3 files changed, 247 insertions, 28 deletions

diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
index 2a876c4099cd..3b1f783bf924 100644
--- a/drivers/mmc/card/Kconfig
+++ b/drivers/mmc/card/Kconfig
@@ -58,12 +58,11 @@ config SDIO_UART
 
 config MMC_TEST
 	tristate "MMC host test driver"
-	default n
 	help
 	  Development driver that performs a series of reads and writes
 	  to a memory card in order to expose certain well known bugs
 	  in host controllers. The tests are executed by writing to the
-	  "test" file in sysfs under each card. Note that whatever is
+	  "test" file in debugfs under each card. Note that whatever is
 	  on your card will be overwritten by these tests.
 
 	  This driver is only of interest to those developing or
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index bfc8a8ae55df..61d233a7c118 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -621,6 +621,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 	md->disk->private_data = md;
 	md->disk->queue = md->queue.queue;
 	md->disk->driverfs_dev = &card->dev;
+	set_disk_ro(md->disk, md->read_only);
 
 	/*
 	 * As discussed on lkml, GENHD_FL_REMOVABLE should:
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 21adc27f4132..5ec8eddfcf6e 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -88,6 +88,7 @@ struct mmc_test_area {
  * @sectors: amount of sectors to check in one group
  * @ts: time values of transfer
  * @rate: calculated transfer rate
+ * @iops: I/O operations per second (times 100)
  */
 struct mmc_test_transfer_result {
 	struct list_head link;
@@ -95,6 +96,7 @@ struct mmc_test_transfer_result {
 	unsigned int sectors;
 	struct timespec ts;
 	unsigned int rate;
+	unsigned int iops;
 };
 
 /**
@@ -226,9 +228,10 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
 
 		if (!busy && mmc_test_busy(&cmd)) {
 			busy = 1;
-			printk(KERN_INFO "%s: Warning: Host did not "
-				"wait for busy state to end.\n",
-				mmc_hostname(test->card->host));
+			if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+				printk(KERN_INFO "%s: Warning: Host did not "
+					"wait for busy state to end.\n",
+					mmc_hostname(test->card->host));
 		}
 	} while (mmc_test_busy(&cmd));
 
@@ -494,7 +497,7 @@ static unsigned int mmc_test_rate(uint64_t bytes, struct timespec *ts)
  */
 static void mmc_test_save_transfer_result(struct mmc_test_card *test,
 	unsigned int count, unsigned int sectors, struct timespec ts,
-	unsigned int rate)
+	unsigned int rate, unsigned int iops)
 {
 	struct mmc_test_transfer_result *tr;
 
@@ -509,6 +512,7 @@ static void mmc_test_save_transfer_result(struct mmc_test_card *test,
 	tr->sectors = sectors;
 	tr->ts = ts;
 	tr->rate = rate;
+	tr->iops = iops;
 
 	list_add_tail(&tr->link, &test->gr->tr_lst);
 }
@@ -519,20 +523,22 @@ static void mmc_test_save_transfer_result(struct mmc_test_card *test,
 static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
 				struct timespec *ts1, struct timespec *ts2)
 {
-	unsigned int rate, sectors = bytes >> 9;
+	unsigned int rate, iops, sectors = bytes >> 9;
 	struct timespec ts;
 
 	ts = timespec_sub(*ts2, *ts1);
 
 	rate = mmc_test_rate(bytes, &ts);
+	iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
 
 	printk(KERN_INFO "%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
-			 "seconds (%u kB/s, %u KiB/s)\n",
+			 "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
 			 mmc_hostname(test->card->host), sectors, sectors >> 1,
 			 (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
-			 (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024);
+			 (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
+			 iops / 100, iops % 100);
 
-	mmc_test_save_transfer_result(test, 1, sectors, ts, rate);
+	mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
 }
 
 /*
@@ -542,22 +548,24 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
 				    unsigned int count, struct timespec *ts1,
 				    struct timespec *ts2)
 {
-	unsigned int rate, sectors = bytes >> 9;
+	unsigned int rate, iops, sectors = bytes >> 9;
 	uint64_t tot = bytes * count;
 	struct timespec ts;
 
 	ts = timespec_sub(*ts2, *ts1);
 
 	rate = mmc_test_rate(tot, &ts);
+	iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
 
 	printk(KERN_INFO "%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
-			 "%lu.%09lu seconds (%u kB/s, %u KiB/s)\n",
+			 "%lu.%09lu seconds (%u kB/s, %u KiB/s, "
+			 "%u.%02u IOPS)\n",
 			 mmc_hostname(test->card->host), count, sectors, count,
 			 sectors >> 1, (sectors & 1 ? ".5" : ""),
 			 (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
-			 rate / 1000, rate / 1024);
+			 rate / 1000, rate / 1024, iops / 100, iops % 100);
 
-	mmc_test_save_transfer_result(test, count, sectors, ts, rate);
+	mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
 }
 
