diff options
Diffstat (limited to 'Documentation')
673 files changed, 23392 insertions, 8772 deletions
diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index 396de7bc735d..82abf92df429 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -104,6 +104,20 @@ Description: Dump the status of the QM. Four states: initiated, started, stopped and closed. Available for both PF and VF, and take no other effect on HPRE. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs +Date: Mar 2022 +Contact: linux-crypto@vger.kernel.org +Description: QM debug registers(regs) read hardware register value. This + node is used to show the change of the qm register values. This + node can be help users to check the change of register values. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs +Date: Mar 2022 +Contact: linux-crypto@vger.kernel.org +Description: HPRE debug registers(regs) read hardware register value. This + node is used to show the change of the register values. This + node can be help users to check the change of register values. + What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt Date: Apr 2020 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index 2bf84ced484b..93c530d1bf0f 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -84,6 +84,20 @@ Description: Dump the status of the QM. Four states: initiated, started, stopped and closed. Available for both PF and VF, and take no other effect on SEC. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/diff_regs +Date: Mar 2022 +Contact: linux-crypto@vger.kernel.org +Description: QM debug registers(regs) read hardware register value. This + node is used to show the change of the qm register values. This + node can be help users to check the change of register values. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs +Date: Mar 2022 +Contact: linux-crypto@vger.kernel.org +Description: SEC debug registers(regs) read hardware register value. This + node is used to show the change of the register values. This + node can be help users to check the change of register values. + What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt Date: Apr 2020 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index bf1258bc6495..fd3f314cf8d1 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -97,6 +97,20 @@ Description: Dump the status of the QM. Four states: initiated, started, stopped and closed. Available for both PF and VF, and take no other effect on ZIP. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/diff_regs +Date: Mar 2022 +Contact: linux-crypto@vger.kernel.org +Description: QM debug registers(regs) read hardware register value. This + node is used to show the change of the qm registers value. This + node can be help users to check the change of register values. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs +Date: Mar 2022 +Contact: linux-crypto@vger.kernel.org +Description: ZIP debug registers(regs) read hardware register value. This + node is used to show the change of the registers value. this + node can be help users to check the change of register values. + What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt Date: Apr 2020 Contact: linux-crypto@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index 3c77677e0ca7..594fda254130 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -103,8 +103,8 @@ What: /sys/class/cxl/<afu>/api_version_compatible Date: September 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: read only - Decimal value of the the lowest version of the userspace API - this this kernel supports. + Decimal value of the lowest version of the userspace API + this kernel supports. Users: https://github.com/ibm-capi/libcxl diff --git a/Documentation/ABI/testing/sysfs-driver-ccp b/Documentation/ABI/testing/sysfs-driver-ccp new file mode 100644 index 000000000000..7aded9b75553 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ccp @@ -0,0 +1,87 @@ +What: /sys/bus/pci/devices/<BDF>/fused_part +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/fused_part file reports + whether the CPU or APU has been fused to prevent tampering. + 0: Not fused + 1: Fused + +What: /sys/bus/pci/devices/<BDF>/debug_lock_on +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/debug_lock_on reports + whether the AMD CPU or APU has been unlocked for debugging. + Possible values: + 0: Not locked + 1: Locked + +What: /sys/bus/pci/devices/<BDF>/tsme_status +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/tsme_status file reports + the status of transparent secure memory encryption on AMD systems. + Possible values: + 0: Not active + 1: Active + +What: /sys/bus/pci/devices/<BDF>/anti_rollback_status +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/anti_rollback_status file reports + whether the PSP is enforcing rollback protection. + Possible values: + 0: Not enforcing + 1: Enforcing + +What: /sys/bus/pci/devices/<BDF>/rpmc_production_enabled +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/rpmc_production_enabled file reports + whether Replay Protected Monotonic Counter support has been enabled. + Possible values: + 0: Not enabled + 1: Enabled + +What: /sys/bus/pci/devices/<BDF>/rpmc_spirom_available +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/rpmc_spirom_available file reports + whether an Replay Protected Monotonic Counter supported SPI is installed + on the system. + Possible values: + 0: Not present + 1: Present + +What: /sys/bus/pci/devices/<BDF>/hsp_tpm_available +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/hsp_tpm_available file reports + whether the HSP TPM has been activated. + Possible values: + 0: Not activated or present + 1: Activated + +What: /sys/bus/pci/devices/<BDF>/rom_armor_enforced +Date: June 2022 +KernelVersion: 5.19 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/rom_armor_enforced file reports + whether RomArmor SPI protection is enforced. + Possible values: + 0: Not enforced + 1: Enforced diff --git a/Documentation/ABI/testing/sysfs-driver-chromeos-acpi b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi new file mode 100644 index 000000000000..c308926e1568 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi @@ -0,0 +1,137 @@ +What: /sys/bus/platform/devices/GGL0001:*/BINF.2 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns active EC firmware of current boot (boolean). + + == =============================== + 0 Read only (recovery) firmware. + 1 Rewritable firmware. + == =============================== + +What: /sys/bus/platform/devices/GGL0001:*/BINF.3 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns main firmware type for current boot (integer). + + == ===================================== + 0 Recovery. + 1 Normal. + 2 Developer. + 3 Netboot (factory installation only). + == ===================================== + +What: /sys/bus/platform/devices/GGL0001:*/CHSW +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns switch position for Chrome OS specific hardware + switches when the firmware is booted (integer). + + ==== =========================================== + 0 No changes. + 2 Recovery button was pressed. + 4 Recovery button was pressed (EC firmware). + 32 Developer switch was enabled. + 512 Firmware write protection was disabled. + ==== =========================================== + +What: /sys/bus/platform/devices/GGL0001:*/FMAP +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns physical memory address of the start of the main + processor firmware flashmap. + +What: /sys/bus/platform/devices/GGL0001:*/FRID +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns firmware version for the read-only portion of the + main processor firmware. + +What: /sys/bus/platform/devices/GGL0001:*/FWID +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns firmware version for the rewritable portion of the + main processor firmware. + +What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.0 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns type of the GPIO signal for the Chrome OS specific + GPIO assignments (integer). + + =========== ================================== + 1 Recovery button. + 2 Developer mode switch. + 3 Firmware write protection switch. + 256 to 511 Debug header GPIO 0 to GPIO 255. + =========== ================================== + +What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.1 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns signal attributes of the GPIO signal (integer bitfield). + + == ======================= + 0 Signal is active low. + 1 Signal is active high. + == ======================= + +What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.2 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns the GPIO number on the specified GPIO + controller. + +What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.3 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns name of the GPIO controller. + +What: /sys/bus/platform/devices/GGL0001:*/HWID +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns hardware ID for the Chromebook. + +What: /sys/bus/platform/devices/GGL0001:*/MECK +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns the SHA-1 or SHA-256 hash that is read out of the + Management Engine extended registers during boot. The hash + is exported via ACPI so the OS can verify that the Management + Engine firmware has not changed. If Management Engine is not + present, or if the firmware was unable to read the extended registers, this buffer size can be zero. + +What: /sys/bus/platform/devices/GGL0001:*/VBNV.0 +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns offset in CMOS bank 0 of the verified boot non-volatile + storage block, counting from the first writable CMOS byte + (that is, 'offset = 0' is the byte following the 14 bytes of + clock data). + +What: /sys/bus/platform/devices/GGL0001:*/VBNV.1 +Date: May 2022 +KernelVersion: 5.19 +Description: + Return the size in bytes of the verified boot non-volatile + storage block. + +What: /sys/bus/platform/devices/GGL0001:*/VDAT +Date: May 2022 +KernelVersion: 5.19 +Description: + Returns the verified boot data block shared between the + firmware verification step and the kernel verification step + (binary). diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index a44ef8bfbadf..6b248abb1bd7 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -1518,7 +1518,7 @@ Description: This entry shows the number of reads that cannot be changed to The file is read only. -What: /sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt +What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_noti_cnt Date: June 2021 Contact: Daejun Park <daejun7.park@samsung.com> Description: This entry shows the number of response UPIUs that has @@ -1526,19 +1526,23 @@ Description: This entry shows the number of response UPIUs that has The file is read only. -What: /sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt +What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_active_cnt Date: June 2021 Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of active sub-regions recommended by - response UPIUs. +Description: For the HPB device control mode, this entry shows the number of + active sub-regions recommended by response UPIUs. For the HPB host control + mode, this entry shows the number of active sub-regions recommended by the + HPB host control mode heuristic algorithm. The file is read only. -What: /sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt +What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_inactive_cnt Date: June 2021 Contact: Daejun Park <daejun7.park@samsung.com> -Description: This entry shows the number of inactive regions recommended by - response UPIUs. +Description: For the HPB device control mode, this entry shows the number of + inactive regions recommended by response UPIUs. For the HPB host control + mode, this entry shows the number of inactive regions recommended by the + HPB host control mode heuristic algorithm. The file is read only. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index 9e282065cbcf..08b9df323560 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -23,9 +23,10 @@ Date: Mar 2022 Contact: SeongJae Park <sj@kernel.org> Description: Writing 'on' or 'off' to this file makes the kdamond starts or stops, respectively. Reading the file returns the keywords - based on the current status. Writing 'update_schemes_stats' to - the file updates contents of schemes stats files of the - kdamond. + based on the current status. Writing 'commit' to this file + makes the kdamond reads the user inputs in the sysfs files + except 'state' again. Writing 'update_schemes_stats' to the + file updates contents of schemes stats files of the kdamond. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/pid Date: Mar 2022 @@ -40,14 +41,24 @@ Description: Writing a number 'N' to this file creates the number of directories for controlling each DAMON context named '0' to 'N-1' under the contexts/ directory. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/avail_operations +Date: Apr 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the available monitoring operations + sets on the currently running kernel. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/operations Date: Mar 2022 Contact: SeongJae Park <sj@kernel.org> Description: Writing a keyword for a monitoring operations set ('vaddr' for - virtual address spaces monitoring, and 'paddr' for the physical - address space monitoring) to this file makes the context to use - the operations set. Reading the file returns the keyword for - the operations set the context is set to use. + virtual address spaces monitoring, 'fvaddr' for fixed virtual + address ranges monitoring, and 'paddr' for the physical address + space monitoring) to this file makes the context to use the + operations set. Reading the file returns the keyword for the + operations set the context is set to use. + + Note that only the operations sets that listed in + 'avail_operations' file are valid inputs. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/sample_us Date: Mar 2022 diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst index 67a850b55617..cced568d78e9 100644 --- a/Documentation/PCI/pci.rst +++ b/Documentation/PCI/pci.rst @@ -273,12 +273,12 @@ Set the DMA mask size While all drivers should explicitly indicate the DMA capability (e.g. 32 or 64 bit) of the PCI bus master, devices with more than 32-bit bus master capability for streaming data need the driver -to "register" this capability by calling pci_set_dma_mask() with +to "register" this capability by calling dma_set_mask() with appropriate parameters. In general this allows more efficient DMA on systems where System RAM exists above 4G _physical_ address. Drivers for all PCI-X and PCIe compliant devices must call -set_dma_mask() as they are 64-bit DMA devices. +dma_set_mask() as they are 64-bit DMA devices. Similarly, drivers must also "register" this capability if the device can directly address "coherent memory" in System RAM above 4G physical diff --git a/Documentation/admin-guide/blockdev/zram.rst b/Documentation/admin-guide/blockdev/zram.rst index 54fe63745ed8..c73b16930449 100644 --- a/Documentation/admin-guide/blockdev/zram.rst +++ b/Documentation/admin-guide/blockdev/zram.rst @@ -343,6 +343,11 @@ Admin can request writeback of those idle pages at right timing via:: With the command, zram will writeback idle pages from memory to the storage. +Additionally, if a user choose to writeback only huge and idle pages +this can be accomplished with:: + + echo huge_idle > /sys/block/zramX/writeback + If an admin wants to write a specific page in zram device to the backing device, they could write a page index into the interface. diff --git a/Documentation/admin-guide/bootconfig.rst b/Documentation/admin-guide/bootconfig.rst index a1860fc0ca88..d99994345d41 100644 --- a/Documentation/admin-guide/bootconfig.rst +++ b/Documentation/admin-guide/bootconfig.rst @@ -158,9 +158,15 @@ Each key-value pair is shown in each line with following style:: Boot Kernel With a Boot Config ============================== -Since the boot configuration file is loaded with initrd, it will be added -to the end of the initrd (initramfs) image file with padding, size, -checksum and 12-byte magic word as below. +There are two options to boot the kernel with bootconfig: attaching the +bootconfig to the initrd image or embedding it in the kernel itself. + +Attaching a Boot Config to Initrd +--------------------------------- + +Since the boot configuration file is loaded with initrd by default, +it will be added to the end of the initrd (initramfs) image file with +padding, size, checksum and 12-byte magic word as below. [initrd][bootconfig][padding][size(le32)][checksum(le32)][#BOOTCONFIG\n] @@ -196,6 +202,25 @@ To remove the config from the image, you can use -d option as below:: Then add "bootconfig" on the normal kernel command line to tell the kernel to look for the bootconfig at the end of the initrd file. +Embedding a Boot Config into Kernel +----------------------------------- + +If you can not use initrd, you can also embed the bootconfig file in the +kernel by Kconfig options. In this case, you need to recompile the kernel +with the following configs:: + + CONFIG_BOOT_CONFIG_EMBED=y + CONFIG_BOOT_CONFIG_EMBED_FILE="/PATH/TO/BOOTCONFIG/FILE" + +``CONFIG_BOOT_CONFIG_EMBED_FILE`` requires an absolute path or a relative +path to the bootconfig file from source tree or object tree. +The kernel will embed it as the default bootconfig. + +Just as when attaching the bootconfig to the initrd, you need ``bootconfig`` +option on the kernel command line to enable the embedded bootconfig. + +Note that even if you set this option, you can override the embedded +bootconfig by another bootconfig which attached to the initrd. Kernel parameters via Boot Config ================================= diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 69d7a6983f78..176298f2f4de 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1208,6 +1208,34 @@ PAGE_SIZE multiple when read back. high limit is used and monitored properly, this limit's utility is limited to providing the final safety net. + memory.reclaim + A write-only nested-keyed file which exists for all cgroups. + + This is a simple interface to trigger memory reclaim in the + target cgroup. + + This file accepts a single key, the number of bytes to reclaim. + No nested keys are currently supported. + + Example:: + + echo "1G" > memory.reclaim + + The interface can be later extended with nested keys to + configure the reclaim behavior. For example, specify the + type of memory to reclaim from (anon, file, ..). + + Please note that the kernel can over or under reclaim from + the target cgroup. If less bytes are reclaimed than the + specified amount, -EAGAIN is returned. + + memory.peak + A read-only single value file which exists on non-root + cgroups. + + The max memory usage recorded for the cgroup and its + descendants since the creation of the cgroup. + memory.oom.group A read-write single value file which exists on non-root cgroups. The default value is "0". @@ -1326,6 +1354,12 @@ PAGE_SIZE multiple when read back. Amount of cached filesystem data that is swap-backed, such as tmpfs, shm segments, shared anonymous mmap()s + zswap + Amount of memory consumed by the zswap compression backend. + + zswapped + Amount of application memory swapped out to zswap. + file_mapped Amount of cached filesystem data mapped with mmap() @@ -1516,6 +1550,21 @@ PAGE_SIZE multiple when read back. higher than the limit for an extended period of time. This reduces the impact on the workload and memory management. + memory.zswap.current + A read-only single value file which exists on non-root + cgroups. + + The total amount of memory consumed by the zswap compression + backend. + + memory.zswap.max + A read-write single value file which exists on non-root + cgroups. The default is "max". + + Zswap usage hard limit. If a cgroup's zswap pool reaches this + limit, it will refuse to take any more stores before existing + entries fault back in or are written out to disk. + memory.pressure A read-only nested-keyed file. @@ -1881,7 +1930,7 @@ IO Latency Interface Files io.latency This takes a similar format as the other controllers. - "MAJOR:MINOR target=<target time in microseconds" + "MAJOR:MINOR target=<target time in microseconds>" io.stat If the controller is enabled you will see extra stats in io.stat in diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index c07dc0ee860e..9764d6edb189 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -1933,7 +1933,7 @@ ... 255= /dev/umem/d15p15 15th partition of 16th board. - 117 char COSA/SRP synchronous serial card + 117 char [REMOVED] COSA/SRP synchronous serial card 0 = /dev/cosa0c0 1st board, 1st channel 1 = /dev/cosa0c1 1st board, 2nd channel ... diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index 01ba293a2d70..959f73a32712 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -99,6 +99,7 @@ parameter is applicable:: ALSA ALSA sound support is enabled. APIC APIC support is enabled. APM Advanced Power Management support is enabled. + APPARMOR AppArmor support is enabled. ARM ARM architecture is enabled. ARM64 ARM64 architecture is enabled. AX25 Appropriate AX.25 support is enabled. @@ -108,15 +109,15 @@ parameter is applicable:: DYNAMIC_DEBUG Build in debug messages and enable them at runtime EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled - EIDE EIDE/ATAPI support is enabled. EVM Extended Verification Module FB The frame buffer device is enabled. FTRACE Function tracing enabled. GCOV GCOV profiling is enabled. + HIBERNATION HIBERNATION is enabled. HW Appropriate hardware is enabled. + HYPER_V HYPERV support is enabled. IA-64 IA-64 architecture is enabled. IMA Integrity measurement architecture is enabled. - IOSCHED More than one I/O scheduler is enabled. IP_PNP IP DHCP, BOOTP, or RARP is enabled. IPV6 IPv6 support is enabled. ISAPNP ISA PnP code is enabled. @@ -140,7 +141,6 @@ parameter is applicable:: NUMA NUMA support is enabled. NFS Appropriate NFS support is enabled. OF Devicetree is enabled. - OSS OSS sound support is enabled. PV_OPS A paravirtualized kernel is enabled. PARIDE The ParIDE (parallel port IDE) subsystem is enabled. PARISC The PA-RISC architecture is enabled. @@ -160,7 +160,6 @@ parameter is applicable:: the Documentation/scsi/ sub-directory. SECURITY Different security models are enabled. SELINUX SELinux support is enabled. - APPARMOR AppArmor support is enabled. SERIAL Serial support is enabled. SH SuperH architecture is enabled. SMP The kernel is an SMP kernel. @@ -168,7 +167,6 @@ parameter is applicable:: SWSUSP Software suspend (hibernation) is enabled. SUSPEND System suspend states are enabled. TPM TPM drivers are enabled. - TS Appropriate touchscreen support is enabled. UMS USB Mass Storage support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. @@ -177,7 +175,6 @@ parameter is applicable:: VGA The VGA console has been enabled. VT Virtual terminal support is enabled. WDT Watchdog support is enabled. - XT IBM PC/XT MFM hard disk support is enabled. X86-32 X86-32, aka i386 architecture is enabled. X86-64 X86-64 architecture is enabled. More X86-64 boot options can be found in @@ -211,7 +208,7 @@ The number of kernel parameters is not limited, but the length of the complete command line (parameters including spaces etc.) is limited to a fixed number of characters. This limit depends on the architecture and is between 256 and 4096 characters. It is defined in the file -./include/asm/setup.h as COMMAND_LINE_SIZE. +./include/uapi/asm-generic/setup.h as COMMAND_LINE_SIZE. Finally, the [KMG] suffix is commonly described after a number of kernel parameter values. These 'K', 'M', and 'G' letters represent the _binary_ diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2d67cdfbf9c9..710b52d87bdd 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -461,6 +461,12 @@ Format: <io>,<irq>,<mode> See header of drivers/net/hamradio/baycom_ser_hdx.c. + bert_disable [ACPI] + Disable BERT OS support on buggy BIOSes. + + bgrt_disable [ACPI][X86] + Disable BGRT to avoid flickering OEM logo. + blkdevparts= Manual partition parsing of block device(s) for embedded devices based on command line input. See Documentation/block/cmdline-partition.rst @@ -476,12 +482,6 @@ See Documentation/admin-guide/bootconfig.rst - bert_disable [ACPI] - Disable BERT OS support on buggy BIOSes. - - bgrt_disable [ACPI][X86] - Disable BGRT to avoid flickering OEM logo. - bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) bttv.radio= Most important insmod options are available as kernel args too. @@ -563,6 +563,25 @@ cio_ignore= [S390] See Documentation/s390/common_io.rst for details. + + clearcpuid=X[,X...] [X86] + Disable CPUID feature X for the kernel. See + arch/x86/include/asm/cpufeatures.h for the valid bit + numbers X. Note the Linux-specific bits are not necessarily + stable over kernel options, but the vendor-specific + ones should be. + X can also be a string as appearing in the flags: line + in /proc/cpuinfo which does not have the above + instability issue. However, not all features have names + in /proc/cpuinfo. + Note that using this option will taint your kernel. + Also note that user programs calling CPUID directly + or using the feature without checking anything + will still see it. This just prevents it from + being used by the kernel or shown in /proc/cpuinfo. + Also note the kernel might malfunction if you disable + some critical bits. + clk_ignore_unused [CLK] Prevents the clock framework from automatically gating @@ -631,24 +650,6 @@ Defaults to zero when built as a module and to 10 seconds when built into the kernel. - clearcpuid=X[,X...] [X86] - Disable CPUID feature X for the kernel. See - arch/x86/include/asm/cpufeatures.h for the valid bit - numbers X. Note the Linux-specific bits are not necessarily - stable over kernel options, but the vendor-specific - ones should be. - X can also be a string as appearing in the flags: line - in /proc/cpuinfo which does not have the above - instability issue. However, not all features have names - in /proc/cpuinfo. - Note that using this option will taint your kernel. - Also note that user programs calling CPUID directly - or using the feature without checking anything - will still see it. This just prevents it from - being used by the kernel or shown in /proc/cpuinfo. - Also note the kernel might malfunction if you disable - some critical bits. - cma=nn[MG]@[start[MG][-end[MG]]] [KNL,CMA] Sets the size of kernel global memory area for @@ -770,6 +771,24 @@ 0: default value, disable debugging 1: enable debugging at boot time + cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver + Format: + <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] + + cpu0_hotplug [X86] Turn on CPU0 hotplug feature when + CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off. + Some features depend on CPU0. Known dependencies are: + 1. Resume from suspend/hibernate depends on CPU0. + Suspend/hibernate will fail if CPU0 is offline and you + need to online CPU0 before suspend/hibernate. + 2. PIC interrupts also depend on CPU0. CPU0 can't be + removed if a PIC interrupt is detected. + It's said poweroff/reboot may depend on CPU0 on some + machines although I haven't seen such issues so far + after CPU0 is offline on a few tested machines. + If the dependencies are under your control, you can + turn on cpu0_hotplug. + cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system @@ -790,9 +809,13 @@ on every CPU online, such as boot, and resume from suspend. Default: 10000 - cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver - Format: - <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] + crash_kexec_post_notifiers + Run kdump after running panic-notifiers and dumping + kmsg. This only for the users who doubt kdump always + succeeds in any situation. + Note that this also increases risks of kdump failure, + because some panic notifiers can make the crashed + kernel more unstable. crashkernel=size[KMG][@offset[KMG]] [KNL] Using kexec, Linux can switch to a 'crash kernel' @@ -961,6 +984,8 @@ dump out devices still on the deferred probe list after retrying. + delayacct [KNL] Enable per-task delay accounting + dell_smm_hwmon.ignore_dmi= [HW] Continue probing hardware even if DMI data indicates that the driver is running on unsupported @@ -1014,17 +1039,6 @@ disable= [IPV6] See Documentation/networking/ipv6.rst. - hardened_usercopy= - [KNL] Under CONFIG_HARDENED_USERCOPY, whether - hardening is enabled for this boot. Hardened - usercopy checking is used to protect the kernel - from reading or writing beyond known memory - allocation boundaries as a proactive defense - against bounds-checking flaws in the kernel's - copy_to_user()/copy_from_user() interface. - on Perform hardened usercopy checks (default). - off Disable hardened usercopy checks. - disable_radix [PPC] Disable RADIX MMU mode on POWER9 @@ -1293,7 +1307,7 @@ Append ",keep" to not disable it when the real console takes over. - Only one of vga, efi, serial, or usb debug port can + Only one of vga, serial, or usb debug port can be used at a time. Currently only ttyS0 and ttyS1 may be specified by @@ -1308,7 +1322,7 @@ Interaction with the standard serial driver is not very good. - The VGA and EFI output is eventually overwritten by + The VGA output is eventually overwritten by the real console. The xen option can only be used in Xen domains. @@ -1327,17 +1341,6 @@ force: enforce the use of EDAC to report H/W event. default: on. - ekgdboc= [X86,KGDB] Allow early kernel console debugging - ekgdboc=kbd - - This is designed to be used in conjunction with - the boot argument: earlyprintk=vga - - This parameter works in place of the kgdboc parameter - but can only be used if the backing tty is available - very early in the boot process. For early debugging - via a serial port see kgdboc_earlycon instead. - edd= [EDD] Format: {"off" | "on" | "skip[mbr]"} @@ -1399,6 +1402,17 @@ eisa_irq_edge= [PARISC,HW] See header of drivers/parisc/eisa.c. + ekgdboc= [X86,KGDB] Allow early kernel console debugging + Format: ekgdboc=kbd + + This is designed to be used in conjunction with + the boot argument: earlyprintk=vga + + This parameter works in place of the kgdboc parameter + but can only be used if the backing tty is available + very early in the boot process. For early debugging + via a serial port see kgdboc_earlycon instead. + elanfreq= [X86-32] See comment before function elanfreq_setup() in arch/x86/kernel/cpu/cpufreq/elanfreq.c. @@ -1597,6 +1611,17 @@ Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0. Default: 1024 + hardened_usercopy= + [KNL] Under CONFIG_HARDENED_USERCOPY, whether + hardening is enabled for this boot. Hardened + usercopy checking is used to protect the kernel + from reading or writing beyond known memory + allocation boundaries as a proactive defense + against bounds-checking flaws in the kernel's + copy_to_user()/copy_from_user() interface. + on Perform hardened usercopy checks (default). + off Disable hardened usercopy checks. + hardlockup_all_cpu_backtrace= [KNL] Should the hard-lockup detector generate backtraces on all cpus. @@ -1617,6 +1642,15 @@ corresponding firmware-first mode error processing logic will be disabled. + hibernate= [HIBERNATION] + noresume Don't check if there's a hibernation image + present during boot. + nocompress Don't compress/decompress hibernation images. + no Disable hibernation and resume. + protect_image Turn on image protection during restoration + (that will set all pages holding image data + during restoration read-only). + highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -1639,16 +1673,6 @@ hpet_mmap= [X86, HPET_MMAP] Allow userspace to mmap HPET registers. Default set by CONFIG_HPET_MMAP_DEFAULT. - hugetlb_cma= [HW,CMA] The size of a CMA area used for allocation - of gigantic hugepages. Or using node format, the size - of a CMA area per node can be specified. - Format: nn[KMGTPE] or (node format) - <node>:nn[KMGTPE][,<node>:nn[KMGTPE]] - - Reserve a CMA area of given size and allocate gigantic - hugepages using the CMA allocator. If enabled, the - boot-time allocation of gigantic hugepages is skipped. - hugepages= [HW] Number of HugeTLB pages to allocate at boot. If this follows hugepagesz (below), it specifies the number of pages of hugepagesz to be allocated. @@ -1670,17 +1694,27 @@ Documentation/admin-guide/mm/hugetlbpage.rst. Format: size[KMG] + hugetlb_cma= [HW,CMA] The size of a CMA area used for allocation + of gigantic hugepages. Or using node format, the size + of a CMA area per node can be specified. + Format: nn[KMGTPE] or (node format) + <node>:nn[KMGTPE][,<node>:nn[KMGTPE]] + + Reserve a CMA area of given size and allocate gigantic + hugepages using the CMA allocator. If enabled, the + boot-time allocation of gigantic hugepages is skipped. + hugetlb_free_vmemmap= - [KNL] Reguires CONFIG_HUGETLB_PAGE_FREE_VMEMMAP + [KNL] Reguires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP enabled. Allows heavy hugetlb users to free up some more memory (7 * PAGE_SIZE for each 2MB hugetlb page). - Format: { on | off (default) } + Format: { [oO][Nn]/Y/y/1 | [oO][Ff]/N/n/0 (default) } - on: enable the feature - off: disable the feature + [oO][Nn]/Y/y/1: enable the feature + [oO][Ff]/N/n/0: disable the feature - Built with CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON=y, + Built with CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON=y, the default is on. This is not compatible with memory_hotplug.memmap_on_memory. @@ -1769,26 +1803,6 @@ icn= [HW,ISDN] Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]] - ide-core.nodma= [HW] (E)IDE subsystem - Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc - .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr - .cdrom .chs .ignore_cable are additional options - See Documentation/ide/ide.rst. - - ide-generic.probe-mask= [HW] (E)IDE subsystem - Format: <int> - Probe mask for legacy ISA IDE ports. Depending on - platform up to 6 ports are supported, enabled by - setting corresponding bits in the mask to 1. The - default value is 0x0, which has a special meaning. - On systems that have PCI, it triggers scanning the - PCI bus for the first and the second port, which - are then probed. On systems without PCI the value - of 0x0 enables probing the two first ports as if it - was 0x3. - - ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem - Claim all unknown PCI IDE storage controllers. idle= [X86] Format: idle=poll, idle=halt, idle=nomwait @@ -2722,8 +2736,6 @@ If there are multiple matching configurations changing the same attribute, the last one is used. - memblock=debug [KNL] Enable memblock debug messages. - load_ramdisk= [RAM] [Deprecated] lockd.nlm_grace_period=P [NFS] Assign grace period. @@ -2865,7 +2877,7 @@ different yeeloong laptops. Example: machtype=lemote-yeeloong-2f-7inch - max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater + max_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory greater than or equal to this physical address is ignored. maxcpus= [SMP] Maximum number of processors that an SMP kernel @@ -2965,6 +2977,8 @@ mem=nopentium [BUGS=X86-32] Disable usage of 4MB pages for kernel memory. + memblock=debug [KNL] Enable memblock debug messages. + memchunk=nn[KMG] [KNL,SH] Allow user to override the default size for per-device physically contiguous DMA buffers. @@ -3108,7 +3122,7 @@ mga= [HW,DRM] - min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this + min_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory below this physical address is ignored. mini2440= [ARM,HW,KNL] @@ -3233,20 +3247,6 @@ mtdparts= [MTD] See drivers/mtd/parsers/cmdlinepart.c - multitce=off [PPC] This parameter disables the use of the pSeries - firmware feature for updating multiple TCE entries - at a time. - - onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration - - Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock] - - boundary - index of last SLC block on Flex-OneNAND. - The remaining blocks are configured as MLC blocks. - lock - Configure if Flex-OneNAND boundary should be locked. - Once locked, the boundary cannot be changed. - 1 indicates lock status, 0 indicates unlock status. - mtdset= [ARM] ARM/S3C2412 JIVE boot control @@ -3273,6 +3273,10 @@ Used for mtrr cleanup. It is spare mtrr entries number. Set to 2 or more if your graphical card needs more. + multitce=off [PPC] This parameter disables the use of the pSeries + firmware feature for updating multiple TCE entries + at a time. + n2= [NET] SDL Inc. RISCom/N2 synchronous serial card netdev= [NET] Network devices parameters @@ -3282,6 +3286,11 @@ This usage is only documented in each driver source file if at all. + netpoll.carrier_timeout= + [NET] Specifies amount of time (in seconds) that + netpoll should wait for a carrier. By default netpoll + waits 4 seconds. + nf_conntrack.acct= [NETFILTER] Enable connection tracking flow accounting 0 to disable accounting @@ -3432,11 +3441,6 @@ These settings can be accessed at runtime via the nmi_watchdog and hardlockup_panic sysctls. - netpoll.carrier_timeout= - [NET] Specifies amount of time (in seconds) that - netpoll should wait for a carrier. By default netpoll - waits 4 seconds. - no387 [BUGS=X86-32] Tells the kernel to use the 387 maths emulation library even if a 387 maths coprocessor is present. @@ -3491,8 +3495,6 @@ nocache [ARM] - delayacct [KNL] Enable per-task delay accounting - nodsp [SH] Disable hardware DSP at boot time. noefi Disable EFI runtime services support. @@ -3721,20 +3723,6 @@ nox2apic [X86-64,APIC] Do not enable x2APIC mode. - cpu0_hotplug [X86] Turn on CPU0 hotplug feature when - CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off. - Some features depend on CPU0. Known dependencies are: - 1. Resume from suspend/hibernate depends on CPU0. - Suspend/hibernate will fail if CPU0 is offline and you - need to online CPU0 before suspend/hibernate. - 2. PIC interrupts also depend on CPU0. CPU0 can't be - removed if a PIC interrupt is detected. - It's said poweroff/reboot may depend on CPU0 on some - machines although I haven't seen such issues so far - after CPU0 is offline on a few tested machines. - If the dependencies are under your control, you can - turn on cpu0_hotplug. - nps_mtm_hs_ctr= [KNL,ARC] This parameter sets the maximum duration, in cycles, each HW thread of the CTOP can run @@ -3787,6 +3775,16 @@ For example, to override I2C bus2: omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100 + onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration + + Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock] + + boundary - index of last SLC block on Flex-OneNAND. + The remaining blocks are configured as MLC blocks. + lock - Configure if Flex-OneNAND boundary should be locked. + Once locked, the boundary cannot be changed. + 1 indicates lock status, 0 indicates unlock status. + oops=panic Always panic on oopses. Default is to just kill the process, but there is a small probability of deadlocking the machine. @@ -3857,14 +3855,6 @@ panic_on_warn panic() instead of WARN(). Useful to cause kdump on a WARN(). - crash_kexec_post_notifiers - Run kdump after running panic-notifiers and dumping - kmsg. This only for the users who doubt kdump always - succeeds in any situation. - Note that this also increases risks of kdump failure, - because some panic notifiers can make the crashed - kernel more unstable. - parkbd.port= [HW] Parallel port number the keyboard adapter is connected to, default is 0. Format: <parport#> @@ -4109,6 +4099,15 @@ please report a bug. nocrs [X86] Ignore PCI host bridge windows from ACPI. If you need to use this, please report a bug. + use_e820 [X86] Use E820 reservations to exclude parts of + PCI host bridge windows. This is a workaround + for BIOS defects in host bridge _CRS methods. + If you need to use this, please report a bug to + <linux-pci@vger.kernel.org>. + no_e820 [X86] Ignore E820 reservations for PCI host + bridge windows. This is the default on modern + hardware. If you need to use this, please report + a bug to <linux-pci@vger.kernel.org>. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), so this option is a temporary workaround @@ -5156,15 +5155,6 @@ Useful for devices that are detected asynchronously (e.g. USB and MMC devices). - hibernate= [HIBERNATION] - noresume Don't check if there's a hibernation image - present during boot. - nocompress Don't compress/decompress hibernation images. - no Disable hibernation and resume. - protect_image Turn on image protection during restoration - (that will set all pages holding image data - during restoration read-only). - retain_initrd [RAM] Keep initrd memory after extraction rfkill.default_state= @@ -5480,7 +5470,7 @@ 1: Fast pin select (default) 2: ATC IRMode - smt [KNL,S390] Set the maximum number of threads (logical + smt= [KNL,S390] Set the maximum number of threads (logical CPUs) to use per physical CPU on systems capable of symmetric multithreading (SMT). Will be capped to the actual hardware limit. @@ -5867,8 +5857,9 @@ This parameter controls use of the Protected Execution Facility on pSeries. - swapaccount=[0|1] - [KNL] Enable accounting of swap in memory resource + swapaccount= [KNL] + Format: [0|1] + Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst) @@ -5914,7 +5905,8 @@ tdfx= [HW,DRM] - test_suspend= [SUSPEND][,N] + test_suspend= [SUSPEND] + Format: { "mem" | "standby" | "freeze" }[,N] Specify "mem" (for Suspend-to-RAM) or "standby" (for standby suspend) or "freeze" (for suspend type freeze) as the system sleep state during system startup with @@ -5998,32 +5990,7 @@ This will guarantee that all the other pcrs are saved. - trace_buf_size=nn[KMG] - [FTRACE] will set tracing buffer size on each cpu. - - trace_event=[event-list] - [FTRACE] Set and start specified trace events in order - to facilitate early boot debugging. The event-list is a - comma-separated list of trace events to enable. See - also Documentation/trace/events.rst - - trace_options=[option-list] - [FTRACE] Enable or disable tracer options at boot. - The option-list is a comma delimited list of options - that can be enabled or disabled just as if you were - to echo the option name into - - /sys/kernel/debug/tracing/trace_options - - For example, to enable stacktrace option (to dump the - stack trace of each event), add to the command line: - - trace_options=stacktrace - - See also Documentation/trace/ftrace.rst "trace options" - section. - - tp_printk[FTRACE] + tp_printk [FTRACE] Have the tracepoints sent to printk as well as the tracing ring buffer. This is useful for early boot up where the system hangs or reboots and does not give the @@ -6045,7 +6012,7 @@ frequency tracepoints such as irq or sched, can cause the system to live lock. - tp_printk_stop_on_boot[FTRACE] + tp_printk_stop_on_boot [FTRACE] When tp_printk (above) is set, it can cause a lot of noise on the console. It may be useful to only include the printing of events during boot up, as user space may @@ -6054,6 +6021,53 @@ This command line option will stop the printing of events to console at the late_initcall_sync() time frame. + trace_buf_size=nn[KMG] + [FTRACE] will set tracing buffer size on each cpu. + + trace_clock= [FTRACE] Set the clock used for tracing events + at boot up. + local - Use the per CPU time stamp counter + (converted into nanoseconds). Fast, but + depending on the architecture, may not be + in sync between CPUs. + global - Event time stamps are synchronize across + CPUs. May be slower than the local clock, + but better for some race conditions. + counter - Simple counting of events (1, 2, ..) + note, some counts may be skipped due to the + infrastructure grabbing the clock more than + once per event. + uptime - Use jiffies as the time stamp. + perf - Use the same clock that perf uses. + mono - Use ktime_get_mono_fast_ns() for time stamps. + mono_raw - Use ktime_get_raw_fast_ns() for time + stamps. + boot - Use ktime_get_boot_fast_ns() for time stamps. + Architectures may add more clocks. See + Documentation/trace/ftrace.rst for more details. + + trace_event=[event-list] + [FTRACE] Set and start specified trace events in order + to facilitate early boot debugging. The event-list is a + comma-separated list of trace events to enable. See + also Documentation/trace/events.rst + + trace_options=[option-list] + [FTRACE] Enable or disable tracer options at boot. + The option-list is a comma delimited list of options + that can be enabled or disabled just as if you were + to echo the option name into + + /sys/kernel/debug/tracing/trace_options + + For example, to enable stacktrace option (to dump the + stack trace of each event), add to the command line: + + trace_options=stacktrace + + See also Documentation/trace/ftrace.rst "trace options" + section. + traceoff_on_warning [FTRACE] enable this option to disable tracing when a warning is hit. This turns off "tracing_on". Tracing can @@ -6405,7 +6419,7 @@ HIGHMEM regardless of setting of CONFIG_HIGHPTE. - vdso= [X86,SH] + vdso= [X86,SH,SPARC] On X86_32, this is an alias for vdso32=. Otherwise: vdso=1: enable VDSO (the default) @@ -6431,11 +6445,12 @@ video= [FB] Frame buffer configuration See Documentation/fb/modedb.rst. - video.brightness_switch_enabled= [0,1] + video.brightness_switch_enabled= [ACPI] + Format: [0|1] If set to 1, on receiving an ACPI notify event generated by hotkey, video driver will adjust brightness level and then send out the event to user space through - the allocated input device; If set to 0, video driver + the allocated input device. If set to 0, video driver will only send out the event without touching backlight brightness level. default: 1 diff --git a/Documentation/admin-guide/media/vimc.dot b/Documentation/admin-guide/media/vimc.dot index 57863a13fa39..8e829c164626 100644 --- a/Documentation/admin-guide/media/vimc.dot +++ b/Documentation/admin-guide/media/vimc.dot @@ -9,14 +9,14 @@ digraph board { n00000003:port0 -> n00000008:port0 [style=bold] n00000003:port0 -> n0000000f [style=bold] n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] - n00000005:port1 -> n00000017:port0 + n00000005:port1 -> n00000015:port0 n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] - n00000008:port1 -> n00000017:port0 [style=dashed] + n00000008:port1 -> n00000015:port0 [style=dashed] n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] - n00000013 [label="RGB/YUV Input\n/dev/video2", shape=box, style=filled, fillcolor=yellow] - n00000013 -> n00000017:port0 [style=dashed] - n00000017 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] - n00000017:port1 -> n0000001a [style=bold] - n0000001a [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000013 [label="{{} | RGB/YUV Input\n/dev/v4l-subdev4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000013:port0 -> n00000015:port0 [style=dashed] + n00000015 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000015:port1 -> n00000018 [style=bold] + n00000018 [label="RGB/YUV Capture\n/dev/video2", shape=box, style=filled, fillcolor=yellow] } diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst index 0af51a9705b1..46306f1f34b1 100644 --- a/Documentation/admin-guide/mm/damon/reclaim.rst +++ b/Documentation/admin-guide/mm/damon/reclaim.rst @@ -66,6 +66,17 @@ Setting it as ``N`` disables DAMON_RECLAIM. Note that DAMON_RECLAIM could do no real monitoring and reclamation due to the watermarks-based activation condition. Refer to below descriptions for the watermarks parameter for this. +commit_inputs +------------- + +Make DAMON_RECLAIM reads the input parameters again, except ``enabled``. + +Input parameters that updated while DAMON_RECLAIM is running are not applied +by default. Once this parameter is set as ``Y``, DAMON_RECLAIM reads values +of parametrs except ``enabled`` again. Once the re-reading is done, this +parameter is set as ``N``. If invalid parameters are found while the +re-reading, DAMON_RECLAIM will be disabled. + min_age ------- diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index 592ea9a50881..1bb7b72414b2 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -68,7 +68,7 @@ comma (","). :: │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts - │ │ │ │ 0/operations + │ │ │ │ 0/avail_operations,operations │ │ │ │ │ monitoring_attrs/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max @@ -121,10 +121,11 @@ In each kdamond directory, two files (``state`` and ``pid``) and one directory Reading ``state`` returns ``on`` if the kdamond is currently running, or ``off`` if it is not running. Writing ``on`` or ``off`` makes the kdamond be -in the state. Writing ``update_schemes_stats`` to ``state`` file updates the -contents of stats files for each DAMON-based operation scheme of the kdamond. -For details of the stats, please refer to :ref:`stats section -<sysfs_schemes_stats>`. +in the state. Writing ``commit`` to the ``state`` file makes kdamond reads the +user inputs in the sysfs files except ``state`` file again. Writing +``update_schemes_stats`` to ``state`` file updates the contents of stats files +for each DAMON-based operation scheme of the kdamond. For details of the +stats, please refer to :ref:`stats section <sysfs_schemes_stats>`. If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread. @@ -143,17 +144,28 @@ be written to the file. contexts/<N>/ ------------- -In each context directory, one file (``operations``) and three directories -(``monitoring_attrs``, ``targets``, and ``schemes``) exist. +In each context directory, two files (``avail_operations`` and ``operations``) +and three directories (``monitoring_attrs``, ``targets``, and ``schemes``) +exist. DAMON supports multiple types of monitoring operations, including those for -virtual address space and the physical address space. You can set and get what -type of monitoring operations DAMON will use for the context by writing one of -below keywords to, and reading from the file. +virtual address space and the physical address space. You can get the list of +available monitoring operations set on the currently running kernel by reading +``avail_operations`` file. Based on the kernel configuration, the file will +list some or all of below keywords. - vaddr: Monitor virtual address spaces of specific processes + - fvaddr: Monitor fixed virtual address ranges - paddr: Monitor the physical address space of the system +Please refer to :ref:`regions sysfs directory <sysfs_regions>` for detailed +differences between the operations sets in terms of the monitoring target +regions. + +You can set and get what type of monitoring operations DAMON will use for the +context by writing one of the keywords listed in ``avail_operations`` file and +reading from the ``operations`` file. + contexts/<N>/monitoring_attrs/ ------------------------------ @@ -192,6 +204,8 @@ If you wrote ``vaddr`` to the ``contexts/<N>/operations``, each target should be a process. You can specify the process to DAMON by writing the pid of the process to the ``pid_target`` file. +.. _sysfs_regions: + targets/<N>/regions ------------------- @@ -202,9 +216,10 @@ can be covered. However, users could want to set the initial monitoring region to specific address ranges. In contrast, DAMON do not automatically sets and updates the monitoring target -regions when ``paddr`` monitoring operations set is being used (``paddr`` is -written to the ``contexts/<N>/operations``). Therefore, users should set the -monitoring target regions by themselves in the case. +regions when ``fvaddr`` or ``paddr`` monitoring operations sets are being used +(``fvaddr`` or ``paddr`` have written to the ``contexts/<N>/operations``). +Therefore, users should set the monitoring target regions by themselves in the +cases. For such cases, users can explicitly set the initial monitoring target regions as they want, by writing proper values to the files under this directory. diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst index 0166f9de3428..a90330d0a837 100644 --- a/Documentation/admin-guide/mm/hugetlbpage.rst +++ b/Documentation/admin-guide/mm/hugetlbpage.rst @@ -164,7 +164,7 @@ default_hugepagesz will all result in 256 2M huge pages being allocated. Valid default huge page size is architecture dependent. hugetlb_free_vmemmap - When CONFIG_HUGETLB_PAGE_FREE_VMEMMAP is set, this enables freeing + When CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP is set, this enables optimizing unused vmemmap pages associated with each HugeTLB page. When multiple huge page sizes are supported, ``/proc/sys/vm/nr_hugepages`` diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst index 97d816791aca..b244f0202a03 100644 --- a/Documentation/admin-guide/mm/ksm.rst +++ b/Documentation/admin-guide/mm/ksm.rst @@ -184,6 +184,24 @@ The maximum possible ``pages_sharing/pages_shared`` ratio is limited by the ``max_page_sharing`` tunable. To increase the ratio ``max_page_sharing`` must be increased accordingly. +Monitoring KSM events +===================== + +There are some counters in /proc/vmstat that may be used to monitor KSM events. +KSM might help save memory, it's a tradeoff by may suffering delay on KSM COW +or on swapping in copy. Those events could help users evaluate whether or how +to use KSM. For example, if cow_ksm increases too fast, user may decrease the +range of madvise(, , MADV_MERGEABLE). + +cow_ksm + is incremented every time a KSM page triggers copy on write (COW) + when users try to write to a KSM page, we have to make a copy. + +ksm_swpin_copy + is incremented every time a KSM page is copied when swapping in + note that KSM page might be copied when swapping in because do_swap_page() + cannot do all the locking needed to reconstitute a cross-anon_vma KSM page. + -- Izik Eidus, Hugh Dickins, 17 Nov 2009 diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index e9c18dabc552..ddccd1077462 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -783,6 +783,13 @@ is useful to define the root cause of RCU stalls using a vmcore. 1 panic() after printing RCU stall messages. = ============================================================ +max_rcu_stall_to_panic +====================== + +When ``panic_on_rcu_stall`` is set to 1, this value determines the +number of times that RCU can stall before panic() is called. + +When ``panic_on_rcu_stall`` is set to 0, this value is has no effect. perf_cpu_time_max_percent ========================= diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index f86b5e1623c6..fcd650bdbc7e 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -322,6 +322,14 @@ a leaked reference faster. A larger value may be useful to prevent false warnings on slow/loaded systems. Default value is 10, minimum 1, maximum 3600. +skb_defer_max +------------- + +Max size (in skbs) of the per-cpu list of skbs being freed +by the cpu which allocated them. Used by TCP stack so far. + +Default: 64 + optmem_max ---------- @@ -374,6 +382,15 @@ option is set to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt). If set to 1 (default), hash rethink is performed on listening socket. If set to 0, hash rethink is not performed. +gro_normal_batch +---------------- + +Maximum number of the segments to batch up on output of GRO. When a packet +exits GRO, either as a coalesced superframe or as an original packet which +GRO has decided not to coalesce, it is placed on a per-NAPI list. This +list is then passed to the stack when the number of segments reaches the +gro_normal_batch limit. + 2. /proc/sys/net/unix - Parameters for Unix domain sockets ---------------------------------------------------------- diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst index f4804ce37c58..5c9aa171a0d3 100644 --- a/Documentation/admin-guide/sysctl/vm.rst +++ b/Documentation/admin-guide/sysctl/vm.rst @@ -62,6 +62,7 @@ Currently, these files are in /proc/sys/vm: - overcommit_memory - overcommit_ratio - page-cluster +- page_lock_unfairness - panic_on_oom - percpu_pagelist_high_fraction - stat_interval @@ -561,6 +562,45 @@ Change the minimum size of the hugepage pool. See Documentation/admin-guide/mm/hugetlbpage.rst +hugetlb_optimize_vmemmap +======================== + +This knob is not available when memory_hotplug.memmap_on_memory (kernel parameter) +is configured or the size of 'struct page' (a structure defined in +include/linux/mm_types.h) is not power of two (an unusual system config could +result in this). + +Enable (set to 1) or disable (set to 0) the feature of optimizing vmemmap pages +associated with each HugeTLB page. + +Once enabled, the vmemmap pages of subsequent allocation of HugeTLB pages from +buddy allocator will be optimized (7 pages per 2MB HugeTLB page and 4095 pages +per 1GB HugeTLB page), whereas already allocated HugeTLB pages will not be +optimized. When those optimized HugeTLB pages are freed from the HugeTLB pool +to the buddy allocator, the vmemmap pages representing that range needs to be +remapped again and the vmemmap pages discarded earlier need to be rellocated +again. If your use case is that HugeTLB pages are allocated 'on the fly' (e.g. +never explicitly allocating HugeTLB pages with 'nr_hugepages' but only set +'nr_overcommit_hugepages', those overcommitted HugeTLB pages are allocated 'on +the fly') instead of being pulled from the HugeTLB pool, you should weigh the +benefits of memory savings against the more overhead (~2x slower than before) +of allocation or freeing HugeTLB pages between the HugeTLB pool and the buddy +allocator. Another behavior to note is that if the system is under heavy memory +pressure, it could prevent the user from freeing HugeTLB pages from the HugeTLB +pool to the buddy allocator since the allocation of vmemmap pages could be +failed, you have to retry later if your system encounter this situation. + +Once disabled, the vmemmap pages of subsequent allocation of HugeTLB pages from +buddy allocator will not be optimized meaning the extra overhead at allocation +time from buddy allocator disappears, whereas already optimized HugeTLB pages +will not be affected. If you want to make sure there are no optimized HugeTLB +pages, you can set "nr_hugepages" to 0 first and then disable this. Note that +writing 0 to nr_hugepages will make any "in use" HugeTLB pages become surplus +pages. So, those surplus pages are still optimized until they are no longer +in use. You would need to wait for those surplus pages to be released before +there are no optimized pages in the system. + + nr_hugepages_mempolicy ====================== @@ -754,6 +794,14 @@ extra faults and I/O delays for following faults if they would have been part of that consecutive pages readahead would have brought in. +page_lock_unfairness +==================== + +This value determines the number of times that the page lock can be +stolen from under a waiter. After the lock is stolen the number of times +specified in this file (default is 5), the "fair lock handoff" semantics +will apply, and the waiter will only be awakened if the lock can be taken. + panic_on_oom ============ diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst index 749ae970c319..04ba83e1965f 100644 --- a/Documentation/arm64/cpu-feature-registers.rst +++ b/Documentation/arm64/cpu-feature-registers.rst @@ -290,6 +290,8 @@ infrastructure: +------------------------------+---------+---------+ | RPRES | [7-4] | y | +------------------------------+---------+---------+ + | WFXT | [3-0] | y | + +------------------------------+---------+---------+ Appendix I: Example diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst index f8d818eaaff5..3d116fb536c5 100644 --- a/Documentation/arm64/elf_hwcaps.rst +++ b/Documentation/arm64/elf_hwcaps.rst @@ -297,6 +297,10 @@ HWCAP2_SME_FA64 Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1. +HWCAP2_WFXT + + Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010. + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst index 5300837ac2c9..1de6a57c7e1e 100644 --- a/Documentation/bpf/instruction-set.rst +++ b/Documentation/bpf/instruction-set.rst @@ -130,7 +130,7 @@ Byte swap instructions The byte swap instructions use an instruction class of ``BFP_ALU`` and a 4-bit code field of ``BPF_END``. -The byte swap instructions instructions operate on the destination register +The byte swap instructions operate on the destination register only and do not use a separate source register or immediate value. The 1-bit source operand field in the opcode is used to to select what byte @@ -157,7 +157,7 @@ Examples: dst_reg = htobe64(dst_reg) ``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and -``BPF_TO_LE`` respetively. +``BPF_TO_BE`` respectively. Jump instructions diff --git a/Documentation/bpf/libbpf/index.rst b/Documentation/bpf/libbpf/index.rst index 4e8c656b539a..3722537d1384 100644 --- a/Documentation/bpf/libbpf/index.rst +++ b/Documentation/bpf/libbpf/index.rst @@ -6,14 +6,13 @@ libbpf .. toctree:: :maxdepth: 1 + API Documentation <https://libbpf.readthedocs.io/en/latest/api.html> libbpf_naming_convention libbpf_build This is documentation for libbpf, a userspace library for loading and interacting with bpf programs. -For API documentation see the `versioned API documentation site <https://libbpf.readthedocs.io/en/latest/api.html>`_. - All general BPF questions, including kernel functionality, libbpf APIs and their application, should be sent to bpf@vger.kernel.org mailing list. You can `subscribe <http://vger.kernel.org/vger-lists.html#bpf>`_ to the diff --git a/Documentation/cdrom/ide-cd.rst b/Documentation/cdrom/ide-cd.rst deleted file mode 100644 index bdccb74fc92d..000000000000 --- a/Documentation/cdrom/ide-cd.rst +++ /dev/null @@ -1,538 +0,0 @@ -IDE-CD driver documentation -=========================== - -:Originally by: scott snyder <snyder@fnald0.fnal.gov> (19 May 1996) -:Carrying on the torch is: Erik Andersen <andersee@debian.org> -:New maintainers (19 Oct 1998): Jens Axboe <axboe@image.dk> - -1. Introduction ---------------- - -The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant -CDROM drives which attach to an IDE interface. Note that some CDROM vendors -(including Mitsumi, Sony, Creative, Aztech, and Goldstar) have made -both ATAPI-compliant drives and drives which use a proprietary -interface. If your drive uses one of those proprietary interfaces, -this driver will not work with it (but one of the other CDROM drivers -probably will). This driver will not work with `ATAPI` drives which -attach to the parallel port. In addition, there is at least one drive -(CyCDROM CR520ie) which attaches to the IDE port but is not ATAPI; -this driver will not work with drives like that either (but see the -aztcd driver). - -This driver provides the following features: - - - Reading from data tracks, and mounting ISO 9660 filesystems. - - - Playing audio tracks. Most of the CDROM player programs floating - around should work; I usually use Workman. - - - Multisession support. - - - On drives which support it, reading digital audio data directly - from audio tracks. The program cdda2wav can be used for this. - Note, however, that only some drives actually support this. - - - There is now support for CDROM changers which comply with the - ATAPI 2.6 draft standard (such as the NEC CDR-251). This additional - functionality includes a function call to query which slot is the - currently selected slot, a function call to query which slots contain - CDs, etc. A sample program which demonstrates this functionality is - appended to the end of this file. The Sanyo 3-disc changer - (which does not conform to the standard) is also now supported. - Please note the driver refers to the first CD as slot # 0. - - -2. Installation ---------------- - -0. The ide-cd relies on the ide disk driver. See - Documentation/ide/ide.rst for up-to-date information on the ide - driver. - -1. Make sure that the ide and ide-cd drivers are compiled into the - kernel you're using. When configuring the kernel, in the section - entitled "Floppy, IDE, and other block devices", say either `Y` - (which will compile the support directly into the kernel) or `M` - (to compile support as a module which can be loaded and unloaded) - to the options:: - - ATA/ATAPI/MFM/RLL support - Include IDE/ATAPI CDROM support - - Depending on what type of IDE interface you have, you may need to - specify additional configuration options. See - Documentation/ide/ide.rst. - -2. You should also ensure that the iso9660 filesystem is either - compiled into the kernel or available as a loadable module. You - can see if a filesystem is known to the kernel by catting - /proc/filesystems. - -3. The CDROM drive should be connected to the host on an IDE - interface. Each interface on a system is defined by an I/O port - address and an IRQ number, the standard assignments being - 0x1f0 and 14 for the primary interface and 0x170 and 15 for the - secondary interface. Each interface can control up to two devices, - where each device can be a hard drive, a CDROM drive, a floppy drive, - or a tape drive. The two devices on an interface are called `master` - and `slave`; this is usually selectable via a jumper on the drive. - - Linux names these devices as follows. The master and slave devices - on the primary IDE interface are called `hda` and `hdb`, - respectively. The drives on the secondary interface are called - `hdc` and `hdd`. (Interfaces at other locations get other letters - in the third position; see Documentation/ide/ide.rst.) - - If you want your CDROM drive to be found automatically by the - driver, you should make sure your IDE interface uses either the - primary or secondary addresses mentioned above. In addition, if - the CDROM drive is the only device on the IDE interface, it should - be jumpered as `master`. (If for some reason you cannot configure - your system in this manner, you can probably still use the driver. - You may have to pass extra configuration information to the kernel - when you boot, however. See Documentation/ide/ide.rst for more - information.) - -4. Boot the system. If the drive is recognized, you should see a - message which looks like:: - - hdb: NEC CD-ROM DRIVE:260, ATAPI CDROM drive - - If you do not see this, see section 5 below. - -5. You may want to create a symbolic link /dev/cdrom pointing to the - actual device. You can do this with the command:: - - ln -s /dev/hdX /dev/cdrom - - where X should be replaced by the letter indicating where your - drive is installed. - -6. You should be able to see any error messages from the driver with - the `dmesg` command. - - -3. Basic usage --------------- - -An ISO 9660 CDROM can be mounted by putting the disc in the drive and -typing (as root):: - - mount -t iso9660 /dev/cdrom /mnt/cdrom - -where it is assumed that /dev/cdrom is a link pointing to the actual -device (as described in step 5 of the last section) and /mnt/cdrom is -an empty directory. You should now be able to see the contents of the -CDROM under the /mnt/cdrom directory. If you want to eject the CDROM, -you must first dismount it with a command like:: - - umount /mnt/cdrom - -Note that audio CDs cannot be mounted. - -Some distributions set up /etc/fstab to always try to mount a CDROM -filesystem on bootup. It is not required to mount the CDROM in this -manner, though, and it may be a nuisance if you change CDROMs often. -You should feel free to remove the cdrom line from /etc/fstab and -mount CDROMs manually if that suits you better. - -Multisession and photocd discs should work with no special handling. -The hpcdtoppm package (ftp.gwdg.de:/pub/linux/hpcdtoppm/) may be -useful for reading photocds. - -To play an audio CD, you should first unmount and remove any data -CDROM. Any of the CDROM player programs should then work (workman, -workbone, cdplayer, etc.). - -On a few drives, you can read digital audio directly using a program -such as cdda2wav. The only types of drive which I've heard support -this are Sony and Toshiba drives. You will get errors if you try to -use this function on a drive which does not support it. - -For supported changers, you can use the `cdchange` program (appended to -the end of this file) to switch between changer slots. Note that the -drive should be unmounted before attempting this. The program takes -two arguments: the CDROM device, and the slot number to which you wish -to change. If the slot number is -1, the drive is unloaded. - - -4. Common problems ------------------- - -This section discusses some common problems encountered when trying to -use the driver, and some possible solutions. Note that if you are -experiencing problems, you should probably also review -Documentation/ide/ide.rst for current information about the underlying -IDE support code. Some of these items apply only to earlier versions -of the driver, but are mentioned here for completeness. - -In most cases, you should probably check with `dmesg` for any errors -from the driver. - -a. Drive is not detected during booting. - - - Review the configuration instructions above and in - Documentation/ide/ide.rst, and check how your hardware is - configured. - - - If your drive is the only device on an IDE interface, it should - be jumpered as master, if at all possible. - - - If your IDE interface is not at the standard addresses of 0x170 - or 0x1f0, you'll need to explicitly inform the driver using a - lilo option. See Documentation/ide/ide.rst. (This feature was - added around kernel version 1.3.30.) - - - If the autoprobing is not finding your drive, you can tell the - driver to assume that one exists by using a lilo option of the - form `hdX=cdrom`, where X is the drive letter corresponding to - where your drive is installed. Note that if you do this and you - see a boot message like:: - - hdX: ATAPI cdrom (?) - - this does _not_ mean that the driver has successfully detected - the drive; rather, it means that the driver has not detected a - drive, but is assuming there's one there anyway because you told - it so. If you actually try to do I/O to a drive defined at a - nonexistent or nonresponding I/O address, you'll probably get - errors with a status value of 0xff. - - - Some IDE adapters require a nonstandard initialization sequence - before they'll function properly. (If this is the case, there - will often be a separate MS-DOS driver just for the controller.) - IDE interfaces on sound cards often fall into this category. - - Support for some interfaces needing extra initialization is - provided in later 1.3.x kernels. You may need to turn on - additional kernel configuration options to get them to work; - see Documentation/ide/ide.rst. - - Even if support is not available for your interface, you may be - able to get it to work with the following procedure. First boot - MS-DOS and load the appropriate drivers. Then warm-boot linux - (i.e., without powering off). If this works, it can be automated - by running loadlin from the MS-DOS autoexec. - - -b. Timeout/IRQ errors. - - - If you always get timeout errors, interrupts from the drive are - probably not making it to the host. - - - IRQ problems may also be indicated by the message - `IRQ probe failed (<n>)` while booting. If <n> is zero, that - means that the system did not see an interrupt from the drive when - it was expecting one (on any feasible IRQ). If <n> is negative, - that means the system saw interrupts on multiple IRQ lines, when - it was expecting to receive just one from the CDROM drive. - - - Double-check your hardware configuration to make sure that the IRQ - number of your IDE interface matches what the driver expects. - (The usual assignments are 14 for the primary (0x1f0) interface - and 15 for the secondary (0x170) interface.) Also be sure that - you don't have some other hardware which might be conflicting with - the IRQ you're using. Also check the BIOS setup for your system; - some have the ability to disable individual IRQ levels, and I've - had one report of a system which was shipped with IRQ 15 disabled - by default. - - - Note that many MS-DOS CDROM drivers will still function even if - there are hardware problems with the interrupt setup; they - apparently don't use interrupts. - - - If you own a Pioneer DR-A24X, you _will_ get nasty error messages - on boot such as "irq timeout: status=0x50 { DriveReady SeekComplete }" - The Pioneer DR-A24X CDROM drives are fairly popular these days. - Unfortunately, these drives seem to become very confused when we perform - the standard Linux ATA disk drive probe. If you own one of these drives, - you can bypass the ATA probing which confuses these CDROM drives, by - adding `append="hdX=noprobe hdX=cdrom"` to your lilo.conf file and running - lilo (again where X is the drive letter corresponding to where your drive - is installed.) - -c. System hangups. - - - If the system locks up when you try to access the CDROM, the most - likely cause is that you have a buggy IDE adapter which doesn't - properly handle simultaneous transactions on multiple interfaces. - The most notorious of these is the CMD640B chip. This problem can - be worked around by specifying the `serialize` option when - booting. Recent kernels should be able to detect the need for - this automatically in most cases, but the detection is not - foolproof. See Documentation/ide/ide.rst for more information - about the `serialize` option and the CMD640B. - - - Note that many MS-DOS CDROM drivers will work with such buggy - hardware, apparently because they never attempt to overlap CDROM - operations with other disk activity. - - -d. Can't mount a CDROM. - - - If you get errors from mount, it may help to check `dmesg` to see - if there are any more specific errors from the driver or from the - filesystem. - - - Make sure there's a CDROM loaded in the drive, and that's it's an - ISO 9660 disc. You can't mount an audio CD. - - - With the CDROM in the drive and unmounted, try something like:: - - cat /dev/cdrom | od | more - - If you see a dump, then the drive and driver are probably working - OK, and the problem is at the filesystem level (i.e., the CDROM is - not ISO 9660 or has errors in the filesystem structure). - - - If you see `not a block device` errors, check that the definitions - of the device special files are correct. They should be as - follows:: - - brw-rw---- 1 root disk 3, 0 Nov 11 18:48 /dev/hda - brw-rw---- 1 root disk 3, 64 Nov 11 18:48 /dev/hdb - brw-rw---- 1 root disk 22, 0 Nov 11 18:48 /dev/hdc - brw-rw---- 1 root disk 22, 64 Nov 11 18:48 /dev/hdd - - Some early Slackware releases had these defined incorrectly. If - these are wrong, you can remake them by running the script - scripts/MAKEDEV.ide. (You may have to make it executable - with chmod first.) - - If you have a /dev/cdrom symbolic link, check that it is pointing - to the correct device file. - - If you hear people talking of the devices `hd1a` and `hd1b`, these - were old names for what are now called hdc and hdd. Those names - should be considered obsolete. - - - If mount is complaining that the iso9660 filesystem is not - available, but you know it is (check /proc/filesystems), you - probably need a newer version of mount. Early versions would not - always give meaningful error messages. - - -e. Directory listings are unpredictably truncated, and `dmesg` shows - `buffer botch` error messages from the driver. - - - There was a bug in the version of the driver in 1.2.x kernels - which could cause this. It was fixed in 1.3.0. If you can't - upgrade, you can probably work around the problem by specifying a - blocksize of 2048 when mounting. (Note that you won't be able to - directly execute binaries off the CDROM in that case.) - - If you see this in kernels later than 1.3.0, please report it as a - bug. - - -f. Data corruption. - - - Random data corruption was occasionally observed with the Hitachi - CDR-7730 CDROM. If you experience data corruption, using "hdx=slow" - as a command line parameter may work around the problem, at the - expense of low system performance. - - -5. cdchange.c -------------- - -:: - - /* - * cdchange.c [-v] <device> [<slot>] - * - * This loads a CDROM from a specified slot in a changer, and displays - * information about the changer status. The drive should be unmounted before - * using this program. - * - * Changer information is displayed if either the -v flag is specified - * or no slot was specified. - * - * Based on code originally from Gerhard Zuber <zuber@berlin.snafu.de>. - * Changer status information, and rewrite for the new Uniform CDROM driver - * interface by Erik Andersen <andersee@debian.org>. - */ - - #include <stdio.h> - #include <stdlib.h> - #include <errno.h> - #include <string.h> - #include <unistd.h> - #include <fcntl.h> - #include <sys/ioctl.h> - #include <linux/cdrom.h> - - - int - main (int argc, char **argv) - { - char *program; - char *device; - int fd; /* file descriptor for CD-ROM device */ - int status; /* return status for system calls */ - int verbose = 0; - int slot=-1, x_slot; - int total_slots_available; - - program = argv[0]; - - ++argv; - --argc; - - if (argc < 1 || argc > 3) { - fprintf (stderr, "usage: %s [-v] <device> [<slot>]\n", - program); - fprintf (stderr, " Slots are numbered 1 -- n.