diff options
Diffstat (limited to 'drivers/isdn/i4l/Kconfig')
| -rw-r--r-- | drivers/isdn/i4l/Kconfig | 129 |
1 files changed, 0 insertions, 129 deletions
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig deleted file mode 100644 index caa1b52f06f7..000000000000 --- a/drivers/isdn/i4l/Kconfig +++ /dev/null @@ -1,129 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Old ISDN4Linux config -# - -if ISDN_I4L - -config ISDN_PPP - bool "Support synchronous PPP" - depends on INET - select SLHC - help - Over digital connections such as ISDN, there is no need to - synchronize sender and recipient's clocks with start and stop bits - as is done over analog telephone lines. Instead, one can use - "synchronous PPP". Saying Y here will include this protocol. This - protocol is used by Cisco and Sun for example. So you want to say Y - here if the other end of your ISDN connection supports it. You will - need a special version of pppd (called ipppd) for using this - feature. See <file:Documentation/isdn/README.syncppp> and - <file:Documentation/isdn/syncPPP.FAQ> for more information. - -config ISDN_PPP_VJ - bool "Use VJ-compression with synchronous PPP" - depends on ISDN_PPP - help - This enables Van Jacobson header compression for synchronous PPP. - Say Y if the other end of the connection supports it. - -config ISDN_MPP - bool "Support generic MP (RFC 1717)" - depends on ISDN_PPP - help - With synchronous PPP enabled, it is possible to increase throughput - by bundling several ISDN-connections, using this protocol. See - <file:Documentation/isdn/README.syncppp> for more information. - -config IPPP_FILTER - bool "Filtering for synchronous PPP" - depends on ISDN_PPP - help - Say Y here if you want to be able to filter the packets passing over - IPPP interfaces. This allows you to control which packets count as - activity (i.e. which packets will reset the idle timer or bring up - a demand-dialled link) and which packets are to be dropped entirely. - You need to say Y here if you wish to use the pass-filter and - active-filter options to ipppd. - -config ISDN_PPP_BSDCOMP - tristate "Support BSD compression" - depends on ISDN_PPP - help - Support for the BSD-Compress compression method for PPP, which uses - the LZW compression method to compress each PPP packet before it is - sent over the wire. The machine at the other end of the PPP link - (usually your ISP) has to support the BSD-Compress compression - method as well for this to be useful. Even if they don't support it, - it is safe to say Y here. - -config ISDN_AUDIO - bool "Support audio via ISDN" - help - If you say Y here, the modem-emulator will support a subset of the - EIA Class 8 Voice commands. Using a getty with voice-support - (mgetty+sendfax by <gert@greenie.muc.de> with an extension, available - with the ISDN utility package for example), you will be able to use - your Linux box as an ISDN-answering machine. Of course, this must be - supported by the lowlevel driver also. Currently, the HiSax driver - is the only voice-supporting driver. See - <file:Documentation/isdn/README.audio> for more information. - -config ISDN_TTY_FAX - bool "Support AT-Fax Class 1 and 2 commands" - depends on ISDN_AUDIO - help - If you say Y here, the modem-emulator will support a subset of the - Fax Class 1 and 2 commands. Using a getty with fax-support - (mgetty+sendfax, hylafax), you will be able to use your Linux box as - an ISDN-fax-machine. This must be supported by the lowlevel driver - also. See <file:Documentation/isdn/README.fax> for more information. - -config ISDN_X25 - bool "X.25 PLP on top of ISDN" - depends on X25 - help - This feature provides the X.25 protocol over ISDN connections. - See <file:Documentation/isdn/README.x25> for more information - if you are thinking about using this. - - -menu "ISDN feature submodules" - -config ISDN_DRV_LOOP - tristate "isdnloop support" - depends on BROKEN_ON_SMP - help - This driver provides a virtual ISDN card. Its primary purpose is - testing of linklevel features or configuration without getting - charged by your service-provider for lots of phone calls. - You need will need the loopctrl utility from the latest isdn4k-utils - package to set up this driver. - -config ISDN_DIVERSION - tristate "Support isdn diversion services" - help - This option allows you to use some supplementary diversion - services in conjunction with the HiSax driver on an EURO/DSS1 - line. - - Supported options are CD (call deflection), CFU (Call forward - unconditional), CFB (Call forward when busy) and CFNR (call forward - not reachable). Additionally the actual CFU, CFB and CFNR state may - be interrogated. - - The use of CFU, CFB, CFNR and interrogation may be limited to some - countries. The keypad protocol is still not implemented. CD should - work in all countries if the service has been subscribed to. - - Please read the file <file:Documentation/isdn/README.diversion>. - -endmenu - -comment "ISDN4Linux hardware drivers" - -source "drivers/isdn/hisax/Kconfig" - -# end ISDN_I4L -endif - |