_busy = FALSE; - } - - /* Reset lock */ - self->tx_queue_lock = 0; -} - -/* - * Function irttp_give_credit (self) - * - * Send a dataless flowdata TTP-PDU and give available credit to peer - * TSAP - */ -static inline void irttp_give_credit(struct tsap_cb *self) -{ - struct sk_buff *tx_skb = NULL; - unsigned long flags; - int n; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - pr_debug("%s() send=%d,avail=%d,remote=%d\n", - __func__, - self->send_credit, self->avail_credit, self->remote_credit); - - /* Give credit to peer */ - tx_skb = alloc_skb(TTP_MAX_HEADER, GFP_ATOMIC); - if (!tx_skb) - return; - - /* Reserve space for LMP, and LAP header */ - skb_reserve(tx_skb, LMP_MAX_HEADER); - - /* - * Since we can transmit and receive frames concurrently, - * the code below is a critical region and we must assure that - * nobody messes with the credits while we update them. - */ - spin_lock_irqsave(&self->lock, flags); - - n = self->avail_credit; - self->avail_credit = 0; - - /* Only space for 127 credits in frame */ - if (n > 127) { - self->avail_credit = n - 127; - n = 127; - } - self->remote_credit += n; - - spin_unlock_irqrestore(&self->lock, flags); - - skb_put(tx_skb, 1); - tx_skb->data[0] = (__u8) (n & 0x7f); - - irlmp_data_request(self->lsap, tx_skb); - self->stats.tx_packets++; -} - -/* - * Function irttp_udata_indication (instance, sap, skb) - * - * Received some unit-data (unreliable) - * - */ -static int irttp_udata_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct tsap_cb *self; - int err; - - self = instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - IRDA_ASSERT(skb != NULL, return -1;); - - self->stats.rx_packets++; - - /* Just pass data to layer above */ - if (self->notify.udata_indication) { - err = self->notify.udata_indication(self->notify.instance, - self, skb); - /* Same comment as in irttp_do_data_indication() */ - if (!err) - return 0; - } - /* Either no handler, or handler returns an error */ - dev_kfree_skb(skb); - - return 0; -} - -/* - * Function irttp_data_indication (instance, sap, skb) - * - * Receive segment from IrLMP. - * - */ -static int irttp_data_indication(void *instance, void *sap, - struct sk_buff *skb) -{ - struct tsap_cb *self; - unsigned long flags; - int n; - - self = instance; - - n = skb->data[0] & 0x7f; /* Extract the credits */ - - self->stats.rx_packets++; - - /* Deal with inbound credit - * Since we can transmit and receive frames concurrently, - * the code below is a critical region and we must assure that - * nobody messes with the credits while we update them. - */ - spin_lock_irqsave(&self->lock, flags); - self->send_credit += n; - if (skb->len > 1) - self->remote_credit--; - spin_unlock_irqrestore(&self->lock, flags); - - /* - * Data or dataless packet? Dataless frames contains only the - * TTP_HEADER. - */ - if (skb->len > 1) { - /* - * We don't remove the TTP header, since we must preserve the - * more bit, so the defragment routing knows what to do - */ - skb_queue_tail(&self->rx_queue, skb); - } else { - /* Dataless flowdata TTP-PDU */ - dev_kfree_skb(skb); - } - - - /* Push data to the higher layer. - * We do it synchronously because running the todo timer for each - * receive packet would be too much overhead and latency. - * By passing control to the higher layer, we run the risk that - * it may take time or grab a lock. Most often, the higher layer - * will only put packet in a queue. - * Anyway, packets are only dripping through the IrDA, so we can - * have time before the next packet. - * Further, we are run from NET_BH, so the worse that can happen is - * us missing the optimal time to send back the PF bit in LAP. - * Jean II */ - irttp_run_rx_queue(self); - - /* We now give credits to peer in irttp_run_rx_queue(). - * We need to send credit *NOW*, otherwise we are going - * to miss the next Tx window. The todo timer may take - * a while before it's run... - Jean II */ - - /* - * If the peer device has given us some credits and we didn't have - * anyone from before, then we need to shedule the tx queue. - * We need to do that because our Tx have stopped (so we may not - * get any LAP flow indication) and the user may be stopped as - * well. - Jean II - */ - if (self->send_credit == n) { - /* Restart pushing stuff to LAP */ - irttp_run_tx_queue(self); - /* Note : we don't want to schedule the todo timer - * because it has horrible latency. No tasklets - * because the tasklet API is broken. - Jean II */ - } - - return 0; -} - -/* - * Function irttp_status_indication (self, reason) - * - * Status_indication, just pass to the higher layer... - * - */ -static void irttp_status_indication(void *instance, - LINK_STATUS link, LOCK_STATUS lock) -{ - struct tsap_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - /* Check if client has already closed the TSAP and gone away */ - if (self->close_pend) - return; - - /* - * Inform service user if he has requested it - */ - if (self->notify.status_indication != NULL) - self->notify.status_indication(self->notify.instance, - link, lock); - else - pr_debug("%s(), no handler\n", __func__); -} - -/* - * Function irttp_flow_indication (self, reason) - * - * Flow_indication : IrLAP tells us to send more data. - * - */ -static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) -{ - struct tsap_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - pr_debug("%s(instance=%p)\n", __func__, self); - - /* We are "polled" directly from LAP, and the LAP want to fill - * its Tx window. We want to do our best to send it data, so that - * we maximise the window. On the other hand, we want to limit the - * amount of work here so that LAP doesn't hang forever waiting - * for packets. - Jean II */ - - /* Try to send some packets. Currently, LAP calls us every time - * there is one free slot, so we will send only one packet. - * This allow the scheduler to do its round robin - Jean II */ - irttp_run_tx_queue(self); - - /* Note regarding the interraction with higher layer. - * irttp_run_tx_queue() may call the client when its queue - * start to empty, via notify.flow_indication(). Initially. - * I wanted this to happen in a tasklet, to avoid client - * grabbing the CPU, but we can't use tasklets safely. And timer - * is definitely too slow. - * This will happen only once per LAP window, and usually at - * the third packet (unless window is smaller). LAP is still - * doing mtt and sending first packet so it's sort of OK - * to do that. Jean II */ - - /* If we need to send disconnect. try to do it now */ - if (self->disconnect_pend) - irttp_start_todo_timer(self, 0); -} - -/* - * Function irttp_flow_request (self, command) - * - * This function could be used by the upper layers to tell IrTTP to stop - * delivering frames if the receive queues are starting to get full, or - * to tell IrTTP to start delivering frames again. - */ -void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow) -{ - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - switch (flow) { - case FLOW_STOP: - pr_debug("%s(), flow stop\n", __func__); - self->rx_sdu_busy = TRUE; - break; - case FLOW_START: - pr_debug("%s(), flow start\n", __func__); - self->rx_sdu_busy = FALSE; - - /* Client say he can accept more data, try to free our - * queues ASAP - Jean II */ - irttp_run_rx_queue(self); - - break; - default: - pr_debug("%s(), Unknown flow command!\n", __func__); - } -} -EXPORT_SYMBOL(irttp_flow_request); - -/* - * Function irttp_connect_request (self, dtsap_sel, daddr, qos) - * - * Try to connect to remote destination TSAP selector - * - */ -int irttp_connect_request(struct tsap_cb *self, __u8 dtsap_sel, - __u32 saddr, __u32 daddr, - struct qos_info *qos, __u32 max_sdu_size, - struct sk_buff *userdata) -{ - struct sk_buff *tx_skb; - __u8 *frame; - __u8 n; - - pr_debug("%s(), max_sdu_size=%d\n", __func__, max_sdu_size); - - IRDA_ASSERT(self != NULL, return -EBADR;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -EBADR;); - - if (self->connected) { - if (userdata) - dev_kfree_skb(userdata); - return -EISCONN; - } - - /* Any userdata supplied? */ - if (userdata == NULL) { - tx_skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, - GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - /* Reserve space for MUX_CONTROL and LAP header */ - skb_reserve(tx_skb, TTP_MAX_HEADER + TTP_SAR_HEADER); - } else { - tx_skb = userdata; - /* - * Check that the client has reserved enough space for - * headers - */ - IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER, - { dev_kfree_skb(userdata); return -1; }); - } - - /* Initialize connection parameters */ - self->connected = FALSE; - self->avail_credit = 0; - self->rx_max_sdu_size = max_sdu_size; - self->rx_sdu_size = 0; - self->rx_sdu_busy = FALSE; - self->dtsap_sel = dtsap_sel; - - n = self->initial_credit; - - self->remote_credit = 0; - self->send_credit = 0; - - /* - * Give away max 127 credits for now - */ - if (n > 127) { - self->avail_credit = n - 127; - n = 127; - } - - self->remote_credit = n; - - /* SAR enabled? */ - if (max_sdu_size > 0) { - IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER), - { dev_kfree_skb(tx_skb); return -1; }); - - /* Insert SAR parameters */ - frame = skb_push(tx_skb, TTP_HEADER + TTP_SAR_HEADER); - - frame[0] = TTP_PARAMETERS | n; - frame[1] = 0x04; /* Length */ - frame[2] = 0x01; /* MaxSduSize */ - frame[3] = 0x02; /* Value length */ - - put_unaligned(cpu_to_be16((__u16) max_sdu_size), - (__be16 *)(frame+4)); - } else { - /* Insert plain TTP header */ - frame = skb_push(tx_skb, TTP_HEADER); - - /* Insert initial credit in frame */ - frame[0] = n & 0x7f; - } - - /* Connect with IrLMP. No QoS parameters for now */ - return irlmp_connect_request(self->lsap, dtsap_sel, saddr, daddr, qos, - tx_skb); -} -EXPORT_SYMBOL(irttp_connect_request); - -/* - * Function irttp_connect_confirm (handle, qos, skb) - * - * Service user confirms TSAP connection with peer. - * - */ -static void irttp_connect_confirm(void *instance, void *sap, - struct qos_info *qos, __u32 max_seg_size, - __u8 max_header_size, struct sk_buff *skb) -{ - struct tsap_cb *self; - int parameters; - int ret; - __u8 plen; - __u8 n; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - self->max_seg_size = max_seg_size - TTP_HEADER; - self->max_header_size = max_header_size + TTP_HEADER; - - /* - * Check if we have got some QoS parameters back! This should be the - * negotiated QoS for the link. - */ - if (qos) { - pr_debug("IrTTP, Negotiated BAUD_RATE: %02x\n", - qos->baud_rate.bits); - pr_debug("IrTTP, Negotiated BAUD_RATE: %d bps.