1 files changed, 512 insertions, 0 deletions

diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
new file mode 100644
index 000000000000..63aea2f010d9
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -0,0 +1,512 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "gma_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include <asm/mrst.h>
+#include <asm/intel_scu_ipc.h>
+#include "mid_bios.h"
+#include "intel_bios.h"
+
+static int oaktrail_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	if (dev_priv->iLVDS_enable)
+		oaktrail_lvds_init(dev, &dev_priv->mode_dev);
+	else
+		dev_err(dev->dev, "DSI is not supported\n");
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
+	return 0;
+}
+
+/*
+ *	Provide the low level interfaces for the Moorestown backlight
+ */
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+#define BLC_ADJUSTMENT_MAX 100
+
+static struct backlight_device *oaktrail_backlight_device;
+static int oaktrail_brightness;
+
+static int oaktrail_set_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int level = bd->props.brightness;
+	u32 blc_pwm_ctl;
+	u32 max_pwm_blc;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	if (gma_power_begin(dev, 0)) {
+		/* Calculate and set the brightness value */
+		max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
+		blc_pwm_ctl = level * max_pwm_blc / 100;
+
+		/* Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj1;
+		 */
+		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
+		blc_pwm_ctl = blc_pwm_ctl / 100;
+
+		/* Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj2;
+		 */
+		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
+		blc_pwm_ctl = blc_pwm_ctl / 100;
+
+		/* force PWM bit on */
+		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
+		REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
+		gma_power_end(dev);
+	}
+	oaktrail_brightness = level;
+	return 0;
+}
+
+static int oaktrail_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return oaktrail_brightness;
+}
+
+static int device_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
+	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
+	bl_max_freq = 256;
+	/* this needs to be set elsewhere */
+	blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
+			return -ERANGE;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
+		REG_WRITE(BLC_PWM_CTL, value | (value << 16));
+		gma_power_end(dev);
+	}
+	return 0;
+}
+
+static const struct backlight_ops oaktrail_ops = {
+	.get_brightness = oaktrail_get_brightness,
+	.update_status  = oaktrail_set_brightness,
+};
+
+int oaktrail_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
+				NULL, (void *)dev, &oaktrail_ops, &props);
+
+	if (IS_ERR(oaktrail_backlight_device))
+		return PTR_ERR(oaktrail_backlight_device);
+
+	ret = device_backlight_init(dev);
+	if (ret < 0) {
+		backlight_device_unregister(oaktrail_backlight_device);
+		return ret;
+	}
+	oaktrail_backlight_device->props.brightness = 100;
+	oaktrail_backlight_device->props.max_brightness = 100;
+	backlight_update_status(oaktrail_backlight_device);
+	dev_priv->backlight_device = oaktrail_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Moorestown specific chip logic and low level methods
+ *	for power management
+ */
+
+static void oaktrail_init_pm(struct drm_device *dev)
+{
+}
+
+/**
+ *	oaktrail_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ */
+static int oaktrail_save_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int i;
+	u32 pp_stat;
+
+	/* Display arbitration control + watermarks */
+	dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
+	dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
+	dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
+	dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
+	dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
+	dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
+	dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
+	dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+	/* Pipe & plane A info */
+	dev_priv->savePIPEACONF = PSB_RVDC32(PIPEACONF);
+	dev_priv->savePIPEASRC = PSB_RVDC32(PIPEASRC);
+	dev_priv->saveFPA0 = PSB_RVDC32(MRST_FPA0);
+	dev_priv->saveFPA1 = PSB_RVDC32(MRST_FPA1);
+	dev_priv->saveDPLL_A = PSB_RVDC32(MRST_DPLL_A);
+	dev_priv->saveHTOTAL_A = PSB_RVDC32(HTOTAL_A);
+	dev_priv->saveHBLANK_A = PSB_RVDC32(HBLANK_A);
+	dev_priv->saveHSYNC_A = PSB_RVDC32(HSYNC_A);
