summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/libahci.c2
-rw-r--r--drivers/ata/libata-core.c6
-rw-r--r--drivers/ata/libata-scsi.c6
-rw-r--r--drivers/ata/pata_marvell.c3
-rw-r--r--drivers/ata/sata_dwc_460ex.c2
-rw-r--r--drivers/base/platform.c2
-rw-r--r--drivers/base/power/clock_ops.c4
-rw-r--r--drivers/base/power/main.c28
-rw-r--r--drivers/connector/connector.c1
-rw-r--r--drivers/crypto/caam/caamalg.c6
-rw-r--r--drivers/firmware/google/Kconfig1
-rw-r--r--drivers/gpu/drm/drm_gem.c1
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c3
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c3
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h3
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c52
-rw-r--r--drivers/gpu/drm/i915/i915_gem_execbuffer.c4
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c1
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h1
-rw-r--r--drivers/gpu/drm/i915/i915_suspend.c5
-rw-r--r--drivers/gpu/drm/i915/intel_display.c308
-rw-r--r--drivers/gpu/drm/i915/intel_overlay.c5
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon_atombios.c36
-rw-r--r--drivers/gpu/drm/radeon/radeon_bios.c2
-rw-r--r--drivers/gpu/drm/ttm/ttm_tt.c5
-rw-r--r--drivers/hid/hid-core.c1
-rw-r--r--drivers/hid/hid-ids.h1
-rw-r--r--drivers/hid/hid-multitouch.c12
-rw-r--r--drivers/i2c/busses/i2c-taos-evm.c8
-rw-r--r--drivers/i2c/muxes/pca954x.c7
-rw-r--r--drivers/infiniband/hw/cxgb4/cm.c46
-rw-r--r--drivers/infiniband/hw/cxgb4/cq.c4
-rw-r--r--drivers/infiniband/hw/cxgb4/mem.c2
-rw-r--r--drivers/infiniband/hw/cxgb4/qp.c5
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7322.c25
-rw-r--r--drivers/infiniband/hw/qib/qib_intr.c6
-rw-r--r--drivers/leds/leds-lp5521.c4
-rw-r--r--drivers/leds/leds-lp5523.c4
-rw-r--r--drivers/md/md.c1
-rw-r--r--drivers/misc/cb710/sgbuf2.c2
-rw-r--r--drivers/misc/ioc4.c2
-rw-r--r--drivers/misc/lkdtm.c8
-rw-r--r--drivers/misc/pti.c11
-rw-r--r--drivers/misc/ti-st/st_core.c2
-rw-r--r--drivers/misc/ti-st/st_kim.c8
-rw-r--r--drivers/mmc/card/block.c5
-rw-r--r--drivers/mmc/card/queue.c15
-rw-r--r--drivers/mmc/card/queue.h3
-rw-r--r--drivers/mmc/core/core.c2
-rw-r--r--drivers/mmc/core/sdio.c39
-rw-r--r--drivers/mmc/core/sdio_bus.c2
-rw-r--r--drivers/mmc/host/of_mmc_spi.c5
-rw-r--r--drivers/mmc/host/omap_hsmmc.c6
-rw-r--r--drivers/mmc/host/sh_mobile_sdhi.c5
-rw-r--r--drivers/mmc/host/tmio_mmc_pio.c4
-rw-r--r--drivers/mmc/host/vub300.c11
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c6
-rw-r--r--drivers/net/8139too.c1
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/bna/bnad.c7
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c6
-rw-r--r--drivers/net/can/Kconfig4
-rw-r--r--drivers/net/cxgb3/sge.c4
-rw-r--r--drivers/net/greth.c7
-rw-r--r--drivers/net/hamradio/6pack.c4
-rw-r--r--drivers/net/hamradio/mkiss.c4
-rw-r--r--drivers/net/natsemi.c3
-rw-r--r--drivers/net/ppp_deflate.c5
-rw-r--r--drivers/net/qlge/qlge.h3
-rw-r--r--drivers/net/qlge/qlge_main.c40
-rw-r--r--drivers/net/r8169.c2
-rw-r--r--drivers/net/rionet.c28
-rw-r--r--drivers/net/usb/kalmia.c42
-rw-r--r--drivers/net/usb/zaurus.c10
-rw-r--r--drivers/net/vmxnet3/vmxnet3_drv.c135
-rw-r--r--drivers/net/vmxnet3/vmxnet3_int.h4
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c6
-rw-r--r--drivers/pci/pci-driver.c4
-rw-r--r--drivers/pci/pci.c2
-rw-r--r--drivers/pci/probe.c2
-rw-r--r--drivers/pci/quirks.c2
-rw-r--r--drivers/rtc/rtc-ds1307.c1
-rw-r--r--drivers/rtc/rtc-vt8500.c45
-rw-r--r--drivers/staging/brcm80211/Kconfig2
-rw-r--r--drivers/staging/comedi/Kconfig22
-rw-r--r--drivers/staging/iio/Kconfig2
-rw-r--r--drivers/staging/iio/accel/adis16204.h2
-rw-r--r--drivers/staging/iio/accel/adis16209.h4
-rw-r--r--drivers/staging/iio/gyro/adis16260.h2
-rw-r--r--drivers/staging/iio/imu/adis16400.h2
-rw-r--r--drivers/staging/mei/init.c2
-rw-r--r--drivers/staging/mei/wd.c13
-rw-r--r--drivers/target/loopback/tcm_loop.c13
-rw-r--r--drivers/target/target_core_configfs.c24
-rw-r--r--drivers/target/target_core_device.c5
-rw-r--r--drivers/target/target_core_pr.c6
-rw-r--r--drivers/target/target_core_tmr.c8
-rw-r--r--drivers/target/target_core_transport.c6
-rw-r--r--drivers/target/tcm_fc/tcm_fc.h2
-rw-r--r--drivers/target/tcm_fc/tfc_cmd.c64
-rw-r--r--drivers/target/tcm_fc/tfc_io.c2
-rw-r--r--drivers/target/tcm_fc/tfc_sess.c4
-rw-r--r--drivers/tty/n_gsm.c26
-rw-r--r--drivers/tty/n_tty.c1
-rw-r--r--drivers/tty/serial/8250.c1
-rw-r--r--drivers/tty/serial/8250_pci.c61
-rw-r--r--drivers/tty/serial/amba-pl011.c123
-rw-r--r--drivers/tty/serial/bcm63xx_uart.c18
-rw-r--r--drivers/tty/serial/jsm/jsm_driver.c2
-rw-r--r--drivers/tty/serial/mrst_max3110.c5
-rw-r--r--drivers/tty/serial/s5pv210.c4
-rw-r--r--drivers/tty/tty_ldisc.c4
-rw-r--r--drivers/usb/core/driver.c17
-rw-r--r--drivers/usb/core/hub.c16
-rw-r--r--drivers/usb/core/message.c15
-rw-r--r--drivers/usb/host/ehci-ath79.c10
-rw-r--r--drivers/usb/host/ehci-hcd.c4
-rw-r--r--drivers/usb/host/isp1760-hcd.c2
-rw-r--r--drivers/usb/host/ohci-hcd.c4
-rw-r--r--drivers/usb/host/r8a66597-hcd.c1
-rw-r--r--drivers/usb/host/xhci-mem.c2
-rw-r--r--drivers/usb/host/xhci-pci.c8
-rw-r--r--drivers/usb/host/xhci-ring.c30
-rw-r--r--drivers/usb/host/xhci.c39
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/musb/musb_gadget.c6
-rw-r--r--drivers/usb/musb/musb_host.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c19
-rw-r--r--drivers/usb/serial/ftdi_sio.h3
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h1
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c1
-rw-r--r--drivers/watchdog/Kconfig3
-rw-r--r--drivers/watchdog/at32ap700x_wdt.c2
-rw-r--r--drivers/watchdog/gef_wdt.c2
-rw-r--r--drivers/watchdog/intel_scu_watchdog.c1
-rw-r--r--drivers/watchdog/mtx-1_wdt.c29
-rw-r--r--drivers/watchdog/wm831x_wdt.c5
140 files changed, 1255 insertions, 539 deletions
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index d38c40fe4ddb..41223c7f0206 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -452,7 +452,7 @@ void ahci_save_initial_config(struct device *dev,
}
if (mask_port_map) {
- dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
+ dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n",
port_map,
port_map & mask_port_map);
port_map &= mask_port_map;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 736bee5dafeb..000d03ae6653 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4143,9 +4143,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
* Devices which choke on SETXFER. Applies only if both the
* device and controller are SATA.
*/
- { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
- { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER },
- { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
/* End Marker */
{ }
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d51f9795c064..927f968e99d9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
*/
int ata_sas_port_start(struct ata_port *ap)
{
+ /*
+ * the port is marked as frozen at allocation time, but if we don't
+ * have new eh, we won't thaw it
+ */
+ if (!ap->ops->error_handler)
+ ap->pflags &= ~ATA_PFLAG_FROZEN;
return 0;
}
EXPORT_SYMBOL_GPL(ata_sas_port_start);
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 75a6a0c0094f..5d7f58a7e34d 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -161,6 +161,9 @@ static const struct pci_device_id marvell_pci_tbl[] = {
{ PCI_DEVICE(0x11AB, 0x6121), },
{ PCI_DEVICE(0x11AB, 0x6123), },
{ PCI_DEVICE(0x11AB, 0x6145), },
+ { PCI_DEVICE(0x1B4B, 0x91A0), },
+ { PCI_DEVICE(0x1B4B, 0x91A4), },
+
{ } /* terminate list */
};
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 1c4b3aa4c7c4..dc88a39e7db8 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf)
/*
* Function: get_burst_length_encode
* arguments: datalength: length in bytes of data
- * returns value to be programmed in register corrresponding to data length
+ * returns value to be programmed in register corresponding to data length
* This value is effectively the log(base 2) of the length
*/
static int get_burst_length_encode(int datalength)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 1c291af637b3..6040717b62bb 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -367,7 +367,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister);
*
* Returns &struct platform_device pointer on success, or ERR_PTR() on error.
*/
-struct platform_device *__init_or_module platform_device_register_resndata(
+struct platform_device *platform_device_register_resndata(
struct device *parent,
const char *name, int id,
const struct resource *res, unsigned int num,
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index eaa8a854af03..ad367c4139b1 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -387,7 +387,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
clknb = container_of(nb, struct pm_clk_notifier_block, nb);
switch (action) {
- case BUS_NOTIFY_ADD_DEVICE:
+ case BUS_NOTIFY_BIND_DRIVER:
if (clknb->con_ids[0]) {
for (con_id = clknb->con_ids; *con_id; con_id++)
enable_clock(dev, *con_id);
@@ -395,7 +395,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
enable_clock(dev, NULL);
}
break;
- case BUS_NOTIFY_DEL_DEVICE:
+ case BUS_NOTIFY_UNBOUND_DRIVER:
if (clknb->con_ids[0]) {
for (con_id = clknb->con_ids; *con_id; con_id++)
disable_clock(dev, *con_id);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index aa6320207745..06f09bf89cb2 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -57,7 +57,8 @@ static int async_error;
*/
void device_pm_init(struct device *dev)
{
- dev->power.in_suspend = false;
+ dev->power.is_prepared = false;
+ dev->power.is_suspended = false;
init_completion(&dev->power.completion);
complete_all(&dev->power.completion);
dev->power.wakeup = NULL;
@@ -91,7 +92,7 @@ void device_pm_add(struct device *dev)
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
mutex_lock(&dpm_list_mtx);
- if (dev->parent && dev->parent->power.in_suspend)
+ if (dev->parent && dev->parent->power.is_prepared)
dev_warn(dev, "parent %s should not be sleeping\n",
dev_name(dev->parent));
list_add_tail(&dev->power.entry, &dpm_list);
@@ -511,7 +512,14 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
dpm_wait(dev->parent, async);
device_lock(dev);
- dev->power.in_suspend = false;
+ /*
+ * This is a fib. But we'll allow new children to be added below
+ * a resumed device, even if the device hasn't been completed yet.
+ */
+ dev->power.is_prepared = false;
+
+ if (!dev->power.is_suspended)
+ goto Unlock;
if (dev->pwr_domain) {
pm_dev_dbg(dev, state, "power domain ");
@@ -548,6 +556,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
}
End:
+ dev->power.is_suspended = false;
+
+ Unlock:
device_unlock(dev);
complete_all(&dev->power.completion);
@@ -670,7 +681,7 @@ void dpm_complete(pm_message_t state)
struct device *dev = to_device(dpm_prepared_list.prev);
get_device(dev);
- dev->power.in_suspend = false;
+ dev->power.is_prepared = false;
list_move(&dev->power.entry, &list);
mutex_unlock(&dpm_list_mtx);
@@ -835,11 +846,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
device_lock(dev);
if (async_error)
- goto End;
+ goto Unlock;
if (pm_wakeup_pending()) {
async_error = -EBUSY;
- goto End;
+ goto Unlock;
}
if (dev->pwr_domain) {
@@ -877,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
}
End:
+ dev->power.is_suspended = !error;
+
+ Unlock:
device_unlock(dev);
complete_all(&dev->power.completion);
@@ -1042,7 +1056,7 @@ int dpm_prepare(pm_message_t state)
put_device(dev);
break;
}
- dev->power.in_suspend = true;
+ dev->power.is_prepared = true;
if (!list_empty(&dev->power.entry))
list_move_tail(&dev->power.entry, &dpm_prepared_list);
put_device(dev);
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 219d88a0eeae..dde6a0fad408 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -139,6 +139,7 @@ static int cn_call_callback(struct sk_buff *skb)
spin_unlock_bh(&dev->cbdev->queue_lock);
if (cbq != NULL) {
+ err = 0;
cbq->callback(msg, nsp);
kfree_skb(skb);
cn_queue_release_callback(cbq);
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index d0e65d6ddc77..676d957c22b0 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -238,9 +238,9 @@ static int build_sh_desc_ipsec(struct caam_ctx *ctx)
/* build shared descriptor for this session */
sh_desc = kmalloc(CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN +
- keys_fit_inline ?
- ctx->split_key_pad_len + ctx->enckeylen :
- CAAM_PTR_SZ * 2, GFP_DMA | GFP_KERNEL);
+ (keys_fit_inline ?
+ ctx->split_key_pad_len + ctx->enckeylen :
+ CAAM_PTR_SZ * 2), GFP_DMA | GFP_KERNEL);
if (!sh_desc) {
dev_err(jrdev, "could not allocate shared descriptor\n");
return -ENOMEM;
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
index 87096b6ca5c9..2f21b0bfe653 100644
--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -13,6 +13,7 @@ menu "Google Firmware Drivers"
config GOOGLE_SMI
tristate "SMI interface for Google platforms"
depends on ACPI && DMI
+ select EFI
select EFI_VARS
help
Say Y here if you want to enable SMI callbacks for Google
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 74e4ff578017..4012fe423460 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -34,6 +34,7 @@
#include <linux/module.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
#include "drmP.h"
/** @file drm_gem.c
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0239e9974bf2..2b79588541e7 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -2182,9 +2182,8 @@ int i915_driver_unload(struct drm_device *dev)
/* Flush any outstanding unpin_work. */
flush_workqueue(dev_priv->wq);
- i915_gem_free_all_phys_object(dev);
-
mutex_lock(&dev->struct_mutex);
+ i915_gem_free_all_phys_object(dev);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
if (I915_HAS_FBC(dev) && i915_powersave)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0defd4270594..609358faaa90 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -579,6 +579,9 @@ int i915_reset(struct drm_device *dev, u8 flags)
} else switch (INTEL_INFO(dev)->gen) {
case 6:
ret = gen6_do_reset(dev, flags);
+ /* If reset with a user forcewake, try to restore */
+ if (atomic_read(&dev_priv->forcewake_count))
+ __gen6_gt_force_wake_get(dev_priv);
break;
case 5:
ret = ironlake_do_reset(dev, flags);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f63ee162f124..eddabf68e97a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -211,6 +211,9 @@ struct drm_i915_display_funcs {
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
void (*init_pch_clock_gating)(struct drm_device *dev);
+ int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj);
/* clock updates for mode set */
/* cursor updates */
/* render clock increase/decrease */
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 94c84d744100..5c0d1247f453 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -31,6 +31,7 @@
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
+#include <linux/shmem_fs.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/pci.h>
@@ -359,8 +360,7 @@ i915_gem_shmem_pread_fast(struct drm_device *dev,
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page))
return PTR_ERR(page);
@@ -463,8 +463,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev,
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
@@ -797,8 +796,7 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev,
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page))
return PTR_ERR(page);
@@ -907,8 +905,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev,
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
@@ -1219,11 +1216,11 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
ret = i915_gem_object_bind_to_gtt(obj, 0, true);
if (ret)
goto unlock;
- }
- ret = i915_gem_object_set_to_gtt_domain(obj, write);
- if (ret)
- goto unlock;
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret)
+ goto unlock;
+ }
if (obj->tiling_mode == I915_TILING_NONE)
ret = i915_gem_object_put_fence(obj);
@@ -1558,12 +1555,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj,
inode = obj->base.filp->f_path.dentry->d_inode;
mapping = inode->i_mapping;
+ gfpmask |= mapping_gfp_mask(mapping);
+
for (i = 0; i < page_count; i++) {
- page = read_cache_page_gfp(mapping, i,
- GFP_HIGHUSER |
- __GFP_COLD |
- __GFP_RECLAIMABLE |
- gfpmask);
+ page = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
if (IS_ERR(page))
goto err_pages;
@@ -1701,13 +1696,10 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj)
/* Our goal here is to return as much of the memory as
* is possible back to the system as we are called from OOM.
