diff options
Diffstat (limited to 'drivers')
37 files changed, 720 insertions, 215 deletions
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 9272c38dd3c6..16a2847b7cdb 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -812,8 +812,10 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - kunmap(intel_private.i8xx_page); - intel_private.i8xx_flush_page = NULL; + if (intel_private.i8xx_flush_page) { + kunmap(intel_private.i8xx_flush_page); + intel_private.i8xx_flush_page = NULL; + } __free_page(intel_private.i8xx_page); intel_private.i8xx_page = NULL; diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 8521401bbd75..eca9ba193e94 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1572,7 +1572,7 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n", hole_off, hole_valid, intlv_sel); - if (intlv_en || + if (intlv_en && (intlv_sel != ((sys_addr >> 12) & intlv_en))) return -EINVAL; diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index d7ca43a828bd..251440cd50a3 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -41,10 +41,10 @@ #define MC_PROC_NAME_MAX_LEN 7 #if PAGE_SHIFT < 20 -#define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) ) -#define MiB_TO_PAGES(mb) ((mb) >> (20 - PAGE_SHIFT)) +#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT)) +#define MiB_TO_PAGES(mb) ((mb) << (20 - PAGE_SHIFT)) #else /* PAGE_SHIFT > 20 */ -#define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) ) +#define PAGES_TO_MiB(pages) ((pages) << (PAGE_SHIFT - 20)) #define MiB_TO_PAGES(mb) ((mb) >> (PAGE_SHIFT - 20)) #endif diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index ba6586a69ccc..795ea69c4d8f 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -586,14 +586,16 @@ struct mem_ctl_info *edac_mc_del_mc(struct device *dev) return NULL; } - /* marking MCI offline */ - mci->op_state = OP_OFFLINE; - del_mc_from_global_list(mci); mutex_unlock(&mem_ctls_mutex); - /* flush workq processes and remove sysfs */ + /* flush workq processes */ edac_mc_workq_teardown(mci); + + /* marking MCI offline */ + mci->op_state = OP_OFFLINE; + + /* remove from sysfs */ edac_remove_sysfs_mci_device(mci); edac_printk(KERN_INFO, EDAC_MC, diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 6985cb1da72c..2baa6708e44c 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -156,12 +156,12 @@ static struct drm_conn_prop_enum_list drm_connector_enum_list[] = { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 }, { DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 }, { DRM_MODE_CONNECTOR_Component, "Component", 0 }, - { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 }, - { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 }, - { DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 }, - { DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 }, + { DRM_MODE_CONNECTOR_9PinDIN, "DIN", 0 }, + { DRM_MODE_CONNECTOR_DisplayPort, "DP", 0 }, + { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A", 0 }, + { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 }, { DRM_MODE_CONNECTOR_TV, "TV", 0 }, - { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 }, + { DRM_MODE_CONNECTOR_eDP, "eDP", 0 }, }; static struct drm_prop_enum_list drm_encoder_enum_list[] = diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 7ca59359fee2..bede10a03407 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -241,7 +241,7 @@ void drm_helper_disable_unused_functions(struct drm_device *dev) } list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - if (!drm_helper_encoder_in_use(encoder)) { + if (encoder->crtc && !drm_helper_encoder_in_use(encoder)) { drm_encoder_disable(encoder); /* disconnector encoder from any connector */ encoder->crtc = NULL; diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 9d3a5030b6e1..16d5155edad1 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -585,10 +585,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, struct timeval now; unsigned long flags; unsigned int seq; + int ret; e = kzalloc(sizeof *e, GFP_KERNEL); - if (e == NULL) - return -ENOMEM; + if (e == NULL) { + ret = -ENOMEM; + goto err_put; + } e->pipe = pipe; e->base.pid = current->pid; @@ -603,9 +606,8 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, spin_lock_irqsave(&dev->event_lock, flags); if (file_priv->event_space < sizeof e->event) { - spin_unlock_irqrestore(&dev->event_lock, flags); - kfree(e); - return -ENOMEM; + ret = -EBUSY; + goto err_unlock; } file_priv->event_space -= sizeof e->event; @@ -626,7 +628,7 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, if ((seq - vblwait->request.sequence) <= (1 << 23)) { e->event.tv_sec = now.tv_sec; e->event.tv_usec = now.tv_usec; - drm_vblank_put(dev, e->pipe); + drm_vblank_put(dev, pipe); list_add_tail(&e->base.link, &e->base.file_priv->event_list); wake_up_interruptible(&e->base.file_priv->event_wait); trace_drm_vblank_event_delivered(current->pid, pipe, @@ -638,6 +640,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, spin_unlock_irqrestore(&dev->event_lock, flags); return 0; + +err_unlock: + spin_unlock_irqrestore(&dev->event_lock, flags); + kfree(e); +err_put: + drm_vblank_put(dev, pipe); + return ret; } /** diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 7a26f4dd21ae..e6800819bca8 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -767,6 +767,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_BLT: value = HAS_BLT(dev); break; + case I915_PARAM_HAS_COHERENT_RINGS: + value = 1; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", param->param); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5e54821af996..275ec6ed43ae 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4374,10 +4374,20 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * use this buffer rather sooner than later, so issuing the required * flush earlier is beneficial. */ - if (obj->write_domain & I915_GEM_GPU_DOMAINS) + if (obj->write_domain & I915_GEM_GPU_DOMAINS) { i915_gem_flush_ring(dev, file_priv, obj_priv->ring, 