\n", - qos->baud_rate.value); - } - - n = skb->data[0] & 0x7f; - - pr_debug("%s(), Initial send_credit=%d\n", __func__, n); - - self->send_credit = n; - self->tx_max_sdu_size = 0; - self->connected = TRUE; - - parameters = skb->data[0] & 0x80; - - IRDA_ASSERT(skb->len >= TTP_HEADER, return;); - skb_pull(skb, TTP_HEADER); - - if (parameters) { - plen = skb->data[0]; - - ret = irda_param_extract_all(self, skb->data+1, - IRDA_MIN(skb->len-1, plen), - ¶m_info); - - /* Any errors in the parameter list? */ - if (ret < 0) { - net_warn_ratelimited("%s: error extracting parameters\n", - __func__); - dev_kfree_skb(skb); - - /* Do not accept this connection attempt */ - return; - } - /* Remove parameters */ - skb_pull(skb, IRDA_MIN(skb->len, plen+1)); - } - - pr_debug("%s() send=%d,avail=%d,remote=%d\n", __func__, - self->send_credit, self->avail_credit, self->remote_credit); - - pr_debug("%s(), MaxSduSize=%d\n", __func__, - self->tx_max_sdu_size); - - if (self->notify.connect_confirm) { - self->notify.connect_confirm(self->notify.instance, self, qos, - self->tx_max_sdu_size, - self->max_header_size, skb); - } else - dev_kfree_skb(skb); -} - -/* - * Function irttp_connect_indication (handle, skb) - * - * Some other device is connecting to this TSAP - * - */ -static void irttp_connect_indication(void *instance, void *sap, - struct qos_info *qos, __u32 max_seg_size, __u8 max_header_size, - struct sk_buff *skb) -{ - struct tsap_cb *self; - struct lsap_cb *lsap; - int parameters; - int ret; - __u8 plen; - __u8 n; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - IRDA_ASSERT(skb != NULL, return;); - - lsap = sap; - - self->max_seg_size = max_seg_size - TTP_HEADER; - self->max_header_size = max_header_size+TTP_HEADER; - - pr_debug("%s(), TSAP sel=%02x\n", __func__, self->stsap_sel); - - /* Need to update dtsap_sel if its equal to LSAP_ANY */ - self->dtsap_sel = lsap->dlsap_sel; - - n = skb->data[0] & 0x7f; - - self->send_credit = n; - self->tx_max_sdu_size = 0; - - parameters = skb->data[0] & 0x80; - - IRDA_ASSERT(skb->len >= TTP_HEADER, return;); - skb_pull(skb, TTP_HEADER); - - if (parameters) { - plen = skb->data[0]; - - ret = irda_param_extract_all(self, skb->data+1, - IRDA_MIN(skb->len-1, plen), - ¶m_info); - - /* Any errors in the parameter list? */ - if (ret < 0) { - net_warn_ratelimited("%s: error extracting parameters\n", - __func__); - dev_kfree_skb(skb); - - /* Do not accept this connection attempt */ - return; - } - - /* Remove parameters */ - skb_pull(skb, IRDA_MIN(skb->len, plen+1)); - } - - if (self->notify.connect_indication) { - self->notify.connect_indication(self->notify.instance, self, - qos, self->tx_max_sdu_size, - self->max_header_size, skb); - } else - dev_kfree_skb(skb); -} - -/* - * Function irttp_connect_response (handle, userdata) - * - * Service user is accepting the connection, just pass it down to - * IrLMP! - * - */ -int irttp_connect_response(struct tsap_cb *self, __u32 max_sdu_size, - struct sk_buff *userdata) -{ - struct sk_buff *tx_skb; - __u8 *frame; - int ret; - __u8 n; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - - pr_debug("%s(), Source TSAP selector=%02x\n", __func__, - self->stsap_sel); - - /* Any userdata supplied? */ - if (userdata == NULL) { - tx_skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, - GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - /* Reserve space for MUX_CONTROL and LAP header */ - skb_reserve(tx_skb, TTP_MAX_HEADER + TTP_SAR_HEADER); - } else { - tx_skb = userdata; - /* - * Check that the client has reserved enough space for - * headers - */ - IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER, - { dev_kfree_skb(userdata); return -1; }); - } - - self->avail_credit = 0; - self->remote_credit = 0; - self->rx_max_sdu_size = max_sdu_size; - self->rx_sdu_size = 0; - self->rx_sdu_busy = FALSE; - - n = self->initial_credit; - - /* Frame has only space for max 127 credits (7 bits) */ - if (n > 127) { - self->avail_credit = n - 127; - n = 127; - } - - self->remote_credit = n; - self->connected = TRUE; - - /* SAR enabled? */ - if (max_sdu_size > 0) { - IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER), - { dev_kfree_skb(tx_skb); return -1; }); - - /* Insert TTP header with SAR parameters */ - frame = skb_push(tx_skb, TTP_HEADER + TTP_SAR_HEADER); - - frame[0] = TTP_PARAMETERS | n; - frame[1] = 0x04; /* Length */ - - /* irda_param_insert(self, IRTTP_MAX_SDU_SIZE, frame+1, */ -/* TTP_SAR_HEADER, ¶m_info) */ - - frame[2] = 0x01; /* MaxSduSize */ - frame[3] = 0x02; /* Value length */ - - put_unaligned(cpu_to_be16((__u16) max_sdu_size), - (__be16 *)(frame+4)); - } else { - /* Insert TTP header */ - frame = skb_push(tx_skb, TTP_HEADER); - - frame[0] = n & 0x7f; - } - - ret = irlmp_connect_response(self->lsap, tx_skb); - - return ret; -} -EXPORT_SYMBOL(irttp_connect_response); - -/* - * Function irttp_dup (self, instance) - * - * Duplicate TSAP, can be used by servers to confirm a connection on a - * new TSAP so it can keep listening on the old one. - */ -struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance) -{ - struct tsap_cb *new; - unsigned long flags; - - /* Protect our access to the old tsap instance */ - spin_lock_irqsave(&irttp->tsaps->hb_spinlock, flags); - - /* Find the old instance */ - if (!hashbin_find(irttp->tsaps, (long) orig, NULL)) { - pr_debug("%s(), unable to find TSAP\n", __func__); - spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); - return NULL; - } - - /* Allocate a new instance */ - new = kmemdup(orig, sizeof(struct tsap_cb), GFP_ATOMIC); - if (!new) { - pr_debug("%s(), unable to kmalloc\n", __func__); - spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); - return NULL; - } - spin_lock_init(&new->lock); - - /* We don't need the old instance any more */ - spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); - - /* Try to dup the LSAP (may fail if we were too slow) */ - new->lsap = irlmp_dup(orig->lsap, new); - if (!new->lsap) { - pr_debug("%s(), dup failed!\n", __func__); - kfree(new); - return NULL; - } - - /* Not everything should be copied */ - new->notify.instance = instance; - - /* Initialize internal objects */ - irttp_init_tsap(new); - - /* This is locked */ - hashbin_insert(irttp->tsaps, (irda_queue_t *) new, (long) new, NULL); - - return new; -} -EXPORT_SYMBOL(irttp_dup); - -/* - * Function irttp_disconnect_request (self) - * - * Close this connection please! If priority is high, the queued data - * segments, if any, will be deallocated first - * - */ -int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *userdata, - int priority) -{ - int ret; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); - - /* Already disconnected? */ - if (!self->connected) { - pr_debug("%s(), already disconnected!\n", __func__); - if (userdata) - dev_kfree_skb(userdata); - return -1; - } - - /* Disconnect already pending ? - * We need to use an atomic operation to prevent reentry. This - * function may be called from various context, like user, timer - * for following a disconnect_indication() (i.e. net_bh). - * Jean II */ - if (test_and_set_bit(0, &self->disconnect_pend)) { - pr_debug("%s(), disconnect already pending\n", - __func__); - if (userdata) - dev_kfree_skb(userdata); - - /* Try to make some progress */ - irttp_run_tx_queue(self); - return -1; - } - - /* - * Check if there is still data segments in the transmit queue - */ - if (!skb_queue_empty(&self->tx_queue)) { - if (priority == P_HIGH) { - /* - * No need to send the queued data, if we are - * disconnecting right now since the data will - * not have any usable connection to be sent on - */ - pr_debug("%s(): High priority!!()\n", __func__); - irttp_flush_queues(self); - } else if (priority == P_NORMAL) { - /* - * Must delay disconnect until after all data segments - * have been sent and the tx_queue is empty - */ - /* We'll reuse this one later for the disconnect */ - self->disconnect_skb = userdata; /* May be NULL */ - - irttp_run_tx_queue(self); - - irttp_start_todo_timer(self, HZ/10); - return -1; - } - } - /* Note : we don't need to check if self->rx_queue is full and the - * state of self->rx_sdu_busy because the disconnect response will - * be sent at the LMP level (so even if the peer has its Tx queue - * full of data). - Jean II */ - - pr_debug("%s(), Disconnecting ...\n", __func__); - self->connected = FALSE; - - if (!userdata) { - struct sk_buff *tx_skb; - tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); - if (!tx_skb) - return -ENOMEM; - - /* - * Reserve space for MUX and LAP header - */ - skb_reserve(tx_skb, LMP_MAX_HEADER); - - userdata = tx_skb; - } - ret = irlmp_disconnect_request(self->lsap, userdata); - - /* The disconnect is no longer pending */ - clear_bit(0, &self->disconnect_pend); /* FALSE */ - - return ret; -} -EXPORT_SYMBOL(irttp_disconnect_request); - -/* - * Function irttp_disconnect_indication (self, reason) - * - * Disconnect indication, TSAP disconnected by peer? - * - */ -static void irttp_disconnect_indication(void *instance, void *sap, - LM_REASON reason, struct sk_buff *skb) -{ - struct tsap_cb *self; - - self = instance; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); - - /* Prevent higher layer to send more data */ - self->connected = FALSE; - - /* Check if client has already tried to close the TSAP */ - if (self->close_pend) { - /* In this case, the higher layer is probably gone. Don't - * bother it and clean up the remains - Jean II */ - if (skb) - dev_kfree_skb(skb); - irttp_close_tsap(self); - return; - } - - /* If we are here, we assume that is the higher layer is still - * waiting for the disconnect notification and able to process it, - * even if he tried to disconnect. Otherwise, it would have already - * attempted to close the tsap and self->close_pend would be TRUE. - * Jean II */ - - /* No need to notify the client if has already tried to disconnect */ - if (self->notify.disconnect_indication) - self->notify.disconnect_indication(self->notify.instance, self, - reason, skb); - else - if (skb) - dev_kfree_skb(skb); -} - -/* - * Function irttp_do_data_indication (self, skb) - * - * Try to deliver reassembled skb to layer above, and requeue it if that - * for some reason should fail. We mark rx sdu as busy to apply back - * pressure is necessary. - */ -static void irttp_do_data_indication(struct tsap_cb *self, struct sk_buff *skb) -{ - int err; - - /* Check if client has already closed the TSAP and gone away */ - if (self->close_pend) { - dev_kfree_skb(skb); - return; - } - - err = self->notify.data_indication(self->notify.instance, self, skb); - - /* Usually the layer above will notify that it's input queue is - * starting to get filled by using the flow request, but this may - * be difficult, so it can instead just refuse to eat it and just - * give an error back - */ - if (err) { - pr_debug("%s() requeueing skb!