diff options
Diffstat (limited to 'arch')
27 files changed, 1034 insertions, 760 deletions
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h new file mode 100644 index 000000000000..ce1ec69806a1 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - GPIO bank numbering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) + +#define S3C2410_GPIO_BANKA (32*0) +#define S3C2410_GPIO_BANKB (32*1) +#define S3C2410_GPIO_BANKC (32*2) +#define S3C2410_GPIO_BANKD (32*3) +#define S3C2410_GPIO_BANKE (32*4) +#define S3C2410_GPIO_BANKF (32*5) +#define S3C2410_GPIO_BANKG (32*6) +#define S3C2410_GPIO_BANKH (32*7) diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index 00476a573bbe..51a88cf9526b 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -23,3 +23,6 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #include <asm-generic/gpio.h> +#include <mach/gpio-nrs.h> + +#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 49efce8cd4a7..2a2384ffa7b1 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -80,7 +80,7 @@ #define IRQ_EINT22 S3C2410_IRQ(50) #define IRQ_EINT23 S3C2410_IRQ(51) - +#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) #define IRQ_LCD_FIFO S3C2410_IRQ(52) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 321077613067..35a03df473fc 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -14,16 +14,7 @@ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) -#define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) +#include <mach/gpio-nrs.h> #ifdef CONFIG_CPU_S3C2400 #define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 821a1668c3ac..7a7c4da4c256 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -203,7 +203,7 @@ static void __init h1940_map_io(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif - s3c2410_pm_init(); + s3c_pm_init(); } static void __init h1940_init_irq(void) diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 9678a53ceeb1..9f1ba9b63f70 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -355,7 +355,7 @@ static void __init qt2410_machine_init(void) s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); - s3c2410_pm_init(); + s3c_pm_init(); } MACHINE_START(QT2410, "QT2410") diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index a6970f613192..87fc481d92d4 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -37,21 +37,14 @@ #include <plat/cpu.h> #include <plat/pm.h> -#ifdef CONFIG_S3C2410_PM_DEBUG -extern void pm_dbg(const char *fmt, ...); -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) -#endif - static void s3c2410_pm_prepare(void) { /* ensure at least GSTATUS3 has the resume address */ - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3); - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); if (machine_is_h1940()) { void *base = phys_to_virt(H1940_SUSPEND_CHECK); diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index ecddbbb34832..72c266aee141 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -494,7 +494,7 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state) * correct address to resume from. */ __raw_writel(0x2BED, S3C2412_INFORM0); - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); return 0; } @@ -630,7 +630,7 @@ static void __init jive_machine_init(void) /* initialise the power management now we've setup everything. */ - s3c2410_pm_init(); + s3c_pm_init(); s3c_device_nand.dev.platform_data = &jive_nand_info; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 217e9e4ed45f..c9cfe40e21f6 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] = { static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } @@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_device *dev) tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; __raw_writel(tmp, S3C2412_PWRCFG); - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 12d378f84ad2..bc8d8d1ebd1a 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -203,7 +203,7 @@ static void __init rx3715_init_machine(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif - s3c2410_pm_init(); + s3c_pm_init(); s3c24xx_fb_set_platdata(&rx3715_fb_info); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h index ae8c0e359783..83ce2a7a9dae 100644 --- a/arch/arm/mach-s3c24a0/include/mach/irqs.h +++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h @@ -70,6 +70,8 @@ #define IRQ_EINT17 S3C2410_IRQ(49) #define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00) + /* SUB IRQS */ #define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ #define IRQ_S3CUART_TX0 S3C2410_IRQ(52) diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 39195f972d5e..8d7815d25a51 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -18,6 +18,11 @@ obj-y += pwm-clock.o obj-y += gpio.o obj-y += gpio-config.o +# PM support + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o + # devices obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h new file mode 100644 index 000000000000..3779775133a9 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -0,0 +1,174 @@ +/* linux/include/asm-arm/plat-s3c24xx/pm.h + * + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* s3c_pm_init + * + * called from board at initialisation time to setup the power + * management +*/ + +#ifdef CONFIG_PM + +extern __init int s3c_pm_init(void); + +#else + +static inline int s3c_pm_init(void) +{ + return 0; +} +#endif + +/* configuration for the IRQ mask over sleep */ +extern unsigned long s3c_irqwake_intmask; +extern unsigned long s3c_irqwake_eintmask; + +/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ +extern unsigned long s3c_irqwake_intallow; +extern unsigned long s3c_irqwake_eintallow; + +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + +/* Flags for PM Control */ + +extern unsigned long s3c_pm_flags; + +/* from sleep.S */ + +extern int s3c_cpu_save(unsigned long *saveblk); +extern void s3c_cpu_resume(void); + +extern void s3c2410_cpu_suspend(void); + +extern unsigned long s3c_sleep_save_phys; + +/* sleep save info */ + +/** + * struct sleep_save - save information for shared peripherals. + * @reg: Pointer to the register to save. + * @val: Holder for the value saved from reg. + * + * This describes a list of registers which is used by the pm core and + * other subsystem to save and restore register values over suspend. + */ +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; +}; + +/* helper functions to save/restore lists of registers. */ + +extern void s3c_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c_irqext_wake(unsigned int irqno, unsigned int state); +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c_irqext_wake NULL +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + +/* PM debug functions */ + +#ifdef CONFIG_S3C2410_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) +#else +#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) +#endif + +/* suspend memory checking */ + +#ifdef CONFIG_S3C2410_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while(0) +#define s3c_pm_check_restore() do { } while(0) +#define s3c_pm_check_cleanup() do { } while(0) +#define s3c_pm_check_store() do { } while(0) +#endif + +/** + * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ + * + * Setup all the necessary GPIO pins for waking the system on external + * interrupt. + */ +extern void s3c_pm_configure_extint(void); + +/** + * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * + * Restore the state of the GPIO pins after sleep, which may involve ensuring + * that we do not glitch the state of the pins from that the bootloader's + * resume code has done. +*/ +extern void s3c_pm_restore_gpios(void); + +/** + * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * + * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + */ +extern void s3c_pm_save_gpios(void); + +/** + * s3c_pm_cb_flushcache - callback for assembly code + * + * Callback to issue flush_cache_all() as this call is + * not a directly callable object. + */ +extern void s3c_pm_cb_flushcache(void); + +extern void s3c_pm_save_core(void); +extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c new file mode 100644 index 000000000000..39f2555564da --- /dev/null +++ b/arch/arm/plat-s3c/pm-check.c @@ -0,0 +1,242 @@ +/* linux/arch/arm/plat-s3c/pm-check.c + * originally in linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004,2006,2008 Simtec Electronics + * http://armlinux.simtec.co.uk + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Power Mangament - suspend/resume memory corruptiuon check. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/ioport.h> + +#include <plat/pm.h> + +#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#endif + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c_pm_run_res + * + * go through the given resource list, and look for system ram +*/ + +static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", + (unsigned long)ptr->start, + (unsigned long)ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", + (unsigned long)res->start, (unsigned long)res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +void s3c_pm_check_prepare(void) +{ + crc_size = 0; + + s3c_pm_run_sysram(s3c_pm_countram, &crc_size); + + S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +void s3c_pm_check_store(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contains the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +/** + * s3c_pm_runcheck() - helper to check a resource on