0, obj->write_domain); + } else if (obj_priv->ring->outstanding_lazy_request) { + /* This ring is not being cleared by active usage, + * so emit a request to do so. + */ + u32 seqno = i915_add_request(dev, + NULL, NULL, + obj_priv->ring); + if (seqno == 0) + ret = -ENOMEM; + } /* Update the active list for the hardware's current position. * Otherwise this only updates on a delayed timer or when irqs diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 25ed911a3112..878fc766a12c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3033,6 +3033,7 @@ #define TRANS_DP_10BPC (1<<9) #define TRANS_DP_6BPC (2<<9) #define TRANS_DP_12BPC (3<<9) +#define TRANS_DP_BPC_MASK (3<<9) #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c index 65c88f9ba12c..2cb8e0b9f1ee 100644 --- a/drivers/gpu/drm/i915/intel_acpi.c +++ b/drivers/gpu/drm/i915/intel_acpi.c @@ -190,37 +190,6 @@ out: kfree(output.pointer); } -static int intel_dsm_switchto(enum vga_switcheroo_client_id id) -{ - return 0; -} - -static int intel_dsm_power_state(enum vga_switcheroo_client_id id, - enum vga_switcheroo_state state) -{ - return 0; -} - -static int intel_dsm_init(void) -{ - return 0; -} - -static int intel_dsm_get_client_id(struct pci_dev *pdev) -{ - if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev)) - return VGA_SWITCHEROO_IGD; - else - return VGA_SWITCHEROO_DIS; -} - -static struct vga_switcheroo_handler intel_dsm_handler = { - .switchto = intel_dsm_switchto, - .power_state = intel_dsm_power_state, - .init = intel_dsm_init, - .get_client_id = intel_dsm_get_client_id, -}; - static bool intel_dsm_pci_probe(struct pci_dev *pdev) { acpi_handle dhandle, intel_handle; @@ -276,11 +245,8 @@ void intel_register_dsm_handler(void) { if (!intel_dsm_detect()) return; - - vga_switcheroo_register_handler(&intel_dsm_handler); } void intel_unregister_dsm_handler(void) { - vga_switcheroo_unregister_handler(); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 255b52ee0091..d9b7092439ef 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2120,9 +2120,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); + TRANS_DP_SYNC_MASK | + TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); + temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; @@ -2712,27 +2714,19 @@ fdi_reduce_ratio(u32 *num, u32 *den) } } -#define DATA_N 0x800000 -#define LINK_N 0x80000 - static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { - u64 temp; - m_n->tu = 64; /* default size */ - temp = (u64) DATA_N * pixel_clock; - temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); - m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ - m_n->gmch_n = DATA_N; + /* BUG_ON(pixel_clock > INT_MAX / 36); */ + m_n->gmch_m = bits_per_pixel * pixel_clock; + m_n->gmch_n = link_clock * nlanes * 8; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); - temp = (u64) LINK_N * pixel_clock; - m_n->link_m = div_u64(temp, link_clock); - m_n->link_n = LINK_N; + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } @@ -3716,6 +3710,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (HAS_PCH_SPLIT(dev)) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int lane = 0, link_bw, bpp; /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ @@ -3799,6 +3794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_crtc->fdi_lanes = lane; + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } @@ -5236,6 +5233,55 @@ static const struct drm_crtc_funcs intel_crtc_funcs = { .page_flip = intel_crtc_page_flip, }; +static void intel_sanitize_modesetting(struct drm_device *dev, + int pipe, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg, val; + + if (HAS_PCH_SPLIT(dev)) + return; + + /* Who knows what state these registers were left in by the BIOS or + * grub? + * + * If we leave the registers in a conflicting state (e.g. with the + * display plane reading from the other pipe than the one we intend + * to use) then when we attempt to teardown the active mode, we will + * not disable the pipes and planes in the correct order -- leaving + * a plane reading from a disabled pipe and possibly leading to + * undefined behaviour. + */ + + reg = DSPCNTR(plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) == 0) + return; + if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) + return; + + /* This display plane is active and attached to the other CPU pipe. */ + pipe = !pipe; + + /* Disable the plane and wait for it to stop reading from the pipe. */ + I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + + if (IS_GEN2(dev)) + intel_wait_for_vblank(dev, pipe); + + if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; + + /* Switch off the pipe. */ + reg = PIPECONF(pipe); + val = I915_READ(reg); + if (val & PIPECONF_ENABLE) { + I915_WRITE(reg, val & ~PIPECONF_ENABLE); + intel_wait_for_pipe_off(dev, pipe); + } +} static void intel_crtc_init(struct drm_device *dev, int pipe) { @@ -5287,6 +5333,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); + + intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 300f64b4238b..df648cb4c296 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1376,6 +1376,9 @@ intel_dp_link_down(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = dev->dev_private; uint32_t DP = intel_dp->DP; + if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0) + return; + DRM_DEBUG_KMS("\n"); if (is_edp(intel_dp)) { @@ -1398,6 +1401,28 @@ intel_dp_link_down(struct intel_dp *intel_dp) if (is_edp(intel_dp)) DP |= DP_LINK_TRAIN_OFF; + + if (!HAS_PCH_CPT(dev) && + I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { + struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); + /* Hardware workaround: leaving our transcoder select + * set to transcoder B while it's off will prevent the + * corresponding HDMI output on transcoder A. + * + * Combine this with another hardware workaround: + * transcoder select bit can only be cleared while the + * port is enabled. + */ + DP &= ~DP_PIPEB_SELECT; + I915_WRITE(intel_dp->output_reg, DP); + + /* Changes