\n"); - exit (1); - } - - if (strcmp (argv[0], "-v") == 0) { - verbose = 1; - ++argv; - --argc; - } - - device = argv[0]; - - if (argc == 2) - slot = atoi (argv[1]) - 1; - - /* open device */ - fd = open(device, O_RDONLY | O_NONBLOCK); - if (fd < 0) { - fprintf (stderr, "%s: open failed for `%s`: %s\n", - program, device, strerror (errno)); - exit (1); - } - - /* Check CD player status */ - total_slots_available = ioctl (fd, CDROM_CHANGER_NSLOTS); - if (total_slots_available <= 1 ) { - fprintf (stderr, "%s: Device `%s` is not an ATAPI " - "compliant CD changer.\n", program, device); - exit (1); - } - - if (slot >= 0) { - if (slot >= total_slots_available) { - fprintf (stderr, "Bad slot number. " - "Should be 1 -- %d.\n", - total_slots_available); - exit (1); - } - - /* load */ - slot=ioctl (fd, CDROM_SELECT_DISC, slot); - if (slot<0) { - fflush(stdout); - perror ("CDROM_SELECT_DISC "); - exit(1); - } - } - - if (slot < 0 || verbose) { - - status=ioctl (fd, CDROM_SELECT_DISC, CDSL_CURRENT); - if (status<0) { - fflush(stdout); - perror (" CDROM_SELECT_DISC"); - exit(1); - } - slot=status; - - printf ("Current slot: %d\n", slot+1); - printf ("Total slots available: %d\n", - total_slots_available); - - printf ("Drive status: "); - status = ioctl (fd, CDROM_DRIVE_STATUS, CDSL_CURRENT); - if (status<0) { - perror(" CDROM_DRIVE_STATUS"); - } else switch(status) { - case CDS_DISC_OK: - printf ("Ready.\n"); - break; - case CDS_TRAY_OPEN: - printf ("Tray Open.\n"); - break; - case CDS_DRIVE_NOT_READY: - printf ("Drive Not Ready.\n"); - break; - default: - printf ("This Should not happen!\n"); - break; - } - - for (x_slot=0; x_slot<total_slots_available; x_slot++) { - printf ("Slot %2d: ", x_slot+1); - status = ioctl (fd, CDROM_DRIVE_STATUS, x_slot); - if (status<0) { - perror(" CDROM_DRIVE_STATUS"); - } else switch(status) { - case CDS_DISC_OK: - printf ("Disc present."); - break; - case CDS_NO_DISC: - printf ("Empty slot."); - break; - case CDS_TRAY_OPEN: - printf ("CD-ROM tray open.\n"); - break; - case CDS_DRIVE_NOT_READY: - printf ("CD-ROM drive not ready.\n"); - break; - case CDS_NO_INFO: - printf ("No Information available."); - break; - default: - printf ("This Should not happen!\n"); - break; - } - if (slot == x_slot) { - status = ioctl (fd, CDROM_DISC_STATUS); - if (status<0) { - perror(" CDROM_DISC_STATUS"); - } - switch (status) { - case CDS_AUDIO: - printf ("\tAudio disc.\t"); - break; - case CDS_DATA_1: - case CDS_DATA_2: - printf ("\tData disc type %d.\t", status-CDS_DATA_1+1); - break; - case CDS_XA_2_1: - case CDS_XA_2_2: - printf ("\tXA data disc type %d.\t", status-CDS_XA_2_1+1); - break; - default: - printf ("\tUnknown disc type 0x%x!\t", status); - break; - } - } - status = ioctl (fd, CDROM_MEDIA_CHANGED, x_slot); - if (status<0) { - perror(" CDROM_MEDIA_CHANGED"); - } - switch (status) { - case 1: - printf ("Changed.\n"); - break; - default: - printf ("\n"); - break; - } - } - } - - /* close device */ - status = close (fd); - if (status != 0) { - fprintf (stderr, "%s: close failed for `%s`: %s\n", - program, device, strerror (errno)); - exit (1); - } - - exit (0); - } diff --git a/Documentation/cdrom/index.rst b/Documentation/cdrom/index.rst index 338ad5f94e7c..e87a8785bc1a 100644 --- a/Documentation/cdrom/index.rst +++ b/Documentation/cdrom/index.rst @@ -8,7 +8,6 @@ cdrom :maxdepth: 1 cdrom-standard - ide-cd packet-writing .. only:: subproject and html diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 972d46a5ddf6..dedd4d853329 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -18,8 +18,10 @@ it. kernel-api workqueue + watch_queue printk-basics printk-formats + printk-index symbol-namespaces Data structures and low-level utilities diff --git a/Documentation/core-api/printk-index.rst b/Documentation/core-api/printk-index.rst new file mode 100644 index 000000000000..3062f37d119b --- /dev/null +++ b/Documentation/core-api/printk-index.rst @@ -0,0 +1,137 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Printk Index +============ + +There are many ways how to monitor the state of the system. One important +source of information is the system log. It provides a lot of information, +including more or less important warnings and error messages. + +There are monitoring tools that filter and take action based on messages +logged. + +The kernel messages are evolving together with the code. As a result, +particular kernel messages are not KABI and never will be! + +It is a huge challenge for maintaining the system log monitors. It requires +knowing what messages were updated in a particular kernel version and why. +Finding these changes in the sources would require non-trivial parsers. +Also it would require matching the sources with the binary kernel which +is not always trivial. Various changes might be backported. Various kernel +versions might be used on different monitored systems. + +This is where the printk index feature might become useful. It provides +a dump of printk formats used all over the source code used for the kernel +and modules on the running system. It is accessible at runtime via debugfs. + +The printk index helps to find changes in the message formats. Also it helps +to track the strings back to the kernel sources and the related commit. + + +User Interface +============== + +The index of printk formats are split in into separate files. The files are +named according to the binaries where the printk formats are built-in. There +is always "vmlinux" and optionally also modules, for example:: + + /sys/kernel/debug/printk/index/vmlinux + /sys/kernel/debug/printk/index/ext4 + /sys/kernel/debug/printk/index/scsi_mod + +Note that only loaded modules are shown. Also printk formats from a module +might appear in "vmlinux" when the module is built-in. + +The content is inspired by the dynamic debug interface and looks like:: + + $> head -1 /sys/kernel/debug/printk/index/vmlinux; shuf -n 5 vmlinux + # <level[,flags]> filename:line function "format" + <5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n" + <4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n" + <6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n" + <6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n" + <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n" + +, where the meaning is: + + - :level: log level value: 0-7 for particular severity, -1 as default, + 'c' as continuous line without an explicit log level + - :flags: optional flags: currently only 'c' for KERN_CONT + - :filename\:line: source filename and line number of the related + printk() call. Note that there are many wrappers, for example, + pr_warn(), pr_warn_once(), dev_warn(). + - :function: function name where the printk() call is used. + - :format: format string + +The extra information makes it a bit harder to find differences +between various kernels. Especially the line number might change +very often. On the other hand, it helps a lot to confirm that +it is the same string or find the commit that is responsible +for eventual changes. + + +printk() Is Not a Stable KABI +============================= + +Several developers are afraid that exporting all these implementation +details into the user space will transform particular printk() calls +into KABI. + +But it is exactly the opposite. printk() calls must _not_ be KABI. +And the printk index helps user space tools to deal with this. + + +Subsystem specific printk wrappers +================================== + +The printk index is generated using extra metadata that are stored in +a dedicated .elf section ".printk_index". It is achieved using macro +wrappers doing __printk_index_emit() together with the real printk() +call. The same technique is used also for the metadata used by +the dynamic debug feature. + +The metadata are stored for a particular message only when it is printed +using these special wrappers. It is implemented for the commonly +used printk() calls, including, for example, pr_warn(), or pr_once(). + +Additional changes are necessary for various subsystem specific wrappers +that call the original printk() via a common helper function. These needs +their own wrappers adding __printk_index_emit(). + +Only few subsystem specific wrappers have been updated so far, +for example, dev_printk(). As a result, the printk formats from +some subsystes can be missing in the printk index. + + +Subsystem specific prefix +========================= + +The macro pr_fmt() macro allows to define a prefix that is printed +before the string generated by the related printk() calls. + +Subsystem specific wrappers usually add even more complicated +prefixes. + +These prefixes can be stored into the printk index metadata +by an optional parameter of __printk_index_emit(). The debugfs +interface might then show the printk formats including these prefixes. +For example, drivers/acpi/osl.c contains:: + + #define pr_fmt(fmt) "ACPI: OSL: " fmt + + static int __init acpi_no_auto_serialize_setup(char *str) + { + acpi_gbl_auto_serialize_methods = FALSE; + pr_info("Auto-serialization disabled\n"); + + return 1; + } + +This results in the following printk index entry:: + + <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n" + +It helps matching messages from the real log with printk index. +Then the source file name, line number, and function name can +be used to match the string with the source code. diff --git a/Documentation/watch_queue.rst b/Documentation/core-api/watch_queue.rst index 54f13ad5fc17..54f13ad5fc17 100644 --- a/Documentation/watch_queue.rst +++ b/Documentation/core-api/watch_queue.rst diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index 7614a1fc30fa..1772fd457fed 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -4,39 +4,76 @@ The Kernel Address Sanitizer (KASAN) Overview -------- -KernelAddressSANitizer (KASAN) is a dynamic memory safety error detector -designed to find out-of-bound and use-after-free bugs. KASAN has three modes: +Kernel Address Sanitizer (KASAN) is a dynamic memory safety error detector +designed to find out-of-bounds and use-after-free bugs. -1. generic KASAN (similar to userspace ASan), -2. software tag-based KASAN (similar to userspace HWASan), -3. hardware tag-based KASAN (based on hardware memory tagging). +KASAN has three modes: -Generic KASAN is mainly used for debugging due to a large memory overhead. -Software tag-based KASAN can be used for dogfood testing as it has a lower -memory overhead that allows using it with real workloads. Hardware tag-based -KASAN comes with low memory and performance overheads and, therefore, can be -used in production. Either as an in-field memory bug detector or as a security -mitigation. +1. Generic KASAN +2. Software Tag-Based KASAN +3. Hardware Tag-Based KASAN -Software KASAN modes (#1 and #2) use compile-time instrumentation to insert -validity checks before every memory access and, therefore, require a compiler -version that supports that. +Generic KASAN, enabled with CONFIG_KASAN_GENERIC, is the mode intended for +debugging, similar to userspace ASan. This mode is supported on many CPU +architectures, but it has significant performance and memory overheads. -Generic KASAN is supported in GCC and Clang. With GCC, it requires version -8.3.0 or later. Any supported Clang version is compatible, but detection of -out-of-bounds accesses for global variables is only supported since Clang 11. +Software Tag-Based KASAN or SW_TAGS KASAN, enabled with CONFIG_KASAN_SW_TAGS, +can be used for both debugging and dogfood testing, similar to userspace HWASan. +This mode is only supported for arm64, but its moderate memory overhead allows +using it for testing on memory-restricted devices with real workloads. -Software tag-based KASAN mode is only supported in Clang. +Hardware Tag-Based KASAN or HW_TAGS KASAN, enabled with CONFIG_KASAN_HW_TAGS, +is the mode intended to be used as an in-field memory bug detector or as a +security mitigation. This mode only works on arm64 CPUs that support MTE +(Memory Tagging Extension), but it has low memory and performance overheads and +thus can be used in production. -The hardware KASAN mode (#3) relies on hardware to perform the checks but -still requires a compiler version that supports memory tagging instructions. -This mode is supported in GCC 10+ and Clang 12+. +For details about the memory and performance impact of each KASAN mode, see the +descriptions of the corresponding Kconfig options. -Both software KASAN modes work with SLUB and SLAB memory allocators, -while the hardware tag-based KASAN currently only supports SLUB. +The Generic and the Software Tag-Based modes are commonly referred to as the +software modes. The Software Tag-Based and the Hardware Tag-Based modes are +referred to as the tag-based modes. -Currently, generic KASAN is supported for the x86_64, arm, arm64, xtensa, s390, -and riscv architectures, and tag-based KASAN modes are supported only for arm64. +Support +------- + +Architectures +~~~~~~~~~~~~~ + +Generic KASAN is supported on x86_64, arm, arm64, powerpc, riscv, s390, and +xtensa, and the tag-based KASAN modes are supported only on arm64. + +Compilers +~~~~~~~~~ + +Software KASAN modes use compile-time instrumentation to insert validity checks +before every memory access and thus require a compiler version that provides +support for that. The Hardware Tag-Based mode relies on hardware to perform +these checks but still requires a compiler version that supports the memory +tagging instructions. + +Generic KASAN requires GCC version 8.3.0 or later +or any Clang version supported by the kernel. + +Software Tag-Based KASAN requires GCC 11+ +or any Clang version supported by the kernel. + +Hardware Tag-Based KASAN requires GCC 10+ or Clang 12+. + +Memory types +~~~~~~~~~~~~ + +Generic KASAN supports finding bugs in all of slab, page_alloc, vmap, vmalloc, +stack, and global memory. + +Software Tag-Based KASAN supports slab, page_alloc, vmalloc, and stack memory. + +Hardware Tag-Based KASAN supports slab, page_alloc, and non-executable vmalloc +memory. + +For slab, both software KASAN modes support SLUB and SLAB allocators, while +Hardware Tag-Based KASAN only supports SLUB. Usage ----- @@ -45,18 +82,59 @@ To enable KASAN, configure the kernel with:: CONFIG_KASAN=y -and choose between ``CONFIG_KASAN_GENERIC`` (to enable generic KASAN), -``CONFIG_KASAN_SW_TAGS`` (to enable software tag-based KASAN), and -``CONFIG_KASAN_HW_TAGS`` (to enable hardware tag-based KASAN). +and choose between ``CONFIG_KASAN_GENERIC`` (to enable Generic KASAN), +``CONFIG_KASAN_SW_TAGS`` (to enable Software Tag-Based KASAN), and +``CONFIG_KASAN_HW_TAGS`` (to enable Hardware Tag-Based KASAN). -For software modes, also choose between ``CONFIG_KASAN_OUTLINE`` and +For the software modes, also choose between ``CONFIG_KASAN_OUTLINE`` and ``CONFIG_KASAN_INLINE``. Outline and inline are compiler instrumentation types. -The former produces a smaller binary while the latter is 1.1-2 times faster. +The former produces a smaller binary while the latter is up to 2 times faster. To include alloc and free stack traces of affected slab objects into reports, enable ``CONFIG_STACKTRACE``. To include alloc and free stack traces of affected physical pages, enable ``CONFIG_PAGE_OWNER`` and boot with ``page_owner=on``. +Boot parameters +~~~~~~~~~~~~~~~ + +KASAN is affected by the generic ``panic_on_warn`` command line parameter. +When it is enabled, KASAN panics the kernel after printing a bug report. + +By default, KASAN prints a bug report only for the first invalid memory access. +With ``kasan_multi_shot``, KASAN prints a report on every invalid access. This +effectively disables ``panic_on_warn`` for KASAN reports. + +Alternatively, independent of ``panic_on_warn``, the ``kasan.fault=`` boot +parameter can be used to control panic and reporting behaviour: + +- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN + report or also panic the kernel (default: ``report``). The panic happens even + if ``kasan_multi_shot`` is enabled. + +Hardware Tag-Based KASAN mode (see the section about various modes below) is +intended for use in production as a security mitigation. Therefore, it supports +additional boot parameters that allow disabling KASAN or controlling features: + +- ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``). + +- ``kasan.mode=sync``, ``=async`` or ``=asymm`` controls whether KASAN + is configured in synchronous, asynchronous or asymmetric mode of + execution (default: ``sync``). + Synchronous mode: a bad access is detected immediately when a tag + check fault occurs. + Asynchronous mode: a bad access detection is delayed. When a tag check + fault occurs, the information is stored in hardware (in the TFSR_EL1 + register for arm64). The kernel periodically checks the hardware and + only reports tag faults during these checks. + Asymmetric mode: a bad access is detected synchronously on reads and + asynchronously on writes. + +- ``kasan.vmalloc=off`` or ``=on`` disables or enables tagging of vmalloc + allocations (default: ``on``). + +- ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack + traces collection (default: ``on``). + Error reports ~~~~~~~~~~~~~ @@ -146,7 +224,7 @@ is either 8 or 16 aligned bytes depending on KASAN mode. Each number in the memory state section of the report shows the state of one of the memory granules that surround the accessed address. -For generic KASAN, the size of each memory granule is 8. The state of each +For Generic KASAN, the size of each memory granule is 8. The state of each granule is encoded in one shadow byte. Those 8 bytes can be accessible, partially accessible, freed, or be a part of a redzone. KASAN uses the following encoding for each shadow byte: 00 means that all 8 bytes of the corresponding @@ -171,47 +249,6 @@ traces point to places in code that interacted with the object but that are not directly present in the bad access stack trace. Currently, this includes call_rcu() and workqueue queuing. -Boot parameters -~~~~~~~~~~~~~~~ - -KASAN is affected by the generic ``panic_on_warn`` command line parameter. -When it is enabled, KASAN panics the kernel after printing a bug report. - -By default, KASAN prints a bug report only for the first invalid memory access. -With ``kasan_multi_shot``, KASAN prints a report on every invalid access. This -effectively disables ``panic_on_warn`` for KASAN reports. - -Alternatively, independent of ``panic_on_warn`` the ``kasan.fault=`` boot -parameter can be used to control panic and reporting behaviour: - -- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN - report or also panic the kernel (default: ``report``). The panic happens even - if ``kasan_multi_shot`` is enabled. - -Hardware tag-based KASAN mode (see the section about various modes below) is -intended for use in production as a security mitigation. Therefore, it supports -additional boot parameters that allow disabling KASAN or controlling features: - -- ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``). - -- ``kasan.mode=sync``, ``=async`` or ``=asymm`` controls whether KASAN - is configured in synchronous, asynchronous or asymmetric mode of - execution (default: ``sync``). - Synchronous mode: a bad access is detected immediately when a tag - check fault occurs. - Asynchronous mode: a bad access detection is delayed. When a tag check - fault occurs, the information is stored in hardware (in the TFSR_EL1 - register for arm64). The kernel periodically checks the hardware and - only reports tag faults during these checks. - Asymmetric mode: a bad access is detected synchronously on reads and - asynchronously on writes. - -- ``kasan.vmalloc=off`` or ``=on`` disables or enables tagging of vmalloc - allocations (default: ``on``). - -- ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack - traces collection (default: ``on``). - Implementation details ---------------------- @@ -250,49 +287,46 @@ outline-instrumented kernel. Generic KASAN is the only mode that delays the reuse of freed objects via quarantine (see mm/kasan/quarantine.c for implementation). -Software tag-based KASAN +Software Tag-Based KASAN ~~~~~~~~~~~~~~~~~~~~~~~~ -Software tag-based KASAN uses a software memory tagging approach to checking +Software Tag-Based KASAN uses a software memory tagging approach to checking access validity. It is currently only implemented for the arm64 architecture. -Software tag-based KASAN uses the Top Byte Ignore (TBI) feature of arm64 CPUs +Software Tag-Based KASAN uses the Top Byte Ignore (TBI) feature of arm64 CPUs to store a pointer tag in the top byte of kernel pointers. It uses shadow memory to store memory tags associated with each 16-byte memory cell (therefore, it dedicates 1/16th of the kernel memory for shadow memory). -On each memory allocation, software tag-based KASAN generates a random tag, tags +On each memory allocation, Software Tag-Based KASAN generates a random tag, tags the allocated memory with this tag, and embeds the same tag into the returned pointer. -Software tag-based KASAN uses compile-time instrumentation to insert checks +Software Tag-Based KASAN uses compile-time instrumentation to insert checks before each memory access. These checks make sure that the tag of the memory that is being accessed is equal to the tag of the pointer that is used to access -this memory. In case of a tag mismatch, software tag-based KASAN prints a bug +this memory. In case of a tag mismatch, Software Tag-Based KASAN prints a bug report. -Software tag-based KASAN also has two instrumentation modes (outline, which +Software Tag-Based KASAN also has two instrumentation modes (outline, which emits callbacks to check memory accesses; and inline, which performs the shadow memory checks inline). With outline instrumentation mode, a bug report is printed from the function that performs the access check. With inline instrumentation, a ``brk`` instruction is emitted by the compiler, and a dedicated ``brk`` handler is used to print bug reports. -Software tag-based KASAN uses 0xFF as a match-all pointer tag (accesses through +Software Tag-Based KASAN uses 0xFF as a match-all pointer tag (accesses through pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently reserved to tag freed memory regions. -Software tag-based KASAN currently only supports tagging of slab, page_alloc, -and vmalloc memory. - -Hardware tag-based KASAN +Hardware Tag-Based KASAN ~~~~~~~~~~~~~~~~~~~~~~~~ -Hardware tag-based KASAN is similar to the software mode in concept but uses +Hardware Tag-Based KASAN is similar to the software mode in concept but uses hardware memory tagging support instead of compiler instrumentation and shadow memory. -Hardware tag-based KASAN is currently only implemented for arm64 architecture +Hardware Tag-Based KASAN is currently only implemented for arm64 architecture and based on both arm64 Memory Tagging Extension (MTE) introduced in ARMv8.5 Instruction Set Architecture and Top Byte Ignore (TBI). @@ -302,21 +336,18 @@ access, hardware makes sure that the tag of the memory that is being accessed is equal to the tag of the pointer that is used to access this memory. In case of a tag mismatch, a fault is generated, and a report is printed. -Hardware tag-based KASAN uses 0xFF as a match-all pointer tag (accesses through +Hardware Tag-Based KASAN uses 0xFF as a match-all pointer tag (accesses through pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently reserved to tag freed memory regions. -Hardware tag-based KASAN currently only supports tagging of slab, page_alloc, -and VM_ALLOC-based vmalloc memory. - -If the hardware does not support MTE (pre ARMv8.5), hardware tag-based KASAN +If the hardware does not support MTE (pre ARMv8.5), Hardware Tag-Based KASAN will not be enabled. In this case, all KASAN boot parameters are ignored. Note that enabling CONFIG_KASAN_HW_TAGS always results in in-kernel TBI being enabled. Even when ``kasan.mode=off`` is provided or when the hardware does not support MTE (but supports TBI). -Hardware tag-based KASAN only reports the first found bug. After that, MTE tag +Hardware Tag-Based KASAN only reports the first found bug. After that, MTE tag checking gets disabled. Shadow memory @@ -414,19 +445,18 @@ generic ``noinstr`` one. Note that disabling compiler instrumentation (either on a per-file or a per-function basis) makes KASAN ignore the accesses that happen directly in that code for software KASAN modes. It does not help when the accesses happen -indirectly (through calls to instrumented functions) or with the hardware -tag-based mode that does not use compiler instrumentation. +indirectly (through calls to instrumented functions) or with Hardware +Tag-Based KASAN, which does not use compiler instrumentation. For software KASAN modes, to disable KASAN reports in a part of the kernel code for the current task, annotate this part of the code with a ``kasan_disable_current()``/``kasan_enable_current()`` section. This also disables the reports for indirect accesses that happen through function calls. -For tag-based KASAN modes (include the hardware one), to disable access -checking, use ``kasan_reset_tag()`` or ``page_kasan_tag_reset()``. Note that -temporarily disabling access checking via ``page_kasan_tag_reset()`` requires -saving and restoring the per-page KASAN tag via -``page_kasan_tag``/``page_kasan_tag_set``. +For tag-based KASAN modes, to disable access checking, use +``kasan_reset_tag()`` or ``page_kasan_tag_reset()``. Note that temporarily +disabling access checking via ``page_kasan_tag_reset()`` requires saving and +restoring the per-page KASAN tag via ``page_kasan_tag``/``page_kasan_tag_set``. Tests ~~~~~ diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst index 5ee735c6687f..d0a9565b0f44 100644 --- a/Documentation/dev-tools/ktap.rst +++ b/Documentation/dev-tools/ktap.rst @@ -115,34 +115,32 @@ The diagnostic data field is optional, and results which have neither a directive nor any diagnostic data do not need to include the "#" field separator. -Example result lines include: - -.. code-block:: none +Example result lines include:: ok 1 test_case_name The test "test_case_name" passed. -.. code-block:: none +:: not ok 1 test_case_name The test "test_case_name" failed. -.. code-block:: none +:: ok 1 test # SKIP necessary dependency unavailable The test "test" was SKIPPED with the diagnostic message "necessary dependency unavailable". -.. code-block:: none +:: not ok 1 test # TIMEOUT 30 seconds The test "test" timed out, with diagnostic data "30 seconds". -.. code-block:: none +:: ok 5 check return code # rcode=0 @@ -202,7 +200,7 @@ allowed to be either indented or not indented. An example of a test with two nested subtests: -.. code-block:: none +:: KTAP version 1 1..1 @@ -215,7 +213,7 @@ An example of a test with two nested subtests: An example format with multiple levels of nested testing: -.. code-block:: none +:: KTAP version 1 1..2 @@ -250,7 +248,7 @@ nested version line, uses a line of the form Example KTAP output -------------------- -.. code-block:: none +:: KTAP version 1 1..1 diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst index 3006cadcf44a..45ce04823f9f 100644 --- a/Documentation/dev-tools/kunit/api/index.rst +++ b/Documentation/dev-tools/kunit/api/index.rst @@ -6,6 +6,7 @@ API Reference .. toctree:: test + resource This section documents the KUnit kernel testing API. It is divided into the following sections: @@ -13,3 +14,7 @@ following sections: Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API + +Documentation/dev-tools/kunit/api/resource.rst + + - documents the KUnit resource API diff --git a/Documentation/dev-tools/kunit/api/resource.rst b/Documentation/dev-tools/kunit/api/resource.rst new file mode 100644 index 000000000000..0a94f831259e --- /dev/null +++ b/Documentation/dev-tools/kunit/api/resource.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Resource API +============ + +This file documents the KUnit resource API. + +Most users won't need to use this API directly, power users can use it to store +state on a per-test basis, register custom cleanup actions, and more. + +.. kernel-doc:: include/kunit/resource.h + :internal: diff --git a/Documentation/dev-tools/kunit/architecture.rst b/Documentation/dev-tools/kunit/architecture.rst index ff9c85a0bff2..cf9e6e3eeae4 100644 --- a/Documentation/dev-tools/kunit/architecture.rst +++ b/Documentation/dev-tools/kunit/architecture.rst @@ -125,7 +125,7 @@ All expectations/assertions are formatted as: ``void __noreturn kunit_try_catch_throw(struct kunit_try_catch *try_catch)``. - ``kunit_try_catch_throw`` calls function: - ``void complete_and_exit(struct completion *, long) __noreturn;`` + ``void kthread_complete_and_exit(struct completion *, long) __noreturn;`` and terminates the special thread context. - ``<op>`` denotes a check with options: ``TRUE`` (supplied property diff --git a/Documentation/dev-tools/kunit/running_tips.rst b/Documentation/dev-tools/kunit/running_tips.rst index 7b6d26a25959..c36f6760087d 100644 --- a/Documentation/dev-tools/kunit/running_tips.rst +++ b/Documentation/dev-tools/kunit/running_tips.rst @@ -114,6 +114,7 @@ Instead of enabling ``CONFIG_GCOV_KERNEL=y``, we can set these options: CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y + CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_GCOV=y @@ -122,7 +123,7 @@ Putting it together into a copy-pastable sequence of commands: .. code-block:: bash # Append coverage options to the current config - $ echo -e "CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y\nCONFIG_GCOV=y" >> .kunit/.kunitconfig + $ echo -e "CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y\nCONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y\nCONFIG_GCOV=y" >> .kunit/.kunitconfig $ ./tools/testing/kunit/kunit.py run # Extract the coverage information from the build dir (.kunit/) $ lcov -t "my_kunit_tests" -o coverage.info -c -d .kunit/ diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 1c83e7d60a8a..d62a04255c2e 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -125,8 +125,8 @@ We need many test cases covering all the unit's behaviors. It is common to have many similar tests. In order to reduce duplication in these closely related tests, most unit testing frameworks (including KUnit) provide the concept of a *test suite*. A test suite is a collection of test cases for a unit of code -with a setup function that gets invoked before every test case and then a tear -down function that gets invoked after every test case completes. For example: +with optional setup and teardown functions that run before/after the whole +suite and/or every test case. For example: .. code-block:: c @@ -141,16 +141,19 @@ down function that gets invoked after every test case completes. For example: .name = "example", .init = example_test_init, .exit = example_test_exit, + .suite_init = example_suite_init, + .suite_exit = example_suite_exit, .test_cases = example_test_cases, }; kunit_test_suite(example_test_suite); -In the above example, the test suite ``example_test_suite`` would run the test -cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``. Each -would have ``example_test_init`` called immediately before it and -``example_test_exit`` called immediately after it. -``kunit_test_suite(example_test_suite)`` registers the test suite with the -KUnit test framework. +In the above example, the test suite ``example_test_suite`` would first run +``example_suite_init``, then run the test cases ``example_test_foo``, +``example_test_bar``, and ``example_test_baz``. Each would have +``example_test_init`` called immediately before it and ``example_test_exit`` +called immediately after it. Finally, ``example_suite_exit`` would be called +after everything else. ``kunit_test_suite(example_test_suite)`` registers the +test suite with the KUnit test framework. .. note:: A test case will only run if it is associated with a test suite. diff --git a/Documentation/dev-tools/testing-overview.rst b/Documentation/dev-tools/testing-overview.rst index 65feb81edb14..0aaf6ea53608 100644 --- a/Documentation/dev-tools/testing-overview.rst +++ b/Documentation/dev-tools/testing-overview.rst @@ -115,3 +115,66 @@ that none of these errors are occurring during the test. Some of these tools integrate with KUnit or kselftest and will automatically fail tests if an issue is detected. +Static Analysis Tools +===================== + +In addition to testing a running kernel, one can also analyze kernel source code +directly (**at compile time**) using **static analysis** tools. The tools +commonly used in the kernel allow one to inspect the whole source tree or just +specific files within it. They make it easier to detect and fix problems during +the development process. + +Sparse can help test the kernel by performing type-checking, lock checking, +value range checking, in addition to reporting various errors and warnings while +examining the code. See the Documentation/dev-tools/sparse.rst documentation +page for details on how to use it. + +Smatch extends Sparse and provides additional checks for programming logic +mistakes such as missing breaks in switch statements, unused return values on +error checking, forgetting to set an error code in the return of an error path, +etc. Smatch also has tests against more serious issues such as integer +overflows, null pointer dereferences, and memory leaks. See the project page at +http://smatch.sourceforge.net/. + +Coccinelle is another static analyzer at our disposal. Coccinelle is often used +to aid refactoring and collateral evolution of source code, but it can also help +to avoid certain bugs that occur in common code patterns. The types of tests +available include API tests, tests for correct usage of kernel iterators, checks +for the soundness of free operations, analysis of locking behavior, and further +tests known to help keep consistent kernel usage. See the +Documentation/dev-tools/coccinelle.rst documentation page for details. + +Beware, though, that static analysis tools suffer from **false positives**. +Errors and warns need to be evaluated carefully before attempting to fix them. + +When to use Sparse and Smatch +----------------------------- + +Sparse does type checking, such as verifying that annotated variables do not +cause endianness bugs, detecting places that use ``__user`` pointers improperly, +and analyzing the compatibility of symbol initializers. + +Smatch does flow analysis and, if allowed to build the function database, it +also does cross function analysis. Smatch tries to answer questions like where +is this buffer allocated? How big is it? Can this index be controlled by the +user? Is this variable larger than that variable? + +It's generally easier to write checks in Smatch than it is to write checks in +Sparse. Nevertheless, there are some overlaps between Sparse and Smatch checks. + +Strong points of Smatch and Coccinelle +-------------------------------------- + +Coccinelle is probably the easiest for writing checks. It works before the +pre-processor so it's easier to check for bugs in macros using Coccinelle. +Coccinelle also creates patches for you, which no other tool does. + +For example, with Coccinelle you can do a mass conversion from +``kmalloc(x * size, GFP_KERNEL)`` to ``kmalloc_array(x, size, GFP_KERNEL)``, and +that's really useful. If you just created a Smatch warning and try to push the +work of converting on to the maintainers they would be annoyed. You'd have to +argue about each warning if can really overflow or not. + +Coccinelle does no analysis of variable values, which is the strong point of +Smatch. On the other hand, Coccinelle allows you to do simple things in a simple +way. diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml new file mode 100644 index 000000000000..a77f88223801 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Corstone1000 Device Tree Bindings + +maintainers: + - Vishnu Banavath <vishnu.banavath@arm.com> + - Rui Miguel Silva <rui.silva@linaro.org> + +description: |+ + ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that + provides a flexible compute architecture that combines Cortex‑A and Cortex‑M + processors. + + Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion + systems for M-Class (or other) processors for adding sensors, connectivity, + video, audio and machine learning at the edge System and security IPs to build + a secure SoC for a range of rich IoT applications, for example gateways, smart + cameras and embedded systems. + + Integrated Secure Enclave providing hardware Root of Trust and supporting + seamless integration of the optional CryptoCellâ„¢-312 cryptographic + accelerator. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA + implementation of the Corstone1000 in the MPS3 prototyping board. See + ARM document DAI0550. + items: + - const: arm,corstone1000-mps3 + - description: Corstone1000 FVP is the Fixed Virtual Platform + implementation of this system. See ARM ecosystems FVP's. + items: + - const: arm,corstone1000-fvp + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 434d3c6db61e..8b7e87fb6c34 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -64,6 +64,7 @@ properties: - description: BCM47094 based boards items: - enum: + - asus,rt-ac88u - dlink,dir-885l - linksys,panamera - luxul,abr-4500-v1 @@ -83,9 +84,14 @@ properties: - brcm,bcm953012er - brcm,bcm953012hr - brcm,bcm953012k + - const: brcm,bcm53012 + - const: brcm,bcm4708 + + - description: BCM53016 based boards + items: + - enum: - meraki,mr32 - - const: brcm,brcm53012 - - const: brcm,brcm53016 + - const: brcm,bcm53016 - const: brcm,bcm4708 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt index 8c7a4908a849..a8866c6e9d46 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt @@ -30,7 +30,7 @@ Example: cpus { cpu@0 { - compatible = "arm,cotex-a9"; + compatible = "arm,cortex-a9"; reg = <0>; ... enable-method = "brcm,bcm63138"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml new file mode 100644 index 000000000000..5fb455840417 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Broadband SoC device tree bindings + +description: + Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless + chips that can be used as home gateway, router and WLAN AP for residential, + enterprise and carrier applications. + +maintainers: + - William Zhang <william.zhang@broadcom.com> + - Anand Gore <anand.gore@broadcom.com> + - Kursad Oney <kursad.oney@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM47622 based boards + items: + - enum: + - brcm,bcm947622 + - const: brcm,bcm47622 + - const: brcm,bcmbca + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt deleted file mode 100644 index 10a91cc8b997..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt +++ /dev/null @@ -1,19 +0,0 @@ -Freescale DCFG - -DCFG is the device configuration unit, that provides general purpose -configuration and status for the device. Such as setting the secondary -core start address and release the secondary core from holdoff and startup. - -Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-dcfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a, lx2160a - - - reg : should contain base address and length of DCFG memory-mapped registers - -Example: - dcfg: dcfg@1ee0000 { - compatible = "fsl,ls1021a-dcfg"; - reg = <0x0 0x1ee0000 0x0 0x10000>; - }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt deleted file mode 100644 index 0ab67b0b216d..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt +++ /dev/null @@ -1,19 +0,0 @@ -Freescale SCFG - -SCFG is the supplemental configuration unit, that provides SoC specific -configuration and status registers for the chip. Such as getting PEX port -status. - -Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-scfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg: should contain base address and length of SCFG memory-mapped registers - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg"; - reg = <0x0 0x1570000 0x0 0x10000>; - }; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 08bdd30e511c..ef524378d449 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -172,7 +172,7 @@ properties: - karo,tx53 # Ka-Ro electronics TX53 module - kiebackpeter,imx53-ddc # K+P imx53 DDC - kiebackpeter,imx53-hsc # K+P imx53 HSC - - menlo,m53menlo + - menlo,m53menlo # i.MX53 Menlo board - voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668 - const: fsl,imx53 @@ -192,6 +192,7 @@ properties: items: - enum: - auvidea,h100 # Auvidea H100 + - bosch,imx6q-acc # Bosch ACC i.MX6 Dual - boundary,imx6q-nitrogen6_max - boundary,imx6q-nitrogen6_som2 - boundary,imx6q-nitrogen6x @@ -411,7 +412,6 @@ properties: - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Modules - - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board - vdl,lanmcu # Van der Laan LANMCU board - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board @@ -488,17 +488,13 @@ properties: - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules items: - enum: + - toradex,colibri_imx6dl-aster # Colibri iMX6DL/S Module on Aster Board - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3 + - toradex,colibri_imx6dl-iris # Colibri iMX6DL/S Module on Iris Board + - toradex,colibri_imx6dl-iris-v2 # Colibri iMX6DL/S Module on Iris Board V2 - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module - const: fsl,imx6dl - - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules - items: - - enum: - - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3 - - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module - - const: fsl,imx6dl - - description: i.MX6S DHCOM DRC02 Board items: - const: dh,imx6s-dhcom-drc02 @@ -613,6 +609,28 @@ properties: - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul + - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board + items: + - enum: + - tq,imx6ul-tqma6ul1-mba6ulx + - const: tq,imx6ul-tqma6ul1 # MCIMX6G1 + - const: fsl,imx6ul + + - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board + items: + - enum: + - tq,imx6ul-tqma6ul2-mba6ulx + - const: tq,imx6ul-tqma6ul2 # MCIMX6G2 + - const: fsl,imx6ul + + - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board + items: + - enum: + - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter + - tq,imx6ul-tqma6ul2l-mba6ulxl + - const: tq,imx6ul-tqma6ul2l # MCIMX6G2, LGA SoM variant + - const: fsl,imx6ul + - description: i.MX6ULL based Boards items: - enum: @@ -640,26 +658,44 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyGATE-Tauri + items: + - enum: + - phytec,imx6ull-phygate-tauri-emmc + - phytec,imx6ull-phygate-tauri-nand + - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL + - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL + - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules items: - enum: - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3 + - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board + - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module - - const: fsl,imx6dl + - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module items: - enum: - - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board - - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module - - const: fsl,imx6dl + - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board + - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3 + - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board + - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board + - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules items: - enum: - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board - - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module - - const: fsl,imx6dl + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3 + - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board + - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board + - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board + - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module + - const: fsl,imx6ull - description: Kontron N6411 S Board items: @@ -667,6 +703,21 @@ properties: - const: kontron,imx6ull-n6411-som - const: fsl,imx6ull + - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board + items: + - enum: + - tq,imx6ull-tqma6ull2-mba6ulx + - const: tq,imx6ull-tqma6ull2 # MCIMX6Y2 + - const: fsl,imx6ull + + - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board + items: + - enum: + - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter + - tq,imx6ull-tqma6ull2l-mba6ulxl + - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum: @@ -707,6 +758,7 @@ properties: - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet + - storopack,imx7d-smegw01 # Storopack i.MX7D SMEGW01 - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph @@ -762,6 +814,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board + - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board @@ -772,6 +825,7 @@ properties: - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM + - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules - toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT - toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules @@ -834,6 +888,7 @@ properties: - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit - bsh,imx8mn-bsh-smm-s2 # i.MX8MN BSH SystemMaster S2 - bsh,imx8mn-bsh-smm-s2pro # i.MX8MN BSH SystemMaster S2 PRO + - fsl,imx8mn-ddr3l-evk # i.MX8MN DDR3L EVK Board - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - gw,imx8mn-gw7902 # i.MX8MM Gateworks Board @@ -860,6 +915,17 @@ properties: items: - enum: - fsl,imx8mp-evk # i.MX8MP EVK Board + - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board + - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules + - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT + - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules + - const: fsl,imx8mp + + - description: Engicam i.Core MX8M Plus SoM based boards + items: + - enum: + - engicam,icore-mx8mp-edimm2.2 # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit + - const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM - const: fsl,imx8mp - description: PHYTEC phyCORE-i.MX8MP SoM based boards @@ -868,6 +934,24 @@ properties: - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM - const: fsl,imx8mp + - description: Toradex Boards with Verdin iMX8M Plus Modules + items: + - enum: + - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia + - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board + - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT + - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module + - const: fsl,imx8mp + + - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules + items: + - enum: + - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia + - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B. + - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module + - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -999,6 +1083,7 @@ properties: - description: LS1021A based Boards items: - enum: + - fsl,ls1021a-iot - fsl,ls1021a-moxa-uc-8410a - fsl,ls1021a-qds - fsl,ls1021a-tsn diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml index 7378159e61df..483caf0ce25b 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml @@ -17,14 +17,15 @@ properties: - const: hisilicon,hip04-bootwrapper boot-method: + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Address and size of boot method. [0]: bootwrapper physical address [1]: bootwrapper size [2]: relocation physical address [3]: relocation size - minItems: 1 - maxItems: 2 + minItems: 2 + maxItems: 4 required: - compatible diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index ab0593c77321..4a2bd9759c47 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -133,6 +133,11 @@ properties: - const: mediatek,mt8183 - items: - enum: + - mediatek,mt8192-evb + - const: mediatek,mt8192 + - items: + - enum: + - mediatek,mt8195-demo - mediatek,mt8195-evb - const: mediatek,mt8195 - description: Google Burnet (HP Chromebook x360 11MK G3 EE) diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt deleted file mode 100644 index 3fa755866528..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek apmixedsys controller -============================== - -The Mediatek apmixedsys controller provides the PLLs to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-apmixedsys" - - "mediatek,mt2712-apmixedsys", "syscon" - - "mediatek,mt6765-apmixedsys", "syscon" - - "mediatek,mt6779-apmixedsys", "syscon" - - "mediatek,mt6797-apmixedsys" - - "mediatek,mt7622-apmixedsys" - - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" - - "mediatek,mt7629-apmixedsys" - - "mediatek,mt7986-apmixedsys" - - "mediatek,mt8135-apmixedsys" - - "mediatek,mt8167-apmixedsys", "syscon" - - "mediatek,mt8173-apmixedsys" - - "mediatek,mt8183-apmixedsys", "syscon" - - "mediatek,mt8516-apmixedsys" -- #clock-cells: Must be 1 - -The apmixedsys controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -apmixedsys: clock-controller@10209000 { - compatible = "mediatek,mt8173-apmixedsys"; - reg = <0 0x10209000 0 0x1000>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt deleted file mode 100644 index f66bd720571d..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ /dev/null @@ -1,42 +0,0 @@ -Mediatek infracfg controller -============================ - -The Mediatek infracfg controller provides various clocks and reset -outputs to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-infracfg", "syscon" - - "mediatek,mt2712-infracfg", "syscon" - - "mediatek,mt6765-infracfg", "syscon" - - "mediatek,mt6779-infracfg_ao", "syscon" - - "mediatek,mt6797-infracfg", "syscon" - - "mediatek,mt7622-infracfg", "syscon" - - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" - - "mediatek,mt7629-infracfg", "syscon" - - "mediatek,mt7986-infracfg", "syscon" - - "mediatek,mt8135-infracfg", "syscon" - - "mediatek,mt8167-infracfg", "syscon" - - "mediatek,mt8173-infracfg", "syscon" - - "mediatek,mt8183-infracfg", "syscon" - - "mediatek,mt8516-infracfg", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The infracfg controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. -Also it uses the common reset controller binding from -Documentation/devicetree/bindings/reset/reset.txt. -The available reset outputs are defined in -dt-bindings/reset/mt*-resets.h - -Example: - -infracfg: power-controller@10001000 { - compatible = "mediatek,mt8173-infracfg", "syscon"; - reg = <0 0x10001000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml new file mode 100644 index 000000000000..8681b785ed6d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Infrastructure System Configuration Controller + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + The Mediatek infracfg controller provides various clocks and reset outputs + to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>, + and reset values in <dt-bindings/reset/mt*-reset.h> and + <dt-bindings/reset/mt*-resets.h>. + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-infracfg + - mediatek,mt2712-infracfg + - mediatek,mt6765-infracfg + - mediatek,mt6779-infracfg_ao + - mediatek,mt6797-infracfg + - mediatek,mt7622-infracfg + - mediatek,mt7629-infracfg + - mediatek,mt7986-infracfg + - mediatek,mt8135-infracfg + - mediatek,mt8167-infracfg + - mediatek,mt8173-infracfg + - mediatek,mt8183-infracfg + - mediatek,mt8516-infracfg + - const: syscon + - items: + - const: mediatek,mt7623-infracfg + - const: mediatek,mt2701-infracfg + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-infracfg + - mediatek,mt2712-infracfg + - mediatek,mt7622-infracfg + - mediatek,mt7986-infracfg + - mediatek,mt8135-infracfg + - mediatek,mt8173-infracfg + - mediatek,mt8183-infracfg +then: + required: + - '#reset-cells' + +additionalProperties: false + +examples: + - | + infracfg: clock-controller@10001000 { + compatible = "mediatek,mt8173-infracfg", "syscon"; + reg = <0x10001000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index b31d90dc9eb4..6ad023eec193 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -31,6 +31,7 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8192-mmsys + - mediatek,mt8195-mmsys - mediatek,mt8365-mmsys - const: syscon - items: @@ -41,6 +42,30 @@ properties: reg: maxItems: 1 + power-domains: + description: + A phandle and PM domain specifier as defined by bindings + of the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + mboxes: + description: + Using mailbox to communicate with GCE, it should have this + property and list of phandle, mailbox specifiers. See + Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details. + $ref: /schemas/types.yaml#/definitions/phandle-array + + mediatek,gce-client-reg: + description: + The register of client driver can be configured by gce with 4 arguments + defined in this property, such as phandle of gce, subsys id, + register offset and size. + Each subsys id is mapping to a base address of display function blocks + register which is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + "#clock-cells": const: 1 @@ -56,9 +81,16 @@ additionalProperties: false examples: - | + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + mmsys: syscon@14000000 { compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0x14000000 0x1000>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; #clock-cells = <1>; #reset-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml new file mode 100644 index 000000000000..9fbeb626ab23 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek PCIE Mirror Controller for MT7622 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The mediatek PCIE mirror provides a configuration interface for PCIE + controller on MT7622 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-pcie-mirror + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie_mirror: pcie-mirror@10000400 { + compatible = "mediatek,mt7622-pcie-mirror", "syscon"; + reg = <0 0x10000400 0 0x10>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml new file mode 100644 index 000000000000..787d6673f952 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Wireless Ethernet Dispatch Controller for MT7622 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The mediatek wireless ethernet dispatch controller can be configured to + intercept and handle access to the WLAN DMA queues and PCIe interrupts + and implement hardware flow offloading from ethernet to WLAN. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-wed + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + wed0: wed@1020a000 { + compatible = "mediatek,mt7622-wed","syscon"; + reg = <0 0x1020a000 0 0x1000>; + interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml new file mode 100644 index 000000000000..cf1002c3efa6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Functional Clock Controller for MT8186 + +maintainers: + - Chun-Jie Chen <chun-jie.chen@mediatek.com> + +description: | + The clock architecture in MediaTek like below + PLLs --> + dividers --> + muxes + --> + clock gate + + The devices provide clock gate control in different IP blocks. + +properties: + compatible: + items: + - enum: + - mediatek,mt8186-imp_iic_wrap + - mediatek,mt8186-mfgsys + - mediatek,mt8186-wpesys + - mediatek,mt8186-imgsys1 + - mediatek,mt8186-imgsys2 + - mediatek,mt8186-vdecsys + - mediatek,mt8186-vencsys + - mediatek,mt8186-camsys + - mediatek,mt8186-camsys_rawa + - mediatek,mt8186-camsys_rawb + - mediatek,mt8186-mdpsys + - mediatek,mt8186-ipesys + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + imp_iic_wrap: clock-controller@11017000 { + compatible = "mediatek,mt8186-imp_iic_wrap"; + reg = <0x11017000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml new file mode 100644 index 000000000000..0886e2e335bb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek System Clock Controller for MT8186 + +maintainers: + - Chun-Jie Chen <chun-jie.chen@mediatek.com> + +description: | + The clock architecture in MediaTek like below + PLLs --> + dividers --> + muxes + --> + clock gate + + The apmixedsys provides most of PLLs which generated from SoC 26m. + The topckgen provides dividers and muxes which provide the clock source to other IP blocks. + The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks. + The mcusys provides mux control to select the clock source in AP MCU. + The device nodes also provide the system control capacity for configuration. + +properties: + compatible: + items: + - enum: + - mediatek,mt8186-mcusys + - mediatek,mt8186-topckgen + - mediatek,mt8186-infracfg_ao + - mediatek,mt8186-apmixedsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + topckgen: syscon@10000000 { + compatible = "mediatek,mt8186-topckgen", "syscon"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 8723dfe34bab..611f666f359d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8135-pericfg - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg + - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt deleted file mode 100644 index b82422bb717f..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek topckgen controller -============================ - -The Mediatek topckgen controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-topckgen" - - "mediatek,mt2712-topckgen", "syscon" - - "mediatek,mt6765-topckgen", "syscon" - - "mediatek,mt6779-topckgen", "syscon" - - "mediatek,mt6797-topckgen" - - "mediatek,mt7622-topckgen" - - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" - - "mediatek,mt7629-topckgen" - - "mediatek,mt7986-topckgen", "syscon" - - "mediatek,mt8135-topckgen" - - "mediatek,mt8167-topckgen", "syscon" - - "mediatek,mt8173-topckgen" - - "mediatek,mt8183-topckgen", "syscon" - - "mediatek,mt8516-topckgen" -- #clock-cells: Must be 1 - -The topckgen controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -topckgen: power-controller@10000000 { - compatible = "mediatek,mt8173-topckgen"; - reg = <0 0x10000000 0 0x1000>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 30fcbe2ad8a3..5ea506412b4e 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -23,6 +23,8 @@ properties: enum: - qcom,sc7180-llcc - qcom,sc7280-llcc + - qcom,sc8180x-llcc + - qcom,sc8280xp-llcc - qcom,sdm845-llcc - qcom,sm6350-llcc - qcom,sm8150-llcc diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt index 3eb6d7afff14..431ef8c56a13 100644 --- a/Documentation/devicetree/bindings/arm/omap/prcm.txt +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt @@ -31,12 +31,17 @@ Required properties: (base address and length) - clocks: clocks for this module - clockdomains: clockdomains for this module +- #clock-cells: From common clock binding +- clock-output-names: From common clock binding + Example: -cm: cm@48004000 { +cm: clock@48004000 { compatible = "ti,omap3-cm"; reg = <0x48004000 0x4000>; + #clock-cells = <0>; + clock-output-names = "cm"; cm_clocks: clocks { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 129cdd246223..5c06d1bfc046 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -39,8 +39,11 @@ description: | msm8994 msm8996 sa8155p + sa8540p sc7180 sc7280 + sc8180x + sc8280xp sdm630 sdm632 sdm660 @@ -99,6 +102,7 @@ properties: - items: - enum: + - asus,sparrow - lg,lenok - const: qcom,apq8026 @@ -227,6 +231,18 @@ properties: - items: - enum: + - lenovo,flex-5g + - microsoft,surface-prox + - qcom,sc8180x-primus + - const: qcom,sc8180x + + - items: + - enum: + - qcom,sc8280xp-qrd + - const: qcom,sc8280xp + + - items: + - enum: - fairphone,fp3 - const: qcom,sdm632 @@ -260,6 +276,11 @@ properties: - items: - enum: + - qcom,sa8295p-adp + - const: qcom,sa8540p + + - items: + - enum: - fairphone,fp4 - const: qcom,sm7225 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index fa435d6fda77..ff80152f092f 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -327,6 +327,18 @@ properties: - const: renesas,spider-cpu - const: renesas,r8a779f0 + - description: R-Car V4H (R8A779G0) + items: + - enum: + - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) + - const: renesas,r8a779g0 + + - items: + - enum: + - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) + - const: renesas,white-hawk-cpu + - const: renesas,r8a779g0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -406,6 +418,8 @@ properties: - description: RZ/G2UL (R9A07G043) items: - enum: + - renesas,smarc-evk # SMARC EVK + - enum: - renesas,r9a07g043u11 # RZ/G2UL Type-1 - renesas,r9a07g043u12 # RZ/G2UL Type-2 - const: renesas,r9a07g043 @@ -430,6 +444,12 @@ properties: - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L - const: renesas,r9a07g054 + - description: RZ/V2M (R9A09G011) + items: + - enum: + - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 + - const: renesas,r9a09g011 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index eece92f83a2d..cf9eb1e8326a 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -133,6 +133,11 @@ properties: - firefly,roc-rk3399-pc-plus - const: rockchip,rk3399 + - description: Firefly Station M2 + items: + - const: firefly,rk3566-roc-pc + - const: rockchip,rk3566 + - description: FriendlyElec NanoPi R2S items: - const: friendlyarm,nanopi-r2s @@ -502,9 +507,18 @@ properties: - const: pine64,rockpro64 - const: rockchip,rk3399 - - description: Pine64 Quartz64 Model A + - description: Pine64 Quartz64 Model A/B items: - - const: pine64,quartz64-a + - enum: + - pine64,quartz64-a + - pine64,quartz64-b + - const: rockchip,rk3566 + + - description: Pine64 SoQuartz SoM + items: + - enum: + - pine64,soquartz-cm4io + - const: pine64,soquartz - const: rockchip,rk3566 - description: Radxa Rock @@ -545,6 +559,11 @@ properties: - const: radxa,rock2-square - const: rockchip,rk3288 + - description: Radxa ROCK3 Model A + items: + - const: radxa,rock3a + - const: rockchip,rk3568 + - description: Rikomagic MK808 v1 items: - const: rikomagic,mk808 diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt deleted file mode 100644 index 46652bf65147..000000000000 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ /dev/null @@ -1,46 +0,0 @@ -SP810 System Controller ------------------------ - -Required properties: - -- compatible: standard compatible string for a Primecell peripheral, - see Documentation/devicetree/bindings/arm/primecell.yaml - for more details - should be: "arm,sp810", "arm,primecell" - -- reg: standard registers property, physical address and size - of the control registers - -- clock-names: from the common clock bindings, for more details see - Documentation/devicetree/bindings/clock/clock-bindings.txt; - should be: "refclk", "timclk", "apb_pclk" - -- clocks: from the common clock bindings, phandle and clock - specifier pairs for the entries of clock-names property - -- #clock-cells: from the common clock bindings; - should be: <1> - -- clock-output-names: from the common clock bindings; - should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3" - -- assigned-clocks: from the common clock binding; - should be: clock specifier for each output clock of this - provider node - -- assigned-clock-parents: from the common clock binding; - should be: phandle of input clock listed in clocks - property with the highest frequency - -Example: - v2m_sysctl: sysctl@20000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; - - }; diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml new file mode 100644 index 000000000000..bc8e524aa90a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sp810.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sp810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express SP810 System Controller bindings + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm SP810 system controller provides clocks, timers and a watchdog. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,sp810 + required: + - compatible + +properties: + compatible: + items: + - const: arm,sp810 + - const: arm,primecell + + reg: + maxItems: 1 + + clock-names: + items: + - const: refclk + - const: timclk + - const: apb_pclk + + clocks: + items: + - description: reference clock + - description: timer clock + - description: APB register access clock + + "#clock-cells": + const: 1 + + clock-output-names: + maxItems: 4 + + assigned-clocks: + maxItems: 4 + + assigned-clock-parents: + maxItems: 4 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +examples: + - | + sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", + "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, + <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, + <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt deleted file mode 100644 index 93372f2a7df9..000000000000 --- a/Documentation/devicetree/bindings/arm/spe-pmu.txt +++ /dev/null @@ -1,20 +0,0 @@ -* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) - -ARMv8.2 introduces the optional Statistical Profiling Extension for collecting -performance sample data using an in-memory trace buffer. - -** SPE Required properties: - -- compatible : should be one of: - "arm,statistical-profiling-extension-v1" - -- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where - SPE is only supported on a subset of the CPUs, please consult - the arm,gic-v3 binding for details on describing a PPI partition. - -** Example: - -spe-pmu { - compatible = "arm,statistical-profiling-extension-v1"; - interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>; -}; diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index fa0a1b84122e..8b31565fee59 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -14,21 +14,6 @@ properties: const: "/" compatible: oneOf: - - description: DH STM32MP1 SoM based Boards - items: - - enum: - - arrow,stm32mp157a-avenger96 # Avenger96 - - dh,stm32mp153c-dhcom-drc02 - - dh,stm32mp157c-dhcom-pdk2 - - dh,stm32mp157c-dhcom-picoitx - - enum: - - dh,stm32mp153c-dhcom-som - - dh,stm32mp157a-dhcor-som - - dh,stm32mp157c-dhcom-som - - enum: - - st,stm32mp153 - - st,stm32mp157 - - description: emtrion STM32MP1 Argon based Boards items: - const: emtrion,stm32mp157c-emsbc-argon @@ -65,6 +50,21 @@ properties: - enum: - st,stm32mp135f-dk - const: st,stm32mp135 + + - description: ST STM32MP151 based Boards + items: + - enum: + - prt,prtt1a # Protonic PRTT1A + - prt,prtt1c # Protonic PRTT1C + - prt,prtt1s # Protonic PRTT1S + - const: st,stm32mp151 + + - description: DH STM32MP153 SoM based Boards + items: + - const: dh,stm32mp153c-dhcom-drc02 + - const: dh,stm32mp153c-dhcom-som + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box @@ -72,13 +72,45 @@ properties: - st,stm32mp157c-ed1 - st,stm32mp157a-dk1 - st,stm32mp157c-dk2 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157a-dk1-scmi + - const: st,stm32mp157a-dk1 - const: st,stm32mp157 - items: + - const: st,stm32mp157c-dk2-scmi + - const: st,stm32mp157c-dk2 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ed1-scmi + - const: st,stm32mp157c-ed1 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ev1 + - const: st,stm32mp157c-ed1 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ev1-scmi - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - const: dh,stm32mp157a-dhcor-som + - const: st,stm32mp157 + + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - dh,stm32mp157c-dhcom-pdk2 + - dh,stm32mp157c-dhcom-picoitx + - const: dh,stm32mp157c-dhcom-som + - const: st,stm32mp157 + - description: Engicam i.Core STM32MP1 SoM based Boards items: - enum: @@ -103,6 +135,7 @@ properties: - const: oct,stm32mp15xx-osd32 - enum: - st,stm32mp157 + - description: Odyssey STM32MP1 SoM based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 086c68771d2b..95278a6a9a8e 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -391,6 +391,11 @@ properties: - const: libretech,all-h5-cc-h5 - const: allwinner,sun50i-h5 + - description: Lichee Pi Nano + items: + - const: licheepi,licheepi-nano + - const: allwinner,suniv-f1c100s + - description: Lichee Pi One items: - const: licheepi,licheepi-one diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt index d8b48f2edf1b..851f48ead927 100644 --- a/Documentation/devicetree/bindings/arm/syna.txt +++ b/Documentation/devicetree/bindings/arm/syna.txt @@ -18,10 +18,6 @@ stable binding/ABI. --------------------------------------------------------------- -Boards with the Synaptics AS370 SoC shall have the following properties: - Required root node property: - compatible: "syna,as370" - Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml index a46193ad94e0..17accb31bca0 100644 --- a/Documentation/devicetree/bindings/arm/ux500.yaml +++ b/Documentation/devicetree/bindings/arm/ux500.yaml @@ -40,6 +40,11 @@ properties: - const: samsung,codina - const: st-ericsson,u8500 + - description: Samsung Galaxy Exhibit (SGH-T599) + items: + - const: samsung,codina-tmo + - const: st-ericsson,u8500 + - description: Samsung Galaxy Beam (GT-I8530) items: - const: samsung,gavini diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml new file mode 100644 index 000000000000..09e1adf5ca7a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml @@ -0,0 +1,285 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vexpress-config.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express configuration bus bindings + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +description: + This is a system control register block, acting as a bridge to the + platform's configuration bus via "system control" interface, addressing + devices with site number, position in the board stack, config controller, + function and device numbers - see motherboard's TRM for more details. + +properties: + compatible: + const: arm,vexpress,config-bus + + arm,vexpress,config-bridge: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the sysreg node. + + muxfpga: + type: object + properties: + compatible: + const: arm,vexpress-muxfpga + + arm,vexpress-sysreg,func: + description: FPGA specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 7 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + shutdown: + type: object + properties: + compatible: + const: arm,vexpress-shutdown + + arm,vexpress-sysreg,func: + description: shutdown identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 8 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + reboot: + type: object + properties: + compatible: + const: arm,vexpress-reboot + + arm,vexpress-sysreg,func: + description: reboot identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 9 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + dvimode: + type: object + properties: + compatible: + const: arm,vexpress-dvimode + + arm,vexpress-sysreg,func: + description: DVI mode identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 11 + - description: device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + +additionalProperties: false + +required: + - compatible + - arm,vexpress,config-bridge + +patternProperties: + 'clk[0-9]*$': + type: object + description: + clocks + + properties: + compatible: + const: arm,vexpress-osc + + arm,vexpress-sysreg,func: + description: clock specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 1 + - description: clock number + + freq-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: minimal clock frequency + - description: maximum clock frequency + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + - "#clock-cells" + + "^volt-.