diff options
Diffstat (limited to 'arch/sparc/include/asm/timer_32.h')
| -rw-r--r-- | arch/sparc/include/asm/timer_32.h | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h new file mode 100644 index 000000000000..361e53898dd7 --- /dev/null +++ b/arch/sparc/include/asm/timer_32.h @@ -0,0 +1,107 @@ +/* + * timer.h: Definitions for the timer chips on the Sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + + +#ifndef _SPARC_TIMER_H +#define _SPARC_TIMER_H + +#include <asm/system.h> /* For SUN4M_NCPUS */ +#include <asm/sun4paddr.h> +#include <asm/btfixup.h> + +/* Timer structures. The interrupt timer has two properties which + * are the counter (which is handled in do_timer in sched.c) and the limit. + * This limit is where the timer's counter 'wraps' around. Oddly enough, + * the sun4c timer when it hits the limit wraps back to 1 and not zero + * thus when calculating the value at which it will fire a microsecond you + * must adjust by one. Thanks SUN for designing such great hardware ;( + */ + +/* Note that I am only going to use the timer that interrupts at + * Sparc IRQ 10. There is another one available that can fire at + * IRQ 14. Currently it is left untouched, we keep the PROM's limit + * register value and let the prom take these interrupts. This allows + * L1-A to work. + */ + +struct sun4c_timer_info { + __volatile__ unsigned int cur_count10; + __volatile__ unsigned int timer_limit10; + __volatile__ unsigned int cur_count14; + __volatile__ unsigned int timer_limit14; +}; + +#define SUN4C_TIMER_PHYSADDR 0xf3000000 +#ifdef CONFIG_SUN4 +#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR +#else +#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR +#endif + +/* A sun4m has two blocks of registers which are probably of the same + * structure. LSI Logic's L64851 is told to _decrement_ from the limit + * value. Aurora behaves similarly but its limit value is compacted in + * other fashion (it's wider). Documented fields are defined here. + */ + +/* As with the interrupt register, we have two classes of timer registers + * which are per-cpu and master. Per-cpu timers only hit that cpu and are + * only level 14 ticks, master timer hits all cpus and is level 10. + */ + +#define SUN4M_PRM_CNT_L 0x80000000 +#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00 + +struct sun4m_timer_percpu_info { + __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */ + __volatile__ unsigned int l14_cur_count; + + /* This register appears to be write only and/or inaccessible + * on Uni-Processor sun4m machines. + */ + __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */ + + __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */ + __volatile__ unsigned char space[PAGE_SIZE - 16]; +}; + +struct sun4m_timer_regs { + struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS]; + volatile unsigned int l10_timer_limit; + volatile unsigned int l10_cur_count; + + /* Again, this appears to be write only and/or inaccessible + * on uni-processor sun4m machines. + */ + volatile unsigned int l10_limit_noclear; + + /* This register too, it must be magic. */ + volatile unsigned int foobar; + + volatile unsigned int cfg; /* equals zero at boot time... */ +}; + +#define SUN4D_PRM_CNT_L 0x80000000 +#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00 + +struct sun4d_timer_regs { + volatile unsigned int l10_timer_limit; + volatile unsigned int l10_cur_countx; + volatile unsigned int l10_limit_noclear; + volatile unsigned int ctrl; + volatile unsigned int l10_cur_count; +}; + +extern struct sun4d_timer_regs *sun4d_timers; + +extern __volatile__ unsigned int *master_l10_counter; +extern __volatile__ unsigned int *master_l10_limit; + +/* FIXME: Make do_[gs]ettimeofday btfixup calls */ +BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv) +#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv) + +#endif /* !(_SPARC_TIMER_H) */ |