to enable or select take place the vblank + * after being written. + */ + intel_wait_for_vblank(intel_dp->base.base.dev, + intel_crtc->pipe); + } + I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); POSTING_READ(intel_dp->output_reg); } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f79327fc6653..25bcedf386fd 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -68,7 +68,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) /** * Sets the power state for the panel. */ -static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) +static void intel_lvds_enable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -82,26 +82,61 @@ static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) lvds_reg = LVDS; } - if (on) { - I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); - intel_panel_set_backlight(dev, dev_priv->backlight_level); - } else { - dev_priv->backlight_level = intel_panel_get_backlight(dev); - - intel_panel_set_backlight(dev, 0); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - if (intel_lvds->pfit_control) { - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - I915_WRITE(PFIT_CONTROL, 0); - intel_lvds->pfit_control = 0; + if (intel_lvds->pfit_dirty) { + /* + * Enable automatic panel scaling so that non-native modes + * fill the screen. The panel fitter should only be + * adjusted whilst the pipe is disabled, according to + * register description and PRM. + */ + DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", + intel_lvds->pfit_control, + intel_lvds->pfit_pgm_ratios); + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) { + DRM_ERROR("timed out waiting for panel to power off\n"); + } else { + I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); intel_lvds->pfit_dirty = false; } + } + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); + POSTING_READ(lvds_reg); + + intel_panel_set_backlight(dev, dev_priv->backlight_level); +} - I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); +static void intel_lvds_disable(struct intel_lvds *intel_lvds) +{ + struct drm_device *dev = intel_lvds->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 ctl_reg, lvds_reg; + + if (HAS_PCH_SPLIT(dev)) { + ctl_reg = PCH_PP_CONTROL; + lvds_reg = PCH_LVDS; + } else { + ctl_reg = PP_CONTROL; + lvds_reg = LVDS; + } + + dev_priv->backlight_level = intel_panel_get_backlight(dev); + intel_panel_set_backlight(dev, 0); + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + + if (intel_lvds->pfit_control) { + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); + + I915_WRITE(PFIT_CONTROL, 0); + intel_lvds->pfit_dirty = true; } + + I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); POSTING_READ(lvds_reg); } @@ -110,9 +145,9 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) struct intel_lvds *intel_lvds = to_intel_lvds(encoder); if (mode == DRM_MODE_DPMS_ON) - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); else - intel_lvds_set_power(intel_lvds, false); + intel_lvds_disable(intel_lvds); /* XXX: We never power down the LVDS pairs. */ } @@ -411,43 +446,18 @@ static void intel_lvds_commit(struct drm_encoder *encoder) /* Always do a full power on as we do not know what state * we were left in. */ - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); } static void intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - /* * The LVDS pin pair will already have been turned on in the * intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ - - if (HAS_PCH_SPLIT(dev)) - return; - - if (!intel_lvds->pfit_dirty) - return; - - /* - * Enable automatic panel scaling so that non-native modes fill the - * screen. Should be enabled before the pipe is enabled, according to - * register description and PRM. - */ - DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", - intel_lvds->pfit_control, - intel_lvds->pfit_pgm_ratios); - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - - I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); - I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); - intel_lvds->pfit_dirty = false; } /** diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index b83306f9244b..89a65be8a3f3 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -156,23 +156,25 @@ static int init_ring_common(struct drm_device *dev, /* G45 ring initialization fails to reset head to zero */ if (head != 0) { - DRM_ERROR("%s head not reset to zero " - "ctl %08x head %08x tail %08x start %08x\n", - ring->name, - I915_READ_CTL(ring), - I915_READ_HEAD(ring), - I915_READ_TAIL(ring), - I915_READ_START(ring)); + DRM_DEBUG_KMS("%s head not reset to zero " + "ctl %08x head %08x tail %08x start %08x\n", + ring->name, + I915_READ_CTL(ring), + I915_READ_HEAD(ring), + I915_READ_TAIL(ring), + I915_READ_START(ring)); I915_WRITE_HEAD(ring, 0); - DRM_ERROR("%s head forced to zero " - "ctl %08x head %08x tail %08x start %08x\n", - ring->name, - I915_READ_CTL(ring), - I915_READ_HEAD(ring), - I915_READ_TAIL(ring), - I915_READ_START(ring)); + if (I915_READ_HEAD(ring) & HEAD_ADDR) { + DRM_ERROR("failed to set %s head to zero " + "ctl %08x head %08x tail %08x start %08x\n", + ring->name, + I915_READ_CTL(ring), + I915_READ_HEAD(ring), + I915_READ_TAIL(ring), + I915_READ_START(ring)); + } } I915_WRITE_CTL(ring, diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index a3552594ccc4..4d7a2e1bdb90 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -878,12 +878,15 @@ void r600_pcie_gart_tlb_flush(struct radeon_device *rdev) u32 tmp; /* flush hdp cache so updates hit vram */ - if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) { + if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) && + !