+	dev_priv->saveVTOTAL_A = PSB_RVDC32(VTOTAL_A);
+	dev_priv->saveVBLANK_A = PSB_RVDC32(VBLANK_A);
+	dev_priv->saveVSYNC_A = PSB_RVDC32(VSYNC_A);
+	dev_priv->saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
+	dev_priv->saveDSPACNTR = PSB_RVDC32(DSPACNTR);
+	dev_priv->saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE);
+	dev_priv->saveDSPAADDR = PSB_RVDC32(DSPABASE);
+	dev_priv->saveDSPASURF = PSB_RVDC32(DSPASURF);
+	dev_priv->saveDSPALINOFF = PSB_RVDC32(DSPALINOFF);
+	dev_priv->saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF);
+
+	/* Save cursor regs */
+	dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
+	dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
+	dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
+
+	/* Save palette (gamma) */
+	for (i = 0; i < 256; i++)
+		dev_priv->save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2));
+
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_save(dev);
+
+	/* Save performance state */
+	dev_priv->savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
+
+	/* LVDS state */
+	dev_priv->savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
+	dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
+	dev_priv->savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
+	dev_priv->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
+	dev_priv->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
+	dev_priv->saveLVDS = PSB_RVDC32(LVDS);
+	dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
+	dev_priv->savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
+	dev_priv->savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
+	dev_priv->savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
+
+	/* HW overlay */
+	dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD);
+	dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
+	dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
+	dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
+	dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
+	dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
+	dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
+
+	/* DPST registers */
+	dev_priv->saveHISTOGRAM_INT_CONTROL_REG =
+					PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+	dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG =
+					PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
+	dev_priv->savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
+
+	if (dev_priv->iLVDS_enable) {
+		/* Shut down the panel */
+		PSB_WVDC32(0, PP_CONTROL);
+
+		do {
+			pp_stat = PSB_RVDC32(PP_STATUS);
+		} while (pp_stat & 0x80000000);
+
+		/* Turn off the plane */
+		PSB_WVDC32(0x58000000, DSPACNTR);
+		/* Trigger the plane disable */
+		PSB_WVDC32(0, DSPASURF);
+
+		/* Wait ~4 ticks */
+		msleep(4);
+
+		/* Turn off pipe */
+		PSB_WVDC32(0x0, PIPEACONF);
+		/* Wait ~8 ticks */
+		msleep(8);
+
+		/* Turn off PLLs */
+		PSB_WVDC32(0, MRST_DPLL_A);
+	}
+	return 0;
+}
+
+/**
+ *	oaktrail_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ */
+static int oaktrail_restore_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pp_stat;
+	int i;
+
+	/* Display arbitration + watermarks */
+	PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
+	PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
+	PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
+	PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
+	PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
+	PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
+	PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
+	PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
+
+	/* Make sure VGA plane is off. it initializes to on after reset!*/
+	PSB_WVDC32(0x80000000, VGACNTRL);
+
+	/* set the plls */
+	PSB_WVDC32(dev_priv->saveFPA0, MRST_FPA0);
+	PSB_WVDC32(dev_priv->saveFPA1, MRST_FPA1);
+
+	/* Actually enable it */
+	PSB_WVDC32(dev_priv->saveDPLL_A, MRST_DPLL_A);
+	DRM_UDELAY(150);
+
+	/* Restore mode */
+	PSB_WVDC32(dev_priv->saveHTOTAL_A, HTOTAL_A);
+	PSB_WVDC32(dev_priv->saveHBLANK_A, HBLANK_A);
+	PSB_WVDC32(dev_priv->saveHSYNC_A, HSYNC_A);
+	PSB_WVDC32(dev_priv->saveVTOTAL_A, VTOTAL_A);
+	PSB_WVDC32(dev_priv->saveVBLANK_A, VBLANK_A);
+	PSB_WVDC32(dev_priv->saveVSYNC_A, VSYNC_A);
+	PSB_WVDC32(dev_priv->savePIPEASRC, PIPEASRC);
+	PSB_WVDC32(dev_priv->saveBCLRPAT_A, BCLRPAT_A);
+
+	/* Restore performance mode*/