\n", __func__); - - /* Make sure we take a break */ - self->rx_sdu_busy = TRUE; - - /* Need to push the header in again */ - skb_push(skb, TTP_HEADER); - skb->data[0] = 0x00; /* Make sure MORE bit is cleared */ - - /* Put skb back on queue */ - skb_queue_head(&self->rx_queue, skb); - } -} - -/* - * Function irttp_run_rx_queue (self) - * - * Check if we have any frames to be transmitted, or if we have any - * available credit to give away. - */ -static void irttp_run_rx_queue(struct tsap_cb *self) -{ - struct sk_buff *skb; - int more = 0; - - pr_debug("%s() send=%d,avail=%d,remote=%d\n", __func__, - self->send_credit, self->avail_credit, self->remote_credit); - - /* Get exclusive access to the rx queue, otherwise don't touch it */ - if (irda_lock(&self->rx_queue_lock) == FALSE) - return; - - /* - * Reassemble all frames in receive queue and deliver them - */ - while (!self->rx_sdu_busy && (skb = skb_dequeue(&self->rx_queue))) { - /* This bit will tell us if it's the last fragment or not */ - more = skb->data[0] & 0x80; - - /* Remove TTP header */ - skb_pull(skb, TTP_HEADER); - - /* Add the length of the remaining data */ - self->rx_sdu_size += skb->len; - - /* - * If SAR is disabled, or user has requested no reassembly - * of received fragments then we just deliver them - * immediately. This can be requested by clients that - * implements byte streams without any message boundaries - */ - if (self->rx_max_sdu_size == TTP_SAR_DISABLE) { - irttp_do_data_indication(self, skb); - self->rx_sdu_size = 0; - - continue; - } - - /* Check if this is a fragment, and not the last fragment */ - if (more) { - /* - * Queue the fragment if we still are within the - * limits of the maximum size of the rx_sdu - */ - if (self->rx_sdu_size <= self->rx_max_sdu_size) { - pr_debug("%s(), queueing frag\n", - __func__); - skb_queue_tail(&self->rx_fragments, skb); - } else { - /* Free the part of the SDU that is too big */ - dev_kfree_skb(skb); - } - continue; - } - /* - * This is the last fragment, so time to reassemble! - */ - if ((self->rx_sdu_size <= self->rx_max_sdu_size) || - (self->rx_max_sdu_size == TTP_SAR_UNBOUND)) { - /* - * A little optimizing. Only queue the fragment if - * there are other fragments. Since if this is the - * last and only fragment, there is no need to - * reassemble :-) - */ - if (!skb_queue_empty(&self->rx_fragments)) { - skb_queue_tail(&self->rx_fragments, - skb); - - skb = irttp_reassemble_skb(self); - } - - /* Now we can deliver the reassembled skb */ - irttp_do_data_indication(self, skb); - } else { - pr_debug("%s(), Truncated frame\n", __func__); - - /* Free the part of the SDU that is too big */ - dev_kfree_skb(skb); - - /* Deliver only the valid but truncated part of SDU */ - skb = irttp_reassemble_skb(self); - - irttp_do_data_indication(self, skb); - } - self->rx_sdu_size = 0; - } - - /* - * It's not trivial to keep track of how many credits are available - * by incrementing at each packet, because delivery may fail - * (irttp_do_data_indication() may requeue the frame) and because - * we need to take care of fragmentation. - * We want the other side to send up to initial_credit packets. - * We have some frames in our queues, and we have already allowed it - * to send remote_credit. - * No need to spinlock, write is atomic and self correcting... - * Jean II - */ - self->avail_credit = (self->initial_credit - - (self->remote_credit + - skb_queue_len(&self->rx_queue) + - skb_queue_len(&self->rx_fragments))); - - /* Do we have too much credits to send to peer ? */ - if ((self->remote_credit <= TTP_RX_MIN_CREDIT) && - (self->avail_credit > 0)) { - /* Send explicit credit frame */ - irttp_give_credit(self); - /* Note : do *NOT* check if tx_queue is non-empty, that - * will produce deadlocks. I repeat : send a credit frame - * even if we have something to send in our Tx queue. - * If we have credits, it means that our Tx queue is blocked. - * - * Let's suppose the peer can't keep up with our Tx. He will - * flow control us by not sending us any credits, and we - * will stop Tx and start accumulating credits here. - * Up to the point where the peer will stop its Tx queue, - * for lack of credits. - * Let's assume the peer application is single threaded. - * It will block on Tx and never consume any Rx buffer. - * Deadlock. Guaranteed. - Jean II - */ - } - - /* Reset lock */ - self->rx_queue_lock = 0; -} - -#ifdef CONFIG_PROC_FS -struct irttp_iter_state { - int id; -}; - -static void *irttp_seq_start(struct seq_file *seq, loff_t *pos) -{ - struct irttp_iter_state *iter = seq->private; - struct tsap_cb *self; - - /* Protect our access to the tsap list */ - spin_lock_irq(&irttp->tsaps->hb_spinlock); - iter->id = 0; - - for (self = (struct tsap_cb *) hashbin_get_first(irttp->tsaps); - self != NULL; - self = (struct tsap_cb *) hashbin_get_next(irttp->tsaps)) { - if (iter->id == *pos) - break; - ++iter->id; - } - - return self; -} - -static void *irttp_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct irttp_iter_state *iter = seq->private; - - ++*pos; - ++iter->id; - return (void *) hashbin_get_next(irttp->tsaps); -} - -static void irttp_seq_stop(struct seq_file *seq, void *v) -{ - spin_unlock_irq(&irttp->tsaps->hb_spinlock); -} - -static int irttp_seq_show(struct seq_file *seq, void *v) -{ - const struct irttp_iter_state *iter = seq->private; - const struct tsap_cb *self = v; - - seq_printf(seq, "TSAP %d, ", iter->id); - seq_printf(seq, "stsap_sel: %02x, ", - self->stsap_sel); - seq_printf(seq, "dtsap_sel: %02x\n", - self->dtsap_sel); - seq_printf(seq, " connected: %s, ", - self->connected ? "TRUE" : "FALSE"); - seq_printf(seq, "avail credit: %d, ", - self->avail_credit); - seq_printf(seq, "remote credit: %d, ", - self->remote_credit); - seq_printf(seq, "send credit: %d\n", - self->send_credit); - seq_printf(seq, " tx packets: %lu, ", - self->stats.tx_packets); - seq_printf(seq, "rx packets: %lu, ", - self->stats.rx_packets); - seq_printf(seq, "tx_queue len: %u ", - skb_queue_len(&self->tx_queue)); - seq_printf(seq, "rx_queue len: %u\n", - skb_queue_len(&self->rx_queue)); - seq_printf(seq, " tx_sdu_busy: %s, ", - self->tx_sdu_busy ? "TRUE" : "FALSE"); - seq_printf(seq, "rx_sdu_busy: %s\n", - self->rx_sdu_busy ? "TRUE" : "FALSE"); - seq_printf(seq, " max_seg_size: %u, ", - self->max_seg_size); - seq_printf(seq, "tx_max_sdu_size: %u, ", - self->tx_max_sdu_size); - seq_printf(seq, "rx_max_sdu_size: %u\n", - self->rx_max_sdu_size); - - seq_printf(seq, " Used by (%s)\n\n", - self->notify.name); - return 0; -} - -static const struct seq_operations irttp_seq_ops = { - .start = irttp_seq_start, - .next = irttp_seq_next, - .stop = irttp_seq_stop, - .show = irttp_seq_show, -}; - -static int irttp_seq_open(struct inode *inode, struct file *file) -{ - return seq_open_private(file, &irttp_seq_ops, - sizeof(struct irttp_iter_state)); -} - -const struct file_operations irttp_seq_fops = { - .owner = THIS_MODULE, - .open = irttp_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release_private, -}; - -#endif /* PROC_FS */ diff --git a/net/irda/parameters.c b/net/irda/parameters.c deleted file mode 100644 index 16ce32ffe004..000000000000 --- a/net/irda/parameters.c +++ /dev/null @@ -1,584 +0,0 @@ -/********************************************************************* - * - * Filename: parameters.c - * Version: 1.0 - * Description: A more general way to handle (pi,pl,pv) parameters - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Mon Jun 7 10:25:11 1999 - * Modified at: Sun Jan 30 14:08:39 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/types.h> -#include <linux/module.h> - -#include <asm/unaligned.h> -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/parameters.h> - -static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func); -static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func); -static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func); -static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func); - -static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func); -static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func); - -static int irda_param_unpack(__u8 *buf, char *fmt, ...); - -/* Parameter value call table. Must match PV_TYPE */ -static const PV_HANDLER pv_extract_table[] = { - irda_extract_integer, /* Handler for any length integers */ - irda_extract_integer, /* Handler for 8 bits integers */ - irda_extract_integer, /* Handler for 16 bits integers */ - irda_extract_string, /* Handler for strings */ - irda_extract_integer, /* Handler for 32 bits integers */ - irda_extract_octseq, /* Handler for octet sequences */ - irda_extract_no_value /* Handler for no value parameters */ -}; - -static const PV_HANDLER pv_insert_table[] = { - irda_insert_integer, /* Handler for any length integers */ - irda_insert_integer, /* Handler for 8 bits integers */ - irda_insert_integer, /* Handler for 16 bits integers */ - NULL, /* Handler for strings */ - irda_insert_integer, /* Handler for 32 bits integers */ - NULL, /* Handler for octet sequences */ - irda_insert_no_value /* Handler for no value parameters */ -}; - -/* - * Function irda_insert_no_value (self, buf, len, pi, type, func) - */ -static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func) -{ - irda_param_t p; - int ret; - - p.pi = pi; - p.pl = 0; - - /* Call handler for this parameter */ - ret = (*func)(self, &p, PV_GET); - - /* Extract values anyway, since handler may need them */ - irda_param_pack(buf, "bb", p.pi, p.pl); - - if (ret < 0) - return ret; - - return 2; /* Inserted pl+2 bytes */ -} - -/* - * Function irda_extract_no_value (self, buf, len, type, func) - * - * Extracts a parameter without a pv field (pl=0) - * - */ -static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func) -{ - irda_param_t p; - int ret; - - /* Extract values anyway, since handler may need them */ - irda_param_unpack(buf, "bb", &p.pi, &p.pl); - - /* Call handler for this parameter */ - ret = (*func)(self, &p, PV_PUT); - - if (ret < 0) - return ret; - - return 2; /* Extracted pl+2 bytes */ -} - -/* - * Function irda_insert_integer (self, buf, len, pi, type, func) - */ -static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func) -{ - irda_param_t p; - int n = 0; - int err; - - p.pi = pi; /* In case handler needs to know */ - p.pl = type & PV_MASK; /* The integer type codes the length as well */ - p.pv.i = 0; /* Clear value */ - - /* Call handler for this parameter */ - err = (*func)(self, &p, PV_GET); - if (err < 0) - return err; - - /* - * If parameter length is still 0, then (1) this is an any length - * integer, and (2) the handler function does not care which length - * we choose to use, so we pick the one the gives the fewest bytes. - */ - if (p.pl == 0) { - if (p.pv.i < 0xff) { - pr_debug("%s(), using 1 byte\n", __func__); - p.pl = 1; - } else if (p.pv.i < 0xffff) { - pr_debug("%s(), using 2 bytes\n", __func__); - p.pl = 2; - } else { - pr_debug("%s(), using 4 bytes\n", __func__); - p.pl = 4; /* Default length */ - } - } - /* Check if buffer is long enough for insertion */ - if (len < (2+p.pl)) { - net_warn_ratelimited("%s: buffer too short for insertion!\n", - __func__); - return -1; - } - pr_debug("%s(), pi=%#x, pl=%d, pi=%d\n", __func__, - p.pi, p.pl, p.pv.i); - switch (p.pl) { - case 1: - n += irda_param_pack(buf, "bbb", p.pi, p.pl, (__u8) p.pv.i); - break; - case 2: - if (type & PV_BIG_ENDIAN) - p.pv.i = cpu_to_be16((__u16) p.pv.i); - else - p.pv.i = cpu_to_le16((__u16) p.pv.i); - n += irda_param_pack(buf, "bbs", p.pi, p.pl, (__u16) p.pv.i); - break; - case 4: - if (type & PV_BIG_ENDIAN) - cpu_to_be32s(&p.pv.i); - else - cpu_to_le32s(&p.pv.i); - n += irda_param_pack(buf, "bbi", p.pi, p.pl, p.pv.i); - - break; - default: - net_warn_ratelimited("%s: length %d not supported\n", - __func__, p.pl); - /* Skip parameter */ - return -1; - } - - return p.pl+2; /* Inserted pl+2 bytes */ -} - -/* - * Function irda_extract integer (self, buf, len, pi, type, func) - * - * Extract a possibly variable length integer from buffer, and call - * handler for processing of the parameter - */ -static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func) -{ - irda_param_t p; - int n = 0; - int extract_len; /* Real length we extract */ - int err; - - p.pi = pi; /* In case handler needs to know */ - p.pl = buf[1]; /* Extract length of value */ - p.pv.i = 0; /* Clear value */ - extract_len = p.pl; /* Default : extract all */ - - /* Check if buffer is long enough for parsing */ - if (len < (2+p.pl)) { - net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n", - __func__, p.pl, len); - return -1; - } - - /* - * Check that the integer length is what we expect it to be. If the - * handler want a 16 bits integer then a 32 bits is not good enough - * PV_INTEGER means that the handler is flexible. - */ - if (((type & PV_MASK) != PV_INTEGER) && ((type & PV_MASK) != p.pl)) { - net_err_ratelimited("%s: invalid parameter length! Expected %d bytes, but value had %d bytes!\n", - __func__, type & PV_MASK, p.pl); - - /* Most parameters are bit/byte fields or little endian, - * so it's ok to only extract a subset of it (the subset - * that the handler expect). This is necessary, as some - * broken implementations seems to add extra undefined bits. - * If the parameter is shorter than we expect or is big - * endian, we can't play those tricks. Jean II */ - if((p.pl < (type & PV_MASK)) || (type & PV_BIG_ENDIAN)) { - /* Skip parameter */ - return p.pl+2; - } else { - /* Extract subset of it, fallthrough */ - extract_len = type & PV_MASK; - } - } - - - switch (extract_len) { - case 1: - n += irda_param_unpack(buf+2, "b", &p.pv.i); - break; - case 2: - n += irda_param_unpack(buf+2, "s", &p.pv.i); - if (type & PV_BIG_ENDIAN) - p.pv.i = be16_to_cpu((__u16) p.pv.i); - else - p.pv.i = le16_to_cpu((__u16) p.pv.i); - break; - case 4: - n += irda_param_unpack(buf+2, "i", &p.pv.i); - if (type & PV_BIG_ENDIAN) - be32_to_cpus(&p.pv.i); - else - le32_to_cpus(&p.pv.i); - break; - default: - net_warn_ratelimited("%s: length %d not supported\n", - __func__, p.pl); - - /* Skip parameter */ - return p.pl+2; - } - - pr_debug("%s(), pi=%#x, pl=%d, pi=%d\n", __func__, - p.pi, p.pl, p.pv.i); - /* Call handler for this parameter */ - err = (*func)(self, &p, PV_PUT); - if (err < 0) - return err; - - return p.pl+2; /* Extracted pl+2 bytes */ -} - -/* - * Function irda_extract_string (self, buf, len, type, func) - */ -static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func) -{ - char str[33]; - irda_param_t p; - int err; - - p.pi = pi; /* In case handler needs to know */ - p.pl = buf[1]; /* Extract length of value */ - if (p.pl > 32) - p.pl = 32; - - pr_debug("%s(), pi=%#x, pl=%d\n", __func__, - p.pi, p.pl); - - /* Check if buffer is long enough for parsing */ - if (len < (2+p.pl)) { - net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n", - __func__, p.pl, len); - return -1; - } - - /* Should be safe to copy string like this since we have already - * checked that the buffer is long enough */ - strncpy(str, buf+2, p.pl); - - pr_debug("%s(), str=0x%02x 0x%02x\n", - __func__, (__u8)str[0], (__u8)str[1]); - - /* Null terminate string */ - str[p.pl] = '\0'; - - p.pv.c = str; /* Handler will need to take a copy */ - - /* Call handler for this parameter */ - err = (*func)(self, &p, PV_PUT); - if (err < 0) - return err; - - return p.pl+2; /* Extracted pl+2 bytes */ -} - -/* - * Function irda_extract_octseq (self, buf, len, type, func) - */ -static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi, - PV_TYPE type, PI_HANDLER func) -{ - irda_param_t p; - - p.pi = pi; /* In case handler needs to know */ - p.pl = buf[1]; /* Extract length of value */ - - /* Check if buffer is long enough for parsing */ - if (len < (2+p.pl)) { - net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n", - __func__, p.pl, len); - return -1; - } - - pr_debug("%s(), not impl\n", __func__); - - return p.pl+2; /* Extracted pl+2 bytes */ -} - -/* - * Function irda_param_pack (skb, fmt, ...) - * - * Format: - * 'i' = 32 bits integer - * 's' = string - * - */ -int irda_param_pack(__u8 *buf, char *fmt, ...) -{ - irda_pv_t arg; - va_list args; - char *p; - int n = 0; - - va_start(args, fmt); - - for (p = fmt; *p != '\0'; p++) { - switch (*p) { - case 'b': /* 8 bits unsigned byte */ - buf[n++] = (__u8)va_arg(args, int); - break; - case 's': /* 16 bits unsigned short */ - arg.i = (__u16)va_arg(args, int); - put_unaligned((__u16)arg.i, (__u16 *)(buf+n)); n+=2; - break; - case 'i': /* 32 bits unsigned integer */ - arg.i = va_arg(args, __u32); - put_unaligned(arg.i, (__u32 *)(buf+n)); n+=4; - break; -#if 0 - case 'c': /* \0 terminated string */ - arg.c = va_arg(args, char *); - strcpy(buf+n, arg.c); - n += strlen(arg.c) + 1; - break; -#endif - default: - va_end(args); - return -1; - } - } - va_end(args); - - return 0; -} -EXPORT_SYMBOL(irda_param_pack); - -/* - * Function irda_param_unpack (skb, fmt, ...) - */ -static int irda_param_unpack(__u8 *buf, char *fmt, ...) -{ - irda_pv_t arg; - va_list args; - char *p; - int n = 0; - - va_start(args, fmt); - - for (p = fmt; *p != '\0'; p++) { - switch (*p) { - case 'b': /* 8 bits byte */ - arg.ip = va_arg(args, __u32 *); - *arg.ip = buf[n++]; - break; - case 's': /* 16 bits short */ - arg.ip = va_arg(args, __u32 *); - *arg.ip = get_unaligned((__u16 *)(buf+n)); n+=2; - break; - case 'i': /* 32 bits unsigned integer */ - arg.ip = va_arg(args, __u32 *); - *arg.ip = get_unaligned((__u32 *)(buf+n)); n+=4; - break; -#if 0 - case 'c': /* \0 terminated string */ - arg.c = va_arg(args, char *); - strcpy(arg.c, buf+n); - n += strlen(arg.c) + 1; - break; -#endif - default: - va_end(args); - return -1; - } - - } - va_end(args); - - return 0; -} - -/* - * Function irda_param_insert (self, pi, buf, len, info) - * - * Insert the specified parameter (pi) into buffer. Returns number of - * bytes inserted - */ -int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len, - pi_param_info_t *info) -{ - const pi_minor_info_t *pi_minor_info; - __u8 pi_minor; - __u8 pi_major; - int type; - int ret = -1; - int n = 0; - - IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != NULL, return ret;); - - pi_minor = pi & info->pi_mask; - pi_major = pi >> info->pi_major_offset; - - /* Check if the identifier value (pi) is valid */ - if ((pi_major > info->len-1) || - (pi_minor > info->tables[pi_major].len-1)) - { - pr_debug("%s(), no handler for parameter=0x%02x\n", - __func__, pi); - - /* Skip this parameter */ - return -1; - } - - /* Lookup the info on how to parse this parameter */ - pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor]; - - /* Find expected data type for this parameter identifier (pi)*/ - type = pi_minor_info->type; - - /* Check if handler has been implemented */ - if (!pi_minor_info->func) { - net_info_ratelimited("%s: no handler for pi=%#x\n", - __func__, pi); - /* Skip this parameter */ - return -1; - } - - /* Insert parameter value */ - ret = (*pv_insert_table[type & PV_MASK])(self, buf+n, len, pi, type, - pi_minor_info->func); - return ret; -} -EXPORT_SYMBOL(irda_param_insert); - -/* - * Function irda_param_extract (self, buf, len, info) - * - * Parse all parameters. If len is correct, then everything should be - * safe. Returns the number of bytes that was parsed - * - */ -static int irda_param_extract(void *self, __u8 *buf, int len, - pi_param_info_t *info) -{ - const pi_minor_info_t *pi_minor_info; - __u8 pi_minor; - __u8 pi_major; - int type; - int ret = -1; - int n = 0; - - IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != NULL, return ret;); - - pi_minor = buf[n] & info->pi_mask; - pi_major = buf[n] >> info->pi_major_offset; - - /* Check if the identifier value (pi) is valid */ - if ((pi_major > info->len-1) || - (pi_minor > info->tables[pi_major].len-1)) - { - pr_debug("%s(), no handler for parameter=0x%02x\n", - __func__, buf[0]); - - /* Skip this parameter */ - return 2 + buf[n + 1]; /* Continue */ - } - - /* Lookup the info on how to parse this parameter */ - pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor]; - - /* Find expected data type for this parameter identifier (pi)*/ - type = pi_minor_info->type; - - pr_debug("%s(), pi=[%d,%d], type=%d\n", __func__, - pi_major, pi_minor, type); - - /* Check if handler has been implemented */ - if (!pi_minor_info->func) { - net_info_ratelimited("%s: no handler for pi=%#x\n", - __func__, buf[n]); - /* Skip this parameter */ - return 2 + buf[n + 1]; /* Continue */ - } - - /* Parse parameter value */ - ret = (*pv_extract_table[type & PV_MASK])(self, buf+n, len, buf[n], - type, pi_minor_info->func); - return ret; -} - -/* - * Function irda_param_extract_all (self, buf, len, info) - * - * Parse all parameters. If len is correct, then everything should be - * safe. Returns the number of bytes that was parsed - * - */ -int irda_param_extract_all(void *self, __u8 *buf, int len, - pi_param_info_t *info) -{ - int ret = -1; - int n = 0; - - IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != NULL, return ret;); - - /* - * Parse all parameters. Each parameter must be at least two bytes - * long or else there is no point in trying to parse it - */ - while (len > 2) { - ret = irda_param_extract(self, buf+n, len, info); - if (ret < 0) - return ret; - - n += ret; - len -= ret; - } - return n; -} -EXPORT_SYMBOL(irda_param_extract_all); diff --git a/net/irda/qos.c b/net/irda/qos.c deleted file mode 100644 index 25ba8509ad3e..000000000000 --- a/net/irda/qos.c +++ /dev/null @@ -1,771 +0,0 @@ -/********************************************************************* - * - * Filename: qos.c - * Version: 1.0 - * Description: IrLAP QoS parameter negotiation - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Tue Sep 9 00:00:26 1997 - * Modified at: Sun Jan 30 14:29:16 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - ********************************************************************/ - -#include <linux/export.h> - -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/parameters.h> -#include <net/irda/qos.h> -#include <net/irda/irlap.h> -#include <net/irda/irlap_frame.h> - -/* - * Maximum values of the baud rate we negotiate with the other end. - * Most often, you don't have to change that, because Linux-IrDA will - * use the maximum offered by the link layer, which usually works fine. - * In some very rare cases, you may want to limit it to lower speeds... - */ -int sysctl_max_baud_rate = 16000000; -/* - * Maximum value of the lap disconnect timer we negotiate with the other end. - * Most often, the value below represent the best compromise, but some user - * may want to keep the LAP alive longer or shorter in case of link failure. - * Remember that the threshold time (early warning) is fixed to 3s... - */ -int sysctl_max_noreply_time = 12; -/* - * Minimum turn time to be applied before transmitting to the peer. - * Nonzero values (usec) are used as lower limit to the per-connection - * mtt value which was announced by the other end during negotiation. - * Might be helpful if the peer device provides too short mtt. - * Default is 10us which means using the unmodified value given by the - * peer except if it's 0 (0 is likely a bug in the other stack). - */ -unsigned int sysctl_min_tx_turn_time = 10; -/* - * Maximum data size to be used in transmission in payload of LAP frame. - * There is a bit of confusion in the IrDA spec : - * The LAP spec defines the payload of a LAP frame (I field) to be - * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40). - * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY - * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header - * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP - * payload), that's only 2042 bytes. Oups ! - * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s, - * so adjust to 2042... I don't know if this bug applies only for 2048 - * bytes frames or all negotiated frame sizes, but you can use the sysctl - * to play with this value anyway. - * Jean II */ -unsigned int sysctl_max_tx_data_size = 2042; -/* - * Maximum transmit window, i.e. number of LAP frames between turn-around. - * This allow to override what the peer told us. Some peers are buggy and - * don't always support what they tell us. - * Jean II */ -unsigned int sysctl_max_tx_window = 7; - -static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get); -static int irlap_param_link_disconnect(void *instance, irda_param_t *parm, - int get); -static int irlap_param_max_turn_time(void *instance, irda_param_t *param, - int get); -static int irlap_param_data_size(void *instance, irda_param_t *param, int get); -static int irlap_param_window_size(void *instance, irda_param_t *param, - int get); -static int irlap_param_additional_bofs(void *instance, irda_param_t *parm, - int get); -static int irlap_param_min_turn_time(void *instance, irda_param_t *param, - int get); - -#ifndef CONFIG_IRDA_DYNAMIC_WINDOW -static __u32 irlap_requested_line_capacity(struct qos_info *qos); -#endif - -static __u32 min_turn_times[] = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */ -static __u32 baud_rates[] = { 2400, 9600, 19200, 38400, 57600, 115200, 576000, - 1152000, 4000000, 16000000 }; /* bps */ -static __u32 data_sizes[] = { 64, 128, 256, 512, 1024, 2048 }; /* bytes */ -static __u32 add_bofs[] = { 48, 24, 12, 5, 3, 2, 1, 0 }; /* bytes */ -static __u32 max_turn_times[] = { 500, 250, 100, 50 }; /* ms */ -static __u32 link_disc_times[] = { 3, 8, 12, 16, 20, 25, 30, 40 }; /* secs */ - -static __u32 max_line_capacities[10][4] = { - /* 500 ms 250 ms 100 ms 50 ms (max turn time) */ - { 100, 0, 0, 0 }, /* 2400 bps */ - { 400, 0, 0, 0 }, /* 9600 bps */ - { 800, 0, 0, 0 }, /* 19200 bps */ - { 1600, 0, 0, 0 }, /* 38400 bps */ - { 2360, 0, 0, 0 }, /* 57600 bps */ - { 4800, 2400, 960, 480 }, /* 115200 bps */ - { 28800, 11520, 5760, 2880 }, /* 576000 bps */ - { 57600, 28800, 11520, 5760 }, /* 1152000 bps */ - { 200000, 100000, 40000, 20000 }, /* 4000000 bps */ - { 800000, 400000, 160000, 80000 }, /* 16000000 bps */ -}; - -static const pi_minor_info_t pi_minor_call_table_type_0[] = { - { NULL, 0 }, -/* 01 */{ irlap_param_baud_rate, PV_INTEGER | PV_LITTLE_ENDIAN }, - { NULL, 0 }, - { NULL, 0 }, - { NULL, 0 }, - { NULL, 0 }, - { NULL, 0 }, - { NULL, 0 }, -/* 08 */{ irlap_param_link_disconnect, PV_INT_8_BITS } -}; - -static const pi_minor_info_t pi_minor_call_table_type_1[] = { - { NULL, 0 }, - { NULL, 0 }, -/* 82 */{ irlap_param_max_turn_time, PV_INT_8_BITS }, -/* 83 */{ irlap_param_data_size, PV_INT_8_BITS }, -/* 84 */{ irlap_param_window_size, PV_INT_8_BITS }, -/* 85 */{ irlap_param_additional_bofs, PV_INT_8_BITS }, -/* 86 */{ irlap_param_min_turn_time, PV_INT_8_BITS }, -}; - -static const pi_major_info_t pi_major_call_table[] = { - { pi_minor_call_table_type_0, 9 }, - { pi_minor_call_table_type_1, 7 }, -}; - -static pi_param_info_t irlap_param_info = { pi_major_call_table, 2, 0x7f, 7 }; - -/* ---------------------- LOCAL SUBROUTINES ---------------------- */ -/* Note : we start with a bunch of local subroutines. - * As the compiler is "one pass", this is the only way to get them to - * inline properly... - * Jean II - */ -/* - * Function value_index (value, array, size) - * - * Returns the index to the value in the specified array - */ -static inline int value_index(__u32 value, __u32 *array, int size) -{ - int i; - - for (i=0; i < size; i++) - if (array[i] == value) - break; - return i; -} - -/* - * Function index_value (index, array) - * - * Returns value to index in array, easy! - * - */ -static inline __u32 index_value(int index, __u32 *array) -{ - return array[index]; -} - -/* - * Function msb_index (word) - * - * Returns index to most significant bit (MSB) in word - * - */ -static int msb_index (__u16 word) -{ - __u16 msb = 0x8000; - int index = 15; /* Current MSB */ - - /* Check for buggy peers. - * Note : there is a small probability that it could be us, but I - * would expect driver authors to catch that pretty early and be - * able to check precisely what's going on. If a end user sees this, - * it's very likely the peer. - Jean II */ - if (word == 0) { - net_warn_ratelimited("%s(), Detected buggy peer, adjust null PV to 0x1!\n", - __func__); - /* The only safe choice (we don't know the array size) */ - word = 0x1; - } - - while (msb) { - if (word & msb) - break; /* Found it! */ - msb >>=1; - index--; - } - return index; -} - -/* - * Function value_lower_bits (value, array) - * - * Returns a bit field marking all possibility lower than value. - */ -static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field) -{ - int i; - __u16 mask = 0x1; - __u16 result = 0x0; - - for (i=0; i < size; i++) { - /* Add the current value to the bit field, shift mask */ - result |= mask; - mask <<= 1; - /* Finished ? */ - if (array[i] >= value) - break; - } - /* Send back a valid index */ - if(i >= size) - i = size - 1; /* Last item */ - *field = result; - return i; -} - -/* - * Function value_highest_bit (value, array) - * - * Returns a bit field marking the highest possibility lower than value. - */ -static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field) -{ - int i; - __u16 mask = 0x1; - __u16 result = 0x0; - - for (i=0; i < size; i++) { - /* Finished ? */ - if (array[i] <= value) - break; - /* Shift mask */ - mask <<= 1; - } - /* Set the current value to the bit field */ - result |= mask; - /* Send back a valid index */ - if(i >= size) - i = size - 1; /* Last item */ - *field = result; - return i; -} - -/* -------------------------- MAIN CALLS -------------------------- */ - -/* - * Function irda_qos_compute_intersection (qos, new) - * - * Compute the intersection of the old QoS capabilities with new ones - * - */ -void irda_qos_compute_intersection(struct qos_info *qos, struct qos_info *new) -{ - IRDA_ASSERT(qos != NULL, return;); - IRDA_ASSERT(new != NULL, return;); - - /* Apply */ - qos->baud_rate.bits &= new->baud_rate.bits; - qos->window_size.bits &= new->window_size.bits; - qos->min_turn_time.bits &= new->min_turn_time.bits; - qos->max_turn_time.bits &= new->max_turn_time.bits; - qos->data_size.bits &= new->data_size.bits; - qos->link_disc_time.bits &= new->link_disc_time.bits; - qos->additional_bofs.bits &= new->additional_bofs.bits; - - irda_qos_bits_to_value(qos); -} - -/* - * Function irda_init_max_qos_capabilies (qos) - * - * The purpose of this function is for layers and drivers to be able to - * set the maximum QoS possible and then "and in" their own limitations - * - */ -void irda_init_max_qos_capabilies(struct qos_info *qos) -{ - int i; - /* - * These are the maximum supported values as specified on pages - * 39-43 in IrLAP - */ - - /* Use sysctl to set some configurable values... */ - /* Set configured max speed */ - i = value_lower_bits(sysctl_max_baud_rate, baud_rates, 10, - &qos->baud_rate.bits); - sysctl_max_baud_rate = index_value(i, baud_rates); - - /* Set configured max disc time */ - i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8, - &qos->link_disc_time.bits); - sysctl_max_noreply_time = index_value(i, link_disc_times); - - /* LSB is first byte, MSB is second byte */ - qos->baud_rate.bits &= 0x03ff; - - qos->window_size.bits = 0x7f; - qos->min_turn_time.bits = 0xff; - qos->max_turn_time.bits = 0x0f; - qos->data_size.bits = 0x3f; - qos->link_disc_time.bits &= 0xff; - qos->additional_bofs.bits = 0xff; -} -EXPORT_SYMBOL(irda_init_max_qos_capabilies); - -/* - * Function irlap_adjust_qos_settings (qos) - * - * Adjust QoS settings in case some values are not possible to use because - * of other settings - */ -static void irlap_adjust_qos_settings(struct qos_info *qos) -{ - __u32 line_capacity; - int index; - - /* - * Make sure the mintt is sensible. - * Main culprit : Ericsson T39. - Jean II - */ - if (sysctl_min_tx_turn_time > qos->min_turn_time.value) { - int i; - - net_warn_ratelimited("%s(), Detected buggy peer, adjust mtt to %dus!\n", - __func__, sysctl_min_tx_turn_time); - - /* We don't really need bits, but easier this way */ - i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times, - 8, &qos->min_turn_time.bits); - sysctl_min_tx_turn_time = index_value(i, min_turn_times); - qos->min_turn_time.value = sysctl_min_tx_turn_time; - } - - /* - * Not allowed to use a max turn time less than 500 ms if the baudrate - * is less than 115200 - */ - if ((qos->baud_rate.value < 115200) && - (qos->max_turn_time.value < 500)) - { - pr_debug("%s(), adjusting max turn time from %d to 500 ms\n", - __func__, qos->max_turn_time.value); - qos->max_turn_time.value = 500; - } - - /* - * The data size must be adjusted according to the baud rate and max - * turn time - */ - index = value_index(qos->data_size.value, data_sizes, 6); - line_capacity = irlap_max_line_capacity(qos->baud_rate.value, - qos->max_turn_time.value); - -#ifdef CONFIG_IRDA_DYNAMIC_WINDOW - while ((qos->data_size.value > line_capacity) && (index > 0)) { - qos->data_size.value = data_sizes[index--]; - pr_debug("%s(), reducing data size to %d\n", - __func__, qos->data_size.value); - } -#else /* Use method described in section 6.6.11 of IrLAP */ - while (irlap_requested_line_capacity(qos) > line_capacity) { - IRDA_ASSERT(index != 0, return;); - - /* Must be able to send at least one frame */ - if (qos->window_size.value > 1) { - qos->window_size.value--; - pr_debug("%s(), reducing window size to %d\n", - __func__, qos->window_size.value); - } else if (index > 1) { - qos->data_size.value = data_sizes[index--]; - pr_debug("%s(), reducing data size to %d\n", - __func__, qos->data_size.value); - } else { - net_warn_ratelimited("%s(), nothing more we can do!\n", - __func__); - } - } -#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ - /* - * Fix tx data size according to user limits - Jean II - */ - if (qos->data_size.value > sysctl_max_tx_data_size) - /* Allow non discrete adjustement to avoid losing capacity */ - qos->data_size.value = sysctl_max_tx_data_size; - /* - * Override Tx window if user request it. - Jean II - */ - if (qos->window_size.value > sysctl_max_tx_window) - qos->window_size.value = sysctl_max_tx_window; -} - -/* - * Function irlap_negotiate (qos_device, qos_session, skb) - * - * Negotiate QoS values, not really that much negotiation :-) - * We just set the QoS capabilities for the peer station - * - */ -int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb) -{ - int ret; - - ret = irda_param_extract_all(self, skb->data, skb->len, - &irlap_param_info); - - /* Convert the negotiated bits to values */ - irda_qos_bits_to_value(&self->qos_tx); - irda_qos_bits_to_value(&self->qos_rx); - - irlap_adjust_qos_settings(&self->qos_tx); - - pr_debug("Setting BAUD_RATE to %d bps.\n", - self->qos_tx.baud_rate.value); - pr_debug("Setting DATA_SIZE to %d bytes\n", - self->qos_tx.data_size.value); - pr_debug("Setting WINDOW_SIZE to %d\n", - self->qos_tx.window_size.value); - pr_debug("Setting XBOFS to %d\n", - self->qos_tx.additional_bofs.value); - pr_debug("Setting MAX_TURN_TIME to %d ms.\n", - self->qos_tx.max_turn_time.value); - pr_debug("Setting MIN_TURN_TIME to %d usecs.\n", - self->qos_tx.min_turn_time.value); - pr_debug("Setting LINK_DISC to %d secs.\n", - self->qos_tx.link_disc_time.value); - return ret; -} - -/* - * Function irlap_insert_negotiation_params (qos, fp) - * - * Insert QoS negotiaion pararameters into frame - * - */ -int irlap_insert_qos_negotiation_params(struct irlap_cb *self, - struct sk_buff *skb) -{ - int ret; - - /* Insert data rate */ - ret = irda_param_insert(self, PI_BAUD_RATE, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - /* Insert max turnaround time */ - ret = irda_param_insert(self, PI_MAX_TURN_TIME, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - /* Insert data size */ - ret = irda_param_insert(self, PI_DATA_SIZE, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - /* Insert window size */ - ret = irda_param_insert(self, PI_WINDOW_SIZE, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - /* Insert additional BOFs */ - ret = irda_param_insert(self, PI_ADD_BOFS, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - /* Insert minimum turnaround time */ - ret = irda_param_insert(self, PI_MIN_TURN_TIME, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - /* Insert link disconnect/threshold time */ - ret = irda_param_insert(self, PI_LINK_DISC, skb_tail_pointer(skb), - skb_tailroom(skb), &irlap_param_info); - if (ret < 0) - return ret; - skb_put(skb, ret); - - return 0; -} - -/* - * Function irlap_param_baud_rate (instance, param, get) - * - * Negotiate data-rate - * - */ -static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get) -{ - __u16 final; - - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) { - param->pv.i = self->qos_rx.baud_rate.bits; - pr_debug("%s(), baud rate = 0x%02x\n", - __func__, param->pv.i); - } else { - /* - * Stations must agree on baud rate, so calculate - * intersection - */ - pr_debug("Requested BAUD_RATE: 0x%04x\n", (__u16)param->pv.i); - final = (__u16) param->pv.i & self->qos_rx.baud_rate.bits; - - pr_debug("Final BAUD_RATE: 0x%04x\n", final); - self->qos_tx.baud_rate.bits = final; - self->qos_rx.baud_rate.bits = final; - } - - return 0; -} - -/* - * Function irlap_param_link_disconnect (instance, param, get) - * - * Negotiate link disconnect/threshold time. - * - */ -static int irlap_param_link_disconnect(void *instance, irda_param_t *param, - int get) -{ - __u16 final; - - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->qos_rx.link_disc_time.bits; - else { - /* - * Stations must agree on link disconnect/threshold - * time. - */ - pr_debug("LINK_DISC: %02x\n", (__u8)param->pv.i); - final = (__u8) param->pv.i & self->qos_rx.link_disc_time.bits; - - pr_debug("Final LINK_DISC: %02x\n", final); - self->qos_tx.link_disc_time.bits = final; - self->qos_rx.link_disc_time.bits = final; - } - return 0; -} - -/* - * Function irlap_param_max_turn_time (instance, param, get) - * - * Negotiate the maximum turnaround time. This is a type 1 parameter and - * will be negotiated independently for each station - * - */ -static int irlap_param_max_turn_time(void *instance, irda_param_t *param, - int get) -{ - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->qos_rx.max_turn_time.bits; - else - self->qos_tx.max_turn_time.bits = (__u8) param->pv.i; - - return 0; -} - -/* - * Function irlap_param_data_size (instance, param, get) - * - * Negotiate the data size. This is a type 1 parameter and - * will be negotiated independently for each station - * - */ -static int irlap_param_data_size(void *instance, irda_param_t *param, int get) -{ - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->qos_rx.data_size.bits; - else - self->qos_tx.data_size.bits = (__u8) param->pv.i; - - return 0; -} - -/* - * Function irlap_param_window_size (instance, param, get) - * - * Negotiate the window size. This is a type 1 parameter and - * will be negotiated independently for each station - * - */ -static int irlap_param_window_size(void *instance, irda_param_t *param, - int get) -{ - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->qos_rx.window_size.bits; - else - self->qos_tx.window_size.bits = (__u8) param->pv.i; - - return 0; -} - -/* - * Function irlap_param_additional_bofs (instance, param, get) - * - * Negotiate additional BOF characters. This is a type 1 parameter and - * will be negotiated independently for each station. - */ -static int irlap_param_additional_bofs(void *instance, irda_param_t *param, int get) -{ - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->qos_rx.additional_bofs.bits; - else - self->qos_tx.additional_bofs.bits = (__u8) param->pv.i; - - return 0; -} - -/* - * Function irlap_param_min_turn_time (instance, param, get) - * - * Negotiate the minimum turn around time. This is a type 1 parameter and - * will be negotiated independently for each station - */ -static int irlap_param_min_turn_time(void *instance, irda_param_t *param, - int get) -{ - struct irlap_cb *self = (struct irlap_cb *) instance; - - IRDA_ASSERT(self != NULL, return -1;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); - - if (get) - param->pv.i = self->qos_rx.min_turn_time.bits; - else - self->qos_tx.min_turn_time.bits = (__u8) param->pv.i; - - return 0; -} - -/* - * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time) - * - * Calculate the maximum line capacity - * - */ -__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time) -{ - __u32 line_capacity; - int i,j; - - pr_debug("%s(), speed=%d, max_turn_time=%d\n", - __func__, speed, max_turn_time); - - i = value_index(speed, baud_rates, 10); - j = value_index(max_turn_time, max_turn_times, 4); - - IRDA_ASSERT(((i >=0) && (i <10)), return 0;); - IRDA_ASSERT(((j >=0) && (j <4)), return 0;); - - line_capacity = max_line_capacities[i][j]; - - pr_debug("%s(), line capacity=%d bytes\n", - __func__, line_capacity); - - return line_capacity; -} - -#ifndef CONFIG_IRDA_DYNAMIC_WINDOW -static __u32 irlap_requested_line_capacity(struct qos_info *qos) -{ - __u32 line_capacity; - - line_capacity = qos->window_size.value * - (qos->data_size.value + 6 + qos->additional_bofs.value) + - irlap_min_turn_time_in_bytes(qos->baud_rate.value, - qos->min_turn_time.value); - - pr_debug("%s(), requested line capacity=%d\n", - __func__, line_capacity); - - return line_capacity; -} -#endif - -void irda_qos_bits_to_value(struct qos_info *qos) -{ - int index; - - IRDA_ASSERT(qos != NULL, return;); - - index = msb_index(qos->baud_rate.bits); - qos->baud_rate.value = baud_rates[index]; - - index = msb_index(qos->data_size.bits); - qos->data_size.value = data_sizes[index]; - - index = msb_index(qos->window_size.bits); - qos->window_size.value = index+1; - - index = msb_index(qos->min_turn_time.bits); - qos->min_turn_time.value = min_turn_times[index]; - - index = msb_index(qos->max_turn_time.bits); - qos->max_turn_time.value = max_turn_times[index]; - - index = msb_index(qos->link_disc_time.bits); - qos->link_disc_time.value = link_disc_times[index]; - - index = msb_index(qos->additional_bofs.bits); - qos->additional_bofs.value = add_bofs[index]; -} -EXPORT_SYMBOL(irda_qos_bits_to_value); diff --git a/net/irda/timer.c b/net/irda/timer.c deleted file mode 100644 index f2280f73b057..000000000000 --- a/net/irda/timer.c +++ /dev/null @@ -1,231 +0,0 @@ -/********************************************************************* - * - * Filename: timer.c - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Sat Aug 16 00:59:29 1997 - * Modified at: Wed Dec 8 12:50:34 1999 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * - * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/delay.h> - -#include <net/irda/timer.h> -#include <net/irda/irda.h> -#include <net/irda/irda_device.h> -#include <net/irda/irlap.h> -#include <net/irda/irlmp.h> - -extern int sysctl_slot_timeout; - -static void irlap_slot_timer_expired(void* data); -static void irlap_query_timer_expired(void* data); -static void irlap_final_timer_expired(void* data); -static void irlap_wd_timer_expired(void* data); -static void irlap_backoff_timer_expired(void* data); -static void irlap_media_busy_expired(void* data); - -void irlap_start_slot_timer(struct irlap_cb *self, int timeout) -{ - irda_start_timer(&self->slot_timer, timeout, (void *) self, - irlap_slot_timer_expired); -} - -void irlap_start_query_timer(struct irlap_cb *self, int S, int s) -{ - int timeout; - - /* Calculate when the peer discovery should end. Normally, we - * get the end-of-discovery frame, so this is just in case - * we miss it. - * Basically, we multiply the number of remaining slots by our - * slot time, plus add some extra time to properly receive the last - * discovery packet (which is longer due to extra discovery info), - * to avoid messing with for incoming connections requests and - * to accommodate devices that perform discovery slower than us. - * Jean II */ - timeout = msecs_to_jiffies(sysctl_slot_timeout) * (S - s) - + XIDEXTRA_TIMEOUT + SMALLBUSY_TIMEOUT; - - /* Set or re-set the timer. We reset the timer for each received - * discovery query, which allow us to automatically adjust to - * the speed of the peer discovery (faster or slower). Jean II */ - irda_start_timer( &self->query_timer, timeout, (void *) self, - irlap_query_timer_expired); -} - -void irlap_start_final_timer(struct irlap_cb *self, int timeout) -{ - irda_start_timer(&self->final_timer, timeout, (void *) self, - irlap_final_timer_expired); -} - -void irlap_start_wd_timer(struct irlap_cb *self, int timeout) -{ - irda_start_timer(&self->wd_timer, timeout, (void *) self, - irlap_wd_timer_expired); -} - -void irlap_start_backoff_timer(struct irlap_cb *self, int timeout) -{ - irda_start_timer(&self->backoff_timer, timeout, (void *) self, - irlap_backoff_timer_expired); -} - -void irlap_start_mbusy_timer(struct irlap_cb *self, int timeout) -{ - irda_start_timer(&self->media_busy_timer, timeout, - (void *) self, irlap_media_busy_expired); -} - -void irlap_stop_mbusy_timer(struct irlap_cb *self) -{ - /* If timer is activated, kill it! */ - del_timer(&self->media_busy_timer); - - /* If we are in NDM, there is a bunch of events in LAP that - * that be pending due to the media_busy condition, such as - * CONNECT_REQUEST and SEND_UI_FRAME. If we don't generate - * an event, they will wait forever... - * Jean II */ - if (self->state == LAP_NDM) - irlap_do_event(self, MEDIA_BUSY_TIMER_EXPIRED, NULL, NULL); -} - -void irlmp_start_watchdog_timer(struct lsap_cb *self, int timeout) -{ - irda_start_timer(&self->watchdog_timer, timeout, (void *) self, - irlmp_watchdog_timer_expired); -} - -void irlmp_start_discovery_timer(struct irlmp_cb *self, int timeout) -{ - irda_start_timer(&self->discovery_timer, timeout, (void *) self, - irlmp_discovery_timer_expired); -} - -void irlmp_start_idle_timer(struct lap_cb *self, int timeout) -{ - irda_start_timer(&self->idle_timer, timeout, (void *) self, - irlmp_idle_timer_expired); -} - -void irlmp_stop_idle_timer(struct lap_cb *self) -{ - /* If timer is activated, kill it! */ - del_timer(&self->idle_timer); -} - -/* - * Function irlap_slot_timer_expired (data) - * - * IrLAP slot timer has expired - * - */ -static void irlap_slot_timer_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_do_event(self, SLOT_TIMER_EXPIRED, NULL, NULL); -} - -/* - * Function irlap_query_timer_expired (data) - * - * IrLAP query timer has expired - * - */ -static void irlap_query_timer_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_do_event(self, QUERY_TIMER_EXPIRED, NULL, NULL); -} - -/* - * Function irda_final_timer_expired (data) - * - * - * - */ -static void irlap_final_timer_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_do_event(self, FINAL_TIMER_EXPIRED, NULL, NULL); -} - -/* - * Function irda_wd_timer_expired (data) - * - * - * - */ -static void irlap_wd_timer_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_do_event(self, WD_TIMER_EXPIRED, NULL, NULL); -} - -/* - * Function irda_backoff_timer_expired (data) - * - * - * - */ -static void irlap_backoff_timer_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - IRDA_ASSERT(self->magic == LAP_MAGIC, return;); - - irlap_do_event(self, BACKOFF_TIMER_EXPIRED, NULL, NULL); -} - - -/* - * Function irtty_media_busy_expired (data) - * - * - */ -static void irlap_media_busy_expired(void *data) -{ - struct irlap_cb *self = (struct irlap_cb *) data; - - IRDA_ASSERT(self != NULL, return;); - - irda_device_set_media_busy(self->netdev, FALSE); - /* Note : the LAP event will be send in irlap_stop_mbusy_timer(), - * to catch other cases where the flag is cleared (for example - * after a discovery) - Jean II */ -} diff --git a/net/irda/wrapper.c b/net/irda/wrapper.c deleted file mode 100644 index 40a0f993bf13..000000000000 --- a/net/irda/wrapper.c +++ /dev/null @@ -1,492 +0,0 @@ -/********************************************************************* - * - * Filename: wrapper.c - * Version: 1.2 - * Description: IrDA SIR async wrapper layer - * Status: Stable - * Author: Dag Brattli <dagb@cs.uit.no> - * Created at: Mon Aug 4 20:40:53 1997 - * Modified at: Fri Jan 28 13:21:09 2000 - * Modified by: Dag Brattli <dagb@cs.uit.no> - * Modified at: Fri May 28 3:11 CST 1999 - * Modified by: Horst von Brand <vonbrand@sleipnir.valparaiso.cl> - * - * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, - * All Rights Reserved. - * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#include <linux/skbuff.h> -#include <linux/string.h> -#include <linux/module.h> -#include <asm/byteorder.h> - -#include <net/irda/irda.h> -#include <net/irda/wrapper.h> -#include <net/irda/crc.h> -#include <net/irda/irlap.h> -#include <net/irda/irlap_frame.h> -#include <net/irda/irda_device.h> - -/************************** FRAME WRAPPING **************************/ -/* - * Unwrap and unstuff SIR frames - * - * Note : at FIR and MIR, HDLC framing is used and usually handled - * by the controller, so we come here only for SIR... Jean II - */ - -/* - * Function stuff_byte (byte, buf) - * - * Byte stuff one single byte and put the result in buffer pointed to by - * buf. The buffer must at all times be able to have two bytes inserted. - * - * This is in a tight loop, better inline it, so need to be prior to callers. - * (2000 bytes on P6 200MHz, non-inlined ~370us, inline ~170us) - Jean II - */ -static inline int stuff_byte(__u8 byte, __u8 *buf) -{ - switch (byte) { - case BOF: /* FALLTHROUGH */ - case EOF: /* FALLTHROUGH */ - case CE: - /* Insert transparently coded */ - buf[0] = CE; /* Send link escape */ - buf[1] = byte^IRDA_TRANS; /* Complement bit 5 */ - return 2; - /* break; */ - default: - /* Non-special value, no transparency required */ - buf[0] = byte; - return 1; - /* break; */ - } -} - -/* - * Function async_wrap (skb, *tx_buff, buffsize) - * - * Makes a new buffer with wrapping and stuffing, should check that - * we don't get tx buffer overflow. - */ -int async_wrap_skb(struct sk_buff *skb, __u8 *tx_buff, int buffsize) -{ - struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb; - int xbofs; - int i; - int n; - union { - __u16 value; - __u8 bytes[2]; - } fcs; - - /* Initialize variables */ - fcs.value = INIT_FCS; - n = 0; - - /* - * Send XBOF's for required min. turn time and for the negotiated - * additional XBOFS - */ - - if (cb->magic != LAP_MAGIC) { - /* - * This will happen for all frames sent from user-space. - * Nothing to worry about, but we set the default number of - * BOF's - */ - pr_debug("%s(), wrong magic in skb!