+$": + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + const: arm,vexpress-volt + + arm,vexpress-sysreg,func: + description: regulator specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 2 + - description: device number + + label: + maxItems: 1 + + unevaluatedProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^amp-.+$": + type: object + properties: + compatible: + const: arm,vexpress-amp + + arm,vexpress-sysreg,func: + description: current sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 3 + - description: device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^temp-.+$": + type: object + properties: + compatible: + const: arm,vexpress-temp + + arm,vexpress-sysreg,func: + description: temperature sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 4 + - description: device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^reset[0-9]*$": + type: object + properties: + compatible: + const: arm,vexpress-reset + + arm,vexpress-sysreg,func: + description: reset specifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 5 + - description: reset device number + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^power-.+$": + type: object + properties: + compatible: + const: arm,vexpress-power + + arm,vexpress-sysreg,func: + description: power sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - const: 12 + - description: device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + + "^energy(-.+)?$": + type: object + properties: + compatible: + const: arm,vexpress-energy + + arm,vexpress-sysreg,func: + description: energy sensor identifier + $ref: /schemas/types.yaml#/definitions/uint32-array + oneOf: + - items: + - const: 13 + - description: device number + - items: + - const: 13 + - description: device number + - const: 13 + - description: second device number + + label: + maxItems: 1 + + additionalProperties: false + required: + - compatible + - arm,vexpress-sysreg,func + +examples: + - | + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + clk0 { + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + #clock-cells = <0>; + }; + + energy { + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>, <13 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt deleted file mode 100644 index 50095802fb4a..000000000000 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ /dev/null @@ -1,103 +0,0 @@ -ARM Versatile Express system registers --------------------------------------- - -This is a system control registers block, providing multiple low level -platform functions like board detection and identification, software -interrupt generation, MMC and NOR Flash control etc. - -Required node properties: -- compatible value : = "arm,vexpress,sysreg"; -- reg : physical base address and the size of the registers window - -Deprecated properties, replaced by GPIO subnodes (see below): -- gpio-controller : specifies that the node is a GPIO controller -- #gpio-cells : size of the GPIO specifier, should be 2: - - first cell is the pseudo-GPIO line number: - 0 - MMC CARDIN - 1 - MMC WPROT - 2 - NOR FLASH WPn - - second cell can take standard GPIO flags (currently ignored). - -Control registers providing pseudo-GPIO lines must be represented -by subnodes, each of them requiring the following properties: -- compatible value : one of - "arm,vexpress-sysreg,sys_led" - "arm,vexpress-sysreg,sys_mci" - "arm,vexpress-sysreg,sys_flash" -- gpio-controller : makes the node a GPIO controller -- #gpio-cells : size of the GPIO specifier, must be 2: - - first cell is the function number: - - for sys_led : 0..7 = LED 0..7 - - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT - - for sys_flash : 0 = NOR FLASH WPn - - second cell can take standard GPIO flags (currently ignored). - -Example: - v2m_sysreg: sysreg@10000000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x10000000 0x1000>; - - v2m_led_gpios: sys_led@8 { - compatible = "arm,vexpress-sysreg,sys_led"; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_mmc_gpios: sys_mci@48 { - compatible = "arm,vexpress-sysreg,sys_mci"; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_flash_gpios: sys_flash@4c { - compatible = "arm,vexpress-sysreg,sys_flash"; - gpio-controller; - #gpio-cells = <2>; - }; - }; - -This block also can also act a bridge to the platform's configuration -bus via "system control" interface, addressing devices with site number, -position in the board stack, config controller, function and device -numbers - see motherboard's TRM for more details. All configuration -controller accessible via this interface must reference the sysreg -node via "arm,vexpress,config-bridge" phandle and define appropriate -topology properties - see main vexpress node documentation for more -details. Each child of such node describes one function and must -define the following properties: -- compatible value : must be one of (corresponding to the TRM): - "arm,vexpress-amp" - "arm,vexpress-dvimode" - "arm,vexpress-energy" - "arm,vexpress-muxfpga" - "arm,vexpress-osc" - "arm,vexpress-power" - "arm,vexpress-reboot" - "arm,vexpress-reset" - "arm,vexpress-scc" - "arm,vexpress-shutdown" - "arm,vexpress-temp" - "arm,vexpress-volt" -- arm,vexpress-sysreg,func : must contain a set of two cells long groups: - - first cell of each group defines the function number - (eg. 1 for clock generator, 2 for voltage regulators etc.) - - second cell of each group defines device number (eg. osc 0, - osc 1 etc.) - - some functions (eg. energy meter, with its 64 bit long counter) - are using more than one function/device number pair - -Example: - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - osc@0 { - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - }; - - energy@0 { - compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>, <13 1>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml new file mode 100644 index 000000000000..b5e26e41f88c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express system registers bindings + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +description: + This is a system control registers block, providing multiple low level + platform functions like board detection and identification, software + interrupt generation, MMC and NOR Flash control, etc. + +properties: + compatible: + const: arm,vexpress-sysreg + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +additionalProperties: false + +patternProperties: + '^gpio@[0-9a-f]+$': + type: object + additionalProperties: false + description: + GPIO children + + properties: + compatible: + enum: + - arm,vexpress-sysreg,sys_led + - arm,vexpress-sysreg,sys_mci + - arm,vexpress-sysreg,sys_flash + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the function number: + for sys_led : 0..7 = LED 0..7 + for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT + for sys_flash : 0 = NOR FLASH WPn + The second cell can take standard GPIO flags. + + reg: + maxItems: 1 + + required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +examples: + - | + sysreg@0 { + compatible = "arm,vexpress-sysreg"; + reg = <0x00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + v2m_led_gpios: gpio@8 { + compatible = "arm,vexpress-sysreg,sys_led"; + reg = <0x008 4>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml new file mode 100644 index 000000000000..5b9705079015 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +description: | + This binding describes the dependencies (clocks, resets, power domains) which + need to be turned on in a sequence before communication over the AHB bus + becomes possible. + + Additionally, the reg property is used to pass to the driver the location of + two sadly undocumented registers which need to be poked as part of the sequence. + + The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart + controllers, a hexagon core, and a clock controller which provides clocks for + the above. + +properties: + compatible: + items: + - const: qcom,msm8998-ssc-block-bus + - const: qcom,ssc-block-bus + + reg: + description: | + Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1 + registers + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: mpm_sscaon_config0 + - const: mpm_sscaon_config1 + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: xo + - const: aggre2 + - const: gcc_im_sleep + - const: aggre2_north + - const: ssc_xo + - const: ssc_ahbs + + power-domains: + description: Power domain phandles for the ssc_cx and ssc_mx power domains + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: ssc_cx + - const: ssc_mx + + resets: + description: | + Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the + branch control register associated with the ssc_xo and ssc_ahbs clocks) + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ssc_reset + - const: ssc_bcr + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: describes how to locate the ssc AXI halt register + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offset for the ssc AXI halt register + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; + ssc_ahb_slave: bus@10ac008 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; + + clocks = <&xo>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_IM_SLEEP>, + <&gcc AGGRE2_SNOC_NORTH_AXI>, + <&gcc SSC_XO>, + <&gcc SSC_CNOC_AHBS_CLK>; + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; + + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; + reset-names = "ssc_reset", "ssc_bcr"; + + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; + power-domain-names = "ssc_cx", "ssc_mx"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml new file mode 100644 index 000000000000..d60e74654809 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EN7523 Clock Device Tree Bindings + +maintainers: + - Felix Fietkau <nbd@nbd.name> + - John Crispin <nbd@nbd.name> + +description: | + This node defines the System Control Unit of the EN7523 SoC, + a collection of registers configuring many different aspects of the SoC. + + The clock driver uses it to read and configure settings of the + PLL controller, which provides clocks for the CPU, the bus and + other SoC internal peripherals. + + Each clock is assigned an identifier and client nodes use this identifier + to specify which clock they consume. + + All these identifiers can be found in: + [1]: <include/dt-bindings/clock/en7523-clk.h>. + + The clocks are provided inside a system controller node. + +properties: + compatible: + items: + - const: airoha,en7523-scu + + reg: + maxItems: 2 + + "#clock-cells": + description: + The first cell indicates the clock number, see [1] for available + clocks. + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/en7523-clk.h> + scu: system-controller@1fa20000 { + compatible = "airoha,en7523-scu"; + reg = <0x1fa20000 0x400>, + <0x1fb00000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index f2ea53832ac6..6fe541368889 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -1,186 +1,2 @@ -This binding is a work-in-progress, and are based on some experimental -work by benh[1]. - -Sources of clock signal can be represented by any node in the device -tree. Those nodes are designated as clock providers. Clock consumer -nodes use a phandle and clock specifier pair to connect clock provider -outputs to clock inputs. Similar to the gpio specifiers, a clock -specifier is an array of zero, one or more cells identifying the clock -output on a device. The length of a clock specifier is defined by the -value of a #clock-cells property in the clock provider node. - -[1] https://patchwork.ozlabs.org/patch/31551/ - -==Clock providers== - -Required properties: -#clock-cells: Number of cells in a clock specifier; Typically 0 for nodes - with a single clock output and 1 for nodes with multiple - clock outputs. - -Optional properties: -clock-output-names: Recommended to be a list of strings of clock output signal - names indexed by the first cell in the clock specifier. - However, the meaning of clock-output-names is domain - specific to the clock provider, and is only provided to - encourage using the same meaning for the majority of clock - providers. This format may not work for clock providers - using a complex clock specifier format. In those cases it - is recommended to omit this property and create a binding - specific names property. - - Clock consumer nodes must never directly reference - the provider's clock-output-names property. - -For example: - - oscillator { - #clock-cells = <1>; - clock-output-names = "ckil", "ckih"; - }; - -- this node defines a device with two clock outputs, the first named - "ckil" and the second named "ckih". Consumer nodes always reference - clocks by index. The names should reflect the clock output signal - names for the device. - -clock-indices: If the identifying number for the clocks in the node - is not linear from zero, then this allows the mapping of - identifiers into the clock-output-names array. - -For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: - - oscillator { - compatible = "myclocktype"; - #clock-cells = <1>; - clock-indices = <1>, <3>; - clock-output-names = "clka", "clkb"; - } - - This ensures we do not have any empty strings in clock-output-names - - -==Clock consumers== - -Required properties: -clocks: List of phandle and clock specifier pairs, one pair - for each clock input to the device. Note: if the - clock provider specifies '0' for #clock-cells, then - only the phandle portion of the pair will appear. - -Optional properties: -clock-names: List of clock input name strings sorted in the same - order as the clocks property. Consumers drivers - will use clock-names to match clock input names - with clocks specifiers. -clock-ranges: Empty property indicating that child nodes can inherit named - clocks from this node. Useful for bus nodes to provide a - clock to their children. - -For example: - - device { - clocks = <&osc 1>, <&ref 0>; - clock-names = "baud", "register"; - }; - - -This represents a device with two clock inputs, named "baud" and "register". -The baud clock is connected to output 1 of the &osc device, and the register -clock is connected to output 0 of the &ref. - -==Example== - - /* external oscillator */ - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32678>; - clock-output-names = "osc"; - }; - - /* phase-locked-loop device, generates a higher frequency clock - * from the external oscillator reference */ - pll: pll@4c000 { - compatible = "vendor,some-pll-interface" - #clock-cells = <1>; - clocks = <&osc 0>; - clock-names = "ref"; - reg = <0x4c000 0x1000>; - clock-output-names = "pll", "pll-switched"; - }; - - /* UART, using the low frequency oscillator for the baud clock, - * and the high frequency switched PLL output for register - * clocking */ - uart@a000 { - compatible = "fsl,imx-uart"; - reg = <0xa000 0x1000>; - interrupts = <33>; - clocks = <&osc 0>, <&pll 1>; - clock-names = "baud", "register"; - }; - -This DT fragment defines three devices: an external oscillator to provide a -low-frequency reference clock, a PLL device to generate a higher frequency -clock signal, and a UART. - -* The oscillator is fixed-frequency, and provides one clock output, named "osc". -* The PLL is both a clock provider and a clock consumer. It uses the clock - signal generated by the external oscillator, and provides two output signals - ("pll" and "pll-switched"). -* The UART has its baud clock connected the external oscillator and its - register clock connected to the PLL clock (the "pll-switched" signal) - -==Assigned clock parents and rates== - -Some platforms may require initial configuration of default parent clocks -and clock frequencies. Such a configuration can be specified in a device tree -node through assigned-clocks, assigned-clock-parents and assigned-clock-rates -properties. The assigned-clock-parents property should contain a list of parent -clocks in the form of a phandle and clock specifier pair and the -assigned-clock-rates property should contain a list of frequencies in Hz. Both -these properties should correspond to the clocks listed in the assigned-clocks -property. - -To skip setting parent or rate of a clock its corresponding entry should be -set to 0, or can be omitted if it is not followed by any non-zero entry. - - uart@a000 { - compatible = "fsl,imx-uart"; - reg = <0xa000 0x1000>; - ... - clocks = <&osc 0>, <&pll 1>; - clock-names = "baud", "register"; - - assigned-clocks = <&clkcon 0>, <&pll 2>; - assigned-clock-parents = <&pll 2>; - assigned-clock-rates = <0>, <460800>; - }; - -In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and -the <&pll 2> clock is assigned a frequency value of 460800 Hz. - -Configuring a clock's parent and rate through the device node that consumes -the clock can be done only for clocks that have a single user. Specifying -conflicting parent or rate configuration in multiple consumer nodes for -a shared clock is forbidden. - -Configuration of common clocks, which affect multiple consumer devices can -be similarly specified in the clock provider node. - -==Protected clocks== - -Some platforms or firmwares may not fully expose all the clocks to the OS, such -as in situations where those clks are used by drivers running in ARM secure -execution levels. Such a configuration can be specified in device tree with the -protected-clocks property in the form of a clock specifier list. This property should -only be specified in the node that is providing the clocks being protected: - - clock-controller@a000f000 { - compatible = "vendor,clk95; - reg = <0xa000f000 0x1000> - #clocks-cells = <1>; - ... - protected-clocks = <UART3_CLK>, <SPI5_CLK>; - }; +This file has moved to the clock binding schema: +https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml new file mode 100644 index 000000000000..770546195fb5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek AP Mixedsys Controller + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +description: + The Mediatek apmixedsys controller provides PLLs to the system. + The clock values can be found in <dt-bindings/clock/mt*-clk.h>. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-apmixedsys + - mediatek,mt7622-apmixedsys + - mediatek,mt7986-apmixedsys + - mediatek,mt8135-apmixedsys + - mediatek,mt8173-apmixedsys + - mediatek,mt8516-apmixedsys + - items: + - const: mediatek,mt7623-apmixedsys + - const: mediatek,mt2701-apmixedsys + - const: syscon + - items: + - enum: + - mediatek,mt2701-apmixedsys + - mediatek,mt2712-apmixedsys + - mediatek,mt6765-apmixedsys + - mediatek,mt6779-apmixedsys + - mediatek,mt7629-apmixedsys + - mediatek,mt8167-apmixedsys + - mediatek,mt8183-apmixedsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt8173-apmixedsys"; + reg = <0x10209000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml new file mode 100644 index 000000000000..5b8b37a2e594 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Top Clock Generator Controller + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +description: + The Mediatek topckgen controller provides various clocks to the system. + The clock values can be found in <dt-bindings/clock/mt*-clk.h>. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-topckgen + - mediatek,mt7622-topckgen + - mediatek,mt8135-topckgen + - mediatek,mt8173-topckgen + - mediatek,mt8516-topckgen + - items: + - const: mediatek,mt7623-topckgen + - const: mediatek,mt2701-topckgen + - const: syscon + - items: + - enum: + - mediatek,mt2701-topckgen + - mediatek,mt2712-topckgen + - mediatek,mt6765-topckgen + - mediatek,mt6779-topckgen + - mediatek,mt7629-topckgen + - mediatek,mt7986-topckgen + - mediatek,mt8167-topckgen + - mediatek,mt8183-topckgen + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt8173-topckgen"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 97936411b6b4..9fafcb080069 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -20,12 +20,10 @@ description: | See also: - dt-bindings/clock/qcom,gcc-msm8960.h - dt-bindings/reset/qcom,gcc-msm8960.h - - dt-bindings/clock/qcom,gcc-apq8084.h - - dt-bindings/reset/qcom,gcc-apq8084.h properties: compatible: - const: qcom,gcc-apq8084 + const: qcom,gcc-apq8064 nvmem-cells: minItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml new file mode 100644 index 000000000000..397fb918e032 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for APQ8084 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on APQ8084. + + See also:: + - dt-bindings/clock/qcom,gcc-apq8084.h + - dt-bindings/reset/qcom,gcc-apq8084.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + const: qcom,gcc-apq8084 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + reg = <0xfc400000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml new file mode 100644 index 000000000000..0bcdc69c6f89 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC8280xp. + + See also: + - include/dt-bindings/clock/qcom,gcc-sc8280xp.h + +properties: + compatible: + const: qcom,gcc-sc8280xp + + clocks: + items: + - description: XO reference clock + - description: Sleep clock + - description: UFS memory first RX symbol clock + - description: UFS memory second RX symbol clock + - description: UFS memory first TX symbol clock + - description: UFS card first RX symbol clock + - description: UFS card second RX symbol clock + - description: UFS card first TX symbol clock + - description: Primary USB SuperSpeed pipe clock + - description: USB4 PHY pipegmux clock source + - description: USB4 PHY DP gmux clock source + - description: USB4 PHY sys piegmux clock source + - description: USB4 PHY PCIe pipe clock + - description: USB4 PHY router max pipe clock + - description: Primary USB4 RX0 clock + - description: Primary USB4 RX1 clock + - description: Secondary USB SuperSpeed pipe clock + - description: Second USB4 PHY pipegmux clock source + - description: Second USB4 PHY DP gmux clock source + - description: Second USB4 PHY sys pipegmux clock source + - description: Second USB4 PHY PCIe pipe clock + - description: Second USB4 PHY router max pipe clock + - description: Secondary USB4 RX0 clock + - description: Secondary USB4 RX1 clock + - description: Multiport USB first SupserSpeed pipe clock + - description: Multiport USB second SuperSpeed pipe clock + - description: PCIe 2a pipe clock + - description: PCIe 2b pipe clock + - description: PCIe 3a pipe clock + - description: PCIe 3b pipe clock + - description: PCIe 4 pipe clock + - description: First EMAC controller reference clock + - description: Second EMAC controller reference clock + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + maxItems: 389 + +required: + - compatible + - clocks + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&ufs_phy_rx_symbol_0_clk>, + <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <&ufs_card_rx_symbol_0_clk>, + <&ufs_card_rx_symbol_1_clk>, + <&ufs_card_tx_symbol_0_clk>, + <&usb_0_ssphy>, + <&gcc_usb4_phy_pipegmux_clk_src>, + <&gcc_usb4_phy_dp_gmux_clk_src>, + <&gcc_usb4_phy_sys_pipegmux_clk_src>, + <&usb4_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_gcc_usb4_rx0_clk>, + <&qusb4phy_gcc_usb4_rx1_clk>, + <&usb_1_ssphy>, + <&gcc_usb4_1_phy_pipegmux_clk_src>, + <&gcc_usb4_1_phy_dp_gmux_clk_src>, + <&gcc_usb4_1_phy_sys_pipegmux_clk_src>, + <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_1_gcc_usb4_rx0_clk>, + <&qusb4phy_1_gcc_usb4_rx1_clk>, + <&usb_2_ssphy>, + <&usb_3_ssphy>, + <&pcie2a_lane>, + <&pcie2b_lane>, + <&pcie3a_lane>, + <&pcie3b_lane>, + <&pcie4_lane>, + <&rxc0_ref_clk>, + <&rxc1_ref_clk>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt deleted file mode 100644 index da295c3c004b..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ /dev/null @@ -1,63 +0,0 @@ -Qualcomm RPM Clock Controller Binding ------------------------------------------------- -The RPM is a dedicated hardware engine for managing the shared -SoC resources in order to keep the lowest power profile. It -communicates with other hardware subsystems via shared memory -and accepts clock requests, aggregates the requests and turns -the clocks on/off or scales them on demand. - -Required properties : -- compatible : shall contain only one of the following. The generic - compatible "qcom,rpmcc" should be also included. - - "qcom,rpmcc-mdm9607", "qcom,rpmcc" - "qcom,rpmcc-msm8660", "qcom,rpmcc" - "qcom,rpmcc-apq8060", "qcom,rpmcc" - "qcom,rpmcc-msm8226", "qcom,rpmcc" - "qcom,rpmcc-msm8916", "qcom,rpmcc" - "qcom,rpmcc-msm8936", "qcom,rpmcc" - "qcom,rpmcc-msm8953", "qcom,rpmcc" - "qcom,rpmcc-msm8974", "qcom,rpmcc" - "qcom,rpmcc-msm8976", "qcom,rpmcc" - "qcom,rpmcc-apq8064", "qcom,rpmcc" - "qcom,rpmcc-ipq806x", "qcom,rpmcc" - "qcom,rpmcc-msm8992",·"qcom,rpmcc" - "qcom,rpmcc-msm8994",·"qcom,rpmcc" - "qcom,rpmcc-msm8996", "qcom,rpmcc" - "qcom,rpmcc-msm8998", "qcom,rpmcc" - "qcom,rpmcc-qcm2290", "qcom,rpmcc" - "qcom,rpmcc-qcs404", "qcom,rpmcc" - "qcom,rpmcc-sdm660", "qcom,rpmcc" - "qcom,rpmcc-sm6115", "qcom,rpmcc" - "qcom,rpmcc-sm6125", "qcom,rpmcc" - -- #clock-cells : shall contain 1 - -The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> -and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock -is an "active" clock, which means that the consumer only care that the -clock is available when the apps CPU subsystem is active, i.e. not -suspended or in deep idle. If it is important that the clock keeps running -during system suspend, you need to specify the non-active clock, the one -not containing *_A_* in the enumerator name. - -Example: - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8916"; - qcom,smd-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; - #clock-cells = <1>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml new file mode 100644 index 000000000000..9d296b89a8d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM Clock Controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and + come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is + an "active" clock, which means that the consumer only care that the clock is + available when the apps CPU subsystem is active, i.e. not suspended or in + deep idle. If it is important that the clock keeps running during system + suspend, you need to specify the non-active clock, the one not containing + *_A_* in the enumerator name. + +properties: + compatible: + items: + - enum: + - qcom,rpmcc-apq8060 + - qcom,rpmcc-apq8064 + - qcom,rpmcc-ipq806x + - qcom,rpmcc-mdm9607 + - qcom,rpmcc-msm8226 + - qcom,rpmcc-msm8660 + - qcom,rpmcc-msm8916 + - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8953 + - qcom,rpmcc-msm8974 + - qcom,rpmcc-msm8976 + - qcom,rpmcc-msm8992 + - qcom,rpmcc-msm8994 + - qcom,rpmcc-msm8996 + - qcom,rpmcc-msm8998 + - qcom,rpmcc-qcm2290 + - qcom,rpmcc-qcs404 + - qcom,rpmcc-sdm660 + - qcom,rpmcc-sm6115 + - qcom,rpmcc-sm6125 + - const: qcom,rpmcc + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xo + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + rpm { + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml new file mode 100644 index 000000000000..bad9135489de --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core and audio clock control module which supports the + clocks and power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7280.h + - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h + +properties: + clocks: true + + clock-names: true + + compatible: + enum: + - qcom,sc7280-lpassaoncc + - qcom,sc7280-lpassaudiocc + - qcom,sc7280-lpasscorecc + - qcom,sc7280-lpasshm + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpassaudiocc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: lpass_aon_cc_main_rcg_clk_src + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpassaoncc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board XO active only source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: iface + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpasshm + - qcom,sc7280-lpasscorecc + + then: + properties: + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0x3300000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0x3c00000 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0x3900000 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0x3380000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao","iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml index e0b86214f0f5..e57bc40d307a 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -49,6 +49,7 @@ properties: - renesas,r8a77995-cpg-mssr # R-Car D3 - renesas,r8a779a0-cpg-mssr # R-Car V3U - renesas,r8a779f0-cpg-mssr # R-Car S4-8 + - renesas,r8a779g0-cpg-mssr # R-Car V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt deleted file mode 100644 index 399e0da22348..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Renesas H8/300 divider clock - -Required Properties: - - - compatible: Must be "renesas,h8300-div-clock" - - - clocks: Reference to the parent clocks ("extal1" and "extal2") - - - #clock-cells: Must be 1 - - - reg: Base address and length of the divide rate selector - - - renesas,width: bit width of selector - -Example -------- - - cclk: cclk { - compatible = "renesas,h8300-div-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee01b 2>; - renesas,width = <2>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt deleted file mode 100644 index 500cdadbceb7..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Renesas H8S2678 PLL clock - -This device is Clock multiplyer - -Required Properties: - - - compatible: Must be "renesas,h8s2678-pll-clock" - - - clocks: Reference to the parent clocks - - - #clock-cells: Must be 0 - - - reg: Two rate selector (Multiply / Divide) register address - -Example -------- - - pllclk: pllclk { - compatible = "renesas,h8s2678-pll-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee03b 2>, <0xfee045 2>; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml index 25dbb0fac065..95bf485c6cec 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -39,6 +39,17 @@ properties: '#power-domain-cells': const: 0 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-router@[a-f0-9]+$": + type: object + $ref: "../dma/renesas,rzn1-dmamux.yaml#" + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml index bd3af8fc616b..8880b834f264 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -4,14 +4,15 @@ $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode +title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> description: | - On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module - Standby Mode share the same register block. + On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. On RZ/V2M, the functionality is + similar, but does not have Clock Monitor Registers. They provide the following functionalities: - The CPG block generates various core clocks, @@ -23,8 +24,10 @@ description: | properties: compatible: enum: - - renesas,r9a07g044-cpg # RZ/G2{L,LC} - - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} + - renesas,r9a07g044-cpg # RZ/G2{L,LC} + - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a09g011-cpg # RZ/V2M reg: maxItems: 1 @@ -42,9 +45,10 @@ properties: description: | - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" and a core clock reference, as defined in - <dt-bindings/clock/r9a07g*-cpg.h> + <dt-bindings/clock/r9a0*-cpg.h> - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>. + a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h> or + <dt-bindings/clock/r9a09g011-cpg.h>. const: 2 '#power-domain-cells': @@ -58,7 +62,7 @@ properties: '#reset-cells': description: The single reset specifier cell must be the module number, as defined in - the <dt-bindings/clock/r9a07g0*-cpg.h>. + the <dt-bindings/clock/r9a07g0*-cpg.h> or <dt-bindings/clock/r9a09g011-cpg.h>. const: 1 required: diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt deleted file mode 100644 index 55e78cddec8c..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Rockchip PX30 Clock and Reset Unit - -The PX30 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: PMU for CRU should be "rockchip,px30-pmu-cru" -- compatible: CRU should be "rockchip,px30-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- clocks: A list of phandle + clock-specifier pairs for the clocks listed - in clock-names -- clock-names: Should contain the following: - - "xin24m" for both PMUCRU and CRU - - "gpll" for CRU (sourced from PMUCRU) -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "i2sx_clkin" - external I2S clock - optional, - - "gmac_clkin" - external GMAC clock - optional - -Example: Clock controller node: - - pmucru: clock-controller@ff2bc000 { - compatible = "rockchip,px30-pmucru"; - reg = <0x0 0xff2bc000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@ff2b0000 { - compatible = "rockchip,px30-cru"; - reg = <0x0 0xff2b0000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff030000 { - compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff030000 0x0 0x100>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>; - clock-names = "baudclk", "apb_pclk"; - reg-shift = <2>; - reg-io-width = <4>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml new file mode 100644 index 000000000000..3eec381c7cf5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PX30 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The PX30 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "i2sx_clkin" - external I2S clock - optional + - "gmac_clkin" - external GMAC clock - optional + +properties: + compatible: + enum: + - rockchip,px30-cru + - rockchip,px30-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 1 + items: + - description: Clock for both PMUCRU and CRU + - description: Clock for CRU (sourced from PMUCRU) + + clock-names: + minItems: 1 + items: + - const: xin24m + - const: gpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#reset-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,px30-cru + + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0xff2bc000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0xff2b0000 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt deleted file mode 100644 index 20df350b9ef3..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Rockchip RK3036 Clock and Reset Unit - -The RK3036 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3036-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "rmii_clkin" - external EMAC clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3036-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@20060000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20060000 0x100>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml new file mode 100644 index 000000000000..1376230fede6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3036 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3036 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "rmii_clkin" - external EMAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3036-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3036-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt deleted file mode 100644 index 7f368530a2e4..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3188/RK3066 Clock and Reset Unit - -The RK3188/RK3066 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or - "rockchip,rk3066a-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3188-cru.h and -dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. -Similar macros exist for the reset sources in these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "xin27m" - 27mhz crystal input on rk3066 - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_cif0" - external camera clock - optional, - - "ext_rmii" - external RMII clock - optional, - - "ext_jtag" - externalJTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file mode 100644 index 000000000000..ddd7e46af0f2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3066a-cru + - rockchip,rk3188-cru + - rockchip,rk3188a-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt deleted file mode 100644 index f323048127eb..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip RK3228 Clock and Reset Unit - -The RK3228 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3228-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional - - "ext_hsadc" - external HSADC clock - optional - - "phy_50m_out" - output clock of the pll in the mac phy - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3228-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10110000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10110000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml new file mode 100644 index 000000000000..cf7dc01d9478 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3228 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3228 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +properties: + compatible: + enum: + - rockchip,rk3228-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3228-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt deleted file mode 100644 index bf3a9ec19241..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Rockchip RK3288 Clock and Reset Unit - -The RK3288 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -A revision of this SoC is available: rk3288w. The clock tree is a bit -different so another dt-compatible is available. Noticed that it is only -setting the difference but there is no automatic revision detection. This -should be performed by bootloaders. - -Required Properties: - -- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in - case of this revision of Rockchip rk3288. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_edp_24m" - external display port clock - optional, - - "ext_vip" - external VIP clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml new file mode 100644 index 000000000000..96bc05749e1a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3288 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3288 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + + A revision of this SoC is available: rk3288w. The clock tree is a bit + different so another dt-compatible is available. Noticed that it is only + setting the difference but there is no automatic revision detection. This + should be performed by boot loaders. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_hsadc" - external HSADC clock - optional, + - "ext_edp_24m" - external display port clock - optional, + - "ext_vip" - external VIP clock - optional, + - "ext_isp" - external ISP clock - optional, + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3288-cru + - rockchip,rk3288w-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3288-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt deleted file mode 100644 index 9b151c5b0c90..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Rockchip RK3308 Clock and Reset Unit - -The RK3308 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: CRU should be "rockchip,rk3308-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in", - "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in", - "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional, - - "mac_clkin" - external MAC clock - optional - -Example: Clock controller node: - - cru: clock-controller@ff500000 { - compatible = "rockchip,rk3308-cru"; - reg = <0x0 0xff500000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff0a0000 { - compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff0a0000 0x0 0x100>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml new file mode 100644 index 000000000000..523ee578a586 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3308 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3308 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", + "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in", + "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or + SPDIF clock - optional + - "mac_clkin" - external MAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3308-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0xff500000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt deleted file mode 100644 index 7c8bbcfed8d2..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3368 Clock and Reset Unit - -The RK3368 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3368-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional - - "ext_hsadc" - external HSADC clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - - "ext_vip" - external VIP clock - optional, - - "usbotg_out" - output clock of the pll in the otg phy - -Example: Clock controller node: - - cru: clock-controller@ff760000 { - compatible = "rockchip,rk3368-cru"; - reg = <0x0 0xff760000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml new file mode 100644 index 000000000000..adb67877720d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3368 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3368 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_isp" - external ISP clock - optional + - "ext_jtag" - external JTAG clock - optional + - "ext_vip" - external VIP clock - optional + - "usbotg_out" - output clock of the pll in the otg phy + +properties: + compatible: + enum: + - rockchip,rk3368-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml index 72b286a1beba..54da1e31ea73 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip RK3399 Clock and Reset Unit maintainers: - - Xing Zheng <zhengxing@rock-chips.com> + - Elaine Zhang <zhangqing@rock-chips.com> - Heiko Stuebner <heiko@sntech.de> description: | @@ -22,11 +22,11 @@ description: | There are several clocks that are generated outside the SoC. It is expected that they are defined using standard clock bindings with following clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "clkin_gmac" - external GMAC clock - optional, - - "clkin_i2s" - external I2S clock - optional, - - "pclkin_cif" - external ISP clock - optional, + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "clkin_gmac" - external GMAC clock - optional, + - "clkin_i2s" - external I2S clock - optional, + - "pclkin_cif" - external ISP clock - optional, - "clk_usbphy0_480m" - output clock of the pll in the usbphy0 - "clk_usbphy1_480m" - output clock of the pll in the usbphy1 @@ -46,24 +46,15 @@ properties: const: 1 clocks: - minItems: 1 - - assigned-clocks: - minItems: 1 - maxItems: 64 - - assigned-clock-parents: - minItems: 1 - maxItems: 64 + maxItems: 1 - assigned-clock-rates: - minItems: 1 - maxItems: 64 + clock-names: + const: xin24m rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle - description: > - phandle to the syscon managing the "general register files". It is used + description: + Phandle to the syscon managing the "general register files". It is used for GRF muxes, if missing any muxes present in the GRF will not be available. @@ -77,7 +68,7 @@ additionalProperties: false examples: - | - pmucru: pmu-clock-controller@ff750000 { + pmucru: clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0xff750000 0x1000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml index b2c26097827f..fc7546f521c5 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml @@ -34,6 +34,19 @@ properties: "#reset-cells": const: 1 + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt deleted file mode 100644 index 161326a4f9c1..000000000000 --- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Rockchip RV1108 Clock and Reset Unit - -The RV1108 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rv1108-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_vip" - external VIP clock - optional - - "ext_i2s" - external I2S clock - optional - - "ext_gmac" - external GMAC clock - optional - - "hdmiphy" - external clock input derived from HDMI PHY - optional - - "usbphy" - external clock input derived from USB PHY - optional - -Example: Clock controller node: - - cru: cru@20200000 { - compatible = "rockchip,rv1108-cru"; - reg = <0x20200000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10230000 { - compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; - reg = <0x10230000 0x100>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml new file mode 100644 index 000000000000..20421c22f184 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1108 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RV1108 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_vip" - external VIP clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "hdmiphy" - external clock input derived from HDMI PHY - optional + - "usbphy" - external clock input derived from USB PHY - optional + +properties: + compatible: + enum: + - rockchip,rv1108-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml index b644bbd0df38..bee13436d1ea 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml @@ -61,4 +61,3 @@ examples: clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; clock-names = "aclk200", "aclk400_mcuisp"; }; - diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml new file mode 100644 index 000000000000..eafc715d2d02 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Auto v9 SoC clock controller + +maintainers: + - Chanho Park <chanho61.park@samsung.com> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Exynos Auto v9 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz). + The external OSCCLK must be defined as fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynosautov9.h' header. + +properties: + compatible: + enum: + - samsung,exynosautov9-cmu-top + - samsung,exynosautov9-cmu-busmc + - samsung,exynosautov9-cmu-core + - samsung,exynosautov9-cmu-fsys2 + - samsung,exynosautov9-cmu-peric0 + - samsung,exynosautov9-cmu-peric1 + - samsung,exynosautov9-cmu-peris + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-busmc + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_BUSMC bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_busmc_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_core_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys2 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS2 bus clock (from CMU_TOP) + - description: UFS clock (from CMU_TOP) + - description: Ethernet clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys2_bus + - const: dout_fsys2_clkcmu_ufs_embd + - const: dout_fsys2_clkcmu_ethernet + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC0 bus clock (from CMU_TOP) + - description: PERIC0 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric0_bus + - const: dout_clkcmu_peric0_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC1 bus clock (from CMU_TOP) + - description: PERIC1 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric1_bus + - const: dout_clkcmu_peric1_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peris + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIS bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peris_bus + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_FSYS2 + - | + #include <dt-bindings/clock/samsung,exynosautov9.h> + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index a0ae4867ed27..f8c474227807 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -41,6 +41,7 @@ description: | The list of valid indices for STM32MP1 is available in: include/dt-bindings/reset-controller/stm32mp1-resets.h + include/dt-bindings/reset-controller/stm32mp13-resets.h This file implements defines like: #define LTDC_R 3072 @@ -57,7 +58,10 @@ properties: - enum: - st,stm32mp1-rcc-secure - st,stm32mp1-rcc + - st,stm32mp13-rcc - const: syscon + clocks: true + clock-names: true reg: maxItems: 1 @@ -68,14 +72,53 @@ required: - compatible - reg +if: + properties: + compatible: + contains: + enum: + - st,stm32mp1-rcc-secure +then: + properties: + clocks: + description: Specifies oscillators. + maxItems: 5 + + clock-names: + items: + - const: hse + - const: hsi + - const: csi + - const: lse + - const: lsi + required: + - clocks + - clock-names +else: + properties: + clocks: + description: + Specifies the external RX clock for ethernet MAC. + maxItems: 1 + + clock-names: + const: ETH_RX_CLK/ETH_REF_CLK + additionalProperties: false examples: - | + #include <dt-bindings/clock/stm32mp1-clks.h> rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc-secure", "syscon"; reg = <0x50000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; }; ... diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml index 9bc95a308477..2150307219a0 100644 --- a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml +++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml @@ -109,6 +109,25 @@ properties: additionalProperties: false + clkout-clock: + description: A subnode with three clock cells for externally routed clocks, + output clocks. These are two PRCMU-internal clocks that can be divided and + muxed out on the pads of the DB8500 SoC. + type: object + + properties: + '#clock-cells': + description: + The first cell indicates which output clock we are using, + possible values are 0 (CLKOUT1) and 1 (CLKOUT2). + The second cell indicates which clock we want to use as source, + possible values are 0 thru 7, see the defines for the different + source clocks. + The third cell is a divider, legal values are 1 thru 63. + const: 3 + + additionalProperties: false + required: - compatible - reg @@ -119,3 +138,41 @@ required: - smp-twd-clock additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ste-db8500-clkout.h> + clocks@8012 { + compatible = "stericsson,u8500-clks"; + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + prcc_reset: prcc-reset-controller { + #reset-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + + clkout_clk: clkout-clock { + #clock-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 9b537bc876b5..66765116aff5 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -15,6 +15,7 @@ properties: - enum: - ti,am654-ehrpwm-tbclk - ti,am64-epwm-tbclk + - ti,am62-epwm-tbclk - const: syscon "#clock-cells": diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt index 18af6b9409e3..d20db7974a38 100644 --- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt +++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt @@ -21,6 +21,7 @@ Required properties : "ti,clkctrl-l4-per" "ti,clkctrl-l4-secure" "ti,clkctrl-l4-wkup" +- clock-output-names : from common clock binding - #clock-cells : shall contain 2 with the first entry being the instance offset from the clock domain base and the second being the clock index @@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430: l4per: cm@1400 { cm_l4per@0 { cm_l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per"; reg = <0x20 0x1b0>; #clock-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt index cb76b3f2b341..9c6199249ce5 100644 --- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -17,6 +17,9 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of clocks within this domain +Optional properties: +- clock-output-names : from common clock binding. + Examples: dss_clkdm: dss_clkdm { compatible = "ti,clockdomain"; diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt index 5f43c4706b09..33ac7c9ad053 100644 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -27,6 +27,9 @@ Required properties: - clocks : link phandles of component clocks - #clock-cells : from common clock binding; shall be set to 0. +Optional properties: +- clock-output-names : from common clock binding. + Examples: usb_l4_gate_ick: usb_l4_gate_ick { diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt index 662b36d53bf0..518e3c142276 100644 --- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -16,6 +16,7 @@ Required properties: - clocks: parent clock. Optional properties: +- clock-output-names : from common clock binding. - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, see [2] - reg: offset for the autoidle register of this clock, see [2] diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 56d603c1f716..b4820b1de4f0 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -36,6 +36,7 @@ Required properties: ti,clkdm-gate-clock type Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for programming the clock gate, invalid for ti,clkdm-gate-clock type - ti,set-bit-to-disable : inverts default gate programming. Setting the bit diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 3f4704040140..94ec77dc3c59 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -28,6 +28,7 @@ Required properties: - reg : base address for the control register Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) Examples: diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index eec8994b9be8..e17425a58621 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -42,6 +42,7 @@ Required properties: - reg : register offset for register controlling adjustable mux Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : number of bits to shift the bit-mask, defaults to 0 if not present - ti,index-starts-at-one : valid input select programming starts at 1, not diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 00648f9d9278..026a9f9e1aeb 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -82,4 +82,3 @@ examples: clock-names = "bus", "mod"; resets = <&ccu RST_BUS_CE>; }; - diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index a410d2cedde6..02f47c2e7998 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -15,6 +15,7 @@ properties: - ti,j721e-sa2ul - ti,am654-sa2ul - ti,am64-sa2ul + - ti,am62-sa3ul reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index d4412aea7b73..c388ae5da1e4 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -62,6 +62,7 @@ properties: - allwinner,sun8i-r40-display-engine - allwinner,sun8i-v3s-display-engine - allwinner,sun9i-a80-display-engine + - allwinner,sun20i-d1-display-engine - allwinner,sun50i-a64-display-engine - allwinner,sun50i-h6-display-engine diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 3a7d5d731712..4a92a4c7dcd7 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -33,6 +33,8 @@ properties: - const: allwinner,sun8i-v3s-tcon - const: allwinner,sun9i-a80-tcon-lcd - const: allwinner,sun9i-a80-tcon-tv + - const: allwinner,sun20i-d1-tcon-lcd + - const: allwinner,sun20i-d1-tcon-tv - items: - enum: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index 4f91eec26de9..cb243bc58ef7 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -19,6 +19,8 @@ properties: - allwinner,sun8i-r40-de2-mixer-0 - allwinner,sun8i-r40-de2-mixer-1 - allwinner,sun8i-v3s-de2-mixer + - allwinner,sun20i-d1-de2-mixer-0 + - allwinner,sun20i-d1-de2-mixer-1 - allwinner,sun50i-a64-de2-mixer-0 - allwinner,sun50i-a64-de2-mixer-1 - allwinner,sun50i-h6-de3-mixer-0 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml index 61ef7b337218..845e226d7aff 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -41,6 +41,7 @@ properties: compatible: enum: - allwinner,sun8i-r40-tcon-top + - allwinner,sun20i-d1-tcon-top - allwinner,sun50i-h6-tcon-top reg: @@ -48,31 +49,15 @@ properties: clocks: minItems: 2 - items: - - description: The TCON TOP interface clock - - description: The TCON TOP TV0 clock - - description: The TCON TOP TVE0 clock - - description: The TCON TOP TV1 clock - - description: The TCON TOP TVE1 clock - - description: The TCON TOP MIPI DSI clock + maxItems: 6 clock-names: minItems: 2 - items: - - const: bus - - const: tcon-tv0 - - const: tve0 - - const: tcon-tv1 - - const: tve1 - - const: dsi + maxItems: 6 clock-output-names: minItems: 1 maxItems: 3 - description: > - The first item is the name of the clock created for the TV0 - channel, the second item is the name of the TCON TV1 channel - clock and the third one is the name of the DSI channel clock. resets: maxItems: 1 @@ -129,32 +114,92 @@ required: additionalProperties: false -if: - properties: - compatible: - contains: - const: allwinner,sun50i-h6-tcon-top - -then: - properties: - clocks: - maxItems: 2 - - clock-output-names: - maxItems: 1 - -else: - properties: - clocks: - minItems: 6 - - clock-output-names: - minItems: 3 - - ports: - required: - - port@2 - - port@3 +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-r40-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP TV1 clock + - description: The TCON TOP TVE1 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: tcon-tv1 + - const: tve1 + - const: dsi + + clock-output-names: + items: + - description: TCON TV0 output clock name + - description: TCON TV1 output clock name + - description: DSI output clock name + + ports: + required: + - port@2 + - port@3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun20i-d1-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: dsi + + clock-output-names: + items: + - description: TCON TV0 output clock name + - description: DSI output clock name + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + + clock-output-names: + items: + - description: TCON TV0 output clock name examples: - | diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 343598c9f473..2e208d2fc98f 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -150,4 +150,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt deleted file mode 100644 index 78bc24296f3e..000000000000 --- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt +++ /dev/null @@ -1,79 +0,0 @@ -ARM HDLCD - -This is a display controller found on several development platforms produced -by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB -streamer that reads the data from a framebuffer and sends it to a single -digital encoder (DVI or HDMI). - -Required properties: - - compatible: "arm,hdlcd" - - reg: Physical base address and length of the controller's registers. - - interrupts: One interrupt used by the display controller to notify the - interrupt controller when any of the interrupt sources programmed in - the interrupt mask register have activated. - - clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. - - clock-names: A list of clock names. For HDLCD it should contain: - - "pxlclk" for the clock feeding the output PLL of the controller. - -Required sub-nodes: - - port: The HDLCD connection to an encoder chip. The connection is modeled - using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt. - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be - used for the framebuffer; if not present, the framebuffer may be located - anywhere in memory. - - -Example: - -/ { - ... - - hdlcd@2b000000 { - compatible = "arm,hdlcd"; - reg = <0 0x2b000000 0 0x1000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&oscclk5>; - clock-names = "pxlclk"; - port { - hdlcd_output: endpoint@0 { - remote-endpoint = <&hdmi_enc_input>; - }; - }; - }; - - /* HDMI encoder on I2C bus */ - i2c@7ffa0000 { - .... - hdmi-transmitter@70 { - compatible = "....."; - reg = <0x70>; - port@0 { - hdmi_enc_input: endpoint { - remote-endpoint = <&hdlcd_output>; - }; - - hdmi_enc_output: endpoint { - remote-endpoint = <&hdmi_1_port>; - }; - }; - }; - - }; - - hdmi1: connector@1 { - compatible = "hdmi-connector"; - type = "a"; - port { - hdmi_1_port: endpoint { - remote-endpoint = <&hdmi_enc_output>; - }; - }; - }; - - ... -}; diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml new file mode 100644 index 000000000000..a2670258c48d --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm HDLCD display controller binding + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm HDLCD is a display controller found on several development platforms + produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an + RGB streamer that reads the data from a framebuffer and sends it to a single + digital encoder (DVI or HDMI). + +properties: + compatible: + const: arm,hdlcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: pxlclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - port + +examples: + - | + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0x2b000000 0x1000>; + interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + hdmi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + port { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt deleted file mode 100644 index 8513695ee47f..000000000000 --- a/Documentation/devicetree/bindings/display/arm,komeda.txt +++ /dev/null @@ -1,78 +0,0 @@ -Device Tree bindings for Arm Komeda display driver - -Required properties: -- compatible: Should be "arm,mali-d71" -- reg: Physical base address and length of the registers in the system -- interrupts: the interrupt line number of the device in the system -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: A list of clock names. It should contain: - - "aclk": for the main processor clock -- #address-cells: Must be 1 -- #size-cells: Must be 0 -- iommus: configure the stream id to IOMMU, Must be configured if want to - enable iommu in display. for how to configure this node please reference - devicetree/bindings/iommu/arm,smmu-v3.txt, - devicetree/bindings/iommu/iommu.txt - -Required properties for sub-node: pipeline@nq -Each device contains one or two pipeline sub-nodes (at least one), each -pipeline node should provide properties: -- reg: Zero-indexed identifier for the pipeline -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: should contain: - - "pxclk": pixel clock - -- port: each pipeline connect to an encoder input port. The connection is - modeled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - -Example: -/ { - ... - - dp0: display@c00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "arm,mali-d71"; - reg = <0xc00000 0x20000>; - interrupts = <0 168 4>; - clocks = <&dpu_aclk>; - clock-names = "aclk"; - iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, - <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, - <&smmu 8>, <&smmu 9>; - - dp0_pipe0: pipeline@0 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <0>; - - port { - dp0_pipe0_out: endpoint { - remote-endpoint = <&db_dvi0_in>; - }; - }; - }; - - dp0_pipe1: pipeline@1 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <1>; - - port { - dp0_pipe1_out: endpoint { - remote-endpoint = <&db_dvi1_in>; - }; - }; - }; - }; - ... -}; diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml new file mode 100644 index 000000000000..9f4aade97f10 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,komeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Komeda display processor + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Mali D71 display processor supports up to two displays with up + to a 4K resolution each. Each pipeline can be composed of up to four + layers. It is typically connected to a digital display connector like HDMI. + +properties: + compatible: + oneOf: + - items: + - const: arm,mali-d32 + - const: arm,mali-d71 + - const: arm,mali-d71 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: aclk + + clocks: + maxItems: 1 + description: The main DPU processor clock + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + description: + The stream IDs for each of the used pipelines, each four IDs for the + four layers, plus one for the write-back stream. + minItems: 5 + maxItems: 10 + +patternProperties: + '^pipeline@[01]$': + type: object + description: + clocks + + properties: + reg: + enum: [ 0, 1 ] + + clock-names: + const: pxclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + +additionalProperties: false + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clock-names + - clocks + - pipeline@0 + +examples: + - | + display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <168>; + clocks = <&dpu_aclk>; + clock-names = "aclk"; + iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, + <&smmu 8>, + <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, + <&smmu 9>; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt deleted file mode 100644 index 7a97a2b48c2a..000000000000 --- a/Documentation/devicetree/bindings/display/arm,malidp.txt +++ /dev/null @@ -1,68 +0,0 @@ -ARM Mali-DP - -The following bindings apply to a family of Display Processors sold as -licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and -DP650 processors that offer multiple composition layers, support for -rotation and scaling output. - -Required properties: - - compatible: should be one of - "arm,mali-dp500" - "arm,mali-dp550" - "arm,mali-dp650" - depending on the particular implementation present in the hardware - - reg: Physical base address and size of the block of registers used by - the processor. - - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt, - interrupt client nodes. - - interrupt-names: name of the engine inside the processor that will - use the corresponding interrupt. Should be one of "DE" or "SE". - - clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' - - clock-names: A list of clock names. It should contain: - - "pclk": for the APB interface clock - - "aclk": for the AXI interface clock - - "mclk": for the main processor clock - - "pxlclk": for the pixel clock feeding the output PLL of the processor. - - arm,malidp-output-port-lines: Array of u8 values describing the number - of output lines per channel (R, G and B). - -Required sub-nodes: - - port: The Mali DP connection to an encoder input port. The connection - is modelled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS - levels of DP500's QoS signaling. - - -Example: - -/ { - ... - - dp0: malidp@6f200000 { - compatible = "arm,mali-dp650"; - reg = <0 0x6f200000 0 0x20000>; - memory-region = <&display_reserved>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 168 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "DE", "SE"; - clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; - clock-names = "pxlclk", "mclk", "aclk", "pclk"; - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; - port { - dp0_output: endpoint { - remote-endpoint = <&tda998x_2_input>; - }; - }; - }; - - ... -}; diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml new file mode 100644 index 000000000000..795a08ac9f12 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,malidp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Mali Display Processor (Mali-DP) binding + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The following bindings apply to a family of Display Processors sold as + licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and + DP650 processors that offer multiple composition layers, support for + rotation and scaling output. + +properties: + compatible: + enum: + - arm,mali-dp500 + - arm,mali-dp550 + - arm,mali-dp650 + + reg: + maxItems: 1 + + interrupts: + items: + - description: + The interrupt used by the Display Engine (DE). Can be shared with + the interrupt for the Scaling Engine (SE), but it will have to be + listed individually. + - description: + The interrupt used by the Scaling Engine (SE). Can be shared with + the interrupt for the Display Engine (DE), but it will have to be + listed individually. + + interrupt-names: + items: + - const: DE + - const: SE + + clock-names: + items: + - const: pxlclk + - const: mclk + - const: aclk + - const: pclk + + clocks: + items: + - description: the pixel clock feeding the output PLL of the processor + - description: the main processor clock + - description: the AXI interface clock + - description: the APB interface clock + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + arm,malidp-output-port-lines: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Number of output lines/bits for each colour channel. + items: + - description: number of output lines for the red channel (R) + - description: number of output lines for the green channel (G) + - description: number of output lines for the blue channel (B) + + arm,malidp-arqos-high-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + integer describing the ARQoS levels of DP500's QoS signaling + + arm,malidp-arqos-value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Quality-of-Service value for the display engine FIFOs, to write + into the RQOS register of the DP500. + See the ARM Mali-DP500 TRM for details on the encoding. + If omitted, the RQOS register will not be changed. + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - port + - arm,malidp-output-port-lines + +examples: + - | + dp0: malidp@6f200000 { + compatible = "arm,mali-dp650"; + reg = <0x6f200000 0x20000>; + memory-region = <&display_reserved>; + interrupts = <168>, <168>; + interrupt-names = "DE", "SE"; + clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-high-level = <0xd000d000>; + + port { + dp0_output: endpoint { + remote-endpoint = <&tda998x_2_input>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt deleted file mode 100644 index 3f977e72a200..000000000000 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ /dev/null @@ -1,110 +0,0 @@ -* ARM PrimeCell Color LCD Controller PL110/PL111 - -See also Documentation/devicetree/bindings/arm/primecell.yaml - -Required properties: - -- compatible: must be one of: - "arm,pl110", "arm,primecell" - "arm,pl111", "arm,primecell" - -- reg: base address and size of the control registers block - -- interrupt-names: either the single entry "combined" representing a - combined interrupt output (CLCDINTR), or the four entries - "mbe", "vcomp", "lnbu", "fuf" representing the individual - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts - -- interrupts: contains an interrupt specifier for each entry in - interrupt-names - -- clock-names: should contain "clcdclk" and "apb_pclk" - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer - may be located anywhere in the memory - -- max-memory-bandwidth: maximum bandwidth in bytes per second that the - cell's memory interface can handle; if not present, the memory - interface is fast enough to handle all possible video modes - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - -Deprecated properties: - The port's endbpoint subnode had this, now deprecated property - in the past. Drivers should be able to survive without it: - - - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, - defining the way CLD pads are wired up; first value - contains index of the "CLD" external pin (pad) used - as R0 (first bit of the red component), second value - index of the pad used as G0, third value index of the - pad used as B0, see also "LCD panel signal multiplexing - details" paragraphs in the PL110/PL111 Technical - Reference Manuals; this implicitly defines available - color modes, for example: - - PL111 TFT 4:4:4 panel: - arm,pl11x,tft-r0g0b0-pads = <4 15 20>; - - PL110 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - - PL111 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 11 19>; - - PL111 TFT 5:6:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 10 19>; - - PL110 and PL111 TFT 8:8:8 panel: - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: - arm,pl11x,tft-r0g0b0-pads = <16 8 0>; - - -Example: - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ - - port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - }; - }; - - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml new file mode 100644 index 000000000000..b545c6d20325 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,pl11x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm PrimeCell Color LCD Controller PL110/PL111 + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out + a framebuffer region in system memory, and creates timed signals for + a variety of LCD panels. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl110 + - arm,pl111 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,pl110 + - arm,pl111 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupt-names: + oneOf: + - const: combined + description: + The IP provides four individual interrupt lines, but also one + combined line. If the integration only connects this line to the + interrupt controller, this single interrupt is noted here. + - items: + - const: mbe # CLCDMBEINTR + - const: vcomp # CLCDVCOMPINTR + - const: lnbu # CLCDLNBUINTR + - const: fuf # CLCDFUFINTR + + interrupts: + minItems: 1 + maxItems: 4 + + clock-names: + items: + - const: clcdclk + - const: apb_pclk + + clocks: + items: + - description: The CLCDCLK reference clock for the controller. + - description: The HCLK AHB slave clock for the register access. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum bandwidth in bytes per second that the cell's memory interface + can handle. + If not present, the memory interface is fast enough to handle all + possible video modes. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + arm,pl11x,tft-r0g0b0-pads: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: index of CLD pad used for first red bit (R0) + - description: index of CLD pad used for first green bit (G0) + - description: index of CLD pad used for first blue bit (G0) + deprecated: true + description: | + DEPRECATED. An array of three 32-bit values, defining the way + CLD[23:0] pads are wired up. + The first value contains the index of the "CLD" external pin (pad) + used as R0 (first bit of the red component), the second value for + green, the third value for blue. + See also "LCD panel signal multiplexing details" paragraphs in the + PL110/PL111 Technical Reference Manuals. + This implicitly defines available color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + +additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - port + +allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + required: + - interrupt-names + +examples: + - | + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <44>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + }; + }; + }; + + panel { + compatible = "arm,rtsm-display", "panel-dpi"; + power-supply = <&vcc_supply>; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml index 7257fd0ae4da..4f0b7c71313c 100644 --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -41,10 +41,26 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Video port for MIPI DSI input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + port@1: $ref: /schemas/graph.yaml#/properties/port description: diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml new file mode 100644 index 000000000000..77f174eee424 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DPI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The i.MX8MP mediamix contains two registers which are responsible + for configuring the on-SoC DPI-to-LVDS serializer. This describes + those registers as bridge within the DT. + +properties: + compatible: + const: fsl,imx8mp-ldb + + clocks: + maxItems: 1 + + clock-names: + const: ldb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + + blk-ctrl { + bridge { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml index a88a5d8c7ba5..a44d025d33bd 100644 --- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml +++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -78,4 +78,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index 6ec1d5fbb8bc..c6e81f532215 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -38,6 +38,9 @@ properties: interrupts: maxItems: 1 + "#sound-dai-cells": + const: 0 + ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml new file mode 100644 index 000000000000..9a6e9b25d14a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS + or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. + +properties: + compatible: + enum: + - lontium,lt9211 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vccio-supply: + description: Regulator for 1.8V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI input or + LVDS port-1 for LVDS input or DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input or LVDS port-2 + for LVDS input. Used in combination with primary + port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI output or + LVDS port-1 for LVDS output or DPI output. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI output or LVDS port-2 + for LVDS output. Used in combination with primary + port-1 to drive higher resolution displays. + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - vccio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9211"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <<9211_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 186e17be51fb..8ab156e0a8cf 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -119,4 +119,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index f1541cc05297..ed280053ec62 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -53,16 +53,32 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | DSI input port. The remote endpoint phandle should be a reference to a valid DSI output endpoint node + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + port@1: $ref: /schemas/graph.yaml#/properties/port description: | - DPI input port. The remote endpoint phandle should be a - reference to a valid DPI output endpoint node + DPI input/output port. The remote endpoint phandle should be a + reference to a valid DPI output or input endpoint node. port@2: $ref: /schemas/graph.yaml#/properties/port diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index 3bd670b8e5cd..0b6f5bef120f 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -58,6 +58,7 @@ properties: properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] port@1: diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml index 0091df9dd73b..989ab312c1f4 100644 --- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -105,4 +105,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 61f0ed1e388f..d4d585485e7b 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -21,16 +21,19 @@ description: | properties: compatible: oneOf: + - enum: + - mediatek,mt8173-disp-aal + - mediatek,mt8183-disp-aal - items: + - enum: + - mediatek,mt2712-disp-aal - const: mediatek,mt8173-disp-aal - items: - enum: - - mediatek,mt2712-disp-aal - - mediatek,mt8183-disp-aal + - mediatek,mt8186-disp-aal - mediatek,mt8192-disp-aal - mediatek,mt8195-disp-aal - - enum: - - mediatek,mt8173-disp-aal + - const: mediatek,mt8183-disp-aal reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml index 0ed53b6238f0..63fb02014a56 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml @@ -28,8 +28,11 @@ properties: - items: - enum: - mediatek,mt8195-disp-ccorr + - const: mediatek,mt8192-disp-ccorr + - items: - enum: - - mediatek,mt8192-disp-ccorr + - mediatek,mt8186-disp-ccorr + - const: mediatek,mt8183-disp-ccorr reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index 3ad842eb5668..d2f89ee7996f 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -32,15 +32,14 @@ properties: - enum: - mediatek,mt7623-disp-color - mediatek,mt2712-disp-color - - enum: - - mediatek,mt2701-disp-color + - const: mediatek,mt2701-disp-color - items: - enum: - mediatek,mt8183-disp-color + - mediatek,mt8186-disp-color - mediatek,mt8192-disp-color - mediatek,mt8195-disp-color - - enum: - - mediatek,mt8173-disp-color + - const: mediatek,mt8173-disp-color reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml index 6657549af165..8ad8187c02d1 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml @@ -26,10 +26,10 @@ properties: - const: mediatek,mt8183-disp-dither - items: - enum: + - mediatek,mt8186-disp-dither - mediatek,mt8192-disp-dither - mediatek,mt8195-disp-dither - - enum: - - mediatek,mt8183-disp-dither + - const: mediatek,mt8183-disp-dither reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 843f89d6053f..77ee1b923991 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt7623-dpi - mediatek,mt8173-dpi - mediatek,mt8183-dpi + - mediatek,mt8186-dpi - mediatek,mt8192-dpi reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index 78442339314f..a89ea0ea7542 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -27,10 +27,10 @@ properties: - const: mediatek,mt8183-disp-gamma - items: - enum: + - mediatek,mt8186-disp-gamma - mediatek,mt8192-disp-gamma - mediatek,mt8195-disp-gamma - - enum: - - mediatek,mt8183-disp-gamma + - const: mediatek,mt8183-disp-gamma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index d635c5dcb68b..69ba75777dac 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -102,4 +102,3 @@ examples: clock-names = "merge"; }; }; - diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml index 00e6a1041a9b..3fdad71210b4 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml @@ -23,21 +23,16 @@ description: | properties: compatible: - oneOf: - - items: - - const: mediatek,mt2701-disp-mutex - - items: - - const: mediatek,mt2712-disp-mutex - - items: - - const: mediatek,mt8167-disp-mutex - - items: - - const: mediatek,mt8173-disp-mutex - - items: - - const: mediatek,mt8183-disp-mutex - - items: - - const: mediatek,mt8192-disp-mutex - - items: - - const: mediatek,mt8195-disp-mutex + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt8167-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8183-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml index da999ba53b7c..4e94f4e947ad 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml @@ -25,6 +25,10 @@ properties: - const: mediatek,mt8183-disp-ovl-2l - items: - const: mediatek,mt8192-disp-ovl-2l + - items: + - enum: + - mediatek,mt8186-disp-ovl-2l + - const: mediatek,mt8192-disp-ovl-2l reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index f77094e61443..a2a27d0ca038 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -33,13 +33,15 @@ properties: - enum: - mediatek,mt7623-disp-ovl - mediatek,mt2712-disp-ovl - - enum: - - mediatek,mt2701-disp-ovl + - const: mediatek,mt2701-disp-ovl - items: - enum: - mediatek,mt8195-disp-ovl + - const: mediatek,mt8183-disp-ovl + - items: - enum: - - mediatek,mt8183-disp-ovl + - mediatek,mt8186-disp-ovl + - const: mediatek,mt8192-disp-ovl reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml index 2d769422e29f..654080bfbdfb 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml @@ -23,6 +23,10 @@ properties: oneOf: - items: - const: mediatek,mt8192-disp-postmask + - items: + - enum: + - mediatek,mt8186-disp-postmask + - const: mediatek,mt8192-disp-postmask reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml index e8c72afa0630..0882ae86e6c4 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -35,13 +35,12 @@ properties: - enum: - mediatek,mt7623-disp-rdma - mediatek,mt2712-disp-rdma - - enum: - - mediatek,mt2701-disp-rdma + - const: mediatek,mt2701-disp-rdma - items: - enum: + - mediatek,mt8186-disp-rdma - mediatek,mt8192-disp-rdma - - enum: - - mediatek,mt8183-disp-rdma + - const: mediatek,mt8183-disp-rdma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index 6fb7e321f011..734d14de966d 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -66,6 +66,10 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 12a86b1ec1bc..b41991eaa454 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -65,6 +65,10 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index fbeb931a026e..6e417d06fc79 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -64,6 +64,10 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 0dca4b3d66e4..1a42491efdbc 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -57,6 +57,10 @@ properties: ranges: true + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 20ce88ab4b3a..6058948a9764 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -75,4 +75,3 @@ examples: }; }; ... - diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml new file mode 100644 index 000000000000..817a9bed7d5a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: leadtek,ltk035c5444t + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk035c5444t"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml index 17cbd0ad32bf..ad7d3575190e 100644 --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -50,4 +50,3 @@ examples: }; }; ... - diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 1eb9dd4f8f58..21ba90c9fe33 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -105,6 +105,8 @@ properties: - chunghwa,claa101wb01 # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wb03 + # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface. + - dataimage,fg040346dsswbg04 # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. - dataimage,scf0700c48ggu18 # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel @@ -294,6 +296,8 @@ properties: - starry,kr070pe2t # Starry 12.2" (1920x1200 pixels) TFT LCD panel - starry,kr122ea0sra + # Startek KD070WVFPA043-C069A 7" TFT LCD panel + - startek,kd070wvfpa # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel - team-source-display,tst043015cmhx # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 7749de95ee40..229e3b36ee29 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -146,6 +146,7 @@ properties: Horizontal sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] vsync-active: @@ -153,6 +154,7 @@ properties: Vertical sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] de-active: @@ -160,6 +162,7 @@ properties: Data enable. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] pixelclk-active: @@ -169,6 +172,7 @@ properties: sample data on rising edge. Use 1 to drive pixel data on rising edge and sample data on falling edge + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] syncclk-active: @@ -179,6 +183,7 @@ properties: sample sync on rising edge of pixel clock. Use 1 to drive sync on rising edge and sample sync on falling edge of pixel clock + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] interlaced: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index 745dd247c409..617aa8c8c03a 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -24,6 +24,7 @@ properties: dsi-lanes: description: Number of DSI lanes to be used must be <3> or <4> + $ref: /schemas/types.yaml#/definitions/uint32 enum: [3, 4] v3p3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index ca959451557e..1cdc91b3439f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -36,6 +36,7 @@ properties: init-delay: description: delay after initialization sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 panel-width-mm: description: physical panel width [mm] diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index da3b889ad8fc..7e59dee15a5f 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -23,10 +23,22 @@ properties: - rockchip,rk3288-dw-hdmi - rockchip,rk3328-dw-hdmi - rockchip,rk3399-dw-hdmi + - rockchip,rk3568-dw-hdmi reg-io-width: const: 4 + avdd-0v9-supply: + description: + A 0.9V supply that powers up the SoC internal circuitry. The actual pin name + varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes + HDMI_AVDD_1V0. + + avdd-1v8-supply: + description: + A 1.8V supply that powers up the SoC internal circuitry. The pin name on the + SoC usually is HDMI_TX_AVDD_1V8. + clocks: minItems: 2 items: @@ -36,7 +48,8 @@ properties: # order when present. - description: The HDMI CEC controller main clock - description: Power for GRF IO - - description: External clock for some HDMI PHY + - description: External clock for some HDMI PHY (old clock name, deprecated) + - description: External clock for some HDMI PHY (new name) clock-names: minItems: 2 @@ -47,10 +60,14 @@ properties: - cec - grf - vpll + - ref - enum: - grf - vpll - - const: vpll + - ref + - enum: + - vpll + - ref ddc-i2c-bus: $ref: /schemas/types.yaml#/definitions/phandle @@ -72,6 +89,7 @@ properties: The unwedge pinctrl entry shall drive the DDC SDA line low. This is intended to work around a hardware errata that can cause the DDC I2C bus to be wedged. + minItems: 1 items: - const: default - const: unwedge @@ -79,27 +97,21 @@ properties: ports: $ref: /schemas/graph.yaml#/properties/ports - properties: - port: - $ref: /schemas/graph.yaml#/$defs/port-base - unevaluatedProperties: false + patternProperties: + "^port(@0)?$": + $ref: /schemas/graph.yaml#/properties/port description: Input of the DWC HDMI TX - properties: + endpoint: + description: Connection to the VOP endpoint@0: - $ref: /schemas/graph.yaml#/properties/endpoint description: Connection to the VOPB - endpoint@1: - $ref: /schemas/graph.yaml#/properties/endpoint description: Connection to the VOPL - - required: - - endpoint@0 - - endpoint@1 - - required: - - port + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output of the DWC HDMI TX rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml new file mode 100644 index 000000000000..fba45091d909 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP2) + +description: + VOP2 (Video Output Processor v2) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3566-vop + - rockchip,rk3568-vop + + reg: + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + reg-names: + items: + - const: vop + - const: gamma-lut + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Clock for the ahb bus to R/W the phy regs. + - description: Pixel clock for video port 0. + - description: Pixel clock for video port 1. + - description: Pixel clock for video port 2. + + clock-names: + items: + - const: aclk + - const: hclk + - const: dclk_vp0 + - const: dclk_vp1 + - const: dclk_vp2 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to GRF regs used for misc control + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP1 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of VP2 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3568-power.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + vop: vop@fe040000 { + compatible = "rockchip,rk3568-vop"; + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2"; + power-domains = <&power RK3568_PD_VO>; + iommus = <&vop_mmu>; + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml index 0cebaaefda03..157b1a7b18f9 100644 --- a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml @@ -32,15 +32,13 @@ properties: - okaya,rh128128t - const: sitronix,st7715r - spi-max-frequency: - maximum: 32000000 - dc-gpios: maxItems: 1 description: Display data/command selection (D/CX) backlight: true reg: true + spi-max-frequency: true reset-gpios: true rotation: true @@ -48,7 +46,6 @@ required: - compatible - reg - dc-gpios - - reset-gpios additionalProperties: false @@ -72,6 +69,7 @@ examples: dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; rotation = <270>; + backlight = <&backlight>; }; }; diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml index 9baafd0c42dd..3fbd87c2c120 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -12,11 +12,22 @@ maintainers: properties: compatible: - enum: - - solomon,ssd1305fb-i2c - - solomon,ssd1306fb-i2c - - solomon,ssd1307fb-i2c - - solomon,ssd1309fb-i2c + oneOf: + # Deprecated compatible strings + - items: + - enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + deprecated: true + - items: + - enum: + - sinowealth,sh1106 + - solomon,ssd1305 + - solomon,ssd1306 + - solomon,ssd1307 + - solomon,ssd1309 reg: maxItems: 1 @@ -27,9 +38,20 @@ properties: reset-gpios: maxItems: 1 + # Only required for SPI + dc-gpios: + description: + GPIO connected to the controller's D/C# (Data/Command) pin, + that is needed for 4-wire SPI to tell the controller if the + data sent is for a command register or the display data RAM + maxItems: 1 + vbat-supply: description: The supply for VBAT + # Only required for SPI + spi-max-frequency: true + solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 default: 16 @@ -135,7 +157,21 @@ allOf: properties: compatible: contains: - const: solomon,ssd1305fb-i2c + const: sinowealth,sh1106 + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 5 + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1305-i2c + - solomon,ssd1305 then: properties: solomon,dclk-div: @@ -147,7 +183,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1306fb-i2c + enum: + - solomon,ssd1306-i2c + - solomon,ssd1306 then: properties: solomon,dclk-div: @@ -159,7 +197,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1307fb-i2c + enum: + - solomon,ssd1307-i2c + - solomon,ssd1307 then: properties: solomon,dclk-div: @@ -173,7 +213,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1309fb-i2c + enum: + - solomon,ssd1309-i2c + - solomon,ssd1309 then: properties: solomon,dclk-div: @@ -189,15 +231,15 @@ examples: #address-cells = <1>; #size-cells = <0>; - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; + ssd1307_i2c: oled@3c { + compatible = "solomon,ssd1307"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; }; - ssd1306: oled@3d { - compatible = "solomon,ssd1306fb-i2c"; + ssd1306_i2c: oled@3d { + compatible = "solomon,ssd1306"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; @@ -207,3 +249,30 @@ examples: solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; }; }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307_spi: oled@0 { + compatible = "solomon,ssd1307"; + reg = <0x0>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + + ssd1306_spi: oled@1 { + compatible = "solomon,ssd1306"; + reg = <0x1>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml index d0a5592bd89d..b3d5e1b96fae 100644 --- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml +++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml @@ -63,4 +63,3 @@ examples: compatible = "sprd,display-subsystem"; ports = <&dpu_out>; }; - diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml index 01e2da23790b..d6ea4d62a2cf 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -75,4 +75,3 @@ examples: }; ... - diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index b6e1ebfaf366..ff0a5c58d78c 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -20,9 +20,11 @@ properties: compatible: oneOf: - - const: allwinner,sun50i-a64-dma - - const: allwinner,sun50i-a100-dma - - const: allwinner,sun50i-h6-dma + - enum: + - allwinner,sun20i-d1-dma + - allwinner,sun50i-a64-dma + - allwinner,sun50i-a100-dma + - allwinner,sun50i-h6-dma - items: - const: allwinner,sun8i-r40-dma - const: allwinner,sun50i-a64-dma @@ -58,6 +60,7 @@ if: properties: compatible: enum: + - allwinner,sun20i-d1-dma - allwinner,sun50i-a100-dma - allwinner,sun50i-h6-dma diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml index b193ee2db4a7..b53ac7631a76 100644 --- a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml +++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera mSGDMA IP core maintainers: - - Olivier Dautricourt <olivier.dautricourt@orolia.com> + - Olivier Dautricourt <olivierdautricourt@gmail.com> description: | Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA) diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml index decab185cf4d..2bec69b308f8 100644 --- a/Documentation/devicetree/bindings/dma/arm,pl330.yaml +++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml @@ -55,6 +55,9 @@ properties: dma-coherent: true + power-domains: + maxItems: 1 + resets: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt index 7bd8847d6394..1c9929d53727 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt @@ -13,8 +13,10 @@ Required properties: - #dma-cells : Has to be 1. imx-dma does not support anything else. Optional properties: -- #dma-channels : Number of DMA channels supported. Should be 16. -- #dma-requests : Number of DMA requests supported. +- dma-channels : Number of DMA channels supported. Should be 16. +- #dma-channels : deprecated +- dma-requests : Number of DMA requests supported. +- #dma-requests : deprecated Example: @@ -23,7 +25,7 @@ Example: reg = <0x10001000 0x1000>; interrupts = <32 33>; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt index 8f7364a7b349..ec18bf0a802a 100644 --- a/Documentation/devicetree/bindings/dma/mmp-dma.txt +++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt @@ -10,10 +10,12 @@ Required properties: or one irq for pdma device Optional properties: -- #dma-channels: Number of DMA channels supported by the controller (defaults +- dma-channels: Number of DMA channels supported by the controller (defaults to 32 when not specified) -- #dma-requests: Number of DMA requestor lines supported by the controller +- #dma-channels: deprecated +- dma-requests: Number of DMA requestor lines supported by the controller (defaults to 32 when not specified) +- #dma-requests: deprecated "marvell,pdma-1.0" Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. @@ -33,7 +35,7 @@ pdma: dma-controller@d4000000 { reg = <0xd4000000 0x10000>; interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; interrupt-parent = <&intcmux32>; - #dma-channels = <16>; + dma-channels = <16>; }; /* @@ -45,7 +47,7 @@ pdma: dma-controller@d4000000 { compatible = "marvell,pdma-1.0"; reg = <0xd4000000 0x10000>; interrupts = <47>; - #dma-channels = <16>; + dma-channels = <16>; }; diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml new file mode 100644 index 000000000000..9dd1476d1849 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra GPC DMA Controller Device Tree Bindings + +description: | + The Tegra General Purpose Central (GPC) DMA controller is used for faster + data transfers between memory to memory, memory to device and device to + memory. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Rajesh Gumasta <rgumasta@nvidia.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + oneOf: + - const: nvidia,tegra186-gpcdma + - items: + - const: nvidia,tegra194-gpcdma + - const: nvidia,tegra186-gpcdma + + "#dma-cells": + const: 1 + + reg: + maxItems: 1 + + interrupts: + description: + Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. + minItems: 1 + maxItems: 31 + + resets: + maxItems: 1 + + reset-names: + const: gpcdma + + iommus: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + - resets + - reset-names + - "#dma-cells" + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/reset/tegra186-reset.h> + + dma-controller@2600000 { + compatible = "nvidia,tegra186-gpcdma"; + reg = <0x2600000 0x210000>; + resets = <&bpmp TEGRA186_RESET_GPCDMA>; + reset-names = "gpcdma"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&smmu TEGRA186_SID_GPCDMA_0>; + dma-coherent; + }; +... diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index d09d79d7406a..7d2fc4eb5530 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -19,9 +19,12 @@ allOf: properties: compatible: enum: + - qcom,sc7280-gpi-dma - qcom,sdm845-gpi-dma - qcom,sm8150-gpi-dma - qcom,sm8250-gpi-dma + - qcom,sm8350-gpi-dma + - qcom,sm8450-gpi-dma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index 7c6badf39921..7202cd68e759 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -42,11 +42,10 @@ properties: - const: renesas,rcar-dmac - items: - - const: renesas,dmac-r8a779a0 # R-Car V3U - - - items: - - const: renesas,dmac-r8a779f0 # R-Car S4-8 - - const: renesas,rcar-gen4-dmac + - enum: + - renesas,dmac-r8a779a0 # R-Car V3U + - renesas,dmac-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-dmac # R-Car Gen4 reg: true @@ -121,7 +120,6 @@ if: compatible: contains: enum: - - renesas,dmac-r8a779a0 - renesas,rcar-gen4-dmac then: properties: diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml new file mode 100644 index 000000000000..d83013b0dd74 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 DMA mux + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +allOf: + - $ref: "dma-router.yaml#" + +properties: + compatible: + const: renesas,rzn1-dmamux + + reg: + maxItems: 1 + description: DMA mux first register offset within the system control parent. + + '#dma-cells': + const: 6 + description: + The first four cells are dedicated to the master DMA controller. The fifth + cell gives the DMA mux bit index that must be set starting from 0. The + sixth cell gives the binary value that must be written there, ie. 0 or 1. + + dma-masters: + minItems: 1 + maxItems: 2 + + dma-requests: + const: 32 + +required: + - reg + - dma-requests + +additionalProperties: false + +examples: + - | + dma-router@a0 { + compatible = "renesas,rzn1-dmamux"; + reg = <0xa0 4>; + #dma-cells = <6>; + dma-masters = <&dma0 &dma1>; + dma-requests = <32>; + }; diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index 47c46af25536..3271755787b4 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -28,7 +28,15 @@ allOf: properties: compatible: items: - - const: sifive,fu540-c000-pdma + - enum: + - sifive,fu540-c000-pdma + - const: sifive,pdma0 + description: + Should be "sifive,<chip>-pdma" and "sifive,pdma<version>". + Supported compatible strings are - + "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the + SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block + with no chip integration tweaks. reg: maxItems: 1 @@ -37,6 +45,12 @@ properties: minItems: 1 maxItems: 8 + dma-channels: + description: For backwards-compatibility, the default value is 4 + minimum: 1 + maximum: 4 + default: 4 + '#dma-cells': const: 1 @@ -50,8 +64,9 @@ unevaluatedProperties: false examples: - | dma-controller@3000000 { - compatible = "sifive,fu540-c000-pdma"; + compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; reg = <0x3000000 0x8000>; + dma-channels = <4>; interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>; #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index 6b35089ac017..c13649bf7f19 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -15,7 +15,13 @@ allOf: properties: compatible: - const: snps,dma-spear1340 + oneOf: + - const: snps,dma-spear1340 + - items: + - enum: + - renesas,r9a06g032-dma + - const: renesas,rzn1-dma + "#dma-cells": minimum: 3 diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt index adccea9941f1..c7e9b5fd50e7 100644 --- a/Documentation/devicetree/bindings/dma/sprd-dma.txt +++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt @@ -8,10 +8,13 @@ Required properties: - interrupts: Should contain one interrupt shared by all channel. - #dma-cells: must be <1>. Used to represent the number of integer cells in the dmas property of client device. -- #dma-channels : Number of DMA channels supported. Should be 32. +- dma-channels : Number of DMA channels supported. Should be 32. - clock-names: Should contain the clock of the DMA controller. - clocks: Should contain a clock specifier for each entry in clock-names. +Deprecated properties: +- #dma-channels : Number of DMA channels supported. Should be 32. + Example: Controller: @@ -20,7 +23,7 @@ apdma: dma-controller@20100000 { reg = <0x20100000 0x4000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; + dma-channels = <32>; clock-names = "enable"; clocks = <&clk_ap_ahb_gates 5>; }; diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml index 7b1833d6caa2..1e1d8549b7ef 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml @@ -51,4 +51,3 @@ examples: }; ... - diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml index 87b4afd2cf62..00cfa3913652 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml @@ -104,4 +104,3 @@ examples: }; ... - diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index 325aca52cd43..d1700a5c36bf 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -110,7 +110,11 @@ axi_vdma_0: axivdma@40030000 { Required properties: - dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs, where Channel ID is '0' for write/tx and '1' for read/rx - channel. + channel. For MCMDA, MM2S channel(write/tx) ID start from + '0' and is in [0-15] range. S2MM channel(read/rx) ID start + from '16' and is in [16-31] range. These channels ID are + fixed irrespective of IP configuration. + - dma-names: a list of DMA channel names, one per "dmas" entry Example: diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml new file mode 100644 index 000000000000..b7e68b0dfa13 --- /dev/null +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek mt8195 DSP core + +maintainers: + - YC Hung <yc.hung@mediatek.com> + +description: | + Some boards from mt8195 contain a DSP core used for + advanced pre- and post- audio processing. + +properties: + compatible: + const: mediatek,mt8195-dsp + + reg: + items: + - description: Address and size of the DSP Cfg registers + - description: Address and size of the DSP SRAM + + reg-names: + items: + - const: cfg + - const: sram + + clocks: + items: + - description: mux for audio dsp clock + - description: 26M clock + - description: mux for audio dsp local bus + - description: default audio dsp local bus clock source + - description: clock gate for audio dsp clock + - description: mux for audio dsp access external bus + + clock-names: + items: + - const: adsp_sel + - const: clk26m_ck + - const: audio_local_bus + - const: mainpll_d7_d2 + - const: scp_adsp_audiodsp + - const: audio_h + + power-domains: + maxItems: 1 + + mboxes: + items: + - description: ipc reply between host and audio DSP. + - description: ipc request between host and audio DSP. + + mbox-names: + items: + - const: mbox0 + - const: mbox1 + + memory-region: + items: + - description: dma buffer between host and DSP. + - description: DSP system memory. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - memory-region + - power-domains + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + dsp@10803000 { + compatible = "mediatek,mt8195-dsp"; + reg = <0x10803000 0x1000>, + <0x10840000 0x40000>; + reg-names = "cfg", "sram"; + clocks = <&topckgen 10>, //CLK_TOP_ADSP + <&clk26m>, + <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS + <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2 + <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP + <&topckgen 34>; //CLK_TOP_AUDIO_H + clock-names = "adsp_sel", + "clk26m_ck", + "audio_local_bus", + "mainpll_d7_d2", + "scp_adsp_audiodsp", + "audio_h"; + memory-region = <&adsp_dma_mem_reserved>, + <&adsp_mem_reserved>; + power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP + mbox-names = "mbox0", "mbox1"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + }; diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt deleted file mode 100644 index c94acbb8cb0c..000000000000 --- a/Documentation/devicetree/bindings/eeprom/at24.txt +++ /dev/null @@ -1 +0,0 @@ -This file has been moved to at24.yaml. diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 6b61a8cf6137..d14e0accbda8 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -120,7 +120,9 @@ properties: - const: giantec,gt24c32a - const: atmel,24c32 - items: - - const: renesas,r1ex24128 + - enum: + - renesas,r1ex24128 + - samsung,s524ad0xd1 - const: atmel,24c128 label: diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 80a28781845d..8e1a8b19d429 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -249,13 +249,13 @@ examples: # be overridden or an appropriate parent bus node should be shown (such as on # i2c buses). # - # Any includes used have to be explicitly included. + # Any includes used have to be explicitly included. Use 4-space indentation. - | node@1000 { - compatible = "vendor,soc4-ip", "vendor,soc1-ip"; - reg = <0x1000 0x80>, - <0x3000 0x80>; - reg-names = "core", "aux"; - interrupts = <10>; - interrupt-controller; + compatible = "vendor,soc4-ip", "vendor,soc1-ip"; + reg = <0x1000 0x80>, + <0x3000 0x80>; + reg-names = "core", "aux"; + interrupts = <10>; + interrupt-controller; }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index b1cd4ad1889a..0f4e5ab26477 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -19,6 +19,7 @@ Required properties: * "qcom,scm-msm8953" * "qcom,scm-msm8960" * "qcom,scm-msm8974" + * "qcom,scm-msm8976" * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998" @@ -37,7 +38,7 @@ Required properties: * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and "qcom,scm-msm8960" * core, iface and bus clocks required for "qcom,scm-apq8084", - "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974" + "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. - qcom,dload-mode: phandle to the TCSR hardware block and offset of the diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml new file mode 100644 index 000000000000..e62b30386ac2 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4751 family GNSS Receiver Device Tree Bindings + +maintainers: + - Johan Hovold <johan@kernel.org> + - Linus Walleij <linus.walleij@linaro.org> + +description: + Broadcom GPS chips can be used over the UART or I2C bus. The UART + bus requires CTS/RTS support. The number of the capsule is more + elaborate than the compatibles BCM4751 may be printed + BCM4751IFBG for example. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + enum: + - brcm,bcm4751 + - brcm,bcm4752 + - brcm,bcm4753 + + reg: + description: + The I2C Address, not required on UART buses. + + vdd-auxin-supply: + description: + Main voltage supply, pin name VDD_AUXIN, typically connected + directly to a battery such as LiIon 3.8V battery or a 2.6V supply. + + vddio-supply: + description: + IO voltage supply, pin name VDDIO, typically 1.8V + + reset-gpios: + maxItems: 1 + description: An optional active low reset line, should be flagged with + GPIO_ACTIVE_LOW. + + enable-gpios: + description: Enable GPIO line, connected to pins named REGPU or NSTANDBY. + If the line is active low such as NSTANDBY, it should be tagged + GPIO_ACTIVE_LOW. + +required: + - compatible + - enable-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + gnss { + compatible = "brcm,bcm4751"; + vdd-auxin-supply = <&vbat>; + reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + current-speed = <38400>; + }; + }; diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt deleted file mode 100644 index 80cb802813c5..000000000000 --- a/Documentation/devicetree/bindings/gnss/mediatek.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek-based GNSS Receiver DT binding - -Mediatek chipsets are used in GNSS-receiver modules produced by several -vendors and can use a UART interface. - -Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic -properties. - -Required properties: - -- compatible : Must be - - "globaltop,pa6h" - -- vcc-supply : Main voltage regulator (pin name: VCC) - -Optional properties: - -- current-speed : Default UART baud rate -- gnss-fix-gpios : GPIO used to determine device position fix state - (pin name: FIX, 3D_FIX) -- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET) -- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS) -- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP) - -Example: - -serial@1234 { - compatible = "ns16550a"; - - gnss { - compatible = "globaltop,pa6h"; - vcc-supply = <&vcc_3v3>; - }; -}; diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml new file mode 100644 index 000000000000..45cf01b27700 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gnss/mediatek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek GNSS Receiver Device Tree Bindings + +maintainers: + - Johan Hovold <johan@kernel.org> + +description: + Mediatek chipsets are used in GNSS-receiver modules produced by several + vendors and can use a UART interface. + +allOf: + - $ref: gnss-common.yaml# + +properties: + compatible: + const: globaltop,pa6h + + vcc-supply: + description: + Main voltage regulator, pin name VCC. + + reset-gpios: + maxItems: 1 + description: An optional reset line, with names such as RESET or NRESET. + If the line is active low it should be flagged with GPIO_ACTIVE_LOW. + + timepulse-gpios: + description: Comes with pin names such as PPS1 or 1PPS. + + gnss-fix-gpios: + maxItems: 1 + description: GPIO used to determine device position fix state, pin names + FIX or 3D_FIX. + + vbackup-supply: + description: + Regulator providing backup voltage, pin names such as VBAT or VBACKUP. + +required: + - compatible + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&vcc_3v3>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml index 5fe19fa5f67c..a99e7842ca17 100644 --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -26,6 +26,7 @@ properties: const: 2 registers-number: + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of daisy-chained shift registers enable-gpios: diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml new file mode 100644 index 000000000000..40d0be31e200 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common GPIO lines + +maintainers: + - Bartosz Golaszewski <brgl@bgdev.pl> + - Linus Walleij <linus.walleij@linaro.org> + +description: + Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs + using inverted signal (e.g. RESETN). + +select: true + +properties: + enable-gpios: + maxItems: 1 + description: + GPIO connected to the enable control pin. + + reset-gpios: + description: + GPIO (or GPIOs for power sequence) connected to the device reset pin + (e.g. RESET or RESETN). + + powerdown-gpios: + maxItems: 1 + description: + GPIO connected to the power down pin (hardware power down or power cut, + e.g. PD or PWDN). + + pwdn-gpios: + maxItems: 1 + description: Use powerdown-gpios + deprecated: true + + wakeup-gpios: + maxItems: 1 + description: + GPIO connected to the pin waking up the device from suspend or other + power-saving modes. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mmc-pwrseq-simple + then: + properties: + reset-gpios: + minItems: 1 + maxItems: 32 + else: + properties: + reset-gpios: + maxItems: 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index dc0fc8fc4839..977b14db09b0 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -30,6 +30,7 @@ properties: - maxim,max7325 - maxim,max7326 - maxim,max7327 + - nxp,pca6408 - nxp,pca6416 - nxp,pca9505 - nxp,pca9506 diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml index 100f20cebd76..39fd959c45d2 100644 --- a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml @@ -28,10 +28,11 @@ properties: - enum: - realtek,rtl8380-gpio - realtek,rtl8390-gpio + - realtek,rtl9300-gpio + - realtek,rtl9310-gpio - const: realtek,otto-gpio - reg: - maxItems: 1 + reg: true "#gpio-cells": const: 2 @@ -50,6 +51,23 @@ properties: interrupts: maxItems: 1 +if: + properties: + compatible: + contains: + const: realtek,rtl9300-gpio +then: + properties: + reg: + items: + - description: GPIO and interrupt control + - description: interrupt CPU map +else: + properties: + reg: + items: + - description: GPIO and interrupt control + required: - compatible - reg @@ -74,5 +92,17 @@ examples: interrupt-parent = <&rtlintc>; interrupts = <23>; }; + - | + gpio@3300 { + compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio"; + reg = <0x3300 0x1c>, <0x3338 0x8>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&rtlintc>; + interrupts = <13>; + }; ... diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml index f2541739ee3b..0681a4790cd6 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml @@ -51,6 +51,11 @@ properties: - items: - const: renesas,gpio-r8a779a0 # R-Car V3U + - items: + - enum: + - renesas,gpio-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-gpio # R-Car Gen4 + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml index bcafa494ed7a..228fa27ffdc3 100644 --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -52,6 +52,23 @@ properties: <child-interrupt-base parent-interrupt-base length> triplets. $ref: /schemas/types.yaml#/definitions/uint32-matrix +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + properties: + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml index 62486f55177d..d60626ffb28e 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -53,4 +53,3 @@ examples: clocks = <&clock 278>; clock-names = "rotator"; }; - diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt deleted file mode 100644 index 70cd58608f4b..000000000000 --- a/Documentation/devicetree/bindings/h8300/cpu.txt +++ /dev/null @@ -1,13 +0,0 @@ -* H8/300 CPU bindings - -Required properties: - -- compatible: Compatible property value should be "renesas,h8300". -- clock-frequency: Contains the clock frequency for CPU, in Hz. - -Example: - - cpu@0 { - compatible = "renesas,h8300"; - clock-frequency = <20000000>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index 22beb37f1bf1..56baf2e5c6d1 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -103,4 +103,3 @@ examples: adi,pin14-function = "tach4"; }; }; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml index bd67b0766599..0cdc3e890df7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml @@ -36,4 +36,3 @@ examples: }; }; ... - diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt deleted file mode 100644 index 026985b8f61a..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +++ /dev/null @@ -1,53 +0,0 @@ -* MediaTek's I2C controller - -The MediaTek's I2C controller is used to interface with I2C devices. - -Required properties: - - compatible: value should be either of the following. - "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701 - "mediatek,mt2712-i2c": for MediaTek MT2712 - "mediatek,mt6577-i2c": for MediaTek MT6577 - "mediatek,mt6589-i2c": for MediaTek MT6589 - "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797 - "mediatek,mt7622-i2c": for MediaTek MT7622 - "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 - "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 - "mediatek,mt8168-i2c": for MediaTek MT8168 - "mediatek,mt8173-i2c": for MediaTek MT8173 - "mediatek,mt8183-i2c": for MediaTek MT8183 - "mediatek,mt8186-i2c": for MediaTek MT8186 - "mediatek,mt8192-i2c": for MediaTek MT8192 - "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195 - "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 - - reg: physical base address of the controller and dma base, length of memory - mapped region. - - interrupts: interrupt number to the cpu. - - clock-div: the fixed value for frequency divider of clock source in i2c - module. Each IC may be different. - - clocks: clock name from clock manager - - clock-names: Must include "main" and "dma", "arb" is for multi-master that - one bus has more than two i2c controllers, if enable have-pmic need include - "pmic" extra. - -Optional properties: - - clock-frequency: Frequency in Hz of the bus when transfer, the default value - is 100000. - - mediatek,have-pmic: platform can control i2c form special pmic side. - Only mt6589 and mt8135 support this feature. - - mediatek,use-push-pull: IO config use push-pull mode. - - vbus-supply: phandle to the regulator that provides power to SCL/SDA. - -Example: - - i2c0: i2c@1100d000 { - compatible = "mediatek,mt6577-i2c"; - reg = <0x1100d000 0x70>, - <0x11000300 0x80>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; - clock-frequency = <400000>; - mediatek,have-pmic; - clock-div = <16>; - clocks = <&i2c0_ck>, <&ap_dma_ck>; - clock-names = "main", "dma"; - }; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml new file mode 100644 index 000000000000..16a1a3118204 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek I2C controller + +description: + This driver interfaces with the native I2C controller present in + various MediaTek SoCs. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +maintainers: + - Qii Wang <qii.wang@mediatek.com> + +properties: + compatible: + oneOf: + - const: mediatek,mt2712-i2c + - const: mediatek,mt6577-i2c + - const: mediatek,mt6589-i2c + - const: mediatek,mt7622-i2c + - const: mediatek,mt8168-i2c + - const: mediatek,mt8173-i2c + - const: mediatek,mt8183-i2c + - const: mediatek,mt8186-i2c + - const: mediatek,mt8192-i2c + - items: + - enum: + - mediatek,mt7629-i2c + - mediatek,mt8516-i2c + - const: mediatek,mt2712-i2c + - items: + - enum: + - mediatek,mt2701-i2c + - mediatek,mt6797-i2c + - mediatek,mt7623-i2c + - const: mediatek,mt6577-i2c + - items: + - enum: + - mediatek,mt8195-i2c + - const: mediatek,mt8192-i2c + + reg: + items: + - description: Physical base address + - description: DMA base address + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: Main clock for I2C bus + - description: Clock for I2C via DMA + - description: Bus arbitrator clock + - description: Clock for I2C from PMIC + + clock-names: + minItems: 2 + items: + - const: main + - const: dma + - const: arb + - const: pmic + + clock-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Frequency divider of clock source in I2C module + + clock-frequency: + default: 100000 + description: + SCL frequency to use (in Hz). If omitted, 100kHz is used. + + mediatek,have-pmic: + description: Platform controls I2C from PMIC side + type: boolean + + mediatek,use-push-pull: + description: Use push-pull mode I/O config + type: boolean + + vbus-supply: + description: Phandle to the regulator providing power to SCL/SDA + +required: + - compatible + - reg + - clocks + - clock-names + - clock-div + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0: i2c@1100d000 { + compatible = "mediatek,mt6577-i2c"; + reg = <0x1100d000 0x70>, <0x11000300 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clocks = <&i2c0_ck>, <&ap_dma_ck>; + clock-names = "main", "dma"; + clock-div = <16>; + clock-frequency = <400000>; + mediatek,have-pmic; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml index 9b0603a72f40..b6af924dee2e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml @@ -28,7 +28,6 @@ description: |+ '------------' '-----' '-----' '-----' - allOf: - $ref: /schemas/i2c/i2c-mux.yaml# diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml new file mode 100644 index 000000000000..0e7ed00562e2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Geni based QUP I2C Controller + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: qcom,geni-i2c + + clocks: + maxItems: 1 + + clock-names: + const: se + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + - const: qup-memory + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + required-opps: + maxItems: 1 + +required: + - compatible + - interrupts + - clocks + - clock-names + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + i2c@88000 { + compatible = "qcom,geni-i2c"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt deleted file mode 100644 index dc71754a56af..000000000000 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt +++ /dev/null @@ -1,40 +0,0 @@ -Qualcomm Universal Peripheral (QUP) I2C controller - -Required properties: - - compatible: Should be: - * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064. - * "qcom,i2c-qup-v2.1.1" for 8974 v1. - * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later. - - reg: Should contain QUP register address and length. - - interrupts: Should contain I2C interrupt. - - - clocks: A list of phandles + clock-specifiers, one for each entry in - clock-names. - - clock-names: Should contain: - * "core" for the core clock - * "iface" for the AHB clock - - - #address-cells: Should be <1> Address cells for i2c device address - - #size-cells: Should be <0> as i2c addresses have no size component - -Optional properties: - - clock-frequency: Should specify the desired i2c bus clock frequency in Hz, - defaults to 100kHz if omitted. - -Child nodes should conform to i2c bus binding. - -Example: - - i2c@f9924000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9924000 0x1000>; - interrupts = <0 96 0>; - - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - - clock-frequency = <355000>; - - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml new file mode 100644 index 000000000000..f43947514d48 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) I2C controller + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - qcom,i2c-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,i2c-qup-v2.1.1 # for 8974 v1 + - qcom,i2c-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + reg: + maxItems: 1 + +required: + - compatible + - clock-names + - clocks + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index f4b235a87ac6..2f315489aaae 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -19,6 +19,7 @@ properties: - enum: - renesas,riic-r7s72100 # RZ/A1H - renesas,riic-r7s9210 # RZ/A2M + - renesas,riic-r9a07g043 # RZ/G2UL - renesas,riic-r9a07g044 # RZ/G2{L,LC} - renesas,riic-r9a07g054 # RZ/V2L - const: renesas,riic-rz # RZ/A or RZ/G2L @@ -75,6 +76,7 @@ if: compatible: contains: enum: + - renesas,riic-r9a07g043 - renesas,riic-r9a07g044 - renesas,riic-r9a07g054 then: diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml index c26230518957..3d5782deb97d 100644 --- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -123,7 +123,7 @@ examples: samsung,i2c-slave-addr = <0x66>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml index 930f9e3904d7..0b2f5dc80600 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml @@ -44,4 +44,3 @@ examples: }; }; ... - diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml index e51a585bd5a3..133b0f867992 100644 --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -41,7 +41,7 @@ examples: spi { #address-cells = <1>; #size-cells = <0>; - + dac@0 { compatible = "lltc,ltc1660"; reg = <0>; diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index d74f2002409e..3399fc288afb 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -18,10 +18,20 @@ properties: - items: - const: allwinner,sun50i-a64-lradc - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-r329-lradc + - items: + - const: allwinner,sun20i-d1-lradc + - const: allwinner,sun50i-r329-lradc reg: maxItems: 1 + clocks: + maxItems: 1 + + resets: + maxItems: 1 + interrupts: maxItems: 1 @@ -68,6 +78,18 @@ required: - interrupts - vref-supply +if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-r329-lradc + +then: + required: + - clocks + - resets + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml new file mode 100644 index 000000000000..a3a1e5a65306 --- /dev/null +++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml @@ -0,0 +1,960 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS7222A/B/C Capacitive Touch Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch + controllers that feature additional sensing capabilities. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + + reg: + maxItems: 1 + + irq-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low RDY output. + + reset-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low MCLR input. The + device is temporarily held in hardware reset prior to initialization if + this property is present. + + azoteq,rf-filt-enable: + type: boolean + description: Enables the device's internal RF filter. + + azoteq,max-counts: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the maximum number of conversion periods (counts) that can be + reported as follows: + 0: 1023 + 1: 2047 + 2: 4095 + 3: 16384 + + azoteq,auto-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the number of conversions to occur before an interrupt is + generated as follows: + 0: 4 + 1: 8 + 2: 16 + 3: 32 + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI fine fractional divider. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI coarse fractional divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the preloaded ATI compensation selection. + + azoteq,lta-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + low-power mode. + + azoteq,lta-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + normal-power mode. + + azoteq,counts-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during low-power + mode. + + azoteq,counts-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during normal- + power mode. + + azoteq,lta-fast-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during low-power mode. + + azoteq,lta-fast-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during normal-power mode. + + azoteq,timeout-ati-ms: + multipleOf: 500 + minimum: 0 + maximum: 32767500 + description: + Specifies the delay (in ms) before ATI is retried following an ATI error. + + azoteq,rate-ati-ms: + minimum: 0 + maximum: 65535 + description: Specifies the rate (in ms) at which ATI status is evaluated. + + azoteq,timeout-np-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,timeout-lp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from low-power mode to ultra-low-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,timeout-ulp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the rate (in ms) at which channels not regularly sampled during + ultra-low-power mode are updated. + + azoteq,rate-ulp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during ultra-low-power mode. + +patternProperties: + "^cycle-[0-9]$": + type: object + description: Represents a conversion cycle serving two sensing channels. + + properties: + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion frequency fraction. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + minimum: 0 + maximum: 8 + description: Specifies the CTx pin(s) associated with the cycle. + + azoteq,rx-float-inactive: + type: boolean + description: Floats any inactive CRx pins instead of grounding them. + + azoteq,dead-time-enable: + type: boolean + description: + Increases the denominator of the conversion frequency formula by one. + + azoteq,tx-freq-fosc: + type: boolean + description: + Fixes the conversion frequency to that of the device's core clock. + + azoteq,vbias-enable: + type: boolean + description: Enables the bias voltage for use during inductive sensing. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the cycle's sensing mode as follows: + 0: None + 1: Self capacitive + 2: Mutual capacitive + 3: Inductive + + Note that in the case of IQS7222A, cycles 5 and 6 are restricted to + Hall-effect sensing. + + azoteq,iref-enable: + type: boolean + description: + Enables the current reference for use during various sensing modes. + + azoteq,iref-level: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference level. + + azoteq,iref-trim: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference trim. + + dependencies: + azoteq,iref-level: ["azoteq,iref-enable"] + azoteq,iref-trim: ["azoteq,iref-enable"] + + additionalProperties: false + + "^channel-([0-9]|1[0-9])$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + Note that in the case of IQS7222A, channels 10 and 11 are restricted to + Hall-effect sensing with events reported on channel 10 only. + + properties: + azoteq,ulp-allow: + type: boolean + description: + Permits the device to enter ultra-low-power mode while the channel + lies in a state of touch or proximity. + + azoteq,ref-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 9 + description: Specifies a separate reference channel to be followed. + + azoteq,ref-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the relative weight of the reference channel. + + azoteq,use-prox: + type: boolean + description: + Activates the reference channel in response to proximity events + instead of touch events. + + azoteq,ati-band: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI band as a fraction of its ATI target as + follows: + 0: 1/16 + 1: 1/8 + 2: 1/4 + 3: 1/2 + + azoteq,global-halt: + type: boolean + description: + Specifies that the channel's long-term average is to freeze if any + other participating channel lies in a proximity or touch state. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity and touch + events relative to their respective thresholds. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 7 + description: Specifies the CRx pin(s) associated with the channel. + + azoteq,samp-cap-double: + type: boolean + description: Doubles the sampling capacitance from 40 pF to 80 pF. + + azoteq,vref-half: + type: boolean + description: Halves the discharge threshold from 1.0 V to 0.5 V. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the bias current applied during mutual (projected) + capacitive sensing as follows: + 0: 2 uA + 1: 5 uA + 2: 7 uA + 3: 10 uA + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 2040 + description: Specifies the channel's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 496 + description: Specifies the channel's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Compensation + 2: Compensation divider + 3: Fine fractional divider + 4: Coarse fractional divider + 5: Full + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI compensation divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the channel's ATI compensation selection. + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce exit factor. + + patternProperties: + "^event-(prox|touch)$": + type: object + description: + Represents a proximity or touch event reported by the channel. + + properties: + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 (IQS7222C only) + 2: GPIO4 (IQS7222C only) + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the threshold for the event. Valid entries range from + 0-127 and 0-255 for proximity and touch events, respectively. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the hysteresis for the event (touch events only). + + azoteq,timeout-press-ms: + multipleOf: 500 + minimum: 0 + maximum: 127500 + description: + Specifies the length of time (in ms) to wait before automatically + releasing a press event. Specify zero to allow the press state to + persist indefinitely. + + The IQS7222B does not feature channel-specific timeouts; the time- + out specified for any one channel applies to all channels. + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Numeric key or switch code associated with the event. Specify + KEY_RESERVED (0) to opt out of event reporting. + + linux,input-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 5] + default: 1 + description: + Specifies whether the event is to be interpreted as a key (1) + or a switch (5). + + required: + - linux,code + + additionalProperties: false + + dependencies: + azoteq,ref-weight: ["azoteq,ref-select"] + azoteq,use-prox: ["azoteq,ref-select"] + + additionalProperties: false + + "^slider-[0-1]$": + type: object + description: Represents a slider comprising three or four channels. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 4 + items: + minimum: 0 + maximum: 9 + description: + Specifies the order of the channels that participate in the slider. + + azoteq,slider-size: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the slider's one-dimensional resolution, equal to the + maximum coordinate plus one. + + azoteq,lower-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's lower starting point. + + azoteq,upper-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's upper starting point. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the speed of movement after which coordinate filtering is + no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the speed of movement after which coordinate filtering is + linearly reduced. + + azoteq,bottom-beta: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: + Specifies the coordinate filter damping factor to be applied + while the speed of movement is below that which is specified + by azoteq,bottom-speed. + + azoteq,static-beta: + type: boolean + description: + Applies the coordinate filter damping factor specified by + azoteq,bottom-beta regardless of the speed of movement. + + azoteq,use-prox: + type: boolean + description: + Directs the slider to respond to the proximity states of the selected + channels instead of their corresponding touch states. Note the slider + cannot report granular coordinates during a state of proximity. + + linux,axis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the absolute axis to which coordinates are mapped. Specify + ABS_WHEEL to operate the slider as a wheel (IQS7222C only). + + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + type: object + description: + Represents a press or gesture (IQS7222A only) event reported by + the slider. + + properties: + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric key code associated with the event. + + azoteq,gesture-max-ms: + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all remaining swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 4 + minimum: 0 + maximum: 124 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the distance across which a swipe or flick gesture must + travel in order to be acknowledged by the device. The number spec- + ified for any one swipe or flick gesture applies to all remaining + swipe or flick gestures. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 1 + items: + minimum: 0 + maximum: 0 + description: | + Specifies an individual GPIO mapped to a tap, swipe or flick + gesture as follows: + 0: GPIO0 + 1: GPIO3 (reserved) + 2: GPIO4 (reserved) + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + required: + - linux,code + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + + "^gpio-[0-2]$": + type: object + description: | + Represents a GPIO mapped to one or more events as follows: + gpio-0: GPIO0 + gpio-1: GPIO3 (IQS7222C only) + gpio-2: GPIO4 (IQS7222C only) + + allOf: + - $ref: ../pinctrl/pincfg-node.yaml# + + properties: + drive-open-drain: true + + additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222b + + then: + patternProperties: + "^cycle-[0-9]$": + properties: + azoteq,iref-enable: false + + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ref-select: false + + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: false + + "^slider-[0-1]$": false + + "^gpio-[0-2]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222a + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: + maxItems: 1 + items: + maximum: 0 + + "^slider-[0-1]$": + properties: + azoteq,slider-size: + multipleOf: 16 + maximum: 4080 + + azoteq,top-speed: + multipleOf: 4 + maximum: 1020 + + else: + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ulp-allow: false + + "^slider-[0-1]$": + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + properties: + azoteq,gesture-max-ms: false + + azoteq,gesture-min-ms: false + + azoteq,gesture-dist: false + + azoteq,gpio-select: false + +required: + - compatible + - reg + - irq-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs7222a@44 { + compatible = "azoteq,iqs7222a"; + reg = <0x44>; + irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + azoteq,lta-beta-lp = <7>; + azoteq,lta-beta-np = <8>; + azoteq,counts-beta-lp = <2>; + azoteq,counts-beta-np = <3>; + azoteq,lta-fast-beta-lp = <3>; + azoteq,lta-fast-beta-np = <4>; + + cycle-0 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>, <2>, <4>, <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-1 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-2 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <4>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-3 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <2>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-4 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-5 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + cycle-6 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + channel-0 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <800>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-1 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-2 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-3 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-4 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-5 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <800>; + azoteq,ati-base = <144>; + azoteq,ati-mode = <5>; + }; + + channel-6 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_MUTE>; + }; + }; + + channel-7 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + channel-8 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_VOLUMEUP>; + }; + }; + + channel-9 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_POWER>; + }; + }; + + channel-10 { + azoteq,ulp-allow; + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + + event-touch { + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + }; + }; + + channel-11 { + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + }; + + slider-0 { + azoteq,channel-select = <1>, <2>, <3>, <4>; + azoteq,slider-size = <4080>; + azoteq,upper-cal = <50>; + azoteq,lower-cal = <30>; + azoteq,top-speed = <200>; + azoteq,bottom-speed = <1>; + azoteq,bottom-beta = <3>; + + event-tap { + linux,code = <KEY_PLAYPAUSE>; + azoteq,gesture-max-ms = <600>; + azoteq,gesture-min-ms = <24>; + }; + + event-flick-pos { + linux,code = <KEY_NEXTSONG>; + azoteq,gesture-max-ms = <600>; + azoteq,gesture-dist = <816>; + }; + + event-flick-neg { + linux,code = <KEY_PREVIOUSSONG>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml index e8f137abb03c..e05690b3e963 100644 --- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml @@ -15,14 +15,16 @@ description: | Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on a separate EC (Embedded Controller) device. It provides a message for reading key scans from the EC. These are then converted - into keycodes for processing by the kernel. - -allOf: - - $ref: "/schemas/input/matrix-keymap.yaml#" + into keycodes for processing by the kernel. This device also supports + switches/buttons like power and volume buttons. properties: compatible: - const: google,cros-ec-keyb + oneOf: + - description: ChromeOS EC with only buttons/switches + const: google,cros-ec-keyb-switches + - description: ChromeOS EC with keyboard and possibly buttons/switches + const: google,cros-ec-keyb google,needs-ghost-filter: description: @@ -31,6 +33,7 @@ properties: type: boolean function-row-physmap: + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 15 description: | @@ -41,15 +44,31 @@ properties: where the lower 16 bits are reserved. This property is specified only when the keyboard has a custom design for the top row keys. +dependencies: + function-row-phsymap: [ 'linux,keymap' ] + google,needs-ghost-filter: [ 'linux,keymap' ] + required: - compatible +if: + properties: + compatible: + contains: + const: google,cros-ec-keyb +then: + $ref: "/schemas/input/matrix-keymap.yaml#" + required: + - keypad,num-rows + - keypad,num-columns + - linux,keymap + unevaluatedProperties: false examples: - | #include <dt-bindings/input/input.h> - cros-ec-keyb { + keyboard-controller { compatible = "google,cros-ec-keyb"; keypad,num-rows = <8>; keypad,num-columns = <13>; @@ -113,3 +132,9 @@ examples: /* UP LEFT */ 0x070b0067 0x070c0069>; }; + - | + /* No matrix keyboard, just buttons/switches */ + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +... diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt deleted file mode 100644 index cdcaa3f52d25..000000000000 --- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt +++ /dev/null @@ -1,27 +0,0 @@ -Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller - -Required properties: -- compatible: - ilitek,ili210x for ILI210x - ilitek,ili2117 for ILI2117 - ilitek,ili2120 for ILI2120 - ilitek,ili251x for ILI251x - -- reg: The I2C address of the device - -- interrupts: The sink for the touchscreen's IRQ output - See ../interrupt-controller/interrupts.txt - -Optional properties for main touchpad device: - -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) - -Example: - - touchscreen@41 { - compatible = "ilitek,ili251x"; - reg = <0x41>; - interrupt-parent = <&gpio4>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml index a190e7baac31..9f7328999756 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -15,6 +15,9 @@ allOf: properties: compatible: enum: + - ilitek,ili210x + - ilitek,ili2117 + - ilitek,ili2120 - ilitek,ili2130 - ilitek,ili2131 - ilitek,ili2132 @@ -22,11 +25,12 @@ properties: - ilitek,ili2322 - ilitek,ili2323 - ilitek,ili2326 + - ilitek,ili251x - ilitek,ili2520 - ilitek,ili2521 reg: - const: 0x41 + maxItems: 1 interrupts: maxItems: 1 @@ -50,7 +54,6 @@ required: - compatible - reg - interrupts - - reset-gpios examples: - | diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml index e23df4836c6f..eec987640b37 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml @@ -45,20 +45,20 @@ additionalProperties: false examples: # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node - # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml - | - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node - # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml - | #include <dt-bindings/interconnect/qcom,icc.h> - disp_bcm_voter: bcm_voter { + disp_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; qcom,tcs-wait = <QCOM_ICC_TAG_AMC>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt deleted file mode 100644 index 4d47df1a5c91..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Freescale Layerscape external IRQs - -Some Layerscape SOCs (LS1021A, LS1043A, LS1046A -LS1088A, LS208xA, LX216xA) support inverting -the polarity of certain external interrupt lines. - -The device node must be a child of the node representing the -Supplemental Configuration Unit (SCFG). - -Required properties: -- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq". - "fsl,ls1043a-extirq": for LS1043A, LS1046A. - "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA. -- #interrupt-cells: Must be 2. The first element is the index of the - external interrupt line. The second element is the trigger type. -- #address-cells: Must be 0. -- interrupt-controller: Identifies the node as an interrupt controller -- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in - the SCFG or the External Interrupt Control Register (IRQCR) in - the ISC. -- interrupt-map: Specifies the mapping from external interrupts to GIC - interrupts. -- interrupt-map-mask: Must be <0xffffffff 0>. - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg", "syscon"; - reg = <0x0 0x1570000 0x0 0x10000>; - big-endian; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x1570000 0x10000>; - - extirq: interrupt-controller@1ac { - compatible = "fsl,ls1021a-extirq"; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1ac 4>; - interrupt-map = - <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; - }; - }; - - - interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <&extirq 1 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml new file mode 100644 index 000000000000..887e565b9573 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape External Interrupt Controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA, + LX216xA) support inverting the polarity of certain external interrupt + lines. + +properties: + compatible: + oneOf: + - enum: + - fsl,ls1021a-extirq + - fsl,ls1043a-extirq + - fsl,ls1088a-extirq + - items: + - enum: + - fsl,ls1046a-extirq + - const: fsl,ls1043a-extirq + - items: + - enum: + - fsl,ls2080a-extirq + - fsl,lx2160a-extirq + - const: fsl,ls1088a-extirq + + '#interrupt-cells': + const: 2 + + '#address-cells': + const: 0 + + interrupt-controller: true + + reg: + maxItems: 1 + description: + Specifies the Interrupt Polarity Control Register (INTPCR) in the + SCFG or the External Interrupt Control Register (IRQCR) in the ISC. + + interrupt-map: + description: Specifies the mapping from external interrupts to GIC interrupts. + + interrupt-map-mask: true + +required: + - compatible + - '#interrupt-cells' + - '#address-cells' + - interrupt-controller + - reg + - interrupt-map + - interrupt-map-mask + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1021a-extirq + then: + properties: + interrupt-map: + minItems: 6 + maxItems: 6 + interrupt-map-mask: + items: + - const: 0x7 + - const: 0 + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1043a-extirq + - fsl,ls1046a-extirq + - fsl,ls1088a-extirq + - fsl,ls2080a-extirq + - fsl,lx2160a-extirq + then: + properties: + interrupt-map: + minItems: 12 + maxItems: 12 + interrupt-map-mask: + items: + - const: 0xf + - const: 0 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x7 0x0>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt index 98d89e53013d..159a423e5586 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt @@ -21,8 +21,10 @@ Properties: - "qcom,sc7180-pdc": For SC7180 - "qcom,sc7280-pdc": For SC7280 - "qcom,sdm845-pdc": For SDM845 - - "qcom,sdm8250-pdc": For SM8250 - - "qcom,sdm8350-pdc": For SM8350 + - "qcom,sm6350-pdc": For SM6350 + - "qcom,sm8150-pdc": For SM8150 + - "qcom,sm8250-pdc": For SM8250 + - "qcom,sm8350-pdc": For SM8350 - reg: Usage: required diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt deleted file mode 100644 index 56e8d82aff34..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* H8/300H Interrupt controller - -Required properties: - -- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback. -- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory -- regs: Base address of interrupt controller registers. - -Optional properties: - -- any properties, listed in interrupts.txt, and any standard resource allocation - properties - -Example: - - h8intc: interrupt-controller@fee012 { - compatible = "renesas,h8300h-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfee012 7>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt deleted file mode 100644 index faded2b1559b..