+	PSB_WVDC32(dev_priv->savePERF_MODE, MRST_PERF_MODE);
+
+	/* Enable the pipe*/
+	if (dev_priv->iLVDS_enable)
+		PSB_WVDC32(dev_priv->savePIPEACONF, PIPEACONF);
+
+	/* Set up the plane*/
+	PSB_WVDC32(dev_priv->saveDSPALINOFF, DSPALINOFF);
+	PSB_WVDC32(dev_priv->saveDSPASTRIDE, DSPASTRIDE);
+	PSB_WVDC32(dev_priv->saveDSPATILEOFF, DSPATILEOFF);
+
+	/* Enable the plane */
+	PSB_WVDC32(dev_priv->saveDSPACNTR, DSPACNTR);
+	PSB_WVDC32(dev_priv->saveDSPASURF, DSPASURF);
+
+	/* Enable Cursor A */
+	PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR);
+	PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS);
+	PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE);
+
+	/* Restore palette (gamma) */
+	for (i = 0; i < 256; i++)
+		PSB_WVDC32(dev_priv->save_palette_a[i], PALETTE_A + (i << 2));
+
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_restore(dev);
+
+	if (dev_priv->iLVDS_enable) {
+		PSB_WVDC32(dev_priv->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
+		PSB_WVDC32(dev_priv->saveLVDS, LVDS); /*port 61180h*/
+		PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL);
+		PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
+		PSB_WVDC32(dev_priv->savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
+		PSB_WVDC32(dev_priv->saveBLC_PWM_CTL, BLC_PWM_CTL);
+		PSB_WVDC32(dev_priv->savePP_ON_DELAYS, LVDSPP_ON);
+		PSB_WVDC32(dev_priv->savePP_OFF_DELAYS, LVDSPP_OFF);
+		PSB_WVDC32(dev_priv->savePP_DIVISOR, PP_CYCLE);
+		PSB_WVDC32(dev_priv->savePP_CONTROL, PP_CONTROL);
+	}
+
+	/* Wait for cycle delay */
+	do {
+		pp_stat = PSB_RVDC32(PP_STATUS);
+	} while (pp_stat & 0x08000000);
+
+	/* Wait for panel power up */
+	do {
+		pp_stat = PSB_RVDC32(PP_STATUS);
+	} while (pp_stat & 0x10000000);
+
+	/* Restore HW overlay */
+	PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4);
+	PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5);
+
+	/* DPST registers */
+	PSB_WVDC32(dev_priv->saveHISTOGRAM_INT_CONTROL_REG,
+						HISTOGRAM_INT_CONTROL);
+	PSB_WVDC32(dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG,
+						HISTOGRAM_LOGIC_CONTROL);
+	PSB_WVDC32(dev_priv->savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
+
+	return 0;
+}
+
+/**
+ *	oaktrail_power_down	-	power down the display island
+ *	@dev: our DRM device
+ *
+ *	Power down the display interface of our device
+ */
+static int oaktrail_power_down(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_mask ;
+	u32 pwr_sts;
+
+	pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+	outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
+
+	while (true) {
+		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & pwr_mask) == pwr_mask)
+			break;
+		else
+			udelay(10);
+	}
+	return 0;
+}
+
+/*
+ * oaktrail_power_up
+ *
+ * Restore power to the specified island(s) (powergating)
+ */
+static int oaktrail_power_up(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+	u32 pwr_sts, pwr_cnt;
+
+	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+	pwr_cnt &= ~pwr_mask;
+	outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
+
+	while (true) {
+		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & pwr_mask) == 0)
+			break;
+		else
+			udelay(10);
+	}
+	return 0;
+}
+
+
+static int oaktrail_chip_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_vbt *vbt = &dev_priv->vbt_data;
+	int ret;
+	
+	ret = mid_chip_setup(dev);
+	if (ret < 0)
+		return ret;
+	if (vbt->size == 0) {
+		/* Now pull the BIOS data */
+		gma_intel_opregion_init(dev);
+		psb_intel_init_bios(dev);
+	}
+	return 0;
+}
+
+static void oaktrail_teardown(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_vbt *vbt = &dev_priv->vbt_data;
+
+	oaktrail_hdmi_teardown(dev);
+	if (vbt->size == 0)
+		psb_intel_destroy_bios(dev);
+}
+
+const struct psb_ops oaktrail_chip_ops = {
+	.name = "Oaktrail",
+	.accel_2d = 1,
+	.pipes = 2,
+	.crtcs = 2,
+	.sgx_offset = MRST_SGX_OFFSET,
+
+	.chip_setup = oaktrail_chip_setup,
+	.chip_teardown = oaktrail_teardown,
+	.crtc_helper = &oaktrail_helper_funcs,
+	.crtc_funcs = &psb_intel_crtc_funcs,
+
+	.output_init = oaktrail_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = oaktrail_backlight_init,
+#endif
+
+	.init_pm = oaktrail_init_pm,
+	.save_regs = oaktrail_save_display_registers,
+	.restore_regs = oaktrail_restore_display_registers,
+	.power_down = oaktrail_power_down,
+	.power_up = oaktrail_power_up,
+
+	.i2c_bus = 1,
+};