(rdev->flags & RADEON_IS_AGP)) { void __iomem *ptr = (void *)rdev->gart.table.vram.ptr; u32 tmp; /* r7xx hw bug. write to HDP_DEBUG1 followed by fb read * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL + * This seems to cause problems on some AGP cards. Just use the old + * method for them. */ WREG32(HDP_DEBUG1, 0); tmp = readl((void __iomem *)ptr); @@ -1195,8 +1198,10 @@ void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) mc->vram_end, mc->real_vram_size >> 20); } else { u64 base = 0; - if (rdev->flags & RADEON_IS_IGP) - base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24; + if (rdev->flags & RADEON_IS_IGP) { + base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF; + base <<= 24; + } radeon_vram_location(rdev, &rdev->mc, base); rdev->mc.gtt_base_align = 0; radeon_gtt_location(rdev, mc); @@ -3483,10 +3488,12 @@ int r600_debugfs_mc_info_init(struct radeon_device *rdev) void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo) { /* r7xx hw bug. write to HDP_DEBUG1 followed by fb read - * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL + * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL. + * This seems to cause problems on some AGP cards. Just use the old + * method for them. */ if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) && - rdev->vram_scratch.ptr) { + rdev->vram_scratch.ptr && !(rdev->flags & RADEON_IS_AGP)) { void __iomem *ptr = (void *)rdev->vram_scratch.ptr; u32 tmp; diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d8ac1849180d..e12e79326cb1 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -286,7 +286,7 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 mc->mc_vram_size = mc->aper_size; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; - dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n", + dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n", mc->mc_vram_size >> 20, mc->vram_start, mc->vram_end, mc->real_vram_size >> 20); } @@ -323,7 +323,7 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align; } mc->gtt_end = mc->gtt_start + mc->gtt_size - 1; - dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n", + dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n", mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 1d067743fee0..a598d0049aa5 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) u32 c = 0; rbo->placement.fpfn = 0; - rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT; + rbo->placement.lpfn = 0; rbo->placement.placement = rbo->placements; rbo->placement.busy_placement = rbo->placements; if (domain & RADEON_GEM_DOMAIN_VRAM) @@ -91,7 +91,8 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj, { struct radeon_bo *bo; enum ttm_bo_type type; - int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT; + unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT; + unsigned long max_size = 0; int r; if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) { @@ -104,6 +105,14 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj, } *bo_ptr = NULL; + /* maximun bo size is the minimun btw visible vram and gtt size */ + max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size); + if ((page_align << PAGE_SHIFT) >= max_size) { + printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n", + __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20); + return -ENOMEM; + } + retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 4bf969c0a32b..be0fdd58aa29 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -916,27 +916,27 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, int nr = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct adm1026_data *data = i2c_get_clientdata(client); - int val, orig_div, new_div, shift; + int val, orig_div, new_div; val = simple_strtol(buf, NULL, 10); new_div = DIV_TO_REG(val); - if (new_div == 0) { - return -EINVAL; - } + mutex_lock(&data->update_lock); orig_div = data->fan_div[nr]; data->fan_div[nr] = DIV_FROM_REG(new_div); if (nr < 4) { /* 0 <= nr < 4 */ - shift = 2 * nr; adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3, - ((DIV_TO_REG(orig_div) & (~(0x03 << shift))) | - (new_div << shift))); + (DIV_TO_REG(data->fan_div[0]) << 0) | + (DIV_TO_REG(data->fan_div[1]) << 2) | + (DIV_TO_REG(data->fan_div[2]) << 4) | + (DIV_TO_REG(data->fan_div[3]) << 6)); } else { /* 3 < nr < 8 */ - shift = 2 * (nr - 4); adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7, - ((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) | - (new_div << shift))); + (DIV_TO_REG(data->fan_div[4]) << 0) | + (DIV_TO_REG(data->fan_div[5]) << 2) | + (DIV_TO_REG(data->fan_div[6]) << 4) | + (DIV_TO_REG(data->fan_div[7]) << 6)); } if (data->fan_div[nr] != orig_div) { diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 14a5d981be7d..a428a9264195 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -187,6 +187,7 @@ static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 }; #define IT87_REG_FAN_MAIN_CTRL 0x13 #define IT87_REG_FAN_CTL 0x14 #define IT87_REG_PWM(nr) (0x15 + (nr)) +#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8) #define IT87_REG_VIN(nr) (0x20 + (nr)) #define IT87_REG_TEMP(nr) (0x29 + (nr)) @@ -251,12 +252,16 @@ struct it87_data { u8 fan_main_ctrl; /* Register value */ u8 fan_ctl; /* Register value */ - /* The following 3 arrays correspond to the same registers. The - * meaning of bits 6-0 depends on the value of bit 7, and we want - * to preserve settings on mode changes, so we have to track all - * values separately. */ + /* The following 3 arrays correspond to the same registers up to + * the IT8720F. The meaning of bits 6-0 depends on the value of bit + * 7, and we want to preserve settings on mode changes, so we have + * to track all values separately. + * Starting with the IT8721F, the manual PWM duty cycles are stored + * in separate registers (8-bit values), so the separate tracking + * is no longer needed, but it is still done to keep the driver + * simple. */ u8 pwm_ctrl[3]; /* Register value */ - u8 pwm_duty[3]; /* Manual PWM value set by user (bit 6-0) */ + u8 pwm_duty[3]; /* Manual PWM value set by user */ u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */ /* Automatic fan speed control registers */ @@ -832,7 +837,9 @@ static ssize_t set_pwm_enable(struct device *dev, data->fan_main_ctrl); } else { if (val == 1) /* Manual mode */ - data->pwm_ctrl[nr] = data->pwm_duty[nr]; + data->pwm_ctrl[nr] = data->type == it8721 ? + data->pwm_temp_map[nr] : + data->pwm_duty[nr]; else /* Automatic mode */ data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr]; it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]); @@ -858,12 +865,25 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, return -EINVAL; mutex_lock(&data->update_lock); - data->pwm_duty[nr] = pwm_to_reg(data, val); - /* If we are in manual mode, write the duty cycle immediately; - * otherwise, just store it for later use. */ - if (!