diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/blacklist.c | 30 | ||||
| -rw-r--r-- | drivers/acpi/video.c | 180 |
2 files changed, 117 insertions, 93 deletions
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index cb9629638def..9515f18898b2 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -192,6 +192,12 @@ static int __init dmi_disable_osi_win7(const struct dmi_system_id *d) acpi_osi_setup("!Windows 2009"); return 0; } +static int __init dmi_disable_osi_win8(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + acpi_osi_setup("!Windows 2012"); + return 0; +} static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { { @@ -267,6 +273,30 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"), }, }, + { + .callback = dmi_disable_osi_win8, + .ident = "ASUS Zenbook Prime UX31A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "UX31A"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Dell Inspiron 15R SE", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"), + }, + }, + { + .callback = dmi_disable_osi_win8, + .ident = "Lenovo ThinkPad Edge E530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "3259A2G"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index c86fc0c70ff6..aebcf6355df4 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1,5 +1,5 @@ /* - * video.c - ACPI Video Driver ($Revision:$) + * video.c - ACPI Video Driver * * Copyright (C) 2004 Luming Yu <luming.yu@intel.com> * Copyright (C) 2004 Bruno Ducrot <ducrot@poupinou.org> @@ -88,7 +88,7 @@ module_param(allow_duplicates, bool, 0644); static bool use_bios_initial_backlight = 1; module_param(use_bios_initial_backlight, bool, 0644); -static int register_count = 0; +static int register_count; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device); static void acpi_video_bus_notify(struct acpi_device *device, u32 event); @@ -118,26 +118,26 @@ struct acpi_video_bus_flags { }; struct acpi_video_bus_cap { - u8 _DOS:1; /*Enable/Disable output switching */ - u8 _DOD:1; /*Enumerate all devices attached to display adapter */ - u8 _ROM:1; /*Get ROM Data */ - u8 _GPD:1; /*Get POST Device */ - u8 _SPD:1; /*Set POST Device */ - u8 _VPO:1; /*Video POST Options */ + u8 _DOS:1; /* Enable/Disable output switching */ + u8 _DOD:1; /* Enumerate all devices attached to display adapter */ + u8 _ROM:1; /* Get ROM Data */ + u8 _GPD:1; /* Get POST Device */ + u8 _SPD:1; /* Set POST Device */ + u8 _VPO:1; /* Video POST Options */ u8 reserved:2; }; struct acpi_video_device_attrib { u32 display_index:4; /* A zero-based instance of the Display */ - u32 display_port_attachment:4; /*This field differentiates the display type */ - u32 display_type:4; /*Describe the specific type in use */ - u32 vendor_specific:4; /*Chipset Vendor Specific */ - u32 bios_can_detect:1; /*BIOS can detect the device */ - u32 depend_on_vga:1; /*Non-VGA output device whose power is related to + u32 display_port_attachment:4; /* This field differentiates the display type */ + u32 display_type:4; /* Describe the specific type in use */ + u32 vendor_specific:4; /* Chipset Vendor Specific */ + u32 bios_can_detect:1; /* BIOS can detect the device */ + u32 depend_on_vga:1; /* Non-VGA output device whose power is related to the VGA device. */ - u32 pipe_id:3; /*For VGA multiple-head devices. */ - u32 reserved:10; /*Must be 0 */ - u32 device_id_scheme:1; /*Device ID Scheme */ + u32 pipe_id:3; /* For VGA multiple-head devices. */ + u32 reserved:10; /* Must be 0 */ + u32 device_id_scheme:1; /* Device ID Scheme */ }; struct acpi_video_enumerated_device { @@ -174,19 +174,17 @@ struct acpi_video_device_flags { }; struct acpi_video_device_cap { - u8 _ADR:1; /*Return the unique ID */ - u8 _BCL:1; /*Query list of brightness control levels supported */ - u8 _BCM:1; /*Set the brightness level */ + u8 _ADR:1; /* Return the unique ID */ + u8 _BCL:1; /* Query list of brightness control levels supported */ + u8 _BCM:1; /* Set the brightness level */ u8 _BQC:1; /* Get current brightness level */ u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */ - u8 _DDC:1; /*Return the EDID for this device */ + u8 _DDC:1; /* Return the EDID for this device */ }; struct acpi_video_brightness_flags { u8 _BCL_no_ac_battery_levels:1; /* no AC/Battery levels in _BCL */ - u8 _BCL_reversed:1; /* _BCL package is in a reversed order*/ - u8 _BCL_use_index:1; /* levels in _BCL are index values */ - u8 _BCM_use_index:1; /* input of _BCM is an index value */ + u8 _BCL_reversed:1; /* _BCL package is in a reversed order */ u8 _BQC_use_index:1; /* _BQC returns an index value */ }; @@ -231,21 +229,22 @@ static int