restore. + * @res: The resource to check + * @vak: Pointer to list of CRC32 values to check. + * + * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this + * function runs the given memory resource checking it against the stored + * CRC to ensure that memory is restored. The function tries to skip as + * many of the areas used during the suspend process. + */ +static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *stkpage; + void *ptr; + u32 calc; + + stkpage = (void *)((u32)&calc & ~PAGE_MASK); + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, stkpage, 4096)) { + S3C_PMDBG("skipping %08lx, has stack in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, crcs, crc_size)) { + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + S3C_PMDBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/** + * s3c_pm_check_restore() - memory check called on resume + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ +void s3c_pm_check_restore(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_runcheck, crcs); +} + +/** + * s3c_pm_check_cleanup() - free memory resources + * + * Free the resources that where allocated by the suspend + * memory check code. We do this separately from the + * s3c_pm_check_restore() function as we cannot call any + * functions that might sleep during that resume. + */ +void s3c_pm_check_cleanup(void) +{ + kfree(crcs); + crcs = NULL; +} + diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c new file mode 100644 index 000000000000..061182ca66e3 --- /dev/null +++ b/arch/arm/plat-s3c/pm.c @@ -0,0 +1,363 @@ +/* linux/arch/arm/plat-s3c/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2004,2006,2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C common power management (suspend to ram) support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <mach/hardware.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/regs-mem.h> +#include <mach/regs-irq.h> +#include <asm/irq.h> + +#include <plat/pm.h> +#include <plat/pm-core.h> + +/* for external use */ + +unsigned long s3c_pm_flags; + +/* Debug code: + * + * This code supports debug output to the low level UARTs for use on + * resume before the console layer is available. +*/ + +#ifdef CONFIG_S3C2410_PM_DEBUG +extern void printascii(const char *); + +void s3c_pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +static inline void s3c_pm_debug_init(void) +{ + /* restart uart clocks so we can use them to output */ + s3c_pm_debug_init_uart(); +} + +#else +#define s3c_pm_debug_init() do { } while(0) + +#endif /* CONFIG_S3C2410_PM_DEBUG */ + +/* Save the UART configurations if we are configured for debug. */ + +#ifdef CONFIG_S3C2410_PM_DEBUG + +struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + save->ulcon = __raw_readl(regs + S3C2410_ULCON); + save->ucon = __raw_readl(regs + S3C2410_UCON); + save->ufcon = __raw_readl(regs + S3C2410_UFCON); + save->umcon = __raw_readl(regs + S3C2410_UMCON); + save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); +} + +static void s3c_pm_save_uarts(void) +{ + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_save_uart(uart, save); +} + +static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + __raw_writel(save->ulcon, regs + S3C2410_ULCON); + __raw_writel(save->ucon, regs + S3C2410_UCON); + __raw_writel(save->ufcon, regs + S3C2410_UFCON); + __raw_writel(save->umcon, regs + S3C2410_UMCON); + __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); +} + +static void s3c_pm_restore_uarts(void) +{ + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_restore_uart(uart, save); +} +#else +static void s3c_pm_save_uarts(void) { } +static void s3c_pm_restore_uarts(void) { } +#endif + +/* The IRQ ext-int code goes here, it is too small to currently bother + * with its own file. */ + +unsigned long s3c_irqwake_intmask = 0xffffffffL; +unsigned long s3c_irqwake_eintmask = 0xffffffffL; + +int s3c_irqext_wake(unsigned int irqno, unsigned int state) +{ + unsigned long bit = 1L << IRQ_EINT_BIT(irqno); + + if (!(s3c_irqwake_eintallow & bit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_eintmask |= bit; + else + s3c_irqwake_eintmask &= ~bit; + + return 0; +} + +/* helper functions to save and restore register state */ + +/** + * s3c_pm_do_save() - save a set of registers for restoration on resume. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Run through the list of registers given, saving their contents in the + * array for later restoration when we wakeup. + */ +void s3c_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/** + * s3c_pm_do_restore() - restore register values from the save list. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Restore the register values saved from s3c_pm_do_save(). + * + * Note, we do not use S3C_PMDBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c_pm_do_restore(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/** + * s3c_pm_do_restore_core() - early restore register values from save list. + * + * This is similar to s3c_pm_do_restore() except we try and minimise the + * side effects of the function in case registers that hardware might need + * to work has been restored. + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) + __raw_writel(ptr->val, ptr->reg); +} + +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if (which & (1L<<i)) { + S3C_PMDBG("IRQ %d asserted at resume\n", start+i); + } + } +} + + +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + +#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) + +/* s3c_pm_enter + * + * central control for sleep/resume process +*/ + +static int s3c_pm_enter(suspend_state_t state) +{ + static unsigned long regs_save[16]; + + /* ensure the debug is initialised (if enabled) */ + + s3c_pm_debug_init(); + + S3C_PMDBG("%s(%d)\n", __func__, state); + + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__); + return -EINVAL; + } + + /* check if we have anything to wake-up with... bad things seem + * to happen if you suspend with no wakeup (system will often + * require a full power-cycle) + */ + + if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { + printk(KERN_ERR "%s: No wake-up sources!\n", __func__); + printk(KERN_ERR "%s: Aborting sleep\n", __func__); + return -EINVAL; + } + + /* store the physical address of the register recovery block */ + + s3c_sleep_save_phys = virt_to_phys(regs_save); + + S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys); + + /* save all necessary core registers not covered by the drivers */ + + s3c_pm_save_gpios(); + s3c_pm_save_uarts(); + s3c_pm_save_core(); + + /* set the irq configuration for wake */ + + s3c_pm_configure_extint(); + + S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n", + s3c_irqwake_intmask, s3c_irqwake_eintmask); + + s3c_pm_arch_prepare_irqs(); + + /* call cpu specific preparation */ + + pm_cpu_prep(); + + /* flush cache back to ram */ + + flush_cache_all(); + + s3c_pm_check_store(); + + /* send the cpu to sleep... */ + + s3c_pm_arch_stop_clocks(); + + /* s3c_cpu_save will also act as our return point from when + * we resume as it saves its own register state and restores it + * during the resume. */ + + s3c_cpu_save(regs_save); + + /* restore the cpu state using the kernel's cpu init code. */ + + cpu_init(); + + /* restore the system state */ + + s3c_pm_restore_core(); + s3c_pm_restore_uarts(); + s3c_pm_restore_gpios(); + + s3c_pm_debug_init(); + + /* check what irq (if any) restored the system */ + + s3c_pm_arch_show_resume_irqs(); + + S3C_PMDBG("%s: post sleep, preparing to return\n", __func__); + + s3c_pm_check_restore(); + + /* ok, let's return from sleep */ + + S3C_PMDBG("S3C PM Resume (post-restore)\n"); + return 0; +} + +/* callback from assembly code */ +void s3c_pm_cb_flushcache(void) +{ + flush_cache_all(); +} + +static int s3c_pm_prepare(void) +{ + /* prepare check area if configured */ + + s3c_pm_check_prepare(); + return 0; +} + +static void s3c_pm_finish(void) +{ + s3c_pm_check_cleanup(); +} + +static struct platform_suspend_ops s3c_pm_ops = { + .enter = s3c_pm_enter, + .prepare = s3c_pm_prepare, + .finish = s3c_pm_finish, + .valid = suspend_valid_only_mem, +}; + +/* s3c_pm_init + * + * Attach the power management functions. This should be called + * from the board specific initialisation if the board supports + * it. +*/ + +int __init s3c_pm_init(void) +{ + printk("S3C Power Management, Copyright 2004 Simtec Electronics\n"); + + suspend_set_ops(&s3c_pm_ops); + return 0; +} diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 1e0767b266b8..636cb12711df 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 3d4837021ac7..1a8347cec20a 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -201,5 +201,5 @@ void __init smdk_machine_init(void) platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); - s3c2410_pm_init(); + s3c_pm_init(); } diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h index 45746a995343..69e1be8bec35 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -10,6 +10,12 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + #define irqdbf(x...) #define irqdbf2(x...) diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index fef8ea8b8e1e..eed8f78e7593 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -31,6 +31,8 @@ #define S3C24XX_SZ_UART SZ_1M #define S3C_UART_OFFSET (0x4000) +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + /* Timers */ #define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h new file mode 100644 index 000000000000..c75882113e04 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h @@ -0,0 +1,59 @@ +/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +static inline void s3c_pm_debug_init_uart(void) +{ + unsigned long tmp = __raw_readl(S3C2410_CLKCON); + + /* re-start uart clocks */ + tmp |= S3C2410_CLKCON_UART0; + tmp |= S3C2410_CLKCON_UART1; + tmp |= S3C2410_CLKCON_UART2; + + __raw_writel(tmp, S3C2410_CLKCON); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); + __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); + + /* ack any outstanding external interrupts before we go to sleep */ + + __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ +} + +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask); + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", + __raw_readl(S3C2410_SRCPND), + __raw_readl(S3C2410_EINTPEND)); + + s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), + s3c_irqwake_intmask); + + s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), + s3c_irqwake_eintmask); +} diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h deleted file mode 100644 index cc623667e48a..000000000000 --- a/arch/arm/plat-s3c24xx/include/plat/pm.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/pm.h - * - * Copyright (c) 2004 Simtec Electronics - * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* s3c2410_pm_init - * - * called from board at initialisation time to setup the power - * management -*/ - -#ifdef CONFIG_PM - -extern __init int s3c2410_pm_init(void); - -#else - -static inline int s3c2410_pm_init(void) -{ - return 0; -} -#endif - -/* configuration for the IRQ mask over sleep */ -extern unsigned long s3c_irqwake_intmask; -extern unsigned long s3c_irqwake_eintmask; - -/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ -extern unsigned long s3c_irqwake_intallow; -extern unsigned long s3c_irqwake_eintallow; - -/* per-cpu sleep functions */ - -extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); - -/* Flags for PM Control */ - -extern unsigned long s3c_pm_flags; - -/* from sleep.S */ - -extern int s3c2410_cpu_save(unsigned long *saveblk); -extern void s3c2410_cpu_suspend(void); -extern void s3c2410_cpu_resume(void); - -extern unsigned long s3c2410_sleep_save_phys; - -/* sleep save info */ - -struct sleep_save { - void __iomem *reg; - unsigned long val; -}; - -#define SAVE_ITEM(x) \ - { .reg = (x) } - -extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); - -#ifdef CONFIG_PM -extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); -extern int s3c24xx_irq_resume(struct sys_device *dev); -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c new file mode 100644 index 000000000000..b7acf1a8ecd2 --- /dev/null +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -0,0 +1,95 @@ +/* linux/arch/arm/plat-s3c24xx/irq-om.c + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C24XX - IRQ PM code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; +unsigned long s3c_irqwake_eintallow = 0x0000fff0L; + +int s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit = 1 << (irqno - IRQ_EINT0); + + if (!(s3c_irqwake_intallow & irqbit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + + return 0; +} + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; +} + +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 0192ecdc1442..958737775ad2 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify @@ -16,38 +16,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog: - * - * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk> - * Fixed compile warnings - * - * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn> - * Fixed s3c_extirq_type - * - * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> - * Addition of ADC/TC demux - * - * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de> - * Fix for set_irq_type() on low EINT numbers - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Tidy up KF's patch and sort out new release - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Add support for power management controls - * - * 04-Nov-2004 Ben Dooks - * Fix standard IRQ wake for EINT0..4 and RTC - * - * 22-Feb-2005 Ben Dooks - * Fixed edge-triggering on ADC IRQ - * - * 28-Jun-2005 Ben Dooks - * Mark IRQ_LCD valid - * - * 25-Jul-2005 Ben Dooks - * Split the S3C2440 IRQ code to separate file */ #include <linux/init.h> @@ -55,81 +23,16 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/sysdev.h> -#include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> - #include <asm/mach/irq.h> #include <plat/regs-irqtype.