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* H8S Interrupt controller - -Required properties: - -- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback. -- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory -- regs: Base address of interrupt controller registers. - -Optional properties: - -- any properties, listed in interrupts.txt, and any standard resource allocation - properties - -Example: - - h8intc: interrupt-controller@fffe00 { - compatible = "renesas,h8s-intc", "renesas,h8300-intc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xfffe00 24>; - }; diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml new file mode 100644 index 000000000000..1524fa3094ef --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/apple,sart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SART DMA address filter + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +description: + Apple SART is a simple address filter for DMA transactions. Regions of + physical memory must be added to the SART's allow list before any + DMA can target these. Unlike a proper IOMMU no remapping can be done and + special support in the consumer driver is required since not all DMA + transactions of a single device are subject to SART filtering. + + SART1 has first been used since at least the A11 (iPhone 8 and iPhone X) + and allows 36 bit of physical address space and filter entries with sizes + up to 24 bit. + + SART2, first seen in A14 and M1, allows 36 bit of physical address space + and filter entry size up to 36 bit. + + SART3, first seen in M1 Pro/Max, extends both the address space and filter + entry size to 42 bit. + +properties: + compatible: + enum: + - apple,t6000-sart + - apple,t8103-sart + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iommu@7bc50000 { + compatible = "apple,t8103-sart"; + reg = <0x7bc50000 0x4000>; + }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml index e87bfbcc6913..c57a53d87e4e 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml @@ -37,12 +37,18 @@ properties: hardware supports just a single, combined interrupt line. If provided, then the combined interrupt will be used in preference to any others. - - minItems: 2 + - minItems: 1 items: - - const: eventq # Event Queue not empty - - const: gerror # Global Error activated - - const: priq # PRI Queue not empty - - const: cmdq-sync # CMD_SYNC complete + - enum: + - eventq # Event Queue not empty + - gerror # Global Error activated + - const: gerror + - enum: + - cmdq-sync # CMD_SYNC complete + - priq # PRI Queue not empty + - enum: + - cmdq-sync + - priq '#iommu-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml index af51b91c893e..783c6b37c9f0 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml @@ -107,4 +107,3 @@ examples: power-domains = <&pd_gsc>; #iommu-cells = <0>; }; - diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 1c24b333c6e2..5d66c3e4def5 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -81,7 +81,7 @@ properties: description: | kHz; switching frequency. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] qcom,ovp: diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml index 10f95bf1d666..69e579226d9b 100644 --- a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml +++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml @@ -11,7 +11,7 @@ maintainers: description: | This module is part of the MT6360 MFD device. - see Documentation/devicetree/bindings/mfd/mt6360.yaml + see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode, and 4-channel RGB LED support Register/Flash/Breath Mode diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml index aa2b3bf56b57..ea06976fbbc7 100644 --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -51,4 +51,3 @@ examples: interrupts = <208>, <209>, <210>; #mbox-cells = <1>; }; - diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml index fe454a1fba17..72c1d9e82c89 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml @@ -11,14 +11,15 @@ maintainers: description: | The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC - to ommunicate with ADSP by passing messages through two mailbox channels. + to communicate with ADSP by passing messages through two mailbox channels. The MTK ADSP mailbox IPC also provides the ability for one processor to signal the other processor using interrupts. properties: compatible: - items: - - const: mediatek,mt8195-adsp-mbox + enum: + - mediatek,mt8195-adsp-mbox + - mediatek,mt8186-adsp-mbox "#mbox-cells": const: 0 diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml index 9f7a7296b57f..a3e87516d637 100644 --- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -26,6 +26,15 @@ description: | second cell is used to identify the mailbox that the client is going to use. + For shared mailboxes, the first cell composed of two fields: + - bits 15..8: + A bit mask of flags that further specifies the type of shared + mailbox to be used (based on the data size). If no flag is + specified then, 32-bit shared mailbox is used. + - bits 7..0: + Defines the type of the mailbox to be used. This field should be + TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes. + For doorbells, the second cell specifies the index of the doorbell to use. diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index 866efb278813..1994be858940 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -27,6 +27,7 @@ properties: - qcom,sm6350-ipcc - qcom,sm8250-ipcc - qcom,sm8350-ipcc + - qcom,sm8450-ipcc - qcom,sc7280-ipcc - const: qcom,ipcc @@ -61,23 +62,14 @@ additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> - mailbox@408000 { - compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; - reg = <0x408000 0x1000>; - interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <3>; - #mbox-cells = <2>; - }; - - smp2p-modem { - compatible = "qcom,smp2p"; - interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>; - - /* Other SMP2P fields */ - }; + mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index 8eb4bf52ea27..2c8b47285aa3 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -30,15 +30,11 @@ properties: items: - description: rx channel occupied - description: tx channel free - - description: wakeup source - minItems: 2 interrupt-names: items: - const: rx - const: tx - - const: wakeup - minItems: 2 wakeup-source: true @@ -70,10 +66,9 @@ examples: #mbox-cells = <1>; reg = <0x4c001000 0x400>; st,proc-id = <0>; - interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>, - <&intc GIC_SPI 101 IRQ_TYPE_NONE>, - <&aiec 62 1>; - interrupt-names = "rx", "tx", "wakeup"; + interrupts-extended = <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; clocks = <&rcc_clk IPCC>; wakeup-source; }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt deleted file mode 100644 index ad76edccf881..000000000000 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt +++ /dev/null @@ -1,127 +0,0 @@ -Xilinx IPI Mailbox Controller -======================================== - -The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage -messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI -agent owns registers used for notification and buffers for message. - - +-------------------------------------+ - | Xilinx ZynqMP IPI Controller | - +-------------------------------------+ - +--------------------------------------------------+ -ATF | | - | | - | | - +--------------------------+ | - | | - | | - +--------------------------------------------------+ - +------------------------------------------+ - | +----------------+ +----------------+ | -Hardware | | IPI Agent | | IPI Buffers | | - | | Registers | | | | - | | | | | | - | +----------------+ +----------------+ | - | | - | Xilinx IPI Agent Block | - +------------------------------------------+ - - -Controller Device Node: -=========================== -Required properties: --------------------- -IPI agent node: -- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" -- interrupt-parent: Phandle for the interrupt controller -- interrupts: Interrupt information corresponding to the - interrupt-names property. -- xlnx,ipi-id: local Xilinx IPI agent ID -- #address-cells: number of address cells of internal IPI mailbox nodes -- #size-cells: number of size cells of internal IPI mailbox nodes - -Internal IPI mailbox node: -- reg: IPI buffers address ranges -- reg-names: Names of the reg resources. It should have: - * local_request_region - - IPI request msg buffer written by local and read - by remote - * local_response_region - - IPI response msg buffer written by local and read - by remote - * remote_request_region - - IPI request msg buffer written by remote and read - by local - * remote_response_region - - IPI response msg buffer written by remote and read - by local -- #mbox-cells: Shall be 1. It contains: - * tx(0) or rx(1) channel -- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is - connected to. - -Optional properties: --------------------- -- method: The method of accessing the IPI agent registers. - Permitted values are: "smc" and "hvc". Default is - "smc". - -Client Device Node: -=========================== -Required properties: --------------------- -- mboxes: Standard property to specify a mailbox - (See ./mailbox.txt) -- mbox-names: List of identifier strings for each mailbox - channel. - -Example: -=========================== - zynqmp_ipi { - compatible = "xlnx,zynqmp-ipi-mailbox"; - interrupt-parent = <&gic>; - interrupts = <0 29 4>; - xlnx,ipi-id = <0>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* APU<->RPU0 IPI mailbox controller */ - ipi_mailbox_rpu0: mailbox@ff990400 { - reg = <0xff990400 0x20>, - <0xff990420 0x20>, - <0xff990080 0x20>, - <0xff9900a0 0x20>; - reg-names = "local_request_region", - "local_response_region", - "remote_request_region", - "remote_response_region"; - #mbox-cells = <1>; - xlnx,ipi-id = <1>; - }; - /* APU<->RPU1 IPI mailbox controller */ - ipi_mailbox_rpu1: mailbox@ff990440 { - reg = <0xff990440 0x20>, - <0xff990460 0x20>, - <0xff990280 0x20>, - <0xff9902a0 0x20>; - reg-names = "local_request_region", - "local_response_region", - "remote_request_region", - "remote_response_region"; - #mbox-cells = <1>; - xlnx,ipi-id = <2>; - }; - }; - rpu0 { - ... - mboxes = <&ipi_mailbox_rpu0 0>, - <&ipi_mailbox_rpu0 1>; - mbox-names = "tx", "rx"; - }; - rpu1 { - ... - mboxes = <&ipi_mailbox_rpu1 0>, - <&ipi_mailbox_rpu1 1>; - mbox-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml new file mode 100644 index 000000000000..2193141dd7fd --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xilinx IPI(Inter Processor Interrupt) mailbox controller + +description: | + The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage + messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI + agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ + TF-A | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | + Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + +maintainers: + - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + +properties: + compatible: + const: xlnx,zynqmp-ipi-mailbox + + method: + description: | + The method of calling the PM-API firmware layer. + Permitted values are. + - "smc" : SMC #0, following the SMCCC + - "hvc" : HVC #0, following the SMCCC + + $ref: /schemas/types.yaml#/definitions/string + enum: + - smc + - hvc + default: smc + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + xlnx,ipi-id: + description: | + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + interrupts: + maxItems: 1 + + ranges: true + +patternProperties: + '^mailbox@[0-9a-f]+$': + description: Internal ipi mailbox node + type: object # DT nodes are json objects + properties: + xlnx,ipi-id: + description: + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + '#mbox-cells': + const: 1 + description: + It contains tx(0) or rx(1) channel IPI id number. + + reg: + maxItems: 4 + + reg-names: + items: + - const: local_request_region + - const: local_response_region + - const: remote_request_region + - const: remote_response_region + + required: + - reg + - reg-names + - "#mbox-cells" + +additionalProperties: false + +required: + - compatible + - interrupts + - '#address-cells' + - '#size-cells' + - xlnx,ipi-id + +examples: + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + amba { + #address-cells = <0x2>; + #size-cells = <0x2>; + zynqmp-mailbox { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + xlnx,ipi-id = <0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mailbox: mailbox@ff9905c0 { + reg = <0x0 0xff9905c0 0x0 0x20>, + <0x0 0xff9905e0 0x0 0x20>, + <0x0 0xff990e80 0x0 0x20>, + <0x0 0xff990ea0 0x0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml index c19d8391e2d5..7589d377c686 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml @@ -60,7 +60,8 @@ properties: enables hot-plug detection. default-input: - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] description: Select which input is selected after reset. diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt deleted file mode 100644 index c4701f1eaaf6..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt +++ /dev/null @@ -1,9 +0,0 @@ -Dongwoon Anatech DW9807 voice coil lens driver - -DW9807 is a 10-bit DAC with current sink capability. It is intended for -controlling voice coil lenses. - -Mandatory properties: - -- compatible: "dongwoon,dw9807-vcm" -- reg: I2C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml new file mode 100644 index 000000000000..aae246ca3fcf --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2018, 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9807 voice coil lens driver + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + +description: | + DW9807 is a 10-bit DAC with current sink capability. It is intended for + controlling voice coil lenses. + +properties: + compatible: + const: dongwoon,dw9807-vcm + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lens@e { + compatible = "dongwoon,dw9807-vcm"; + reg = <0x0e>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml index afcf70947f7e..26d1807d0bb6 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml @@ -32,6 +32,15 @@ properties: description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz maxItems: 1 + dovdd-supply: + description: Interface power supply. + + avdd-supply: + description: Analog power supply. + + dvdd-supply: + description: Digital power supply. + reset-gpios: description: Reference to the GPIO connected to the XCLR pin, if any. maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml index deb5b657a2d5..d36fcca04cbc 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml @@ -63,6 +63,9 @@ properties: description: Describes point to scp. + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml index c73bf2352aca..440646e44c0d 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -47,7 +47,9 @@ description: | properties: compatible: - const: mediatek,mt8192-vcodec-dec + enum: + - mediatek,mt8192-vcodec-dec + - mediatek,mt8186-vcodec-dec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml index 086e1430af4f..8b37fccab5e2 100644 --- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -67,7 +67,7 @@ properties: remote-endpoint: true bus-width: - enum: [8, 9, 10, 11, 12] + enum: [8, 9, 10, 11, 12, 14] default: 12 hsync-active: @@ -126,4 +126,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml index 089f11d21b25..3bcfb8e12333 100644 --- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -18,7 +18,9 @@ properties: oneOf: - const: rockchip,rk3399-vdec - items: - - const: rockchip,rk3228-vdec + - enum: + - rockchip,rk3228-vdec + - rockchip,rk3328-vdec - const: rockchip,rk3399-vdec reg: diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index bacb60a34989..6cc4d3e5a61d 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -23,6 +23,7 @@ properties: - rockchip,rk3328-vpu - rockchip,rk3399-vpu - rockchip,px30-vpu + - rockchip,rk3568-vpu - items: - const: rockchip,rk3188-vpu - const: rockchip,rk3066-vpu diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 4391dce2caee..68c3b9871cf3 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -93,6 +93,7 @@ properties: - 4 # MIPI CSI-2 D-PHY - 5 # Parallel - 6 # BT.656 + - 7 # DPI description: Data bus type. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 13c4c82fd0d3..c7cfa6c2cd81 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -34,8 +34,12 @@ properties: - nvidia,tegra234-mc reg: - minItems: 1 - maxItems: 3 + minItems: 6 + maxItems: 18 + + reg-names: + minItems: 6 + maxItems: 18 interrupts: items: @@ -142,7 +146,18 @@ allOf: then: properties: reg: - maxItems: 1 + maxItems: 6 + description: 5 memory controller channels and 1 for stream-id registers + + reg-names: + maxItems: 6 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 - if: properties: @@ -151,7 +166,30 @@ allOf: then: properties: reg: - minItems: 3 + minItems: 18 + description: 17 memory controller channels and 1 for stream-id registers + + reg-names: + minItems: 18 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 - if: properties: @@ -160,13 +198,37 @@ allOf: then: properties: reg: - minItems: 3 + minItems: 18 + description: 17 memory controller channels and 1 for stream-id registers + + reg-names: + minItems: 18 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 additionalProperties: false required: - compatible - reg + - reg-names - interrupts - "#address-cells" - "#size-cells" @@ -182,7 +244,13 @@ examples: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>; /* MC3 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml deleted file mode 100644 index 514b2c5f8858..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml +++ /dev/null @@ -1,35 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: H8/300 bus controller - -maintainers: - - Krzysztof Kozlowski <krzk@kernel.org> - - Yoshinori Sato <ysato@users.sourceforge.jp> - -properties: - compatible: - items: - - enum: - - renesas,h8300h-bsc - - renesas,h8s-bsc - - const: renesas,h8300-bsc - - reg: - maxItems: 1 - -required: - - compatible - - reg - -additionalProperties: false - -examples: - - | - memory-controller@fee01e { - compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc"; - reg = <0xfee01e 8>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 9a6dbf54b540..645249ea21d1 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -31,14 +31,20 @@ properties: - renesas,r8a774b1-rpc-if # RZ/G2N - renesas,r8a774c0-rpc-if # RZ/G2E - renesas,r8a774e1-rpc-if # RZ/G2H + - renesas,r8a7795-rpc-if # R-Car H3 + - renesas,r8a7796-rpc-if # R-Car M3-W + - renesas,r8a77961-rpc-if # R-Car M3-W+ + - renesas,r8a77965-rpc-if # R-Car M3-N - renesas,r8a77970-rpc-if # R-Car V3M - renesas,r8a77980-rpc-if # R-Car V3H + - renesas,r8a77990-rpc-if # R-Car E3 - renesas,r8a77995-rpc-if # R-Car D3 - renesas,r8a779a0-rpc-if # R-Car V3U - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 or RZ/G2{E,H,M,N} device - items: - enum: + - renesas,r9a07g043-rpc-if # RZ/G2UL - renesas,r9a07g044-rpc-if # RZ/G2{L,LC} - renesas,r9a07g054-rpc-if # RZ/V2L - const: renesas,rzg2l-rpc-if diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index afec0bd2f1de..e25caf8ef9f4 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -57,7 +57,7 @@ properties: mediatek,rpmsg-name: description: Must be defined if the cros-ec is a rpmsg device for a Mediatek - ARM Cortex M4 Co-processor. Contains the name pf the rpmsg + ARM Cortex M4 Co-processor. Contains the name of the rpmsg device. Used to match the subnode to the rpmsg device announced by the SCP. $ref: "/schemas/types.yaml#/definitions/string" diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml new file mode 100644 index 000000000000..28eee02441ee --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml @@ -0,0 +1,256 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 PMIC from MediaTek Integrated + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + MT6360 is a PMIC device with the following sub modules. + It is interfaced to host controller using I2C interface. + + This document describes the binding for PMIC device and its sub module. + +properties: + compatible: + const: mediatek,mt6360 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-names: + const: IRQB + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The first cell is the IRQ number. + + regulators: + $ref: /schemas/regulator/mt6360-regulator.yaml# + + charger: + $ref: /schemas/power/supply/mt6360_charger.yaml# + + tcpc: + $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml# + + led-controller: + $ref: /schemas/leds/leds-mt6360.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + #include <dt-bindings/leds/common.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; + + regulators { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index a461ec2f758f..eb78e3ae7703 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -59,7 +59,7 @@ Required properties for peripheral child nodes: Optional properties for peripheral child nodes: - interrupts: Interrupts are specified as a 4-tuple. For more information see: - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt + Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml - interrupt-names: Corresponding interrupt name to the interrupts property Each child node of SPMI slave id represents a function of the PMIC. In the diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt deleted file mode 100644 index 23a17a6663ec..000000000000 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ /dev/null @@ -1,465 +0,0 @@ -RK8XX Power Management Integrated Circuit - -The rk8xx family current members: -rk805 -rk808 -rk809 -rk817 -rk818 - -Required properties: -- compatible: "rockchip,rk805" -- compatible: "rockchip,rk808" -- compatible: "rockchip,rk809" -- compatible: "rockchip,rk817" -- compatible: "rockchip,rk818" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller. -- #clock-cells: from common clock binding; shall be set to 1 (multiple clock - outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. - -Optional properties: -- clock-output-names: From common clock binding to override the - default output clock name -- rockchip,system-power-controller: Telling whether or not this pmic is controlling - the system power. -- wakeup-source: Device can be used as a wakeup source. - -Optional RK805 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc6-supply: The input supply for LDO_REG3 - -Optional RK808 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7 -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5 -- vcc10-supply: The input supply for LDO_REG6 -- vcc11-supply: The input supply for LDO_REG8 -- vcc12-supply: The input supply for SWITCH_REG2 -- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers - for 2 host gpio's used for dvs. The format of the gpio specifier depends in - the gpio controller. If DVS GPIOs aren't present, voltage changes will happen - very quickly with no slow ramp time. - -Optional shared RK809 and RK817 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3 -- vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6 -- vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9 - -Optional RK809 properties: -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 - -Optional RK817 properties: -- clocks: The input clock for the audio codec -- clock-names: The clock name for the codec clock. Should be "mclk". -- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0. - -- vcc8-supply: The input supply for BOOST -- vcc9-supply: The input supply for OTG_SWITCH -- codec: The child node for the codec to hold additional properties. - If no additional properties are required for the codec, this - node can be omitted. - -- rockchip,mic-in-differential: Telling if the microphone uses differential - mode. Should be under the codec child node. - -Optional RK818 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- boost-supply: The input supply for DCDC_BOOST -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7 -- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8 -- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG -- h_5v-supply: The input supply for HDMI_SWITCH -- usb-supply: The input supply for OTG_SWITCH - -Regulators: All the regulators of RK8XX to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the RK805 PMIC regulators are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK805 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 3 - -Following regulators of the RK808 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK808 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 8. - - SWITCH_REGn - - valid values for n are 1 to 2 - -Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK809 and RK817 datasheets. - - - DCDC_REGn - - valid values for n are 1 to 5 for RK809. - - valid values for n are 1 to 4 for RK817. - - LDO_REGn - - valid values for n are 1 to 9 for RK809. - - valid values for n are 1 to 9 for RK817. - - SWITCH_REGn - - valid values for n are 1 to 2 for RK809. - - BOOST for RK817 - - OTG_SWITCH for RK817 - -Following regulators of the RK818 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK818 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 9. - - SWITCH_REG - - HDMI_SWITCH - - OTG_SWITCH - -It is necessary to configure three pins for both the RK809 and RK817, the three -pins are "gpio_ts" "gpio_gt" "gpio_slp". - The gpio_gt and gpio_ts pins support the gpio function. - The gpio_slp pin is for controlling the pmic states, as below: - - reset - - power down - - sleep - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details - -Example: - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - reg = <0x1b>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vccio_pmu>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd_arm"; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - }; - - vccio_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_pmu"; - }; - - vcc_tp: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - }; - - vcc18_lcd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - }; - - vcca_codec: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; - }; - - vcc_wl: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_wl"; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lcd"; - }; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml new file mode 100644 index 000000000000..4992f71b6fc3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK805 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD + that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc6-supply: + description: + The input supply for LDO_REG3. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml new file mode 100644 index 000000000000..f5908fa01a61 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml @@ -0,0 +1,257 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk808 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3 and LDO_REG7. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for LDO_REG4 and LDO_REG5. + + vcc10-supply: + description: + The input supply for LDO_REG6. + + vcc11-supply: + description: + The input supply for LDO_REG8. + + vcc12-supply: + description: + The input supply for SWITCH_REG2. + + vddio-supply: + description: + The input supply for digital IO. + + dvs-gpios: + description: | + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for + 2 host gpio's used for dvs. The format of the gpio specifier + depends in the gpio controller. If DVS GPIOs aren't present, + voltage changes will happen very quickly with no slow ramp time. + maxItems: 2 + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml new file mode 100644 index 000000000000..7fb849ac74a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK809 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and power button. + +properties: + compatible: + enum: + - rockchip,rk809 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for DCDC_REG5 and SWITCH_REG2. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_pin>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml new file mode 100644 index 000000000000..bfc1720adc43 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, a power button, an audio codec, and a + battery charger manager. + +properties: + compatible: + enum: + - rockchip,rk817 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for BOOST. + + vcc9-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + clocks: + description: + The input clock for the audio codec. + + clock-names: + description: + The clock name for the codec clock. + items: + - const: mclk + + '#sound-dai-cells': + description: + Needed for the interpretation of sound dais. + const: 0 + + codec: + description: | + The child node for the codec to hold additional properties. If no + additional properties are required for the codec, this node can be + omitted. + type: object + properties: + rockchip,mic-in-differential: + type: boolean + description: + Describes if the microphone uses differential mode. + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml new file mode 100644 index 000000000000..b57c4b005cf4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK818 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk818 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + boost-supply: + description: + The input supply for DCDC_BOOST + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. + + vcc8-supply: + description: + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. + + vcc9-supply: + description: + The input supply for LDO_REG9 and SWITCH_REG. + + vddio-supply: + description: + The input supply for digital IO. + + h_5v-supply: + description: + The input supply for HDMI_SWITCH. + + usb-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + boost-supply = <&vdd_in_otg_out>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_misc_1v8>; + vcc8-supply = <&vdd_misc_1v8>; + vcc9-supply = <&vdd_3v3_io>; + vddio-supply = <&vdd_3v3_io>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_3v3_io: DCDC_REG4 { + regulator-name = "vdd_3v3_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_sys: DCDC_BOOST { + regulator-name = "vdd_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vdd_sd: SWITCH_REG { + regulator-name = "vdd_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_eth_2v5: LDO_REG2 { + regulator-name = "vdd_eth_2v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2500000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_lcd_ldo: LDO_REG4 { + regulator-name = "vdd_1v8_lcd_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0_lcd: LDO_REG6 { + regulator-name = "vdd_1v0_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_ldo: LDO_REG7 { + regulator-name = "vdd_1v8_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_io_sd: LDO_REG9 { + regulator-name = "vdd_io_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml index f7bb67d10eff..b97b06848729 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -79,8 +79,8 @@ examples: clocks = <&cmu_aud CLK_ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; + dma-channels = <8>; + dma-requests = <32>; power-domains = <&pd_aud>; }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 13baa452cc9d..fb784045013f 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -100,12 +100,4 @@ examples: compatible = "allwinner,sun8i-h3-system-controller", "syscon"; reg = <0x01c00000 0x1000>; }; - - - | - gpr: iomuxc-gpr@20e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; - hwlocks = <&hwlock1 1>; - }; - ... diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml index 9e762d474218..ea3337dafaf5 100644 --- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -14,6 +14,7 @@ description: | range of analogue I/O. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml - $ref: /schemas/sound/wlf,arizona.yaml# - $ref: /schemas/regulator/wlf,arizona.yaml# - $ref: /schemas/extcon/wlf,arizona.yaml# diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt deleted file mode 100644 index ae16f9ea8606..000000000000 --- a/Documentation/devicetree/bindings/mtd/common.txt +++ /dev/null @@ -1 +0,0 @@ -This file has been moved to mtd.yaml. diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt index 74981520d6dd..a99de13c7ccd 100644 --- a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt @@ -17,7 +17,7 @@ spi-nor-controller@10000000 { reg = <0x10000000 0x1000>, <0x14000000 0x1000000>; reg-names = "control", "memory"; clocks = <&clock HI3519_FMC_CLK>; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml index 60d5746eb39d..dfd9ea582bb7 100644 --- a/Documentation/devicetree/bindings/mux/reg-mux.yaml +++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml @@ -25,8 +25,12 @@ properties: const: 1 mux-reg-masks: - description: an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: register offset + - description: pre-shifted bitfield mask + description: Each entry pair describes a single mux control. idle-states: true @@ -96,7 +100,6 @@ examples: #include <dt-bindings/mux/mux.h> syscon@1000 { - compatible = "fsl,imx7d-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x1000 0x100>; mux2: mux-controller { diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index 1129f2b58e98..77750df0c2c4 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -36,6 +36,21 @@ properties: enum: [ 4, 8, 12, 16, 20, 24 ] default: 8 + adi,phy-output-clock: + description: Select clock output on GP_CLK pin. Two clocks are available: + A 25MHz reference and a free-running 125MHz. + The phy can alternatively automatically switch between the reference and + the 125MHz clocks based on its internal state. + $ref: /schemas/types.yaml#/definitions/string + enum: + - 25mhz-reference + - 125mhz-free-running + - adaptive-free-running + + adi,phy-output-reference-clock: + description: Enable 25MHz reference clock output on CLK25_REF pin. + type: boolean + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml new file mode 100644 index 000000000000..1af52358de4c --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88178.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the USB Ethernet controllers + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Device tree properties for hard wired USB Ethernet devices. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usbb95,1720 # ASIX AX88172 + - usbb95,172a # ASIX AX88172A + - usbb95,1780 # ASIX AX88178 + - usbb95,7720 # ASIX AX88772 + - usbb95,772a # ASIX AX88772A + - usbb95,772b # ASIX AX88772B + - usbb95,7e2b # ASIX AX88772B + + reg: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,7e2b"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + usb1@1 { + compatible = "usb1234,5678"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,772b"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index 1c88820cbcdf..f81eda8cb0a5 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -20,10 +20,14 @@ allOf: properties: compatible: const: aspeed,ast2600-mdio + reg: maxItems: 1 description: The register range of the MDIO controller instance + resets: + maxItems: 1 + required: - compatible - reg @@ -34,11 +38,13 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/ast2600-clock.h> mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; + resets = <&syscon ASPEED_RESET_MII>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml new file mode 100644 index 000000000000..4635cb96fc64 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CTU CAN FD Open-source IP Core Device Tree Bindings + +description: | + Open-source CAN FD IP core developed at the Czech Technical University in Prague + + The core sources and documentation on project page + [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core + [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf + + Integration in Xilinx Zynq SoC based system together with + OpenCores SJA1000 compatible controllers + [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top + Martin Jerabek dimploma thesis with integration and testing + framework description + [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf + +maintainers: + - Pavel Pisa <pisa@cmp.felk.cvut.cz> + - Ondrej Ille <ondrej.ille@gmail.com> + - Martin Jerabek <martin.jerabek01@gmail.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - const: ctu,ctucanfd-2 + - const: ctu,ctucanfd + - const: ctu,ctucanfd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: | + phandle of reference clock (100 MHz is appropriate + for FPGA implementation on Zynq-7000 system). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + ctu_can_fd_0: can@43c30000 { + compatible = "ctu,ctucanfd"; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index b3826af6bd6e..7a73057707b4 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -5,8 +5,8 @@ $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: - Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree - bindings + Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN + controller device tree bindings maintainers: - Marc Kleine-Budde <mkl@pengutronix.de> @@ -17,13 +17,14 @@ allOf: properties: compatible: oneOf: - - const: microchip,mcp2517fd - description: for MCP2517FD - - const: microchip,mcp2518fd - description: for MCP2518FD - - const: microchip,mcp251xfd - description: to autodetect chip variant - + - enum: + - microchip,mcp2517fd + - microchip,mcp2518fd + - microchip,mcp251xfd + - items: + - enum: + - microchip,mcp251863 + - const: microchip,mcp2518fd reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml index f98c53dc1894..6f71fc96bc4e 100644 --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -23,6 +23,7 @@ properties: - renesas,r8a774e1-canfd # RZ/G2H - renesas,r8a7795-canfd # R-Car H3 - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77961-canfd # R-Car M3-W+ - renesas,r8a77965-canfd # R-Car M3-N - renesas,r8a77970-canfd # R-Car V3M - renesas,r8a77980-canfd # R-Car V3H @@ -32,6 +33,7 @@ properties: - items: - enum: + - renesas,r9a07g043-canfd # RZ/G2UL - renesas,r9a07g044-canfd # RZ/G2{L,LC} - renesas,r9a07g054-canfd # RZ/V2L - const: renesas,rzg2l-canfd # RZ/G2L family @@ -86,6 +88,7 @@ required: - compatible - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -134,7 +137,6 @@ then: - const: rstc_n required: - - interrupt-names - reset-names else: properties: @@ -165,6 +167,7 @@ examples: reg = <0xe66c0000 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7795_CLK_CANFD>, <&can_clk>; diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 6cd3d853dcba..337cec4d85ca 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -84,13 +84,6 @@ properties: phys: maxItems: 1 - phy-names: - const: sgmii-phy - description: - Required with ZynqMP SoC when in SGMII mode. - Should reference PS-GTR generic PHY device for this controller - instance. See ZynqMP example. - resets: maxItems: 1 description: @@ -129,6 +122,7 @@ patternProperties: reset-gpios: true magic-packet: + type: boolean description: Indicates that the hardware supports waking up via magic packet. @@ -204,7 +198,6 @@ examples: reset-names = "gem1_rst"; status = "okay"; phy-mode = "sgmii"; - phy-names = "sgmii-phy"; phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; fixed-link { speed = <1000>; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index ee42328a109d..ed1415a4381f 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -77,6 +77,15 @@ properties: description: Maximum PHY supported speed in Mbits / seconds. + phy-10base-t1l-2.4vpp: + description: | + tristate, request/disable 2.4 Vpp operating mode. The values are: + 0: Disable 2.4 Vpp operating mode. + 1: Request 2.4 Vpp operating mode from link partner. + Absence of this property will leave configuration to default values. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] + broken-turn-around: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml index 8e52b2e683b8..93b3e991d209 100644 --- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -37,6 +37,7 @@ properties: const: stmmaceth mode-reg: + $ref: /schemas/types.yaml#/definitions/phandle description: An extra syscon register that control ethernet interface and timing delay rx-clk-delay-ps: diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml new file mode 100644 index 000000000000..d2906b4a0f59 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MDIO Ethernet Controller interface + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: | + The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0, + Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that + provides an interface with the MDIO bus. Additionally, Armada 7k and Armada + 8k has a second unit which provides an interface with the xMDIO bus. This + driver handles these interfaces. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - marvell,orion-mdio + - marvell,xmdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio@d0072004 { + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x4>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <30>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt deleted file mode 100644 index 3f3cfc1d8d4d..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Marvell MDIO Ethernet Controller interface - -The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, -MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an -identical unit that provides an interface with the MDIO bus. -Additionally, Armada 7k and Armada 8k has a second unit which -provides an interface with the xMDIO bus. This driver handles -these interfaces. - -Required properties: -- compatible: "marvell,orion-mdio" or "marvell,xmdio" -- reg: address and length of the MDIO registers. When an interrupt is - not present, the length is the size of the SMI register (4 bytes) - otherwise it must be 0x84 bytes to cover the interrupt control - registers. - -Optional properties: -- interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to four required clocks for the MDIO instance - -The child nodes of the MDIO driver are the individual PHY devices -connected to this MDIO bus. They must have a "reg" property given the -PHY address on the MDIO bus. - -Example at the SoC level without an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; -}; - -Example with an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x84>; - interrupts = <30>; -}; - -And at the board level: - -mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -} diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml new file mode 100644 index 000000000000..699164dd1295 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -0,0 +1,434 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek,net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Frame Engine Ethernet controller + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs + have dual GMAC ports. + +properties: + compatible: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + - mediatek,mt7622-eth + - mediatek,mt7629-eth + - mediatek,mt7986-eth + - ralink,rt5350-eth + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + maxItems: 4 + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: fe + - const: gmac + - const: ppe + + mediatek,ethsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the port setup. + + cci-control-port: true + + mediatek,hifsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek hifsys controller used to provide various clocks + and reset to the system. + + mediatek,sgmiisys: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + description: + A list of phandle to the syscon node that handles the SGMII setup which is required for + those SoCs equipped with SGMII. + + dma-coherent: true + + mdio-bus: + $ref: mdio.yaml# + unevaluatedProperties: false + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp1 + - const: gp2 + + mediatek,pctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the ports slew rate and + driver current. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7622-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,sgmiisys: + minItems: 1 + maxItems: 1 + + mediatek,wed: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + maxItems: 2 + items: + maxItems: 1 + description: + List of phandles to wireless ethernet dispatch nodes. + + mediatek,pcie-mirror: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek pcie-mirror controller. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7629-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 17 + maxItems: 17 + + clock-names: + items: + - const: ethif + - const: sgmiitop + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: fe + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu1 + - const: wocpu0 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + +patternProperties: + "^mac@[0-1]$": + type: object + additionalProperties: false + allOf: + - $ref: ethernet-controller.yaml# + description: + Ethernet MAC node + properties: + compatible: + const: mediatek,eth-mac + + reg: + maxItems: 1 + + phy-handle: true + + phy-mode: true + + required: + - reg + - compatible + - phy-handle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - mediatek,ethsys + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/power/mt7622-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ethernet: ethernet@1b100000 { + compatible = "mediatek,mt7622-eth"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + cci-control-port = <&cci_control2>; + mediatek,pcie-mirror = <&pcie_mirror>; + mediatek,hifsys = <&hifsys>; + dma-coherent; + + #address-cells = <1>; + #size-cells = <0>; + + mdio0: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + reg = <0>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + reg = <1>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eth: ethernet@15100000 { + #define CLK_ETH_FE_EN 0 + #define CLK_ETH_WOCPU1_EN 3 + #define CLK_ETH_WOCPU0_EN 4 + #define CLK_TOP_NETSYS_SEL 43 + #define CLK_TOP_NETSYS_500M_SEL 44 + #define CLK_TOP_NETSYS_2X_SEL 46 + #define CLK_TOP_SGM_325M_SEL 47 + #define CLK_APMIXED_NET2PLL 1 + #define CLK_APMIXED_SGMPLL 3 + + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII_TX250M_EN>, + <&sgmiisys0 CLK_SGMII_RX250M_EN>, + <&sgmiisys0 CLK_SGMII_CDR_REF>, + <&sgmiisys0 CLK_SGMII_CDR_FB>, + <&sgmiisys1 CLK_SGMII_TX250M_EN>, + <&sgmiisys1 CLK_SGMII_RX250M_EN>, + <&sgmiisys1 CLK_SGMII_CDR_REF>, + <&sgmiisys1 CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + + #address-cells = <1>; + #size-cells = <0>; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@0 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reset-gpios = <&pio 6 1>; + reset-deassert-us = <20000>; + reg = <5>; + }; + + phy6: ethernet-phy@1 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reg = <6>; + }; + }; + + mac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + reg = <0>; + }; + + mac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt deleted file mode 100644 index 72d03e07cf7c..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ /dev/null @@ -1,98 +0,0 @@ -MediaTek Frame Engine Ethernet controller -========================================= - -The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs -have dual GMAC each represented by a child node.. - -* Ethernet controller node - -Required properties: -- compatible: Should be - "mediatek,mt2701-eth": for MT2701 SoC - "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC - "mediatek,mt7622-eth": for MT7622 SoC - "mediatek,mt7629-eth": for MT7629 SoC - "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the three frame engines interrupts in numeric - order. These are fe_int0, fe_int1 and fe_int2. -- clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC - "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", - "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", - "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", - "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", - "eth2pll" : For MT7629 SoC. -- power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain phandles to the ethsys reset signals -- reset-names: Should contain the names of reset signal listed in the resets - property - These are "fe", "gmac" and "ppe" -- mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,infracfg: phandle to the syscon node that handles the path from - GMAC to PHY variants, which is required for MT7629 SoC. -- mediatek,sgmiisys: a list of phandles to the syscon node that handles the - SGMII setup which is required for those SoCs equipped with SGMII such - as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared - by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed - to GMAC1 and GMAC2, respectively. -- mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current: only for MT2701 and MT7623 SoC - -* Ethernet MAC node - -Required properties: -- compatible: Should be "mediatek,eth-mac" -- reg: The number of the MAC -- phy-handle: see ethernet.txt file in the same directory and - the phy-mode "trgmii" required being provided when reg - is equal to 0 and the MAC uses fixed-link to connect - with internal switch such as MT7530. - -Example: - -eth: ethernet@1b100000 { - compatible = "mediatek,mt7623-eth"; - reg = <0 0x1b100000 0 0x20000>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_ESW>, - <ðsys CLK_ETHSYS_GP2>, - <ðsys CLK_ETHSYS_GP1>; - clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW - GIC_SPI 199 IRQ_TYPE_LEVEL_LOW - GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - resets = <ðsys MT2701_ETHSYS_ETH_RST>; - reset-names = "eth"; - mediatek,ethsys = <ðsys>; - mediatek,pctl = <&syscfg_pctl_a>; - #address-cells = <1>; - #size-cells = <0>; - - gmac1: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-handle = <&phy0>; - }; - - gmac2: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy1>; - }; - - mdio-bus { - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index 8d157f0295a5..a9ed691ffb03 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -45,3 +45,12 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. + + - coma-mode-gpios: If present the given gpio will be deasserted when the + PHY is probed. + + Some PHYs have a COMA mode input pin which puts the PHY into + isolate and power-down mode. On some boards this input is connected + to a GPIO of the SoC. + + Supported on the LAN8814. diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml new file mode 100644 index 000000000000..cf91fecd8909 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the USB Ethernet controllers + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Device tree properties for hard wired SMSC95xx compatible USB Ethernet + controller. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usb424,9500 # SMSC9500 USB Ethernet Device + - usb424,9505 # SMSC9505 USB Ethernet Device + - usb424,9530 # SMSC LAN9530 USB Ethernet Device + - usb424,9730 # SMSC LAN9730 USB Ethernet Device + - usb424,9900 # SMSC9500 USB Ethernet Device (SAL10) + - usb424,9901 # SMSC9505 USB Ethernet Device (SAL10) + - usb424,9902 # SMSC9500A USB Ethernet Device (SAL10) + - usb424,9903 # SMSC9505A USB Ethernet Device (SAL10) + - usb424,9904 # SMSC9512/9514 USB Hub & Ethernet Device (SAL10) + - usb424,9905 # SMSC9500A USB Ethernet Device (HAL) + - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) + - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) + - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID) + - usb424,9e00 # SMSC9500A USB Ethernet Device + - usb424,9e01 # SMSC9505A USB Ethernet Device + - usb424,9e08 # SMSC LAN89530 USB Ethernet Device + - usb424,ec00 # SMSC9512/9514 USB Hub & Ethernet Device + + reg: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9e00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml index 13812768b923..dc116f14750e 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml @@ -39,6 +39,7 @@ properties: - description: frame dma based extraction - description: analyzer interrupt - description: ptp interrupt + - description: ptp external interrupt interrupt-names: minItems: 1 @@ -47,16 +48,15 @@ properties: - const: fdma - const: ana - const: ptp + - const: ptp-ext resets: items: - description: Reset controller used for switch core reset (soft reset) - - description: Reset controller used for releasing the phy from reset reset-names: items: - const: switch - - const: phy ethernet-ports: type: object @@ -145,8 +145,8 @@ examples: reg-names = "cpu", "gcb"; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "xtr"; - resets = <&switch_reset 0>, <&phy_reset 0>; - reset-names = "switch", "phy"; + resets = <&switch_reset 0>; + reset-names = "switch"; ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml new file mode 100644 index 000000000000..2c451cfa4e0b --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,miim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi MII Management Controller (MIIM) + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - mscc,ocelot-miim + - microchip,lan966x-miim + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + items: + - description: base address + - description: associated reset register for internal PHYs + minItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + mdio@107009c { + compatible = "mscc,ocelot-miim"; + reg = <0x107009c 0x36>, <0x10700f0 0x8>; + interrupts = <14>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt deleted file mode 100644 index 70e0cb1ee485..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-miim.txt +++ /dev/null @@ -1,26 +0,0 @@ -Microsemi MII Management Controller (MIIM) / MDIO -================================================= - -Properties: -- compatible: must be "mscc,ocelot-miim" or "microchip,lan966x-miim" -- reg: The base address of the MDIO bus controller register bank. Optionally, a - second register bank can be defined if there is an associated reset register - for internal PHYs -- #address-cells: Must be <1>. -- #size-cells: Must be <0>. MDIO addresses have no size component. -- interrupts: interrupt specifier (refer to the interrupt binding) - -Typically an MDIO bus might have several children. - -Example: - mdio@107009c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "mscc,ocelot-miim"; - reg = <0x107009c 0x36>, <0x10700f0 0x8>; - interrupts = <14>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 58ecc62adfaa..dd4bb2e74880 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -182,6 +182,12 @@ examples: smp2p-mpss { compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 6>; + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + ipa_smp2p_out: ipa-ap-to-modem { qcom,entry-name = "ipa"; #qcom,smem-state-cells = <1>; @@ -193,6 +199,7 @@ examples: #interrupt-cells = <2>; }; }; + ipa@1e40000 { compatible = "qcom,sdm845-ipa"; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index ee2ccacc39ff..acf347f3cdbe 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -45,6 +45,11 @@ properties: - items: - enum: + - renesas,etheravb-r9a09g011 # RZ/V2M + - const: renesas,etheravb-rzv2m # RZ/V2M compatible + + - items: + - enum: - renesas,r9a07g043-gbeth # RZ/G2UL - renesas,r9a07g044-gbeth # RZ/G2{L,LC} - renesas,r9a07g054-gbeth # RZ/V2L @@ -160,16 +165,33 @@ allOf: - const: arp_ns rx-internal-delay-ps: false else: - properties: - interrupts: - minItems: 25 - maxItems: 25 - interrupt-names: - items: - pattern: '^ch[0-9]+$' - required: - - interrupt-names - - rx-internal-delay-ps + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + interrupts: + minItems: 29 + maxItems: 29 + interrupt-names: + items: + pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$' + rx-internal-delay-ps: false + required: + - interrupt-names + else: + properties: + interrupts: + minItems: 25 + maxItems: 25 + interrupt-names: + items: + pattern: '^ch[0-9]+$' + required: + - interrupt-names + - rx-internal-delay-ps - if: properties: @@ -231,17 +253,35 @@ allOf: - const: chi - const: refclk else: - properties: - clocks: - minItems: 1 - items: - - description: AVB functional clock - - description: Optional TXC reference clock - clock-names: - minItems: 1 - items: - - const: fck - - const: refclk + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + clocks: + items: + - description: Main clock + - description: Coherent Hub Interface clock + - description: gPTP reference clock + clock-names: + items: + - const: axi + - const: chi + - const: gptp + else: + properties: + clocks: + minItems: 1 + items: + - description: AVB functional clock + - description: Optional TXC reference clock + clock-names: + minItems: 1 + items: + - const: fck + - const: refclk additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml new file mode 100644 index 000000000000..6df533162632 --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller + +maintainers: + - Nicolas Pitre <nico@fluxnic.net> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: smsc,lan91c111 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 1, 2, 4 ] + default: 4 + + reset-gpios: + description: GPIO connected to control RESET pin + maxItems: 1 + + power-gpios: + description: GPIO connect to control PWRDWN pin + maxItems: 1 + + pxa-u16-align4: + description: put in place the workaround the force all u16 writes to be + 32 bits aligned + type: boolean + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt deleted file mode 100644 index 309e37eb7c7c..000000000000 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ /dev/null @@ -1,17 +0,0 @@ -SMSC LAN91c111 Ethernet mac - -Required properties: -- compatible = "smsc,lan91c111"; -- reg : physical address and size of registers -- interrupts : interrupt connection - -Optional properties: -- phy-device : see ethernet.txt file in the same directory -- reg-io-width : Mask of sizes (in bytes) of the IO accesses that - are supported on the device. Valid value for SMSC LAN91c111 are - 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning - 16-bit access only. -- power-gpios: GPIO to control the PWRDWN pin -- reset-gpios: GPIO to control the RESET pin -- pxa-u16-align4 : Boolean, put in place the workaround the force all - u16 writes to be 32 bits aligned diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml new file mode 100644 index 000000000000..62dffee27c3d --- /dev/null +++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Dual Ethernet MAC Device Tree Bindings + +maintainers: + - Wells Lu <wellslutw@gmail.com> + +description: | + Sunplus SP7021 dual 10M/100M Ethernet MAC controller. + Device node of the controller has following properties. + +properties: + compatible: + const: sunplus,sp7021-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + ethernet-ports: + type: object + description: Ethernet ports to PHY + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-1]$": + type: object + description: Port to PHY + + properties: + reg: + minimum: 0 + maximum: 1 + + phy-handle: + maxItems: 1 + + phy-mode: + maxItems: 1 + + nvmem-cells: + items: + - description: nvmem cell address of MAC address + + nvmem-cell-names: + description: names corresponding to the nvmem cells + items: + - const: mac-address + + required: + - reg + - phy-handle + - phy-mode + - nvmem-cells + - nvmem-cell-names + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - pinctrl-0 + - pinctrl-names + - ethernet-ports + - mdio + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@9c108000 { + compatible = "sunplus,sp7021-emac"; + reg = <0x9c108000 0x400>; + interrupt-parent = <&intc>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0xa7>; + resets = <&rstc 0x97>; + pinctrl-0 = <&emac_demo_board_v3_pins>; + pinctrl-names = "default"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + phy-handle = <ð_phy1>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr1>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; + + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 6f44f9516c36..a339202c5e8e 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -34,6 +34,7 @@ properties: maxItems: 1 bus_freq: + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 2500000 description: MDIO Bus frequency diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index a30419ef550a..b783ad0d1f53 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -142,4 +142,3 @@ examples: assigned-clock-parents = <&k3_clks 118 11>; }; }; - diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index b12bfe61c67a..0988ed8d1c12 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -52,6 +52,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/toshiba,tmpv770x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> soc { @@ -63,7 +64,7 @@ examples: reg = <0 0x28000000 0 0x10000>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; - clocks = <&clk300mhz>, <&clk125mhz>; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; clock-names = "stmmaceth", "phy_ref_clk"; snps,txpbl = <4>; snps,rxpbl = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index cdf7b873b419..8c01fdba134b 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -20,120 +20,17 @@ properties: enum: - qcom,ipq8074-wifi - qcom,ipq6018-wifi + - qcom,wcn6750-wifi reg: maxItems: 1 interrupts: - items: - - description: misc-pulse1 interrupt events - - description: misc-latch interrupt events - - description: sw exception interrupt events - - description: watchdog interrupt events - - description: interrupt event for ring CE0 - - description: interrupt event for ring CE1 - - description: interrupt event for ring CE2 - - description: interrupt event for ring CE3 - - description: interrupt event for ring CE4 - - description: interrupt event for ring CE5 - - description: interrupt event for ring CE6 - - description: interrupt event for ring CE7 - - description: interrupt event for ring CE8 - - description: interrupt event for ring CE9 - - description: interrupt event for ring CE10 - - description: interrupt event for ring CE11 - - description: interrupt event for ring host2wbm-desc-feed - - description: interrupt event for ring host2reo-re-injection - - description: interrupt event for ring host2reo-command - - description: interrupt event for ring host2rxdma-monitor-ring3 - - description: interrupt event for ring host2rxdma-monitor-ring2 - - description: interrupt event for ring host2rxdma-monitor-ring1 - - description: interrupt event for ring reo2ost-exception - - description: interrupt event for ring wbm2host-rx-release - - description: interrupt event for ring reo2host-status - - description: interrupt event for ring reo2host-destination-ring4 - - description: interrupt event for ring reo2host-destination-ring3 - - description: interrupt event for ring reo2host-destination-ring2 - - description: interrupt event for ring reo2host-destination-ring1 - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 - - description: interrupt event for ring ppdu-end-interrupts-mac3 - - description: interrupt event for ring ppdu-end-interrupts-mac2 - - description: interrupt event for ring ppdu-end-interrupts-mac1 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 - - description: interrupt event for ring rxdma2host-destination-ring-mac3 - - description: interrupt event for ring rxdma2host-destination-ring-mac2 - - description: interrupt event for ring rxdma2host-destination-ring-mac1 - - description: interrupt event for ring host2tcl-input-ring4 - - description: interrupt event for ring host2tcl-input-ring3 - - description: interrupt event for ring host2tcl-input-ring2 - - description: interrupt event for ring host2tcl-input-ring1 - - description: interrupt event for ring wbm2host-tx-completions-ring3 - - description: interrupt event for ring wbm2host-tx-completions-ring2 - - description: interrupt event for ring wbm2host-tx-completions-ring1 - - description: interrupt event for ring tcl2host-status-ring - + minItems: 32 + maxItems: 52 interrupt-names: - items: - - const: misc-pulse1 - - const: misc-latch - - const: sw-exception - - const: watchdog - - const: ce0 - - const: ce1 - - const: ce2 - - const: ce3 - - const: ce4 - - const: ce5 - - const: ce6 - - const: ce7 - - const: ce8 - - const: ce9 - - const: ce10 - - const: ce11 - - const: host2wbm-desc-feed - - const: host2reo-re-injection - - const: host2reo-command - - const: host2rxdma-monitor-ring3 - - const: host2rxdma-monitor-ring2 - - const: host2rxdma-monitor-ring1 - - const: reo2ost-exception - - const: wbm2host-rx-release - - const: reo2host-status - - const: reo2host-destination-ring4 - - const: reo2host-destination-ring3 - - const: reo2host-destination-ring2 - - const: reo2host-destination-ring1 - - const: rxdma2host-monitor-destination-mac3 - - const: rxdma2host-monitor-destination-mac2 - - const: rxdma2host-monitor-destination-mac1 - - const: ppdu-end-interrupts-mac3 - - const: ppdu-end-interrupts-mac2 - - const: ppdu-end-interrupts-mac1 - - const: rxdma2host-monitor-status-ring-mac3 - - const: rxdma2host-monitor-status-ring-mac2 - - const: rxdma2host-monitor-status-ring-mac1 - - const: host2rxdma-host-buf-ring-mac3 - - const: host2rxdma-host-buf-ring-mac2 - - const: host2rxdma-host-buf-ring-mac1 - - const: rxdma2host-destination-ring-mac3 - - const: rxdma2host-destination-ring-mac2 - - const: rxdma2host-destination-ring-mac1 - - const: host2tcl-input-ring4 - - const: host2tcl-input-ring3 - - const: host2tcl-input-ring2 - - const: host2tcl-input-ring1 - - const: wbm2host-tx-completions-ring3 - - const: wbm2host-tx-completions-ring2 - - const: wbm2host-tx-completions-ring1 - - const: tcl2host-status-ring + maxItems: 52 qcom,rproc: $ref: /schemas/types.yaml#/definitions/phandle @@ -151,20 +48,205 @@ properties: board-2.bin for designs with colliding bus and device specific ids memory-region: - maxItems: 1 + minItems: 1 + maxItems: 2 description: phandle to a node describing reserved memory (System RAM memory) used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) + iommus: + minItems: 1 + maxItems: 2 + + wifi-firmware: + type: object + description: | + WCN6750 wifi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + required: + - iommus + required: - compatible - reg - interrupts - - interrupt-names - qcom,rproc additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + properties: + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-wifi + then: + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 + - description: interrupt event for ring DP9 + - description: interrupt event for ring DP10 + - description: interrupt event for ring DP11 + - description: interrupt event for ring DP12 + - description: interrupt event for ring DP13 + - description: interrupt event for ring DP14 + - description: interrupt event for ring DP15 + - description: interrupt event for ring DP16 + - description: interrupt event for ring DP17 + - description: interrupt event for ring DP18 + - description: interrupt event for ring DP19 + - description: interrupt event for ring DP20 + - description: interrupt event for ring DP21 + - description: interrupt event for ring DP22 + examples: - | @@ -302,10 +384,71 @@ examples: pcie0 { #size-cells = <2>; #address-cells = <3>; - + wifi_0: wifi@0 { reg = <0 0 0 0 0>; memory-region = <&qcn9074_0>; }; }; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + wlan_fw_mem: memory@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0x17a10040 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; diff --git a/Documentation/devicetree/bindings/staging/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 105725a127ab..76199a67d628 100644 --- a/Documentation/devicetree/bindings/staging/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -3,7 +3,7 @@ %YAML 1.2 --- -$id: http://devicetree.org/schemas/staging/net/wireless/silabs,wfx.yaml# +$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Silicon Labs WFxxx devicetree bindings @@ -39,6 +39,7 @@ properties: compatible: items: - enum: + - prt,prtt1c-wfm200 # Protonic PRTT1C Board - silabs,brd4001a # WGM160P Evaluation Board - silabs,brd8022a # WF200 Evaluation Board - silabs,brd8023a # WFM200 Evaluation Board diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 8dd164d10290..d68bb2ec1f7e 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -54,9 +54,11 @@ properties: ref-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. tcxo-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: TCXO clock frequency. clock-xtal: diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml new file mode 100644 index 000000000000..ddff9233b159 --- /dev/null +++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple ANS NVM Express host controller + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +properties: + compatible: + items: + - enum: + - apple,t8103-nvme-ans2 + - apple,t6000-nvme-ans2 + - const: apple,nvme-ans2 + + reg: + items: + - description: NVMe and NVMMU registers + - description: ANS2 co-processor control registers + + reg-names: + items: + - const: nvme + - const: ans + + resets: + maxItems: 1 + + power-domains: + # two domains for t8103, three for t6000 + minItems: 2 + items: + - description: power domain for the NVMe controller. + - description: power domain for the first PCIe bus connecting the NVMe + controller to the storage modules. + - description: optional power domain for the second PCIe bus + connecting the NVMe controller to the storage modules. + + power-domain-names: + minItems: 2 + items: + - const: ans + - const: apcie0 + - const: apcie1 + + mboxes: + maxItems: 1 + description: Mailbox of the ANS2 co-processor + + interrupts: + maxItems: 1 + + apple,sart: + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to the SART address filter. + + The SART address filter is documented in iommu/apple,sart.yaml. + +if: + properties: + compatible: + contains: + const: apple,t8103-nvme-ans2 +then: + properties: + power-domains: + maxItems: 2 + power-domain-names: + maxItems: 2 +else: + properties: + power-domains: + minItems: 3 + power-domain-names: + minItems: 3 + +required: + - compatible + - reg + - reg-names + - resets + - power-domains + - power-domain-names + - mboxes + - interrupts + - apple,sart + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + nvme@7bcc0000 { + compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2"; + reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>; + reg-names = "nvme", "ans"; + interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>; + mboxes = <&ans>; + apple,sart = <&sart>; + power-domains = <&ps_ans2>, <&ps_apcie_st>; + power-domain-names = "ans", "apcie0"; + resets = <&ps_ans2>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml index c819f0e90320..e374aa7891ae 100644 --- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml @@ -15,6 +15,10 @@ properties: - fsl,imx6q-snvs-lpgpr - fsl,imx6ul-snvs-lpgpr - fsl,imx7d-snvs-lpgpr + - fsl,imx8mm-snvs-lpgpr + - fsl,imx8mn-snvs-lpgpr + - fsl,imx8mp-snvs-lpgpr + - fsl,imx8mq-snvs-lpgpr required: - compatible diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index f36efa73a470..ee8a4791a78b 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -23,6 +23,7 @@ Required properties: "fsl,ls1012a-pcie" "fsl,ls1028a-pcie" EP mode: + "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" @@ -30,39 +31,49 @@ Required properties: - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - "intr": The interrupt that is asserted for controller interrupts +- interrupt-names: It could include the following entries: + "aer": Used for interrupt line which reports AER events when + non MSI/MSI-X/INTx mode is used + "pme": Used for interrupt line which reports PME events when + non MSI/MSI-X/INTx mode is used + "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) + which has a single interrupt line for miscellaneous controller + events(could include AER and PME events). - fsl,pcie-scfg: Must include two entries. The first entry must be a link to the SCFG device node - The second entry must be '0' or '1' based on physical PCIe controller index. + The second entry is the physical PCIe controller index starting from '0'. This is used to get SCFG PEXN registers - dma-coherent: Indicates that the hardware IP block can ensure the coherency of the data transferred from/to the IP block. This can avoid the software cache flush/invalid actions, and improve the performance significantly. +Optional properties: +- big-endian: If the PEX_LUT and PF register block is in big-endian, specify + this property. + Example: - pcie@3400000 { - compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; - fsl,pcie-scfg = <&scfg 0>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */ - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - }; + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <256>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt deleted file mode 100644 index 0adb56d5645e..000000000000 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ /dev/null @@ -1,397 +0,0 @@ -* Qualcomm PCI express root complex - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain - - "qcom,pcie-ipq8064" for ipq8064 - - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065 - - "qcom,pcie-apq8064" for apq8064 - - "qcom,pcie-apq8084" for apq8084 - - "qcom,pcie-msm8996" for msm8996 or apq8096 - - "qcom,pcie-ipq4019" for ipq4019 - - "qcom,pcie-ipq8074" for ipq8074 - - "qcom,pcie-qcs404" for qcs404 - - "qcom,pcie-sc8180x" for sc8180x - - "qcom,pcie-sdm845" for sdm845 - - "qcom,pcie-sm8250" for sm8250 - - "qcom,pcie-sm8450-pcie0" for PCIe0 on sm8450 - - "qcom,pcie-sm8450-pcie1" for PCIe1 on sm8450 - - "qcom,pcie-ipq6018" for ipq6018 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register ranges as listed in the reg-names property - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: Must include the following entries - - "parf" Qualcomm specific registers - - "dbi" DesignWare PCIe registers - - "elbi" External local bus interface registers - - "config" PCIe configuration space - - "atu" ATU address space (optional) - -- device_type: - Usage: required - Value type: <string> - Definition: Should be "pci". As specified in snps,dw-pcie.yaml - -- #address-cells: - Usage: required - Value type: <u32> - Definition: Should be 3. As specified in snps,dw-pcie.yaml - -- #size-cells: - Usage: required - Value type: <u32> - Definition: Should be 2. As specified in snps,dw-pcie.yaml - -- ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: As specified in snps,dw-pcie.yaml - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: MSI interrupt - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "msi" - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: Should be 1. As specified in snps,dw-pcie.yaml - -- interrupt-map-mask: - Usage: required - Value type: <prop-encoded-array> - Definition: As specified in snps,dw-pcie.yaml - -- interrupt-map: - Usage: required - Value type: <prop-encoded-array> - Definition: As specified in snps,dw-pcie.yaml - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: List of phandle and clock specifier pairs as listed - in clock-names property - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" Configuration AHB clock - -- clock-names: - Usage: required for ipq/apq8064 - Value type: <stringlist> - Definition: Should contain the following entries - - "core" Clocks the pcie hw block - - "phy" Clocks the pcie PHY block - - "aux" Clocks the pcie AUX block - - "ref" Clocks the pcie ref block -- clock-names: - Usage: required for apq8084/ipq4019 - Value type: <stringlist> - Definition: Should contain the following entries - - "aux" Auxiliary (AUX) clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for msm8996/apq8096 - Value type: <stringlist> - Definition: Should contain the following entries - - "pipe" Pipe