* To do this we must instruct the shmfs to drop all of its
- * backing pages, *now*. Here we mirror the actions taken
- * when by shmem_delete_inode() to release the backing store.
+ * backing pages, *now*.
*/
inode = obj->base.filp->f_path.dentry->d_inode;
- truncate_inode_pages(inode->i_mapping, 0);
- if (inode->i_op->truncate_range)
- inode->i_op->truncate_range(inode, 0, (loff_t)-1);
+ shmem_truncate_range(inode, 0, (loff_t)-1);
obj->madv = __I915_MADV_PURGED;
}
@@ -2080,8 +2072,8 @@ i915_wait_request(struct intel_ring_buffer *ring,
if (!ier) {
DRM_ERROR("something (likely vbetool) disabled "
"interrupts, re-enabling\n");
- i915_driver_irq_preinstall(ring->dev);
- i915_driver_irq_postinstall(ring->dev);
+ ring->dev->driver->irq_preinstall(ring->dev);
+ ring->dev->driver->irq_postinstall(ring->dev);
}
trace_i915_gem_request_wait_begin(ring, seqno);
@@ -2926,8 +2918,6 @@ i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj)
*/
wmb();
- i915_gem_release_mmap(obj);
-
old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
@@ -3567,6 +3557,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
+ struct address_space *mapping;
obj = kzalloc(sizeof(*obj), GFP_KERNEL);
if (obj == NULL)
@@ -3577,6 +3568,9 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
return NULL;
}
+ mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+ mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE);
+
i915_gem_info_add_obj(dev_priv, size);
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
@@ -3952,8 +3946,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev,
page_count = obj->base.size / PAGE_SIZE;
for (i = 0; i < page_count; i++) {
- struct page *page = read_cache_page_gfp(mapping, i,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ struct page *page = shmem_read_mapping_page(mapping, i);
if (!IS_ERR(page)) {
char *dst = kmap_atomic(page);
memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE);
@@ -4014,8 +4007,7 @@ i915_gem_attach_phys_object(struct drm_device *dev,
struct page *page;
char *dst, *src;
- page = read_cache_page_gfp(mapping, i,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, i);
if (IS_ERR(page))
return PTR_ERR(page);
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 20a4cc5b818f..4934cf84c320 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -187,10 +187,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_i915_gem_object *obj,
if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU)
i915_gem_clflush_object(obj);
- /* blow away mappings if mapped through GTT */
- if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_GTT)
- i915_gem_release_mmap(obj);
-
if (obj->base.pending_write_domain)
cd->flips |= atomic_read(&obj->pending_flip);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9e34a1abeb61..ae2b49969b99 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1749,6 +1749,7 @@ void ironlake_irq_preinstall(struct drm_device *dev)
* happens.
*/
I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT);
+ I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT);
}
/* XXX hotplug from PCH */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2f967af8e62e..5d5def756c9e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -531,6 +531,7 @@
#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0
#define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3)
+#define GEN6_BSD_HWSTAM 0x12098
#define GEN6_BSD_IMR 0x120a8
#define GEN6_BSD_USER_INTERRUPT (1 << 12)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 60a94d2b5264..e8152d23d5b6 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -678,6 +678,7 @@ void i915_save_display(struct drm_device *dev)
}
/* VGA state */
+ mutex_lock(&dev->struct_mutex);
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
@@ -687,6 +688,7 @@ void i915_save_display(struct drm_device *dev)
dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
i915_save_vga(dev);
+ mutex_unlock(&dev->struct_mutex);
}
void i915_restore_display(struct drm_device *dev)
@@ -780,6 +782,8 @@ void i915_restore_display(struct drm_device *dev)
I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
else
I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+
+ mutex_lock(&dev->struct_mutex);
I915_WRITE(VGA0, dev_priv->saveVGA0);
I915_WRITE(VGA1, dev_priv->saveVGA1);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
@@ -787,6 +791,7 @@ void i915_restore_display(struct drm_device *dev)
udelay(150);
i915_restore_vga(dev);
+ mutex_unlock(&dev->struct_mutex);
}
int i915_save_state(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 81a9059b6a94..21b6f93fe919 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4687,6 +4687,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
+ intel_enable_plane(dev_priv, plane, pipe);
ret = intel_pipe_set_base(crtc, x, y, old_fb);
@@ -5217,8 +5218,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
- if (!HAS_PCH_SPLIT(dev))
- intel_enable_plane(dev_priv, plane, pipe);
ret = intel_pipe_set_base(crtc, x, y, old_fb);
@@ -6262,6 +6261,197 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane)
spin_unlock_irqrestore(&dev->event_lock, flags);
}
+static int intel_gen2_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ unsigned long offset;
+ u32 flip_mask;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ /* Offset into the new buffer for cases of shared fbs between CRTCs */
+ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
+
+ ret = BEGIN_LP_RING(6);
+ if (ret)
+ goto out;
+
+ /* Can't queue multiple flips, so wait for the previous
+ * one to finish before executing the next.
+ */
+ if (intel_crtc->plane)
+ flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+ else
+ flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+ OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+ OUT_RING(MI_NOOP);
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(obj->gtt_offset + offset);
+ OUT_RING(MI_NOOP);
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+static int intel_gen3_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ unsigned long offset;
+ u32 flip_mask;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ /* Offset into the new buffer for cases of shared fbs between CRTCs */
+ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
+
+ ret = BEGIN_LP_RING(6);
+ if (ret)
+ goto out;
+
+ if (intel_crtc->plane)
+ flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+ else
+ flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+ OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+ OUT_RING(MI_NOOP);
+ OUT_RING(MI_DISPLAY_FLIP_I915 |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(obj->gtt_offset + offset);
+ OUT_RING(MI_NOOP);
+
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+static int intel_gen4_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pf, pipesrc;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ ret = BEGIN_LP_RING(4);
+ if (ret)
+ goto out;
+
+ /* i965+ uses the linear or tiled offsets from the
+ * Display Registers (which do not change across a page-flip)
+ * so we need only reprogram the base address.
+ */
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(obj->gtt_offset | obj->tiling_mode);
+
+ /* XXX Enabling the panel-fitter across page-flip is so far
+ * untested on non-native modes, so ignore it for now.
+ * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
+ */
+ pf = 0;
+ pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+ OUT_RING(pf | pipesrc);
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+static int intel_gen6_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pf, pipesrc;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ ret = BEGIN_LP_RING(4);
+ if (ret)
+ goto out;
+
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch | obj->tiling_mode);
+ OUT_RING(obj->gtt_offset);
+
+ pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
+ pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+ OUT_RING(pf | pipesrc);
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+/*
+ * On gen7 we currently use the blit ring because (in early silicon at least)
+ * the render ring doesn't give us interrpts for page flip completion, which
+ * means clients will hang after the first flip is queued. Fortunately the
+ * blit ring generates interrupts properly, so use it instead.
+ */
+static int intel_gen7_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
+ if (ret)
+ goto out;
+
+ ret = intel_ring_begin(ring, 4);
+ if (ret)
+ goto out;
+
+ intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+ intel_ring_emit(ring, (fb->pitch | obj->tiling_mode));
+ intel_ring_emit(ring, (obj->gtt_offset));
+ intel_ring_emit(ring, (MI_NOOP));
+ intel_ring_advance(ring);
+out:
+ return ret;
+}
+
+static int intel_default_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ return -ENODEV;
+}
+
static int intel_crtc_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event)
@@ -6272,9 +6462,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
struct drm_i915_gem_object *obj;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
- unsigned long flags, offset;
- int pipe = intel_crtc->pipe;
- u32 pf, pipesrc;
+ unsigned long flags;
int ret;
work = kzalloc(sizeof *work, GFP_KERNEL);
@@ -6303,9 +6491,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
obj = intel_fb->obj;
mutex_lock(&dev->struct_mutex);
- ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
- if (ret)
- goto cleanup_work;
/* Reference the objects for the scheduled work. */
drm_gem_object_reference(&work->old_fb_obj->base);
@@ -6317,91 +6502,18 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
if (ret)
goto cleanup_objs;
- if (IS_GEN3(dev) || IS_GEN2(dev)) {
- u32 flip_mask;
-
- /* Can't queue multiple flips, so wait for the previous
- * one to finish before executing the next.
- */
- ret = BEGIN_LP_RING(2);
- if (ret)
- goto cleanup_objs;
-
- if (intel_crtc->plane)
- flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
- else
- flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
- OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
- OUT_RING(MI_NOOP);
- ADVANCE_LP_RING();
- }
-
work->pending_flip_obj = obj;
work->enable_stall_check = true;
- /* Offset into the new buffer for cases of shared fbs between CRTCs */
- offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
-
- ret = BEGIN_LP_RING(4);
- if (ret)
- goto cleanup_objs;
-
/* Block clients from rendering to the new back buffer until
* the flip occurs and the object is no longer visible.
*/
atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
- switch (INTEL_INFO(dev)->gen) {
- case 2:
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
- OUT_RING(obj->gtt_offset + offset);
- OUT_RING(MI_NOOP);
- break;
-
- case 3:
- OUT_RING(MI_DISPLAY_FLIP_I915 |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
- OUT_RING(obj->gtt_offset + offset);
- OUT_RING(MI_NOOP);
- break;
-
- case 4:
- case 5:
- /* i965+ uses the linear or tiled offsets from the
- * Display Registers (which do not change across a page-flip)
- * so we need only reprogram the base address.
- */
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
- OUT_RING(obj->gtt_offset | obj->tiling_mode);
-
- /* XXX Enabling the panel-fitter across page-flip is so far
- * untested on non-native modes, so ignore it for now.
- * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
- */
- pf = 0;
- pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff;
- OUT_RING(pf | pipesrc);
- break;
-
- case 6:
- case 7:
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch | obj->tiling_mode);
- OUT_RING(obj->gtt_offset);
-
- pf = I915_READ(PF_CTL(pipe)) & PF_ENABLE;
- pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff;
- OUT_RING(pf | pipesrc);
- break;
- }
- ADVANCE_LP_RING();
+ ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
+ if (ret)
+ goto cleanup_pending;
mutex_unlock(&dev->struct_mutex);
@@ -6409,10 +6521,11 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
return 0;
+cleanup_pending:
+ atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
cleanup_objs:
drm_gem_object_unreference(&work->old_fb_obj->base);
drm_gem_object_unreference(&obj->base);
-cleanup_work:
mutex_unlock(&dev->struct_mutex);
spin_lock_irqsave(&dev->event_lock, flags);
@@ -7657,6 +7770,31 @@ static void intel_init_display(struct drm_device *dev)
else
dev_priv->display.get_fifo_size = i830_get_fifo_size;
}
+
+ /* Default just returns -ENODEV to indicate unsupported */
+ dev_priv->display.queue_flip = intel_default_queue_flip;
+
+ switch (INTEL_INFO(dev)->gen) {
+ case 2:
+ dev_priv->display.queue_flip = intel_gen2_queue_flip;
+ break;
+
+ case 3:
+ dev_priv->display.queue_flip = intel_gen3_queue_flip;
+ break;
+
+ case 4:
+ case 5:
+ dev_priv->display.queue_flip = intel_gen4_queue_flip;
+ break;
+
+ case 6:
+ dev_priv->display.queue_flip = intel_gen6_queue_flip;
+ break;
+ case 7:
+ dev_priv->display.queue_flip = intel_gen7_queue_flip;
+ break;
+ }
}
/*
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index a670c006982e..56a8e2aea19c 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -1416,6 +1416,8 @@ void intel_setup_overlay(struct drm_device *dev)
goto out_free;
overlay->reg_bo = reg_bo;
+ mutex_lock(&dev->struct_mutex);
+
if (OVERLAY_NEEDS_PHYSICAL(dev)) {
ret = i915_gem_attach_phys_object(dev, reg_bo,
I915_GEM_PHYS_OVERLAY_REGS,
@@ -1440,6 +1442,8 @@ void intel_setup_overlay(struct drm_device *dev)
}
}
+ mutex_unlock(&dev->struct_mutex);
+
/* init all values */
overlay->color_key = 0x0101fe;
overlay->brightness = -19;
@@ -1464,6 +1468,7 @@ out_unpin_bo:
i915_gem_object_unpin(reg_bo);
out_free_bo:
drm_gem_object_unreference(&reg_bo->base);
+ mutex_unlock(&dev->struct_mutex);
out_free:
kfree(overlay);
return;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 445af7981637..12d2fdc52414 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2013,9 +2013,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
rdev->config.evergreen.tile_config |= (3 << 0);
break;
}
- /* num banks is 8 on all fusion asics */
+ /* num banks is 8 on all fusion asics. 0 = 4, 1 = 8, 2 = 16 */
if (rdev->flags & RADEON_IS_IGP)
- rdev->config.evergreen.tile_config |= 8 << 4;
+ rdev->config.evergreen.tile_config |= 1 << 4;
else
rdev->config.evergreen.tile_config |=
((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 27f45579e64b..ef0e0e016914 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -179,6 +179,7 @@ void radeon_pm_resume(struct radeon_device *rdev);
void radeon_combios_get_power_modes(struct radeon_device *rdev);
void radeon_atombios_get_power_modes(struct radeon_device *rdev);
void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type);
+int radeon_atom_get_max_vddc(struct radeon_device *rdev, u16 *voltage);
void rs690_pm_info(struct radeon_device *rdev);
extern int rv6xx_get_temp(struct radeon_device *rdev);
extern int rv770_get_temp(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 1e725d9f767f..bf2b61584cdb 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2320,6 +2320,14 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev,
le16_to_cpu(clock_info->r600.usVDDC);
}
+ /* patch up vddc if necessary */
+ if (rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage == 0xff01) {
+ u16 vddc;
+
+ if (radeon_atom_get_max_vddc(rdev, &vddc) == 0)
+ rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = vddc;
+ }
+
if (rdev->flags & RADEON_IS_IGP) {
/* skip invalid modes */
if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
@@ -2630,7 +2638,35 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+int radeon_atom_get_max_vddc(struct radeon_device *rdev,
+ u16 *voltage)
+{
+ union set_voltage args;
+ int index = GetIndexIntoMasterTable(COMMAND, SetVoltage);
+ u8 frev, crev;
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return -EINVAL;
+
+ switch (crev) {
+ case 1:
+ return -EINVAL;
+ case 2:
+ args.v2.ucVoltageType = SET_VOLTAGE_GET_MAX_VOLTAGE;
+ args.v2.ucVoltageMode = 0;
+ args.v2.usVoltageLevel = 0;
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ *voltage = le16_to_cpu(args.v2.usVoltageLevel);
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ return -EINVAL;
+ }
+ return 0;
+}
void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 1aba85cad1a8..3fc5fa1aefd0 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -104,7 +104,7 @@ static bool radeon_read_bios(struct radeon_device *rdev)
static bool radeon_atrm_get_bios(struct radeon_device *rdev)
{
int ret;
- int size = 64 * 1024;
+ int size = 256 * 1024;
int i;
if (!radeon_atrm_supported(rdev->pdev))
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 90e23e0bfadb..58c271ebc0f7 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -31,6 +31,7 @@
#include <linux/sched.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
#include <linux/file.h>
#include <linux/swap.h>
#include <linux/slab.h>
@@ -484,7 +485,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
for (i = 0; i < ttm->num_pages; ++i) {
- from_page = read_mapping_page(swap_space, i, NULL);
+ from_page = shmem_read_mapping_page(swap_space, i);
if (IS_ERR(from_page)) {
ret = PTR_ERR(from_page);
goto out_err;
@@ -557,7 +558,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage)
from_page = ttm->pages[i];
if (unlikely(from_page == NULL))
continue;
- to_page = read_mapping_page(swap_space, i, NULL);
+ to_page = shmem_read_mapping_page(swap_space, i);
if (unlikely(IS_ERR(to_page))) {
ret = PTR_ERR(to_page);
goto out_err;
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index f7440e8ce3e7..6f3289a57888 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1423,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index aecb5a4b8d6d..a756ee6c7df5 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -449,6 +449,7 @@
#define USB_VENDOR_ID_LUMIO 0x202e
#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
+#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 0b2dcd0ee591..62cac4dc3b62 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -271,6 +271,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
}
return 1;
case HID_DG_CONTACTID:
+ if (!td->maxcontacts)
+ td->maxcontacts = MT_DEFAULT_MAXCONTACT;
input_mt_init_slots(hi->input, td->maxcontacts);
td->last_slot_field = usage->hid;
td->last_field_index = field->index;
@@ -547,9 +549,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (ret)
goto fail;
- if (!td->maxcontacts)
- td->maxcontacts = MT_DEFAULT_MAXCONTACT;
-
td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
GFP_KERNEL);
if (!td->slots) {
@@ -677,6 +676,9 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
USB_DEVICE_ID_CRYSTALTOUCH) },
+ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
+ USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
/* MosArt panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
@@ -707,10 +709,10 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
USB_DEVICE_ID_MTP)},
{ .driver_data = MT_CLS_CONFIDENCE,
- HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
USB_DEVICE_ID_MTP_STM)},
{ .driver_data = MT_CLS_CONFIDENCE,
- HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
USB_DEVICE_ID_MTP_SITRONIX)},
/* Touch International panels */
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index dd39c1eb03ed..26c352a09298 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -234,7 +234,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv)
if (taos->state != TAOS_STATE_IDLE) {
err = -ENODEV;
- dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, "
+ dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, "
"pos=%d)\n", taos->state, taos->pos);
goto exit_close;
}
@@ -255,7 +255,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv)
msecs_to_jiffies(250));
if (taos->state != TAOS_STATE_IDLE) {
err = -ENODEV;
- dev_err(&adapter->dev, "Echo off failed "
+ dev_err(&serio->dev, "TAOS EVM echo off failed "
"(state=%d)\n", taos->state);
goto exit_close;
}
@@ -263,7 +263,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv)
err = i2c_add_adapter(adapter);
if (err)
goto exit_close;
- dev_dbg(&serio->dev, "Connected to TAOS EVM\n");
+ dev_info(&serio->dev, "Connected to TAOS EVM\n");
taos->client = taos_instantiate_device(adapter);
return 0;
@@ -288,7 +288,7 @@ static void taos_disconnect(struct serio *serio)
serio_set_drvdata(serio, NULL);
kfree(taos);
- dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n");
+ dev_info(&serio->dev, "Disconnected from TAOS EVM\n");
}
static struct serio_device_id taos_serio_ids[] = {
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
index 54e1ce73534b..6f8953664636 100644
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/pca954x.c
@@ -201,10 +201,11 @@ static int pca954x_probe(struct i2c_client *client,
i2c_set_clientdata(client, data);
- /* Read the mux register at addr to verify
- * that the mux is in fact present.