 /*
@@ -1425,28 +1433,29 @@ static int mmc_test_area_cleanup(struct mmc_test_card *test)
 }
 
 /*
- * Initialize an area for testing large transfers.  The size of the area is the
- * preferred erase size which is a good size for optimal transfer speed.  Note
- * that is typically 4MiB for modern cards.  The test area is set to the middle
- * of the card because cards may have different charateristics at the front
- * (for FAT file system optimization).  Optionally, the area is erased (if the
- * card supports it) which may improve write performance.  Optionally, the area
- * is filled with data for subsequent read tests.
+ * Initialize an area for testing large transfers.  The test area is set to the
+ * middle of the card because cards may have different charateristics at the
+ * front (for FAT file system optimization).  Optionally, the area is erased
+ * (if the card supports it) which may improve write performance.  Optionally,
+ * the area is filled with data for subsequent read tests.
  */
 static int mmc_test_area_init(struct mmc_test_card *test, int erase, int fill)
 {
 	struct mmc_test_area *t = &test->area;
-	unsigned long min_sz = 64 * 1024;
+	unsigned long min_sz = 64 * 1024, sz;
 	int ret;
 
 	ret = mmc_test_set_blksize(test, 512);
 	if (ret)
 		return ret;
 
-	if (test->card->pref_erase > TEST_AREA_MAX_SIZE >> 9)
-		t->max_sz = TEST_AREA_MAX_SIZE;
-	else
-		t->max_sz = (unsigned long)test->card->pref_erase << 9;
+	/* Make the test area size about 4MiB */
+	sz = (unsigned long)test->card->pref_erase << 9;
+	t->max_sz = sz;
+	while (t->max_sz < 4 * 1024 * 1024)
+		t->max_sz += sz;
+	while (t->max_sz > TEST_AREA_MAX_SIZE && t->max_sz > sz)
+		t->max_sz -= sz;
 
 	t->max_segs = test->card->host->max_segs;
 	t->max_seg_sz = test->card->host->max_seg_size;
@@ -1766,6 +1775,188 @@ static int mmc_test_profile_seq_trim_perf(struct mmc_test_card *test)
 	return 0;
 }
 
