summaryrefslogtreecommitdiffstats
path: root/net/mac80211/cfg.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/cfg.c')
-rw-r--r--net/mac80211/cfg.c179
1 files changed, 122 insertions, 57 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 47e0aca614b7..661b878bd19c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -164,7 +164,17 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
sta = sta_info_get(sdata, mac_addr);
else
sta = sta_info_get_bss(sdata, mac_addr);
- if (!sta) {
+ /*
+ * The ASSOC test makes sure the driver is ready to
+ * receive the key. When wpa_supplicant has roamed
+ * using FT, it attempts to set the key before
+ * association has completed, this rejects that attempt
+ * so it will set the key again after assocation.
+ *
+ * TODO: accept the key if we have a station entry and
+ * add it to the device after the station.
+ */
+ if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) {
ieee80211_key_free(sdata->local, key);
err = -ENOENT;
goto out_unlock;
@@ -510,6 +520,7 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
BIT(NL80211_STA_FLAG_WME) |
BIT(NL80211_STA_FLAG_MFP) |
BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+ BIT(NL80211_STA_FLAG_ASSOCIATED) |
BIT(NL80211_STA_FLAG_TDLS_PEER);
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
@@ -521,6 +532,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP);
if (test_sta_flag(sta, WLAN_STA_AUTH))
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
+ if (test_sta_flag(sta, WLAN_STA_ASSOC))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER))
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
}
@@ -930,6 +943,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
sdata->vif.bss_conf.dtim_period = params->dtim_period;
+ sdata->vif.bss_conf.enable_beacon = true;
sdata->vif.bss_conf.ssid_len = params->ssid_len;
if (params->ssid_len)
@@ -1010,8 +1024,15 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
kfree_rcu(old_probe_resp, rcu_head);
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
- sta_info_flush(local, vlan);
- sta_info_flush(local, sdata);
+ sta_info_flush_defer(vlan);
+ sta_info_flush_defer(sdata);
+ rcu_barrier();
+ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
+ sta_info_flush_cleanup(vlan);
+ sta_info_flush_cleanup(sdata);
+
+ sdata->vif.bss_conf.enable_beacon = false;
+ clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
drv_stop_ap(sdata->local, sdata);
@@ -1069,6 +1090,58 @@ static void ieee80211_send_layer2_update(struct sta_info *sta)
netif_rx_ni(skb);
}
+static int sta_apply_auth_flags(struct ieee80211_local *local,
+ struct sta_info *sta,
+ u32 mask, u32 set)
+{
+ int ret;
+
+ if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
+ set & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
+ !test_sta_flag(sta, WLAN_STA_AUTH)) {
+ ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
+ if (ret)
+ return ret;
+ }
+
+ if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
+ set & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
+ !test_sta_flag(sta, WLAN_STA_ASSOC)) {
+ ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ if (ret)
+ return ret;
+ }
+
+ if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
+ if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
+ ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
+ else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
+ ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ else
+ ret = 0;
+ if (ret)
+ return ret;
+ }
+
+ if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
+ !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) &&
+ test_sta_flag(sta, WLAN_STA_ASSOC)) {
+ ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
+ if (ret)
+ return ret;
+ }
+
+ if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
+ !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) &&
+ test_sta_flag(sta, WLAN_STA_AUTH)) {
+ ret = sta_info_move_state(sta, IEEE80211_STA_NONE);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int sta_apply_parameters(struct ieee80211_local *local,
struct sta_info *sta,
struct station_parameters *params)
@@ -1086,52 +1159,20 @@ static int sta_apply_parameters(struct ieee80211_local *local,
mask = params->sta_flags_mask;
set = params->sta_flags_set;
- /*
- * In mesh mode, we can clear AUTHENTICATED flag but must
- * also make ASSOCIATED follow appropriately for the driver
- * API. See also below, after AUTHORIZED changes.