(data->pwm_ctrl[nr] & 0x80)) { - data->pwm_ctrl[nr] = data->pwm_duty[nr]; - it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]); + if (data->type == it8721) { + /* If we are in automatic mode, the PWM duty cycle register + * is read-only so we can't write the value */ + if (data->pwm_ctrl[nr] & 0x80) { + mutex_unlock(&data->update_lock); + return -EBUSY; + } + data->pwm_duty[nr] = pwm_to_reg(data, val); + it87_write_value(data, IT87_REG_PWM_DUTY(nr), + data->pwm_duty[nr]); + } else { + data->pwm_duty[nr] = pwm_to_reg(data, val); + /* If we are in manual mode, write the duty cycle immediately; + * otherwise, just store it for later use. */ + if (!(data->pwm_ctrl[nr] & 0x80)) { + data->pwm_ctrl[nr] = data->pwm_duty[nr]; + it87_write_value(data, IT87_REG_PWM(nr), + data->pwm_ctrl[nr]); + } } mutex_unlock(&data->update_lock); return count; @@ -1958,7 +1978,10 @@ static void __devinit it87_init_device(struct platform_device *pdev) * channels to use when later setting to automatic mode later. * Use a 1:1 mapping by default (we are clueless.) * In both cases, the value can (and should) be changed by the user - * prior to switching to a different mode. */ + * prior to switching to a different mode. + * Note that this is no longer needed for the IT8721F and later, as + * these have separate registers for the temperature mapping and the + * manual duty cycle. */ for (i = 0; i < 3; i++) { data->pwm_temp_map[i] = i; data->pwm_duty[i] = 0x7f; /* Full speed */ @@ -2034,10 +2057,16 @@ static void __devinit it87_init_device(struct platform_device *pdev) static void it87_update_pwm_ctrl(struct it87_data *data, int nr) { data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr)); - if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + if (data->type == it8721) { data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; - else /* Manual mode */ - data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; + data->pwm_duty[nr] = it87_read_value(data, + IT87_REG_PWM_DUTY(nr)); + } else { + if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; + else /* Manual mode */ + data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; + } if (has_old_autopwm(data)) { int i; diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index d53b9e900234..27b6a3ce18ca 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -245,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs) goto err_free_tgfx; } + parport_put_port(pp); return tgfx; err_free_dev: diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b8c51b9781db..3a87f3ba5f75 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -179,6 +179,22 @@ config KEYBOARD_GPIO To compile this driver as a module, choose M here: the module will be called gpio_keys. +config KEYBOARD_GPIO_POLLED + tristate "Polled GPIO buttons" + depends on GENERIC_GPIO + select INPUT_POLLDEV + help + This driver implements support for buttons connected + to GPIO pins that are not capable of generating interrupts. + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys_polled. + config KEYBOARD_TCA6416 tristate "TCA6416 Keypad Support" depends on I2C diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a34452e8ebe2..622de73a445d 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o +obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c new file mode 100644 index 000000000000..4c17aff20657 --- /dev/null +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -0,0 +1,261 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com> + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> + +#define DRV_NAME "gpio-keys-polled" + +struct gpio_keys_button_data { + int last_state; + int count; + int threshold; + int can_sleep; +}; + +struct gpio_keys_polled_dev { + struct input_polled_dev *poll_dev; + struct device *dev; + struct gpio_keys_platform_data *pdata; + struct gpio_keys_button_data data[0]; +}; + +static void gpio_keys_polled_check_state(struct input_dev *input, + struct gpio_keys_button *button, + struct gpio_keys_button_data *bdata) +{ + int state; + + if (bdata->can_sleep) + state = !!gpio_get_value_cansleep(button->gpio); + else + state = !!gpio_get_value(button->gpio); + + if (state != bdata->last_state) { + unsigned int type = button->type ?: EV_KEY; + + input_event(input, type, button->code, + !!(state ^ button->active_low)); + input_sync(input); + bdata->count = 0; + bdata->last_state = state; + } +} + +static void gpio_keys_polled_poll(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + for (i = 0; i < bdev->pdata->nbuttons; i++) { + struct gpio_keys_button_data *bdata = &bdev->data[i]; + + if (bdata->count < bdata->threshold) + bdata->count++; + else + gpio_keys_polled_check_state(input, &pdata->buttons[i], + bdata); + } +} + +static void gpio_keys_polled_open(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->enable) + pdata->enable(bdev->dev); +} + +static void gpio_keys_polled_close(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->disable) + pdata->disable(bdev->dev); +} + +static int __devinit gpio_keys_polled_probe(struct platform_device *pdev) +{ + struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct gpio_keys_polled_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error; + int i; + + if (!pdata || !pdata->poll_interval) + return -EINVAL; + + bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) + + pdata->nbuttons * sizeof(struct