diff options
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/broadcom/b44.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 39 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/davicom/dm9000.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/ibm/ehea/ehea.h | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/ibm/ehea/ehea_main.c | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/ibm/iseries_veth.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/jme.c | 113 | ||||
-rw-r--r-- | drivers/net/ethernet/jme.h | 19 | ||||
-rw-r--r-- | drivers/net/ethernet/qlogic/qlge/qlge.h | 8 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 |
12 files changed, 190 insertions, 21 deletions
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 4cf835dbc122..3fb66d09ece5 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp) skb->len, DMA_TO_DEVICE); rp->skb = NULL; - dev_kfree_skb(skb); + dev_kfree_skb_irq(skb); } bp->tx_cons = cons; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index bce203fa4b9e..882f48f0a03c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10327,6 +10327,43 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, return 0; } + +static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + u16 temp; + + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL1); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp &= 0xff00; + + DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode); + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + temp |= 0x00ee; + break; + case LED_MODE_OPER: + temp |= 0x0001; + break; + case LED_MODE_ON: + temp |= 0x00ff; + break; + default: + break; + } + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + return; +} + + static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -11103,7 +11140,7 @@ static struct bnx2x_phy phy_54618se = { .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, + .set_link_led = (set_link_led_t)bnx2x_5461x_set_link_led, .phy_specific_func = (phy_specific_func_t)NULL }; /*****************************************************************/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index fc7bd0f23c0b..e58073ef33b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6990,6 +6990,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_REG_INTR_MASK 0x1b #define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1) #define MDIO_REG_GPHY_SHADOW 0x1c +#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10) #define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10) #define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15) #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 438f4580bf66..2a22f5256353 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -613,7 +613,7 @@ static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w) if (!dm->wake_state) irq_set_irq_wake(dm->irq_wake, 1); - else if (dm->wake_state & !opts) + else if (dm->wake_state && !opts) irq_set_irq_wake(dm->irq_wake, 0); } diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index c520cfd3b298..5272f9d4dda9 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -24,6 +24,7 @@ config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \ ARCH_MXC || ARCH_MXS) + default ARCH_MXC || ARCH_MXS if ARM select PHYLIB ---help--- Say Y here if you want to use the built-in 10/100 Fast ethernet diff --git a/drivers/net/ethernet/ibm/ehea/ehea.h b/drivers/net/ethernet/ibm/ehea/ehea.h index 410d6a1984ed..6650068c996c 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea.h +++ b/drivers/net/ethernet/ibm/ehea/ehea.h @@ -61,9 +61,9 @@ #ifdef EHEA_SMALL_QUEUES #define EHEA_MAX_CQE_COUNT 1023 #define EHEA_DEF_ENTRIES_SQ 1023 -#define EHEA_DEF_ENTRIES_RQ1 4095 +#define EHEA_DEF_ENTRIES_RQ1 1023 #define EHEA_DEF_ENTRIES_RQ2 1023 -#define EHEA_DEF_ENTRIES_RQ3 1023 +#define EHEA_DEF_ENTRIES_RQ3 511 #else #define EHEA_MAX_CQE_COUNT 4080 #define EHEA_DEF_ENTRIES_SQ 4080 diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 37b70f7052b6..bfeccbfde236 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -371,7 +371,8 @@ static void ehea_update_stats(struct work_struct *work) out_herr: free_page((unsigned long)cb2); resched: - schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000)); + schedule_delayed_work(&port->stats_work, + round_jiffies_relative(msecs_to_jiffies(1000))); } static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes) @@ -2434,7 +2435,8 @@ static int ehea_open(struct net_device *dev) } mutex_unlock(&port->port_lock); - schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000)); + schedule_delayed_work(&port->stats_work, + round_jiffies_relative(msecs_to_jiffies(1000))); return ret; } diff --git a/drivers/net/ethernet/ibm/iseries_veth.c b/drivers/net/ethernet/ibm/iseries_veth.c index 4326681df382..acc31af6594a 100644 --- a/drivers/net/ethernet/ibm/iseries_veth.c +++ b/drivers/net/ethernet/ibm/iseries_veth.c @@ -1421,7 +1421,7 @@ static void veth_receive(struct veth_lpar_connection *cnx, /* FIXME: do we need this? */ memset(local_list, 0, sizeof(local_list)); - memset(remote_list, 0, sizeof(VETH_MAX_FRAMES_PER_MSG)); + memset(remote_list, 0, sizeof(remote_list)); /* a 0 address marks the end of the valid entries */ if (senddata->addr[startchunk] == 0) diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 