+ /* Write the mux register at addr to verify
+ * that the mux is in fact present. This also
+ * initializes the mux to disconnected state.
*/
- if (i2c_smbus_read_byte(client) < 0) {
+ if (i2c_smbus_write_byte(client, 0) < 0) {
dev_warn(&client->dev, "probe failed\n");
goto exit_free;
}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index f660cd04ec2f..31fb44085c9b 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1463,9 +1463,9 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
struct c4iw_qp_attributes attrs;
int disconnect = 1;
int release = 0;
- int abort = 0;
struct tid_info *t = dev->rdev.lldi.tids;
unsigned int tid = GET_TID(hdr);
+ int ret;
ep = lookup_tid(t, tid);
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
@@ -1501,10 +1501,12 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
start_ep_timer(ep);
__state_set(&ep->com, CLOSING);
attrs.next_state = C4IW_QP_STATE_CLOSING;
- abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+ ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
- peer_close_upcall(ep);
- disconnect = 1;
+ if (ret != -ECONNRESET) {
+ peer_close_upcall(ep);
+ disconnect = 1;
+ }
break;
case ABORTING:
disconnect = 0;
@@ -2109,15 +2111,16 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
break;
}
- mutex_unlock(&ep->com.mutex);
if (close) {
- if (abrupt)
- ret = abort_connection(ep, NULL, gfp);
- else
+ if (abrupt) {
+ close_complete_upcall(ep);
+ ret = send_abort(ep, NULL, gfp);
+ } else
ret = send_halfclose(ep, gfp);
if (ret)
fatal = 1;
}
+ mutex_unlock(&ep->com.mutex);
if (fatal)
release_ep_resources(ep);
return ret;
@@ -2301,6 +2304,31 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb)
return 0;
}
+static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb)
+{
+ struct cpl_abort_req_rss *req = cplhdr(skb);
+ struct c4iw_ep *ep;
+ struct tid_info *t = dev->rdev.lldi.tids;
+ unsigned int tid = GET_TID(req);
+
+ ep = lookup_tid(t, tid);
+ if (is_neg_adv_abort(req->status)) {
+ PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep,
+ ep->hwtid);
+ kfree_skb(skb);
+ return 0;
+ }
+ PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
+ ep->com.state);
+
+ /*
+ * Wake up any threads in rdma_init() or rdma_fini().
+ */
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
+ sched(dev, skb);
+ return 0;
+}
+
/*
* Most upcalls from the T4 Core go to sched() to
* schedule the processing on a work queue.
@@ -2317,7 +2345,7 @@ c4iw_handler_func c4iw_handlers[NUM_CPL_CMDS] = {
[CPL_PASS_ESTABLISH] = sched,
[CPL_PEER_CLOSE] = sched,
[CPL_CLOSE_CON_RPL] = sched,
- [CPL_ABORT_REQ_RSS] = sched,
+ [CPL_ABORT_REQ_RSS] = peer_abort_intr,
[CPL_RDMA_TERMINATE] = sched,
[CPL_FW4_ACK] = sched,
[CPL_SET_TCB_RPL] = set_tcb_rpl,
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 8d8f8add6fcd..1720dc790d13 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -801,6 +801,10 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries,
if (ucontext) {
memsize = roundup(memsize, PAGE_SIZE);
hwentries = memsize / sizeof *chp->cq.queue;
+ while (hwentries > T4_MAX_IQ_SIZE) {
+ memsize -= PAGE_SIZE;
+ hwentries = memsize / sizeof *chp->cq.queue;
+ }
}
chp->cq.size = hwentries;
chp->cq.memsize = memsize;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 273ffe49525a..0347eed4a167 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -625,7 +625,7 @@ pbl_done:
mhp->attr.perms = c4iw_ib_to_tpt_access(acc);
mhp->attr.va_fbo = virt;
mhp->attr.page_size = shift - 12;
- mhp->attr.len = (u32) length;
+ mhp->attr.len = length;
err = register_mem(rhp, php, mhp, shift);
if (err)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 3b773b05a898..a41578e48c7b 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -1207,11 +1207,8 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
c4iw_get_ep(&qhp->ep->com);
}
ret = rdma_fini(rhp, qhp, ep);
- if (ret) {
- if (internal)
- c4iw_get_ep(&qhp->ep->com);
+ if (ret)
goto err;
- }
break;
case C4IW_QP_STATE_TERMINATE:
set_state(qhp, C4IW_QP_STATE_TERMINATE);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 9f53e68a096a..8ec5237031a0 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -469,6 +469,8 @@ static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
#define IB_7322_LT_STATE_RECOVERIDLE 0x0f
#define IB_7322_LT_STATE_CFGENH 0x10
#define IB_7322_LT_STATE_CFGTEST 0x11
+#define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12
+#define IB_7322_LT_STATE_CFGWAITENH 0x13
/* link state machine states from IBC */
#define IB_7322_L_STATE_DOWN 0x0
@@ -498,8 +500,10 @@ static const u8 qib_7322_physportstate[0x20] = {
IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
[IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
[IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH,
+ [IB_7322_LT_STATE_CFGWAITRMTTEST] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7322_LT_STATE_CFGWAITENH] =
+ IB_PHYSPORTSTATE_CFG_WAIT_ENH,
[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
@@ -1692,7 +1696,9 @@ static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst)
break;
}
- if (ibclt == IB_7322_LT_STATE_CFGTEST &&
+ if (((ibclt >= IB_7322_LT_STATE_CFGTEST &&
+ ibclt <= IB_7322_LT_STATE_CFGWAITENH) ||
+ ibclt == IB_7322_LT_STATE_LINKUP) &&
(ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
force_h1(ppd);
ppd->cpspec->qdr_reforce = 1;
@@ -7301,12 +7307,17 @@ static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data,
static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable)
{
u64 data = qib_read_kreg_port(ppd, krp_serdesctrl);
- printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n",
- ppd->dd->unit, ppd->port, (enable ? "on" : "off"));
- if (enable)
+ u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
+
+ if (enable && !state) {
+ printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n",
+ ppd->dd->unit, ppd->port);
data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
- else
+ } else if (!enable && state) {
+ printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n",
+ ppd->dd->unit, ppd->port);
data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
+ }
qib_write_kreg_port(ppd, krp_serdesctrl, data);
}
diff --git a/drivers/infiniband/hw/qib/qib_intr.c b/drivers/infiniband/hw/qib/qib_intr.c
index a693c56ec8a6..6ae57d23004a 100644
--- a/drivers/infiniband/hw/qib/qib_intr.c
+++ b/drivers/infiniband/hw/qib/qib_intr.c
@@ -96,8 +96,12 @@ void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs)
* states, or if it transitions from any of the up (INIT or better)
* states into any of the down states (except link recovery), then
* call the chip-specific code to take appropriate actions.
+ *
+ * ppd->lflags could be 0 if this is the first time the interrupt
+ * handlers has been called but the link is already up.
*/
- if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) &&
+ if (lstate >= IB_PORT_INIT &&
+ (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) &&
ltstate == IB_PHYSPORTSTATE_LINKUP) {
/* transitioned to UP */
if (dd->f_ib_updown(ppd, 1, ibcs))
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index c0cff64a1ae6..cc1dc4817fac 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -593,7 +593,7 @@ static void lp5521_unregister_sysfs(struct i2c_client *client)
&lp5521_led_attribute_group);
}
-static int __init lp5521_init_led(struct lp5521_led *led,
+static int __devinit lp5521_init_led(struct lp5521_led *led,
struct i2c_client *client,
int chan, struct lp5521_platform_data *pdata)
{
@@ -637,7 +637,7 @@ static int __init lp5521_init_led(struct lp5521_led *led,
return 0;
}
-static int lp5521_probe(struct i2c_client *client,
+static int __devinit lp5521_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp5521_chip *chip;
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index e19fed25f137..5971e309b234 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -826,7 +826,7 @@ static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
return 0;
}
-static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
int chan, struct lp5523_platform_data *pdata)
{
char name[32];
@@ -872,7 +872,7 @@ static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
static struct i2c_driver lp5523_driver;
-static int lp5523_probe(struct i2c_client *client,
+static int __devinit lp5523_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp5523_chip *chip;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4332fc2f25d4..91e31e260b4a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7088,6 +7088,7 @@ static int remove_and_add_spares(mddev_t *mddev)
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
+ !test_bit(Faulty, &rdev->flags) &&
!test_bit(Blocked, &rdev->flags))
spares++;
if (rdev->raid_disk < 0
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d019746551f3..2a40d0efdff5 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -47,7 +47,7 @@ static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
static inline bool needs_unaligned_copy(const void *ptr)
{
-#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
return false;
#else
return ((ptr - NULL) & 3) != 0;
diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 668d41e594a9..df03dd3bd0e2 100644
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -270,7 +270,7 @@ ioc4_variant(struct ioc4_driver_data *idd)
return IOC4_VARIANT_PCI_RT;
}
-static void __devinit
+static void
ioc4_load_modules(struct work_struct *work)
{
request_module("sgiioc4");
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 81d7fa4ec0db..150cd7061b80 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -120,6 +120,7 @@ static int recur_count = REC_NUM_DEFAULT;
static enum cname cpoint = CN_INVALID;
static enum ctype cptype = CT_NONE;
static int count = DEFAULT_COUNT;
+static DEFINE_SPINLOCK(count_lock);
module_param(recur_count, int, 0644);
MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
@@ -230,11 +231,14 @@ static const char *cp_name_to_str(enum cname name)
static int lkdtm_parse_commandline(void)
{
int i;
+ unsigned long flags;
if (cpoint_count < 1 || recur_count < 1)
return -EINVAL;
+ spin_lock_irqsave(&count_lock, flags);
count = cpoint_count;
+ spin_unlock_irqrestore(&count_lock, flags);
/* No special parameters */
if (!cpoint_type && !cpoint_name)
@@ -349,6 +353,9 @@ static void lkdtm_do_action(enum ctype which)
static void lkdtm_handler(void)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&count_lock, flags);
count--;
printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n",
cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
@@ -357,6 +364,7 @@ static void lkdtm_handler(void)
lkdtm_do_action(cptype);
count = cpoint_count;
}
+ spin_unlock_irqrestore(&count_lock, flags);
}
static int lkdtm_register_cpoint(enum cname which)
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index bb6f9255c17c..374dfcfccd07 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -317,7 +317,8 @@ EXPORT_SYMBOL_GPL(pti_request_masterchannel);
* a master, channel ID address
* used to write to PTI HW.
*
- * @mc: master, channel apeture ID address to be released.
+ * @mc: master, channel apeture ID address to be released. This
+ * will de-allocate the structure via kfree().
*/
void pti_release_masterchannel(struct pti_masterchannel *mc)
{
@@ -475,8 +476,10 @@ static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty)
else
pti_tty_data->mc = pti_request_masterchannel(2);
- if (pti_tty_data->mc == NULL)
+ if (pti_tty_data->mc == NULL) {
+ kfree(pti_tty_data);
return -ENXIO;
+ }
tty->driver_data = pti_tty_data;
}
@@ -495,7 +498,7 @@ static void pti_tty_cleanup(struct tty_struct *tty)
if (pti_tty_data == NULL)
return;
pti_release_masterchannel(pti_tty_data->mc);
- kfree(tty->driver_data);
+ kfree(pti_tty_data);
tty->driver_data = NULL;
}
@@ -581,7 +584,7 @@ static int pti_char_open(struct inode *inode, struct file *filp)
static int pti_char_release(struct inode *inode, struct file *filp)
{
pti_release_masterchannel(filp->private_data);
- kfree(filp->private_data);
+ filp->private_data = NULL;
return 0;
}
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f91f82eabda7..54c91ffe4a91 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -605,7 +605,7 @@ long st_unregister(struct st_proto_s *proto)
pr_debug("%s: %d ", __func__, proto->chnl_id);
st_kim_ref(&st_gdata, 0);
- if (proto->chnl_id >= ST_MAX_CHANNELS) {
+ if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) {
pr_err(" chnl_id %d not supported", proto->chnl_id);
return -EPROTONOSUPPORT;
}
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 5da93ee6f6be..38fd2f04c07e 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -245,9 +245,9 @@ void skip_change_remote_baud(unsigned char **ptr, long *len)
pr_err("invalid action after change remote baud command");
} else {
*ptr = *ptr + sizeof(struct bts_action) +
- ((struct bts_action *)nxt_action)->size;
+ ((struct bts_action *)cur_action)->size;
*len = *len - (sizeof(struct bts_action) +
- ((struct bts_action *)nxt_action)->size);
+ ((struct bts_action *)cur_action)->size);
/* warn user on not commenting these in firmware */
pr_warn("skipping the wait event of change remote baud");
}
@@ -604,6 +604,10 @@ void st_kim_ref(struct st_data_s **core_data, int id)
struct kim_data_s *kim_gdata;
/* get kim_gdata reference from platform device */
pdev = st_get_plat_device(id);
+ if (!pdev) {
+ *core_data = NULL;
+ return;
+ }
kim_gdata = dev_get_drvdata(&pdev->dev);
*core_data = kim_gdata->core_data;
}
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 71da5641e258..f85e42224559 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1024,7 +1024,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
INIT_LIST_HEAD(&md->part);
md->usage = 1;
- ret = mmc_init_queue(&md->queue, card, &md->lock);
+ ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
if (ret)
goto err_putdisk;
@@ -1297,6 +1297,9 @@ static void mmc_blk_remove(struct mmc_card *card)
struct mmc_blk_data *md = mmc_get_drvdata(card);
mmc_blk_remove_parts(card, md);
+ mmc_claim_host(card->host);
+ mmc_blk_part_switch(card, md);
+ mmc_release_host(card->host);
mmc_blk_remove_req(md);
mmc_set_drvdata(card, NULL);
}
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index c07322c2658c..6413afa318d2 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -106,10 +106,12 @@ static void mmc_request(struct request_queue *q)
* @mq: mmc queue
* @card: mmc card to attach this queue
* @lock: queue lock
+ * @subname: partition subname
*
* Initialise a MMC card request queue.