gpio_keys_button_data), + GFP_KERNEL); + if (!bdev) { + dev_err(dev, "no memory for private data\n"); + return -ENOMEM; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + dev_err(dev, "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_bdev; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_keys_polled_poll; + poll_dev->poll_interval = pdata->poll_interval; + poll_dev->open = gpio_keys_polled_open; + poll_dev->close = gpio_keys_polled_close; + + input = poll_dev->input; + + input->evbit[0] = BIT(EV_KEY); + input->name = pdev->name; + input->phys = DRV_NAME"/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_keys_button *button = &pdata->buttons[i]; + struct gpio_keys_button_data *bdata = &bdev->data[i]; + unsigned int gpio = button->gpio; + unsigned int type = button->type ?: EV_KEY; + + if (button->wakeup) { + dev_err(dev, DRV_NAME " does not support wakeup\n"); + error = -EINVAL; + goto err_free_gpio; + } + + error = gpio_request(gpio, + button->desc ? button->desc : DRV_NAME); + if (error) { + dev_err(dev, "unable to claim gpio %u, err=%d\n", + gpio, error); + goto err_free_gpio; + } + + error = gpio_direction_input(gpio); + if (error) { + dev_err(dev, + "unable to set direction on gpio %u, err=%d\n", + gpio, error); + goto err_free_gpio; + } + + bdata->can_sleep = gpio_cansleep(gpio); + bdata->last_state = -1; + bdata->threshold = DIV_ROUND_UP(button->debounce_interval, + pdata->poll_interval); + + input_set_capability(input, type, button->code); + } + + bdev->poll_dev = poll_dev; + bdev->dev = dev; + bdev->pdata = pdata; + platform_set_drvdata(pdev, bdev); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "unable to register polled device, err=%d\n", + error); + goto err_free_gpio; + } + + /* report initial state of the buttons */ + for (i = 0; i < pdata->nbuttons; i++) + gpio_keys_polled_check_state(input, &pdata->buttons[i], + &bdev->data[i]); + + return 0; + +err_free_gpio: + while (--i >= 0) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(poll_dev); + +err_free_bdev: + kfree(bdev); + + platform_set_drvdata(pdev, NULL); + return error; +} + +static int __devexit gpio_keys_polled_remove(struct platform_device *pdev) +{ + struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev); + struct gpio_keys_platform_data *pdata = bdev->pdata; + int i; + + input_unregister_polled_device(bdev->poll_dev); + + for (i = 0; i < pdata->nbuttons; i++) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(bdev->poll_dev); + + kfree(bdev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver gpio_keys_polled_driver = { + .probe = gpio_keys_polled_probe, + .remove = __devexit_p(gpio_keys_polled_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_keys_polled_init(void) +{ + return platform_driver_register(&gpio_keys_polled_driver); +} + +static void __exit gpio_keys_polled_exit(void) +{ + platform_driver_unregister(&gpio_keys_polled_driver); +} + +module_init(gpio_keys_polled_init); +module_exit(gpio_keys_polled_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_DESCRIPTION("Polled GPIO Buttons driver"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 613a3652f98f..0aefaa885871 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -51,7 +51,8 @@ #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) #define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) -#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100) +#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ +#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) /* synaptics modes query bits */ diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index b3252ef1e279..4852b440960a 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1436,6 +1436,12 @@ static struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD8 = + { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xDA = + { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xDB = + { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; #define USB_DEVICE_WACOM(prod) \ USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ @@ -1504,6 +1510,9 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, + { USB_DEVICE_WACOM(0xD8) }, + { USB_DEVICE_WACOM(0xDA) }, + { USB_DEVICE_WACOM(0xDB) }, { USB_DEVICE_WACOM(0xF0) }, { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0x90) }, diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index f45f80f6d336..73fd6642b681 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_ITM {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, + {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 60a5a5c6b50a..d235f44fd7a3 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -81,6 +81,8 @@ MODULE_PARM_DESC(wapf, "WAPF value"); static int wlan_status = 1; static int bluetooth_status = 1; +static int wimax_status = -1; +static int wwan_status = -1; module_param(wlan_status, int, 0444); MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot " @@ -92,6 +94,16 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " "(0 = disabled, 1 = enabled, -1 = don't do anything). " "default is 1"); +module_param(wimax_status, int, 0444); +MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is 1"); + +module_param(wwan_status, int, 0444); +MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot " + "(0 = disabled, 1 = enabled, -1 = don't do anything). " + "default is 1"); + /* * Some events we use, same for all Asus */ @@ -114,6 +126,8 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " */ #define WL_RSTS 0x01 /* internal Wifi */ #define BT_RSTS 0x02 /* internal Bluetooth */ +#define WM_RSTS 0x08 /* internal wimax */ +#define WW_RSTS 0x20 /* internal wwan */ /* LED */ #define METHOD_MLED "MLED" @@ -132,6 +146,11 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " */ #define METHOD_WLAN "WLED" #define METHOD_BLUETOOTH "BLED" + +/* WWAN and WIMAX */ +#define METHOD_WWAN "GSMC" +#define METHOD_WIMAX "WMXC" + #define METHOD_WL_STATUS "RSTS" /* Brightness */ @@ -883,6 +902,64 @@ static ssize_t store_bluetooth(struct