+static unsigned int rnd_next = 1;
+
+static unsigned int mmc_test_rnd_num(unsigned int rnd_cnt)
+{
+	uint64_t r;
+
+	rnd_next = rnd_next * 1103515245 + 12345;
+	r = (rnd_next >> 16) & 0x7fff;
+	return (r * rnd_cnt) >> 15;
+}
+
+static int mmc_test_rnd_perf(struct mmc_test_card *test, int write, int print,
+			     unsigned long sz)
+{
+	unsigned int dev_addr, cnt, rnd_addr, range1, range2, last_ea = 0, ea;
+	unsigned int ssz;
+	struct timespec ts1, ts2, ts;
+	int ret;
+
+	ssz = sz >> 9;
+
+	rnd_addr = mmc_test_capacity(test->card) / 4;
+	range1 = rnd_addr / test->card->pref_erase;
+	range2 = range1 / ssz;
+
+	getnstimeofday(&ts1);
+	for (cnt = 0; cnt < UINT_MAX; cnt++) {
+		getnstimeofday(&ts2);
+		ts = timespec_sub(ts2, ts1);
+		if (ts.tv_sec >= 10)
+			break;
+		ea = mmc_test_rnd_num(range1);
+		if (ea == last_ea)
+			ea -= 1;
+		last_ea = ea;
+		dev_addr = rnd_addr + test->card->pref_erase * ea +
+			   ssz * mmc_test_rnd_num(range2);
+		ret = mmc_test_area_io(test, sz, dev_addr, write, 0, 0);
+		if (ret)
+			return ret;
+	}
+	if (print)
+		mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2);
+	return 0;
+}
+
+static int mmc_test_random_perf(struct mmc_test_card *test, int write)
+{
+	unsigned int next;
+	unsigned long sz;
+	int ret;
+
+	for (sz = 512; sz < test->area.max_tfr; sz <<= 1) {
+		/*
+		 * When writing, try to get more consistent results by running
+		 * the test twice with exactly the same I/O but outputting the
+		 * results only for the 2nd run.
+		 */
+		if (write) {
+			next = rnd_next;
+			ret = mmc_test_rnd_perf(test, write, 0, sz);
+			if (ret)
+				return ret;
+			rnd_next = next;
+		}
+		ret = mmc_test_rnd_perf(test, write, 1, sz);
+		if (ret)
+			return ret;
+	}
+	sz = test->area.max_tfr;
+	if (write) {
+		next = rnd_next;
+		ret = mmc_test_rnd_perf(test, write, 0, sz);
+		if (ret)
+			return ret;
+		rnd_next = next;
+	}
+	return mmc_test_rnd_perf(test, write, 1, sz);
+}
+
+/*
+ * Random read performance by transfer size.
+ */
+static int mmc_test_random_read_perf(struct mmc_test_card *test)
+{
+	return mmc_test_random_perf(test, 0);
+}
+
+/*
+ * Random write performance by transfer size.
+ */
+static int mmc_test_random_write_perf(struct mmc_test_card *test)
+{
+	return mmc_test_random_perf(test, 1);
+}
+
+static int mmc_test_seq_perf(struct mmc_test_card *test, int write,
+			     unsigned int tot_sz, int max_scatter)
+{
+	unsigned int dev_addr, i, cnt, sz, ssz;
+	struct timespec ts1, ts2, ts;
+	int ret;
+
+	sz = test->area.max_tfr;
+	/*
+	 * In the case of a maximally scattered transfer, the maximum transfer
+	 * size is further limited by using PAGE_SIZE segments.
+	 */
+	if (max_scatter) {
+		struct mmc_test_area *t = &test->area;
+		unsigned long max_tfr;
+
+		if (t->max_seg_sz >= PAGE_SIZE)
+			max_tfr = t->max_segs * PAGE_SIZE;
+		else
+			max_tfr = t->max_segs * t->max_seg_sz;
+		if (sz > max_tfr)
+			sz = max_tfr;
+	}
+
+	ssz = sz >> 9;
+	dev_addr = mmc_test_capacity(test->card) / 4;
+	if (tot_sz > dev_addr << 9)
+		tot_sz = dev_addr << 9;
+	cnt = tot_sz / sz;
+	dev_addr &= 0xffff0000; /* Round to 64MiB boundary */
+
+	getnstimeofday(&ts1);
+	for (i = 0; i < cnt; i++) {
+		ret = mmc_test_area_io(test, sz, dev_addr, write,
+				       max_scatter, 0);
+		if (ret)
+			return ret;
+		dev_addr += ssz;
+	}
+	getnstimeofday(&ts2);
+
+	ts = timespec_sub(ts2, ts1);
+	mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2);
+
+	return 0;
+}
+
+static int mmc_test_large_seq_perf(struct mmc_test_card *test, int write)
+{
+	int ret, i;
+
+	for (i = 0; i < 10; i++) {
+		ret = mmc_test_seq_perf(test, write, 10 * 1024 * 1024, 1);
+		if (ret)
+			return ret;
+	}
+	for (i = 0; i < 5; i++) {
+		ret = mmc_test_seq_perf(test, write, 100 * 1024 * 1024, 1);
+		if (ret)
+			return ret;
+	}
+	for (i = 0; i < 3; i++) {
+		ret = mmc_test_seq_perf(test, write, 1000 * 1024 * 1024, 1);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+/*
+ * Large sequential read performance.
+ */
+static int mmc_test_large_seq_read_perf(struct mmc_test_card *test)
+{
+	return mmc_test_large_seq_perf(test, 0);
+}
+
+/*
+ * Large sequential write performance.
+ */
+static int mmc_test_large_seq_write_perf(struct mmc_test_card *test)
+{
+	return mmc_test_large_seq_perf(test, 1);
+}
+
 static const struct mmc_test_case mmc_test_cases[] = {
 	{
 		.name = "Basic write (no data verification)",
@@ -2005,6 +2196,34 @@ static const struct mmc_test_case mmc_test_cases[] = {
 		.cleanup = mmc_test_area_cleanup,
 	},
 
+	{
+		.name = "Random read performance by transfer size",
+		.prepare = mmc_test_area_prepare,
+		.run = mmc_test_random_read_perf,
+		.cleanup = mmc_test_area_cleanup,
+	},
+
+	{
+		.name = "Random write performance by transfer size",
+		.prepare = mmc_test_area_prepare,
+		.run = mmc_test_random_write_perf,
+		.cleanup = mmc_test_area_cleanup,
+	},
+
+	{
+		.name = "Large sequential read into scattered pages",
+		.prepare = mmc_test_area_prepare,
+		.run = mmc_test_large_seq_read_perf,
+		.cleanup = mmc_test_area_cleanup,
+	},
+
+	{
+		.name = "Large sequential write from scattered pages",
+		.prepare = mmc_test_area_prepare,
+		.run = mmc_test_large_seq_write_perf,
+		.cleanup = mmc_test_area_cleanup,
+	},
+
 };
 
 static DEFINE_MUTEX(mmc_test_lock);
@@ -2148,11 +2367,11 @@ static int mtf_test_show(struct seq_file *sf, void *data)
 		seq_printf(sf, "Test %d: %d\n", gr->testcase + 1, gr->result);
 
 		list_for_each_entry(tr, &gr->tr_lst, link) {
-			seq_printf(sf, "%u %d %lu.%09lu %u\n",
+			seq_printf(sf, "%u %d %lu.%09lu %u %u.%02u\n",
 				tr->count, tr->sectors,
 				(unsigned long)tr->ts.tv_sec,
 				(unsigned long)tr->ts.tv_nsec,
-				tr->rate);
+				tr->rate, tr->iops / 100, tr->iops % 100);
 		}
 	}