*/
-int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock)
+int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
+ spinlock_t *lock, const char *subname)
{
struct mmc_host *host = card->host;
u64 limit = BLK_BOUNCE_HIGH;
@@ -133,12 +135,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
mq->queue->limits.max_discard_sectors = UINT_MAX;
if (card->erased_byte == 0)
mq->queue->limits.discard_zeroes_data = 1;
- if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) {
- mq->queue->limits.discard_granularity =
- card->erase_size << 9;
- mq->queue->limits.discard_alignment =
- card->erase_size << 9;
- }
+ mq->queue->limits.discard_granularity = card->pref_erase << 9;
if (mmc_can_secure_erase_trim(card))
queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
mq->queue);
@@ -209,8 +206,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
sema_init(&mq->thread_sem, 1);
- mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d",
- host->index);
+ mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
+ host->index, subname ? subname : "");
if (IS_ERR(mq->thread)) {
ret = PTR_ERR(mq->thread);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 64e66e0d4994..6223ef8dc9cd 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -19,7 +19,8 @@ struct mmc_queue {
unsigned int bounce_sg_len;
};
-extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
+ const char *);
extern void mmc_cleanup_queue(struct mmc_queue *);
extern void mmc_queue_suspend(struct mmc_queue *);
extern void mmc_queue_resume(struct mmc_queue *);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 68091dda3f31..7843efe22359 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1245,7 +1245,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
*/
timeout_clks <<= 1;
timeout_us += (timeout_clks * 1000) /
- (card->host->ios.clock / 1000);
+ (mmc_host_clk_rate(card->host) / 1000);
erase_timeout = timeout_us / 1000;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4d0c15bfa514..262fff019177 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host)
static int mmc_sdio_power_restore(struct mmc_host *host)
{
int ret;
+ u32 ocr;
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
+
+ /*
+ * Reset the card by performing the same steps that are taken by
+ * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
+ *
+ * sdio_reset() is technically not needed. Having just powered up the
+ * hardware, it should already be in reset state. However, some
+ * platforms (such as SD8686 on OLPC) do not instantly cut power,
+ * meaning that a reset is required when restoring power soon after
+ * powering off. It is harmless in other cases.
+ *
+ * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
+ * is not necessary for non-removable cards. However, it is required
+ * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
+ * harmless in other situations.
+ *
+ * With these steps taken, mmc_select_voltage() is also required to
+ * restore the correct voltage setting of the card.
+ */
+ sdio_reset(host);
+ mmc_go_idle(host);
+ mmc_send_if_cond(host, host->ocr_avail);
+
+ ret = mmc_send_io_op_cond(host, 0, &ocr);
+ if (ret)
+ goto out;
+
+ if (host->ocr_avail_sdio)
+ host->ocr_avail = host->ocr_avail_sdio;
+
+ host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
+ if (!host->ocr) {
+ ret = -EINVAL;
+ goto out;
+ }
+
ret = mmc_sdio_init_card(host, host->ocr, host->card,
mmc_card_keep_power(host));
if (!ret && host->sdio_irqs)
mmc_signal_sdio_irq(host);
+
+out:
mmc_release_host(host);
return ret;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index d29b9c36919a..d2565df8a7fb 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -189,7 +189,7 @@ static int sdio_bus_remove(struct device *dev)
/* Then undo the runtime PM settings in sdio_bus_probe() */
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
- pm_runtime_put_noidle(dev);
+ pm_runtime_put_sync(dev);
out:
return ret;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index e2aecb7f1d5c..ab66f2454dc4 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -25,6 +25,11 @@
#include <linux/mmc/core.h>
#include <linux/mmc/host.h>
+/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
MODULE_LICENSE("GPL");
enum {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5b2e2155b413..dedf3dab8a3b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -429,7 +429,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
return -EINVAL;
}
}
- mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
/* Allow an aux regulator */
reg = regulator_get(host->dev, "vmmc_aux");
@@ -962,7 +961,8 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
spin_unlock(&host->irq_lock);
if (host->use_dma && dma_ch != -1) {
- dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+ dma_unmap_sg(mmc_dev(host->mmc), host->data->sg,
+ host->data->sg_len,
omap_hsmmc_get_dma_dir(host, host->data));
omap_free_dma(dma_ch);
}
@@ -1346,7 +1346,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
return;
}
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
omap_hsmmc_get_dma_dir(host, data));
req_in_progress = host->req_in_progress;
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index b3654293017b..ce500f03df85 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -92,7 +92,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
mmc_data->ocr_mask = p->tmio_ocr_mask;
mmc_data->capabilities |= p->tmio_caps;
- if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {
+ if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
priv->param_tx.slave_id = p->dma_slave_tx;
priv->param_rx.slave_id = p->dma_slave_rx;
priv->dma_priv.chan_priv_tx = &priv->param_tx;
@@ -165,13 +165,14 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
p->pdata = NULL;
+ tmio_mmc_host_remove(host);
+
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);
if (irq >= 0)
free_irq(irq, host);
}
- tmio_mmc_host_remove(host);
clk_disable(priv->clk);
clk_put(priv->clk);
kfree(priv);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index ad6347bb02dd..0b09e8239aa0 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -824,8 +824,8 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
- return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
- !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+ return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+ (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
}
static int tmio_mmc_get_cd(struct mmc_host *mmc)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index cbb03305b77b..d4455ffbefd8 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2096,7 +2096,7 @@ static struct mmc_host_ops vub300_mmc_ops = {
static int vub300_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{ /* NOT irq */
- struct vub300_mmc_host *vub300 = NULL;
+ struct vub300_mmc_host *vub300;
struct usb_host_interface *iface_desc;
struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
int i;
@@ -2118,23 +2118,20 @@ static int vub300_probe(struct usb_interface *interface,
command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_out_urb) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the command_out_urb\n");
+ dev_err(&udev->dev, "not enough memory for command_out_urb\n");
goto error0;
}
command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_res_urb) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the command_res_urb\n");
+ dev_err(&udev->dev, "not enough memory for command_res_urb\n");
goto error1;
}
/* this also allocates memory for our VUB300 mmc host device */
mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
if (!mmc) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the mmc_host\n");
+ dev_err(&udev->dev, "not enough memory for the mmc_host\n");
goto error4;
}
/* MMC core transfer sizes tunable parameters */
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 0bb254c7d2b1..33d8aad8bba5 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -339,9 +339,9 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(FIR_OP_UA << FIR_OP1_SHIFT) |
(FIR_OP_RBW << FIR_OP2_SHIFT));
out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
- /* 5 bytes for manuf, device and exts */
- out_be32(&lbc->fbcr, 5);
- elbc_fcm_ctrl->read_bytes = 5;
+ /* nand_get_flash_type() reads 8 bytes of entire ID string */
+ out_be32(&lbc->fbcr, 8);
+ elbc_fcm_ctrl->read_bytes = 8;
elbc_fcm_ctrl->use_mdr = 1;
elbc_fcm_ctrl->mdr = 0;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index ed6355cc5261..c2672c692d6f 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -993,6 +993,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
* features
*/
dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+ dev->vlan_features = dev->features;
dev->irq = pdev->irq;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f5919c28a4b8..4d68a264df9b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3415,7 +3415,8 @@ config NETCONSOLE
config NETCONSOLE_DYNAMIC
bool "Dynamic reconfiguration of logging targets"
- depends on NETCONSOLE && SYSFS && CONFIGFS_FS
+ depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+ !(NETCONSOLE=y && CONFIGFS_FS=m)
help
This option enables the ability to dynamically reconfigure target
parameters (interface, IP addresses, port numbers, MAC addresses)
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index 7d25a97d33f6..44e219c910da 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -1111,7 +1111,7 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
struct bna_intr_info *intr_info)
{
int err = 0;
- unsigned long flags;
+ unsigned long irq_flags = 0, flags;
u32 irq;
irq_handler_t irq_handler;
@@ -1125,18 +1125,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
if (bnad->cfg_flags & BNAD_CF_MSIX) {
irq_handler = (irq_handler_t)bnad_msix_mbox_handler;
irq = bnad->msix_table[bnad->msix_num - 1].vector;
- flags = 0;
intr_info->intr_type = BNA_INTR_T_MSIX;
intr_info->idl[0].vector = bnad->msix_num - 1;
} else {
irq_handler = (irq_handler_t)bnad_isr;
irq = bnad->pcidev->irq;
- flags = IRQF_SHARED;
+ irq_flags = IRQF_SHARED;
intr_info->intr_type = BNA_INTR_T_INTX;
/* intr_info->idl.vector = 0 ? */
}
spin_unlock_irqrestore(&bnad->bna_lock, flags);
-
+ flags = irq_flags;
sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME);
/*
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 98604350a811..5b4a8f34b13c 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -50,6 +50,7 @@
#include <linux/zlib.h>
#include <linux/io.h>
#include <linux/stringify.h>
+#include <linux/vmalloc.h>
#include "bnx2x.h"
#include "bnx2x_init.h"
@@ -5152,8 +5153,7 @@ static int bnx2x_gunzip_init(struct bnx2x *bp)
if (bp->strm == NULL)
goto gunzip_nomem2;
- bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(),
- GFP_KERNEL);
+ bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
if (bp->strm->workspace == NULL)
goto gunzip_nomem3;
@@ -5177,7 +5177,7 @@ gunzip_nomem1:
static void bnx2x_gunzip_end(struct bnx2x *bp)
{
if (bp->strm) {
- kfree(bp->strm->workspace);
+ vfree(bp->strm->workspace);
kfree(bp->strm);
bp->strm = NULL;
}
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 906366b54037..f6c98fb4a517 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -34,7 +34,7 @@ config CAN_SLCAN
config CAN_DEV
tristate "Platform CAN drivers with Netlink support"
depends on CAN
- default Y
+ default y
---help---
Enables the common framework for platform CAN drivers with Netlink
support. This is the standard library for CAN drivers.
@@ -43,7 +43,7 @@ config CAN_DEV
config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
depends on CAN_DEV
- default Y
+ default y
---help---
If enabled, CAN bit-timing parameters will be calculated for the
bit-rate specified via Netlink argument "bitrate" when the device
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 3f562ba2f0c9..76bf5892b962 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2026,7 +2026,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
skb_checksum_none_assert(skb);
- skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
+ skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]);
if (unlikely(p->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
@@ -2145,7 +2145,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
if (!complete)
return;
- skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
+ skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]);
if (unlikely(cpl->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 82c3767ec5f8..16ce45c11934 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -1017,11 +1017,10 @@ static int greth_set_mac_add(struct net_device *dev, void *p)
return -EINVAL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
+ GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 |
+ dev->dev_addr[4] << 8 | dev->dev_addr[5]);
- GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]);
- GRETH_REGSAVE(regs->esa_lsb,
- addr->sa_data[2] << 24 | addr->
- sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]);
return 0;
}
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 3e5d0b6b6516..0d283781bc5e 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -692,10 +692,10 @@ static void sixpack_close(struct tty_struct *tty)
{
struct sixpack *sp;
- write_lock(&disc_data_lock);
+ write_lock_bh(&disc_data_lock);
sp = tty->disc_data;
tty->disc_data = NULL;
- write_unlock(&disc_data_lock);
+ write_unlock_bh(&disc_data_lock);
if (!sp)
return;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 4c628393c8b1..bc02968cee16 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -813,10 +813,10 @@ static void mkiss_close(struct tty_struct *tty)
{
struct mkiss *ax;
- write_lock(&disc_data_lock);
+ write_lock_bh(&disc_data_lock);
ax = tty->disc_data;
tty->disc_data = NULL;
- write_unlock(&disc_data_lock);
+ write_unlock_bh(&disc_data_lock);
if (!ax)
return;
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be088c4ad..8f8b65af9ed5 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2360,7 +2360,8 @@ static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
PCI_DMA_FROMDEVICE);
} else {
pci_unmap_single(np->pci_dev, np->rx_dma[entry],
- buflen, PCI_DMA_FROMDEVICE);
+ buflen + NATSEMI_PADDING,
+ PCI_DMA_FROMDEVICE);
skb_put(skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
}
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c
index 31e9407a0739..1dbdf82a6dfd 100644
--- a/drivers/net/ppp_deflate.c
+++ b/drivers/net/ppp_deflate.c
@@ -305,7 +305,7 @@ static void z_decomp_free(void *arg)
if (state) {
zlib_inflateEnd(&state->strm);
- kfree(state->strm.workspace);
+ vfree(state->strm.workspace);
kfree(state);
}
}
@@ -345,8 +345,7 @@ static void *z_decomp_alloc(unsigned char *options, int opt_len)
state->w_size = w_size;
state->strm.next_out = NULL;
- state->strm.workspace = kmalloc(zlib_inflate_workspacesize(),
- GFP_KERNEL|__GFP_REPEAT);
+ state->strm.workspace = vmalloc(zlib_inflate_workspacesize());
if (state->strm.workspace == NULL)
goto out_free;
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 7d8483f9012e..794252c0aedd 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -17,7 +17,7 @@
*/
#define DRV_NAME "qlge"
#define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver "
-#define DRV_VERSION "v1.00.00.27.00.00-01"
+#define DRV_VERSION "v1.00.00.29.00.00-01"
#define WQ_ADDR_ALIGN 0x3 /* 4 byte alignment */
@@ -1997,6 +1997,7 @@ enum {
QL_LB_LINK_UP = 10,
QL_FRC_COREDUMP = 11,
QL_EEH_FATAL = 12,
+ QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */
};
/* link_status bit definitions */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index be89610f16a8..68fbfac7a3bf 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2152,6 +2152,10 @@ void ql_queue_asic_error(struct ql_adapter *qdev)
* thread
*/
clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ /* Set asic recovery bit to indicate reset process that we are
+ * in fatal error recovery process rather than normal close
+ */
+ set_bit(QL_ASIC_RECOVERY, &qdev->flags);
queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
}
@@ -2166,23 +2170,20 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev,
return;
case CAM_LOOKUP_ERR_EVENT:
- netif_err(qdev, link, qdev->ndev,
- "Multiple CAM hits lookup occurred.\n");
- netif_err(qdev, drv, qdev->ndev,
- "This event shouldn't occur.\n");
+ netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n");
+ netdev_err(qdev->ndev, "This event shouldn't occur.\n");
ql_queue_asic_error(qdev);
return;
case SOFT_ECC_ERROR_EVENT:
- netif_err(qdev, rx_err, qdev->ndev,
- "Soft ECC error detected.\n");
+ netdev_err(qdev->ndev, "Soft ECC error detected.\n");
ql_queue_asic_error(qdev);
break;
case PCI_ERR_ANON_BUF_RD:
- netif_err(qdev, rx_err, qdev->ndev,
- "PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
- ib_ae_rsp->q_id);
+ netdev_err(qdev->ndev, "PCI error occurred when reading "
+ "anonymous buffers from rx_ring %d.\n",
+ ib_ae_rsp->q_id);
ql_queue_asic_error(qdev);
break;
@@ -2437,11 +2438,10 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
*/
if (var & STS_FE) {
ql_queue_asic_error(qdev);
- netif_err(qdev, intr, qdev->ndev,
- "Got fatal error, STS = %x.\n", var);
+ netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var);
var = ql_read32(qdev, ERR_STS);
- netif_err(qdev, intr, qdev->ndev,
- "Resetting chip. Error Status Register = 0x%x\n", var);
+ netdev_err(qdev->ndev, "Resetting chip. "
+ "Error Status Register = 0x%x\n", var);
return IRQ_HANDLED;
}
@@ -3818,11 +3818,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
end_jiffies = jiffies +
max((unsigned long)1, usecs_to_jiffies(30));
- /* Stop management traffic. */
- ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+ /* Check if bit is set then skip the mailbox command and
+ * clear the bit, else we are in normal reset process.