7becff1f387d..76b84573566b 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1745,6 +1745,112 @@ jme_phy_off(struct jme_adapter *jme) } static int +jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_READ | specreg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); + return jme_mdio_read(jme->dev, jme->mii_if.phy_id, + JM_PHY_SPEC_DATA_REG); +} + +static void +jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG, + phy_data); + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); +} + +static int +jme_phy_calibration(struct jme_adapter *jme) +{ + u32 ctrl1000, phy_data; + + jme_phy_off(jme); + jme_phy_on(jme); + /* Enabel PHY test mode 1 */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + ctrl1000 |= PHY_GAD_TEST_MODE_1; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0; + phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH | + JM_PHY_EXT_COMM_2_CALI_ENABLE; + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + msleep(20); + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE | + JM_PHY_EXT_COMM_2_CALI_MODE_0 | + JM_PHY_EXT_COMM_2_CALI_LATCH); + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + + /* Disable PHY test mode */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + return 0; +} + +static int +jme_phy_setEA(struct jme_adapter *jme) +{ + u32 phy_comm0 = 0, phy_comm1 = 0; + u8 nic_ctrl; + + pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl); + if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE) + return 0; + + switch (jme->pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMC250: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + break; + case PCI_DEVICE_ID_JMICRON_JMC260: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0)) + phy_comm0 = 0x608A; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2)) + phy_comm0 = 0x408A; + break; + default: + return -ENODEV; + } + if (phy_comm0) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0); + if (phy_comm1) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1); + + return 0; +} + +static int jme_open(struct net_device *netdev) { struct jme_adapter *jme = netdev_priv(netdev); @@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_reset_link(jme); return 0; @@ -3184,7 +3291,8 @@ jme_resume(struct device *dev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_start_irq(jme); netif_device_attach(netdev); @@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, jme_pci_tbl); - diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 02ea27c1dcb5..4304072bd3c5 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -760,6 +760,25 @@ enum jme_rxmcs_bits { RXMCS_CHECKSUM, }; +/* Extern PHY common register 2 */ + +#define PHY_GAD_TEST_MODE_1 0x00002000 +#define PHY_GAD_TEST_MODE_MSK 0x0000E000 +#define JM_PHY_SPEC_REG_READ 0x00004000 +#define JM_PHY_SPEC_REG_WRITE 0x00008000 +#define PHY_CALIBRATION_DELAY 20 +#define JM_PHY_SPEC_ADDR_REG 0x1E +#define JM_PHY_SPEC_DATA_REG 0x1F + +#define JM_PHY_EXT_COMM_0_REG 0x30 +#define JM_PHY_EXT_COMM_1_REG 0x31 +#define JM_PHY_EXT_COMM_2_REG 0x32 +#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01 +#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02 +#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10 +#define PCI_PRIV_SHARE_NICCTRL 0xF5 +#define JME_FLAG_PHYEA_ENABLE 0x2 + /* * Wakeup Frame setup interface registers */ diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h index 8731f79c9efc..b8478aab050e 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge.h +++ b/drivers/net/ethernet/qlogic/qlge/qlge.h @@ -58,10 +58,8 @@ #define TX_DESC_PER_IOCB 8 -/* The maximum number of frags we handle is based - * on PAGE_SIZE... - */ -#if (PAGE_SHIFT == 12) || (PAGE_SHIFT == 13) /* 4k & 8k pages */ + +#if ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) > 0 #define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) #else /* all other page sizes */ #define TX_DESC_PER_OAL 0 @@ -1353,7 +1351,7 @@ struct tx_ring_desc { struct ob_mac_iocb_req *queue_entry; u32 index; struct oal oal; - struct map_list map[MAX_SKB_FRAGS + 1]; + struct map_list map[MAX_SKB_FRAGS + 2]; int map_cnt; struct tx_ring_desc *next; }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8ea770a89f25..72cd190b9c1a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -781,10 +781,15 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv) unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET | MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; - /* Do not manage MMC IRQ (FIXME) */ + /* Mask MMC irq, counters are managed in SW and registers + * are cleared on each READ eventually. */ dwmac_mmc_intr_all_mask(priv->ioaddr); - dwmac_mmc_ctrl(priv->ioaddr, mode); - memset(&priv->mmc, 0, sizeof(struct stmmac_counters)); + + if (priv->dma_cap.rmon) { + dwmac_mmc_ctrl(priv->ioaddr, mode); + memset(&priv->mmc, 0, sizeof(struct stmmac_counters)); + } else + pr_info(" No MAC Management Counters available"); } static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) @@ -1012,8 +1017,7 @@ static int stmmac_open(struct net_device *dev) memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); priv->xstats.threshold = tc; - if (priv->dma_cap.rmon) - stmmac_mmc_setup(priv); + stmmac_mmc_setup(priv); /* Start the ball rolling... */ DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); |