device *dev, } /* + * Wimax + */ +static int asus_wimax_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) { + pr_warning("Error setting wimax status to %d", status); + return -EIO; + } + return 0; +} + +static ssize_t show_wimax(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS)); +} + +static ssize_t store_wimax(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX); +} + +/* + * Wwan + */ +static int asus_wwan_set(struct asus_laptop *asus, int status) +{ + if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) { + pr_warning("Error setting wwan status to %d", status); + return -EIO; + } + return 0; +} + +static ssize_t show_wwan(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS)); +} + +static ssize_t store_wwan(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct asus_laptop *asus = dev_get_drvdata(dev); + + return sysfs_acpi_set(asus, buf, count, METHOD_WWAN); +} + +/* * Display */ static void asus_set_display(struct asus_laptop *asus, int value) @@ -1202,6 +1279,8 @@ static DEVICE_ATTR(infos, S_IRUGO, show_infos, NULL); static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan); static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR, show_bluetooth, store_bluetooth); +static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax); +static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan); static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp); static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd); static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl); @@ -1212,6 +1291,8 @@ static struct attribute *asus_attributes[] = { &dev_attr_infos.attr, &dev_attr_wlan.attr, &dev_attr_bluetooth.attr, + &dev_attr_wimax.attr, + &dev_attr_wwan.attr, &dev_attr_display.attr, &dev_attr_ledd.attr, &dev_attr_ls_level.attr, @@ -1239,6 +1320,13 @@ static mode_t asus_sysfs_is_visible(struct kobject *kobj, } else if (attr == &dev_attr_display.attr) { supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL); + } else if (attr == &dev_attr_wimax.attr) { + supported = + !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL); + + } else if (attr == &dev_attr_wwan.attr) { + supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL); + } else if (attr == &dev_attr_ledd.attr) { supported = !acpi_check_handle(handle, METHOD_LEDD, NULL); @@ -1397,7 +1485,8 @@ static int asus_laptop_get_info(struct asus_laptop *asus) /* * The HWRS method return informations about the hardware. - * 0x80 bit is for WLAN, 0x100 for Bluetooth. + * 0x80 bit is for WLAN, 0x100 for Bluetooth, + * 0x40 for WWAN, 0x10 for WIMAX. * The significance of others is yet to be found. */ status = @@ -1440,6 +1529,12 @@ static int __devinit asus_acpi_init(struct asus_laptop *asus) if (wlan_status >= 0) asus_wlan_set(asus, !!wlan_status); + if (wimax_status >= 0) + asus_wimax_set(asus, !!wimax_status); + + if (wwan_status >= 0) + asus_wwan_set(asus, !!wwan_status); + /* Keyboard Backlight is on by default */ if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL)) asus_kled_set(asus, 1); diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index 462ceab93f87..0d50fbbe2478 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -298,8 +298,8 @@ static void eeepc_wmi_notify(u32 value, void *context) kfree(obj); } -static int store_cpufv(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { int value; struct acpi_buffer input = { (acpi_size)sizeof(value), &value }; diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 1dac659b5e0c..9e05af9c41cb 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -172,6 +172,8 @@ static int hp_wmi_perform_query(int query, int write, u32 *buffer, bios_return = *((struct bios_return *)obj->buffer.pointer); memcpy(buffer, &bios_return.value, sizeof(bios_return.value)); + + kfree(obj); return 0; } diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 3c2c6b91ecb3..94a114aa8e28 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <linux/sysdev.h> #include <linux/dmi.h> +#include <linux/efi.h> #include <linux/mutex.h> #include <asm/bios_ebda.h> @@ -220,32 +221,13 @@ static void rtl_teardown_sysfs(void) { sysdev_class_unregister(&class_rtl); } -static int dmi_check_cb(const struct dmi_system_id *id) -{ - RTL_DEBUG("found IBM server '%s'\n", id->ident); - return 0; -} - -#define ibm_dmi_entry(NAME, TYPE) \ -{ \ - .ident = NAME, \ - .matches = { \ - DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \ - DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \ - }, \ - .callback = dmi_check_cb \ -} static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = { - ibm_dmi_entry("BladeCenter LS21", "7971"), - ibm_dmi_entry("BladeCenter LS22", "7901"), - ibm_dmi_entry("BladeCenter HS21 XM", "7995"), - ibm_dmi_entry("BladeCenter HS22", "7870"), - ibm_dmi_entry("BladeCenter HS22V", "7871"), - ibm_dmi_entry("System x3550 M2", "7946"), - ibm_dmi_entry("System x3650 M2", "7947"), - ibm_dmi_entry("System x3550 M3", "7944"), - ibm_dmi_entry("System x3650 M3", "7945"), + { \ + .matches = { \ + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \ + }, \ + }, { } }; @@ -257,7 +239,7 @@ static int __init ibm_rtl_init(void) { if (force) pr_warning("ibm-rtl: module loaded by force\n"); /* first ensure that we are running on IBM HW */ - else if (!dmi_check_system(ibm_rtl_dmi_table)) + else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table)) return -ENODEV; /* Get the address for the Extended BIOS Data Area */ @@ -302,7 +284,7 @@ static int __init ibm_rtl_init(void) { RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n", rtl_cmd_width, rtl_cmd_type); addr = ioread32(&rtl_table->cmd_port_address); - RTL_DEBUG("addr = %#llx\n", addr); + RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr); plen = rtl_cmd_width/sizeof(char); rtl_cmd_addr = rtl_port_map(addr, plen); RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr); diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index 42a5469a2459..35278ad7e628 