+ */
+ if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) {
+ /* Stop management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
- /* Wait for the NIC and MGMNT FIFOs to empty. */
- ql_wait_fifo_empty(qdev);
+ /* Wait for the NIC and MGMNT FIFOs to empty. */
+ ql_wait_fifo_empty(qdev);
+ } else
+ clear_bit(QL_ASIC_RECOVERY, &qdev->flags);
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index fbd68383ca60..ef1a43dd145b 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -753,7 +753,7 @@ static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd)
msleep(2);
for (i = 0; i < 5; i++) {
udelay(100);
- if (!(RTL_R32(ERIDR) & ERIAR_FLAG))
+ if (!(RTL_R32(ERIAR) & ERIAR_FLAG))
break;
}
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index bcdc54f2fe55..86ac38c96bcf 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -378,7 +378,7 @@ static int rionet_close(struct net_device *ndev)
static void rionet_remove(struct rio_dev *rdev)
{
- struct net_device *ndev = NULL;
+ struct net_device *ndev = rio_get_drvdata(rdev);
struct rionet_peer *peer, *tmp;
free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
@@ -433,22 +433,12 @@ static const struct net_device_ops rionet_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
};
-static int rionet_setup_netdev(struct rio_mport *mport)
+static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
{
int rc = 0;
- struct net_device *ndev = NULL;
struct rionet_private *rnet;
u16 device_id;
- /* Allocate our net_device structure */
- ndev = alloc_etherdev(sizeof(struct rionet_private));
- if (ndev == NULL) {
- printk(KERN_INFO "%s: could not allocate ethernet device.\n",
- DRV_NAME);
- rc = -ENOMEM;
- goto out;
- }
-
rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
mport->sys_size ? __fls(sizeof(void *)) + 4 : 0);
if (!rionet_active) {
@@ -504,11 +494,21 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
int rc = -ENODEV;
u32 lpef, lsrc_ops, ldst_ops;
struct rionet_peer *peer;
+ struct net_device *ndev = NULL;
/* If local device is not rionet capable, give up quickly */
if (!rionet_capable)
goto out;
+ /* Allocate our net_device structure */
+ ndev = alloc_etherdev(sizeof(struct rionet_private));
+ if (ndev == NULL) {
+ printk(KERN_INFO "%s: could not allocate ethernet device.\n",
+ DRV_NAME);
+ rc = -ENOMEM;
+ goto out;
+ }
+
/*
* First time through, make sure local device is rionet
* capable, setup netdev, and set flags so this is skipped
@@ -529,7 +529,7 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
goto out;
}
- rc = rionet_setup_netdev(rdev->net->hport);
+ rc = rionet_setup_netdev(rdev->net->hport, ndev);
rionet_check = 1;
}
@@ -546,6 +546,8 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
list_add_tail(&peer->node, &rionet_peers);
}
+ rio_set_drvdata(rdev, ndev);
+
out:
return rc;
}
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index d965fb1e013e..a9b6c63d54e4 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -100,34 +100,42 @@ kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
static int
kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
{
- char init_msg_1[] =
+ const static char init_msg_1[] =
{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
0x00, 0x00 };
- char init_msg_2[] =
+ const static char init_msg_2[] =
{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
0x00, 0x00 };
- char receive_buf[28];
+ const static int buflen = 28;
+ char *usb_buf;
int status;
- status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1)
- / sizeof(init_msg_1[0]), receive_buf, 24);
+ usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
+ if (!usb_buf)
+ return -ENOMEM;
+
+ memcpy(usb_buf, init_msg_1, 12);
+ status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
+ / sizeof(init_msg_1[0]), usb_buf, 24);
if (status != 0)
return status;
- status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2)
- / sizeof(init_msg_2[0]), receive_buf, 28);
+ memcpy(usb_buf, init_msg_2, 12);
+ status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
+ / sizeof(init_msg_2[0]), usb_buf, 28);
if (status != 0)
return status;
- memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN);
+ memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
+ kfree(usb_buf);
return status;
}
static int
kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
{
- u8 status;
+ int status;
u8 ethernet_addr[ETH_ALEN];
/* Don't bind to AT command interface */
@@ -190,7 +198,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
dev_kfree_skb_any(skb);
skb = skb2;
- done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+done:
+ header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
@@ -201,9 +210,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
header_start[0] = 0x57;
header_start[1] = 0x44;
content_len = skb->len - KALMIA_HEADER_LENGTH;
- header_start[2] = (content_len & 0xff); /* low byte */
- header_start[3] = (content_len >> 8); /* high byte */
+ put_unaligned_le16(content_len, &header_start[2]);
header_start[4] = ether_type_1;
header_start[5] = ether_type_2;
@@ -231,13 +239,13 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
* Our task here is to strip off framing, leaving skb with one
* data frame for the usbnet framework code to process.
*/
- const u8 HEADER_END_OF_USB_PACKET[] =
+ const static u8 HEADER_END_OF_USB_PACKET[] =
{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
- const u8 EXPECTED_UNKNOWN_HEADER_1[] =
+ const static u8 EXPECTED_UNKNOWN_HEADER_1[] =
{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
- const u8 EXPECTED_UNKNOWN_HEADER_2[] =
+ const static u8 EXPECTED_UNKNOWN_HEADER_2[] =
{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
- u8 i = 0;
+ int i = 0;
/* incomplete header? */
if (skb->len < KALMIA_HEADER_LENGTH)
@@ -285,7 +293,7 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
/* subtract start header and end header */
usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
- ether_packet_length = header_start[2] + (header_start[3] << 8);
+ ether_packet_length = get_unaligned_le16(&header_start[2]);
skb_pull(skb, KALMIA_HEADER_LENGTH);
/* Some small packets misses end marker */
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index 241756e0e86f..1a2234c20514 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -331,17 +331,7 @@ static const struct usb_device_id products [] = {
ZAURUS_MASTER_INTERFACE,
.driver_info = ZAURUS_PXA_INFO,
},
-
-
-/* At least some of the newest PXA units have very different lies about
- * their standards support: they claim to be cell phones offering
- * direct access to their radios! (No, they don't conform to CDC MDLM.)
- */
{
- USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
- USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &bogus_mdlm_info,
-}, {
/* Motorola MOTOMAGX phones */
USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 2c1473686abe..fabcded7c6a0 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -573,7 +573,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx];
u32 val;
- while (num_allocated < num_to_alloc) {
+ while (num_allocated <= num_to_alloc) {
struct vmxnet3_rx_buf_info *rbi;
union Vmxnet3_GenericDesc *gd;
@@ -619,9 +619,15 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
BUG_ON(rbi->dma_addr == 0);
gd->rxd.addr = cpu_to_le64(rbi->dma_addr);
- gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT)
+ gd->dword[2] = cpu_to_le32((!ring->gen << VMXNET3_RXD_GEN_SHIFT)
| val | rbi->len);
+ /* Fill the last buffer but dont mark it ready, or else the
+ * device will think that the queue is full */
+ if (num_allocated == num_to_alloc)
+ break;
+
+ gd->dword[2] |= cpu_to_le32(ring->gen << VMXNET3_RXD_GEN_SHIFT);
num_allocated++;
vmxnet3_cmd_ring_adv_next2fill(ring);
}
@@ -1138,6 +1144,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2
};
u32 num_rxd = 0;
+ bool skip_page_frags = false;
struct Vmxnet3_RxCompDesc *rcd;
struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
#ifdef __BIG_ENDIAN_BITFIELD
@@ -1148,11 +1155,12 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
&rxComp);
while (rcd->gen == rq->comp_ring.gen) {
struct vmxnet3_rx_buf_info *rbi;
- struct sk_buff *skb;
+ struct sk_buff *skb, *new_skb = NULL;
+ struct page *new_page = NULL;
int num_to_alloc;
struct Vmxnet3_RxDesc *rxd;
u32 idx, ring_idx;
-
+ struct vmxnet3_cmd_ring *ring = NULL;
if (num_rxd >= quota) {
/* we may stop even before we see the EOP desc of
* the current pkt
@@ -1163,6 +1171,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2);
idx = rcd->rxdIdx;
ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1;
+ ring = rq->rx_ring + ring_idx;
vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd,
&rxCmdDesc);
rbi = rq->buf_info[ring_idx] + idx;
@@ -1191,37 +1200,80 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
goto rcd_done;
}
+ skip_page_frags = false;
ctx->skb = rbi->skb;
- rbi->skb = NULL;
+ new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN);
+ if (new_skb == NULL) {
+ /* Skb allocation failed, do not handover this
+ * skb to stack. Reuse it. Drop the existing pkt
+ */
+ rq->stats.rx_buf_alloc_failure++;
+ ctx->skb = NULL;
+ rq->stats.drop_total++;
+ skip_page_frags = true;
+ goto rcd_done;
+ }
pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len,
PCI_DMA_FROMDEVICE);
skb_put(ctx->skb, rcd->len);
+
+ /* Immediate refill */
+ new_skb->dev = adapter->netdev;
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ rbi->skb = new_skb;
+ rbi->dma_addr = pci_map_single(adapter->pdev,
+ rbi->skb->data, rbi->len,
+ PCI_DMA_FROMDEVICE);
+ rxd->addr = cpu_to_le64(rbi->dma_addr);
+ rxd->len = rbi->len;
+
} else {
- BUG_ON(ctx->skb == NULL);
+ BUG_ON(ctx->skb == NULL && !skip_page_frags);
+
/* non SOP buffer must be type 1 in most cases */
- if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) {
- BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
+ BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE);
+ BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
- if (rcd->len) {
- pci_unmap_page(adapter->pdev,
- rbi->dma_addr, rbi->len,
- PCI_DMA_FROMDEVICE);
+ /* If an sop buffer was dropped, skip all
+ * following non-sop fragments. They will be reused.
+ */
+ if (skip_page_frags)
+ goto rcd_done;
- vmxnet3_append_frag(ctx->skb, rcd, rbi);
- rbi->page = NULL;
- }
- } else {
- /*
- * The only time a non-SOP buffer is type 0 is
- * when it's EOP and error flag is raised, which
- * has already been handled.
+ new_page = alloc_page(GFP_ATOMIC);
+ if (unlikely(new_page == NULL)) {
+ /* Replacement page frag could not be allocated.
+ * Reuse this page. Drop the pkt and free the
+ * skb which contained this page as a frag. Skip
+ * processing all the following non-sop frags.
*/
- BUG_ON(true);
+ rq->stats.rx_buf_alloc_failure++;
+ dev_kfree_skb(ctx->skb);
+ ctx->skb = NULL;
+ skip_page_frags = true;
+ goto rcd_done;
+ }
+
+ if (rcd->len) {
+ pci_unmap_page(adapter->pdev,
+ rbi->dma_addr, rbi->len,
+ PCI_DMA_FROMDEVICE);
+
+ vmxnet3_append_frag(ctx->skb, rcd, rbi);
}
+
+ /* Immediate refill */
+ rbi->page = new_page;
+ rbi->dma_addr = pci_map_page(adapter->pdev, rbi->page,
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ rxd->addr = cpu_to_le64(rbi->dma_addr);
+ rxd->len = rbi->len;
}
+
skb = ctx->skb;
if (rcd->eop) {
skb->len += skb->data_len;
@@ -1243,26 +1295,27 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
}
rcd_done:
- /* device may skip some rx descs */
- rq->rx_ring[ring_idx].next2comp = idx;
- VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp,
- rq->rx_ring[ring_idx].size);
-
- /* refill rx buffers frequently to avoid starving the h/w */
- num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring +
- ring_idx);
- if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq,
- ring_idx, adapter))) {
- vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc,
- adapter);
-
- /* if needed, update the register */
- if (unlikely(rq->shared->updateRxProd)) {
- VMXNET3_WRITE_BAR0_REG(adapter,
- rxprod_reg[ring_idx] + rq->qid * 8,
- rq->rx_ring[ring_idx].next2fill);
- rq->uncommitted[ring_idx] = 0;
- }
+ /* device may have skipped some rx descs */
+ ring->next2comp = idx;
+ num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring);
+ ring = rq->rx_ring + ring_idx;
+ while (num_to_alloc) {
+ vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd,
+ &rxCmdDesc);
+ BUG_ON(!rxd->addr);
+
+ /* Recv desc is ready to be used by the device */
+ rxd->gen = ring->gen;
+ vmxnet3_cmd_ring_adv_next2fill(ring);
+ num_to_alloc--;
+ }
+
+ /* if needed, update the register */
+ if (unlikely(rq->shared->updateRxProd)) {
+ VMXNET3_WRITE_BAR0_REG(adapter,
+ rxprod_reg[ring_idx] + rq->qid * 8,
+ ring->next2fill);
+ rq->uncommitted[ring_idx] = 0;
}
vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring);
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index 2e37985809d2..a9cb3fabb17f 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -69,10 +69,10 @@
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.14.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01010900
+#define VMXNET3_DRIVER_VERSION_NUM 0x01010E00
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 1fef84f87c78..392771f93759 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -691,14 +691,12 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
if (!chinfo[pier].pd_curves)
continue;
- for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+ for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) {
struct ath5k_pdgain_info *pd =
&chinfo[pier].pd_curves[pdg];
- if (pd != NULL) {
- kfree(pd->pd_step);
- kfree(pd->pd_pwr);
- }
+ kfree(pd->pd_step);
+ kfree(pd->pd_pwr);
}
kfree(chinfo[pier].pd_curves);
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index b8cbfc707213..3bad0b2cf9a3 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -278,6 +278,12 @@ static int ath_pci_suspend(struct device *device)
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
+ /* The device has to be moved to FULLSLEEP forcibly.
+ * Otherwise the chip never moved to full sleep,
+ * when no interface is up.
+ */
+ ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+
return 0;
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 135df164a4c1..46767c53917a 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -624,7 +624,7 @@ static int pci_pm_prepare(struct device *dev)
* system from the sleep state, we'll have to prevent it from signaling
* wake-up.
*/
- pm_runtime_resume(dev);
+ pm_runtime_get_sync(dev);
if (drv && drv->pm && drv->pm->prepare)
error = drv->pm->prepare(dev);
@@ -638,6 +638,8 @@ static void pci_pm_complete(struct device *dev)
if (drv && drv->pm && drv->pm->complete)
drv->pm->complete(dev);
+
+ pm_runtime_put_sync(dev);
}
#else /* !CONFIG_PM_SLEEP */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5f10c23dff94..2c5b9b991279 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3284,7 +3284,7 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
* @dev: the PCI device
* @decode: true = enable decoding, false = disable decoding
* @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge_flags: traverse ancestors and change bridges
+ * @flags: traverse ancestors and change bridges
* CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
*/
int pci_set_vga_state(struct pci_dev *dev, bool decode,
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 48849ffdd672..bafb3c3d4a89 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -168,7 +168,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
if (type == pci_bar_io) {
l &= PCI_BASE_ADDRESS_IO_MASK;
- mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
+ mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT;
} else {
l &= PCI_BASE_ADDRESS_MEM_MASK;
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e8a140669f90..02145e9697a9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2761,6 +2761,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 4724ba3acf1a..b2005b44e4f7 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -149,6 +149,7 @@ static const struct i2c_device_id ds1307_id[] = {
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
{ "m41t00", m41t00 },
+ { "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ }
};
diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c
index b8bc862903ae..efd6066b5cd2 100644
--- a/drivers/rtc/rtc-vt8500.c
+++ b/drivers/rtc/rtc-vt8500.c
@@ -78,7 +78,6 @@ struct vt8500_rtc {
void __iomem *regbase;
struct resource *res;
int irq_alarm;
- int irq_hz;
struct rtc_device *rtc;
spinlock_t lock; /* Protects this structure */
};
@@ -100,10 +99,6 @@ static irqreturn_t vt8500_rtc_irq(int irq, void *dev_id)
if (isr & 1)
events |= RTC_AF | RTC_IRQF;
- /* Only second/minute interrupts are supported */
- if (isr & 2)
- events |= RTC_UF | RTC_IRQF;
-
rtc_update_irq(vt8500_rtc->rtc, 1, events);
return IRQ_HANDLED;
@@ -199,27 +194,12 @@ static int vt8500_alarm_irq_enable(struct device *dev, unsigned int enabled)
return 0;
}
-static int vt8500_update_irq_enable(struct device *dev, unsigned int enabled)
-{
- struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
- unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_CR);
-
- if (enabled)
- tmp |= VT8500_RTC_CR_SM_SEC | VT8500_RTC_CR_SM_ENABLE;
- else
- tmp &= ~VT8500_RTC_CR_SM_ENABLE;
-
- writel(tmp, vt8500_rtc->regbase + VT8500_RTC_CR);
- return 0;
-}
-
static const struct rtc_class_ops vt8500_rtc_ops = {
.read_time = vt8500_rtc_read_time,
.set_time = vt8500_rtc_set_time,
.read_alarm = vt8500_rtc_read_alarm,
.set_alarm = vt8500_rtc_set_alarm,
.alarm_irq_enable = vt8500_alarm_irq_enable,
- .update_irq_enable = vt8500_update_irq_enable,
};
static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
@@ -248,13 +228,6 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
goto err_free;
}
- vt8500_rtc->irq_hz = platform_get_irq(pdev, 1);
- if (vt8500_rtc->irq_hz < 0) {
- dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
- ret = -ENXIO;
- goto err_free;
- }
-
vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start,
resource_size(vt8500_rtc->res),
"vt8500-rtc");
@@ -272,9 +245,8 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
goto err_release;
}
- /* Enable the second/minute interrupt generation and enable RTC */
- writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H
- | VT8500_RTC_CR_SM_ENABLE | VT8500_RTC_CR_SM_SEC,
+ /* Enable RTC and set it to 24-hour mode */
+ writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H,
vt8500_rtc->regbase + VT8500_RTC_CR);
vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev,
@@ -286,26 +258,16 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
goto err_unmap;
}
- ret = request_irq(vt8500_rtc->irq_hz, vt8500_rtc_irq, 0,
- "rtc 1Hz", vt8500_rtc);
- if (ret < 0) {
- dev_err(&pdev->dev, "can't get irq %i, err %d\n",
- vt8500_rtc->irq_hz, ret);
- goto err_unreg;
- }
-
ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0,
"rtc alarm", vt8500_rtc);
if (ret < 0) {
dev_err(&pdev->dev, "can't get irq %i, err %d\n",
vt8500_rtc->irq_alarm, ret);
- goto err_free_hz;
+ goto err_unreg;
}
return 0;
-err_free_hz:
- free_irq(vt8500_rtc->irq_hz, vt8500_rtc);
err_unreg:
rtc_device_unregister(vt8500_rtc->rtc);
err_unmap:
@@ -323,7 +285,6 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev)
struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev);
free_irq(vt8500_rtc->irq_alarm, vt8500_rtc);
- free_irq(vt8500_rtc->irq_hz, vt8500_rtc);
rtc_device_unregister(vt8500_rtc->rtc);
diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig
index f4cf9b23481e..379cf16e89f7 100644
--- a/drivers/staging/brcm80211/Kconfig
+++ b/drivers/staging/brcm80211/Kconfig
@@ -7,6 +7,7 @@ config BRCMSMAC
default n
depends on PCI
depends on WLAN && MAC80211
+ depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select CRC_CCITT
@@ -20,6 +21,7 @@ config BRCMFMAC
default n
depends on MMC
depends on WLAN && CFG80211
+ depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select WIRELESS_EXT
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 1502d80f6f78..20008a4376e8 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -2,6 +2,7 @@ config COMEDI
tristate "Data acquisition support (comedi)"
default N
depends on m
+ depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
---help---
Enable support a wide range of data acquisition devices
for Linux.
