diff options
Diffstat (limited to 'drivers/net/wan/sdla_fr.c')
| -rw-r--r-- | drivers/net/wan/sdla_fr.c | 5061 |
1 files changed, 0 insertions, 5061 deletions
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c deleted file mode 100644 index 7f1ce9d4333e..000000000000 --- a/drivers/net/wan/sdla_fr.c +++ /dev/null @@ -1,5061 +0,0 @@ -/***************************************************************************** -* sdla_fr.c WANPIPE(tm) Multiprotocol WAN Link Driver. Frame relay module. -* -* Author(s): Nenad Corbic <ncorbic@sangoma.com> -* Gideon Hack -* -* Copyright: (c) 1995-2001 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Nov 23, 2000 Nenad Corbic o Added support for 2.4.X kernels -* Nov 15, 2000 David Rokavarg -* Nenad Corbic o Added frame relay bridging support. -* Original code from Mark Wells and Kristian Hoffmann has -* been integrated into the frame relay driver. -* Nov 13, 2000 Nenad Corbic o Added true interface type encoding option. -* Tcpdump doesn't support Frame Relay inteface -* types, to fix this true type option will set -* the interface type to RAW IP mode. -* Nov 07, 2000 Nenad Corbic o Added security features for UDP debugging: -* Deny all and specify allowed requests. -* Nov 06, 2000 Nenad Corbic o Wanpipe interfaces conform to raw packet interfaces. -* Moved the if_header into the if_send() routine. -* The if_header() was breaking the libpcap -* support. i.e. support for tcpdump, ethereal ... -* Oct 12. 2000 Nenad Corbic o Added error message in fr_configure -* Jul 31, 2000 Nenad Corbic o Fixed the Router UP Time. -* Apr 28, 2000 Nenad Corbic o Added the option to shutdown an interface -* when the channel gets disconnected. -* Apr 28, 2000 Nenad Corbic o Added M.Grants patch: disallow duplicate -* interface setups. -* Apr 25, 2000 Nenad Corbic o Added M.Grants patch: dynamically add/remove -* new dlcis/interfaces. -* Mar 23, 2000 Nenad Corbic o Improved task queue, bh handling. -* Mar 16, 2000 Nenad Corbic o Added Inverse ARP support -* Mar 13, 2000 Nenad Corbic o Added new socket API support. -* Mar 06, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery. -* Feb 24, 2000 Nenad Corbic o Fixed up FT1 UDP debugging problem. -* Dev 15, 1999 Nenad Corbic o Fixed up header files for 2.0.X kernels -* -* Nov 08, 1999 Nenad Corbic o Combined all debug UDP calls into one function -* o Removed the ARP support. This has to be done -* in the next version. -* o Only a Node can implement NO signalling. -* Initialize DLCI during if_open() if NO -* signalling. -* o Took out IPX support, implement in next -* version -* Sep 29, 1999 Nenad Corbic o Added SMP support and changed the update -* function to use timer interrupt. -* o Fixed the CIR bug: Set the value of BC -* to CIR when the CIR is enabled. -* o Updated comments, statistics and tracing. -* Jun 02, 1999 Gideon Hack o Updated for S514 support. -* Sep 18, 1998 Jaspreet Singh o Updated for 2.2.X kernels. -* Jul 31, 1998 Jaspreet Singh o Removed wpf_poll routine. The channel/DLCI -* status is received through an event interrupt. -* Jul 08, 1998 David Fong o Added inverse ARP support. -* Mar 26, 1997 Jaspreet Singh o Returning return codes for failed UDP cmds. -* Jan 28, 1997 Jaspreet Singh o Improved handling of inactive DLCIs. -* Dec 30, 1997 Jaspreet Singh o Replaced dev_tint() with mark_bh(NET_BH) -* Dec 16, 1997 Jaspreet Singh o Implemented Multiple IPX support. -* Nov 26, 1997 Jaspreet Singh o Improved load sharing with multiple boards -* o Added Cli() to protect enabling of interrupts -* while polling is called. -* Nov 24, 1997 Jaspreet Singh o Added counters to avoid enabling of interrupts -* when they have been disabled by another -* interface or routine (eg. wpf_poll). -* Nov 06, 1997 Jaspreet Singh o Added INTR_TEST_MODE to avoid polling -* routine disable interrupts during interrupt -* testing. -* Oct 20, 1997 Jaspreet Singh o Added hooks in for Router UP time. -* Oct 16, 1997 Jaspreet Singh o The critical flag is used to maintain flow -* control by avoiding RACE conditions. The -* cli() and restore_flags() are taken out. -* The fr_channel structure is appended for -* Driver Statistics. -* Oct 15, 1997 Farhan Thawar o updated if_send() and receive for IPX -* Aug 29, 1997 Farhan Thawar o Removed most of the cli() and sti() -* o Abstracted the UDP management stuff -* o Now use tbusy and critical more intelligently -* Jul 21, 1997 Jaspreet Singh o Can configure T391, T392, N391, N392 & N393 -* through router.conf. -* o Protected calls to sdla_peek() by adDing -* save_flags(), cli() and restore_flags(). -* o Added error message for Inactive DLCIs in -* fr_event() and update_chan_state(). -* o Fixed freeing up of buffers using kfree() -* when packets are received. -* Jul 07, 1997 Jaspreet Singh o Added configurable TTL for UDP packets -* o Added ability to discard multicast and -* broadcast source addressed packets -* Jun 27, 1997 Jaspreet Singh o Added FT1 monitor capabilities -* New case (0x44) statement in if_send routine -* Added a global variable rCount to keep track -* of FT1 status enabled on the board. -* May 29, 1997 Jaspreet Singh o Fixed major Flow Control Problem -* With multiple boards a problem was seen where -* the second board always stopped transmitting -* packet after running for a while. The code -* got into a stage where the interrupts were -* disabled and dev->tbusy was set to 1. -* This caused the If_send() routine to get into -* the if clause for it(0,dev->tbusy) -* forever. -* The code got into this stage due to an -* interrupt occurring within the if clause for -* set_bit(0,dev->tbusy). Since an interrupt -* disables furhter transmit interrupt and -* makes dev->tbusy = 0, this effect was undone -* by making dev->tbusy = 1 in the if clause. -* The Fix checks to see if Transmit interrupts -* are disabled then do not make dev->tbusy = 1 -* Introduced a global variable: int_occur and -* added tx_int_enabled in the wan_device -* structure. -* May 21, 1997 Jaspreet Singh o Fixed UDP Management for multiple -* boards. -* -* Apr 25, 1997 Farhan Thawar o added UDP Management stuff -* o fixed bug in if_send() and tx_intr() to -* sleep and wakeup all devices -* Mar 11, 1997 Farhan Thawar Version 3.1.1 -* o fixed (+1) bug in fr508_rx_intr() -* o changed if_send() to return 0 if -* wandev.critical() is true -* o free socket buffer in if_send() if -* returning 0 -* o added tx_intr() routine -* Jan 30, 1997 Gene Kozin Version 3.1.0 -* o implemented exec() entry point -* o fixed a bug causing driver configured as -* a FR switch to be stuck in WAN_ -* mode -* Jan 02, 1997 Gene Kozin Initial version. -*****************************************************************************/ - -#include <linux/module.h> -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/string.h> /* inline memset(), etc. */ -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/wanrouter.h> /* WAN router definitions */ -#include <linux/wanpipe.h> /* WANPIPE common user API definitions */ -#include <linux/workqueue.h> -#include <linux/if_arp.h> /* ARPHRD_* defines */ -#include <asm/byteorder.h> /* htons(), etc. */ -#include <asm/io.h> /* for inb(), outb(), etc. */ -#include <linux/time.h> /* for do_gettimeofday */ -#include <linux/in.h> /* sockaddr_in */ -#include <linux/jiffies.h> /* time_after() macro */ -#include <asm/errno.h> - -#include <linux/ip.h> -#include <linux/if.h> - -#include <linux/if_wanpipe_common.h> /* Wanpipe Socket */ -#include <linux/if_wanpipe.h> - -#include <linux/sdla_fr.h> /* frame relay firmware API definitions */ - -#include <asm/uaccess.h> -#include <linux/inetdevice.h> -#include <linux/netdevice.h> - -#include <net/route.h> /* Dynamic Route Creation */ -#include <linux/etherdevice.h> /* eth_type_trans() used for bridging */ -#include <linux/random.h> - -/****** Defines & Macros ****************************************************/ - -#define MAX_CMD_RETRY 10 /* max number of firmware retries */ - -#define FR_HEADER_LEN 8 /* max encapsulation header size */ -#define FR_CHANNEL_MTU 1500 /* unfragmented logical channel MTU */ - -/* Q.922 frame types */ -#define Q922_UI 0x03 /* Unnumbered Info frame */ -#define Q922_XID 0xAF - -/* DLCI configured or not */ -#define DLCI_NOT_CONFIGURED 0x00 -#define DLCI_CONFIG_PENDING 0x01 -#define DLCI_CONFIGURED 0x02 - -/* CIR enabled or not */ -#define CIR_ENABLED 0x00 -#define CIR_DISABLED 0x01 - -#define FRAME_RELAY_API 1 -#define MAX_BH_BUFF 10 - -/* For handle_IPXWAN() */ -#define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b))) - -/****** Data Structures *****************************************************/ - -/* This is an extention of the 'struct device' we create for each network - * interface to keep the rest of channel-specific data. - */ -typedef struct fr_channel -{ - wanpipe_common_t common; - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - unsigned dlci_configured ; /* check whether configured or not */ - unsigned cir_status; /* check whether CIR enabled or not */ - unsigned dlci; /* logical channel number */ - unsigned cir; /* committed information rate */ - unsigned bc; /* committed burst size */ - unsigned be; /* excess burst size */ - unsigned mc; /* multicast support on or off */ - unsigned tx_int_status; /* Transmit Interrupt Status */ - unsigned short pkt_length; /* Packet Length */ - unsigned long router_start_time;/* Router start time in seconds */ - unsigned long tick_counter; /* counter for transmit time out */ - char dev_pending_devtint; /* interface pending dev_tint() */ - void *dlci_int_interface; /* pointer to the DLCI Interface */ - unsigned long IB_addr; /* physical address of Interface Byte */ - unsigned long state_tick; /* time of the last state change */ - unsigned char enable_IPX; /* Enable/Disable the use of IPX */ - unsigned long network_number; /* Internal Network Number for IPX*/ - sdla_t *card; /* -> owner */ - unsigned route_flag; /* Add/Rem dest addr in route tables */ - unsigned inarp; /* Inverse Arp Request status */ - long inarp_ready; /* Ready to send requests */ - int inarp_interval; /* Time between InArp Requests */ - unsigned long inarp_tick; /* InArp jiffies tick counter */ - long interface_down; /* Bring interface down on disconnect */ - struct net_device_stats ifstats; /* interface statistics */ - if_send_stat_t drvstats_if_send; - rx_intr_stat_t drvstats_rx_intr; - pipe_mgmt_stat_t drvstats_gen; - unsigned long router_up_time; - - unsigned short transmit_length; - struct sk_buff *delay_skb; - - bh_data_t *bh_head; /* Circular buffer for chdlc_bh */ - unsigned long tq_working; - volatile int bh_write; - volatile int bh_read; - atomic_t bh_buff_used; - - /* Polling task queue. Each interface - * has its own task queue, which is used - * to defer events from the interrupt */ - struct work_struct fr_poll_work; - struct timer_list fr_arp_timer; - - u32 ip_local; - u32 ip_remote; - long config_dlci; - long unconfig_dlci; - - /* Whether this interface should be setup as a gateway. - * Used by dynamic route setup code */ - u8 gateway; - - /* True interface type */ - u8 true_if_encoding; - u8 fr_header[FR_HEADER_LEN]; - char fr_header_len; - -} fr_channel_t; - -/* Route Flag options */ -#define NO_ROUTE 0x00 -#define ADD_ROUTE 0x01 -#define ROUTE_ADDED 0x02 -#define REMOVE_ROUTE 0x03 -#define ARP_REQ 0x04 - -/* inarp options */ -#define INARP_NONE 0x00 -#define INARP_REQUEST 0x01 -#define INARP_CONFIGURED 0x02 - -/* reasons for enabling the timer interrupt on the adapter */ -#define TMR_INT_ENABLED_UDP 0x01 -#define TMR_INT_ENABLED_UPDATE 0x02 -#define TMR_INT_ENABLED_ARP 0x04 -#define TMR_INT_ENABLED_UPDATE_STATE 0x08 -#define TMR_INT_ENABLED_CONFIG 0x10 -#define TMR_INT_ENABLED_UNCONFIG 0x20 - - -typedef struct dlci_status -{ - unsigned short dlci PACKED; - unsigned char state PACKED; -} dlci_status_t; - -typedef struct dlci_IB_mapping -{ - unsigned short dlci PACKED; - unsigned long addr_value PACKED; -} dlci_IB_mapping_t; - -/* This structure is used for DLCI list Tx interrupt mode. It is used to - enable interrupt bit and set the packet length for transmission - */ -typedef struct fr_dlci_interface -{ - unsigned char gen_interrupt PACKED; - unsigned short packet_length PACKED; - unsigned char reserved PACKED; -} fr_dlci_interface_t; - -/* variable for keeping track of enabling/disabling FT1 monitor status */ -static int rCount = 0; - -extern void disable_irq(unsigned int); -extern void enable_irq(unsigned int); - -/* variable for keeping track of number of interrupts generated during - * interrupt test routine - */ -static int Intr_test_counter; - -/****** Function Prototypes *************************************************/ - -/* WAN link driver entry points. These are called by the WAN router module. */ -static int update(struct wan_device *wandev); -static int new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf); -static int del_if(struct wan_device *wandev, struct net_device *dev); -static void disable_comm (sdla_t *card); - -/* WANPIPE-specific entry points */ -static int wpf_exec(struct sdla *card, void *u_cmd, void *u_data); - -/* Network device interface */ -static int if_init(struct net_device *dev); -static int if_open(struct net_device *dev); -static int if_close(struct net_device *dev); - -static void if_tx_timeout(struct net_device *dev); - -static int if_rebuild_hdr (struct sk_buff *skb); - -static int if_send(struct sk_buff *skb, struct net_device *dev); -static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev, - struct sk_buff *skb); -static struct net_device_stats *if_stats(struct net_device *dev); - -/* Interrupt handlers */ -static void fr_isr(sdla_t *card); -static void rx_intr(sdla_t *card); -static void tx_intr(sdla_t *card); -static void timer_intr(sdla_t *card); -static void spur_intr(sdla_t *card); - -/* Frame relay firmware interface functions */ -static int fr_read_version(sdla_t *card, char *str); -static int fr_configure(sdla_t *card, fr_conf_t *conf); -static int fr_dlci_configure(sdla_t *card, fr_dlc_conf_t *conf, unsigned dlci); -static int fr_init_dlci (sdla_t *card, fr_channel_t *chan); -static int fr_set_intr_mode (sdla_t *card, unsigned mode, unsigned mtu, unsigned short timeout); -static int fr_comm_enable(sdla_t *card); -static void fr_comm_disable(sdla_t *card); -static int fr_get_err_stats(sdla_t *card); -static int fr_get_stats(sdla_t *card); -static int fr_add_dlci(sdla_t *card, int dlci); -static int fr_activate_dlci(sdla_t *card, int dlci); -static int fr_delete_dlci (sdla_t* card, int dlci); -static int fr_issue_isf(sdla_t *card, int isf); -static int fr_send(sdla_t *card, int dlci, unsigned char attr, int len, - void *buf); -static int fr_send_data_header(sdla_t *card, int dlci, unsigned char attr, int len, - void *buf,unsigned char hdr_len); -static unsigned int fr_send_hdr(sdla_t *card, int dlci, unsigned int offset); - -static int check_dlci_config (sdla_t *card, fr_channel_t *chan); -static void initialize_rx_tx_buffers (sdla_t *card); - - -/* Firmware asynchronous event handlers */ -static int fr_event(sdla_t *card, int event, fr_mbox_t *mbox); -static int fr_modem_failure(sdla_t *card, fr_mbox_t *mbox); -static int fr_dlci_change(sdla_t *card, fr_mbox_t *mbox); - -/* Miscellaneous functions */ -static int update_chan_state(struct net_device *dev); -static void set_chan_state(struct net_device *dev, int state); -static struct net_device *find_channel(sdla_t *card, unsigned dlci); -static int is_tx_ready(sdla_t *card, fr_channel_t *chan); -static unsigned int dec_to_uint(unsigned char *str, int len); -static int reply_udp( unsigned char *data, unsigned int mbox_len ); - -static int intr_test( sdla_t* card ); -static void init_chan_statistics( fr_channel_t* chan ); -static void init_global_statistics( sdla_t* card ); -static void read_DLCI_IB_mapping( sdla_t* card, fr_channel_t* chan ); -static int setup_for_delayed_transmit(struct net_device* dev, - struct sk_buff *skb); - -struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev); -static int check_tx_status(sdla_t *card, struct net_device *dev); - -/* Frame Relay Socket API */ -static void trigger_fr_bh (fr_channel_t *); -static void fr_bh(struct net_device *dev); -static int fr_bh_cleanup(struct net_device *dev); -static int bh_enqueue(struct net_device *dev, struct sk_buff *skb); - -static void trigger_fr_poll(struct net_device *dev); -static void fr_poll(struct net_device *dev); -//static void add_gateway(struct net_device *dev); - -static void trigger_unconfig_fr(struct net_device *dev); -static void unconfig_fr (sdla_t *); - -static void trigger_config_fr (sdla_t *); -static void config_fr (sdla_t *); - - -/* Inverse ARP and Dynamic routing functions */ -int process_ARP(arphdr_1490_t *ArpPacket, sdla_t *card, struct net_device *dev); -int is_arp(void *buf); -int send_inarp_request(sdla_t *card, struct net_device *dev); - -static void trigger_fr_arp(struct net_device *dev); -static void fr_arp (unsigned long data); - - -/* Udp management functions */ -static int process_udp_mgmt_pkt(sdla_t *card); -static int udp_pkt_type( struct sk_buff *skb, sdla_t *card ); -static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, - struct sk_buff *skb, int dlci); - -/* IPX functions */ -static void switch_net_numbers(unsigned char *sendpacket, - unsigned long network_number, unsigned char incoming); - -static int handle_IPXWAN(unsigned char *sendpacket, char *devname, - unsigned char enable_IPX, unsigned long network_number); - -/* Lock Functions: SMP supported */ -void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags); -void s508_s514_lock(sdla_t *card, unsigned long *smp_flags); - -unsigned short calc_checksum (char *, int); -static int setup_fr_header(struct sk_buff *skb, - struct net_device* dev, char op_mode); - - -/****** Public Functions ****************************************************/ - -/*============================================================================ - * Frame relay protocol initialization routine. - * - * This routine is called by the main WANPIPE module during setup. At this - * point adapter is completely initialized and firmware is running. - * o read firmware version (to make sure it's alive) - * o configure adapter - * o initialize protocol-specific fields of the adapter data space. - * - * Return: 0 o.k. - * < 0 failure. - */ -int wpf_init(sdla_t *card, wandev_conf_t *conf) -{ - - int err; - fr508_flags_t* flags; - - union - { - char str[80]; - fr_conf_t cfg; - } u; - - fr_buf_info_t* buf_info; - int i; - - - printk(KERN_INFO "\n"); - - /* Verify configuration ID */ - if (conf->config_id != WANCONFIG_FR) { - - printk(KERN_INFO "%s: invalid configuration ID %u!