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> #include <plat/irq.h> -/* wakeup irq control */ - -#ifdef CONFIG_PM - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; -unsigned long s3c_irqwake_intmask = 0xffffffffL; -unsigned long s3c_irqwake_eintallow = 0x0000fff0L; -unsigned long s3c_irqwake_eintmask = 0xffffffffL; - -int -s3c_irq_wake(unsigned int irqno, unsigned int state) -{ - unsigned long irqbit = 1 << (irqno - IRQ_EINT0); - - if (!(s3c_irqwake_intallow & irqbit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - - return 0; -} - -static int -s3c_irqext_wake(unsigned int irqno, unsigned int state) -{ - unsigned long bit = 1L << (irqno - EXTINT_OFF); - - if (!(s3c_irqwake_eintallow & bit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_eintmask |= bit; - else - s3c_irqwake_eintmask &= ~bit; - - return 0; -} - -#else -#define s3c_irqext_wake NULL -#define s3c_irq_wake NULL -#endif - - static void s3c_irq_mask(unsigned int irqno) { @@ -590,59 +493,6 @@ s3c_irq_demux_extint4t7(unsigned int irq, } } -#ifdef CONFIG_PM - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_INTMSK), - SAVE_ITEM(S3C2410_INTSUBMSK), -}; - -/* the extint values move between the s3c2410/s3c2440 and the s3c2412 - * so we use an array to hold them, and to calculate the address of - * the register at run-time -*/ - -static unsigned long save_extint[3]; -static unsigned long save_eintflt[4]; -static unsigned long save_eintmask; - -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - save_eintmask = __raw_readl(S3C24XX_EINTMASK); - - return 0; -} - -int s3c24xx_irq_resume(struct sys_device *dev) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - __raw_writel(save_eintmask, S3C24XX_EINTMASK); - - return 0; -} - -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif - /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 21dfa74773d1..da0d3217d3e3 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -61,7 +61,7 @@ static __init int pm_simtec_init(void) __raw_writel(gstatus4, S3C2410_GSTATUS4); - return s3c2410_pm_init(); + return s3c_pm_init(); } arch_initcall(pm_simtec_init); diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 34ef18e5b2a1..062a29339a91 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -31,14 +31,9 @@ #include <linux/errno.h> #include <linux/time.h> #include <linux/interrupt.h> -#include <linux/crc32.h> -#include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/io.h> -#include <asm/cacheflush.h> -#include <mach/hardware.h> - #include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> @@ -49,10 +44,6 @@ #include <plat/pm.h> -/* for external use */ - -unsigned long s3c_pm_flags; - #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { @@ -120,328 +111,14 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; -#ifdef CONFIG_S3C2410_PM_DEBUG - -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C24XX_VA_UART0), - SAVE_UART(S3C24XX_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C24XX_VA_UART2), -#endif -}; - -/* debug - * - * we send the debug to printascii() to allow it to be seen if the - * system never wakes up from the sleep -*/ - -extern void printascii(const char *); - -void pm_dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -static void s3c2410_pm_debug_init(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) - -#define s3c2410_pm_debug_init() do { } while(0) - -static struct sleep_save uart_save[] = {}; -#endif - -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - DBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) -{ - crc_size = 0; - - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); - - DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); - - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} - -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; - } - - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c2410_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - ptr = phys_to_virt(addr); - - if (in_region(ptr, left, crcs, crc_size)) { - DBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } - - if (in_region(ptr, left, save_at, 32*4 )) { - DBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - DBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; - } - - return val; -} - -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } -} - -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - -/* helper functions to save and restore register state */ - -void s3c2410_pm_do_save(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - DBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} - -/* s3c2410_pm_do_restore - * - * restore the system from the given list of saved registers - * - * Note, we do not use DBG() in here, as the system may not have - * restore the UARTs state yet -*/ - -void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} - -/* s3c2410_pm_do_restore_core - * - * similar to s3c2410_pm_do_restore_core - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ - -static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - __raw_writel(ptr->val, ptr->reg); - } -} -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ - -static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) -{ - int i; - - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if ((which) & (1L<<i)) { - DBG("IRQ %d asserted at resume\n", start+i); - } - } -} - -/* s3c2410_pm_check_resume_pin +/* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and * make any necessary adjustments if it is not */ -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; @@ -456,21 +133,21 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) if (!irqstate) { if (pinstate == S3C2410_GPIO_IRQ) - DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); + S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); } else { if (pinstate == S3C2410_GPIO_IRQ) { - DBG("Disabling IRQ %d (pin %d)\n", irq, pin); + S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } -/* s3c2410_pm_configure_extint +/* s3c_pm_configure_extint * * configure all external interrupt pins */ -static void s3c2410_pm_configure_extint(void) +void s3c_pm_configure_extint(void) { int pin; @@ -480,11 +157,11 @@ static void s3c2410_pm_configure_extint(void) */ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0); } for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); } } @@ -494,12 +171,12 @@ static void s3c2410_pm_configure_extint(void) #define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) #define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) -/* s3c2410_pm_save_gpios() +/* s3c_pm_save_gpios() * * Save the state of the GPIOs */ -static void s3c2410_pm_save_gpios(void) +void s3c_pm_save_gpios(void) { struct gpio_sleep *gps = gpio_save; unsigned int gpio; @@ -538,7 +215,10 @@ static inline int is_out(unsigned long con) return con == 1; } -/* s3c2410_pm_restore_gpio() +/** + * s3c2410_pm_restore_gpio() - restore the given GPIO bank + * @index: The number of the GPIO bank being resumed. + * @gps: The sleep confgiuration for the bank. * * Restore one of the GPIO banks that was saved during suspend. This is * not as simple as once thought, due to the possibility of glitches @@ -646,8 +326,8 @@ static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) __raw_writel(gps->gpup, base + OFFS_UP); } - DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", - index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); + S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", + index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } @@ -656,7 +336,7 @@ static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) * Restore the state of the GPIOs */ -static void s3c2410_pm_restore_gpios(void) +void s3c_pm_restore_gpios(void) { struct gpio_sleep *gps = gpio_save; int gpio; @@ -666,150 +346,15 @@ static void s3c2410_pm_restore_gpios(void) } } -void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); - -#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) - -/* s3c2410_pm_enter - * - * central control for sleep/resume process -*/ - -static int s3c2410_pm_enter(suspend_state_t state) +void s3c_pm_restore_core(void) { - unsigned long regs_save[16]; - - /* ensure the debug is initialised (if enabled) */ - - s3c2410_pm_debug_init(); - - DBG("s3c2410_pm_enter(%d)\n", state); - - if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { - printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); - return -EINVAL; - } - - /* check if we have anything to wake-up with... bad things seem - * to happen if you suspend with no wakeup (system will often - * require a full power-cycle) - */ - - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && - !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { - printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); - printk(KERN_ERR PFX "Aborting sleep\n"); - return -EINVAL; - } - - /* prepare check area if configured */ - - s3c2410_pm_check_prepare(); - - /* store the physical address of the register recovery block */ - - s3c2410_sleep_save_phys = virt_to_phys(regs_save); - - DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - - /* save all necessary core registers not covered by the drivers */ - - s3c2410_pm_save_gpios(); - s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); - s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); - - /* set the irq configuration for wake */ - - s3c2410_pm_configure_extint(); - - DBG("sleep: irq wakeup masks: %08lx,%08lx\n", - s3c_irqwake_intmask, s3c_irqwake_eintmask); - - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - - /* call cpu specific preparation */ - - pm_cpu_prep(); - - /* flush cache back to ram */ - - flush_cache_all(); - - s3c2410_pm_check_store(); - - /* send the cpu to sleep... */ - - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - - /* s3c2410_cpu_save will also act as our return point from when - * we resume as it saves its own register state, so use the return - * code to differentiate return from save and return from sleep */ - - if (s3c2410_cpu_save(regs_save) == 0) { - flush_cache_all(); - pm_cpu_sleep(); - } - - /* restore the cpu state */ - - cpu_init(); - - /* restore the system state */ - - s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); - s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); - s3c2410_pm_restore_gpios(); - - s3c2410_pm_debug_init(); - - /* check what irq (if any) restored the system */ - - DBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); - - DBG("post sleep, preparing to return\n"); - - s3c2410_pm_check_restore(); - - /* ok, let's return from sleep */ - - DBG("S3C2410 PM Resume (post-restore)\n"); - return 0; + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } -static struct platform_suspend_ops s3c2410_pm_ops = { - .enter = s3c2410_pm_enter, - .valid = suspend_valid_only_mem, -}; - -/* s3c2410_pm_init - * - * Attach the power management functions. This should be called - * from the board specific initialisation if the board supports - * it. -*/ - -int __init s3c2410_pm_init(void) +void s3c_pm_save_core(void) { - printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); - - suspend_set_ops(&s3c2410_pm_ops); - return 0; + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } + diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index c1de6bb0101b..1364317d421e 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -145,13 +145,13 @@ static struct sleep_save s3c244x_sleep[] = { static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); return 0; } static int s3c244x_resume(struct sys_device *dev) { - s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); return 0; } diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 76594b212802..e73e3b6e88d2 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -41,25 +41,13 @@ .text - /* s3c2410_cpu_save - * - * save enough of the CPU state to allow us to re-start - * pm.c code. as we store items like the sp/lr, we will - * end up returning from this function when the cpu resumes - * so the return value is set to mark this. - * - * This arangement means we avoid having to flush the cache - * from this code. + /* s3c_cpu_save * * entry: - * r0 = pointer to save block - * - * exit: - * r0 = 0 => we stored everything - * 1 => resumed from sleep + * r0 = save address (virtual addr of s3c_sleep_save_phys) */ -ENTRY(s3c2410_cpu_save) +ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } @@ store co-processor registers @@ -71,20 +59,25 @@ ENTRY(s3c2410_cpu_save) stmia r0, { r4 - r13 } - mov r0, #0 - ldmfd sp, { r4 - r12, pc } + @@ write our state back to RAM + bl s3c_pm_cb_flushcache + @@ jump to final code to send system to sleep + ldr r0, =pm_cpu_sleep + @@ldr pc, [ r0 ] + ldr r0, [ r0 ] + mov pc, r0 + @@ return to the caller, after having the MMU @@ turned on, this restores the last bits from the @@ stack resume_with_mmu: - mov r0, #1 ldmfd sp!, { r4 - r12, pc } .ltorg @@ the next bits sit in the .data segment, even though they - @@ happen to be code... the s3c2410_sleep_save_phys needs to be + @@ happen to be code... the s3c_sleep_save_phys needs to be @@ accessed by the resume code before it can restore the MMU. @@ This means that the variable has to be close enough for the @@ code to read it... since the .text segment needs to be RO, @@ -92,19 +85,19 @@ resume_with_mmu: .data - .global s3c2410_sleep_save_phys -s3c2410_sleep_save_phys: + .global s3c_sleep_save_phys +s3c_sleep_save_phys: .word 0 /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the - * s3c2410_cpu_resume entry. + * s3c_cpu_resume entry. */ .word 0x2bedf00d - /* s3c2410_cpu_resume + /* s3c_cpu_resume * * resume code entry for bootloader to call * @@ -113,7 +106,7 @@ s3c2410_sleep_save_phys: * must not write to the code segment (code is read-only) */ -ENTRY(s3c2410_cpu_resume) +ENTRY(s3c_cpu_resume) mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE msr cpsr_c, r0 @@ -145,7 +138,7 @@ ENTRY(s3c2410_cpu_resume) mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches - ldr r0, s3c2410_sleep_save_phys @ address of restore block + ldr r0, s3c_sleep_save_phys @ address of restore block ldmia r0, { r4 - r13 } mcr p15, 0, r4, c13, c0, 0 @ PID |