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -43,16 +43,18 @@ MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"); #define dprintk(msg...) pr_debug(DRV_PFX msg) -#define KEYCODE_BASE 0xD0 -#define MSI_WMI_BRIGHTNESSUP KEYCODE_BASE -#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1) -#define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2) -#define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3) +#define SCANCODE_BASE 0xD0 +#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE +#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1) +#define MSI_WMI_VOLUMEUP (SCANCODE_BASE + 2) +#define MSI_WMI_VOLUMEDOWN (SCANCODE_BASE + 3) +#define MSI_WMI_MUTE (SCANCODE_BASE + 4) static struct key_entry msi_wmi_keymap[] = { { KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} }, { KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} }, { KE_KEY, MSI_WMI_VOLUMEUP, {KEY_VOLUMEUP} }, { KE_KEY, MSI_WMI_VOLUMEDOWN, {KEY_VOLUMEDOWN} }, + { KE_KEY, MSI_WMI_MUTE, {KEY_MUTE} }, { KE_END, 0} }; static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1]; @@ -169,7 +171,7 @@ static void msi_wmi_notify(u32 value, void *context) ktime_t diff; cur = ktime_get_real(); diff = ktime_sub(cur, last_pressed[key->code - - KEYCODE_BASE]); + SCANCODE_BASE]); /* Ignore event if the same event happened in a 50 ms timeframe -> Key press may result in 10-20 GPEs */ if (ktime_to_us(diff) < 1000 * 50) { @@ -178,7 +180,7 @@ static void msi_wmi_notify(u32 value, void *context) key->code, ktime_to_us(diff)); return; } - last_pressed[key->code - KEYCODE_BASE] = cur; + last_pressed[key->code - SCANCODE_BASE] = cur; if (key->type == KE_KEY && /* Brightness is served via acpi video driver */ diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 2d61186ad5a2..e8c21994b36d 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8497,7 +8497,6 @@ static void ibm_exit(struct ibm_struct *ibm) ibm->acpi->type, dispatch_acpi_notify); ibm->flags.acpi_notify_installed = 0; - ibm->flags.acpi_notify_installed = 0; } if (ibm->flags.proc_created) { diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 06f304f46e02..4276da7291b8 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -135,6 +135,7 @@ static const struct key_entry toshiba_acpi_keymap[] __initconst = { { KE_KEY, 0x141, { KEY_BRIGHTNESSUP } }, { KE_KEY, 0x142, { KEY_WLAN } }, { KE_KEY, 0x143, { KEY_PROG1 } }, + { KE_KEY, 0x17f, { KEY_FN } }, { KE_KEY, 0xb05, { KEY_PROG2 } }, { KE_KEY, 0xb06, { KEY_WWW } }, { KE_KEY, 0xb07, { KEY_MAIL } }, diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 104b77c87ef5..aecd9a9b549f 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -755,7 +755,7 @@ static bool guid_already_parsed(const char *guid_string) struct wmi_block *wblock; list_for_each_entry(wblock, &wmi_block_list, list) - if (strncmp(wblock->gblock.guid, guid_string, 16) == 0) + if (memcmp(wblock->gblock.guid, guid_string, 16) == 0) return true; return false; diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index 51237fbb1bbb..6d20b0454a1d 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -231,8 +231,7 @@ static int tps6586x_dvm_voltages[] = { }; #define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \ - ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ -{ \ + ereg0, ebit0, ereg1, ebit1) \ .desc = { \ .name = "REG-" #_id, \ .ops = &tps6586x_regulator_##_ops, \ @@ -248,18 +247,26 @@ static int tps6586x_dvm_voltages[] = { .enable_bit[0] = (ebit0), \ .enable_reg[1] = TPS6586X_SUPPLY##ereg1, \ .enable_bit[1] = (ebit1), \ - .voltages = tps6586x_##vdata##_voltages, \ -} + .voltages = tps6586x_##vdata##_voltages, + +#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ + .go_reg = TPS6586X_##goreg, \ + .go_bit = (gobit), #define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ +{ \ TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \ - ereg0, ebit0, ereg1, ebit1, 0, 0) + ereg0, ebit0, ereg1, ebit1) \ +} #define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ +{ \ TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \ - ereg0, ebit0, ereg1, ebit1, goreg, gobit) + ereg0, ebit0, ereg1, ebit1) \ + TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ +} static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0), @@ -267,11 +274,11 @@ static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), - TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6), + TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), - TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7), + TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), - TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1), + TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6), TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6), @@ -290,6 +297,10 @@ static inline int tps6586x_regulator_preinit(struct device *parent, uint8_t val1, val2; int ret; + if (ri->enable_reg[0] == ri->enable_reg[1] && + ri->enable_bit[0] == ri->enable_bit[1]) + return 0; + ret = tps6586x_read(parent, ri->enable_reg[0], &val1); if (ret) return ret; @@ -298,14 +309,14 @@ static inline int tps6586x_regulator_preinit(struct device *parent, if (ret) return ret; - if (!(val2 & ri->enable_bit[1])) + if (!(val2 & (1 << ri->enable_bit[1]))) return 0; /* * The regulator is on, but it's enabled with the bit we don't * want to use, so we switch the enable bits */ - if (!(val1 & ri->enable_bit[0])) { + if (!(val1 & (1 << ri->enable_bit[0]))) { ret = tps6586x_set_bits(parent, ri->enable_reg[0], 1 << ri->enable_bit[0]); if (ret) diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index a5050e217150..825951b6b83f 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -635,7 +635,7 @@ static void css_process_crw(struct crw *crw0, struct crw *crw1, int overflow) init_subchannel_id(&mchk_schid); mchk_schid.sch_no = crw0->rsid; if (crw1) - mchk_schid.ssid = (crw1->rsid >> 8) & 3; + mchk_schid.ssid = (crw1->rsid >> 4) & 3; /* * Since we are always presented with IPI in the CRW, we have to |