\n", - card->devname, conf->config_id); - return -EINVAL; - - } - - /* Initialize protocol-specific fields of adapter data space */ - switch (card->hw.fwid) { - - case SFID_FR508: - card->mbox = (void*)(card->hw.dpmbase + - FR508_MBOX_OFFS); - card->flags = (void*)(card->hw.dpmbase + - FR508_FLAG_OFFS); - if(card->hw.type == SDLA_S514) { - card->mbox += FR_MB_VECTOR; - card->flags += FR_MB_VECTOR; - } - card->isr = &fr_isr; - break; - - default: - return -EINVAL; - } - - flags = card->flags; - - /* Read firmware version. Note that when adapter initializes, it - * clears the mailbox, so it may appear that the first command was - * executed successfully when in fact it was merely erased. To work - * around this, we execute the first command twice. - */ - - if (fr_read_version(card, NULL) || fr_read_version(card, u.str)) - return -EIO; - - printk(KERN_INFO "%s: running frame relay firmware v%s\n", - card->devname, u.str); - - /* Adjust configuration */ - conf->mtu += FR_HEADER_LEN; - conf->mtu = (conf->mtu >= MIN_LGTH_FR_DATA_CFG) ? - min_t(unsigned int, conf->mtu, FR_MAX_NO_DATA_BYTES_IN_FRAME) : - FR_CHANNEL_MTU + FR_HEADER_LEN; - - conf->bps = min_t(unsigned int, conf->bps, 2048000); - - /* Initialze the configuration structure sent to the board to zero */ - memset(&u.cfg, 0, sizeof(u.cfg)); - - memset(card->u.f.dlci_to_dev_map, 0, sizeof(card->u.f.dlci_to_dev_map)); - - /* Configure adapter firmware */ - - u.cfg.mtu = conf->mtu; - u.cfg.kbps = conf->bps / 1000; - - u.cfg.cir_fwd = u.cfg.cir_bwd = 16; - u.cfg.bc_fwd = u.cfg.bc_bwd = 16; - - u.cfg.options = 0x0000; - printk(KERN_INFO "%s: Global CIR enabled by Default\n", card->devname); - - switch (conf->u.fr.signalling) { - - case WANOPT_FR_ANSI: - u.cfg.options = 0x0000; - break; - - case WANOPT_FR_Q933: - u.cfg.options |= 0x0200; - break; - - case WANOPT_FR_LMI: - u.cfg.options |= 0x0400; - break; - - case WANOPT_NO: - u.cfg.options |= 0x0800; - break; - default: - printk(KERN_INFO "%s: Illegal Signalling option\n", - card->wandev.name); - return -EINVAL; - } - - - card->wandev.signalling = conf->u.fr.signalling; - - if (conf->station == WANOPT_CPE) { - - - if (conf->u.fr.signalling == WANOPT_NO){ - printk(KERN_INFO - "%s: ERROR - For NO signalling, station must be set to Node!", - card->devname); - return -EINVAL; - } - - u.cfg.station = 0; - u.cfg.options |= 0x8000; /* auto config DLCI */ - card->u.f.dlci_num = 0; - - } else { - - u.cfg.station = 1; /* switch emulation mode */ - - /* For switch emulation we have to create a list of dlci(s) - * that will be sent to be global SET_DLCI_CONFIGURATION - * command in fr_configure() routine. - */ - - card->u.f.dlci_num = min_t(unsigned int, max_t(unsigned int, conf->u.fr.dlci_num, 1), 100); - - for ( i = 0; i < card->u.f.dlci_num; i++) { - - card->u.f.node_dlci[i] = (unsigned short) - conf->u.fr.dlci[i] ? conf->u.fr.dlci[i] : 16; - - } - } - - if (conf->clocking == WANOPT_INTERNAL) - u.cfg.port |= 0x0001; - - if (conf->interface == WANOPT_RS232) - u.cfg.port |= 0x0002; - - if (conf->u.fr.t391) - u.cfg.t391 = min_t(unsigned int, conf->u.fr.t391, 30); - else - u.cfg.t391 = 5; - - if (conf->u.fr.t392) - u.cfg.t392 = min_t(unsigned int, conf->u.fr.t392, 30); - else - u.cfg.t392 = 15; - - if (conf->u.fr.n391) - u.cfg.n391 = min_t(unsigned int, conf->u.fr.n391, 255); - else - u.cfg.n391 = 2; - - if (conf->u.fr.n392) - u.cfg.n392 = min_t(unsigned int, conf->u.fr.n392, 10); - else - u.cfg.n392 = 3; - - if (conf->u.fr.n393) - u.cfg.n393 = min_t(unsigned int, conf->u.fr.n393, 10); - else - u.cfg.n393 = 4; - - if (fr_configure(card, &u.cfg)) - return -EIO; - - if (card->hw.type == SDLA_S514) { - - buf_info = (void*)(card->hw.dpmbase + FR_MB_VECTOR + - FR508_RXBC_OFFS); - - card->rxmb = (void*)(buf_info->rse_next + card->hw.dpmbase); - - card->u.f.rxmb_base = - (void*)(buf_info->rse_base + card->hw.dpmbase); - - card->u.f.rxmb_last = - (void*)(buf_info->rse_base + - (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) + - card->hw.dpmbase); - }else{ - buf_info = (void*)(card->hw.dpmbase + FR508_RXBC_OFFS); - - card->rxmb = (void*)(buf_info->rse_next - - FR_MB_VECTOR + card->hw.dpmbase); - - card->u.f.rxmb_base = - (void*)(buf_info->rse_base - - FR_MB_VECTOR + card->hw.dpmbase); - - card->u.f.rxmb_last = - (void*)(buf_info->rse_base + - (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) - - FR_MB_VECTOR + card->hw.dpmbase); - } - - card->u.f.rx_base = buf_info->buf_base; - card->u.f.rx_top = buf_info->buf_top; - - card->u.f.tx_interrupts_pending = 0; - - card->wandev.mtu = conf->mtu; - card->wandev.bps = conf->bps; - card->wandev.interface = conf->interface; - card->wandev.clocking = conf->clocking; - card->wandev.station = conf->station; - card->poll = NULL; - card->exec = &wpf_exec; - card->wandev.update = &update; - card->wandev.new_if = &new_if; - card->wandev.del_if = &del_if; - card->wandev.state = WAN_DISCONNECTED; - card->wandev.ttl = conf->ttl; - card->wandev.udp_port = conf->udp_port; - card->disable_comm = &disable_comm; - card->u.f.arp_dev = NULL; - - /* Intialize global statistics for a card */ - init_global_statistics( card ); - - card->TracingEnabled = 0; - - /* Interrupt Test */ - Intr_test_counter = 0; - card->intr_mode = INTR_TEST_MODE; - err = intr_test( card ); - - printk(KERN_INFO "%s: End of Interrupt Test rc=0x%x count=%i\n", - card->devname,err,Intr_test_counter); - - if (err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) { - printk(KERN_ERR "%s: Interrupt Test Failed, Counter: %i\n", - card->devname, Intr_test_counter); - printk(KERN_ERR "Please choose another interrupt\n"); - err = -EIO; - return err; - } - - printk(KERN_INFO "%s: Interrupt Test Passed, Counter: %i\n", - card->devname, Intr_test_counter); - - - /* Apr 28 2000. Nenad Corbic - * Enable commnunications here, not in if_open or new_if, since - * interfaces come down when the link is disconnected. - */ - - /* If you enable comms and then set ints, you get a Tx int as you - * perform the SET_INT_TRIGGERS command. So, we only set int - * triggers and then adjust the interrupt mask (to disable Tx ints) - * before enabling comms. - */ - if (fr_set_intr_mode(card, (FR_INTR_RXRDY | FR_INTR_TXRDY | - FR_INTR_DLC | FR_INTR_TIMER | FR_INTR_TX_MULT_DLCIs) , - card->wandev.mtu, 0)) { - return -EIO; - } - - flags->imask &= ~(FR_INTR_TXRDY | FR_INTR_TIMER); - - if (fr_comm_enable(card)) { - return -EIO; - } - wanpipe_set_state(card, WAN_CONNECTED); - spin_lock_init(&card->u.f.if_send_lock); - - printk(KERN_INFO "\n"); - - return 0; -} - -/******* WAN Device Driver Entry Points *************************************/ - -/*============================================================================ - * Update device status & statistics. - */ -static int update(struct wan_device* wandev) -{ - volatile sdla_t* card; - unsigned long timeout; - fr508_flags_t* flags; - - /* sanity checks */ - if ((wandev == NULL) || (wandev->private == NULL)) - return -EFAULT; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - card = wandev->private; - flags = card->flags; - - - card->u.f.update_comms_stats = 1; - card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UPDATE; - flags->imask |= FR_INTR_TIMER; - timeout = jiffies; - for(;;) { - if(card->u.f.update_comms_stats == 0) - break; - if (time_after(jiffies, timeout + 1 * HZ)){ - card->u.f.update_comms_stats = 0; - return -EAGAIN; - } - } - - return 0; -} - -/*============================================================================ - * Create new logical channel. - * This routine is called by the router when ROUTER_IFNEW IOCTL is being - * handled. - * o parse media- and hardware-specific configuration - * o make sure that a new channel can be created - * o allocate resources, if necessary - * o prepare network device structure for registaration. - * - * Return: 0 o.k. - * < 0 failure (channel will not be created) - */ -static int new_if(struct wan_device* wandev, struct net_device* dev, - wanif_conf_t* conf) -{ - sdla_t* card = wandev->private; - fr_channel_t* chan; - int dlci = 0; - int err = 0; - - - if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) { - - printk(KERN_INFO "%s: Invalid interface name!\n", - card->devname); - return -EINVAL; - } - - /* allocate and initialize private data */ - chan = kmalloc(sizeof(fr_channel_t), GFP_KERNEL); - - if (chan == NULL) - return -ENOMEM; - - memset(chan, 0, sizeof(fr_channel_t)); - strcpy(chan->name, conf->name); - chan->card = card; - - /* verify media address */ - if (isdigit(conf->addr[0])) { - - dlci = dec_to_uint(conf->addr, 0); - - if (dlci && (dlci <= HIGHEST_VALID_DLCI)) { - - chan->dlci = dlci; - - } else { - - printk(KERN_ERR - "%s: Invalid DLCI %u on interface %s!\n", - wandev->name, dlci, chan->name); - err = -EINVAL; - } - - } else { - printk(KERN_ERR - "%s: Invalid media address on interface %s!\n", - wandev->name, chan->name); - err = -EINVAL; - } - - if ((chan->true_if_encoding = conf->true_if_encoding) == WANOPT_YES){ - printk(KERN_INFO - "%s: Enabling, true interface type encoding.\n", - card->devname); - } - - - - /* Setup wanpipe as a router (WANPIPE) even if it is - * a bridged DLCI, or as an API - */ - if (strcmp(conf->usedby, "WANPIPE") == 0 || - strcmp(conf->usedby, "BRIDGE") == 0 || - strcmp(conf->usedby, "BRIDGE_N") == 0){ - - if(strcmp(conf->usedby, "WANPIPE") == 0){ - chan->common.usedby = WANPIPE; - - printk(KERN_INFO "%s: Running in WANPIPE mode.\n", - card->devname); - - }else if(strcmp(conf->usedby, "BRIDGE") == 0){ - - chan->common.usedby = BRIDGE; - - printk(KERN_INFO "%s: Running in WANPIPE (BRIDGE) mode.\n", - card->devname); - }else if( strcmp(conf->usedby, "BRIDGE_N") == 0 ){ - - chan->common.usedby = BRIDGE_NODE; - - printk(KERN_INFO "%s: Running in WANPIPE (BRIDGE_NODE) mode.\n", - card->devname); - } - - if (!err){ - /* Dynamic interface configuration option. - * On disconnect, if the options is selected, - * the interface will be brought down */ - if (conf->if_down == WANOPT_YES){ - set_bit(DYN_OPT_ON,&chan->interface_down); - printk(KERN_INFO - "%s: Dynamic interface configuration enabled.\n", - card->devname); - } - } - - } else if(strcmp(conf->usedby, "API") == 0){ - - chan->common.usedby = API; - printk(KERN_INFO "%s: Running in API mode.\n", - wandev->name); - } - - if (err) { - - kfree(chan); - return err; - } - - /* place cir,be,bc and other channel specific information into the - * chan structure - */ - if (conf->cir) { - - chan->cir = max_t(unsigned int, 1, - min_t(unsigned int, conf->cir, 512)); - chan->cir_status = CIR_ENABLED; - - - /* If CIR is enabled, force BC to equal CIR - * this solves number of potential problems if CIR is - * set and BC is not - */ - chan->bc = chan->cir; - - if (conf->be){ - chan->be = max_t(unsigned int, - 0, min_t(unsigned int, conf->be, 511)); - }else{ - conf->be = 0; - } - - printk (KERN_INFO "%s: CIR enabled for DLCI %i \n", - wandev->name,chan->dlci); - printk (KERN_INFO "%s: CIR = %i ; BC = %i ; BE = %i\n", - wandev->name,chan->cir,chan->bc,chan->be); - - - }else{ - chan->cir_status = CIR_DISABLED; - printk (KERN_INFO "%s: CIR disabled for DLCI %i\n", - wandev->name,chan->dlci); - } - - chan->mc = conf->mc; - - if (conf->inarp == WANOPT_YES){ - printk(KERN_INFO "%s: Inverse ARP Support Enabled\n",card->devname); - chan->inarp = conf->inarp ? INARP_REQUEST : INARP_NONE; - chan->inarp_interval = conf->inarp_interval ? conf->inarp_interval : 10; - }else{ - printk(KERN_INFO "%s: Inverse ARP Support Disabled\n",card->devname); - chan->inarp = INARP_NONE; - chan->inarp_interval = 10; - } - - - chan->dlci_configured = DLCI_NOT_CONFIGURED; - - - /*FIXME: IPX disabled in this WANPIPE version */ - if (conf->enable_IPX == WANOPT_YES){ - printk(KERN_INFO "%s: ERROR - This version of WANPIPE doesn't support IPX\n", - card->devname); - kfree(chan); - return -EINVAL; - }else{ - chan->enable_IPX = WANOPT_NO; - } - - if (conf->network_number){ - chan->network_number = conf->network_number; - }else{ - chan->network_number = 0xDEADBEEF; - } - - chan->route_flag = NO_ROUTE; - - init_chan_statistics(chan); - - chan->transmit_length = 0; - - /* prepare network device data space for registration */ - strcpy(dev->name,chan->name); - - dev->init = &if_init; - dev->priv = chan; - - /* Initialize FR Polling Task Queue - * We need a poll routine for each network - * interface. - */ - INIT_WORK(&chan->fr_poll_work, (void *)fr_poll, dev); - - init_timer(&chan->fr_arp_timer); - chan->fr_arp_timer.data=(unsigned long)dev; - chan->fr_arp_timer.function = fr_arp; - - wandev->new_if_cnt++; - - /* Tells us that if this interface is a - * gateway or not */ - if ((chan->gateway = conf->gateway) == WANOPT_YES){ - printk(KERN_INFO "%s: Interface %s is set as a gateway.\n", - card->devname,dev->name); - } - - /* M. Grant Patch Apr 28 2000 - * Disallow duplicate dlci configurations. */ - if (card->u.f.dlci_to_dev_map[chan->dlci] != NULL) { - kfree(chan); - return -EBUSY; - } - - /* Configure this dlci at a later date, when - * the interface comes up. i.e. when if_open() - * executes */ - set_bit(0,&chan->config_dlci); - - printk(KERN_INFO "\n"); - - return 0; -} - -/*============================================================================ - * Delete logical channel. - */ -static int del_if(struct wan_device* wandev, struct net_device* dev) -{ - fr_channel_t* chan = dev->priv; - unsigned long smp_flags=0; - - /* This interface is dead, make sure the - * ARP timer is stopped */ - del_timer(&chan->fr_arp_timer); - - /* If we are a NODE, we must unconfigure this DLCI - * Trigger an unconfigure command that will - * be executed in timer interrupt. We must wait - * for the command to complete. */ - trigger_unconfig_fr(dev); - - lock_adapter_irq(&wandev->lock, &smp_flags); - wandev->new_if_cnt--; - unlock_adapter_irq(&wandev->lock, &smp_flags); - - return 0; -} - - -/*===================================================================== - * disable_comm - * - * Description: - * Disable communications. - * This code runs in shutdown (sdlamain.c) - * under critical flag. Therefore it is not - * necessary to set a critical flag here - * - * Usage: - * Commnunications are disabled only on a card - * shutdown. - */ - -static void disable_comm (sdla_t *card) -{ - printk(KERN_INFO "%s: Disabling Communications!