@@ -160,6 +161,7 @@ config COMEDI_PCL730
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
@@ -171,6 +173,7 @@ config COMEDI_PCL812
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -180,6 +183,7 @@ config COMEDI_PCL816
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-818 ISA cards
@@ -269,6 +273,7 @@ config COMEDI_DAS800
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -340,6 +345,7 @@ config COMEDI_DT2817
config COMEDI_DT282X
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Data Translation DT2821 series including DT-EZ
@@ -419,6 +425,7 @@ config COMEDI_ADQ12B
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
depends on COMEDI_NI_COMMON
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments AT-A2150 cards
@@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_035 cards
@@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1032 cards
@@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1500 cards
@@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI_1516 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1516 cards
@@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1564 cards
@@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_16xx cards
@@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX
config COMEDI_ADDI_APCI_2016
tristate "ADDI-DATA APCI_2016 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2016 cards
@@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2032 cards
@@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2200 cards
@@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200
config COMEDI_ADDI_APCI_3001
tristate "ADDI-DATA APCI_3001 support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3520 support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3501 cards
@@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3xxx cards
@@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC
depends on COMEDI_MITE
select COMEDI_8255
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments Lab-PC and compatibles
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index f96d5b5d5141..d329635fb5c4 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -4,7 +4,7 @@
menuconfig IIO
tristate "Industrial I/O support"
- depends on !S390
+ depends on GENERIC_HARDIRQS
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index 5310a4297688..1690c0d15690 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -84,7 +84,6 @@ struct adis16204_state {
int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16204_scan {
ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_ACC_X,
@@ -93,6 +92,7 @@ enum adis16204_scan {
ADIS16204_SCAN_TEMP,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16204_remove_trigger(struct iio_dev *indio_dev);
int adis16204_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 58d08db6f9b5..3153cbee0957 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -121,8 +121,6 @@ struct adis16209_state {
int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
-
#define ADIS16209_SCAN_SUPPLY 0
#define ADIS16209_SCAN_ACC_X 1
#define ADIS16209_SCAN_ACC_Y 2
@@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16209_SCAN_INCLI_Y 6
#define ADIS16209_SCAN_ROT 7
+#ifdef CONFIG_IIO_RING_BUFFER
+
void adis16209_remove_trigger(struct iio_dev *indio_dev);
int adis16209_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index 702dc982f62f..24bf70e4b29b 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -104,7 +104,6 @@ struct adis16260_state {
int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
@@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16260_SCAN_TEMP 3
#define ADIS16260_SCAN_ANGL 4
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16260_remove_trigger(struct iio_dev *indio_dev);
int adis16260_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index db184d11dfc0..e87715b9acc6 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -158,7 +158,6 @@ struct adis16400_state {
int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
@@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
#define ADIS16300_SCAN_INCLI_X 12
#define ADIS16300_SCAN_INCLI_Y 13
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16400_remove_trigger(struct iio_dev *indio_dev);
int adis16400_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c
index d1ffa32cd141..685fcf639644 100644
--- a/drivers/staging/mei/init.c
+++ b/drivers/staging/mei/init.c
@@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev)
mutex_lock(&dev->device_lock);
}
- if (!err && !dev->recvd_msg) {
+ if (err <= 0 && !dev->recvd_msg) {
dev->mei_state = MEI_DISABLED;
dev_dbg(&dev->pdev->dev,
"wait_event_interruptible_timeout failed"
diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c
index 2564b038636a..fff53d0b5c6e 100644
--- a/drivers/staging/mei/wd.c
+++ b/drivers/staging/mei/wd.c
@@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
dev->wd_stopped, 10 * HZ);
mutex_lock(&dev->device_lock);
- if (!dev->wd_stopped)
- dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n");
- else
- dev_dbg(&dev->pdev->dev, "stop wd complete.\n");
+ if (dev->wd_stopped) {
+ dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+ ret = 0;
+ } else {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ dev_warn(&dev->pdev->dev,
+ "stop wd failed to complete ret=%d.\n", ret);
+ }
if (preserve)
dev->wd_timeout = wd_timeout;
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index dee2a2c909f5..70c2e7fa6664 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -386,7 +386,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc)
*/
se_cmd->se_tmr_req = core_tmr_alloc_req(se_cmd, (void *)tl_tmr,
TMR_LUN_RESET);
- if (!se_cmd->se_tmr_req)
+ if (IS_ERR(se_cmd->se_tmr_req))
goto release;
/*
* Locate the underlying TCM struct se_lun from sc->device->lun
@@ -1017,6 +1017,7 @@ static int tcm_loop_make_nexus(
struct se_portal_group *se_tpg;
struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba;
struct tcm_loop_nexus *tl_nexus;
+ int ret = -ENOMEM;
if (tl_tpg->tl_hba->tl_nexus) {
printk(KERN_INFO "tl_tpg->tl_hba->tl_nexus already exists\n");
@@ -1033,8 +1034,10 @@ static int tcm_loop_make_nexus(
* Initialize the struct se_session pointer
*/
tl_nexus->se_sess = transport_init_session();
- if (!tl_nexus->se_sess)
+ if (IS_ERR(tl_nexus->se_sess)) {
+ ret = PTR_ERR(tl_nexus->se_sess);
goto out;
+ }
/*
* Since we are running in 'demo mode' this call with generate a
* struct se_node_acl for the tcm_loop struct se_portal_group with the SCSI
@@ -1060,7 +1063,7 @@ static int tcm_loop_make_nexus(
out:
kfree(tl_nexus);
- return -ENOMEM;
+ return ret;
}
static int tcm_loop_drop_nexus(
@@ -1140,7 +1143,7 @@ static ssize_t tcm_loop_tpg_store_nexus(
* the fabric protocol_id set in tcm_loop_make_scsi_hba(), and call
* tcm_loop_make_nexus()
*/
- if (strlen(page) > TL_WWN_ADDR_LEN) {
+ if (strlen(page) >= TL_WWN_ADDR_LEN) {
printk(KERN_ERR "Emulated NAA Sas Address: %s, exceeds"
" max: %d\n", page, TL_WWN_ADDR_LEN);
return -EINVAL;
@@ -1321,7 +1324,7 @@ struct se_wwn *tcm_loop_make_scsi_hba(
return ERR_PTR(-EINVAL);
check_len:
- if (strlen(name) > TL_WWN_ADDR_LEN) {
+ if (strlen(name) >= TL_WWN_ADDR_LEN) {
printk(KERN_ERR "Emulated NAA %s Address: %s, exceeds"
" max: %d\n", name, tcm_loop_dump_proto_id(tl_hba),
TL_WWN_ADDR_LEN);
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index ee6fad979b50..25c1f49a7d8b 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -304,7 +304,7 @@ struct target_fabric_configfs *target_fabric_configfs_init(
printk(KERN_ERR "Unable to locate passed fabric name\n");
return NULL;
}
- if (strlen(name) > TARGET_FABRIC_NAME_SIZE) {
+ if (strlen(name) >= TARGET_FABRIC_NAME_SIZE) {
printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC"
"_NAME_SIZE\n", name);
return NULL;
@@ -312,7 +312,7 @@ struct target_fabric_configfs *target_fabric_configfs_init(
tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL);
if (!(tf))
- return ERR_PTR(-ENOMEM);
+ return NULL;
INIT_LIST_HEAD(&tf->tf_list);
atomic_set(&tf->tf_access_cnt, 0);
@@ -851,7 +851,7 @@ static ssize_t target_core_dev_wwn_store_attr_vpd_unit_serial(
return -EOPNOTSUPP;
}
- if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) {
+ if (strlen(page) >= INQUIRY_VPD_SERIAL_LEN) {
printk(KERN_ERR "Emulated VPD Unit Serial exceeds"
" INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN);
return -EOVERFLOW;
@@ -917,7 +917,7 @@ static ssize_t target_core_dev_wwn_show_attr_vpd_protocol_identifier(
transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE);
- if ((len + strlen(buf) > PAGE_SIZE))
+ if ((len + strlen(buf) >= PAGE_SIZE))
break;
len += sprintf(page+len, "%s", buf);
@@ -962,19 +962,19 @@ static ssize_t target_core_dev_wwn_show_attr_##_name( \
\
memset(buf, 0, VPD_TMP_BUF_SIZE); \
transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE); \
- if ((len + strlen(buf) > PAGE_SIZE)) \
+ if ((len + strlen(buf) >= PAGE_SIZE)) \
break; \
len += sprintf(page+len, "%s", buf); \
\
memset(buf, 0, VPD_TMP_BUF_SIZE); \
transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \
- if ((len + strlen(buf) > PAGE_SIZE)) \
+ if ((len + strlen(buf) >= PAGE_SIZE)) \
break; \
len += sprintf(page+len, "%s", buf); \
\
memset(buf, 0, VPD_TMP_BUF_SIZE); \
transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \
- if ((len + strlen(buf) > PAGE_SIZE)) \
+ if ((len + strlen(buf) >= PAGE_SIZE)) \
break; \
len += sprintf(page+len, "%s", buf); \
} \
@@ -1299,7 +1299,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_registered_i_pts(
&i_buf[0] : "", pr_reg->pr_res_key,
pr_reg->pr_res_generation);
- if ((len + strlen(buf) > PAGE_SIZE))
+ if ((len + strlen(buf) >= PAGE_SIZE))
break;
len += sprintf(page+len, "%s", buf);
@@ -1496,7 +1496,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata(
ret = -ENOMEM;
goto out;
}
- if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) {
+ if (strlen(i_port) >= PR_APTPL_MAX_IPORT_LEN) {
printk(KERN_ERR "APTPL metadata initiator_node="
" exceeds PR_APTPL_MAX_IPORT_LEN: %d\n",
PR_APTPL_MAX_IPORT_LEN);
@@ -1510,7 +1510,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata(
ret = -ENOMEM;
goto out;
}
- if (strlen(isid) > PR_REG_ISID_LEN) {
+ if (strlen(isid) >= PR_REG_ISID_LEN) {
printk(KERN_ERR "APTPL metadata initiator_isid"
"= exceeds PR_REG_ISID_LEN: %d\n",
PR_REG_ISID_LEN);
@@ -1571,7 +1571,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata(
ret = -ENOMEM;
goto out;
}
- if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) {
+ if (strlen(t_port) >= PR_APTPL_MAX_TPORT_LEN) {
printk(KERN_ERR "APTPL metadata target_node="
" exceeds PR_APTPL_MAX_TPORT_LEN: %d\n",
PR_APTPL_MAX_TPORT_LEN);
@@ -3052,7 +3052,7 @@ static struct config_group *target_core_call_addhbatotarget(
int ret;
memset(buf, 0, TARGET_CORE_NAME_MAX_LEN);
- if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) {
+ if (strlen(name) >= TARGET_CORE_NAME_MAX_LEN) {
printk(KERN_ERR "Passed *name strlen(): %d exceeds"
" TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name),
TARGET_CORE_NAME_MAX_LEN);
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 8407f9ca2b31..ba698ea62bb2 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -192,7 +192,7 @@ int transport_get_lun_for_tmr(
&SE_NODE_ACL(se_sess)->device_list[unpacked_lun];
if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) {
se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun;
- dev = se_tmr->tmr_dev = se_lun->lun_se_dev;
+ dev = se_lun->lun_se_dev;
se_cmd->pr_res_key = deve->pr_res_key;
se_cmd->orig_fe_lun = unpacked_lun;
se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev;
@@ -216,6 +216,7 @@ int transport_get_lun_for_tmr(
se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
return -1;
}
+ se_tmr->tmr_dev = dev;
spin_lock(&dev->se_tmr_lock);
list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list);
@@ -1430,7 +1431,7 @@ struct se_lun_acl *core_dev_init_initiator_node_lun_acl(
struct se_lun_acl *lacl;
struct se_node_acl *nacl;
- if (strlen(initiatorname) > TRANSPORT_IQN_LEN) {
+ if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) {
printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n",
TPG_TFO(tpg)->get_fabric_name());
*ret = -EOVERFLOW;
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index a79f518ca6e2..b662db3a320b 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1916,7 +1916,7 @@ static int __core_scsi3_update_aptpl_buf(
pr_reg->pr_res_mapped_lun);
}
- if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+ if ((len + strlen(tmp) >= pr_aptpl_buf_len)) {
printk(KERN_ERR "Unable to update renaming"
" APTPL metadata\n");
spin_unlock(&T10_RES(su_dev)->registration_lock);
@@ -1934,7 +1934,7 @@ static int __core_scsi3_update_aptpl_buf(
TPG_TFO(tpg)->tpg_get_tag(tpg),
lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count);
- if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+ if ((len + strlen(tmp) >= pr_aptpl_buf_len)) {
printk(KERN_ERR "Unable to update renaming"
" APTPL metadata\n");
spin_unlock(&T10_RES(su_dev)->registration_lock);
@@ -1986,7 +1986,7 @@ static int __core_scsi3_write_aptpl_to_file(
memset(iov, 0, sizeof(struct iovec));
memset(path, 0, 512);
- if (strlen(&wwn->unit_serial[0]) > 512) {
+ if (strlen(&wwn->unit_serial[0]) >= 512) {
printk(KERN_ERR "WWN value for struct se_device does not fit"
" into path buffer\n");
return -1;
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 59b8b9c5ad72..179063d81cdd 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -75,10 +75,16 @@ void core_tmr_release_req(
{
struct se_device *dev = tmr->tmr_dev;
+ if (!dev) {
+ kmem_cache_free(se_tmr_req_cache, tmr);
+ return;
+ }
+
spin_lock(&dev->se_tmr_lock);
list_del(&tmr->tmr_list);
- kmem_cache_free(se_tmr_req_cache, tmr);
spin_unlock(&dev->se_tmr_lock);
+
+ kmem_cache_free(se_tmr_req_cache, tmr);
}
static void core_tmr_handle_tas_abort(
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 4dafeb8b5638..4b9b7169bdd9 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -536,13 +536,13 @@ EXPORT_SYMBOL(transport_register_session);
void transport_deregister_session_configfs(struct se_session *se_sess)
{
struct se_node_acl *se_nacl;
-
+ unsigned long flags;
/*
* Used by struct se_node_acl's under ConfigFS to locate active struct se_session
*/
se_nacl = se_sess->se_node_acl;
if ((se_nacl)) {
- spin_lock_irq(&se_nacl->nacl_sess_lock);
+ spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags);
list_del(&se_sess->sess_acl_list);
/*
* If the session list is empty, then clear the pointer.
@@ -556,7 +556,7 @@ void transport_deregister_session_configfs(struct se_session *se_sess)
se_nacl->acl_sess_list.prev,
struct se_session, sess_acl_list);
}
- spin_unlock_irq(&se_nacl->nacl_sess_lock);
+ spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
}
}
EXPORT_SYMBOL(transport_deregister_session_configfs);
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
index defff32b7880..7b82f1b7fef8 100644
--- a/drivers/target/tcm_fc/tcm_fc.h
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -144,7 +144,7 @@ enum ft_cmd_state {
*/
struct ft_cmd {
enum ft_cmd_state state;
- u16 lun; /* LUN from request */
+ u32 lun; /* LUN from request */
struct ft_sess *sess; /* session held for cmd */
struct fc_seq *seq; /* sequence in exchange mgr */
struct se_cmd se_cmd; /* Local TCM I/O descriptor */
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
index c056a1132ae1..b2a106729d49 100644
--- a/drivers/target/tcm_fc/tfc_cmd.c
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -94,29 +94,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller)
16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
}
-/*
- * Get LUN from CDB.