Clock driving internal logic - - "aux" Auxiliary (AUX) clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for ipq8074 - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" PCIe to SysNOC BIU clock - - "axi_m" AXI Master clock - - "axi_s" AXI Slave clock - - "ahb" AHB clock - - "aux" Auxiliary clock - -- clock-names: - Usage: required for ipq6018 - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" PCIe to SysNOC BIU clock - - "axi_m" AXI Master clock - - "axi_s" AXI Slave clock - - "axi_bridge" AXI bridge clock - - "rchng" - -- clock-names: - Usage: required for qcs404 - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" AHB clock - - "aux" Auxiliary clock - - "master_bus" AXI Master clock - - "slave_bus" AXI Slave clock - -- clock-names: - Usage: required for sdm845 - Value type: <stringlist> - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "pipe" PIPE clock - -- clock-names: - Usage: required for sc8180x and sm8250 - Value type: <stringlist> - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "ddrss_sf_tbu" PCIe SF TBU clock - - "pipe" PIPE clock - -- clock-names: - Usage: required for sm8450-pcie0 and sm8450-pcie1 - Value type: <stringlist> - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "ddrss_sf_tbu" PCIe SF TBU clock - - "pipe" PIPE clock - - "pipe_mux" PIPE MUX - - "phy_pipe" PIPE output clock - - "ref" REFERENCE clock - - "aggre0" Aggre NoC PCIe0 AXI clock, only for sm8450-pcie0 - - "aggre1" Aggre NoC PCIe1 AXI clock - -- resets: - Usage: required - Value type: <prop-encoded-array> - Definition: List of phandle and reset specifier pairs as listed - in reset-names property - -- reset-names: - Usage: required for ipq/apq8064 - Value type: <stringlist> - Definition: Should contain the following entries - - "axi" AXI reset - - "ahb" AHB reset - - "por" POR reset - - "pci" PCI reset - - "phy" PHY reset - -- reset-names: - Usage: required for apq8084 - Value type: <stringlist> - Definition: Should contain the following entries - - "core" Core reset - -- reset-names: - Usage: required for ipq/apq8064 - Value type: <stringlist> - Definition: Should contain the following entries - - "axi_m" AXI master reset - - "axi_s" AXI slave reset - - "pipe" PIPE reset - - "axi_m_vmid" VMID reset - - "axi_s_xpu" XPU reset - - "parf" PARF reset - - "phy" PHY reset - - "axi_m_sticky" AXI sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - - "phy_ahb" PHY AHB reset - - "ext" EXT reset - -- reset-names: - Usage: required for ipq8074 - Value type: <stringlist> - Definition: Should contain the following entries - - "pipe" PIPE reset - - "sleep" Sleep reset - - "sticky" Core Sticky reset - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "ahb" AHB Reset - - "axi_m_sticky" AXI Master Sticky reset - -- reset-names: - Usage: required for ipq6018 - Value type: <stringlist> - Definition: Should contain the following entries - - "pipe" PIPE reset - - "sleep" Sleep reset - - "sticky" Core Sticky reset - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "ahb" AHB Reset - - "axi_m_sticky" AXI Master Sticky reset - - "axi_s_sticky" AXI Slave Sticky reset - -- reset-names: - Usage: required for qcs404 - Value type: <stringlist> - Definition: Should contain the following entries - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "axi_m_sticky" AXI Master Sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - -- reset-names: - Usage: required for sc8180x, sdm845, sm8250 and sm8450 - Value type: <stringlist> - Definition: Should contain the following entries - - "pci" PCIe core reset - -- power-domains: - Usage: required for apq8084 and msm8996/apq8096 - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pair to the - power domain which is responsible for collapsing - and restoring power to the peripheral - -- vdda-supply: - Usage: required - Value type: <phandle> - Definition: A phandle to the core analog power supply - -- vdda_phy-supply: - Usage: required for ipq/apq8064 - Value type: <phandle> - Definition: A phandle to the analog power supply for PHY - -- vdda_refclk-supply: - Usage: required for ipq/apq8064 - Value type: <phandle> - Definition: A phandle to the analog power supply for IC which generates - reference clock -- vddpe-3v3-supply: - Usage: optional - Value type: <phandle> - Definition: A phandle to the PCIe endpoint power supply - -- phys: - Usage: required for apq8084 and qcs404 - Value type: <phandle> - Definition: List of phandle(s) as listed in phy-names property - -- phy-names: - Usage: required for apq8084 and qcs404 - Value type: <stringlist> - Definition: Should contain "pciephy" - -- <name>-gpios: - Usage: optional - Value type: <prop-encoded-array> - Definition: List of phandle and GPIO specifier pairs. Should contain - - "perst-gpios" PCIe endpoint reset signal line - - "wake-gpios" PCIe endpoint wake signal line - -* Example for ipq/apq8064 - pcie@1b500000 { - compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie"; - reg = <0x1b500000 0x1000 - 0x1b502000 0x80 - 0x1b600000 0x100 - 0x0ff00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ - interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc PCIE_A_CLK>, - <&gcc PCIE_H_CLK>, - <&gcc PCIE_PHY_CLK>, - <&gcc PCIE_AUX_CLK>, - <&gcc PCIE_ALT_REF_CLK>; - clock-names = "core", "iface", "phy", "aux", "ref"; - resets = <&gcc PCIE_ACLK_RESET>, - <&gcc PCIE_HCLK_RESET>, - <&gcc PCIE_POR_RESET>, - <&gcc PCIE_PCI_RESET>, - <&gcc PCIE_PHY_RESET>, - <&gcc PCIE_EXT_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - pinctrl-0 = <&pcie_pins_default>; - pinctrl-names = "default"; - }; - -* Example for apq8084 - pcie0@fc520000 { - compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; - reg = <0xfc520000 0x2000>, - <0xff000000 0x1000>, - <0xff001000 0x1000>, - <0xff002000 0x2000>; - reg-names = "parf", "dbi", "elbi", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ - 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ - interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>; - clock-names = "iface", "master_bus", "slave_bus", "aux"; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE0_GDSC>; - vdda-supply = <&pma8084_l3>; - phys = <&pciephy0>; - phy-names = "pciephy"; - perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins_default>; - pinctrl-names = "default"; - }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml new file mode 100644 index 000000000000..0b69b12b849e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -0,0 +1,714 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI express root complex + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Stanimir Varbanov <svarbanov@mm-sol.com> + +description: | + Qualcomm PCIe root complex controller is bansed on the Synopsys DesignWare + PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-ipq6018 + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + minItems: 4 + maxItems: 5 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + # Common definitions for clocks, clock-names and reset. + # Platform constraints are described later. + clocks: + minItems: 3 + maxItems: 12 + + clock-names: + minItems: 3 + maxItems: 12 + + resets: + minItems: 1 + maxItems: 12 + + resets-names: + minItems: 1 + maxItems: 12 + + vdda-supply: + description: A phandle to the core analog power supply + + vdda_phy-supply: + description: A phandle to the core analog power supply for PHY + + vdda_refclk-supply: + description: A phandle to the core analog power supply for IC which generates reference clock + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-sdm845 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sm8250 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + then: + properties: + clocks: + minItems: 3 + maxItems: 5 + clock-names: + minItems: 3 + items: + - const: core # Clocks the pcie hw block + - const: iface # Configuration AHB clock + - const: phy # Clocks the pcie PHY block + - const: aux # Clocks the pcie AUX block, not on apq8064 + - const: ref # Clocks the pcie ref block, not on apq8064 + resets: + minItems: 5 + maxItems: 6 + reset-names: + minItems: 5 + items: + - const: axi # AXI reset + - const: ahb # AHB reset + - const: por # POR reset + - const: pci # PCI reset + - const: phy # PHY reset + - const: ext # EXT reset, not on apq8064 + required: + - vdda-supply + - vdda_phy-supply + - vdda_refclk-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # Configuration AHB clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + - const: aux # Auxiliary (AUX) clock + resets: + maxItems: 1 + reset-names: + items: + - const: core # Core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq4019 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: aux # Auxiliary (AUX) clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + resets: + minItems: 12 + maxItems: 12 + reset-names: + items: + - const: axi_m # AXI master reset + - const: axi_s # AXI slave reset + - const: pipe # PIPE reset + - const: axi_m_vmid # VMID reset + - const: axi_s_xpu # XPU reset + - const: parf # PARF reset + - const: phy # PHY reset + - const: axi_m_sticky # AXI sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + - const: phy_ahb # PHY AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + oneOf: + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: aux # Auxiliary (AUX) clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - properties: + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: cfg # Configuration clock + - const: aux # Auxiliary (AUX) clock + properties: + clocks: + minItems: 5 + maxItems: 5 + resets: false + reset-names: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8074 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: ahb # AHB clock + - const: aux # Auxiliary clock + resets: + minItems: 7 + maxItems: 7 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: axi_bridge # AXI bridge clock + - const: rchng + resets: + minItems: 8 + maxItems: 8 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: axi_s_sticky # AXI Slave Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-qcs404 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # AHB clock + - const: aux # Auxiliary clock + - const: master_bus # AXI Master clock + - const: slave_bus # AXI Slave clock + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdm845 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8180x + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie0 + then: + properties: + clocks: + minItems: 12 + maxItems: 12 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie1 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + required: + - power-domains + + - if: + not: + properties: + compatibles: + contains: + enum: + - qcom,pcie-msm8996 + then: + required: + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000>, + <0x1b502000 0x80>, + <0x1b600000 0x100>, + <0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, + <0x82000000 0 0 0x08000000 0 0x07e00000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 41>, + <&gcc 43>, + <&gcc 44>, + <&gcc 42>, + <&gcc 248>; + clock-names = "core", "iface", "phy", "aux", "ref"; + resets = <&gcc 27>, + <&gcc 26>, + <&gcc 25>, + <&gcc 24>, + <&gcc 23>, + <&gcc 22>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + pcie@fc520000 { + compatible = "qcom,pcie-apq8084"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000>, + <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 324>, + <&gcc 325>, + <&gcc 327>, + <&gcc 323>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc 81>; + reset-names = "core"; + power-domains = <&gcc 1>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; +... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 142bbe577763..bc0a9d1db750 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -19,20 +19,10 @@ description: |+ allOf: - $ref: /schemas/pci/pci-bus.yaml# -# We need a select here so we don't match all nodes with 'snps,dw-pcie' -select: - properties: - compatible: - contains: - const: rockchip,rk3568-pcie - required: - - compatible - properties: compatible: items: - const: rockchip,rk3568-pcie - - const: snps,dw-pcie reg: items: @@ -110,7 +100,7 @@ examples: #size-cells = <2>; pcie3x2: pcie@fe280000 { - compatible = "rockchip,rk3568-pcie", "snps,dw-pcie"; + compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0800000 0x0 0x390000>, <0x0 0xfe280000 0x0 0x10000>, <0x3 0x80000000 0x0 0x100000>; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index e59059ab5be0..b78535040f04 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -55,13 +55,15 @@ properties: Translation Unit) registers. num-ib-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of inbound address translation windows - maxItems: 1 deprecated: true num-ob-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of outbound address translation windows - maxItems: 1 deprecated: true required: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index a5345c494744..c90e5e2d25f6 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -68,6 +68,8 @@ properties: Translation Unit) registers. num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: | number of view ports configured in hardware. If a platform does not specify it, the driver autodetects it. diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml new file mode 100644 index 000000000000..f5926d0fb085 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe host controller + +description: | + UniPhier PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-pcie + + reg: + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + items: + - const: dbi + - const: link + - const: config + - const: atu + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + num-viewport: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + +required: + - compatible + - reg + - reg-names + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + <0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt deleted file mode 100644 index 359585db049f..000000000000 --- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt +++ /dev/null @@ -1,82 +0,0 @@ -Socionext UniPhier PCIe host controller bindings - -This describes the devicetree bindings for PCIe host controller implemented -on Socionext UniPhier SoCs. - -UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. - -Required properties: -- compatible: Should be "socionext,uniphier-pcie". -- reg: Specifies offset and length of the register set for the device. - According to the reg-names, appropriate register sets are required. -- reg-names: Must include the following entries: - "dbi" - controller configuration registers - "link" - SoC-specific glue layer registers - "config" - PCIe configuration space - "atu" - iATU registers for DWC version 4.80 or later -- clocks: A phandle to the clock gate for PCIe glue layer including - the host controller. -- resets: A phandle to the reset line for PCIe glue layer including - the host controller. -- interrupts: A list of interrupt specifiers. According to the - interrupt-names, appropriate interrupts are required. -- interrupt-names: Must include the following entries: - "dma" - DMA interrupt - "msi" - MSI interrupt - -Optional properties: -- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate - phys are required. -- phy-names: Must be "pcie-phy". - -Required sub-node: -- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI - interrupts. - -Required properties for legacy-interrupt-controller: -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- interrupt-parent: Phandle to the parent interrupt controller. -- interrupts: An interrupt specifier for legacy interrupt. - -Example: - - pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; - status = "disabled"; - reg-names = "dbi", "link", "config"; - reg = <0x66000000 0x1000>, <0x66010000 0x10000>, - <0x2fff0000 0x10000>; - #address-cells = <3>; - #size-cells = <2>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - num-lanes = <1>; - num-viewport = <1>; - bus-range = <0x0 0xff>; - device_type = "pci"; - ranges = - /* downstream I/O */ - <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; - #interrupt-cells = <1>; - interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ - <0 0 0 2 &pcie_intc 1>, /* INTB */ - <0 0 0 3 &pcie_intc 2>, /* INTC */ - <0 0 0 4 &pcie_intc 3>; /* INTD */ - - pcie_intc: legacy-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <0 226 4>; - }; - }; diff --git a/Documentation/devicetree/bindings/perf/spe-pmu.yaml b/Documentation/devicetree/bindings/perf/spe-pmu.yaml new file mode 100644 index 000000000000..7d74152f437e --- /dev/null +++ b/Documentation/devicetree/bindings/perf/spe-pmu.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/spe-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +maintainers: + - Will Deacon <will@kernel.org> + +description: + ARMv8.2 introduces the optional Statistical Profiling Extension for collecting + performance sample data using an in-memory trace buffer. + +properties: + compatible: + const: arm,statistical-profiling-extension-v1 + + interrupts: + maxItems: 1 + description: | + The PPI to signal SPE events. For heterogeneous systems where SPE is only + supported on a subset of the CPUs, please consult the arm,gic-v3 binding + for details on describing a PPI partition. + +additionalProperties: false + +required: + - compatible + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 7c25c8d51116..9db904a528ee 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -76,73 +76,24 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/aspeed-clock.h> - apb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon: scu@1e6e2000 { - compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - #clock-cells = <1>; - #reset-cells = <1>; - - pinctrl: pinctrl { - compatible = "aspeed,ast2500-pinctrl"; - aspeed,external-nodes = <&gfx>, <&lhc>; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A18"; - bias-disable; - }; + scu@1e6e2000 { + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + pinctrl: pinctrl { + compatible = "aspeed,ast2500-pinctrl"; + aspeed,external-nodes = <&gfx>, <&lhc>; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; }; - }; - - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - reg-io-width = <4>; - clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; - resets = <&syscon ASPEED_RESET_CRT1>; - interrupts = <0x19>; - syscon = <&syscon>; - memory-region = <&gfx_memory>; - }; - }; - - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x1e789000 0x1000>; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24>, <0x48 0x8>; + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A18"; + bias-disable; }; }; }; - - gfx_memory: framebuffer { - size = <0x01000000>; - alignment = <0x01000000>; - compatible = "shared-dma-pool"; - reusable; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 53e963e090f2..533b4cfe33d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -120,6 +120,7 @@ patternProperties: input-schmitt-disable: true input-polarity-invert: + type: boolean description: Enable or disable pin input polarity inversion. @@ -132,6 +133,7 @@ patternProperties: output-low: true output-polarity-invert: + type: boolean description: Enable or disable pin output polarity inversion. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt deleted file mode 100644 index bfab5ca49fd1..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale i.MX7 Dual IOMUX Controller - -iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar -as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low -power state retention capabilities on gpios that are part of iomuxc-lpsr -(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for -mux and pad control settings, it shares the input select register from main -iomuxc controller for daisy chain settings, the fsl,input-sel property extends -fsl,imx-pinctrl driver to support iomuxc-lpsr controller. - -iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; -}; - -iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; -}; - -Peripherals using pads from iomuxc-lpsr support low state retention power -state, under LPSR mode GPIO's state of pads are retain. - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or - "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller. -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual - Reference Manual for detailed CONFIG settings. -- fsl,input-sel: required property for iomuxc-lpsr controller, this property is - a phandle for main iomuxc controller which shares the input select register for - daisy chain settings. - -CONFIG bits definition: -PAD_CTL_PUS_100K_DOWN (0 << 5) -PAD_CTL_PUS_5K_UP (1 << 5) -PAD_CTL_PUS_47K_UP (2 << 5) -PAD_CTL_PUS_100K_UP (3 << 5) -PAD_CTL_PUE (1 << 4) -PAD_CTL_HYS (1 << 3) -PAD_CTL_SRE_SLOW (1 << 2) -PAD_CTL_SRE_FAST (0 << 2) -PAD_CTL_DSE_X1 (0 << 0) -PAD_CTL_DSE_X4 (1 << 0) -PAD_CTL_DSE_X2 (2 << 0) -PAD_CTL_DSE_X6 (3 << 0) - -Examples: -While iomuxc-lpsr is intended to be used by dedicated peripherals to take -advantages of LPSR power mode, is also possible that an IP to use pads from -any of the iomux controllers. For example the I2C1 IP can use SCL pad from -iomuxc-lpsr controller and SDA pad from iomuxc controller as: - -i2c1: i2c@30a20000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>; -}; - -iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - - pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = < - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f - >; - }; -}; - -iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_i2c1_2: i2c1grp-2 { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f - >; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml new file mode 100644 index 000000000000..621038662188 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX7D IOMUX Controller + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx7d-iomuxc + - fsl,imx7d-iomuxc-lpsr + + reg: + maxItems: 1 + + fsl,input-sel: + description: + phandle for main iomuxc controller which shares the input select + register for daisy chain settings. + $ref: /schemas/types.yaml#/definitions/phandle + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer + CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX7D Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - fsl,imx7d-iomuxc-lpsr + +then: + required: + - fsl,input-sel + +additionalProperties: false + +examples: + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart5: uart5grp { + fsl,pins = + <0x0160 0x03D0 0x0714 0x1 0x0 0x7e>, + <0x0164 0x03D4 0x0000 0x1 0x0 0x76>; + }; + }; + - | + iomuxc_lpsr: pinctrl@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + + pinctrl_gpio_lpsr: gpio1-grp { + fsl,pins = + <0x0008 0x0038 0x0000 0x0 0x0 0x59>, + <0x000C 0x003C 0x0000 0x0 0x0 0x59>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml new file mode 100644 index 000000000000..2e880b3e537c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MXRT1170 IOMUX Controller + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imxrt1170-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm/boot/dts/imxrt1170-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MXRT1170 Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iomuxc: iomuxc@400e8000 { + compatible = "fsl,imxrt1170-iomuxc"; + reg = <0x400e8000 0x4000>; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = + <0x16C 0x3B0 0x620 0x0 0x0 0xf1>, + <0x170 0x3B4 0x61C 0x0 0x0 0xf1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml new file mode 100644 index 000000000000..a651b2744caf --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell AC5 pin controller + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +description: + Bindings for Marvell's AC5 memory-mapped pin controller. + +properties: + compatible: + items: + - const: marvell,ac5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + marvell,function: + $ref: "/schemas/types.yaml#/definitions/string" + description: + Indicates the function to select. + enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, + spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + items: + enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9, + mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19, + mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29, + mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39, + mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0x80020100 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml new file mode 100644 index 000000000000..73ae6e11410b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6795 Pin Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Sean Wang <sean.wang@kernel.org> + +description: | + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6795-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: | + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: GPIO valid number range. + maxItems: 1 + + reg: + description: + Physical address base for gpio base and eint registers. + minItems: 2 + + reg-names: + items: + - const: base + - const: eint + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + } + }; + /* GPIO45 set as multifunction SDA0 */ + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO45__FUNC_SDA0>; + } + }; + }; + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h + directly. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt6795 pull down PUPD/R0/R1 type define value. + description: | + For normal pull down type, it is not necessary to specify R1R0 + values; When pull down type is PUPD/R0/R1, adding R1R0 defines + will set different resistance values. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt6795 pull up PUPD/R0/R1 type define value. + description: | + For normal pull up type, it is not necessary to specify R1R0 + values; When pull up type is PUPD/R0/R1, adding R1R0 defines + will set different resistance values. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pinmux + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/mt6795-pinfunc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6795-pinctrl"; + reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; + reg-names = "base", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 196>; + interrupt-controller; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + i2c0-pins { + pins-sda-scl { + pinmux = <PINMUX_GPIO45__FUNC_SDA0>, + <PINMUX_GPIO46__FUNC_SCL0>; + }; + }; + + mmc0-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO162__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt deleted file mode 100644 index 5d84fd299ccf..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ /dev/null @@ -1,42 +0,0 @@ -Microsemi Ocelot pin controller Device Tree Bindings ----------------------------------------------------- - -Required properties: - - compatible : Should be "mscc,ocelot-pinctrl", - "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl", - "mscc,luton-pinctrl", "mscc,serval-pinctrl", - "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl" - - reg : Address and length of the register set for the device - - gpio-controller : Indicates this device is a GPIO controller - - #gpio-cells : Must be 2. - The first cell is the pin number and the - second cell specifies GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. - - gpio-ranges : Range of pins managed by the GPIO controller. - - -The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin -configuration documented in pinctrl-bindings.txt. - -The following generic properties are supported: - - function - - pins - -Example: - gpio: pinctrl@71070034 { - compatible = "mscc,ocelot-pinctrl"; - reg = <0x71070034 0x28>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&gpio 0 0 22>; - - uart_pins: uart-pins { - pins = "GPIO_6", "GPIO_7"; - function = "uart"; - }; - - uart2_pins: uart2-pins { - pins = "GPIO_12", "GPIO_13"; - function = "uart2"; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml new file mode 100644 index 000000000000..98d547c34ef3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi Ocelot pin controller + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Lars Povlsen <lars.povlsen@microchip.com> + +properties: + compatible: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + - mscc,jaguar2-pinctrl + - mscc,luton-pinctrl + - mscc,ocelot-pinctrl + - mscc,serval-pinctrl + - mscc,servalt-pinctrl + + reg: + items: + - description: Base address + - description: Extended pin configuration registers + minItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + resets: + maxItems: 1 + + reset-names: + description: Optional shared switch reset. + items: + - const: switch + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: "pinmux-node.yaml" + - $ref: "pincfg-node.yaml" + + properties: + function: true + pins: true + output-high: true + output-low: true + drive-strength: true + + required: + - function + - pins + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +allOf: + - $ref: "pinctrl.yaml#" + - if: + properties: + compatible: + contains: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + then: + properties: + reg: + minItems: 2 + +additionalProperties: false + +examples: + - | + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index 3c84676a167d..c90a132fbc79 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -29,6 +29,8 @@ properties: description: gpio valid number range. maxItems: 1 + gpio-line-names: true + reg: description: | Physical address base for gpio base registers. There are 11 GPIO @@ -51,62 +53,92 @@ properties: #PIN CONFIGURATION NODES patternProperties: - '^pins': + '-pins$': type: object - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - state_0_node_a { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - }; - /* GPIO1 set as multifunction PWM */ - state_0_node_b { - pinmux = <PINMUX_GPIO1__FUNC_PWM_1>; - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. - - drive-strength: - description: | - It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See - dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - required: - - pinmux - additionalProperties: false + patternProperties: + '^pins': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See + dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,drive-strength-adv: + description: | + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + mediatek,pull-up-adv: + description: | + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false allOf: - $ref: "pinctrl.yaml#" @@ -151,8 +183,17 @@ examples: interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; #interrupt-cells = <2>; - pins { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - output-low; + spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO159__FUNC_SPI1_A_MO>, + <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; + bias-pull-down; + }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index fe2bcf0694d9..6f2efc3772cb 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -20,6 +20,7 @@ properties: - qcom,pm2250-gpio - qcom,pm660-gpio - qcom,pm660l-gpio + - qcom,pm6125-gpio - qcom,pm6150-gpio - qcom,pm6150l-gpio - qcom,pm6350-gpio @@ -32,6 +33,7 @@ properties: - qcom,pm8058-gpio - qcom,pm8150-gpio - qcom,pm8150b-gpio + - qcom,pm8150l-gpio - qcom,pm8226-gpio - qcom,pm8350-gpio - qcom,pm8350b-gpio @@ -49,10 +51,12 @@ properties: - qcom,pmi8994-gpio - qcom,pmi8998-gpio - qcom,pmk8350-gpio + - qcom,pmm8155au-gpio - qcom,pmr735a-gpio - qcom,pmr735b-gpio - qcom,pms405-gpio - qcom,pmx55-gpio + - qcom,pmx65-gpio - enum: - qcom,spmi-gpio @@ -71,6 +75,16 @@ properties: gpio-ranges: maxItems: 1 + gpio-line-names: + minItems: 2 + maxItems: 44 + + gpio-reserved-ranges: + minItems: 1 + # maxItems as half of total number of GPIOs, as there has to be at + # least one usable GPIO between each reserved range. + maxItems: 22 + '#gpio-cells': const: 2 description: @@ -87,13 +101,278 @@ required: - gpio-ranges - interrupt-controller +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8008-gpio + - qcom,pmi8950-gpio + then: + properties: + gpio-line-names: + minItems: 2 + maxItems: 2 + gpio-reserved-ranges: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8005-gpio + - qcom,pm8450-gpio + - qcom,pm8916-gpio + - qcom,pmk8350-gpio + - qcom,pmr735a-gpio + - qcom,pmr735b-gpio + then: + properties: + gpio-line-names: + minItems: 4 + maxItems: 4 + gpio-reserved-ranges: + minItems: 1 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8018-gpio + - qcom,pm8019-gpio + then: + properties: + gpio-line-names: + minItems: 6 + maxItems: 6 + gpio-reserved-ranges: + minItems: 1 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8350b-gpio + - qcom,pm8950-gpio + then: + properties: + gpio-line-names: + minItems: 8 + maxItems: 8 + gpio-reserved-ranges: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm6350-gpio + - qcom,pm8350c-gpio + then: + properties: + gpio-line-names: + minItems: 9 + maxItems: 9 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm2250-gpio + - qcom,pm6150-gpio + - qcom,pm7325-gpio + - qcom,pm8150-gpio + - qcom,pm8350-gpio + - qcom,pmc8180-gpio + - qcom,pmi8994-gpio + - qcom,pmm8155au-gpio + then: + properties: + gpio-line-names: + minItems: 10 + maxItems: 10 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx55-gpio + then: + properties: + gpio-line-names: + minItems: 11 + maxItems: 11 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-gpio + - qcom,pm6150l-gpio + - qcom,pm8038-gpio + - qcom,pm8150b-gpio + - qcom,pm8150l-gpio + - qcom,pmc8180c-gpio + - qcom,pms405-gpio + then: + properties: + gpio-line-names: + minItems: 12 + maxItems: 12 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660-gpio + then: + properties: + gpio-line-names: + minItems: 13 + maxItems: 13 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi8998-gpio + then: + properties: + gpio-line-names: + minItems: 14 + maxItems: 14 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx65-gpio + then: + properties: + gpio-line-names: + minItems: 16 + maxItems: 16 + gpio-reserved-ranges: + minItems: 1 + maxItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8994-gpio + - qcom,pma8084-gpio + then: + properties: + gpio-line-names: + minItems: 22 + maxItems: 22 + gpio-reserved-ranges: + minItems: 1 + maxItems: 11 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998-gpio + then: + properties: + gpio-line-names: + minItems: 26 + maxItems: 26 + gpio-reserved-ranges: + minItems: 1 + maxItems: 13 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 36 + gpio-reserved-ranges: + minItems: 1 + maxItems: 18 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8917-gpio + then: + properties: + gpio-line-names: + minItems: 38 + maxItems: 38 + gpio-reserved-ranges: + minItems: 1 + maxItems: 19 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8058-gpio + - qcom,pm8921-gpio + then: + properties: + gpio-line-names: + minItems: 44 + maxItems: 44 + gpio-reserved-ranges: + minItems: 1 + maxItems: 22 + patternProperties: '-state$': oneOf: - $ref: "#/$defs/qcom-pmic-gpio-state" - patternProperties: - ".*": + "(pinconf|-pins)$": $ref: "#/$defs/qcom-pmic-gpio-state" + additionalProperties: false $defs: qcom-pmic-gpio-state: @@ -106,6 +385,7 @@ $defs: description: List of gpio pins affected by the properties specified in this subnode. Valid pins are + - gpio1-gpio9 for pm6125 - gpio1-gpio10 for pm6150 - gpio1-gpio12 for pm6150l - gpio1-gpio9 for pm6350 @@ -134,12 +414,14 @@ $defs: - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio4 for pmk8350 + - gpio1-gpio10 for pmm8155au - gpio1-gpio4 for pmr735a - gpio1-gpio4 for pmr735b - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) + - gpio1-gpio16 for pmx65 items: pattern: "^gpio([0-9]+)$" @@ -174,6 +456,7 @@ $defs: bias-high-impedance: true input-enable: true + input-disable: true output-high: true output-low: true output-enable: true @@ -232,7 +515,7 @@ examples: #gpio-cells = <2>; pm8921_gpio_keys: gpio-keys-state { - volume-keys { + volume-keys-pins { pins = "gpio20", "gpio21"; function = "normal"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml index 206f4f238736..3f4f1c0360b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml @@ -42,8 +42,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..d32ee32776e8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivasa Rao Mandadapu <srivasam@codeaurora.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 6c7c3f6a140e..2d228164357c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -42,8 +42,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml index cfcde405d30a..a7a2bb8bff46 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml @@ -49,8 +49,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index 5c5542f1627c..06efb1382876 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index cfa2c50fdb93..15bb1018cf21 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -49,8 +49,7 @@ properties: gpio-ranges: maxItems: 1 - wakeup-parent: - maxItems: 1 + wakeup-parent: true #PIN CONFIGURATION NODES patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml index 780f15bb5e40..c88c8dcb69d9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -42,7 +42,6 @@ properties: description: Specifying the interrupt-controller used to wake up the system when the TLMM block has been powered down. - maxItems: 1 gpio-reserved-ranges: description: diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml new file mode 100644 index 000000000000..4d820df24b89 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink MT7620 Pin Controller + +maintainers: + - Arınç ÃœNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt7620-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ + # For MT7620 SoC + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, + uartf, uartlite, wdt, wled, + + # For MT7628 and MT7688 SoCs + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, + pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2, + wdt, wled_an, wled_kn, + ] + + function: + description: The mux function to select. + enum: [ + # For MT7620 SoC + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, + rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + wdt rst, wled, + + # For MT7628 and MT7688 SoCs + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, + p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, + refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, + ] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,mt7620-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml index 9de8b0c075e2..61e5c847e8c8 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml @@ -1,21 +1,23 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml# +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ralink rt2880 pinmux controller +title: Ralink MT7621 Pin Controller maintainers: + - Arınç ÃœNAL <arinc.unal@arinc9.com> - Sergio Paracuellos <sergio.paracuellos@gmail.com> description: - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins - is not supported. There is no pinconf support. + Ralink MT7621 pin controller for MT7621 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. properties: compatible: - const: ralink,rt2880-pinmux + const: ralink,mt7621-pinctrl patternProperties: '-pins$': @@ -28,14 +30,15 @@ patternProperties: properties: groups: - description: Name of the pin group to use for the functions. - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, - uart1, uart2, uart3, wdt] + description: The pin group to select. + enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1, + uart2, uart3, wdt] + function: - description: The mux function to select + description: The mux function to select. enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, - spi, uart1, uart2, uart3, wdt refclk, wdt rst] + pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi, + uart1, uart2, uart3, wdt refclk, wdt rst] required: - groups @@ -57,7 +60,7 @@ examples: # Pinmux controller node - | pinctrl { - compatible = "ralink,rt2880-pinmux"; + compatible = "ralink,mt7621-pinctrl"; i2c_pins: i2c0-pins { pinmux { diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml new file mode 100644 index 000000000000..56e5becabcfd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT2880 Pin Controller + +maintainers: + - Arınç ÃœNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: + Ralink RT2880 pin controller for RT2880 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt2880-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci] + + function: + description: The mux function to select. + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt2880-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml new file mode 100644 index 000000000000..425401c54269 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT305X Pin Controller + +maintainers: + - Arınç ÃœNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: + Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350 + SoCs. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt305x-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ + # For RT3050, RT3052 and RT3350 SoCs + i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite, + + # For RT3352 SoC + i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, + uartlite, + + # For RT5350 SoC + i2c, jtag, led, spi, spi_cs1, uartf, uartlite, + ] + + function: + description: The mux function to select. + enum: [ + # For RT3050, RT3052 and RT3350 SoCs + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, + pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite, + + # For RT3352 SoC + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, + pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, + uartlite, wdg_cs1, + + # For RT5350 SoC + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, + pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1, + ] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt305x-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml new file mode 100644 index 000000000000..feb6e66dcb61 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT3883 Pin Controller + +maintainers: + - Arınç ÃœNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: + Ralink RT3883 pin controller for RT3883 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt3883-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf, + uartlite] + + function: + description: The mux function to select. + enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, + lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2, + pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,rt3883-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 9ccf54870aa4..52df1b146174 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -11,8 +11,8 @@ maintainers: - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> description: - The Renesas SoCs of the RZ/{G2L,V2L} series feature a combined Pin and GPIO - controller. + The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and + GPIO controller. Pin multiplexing and GPIO configuration is performed on a per-pin basis. Each port features up to 8 pins, each of them configurable for GPIO function (port mode) or in alternate function mode. @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - items: diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index b0eae3a67ab1..677a285ca416 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -33,6 +33,7 @@ properties: enum: - rockchip,px30-pinctrl - rockchip,rk2928-pinctrl + - rockchip,rk3036-pinctrl - rockchip,rk3066a-pinctrl - rockchip,rk3066b-pinctrl - rockchip,rk3128-pinctrl @@ -44,6 +45,7 @@ properties: - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl - rockchip,rk3568-pinctrl + - rockchip,rk3588-pinctrl - rockchip,rv1108-pinctrl rockchip,grf: @@ -129,7 +131,7 @@ additionalProperties: description: Pin bank index. - minimum: 0 - maximum: 6 + maximum: 10 description: Mux 0 means GPIO and mux 1 to N means the specific device function. diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml index 7657721a4e96..86e5f6513bb3 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -40,4 +40,3 @@ examples: #power-domain-cells = <1>; }; }; - diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml index 3301fa0c2653..301db7daf870 100644 --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml @@ -51,6 +51,7 @@ properties: supported by the CPR power domain. acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to the syscon used for writing ACC settings. nvmem-cells: diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 940e97b565bf..ad77a6380f38 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -27,12 +27,15 @@ properties: - qcom,msm8998-rpmpd - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd + - qcom,sa8540p-rpmhpd - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd - qcom,sc7280-rpmhpd - qcom,sc8180x-rpmhpd + - qcom,sc8280xp-rpmhpd - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd + - qcom,sdx65-rpmhpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml index 62a49ca319ec..8d56bedd3390 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -10,9 +10,11 @@ maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> - Magnus Damm <magnus.damm@gmail.com> -description: +description: | The R-Car (RZ/G) System Controller provides power management for the CPU cores and various coprocessors. + The power domain IDs for consumers are defined in header files:: + include/dt-bindings/power/r8*-sysc.h properties: compatible: @@ -42,6 +44,7 @@ properties: - renesas,r8a77995-sysc # R-Car D3 - renesas,r8a779a0-sysc # R-Car V3U - renesas,r8a779f0-sysc # R-Car S4-8 + - renesas,r8a779g0-sysc # R-Car V4H reg: maxItems: 1 @@ -64,14 +67,3 @@ examples: reg = <0xe6180000 0x0200>; #power-domain-cells = <1>; }; - - - | - // Power Domain consumers - #include <dt-bindings/power/r8a7791-sysc.h> - - cache-controller-0 { - compatible = "cache"; - power-domains = <&sysc R8A7791_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index d56ac484fec5..491488e7b970 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -85,8 +85,13 @@ properties: description: battery factory internal resistance resistance-temp-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: the temperature in degree Celsius + - description: battery internal resistance percent description: | - An array providing the temperature in degree Celsius + A table providing the temperature in degree Celsius and corresponding battery internal resistance percent, which is used to look up the resistance percent according to current temperature to get an accurate batterty internal resistance in different temperatures. diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml index c863cfa67865..fbb2204769aa 100644 --- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml @@ -36,6 +36,7 @@ properties: cm-poll-mode: description: polling mode + $ref: /schemas/types.yaml#/definitions/uint32 default: 0 enum: - 0 # disabled diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 2dda91587dc3..dc697b6147b2 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -78,4 +78,3 @@ examples: power-supplies = <&mains_charger>, <&usb_charger>; }; }; - diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index 531b67225c74..9a490fbd32e1 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -19,4 +19,3 @@ properties: supply it power, referenced by their phandles. additionalProperties: true - diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml index a23f6653f332..93654e732cda 100644 --- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml @@ -87,4 +87,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml index a33408c3a407..2c2fe883bb48 100644 --- a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml @@ -24,7 +24,7 @@ properties: items: - const: USB - const: AC - + required: - compatible - interrupts diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt deleted file mode 100644 index 781955f5217d..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Freescale PQ3 and QorIQ based Cache SRAM - -Freescale's mpc85xx and some QorIQ platforms provide an -option of configuring a part of (or full) cache memory -as SRAM. This cache SRAM representation in the device -tree should be done as under:- - -Required properties: - -- compatible : should be "fsl,p2020-cache-sram" -- fsl,cache-sram-ctlr-handle : points to the L2 controller -- reg : offset and length of the cache-sram. - -Example: - -cache-sram@fff00000 { - fsl,cache-sram-ctlr-handle = <&L2>; - reg = <0 0xfff00000 0 0x10000>; - compatible = "fsl,p2020-cache-sram"; -}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt index d722ae3be363..25ecfe14c698 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Shall contain "ti,omap-dmtimer-pwm". -- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer.txt for info +- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info about these timers. - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index f052e03be402..6a9a7eed466f 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -12,7 +12,7 @@ description: resides as a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and RPM nodes be present. - Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for information pertaining to the SMD node. Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -69,7 +69,8 @@ description: l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 maintainers: - - Kathiravan T <kathirav@codeaurora.org> + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml index 75087c6e001c..c0acf949753d 100644 --- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml @@ -104,4 +104,3 @@ examples: resets = <&sys_rst 14>; }; }; - diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml index 836d4156d54c..a5a27ee0a9e6 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -51,4 +51,3 @@ examples: }; ... - diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 8f1507052afd..b677900b3aae 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -250,7 +250,7 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain: The Hexagon node may also have an subnode named either "smd-edge" or "glink-edge" that describes the communication edge, channels and devices -related to the Hexagon. See ../soc/qcom/qcom,smd.txt and +related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and ../soc/qcom/qcom,glink.txt for details on how to describe these. = EXAMPLE diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt index a83080b8905c..ac423f4c3f1b 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt @@ -111,7 +111,7 @@ and its resource dependencies. It is described by the following properties: The wcnss node can also have an subnode named "smd-edge" that describes the SMD edge, channels and devices related to the WCNSS. -See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge. +See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge. = EXAMPLE The following example describes the resources needed to boot control the WCNSS, diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml index f4c351a69542..0391871cf44d 100644 --- a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml @@ -142,4 +142,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml new file mode 100644 index 000000000000..4379cec6b35a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Reset Manager + +maintainers: + - Dinh Nguyen <dinguyen@altera.com> + +properties: + compatible: + oneOf: + - description: Cyclone5/Arria5/Arria10 + const: altr,rst-mgr + - description: Stratix10 ARM64 SoC + items: + - const: altr,stratix10-rst-mgr + - const: altr,rst-mgr + + reg: + maxItems: 1 + + altr,modrst-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset of the first modrst register + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - altr,modrst-offset + - '#reset-cells' + +additionalProperties: false + +examples: + - | + rstmgr@ffd05000 { + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt deleted file mode 100644 index 43e580ef64ba..000000000000 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic audio memory arbiter controller - -The Amlogic Audio ARB is a simple device which enables or -disables the access of Audio FIFOs to DDR on AXG based SoC. - -Required properties: -- compatible: 'amlogic,meson-axg-audio-arb' or - 'amlogic,meson-sm1-audio-arb' -- reg: physical base address of the controller and length of memory - mapped region. -- clocks: phandle to the fifo peripheral clock provided by the audio - clock controller. -- #reset-cells: must be 1. - -Example on the A113 SoC: - -arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; -}; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml new file mode 100644 index 000000000000..704a502adc5d --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic audio memory arbiter controller + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +description: The Amlogic Audio ARB is a simple device which enables or disables + the access of Audio FIFOs to DDR on AXG based SoC. + +properties: + compatible: + enum: + - amlogic,meson-axg-audio-arb + - amlogic,meson-sm1-audio-arb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + phandle to the fifo peripheral clock provided by the audio clock + controller. + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#reset-cells" + +additionalProperties: false + +examples: + - | + // on the A113 SoC: + #include <dt-bindings/clock/axg-audio-clkc.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index 92922d3afd14..494a454928ce 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -17,6 +17,7 @@ properties: - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs + - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt deleted file mode 100644 index 4c56330bf398..000000000000 --- a/Documentation/devicetree/bindings/reset/ath79-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset" - as fallback -- reg: Base address and size of the controllers memory area -- #reset-cells : Specifies the number of cells needed to encode reset - line, should be 1 - -Example: - - reset-controller@1806001c { - compatible = "qca,ar9132-reset", "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/reset/berlin,reset.txt b/Documentation/devicetree/bindings/reset/berlin,reset.txt deleted file mode 100644 index 514fee098b4b..000000000000 --- a/Documentation/devicetree/bindings/reset/berlin,reset.txt +++ /dev/null @@ -1,23 +0,0 @@ -Marvell Berlin reset controller -=============================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller node must be a sub-node of the chip controller -node on Berlin SoCs. - -Required properties: -- compatible: should be "marvell,berlin2-reset" -- #reset-cells: must be set to 2 - -Example: - -chip_rst: reset { - compatible = "marvell,berlin2-reset"; - #reset-cells = <2>; -}; - -&usb_phy0 { - resets = <&chip_rst 0x104 12>; -}; diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt deleted file mode 100644 index a6f8455ae6c4..000000000000 --- a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt +++ /dev/null @@ -1,18 +0,0 @@ -Bitmain BM1880 SoC Reset Controller -=================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "bitmain,bm1880-reset" -- reg: Offset and length of reset controller space in SCTRL. -- #reset-cells: Must be 1. - -Example: - - rst: reset-controller@c00 { - compatible = "bitmain,bm1880-reset"; - reg = <0xc00 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml new file mode 100644 index 000000000000..f0aca744388c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Bitmain BM1880 SoC Reset Controller + +maintainers: + - Manivannan Sadhasivam <mani@kernel.org> + +properties: + compatible: + const: bitmain,bm1880-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt deleted file mode 100644 index ea0a6a9734c1..000000000000 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt +++ /dev/null @@ -1,37 +0,0 @@ -Hisilicon System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller registers are part of the system-ctl block on -hi6220 SoC. - -Required properties: -- compatible: should be one of the following: - - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller. - - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller. - - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller. -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below - -Example: -sys_ctrl: sys_ctrl@f7030000 { - compatible = "hisilicon,hi6220-sysctrl", "syscon"; - reg = <0x0 0xf7030000 0x0 0x2000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== -example: - - uart1: serial@..... { - ... - resets = <&sys_ctrl PERIPH_RSTEN3_UART1>; - ... - }; - -The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>. diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt deleted file mode 100644 index c6aef36b7d15..000000000000 --- a/Documentation/devicetree/bindings/reset/lantiq,reset.txt +++ /dev/null @@ -1,30 +0,0 @@ -Lantiq XWAY SoC RCU reset controller binding -============================================ - -This binding describes a reset-controller found on the RCU module on Lantiq -XWAY SoCs. - -This node has to be a sub node of the Lantiq RCU block. - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,danube-reset" - "lantiq,xrx200-reset" -- reg : Defines the following sets of registers in the parent - syscon device - - Offset of the reset set register - - Offset of the reset status register -- #reset-cells : Specifies the number of cells needed to encode the - reset line, should be 2. - The first cell takes the reset set bit and the - second cell takes the status bit. - -------------------------------------------------------------------------------- -Example for the reset-controllers on the xRX200 SoCs: - reset0: reset-controller@10 { - compatible = "lantiq,xrx200-reset"; - reg <0x10 0x04>, <0x14 0x04>; - - #reset-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml new file mode 100644 index 000000000000..15d65a5dd631 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq XWAY SoC RCU reset controller + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: | + This binding describes a reset-controller found on the RCU module on Lantiq + XWAY SoCs. This node has to be a sub node of the Lantiq RCU block. + +properties: + compatible: + enum: + - lantiq,danube-reset + - lantiq,xrx200-reset + + reg: + description: | + Defines the following sets of registers in the parent syscon device + Offset of the reset set register + Offset of the reset status register + maxItems: 2 + + '#reset-cells': + description: | + The first cell takes the reset set bit and the second cell takes the + status bit. + const: 2 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + // On the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 0x04>, <0x14 0x04>; + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml new file mode 100644 index 000000000000..d71d0f0a13ee --- /dev/null +++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Antoine Tenart <atenart@kernel.org> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell Berlin reset controller + +maintainers: + - Antoine Tenart <atenart@kernel.org> + +description: The reset controller node must be a sub-node of the chip + controller node on Berlin SoCs. + +properties: + compatible: + const: marvell,berlin2-reset + + "#reset-cells": + const: 2 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + chip: chip-control@ea0000 { + reg = <0xea0000 0x400>; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml index 578bfa529b16..81cd8c837623 100644 --- a/Documentation/devicetree/bindings/reset/microchip,rst.yaml +++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml @@ -57,4 +57,3 @@ examples: #reset-cells = <1>; cpu-syscon = <&cpu_ctrl>; }; - diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt deleted file mode 100644 index 17b7a6a43a29..000000000000 --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt +++ /dev/null @@ -1,32 +0,0 @@ -Nuvoton NPCM Reset controller - -Required properties: -- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC -- reg : specifies physical base address and size of the register. -- #reset-cells: must be set to 2 - -Optional property: -- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. - NPCM7xx contain four software reset that represent numbers 1 to 4. - - If 'nuvoton,sw-reset-number' is not specified software reset is disabled. - -Example: - rstc: rstc@f0801000 { - compatible = "nuvoton,npcm750-reset"; - reg = <0xf0801000 0x70>; - #reset-cells = <2>; - nuvoton,sw-reset-number = <2>; - }; - -Specifying reset lines connected to IP NPCM7XX modules -====================================================== -example: - - spi0: spi@..... { - ... - resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; - ... - }; - -The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>. diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml new file mode 100644 index 000000000000..fa5e4ea6400e --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Reset controller + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +properties: + compatible: + const: nuvoton,npcm750-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 2 + + nuvoton,sw-reset-number: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + description: | + Contains the software reset number to restart the SoC. + If not specified, software reset is disabled. + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm750-reset"; + reg = <0xf0801000 0x70>; + #reset-cells = <2>; + nuvoton,sw-reset-number = <2>; + }; + + // Specifying reset lines connected to IP NPCM7XX modules + spi0: spi { + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml new file mode 100644 index 000000000000..9be60e55cd71 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Alban Bedel <albeu@free.fr> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Atheros AR7xxx/AR9XXX reset controller + +maintainers: + - Alban Bedel <albeu@free.fr> + +properties: + compatible: + items: + - enum: + - qca,ar9132-reset + - qca,ar9331-reset + - const: qca,ar7100-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@1806001c { + compatible = "qca,ar9132-reset", "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml index bbe313bf1796..0d1b89e2fe9c 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -49,6 +49,7 @@ properties: - renesas,r8a77995-rst # R-Car D3 - renesas,r8a779a0-rst # R-Car V3U - renesas,r8a779f0-rst # R-Car S4-8 + - renesas,r8a779g0-rst # R-Car V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt deleted file mode 100644 index 32d8435a41df..000000000000 --- a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for the AXS10x reset controller - -This binding describes the ARC AXS10x boards custom IP-block which allows -to control reset signals of selected peripherals. For example DW GMAC, etc... -This block is controlled via memory-mapped register (AKA CREG) which -represents up-to 32 reset lines. - -As of today only the following lines are used: - - DW GMAC - line 5 - -This binding uses the common reset binding[1]. - -[1] Documentation/devicetree/bindings/reset/reset.txt - -Required properties: -- compatible: should be "snps,axs10x-reset". -- reg: should always contain pair address - length: for creg reset - bits register. -- #reset-cells: from common reset binding; Should always be set to 1. - -Example: - reset: reset-controller@11220 { - compatible = "snps,axs10x-reset"; - #reset-cells = <1>; - reg = <0x11220 0x4>; - }; - -Specifying reset lines connected to IP modules: - ethernet@.... { - .... - resets = <&reset 5>; - .... - }; diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml new file mode 100644 index 000000000000..a75db3d405af --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXS10x reset controller + +maintainers: + - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + +description: | + This binding describes the ARC AXS10x boards custom IP-block which allows + to control reset signals of selected peripherals. For example DW GMAC, etc... + This block is controlled via memory-mapped register (AKA CREG) which + represents up-to 32 reset lines. + As of today only the following lines are used: + - DW GMAC - line 5 + +properties: + compatible: + const: snps,axs10x-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + + // Specifying reset lines connected to IP modules: + ethernet { + resets = <&reset 5>; + }; diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt deleted file mode 100644 index 38fe34fd8b8a..000000000000 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ /dev/null @@ -1,16 +0,0 @@ -Altera SOCFPGA Reset Manager - -Required properties: -- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) - "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC -- reg : Should contain 1 register ranges(address and length) -- altr,modrst-offset : Should contain the offset of the first modrst register. -- #reset-cells: 1 - -Example: - rstmgr@ffd05000 { - #reset-cells = <1>; - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - altr,modrst-offset = <0x10>; - }; diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml index bfbd3e9b4186..0a2c13e1e230 100644 --- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml +++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml @@ -38,25 +38,49 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + reset-names: true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-reset + - socionext,uniphier-pro5-usb3-reset + - socionext,uniphier-pro4-ahci-reset + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link additionalProperties: false diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt deleted file mode 100644 index 9ca27761f811..000000000000 --- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt +++ /dev/null @@ -1,42 +0,0 @@ -STMicroelectronics STi family Sysconfig Picophy SoftReset Controller -============================================================================= - -This binding describes a reset controller device that is used to enable and -disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in -the STi family SoC system configuration registers. - -The actual action taken when softreset is asserted is hardware dependent. -However, when asserted it may not be possible to access the hardware's -registers and after an assert/deassert sequence the hardware's previous state -may no longer be valid. - -Please refer to Documentation/devicetree/bindings/reset/reset.txt -for common reset controller binding usage. - -Required properties: -- compatible: Should be "st,stih407-picophyreset" -- #reset-cells: 1, see below - -Example: - - picophyreset: picophyreset-controller { - compatible = "st,stih407-picophyreset"; - #reset-cells = <1>; - }; - -Specifying picophyreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the picophyreset device node and an -index specifying which channel to use, as described in -Documentation/devicetree/bindings/reset/reset.txt. - -Example: - - usb2_picophy0: usbpicophy@0 { - resets = <&picophyreset STIH407_PICOPHY0_RESET>; - }; - -Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset/stih407-resets.h diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt deleted file mode 100644 index 92527138bc93..000000000000 --- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +++ /dev/null @@ -1,45 +0,0 @@ -STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller -============================================================================= - -This binding describes a reset controller device that is used to enable and -disable on-chip peripheral controllers such as USB and SATA, using -"powerdown" control bits found in the STi family SoC system configuration -registers. These have been grouped together into a single reset controller -device for convenience. - -The actual action taken when powerdown is asserted is hardware dependent. -However, when asserted it may not be possible to access the hardware's -registers and after an assert/deassert sequence the hardware's previous state -may no longer be valid. - -Please refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "st,stih407-powerdown" -- #reset-cells: 1, see below - -example: - - powerdown: powerdown-controller { - compatible = "st,stih407-powerdown"; - #reset-cells = <1>; - }; - - -Specifying powerdown control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the powerdown device node and an -index specifying which channel to use, as described in reset.txt - -example: - - st_dwc3: dwc3@8f94000 { - resets = <&powerdown STIH407_USB3_POWERDOWN>, - }; - -Macro definitions for the supported reset channels can be found in: - -include/dt-bindings/reset/stih407-resets.h diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml new file mode 100644 index 000000000000..329ae4ae1a10 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in + the STi family SoC system configuration registers. + + The actual action taken when softreset is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-picophyreset + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/stih407-resets.h> + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + + // Specifying picophyreset control of devices + usb2_picophy0: usbpicophy { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml new file mode 100644 index 000000000000..d3790e602659 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@st.com> + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip peripheral controllers such as USB and SATA, using + "powerdown" control bits found in the STi family SoC system configuration + registers. These have been grouped together into a single reset controller + device for convenience. + + The actual action taken when powerdown is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-powerdown + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/stih407-resets.h> + + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + // Specifying powerdown control of devices: + st_dwc3: dwc3 { + resets = <&powerdown STIH407_USB3_POWERDOWN>; + }; diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml index 61963fa9347e..067e71e8ebe8 100644 --- a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml +++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml @@ -33,4 +33,3 @@ examples: compatible = "intel,ixp46x-rng"; reg = <0x70002100 4>; }; - diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml index 9a6e4eaf4d3c..fcd86f822a9c 100644 --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml @@ -27,6 +27,7 @@ properties: maxItems: 1 clock-error-detect: + type: boolean description: If set enable the clock detection management required: diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt deleted file mode 100644 index b8d36fce5e2d..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc.txt +++ /dev/null @@ -1 +0,0 @@ -This file has been moved to rtc.yaml. diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 3bab2f27b970..5f6b113d378f 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -138,6 +138,7 @@ properties: description: The current active speed of the UART. reg-offset: + $ref: /schemas/types.yaml#/definitions/uint32 description: | Offset to apply to the mapbase from the start of the registers. diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt deleted file mode 100644 index 9d098cf73b53..000000000000 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ /dev/null @@ -1,81 +0,0 @@ -* MSM Serial UARTDM - -The MSM serial UARTDM hardware is designed for high-speed use cases where the -transmit and/or receive channels can be offloaded to a dma-engine. From a -software perspective it's mostly compatible with the MSM serial UART except -that it supports reading and writing multiple characters at a time. - -Required properties: -- compatible: Should contain at least "qcom,msm-uartdm". - A more specific property should be specified as follows depending - on the version: - "qcom,msm-uartdm-v1.1" - "qcom,msm-uartdm-v1.2" - "qcom,msm-uartdm-v1.3" - "qcom,msm-uartdm-v1.4" -- reg: Should contain UART register locations and lengths. The first - register shall specify the main control registers. An optional second - register location shall specify the GSBI control region. - "qcom,msm-uartdm-v1.3" is the only compatible value that might - need the GSBI control region. -- interrupts: Should contain UART interrupt. -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -Optional properties: -- dmas: Should contain dma specifiers for transmit and receive channels -- dma-names: Should contain "tx" for transmit and "rx" for receive channels -- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be - used with TX DMA channel. Required when using DMA for transmission - with UARTDM v1.3 and below. -- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be - used with RX DMA channel. Required when using DMA for reception - with UARTDM v1.3 and below. - -Note: Aliases may be defined to ensure the correct ordering of the UARTs. -The alias serialN will result in the UART being assigned port N. If any -serialN alias exists, then an alias must exist for each enabled UART. The -serialN aliases should be in a .dts file instead of in a .dtsi file. - -Examples: - -- A uartdm v1.4 device with dma capabilities. - - serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = <0 108 0x0>; - clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; - clock-names = "core", "iface"; - dmas = <&dma0 0>, <&dma0 1>; - dma-names = "tx", "rx"; - }; - -- A uartdm v1.3 device without dma capabilities and part of a GSBI complex. - - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>; - clock-names = "core", "iface"; - }; - -- serialN alias. - - aliases { - serial0 = &uarta; - serial1 = &uartc; - serial2 = &uartb; - }; - - uarta: serial@12490000 { - }; - - uartb: serial@16340000 { - }; - - uartc: serial@1a240000 { - }; diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml new file mode 100644 index 000000000000..484b9a51f6a9 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM Serial UARTDM + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + The MSM serial UARTDM hardware is designed for high-speed use cases where the + transmit and/or receive channels can be offloaded to a dma-engine. From a + software perspective it's mostly compatible with the MSM serial UART except + that it supports reading and writing multiple characters at a time. + + Note:: Aliases may be defined to ensure the correct ordering of the UARTs. + The alias serialN will result in the UART being assigned port N. If any + serialN alias exists, then an alias must exist for each enabled UART. The + serialN aliases should be in a .dts file instead of in a .dtsi file. + +properties: + compatible: + items: + - enum: + - qcom,msm-uartdm-v1.1 + - qcom,msm-uartdm-v1.2 + - qcom,msm-uartdm-v1.3 + - qcom,msm-uartdm-v1.4 + - const: qcom,msm-uartdm + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + qcom,rx-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Identificator for Client Rate Control Interface to be used with RX DMA + channel. Required when using DMA for reception with UARTDM v1.3 and + below. + + qcom,tx-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Identificator for Client Rate Control Interface to be used with TX DMA + channel. Required when using DMA for transmission with UARTDM v1.3 and + below. + + reg: + minItems: 1 + items: + - description: Main control registers + - description: An optional second register location shall specify the GSBI control region. + +required: + - compatible + - clock-names + - clocks + - interrupts + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/serial/serial.yaml# + + - if: + properties: + compatible: + contains: + const: qcom,msm-uartdm-v1.3 + then: + properties: + reg: + minItems: 2 + else: + properties: + reg: + maxItems: 1 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>; + clock-names = "core", "iface"; + dmas = <&dma0 0>, <&dma0 1>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index a444bebd2c1a..da0e2745b5fc 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -35,7 +35,7 @@ properties: clock-names: description: | - "enable" for UART module enable clock, "uart" for UART clock, "source" + "enable" for UART module enable clock, "uart" for UART clock, "source" for UART source (parent) clock. items: - const: enable diff --git a/Documentation/devicetree/bindings/serio/arm,pl050.yaml b/Documentation/devicetree/bindings/serio/arm,pl050.yaml new file mode 100644 index 000000000000..d80f58d15497 --- /dev/null +++ b/Documentation/devicetree/bindings/serio/arm,pl050.