\n", - card->devname); - fr_comm_disable(card); -} - -/****** WANPIPE-specific entry points ***************************************/ - -/*============================================================================ - * Execute adapter interface command. - */ -static int wpf_exec (struct sdla* card, void* u_cmd, void* u_data) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err, len; - fr_cmd_t cmd; - - if(copy_from_user((void*)&cmd, u_cmd, sizeof(cmd))) - return -EFAULT; - - /* execute command */ - do - { - memcpy(&mbox->cmd, &cmd, sizeof(cmd)); - - if (cmd.length){ - if( copy_from_user((void*)&mbox->data, u_data, cmd.length)) - return -EFAULT; - } - - if (sdla_exec(mbox)) - err = mbox->cmd.result; - - else return -EIO; - - } while (err && retry-- && fr_event(card, err, mbox)); - - /* return result */ - if (copy_to_user(u_cmd, (void*)&mbox->cmd, sizeof(fr_cmd_t))) - return -EFAULT; - - len = mbox->cmd.length; - - if (len && u_data && !copy_to_user(u_data, (void*)&mbox->data, len)) - return -EFAULT; - return 0; -} - -/****** Network Device Interface ********************************************/ - -/*============================================================================ - * Initialize Linux network interface. - * - * This routine is called only once for each interface, during Linux network - * interface registration. Returning anything but zero will fail interface - * registration. - */ -static int if_init(struct net_device* dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - struct wan_device* wandev = &card->wandev; - - /* Initialize device driver entry points */ - dev->open = &if_open; - dev->stop = &if_close; - dev->hard_header = NULL; - dev->rebuild_header = &if_rebuild_hdr; - dev->hard_start_xmit = &if_send; - dev->get_stats = &if_stats; - dev->tx_timeout = &if_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - - if (chan->common.usedby == WANPIPE || chan->common.usedby == API){ - - /* Initialize media-specific parameters */ - if (chan->true_if_encoding){ - dev->type = ARPHRD_DLCI; /* This breaks tcpdump */ - }else{ - dev->type = ARPHRD_PPP; /* ARP h/w type */ - } - - dev->flags |= IFF_POINTOPOINT; - dev->flags |= IFF_NOARP; - - /* Enable Multicast addressing */ - if (chan->mc == WANOPT_YES){ - dev->flags |= IFF_MULTICAST; - } - - dev->mtu = wandev->mtu - FR_HEADER_LEN; - /* For an API, the maximum number of bytes that the stack will pass - to the driver is (dev->mtu + dev->hard_header_len). So, adjust the - mtu so that a frame of maximum size can be transmitted by the API. - */ - if(chan->common.usedby == API) { - dev->mtu += (sizeof(api_tx_hdr_t) - FR_HEADER_LEN); - } - - dev->hard_header_len = FR_HEADER_LEN;/* media header length */ - dev->addr_len = 2; /* hardware address length */ - *(unsigned short*)dev->dev_addr = htons(chan->dlci); - - /* Set transmit buffer queue length */ - dev->tx_queue_len = 100; - - }else{ - - /* Setup the interface for Bridging */ - int hw_addr=0; - ether_setup(dev); - - /* Use a random number to generate the MAC address */ - memcpy(dev->dev_addr, "\xFE\xFC\x00\x00\x00\x00", 6); - get_random_bytes(&hw_addr, sizeof(hw_addr)); - *(int *)(dev->dev_addr + 2) += hw_addr; - } - - /* Initialize hardware parameters (just for reference) */ - dev->irq = wandev->irq; - dev->dma = wandev->dma; - dev->base_addr = wandev->ioport; - dev->mem_start = wandev->maddr; - dev->mem_end = wandev->maddr + wandev->msize - 1; - SET_MODULE_OWNER(dev); - - return 0; -} - -/*============================================================================ - * Open network interface. - * o if this is the first open, then enable communications and interrupts. - * o prevent module from unloading by incrementing use count - * - * Return 0 if O.k. or errno. - */ -static int if_open(struct net_device* dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - int err = 0; - struct timeval tv; - - if (netif_running(dev)) - return -EBUSY; - - /* Initialize the task queue */ - chan->tq_working=0; - - INIT_WORK(&chan->common.wanpipe_work, (void *)fr_bh, dev); - - /* Allocate and initialize BH circular buffer */ - chan->bh_head = kmalloc((sizeof(bh_data_t)*MAX_BH_BUFF),GFP_ATOMIC); - memset(chan->bh_head,0,(sizeof(bh_data_t)*MAX_BH_BUFF)); - atomic_set(&chan->bh_buff_used, 0); - - netif_start_queue(dev); - - wanpipe_open(card); - do_gettimeofday( &tv ); - chan->router_start_time = tv.tv_sec; - - if (test_bit(0,&chan->config_dlci)){ - trigger_config_fr (card); - }else if (chan->inarp == INARP_REQUEST){ - trigger_fr_arp(dev); - } - - return err; -} - -/*============================================================================ - * Close network interface. - * o if this is the last open, then disable communications and interrupts. - * o reset flags. - */ -static int if_close(struct net_device* dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - - if (chan->inarp == INARP_CONFIGURED) { - chan->inarp = INARP_REQUEST; - } - - netif_stop_queue(dev); - wanpipe_close(card); - - return 0; -} - -/*============================================================================ - * Re-build media header. - * - * Return: 1 physical address resolved. - * 0 physical address not resolved - */ -static int if_rebuild_hdr (struct sk_buff* skb) -{ - struct net_device *dev = skb->dev; - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - - printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n", - card->devname, dev->name); - return 1; -} - -/*============================================================================ - * Handle transmit timeout event from netif watchdog - */ -static void if_tx_timeout(struct net_device *dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t *card = chan->card; - - /* If our device stays busy for at least 5 seconds then we will - * kick start the device by making dev->tbusy = 0. We expect - * that our device never stays busy more than 5 seconds. So this - * is only used as a last resort. - */ - - chan->drvstats_if_send.if_send_tbusy++; - ++chan->ifstats.collisions; - - printk (KERN_INFO "%s: Transmit timed out on %s\n", - card->devname, dev->name); - chan->drvstats_if_send.if_send_tbusy_timeout++; - netif_wake_queue (dev); - -} - - -/*============================================================================ - * Send a packet on a network interface. - * o set tbusy flag (marks start of the transmission) to block a timer-based - * transmit from overlapping. - * o set critical flag when accessing board. - * o check link state. If link is not up, then drop the packet. - * o check channel status. If it's down then initiate a call. - * o pass a packet to corresponding WAN device. - * o free socket buffer - * - * Return: 0 complete (socket buffer must be freed) - * non-0 packet may be re-transmitted (tbusy must be set) - * - * Notes: - * 1. This routine is called either by the protocol stack or by the "net - * bottom half" (with interrupts enabled). - * - * 2. Using netif_start_queue() and netif_stop_queue() - * will inhibit further transmit requests from the protocol stack - * and can be used for flow control with protocol layer. - */ -static int if_send(struct sk_buff* skb, struct net_device* dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - int err; - unsigned char *sendpacket; - fr508_flags_t* adptr_flags = card->flags; - int udp_type; - long delay_tx_queued = 0; - unsigned long smp_flags=0; - unsigned char attr = 0; - - chan->drvstats_if_send.if_send_entry++; - - netif_stop_queue(dev); - - if (skb == NULL) { - /* if we get here, some higher layer thinks we've missed an - * tx-done interrupt. - */ - printk(KERN_INFO "%s: interface %s got kicked!\n", - card->devname, dev->name); - chan->drvstats_if_send.if_send_skb_null ++; - - netif_wake_queue(dev); - return 0; - } - - /* If a peripheral task is running just drop packets */ - if (test_bit(PERI_CRIT, &card->wandev.critical)){ - - printk(KERN_INFO "%s: Critical in if_send(): Peripheral running!\n", - card->devname); - - dev_kfree_skb_any(skb); - netif_start_queue(dev); - return 0; - } - - /* We must set the 'tbusy' flag if we already have a packet queued for - transmission in the transmit interrupt handler. However, we must - ensure that the transmit interrupt does not reset the 'tbusy' flag - just before we set it, as this will result in a "transmit timeout". - */ - set_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical); - if(chan->transmit_length) { - netif_stop_queue(dev); - chan->tick_counter = jiffies; - clear_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical); - return 1; - } - clear_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical); - - /* Move the if_header() code to here. By inserting frame - * relay header in if_header() we would break the - * tcpdump and other packet sniffers */ - chan->fr_header_len = setup_fr_header(skb,dev,chan->common.usedby); - if (chan->fr_header_len < 0 ){ - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - - dev_kfree_skb_any(skb); - netif_start_queue(dev); - return 0; - } - - sendpacket = skb->data; - - udp_type = udp_pkt_type(skb, card); - - if(udp_type != UDP_INVALID_TYPE) { - if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, skb, - chan->dlci)) { - adptr_flags->imask |= FR_INTR_TIMER; - if (udp_type == UDP_FPIPE_TYPE){ - chan->drvstats_if_send. - if_send_PIPE_request ++; - } - } - netif_start_queue(dev); - return 0; - } - - //FIXME: can we do better than sendpacket[2]? - if ((chan->common.usedby == WANPIPE) && (sendpacket[2] == 0x45)) { - - /* check to see if the source IP address is a broadcast or */ - /* multicast IP address */ - if(chk_bcast_mcast_addr(card, dev, skb)){ - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - dev_kfree_skb_any(skb); - netif_start_queue(dev); - return 0; - } - } - - - /* Lock the S514/S508 card: SMP Supported */ - s508_s514_lock(card,&smp_flags); - - if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)) { - - chan->drvstats_if_send.if_send_critical_non_ISR ++; - chan->ifstats.tx_dropped ++; - printk(KERN_INFO "%s Critical in IF_SEND: if_send() already running!\n", - card->devname); - goto if_send_start_and_exit; - } - - /* API packet check: minimum packet size must be greater than - * 16 byte API header */ - if((chan->common.usedby == API) && (skb->len <= sizeof(api_tx_hdr_t))) { - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - - - goto if_send_start_and_exit; - - }else{ - /* During API transmission, get rid of the API header */ - if (chan->common.usedby == API) { - api_tx_hdr_t* api_tx_hdr; - api_tx_hdr = (api_tx_hdr_t*)&skb->data[0x00]; - attr = api_tx_hdr->attr; - skb_pull(skb,sizeof(api_tx_hdr_t)); - } - } - - if (card->wandev.state != WAN_CONNECTED) { - chan->drvstats_if_send.if_send_wan_disconnected ++; - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - - } else if (chan->common.state != WAN_CONNECTED) { - chan->drvstats_if_send.if_send_dlci_disconnected ++; - - /* Update the DLCI state in timer interrupt */ - card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UPDATE_STATE; - adptr_flags->imask |= FR_INTR_TIMER; - - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - - } else if (!is_tx_ready(card, chan)) { - /* No tx buffers available, store for delayed transmit */ - if (!setup_for_delayed_transmit(dev, skb)){ - set_bit(1,&delay_tx_queued); - } - chan->drvstats_if_send.if_send_no_bfrs++; - - } else if (!skb->protocol) { - /* No protocols drop packet */ - chan->drvstats_if_send.if_send_protocol_error ++; - ++card->wandev.stats.tx_errors; - - } else if (test_bit(ARP_CRIT,&card->wandev.critical)){ - /* We are trying to send an ARP Packet, block IP data until - * ARP is sent */ - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - - } else { - //FIXME: IPX is not implemented in this version of Frame Relay ? - if((chan->common.usedby == WANPIPE) && - sendpacket[1] == 0x00 && - sendpacket[2] == 0x80 && - sendpacket[6] == 0x81 && - sendpacket[7] == 0x37) { - - if( chan->enable_IPX ) { - switch_net_numbers(sendpacket, - chan->network_number, 0); - } else { - //FIXME: Take this out when IPX is fixed - printk(KERN_INFO - "%s: WARNING: Unsupported IPX data in send, packet dropped\n", - card->devname); - } - - }else{ - err = fr_send_data_header(card, chan->dlci, attr, skb->len, skb->data, chan->fr_header_len); - if (err) { - switch(err) { - case FRRES_CIR_OVERFLOW: - case FRRES_BUFFER_OVERFLOW: - if (!setup_for_delayed_transmit(dev, skb)){ - set_bit(1,&delay_tx_queued); - } - chan->drvstats_if_send. - if_send_adptr_bfrs_full ++; - break; - - case FRRES_TOO_LONG: - if (net_ratelimit()){ - printk(KERN_INFO - "%s: Error: Frame too long, transmission failed %i\n", - card->devname, (unsigned int)skb->len); - } - /* Drop down to default */ - default: - chan->drvstats_if_send. - if_send_dlci_disconnected ++; - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - break; - } - } else { - chan->drvstats_if_send. - if_send_bfr_passed_to_adptr++; - ++chan->ifstats.tx_packets; - ++card->wandev.stats.tx_packets; - - chan->ifstats.tx_bytes += skb->len; - card->wandev.stats.tx_bytes += skb->len; - dev->trans_start = jiffies; - } - } - } - -if_send_start_and_exit: - - netif_start_queue(dev); - - /* If we queued the packet for transmission, we must not - * deallocate it. The packet is unlinked from the IP stack - * not copied. Therefore, we must keep the original packet */ - if (!test_bit(1,&delay_tx_queued)) { - dev_kfree_skb_any(skb); - }else{ - adptr_flags->imask |= FR_INTR_TXRDY; - card->u.f.tx_interrupts_pending ++; - } - - clear_bit(SEND_CRIT, (void*)&card->wandev.critical); - - s508_s514_unlock(card,&smp_flags); - - return 0; -} - - - -/*============================================================================ - * Setup so that a frame can be transmitted on the occurrence of a transmit - * interrupt. - */ -static int setup_for_delayed_transmit(struct net_device* dev, - struct sk_buff *skb) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - fr_dlci_interface_t* dlci_interface; - int len = skb->len; - - /* Check that the dlci is properly configured, - * before using tx interrupt */ - if (!chan->dlci_int_interface){ - if (net_ratelimit()){ - printk(KERN_INFO - "%s: ERROR on DLCI %i: Not configured properly !\n", - card->devname, chan->dlci); - printk(KERN_INFO "%s: Please contact Sangoma Technologies\n", - card->devname); - } - return 1; - } - - dlci_interface = chan->dlci_int_interface; - - if(chan->transmit_length) { - printk(KERN_INFO "%s: Big mess in setup_for_del...