- */
-static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp)
-{
- u64 lun;
-
- lun = lunp[1];
- switch (lunp[0] >> 6) {
- case 0:
- break;
- case 1:
- lun |= (lunp[0] & 0x3f) << 8;
- break;
- default:
- return -1;
- }
- if (lun >= TRANSPORT_MAX_LUNS_PER_TPG)
- return -1;
- cmd->lun = lun;
- return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun);
-}
-
static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
{
struct se_queue_obj *qobj;
@@ -418,6 +395,7 @@ static void ft_send_tm(struct ft_cmd *cmd)
{
struct se_tmr_req *tmr;
struct fcp_cmnd *fcp;
+ struct ft_sess *sess;
u8 tm_func;
fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
@@ -425,13 +403,6 @@ static void ft_send_tm(struct ft_cmd *cmd)
switch (fcp->fc_tm_flags) {
case FCP_TMF_LUN_RESET:
tm_func = TMR_LUN_RESET;
- if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) {
- ft_dump_cmd(cmd, __func__);
- transport_send_check_condition_and_sense(&cmd->se_cmd,
- cmd->se_cmd.scsi_sense_reason, 0);
- ft_sess_put(cmd->sess);
- return;
- }
break;
case FCP_TMF_TGT_RESET:
tm_func = TMR_TARGET_WARM_RESET;
@@ -463,6 +434,36 @@ static void ft_send_tm(struct ft_cmd *cmd)
return;
}
cmd->se_cmd.se_tmr_req = tmr;
+
+ switch (fcp->fc_tm_flags) {
+ case FCP_TMF_LUN_RESET:
+ cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun);
+ if (transport_get_lun_for_tmr(&cmd->se_cmd, cmd->lun) < 0) {
+ /*
+ * Make sure to clean up newly allocated TMR request
+ * since "unable to handle TMR request because failed
+ * to get to LUN"
+ */
+ FT_TM_DBG("Failed to get LUN for TMR func %d, "
+ "se_cmd %p, unpacked_lun %d\n",
+ tm_func, &cmd->se_cmd, cmd->lun);
+ ft_dump_cmd(cmd, __func__);
+ sess = cmd->sess;
+ transport_send_check_condition_and_sense(&cmd->se_cmd,
+ cmd->se_cmd.scsi_sense_reason, 0);
+ transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
+ ft_sess_put(sess);
+ return;
+ }
+ break;
+ case FCP_TMF_TGT_RESET:
+ case FCP_TMF_CLR_TASK_SET:
+ case FCP_TMF_ABT_TASK_SET:
+ case FCP_TMF_CLR_ACA:
+ break;
+ default:
+ return;
+ }
transport_generic_handle_tmr(&cmd->se_cmd);
}
@@ -635,7 +636,8 @@ static void ft_send_cmd(struct ft_cmd *cmd)
fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd);
- ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun);
+ cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun);
+ ret = transport_get_lun_for_cmd(&cmd->se_cmd, NULL, cmd->lun);
if (ret < 0) {
ft_dump_cmd(cmd, __func__);
transport_send_check_condition_and_sense(&cmd->se_cmd,
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index 4c3c0efbe13f..8c4a24077d9d 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -203,7 +203,7 @@ int ft_queue_data_in(struct se_cmd *se_cmd)
/* XXX For now, initiator will retry */
if (printk_ratelimit())
printk(KERN_ERR "%s: Failed to send frame %p, "
- "xid <0x%x>, remaining <0x%x>, "
+ "xid <0x%x>, remaining %zu, "
"lso_max <0x%x>\n",
__func__, fp, ep->xid,
remaining, lport->lso_max);
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
index a3bd57f2ea32..7491e21cc6ae 100644
--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -229,7 +229,7 @@ static struct ft_sess *ft_sess_create(struct ft_tport *tport, u32 port_id,
return NULL;
sess->se_sess = transport_init_session();
- if (!sess->se_sess) {
+ if (IS_ERR(sess->se_sess)) {
kfree(sess);
return NULL;
}
@@ -332,7 +332,7 @@ void ft_sess_close(struct se_session *se_sess)
lport = sess->tport->lport;
port_id = sess->port_id;
if (port_id == -1) {
- mutex_lock(&ft_lport_lock);
+ mutex_unlock(&ft_lport_lock);
return;
}
FT_SESS_DBG("port_id %x\n", port_id);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 09e8c7d53af3..19b4ae052af8 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -875,7 +875,8 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
*dp++ = last << 7 | first << 6 | 1; /* EA */
len--;
}
- memcpy(dp, skb_pull(dlci->skb, len), len);
+ memcpy(dp, dlci->skb->data, len);
+ skb_pull(dlci->skb, len);
__gsm_data_queue(dlci, msg);
if (last)
dlci->skb = NULL;
@@ -984,10 +985,22 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data,
*/
static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
- u32 modem)
+ u32 modem, int clen)
{
int mlines = 0;
- u8 brk = modem >> 6;
+ u8 brk = 0;
+
+ /* The modem status command can either contain one octet (v.24 signals)
+ or two octets (v.24 signals + break signals). The length field will
+ either be 2 or 3 respectively. This is specified in section
+ 5.4.6.3.7 of the 27.010 mux spec. */
+
+ if (clen == 2)
+ modem = modem & 0x7f;
+ else {
+ brk = modem & 0x7f;
+ modem = (modem >> 7) & 0x7f;
+ };
/* Flow control/ready to communicate */
if (modem & MDM_FC) {
@@ -1061,7 +1074,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
return;
}
tty = tty_port_tty_get(&dlci->port);
- gsm_process_modem(tty, dlci, modem);
+ gsm_process_modem(tty, dlci, modem, clen);
if (tty) {
tty_wakeup(tty);
tty_kref_put(tty);
@@ -1482,12 +1495,13 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci)
* open we shovel the bits down it, if not we drop them.
*/
-static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
+static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
{
/* krefs .. */
struct tty_port *port = &dlci->port;
struct tty_struct *tty = tty_port_tty_get(port);
unsigned int modem = 0;
+ int len = clen;
if (debug & 16)
pr_debug("%d bytes for tty %p\n", len, tty);
@@ -1507,7 +1521,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
if (len == 0)
return;
}
- gsm_process_modem(tty, dlci, modem);
+ gsm_process_modem(tty, dlci, modem, clen);
/* Line state will go via DLCI 0 controls only */
case 1:
default:
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0ad32888091c..c3954fbf6ac4 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1815,6 +1815,7 @@ do_it_again:
/* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
+ BUG_ON(!tty->read_buf);
continue;
}
__set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b40f7b90c81d..b4129f53fb1b 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -3318,6 +3318,7 @@ void serial8250_unregister_port(int line)
uart->port.flags &= ~UPF_BOOT_AUTOCONF;
uart->port.type = PORT_UNKNOWN;
uart->port.dev = &serial8250_isa_devs->dev;
+ uart->capabilities = uart_config[uart->port.type].flags;
uart_add_one_port(&serial8250_reg, &uart->port);
} else {
uart->port.dev = NULL;
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 4b4968a294b2..f41b4259ecdd 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -973,7 +973,7 @@ ce4100_serial_setup(struct serial_private *priv,
static int
pci_omegapci_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
@@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
+static int pci_eg20t_init(struct pci_dev *dev)
+{
+#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
+ return -ENODEV;
+#else
+ return 0;
+#endif
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
@@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8811,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8812,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8813,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8814,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8027,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8028,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8029,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800C,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800D,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800D,
+ .init = pci_eg20t_init,
+ },
/*
* Cronyx Omega PCI (PLX-chip based)
*/
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8dc0541feecc..f5f6831b0a64 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -50,6 +50,7 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/sizes.h>
@@ -65,6 +66,30 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
+
+#define UART_WA_SAVE_NR 14
+
+static void pl011_lockup_wa(unsigned long data);
+static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
+ ST_UART011_DMAWM,
+ ST_UART011_TIMEOUT,
+ ST_UART011_LCRH_RX,
+ UART011_IBRD,
+ UART011_FBRD,
+ ST_UART011_LCRH_TX,
+ UART011_IFLS,
+ ST_UART011_XFCR,
+ ST_UART011_XON1,
+ ST_UART011_XON2,
+ ST_UART011_XOFF1,
+ ST_UART011_XOFF2,
+ UART011_CR,
+ UART011_IMSC
+};
+
+static u32 uart_wa_regdata[UART_WA_SAVE_NR];
+static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
+
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
@@ -72,6 +97,7 @@ struct vendor_data {
unsigned int lcrh_tx;
unsigned int lcrh_rx;
bool oversampling;
+ bool interrupt_may_hang; /* vendor-specific */
bool dma_threshold;
};
@@ -90,9 +116,12 @@ static struct vendor_data vendor_st = {
.lcrh_tx = ST_UART011_LCRH_TX,
.lcrh_rx = ST_UART011_LCRH_RX,
.oversampling = true,
+ .interrupt_may_hang = true,
.dma_threshold = true,
};
+static struct uart_amba_port *amba_ports[UART_NR];
+
/* Deals with DMA transactions */
struct pl011_sgbuf {
@@ -132,6 +161,7 @@ struct uart_amba_port {
unsigned int lcrh_rx; /* vendor-specific */
bool autorts;
char type[12];
+ bool interrupt_may_hang; /* vendor-specific */
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
bool using_tx_dma;
@@ -1008,6 +1038,68 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
#endif
+/*
+ * pl011_lockup_wa
+ * This workaround aims to break the deadlock situation
+ * when after long transfer over uart in hardware flow
+ * control, uart interrupt registers cannot be cleared.
+ * Hence uart transfer gets blocked.
+ *
+ * It is seen that during such deadlock condition ICR
+ * don't get cleared even on multiple write. This leads
+ * pass_counter to decrease and finally reach zero. This
+ * can be taken as trigger point to run this UART_BT_WA.
+ *
+ */
+static void pl011_lockup_wa(unsigned long data)
+{
+ struct uart_amba_port *uap = amba_ports[0];
+ void __iomem *base = uap->port.membase;
+ struct circ_buf *xmit = &uap->port.state->xmit;
+ struct tty_struct *tty = uap->port.state->port.tty;
+ int buf_empty_retries = 200;
+ int loop;
+
+ /* Stop HCI layer from submitting data for tx */
+ tty->hw_stopped = 1;
+ while (!uart_circ_empty(xmit)) {
+ if (buf_empty_retries-- == 0)
+ break;
+ udelay(100);
+ }
+
+ /* Backup registers */
+ for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
+ uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
+
+ /* Disable UART so that FIFO data is flushed out */
+ writew(0x00, uap->port.membase + UART011_CR);
+
+ /* Soft reset UART module */
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->reset)
+ plat->reset();
+ }
+
+ /* Restore registers */
+ for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
+ writew(uart_wa_regdata[loop] ,
+ uap->port.membase + uart_wa_reg[loop]);
+
+ /* Initialise the old status of the modem signals */
+ uap->old_status = readw(uap->port.membase + UART01x_FR) &
+ UART01x_FR_MODEM_ANY;
+
+ if (readl(base + UART011_MIS) & 0x2)
+ printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
+
+ /* Start Tx/Rx */
+ tty->hw_stopped = 0;
+}
+
static void pl011_stop_tx(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1158,8 +1250,11 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (status & UART011_TXIS)
pl011_tx_chars(uap);
- if (pass_counter-- == 0)
+ if (pass_counter-- == 0) {
+ if (uap->interrupt_may_hang)
+ tasklet_schedule(&pl011_lockup_tlet);
break;
+ }
status = readw(uap->port.membase + UART011_MIS);
} while (status != 0);
@@ -1339,6 +1434,14 @@ static int pl011_startup(struct uart_port *port)
writew(uap->im, uap->port.membase + UART011_IMSC);
spin_unlock_irq(&uap->port.lock);
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->init)
+ plat->init();
+ }
+
return 0;
clk_dis:
@@ -1394,6 +1497,15 @@ static void pl011_shutdown(struct uart_port *port)
* Shut down the clock producer
*/
clk_disable(uap->clk);
+
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->exit)
+ plat->exit();
+ }
+
}
static void
@@ -1700,6 +1812,14 @@ static int __init pl011_console_setup(struct console *co, char *options)
if (!uap)
return -ENODEV;
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->init)
+ plat->init();
+ }
+
uap->port.uartclk = clk_get_rate(uap->clk);
if (options)
@@ -1774,6 +1894,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
uap->fifosize = vendor->fifosize;
+ uap->interrupt_may_hang = vendor->interrupt_may_hang;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index a1a0e55d0807..c0b68b9cad91 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -250,6 +250,20 @@ static void bcm_uart_do_rx(struct uart_port *port)
/* get overrun/fifo empty information from ier
* register */
iestat = bcm_uart_readl(port, UART_IR_REG);
+
+ if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+ unsigned int val;
+
+ /* fifo reset is required to clear
+ * interrupt */
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val |= UART_CTL_RSTRXFIFO_MASK;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
break;
@@ -284,10 +298,6 @@ static void bcm_uart_do_rx(struct uart_port *port)
if (uart_handle_sysrq_char(port, c))
continue;
- if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
- port->icount.overrun++;
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty, c, flag);
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 18f548449c63..96da17868cf3 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -125,7 +125,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
brd->bd_uart_offset = 0x200;
brd->bd_dividend = 921600;
- brd->re_map_membase = ioremap(brd->membase, 0x1000);
+ brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0));
if (!brd->re_map_membase) {
dev_err(&pdev->dev,
"card has no PCI Memory resources, "
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 1bd28450ca40..a764bf99743b 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -421,7 +421,6 @@ static int max3110_main_thread(void *_max)
int ret = 0;
struct circ_buf *xmit = &max->con_xmit;
- init_waitqueue_head(wq);
pr_info(PR_FMT "start main thread\n");
do {
@@ -823,7 +822,7 @@ static int __devinit serial_m3110_probe(struct spi_device *spi)
res = RC_TAG;
ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
if (ret < 0 || res == 0 || res == 0xffff) {
- printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
+ dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)",
res);
ret = -ENODEV;
goto err_get_page;
@@ -838,6 +837,8 @@ static int __devinit serial_m3110_probe(struct spi_device *spi)
max->con_xmit.head = 0;
max->con_xmit.tail = 0;
+ init_waitqueue_head(&max->wq);
+
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
if (IS_ERR(max->main_thread)) {
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
index fb2619f93d84..dd194dc80ee9 100644
--- a/drivers/tty/serial/s5pv210.c
+++ b/drivers/tty/serial/s5pv210.c
@@ -30,7 +30,7 @@ static int s5pv210_serial_setsource(struct uart_port *port,
struct s3c2410_uartcfg *cfg = port->dev->platform_data;
unsigned long ucon = rd_regl(port, S3C2410_UCON);
- if ((cfg->clocks_size) == 1)
+ if (cfg->flags & NO_NEED_CHECK_CLKSRC)
return 0;
if (strcmp(clk->name, "pclk") == 0)
@@ -55,7 +55,7 @@ static int s5pv210_serial_getsource(struct uart_port *port,
clk->divisor = 1;
- if ((cfg->clocks_size) == 1)
+ if (cfg->flags & NO_NEED_CHECK_CLKSRC)
return 0;
switch (ucon & S5PV210_UCON_CLKMASK) {
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 5d01d32e2cf0..ef925d581713 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -555,7 +555,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
static int tty_ldisc_wait_idle(struct tty_struct *tty)
{
int ret;
- ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+ ret = wait_event_timeout(tty_ldisc_idle,
atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
if (ret < 0)
return ret;
@@ -763,6 +763,8 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
if (IS_ERR(ld))
return -1;
+ WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
+
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index e35a17687c05..34e3da5aa72a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev)
* Just re-enable it without affecting the endpoint toggles.
*/
usb_enable_interface(udev, intf, false);
- } else if (!error && !intf->dev.power.in_suspend) {
+ } else if (!error && !intf->dev.power.is_prepared) {
r = usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
if (r < 0)
@@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf)
}
/* Try to rebind the interface */
- if (!intf->dev.power.in_suspend) {
+ if (!intf->dev.power.is_prepared) {
intf->needs_binding = 0;
rc = device_attach(&intf->dev);
if (rc < 0)
@@ -1107,7 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev,
if (intf->condition == USB_INTERFACE_UNBOUND) {
/* Carry out a deferred switch to altsetting 0 */
- if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) {
+ if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) {
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
intf->needs_altsetting0 = 0;
@@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
for (i = n - 1; i >= 0; --i) {
intf = udev->actconfig->interface[i];
status = usb_suspend_interface(udev, intf, msg);
+
+ /* Ignore errors during system sleep transitions */
+ if (!(msg.event & PM_EVENT_AUTO))
+ status = 0;
if (status != 0)
break;
}
}
- if (status == 0)
+ if (status == 0) {
status = usb_suspend_device(udev, msg);
+ /* Again, ignore errors during system sleep transitions */
+ if (!(msg.event & PM_EVENT_AUTO))
+ status = 0;
+ }
+
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 90ae1753dda1..a428aa080a36 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1634,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev)
{
struct usb_device *udev = *pdev;
int i;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
if (!udev) {
pr_debug ("%s nodev\n", __func__);
@@ -1661,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev)
* so that the hardware is now fully quiesced.