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serio/arm,pl050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd. PrimeCell PL050 PS/2 Keyboard/Mouse Interface + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm PrimeCell PS2 Keyboard/Mouse Interface (KMI) is an AMBA compliant + peripheral that can be used to implement a keyboard or mouse interface that + is IBM PS2 or AT compatible. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl050 + required: + - compatible + +properties: + compatible: + items: + - const: arm,pl050 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: KMI reference clock, used to generate the bus timing + - description: APB register access clock + + clock-names: + items: + - const: KMIREFCLK + - const: apb_pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + serio@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index 02b2d5ba01d6..17db87cb9dab 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -48,4 +48,3 @@ examples: compatible = "amlogic,canvas"; reg = <0x48 0x14>; }; - diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml new file mode 100644 index 000000000000..397f75909b20 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Device Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + DCFG is the device configuration unit, that provides general purpose + configuration and status for the device. Such as setting the secondary + core start address and release the secondary core from holdoff and + startup. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,ls1012a-dcfg + - fsl,ls1021a-dcfg + - fsl,ls1043a-dcfg + - fsl,ls1046a-dcfg + - fsl,ls1088a-dcfg + - fsl,ls2080a-dcfg + - fsl,lx2160a-dcfg + - const: syscon + + - items: + - enum: + - fsl,ls1028a-dcfg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^clock-controller@[0-9a-z]+$": + $ref: /schemas/clock/fsl,flexspi-clock.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x1ee0000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml new file mode 100644 index 000000000000..8d088b5fe823 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Supplemental Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + SCFG is the supplemental configuration unit, that provides SoC specific + configuration and status registers for the chip. Such as getting PEX port + status. + +properties: + compatible: + items: + - enum: + - fsl,ls1012a-scfg + - fsl,ls1021a-scfg + - fsl,ls1028a-scfg + - fsl,ls1043a-scfg + - fsl,ls1046a-scfg + - const: syscon + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^interrupt-controller@[a-z0-9]+$": + $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x1570000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml new file mode 100644 index 000000000000..563e1d0e327f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HDMI blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display pipeline + peripherals located in the HDMI domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hdmi-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 8 + maxItems: 8 + + power-domain-names: + items: + - const: bus + - const: irqsteer + - const: lcdif + - const: pai + - const: pvi + - const: trng + - const: hdmi-tx + - const: hdmi-tx-phy + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: apb + - const: axi + - const: ref_266m + - const: ref_24m + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32fc0000 { + compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon"; + reg = <0x32fc0000 0x23c>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "axi", "ref_266m", "ref_24m"; + power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmi_phy>; + power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", + "hdmi-tx", "hdmi-tx-phy"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml new file mode 100644 index 000000000000..21d3ee486295 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP Media Block Control + +maintainers: + - Paul Elder <paul.elder@ideasonboard.com> + +description: + The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral + providing access to the NoC and ensuring proper power sequencing of the + peripherals within the MEDIAMIX domain. + +properties: + compatible: + items: + - const: fsl,imx8mp-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 10 + + power-domain-names: + items: + - const: bus + - const: mipi-dsi1 + - const: mipi-csi1 + - const: lcdif1 + - const: isi + - const: mipi-csi2 + - const: lcdif2 + - const: isp + - const: dwe + - const: mipi-dsi2 + + clocks: + items: + - description: The APB clock + - description: The AXI clock + - description: The pixel clock for the first CSI2 receiver (aclk) + - description: The pixel clock for the second CSI2 receiver (aclk) + - description: The pixel clock for the first LCDIF (pix_clk) + - description: The pixel clock for the second LCDIF (pix_clk) + - description: The core clock for the ISP (clk) + - description: The MIPI-PHY reference clock used by DSI + + clock-names: + items: + - const: apb + - const: axi + - const: cam1 + - const: cam2 + - const: disp1 + - const: disp2 + - const: isp + - const: phy + +required: + - compatible + - reg + - '#power-domain-cells' + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + media_blk_ctl: blk-ctl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; + reg = <0x32ec0000 0x138>; + power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>, + <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>, + <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>, + <&mipi_phy2_pd>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi", + "mipi-csi2", "lcdif2", "isp1", "dwe", "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", + "isp", "phy"; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 214a34633824..0581dbda4828 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -31,20 +31,20 @@ Required properties in pwrap device node. "mediatek,mt8195-pwrap" for MT8195 SoCs "mediatek,mt8516-pwrap" for MT8516 SoCs - interrupts: IRQ for pwrap in SOC -- reg-names: Must include the following entries: +- reg-names: "pwrap" is required; "pwrap-bridge" is optional. "pwrap": Main registers base "pwrap-bridge": bridge base (IP Pairing) - reg: Must contain an entry for each entry in reg-names. -- reset-names: Must include the following entries: - "pwrap" - "pwrap-bridge" (IP Pairing) -- resets: Must contain an entry for each entry in reset-names. - clock-names: Must include the following entries: "spi": SPI bus clock "wrap": Main module clock - clocks: Must contain an entry for each entry in clock-names. Optional properities: +- reset-names: Some SoCs include the following entries: + "pwrap" + "pwrap-bridge" (IP Pairing) +- resets: Must contain an entry for each entry in reset-names. - pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 95fcb43675d6..2bf5293fc995 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -7,8 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: GENI Serial Engine QUP Wrapper Controller maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> description: | Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper @@ -64,116 +63,23 @@ required: - ranges patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: Common properties for GENI Serial Engine based I2C, SPI and - UART controller. - - properties: - reg: - description: GENI Serial Engine register address and length. - maxItems: 1 - - clock-names: - const: se - - clocks: - description: Serial engine core clock needed by the device. - maxItems: 1 - - interconnects: - minItems: 2 - maxItems: 3 - - interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory - - required: - - reg - - clock-names - - clocks - "spi@[0-9a-f]+$": type: object description: GENI serial engine based SPI controller. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - $ref: /schemas/spi/spi-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-spi - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# "i2c@[0-9a-f]+$": type: object description: GENI serial engine based I2C controller. - $ref: /schemas/i2c/i2c-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-i2c - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - clock-frequency: - description: Desired I2C bus clock frequency in Hz. - default: 100000 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# "serial@[0-9a-f]+$": type: object description: GENI Serial Engine based UART Controller. - $ref: /schemas/serial.yaml# - - properties: - compatible: - enum: - - qcom,geni-uart - - qcom,geni-debug-uart - - interrupts: - minItems: 1 - items: - - description: UART core irq - - description: Wakeup irq (RX GPIO) - - required: - - compatible - - interrupts + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt deleted file mode 100644 index fe1855f09dcc..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ /dev/null @@ -1,87 +0,0 @@ -QCOM GSBI (General Serial Bus Interface) Driver - -The GSBI controller is modeled as a node with zero or more child nodes, each -representing a serial sub-node device that is mux'd as part of the GSBI -configuration settings. The mode setting will govern the input/output mode of -the 4 GSBI IOs. - -Required properties: -- compatible: Should contain "qcom,gsbi-v1.0.0" -- cell-index: Should contain the GSBI index -- reg: Address range for GSBI registers -- clocks: required clock -- clock-names: must contain "iface" entry -- qcom,mode : indicates MUX value for configuration of the serial interface. - Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values. - -Optional properties: -- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference - dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. -- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses - dma. - -Required properties if child node exists: -- #address-cells: Must be 1 -- #size-cells: Must be 1 -- ranges: Must be present - -Properties for children: - -A GSBI controller node can contain 0 or more child nodes representing serial -devices. These serial devices can be a QCOM UART, I2C controller, spi -controller, or some combination of aforementioned devices. - -See the following for child node definitions: -Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt -Documentation/devicetree/bindings/spi/qcom,spi-qup.txt -Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt - -Example for APQ8064: - -#include <dt-bindings/soc/qcom,gsbi.h> - - gsbi4@16300000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <4>; - reg = <0x16300000 0x100>; - clocks = <&gcc GSBI4_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - qcom,mode = <GSBI_PROT_I2C_UART>; - qcom,crci = <GSBI_CRCI_QUP>; - - syscon-tcsr = <&tcsr>; - - /* child nodes go under here */ - - i2c_qup4: i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; - - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - - clock-frequency = <200000>; - - #address-cells = <1>; - #size-cells = <0>; - - }; - - uart4: serial@16340000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16340000 0x1000>, - <0x16300000 0x1000>; - interrupts = <0 152 0x0>; - clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - }; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,apq8064-tcsr", "syscon"; - reg = <0x1a400000 0x100>; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml new file mode 100644 index 000000000000..c33704333e49 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm General Serial Bus Interface (GSBI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The GSBI controller is modeled as a node with zero or more child nodes, each + representing a serial sub-node device that is mux'd as part of the GSBI + configuration settings. The mode setting will govern the input/output mode + of the 4 GSBI IOs. + + A GSBI controller node can contain 0 or more child nodes representing serial + devices. These serial devices can be a QCOM UART, I2C controller, spi + controller, or some combination of aforementioned devices. + +properties: + compatible: + const: qcom,gsbi-v1.0.0 + + '#address-cells': + const: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The GSBI index. + + clocks: + maxItems: 1 + + clock-names: + const: iface + + qcom,crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + CRCI MUX value for QUP CRCI ports. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + + qcom,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + MUX value for configuration of the serial interface. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid mux values. + + '#size-cells': + const: 1 + + syscon-tcsr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of TCSR syscon node.Required if child uses dma. + + ranges: true + + reg: + maxItems: 1 + +patternProperties: + "spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/qcom,spi-qup.yaml# + + "i2c@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/qcom,i2c-qup.yaml# + + "serial@[0-9a-f]+$": + type: object + $ref: /schemas/serial/qcom,msm-uartdm.yaml# + +required: + - compatible + - cell-index + - clocks + - clock-names + - qcom,mode + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8960.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,gsbi.h> + + gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* UART chosen */ + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml new file mode 100644 index 000000000000..f5ecf4a8c377 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -0,0 +1,272 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMH RSC + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Resource Power Manager Hardened (RPMH) is the mechanism for communicating + with the hardened resource accelerators on Qualcomm SoCs. Requests to the + resources can be written to the Trigger Command Set (TCS) registers and + using a (addr, val) pair and triggered. Messages in the TCS are then sent in + sequence over an internal bus. + + The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity + (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and + active/wake resource requests. Multiple such DRVs can exist in a SoC and can + be written to from Linux. The structure of each DRV follows the same template + with a few variations that are captured by the properties here. + + A TCS may be triggered from Linux or triggered by the F/W after all the CPUs + have powered off to facilitate idle power saving. TCS could be classified as:: + ACTIVE - Triggered by Linux + SLEEP - Triggered by F/W + WAKE - Triggered by F/W + CONTROL - Triggered by F/W + See also:: <dt-bindings/soc/qcom,rpmh-rsc.h> + + The order in which they are described in the DT, should match the hardware + configuration. + + Requests can be made for the state of a resource, when the subsystem is + active or idle. When all subsystems like Modem, GPU, CPU are idle, the + resource state will be an aggregate of the sleep votes from each of those + subsystems. Clients may request a sleep value for their shared resources in + addition to the active mode requests. + + Drivers that want to use the RSC to communicate with RPMH must specify their + bindings as child nodes of the RSC controllers they wish to communicate with. + +properties: + compatible: + const: qcom,rpmh-rsc + + interrupts: + minItems: 1 + maxItems: 4 + description: + The interrupt that trips when a message complete/response is received for + this DRV from the accelerators. + Number of interrupts must match number of DRV blocks. + + label: + description: + Name for the RSC. The name would be used in trace logs. + + qcom,drv-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The ID of the DRV in the RSC block that will be used by this controller. + + qcom,tcs-config: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3] + - description: Numbe r of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + description: | + The tuple defining the configuration of TCS. Must have two cells which + describe each TCS type. The order of the TCS must match the hardware + configuration. + Cell 1 (TCS Type):: TCS types to be specified:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + Cell 2 (Number of TCS):: <u32> + + qcom,tcs-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The offset of the TCS blocks. + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + items: + - const: drv-0 + - const: drv-1 + - const: drv-2 + - const: drv-3 + + bcm-voter: + $ref: /schemas/interconnect/qcom,bcm-voter.yaml# + + clock-controller: + $ref: /schemas/clock/qcom,rpmhcc.yaml# + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + +patternProperties: + '-regulators$': + $ref: /schemas/regulator/qcom,rpmh-regulator.yaml# + +required: + - compatible + - interrupts + - qcom,drv-id + - qcom,tcs-config + - qcom,tcs-offset + - reg + - reg-names + +additionalProperties: false + +examples: + - | + // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of + // 2, the register offsets for DRV2 start at 0D00, the register + // calculations are like this:: + // DRV0: 0x179C0000 + // DRV2: 0x179C0000 + 0x10000 = 0x179D0000 + // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 + // TCS-OFFSET: 0xD00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + }; + + - | + // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the + // register offsets for DRV0 start at 01C00, the register calculations are + // like this:: + // DRV0: 0xAF20000 + // TCS-OFFSET: 0x1C00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@af20000 { + compatible = "qcom,rpmh-rsc"; + reg = <0xaf20000 0x10000>; + reg-names = "drv-0"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + label = "disp_rsc"; + qcom,tcs-offset = <0x1c00>; + qcom,drv-id = <0>; + qcom,tcs-config = <ACTIVE_TCS 0>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x18200000 0x10000>, + <0x18210000 0x10000>, + <0x18220000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + + clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index b32457c2fc0b..f0f1bf06aea6 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -12,7 +12,7 @@ description: | to vote for state of the system resources, such as clocks, regulators and bus frequencies. - The SMD information for the RPM edge should be filled out. See qcom,smd.txt + The SMD information for the RPM edge should be filled out. See qcom,smd.yaml for the required edge properties. All SMD related properties will reside within the RPM node itself. @@ -25,7 +25,8 @@ description: | rpm_requests. maintainers: - - Kathiravan T <kathirav@codeaurora.org> + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> properties: compatible: @@ -34,6 +35,7 @@ properties: - qcom,rpm-ipq6018 - qcom,rpm-msm8226 - qcom,rpm-msm8916 + - qcom,rpm-msm8936 - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 @@ -45,6 +47,10 @@ properties: - qcom,rpm-qcm2290 - qcom,rpm-qcs404 + clock-controller: + $ref: /schemas/clock/qcom,rpmcc.yaml# + unevaluatedProperties: false + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication @@ -82,7 +88,7 @@ examples: qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-msm8974"; qcom,smd-channels = "rpm_requests"; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt deleted file mode 100644 index 234ae2256501..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt +++ /dev/null @@ -1,98 +0,0 @@ -Qualcomm Shared Memory Driver (SMD) binding - -This binding describes the Qualcomm Shared Memory Driver, a fifo based -communication channel for sending data between the various subsystems in -Qualcomm platforms. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,smd" - -= EDGES - -Each subnode of the SMD node represents a remote subsystem or a remote -processor of some sort - or in SMD language an "edge". The name of the edges -are not important. -The edge is described by the following properties: - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the IRQ used by the remote processor to - signal this processor about communication related updates - -- mboxes: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the associated doorbell in APCS, as described - in mailbox/mailbox.txt - -- qcom,ipc: - Usage: required, unless mboxes is specified - Value type: <prop-encoded-array> - Definition: three entries specifying the outgoing ipc bit used for - signaling the remote processor: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,smd-edge: - Usage: required - Value type: <u32> - Definition: the identifier of the remote processor in the smd channel - allocation table - -- qcom,remote-pid: - Usage: optional - Value type: <u32> - Definition: the identifier for the remote processor as known by the rest - of the system. - -- label: - Usage: optional - Value type: <string> - Definition: name of the edge, used for debugging and identification - purposes. The node name will be used if this is not - present. - -= SMD DEVICES - -In turn, subnodes of the "edges" represent devices tied to SMD channels on that -"edge". The names of the devices are not important. The properties of these -nodes are defined by the individual bindings for the SMD devices - but must -contain the following property: - -- qcom,smd-channels: - Usage: required - Value type: <stringlist> - Definition: a list of channels tied to this device, used for matching - the device to channels - -= EXAMPLE - -The following example represents a smd node, with one edge representing the -"rpm" subsystem. For the "rpm" subsystem we have a device tied to the -"rpm_request" channel. - - apcs: syscon@f9011000 { - compatible = "syscon"; - reg = <0xf9011000 0x1000>; - }; - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - ... - }; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml new file mode 100644 index 000000000000..e6f9ffa1c0ea --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Driver + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Qualcomm Shared Memory Driver is a FIFO based communication channel for + sending data between the various subsystems in Qualcomm platforms. + +properties: + compatible: + const: qcom,smd + +patternProperties: + "^.*-edge|rpm$": + type: object + description: + Each subnode of the SMD node represents a remote subsystem or a remote + processor of some sort - or in SMD language an "edge". The name of the + edges are not important. + + properties: + interrupts: + maxItems: 1 + + label: + $ref: /schemas/types.yaml#/definitions/string + description: + Name of the edge, used for debugging and identification purposes. The + node name will be used if this is not present. + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote processor. + + qcom,smd-edge: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote processor in the smd channel allocation + table. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier for the remote processor as known by the rest of the + system. + + # Binding for edge subnodes is not complete + patternProperties: + "^rpm-requests$": + type: object + description: + In turn, subnodes of the "edges" represent devices tied to SMD + channels on that "edge". The names of the devices are not + important. The properties of these nodes are defined by the + individual bindings for the SMD devices. + + properties: + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 32 + description: + A list of channels tied to this device, used for matching the + device to channels. + + required: + - compatible + - qcom,smd-channels + + additionalProperties: true + + required: + - interrupts + - qcom,smd-edge + + oneOf: + - required: + - mboxes + - required: + - qcom,ipc + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + # The following example represents a smd node, with one edge representing the + # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the + # "rpm_request" channel. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt deleted file mode 100644 index 49e1d72d3648..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ /dev/null @@ -1,110 +0,0 @@ -Qualcomm Shared Memory Point 2 Point binding - -The Shared Memory Point to Point (SMP2P) protocol facilitates communication of -a single 32-bit value between two processors. Each value has a single writer -(the local side) and a single reader (the remote side). Values are uniquely -identified in the system by the directed edge (local processor ID to remote -processor ID) and a string identifier. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,smp2p" - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: one entry specifying the smp2p notification interrupt - -- mboxes: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the associated doorbell in APCS, as described - in mailbox/mailbox.txt - -- qcom,ipc: - Usage: required, unless mboxes is specified - Value type: <prop-encoded-array> - Definition: three entries specifying the outgoing ipc bit used for - signaling the remote end of the smp2p edge: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,smem: - Usage: required - Value type: <u32 array> - Definition: two identifiers of the inbound and outbound smem items used - for this edge - -- qcom,local-pid: - Usage: required - Value type: <u32> - Definition: specifies the identifier of the local endpoint of this edge - -- qcom,remote-pid: - Usage: required - Value type: <u32> - Definition: specifies the identifier of the remote endpoint of this edge - -= SUBNODES -Each SMP2P pair contain a set of inbound and outbound entries, these are -described in subnodes of the smp2p device node. The node names are not -important. - -- qcom,entry-name: - Usage: required - Value type: <string> - Definition: specifies the name of this entry, for inbound entries this - will be used to match against the remotely allocated entry - and for outbound entries this name is used for allocating - entries - -- interrupt-controller: - Usage: required for incoming entries - Value type: <empty> - Definition: marks the entry as inbound; the node should be specified - as a two cell interrupt-controller as defined in - "../interrupt-controller/interrupts.txt" - If not specified this node will denote the outgoing entry - -- #interrupt-cells: - Usage: required for incoming entries - Value type: <u32> - Definition: must be 2 - denoting the bit in the entry and IRQ flags - -- #qcom,smem-state-cells: - Usage: required for outgoing entries - Value type: <u32> - Definition: must be 1 - denoting the bit in the entry - -= EXAMPLE -The following example shows the SMP2P setup with the wireless processor, -defined from the 8974 apps processor's point-of-view. It encompasses one -inbound and one outbound entry: - -wcnss-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <431>, <451>; - - interrupts = <0 143 1>; - - qcom,ipc = <&apcs 8 18>; - - qcom,local-pid = <0>; - qcom,remote-pid = <4>; - - wcnss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - - #qcom,smem-state-cells = <1>; - }; - - wcnss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml new file mode 100644 index 000000000000..795bd8cd4104 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Point 2 Point + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory Point to Point (SMP2P) protocol facilitates communication + of a single 32-bit value between two processors. Each value has a single + writer (the local side) and a single reader (the remote side). Values are + uniquely identified in the system by the directed edge (local processor ID to + remote processor ID) and a string identifier. + +properties: + compatible: + const: qcom,smp2p + + interrupts: + maxItems: 1 + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote end of the smp2p edge. + + qcom,local-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the local endpoint of this edge. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote endpoint of this edge. + + qcom,smem: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maxItems: 2 + description: + Two identifiers of the inbound and outbound smem items used for this edge. + +patternProperties: + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$": + type: object + description: + Each SMP2P pair contain a set of inbound and outbound entries, these are + described in subnodes of the smp2p device node. The node names are not + important. + + properties: + interrupt-controller: + description: + Marks the entry as inbound; the node should be specified as a two + cell interrupt-controller. If not specified this node will denote + the outgoing entry. + + '#interrupt-cells': + const: 2 + + qcom,entry-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of this entry, for inbound entries this will be used to + match against the remotely allocated entry and for outbound entries + this name is used for allocating entries. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for outgoing entries. + + required: + - qcom,entry-name + + oneOf: + - required: + - interrupt-controller + - '#interrupt-cells' + - required: + - '#qcom,smem-state-cells' + + additionalProperties: false + +required: + - compatible + - interrupts + - qcom,local-pid + - qcom,remote-pid + - qcom,smem + +oneOf: + - required: + - mboxes + - required: + - qcom,ipc + +additionalProperties: false + +examples: + # The following example shows the SMP2P setup with the wireless processor, + # defined from the 8974 apps processor's point-of-view. It encompasses one + # inbound and one outbound entry. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smp2p"; + qcom,smem = <431>, <451>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt deleted file mode 100644 index 2993b5a97dd6..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm Shared Memory State Machine - -The Shared Memory State Machine facilitates broadcasting of single bit state -information between the processors in a Qualcomm SoC. Each processor is -assigned 32 bits of state that can be modified. A processor can through a -matrix of bitmaps signal subscription of notifications upon changes to a -certain bit owned by a certain remote processor. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,smsm" - -- qcom,ipc-N: - Usage: required - Value type: <prop-encoded-array> - Definition: three entries specifying the outgoing ipc bit used for - signaling the N:th remote processor - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,local-host: - Usage: optional - Value type: <u32> - Definition: identifier of the local processor in the list of hosts, or - in other words specifier of the column in the subscription - matrix representing the local processor - defaults to host 0 - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -= SUBNODES -Each processor's state bits are described by a subnode of the smsm device node. -Nodes can either be flagged as an interrupt-controller to denote a remote -processor's state bits or the local processors bits. The node names are not -important. - -- reg: - Usage: required - Value type: <u32> - Definition: specifies the offset, in words, of the first bit for this - entry - -- #qcom,smem-state-cells: - Usage: required for local entry - Value type: <u32> - Definition: must be 1 - denotes bit number - -- interrupt-controller: - Usage: required for remote entries - Value type: <empty> - Definition: marks the entry as a interrupt-controller and the state bits - to belong to a remote processor - -- #interrupt-cells: - Usage: required for remote entries - Value type: <u32> - Definition: must be 2 - denotes bit number and IRQ flags - -- interrupts: - Usage: required for remote entries - Value type: <prop-encoded-array> - Definition: one entry specifying remote IRQ used by the remote processor - to signal changes of its state bits - - -= EXAMPLE -The following example shows the SMEM setup for controlling properties of the -wireless processor, defined from the 8974 apps processor's point-of-view. It -encompasses one outbound entry and the outgoing interrupt for the wireless -processor. - -smsm { - compatible = "qcom,smsm"; - - #address-cells = <1>; - #size-cells = <0>; - - qcom,ipc-3 = <&apcs 8 19>; - - apps_smsm: apps@0 { - reg = <0>; - - #qcom,smem-state-cells = <1>; - }; - - wcnss_smsm: wcnss@7 { - reg = <7>; - interrupts = <0 144 1>; - - interrupt-controller; - #interrupt-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml new file mode 100644 index 000000000000..db67cf043256 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory State Machine + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory State Machine facilitates broadcasting of single bit state + information between the processors in a Qualcomm SoC. Each processor is + assigned 32 bits of state that can be modified. A processor can through a + matrix of bitmaps signal subscription of notifications upon changes to a + certain bit owned by a certain remote processor. + +properties: + compatible: + const: qcom,smsm + + '#address-cells': + const: 1 + + qcom,local-host: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Identifier of the local processor in the list of hosts, or in other words + specifier of the column in the subscription matrix representing the local + processor. + + '#size-cells': + const: 0 + +patternProperties: + "^qcom,ipc-[1-4]$": + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the N:th + remote processor. + + "@[0-9a-f]$": + type: object + description: + Each processor's state bits are described by a subnode of the SMSM device + node. Nodes can either be flagged as an interrupt-controller to denote a + remote processor's state bits or the local processors bits. The node + names are not important. + + properties: + reg: + maxItems: 1 + + interrupt-controller: + description: + Marks the entry as a interrupt-controller and the state bits to + belong to a remote processor. + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + description: + One entry specifying remote IRQ used by the remote processor to + signal changes of its state bits. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for local entry. Denotes bit number. + + required: + - reg + + oneOf: + - required: + - '#qcom,smem-state-cells' + - required: + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + +anyOf: + - required: + - qcom,ipc-1 + - required: + - qcom,ipc-2 + - required: + - qcom,ipc-3 + - required: + - qcom,ipc-4 + +additionalProperties: false + +examples: + # The following example shows the SMEM setup for controlling properties of + # the wireless processor, defined from the 8974 apps processor's + # point-of-view. It encompasses one outbound entry and the outgoing interrupt + # for the wireless processor. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smsm"; + #address-cells = <1>; + #size-cells = <0>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt deleted file mode 100644 index 1382b64e1381..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ /dev/null @@ -1,131 +0,0 @@ -Qualcomm WCNSS Binding - -This binding describes the Qualcomm WCNSS hardware. It consists of control -block and a BT, WiFi and FM radio block, all using SMD as command channels. - -- compatible: - Usage: required - Value type: <string> - Definition: must be: "qcom,wcnss", - -- qcom,smd-channel: - Usage: required - Value type: <string> - Definition: standard SMD property specifying the SMD channel used for - communication with the WiFi firmware. - Should be "WCNSS_CTRL". - -- qcom,mmio: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to a node specifying the wcnss "ccu" and "dxe" - register blocks. The node must be compatible with one of - the following: - "qcom,riva", - "qcom,pronto" - -- firmware-name: - Usage: optional - Value type: <string> - Definition: specifies the relative firmware image path for the WLAN NV - blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if - not specified. - -= SUBNODES -The subnodes of the wcnss node are optional and describe the individual blocks in -the WCNSS. - -== Bluetooth -The following properties are defined to the bluetooth node: - -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,wcnss-bt" - -- local-bd-address: - Usage: optional - Value type: <u8 array> - Definition: see Documentation/devicetree/bindings/net/bluetooth.txt - -== WiFi -The following properties are defined to the WiFi node: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,wcnss-wlan", - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the "rx" and "tx" interrupts - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: must contain "rx" and "tx" - -- qcom,smem-state: - Usage: required - Value type: <prop-encoded-array> - Definition: should reference the tx-enable and tx-rings-empty SMEM states - -- qcom,smem-state-names: - Usage: required - Value type: <stringlist> - Definition: must contain "tx-enable" and "tx-rings-empty" - -= EXAMPLE -The following example represents a SMD node, with one edge representing the -"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks -described; as found on the 8974 platform. - -smd { - compatible = "qcom,smd"; - - pronto-edge { - interrupts = <0 142 1>; - - qcom,ipc = <&apcs 8 17>; - qcom,smd-edge = <6>; - - wcnss { - compatible = "qcom,wcnss"; - qcom,smd-channels = "WCNSS_CTRL"; - - #address-cells = <1>; - #size-cells = <1>; - - qcom,mmio = <&pronto>; - - bt { - compatible = "qcom,wcnss-bt"; - - /* BD address 00:11:22:33:44:55 */ - local-bd-address = [ 55 44 33 22 11 00 ]; - }; - - wlan { - compatible = "qcom,wcnss-wlan"; - - interrupts = <0 145 0>, <0 146 0>; - interrupt-names = "tx", "rx"; - - qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; - }; - }; - }; -}; - -soc { - pronto: pronto { - compatible = "qcom,pronto"; - - reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; - reg-names = "ccu", "dxe", "pmu"; - }; -}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml new file mode 100644 index 000000000000..d891ecfb2691 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCNSS + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM + radio block, all using SMD as command channels. + +properties: + compatible: + const: qcom,wcnss + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + default: "wlan/prima/WCNSS_qcom_wlan_nv.bin" + description: + Relative firmware image path for the WLAN NV blob. + + qcom,mmio: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to a node specifying the wcnss "ccu" and "dxe" register blocks. + The node must be compatible with one of the following:: + - qcom,riva" + - qcom,pronto" + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string + const: WCNSS_CTRL + description: + Standard SMD property specifying the SMD channel used for communication + with the WiFi firmware. + + bluetooth: + type: object + additionalProperties: false + properties: + compatible: + const: qcom,wcnss-bt + + local-bd-address: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 6 + description: + See Documentation/devicetree/bindings/net/bluetooth.txt + + required: + - compatible + + wifi: + additionalProperties: false + type: object + properties: + compatible: + const: qcom,wcnss-wlan + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: tx + - const: rx + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: + Should reference the tx-enable and tx-rings-empty SMEM states. + + qcom,smem-state-names: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: tx-enable + - const: tx-rings-empty + description: + Names of SMEM states. + + required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + +required: + - compatible + - qcom,mmio + - qcom,smd-channels + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt deleted file mode 100644 index 9b86d1eff219..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt +++ /dev/null @@ -1,137 +0,0 @@ -RPMH RSC: ------------- - -Resource Power Manager Hardened (RPMH) is the mechanism for communicating with -the hardened resource accelerators on Qualcomm SoCs. Requests to the resources -can be written to the Trigger Command Set (TCS) registers and using a (addr, -val) pair and triggered. Messages in the TCS are then sent in sequence over an -internal bus. - -The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity -(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and -active/wake resource requests. Multiple such DRVs can exist in a SoC and can -be written to from Linux. The structure of each DRV follows the same template -with a few variations that are captured by the properties here. - -A TCS may be triggered from Linux or triggered by the F/W after all the CPUs -have powered off to facilitate idle power saving. TCS could be classified as - - - ACTIVE /* Triggered by Linux */ - SLEEP /* Triggered by F/W */ - WAKE /* Triggered by F/W */ - CONTROL /* Triggered by F/W */ - -The order in which they are described in the DT, should match the hardware -configuration. - -Requests can be made for the state of a resource, when the subsystem is active -or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state -will be an aggregate of the sleep votes from each of those subsystems. Clients -may request a sleep value for their shared resources in addition to the active -mode requests. - -Properties: - -- compatible: - Usage: required - Value type: <string> - Definition: Should be "qcom,rpmh-rsc". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: The first register specifies the base address of the - DRV(s). The number of DRVs in the dependent on the RSC. - The tcs-offset specifies the start address of the - TCS in the DRVs. - -- reg-names: - Usage: required - Value type: <string> - Definition: Maps the register specified in the reg property. Must be - "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The - -- interrupts: - Usage: required - Value type: <prop-encoded-interrupt> - Definition: The interrupt that trips when a message complete/response - is received for this DRV from the accelerators. - -- qcom,drv-id: - Usage: required - Value type: <u32> - Definition: The id of the DRV in the RSC block that will be used by - this controller. - -- qcom,tcs-config: - Usage: required - Value type: <prop-encoded-array> - Definition: The tuple defining the configuration of TCS. - Must have 2 cells which describe each TCS type. - <type number_of_tcs>. - The order of the TCS must match the hardware - configuration. - - Cell #1 (TCS Type): TCS types to be specified - - ACTIVE_TCS - SLEEP_TCS - WAKE_TCS - CONTROL_TCS - - Cell #2 (Number of TCS): <u32> - -- label: - Usage: optional - Value type: <string> - Definition: Name for the RSC. The name would be used in trace logs. - -Drivers that want to use the RSC to communicate with RPMH must specify their -bindings as child nodes of the RSC controllers they wish to communicate with. - -Example 1: - -For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the -register offsets for DRV2 start at 0D00, the register calculations are like -this - -DRV0: 0x179C0000 -DRV2: 0x179C0000 + 0x10000 = 0x179D0000 -DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 -TCS-OFFSET: 0xD00 - - apps_rsc: rsc@179c0000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0x179c0000 0x10000>, - <0x179d0000 0x10000>, - <0x179e0000 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = <ACTIVE_TCS 2>, - <SLEEP_TCS 3>, - <WAKE_TCS 3>, - <CONTROL_TCS 1>; - }; - -Example 2: - -For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the -register offsets for DRV0 start at 01C00, the register calculations are like -this - -DRV0: 0xAF20000 -TCS-OFFSET: 0x1C00 - - disp_rsc: rsc@af20000 { - label = "disp_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0xaf20000 0x10000>; - reg-names = "drv-0"; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; - qcom,tcs-offset = <0x1c00>; - qcom,drv-id = <0>; - qcom,tcs-config = <ACTIVE_TCS 0>, - <SLEEP_TCS 1>, - <WAKE_TCS 1>, - <CONTROL_TCS 0>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml index bb433e75a0ee..ce2875c89329 100644 --- a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" +$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Renesas RZ/{G2L,V2L} System Controller (SYSC) @@ -10,8 +10,8 @@ maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> description: - The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI - and supports following functions, + The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of + the LSI and supports following functions, - External terminal state capture function - 34-bit address space access function - Low power consumption control @@ -20,6 +20,7 @@ description: properties: compatible: enum: + - renesas,r9a07g043-sysc # RZ/G2UL - renesas,r9a07g044-sysc # RZ/G2{L,LC} - renesas,r9a07g054-sysc # RZ/V2L diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index b2ba7bed89b2..75a2b8bb25fb 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,6 +15,9 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3566-pipe-grf + - rockchip,rk3568-pipe-grf + - rockchip,rk3568-pipe-phy-grf - rockchip,rk3568-usb2phy-grf - rockchip,rv1108-usbgrf - const: syscon diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index 0cabb773c397..fde886a8cf43 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -77,7 +77,7 @@ patternProperties: description: Child node describing underlying UART/serial "^spi@[0-9a-f]+$": - type: object + $ref: /schemas/spi/samsung,spi.yaml description: Child node describing underlying SPI required: diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml new file mode 100644 index 000000000000..0df41c4f60c1 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wakeup M3 IPC device + +maintainers: + - Dave Gerlach <d-gerlach@ti.com> + - Drew Fustini <dfustini@baylibre.com> + +description: |+ + The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor + (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks + that cannot be controlled from the MPU, like suspend/resume and certain deep + C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver + to boot the wkup_m3, it handles communication with the CM3 using IPC registers + present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an + API to allow the SoC PM code to execute specific PM tasks. + + Wkup M3 Device Node + ==================== + A wkup_m3_ipc device node is used to represent the IPC registers within an + SoC. + + Support for VTT Toggle with GPIO pin + ==================================== + On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is + connected to the enable pin on the DDR VTT regulator. This allows the + regulator to be disabled upon suspend and enabled upon resume. Please note + that the GPIO pin must be part of the GPIO0 module as only this GPIO module + is in the wakeup power domain. + + Support for IO Isolation + ======================== + On AM437x SoCs, certain pins can be forced into an alternate state when IO + isolation is activated. Those pins have pad control registers prefixed by + 'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can + override the pin's existing bias (pull-up/pull-down) and value (high/low) when + IO isolation is active. + + Support for I2C PMIC Voltage Scaling + ==================================== + It is possible to pass the name of a binary file to load into the CM3 memory. + The binary data is the I2C sequences for the CM3 to send out to the PMIC + during low power mode entry. + +properties: + compatible: + enum: + - ti,am3352-wkup-m3-ipc # for AM33xx SoCs + - ti,am4372-wkup-m3-ipc # for AM43xx SoCs + + reg: + description: + The IPC register address space to communicate with the Wakeup M3 processor + maxItems: 1 + + interrupts: + description: wkup_m3 interrupt that signals the MPU + maxItems: 1 + + ti,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the wkup_m3 rproc node so the IPC driver can boot it + + mboxes: + description: + phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + maxItems: 1 + + firmware-name: + description: + Name of binary file with I2C sequences for PMIC voltage scaling + + ti,vtt-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: GPIO pin connected to enable pin on VTT regulator + + ti,set-io-isolation: + type: boolean + description: + If this property is present, then the wkup_m3_ipc driver will instruct + the CM3 firmware to activate IO isolation when suspending to deep sleep. + This can be leveraged by a board design to put other devices on the board + into a low power state. + +allOf: + - if: + properties: + compatible: + not: + contains: + const: ti,am4372-wkup-m3-ipc + then: + properties: + ti,set-io-isolation: false + +required: + - compatible + - reg + - interrupts + - ti,rproc + - mboxes + +additionalProperties: false + +examples: + - | + /* Example for AM335x SoC */ + soc { + #address-cells = <1>; + #size-cells = <1>; + + am335x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; + }; + }; + + - | + /* + * Example for AM473x SoC: + * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT + * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7 + * for pull-up during normal system operation. However, the DS0 (deep sleep) + * state of the pin is configured for pull-down and thus the VTT regulator + * will be disabled to save power when IO isolation is active. Note that + * this method is an alternative to using the 'ti,vtt-gpio-pin' property. + */ + #include <dt-bindings/pinctrl/am43xx.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + + am437x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&ddr3_vtt_toggle_default>; + + ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + pinctrl-single,pins = < + 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) + >; + }; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt deleted file mode 100644 index 401550487ed6..000000000000 --- a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt +++ /dev/null @@ -1,57 +0,0 @@ -Wakeup M3 IPC Driver -===================== - -The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor -(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks -that cannot be controlled from the MPU, like suspend/resume and certain deep -C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver -to boot the wkup_m3, it handles communication with the CM3 using IPC registers -present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an -API to allow the SoC PM code to execute specific PM tasks. - -Wkup M3 Device Node: -==================== -A wkup_m3_ipc device node is used to represent the IPC registers within an -SoC. - -Required properties: --------------------- -- compatible: Should be, - "ti,am3352-wkup-m3-ipc" for AM33xx SoCs - "ti,am4372-wkup-m3-ipc" for AM43xx SoCs -- reg: Contains the IPC register address space to communicate - with the Wakeup M3 processor -- interrupts: Contains the interrupt information for the wkup_m3 - interrupt that signals the MPU. -- ti,rproc: phandle to the wkup_m3 rproc node so the IPC driver - can boot it. -- mboxes: phandles used by IPC framework to get correct mbox - channel for communication. Must point to appropriate - mbox_wkupm3 child node. - -Example: --------- -/* AM33xx */ - l4_wkup: l4_wkup@44c00000 { - ... - - scm: scm@210000 { - compatible = "ti,am3-scm", "simple-bus"; - reg = <0x210000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x210000 0x2000>; - - ... - - wkup_m3_ipc: wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&mailbox &mbox_wkupm3>; - }; - - ... - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml index 701449311fec..59f7c60a14ba 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -64,4 +64,3 @@ examples: clock-frequency = <12288000>; }; ... - diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml new file mode 100644 index 000000000000..ec4c10c2598a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98396.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98396 Speaker Amplifier Device Tree Bindings + +maintainers: + - Ryan Lee <ryans.lee@analog.com> + +description: + The MAX98396 is a mono Class-DG speaker amplifier with I/V sense. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + The MAX98397 is a variant of MAX98396 with wide input supply range. + +properties: + compatible: + enum: + - adi,max98396 + - adi,max98397 + reg: + maxItems: 1 + description: I2C address of the device. + + adi,vmon-slot-no: + description: slot number of the voltage sense monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current sense monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,spkfb-slot-no: + description: slot number of speaker DSP monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,interleave-mode: + description: + For cases where a single combined channel for the I/V sense data + is not sufficient, the device can also be configured to share + a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame + interleaved on a single output channel. + type: boolean + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98396: amplifier@39 { + compatible = "adi,max98396"; + reg = <0x39>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index 8b5be4b92f35..b4b35edcb493 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -112,4 +112,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/sound/arm,pl041.yaml b/Documentation/devicetree/bindings/sound/arm,pl041.yaml new file mode 100644 index 000000000000..7896b8150cf0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/arm,pl041.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/arm,pl041.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd. PrimeCell PL041 AACI sound interface + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant + peripheral that provides communication with an audio CODEC using the AC-link + protocol. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl041 + required: + - compatible + +properties: + compatible: + items: + - const: arm,pl041 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: APB register access clock + + clock-names: + const: apb_pclk + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + audio-controller@40000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index f7e94b1e0e4b..7416067c945e 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -24,10 +24,13 @@ properties: connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array multi: + type: object description: Multi-CPU/Codec node dpcm: + type: object description: DPCM node codec2codec: + type: object description: Codec to Codec node required: diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml index 3235702ce402..51d815d0c696 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml @@ -75,6 +75,19 @@ properties: maximum: 3 default: 2 + cirrus,boost-type: + description: + Configures the type of Boost being used. + Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and + boost-cap-microfarad. + External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to + enable boost voltage. + 0 = Internal Boost + 1 = External Boost + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + cirrus,gpio1-polarity-invert: description: Boolean which specifies whether the GPIO1 @@ -131,9 +144,32 @@ required: - compatible - reg - "#sound-dai-cells" - - cirrus,boost-peak-milliamp - - cirrus,boost-ind-nanohenry - - cirrus,boost-cap-microfarad + +allOf: + - if: + properties: + cirrus,boost-type: + const: 0 + then: + required: + - cirrus,boost-peak-milliamp + - cirrus,boost-ind-nanohenry + - cirrus,boost-cap-microfarad + else: + if: + properties: + cirrus,boost-type: + const: 1 + then: + required: + - cirrus,gpio1-output-enable + - cirrus,gpio1-src-select + properties: + cirrus,boost-peak-milliamp: false + cirrus,boost-ind-nanohenry: false + cirrus,boost-cap-microfarad: false + cirrus,gpio1-src-select: + enum: [1] additionalProperties: false @@ -150,6 +186,8 @@ examples: VA-supply = <&dummy_vreg>; VP-supply = <&dummy_vreg>; reset-gpios = <&gpio 110 0>; + + cirrus,boost-type = <0>; cirrus,boost-peak-milliamp = <4500>; cirrus,boost-ind-nanohenry = <1000>; cirrus,boost-cap-microfarad = <15>; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml new file mode 100644 index 000000000000..184a1344ea76 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS35L45 Speaker Amplifier + +maintainers: + - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com> + - Richard Fitzgerald <rf@opensource.cirrus.com> + +description: | + CS35L45 is a Boosted Mono Class D Amplifier with DSP + Speaker Protection and Adaptive Battery Management. + +properties: + compatible: + enum: + - cirrus,cs35l45 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + reset-gpios: + maxItems: 1 + + vdd-a-supply: + description: voltage regulator phandle for the VDD_A supply + + vdd-batt-supply: + description: voltage regulator phandle for the VDD_BATT supply + + spi-max-frequency: + maximum: 5000000 + + cirrus,asp-sdout-hiz-ctrl: + description: + Audio serial port SDOUT Hi-Z control. Sets the Hi-Z + configuration for SDOUT pin of amplifier. Logical OR of + CS35L45_ASP_TX_HIZ_xxx values. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3 + default: 2 + +required: + - compatible + - reg + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/cs35l45.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs35l45: cs35l45@2 { + #sound-dai-cells = <1>; + compatible = "cirrus,cs35l45"; + reg = <2>; + spi-max-frequency = <5000000>; + vdd-a-supply = <&dummy_vreg>; + vdd-batt-supply = <&dummy_vreg>; + reset-gpios = <&gpio 110 0>; + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | + CS35L45_ASP_TX_HIZ_DISABLED)>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.txt b/Documentation/devicetree/bindings/sound/fsl,micfil.txt index 53e227b15277..1ea05d4996c7 100644 --- a/Documentation/devicetree/bindings/sound/fsl,micfil.txt +++ b/Documentation/devicetree/bindings/sound/fsl,micfil.txt @@ -6,6 +6,7 @@ microphone bitstream in a configurable output sampling rate. Required properties: - compatible : Compatible list, contains "fsl,imx8mm-micfil" + or "fsl,imx8mp-micfil" - reg : Offset and length of the register set for the device. diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml index d5474f83ac2c..e7e7bb65c366 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml +++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml @@ -20,9 +20,11 @@ properties: description: User specified audio sound card name audio-cpu: + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of an CPU DAI controller hdmi-out: + type: boolean description: | This is a boolean property. If present, the transmitting function of HDMI will be enabled, indicating there's a physical HDMI out @@ -30,6 +32,7 @@ properties: block, such as an HDMI encoder or display-controller. hdmi-in: + type: boolean description: | This is a boolean property. If present, the receiving function of HDMI will be enabled, indicating there is a physical HDMI in diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml index fea9a1b6619a..deaa6886c42f 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml @@ -29,6 +29,9 @@ properties: minimum: 1 maximum: 8388607 + reset-gpios: + maxItems: 1 + required: - compatible - reg @@ -37,6 +40,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -45,5 +49,6 @@ examples: reg = <0x38>; maxim,temperature_calib = <1024>; maxim,r0_calib = <100232>; + reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml index b6509cb2c8e0..3f88c7d61e34 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml @@ -33,4 +33,3 @@ examples: reg = <0x38>; }; }; - diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml index 4a2129005c0f..970311143253 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml @@ -10,7 +10,7 @@ maintainers: - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> description: - The Microchip Sony/Philips Digital Interface Receiver is a serial port + The Microchip Sony/Philips Digital Interface Receiver is a serial port compliant with the IEC-60958 standard. properties: diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml index bdfb63387c53..d5c022e49526 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml @@ -10,7 +10,7 @@ maintainers: - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> description: - The Microchip Sony/Philips Digital Interface Transmitter is a serial port + The Microchip Sony/Philips Digital Interface Transmitter is a serial port compliant with the IEC-60958 standard. properties: diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index 5a5b765b859a..4fa179909c62 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -18,6 +18,7 @@ properties: enum: - mediatek,mt8192_mt6359_rt1015_rt5682 - mediatek,mt8192_mt6359_rt1015p_rt5682 + - mediatek,mt8192_mt6359_rt1015p_rt5682s mediatek,platform: $ref: "/schemas/types.yaml#/definitions/phandle" @@ -27,11 +28,33 @@ properties: $ref: "/schemas/types.yaml#/definitions/phandle" description: The phandle of HDMI codec. + headset-codec: + type: object + properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle + required: + - sound-dai + + speaker-codecs: + type: object + properties: + sound-dai: + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle-array + required: + - sound-dai + additionalProperties: false required: - compatible - mediatek,platform + - headset-codec + - speaker-codecs examples: - | @@ -44,6 +67,15 @@ examples: "aud_clk_mosi_on"; pinctrl-0 = <&aud_clk_mosi_off>; pinctrl-1 = <&aud_clk_mosi_on>; + + headset-codec { + sound-dai = <&rt5682>; + }; + + speaker-codecs { + sound-dai = <&rt1015_l>, + <&rt1015_r>; + }; }; ... diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml deleted file mode 100644 index cf6ad7933e23..000000000000 --- a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml +++ /dev/null @@ -1,51 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1011-rt5682.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT8195 with MT6359, RT1011 and RT5682 ASoC sound card driver - -maintainers: - - Trevor Wu <trevor.wu@mediatek.com> - -description: - This binding describes the MT8195 sound card with RT1011 and RT5682. - -properties: - compatible: - const: mediatek,mt8195_mt6359_rt1011_rt5682 - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - - mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 ASoC platform. - - mediatek,dptx-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 Display Port Tx codec node. - - mediatek,hdmi-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" - description: The phandle of MT8195 HDMI codec node. - -additionalProperties: false - -required: - - compatible - - mediatek,platform - -examples: - - | - - sound: mt8195-sound { - compatible = "mediatek,mt8195_mt6359_rt1011_rt5682"; - mediatek,platform = <&afe>; - pinctrl-names = "default"; - pinctrl-0 = <&aud_pins_default>; - }; - -... diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml index 8f177e02ad35..ad3447ff8b2c 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1019-rt5682.yaml# +$id: http://devicetree.org/schemas/sound/mt8195-mt6359.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT8195 with MT6359, RT1019 and RT5682 ASoC sound card driver +title: MediaTek MT8195 ASoC sound card driver maintainers: - Trevor Wu <trevor.wu@mediatek.com> @@ -14,7 +14,10 @@ description: properties: compatible: - const: mediatek,mt8195_mt6359_rt1019_rt5682 + enum: + - mediatek,mt8195_mt6359_rt1019_rt5682 + - mediatek,mt8195_mt6359_rt1011_rt5682 + - mediatek,mt8195_mt6359_max98390_rt5682 model: $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml index e768fb0e9a59..b1deaf271afa 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml @@ -82,4 +82,3 @@ examples: clocks = <&clk 216>, <&clk 217>, <&clk 120>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; - diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml new file mode 100644 index 000000000000..520d0d063d1a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra186 ASRC Device Tree Bindings + +description: | + Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency + of the input signal from one frequency to another. It can handle over a + wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1. + ASRC has two modes of operation. One where ratio can be programmed in SW + and the other where it gets the information from ratio estimator module. + + It supports sample rate conversions in the range of 8 to 192 kHz and + supports 6 streams upto 12 total channels. The input data size can be + 16, 24 and 32 bits. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Mohan Kumar <mkumard@nvidia.com> + - Sameer Pujar <spujar@nvidia.com> + +allOf: + - $ref: name-prefix.yaml# + +properties: + $nodename: + pattern: "^asrc@[0-9a-f]*$" + + compatible: + oneOf: + - const: nvidia,tegra186-asrc + - items: + - enum: + - nvidia,tegra234-asrc + - nvidia,tegra194-asrc + - const: nvidia,tegra186-asrc + + reg: + maxItems: 1 + + sound-name-prefix: + pattern: "^ASRC[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + ASRC has seven input ports and six output ports. Accordingly ACIF + (Audio Client Interfaces) port nodes are defined to represent the + ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are + connected to corresponding ports on AHUB (Audio Hub). Additional + input (port 6) is for receiving ratio information from estimator. + + patternProperties: + '^port@[0-6]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: ASRC ACIF input ports + '^port@[7-9]|1[1-2]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: ASRC ACIF output ports + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + asrc@2910000 { + compatible = "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 4727f1e42c53..6df6f858038c 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -106,6 +106,10 @@ patternProperties: type: object $ref: nvidia,tegra210-mixer.yaml# + '^asrc@[0-9a-f]+$': + type: object + $ref: nvidia,tegra186-asrc.yaml# + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index 2c81efb5fa37..e9a533080b32 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -38,8 +38,8 @@ properties: maxItems: 7 clock-names: - minItems: 3 - maxItems: 7 + minItems: 1 + maxItems: 10 interrupts: minItems: 2 @@ -62,6 +62,9 @@ properties: power-domains: maxItems: 1 + power-domain-names: + maxItems: 1 + '#sound-dai-cells': const: 1 @@ -192,15 +195,19 @@ allOf: oneOf: - items: #for I2S - const: aon_cc_audio_hm_h + - const: audio_cc_ext_mclk0 - const: core_cc_sysnoc_mport_core + - const: core_cc_ext_if0_ibit - const: core_cc_ext_if1_ibit - items: #for Soundwire - const: aon_cc_audio_hm_h + - const: audio_cc_codec_mem - const: audio_cc_codec_mem0 - const: audio_cc_codec_mem1 - const: audio_cc_codec_mem2 + - const: aon_cc_va_mem0 - items: #for HDMI - - const: aon_cc_audio_hm_h + - const: core_cc_sysnoc_mport_core reg-names: anyOf: @@ -228,6 +235,10 @@ allOf: - const: lpass-irq-hdmi - const: lpass-irq-vaif - const: lpass-irq-rxtxif + power-domain-names: + allOf: + - items: + - const: lcx required: - iommus diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 6127df5836c2..a6905bcf89d2 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -28,12 +28,17 @@ properties: maxItems: 5 clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + - items: #for ADSP bypass based platforms + - const: mclk + - const: npl + - const: fsgen clock-output-names: items: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 3f0f99cb18ca..324595a62ae8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -28,12 +28,17 @@ properties: maxItems: 5 clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + - items: #for ADSP bypass based platforms + - const: mclk + - const: npl + - const: fsgen clock-output-names: items: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 9868a5ebe27e..7b4cc84eda8c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -28,10 +28,13 @@ properties: maxItems: 3 clock-names: - items: - - const: mclk - - const: core - - const: dcodec + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: core + - const: dcodec + - items: #for ADSP bypass based platforms + - const: mclk clock-output-names: items: diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml index 7bf1a5fffcd2..51547190f709 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -36,6 +36,9 @@ properties: vdd-io-supply: description: A reference to the 1.8V I/O supply + vdd-mic-bias-supply: + description: A reference to the 3.8V mic bias supply + qcom,tx-device: $ref: /schemas/types.yaml#/definitions/phandle-array description: A reference to Soundwire tx device phandle diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index fdb7f295ef2d..1d73204451b1 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -25,6 +25,9 @@ properties: 0 means shut down; 1 means power on. maxItems: 1 + "#sound-dai-cells": + const: 0 + required: - compatible diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index cd8c53d8497e..c5f2b8febcee 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -46,6 +46,8 @@ Optional properties: - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out. +- #sound-dai-cells: Should be set to '<0>'. + Pins on the device (for linking into audio routes) for RT5682: * DMIC L1 diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index 97f83eeaf091..a01c4ad929b8 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -149,4 +149,3 @@ examples: sound-dai = <&wm8994>; }; }; - diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index db2513f3e168..7b4e08ddef6a 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -92,4 +92,3 @@ examples: sound-dai = <&hdmi>, <&max98090>; }; }; - diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml new file mode 100644 index 000000000000..4afc29376efc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/serial-midi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Serial MIDI Interface + +maintainers: + - Daniel Kaehn <kaehndan@gmail.com> + +description: + Generic MIDI interface using a serial device. This denotes that a serial device is + dedicated to MIDI communication, either to an external MIDI device through a DIN5 + or other connector, or to a known hardwired MIDI controller. This device must be a + child node of a serial node. + + Can only be set to use standard baud rates corresponding to supported rates of the + parent serial device. If the standard MIDI baud of 31.25 kBaud is needed + (as would be the case if interfacing with arbitrary external MIDI devices), + configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud + resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) + +properties: + compatible: + const: serial-midi + + current-speed: + description: Baudrate to set the serial port to when this MIDI device is opened. + default: 38400 + +required: + - compatible + +additionalProperties: false + +examples: + - | + serial { + midi { + compatible = "serial-midi"; + }; + }; + - | + serial { + midi { + compatible = "serial-midi"; + current-speed = <115200>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index acd4bbe69731..5f7dd5d6cbca 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -76,4 +76,3 @@ examples: ti,imon-slot-no = <0>; }; }; - diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 027bebf4e8cf..bc90e72bf7cf 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -80,4 +80,3 @@ examples: ti,vmon-slot-no = <2>; }; }; - diff --git a/Documentation/devicetree/bindings/sound/tas2764.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 5bf8c76ecda1..66a0df8850ea 100644 --- a/Documentation/devicetree/bindings/sound/tas2764.