\n", - card->devname); - return 1; - } - - if(len > FR_MAX_NO_DATA_BYTES_IN_FRAME) { - //FIXME: increment some statistic */ - return 1; - } - - chan->transmit_length = len; - chan->delay_skb = skb; - - dlci_interface->gen_interrupt |= FR_INTR_TXRDY; - dlci_interface->packet_length = len; - - /* Turn on TX interrupt at the end of if_send */ - return 0; -} - - -/*============================================================================ - * Check to see if the packet to be transmitted contains a broadcast or - * multicast source IP address. - * Return 0 if not broadcast/multicast address, otherwise return 1. - */ - -static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev, - struct sk_buff *skb) -{ - u32 src_ip_addr; - u32 broadcast_ip_addr = 0; - struct in_device *in_dev; - fr_channel_t* chan = dev->priv; - - /* read the IP source address from the outgoing packet */ - src_ip_addr = *(u32 *)(skb->data + 14); - - /* read the IP broadcast address for the device */ - in_dev = dev->ip_ptr; - if(in_dev != NULL) { - struct in_ifaddr *ifa= in_dev->ifa_list; - if(ifa != NULL) - broadcast_ip_addr = ifa->ifa_broadcast; - else - return 0; - } - - /* check if the IP Source Address is a Broadcast address */ - if((dev->flags & IFF_BROADCAST) && (src_ip_addr == broadcast_ip_addr)) { - printk(KERN_INFO - "%s: Broadcast Source Address silently discarded\n", - card->devname); - return 1; - } - - /* check if the IP Source Address is a Multicast address */ - if((chan->mc == WANOPT_NO) && (ntohl(src_ip_addr) >= 0xE0000001) && - (ntohl(src_ip_addr) <= 0xFFFFFFFE)) { - printk(KERN_INFO - "%s: Multicast Source Address silently discarded\n", - card->devname); - return 1; - } - - return 0; -} - -/*============================================================================ - * Reply to UDP Management system. - * Return nothing. - */ -static int reply_udp( unsigned char *data, unsigned int mbox_len ) -{ - unsigned short len, udp_length, temp, ip_length; - unsigned long ip_temp; - int even_bound = 0; - - - fr_udp_pkt_t *fr_udp_pkt = (fr_udp_pkt_t *)data; - - /* Set length of packet */ - len = //sizeof(fr_encap_hdr_t)+ - sizeof(ip_pkt_t)+ - sizeof(udp_pkt_t)+ - sizeof(wp_mgmt_t)+ - sizeof(cblock_t)+ - mbox_len; - - - /* fill in UDP reply */ - fr_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY; - - /* fill in UDP length */ - udp_length = sizeof(udp_pkt_t)+ - sizeof(wp_mgmt_t)+ - sizeof(cblock_t)+ - mbox_len; - - - /* put it on an even boundary */ - if ( udp_length & 0x0001 ) { - udp_length += 1; - len += 1; - even_bound = 1; - } - - temp = (udp_length<<8)|(udp_length>>8); - fr_udp_pkt->udp_pkt.udp_length = temp; - - /* swap UDP ports */ - temp = fr_udp_pkt->udp_pkt.udp_src_port; - fr_udp_pkt->udp_pkt.udp_src_port = - fr_udp_pkt->udp_pkt.udp_dst_port; - fr_udp_pkt->udp_pkt.udp_dst_port = temp; - - - - /* add UDP pseudo header */ - temp = 0x1100; - *((unsigned short *) - (fr_udp_pkt->data+mbox_len+even_bound)) = temp; - temp = (udp_length<<8)|(udp_length>>8); - *((unsigned short *) - (fr_udp_pkt->data+mbox_len+even_bound+2)) = temp; - - /* calculate UDP checksum */ - fr_udp_pkt->udp_pkt.udp_checksum = 0; - - fr_udp_pkt->udp_pkt.udp_checksum = - calc_checksum(&data[UDP_OFFSET/*+sizeof(fr_encap_hdr_t)*/], - udp_length+UDP_OFFSET); - - /* fill in IP length */ - ip_length = udp_length + sizeof(ip_pkt_t); - temp = (ip_length<<8)|(ip_length>>8); - fr_udp_pkt->ip_pkt.total_length = temp; - - /* swap IP addresses */ - ip_temp = fr_udp_pkt->ip_pkt.ip_src_address; - fr_udp_pkt->ip_pkt.ip_src_address = - fr_udp_pkt->ip_pkt.ip_dst_address; - fr_udp_pkt->ip_pkt.ip_dst_address = ip_temp; - - - /* fill in IP checksum */ - fr_udp_pkt->ip_pkt.hdr_checksum = 0; - fr_udp_pkt->ip_pkt.hdr_checksum = - calc_checksum(&data[/*sizeof(fr_encap_hdr_t)*/0], - sizeof(ip_pkt_t)); - - return len; -} /* reply_udp */ - -unsigned short calc_checksum (char *data, int len) -{ - unsigned short temp; - unsigned long sum=0; - int i; - - for( i = 0; i <len; i+=2 ) { - memcpy(&temp,&data[i],2); - sum += (unsigned long)temp; - } - - while (sum >> 16 ) { - sum = (sum & 0xffffUL) + (sum >> 16); - } - - temp = (unsigned short)sum; - temp = ~temp; - - if( temp == 0 ) - temp = 0xffff; - - return temp; -} - -/* - If incoming is 0 (outgoing)- if the net numbers is ours make it 0 - if incoming is 1 - if the net number is 0 make it ours - -*/ -static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming) -{ - unsigned long pnetwork_number; - - pnetwork_number = (unsigned long)((sendpacket[14] << 24) + - (sendpacket[15] << 16) + (sendpacket[16] << 8) + - sendpacket[17]); - - if (!incoming) { - /* If the destination network number is ours, make it 0 */ - if( pnetwork_number == network_number) { - sendpacket[14] = sendpacket[15] = sendpacket[16] = - sendpacket[17] = 0x00; - } - } else { - /* If the incoming network is 0, make it ours */ - if( pnetwork_number == 0) { - sendpacket[14] = (unsigned char)(network_number >> 24); - sendpacket[15] = (unsigned char)((network_number & - 0x00FF0000) >> 16); - sendpacket[16] = (unsigned char)((network_number & - 0x0000FF00) >> 8); - sendpacket[17] = (unsigned char)(network_number & - 0x000000FF); - } - } - - - pnetwork_number = (unsigned long)((sendpacket[26] << 24) + - (sendpacket[27] << 16) + (sendpacket[28] << 8) + - sendpacket[29]); - - if( !incoming ) { - /* If the source network is ours, make it 0 */ - if( pnetwork_number == network_number) { - sendpacket[26] = sendpacket[27] = sendpacket[28] = - sendpacket[29] = 0x00; - } - } else { - /* If the source network is 0, make it ours */ - if( pnetwork_number == 0 ) { - sendpacket[26] = (unsigned char)(network_number >> 24); - sendpacket[27] = (unsigned char)((network_number & - 0x00FF0000) >> 16); - sendpacket[28] = (unsigned char)((network_number & - 0x0000FF00) >> 8); - sendpacket[29] = (unsigned char)(network_number & - 0x000000FF); - } - } -} /* switch_net_numbers */ - -/*============================================================================ - * Get ethernet-style interface statistics. - * Return a pointer to struct enet_statistics. - */ -static struct net_device_stats *if_stats(struct net_device *dev) -{ - fr_channel_t* chan = dev->priv; - - if(chan == NULL) - return NULL; - - return &chan->ifstats; -} - -/****** Interrupt Handlers **************************************************/ - -/*============================================================================ - * fr_isr: S508 frame relay interrupt service routine. - * - * Description: - * Frame relay main interrupt service route. This - * function check the interrupt type and takes - * the appropriate action. - */ -static void fr_isr (sdla_t* card) -{ - fr508_flags_t* flags = card->flags; - char *ptr = &flags->iflag; - int i,err; - fr_mbox_t* mbox = card->mbox; - - /* This flag prevents nesting of interrupts. See sdla_isr() routine - * in sdlamain.c. */ - card->in_isr = 1; - - ++card->statistics.isr_entry; - - - /* All peripheral (configuraiton, re-configuration) events - * take presidence over the ISR. Thus, retrigger */ - if (test_bit(PERI_CRIT, (void*)&card->wandev.critical)) { - ++card->statistics.isr_already_critical; - goto fr_isr_exit; - } - - if(card->hw.type != SDLA_S514) { - if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)) { - printk(KERN_INFO "%s: Critical while in ISR: If Send Running!\n", - card->devname); - ++card->statistics.isr_already_critical; - goto fr_isr_exit; - } - } - - switch (flags->iflag) { - - case FR_INTR_RXRDY: /* receive interrupt */ - ++card->statistics.isr_rx; - rx_intr(card); - break; - - - case FR_INTR_TXRDY: /* transmit interrupt */ - ++ card->statistics.isr_tx; - tx_intr(card); - break; - - case FR_INTR_READY: - Intr_test_counter++; - ++card->statistics.isr_intr_test; - break; - - case FR_INTR_DLC: /* Event interrupt occurred */ - mbox->cmd.command = FR_READ_STATUS; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err) - fr_event(card, err, mbox); - break; - - case FR_INTR_TIMER: /* Timer interrupt */ - timer_intr(card); - break; - - default: - ++card->statistics.isr_spurious; - spur_intr(card); - printk(KERN_INFO "%s: Interrupt Type 0x%02X!\n", - card->devname, flags->iflag); - - printk(KERN_INFO "%s: ID Bytes = ",card->devname); - for(i = 0; i < 8; i ++) - printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i)); - printk(KERN_INFO "\n"); - - break; - } - -fr_isr_exit: - - card->in_isr = 0; - flags->iflag = 0; - return; -} - - - -/*=========================================================== - * rx_intr Receive interrupt handler. - * - * Description - * Upon receiveing an interrupt: - * 1. Check that the firmware is in sync with - * the driver. - * 2. Find an appropriate network interface - * based on the received dlci number. - * 3. Check that the netowrk interface exists - * and that it's setup properly. - * 4. Copy the data into an skb buffer. - * 5. Check the packet type and take - * appropriate acton: UPD, API, ARP or Data. - */ - -static void rx_intr (sdla_t* card) -{ - fr_rx_buf_ctl_t* frbuf = card->rxmb; - fr508_flags_t* flags = card->flags; - fr_channel_t* chan; - char *ptr = &flags->iflag; - struct sk_buff* skb; - struct net_device* dev; - void* buf; - unsigned dlci, len, offs, len_incl_hdr; - int i, udp_type; - - - /* Check that firmware buffers are in sync */ - if (frbuf->flag != 0x01) { - - printk(KERN_INFO - "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n", - card->devname, (unsigned)frbuf, frbuf->flag); - - printk(KERN_INFO "%s: ID Bytes = ",card->devname); - for(i = 0; i < 8; i ++) - printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i)); - printk(KERN_INFO "\n"); - - ++card->statistics.rx_intr_corrupt_rx_bfr; - - /* Bug Fix: Mar 6 2000 - * If we get a corrupted mailbox, it means that driver - * is out of sync with the firmware. There is no recovery. - * If we don't turn off all interrupts for this card - * the machine will crash. - */ - printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname); - printk(KERN_INFO "Please contact Sangoma Technologies !\n"); - fr_set_intr_mode(card, 0, 0, 0); - return; - } - - len = frbuf->length; - dlci = frbuf->dlci; - offs = frbuf->offset; - - /* Find the network interface for this packet */ - dev = find_channel(card, dlci); - - - /* Check that the network interface is active and - * properly setup */ - if (dev == NULL) { - if( net_ratelimit()) { - printk(KERN_INFO "%s: received data on unconfigured DLCI %d!\n", - card->devname, dlci); - } - ++card->statistics.rx_intr_on_orphaned_DLCI; - ++card->wandev.stats.rx_dropped; - goto rx_done; - } - - if ((chan = dev->priv) == NULL){ - if( net_ratelimit()) { - printk(KERN_INFO "%s: received data on unconfigured DLCI %d!\n", - card->devname, dlci); - } - ++card->statistics.rx_intr_on_orphaned_DLCI; - ++card->wandev.stats.rx_dropped; - goto rx_done; - } - - skb = dev_alloc_skb(len); - - if (!netif_running(dev) || (skb == NULL)){ - - ++chan->ifstats.rx_dropped; - - if(skb == NULL) { - if (net_ratelimit()) { - printk(KERN_INFO - "%s: no socket buffers available!\n", - card->devname); - } - chan->drvstats_rx_intr.rx_intr_no_socket ++; - } - - if (!netif_running(dev)){ - chan->drvstats_rx_intr. - rx_intr_dev_not_started ++; - if (skb){ - dev_kfree_skb_any(skb); - } - } - goto rx_done; - } - - /* Copy data from the board into the socket buffer */ - if ((offs + len) > card->u.f.rx_top + 1) { - unsigned tmp = card->u.f.rx_top - offs + 1; - - buf = skb_put(skb, tmp); - sdla_peek(&card->hw, offs, buf, tmp); - offs = card->u.f.rx_base; - len -= tmp; - } - - buf = skb_put(skb, len); - sdla_peek(&card->hw, offs, buf, len); - - - /* We got the packet from the bard. - * Check the packet type and take appropriate action */ - - udp_type = udp_pkt_type( skb, card ); - - if(udp_type != UDP_INVALID_TYPE) { - - /* UDP Debug packet received, store the - * packet and handle it in timer interrupt */ - - skb_pull(skb, 1); - if (wanrouter_type_trans(skb, dev)){ - if(store_udp_mgmt_pkt(udp_type,UDP_PKT_FRM_NETWORK,card,skb,dlci)){ - - flags->imask |= FR_INTR_TIMER; - - if (udp_type == UDP_FPIPE_TYPE){ - ++chan->drvstats_rx_intr.rx_intr_PIPE_request; - } - } - } - - }else if (chan->common.usedby == API) { - - /* We are in API mode. - * Add an API header to the RAW packet - * and queue it into a circular buffer. - * Then kick the fr_bh() bottom half handler */ - - api_rx_hdr_t* api_rx_hdr; - chan->drvstats_rx_intr.rx_intr_bfr_passed_to_stack ++; - chan->ifstats.rx_packets ++; - card->wandev.stats.rx_packets ++; - - chan->ifstats.rx_bytes += skb->len; - card->wandev.stats.rx_bytes += skb->len; - - skb_push(skb, sizeof(api_rx_hdr_t)); - api_rx_hdr = (api_rx_hdr_t*)&skb->data[0x00]; - api_rx_hdr->attr = frbuf->attr; - api_rx_hdr->time_stamp = frbuf->tmstamp; - - skb->protocol = htons(ETH_P_IP); - skb->mac.raw = skb->data; - skb->dev = dev; - skb->pkt_type = WAN_PACKET_DATA; - - bh_enqueue(dev, skb); - - trigger_fr_bh(chan); - - }else if (handle_IPXWAN(skb->data,chan->name,chan->enable_IPX, chan->network_number)){ - - //FIXME: Frame Relay IPX is not supported, Yet ! - //if (chan->enable_IPX) { - // fr_send(card, dlci, 0, skb->len,skb->data); - //} - dev_kfree_skb_any(skb); - - } else if (is_arp(skb->data)) { - - /* ARP support enabled Mar 16 2000 - * Process incoming ARP reply/request, setup - * dynamic routes. */ - - if (process_ARP((arphdr_1490_t *)skb->data, card, dev)) { - if (net_ratelimit()){ - printk (KERN_INFO - "%s: Error processing ARP Packet.\n", - card->devname); - } - } - dev_kfree_skb_any(skb); - - } else if (skb->data[0] != 0x03) { - - if (net_ratelimit()) { - printk(KERN_INFO "%s: Non IETF packet discarded.\n", - card->devname); - } - dev_kfree_skb_any(skb); - - } else { - - len_incl_hdr = skb->len; - /* Decapsulate packet and pass it up the - protocol stack */ - skb->dev = dev; - - if (chan->common.usedby == BRIDGE || chan->common.usedby == BRIDGE_NODE){ - - /* Make sure it's an Ethernet frame, otherwise drop it */ - if (!memcmp(skb->data, "\x03\x00\x80\x00\x80\xC2\x00\x07", 8)) { - skb_pull(skb, 8); - skb->protocol=eth_type_trans(skb,dev); - }else{ - ++chan->drvstats_rx_intr.rx_intr_bfr_not_passed_to_stack; - ++chan->ifstats.rx_errors; - ++card->wandev.stats.rx_errors; - goto rx_done; - } - }else{ - - /* remove hardware header */ - buf = skb_pull(skb, 1); - - if (!wanrouter_type_trans(skb, dev)) { - - /* can't decapsulate packet */ - dev_kfree_skb_any(skb); - - ++chan->drvstats_rx_intr.rx_intr_bfr_not_passed_to_stack; - ++chan->ifstats.rx_errors; - ++card->wandev.stats.rx_errors; - goto rx_done; - } - skb->mac.raw = skb->data; - } - - - /* Send a packet up the IP stack */ - skb->dev->last_rx = jiffies; - netif_rx(skb); - ++chan->drvstats_rx_intr.rx_intr_bfr_passed_to_stack; - ++chan->ifstats.rx_packets; - ++card->wandev.stats.rx_packets; - - chan->ifstats.rx_bytes += len_incl_hdr; - card->wandev.stats.rx_bytes += len_incl_hdr; - } - -rx_done: - - /* Release buffer element and calculate a pointer to the next one */ - frbuf->flag = 0; - card->rxmb = ++frbuf; - if ((void*)frbuf > card->u.f.rxmb_last) - card->rxmb = card->u.f.rxmb_base; - -} - -/*================================================================== - * tx_intr: Transmit interrupt handler. - * - * Rationale: - * If the board is busy transmitting, if_send() will - * buffers a single packet and turn on - * the tx interrupt. Tx interrupt will be called - * by the board, once the firmware can send more - * data. Thus, no polling is required. - * - * Description: - * Tx interrupt is called for each - * configured dlci channel. Thus: - * 1. Obtain the netowrk interface based on the - * dlci number. - * 2. Check that network interface is up and - * properly setup. - * 3. Check for a buffered packet. - * 4. Transmit the packet. - * 5. If we are in WANPIPE mode, mark the - * NET_BH handler. - * 6. If we are in API mode, kick - * the AF_WANPIPE socket for more data. - * - */ -static void tx_intr(sdla_t *card) -{ - fr508_flags_t* flags = card->flags; - fr_tx_buf_ctl_t* bctl; - struct net_device* dev; - fr_channel_t* chan; - - if(card->hw.type == SDLA_S514){ - bctl = (void*)(flags->tse_offs + card->hw.dpmbase); - }else{ - bctl = (void*)(flags->tse_offs - FR_MB_VECTOR + - card->hw.dpmbase); - } - - /* Find the structure and make it unbusy */ - dev = find_channel(card, flags->dlci); - if (dev == NULL){ - printk(KERN_INFO "NO DEV IN TX Interrupt\n"); - goto end_of_tx_intr; - } - - if ((chan = dev->priv) == NULL){ - printk(KERN_INFO "NO CHAN IN TX Interrupt\n"); - goto end_of_tx_intr; - } - - if(!chan->transmit_length || !chan->delay_skb) { - printk(KERN_INFO "%s: tx int error - transmit length zero\n", - card->wandev.name); - goto end_of_tx_intr; - } - - /* If the 'if_send()' procedure is currently checking the 'tbusy' - status, then we cannot transmit. Instead, we configure the microcode - so as to re-issue this transmit interrupt at a later stage. - */ - if (test_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical)) { - - fr_dlci_interface_t* dlci_interface = chan->dlci_int_interface; - bctl->flag = 0xA0; - dlci_interface->gen_interrupt |= FR_INTR_TXRDY; - return; - - }else{ - bctl->dlci = flags->dlci; - bctl->length = chan->transmit_length+chan->fr_header_len; - sdla_poke(&card->hw, - fr_send_hdr(card,bctl->dlci,bctl->offset), - chan->delay_skb->data, - chan->delay_skb->len); - bctl->flag = 0xC0; - - ++chan->ifstats.tx_packets; - ++card->wandev.stats.tx_packets; - chan->ifstats.tx_bytes += chan->transmit_length; - card->wandev.stats.tx_bytes += chan->transmit_length; - - /* We must free an sk buffer, which we used - * for delayed transmission; Otherwise, the sock - * will run out of memory */ - dev_kfree_skb_any(chan->delay_skb); - - chan->delay_skb = NULL; - chan->transmit_length = 0; - - dev->trans_start = jiffies; - - if (netif_queue_stopped(dev)){ - /* If using API, than wakeup socket BH handler */ - if (chan->common.usedby == API){ - netif_start_queue(dev); - wakeup_sk_bh(dev); - }else{ - netif_wake_queue(dev); - } - } - } - -end_of_tx_intr: - - /* if any other interfaces have transmit interrupts pending, - * do not disable the global transmit interrupt */ - if(!