- */
- if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) {
- /* cfg80211 should not allow this in non-mesh modes */
- if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif)))
- return -EINVAL;
-
- if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
- !test_sta_flag(sta, WLAN_STA_AUTH)) {
- ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
- if (ret)
- return ret;
- ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
- if (ret)
- return ret;
- }
- }
-
- if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
- if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
- ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
- else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
- ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
- if (ret)
- return ret;
- }
-
- if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) {
- /* cfg80211 should not allow this in non-mesh modes */
- if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif)))
- return -EINVAL;
-
- if (!(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) &&
- test_sta_flag(sta, WLAN_STA_AUTH)) {
- ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
- if (ret)
- return ret;
- ret = sta_info_move_state(sta, IEEE80211_STA_NONE);
- if (ret)
- return ret;
- }
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ /*
+ * In mesh mode, ASSOCIATED isn't part of the nl80211
+ * API but must follow AUTHENTICATED for driver state.
+ */
+ if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED))
+ mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
+ if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED))
+ set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
}
+ ret = sta_apply_auth_flags(local, sta, mask, set);
+ if (ret)
+ return ret;
if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
@@ -1177,10 +1218,11 @@ static int sta_apply_parameters(struct ieee80211_local *local,
sta->sta.aid = params->aid;
/*
- * FIXME: updating the following information is racy when this
- * function is called from ieee80211_change_station().
- * However, all this information should be static so
- * maybe we should just reject attemps to change it.
+ * Some of the following updates would be racy if called on an
+ * existing station, via ieee80211_change_station(). However,
+ * all such changes are rejected by cfg80211 except for updates
+ * changing the supported rates on an existing but not yet used
+ * TDLS peer.
*/
if (params->listen_interval >= 0)
@@ -1211,18 +1253,33 @@ static int sta_apply_parameters(struct ieee80211_local *local,
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
- if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED)
+ if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) {
+ u32 changed = 0;
+
switch (params->plink_state) {
- case NL80211_PLINK_LISTEN:
case NL80211_PLINK_ESTAB:
+ if (sta->plink_state != NL80211_PLINK_ESTAB)
+ changed = mesh_plink_inc_estab_count(
+ sdata);
+ sta->plink_state = params->plink_state;
+ break;
+ case NL80211_PLINK_LISTEN:
case NL80211_PLINK_BLOCKED:
+ case NL80211_PLINK_OPN_SNT:
+ case NL80211_PLINK_OPN_RCVD:
+ case NL80211_PLINK_CNF_RCVD:
+ case NL80211_PLINK_HOLDING:
+ if (sta->plink_state == NL80211_PLINK_ESTAB)
+ changed = mesh_plink_dec_estab_count(
+ sdata);
sta->plink_state = params->plink_state;
break;
default:
/* nothing */
break;
}
- else
+ ieee80211_bss_info_change_notify(sdata, changed);
+ } else {
switch (params->plink_action) {
case PLINK_ACTION_OPEN:
mesh_plink_open(sta);
@@ -1231,6 +1288,7 @@ static int sta_apply_parameters(struct ieee80211_local *local,
mesh_plink_block(sta);
break;
}
+ }
#endif
}
@@ -1265,6 +1323,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
if (!sta)
return -ENOMEM;
+ /*
+ * defaults -- if userspace wants something else we'll
+ * change it accordingly in sta_apply_parameters()
+ */
sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
@@ -1301,7 +1363,6 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac)
{
- struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -1309,7 +1370,7 @@ static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
if (mac)
return sta_info_destroy_addr_bss(sdata, mac);
- sta_info_flush(local, sdata);
+ sta_info_flush(sdata);
return 0;
}
@@ -1615,6 +1676,9 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate,
sizeof(setup->mcast_rate));
+ sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
+ sdata->vif.bss_conf.dtim_period = setup->dtim_period;
+
return 0;
}
@@ -2197,7 +2261,8 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))