acpi_video_get_next_level(struct acpi_video_device *device, static int acpi_video_switch_brightness(struct acpi_video_device *device, int event); -/*backlight device sysfs support*/ +/* backlight device sysfs support */ static int acpi_video_get_brightness(struct backlight_device *bd) { unsigned long long cur_level; int i; - struct acpi_video_device *vd = - (struct acpi_video_device *)bl_get_data(bd); + struct acpi_video_device *vd = bl_get_data(bd); if (acpi_video_device_lcd_get_level_current(vd, &cur_level, false)) return -EINVAL; for (i = 2; i < vd->brightness->count; i++) { if (vd->brightness->levels[i] == cur_level) - /* The first two entries are special - see page 575 - of the ACPI spec 3.0 */ - return i-2; + /* + * The first two entries are special - see page 575 + * of the ACPI spec 3.0 + */ + return i - 2; } return 0; } @@ -253,8 +252,7 @@ static int acpi_video_get_brightness(struct backlight_device *bd) static int acpi_video_set_brightness(struct backlight_device *bd) { int request_level = bd->props.brightness + 2; - struct acpi_video_device *vd = - (struct acpi_video_device *)bl_get_data(bd); + struct acpi_video_device *vd = bl_get_data(bd); return acpi_video_device_lcd_set_level(vd, vd->brightness->levels[request_level]); @@ -302,11 +300,11 @@ video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long st struct acpi_video_device *video = acpi_driver_data(device); int level; - if ( state >= video->brightness->count - 2) + if (state >= video->brightness->count - 2) return -EINVAL; state = video->brightness->count - state; - level = video->brightness->levels[state -1]; + level = video->brightness->levels[state - 1]; return acpi_video_device_lcd_set_level(video, level); } @@ -316,9 +314,11 @@ static const struct thermal_cooling_device_ops video_cooling_ops = { .set_cur_state = video_set_cur_state, }; -/* -------------------------------------------------------------------------- - Video Management - -------------------------------------------------------------------------- */ +/* + * -------------------------------------------------------------------------- + * Video Management + * -------------------------------------------------------------------------- + */ static int acpi_video_device_lcd_query_levels(struct acpi_video_device *device, @@ -345,7 +345,7 @@ acpi_video_device_lcd_query_levels(struct acpi_video_device *device, return 0; - err: +err: kfree(buffer.pointer); return status; @@ -542,7 +542,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, if (device->brightness->levels[i] == *level) { device->brightness->curr = *level; return 0; - } + } /* * BQC returned an invalid level. * Stop using it. @@ -552,7 +552,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, buf)); device->cap._BQC = device->cap._BCQ = 0; } else { - /* Fixme: + /* + * Fixme: * should we return an error or ignore this failure? * dev->brightness->curr is a cached value which stores * the correct current backlight level in most cases. @@ -611,8 +612,8 @@ acpi_video_device_EDID(struct acpi_video_device *device, /* * Arg: - * video : video bus device pointer - * bios_flag : + * video : video bus device pointer + * bios_flag : * 0. The system BIOS should NOT automatically switch(toggle) * the active display output. * 1. The system BIOS should automatically switch (toggle) the @@ -624,9 +625,9 @@ acpi_video_device_EDID(struct acpi_video_device *device, * lcd_flag : * 0. The system BIOS should automatically control the brightness level * of the LCD when the power changes from AC to DC - * 1. The system BIOS should NOT automatically control the brightness + * 1. The system BIOS should NOT automatically control the brightness * level of the LCD when the power changes from AC to DC. - * Return Value: + * Return Value: * -EINVAL wrong arg. */ @@ -710,8 +711,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device, /* - * Arg: - * device : video output device (LCD, CRT, ..) + * Arg: + * device : video output device (LCD, CRT, ..) * * Return Value: * Maximum brightness level @@ -799,16 +800,6 @@ acpi_video_init_brightness(struct acpi_video_device *device) br->count = count; device->brightness = br; - /* Check the input/output of _BQC/_BCL/_BCM */ - if ((max_level < 100) && (max_level <= (count - 2))) - br->flags._BCL_use_index = 1; - - /* - * _BCM is always consistent with _BCL, - * at least for all the laptops we have ever seen. - */ - br->flags._BCM_use_index = br->flags._BCL_use_index; - /* _BQC uses INDEX while _BCL uses VALUE in some laptops */ br->curr = level = max_level; @@ -870,7 +861,7 @@ out: * device : video output device (LCD, CRT, ..) * * Return Value: - * None + * None * * Find out all required AML methods defined under the output * device. @@ -900,7 +891,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) acpi_handle acpi_parent; struct device *parent = NULL; int result; - static int count = 0; + static int count; char *name; result = acpi_video_init_brightness(device); @@ -969,11 +960,11 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) } /* - * Arg: - * device : video output device (VGA) + * Arg: + * device : video output device (VGA) * * Return Value: - * None + * None * * Find out all required AML methods defined under the video bus device. */ @@ -1012,7 +1003,8 @@ static int acpi_video_bus_check(struct acpi_video_bus *video) return -ENODEV; pci_dev_put(dev); - /* Since there is no HID, CID and so on for VGA driver, we have + /* + * Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ @@ -1042,12 +1034,14 @@ static int acpi_video_bus_check(struct acpi_video_bus *video) return status; } -/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ +/* + * -------------------------------------------------------------------------- + * Driver Interface + * -------------------------------------------------------------------------- + */ /* device interface */ -static struct acpi_video_device_attrib* +static struct acpi_video_device_attrib * acpi_video_get_device_attr(struct acpi_video_bus *video, unsigned long device_id) { struct acpi_video_enumerated_device *ids; @@ -1085,7 +1079,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device, unsigned long long device_id; int status, device_type; struct acpi_video_device *data; - struct acpi_video_device_attrib* attribute; + struct acpi_video_device_attrib *attribute; status = acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); @@ -1107,7 +1101,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device, attribute = acpi_video_get_device_attr(video, device_id); - if((attribute != NULL) && attribute->device_id_scheme) { + if (attribute && attribute->device_id_scheme) { switch (attribute->display_type) { case ACPI_VIDEO_DISPLAY_CRT: data->flags.crt = 1; @@ -1125,24 +1119,24 @@ acpi_video_bus_get_one_device(struct acpi_device *device, data->flags.unknown = 1; break; } - if(attribute->bios_can_detect) + if (attribute->bios_can_detect) data->flags.bios = 1; } else { /* Check for legacy IDs */ device_type = acpi_video_get_device_type(video, device_id); /* Ignore bits 16 and 18-20 */ switch (device_type & 0xffe2ffff) { - case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR: - data->flags.crt = 1; - break; - case ACPI_VIDEO_DISPLAY_LEGACY_PANEL: - data->flags.lcd = 1; - break; - case ACPI_VIDEO_DISPLAY_LEGACY_TV: - data->flags.tvout = 1; - break; - default: - data->flags.unknown = 1; + case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR: + data->flags.crt = 1; + break; + case ACPI_VIDEO_DISPLAY_LEGACY_PANEL: + data->flags.lcd = 1; + break; + case ACPI_VIDEO_DISPLAY_LEGACY_TV: + data->flags.tvout = 1; + break; + default: + data->flags.unknown = 1; } } @@ -1165,12 +1159,12 @@ acpi_video_bus_get_one_device(struct acpi_device *device, /* * Arg: - * video : video bus device + * video : video bus device * * Return: - * none - * - * Enumerate the video device list of the video bus, + * none + * + * Enumerate the video device list of the video bus, * bind the ids with the corresponding video devices * under the video bus. */ @@ -1189,13 +1183,13 @@ static void acpi_video_device_rebind(struct acpi_video_bus *video) /* * Arg: - * video : video bus device - * device : video output device under the video - * bus + * video : video bus device + * device : video output device under the video + * bus * * Return: - * none - * + * none + * * Bind the ids with the corresponding video devices * under the video bus. */ @@ -1218,11 +1212,11 @@ acpi_video_device_bind(struct acpi_video_bus *video, /* * Arg: - * video : video bus device + * video : video bus device * * Return: - * < 0 : error - * + * < 0 : error + * * Call _DOD to enumerate all devices attached to display adapter * */ @@ -1283,7 +1277,7 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video) video->attached_array = active_list; video->attached_count = count; - out: +out: kfree(buffer.pointer); return status; } @@ -1728,7 +1722,7 @@ static int acpi_video_bus_add(struct acpi_device *device) if (!strcmp(device->pnp.bus_id, "VID")) { if (instance) device->pnp.bus_id[3] = '0' + instance; - instance ++; + instance++; } /* a hack to fix the duplicate name "VGA" problem on Pa 3553 */ if (!strcmp(device->pnp.bus_id, "VGA")) { |