(-- card->u.f.tx_interrupts_pending)) - flags->imask &= ~FR_INTR_TXRDY; - - -} - - -/*============================================================================ - * timer_intr: Timer interrupt handler. - * - * Rationale: - * All commans must be executed within the timer - * interrupt since no two commands should execute - * at the same time. - * - * Description: - * The timer interrupt is used to: - * 1. Processing udp calls from 'fpipemon'. - * 2. Processing update calls from /proc file system - * 3. Reading board-level statistics for - * updating the proc file system. - * 4. Sending inverse ARP request packets. - * 5. Configure a dlci/channel. - * 6. Unconfigure a dlci/channel. (Node only) - */ - -static void timer_intr(sdla_t *card) -{ - fr508_flags_t* flags = card->flags; - - /* UDP Debuging: fpipemon call */ - if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UDP) { - if(card->u.f.udp_type == UDP_FPIPE_TYPE) { - if(process_udp_mgmt_pkt(card)) { - card->u.f.timer_int_enabled &= - ~TMR_INT_ENABLED_UDP; - } - } - } - - /* /proc update call : triggered from update() */ - if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UPDATE) { - fr_get_err_stats(card); - fr_get_stats(card); - card->u.f.update_comms_stats = 0; - card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; - } - - /* Update the channel state call. This is call is - * triggered by if_send() function */ - if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UPDATE_STATE){ - struct net_device *dev; - if (card->wandev.state == WAN_CONNECTED){ - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)){ - fr_channel_t *chan = dev->priv; - if (chan->common.state != WAN_CONNECTED){ - update_chan_state(dev); - } - } - } - card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE_STATE; - } - - /* configure a dlci/channel */ - if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_CONFIG){ - config_fr(card); - card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_CONFIG; - } - - /* unconfigure a dlci/channel */ - if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG){ - unconfig_fr(card); - card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG; - } - - - /* Transmit ARP packets */ - if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_ARP){ - int i=0; - struct net_device *dev; - - if (card->u.f.arp_dev == NULL) - card->u.f.arp_dev = card->wandev.dev; - - dev = card->u.f.arp_dev; - - for (;;){ - - fr_channel_t *chan = dev->priv; - - /* If the interface is brought down cancel sending In-ARPs */ - if (!(dev->flags&IFF_UP)){ - clear_bit(0,&chan->inarp_ready); - } - - if (test_bit(0,&chan->inarp_ready)){ - - if (check_tx_status(card,dev)){ - set_bit(ARP_CRIT,&card->wandev.critical); - break; - } - - if (!send_inarp_request(card,dev)){ - trigger_fr_arp(dev); - chan->inarp_tick = jiffies; - } - - clear_bit(0,&chan->inarp_ready); - dev = move_dev_to_next(card,dev); - break; - } - dev = move_dev_to_next(card,dev); - - if (++i == card->wandev.new_if_cnt){ - card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_ARP; - break; - } - } - card->u.f.arp_dev = dev; - } - - if(!card->u.f.timer_int_enabled) - flags->imask &= ~FR_INTR_TIMER; -} - - -/*============================================================================ - * spur_intr: Spurious interrupt handler. - * - * Description: - * We don't know this interrupt. - * Print a warning. - */ - -static void spur_intr (sdla_t* card) -{ - if (net_ratelimit()){ - printk(KERN_INFO "%s: spurious interrupt!\n", card->devname); - } -} - - -//FIXME: Fix the IPX in next version -/*=========================================================================== - * Return 0 for non-IPXWAN packet - * 1 for IPXWAN packet or IPX is not enabled! - * FIXME: Use a IPX structure here not offsets - */ -static int handle_IPXWAN(unsigned char *sendpacket, - char *devname, unsigned char enable_IPX, - unsigned long network_number) -{ - int i; - - if( sendpacket[1] == 0x00 && sendpacket[2] == 0x80 && - sendpacket[6] == 0x81 && sendpacket[7] == 0x37) { - - /* It's an IPX packet */ - if (!enable_IPX){ - /* Return 1 so we don't pass it up the stack. */ - //FIXME: Take this out when IPX is fixed - if (net_ratelimit()){ - printk (KERN_INFO - "%s: WARNING: Unsupported IPX packet received and dropped\n", - devname); - } - return 1; - } - } else { - /* It's not IPX so return and pass it up the stack. */ - return 0; - } - - if( sendpacket[24] == 0x90 && sendpacket[25] == 0x04){ - /* It's IPXWAN */ - - if( sendpacket[10] == 0x02 && sendpacket[42] == 0x00){ - - /* It's a timer request packet */ - printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n", - devname); - - /* Go through the routing options and answer no to every - * option except Unnumbered RIP/SAP - */ - for(i = 49; sendpacket[i] == 0x00; i += 5){ - /* 0x02 is the option for Unnumbered RIP/SAP */ - if( sendpacket[i + 4] != 0x02){ - sendpacket[i + 1] = 0; - } - } - - /* Skip over the extended Node ID option */ - if( sendpacket[i] == 0x04 ){ - i += 8; - } - - /* We also want to turn off all header compression opt. - */ - for(; sendpacket[i] == 0x80 ;){ - sendpacket[i + 1] = 0; - i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4; - } - - /* Set the packet type to timer response */ - sendpacket[42] = 0x01; - - printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n", - devname); - - } else if( sendpacket[42] == 0x02 ){ - - /* This is an information request packet */ - printk(KERN_INFO - "%s: Received IPXWAN Information Request packet\n", - devname); - - /* Set the packet type to information response */ - sendpacket[42] = 0x03; - - /* Set the router name */ - sendpacket[59] = 'F'; - sendpacket[60] = 'P'; - sendpacket[61] = 'I'; - sendpacket[62] = 'P'; - sendpacket[63] = 'E'; - sendpacket[64] = '-'; - sendpacket[65] = CVHexToAscii(network_number >> 28); - sendpacket[66] = CVHexToAscii((network_number & 0x0F000000)>> 24); - sendpacket[67] = CVHexToAscii((network_number & 0x00F00000)>> 20); - sendpacket[68] = CVHexToAscii((network_number & 0x000F0000)>> 16); - sendpacket[69] = CVHexToAscii((network_number & 0x0000F000)>> 12); - sendpacket[70] = CVHexToAscii((network_number & 0x00000F00)>> 8); - sendpacket[71] = CVHexToAscii((network_number & 0x000000F0)>> 4); - sendpacket[72] = CVHexToAscii(network_number & 0x0000000F); - for(i = 73; i < 107; i+= 1) - { - sendpacket[i] = 0; - } - - printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n", - devname); - } else { - - printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname); - return 0; - } - - /* Set the WNodeID to our network address */ - sendpacket[43] = (unsigned char)(network_number >> 24); - sendpacket[44] = (unsigned char)((network_number & 0x00FF0000) >> 16); - sendpacket[45] = (unsigned char)((network_number & 0x0000FF00) >> 8); - sendpacket[46] = (unsigned char)(network_number & 0x000000FF); - - return 1; - } - - /* If we get here, it's an IPX-data packet so it'll get passed up the - * stack. - * switch the network numbers - */ - switch_net_numbers(sendpacket, network_number ,1); - return 0; -} -/*============================================================================ - * process_route - * - * Rationale: - * If the interface goes down, or we receive an ARP request, - * we have to change the network interface ip addresses. - * This cannot be done within the interrupt. - * - * Description: - * - * This routine is called as a polling routine to dynamically - * add/delete routes negotiated by inverse ARP. It is in this - * "task" because we don't want routes to be added while in - * interrupt context. - * - * Usage: - * This function is called by fr_poll() polling funtion. - */ - -static void process_route(struct net_device *dev) -{ - fr_channel_t *chan = dev->priv; - sdla_t *card = chan->card; - - struct ifreq if_info; - struct sockaddr_in *if_data; - mm_segment_t fs = get_fs(); - u32 ip_tmp; - int err; - - - switch(chan->route_flag){ - - case ADD_ROUTE: - - /* Set remote addresses */ - memset(&if_info, 0, sizeof(if_info)); - strcpy(if_info.ifr_name, dev->name); - - set_fs(get_ds()); /* get user space block */ - - if_data = (struct sockaddr_in *)&if_info.ifr_dstaddr; - if_data->sin_addr.s_addr = chan->ip_remote; - if_data->sin_family = AF_INET; - err = devinet_ioctl( SIOCSIFDSTADDR, &if_info ); - - set_fs(fs); /* restore old block */ - - if (err) { - printk(KERN_INFO - "%s: Route Add failed. Error: %d\n", - card->devname,err); - printk(KERN_INFO "%s: Address: %u.%u.%u.%u\n", - chan->name, NIPQUAD(chan->ip_remote)); - - }else { - printk(KERN_INFO "%s: Route Added Successfully: %u.%u.%u.%u\n", - card->devname,NIPQUAD(chan->ip_remote)); - chan->route_flag = ROUTE_ADDED; - } - break; - - case REMOVE_ROUTE: - - /* Set remote addresses */ - memset(&if_info, 0, sizeof(if_info)); - strcpy(if_info.ifr_name, dev->name); - - ip_tmp = get_ip_address(dev,WAN_POINTOPOINT_IP); - - set_fs(get_ds()); /* get user space block */ - - if_data = (struct sockaddr_in *)&if_info.ifr_dstaddr; - if_data->sin_addr.s_addr = 0; - if_data->sin_family = AF_INET; - err = devinet_ioctl( SIOCSIFDSTADDR, &if_info ); - - set_fs(fs); - - if (err) { - printk(KERN_INFO - "%s: Deleting of route failed. Error: %d\n", - card->devname,err); - printk(KERN_INFO "%s: Address: %u.%u.%u.%u\n", - dev->name,NIPQUAD(chan->ip_remote) ); - - } else { - printk(KERN_INFO "%s: Route Removed Sucessfuly: %u.%u.%u.%u\n", - card->devname,NIPQUAD(ip_tmp)); - chan->route_flag = NO_ROUTE; - } - break; - - } /* Case Statement */ - -} - - - -/****** Frame Relay Firmware-Specific Functions *****************************/ - -/*============================================================================ - * Read firmware code version. - * o fill string str with firmware version info. - */ -static int fr_read_version (sdla_t* card, char* str) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - mbox->cmd.command = FR_READ_CODE_VERSION; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if (!err && str) { - int len = mbox->cmd.length; - memcpy(str, mbox->data, len); - str[len] = '\0'; - } - return err; -} - -/*============================================================================ - * Set global configuration. - */ -static int fr_configure (sdla_t* card, fr_conf_t *conf) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int dlci_num = card->u.f.dlci_num; - int err, i; - - do - { - memcpy(mbox->data, conf, sizeof(fr_conf_t)); - - if (dlci_num) for (i = 0; i < dlci_num; ++i) - ((fr_conf_t*)mbox->data)->dlci[i] = - card->u.f.node_dlci[i]; - - mbox->cmd.command = FR_SET_CONFIG; - mbox->cmd.length = - sizeof(fr_conf_t) + dlci_num * sizeof(short); - - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - } while (err && retry-- && fr_event(card, err, mbox)); - - /*NC Oct 12 2000 */ - if (err != CMD_OK){ - printk(KERN_ERR "%s: Frame Relay Configuration Failed: rc=0x%x\n", - card->devname,err); - } - - return err; -} - -/*============================================================================ - * Set DLCI configuration. - */ -static int fr_dlci_configure (sdla_t* card, fr_dlc_conf_t *conf, unsigned dlci) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memcpy(mbox->data, conf, sizeof(fr_dlc_conf_t)); - mbox->cmd.dlci = (unsigned short) dlci; - mbox->cmd.command = FR_SET_CONFIG; - mbox->cmd.length = sizeof(fr_dlc_conf_t); - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry--); - - return err; -} -/*============================================================================ - * Set interrupt mode. - */ -static int fr_set_intr_mode (sdla_t* card, unsigned mode, unsigned mtu, - unsigned short timeout) -{ - fr_mbox_t* mbox = card->mbox; - fr508_intr_ctl_t* ictl = (void*)mbox->data; - int retry = MAX_CMD_RETRY; - int err; - - do - { - memset(ictl, 0, sizeof(fr508_intr_ctl_t)); - ictl->mode = mode; - ictl->tx_len = mtu; - ictl->irq = card->hw.irq; - - /* indicate timeout on timer */ - if (mode & 0x20) ictl->timeout = timeout; - - mbox->cmd.length = sizeof(fr508_intr_ctl_t); - mbox->cmd.command = FR_SET_INTR_MODE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - } while (err && retry-- && fr_event(card, err, mbox)); - - return err; -} - -/*============================================================================ - * Enable communications. - */ -static int fr_comm_enable (sdla_t* card) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - mbox->cmd.command = FR_COMM_ENABLE; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - return err; -} - -/*============================================================================ - * fr_comm_disable - * - * Warning: This functin is called by the shutdown() procedure. It is void - * since dev->priv are has already been deallocated and no - * error checking is possible using fr_event() function. - */ -static void fr_comm_disable (sdla_t* card) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do { - mbox->cmd.command = FR_SET_MODEM_STATUS; - mbox->cmd.length = 1; - mbox->data[0] = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry--); - - retry = MAX_CMD_RETRY; - - do - { - mbox->cmd.command = FR_COMM_DISABLE; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry--); - - return; -} - - - -/*============================================================================ - * Get communications error statistics. - */ -static int fr_get_err_stats (sdla_t* card) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - - do - { - mbox->cmd.command = FR_READ_ERROR_STATS; - mbox->cmd.length = 0; - mbox->cmd.dlci = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if (!err) { - fr_comm_stat_t* stats = (void*)mbox->data; - card->wandev.stats.rx_over_errors = stats->rx_overruns; - card->wandev.stats.rx_crc_errors = stats->rx_bad_crc; - card->wandev.stats.rx_missed_errors = stats->rx_aborts; - card->wandev.stats.rx_length_errors = stats->rx_too_long; - card->wandev.stats.tx_aborted_errors = stats->tx_aborts; - - } - - return err; -} - -/*============================================================================ - * Get statistics. - */ -static int fr_get_stats (sdla_t* card) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - - do - { - mbox->cmd.command = FR_READ_STATISTICS; - mbox->cmd.length = 0; - mbox->cmd.dlci = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if (!err) { - fr_link_stat_t* stats = (void*)mbox->data; - card->wandev.stats.rx_frame_errors = stats->rx_bad_format; - card->wandev.stats.rx_dropped = - stats->rx_dropped + stats->rx_dropped2; - } - - return err; -} - -/*============================================================================ - * Add DLCI(s) (Access Node only!). - * This routine will perform the ADD_DLCIs command for the specified DLCI. - */ -static int fr_add_dlci (sdla_t* card, int dlci) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - unsigned short* dlci_list = (void*)mbox->data; - - mbox->cmd.length = sizeof(short); - dlci_list[0] = dlci; - mbox->cmd.command = FR_ADD_DLCI; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - } while (err && retry-- && fr_event(card, err, mbox)); - - return err; -} - -/*============================================================================ - * Activate DLCI(s) (Access Node only!). - * This routine will perform the ACTIVATE_DLCIs command with a DLCI number. - */ -static int fr_activate_dlci (sdla_t* card, int dlci) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - unsigned short* dlci_list = (void*)mbox->data; - - mbox->cmd.length = sizeof(short); - dlci_list[0] = dlci; - mbox->cmd.command = FR_ACTIVATE_DLCI; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - } while (err && retry-- && fr_event(card, err, mbox)); - - return err; -} - -/*============================================================================ - * Delete DLCI(s) (Access Node only!). - * This routine will perform the DELETE_DLCIs command with a DLCI number. - */ -static int fr_delete_dlci (sdla_t* card, int dlci) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - unsigned short* dlci_list = (void*)mbox->data; - - mbox->cmd.length = sizeof(short); - dlci_list[0] = dlci; - mbox->cmd.command = FR_DELETE_DLCI; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - } while (err && retry-- && fr_event(card, err, mbox)); - - return err; -} - - - -/*============================================================================ - * Issue in-channel signalling frame. - */ -static int fr_issue_isf (sdla_t* card, int isf) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - mbox->data[0] = isf; - mbox->cmd.length = 1; - mbox->cmd.command = FR_ISSUE_IS_FRAME; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - return err; -} - - -static unsigned int fr_send_hdr (sdla_t*card, int dlci, unsigned int offset) -{ - struct net_device *dev = find_channel(card,dlci); - fr_channel_t *chan; - - if (!dev || !