\n", __func__); - xbofs = 10; - } else - xbofs = cb->xbofs + cb->xbofs_delay; - - pr_debug("%s(), xbofs=%d\n", __func__, xbofs); - - /* Check that we never use more than 115 + 48 xbofs */ - if (xbofs > 163) { - pr_debug("%s(), too many xbofs (%d)\n", __func__, - xbofs); - xbofs = 163; - } - - memset(tx_buff + n, XBOF, xbofs); - n += xbofs; - - /* Start of packet character BOF */ - tx_buff[n++] = BOF; - - /* Insert frame and calc CRC */ - for (i=0; i < skb->len; i++) { - /* - * Check for the possibility of tx buffer overflow. We use - * bufsize-5 since the maximum number of bytes that can be - * transmitted after this point is 5. - */ - if(n >= (buffsize-5)) { - net_err_ratelimited("%s(), tx buffer overflow (n=%d)\n", - __func__, n); - return n; - } - - n += stuff_byte(skb->data[i], tx_buff+n); - fcs.value = irda_fcs(fcs.value, skb->data[i]); - } - - /* Insert CRC in little endian format (LSB first) */ - fcs.value = ~fcs.value; -#ifdef __LITTLE_ENDIAN - n += stuff_byte(fcs.bytes[0], tx_buff+n); - n += stuff_byte(fcs.bytes[1], tx_buff+n); -#else /* ifdef __BIG_ENDIAN */ - n += stuff_byte(fcs.bytes[1], tx_buff+n); - n += stuff_byte(fcs.bytes[0], tx_buff+n); -#endif - tx_buff[n++] = EOF; - - return n; -} -EXPORT_SYMBOL(async_wrap_skb); - -/************************* FRAME UNWRAPPING *************************/ -/* - * Unwrap and unstuff SIR frames - * - * Complete rewrite by Jean II : - * More inline, faster, more compact, more logical. Jean II - * (16 bytes on P6 200MHz, old 5 to 7 us, new 4 to 6 us) - * (24 bytes on P6 200MHz, old 9 to 10 us, new 7 to 8 us) - * (for reference, 115200 b/s is 1 byte every 69 us) - * And reduce wrapper.o by ~900B in the process ;-) - * - * Then, we have the addition of ZeroCopy, which is optional - * (i.e. the driver must initiate it) and improve final processing. - * (2005 B frame + EOF on P6 200MHz, without 30 to 50 us, with 10 to 25 us) - * - * Note : at FIR and MIR, HDLC framing is used and usually handled - * by the controller, so we come here only for SIR... Jean II - */ - -/* - * We can also choose where we want to do the CRC calculation. We can - * do it "inline", as we receive the bytes, or "postponed", when - * receiving the End-Of-Frame. - * (16 bytes on P6 200MHz, inlined 4 to 6 us, postponed 4 to 5 us) - * (24 bytes on P6 200MHz, inlined 7 to 8 us, postponed 5 to 7 us) - * With ZeroCopy : - * (2005 B frame on P6 200MHz, inlined 10 to 25 us, postponed 140 to 180 us) - * Without ZeroCopy : - * (2005 B frame on P6 200MHz, inlined 30 to 50 us, postponed 150 to 180 us) - * (Note : numbers taken with irq disabled) - * - * From those numbers, it's not clear which is the best strategy, because - * we end up running through a lot of data one way or another (i.e. cache - * misses). I personally prefer to avoid the huge latency spike of the - * "postponed" solution, because it come just at the time when we have - * lot's of protocol processing to do and it will hurt our ability to - * reach low link turnaround times... Jean II - */ -//#define POSTPONE_RX_CRC - -/* - * Function async_bump (buf, len, stats) - * - * Got a frame, make a copy of it, and pass it up the stack! We can try - * to inline it since it's only called from state_inside_frame - */ -static inline void -async_bump(struct net_device *dev, - struct net_device_stats *stats, - iobuff_t *rx_buff) -{ - struct sk_buff *newskb; - struct sk_buff *dataskb; - int docopy; - - /* Check if we need to copy the data to a new skb or not. - * If the driver doesn't use ZeroCopy Rx, we have to do it. - * With ZeroCopy Rx, the rx_buff already point to a valid - * skb. But, if the frame is small, it is more efficient to - * copy it to save memory (copy will be fast anyway - that's - * called Rx-copy-break). Jean II */ - docopy = ((rx_buff->skb == NULL) || - (rx_buff->len < IRDA_RX_COPY_THRESHOLD)); - - /* Allocate a new skb */ - newskb = dev_alloc_skb(docopy ? rx_buff->len + 1 : rx_buff->truesize); - if (!newskb) { - stats->rx_dropped++; - /* We could deliver the current skb if doing ZeroCopy Rx, - * but this would stall the Rx path. Better drop the - * packet... Jean II */ - return; - } - - /* Align IP header to 20 bytes (i.e. increase skb->data) - * Note this is only useful with IrLAN, as PPP has a variable - * header size (2 or 1 bytes) - Jean II */ - skb_reserve(newskb, 1); - - if(docopy) { - /* Copy data without CRC (length already checked) */ - skb_copy_to_linear_data(newskb, rx_buff->data, - rx_buff->len - 2); - /* Deliver this skb */ - dataskb = newskb; - } else { - /* We are using ZeroCopy. Deliver old skb */ - dataskb = rx_buff->skb; - /* And hook the new skb to the rx_buff */ - rx_buff->skb = newskb; - rx_buff->head = newskb->data; /* NOT newskb->head */ - //printk(KERN_DEBUG "ZeroCopy : len = %d, dataskb = %p, newskb = %p\n", rx_buff->len, dataskb, newskb); - } - - /* Set proper length on skb (without CRC) */ - skb_put(dataskb, rx_buff->len - 2); - - /* Feed it to IrLAP layer */ - dataskb->dev = dev; - skb_reset_mac_header(dataskb); - dataskb->protocol = htons(ETH_P_IRDA); - - netif_rx(dataskb); - - stats->rx_packets++; - stats->rx_bytes += rx_buff->len; - - /* Clean up rx_buff (redundant with async_unwrap_bof() ???) */ - rx_buff->data = rx_buff->head; - rx_buff->len = 0; -} - -/* - * Function async_unwrap_bof(dev, byte) - * - * Handle Beginning Of Frame character received within a frame - * - */ -static inline void -async_unwrap_bof(struct net_device *dev, - struct net_device_stats *stats, - iobuff_t *rx_buff, __u8 byte) -{ - switch(rx_buff->state) { - case LINK_ESCAPE: - case INSIDE_FRAME: - /* Not supposed to happen, the previous frame is not - * finished - Jean II */ - pr_debug("%s(), Discarding incomplete frame\n", - __func__); - stats->rx_errors++; - stats->rx_missed_errors++; - irda_device_set_media_busy(dev, TRUE); - break; - - case OUTSIDE_FRAME: - case BEGIN_FRAME: - default: - /* We may receive multiple BOF at the start of frame */ - break; - } - - /* Now receiving frame */ - rx_buff->state = BEGIN_FRAME; - rx_buff->in_frame = TRUE; - - /* Time to initialize receive buffer */ - rx_buff->data = rx_buff->head; - rx_buff->len = 0; - rx_buff->fcs = INIT_FCS; -} - -/* - * Function async_unwrap_eof(dev, byte) - * - * Handle End Of Frame character received within a frame - * - */ -static inline void -async_unwrap_eof(struct net_device *dev, - struct net_device_stats *stats, - iobuff_t *rx_buff, __u8 byte) -{ -#ifdef POSTPONE_RX_CRC - int i; -#endif - - switch(rx_buff->state) { - case OUTSIDE_FRAME: - /* Probably missed the BOF */ - stats->rx_errors++; - stats->rx_missed_errors++; - irda_device_set_media_busy(dev, TRUE); - break; - - case BEGIN_FRAME: - case LINK_ESCAPE: - case INSIDE_FRAME: - default: - /* Note : in the case of BEGIN_FRAME and LINK_ESCAPE, - * the fcs will most likely not match and generate an - * error, as expected - Jean II */ - rx_buff->state = OUTSIDE_FRAME; - rx_buff->in_frame = FALSE; - -#ifdef POSTPONE_RX_CRC - /* If we haven't done the CRC as we receive bytes, we - * must do it now... Jean II */ - for(i = 0; i < rx_buff->len; i++) - rx_buff->fcs = irda_fcs(rx_buff->fcs, - rx_buff->data[i]); -#endif - - /* Test FCS and signal success if the frame is good */ - if (rx_buff->fcs == GOOD_FCS) { - /* Deliver frame */ - async_bump(dev, stats, rx_buff); - break; - } else { - /* Wrong CRC, discard frame! */ - irda_device_set_media_busy(dev, TRUE); - - pr_debug("%s(), crc error\n", __func__); - stats->rx_errors++; - stats->rx_crc_errors++; - } - break; - } -} - -/* - * Function async_unwrap_ce(dev, byte) - * - * Handle Character Escape character received within a frame - * - */ -static inline void -async_unwrap_ce(struct net_device *dev, - struct net_device_stats *stats, - iobuff_t *rx_buff, __u8 byte) -{ - switch(rx_buff->state) { - case OUTSIDE_FRAME: - /* Activate carrier sense */ - irda_device_set_media_busy(dev, TRUE); - break; - - case LINK_ESCAPE: - net_warn_ratelimited("%s: state not defined\n", __func__); - break; - - case BEGIN_FRAME: - case INSIDE_FRAME: - default: - /* Stuffed byte coming */ - rx_buff->state = LINK_ESCAPE; - break; - } -} - -/* - * Function async_unwrap_other(dev, byte) - * - * Handle other characters received within a frame - * - */ -static inline void -async_unwrap_other(struct net_device *dev, - struct net_device_stats *stats, - iobuff_t *rx_buff, __u8 byte) -{ - switch(rx_buff->state) { - /* This is on the critical path, case are ordered by - * probability (most frequent first) - Jean II */ - case INSIDE_FRAME: - /* Must be the next byte of the frame */ - if (rx_buff->len < rx_buff->truesize) { - rx_buff->data[rx_buff->len++] = byte; -#ifndef POSTPONE_RX_CRC - rx_buff->fcs = irda_fcs(rx_buff->fcs, byte); -#endif - } else { - pr_debug("%s(), Rx buffer overflow, aborting\n", - __func__); - rx_buff->state = OUTSIDE_FRAME; - } - break; - - case LINK_ESCAPE: - /* - * Stuffed char, complement bit 5 of byte - * following CE, IrLAP p.114 - */ - byte ^= IRDA_TRANS; - if (rx_buff->len < rx_buff->truesize) { - rx_buff->data[rx_buff->len++] = byte; -#ifndef POSTPONE_RX_CRC - rx_buff->fcs = irda_fcs(rx_buff->fcs, byte); -#endif - rx_buff->state = INSIDE_FRAME; - } else { - pr_debug("%s(), Rx buffer overflow, aborting\n", - __func__); - rx_buff->state = OUTSIDE_FRAME; - } - break; - - case OUTSIDE_FRAME: - /* Activate carrier sense */ - if(byte != XBOF) - irda_device_set_media_busy(dev, TRUE); - break; - - case BEGIN_FRAME: - default: - rx_buff->data[rx_buff->len++] = byte; -#ifndef POSTPONE_RX_CRC - rx_buff->fcs = irda_fcs(rx_buff->fcs, byte); -#endif - rx_buff->state = INSIDE_FRAME; - break; - } -} - -/* - * Function async_unwrap_char (dev, rx_buff, byte) - * - * Parse and de-stuff frame received from the IrDA-port - * - * This is the main entry point for SIR drivers. - */ -void async_unwrap_char(struct net_device *dev, - struct net_device_stats *stats, - iobuff_t *rx_buff, __u8 byte) -{ - switch(byte) { - case CE: - async_unwrap_ce(dev, stats, rx_buff, byte); - break; - case BOF: - async_unwrap_bof(dev, stats, rx_buff, byte); - break; - case EOF: - async_unwrap_eof(dev, stats, rx_buff, byte); - break; - default: - async_unwrap_other(dev, stats, rx_buff, byte); - break; - } -} -EXPORT_SYMBOL(async_unwrap_char); - |