*/
dev_dbg (&udev->dev, "unregistering device\n");
+ mutex_lock(hcd->bandwidth_mutex);
usb_disable_device(udev, 0);
+ mutex_unlock(hcd->bandwidth_mutex);
usb_hcd_synchronize_unlinks(udev);
usb_remove_ep_devs(&udev->ep0);
@@ -2362,6 +2365,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
+
+ /* System sleep transitions should never fail */
+ if (!(msg.event & PM_EVENT_AUTO))
+ status = 0;
} else {
/* device has up to 10 msec to fully suspend */
dev_dbg(&udev->dev, "usb %ssuspend\n",
@@ -2611,16 +2618,15 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
struct usb_device *hdev = hub->hdev;
unsigned port1;
- /* fail if children aren't already suspended */
+ /* Warn if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
udev = hdev->children [port1-1];
if (udev && udev->can_submit) {
- if (!(msg.event & PM_EVENT_AUTO))
- dev_dbg(&intf->dev, "port %d nyet suspended\n",
- port1);
- return -EBUSY;
+ dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
+ if (msg.event & PM_EVENT_AUTO)
+ return -EBUSY;
}
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5701e857392b..64c7ab4702df 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1135,10 +1135,13 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
* Deallocates hcd/hardware state for the endpoints (nuking all or most
* pending urbs) and usbcore state for the interfaces, so that usbcore
* must usb_set_configuration() before any interfaces could be used.
+ *
+ * Must be called with hcd->bandwidth_mutex held.
*/
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
int i;
+ struct usb_hcd *hcd = bus_to_hcd(dev->bus);
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
@@ -1172,6 +1175,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
skip_ep0 ? "non-ep0" : "all");
+ if (hcd->driver->check_bandwidth) {
+ /* First pass: Cancel URBs, leave endpoint pointers intact. */
+ for (i = skip_ep0; i < 16; ++i) {
+ usb_disable_endpoint(dev, i, false);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+ }
+ /* Remove endpoints from the host controller internal state */
+ usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ /* Second pass: remove endpoint pointers */
+ }
for (i = skip_ep0; i < 16; ++i) {
usb_disable_endpoint(dev, i, true);
usb_disable_endpoint(dev, i + USB_DIR_IN, true);
@@ -1727,6 +1740,7 @@ free_interfaces:
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
+ mutex_lock(hcd->bandwidth_mutex);
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device(dev, 1); /* Skip ep0 */
@@ -1739,7 +1753,6 @@ free_interfaces:
* host controller will not allow submissions to dropped endpoints. If
* this call fails, the device state is unchanged.
*/
- mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c
index 98cc8a13169c..aa248c2f2c60 100644
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -44,7 +44,6 @@ static int ehci_ath79_init(struct usb_hcd *hcd)
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct platform_device *pdev = to_platform_device(hcd->self.controller);
const struct platform_device_id *id;
- int hclength;
int ret;
id = platform_get_device_id(pdev);
@@ -53,20 +52,23 @@ static int ehci_ath79_init(struct usb_hcd *hcd)
return -EINVAL;
}
- hclength = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
switch (id->driver_data) {
case EHCI_ATH79_IP_V1:
ehci->has_synopsys_hc_bug = 1;
ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + hclength;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci,
+ ehci_readl(ehci, &ehci->caps->hc_capbase));
break;
case EHCI_ATH79_IP_V2:
hcd->has_tt = 1;
ehci->caps = hcd->regs + 0x100;
- ehci->regs = hcd->regs + 0x100 + hclength;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(ehci,
+ ehci_readl(ehci, &ehci->caps->hc_capbase));
break;
default:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b435ed67dd5c..f8030ee928e8 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1,4 +1,8 @@
/*
+ * Enhanced Host Controller Interface (EHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
* Copyright (c) 2000-2004 by David Brownell
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c9e6e454c625..55d3d5859ac5 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1555,7 +1555,7 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
/* We need to forcefully reclaim the slot since some transfers never
return, e.g. interrupt transfers and NAKed bulk transfers. */
- if (usb_pipebulk(urb->pipe)) {
+ if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
skip_map |= (1 << qh->slot);
reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9aa10bdf3918..f9cf3f04b742 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1,5 +1,7 @@
/*
- * OHCI HCD (Host Controller Driver) for USB.
+ * Open Host Controller Interface (OHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index db6f8b9c19b6..4586369dda00 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2517,6 +2517,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&r8a66597->child_device);
hcd->rsrc_start = res->start;
+ hcd->has_tt = 1;
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0f8e1d29a858..fcb7f7efc86d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1215,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
/* dig out max burst from ep companion desc */
max_packet = ep->ss_ep_comp.bMaxBurst;
- if (!max_packet)
- xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n");
ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
break;
case USB_SPEED_HIGH:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 17541d09eabb..cb16de213f64 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,9 @@
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+#define PCI_VENDOR_ID_ETRON 0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67 0x7023
+
static const char hcd_name[] = "xhci_hcd";
/* called after powerup, by probe or system-pm "wakeup" */
@@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64;
}
+ if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+ pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+ }
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 800f417c7309..70cacbbe7fb9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1733,6 +1733,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
frame->status = -EOVERFLOW;
skip_td = true;
break;
+ case COMP_DEV_ERR:
case COMP_STALL:
frame->status = -EPROTO;
skip_td = true;
@@ -1767,9 +1768,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
}
}
- if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
- *status = 0;
-
return finish_td(xhci, td, event_trb, event, ep, status, false);
}
@@ -1787,8 +1785,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
idx = urb_priv->td_cnt;
frame = &td->urb->iso_frame_desc[idx];
- /* The transfer is partly done */
- *status = -EXDEV;
+ /* The transfer is partly done. */
frame->status = -EXDEV;
/* calc actual length */
@@ -2016,6 +2013,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
ep_index);
goto cleanup;
+ case COMP_DEV_ERR:
+ xhci_warn(xhci, "WARN: detect an incompatible device");
+ status = -EPROTO;
+ break;
case COMP_MISSED_INT:
/*
* When encounter missed service error, one or more isoc tds
@@ -2063,6 +2064,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Is this a TRB in the currently executing TD? */
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, event_dma);
+
+ /*
+ * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
+ * is not in the current TD pointed by ep_ring->dequeue because
+ * that the hardware dequeue pointer still at the previous TRB
+ * of the current TD. The previous TRB maybe a Link TD or the
+ * last TRB of the previous TD. The command completion handle
+ * will take care the rest.
+ */
+ if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+ ret = 0;
+ goto cleanup;
+ }
+
if (!event_seg) {
if (!ep->skip ||
!usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
@@ -2158,6 +2173,11 @@ cleanup:
urb->transfer_buffer_length,
status);
spin_unlock(&xhci->lock);
+ /* EHCI, UHCI, and OHCI always unconditionally set the
+ * urb->status of an isochronous endpoint to 0.
+ */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ status = 0;
usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
spin_lock(&xhci->lock);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06e7023258d0..f5fe1ac301ab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
msleep(100);
spin_lock_irq(&xhci->lock);
+ if (xhci->quirks & XHCI_RESET_ON_RESUME)
+ hibernated = true;
if (!hibernated) {
/* step 1: restore register */
@@ -1401,6 +1403,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
u32 added_ctxs;
unsigned int last_ctx;
u32 new_add_flags, new_drop_flags, new_slot_info;
+ struct xhci_virt_device *virt_dev;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
@@ -1425,11 +1428,25 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
return 0;
}
- in_ctx = xhci->devs[udev->slot_id]->in_ctx;
- out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ virt_dev = xhci->devs[udev->slot_id];
+ in_ctx = virt_dev->in_ctx;
+ out_ctx = virt_dev->out_ctx;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+
+ /* If this endpoint is already in use, and the upper layers are trying
+ * to add it again without dropping it, reject the addition.
+ */
+ if (virt_dev->eps[ep_index].ring &&
+ !(le32_to_cpu(ctrl_ctx->drop_flags) &
+ xhci_get_endpoint_flag(&ep->desc))) {
+ xhci_warn(xhci, "Trying to add endpoint 0x%x "
+ "without dropping it.\n",
+ (unsigned int) ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
@@ -1445,8 +1462,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
* process context, not interrupt context (or so documenation
* for usb_set_interface() and usb_set_configuration() claim).
*/
- if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
- udev, ep, GFP_NOIO) < 0) {
+ if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
__func__, ep->desc.bEndpointAddress);
return -ENOMEM;
@@ -1537,6 +1553,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
"and endpoint is not disabled.\n");
ret = -EINVAL;
break;
+ case COMP_DEV_ERR:
+ dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint "
+ "configure command.\n");
+ ret = -ENODEV;
+ break;
case COMP_SUCCESS:
dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
ret = 0;
@@ -1571,6 +1592,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
ret = -EINVAL;
break;
+ case COMP_DEV_ERR:
+ dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate "
+ "context command.\n");
+ ret = -ENODEV;
+ break;
case COMP_MEL_ERR:
/* Max Exit Latency too large error */
dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
@@ -2853,6 +2879,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
dev_warn(&udev->dev, "Device not responding to set address.\n");
ret = -EPROTO;
break;
+ case COMP_DEV_ERR:
+ dev_warn(&udev->dev, "ERROR: Incompatible device for address "
+ "device command.\n");
+ ret = -ENODEV;
+ break;
case COMP_SUCCESS:
xhci_dbg(xhci, "Successful Address Device command\n");
break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7d1ea3bf5e1f..d8bbf5ccb10d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -874,6 +874,8 @@ struct xhci_transfer_event {
#define COMP_PING_ERR 20
/* Event Ring is full */
#define COMP_ER_FULL 21
+/* Incompatible Device Error */
+#define COMP_DEV_ERR 22
/* Missed Service Error - HC couldn't service an isoc ep within interval */
#define COMP_MISSED_INT 23
/* Successfully stopped command ring */
@@ -1308,6 +1310,7 @@ struct xhci_hcd {
*/
#define XHCI_EP_LIMIT_QUIRK (1 << 5)
#define XHCI_BROKEN_MSI (1 << 6)
+#define XHCI_RESET_ON_RESUME (1 << 7)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0a50a35e1853..6aeb363e63e7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1524,6 +1524,12 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep)
csr = musb_readw(epio, MUSB_TXCSR);
if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+ /*
+ * Setting both TXPKTRDY and FLUSHFIFO makes controller
+ * to interrupt current FIFO loading, but not flushing
+ * the already loaded ones.
+ */
+ csr &= ~MUSB_TXCSR_TXPKTRDY;
musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
musb_writew(epio, MUSB_TXCSR, csr);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 7295e316bdfc..8b2473fa0f47 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1575,7 +1575,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* even if there was an error, we did the dma
* for iso_frame_desc->length
*/
- if (d->status != EILSEQ && d->status != -EOVERFLOW)
+ if (d->status != -EILSEQ && d->status != -EOVERFLOW)
d->status = 0;
if (++qh->iso_idx >= urb->number_of_packets)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 162728977553..2e06b90aa1f8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -179,6 +179,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -848,7 +849,8 @@ static const char *ftdi_chip_name[] = {
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
[FT2232H] = "FT2232H",
- [FT4232H] = "FT4232H"
+ [FT4232H] = "FT4232H",
+ [FT232H] = "FT232H"
};
@@ -1168,6 +1170,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
break;
case FT2232H: /* FT2232H chip */
case FT4232H: /* FT4232H chip */
+ case FT232H: /* FT232H chip */
if ((baud <= 12000000) & (baud >= 1200)) {
div_value = ftdi_2232h_baud_to_divisor(baud);
} else if (baud < 1200) {
@@ -1429,9 +1432,12 @@ static void ftdi_determine_type(struct usb_serial_port *port)
} else if (version < 0x600) {
/* Assume it's an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
- } else {
- /* Assume it's an FT232R */
+ } else if (version < 0x900) {
+ /* Assume it's an FT232RL */
priv->chip_type = FT232RL;
+ } else {
+ /* Assume it's an FT232H */
+ priv->chip_type = FT232H;
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
}
@@ -1559,7 +1565,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H)) {
+ priv->chip_type == FT4232H ||
+ priv->chip_type == FT232H)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
@@ -1580,7 +1587,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H) {
+ priv->chip_type == FT4232H ||
+ priv->chip_type == FT232H) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -2212,6 +2220,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
case FT232RL:
case FT2232H:
case FT4232H:
+ case FT232H:
len = 2;
break;
default:
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 213fe3d61282..19584faa86f9 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -156,7 +156,8 @@ enum ftdi_chip_type {
FT2232C = 4,
FT232RL = 5,
FT2232H = 6,
- FT4232H = 7
+ FT4232H = 7,
+ FT232H = 8
};
enum ftdi_sio_baudrate {
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ab1fcdf3c378..19156d1049fe 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,6 +22,7 @@
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */
#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index c6d92a530086..ea8445689c85 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1745,6 +1745,7 @@ static int ti_download_firmware(struct ti_device *tdev)
}
if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
+ release_firmware(fw_p);
return -ENOENT;
}
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 022f9eb0b7bf..9536d386bb38 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -535,8 +535,7 @@ config I6300ESB_WDT
config INTEL_SCU_WATCHDOG
bool "Intel SCU Watchdog for Mobile Platforms"
- depends on WATCHDOG
- depends on INTEL_SCU_IPC
+ depends on X86_MRST
---help---
Hardware driver for the watchdog time built into the Intel SCU
for Intel Mobile Platforms.
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 750bc5281d79..4ca5d40304b2 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -448,7 +448,7 @@ static void __exit at32_wdt_exit(void)
}
module_exit(at32_wdt_exit);
-MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 29a7cd4b90c8..b146082bd85a 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -329,4 +329,4 @@ MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
MODULE_DESCRIPTION("GE watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform: gef_wdt");
+MODULE_ALIAS("platform:gef_wdt");
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 919bdd16136f..ba4386066a42 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -42,7 +42,6 @@
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sfi.h>
-#include <linux/types.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/intel_scu_ipc.h>
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 1479dc4d6129..0430e093b1a0 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,23 +66,18 @@ static struct {
int default_ticks;
unsigned long inuse;
unsigned gpio;
- int gstate;
+ unsigned int gstate;
} mtx1_wdt_device;
static void mtx1_wdt_trigger(unsigned long unused)
{
- u32 tmp;
-
spin_lock(&mtx1_wdt_device.lock);
if (mtx1_wdt_device.running)
ticks--;
/* toggle wdt gpio */
- mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
- if (mtx1_wdt_device.gstate)
- gpio_direction_output(mtx1_wdt_device.gpio, 1);
- else
- gpio_direction_input(mtx1_wdt_device.gpio);
+ mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate;
+ gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate);
if (mtx1_wdt_device.queue && ticks)
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -105,7 +100,7 @@ static void mtx1_wdt_start(void)
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
mtx1_wdt_device.gstate = 1;
- gpio_direction_output(mtx1_wdt_device.gpio, 1);
+ gpio_set_value(mtx1_wdt_device.gpio, 1);
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
}
mtx1_wdt_device.running++;
@@ -120,7 +115,7 @@ static int mtx1_wdt_stop(void)
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
mtx1_wdt_device.gstate = 0;
- gpio_direction_output(mtx1_wdt_device.gpio, 0);
+ gpio_set_value(mtx1_wdt_device.gpio, 0);
}
ticks = mtx1_wdt_device.default_ticks;
spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
@@ -214,6 +209,12 @@ static int __devinit mtx1_wdt_probe(struct platform_device *pdev)
int ret;
mtx1_wdt_device.gpio = pdev->resource[0].start;
+ ret = gpio_request_one(mtx1_wdt_device.gpio,
+ GPIOF_OUT_INIT_HIGH, "mtx1-wdt");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request gpio");
+ return ret;
+ }
spin_lock_init(&mtx1_wdt_device.lock);
init_completion(&mtx1_wdt_device.stop);
@@ -239,11 +240,13 @@ static int __devexit mtx1_wdt_remove(struct platform_device *pdev)
mtx1_wdt_device.queue = 0;
wait_for_completion(&mtx1_wdt_device.stop);
}
+
+ gpio_free(mtx1_wdt_device.gpio);
misc_deregister(&mtx1_wdt_misc);
return 0;
}
-static struct platform_driver mtx1_wdt = {
+static struct platform_driver mtx1_wdt_driver = {
.probe = mtx1_wdt_probe,
.remove = __devexit_p(mtx1_wdt_remove),
.driver.name = "mtx1-wdt",
@@ -252,12 +255,12 @@ static struct platform_driver mtx1_wdt = {
static int __init mtx1_wdt_init(void)
{
- return platform_driver_register(&mtx1_wdt);
+ return platform_driver_register(&mtx1_wdt_driver);
}
static void __exit mtx1_wdt_exit(void)
{
- platform_driver_unregister(&mtx1_wdt);
+ platform_driver_unregister(&mtx1_wdt_driver);
}
module_init(mtx1_wdt_init);
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 8c4b2d5bb7da..871caea4e1c6 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -320,6 +320,11 @@ static int __devinit wm831x_wdt_probe(struct platform_device *pdev)
struct wm831x_watchdog_pdata *pdata;
int reg, ret;
+ if (wm831x) {
+ dev_err(&pdev->dev, "wm831x watchdog already registered\n");
+ return -EBUSY;
+ }
+
wm831x = dev_get_drvdata(pdev->dev.parent);
ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);