(chan=dev->priv)) - return offset; - - if (chan->fr_header_len){ - sdla_poke(&card->hw, offset, chan->fr_header, chan->fr_header_len); - } - - return offset+chan->fr_header_len; -} - -/*============================================================================ - * Send a frame on a selected DLCI. - */ -static int fr_send_data_header (sdla_t* card, int dlci, unsigned char attr, int len, - void *buf, unsigned char hdr_len) -{ - fr_mbox_t* mbox = card->mbox + 0x800; - int retry = MAX_CMD_RETRY; - int err; - - do - { - mbox->cmd.dlci = dlci; - mbox->cmd.attr = attr; - mbox->cmd.length = len+hdr_len; - mbox->cmd.command = FR_WRITE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if (!err) { - fr_tx_buf_ctl_t* frbuf; - - if(card->hw.type == SDLA_S514) - frbuf = (void*)(*(unsigned long*)mbox->data + - card->hw.dpmbase); - else - frbuf = (void*)(*(unsigned long*)mbox->data - - FR_MB_VECTOR + card->hw.dpmbase); - - sdla_poke(&card->hw, fr_send_hdr(card,dlci,frbuf->offset), buf, len); - frbuf->flag = 0x01; - } - - return err; -} - -static int fr_send (sdla_t* card, int dlci, unsigned char attr, int len, - void *buf) -{ - fr_mbox_t* mbox = card->mbox + 0x800; - int retry = MAX_CMD_RETRY; - int err; - - do - { - mbox->cmd.dlci = dlci; - mbox->cmd.attr = attr; - mbox->cmd.length = len; - mbox->cmd.command = FR_WRITE; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if (!err) { - fr_tx_buf_ctl_t* frbuf; - - if(card->hw.type == SDLA_S514) - frbuf = (void*)(*(unsigned long*)mbox->data + - card->hw.dpmbase); - else - frbuf = (void*)(*(unsigned long*)mbox->data - - FR_MB_VECTOR + card->hw.dpmbase); - - sdla_poke(&card->hw, frbuf->offset, buf, len); - frbuf->flag = 0x01; - } - - return err; -} - - -/****** Firmware Asynchronous Event Handlers ********************************/ - -/*============================================================================ - * Main asyncronous event/error handler. - * This routine is called whenever firmware command returns non-zero - * return code. - * - * Return zero if previous command has to be cancelled. - */ -static int fr_event (sdla_t *card, int event, fr_mbox_t* mbox) -{ - fr508_flags_t* flags = card->flags; - char *ptr = &flags->iflag; - int i; - - switch (event) { - - case FRRES_MODEM_FAILURE: - return fr_modem_failure(card, mbox); - - case FRRES_CHANNEL_DOWN: { - struct net_device *dev; - - /* Remove all routes from associated DLCI's */ - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)) { - fr_channel_t *chan = dev->priv; - if (chan->route_flag == ROUTE_ADDED) { - chan->route_flag = REMOVE_ROUTE; - } - - if (chan->inarp == INARP_CONFIGURED) { - chan->inarp = INARP_REQUEST; - } - - /* If the link becomes disconnected then, - * all channels will be disconnected - * as well. - */ - set_chan_state(dev,WAN_DISCONNECTED); - } - - wanpipe_set_state(card, WAN_DISCONNECTED); - return 1; - } - - case FRRES_CHANNEL_UP: { - struct net_device *dev; - - /* FIXME: Only startup devices that are on the list */ - - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)) { - - set_chan_state(dev,WAN_CONNECTED); - } - - wanpipe_set_state(card, WAN_CONNECTED); - return 1; - } - - case FRRES_DLCI_CHANGE: - return fr_dlci_change(card, mbox); - - case FRRES_DLCI_MISMATCH: - printk(KERN_INFO "%s: DLCI list mismatch!\n", - card->devname); - return 1; - - case CMD_TIMEOUT: - printk(KERN_ERR "%s: command 0x%02X timed out!\n", - card->devname, mbox->cmd.command); - printk(KERN_INFO "%s: ID Bytes = ",card->devname); - for(i = 0; i < 8; i ++) - printk(KERN_INFO "0x%02X ", *(ptr + 0x18 + i)); - printk(KERN_INFO "\n"); - - break; - - case FRRES_DLCI_INACTIVE: - break; - - case FRRES_CIR_OVERFLOW: - break; - - case FRRES_BUFFER_OVERFLOW: - break; - - default: - printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n" - , card->devname, mbox->cmd.command, event); - } - - return 0; -} - -/*============================================================================ - * Handle modem error. - * - * Return zero if previous command has to be cancelled. - */ -static int fr_modem_failure (sdla_t *card, fr_mbox_t* mbox) -{ - printk(KERN_INFO "%s: physical link down! (modem error 0x%02X)\n", - card->devname, mbox->data[0]); - - switch (mbox->cmd.command){ - case FR_WRITE: - - case FR_READ: - return 0; - } - - return 1; -} - -/*============================================================================ - * Handle DLCI status change. - * - * Return zero if previous command has to be cancelled. - */ -static int fr_dlci_change (sdla_t *card, fr_mbox_t* mbox) -{ - dlci_status_t* status = (void*)mbox->data; - int cnt = mbox->cmd.length / sizeof(dlci_status_t); - fr_channel_t *chan; - struct net_device* dev2; - - - for (; cnt; --cnt, ++status) { - - unsigned short dlci= status->dlci; - struct net_device* dev = find_channel(card, dlci); - - if (dev == NULL){ - printk(KERN_INFO - "%s: CPE contains unconfigured DLCI= %d\n", - card->devname, dlci); - - printk(KERN_INFO - "%s: unconfigured DLCI %d reported by network\n" - , card->devname, dlci); - - }else{ - if (status->state == FR_LINK_INOPER) { - printk(KERN_INFO - "%s: DLCI %u is inactive!\n", - card->devname, dlci); - - if (dev && netif_running(dev)) - set_chan_state(dev, WAN_DISCONNECTED); - } - - if (status->state & FR_DLCI_DELETED) { - - printk(KERN_INFO - "%s: DLCI %u has been deleted!\n", - card->devname, dlci); - - if (dev && netif_running(dev)){ - - fr_channel_t *chan = dev->priv; - - if (chan->route_flag == ROUTE_ADDED) { - chan->route_flag = REMOVE_ROUTE; - /* The state change will trigger - * the fr polling routine */ - } - - if (chan->inarp == INARP_CONFIGURED) { - chan->inarp = INARP_REQUEST; - } - - set_chan_state(dev, WAN_DISCONNECTED); - } - - } else if (status->state & FR_DLCI_ACTIVE) { - - chan = dev->priv; - - /* This flag is used for configuring specific - DLCI(s) when they become active. - */ - chan->dlci_configured = DLCI_CONFIG_PENDING; - - set_chan_state(dev, WAN_CONNECTED); - - } - } - } - - for (dev2 = card->wandev.dev; dev2; - dev2 = *((struct net_device **)dev2->priv)){ - - chan = dev2->priv; - - if (chan->dlci_configured == DLCI_CONFIG_PENDING) { - if (fr_init_dlci(card, chan)){ - return 1; - } - } - - } - return 1; -} - - -static int fr_init_dlci (sdla_t *card, fr_channel_t *chan) -{ - fr_dlc_conf_t cfg; - - memset(&cfg, 0, sizeof(cfg)); - - if ( chan->cir_status == CIR_DISABLED) { - - cfg.cir_fwd = cfg.cir_bwd = 16; - cfg.bc_fwd = cfg.bc_bwd = 16; - cfg.conf_flags = 0x0001; - - }else if (chan->cir_status == CIR_ENABLED) { - - cfg.cir_fwd = cfg.cir_bwd = chan->cir; - cfg.bc_fwd = cfg.bc_bwd = chan->bc; - cfg.be_fwd = cfg.be_bwd = chan->be; - cfg.conf_flags = 0x0000; - } - - if (fr_dlci_configure( card, &cfg , chan->dlci)){ - printk(KERN_INFO - "%s: DLCI Configure failed for %d\n", - card->devname, chan->dlci); - return 1; - } - - chan->dlci_configured = DLCI_CONFIGURED; - - /* Read the interface byte mapping into the channel - * structure. - */ - read_DLCI_IB_mapping( card, chan ); - - return 0; -} -/******* Miscellaneous ******************************************************/ - -/*============================================================================ - * Update channel state. - */ -static int update_chan_state(struct net_device* dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - int err; - - do - { - mbox->cmd.command = FR_LIST_ACTIVE_DLCI; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if (!err) { - - unsigned short* list = (void*)mbox->data; - int cnt = mbox->cmd.length / sizeof(short); - - err=1; - - for (; cnt; --cnt, ++list) { - - if (*list == chan->dlci) { - set_chan_state(dev, WAN_CONNECTED); - - - /* May 23 2000. NC - * When a dlci is added or restarted, - * the dlci_int_interface pointer must - * be reinitialized. */ - if (!chan->dlci_int_interface){ - err=fr_init_dlci (card,chan); - } - break; - } - } - } - - return err; -} - -/*============================================================================ - * Set channel state. - */ -static void set_chan_state(struct net_device* dev, int state) -{ - fr_channel_t* chan = dev->priv; - sdla_t* card = chan->card; - - if (chan->common.state != state) { - - switch (state) { - - case WAN_CONNECTED: - printk(KERN_INFO - "%s: Interface %s: DLCI %d connected\n", - card->devname, dev->name, chan->dlci); - - /* If the interface was previoulsy down, - * bring it up, since the channel is active */ - - trigger_fr_poll (dev); - trigger_fr_arp (dev); - break; - - case WAN_CONNECTING: - printk(KERN_INFO - "%s: Interface %s: DLCI %d connecting\n", - card->devname, dev->name, chan->dlci); - break; - - case WAN_DISCONNECTED: - printk (KERN_INFO - "%s: Interface %s: DLCI %d disconnected!\n", - card->devname, dev->name, chan->dlci); - - /* If the interface is up, bring it down, - * since the channel is now disconnected */ - trigger_fr_poll (dev); - break; - } - - chan->common.state = state; - } - - chan->state_tick = jiffies; -} - -/*============================================================================ - * Find network device by its channel number. - * - * We need this critical flag because we change - * the dlci_to_dev_map outside the interrupt. - * - * NOTE: del_if() functions updates this array, it uses - * the spin locks to avoid corruption. - */ -static struct net_device* find_channel(sdla_t* card, unsigned dlci) -{ - if(dlci > HIGHEST_VALID_DLCI) - return NULL; - - return(card->u.f.dlci_to_dev_map[dlci]); -} - -/*============================================================================ - * Check to see if a frame can be sent. If no transmit buffers available, - * enable transmit interrupts. - * - * Return: 1 - Tx buffer(s) available - * 0 - no buffers available - */ -static int is_tx_ready (sdla_t* card, fr_channel_t* chan) -{ - unsigned char sb; - - if(card->hw.type == SDLA_S514) - return 1; - - sb = inb(card->hw.port); - if (sb & 0x02) - return 1; - - return 0; -} - -/*============================================================================ - * Convert decimal string to unsigned integer. - * If len != 0 then only 'len' characters of the string are converted. - */ -static unsigned int dec_to_uint (unsigned char* str, int len) -{ - unsigned val; - - if (!len) - len = strlen(str); - - for (val = 0; len && isdigit(*str); ++str, --len) - val = (val * 10) + (*str - (unsigned)'0'); - - return val; -} - - - -/*============================================================================= - * Store a UDP management packet for later processing. - */ - -static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, - struct sk_buff *skb, int dlci) -{ - int udp_pkt_stored = 0; - - struct net_device *dev = find_channel(card, dlci); - fr_channel_t *chan; - - if (!dev || !(chan=dev->priv)) - return 1; - - if(!card->u.f.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){ - card->u.f.udp_pkt_lgth = skb->len + chan->fr_header_len; - card->u.f.udp_type = udp_type; - card->u.f.udp_pkt_src = udp_pkt_src; - card->u.f.udp_dlci = dlci; - memcpy(card->u.f.udp_pkt_data, skb->data, skb->len); - card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UDP; - udp_pkt_stored = 1; - - }else{ - printk(KERN_INFO "ERROR: UDP packet not stored for DLCI %d\n", - dlci); - } - - if(udp_pkt_src == UDP_PKT_FRM_STACK){ - dev_kfree_skb_any(skb); - }else{ - dev_kfree_skb_any(skb); - } - - return(udp_pkt_stored); -} - - -/*============================================================================== - * Process UDP call of type FPIPE8ND - */ -static int process_udp_mgmt_pkt(sdla_t* card) -{ - - int c_retry = MAX_CMD_RETRY; - unsigned char *buf; - unsigned char frames; - unsigned int len; - unsigned short buffer_length; - struct sk_buff *new_skb; - fr_mbox_t* mbox = card->mbox; - int err; - struct timeval tv; - int udp_mgmt_req_valid = 1; - struct net_device* dev; - fr_channel_t* chan; - fr_udp_pkt_t *fr_udp_pkt; - unsigned short num_trc_els; - fr_trc_el_t* ptr_trc_el; - fr_trc_el_t trc_el; - fpipemon_trc_t* fpipemon_trc; - - char udp_pkt_src = card->u.f.udp_pkt_src; - int dlci = card->u.f.udp_dlci; - - /* Find network interface for this packet */ - dev = find_channel(card, dlci); - if (!dev){ - card->u.f.udp_pkt_lgth = 0; - return 1; - } - if ((chan = dev->priv) == NULL){ - card->u.f.udp_pkt_lgth = 0; - return 1; - } - - /* If the UDP packet is from the network, we are going to have to - transmit a response. Before doing so, we must check to see that - we are not currently transmitting a frame (in 'if_send()') and - that we are not already in a 'delayed transmit' state. - */ - if(udp_pkt_src == UDP_PKT_FRM_NETWORK) { - if (check_tx_status(card,dev)){ - card->u.f.udp_pkt_lgth = 0; - return 1; - } - } - - fr_udp_pkt = (fr_udp_pkt_t *)card->u.f.udp_pkt_data; - - if(udp_pkt_src == UDP_PKT_FRM_NETWORK) { - - switch(fr_udp_pkt->cblock.command) { - - case FR_READ_MODEM_STATUS: - case FR_READ_STATUS: - case FPIPE_ROUTER_UP_TIME: - case FR_READ_ERROR_STATS: - case FPIPE_DRIVER_STAT_GEN: - case FR_READ_STATISTICS: - case FR_READ_ADD_DLC_STATS: - case FR_READ_CONFIG: - case FR_READ_CODE_VERSION: - udp_mgmt_req_valid = 1; - break; - default: - udp_mgmt_req_valid = 0; - break; - } - } - - if(!udp_mgmt_req_valid) { - /* set length to 0 */ - fr_udp_pkt->cblock.length = 0; - /* set return code */ - fr_udp_pkt->cblock.result = 0xCD; - - chan->drvstats_gen.UDP_PIPE_mgmt_direction_err ++; - - if (net_ratelimit()){ - printk(KERN_INFO - "%s: Warning, Illegal UDP command attempted from network: %x\n", - card->devname,fr_udp_pkt->cblock.command); - } - - } else { - - switch(fr_udp_pkt->cblock.command) { - - case FPIPE_ENABLE_TRACING: - if(!card->TracingEnabled) { - do { - mbox->cmd.command = FR_SET_TRACE_CONFIG; - mbox->cmd.length = 1; - mbox->cmd.dlci = 0x00; - mbox->data[0] = fr_udp_pkt->data[0] | - RESET_TRC; - err = sdla_exec(mbox) ? - mbox->cmd.result : CMD_TIMEOUT; - } while (err && c_retry-- && fr_event(card, err, - mbox)); - - if(err) { - card->TracingEnabled = 0; - /* set the return code */ - fr_udp_pkt->cblock.result = - mbox->cmd.result; - mbox->cmd.length = 0; - break; - } - - sdla_peek(&card->hw, NO_TRC_ELEMENTS_OFF, - &num_trc_els, 2); - sdla_peek(&card->hw, BASE_TRC_ELEMENTS_OFF, - &card->u.f.trc_el_base, 4); - card->u.f.curr_trc_el = card->u.f.trc_el_base; - card->u.f.trc_el_last = card->u.f.curr_trc_el + - ((num_trc_els - 1) * - sizeof(fr_trc_el_t)); - - /* Calculate the maximum trace data area in */ - /* the UDP packet */ - card->u.f.trc_bfr_space=(MAX_LGTH_UDP_MGNT_PKT - - //sizeof(fr_encap_hdr_t) - - sizeof(ip_pkt_t) - - sizeof(udp_pkt_t) - - sizeof(wp_mgmt_t) - - sizeof(cblock_t)); - - /* set return code */ - fr_udp_pkt->cblock.result = 0; - - } else { - /* set return code to line trace already - enabled */ - fr_udp_pkt->cblock.result = 1; - } - - mbox->cmd.length = 0; - card->TracingEnabled = 1; - break; - - - case FPIPE_DISABLE_TRACING: - if(card->TracingEnabled) { - - do { - mbox->cmd.command = FR_SET_TRACE_CONFIG; - mbox->cmd.length = 1; - mbox->cmd.dlci = 0x00; - mbox->data[0] = ~ACTIVATE_TRC; - err = sdla_exec(mbox) ? - mbox->cmd.result : CMD_TIMEOUT; - } while (err && c_retry-- && fr_event(card, err, mbox)); - } - - /* set return code */ - fr_udp_pkt->cblock.result = 0; - mbox->cmd.length = 0; - card->TracingEnabled = 0; - break; - - case FPIPE_GET_TRACE_INFO: - - /* Line trace cannot be performed on the 502 */ - if(!card->TracingEnabled) { - /* set return code */ - fr_udp_pkt->cblock.result = 1; - mbox->cmd.length = 0; - break; - } - - ptr_trc_el = (void *)card->u.f.curr_trc_el; - - buffer_length = 0; - fr_udp_pkt->data[0x00] = 0x00; - - for(frames = 0; frames < MAX_FRMS_TRACED; frames ++) { - - sdla_peek(&card->hw, (unsigned long)ptr_trc_el, - (void *)&trc_el.flag, - sizeof(fr_trc_el_t)); - if(trc_el.flag == 0x00) { - break; - } - if((card->u.f.trc_bfr_space - buffer_length) - < sizeof(fpipemon_trc_hdr_t)) { - fr_udp_pkt->data[0x00] |= MORE_TRC_DATA; - break; - } - - fpipemon_trc = - (fpipemon_trc_t *)&fr_udp_pkt->data[buffer_length]; - fpipemon_trc->fpipemon_trc_hdr.status = - trc_el.attr; - fpipemon_trc->fpipemon_trc_hdr.tmstamp = - trc_el.tmstamp; - fpipemon_trc->fpipemon_trc_hdr.length = - trc_el.length; - - if(!trc_el.offset || !trc_el.length) { - - fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x00; - - }else if((trc_el.length + sizeof(fpipemon_trc_hdr_t) + 1) > - (card->u.f.trc_bfr_space - buffer_length)){ - - fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x00; - fr_udp_pkt->data[0x00] |= MORE_TRC_DATA; - - }else { - fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x01; - sdla_peek(&card->hw, trc_el.offset, - fpipemon_trc->data, - trc_el.length); - } - - trc_el.flag = 0x00; - sdla_poke(&card->hw, (unsigned long)ptr_trc_el, - &trc_el.flag, 1); - - ptr_trc_el ++; - if((void *)ptr_trc_el > card->u.f.trc_el_last) - ptr_trc_el = (void*)card->u.f.trc_el_base; - - buffer_length += sizeof(fpipemon_trc_hdr_t); - if(fpipemon_trc->fpipemon_trc_hdr.data_passed) { - buffer_length += trc_el.length; - } - - if(fr_udp_pkt->data[0x00] & MORE_TRC_DATA) { - break; - } - } - - if(frames == MAX_FRMS_TRACED) { - fr_udp_pkt->data[0x00] |= MORE_TRC_DATA; - } - - card->u.f.curr_trc_el = (void *)ptr_trc_el; - - /* set the total number of frames passed */ - fr_udp_pkt->data[0x00] |= - ((frames << 1) & (MAX_FRMS_TRACED << 1)); - - /* set the data length and return code */ - fr_udp_pkt->cblock.length = mbox->cmd.length = buffer_length; - fr_udp_pkt->cblock.result = 0; - break; - - case FPIPE_FT1_READ_STATUS: - sdla_peek(&card->hw, 0xF020, - &fr_udp_pkt->data[0x00] , 2); - fr_udp_pkt->cblock.length = mbox->cmd.length = 2; - fr_udp_pkt->cblock.result = 0; - break; - - case FPIPE_FLUSH_DRIVER_STATS: - init_chan_statistics(chan); - init_global_statistics(card); - mbox->cmd.length = 0; - break; - - case FPIPE_ROUTER_UP_TIME: - do_gettimeofday(&tv); - chan->router_up_time = tv.tv_sec - - chan->router_start_time; - *(unsigned long *)&fr_udp_pkt->data = - chan->router_up_time; - mbox->cmd.length = fr_udp_pkt->cblock.length = 4; - fr_udp_pkt->cblock.result = 0; - break; - - case FPIPE_DRIVER_STAT_IFSEND: - memcpy(fr_udp_pkt->data, - &chan->drvstats_if_send.if_send_entry, - sizeof(if_send_stat_t)); - mbox->cmd.length = fr_udp_pkt->cblock.length =sizeof(if_send_stat_t); - fr_udp_pkt->cblock.result = 0; - break; - - case FPIPE_DRIVER_STAT_INTR: - - memcpy(fr_udp_pkt->data, - &card->statistics.isr_entry, - sizeof(global_stats_t)); - - memcpy(&fr_udp_pkt->data[sizeof(global_stats_t)], - &chan->drvstats_rx_intr.rx_intr_no_socket, - sizeof(rx_intr_stat_t)); - - mbox->cmd.length = fr_udp_pkt->cblock.length = - sizeof(global_stats_t) + - sizeof(rx_intr_stat_t); - fr_udp_pkt->cblock.result = 0; - break; - - case FPIPE_DRIVER_STAT_GEN: - memcpy(fr_udp_pkt->data, - &chan->drvstats_gen.UDP_PIPE_mgmt_kmalloc_err, - sizeof(pipe_mgmt_stat_t)); - - memcpy(&fr_udp_pkt->data[sizeof(pipe_mgmt_stat_t)], - &card->statistics, sizeof(global_stats_t)); - - mbox->cmd.length = fr_udp_pkt->cblock.length = sizeof(global_stats_t)+ - sizeof(rx_intr_stat_t); - fr_udp_pkt->cblock.result = 0; - break; - - - case FR_FT1_STATUS_CTRL: - if(fr_udp_pkt->data[0] == 1) { - if(rCount++ != 0 ){ - fr_udp_pkt->cblock.result = 0; - mbox->cmd.length = 1; - break; - } - } - - /* Disable FT1 MONITOR STATUS */ - if(fr_udp_pkt->data[0] == 0) { - if( --rCount != 0) { - fr_udp_pkt->cblock.result = 0; - mbox->cmd.length = 1; - break; - } - } - goto udp_mgmt_dflt; - - - default: -udp_mgmt_dflt: - do { - memcpy(&mbox->cmd, - &fr_udp_pkt->cblock.command, - sizeof(fr_cmd_t)); - if(mbox->cmd.length) { - memcpy(&mbox->data, - (char *)fr_udp_pkt->data, - mbox->cmd.length); - } - - err = sdla_exec(mbox) ? mbox->cmd.result : - CMD_TIMEOUT; - } while (err && c_retry-- && fr_event(card, err, mbox)); - - if(!err) - chan->drvstats_gen. - UDP_PIPE_mgmt_adptr_cmnd_OK ++; - else - chan->drvstats_gen. - UDP_PIPE_mgmt_adptr_cmnd_timeout ++; - - /* copy the result back to our buffer */ - memcpy(&fr_udp_pkt->cblock.command, - &mbox->cmd, sizeof(fr_cmd_t)); - - if(mbox->cmd.length) { - memcpy(&fr_udp_pkt->data, - &mbox->data, mbox->cmd.length); - } - } - } - - /* Fill UDP TTL */ - fr_udp_pkt->ip_pkt.ttl = card->wandev.ttl; - len = reply_udp(card->u.f.udp_pkt_data, mbox->cmd.length); - - if(udp_pkt_src == UDP_PKT_FRM_NETWORK) { - - chan->fr_header_len=2; - chan->fr_header[0]=Q922_UI; - chan->fr_header[1]=NLPID_IP; - - err = fr_send_data_header(card, dlci, 0, len, - card->u.f.udp_pkt_data,chan->fr_header_len); - if (err){ - chan->drvstats_gen.UDP_PIPE_mgmt_adptr_send_passed ++; - }else{ - chan->drvstats_gen.UDP_PIPE_mgmt_adptr_send_failed ++; - } - - } else { - /* Allocate socket buffer */ - if((new_skb = dev_alloc_skb(len)) != NULL) { - - /* copy data into new_skb */ - buf = skb_put(new_skb, len); - memcpy(buf, card->u.f.udp_pkt_data, len); - - chan->drvstats_gen. - UDP_PIPE_mgmt_passed_to_stack ++; - new_skb->dev = dev; - new_skb->protocol = htons(ETH_P_IP); - new_skb->mac.raw = new_skb->data; - netif_rx(new_skb); - - } else { - chan->drvstats_gen.UDP_PIPE_mgmt_no_socket ++; - printk(KERN_INFO - "%s: UDP mgmt cmnd, no socket buffers available!\n", - card->devname); - } - } - - card->u.f.udp_pkt_lgth = 0; - - return 1; -} - -/*============================================================================== - * Send Inverse ARP Request - */ - -int send_inarp_request(sdla_t *card, struct net_device *dev) -{ - int err=0; - - arphdr_1490_t *ArpPacket; - arphdr_fr_t *arphdr; - fr_channel_t *chan = dev->priv; - struct in_device *in_dev; - - in_dev = dev->ip_ptr; - - if(in_dev != NULL ) { - - ArpPacket = kmalloc(sizeof(arphdr_1490_t) + sizeof(arphdr_fr_t), GFP_ATOMIC); - /* SNAP Header indicating ARP */ - ArpPacket->control = 0x03; - ArpPacket->pad = 0x00; - ArpPacket->NLPID = 0x80; - ArpPacket->OUI[0] = 0; - ArpPacket->OUI[1] = 0; - ArpPacket->OUI[2] = 0; - ArpPacket->PID = 0x0608; - - arphdr = (arphdr_fr_t *)(ArpPacket + 1); // Go to ARP Packet - - /* InARP request */ - arphdr->ar_hrd = 0x0F00; /* Frame Relay HW type */ - arphdr->ar_pro = 0x0008; /* IP Protocol */ - arphdr->ar_hln = 2; /* HW addr length */ - arphdr->ar_pln = 4; /* IP addr length */ - arphdr->ar_op = htons(0x08); /* InARP Request */ - arphdr->ar_sha = 0; /* src HW DLCI - Doesn't matter */ - if(in_dev->ifa_list != NULL) - arphdr->ar_sip = in_dev->ifa_list->ifa_local; /* Local Address */else - arphdr->ar_sip = 0; - arphdr->ar_tha = 0; /* dst HW DLCI - Doesn't matter */ - arphdr->ar_tip = 0; /* Remote Address -- what we want */ - - err = fr_send(card, chan->dlci, 0, sizeof(arphdr_1490_t) + sizeof(arphdr_fr_t), - (void *)ArpPacket); - - if (!err){ - printk(KERN_INFO "\n%s: Sending InARP request on DLCI %d.\n", - card->devname, chan->dlci); - clear_bit(ARP_CRIT,&card->wandev.critical); - } - - kfree(ArpPacket); - }else{ - printk(KERN_INFO "%s: INARP ERROR: %s doesn't have a local IP address!\n", - card->devname,dev->name); - return 1; - } - - return 0; -} - - -/*============================================================================== - * Check packet for ARP Type - */ - -int is_arp(void *buf) -{ - arphdr_1490_t *arphdr = (arphdr_1490_t *)buf; - - if (arphdr->pad == 0x00 && - arphdr->NLPID == 0x80 && - arphdr->PID == 0x0608) - return 1; - else return 0; -} - -/*============================================================================== - * Process ARP Packet Type - */ - -int process_ARP(arphdr_1490_t *ArpPacket, sdla_t *card, struct net_device* dev) -{ - - - arphdr_fr_t *arphdr = (arphdr_fr_t *)(ArpPacket + 1); /* Skip header */ - fr_rx_buf_ctl_t* frbuf = card->rxmb; - struct in_device *in_dev; - fr_channel_t *chan = dev->priv; - - /* Before we transmit ARP packet, we must check - * to see that we are not currently transmitting a - * frame (in 'if_send()') and that we are not - * already in a 'delayed transmit' state. */ - if (check_tx_status(card,dev)){ - if (net_ratelimit()){ - printk(KERN_INFO "%s: Disabling comminication to process ARP\n", - card->devname); - } - set_bit(ARP_CRIT,&card->wandev.critical); - return 0; - } - - in_dev = dev->ip_ptr; - - /* Check that IP addresses exist for our network address */ - if (in_dev == NULL || in_dev->ifa_list == NULL) - return -1; - - switch (ntohs(arphdr->ar_op)) { - - case 0x08: // Inverse ARP request -- Send Reply, add route. - - /* Check for valid Address */ - printk(KERN_INFO "%s: Recvd PtP addr -InArp Req: %u.%u.%u.%u\n", - card->devname, NIPQUAD(arphdr->ar_sip)); - - - /* Check that the network address is the same as ours, only - * if the netowrk mask is not 255.255.255.255. Otherwise - * this check would not make sense */ - - if (in_dev->ifa_list->ifa_mask != 0xFFFFFFFF && - (in_dev->ifa_list->ifa_mask & arphdr->ar_sip) != - (in_dev->ifa_list->ifa_mask & in_dev->ifa_list->ifa_local)){ - printk(KERN_INFO - "%s: Invalid PtP address. %u.%u.%u.%u InARP ignored.\n", - card->devname,NIPQUAD(arphdr->ar_sip)); - - printk(KERN_INFO "%s: mask %u.%u.%u.%u\n", - card->devname, NIPQUAD(in_dev->ifa_list->ifa_mask)); - printk(KERN_INFO "%s: local %u.%u.%u.%u\n", - card->devname,NIPQUAD(in_dev->ifa_list->ifa_local)); - return -1; - } - - if (in_dev->ifa_list->ifa_local == arphdr->ar_sip){ - printk(KERN_INFO - "%s: Local addr = PtP addr. InARP ignored.\n", - card->devname); - return -1; - } - - arphdr->ar_op = htons(0x09); /* InARP Reply */ - - /* Set addresses */ - arphdr->ar_tip = arphdr->ar_sip; - arphdr->ar_sip = in_dev->ifa_list->ifa_local; - - chan->ip_local = in_dev->ifa_list->ifa_local; - chan->ip_remote = arphdr->ar_sip; - - fr_send(card, frbuf->dlci, 0, frbuf->length, (void *)ArpPacket); - - if (test_bit(ARP_CRIT,&card->wandev.critical)){ - if (net_ratelimit()){ - printk(KERN_INFO "%s: ARP Processed Enabling Communication!\n", - card->devname); - } - } - clear_bit(ARP_CRIT,&card->wandev.critical); - - chan->ip_local = in_dev->ifa_list->ifa_local; - chan->ip_remote = arphdr->ar_sip; - - /* Add Route Flag */ - /* The route will be added in the polling routine so - that it is not interrupt context. */ - - chan->route_flag = ADD_ROUTE; - trigger_fr_poll (dev); - - break; - - case 0x09: // Inverse ARP reply - - /* Check for valid Address */ - printk(KERN_INFO "%s: Recvd PtP addr %u.%u.%u.%u -InArp Reply\n", - card->devname, NIPQUAD(arphdr->ar_sip)); - - - /* Compare network addresses, only if network mask - * is not 255.255.255.255 It would not make sense - * to perform this test if the mask was all 1's */ - - if (in_dev->ifa_list->ifa_mask != 0xffffffff && - (in_dev->ifa_list->ifa_mask & arphdr->ar_sip) != - (in_dev->ifa_list->ifa_mask & in_dev->ifa_list->ifa_local)) { - - printk(KERN_INFO "%s: Invalid PtP address. InARP ignored.\n", - card->devname); - return -1; - } - - /* Make sure that the received IP address is not - * the same as our own local address */ - if (in_dev->ifa_list->ifa_local == arphdr->ar_sip) { - printk(KERN_INFO "%s: Local addr = PtP addr. InARP ignored.\n", - card->devname); - return -1; - } - - chan->ip_local = in_dev->ifa_list->ifa_local; - chan->ip_remote = arphdr->ar_sip; - - /* Add Route Flag */ - /* The route will be added in the polling routine so - that it is not interrupt context. */ - - chan->route_flag = ADD_ROUTE; - chan->inarp = INARP_CONFIGURED; - trigger_fr_poll(dev); - - break; - default: - break; // ARP's and RARP's -- Shouldn't happen. - } - - return 0; -} - - -/*============================================================ - * trigger_fr_arp - * - * Description: - * Add an fr_arp() task into a arp - * timer handler for a specific dlci/interface. - * This will kick the fr_arp() routine - * within the specified time interval. - * - * Usage: - * This timer is used to send ARP requests at - * certain time intervals. - * Called by an interrupt to request an action - * at a later date. - */ - -static void trigger_fr_arp(struct net_device *dev) -{ - fr_channel_t* chan = dev->priv; - - mod_timer(&chan->fr_arp_timer, jiffies + chan->inarp_interval * HZ); - return; -} - - - -/*============================================================================== - * ARP Request Action - * - * This funciton is called by timer interrupt to send an arp request - * to the remote end. - */ - -static void fr_arp (unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - fr_channel_t *chan = dev->priv; - volatile sdla_t *card = chan->card; - fr508_flags_t* flags = card->flags; - - /* Send ARP packets for all devs' until - * ARP state changes to CONFIGURED */ - - if (chan->inarp == INARP_REQUEST && - chan->common.state == WAN_CONNECTED && - card->wandev.state == WAN_CONNECTED){ - set_bit(0,&chan->inarp_ready); - card->u.f.timer_int_enabled |= TMR_INT_ENABLED_ARP; - flags->imask |= FR_INTR_TIMER; - } - - return; -} - - -/*============================================================================== - * Perform the Interrupt Test by running the READ_CODE_VERSION command MAX_INTR_ - * TEST_COUNTER times. - */ -static int intr_test( sdla_t* card ) -{ - fr_mbox_t* mb = card->mbox; - int err,i; - - err = fr_set_intr_mode(card, FR_INTR_READY, card->wandev.mtu, 0 ); - - if (err == CMD_OK) { - - for ( i = 0; i < MAX_INTR_TEST_COUNTER; i++ ) { - /* Run command READ_CODE_VERSION */ - mb->cmd.length = 0; - mb->cmd.command = FR_READ_CODE_VERSION; - err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT; - if (err != CMD_OK) - fr_event(card, err, mb); - } - - } else { - return err; - } - - err = fr_set_intr_mode( card, 0, card->wandev.mtu, 0 ); - - if( err != CMD_OK ) - return err; - - return 0; -} - -/*============================================================================== - * Determine what type of UDP call it is. FPIPE8ND ? - */ -static int udp_pkt_type( struct sk_buff *skb, sdla_t* card ) -{ - fr_udp_pkt_t *fr_udp_pkt = (fr_udp_pkt_t *)skb->data; - - /* Quick HACK */ - - - if((fr_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) && - (fr_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) && - (fr_udp_pkt->udp_pkt.udp_dst_port == - ntohs(card->wandev.udp_port)) && - (fr_udp_pkt->wp_mgmt.request_reply == - UDPMGMT_REQUEST)) { - if(!strncmp(fr_udp_pkt->wp_mgmt.signature, - UDPMGMT_FPIPE_SIGNATURE, 8)){ - return UDP_FPIPE_TYPE; - } - } - return UDP_INVALID_TYPE; -} - - -/*============================================================================== - * Initializes the Statistics values in the fr_channel structure. - */ -void init_chan_statistics( fr_channel_t* chan) -{ - memset(&chan->drvstats_if_send.if_send_entry, 0, - sizeof(if_send_stat_t)); - memset(&chan->drvstats_rx_intr.rx_intr_no_socket, 0, - sizeof(rx_intr_stat_t)); - memset(&chan->drvstats_gen.UDP_PIPE_mgmt_kmalloc_err, 0, - sizeof(pipe_mgmt_stat_t)); -} - -/*============================================================================== - * Initializes the Statistics values in the Sdla_t structure. - */ -void init_global_statistics( sdla_t* card ) -{ - /* Intialize global statistics for a card */ - memset(&card->statistics.isr_entry, 0, sizeof(global_stats_t)); -} - -static void read_DLCI_IB_mapping( sdla_t* card, fr_channel_t* chan ) -{ - fr_mbox_t* mbox = card->mbox; - int retry = MAX_CMD_RETRY; - dlci_IB_mapping_t* result; - int err, counter, found; - - do { - mbox->cmd.command = FR_READ_DLCI_IB_MAPPING; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - } while (err && retry-- && fr_event(card, err, mbox)); - - if( mbox->cmd.result != 0){ - printk(KERN_INFO "%s: Read DLCI IB Mapping failed\n", - chan->name); - } - - counter = mbox->cmd.length / sizeof(dlci_IB_mapping_t); - result = (void *)mbox->data; - - found = 0; - for (; counter; --counter, ++result) { - if ( result->dlci == chan->dlci ) { - chan->IB_addr = result->addr_value; - if(card->hw.type == SDLA_S514){ - chan->dlci_int_interface = - (void*)(card->hw.dpmbase + - chan->IB_addr); - }else{ - chan->dlci_int_interface = - (void*)(card->hw.dpmbase + - (chan->IB_addr & 0x00001FFF)); - - } - found = 1; - break; - } - } - if (!found) - printk( KERN_INFO "%s: DLCI %d not found by IB MAPPING cmd\n", - card->devname, chan->dlci); -} - - - -void s508_s514_lock(sdla_t *card, unsigned long *smp_flags) -{ - if (card->hw.type != SDLA_S514){ - - spin_lock_irqsave(&card->wandev.lock, *smp_flags); - }else{ - spin_lock(&card->u.f.if_send_lock); - } - return; -} - - -void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags) -{ - if (card->hw.type != SDLA_S514){ - - spin_unlock_irqrestore (&card->wandev.lock, *smp_flags); - }else{ - spin_unlock(&card->u.f.if_send_lock); - } - return; -} - - - -/*---------------------------------------------------------------------- - RECEIVE INTERRUPT: BOTTOM HALF HANDLERS - ----------------------------------------------------------------------*/ - - -/*======================================================== - * bh_enqueue - * - * Description: - * Insert a received packet into a circular - * rx queue. This packet will be picked up - * by fr_bh() and sent up the stack to the - * user. - * - * Usage: - * This function is called by rx interrupt, - * in API mode. - * - */ - -static int bh_enqueue(struct net_device *dev, struct sk_buff *skb) -{ - /* Check for full */ - fr_channel_t* chan = dev->priv; - sdla_t *card = chan->card; - - - if (atomic_read(&chan->bh_buff_used) == MAX_BH_BUFF){ - ++card->wandev.stats.rx_dropped; - dev_kfree_skb_any(skb); - return 1; - } - - ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb; - - if (chan->bh_write == (MAX_BH_BUFF-1)){ - chan->bh_write=0; - }else{ - ++chan->bh_write; - } - - atomic_inc(&chan->bh_buff_used); - - return 0; -} - - -/*======================================================== - * trigger_fr_bh - * - * Description: - * Kick the fr_bh() handler - * - * Usage: - * rx interrupt calls this function during - * the API mode. - */ - -static void trigger_fr_bh (fr_channel_t *chan) -{ - if (!test_and_set_bit(0,&chan->tq_working)){ - wanpipe_queue_work(&chan->common.wanpipe_work); - } -} - - -/*======================================================== - * fr_bh - * - * Description: - * Frame relay receive BH handler. - * Dequeue data from the BH circular - * buffer and pass it up the API sock. - * - * Rationale: - * This fuction is used to offload the - * rx_interrupt during API operation mode. - * The fr_bh() function executes for each - * dlci/interface. - * - * Once receive interrupt copies data from the - * card into an skb buffer, the skb buffer - * is appended to a circular BH buffer. - * Then the interrupt kicks fr_bh() to finish the - * job at a later time (not within the interrupt). - * - * Usage: - * Interrupts use this to defer a task to - * a polling routine. - * - */ - -static void fr_bh(struct net_device * dev) -{ - fr_channel_t* chan = dev->priv; - sdla_t *card = chan->card; - struct sk_buff *skb; - - if (atomic_read(&chan->bh_buff_used) == 0){ - clear_bit(0, &chan->tq_working); - return; - } - - while (atomic_read(&chan->bh_buff_used)){ - - if (chan->common.sk == NULL || chan->common.func == NULL){ - clear_bit(0, &chan->tq_working); - return; - } - - skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb; - - if (skb != NULL){ - - if (chan->common.sk == NULL || chan->common.func == NULL){ - ++card->wandev.stats.rx_dropped; - ++chan->ifstats.rx_dropped; - dev_kfree_skb_any(skb); - fr_bh_cleanup(dev); - continue; - } - - if (chan->common.func(skb,dev,chan->common.sk) != 0){ - /* Sock full cannot send, queue us for - * another try */ - atomic_set(&chan->common.receive_block,1); - return; - }else{ - fr_bh_cleanup(dev); - } - }else{ - fr_bh_cleanup(dev); - } - } - clear_bit(0, &chan->tq_working); - - return; -} - -static int fr_bh_cleanup(struct net_device *dev) -{ - fr_channel_t* chan = dev->priv; - - ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL; - - if (chan->bh_read == (MAX_BH_BUFF-1)){ - chan->bh_read=0; - }else{ - ++chan->bh_read; - } - - atomic_dec(&chan->bh_buff_used); - return 0; -} - - -/*---------------------------------------------------------------------- - POLL BH HANDLERS AND KICK ROUTINES - ----------------------------------------------------------------------*/ - -/*============================================================ - * trigger_fr_poll - * - * Description: - * Add a fr_poll() task into a tq_scheduler bh handler - * for a specific dlci/interface. This will kick - * the fr_poll() routine at a later time. - * - * Usage: - * Interrupts use this to defer a taks to - * a polling routine. - * - */ -static void trigger_fr_poll(struct net_device *dev) -{ - fr_channel_t* chan = dev->priv; - schedule_work(&chan->fr_poll_work); - return; -} - - -/*============================================================ - * fr_poll - * - * Rationale: - * We cannot manipulate the routing tables, or - * ip addresses withing the interrupt. Therefore - * we must perform such actons outside an interrupt - * at a later time. - * - * Description: - * Frame relay polling routine, responsible for - * shutting down interfaces upon disconnect - * and adding/removing routes. - * - * Usage: - * This function is executed for each frame relay - * dlci/interface through a tq_schedule bottom half. - * - * trigger_fr_poll() function is used to kick - * the fr_poll routine. - */ - -static void fr_poll(struct net_device *dev) -{ - - fr_channel_t* chan; - sdla_t *card; - u8 check_gateway=0; - - if (!dev || (chan = dev->priv) == NULL) - return; - - card = chan->card; - - /* (Re)Configuraiton is in progress, stop what you are - * doing and get out */ - if (test_bit(PERI_CRIT,&card->wandev.critical)){ - return; - } - - switch (chan->common.state){ - - case WAN_DISCONNECTED: - - if (test_bit(DYN_OPT_ON,&chan->interface_down) && - !test_bit(DEV_DOWN, &chan->interface_down) && - dev->flags&IFF_UP){ - - printk(KERN_INFO "%s: Interface %s is Down.\n", - card->devname,dev->name); - change_dev_flags(dev,dev->flags&~IFF_UP); - set_bit(DEV_DOWN, &chan->interface_down); - chan->route_flag = NO_ROUTE; - - }else{ - if (chan->inarp != INARP_NONE) - process_route(dev); - } - break; - - case WAN_CONNECTED: - - if (test_bit(DYN_OPT_ON,&chan->interface_down) && - test_bit(DEV_DOWN, &chan->interface_down) && - !(dev->flags&IFF_UP)){ - - printk(KERN_INFO "%s: Interface %s is Up.\n", - card->devname,dev->name); - - change_dev_flags(dev,dev->flags|IFF_UP); - clear_bit(DEV_DOWN, &chan->interface_down); - check_gateway=1; - } - - if (chan->inarp != INARP_NONE){ - process_route(dev); - check_gateway=1; - } - - if (chan->gateway && check_gateway) - add_gateway(card,dev); - - break; - - } - - return; -} - -/*============================================================== - * check_tx_status - * - * Rationale: - * We cannot transmit from an interrupt while - * the if_send is transmitting data. Therefore, - * we must check whether the tx buffers are - * begin used, before we transmit from an - * interrupt. - * - * Description: - * Checks whether it's safe to use the transmit - * buffers. - * - * Usage: - * ARP and UDP handling routines use this function - * because, they need to transmit data during - * an interrupt. - */ - -static int check_tx_status(sdla_t *card, struct net_device *dev) -{ - - if (card->hw.type == SDLA_S514){ - if (test_bit(SEND_CRIT, (void*)&card->wandev.critical) || - test_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical)) { - return 1; - } - } - - if (netif_queue_stopped(dev) || (card->u.f.tx_interrupts_pending)) - return 1; - - return 0; -} - -/*=============================================================== - * move_dev_to_next - * - * Description: - * Move the dev pointer to the next location in the - * link list. Check if we are at the end of the - * list, if so start from the begining. - * - * Usage: - * Timer interrupt uses this function to efficiently - * step through the devices that need to send ARP data. - * - */ - -struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev) -{ - if (card->wandev.new_if_cnt != 1){ - if (!*((struct net_device **)dev->priv)) - return card->wandev.dev; - else - return *((struct net_device **)dev->priv); - } - return dev; -} - -/*============================================================== - * trigger_config_fr - * - * Rationale: - * All commands must be performed inside of a - * interrupt. - * - * Description: - * Kick the config_fr() routine throught the - * timer interrupt. - */ - - -static void trigger_config_fr (sdla_t *card) -{ - fr508_flags_t* flags = card->flags; - - card->u.f.timer_int_enabled |= TMR_INT_ENABLED_CONFIG; - flags->imask |= FR_INTR_TIMER; -} - - -/*============================================================== - * config_fr - * - * Rationale: - * All commands must be performed inside of a - * interrupt. - & - * Description: - * Configure a DLCI. This function is executed - * by a timer_interrupt. The if_open() function - * triggers it. - * - * Usage: - * new_if() collects all data necessary to - * configure the DLCI. It sets the chan->dlci_ready - * bit. When the if_open() function is executed - * it checks this bit, and if its set it triggers - * the timer interrupt to execute the config_fr() - * function. - */ - -static void config_fr (sdla_t *card) -{ - struct net_device *dev; - fr_channel_t *chan; - - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)) { - - if ((chan=dev->priv) == NULL) - continue; - - if (!test_bit(0,&chan->config_dlci)) - continue; - - clear_bit(0,&chan->config_dlci); - - /* If signalling is set to NO, then setup - * DLCI addresses right away. Don't have to wait for - * link to connect. - */ - if (card->wandev.signalling == WANOPT_NO){ - printk(KERN_INFO "%s: Signalling set to NO: Mapping DLCI's\n", - card->wandev.name); - if (fr_init_dlci(card,chan)){ - printk(KERN_INFO "%s: ERROR: Failed to configure DLCI %i !\n", - card->devname, chan->dlci); - return; - } - } - - if (card->wandev.station == WANOPT_CPE) { - - update_chan_state(dev); - - /* CPE: issue full status enquiry */ - fr_issue_isf(card, FR_ISF_FSE); - - } else { - /* FR switch: activate DLCI(s) */ - - /* For Switch emulation we have to ADD and ACTIVATE - * the DLCI(s) that were configured with the SET_DLCI_ - * CONFIGURATION command. Add and Activate will fail if - * DLCI specified is not included in the list. - * - * Also If_open is called once for each interface. But - * it does not get in here for all the interface. So - * we have to pass the entire list of DLCI(s) to add - * activate routines. - */ - - if (!check_dlci_config (card, chan)){ - fr_add_dlci(card, chan->dlci); - fr_activate_dlci(card, chan->dlci); - } - } - - card->u.f.dlci_to_dev_map[chan->dlci] = dev; - } - return; -} - - -/*============================================================== - * config_fr - * - * Rationale: - * All commands must be executed during an interrupt. - * - * Description: - * Trigger uncofig_fr() function through - * the timer interrupt. - * - */ - -static void trigger_unconfig_fr(struct net_device *dev) -{ - fr_channel_t *chan = dev->priv; - volatile sdla_t *card = chan->card; - unsigned long timeout; - fr508_flags_t* flags = card->flags; - int reset_critical=0; - - if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){ - clear_bit(PERI_CRIT,(void*)&card->wandev.critical); - reset_critical=1; - } - - /* run unconfig_dlci() function - * throught the timer interrupt */ - set_bit(0,(void*)&chan->unconfig_dlci); - card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UNCONFIG; - flags->imask |= FR_INTR_TIMER; - - /* Wait for the command to complete */ - timeout = jiffies; - for(;;) { - - if(!(card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG)) - break; - - if (time_after(jiffies, timeout + 1 * HZ)){ - card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG; - printk(KERN_INFO "%s: Failed to delete DLCI %i\n", - card->devname,chan->dlci); - break; - } - } - - if (reset_critical){ - set_bit(PERI_CRIT,(void*)&card->wandev.critical); - } -} - -/*============================================================== - * unconfig_fr - * - * Rationale: - * All commands must be executed during an interrupt. - * - * Description: - * Remove the dlci from firmware. - * This funciton is used in NODE shutdown. - */ - -static void unconfig_fr (sdla_t *card) -{ - struct net_device *dev; - fr_channel_t *chan; - - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)){ - - if ((chan=dev->priv) == NULL) - continue; - - if (!test_bit(0,&chan->unconfig_dlci)) - continue; - - clear_bit(0,&chan->unconfig_dlci); - - if (card->wandev.station == WANOPT_NODE){ - printk(KERN_INFO "%s: Unconfiguring DLCI %i\n", - card->devname,chan->dlci); - fr_delete_dlci(card,chan->dlci); - } - card->u.f.dlci_to_dev_map[chan->dlci] = NULL; - } -} - -static int setup_fr_header(struct sk_buff *skb, struct net_device* dev, - char op_mode) -{ - fr_channel_t *chan=dev->priv; - - if (op_mode == WANPIPE) { - chan->fr_header[0]=Q922_UI; - - switch (htons(skb->protocol)){ - case ETH_P_IP: - chan->fr_header[1]=NLPID_IP; - break; - default: - return -EINVAL; - } - - return 2; - } - - /* If we are in bridging mode, we must apply - * an Ethernet header - */ - if (op_mode == BRIDGE || op_mode == BRIDGE_NODE) { - /* Encapsulate the packet as a bridged Ethernet frame. */ -#ifdef DEBUG - printk(KERN_INFO "%s: encapsulating skb for frame relay\n", - dev->name); -#endif - chan->fr_header[0] = 0x03; - chan->fr_header[1] = 0x00; - chan->fr_header[2] = 0x80; - chan->fr_header[3] = 0x00; - chan->fr_header[4] = 0x80; - chan->fr_header[5] = 0xC2; - chan->fr_header[6] = 0x00; - chan->fr_header[7] = 0x07; - - /* Yuck. */ - skb->protocol = ETH_P_802_3; - return 8; - } - - return 0; -} - - -static int check_dlci_config (sdla_t *card, fr_channel_t *chan) -{ - fr_mbox_t* mbox = card->mbox; - int err=0; - fr_conf_t *conf=NULL; - unsigned short dlci_num = chan->dlci; - int dlci_offset=0; - struct net_device *dev = NULL; - - mbox->cmd.command = FR_READ_CONFIG; - mbox->cmd.length = 0; - mbox->cmd.dlci = dlci_num; - - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - if (err == CMD_OK){ - return 0; - } - - for (dev = card->wandev.dev; dev; - dev=*((struct net_device **)dev->priv)) - set_chan_state(dev,WAN_DISCONNECTED); - - printk(KERN_INFO "DLCI %i Not configured, configuring\n",dlci_num); - - mbox->cmd.command = FR_COMM_DISABLE; - mbox->cmd.length = 0; - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - if (err != CMD_OK){ - fr_event(card, err, mbox); - return 2; - } - - printk(KERN_INFO "Disabled Communications \n"); - - mbox->cmd.command = FR_READ_CONFIG; - mbox->cmd.length = 0; - mbox->cmd.dlci = 0; - - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - if (err != CMD_OK){ - fr_event(card, err, mbox); - return 2; - } - - conf = (fr_conf_t *)mbox->data; - - dlci_offset=0; - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)) { - fr_channel_t *chan_tmp = dev->priv; - conf->dlci[dlci_offset] = chan_tmp->dlci; - dlci_offset++; - } - - printk(KERN_INFO "Got Fr configuration Buffer Length is %x Dlci %i Dlci Off %i\n", - mbox->cmd.length, - mbox->cmd.length > 0x20 ? conf->dlci[0] : -1, - dlci_offset ); - - mbox->cmd.length = 0x20 + dlci_offset*2; - - mbox->cmd.command = FR_SET_CONFIG; - mbox->cmd.dlci = 0; - - err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; - - if (err != CMD_OK){ - fr_event(card, err, mbox); - return 2; - } - - initialize_rx_tx_buffers (card); - - - printk(KERN_INFO "Configuraiton Succeded for new DLCI %i\n",dlci_num); - - if (fr_comm_enable (card)){ - return 2; - } - - printk(KERN_INFO "Enabling Communications \n"); - - for (dev = card->wandev.dev; dev; - dev = *((struct net_device **)dev->priv)) { - fr_channel_t *chan_tmp = dev->priv; - fr_init_dlci(card,chan_tmp); - fr_add_dlci(card, chan_tmp->dlci); - fr_activate_dlci(card, chan_tmp->dlci); - } - - printk(KERN_INFO "END OF CONFIGURAITON %i\n",dlci_num); - - return 1; -} - -static void initialize_rx_tx_buffers (sdla_t *card) -{ - fr_buf_info_t* buf_info; - - if (card->hw.type == SDLA_S514) { - - buf_info = (void*)(card->hw.dpmbase + FR_MB_VECTOR + - FR508_RXBC_OFFS); - - card->rxmb = (void*)(buf_info->rse_next + card->hw.dpmbase); - - card->u.f.rxmb_base = - (void*)(buf_info->rse_base + card->hw.dpmbase); - - card->u.f.rxmb_last = - (void*)(buf_info->rse_base + - (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) + - card->hw.dpmbase); - }else{ - buf_info = (void*)(card->hw.dpmbase + FR508_RXBC_OFFS); - - card->rxmb = (void*)(buf_info->rse_next - - FR_MB_VECTOR + card->hw.dpmbase); - - card->u.f.rxmb_base = - (void*)(buf_info->rse_base - - FR_MB_VECTOR + card->hw.dpmbase); - - card->u.f.rxmb_last = - (void*)(buf_info->rse_base + - (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) - - FR_MB_VECTOR + card->hw.dpmbase); - } - - card->u.f.rx_base = buf_info->buf_base; - card->u.f.rx_top = buf_info->buf_top; - - card->u.f.tx_interrupts_pending = 0; - - return; -} - - - -MODULE_LICENSE("GPL"); - -/****** End *****************************************************************/ |