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -1,25 +1,26 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -# Copyright (C) 2020 Texas Instruments Incorporated +# Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2764.yaml#" +$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Texas Instruments TAS2764 Smart PA +title: Texas Instruments TAS2764/TAS2780 Smart PA maintainers: - - Dan Murphy <dmurphy@ti.com> + - Shenghao Ding <shenghao-ding@ti.com> description: | - The TAS2764 is a mono, digital input Class-D audio amplifier optimized for - efficiently driving high peak power into small loudspeakers. - Integrated speaker voltage and current sense provides for - real time monitoring of loudspeaker behavior. + The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated speaker voltage and current sense provides + for real time monitoring of loudspeaker behavior. properties: compatible: enum: - ti,tas2764 + - ti,tas2780 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml new file mode 100644 index 000000000000..e7220e8b49f0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson Microelectromics WM8731 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: | + Wolfson Microelectronics WM8731 audio CODEC + + Pins on the device (for linking into audio routes): + * LOUT: Left Channel Line Output + * ROUT: Right Channel Line Output + * LHPOUT: Left Channel Headphone Output + * RHPOUT: Right Channel Headphone Output + * LLINEIN: Left Channel Line Input + * RLINEIN: Right Channel Line Input + * MICIN: Microphone Input + +properties: + compatible: + enum: + - wlf,wm8731 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + description: Clock provider for MCLK pin. + maxItems: 1 + + clock-names: + items: + - const: mclk + + AVDD-supply: + description: Analog power supply regulator on the AVDD pin. + + HPVDD-supply: + description: Headphone power supply regulator on the HPVDD pin. + + DBVDD-supply: + description: Digital buffer supply regulator for the DBVDD pin. + + DCVDD-supply: + description: Digital core supply regulator for the DCVDD pin. + + spi-max-frequency: true + +additionalProperties: false + +required: + - reg + - compatible + - AVDD-supply + - HPVDD-supply + - DBVDD-supply + - DCVDD-supply + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + wm8731_i2c: codec@0 { + compatible = "wlf,wm8731"; + reg = <0>; + spi-max-frequency = <12500000>; + + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + }; + }; + - | + + i2c { + #address-cells = <1>; + #size-cells = <0>; + wm8731_spi: codec@1b { + compatible = "wlf,wm8731"; + reg = <0x1b>; + + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml new file mode 100644 index 000000000000..8aadcbeed502 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8940.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8940 Codec Device Tree Bindings + +maintainers: + - patches@opensource.cirrus.com + +properties: + '#sound-dai-cells': + const: 0 + + compatible: + const: wlf,wm8940 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 526000 + +required: + - '#sound-dai-cells' + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + codec@0 { + #sound-dai-cells = <0>; + compatible = "wlf,wm8940"; + reg = <0>; + spi-max-frequency = <500000>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8940"; + reg = <0x1a>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt deleted file mode 100644 index f660d9bb0e69..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8731.txt +++ /dev/null @@ -1,27 +0,0 @@ -WM8731 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8731" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8731: codec@1a { - compatible = "wlf,wm8731"; - reg = <0x1a>; -}; - -Available audio endpoints for an audio-routing table: - * LOUT: Left Channel Line Output - * ROUT: Right Channel Line Output - * LHPOUT: Left Channel Headphone Output - * RHPOUT: Right Channel Headphone Output - * LLINEIN: Left Channel Line Input - * RLINEIN: Right Channel Line Input - * MICIN: Microphone Input diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 908248260afa..ca4c95345a49 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -26,6 +26,7 @@ properties: - allwinner,sun8i-r40-spi - allwinner,sun50i-h6-spi - allwinner,sun50i-h616-spi + - allwinner,suniv-f1c100s-spi - const: allwinner,sun8i-h3-spi reg: diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 4d46c49ec32b..50de0da42c13 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -95,4 +95,3 @@ examples: reg = <0>; }; }; - diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml index 54b6f15eca18..8a9d526d06eb 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -52,4 +52,3 @@ examples: spi-max-frequency = <40000000>; }; }; - diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt deleted file mode 100644 index c8c1e913f4e7..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt +++ /dev/null @@ -1,39 +0,0 @@ -GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP v3 core is a GENI based AHB slave that provides a common data path -(an output FIFO and an input FIFO) for serial peripheral interface (SPI) -mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Must contain "qcom,geni-spi". -- reg: Must contain SPI register location and length. -- interrupts: Must contain SPI controller interrupts. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. -- #address-cells: Must be <1> to define a chip select address on - the SPI bus. -- #size-cells: Must be <0>. - -SPI Controller nodes must be child of GENI based Qualcomm Universal -Peripharal. Please refer GENI based QUP wrapper controller node bindings -described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. - -SPI slave nodes must be children of the SPI master node and conform to SPI bus -binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt. - -Example: - spi0: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_spi_2_active>; - pinctrl-1 = <&qup_1_spi_2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml new file mode 100644 index 000000000000..e2c7b934c50d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The QUP v3 core is a GENI based AHB slave that provides a common data path + (an output FIFO and an input FIFO) for serial peripheral interface (SPI) + mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + + SPI Controller nodes must be child of GENI based Qualcomm Universal + Peripharal. Please refer GENI based QUP wrapper controller node bindings + described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: qcom,geni-spi + + clocks: + maxItems: 1 + + clock-names: + const: se + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + + interrupts: + maxItems: 1 + + operating-points-v2: true + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + }; + + - | + #include <dt-bindings/dma/qcom-gpi.h> + + spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x00884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 44d08aa3fd85..b622bb7363ec 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -8,8 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> description: The QSPI controller allows SPI protocol communication in single, dual, or quad wire transmission modes for read/write access to slaves such diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt deleted file mode 100644 index 5c090771c016..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ /dev/null @@ -1,103 +0,0 @@ -Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP core is an AHB slave that provides a common data path (an output FIFO -and an input FIFO) for serial peripheral interface (SPI) mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Should contain: - "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. - "qcom,spi-qup-v2.1.1" for 8974 and later - "qcom,spi-qup-v2.2.1" for 8974 v2 and later. - -- reg: Should contain base register location and length -- interrupts: Interrupt number used by this controller - -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -- #address-cells: Number of cells required to define a chip select - address on the SPI bus. Should be set to 1. -- #size-cells: Should be zero. - -Optional properties: -- spi-max-frequency: Specifies maximum SPI clock frequency, - Units - Hz. Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -- num-cs: total number of chipselects -- cs-gpios: should specify GPIOs used for chipselects. - The gpios will be referred to as reg = <index> in the SPI child - nodes. If unspecified, a single SPI device without a chip - select can be used. - -- dmas: Two DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - spi_8: spi@f9964000 { /* BLSP2 QUP2 */ - - compatible = "qcom,spi-qup-v2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xf9964000 0x1000>; - interrupts = <0 102 0>; - spi-max-frequency = <19200000>; - - clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - - dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; - dma-names = "rx", "tx"; - - pinctrl-names = "default"; - pinctrl-0 = <&spi8_default>; - - device@0 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <19200000>; - spi-cpol; - }; - - device@1 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <9600000>; - spi-cpha; - }; - - device@2 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2>; /* Chip select 2 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - }; - - device@3 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <3>; /* Chip select 3 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - spi-cs-high; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml new file mode 100644 index 000000000000..93f14dd01afc --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The QUP core is an AHB slave that provides a common data path (an output FIFO + and an input FIFO) for serial peripheral interface (SPI) mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,spi-qup-v2.1.1 # for 8974 and later + - qcom,spi-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml index c0eccf703039..bab5d4b7fc3d 100644 --- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml @@ -56,4 +56,3 @@ examples: #address-cells = <1>; #size-cells = <0>; }; - diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index 200c7fc7b089..f012888656ec 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -78,7 +78,7 @@ spi0:spi@20bf0000 { interrupts = <338>; clocks = <&clkspi>; - flash: n25q032@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32"; diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index bda45ff3d294..0e382119c64f 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -143,7 +143,7 @@ examples: <&dma_controller 24 0>; dma-names = "rx", "tx"; - m25p80@1 { + flash@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt deleted file mode 100644 index ca645e21fe47..000000000000 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +++ /dev/null @@ -1,65 +0,0 @@ -Qualcomm SPMI Controller (PMIC Arbiter) - -The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI -controller with wrapping arbitration logic to allow for multiple on-chip -devices to control a single SPMI master. - -The PMIC Arbiter can also act as an interrupt controller, providing interrupts -to slave devices. - -See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI -controller binding requirements for child nodes. - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -generic interrupt controller binding documentation. - -Required properties: -- compatible : should be "qcom,spmi-pmic-arb". -- reg-names : must contain: - "core" - core registers - "intr" - interrupt controller registers - "cnfg" - configuration registers - Registers used only for V2 PMIC Arbiter: - "chnls" - tx-channel per virtual slave registers. - "obsrvr" - rx-channel (called observer) per virtual slave registers. - -- reg : address + size pairs describing the PMIC arb register sets; order must - correspond with the order of entries in reg-names -- #address-cells : must be set to 2 -- #size-cells : must be set to 0 -- qcom,ee : indicates the active Execution Environment identifier (0-5) -- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5) -- interrupts : interrupt list for the PMIC Arb controller, must contain a - single interrupt entry for the peripheral interrupt -- interrupt-names : corresponding interrupt names for the interrupts - listed in the 'interrupts' property, must contain: - "periph_irq" - summary interrupt for PMIC peripherals -- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller -- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple: - cell 1: slave ID for the requested interrupt (0-15) - cell 2: peripheral ID for requested interrupt (0-255) - cell 3: the requested peripheral interrupt (0-7) - cell 4: interrupt flags indicating level-sense information, as defined in - dt-bindings/interrupt-controller/irq.h - -Example: - - spmi { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - - interrupt-names = "periph_irq"; - interrupts = <0 190 0>; - - qcom,ee = <0>; - qcom,channel = <0>; - - #address-cells = <2>; - #size-cells = <0>; - - interrupt-controller; - #interrupt-cells = <4>; - }; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml new file mode 100644 index 000000000000..fee4f0eb4665 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller (PMIC Arbiter) + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control a single SPMI master. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +allOf: + - $ref: spmi.yaml + +properties: + compatible: + const: qcom,spmi-pmic-arb + + reg: + oneOf: + - items: # V1 + - description: core registers + - description: interrupt controller registers + - description: configuration registers + - items: # V2 + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + - description: interrupt controller registers + - description: configuration registers + + reg-names: + oneOf: + - items: + - const: core + - const: intr + - const: cnfg + - items: + - const: core + - const: chnls + - const: obsrvr + - const: intr + - const: cnfg + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#address-cells': true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + + '#size-cells': true + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +unevaluatedProperties: false + +examples: + - | + spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + }; + diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml index a9b7388ca9ac..e1587ddf7de3 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -18,6 +18,7 @@ description: properties: compatible: enum: + - qcom,sc8180x-lmh - qcom,sdm845-lmh - qcom,sm8150-lmh diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index 3ea8c0c1f45f..feb390d50696 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -10,7 +10,9 @@ maintainers: properties: compatible: - const: qcom,spmi-adc-tm5 + enum: + - qcom,spmi-adc-tm5 + - qcom,spmi-adc-tm5-gen2 reg: maxItems: 1 @@ -33,6 +35,7 @@ properties: qcom,avg-samples: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of samples to be used for measurement. + Not applicable for Gen2 ADC_TM peripheral. enum: - 1 - 2 @@ -45,6 +48,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: This parameter is used to decrease ADC sampling rate. Quicker measurements can be made by reducing decimation ratio. + Not applicable for Gen2 ADC_TM peripheral. enum: - 250 - 420 @@ -93,6 +97,29 @@ patternProperties: - const: 1 - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + qcom,avg-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of samples to be used for measurement. + This property in child node is applicable only for Gen2 ADC_TM peripheral. + enum: + - 1 + - 2 + - 4 + - 8 + - 16 + default: 1 + + qcom,decimation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + This property in child node is applicable only for Gen2 ADC_TM peripheral. + enum: + - 85 + - 340 + - 1360 + default: 1360 + required: - reg - io-channels @@ -100,6 +127,31 @@ patternProperties: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc-tm5 + + then: + patternProperties: + "^([-a-z0-9]*)@[0-7]$": + properties: + qcom,decimation: false + qcom,avg-samples: false + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc-tm5-gen2 + + then: + properties: + qcom,avg-samples: false + qcom,decimation: false + required: - compatible - reg @@ -124,7 +176,7 @@ examples: #size-cells = <0>; #io-channel-cells = <1>; - /* Other propreties are omitted */ + /* Other properties are omitted */ conn-therm@4f { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; @@ -148,4 +200,58 @@ examples: }; }; }; + + - | + #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> + #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> + #include <dt-bindings/interrupt-controller/irq.h> + spmi_bus { + #address-cells = <1>; + #size-cells = <0>; + pmk8350_vadc: adc@3100 { + reg = <0x3100>; + compatible = "qcom,spmi-adc7"; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Other properties are omitted */ + xo-therm@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + conn-therm@47 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + pmk8350_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8350-xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,decimation = <340>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>; + qcom,avg-samples = <2>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index b6406bcc683f..038d81338fcf 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -19,10 +19,11 @@ description: | properties: compatible: oneOf: - - description: msm9860 TSENS based + - description: msm8960 TSENS based items: - enum: - qcom,ipq8064-tsens + - qcom,msm8960-tsens - description: v0.1 of TSENS items: @@ -49,8 +50,10 @@ properties: - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens + - qcom,sc8280xp-tsens - qcom,sdm630-tsens - qcom,sdm845-tsens + - qcom,sm6350-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens - qcom,sm8350-tsens @@ -116,6 +119,7 @@ allOf: - qcom,ipq8064-tsens - qcom,mdm9607-tsens - qcom,msm8916-tsens + - qcom,msm8960-tsens - qcom,msm8974-tsens - qcom,msm8976-tsens - qcom,qcs404-tsens diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml index ccab9511a042..1d8373397848 100644 --- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml @@ -17,7 +17,9 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-tsu # RZ/G2UL - renesas,r9a07g044-tsu # RZ/G2{L,LC} + - renesas,r9a07g054-tsu # RZ/V2L - const: renesas,rzg2l-tsu reg: diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file mode 100644 index 000000000000..c74f124ebfc0 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + items: + - description: VTM cfg1 register space + - description: VTM cfg2 register space + - description: VTM efuse register space + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: thermal-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index c3386076a98c..7d821fd480f6 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -17,7 +17,6 @@ properties: maxItems: 1 interrupts: - minItems: 3 maxItems: 3 description: | A list of 3 interrupts; one per timer channel. diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt deleted file mode 100644 index 4db542c9a0fd..000000000000 --- a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt +++ /dev/null @@ -1,20 +0,0 @@ -RDA Micro RDA8810PL Timer - -Required properties: -- compatible : "rda,8810pl-timer" -- reg : Offset and length of the register set for the device. -- interrupts : Should contain two interrupts. -- interrupt-names : Should be "hwtimer", "ostimer". - -Example: - - apb@20900000 { - compatible = "simple-bus"; - ... - timer@10000 { - compatible = "rda,8810pl-timer"; - reg = <0x10000 0x1000>; - interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, - <17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hwtimer", "ostimer"; - }; diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml new file mode 100644 index 000000000000..f9043a4488d6 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro RDA8810PL Timer + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + const: rda,8810pl-timer + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: hwtimer + - const: ostimer + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + timer@20910000 { + compatible = "rda,8810pl-timer"; + reg = <0x20910000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; +... diff --git a/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt b/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt deleted file mode 100644 index e8792447a199..000000000000 --- a/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Renesas H8/300 16bit timer - -The 16bit timer is a 16bit timer/counter with configurable clock inputs and -programmable compare match. - -Required Properties: - - - compatible: must contain "renesas,16bit-timer" - - reg: base address and length of the registers block for the timer module. - - interrupts: interrupt-specifier for the timer, IMIA - - clocks: a list of phandle, one for each entry in clock-names. - - clock-names: must contain "peripheral_clk" for the functional clock. - - renesas,channel: timer channel number. - -Example: - - timer16: timer@ffff68 { - compatible = "reneas,16bit-timer"; - reg = <0xffff68 8>, <0xffff60 8>; - interrupts = <24>; - renesas,channel = <0>; - clocks = <&pclk>; - clock-names = "peripheral_clk"; - }; - diff --git a/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt b/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt deleted file mode 100644 index 9dca3759a0f0..000000000000 --- a/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Renesas H8/300 8bit timer - -The 8bit timer is a 8bit timer/counter with configurable clock inputs and -programmable compare match. - -This implement only supported cascade mode. - -Required Properties: - - - compatible: must contain "renesas,8bit-timer" - - reg: base address and length of the registers block for the timer module. - - interrupts: interrupt-specifier for the timer, CMIA and TOVI - - clocks: a list of phandle, one for each entry in clock-names. - - clock-names: must contain "fck" for the functional clock. - -Example: - - timer8_0: timer@ffff80 { - compatible = "renesas,8bit-timer"; - reg = <0xffff80 10>; - interrupts = <36>; - clocks = <&fclk>; - clock-names = "fck"; - }; - diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml index c399a019dde7..7207929e5cd6 100644 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -23,6 +23,7 @@ properties: - enum: - renesas,r7s72100-ostm # RZ/A1H - renesas,r7s9210-ostm # RZ/A2M + - renesas,r9a07g043-ostm # RZ/G2UL - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L - const: renesas,ostm # Generic @@ -54,6 +55,7 @@ if: compatible: contains: enum: + - renesas,r9a07g043-ostm - renesas,r9a07g044-ostm - renesas,r9a07g054-ostm then: diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index f11cbc7ccc14..9c81d00b12e0 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -19,18 +19,28 @@ description: |+ properties: compatible: - enum: - - samsung,exynos4210-mct - - samsung,exynos4412-mct + oneOf: + - enum: + - samsung,exynos4210-mct + - samsung,exynos4412-mct + - items: + - enum: + - samsung,exynos3250-mct + - samsung,exynos5250-mct + - samsung,exynos5260-mct + - samsung,exynos5420-mct + - samsung,exynos5433-mct + - samsung,exynos850-mct + - tesla,fsd-mct + - const: samsung,exynos4210-mct clocks: - minItems: 2 maxItems: 2 clock-names: items: - - pattern: "^(fin_pll|mct)$" - - pattern: "^(fin_pll|mct)$" + - const: fin_pll + - const: mct reg: maxItems: 1 @@ -63,6 +73,56 @@ required: - interrupts - reg +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos3250-mct + then: + properties: + interrupts: + minItems: 8 + maxItems: 8 + + - if: + properties: + compatible: + contains: + const: samsung,exynos5250-mct + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5260-mct + - samsung,exynos5420-mct + - samsung,exynos5433-mct + - samsung,exynos850-mct + then: + properties: + interrupts: + minItems: 12 + maxItems: 12 + + - if: + properties: + compatible: + contains: + enum: + - tesla,fsd-mct + then: + properties: + interrupts: + minItems: 16 + maxItems: 16 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml new file mode 100644 index 000000000000..e32df21e63a0 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ti,timer-dm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI dual-mode timer + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: | + The TI dual-mode timer is a general purpose timer with PWM capabilities. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am335x-timer + - ti,am335x-timer-1ms + - ti,am654-timer + - ti,dm814-timer + - ti,dm816-timer + - ti,omap2420-timer + - ti,omap3430-timer + - ti,omap4430-timer + - ti,omap5430-timer + - items: + - const: ti,am4372-timer + - const: ti,am335x-timer + - items: + - const: ti,am4372-timer-1ms + - const: ti,am335x-timer-1ms + + reg: + items: + - description: IO address + - description: L3 to L4 mapping for omap4/5 L4 ABE + minItems: 1 + + clocks: + items: + - description: Functional clock + - description: System clock for omap4/5 and dra7 + minItems: 1 + + clock-names: + items: + - const: fck + - const: timer_sys_ck + minItems: 1 + + interrupts: + description: + Interrupt if available. The timer PWM features may be usable + in a limited way even without interrupts. + maxItems: 1 + + ti,timer-alwon: + description: + Timer is always enabled when the SoC is powered. Note that some SoCs like + am335x can suspend to PM coprocessor RTC only mode and in that case the + SoC power is cut including timers. + type: boolean + + ti,timer-dsp: + description: + Timer is routable to the DSP in addition to the operating system. + type: boolean + + ti,timer-pwm: + description: + Timer has been wired for PWM capability. + type: boolean + + ti,timer-secure: + description: + Timer access has been limited to secure mode only. + type: boolean + + ti,hwmods: + description: + Name of the HWMOD associated with timer. This is for legacy + omap2/3 platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,am654-timer + then: + required: + - interrupts + + - if: + not: + properties: + compatible: + contains: + enum: + - ti,omap3430-timer + - ti,omap4430-timer + - ti,omap5430-timer + then: + properties: + reg: + maxItems: 1 + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - ti,dm814-timer + - ti,dm816-timer + - ti,omap2420-timer + - ti,omap3430-timer + then: + properties: + ti,hwmods: + items: + - pattern: "^timer([1-9]|1[0-2])$" + else: + properties: + ti,hwmods: false + +examples: + - | + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; +... diff --git a/Documentation/devicetree/bindings/timer/ti,timer.txt b/Documentation/devicetree/bindings/timer/ti,timer.txt deleted file mode 100644 index d02e27c764ec..000000000000 --- a/Documentation/devicetree/bindings/timer/ti,timer.txt +++ /dev/null @@ -1,44 +0,0 @@ -OMAP Timer bindings - -Required properties: -- compatible: Should be set to one of the below. Please note that - OMAP44xx devices have timer instances that are 100% - register compatible with OMAP3xxx devices as well as - newer timers that are not 100% register compatible. - So for OMAP44xx devices timer instances may use - different compatible strings. - - ti,omap2420-timer (applicable to OMAP24xx devices) - ti,omap3430-timer (applicable to OMAP3xxx/44xx devices) - ti,omap4430-timer (applicable to OMAP44xx devices) - ti,omap5430-timer (applicable to OMAP543x devices) - ti,am335x-timer (applicable to AM335x devices) - ti,am335x-timer-1ms (applicable to AM335x devices) - -- reg: Contains timer register address range (base address and - length). -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the OMAP device uses. -- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>", - where <X> is the instance number of the timer from the - HW spec. - -Optional properties: -- ti,timer-alwon: Indicates the timer is in an alway-on power domain. -- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in - addition to the ARM CPU. -- ti,timer-pwm: Indicates the timer can generate a PWM output. -- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device - and therefore cannot be used by the kernel. - -Example: - -timer12: timer@48304000 { - compatible = "ti,omap3430-timer"; - reg = <0x48304000 0x400>; - interrupts = <95>; - ti,hwmods = "timer12" - ti,timer-alwon; - ti,timer-secure; -}; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index c11520347a9d..6aafa71806a3 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -47,7 +47,9 @@ properties: - at,24c08 # i2c trusted platform module (TPM) - atmel,at97sc3204t - # i2c h/w symmetric crypto module + # ATSHA204 - i2c h/w symmetric crypto module + - atmel,atsha204 + # ATSHA204A - i2c h/w symmetric crypto module - atmel,atsha204a # i2c h/w elliptic curve crypto module - atmel,atecc508a @@ -87,6 +89,8 @@ properties: - devantech,srf08 # Devantech SRF10 ultrasonic ranger - devantech,srf10 + # DH electronics GmbH on-board CPLD trivial SPI device + - dh,dhcom-board # DA9053: flexible system level PMIC with multicore support - dlg,da9053 # DA9063: system PMIC for quad-core application processors @@ -219,6 +223,8 @@ properties: - memsic,mxc6255 # MEMSIC 3-axis accelerometer - memsic,mxc6655 + # Menlo on-board CPLD trivial SPI device + - menlo,m53cpld # Microchip differential I2C ADC, 1 Channel, 18 bit - microchip,mcp3421 # Microchip differential I2C ADC, 2 Channel, 18 bit diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index a5c5db6a0b2d..ba51fb1252b9 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -151,7 +151,7 @@ Example for HSIC: #address-cells = <1>; #size-cells = <0>; - usbnet: smsc@1 { + usbnet: ethernet@1 { compatible = "usb424,9730"; reg = <1>; }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 4cebce682d16..17fc471a12bd 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -139,12 +139,12 @@ properties: snps,need-phy-for-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that the phy needs to be left on for + description: If present indicates that the phy needs to be left on for remote wakeup during suspend. snps,reset-phy-on-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that we need to reset the PHY when we + description: If present indicates that we need to reset the PHY when we detect a wakeup. This is due to a hardware errata. port: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml index 1e8e1c22180e..8db1f8b597c3 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml @@ -50,6 +50,11 @@ examples: mt6360@34 { compatible = "mediatek,mt6360"; reg = <0x34>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + tcpc { compatible = "mediatek,mt6360-tcpc"; interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml index 39228a506b93..321b6f166197 100644 --- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml +++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml @@ -45,6 +45,7 @@ properties: property if all ports have to be enabled. initial-mode: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2] description: > Specifies initial mode. 1 for Hub mode, 2 for standby mode. @@ -77,7 +78,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - + usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 65ff22364fb3..495a01ced97e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -283,6 +283,8 @@ patternProperties: description: Shenzen Chuangsiqi Technology Co.,Ltd. "^ctera,.*": description: CTERA Networks Intl. + "^ctu,.*": + description: Czech Technical University in Prague "^cubietech,.*": description: Cubietech, Ltd. "^cui,.*": @@ -383,6 +385,8 @@ patternProperties: description: Empire Electronix "^emtrion,.*": description: emtrion GmbH + "^enclustra,.*": + description: Enclustra GmbH "^endless,.*": description: Endless Mobile, Inc. "^ene,.*": @@ -1132,6 +1136,8 @@ patternProperties: description: Sinlinx Electronics Technology Co., LTD "^sinovoip,.*": description: SinoVoip Co., Ltd + "^sinowealth,.*": + description: SINO WEALTH Electronic Ltd. "^sipeed,.*": description: Shenzhen Sipeed Technology Co., Ltd. "^sirf,.*": @@ -1195,6 +1201,8 @@ patternProperties: description: StorLink Semiconductors, Inc. "^storm,.*": description: Storm Semiconductor, Inc. + "^storopack,.*": + description: Storopack "^summit,.*": description: Summit microelectronics "^sunchip,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index 43afa24513b9..cbcf19f51411 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -26,10 +26,8 @@ properties: - allwinner,sun50i-h616-wdt - allwinner,sun50i-r329-wdt - allwinner,sun50i-r329-wdt-reset + - allwinner,suniv-f1c100s-wdt - const: allwinner,sun6i-a31-wdt - - items: - - const: allwinner,suniv-f1c100s-wdt - - const: allwinner,sun4i-a10-wdt - const: allwinner,sun20i-d1-wdt - items: - const: allwinner,sun20i-d1-wdt-reset @@ -41,14 +39,8 @@ properties: clocks: minItems: 1 items: - - description: High-frequency oscillator input, divided internally - - description: Low-frequency oscillator input, only found on some variants - - clock-names: - minItems: 1 - items: - - const: hosc - - const: losc + - description: 32 KHz input clock + - description: secondary clock source interrupts: maxItems: 1 @@ -73,9 +65,14 @@ then: properties: clocks: minItems: 2 + items: + - description: High-frequency oscillator input, divided internally + - description: Low-frequency oscillator input clock-names: - minItems: 2 + items: + - const: hosc + - const: losc required: - clock-names @@ -85,9 +82,6 @@ else: clocks: maxItems: 1 - clock-names: - maxItems: 1 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst index 18d9e0689d49..5465eced2af1 100644 --- a/Documentation/devicetree/bindings/writing-bindings.rst +++ b/Documentation/devicetree/bindings/writing-bindings.rst @@ -58,6 +58,31 @@ Properties - DO define properties in terms of constraints. How many entries? What are possible values? What is the order? +Typical cases and caveats +========================= + +- Phandle entries, like clocks/dmas/interrupts/resets, should always be + explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is + more than one phandle. When used, both of these fields need the same + constraints (e.g. list of items). + +- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix, + e.g.: "tx" instead of "txirq" (for interrupt). + +- Properties without schema types (e.g. without standard suffix or not defined + by schema) need the type, even if this is an enum. + +- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use + "unevaluatedProperties:false". In other cases, usually use + "additionalProperties:false". + +- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather + device-based compatible (e.g. SoC-based compatible), instead of custom + versioning of that component. + For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2". + +- "syscon" is not a generic property. Use vendor and type, e.g. + "vendor,power-manager-syscon". Board/SoC .dts Files ==================== diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst index 95ecf55559e5..4a381d20f2b4 100644 --- a/Documentation/devicetree/bindings/writing-schema.rst +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -108,6 +108,12 @@ The YAML Devicetree format also makes all string values an array and scalar values a matrix (in order to define groupings) even when only a single value is present. Single entries in schemas are fixed up to match this encoding. +Coding style +------------ + +Use YAML coding style (two-space indentation). For DTS examples in the schema, +preferred is four-space indentation. + Testing ------- @@ -128,6 +134,8 @@ installed first. On Debian/Ubuntu systems:: Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be installed. Ensure they are in your PATH (~/.local/bin by default). +Recommended is also to install yamllint (used by dtschema when present). + Running checks ~~~~~~~~~~~~~~ diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst index b2b8db765b8c..e139f22b363e 100644 --- a/Documentation/devicetree/overlay-notes.rst +++ b/Documentation/devicetree/overlay-notes.rst @@ -119,10 +119,32 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_remove_all() which will remove every single one in the correct order. -In addition, there is the option to register notifiers that get called on +There is the option to register notifiers that get called on overlay operations. See of_overlay_notifier_register/unregister and enum of_overlay_notify_action for details. -Note that a notifier callback is not supposed to store pointers to a device -tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the -respective node it received. +A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or +OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay +or its content but these pointers must not persist past the notifier callback +for OF_OVERLAY_POST_REMOVE. The memory containing the overlay will be +kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called. Note that the +memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE +returns an error. + +The changeset notifiers in drivers/of/dynamic.c are a second type of notifier +that could be triggered by applying or removing an overlay. These notifiers +are not allowed to store pointers to a device tree node in the overlay +or its content. The overlay code does not protect against such pointers +remaining active when the memory containing the overlay is freed as a result +of removing the overlay. + +Any other code that retains a pointer to the overlay nodes or data is +considered to be a bug because after removing the overlay the pointer +will refer to freed memory. + +Users of overlays must be especially aware of the overall operations that +occur on the system to ensure that other kernel code does not retain any +pointers to the overlay nodes or data. Any example of an inadvertent use +of such pointers is if a driver or subsystem module is loaded after an +overlay has been applied, and the driver or subsystem scans the entire +devicetree or a large portion of it, including the overlay nodes. diff --git a/Documentation/doc-guide/contributing.rst b/Documentation/doc-guide/contributing.rst index 207fd93d7c80..d4793826ad9a 100644 --- a/Documentation/doc-guide/contributing.rst +++ b/Documentation/doc-guide/contributing.rst @@ -79,8 +79,9 @@ simplistic idea of what C comment blocks look like. This problem had been present since that comment was added in 2016 — a full four years. Fixing it was a matter of adding the missing asterisks. A quick look at the history for that file showed what the normal format for subject lines is, -and ``scripts/get_maintainer.pl`` told me who should receive it. The -resulting patch looked like this:: +and ``scripts/get_maintainer.pl`` told me who should receive it (pass paths to +your patches as arguments to scripts/get_maintainer.pl). The resulting patch +looked like this:: [PATCH] PM / devfreq: Fix two malformed kerneldoc comments diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index 79aaa55d6bcf..a7cb2afd7990 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -1,3 +1,4 @@ +=========================== Writing kernel-doc comments =========================== @@ -436,6 +437,7 @@ The title following ``DOC:`` acts as a heading within the source file, but also as an identifier for extracting the documentation comment. Thus, the title must be unique within the file. +============================= Including kernel-doc comments ============================= diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index bb36f18ae9ac..2ff1ab4158d4 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -1,7 +1,8 @@ .. _sphinxdoc: -Introduction -============ +===================================== +Using Sphinx for kernel documentation +===================================== The Linux kernel uses `Sphinx`_ to generate pretty documentation from `reStructuredText`_ files under ``Documentation``. To build the documentation in diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst index 0072c9c7efd3..1e0f1f85d10e 100644 --- a/Documentation/driver-api/dmaengine/provider.rst +++ b/Documentation/driver-api/dmaengine/provider.rst @@ -206,6 +206,12 @@ Currently, the types available are: - The device is able to perform parity check using RAID6 P+Q algorithm against a memory buffer. +- DMA_MEMSET + + - The device is able to fill memory with the provided pattern + + - The pattern is treated as a single byte signed value. + - DMA_INTERRUPT - The device is able to trigger a dummy transfer that will @@ -457,7 +463,7 @@ supported. - Should use dma_set_residue to report it - In the case of a cyclic transfer, it should only take into - account the current period. + account the total size of the cyclic buffer. - Should return DMA_OUT_OF_ORDER if the device does not support in order completion and is completing the operation out of order. diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 5018403fe82f..2d39967bafcc 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -249,7 +249,7 @@ CLOCK devm_clk_bulk_get() devm_clk_bulk_get_all() devm_clk_bulk_get_optional() - devm_get_clk_from_childl() + devm_get_clk_from_child() devm_clk_hw_register() devm_of_clk_add_hw_provider() devm_clk_hw_register_clkdev() diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst index a1ddefa1f55f..70ff43ac4fcc 100644 --- a/Documentation/driver-api/gpio/driver.rst +++ b/Documentation/driver-api/gpio/driver.rst @@ -429,7 +429,8 @@ call into the core gpiolib code: static void my_gpio_mask_irq(struct irq_data *d) { - struct gpio_chip *gc = irq_desc_get_handler_data(d); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + irq_hw_number_t hwirq = irqd_to_hwirq(d); /* * Perform any necessary action to mask the interrupt, @@ -437,14 +438,15 @@ call into the core gpiolib code: * state. */ - gpiochip_disable_irq(gc, d->hwirq); + gpiochip_disable_irq(gc, hwirq); } static void my_gpio_unmask_irq(struct irq_data *d) { - struct gpio_chip *gc = irq_desc_get_handler_data(d); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + irq_hw_number_t hwirq = irqd_to_hwirq(d); - gpiochip_enable_irq(gc, d->hwirq); + gpiochip_enable_irq(gc, hwirq); /* * Perform any necessary action to unmask the interrupt, @@ -501,7 +503,8 @@ the interrupt separately and go with it: static void my_gpio_mask_irq(struct irq_data *d) { - struct gpio_chip *gc = irq_desc_get_handler_data(d); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + irq_hw_number_t hwirq = irqd_to_hwirq(d); /* * Perform any necessary action to mask the interrupt, @@ -509,14 +512,15 @@ the interrupt separately and go with it: * state. */ - gpiochip_disable_irq(gc, d->hwirq); + gpiochip_disable_irq(gc, hwirq); } static void my_gpio_unmask_irq(struct irq_data *d) { - struct gpio_chip *gc = irq_desc_get_handler_data(d); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + irq_hw_number_t hwirq = irqd_to_hwirq(d); - gpiochip_enable_irq(gc, d->hwirq); + gpiochip_enable_irq(gc, hwirq); /* * Perform any necessary action to unmask the interrupt, @@ -576,7 +580,8 @@ In this case the typical set-up will look like this: static void my_gpio_mask_irq(struct irq_data *d) { - struct gpio_chip *gc = irq_desc_get_handler_data(d); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + irq_hw_number_t hwirq = irqd_to_hwirq(d); /* * Perform any necessary action to mask the interrupt, @@ -584,15 +589,16 @@ In this case the typical set-up will look like this: * state. */ - gpiochip_disable_irq(gc, d->hwirq); + gpiochip_disable_irq(gc, hwirq); irq_mask_mask_parent(d); } static void my_gpio_unmask_irq(struct irq_data *d) { - struct gpio_chip *gc = irq_desc_get_handler_data(d); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + irq_hw_number_t hwirq = irqd_to_hwirq(d); - gpiochip_enable_irq(gc, d->hwirq); + gpiochip_enable_irq(gc, hwirq); /* * Perform any necessary action to unmask the interrupt, diff --git a/Documentation/driver-api/media/cec-core.rst b/Documentation/driver-api/media/cec-core.rst index c6194ee81c41..ae0d20798edc 100644 --- a/Documentation/driver-api/media/cec-core.rst +++ b/Documentation/driver-api/media/cec-core.rst @@ -109,6 +109,7 @@ your driver: int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); + void (*adap_configured)(struct cec_adapter *adap, bool configured); int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); @@ -117,7 +118,7 @@ your driver: /* Error injection callbacks */ ... - /* High-level callbacks */ + /* High-level callback */ ... }; @@ -178,6 +179,16 @@ can receive directed messages to that address. Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID. +Called when the adapter is fully configured or unconfigured:: + + void (*adap_configured)(struct cec_adapter *adap, bool configured); + +If configured == true, then the adapter is fully configured, i.e. all logical +addresses have been successfully claimed. If configured == false, then the +adapter is unconfigured. If the driver has to take specific actions after +(un)configuration, then that can be done through this optional callback. + + To transmit a new message:: int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, diff --git a/Documentation/driver-api/media/mc-core.rst b/Documentation/driver-api/media/mc-core.rst index 57b5bbba944e..02481a2513b9 100644 --- a/Documentation/driver-api/media/mc-core.rst +++ b/Documentation/driver-api/media/mc-core.rst @@ -42,9 +42,16 @@ Allocation of the structure is handled by the media device driver, usually by embedding the :c:type:`media_device` instance in a larger driver-specific structure. -Drivers register media device instances by calling -:c:func:`__media_device_register()` via the macro ``media_device_register()`` -and unregistered by calling :c:func:`media_device_unregister()`. +Drivers initialise media device instances by calling +:c:func:`media_device_init()`. After initialising a media device instance, it is +registered by calling :c:func:`__media_device_register()` via the macro +``media_device_register()`` and unregistered by calling +:c:func:`media_device_unregister()`. An initialised media device must be +eventually cleaned up by calling :c:func:`media_device_cleanup()`. + +Note that it is not allowed to unregister a media device instance that was not +previously registered, or clean up a media device instance that was not +previously initialised. Entities ^^^^^^^^ diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst index 08ea2673b19e..cf3b52bdbfb9 100644 --- a/Documentation/driver-api/media/v4l2-subdev.rst +++ b/Documentation/driver-api/media/v4l2-subdev.rst @@ -518,6 +518,75 @@ The :c:func:`v4l2_i2c_new_subdev` function will call :c:type:`i2c_board_info` structure using the ``client_type`` and the ``addr`` to fill it. +Centrally managed subdev active state +------------------------------------- + +Traditionally V4L2 subdev drivers maintained internal state for the active +device configuration. This is often implemented as e.g. an array of struct +v4l2_mbus_framefmt, one entry for each pad, and similarly for crop and compose +rectangles. + +In addition to the active configuration, each subdev file handle has an array of +struct v4l2_subdev_pad_config, managed by the V4L2 core, which contains the try +configuration. + +To simplify the subdev drivers the V4L2 subdev API now optionally supports a +centrally managed active configuration represented by +:c:type:`v4l2_subdev_state`. One instance of state, which contains the active +device configuration, is stored in the sub-device itself as part of +the :c:type:`v4l2_subdev` structure, while the core associates a try state to +each open file handle, to store the try configuration related to that file +handle. + +Sub-device drivers can opt-in and use state to manage their active configuration +by initializing the subdevice state with a call to v4l2_subdev_init_finalize() +before registering the sub-device. They must also call v4l2_subdev_cleanup() +to release all the allocated resources before unregistering the sub-device. +The core automatically allocates and initializes a state for each open file +handle to store the try configurations and frees it when closing the file +handle. + +V4L2 sub-device operations that use both the :ref:`ACTIVE and TRY formats +<v4l2-subdev-format-whence>` receive the correct state to operate on through +the 'state' parameter. The state must be locked and unlocked by the +caller by calling :c:func:`v4l2_subdev_lock_state()` and +:c:func:`v4l2_subdev_unlock_state()`. The caller can do so by calling the subdev +operation through the :c:func:`v4l2_subdev_call_state_active()` macro. + +Operations that do not receive a state parameter implicitly operate on the +subdevice active state, which drivers can exclusively access by +calling :c:func:`v4l2_subdev_lock_and_get_active_state()`. The sub-device active +state must equally be released by calling :c:func:`v4l2_subdev_unlock_state()`. + +Drivers must never manually access the state stored in the :c:type:`v4l2_subdev` +or in the file handle without going through the designated helpers. + +While the V4L2 core passes the correct try or active state to the subdevice +operations, many existing device drivers pass a NULL state when calling +operations with :c:func:`v4l2_subdev_call()`. This legacy construct causes +issues with subdevice drivers that let the V4L2 core manage the active state, +as they expect to receive the appropriate state as a parameter. To help the +conversion of subdevice drivers to a managed active state without having to +convert all callers at the same time, an additional wrapper layer has been +added to v4l2_subdev_call(), which handles the NULL case by geting and locking +the callee's active state with :c:func:`v4l2_subdev_lock_and_get_active_state()`, +and unlocking the state after the call. + +The whole subdev state is in reality split into three parts: the +v4l2_subdev_state, subdev controls and subdev driver's internal state. In the +future these parts should be combined into a single state. For the time being +we need a way to handle the locking for these parts. This can be accomplished +by sharing a lock. The v4l2_ctrl_handler already supports this via its 'lock' +pointer and the same model is used with states. The driver can do the following +before calling v4l2_subdev_init_finalize(): + +.. code-block:: c + + sd->ctrl_handler->lock = &priv->mutex; + sd->state_lock = &priv->mutex; + +This shares the driver's private mutex between the controls and the states. + V4L2 sub-device functions and data structures --------------------------------------------- diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst index 96668dca753a..372bdb4d04c6 100644 --- a/Documentation/driver-api/thermal/intel_dptf.rst +++ b/Documentation/driver-api/thermal/intel_dptf.rst @@ -4,7 +4,7 @@ Intel(R) Dynamic Platform and Thermal Framework Sysfs Interface =============================================================== -:Copyright: |copy| 2022 Intel Corporation +:Copyright: © 2022 Intel Corporation :Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> diff --git a/Documentation/driver-api/vfio-mediated-device.rst b/Documentation/driver-api/vfio-mediated-device.rst index 9f26079cacae..784bbeb22adc 100644 --- a/Documentation/driver-api/vfio-mediated-device.rst +++ b/Documentation/driver-api/vfio-mediated-device.rst @@ -105,6 +105,7 @@ structure to represent a mediated device's driver:: struct mdev_driver { int (*probe) (struct mdev_device *dev); void (*remove) (struct mdev_device *dev); + struct attribute_group **supported_type_groups; struct device_driver driver; }; @@ -119,33 +120,15 @@ to register and unregister itself with the core driver: extern void mdev_unregister_driver(struct mdev_driver *drv); -The mediated bus driver is responsible for adding mediated devices to the VFIO -group when devices are bound to the driver and removing mediated devices from -the VFIO when devices are unbound from the driver. - - -Physical Device Driver Interface --------------------------------- - -The physical device driver interface provides the mdev_parent_ops[3] structure -to define the APIs to manage work in the mediated core driver that is related -to the physical device. - -The structures in the mdev_parent_ops structure are as follows: - -* dev_attr_groups: attributes of the parent device -* mdev_attr_groups: attributes of the mediated device -* supported_config: attributes to define supported configurations -* device_driver: device driver to bind for mediated device instances - -The mdev_parent_ops also still has various functions pointers. Theses exist -for historical reasons only and shall not be used for new drivers. +The mediated bus driver's probe function should create a vfio_device on top of +the mdev_device and connect it to an appropriate implementation of +vfio_device_ops. When a driver wants to add the GUID creation sysfs to an existing device it has probe'd to then it should call:: extern int mdev_register_device(struct device *dev, - const struct mdev_parent_ops *ops); + struct mdev_driver *mdev_driver); This will provide the 'mdev_supported_types/XX/create' files which can then be used to trigger the creation of a mdev_device. The created mdev_device will be diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst index 4a25c5eb6f07..eb9c2d9a4f5f 100644 --- a/Documentation/fault-injection/fault-injection.rst +++ b/Documentation/fault-injection/fault-injection.rst @@ -132,16 +132,16 @@ configuration of fault-injection capabilities. Format: { 'Y' | 'N' } - default is 'N', setting it to 'Y' won't inject failures into - highmem/user allocations. + default is 'Y', setting it to 'N' will also inject failures into + highmem/user allocations (__GFP_HIGHMEM allocations). - /sys/kernel/debug/failslab/ignore-gfp-wait: - /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait: Format: { 'Y' | 'N' } - default is 'N', setting it to 'Y' will inject failures - only into non-sleep allocations (GFP_ATOMIC allocations). + default is 'Y', setting it to 'N' will also inject failures + into allocations that can sleep (__GFP_DIRECT_RECLAIM allocations). - /sys/kernel/debug/fail_page_alloc/min-order: @@ -280,7 +280,7 @@ Application Examples printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times echo 0 > /sys/kernel/debug/$FAILTYPE/space echo 2 > /sys/kernel/debug/$FAILTYPE/verbose - echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait faulty_system() { @@ -334,8 +334,8 @@ Application Examples printf %#x -1 > /sys/kernel/debug/$FAILTYPE/times echo 0 > /sys/kernel/debug/$FAILTYPE/space echo 2 > /sys/kernel/debug/$FAILTYPE/verbose - echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait - echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt index 77bd6974dd6d..10482dee8703 100644 --- a/Documentation/features/core/cBPF-JIT/arch-support.txt +++ b/Documentation/features/core/cBPF-JIT/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | TODO | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt index d5ab547b2be6..bcefb5afc7d6 100644 --- a/Documentation/features/core/eBPF-JIT/arch-support.txt +++ b/Documentation/features/core/eBPF-JIT/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index ddb3762ca7f5..d80d99449ac1 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | ok | | ia64: | ok | | m68k: | TODO | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index d5380ef68713..53eab154925d 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/core/thread-info-in-task/arch-support.txt b/Documentation/features/core/thread-info-in-task/arch-support.txt index 0654ba3a42ff..94926451afb9 100644 --- a/Documentation/features/core/thread-info-in-task/arch-support.txt +++ b/Documentation/features/core/thread-info-in-task/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index 8e95dc0c7b90..b4274b8141b6 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | ok | | ia64: | ok | | m68k: | TODO | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 407ca1d91242..c15bb4b21b6f 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt index ff21a83abe62..4c31fc92a312 100644 --- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt +++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 49e0dda11227..d7a5ac4bc1fe 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/kcov/arch-support.txt b/Documentation/features/debug/kcov/arch-support.txt index 3d34b724ddae..136e14c2b603 100644 --- a/Documentation/features/debug/kcov/arch-support.txt +++ b/Documentation/features/debug/kcov/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 7aa073d908c5..5b3f3d8ae462 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | ok | | hexagon: | ok | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/kmemleak/arch-support.txt b/Documentation/features/debug/kmemleak/arch-support.txt index 5c784ff9768a..7a2eab4fdf9d 100644 --- a/Documentation/features/debug/kmemleak/arch-support.txt +++ b/Documentation/features/debug/kmemleak/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index a1f6e98c6b1f..db02ab194138 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | TODO | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index e7e7015175e7..ec186e7deebc 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | | m68k: | TODO | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index 838eb53a6fa5..4b7865e693f6 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | | m68k: | TODO | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index 6358b00b1723..5d9befa041c7 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | TODO | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index f6cdf781305f..d97fd38460e6 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index 0b871e797d24..d30e3475904e 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index a2feda7adff1..9ae1fa2eb27c 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | TODO | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 9b407f26d45e..9e09988eb654 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index 090520b0e02d..5c4ec316dbac 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index 6d840b103537..65007c1ac44f 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index de586be05d64..20056670fb09 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 29d0c8b7b1c5..707514faac7b 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 881a8a50e41e..9f31ce9b9f2a 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index 7639a796a8e1..f148c4329c7a 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index df1a4c679a45..32c88b6a910c 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index 51b7afc937f1..d82a1f0cdc91 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -34,7 +34,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index d0e308135434..2687564e5fa8 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -11,7 +11,6 @@ | arm: | .. | | arm64: | ok | | csky: | .. | - | h8300: | .. | | hexagon: | .. | | ia64: | TODO | | m68k: | .. | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index 05613c5ff560..1b4109199e9d 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index b4c96ebab7e3..27327256bd05 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index 3f6976052e2a..b9a4bda2c8f5 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | ok | | csky: | ok | - | h8300: | ok | | hexagon: | ok | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index 72e7aadeda7e..4aa51c9fa32b 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 3cea25b80c8c..0306ece41faa 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | .. | | m68k: | TODO | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index c905aa3c1d81..5d64e40c0092 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | ok | - | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | | m68k: | TODO | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index 73ec761f1e27..92c9db24a6a3 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index 9066a90b38d9..7424fea37614 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | TODO | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | | m68k: | TODO | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index f717ab792e5a..60985067626b 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | .. | - | h8300: | .. | | hexagon: | .. | | ia64: | TODO | | m68k: | .. | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index 6fa76a37f299..f2dcbec6020e 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | N/A | | csky: | TODO | - | h8300: | .. | | hexagon: | TODO | | ia64: | TODO | | m68k: | .. | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index 6e1792ee37fe..680090df03e1 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index a6dcbe5f47b6..205a90e82050 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -11,7 +11,6 @@ | arm: | TODO | | arm64: | TODO | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index 376477749c42..9f16d6e4e11e 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -11,7 +11,6 @@ | arm: | ok | | arm64: | ok | | csky: | TODO | - | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | | m68k: | TODO | diff --git a/Documentation/filesystems/caching/cachefiles.rst b/Documentation/filesystems/caching/cachefiles.rst index 8bf396b76359..fc7abf712315 100644 --- a/Documentation/filesystems/caching/cachefiles.rst +++ b/Documentation/filesystems/caching/cachefiles.rst @@ -28,6 +28,7 @@ Cache on Already Mounted Filesystem (*) Debugging. + (*) On-demand Read. Overview @@ -482,3 +483,180 @@ the control file. For example:: echo $((1|4|8)) >/sys/module/cachefiles/parameters/debug will turn on all function entry debugging. + + +On-demand Read +============== + +When working in its original mode, CacheFiles serves as a local cache for a +remote networking fs - while in on-demand read mode, CacheFiles can boost the +scenario where on-demand read semantics are needed, e.g. container image +distribution. + +The essential difference between these two modes is seen when a cache miss +occurs: In the original mode, the netfs will fetch the data from the remote +server and then write it to the cache file; in on-demand read mode, fetching +the data and writing it into the cache is delegated to a user daemon. + +``CONFIG_CACHEFILES_ONDEMAND`` should be enabled to support on-demand read mode. + + +Protocol Communication +---------------------- + +The on-demand read mode uses a simple protocol for communication between kernel +and user daemon. The protocol can be modeled as:: + + kernel --[request]--> user daemon --[reply]--> kernel + +CacheFiles will send requests to the user daemon when needed. The user daemon +should poll the devnode ('/dev/cachefiles') to check if there's a pending +request to be processed. A POLLIN event will be returned when there's a pending +request. + +The user daemon then reads the devnode to fetch a request to process. It should +be noted that each read only gets one request. When it has finished processing +the request, the user daemon should write the reply to the devnode. + +Each request starts with a message header of the form:: + + struct cachefiles_msg { + __u32 msg_id; + __u32 opcode; + __u32 len; + __u32 object_id; + __u8 data[]; + }; + +where: + + * ``msg_id`` is a unique ID identifying this request among all pending + requests. + + * ``opcode`` indicates the type of this request. + + * ``object_id`` is a unique ID identifying the cache file operated on. + + * ``data`` indicates the payload of this request. + + * ``len`` indicates the whole length of this request, including the + header and following type-specific payload. + + +Turning on On-demand Mode +------------------------- + +An optional parameter becomes available to the "bind" command:: + + bind [ondemand] + +When the "bind" command is given no argument, it defaults to the original mode. +When it is given the "ondemand" argument, i.e. "bind ondemand", on-demand read +mode will be enabled. + + +The OPEN Request +---------------- + +When the netfs opens a cache file for the first time, a request with the +CACHEFILES_OP_OPEN opcode, a.k.a an OPEN request will be sent to the user +daemon. The payload format is of the form:: + + struct cachefiles_open { + __u32 volume_key_size; + __u32 cookie_key_size; + __u32 fd; + __u32 flags; + __u8 data[]; + }; + +where: + + * ``data`` contains the volume_key followed directly by the cookie_key. + The volume key is a NUL-terminated string; the cookie key is binary + data. + + * ``volume_key_size`` indicates the size of the volume key in bytes. + + * ``cookie_key_size`` indicates the size of the cookie key in bytes. + + * ``fd`` indicates an anonymous fd referring to the cache file, through + which the user daemon can perform write/llseek file operations on the + cache file. + + +The user daemon can use the given (volume_key, cookie_key) pair to distinguish +the requested cache file. With the given anonymous fd, the user daemon can +fetch the data and write it to the cache file in the background, even when +kernel has not triggered a cache miss yet. + +Be noted that each cache file has a unique object_id, while it may have multiple +anonymous fds. The user daemon may duplicate anonymous fds from the initial +anonymous fd indicated by the @fd field through dup(). Thus each object_id can +be mapped to multiple anonymous fds, while the usr daemon itself needs to +maintain the mapping. + +When implementing a user daemon, please be careful of RLIMIT_NOFILE, +``/proc/sys/fs/nr_open`` and ``/proc/sys/fs/file-max``. Typically these needn't +be huge since they're related to the number of open device blobs rather than +open files of each individual filesystem. + +The user daemon should reply the OPEN request by issuing a "copen" (complete +open) command on the devnode:: + + copen <msg_id>,<cache_size> + +where: + + * ``msg_id`` must match the msg_id field of the OPEN request. + + * When >= 0, ``cache_size`` indicates the size of the cache file; + when < 0, ``cache_size`` indicates any error code encountered by the + user daemon. + + +The CLOSE Request +----------------- + +When a cookie withdrawn, a CLOSE request (opcode CACHEFILES_OP_CLOSE) will be +sent to the user daemon. This tells the user daemon to close all anonymous fds +associated with the given object_id. The CLOSE request has no extra payload, +and shouldn't be replied. + + +The READ Request +---------------- + +When a cache miss is encountered in on-demand read mode, CacheFiles will send a +READ request (opcode CACHEFILES_OP_READ) to the user daemon. This tells the user +daemon to fetch the contents of the requested file range. The payload is of the +form:: + + struct cachefiles_read { + __u64 off; + __u64 len; + }; + +where: + + * ``off`` indicates the starting offset of the requested file range. + + * ``len`` indicates the length of the requested file range. + + +When it receives a READ request, the user daemon should fetch the requested data +and write it to the cache file identified by object_id. + +When it has finished processing the READ request, the user daemon should reply +by using the CACHEFILES_IOC_READ_COMPLETE ioctl on one of the anonymous fds +associated with the object_id given in the READ request. The ioctl is of the +form:: + + ioctl(fd, CACHEFILES_IOC_READ_COMPLETE, msg_id); + +where: + + * ``fd`` is one of the anonymous fds associated with the object_id + given. + + * ``msg_id`` must match the msg_id field of the READ request. diff --git a/Documentation/filesystems/caching/netfs-api.rst b/Documentation/filesystems/caching/netfs-api.rst index 7308d76a29dc..1d18e9def183 100644 --- a/Documentation/filesystems/caching/netfs-api.rst +++ b/Documentation/filesystems/caching/netfs-api.rst @@ -433,11 +433,11 @@ has done a write and then the page it wrote from has been released by the VM, after which it *has* to look in the cache. To inform fscache that a page might now be in the cache, the following function -should be called from the ``releasepage`` address space op:: +should be called from the ``release_folio`` address space op:: void fscache_note_page_release(struct fscache_cookie *cookie); -if the page has been released (ie. releasepage returned true). +if the page has been released (ie. release_folio returned true). Page release and page invalidation should also wait for any mark left on the page to say that a DIO write is underway from that page:: diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index 6ccd5efb25b7..2e9aaa295125 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -1256,7 +1256,7 @@ inline encryption hardware will encrypt/decrypt the file contents. When inline encryption isn't used, filesystems must encrypt/decrypt the file contents themselves, as described below: -For the read path (->readpage()) of regular files, filesystems can +For the read path (->read_folio()) of regular files, filesystems can read the ciphertext into the page cache and decrypt it in-place. The page lock must be held until decryption has finished, to prevent the page from becoming visible to userspace prematurely. diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst index b7d42fd65e9d..756f2c215ba1 100644 --- a/Documentation/filesystems/fsverity.rst +++ b/Documentation/filesystems/fsverity.rst @@ -559,7 +559,7 @@ already verified). Below, we describe how filesystems implement this. Pagecache ~~~~~~~~~ -For filesystems using Linux's pagecache, the ``->readpage()`` and +For filesystems using Linux's pagecache, the ``->read_folio()`` and ``->readahead()`` methods must be modified to verify pages before they are marked Uptodate. Merely hooking ``->read_iter()`` would be insufficient, since ``->read_iter()`` is not used for memory maps. diff --git a/Documentation/filesystems/idmappings.rst b/Documentation/filesystems/idmappings.rst index 7a879ec3b6bf..c1db8748389c 100644 --- a/Documentation/filesystems/idmappings.rst +++ b/Documentation/filesystems/idmappings.rst @@ -369,6 +369,11 @@ kernel maps the caller's userspace id down into a kernel id according to the caller's idmapping and then maps that kernel id up according to the filesystem's idmapping. +Let's see some examples with caller/filesystem idmapping but without mount +idmappings. This will exhibit some problems we can hit. After that we will +revisit/reconsider these examples, this time using mount idmappings, to see how +they can solve the problems we observed before. + Example 1 ~~~~~~~~~ diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index c26d854275a0..c0fe711f14d3 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -237,20 +237,20 @@ address_space_operations prototypes:: int (*writepage)(struct page *page, struct writeback_control *wbc); - int (*readpage)(struct file *, struct page *); + int (*read_folio)(struct file *, struct folio *); int (*writepages)(struct address_space *, struct writeback_control *); bool (*dirty_folio)(struct address_space *, struct folio *folio); void (*readahead)(struct readahead_control *); int (*write_begin)(struct file *, struct address_space *mapping, - loff_t pos, unsigned len, unsigned flags, + loff_t pos, unsigned len, struct page **pagep, void **fsdata); int (*write_end)(struct file *, struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, struct page *page, void *fsdata); sector_t (*bmap)(struct address_space *, sector_t); void (*invalidate_folio) (struct folio *, size_t start, size_t len); - int (*releasepage) (struct page *, int); - void (*freepage)(struct page *); + bool (*release_folio)(struct folio *, gfp_t); + void (*free_folio)(struct folio *); int (*direct_IO)(struct kiocb *, struct iov_iter *iter); bool (*isolate_page) (struct page *, isolate_mode_t); int (*migratepage)(struct address_space *, struct page *, struct page *); @@ -258,26 +258,27 @@ prototypes:: int (*launder_folio)(struct folio *); bool (*is_partially_uptodate)(struct folio *, size_t from, size_t count); int (*error_remove_page)(struct address_space *, struct page *); - int (*swap_activate)(struct file *); + int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span) int (*swap_deactivate)(struct file *); + int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter); locking rules: - All except dirty_folio and freepage may block + All except dirty_folio and free_folio may block ====================== ======================== ========= =============== -ops PageLocked(page) i_rwsem invalidate_lock +ops folio locked i_rwsem invalidate_lock ====================== ======================== ========= =============== writepage: yes, unlocks (see below) -readpage: yes, unlocks shared +read_folio: yes, unlocks shared writepages: -dirty_folio maybe +dirty_folio: maybe readahead: yes, unlocks shared write_begin: locks the page exclusive write_end: yes, unlocks exclusive bmap: invalidate_folio: yes exclusive -releasepage: yes -freepage: yes +release_folio: yes +free_folio: yes direct_IO: isolate_page: yes migratepage: yes (both) @@ -287,15 +288,16 @@ is_partially_uptodate: yes error_remove_page: yes swap_activate: no swap_deactivate: no +swap_rw: yes, unlocks ====================== ======================== ========= =============== -->write_begin(), ->write_end() and ->readpage() may be called from +->write_begin(), ->write_end() and ->read_folio() may be called from the request handler (/dev/loop). -->readpage() unlocks the page, either synchronously or via I/O +->read_folio() unlocks the folio, either synchronously or via I/O completion. -->readahead() unlocks the pages that I/O is attempted on like ->readpage(). +->readahead() unlocks the folios that I/O is attempted on like ->read_folio(). ->writepage() is used for two purposes: for "memory cleansing" and for "sync". These are quite different operations and the behaviour may differ @@ -372,12 +374,12 @@ invalidate_lock before invalidating page cache in truncate / hole punch path (and thus calling into ->invalidate_folio) to block races between page cache invalidation and page cache filling functions (fault, read, ...). -->releasepage() is called when the kernel is about to try to drop the -buffers from the page in preparation for freeing it. It returns zero to -indicate that the buffers are (or may be) freeable. If ->releasepage is zero, -the kernel assumes that the fs has no private interest in the buffers. +->release_folio() is called when the kernel is about to try to drop the +buffers from the folio in preparation for freeing it. It returns false to +indicate that the buffers are (or may be) freeable. If ->release_folio is +NULL, the kernel assumes that the fs has no private interest in the buffers. -->freepage() is called when the kernel is done dropping the page +->free_folio() is called when the kernel has dropped the folio from the page cache. ->launder_folio() may be called prior to releasing a folio if @@ -386,15 +388,19 @@ cleaned, or an error value if not. Note that in order to prevent the folio getting mapped back in and redirtied, it needs to be kept locked across the entire operation. -->swap_activate will be called with a non-zero argument on -files backing (non block device backed) swapfiles. A return value -of zero indicates success, in which case this file can be used for -backing swapspace. The swapspace operations will be proxied to the -address space operations. +->swap_activate() will be called to prepare the given file for swap. It +should perform any validation and preparation necessary to ensure that +writes can be performed with minimal memory allocation. It should call +add_swap_extent(), or the helper iomap_swapfile_activate(), and return +the number of extents added. If IO should be submitted through +->swap_rw(), it should set SWP_FS_OPS, otherwise IO will be submitted +directly to the block device ``sis->bdev``. ->swap_deactivate() will be called in the sys_swapoff() path after ->swap_activate() returned success. +->swap_rw will be called for swap IO if SWP_FS_OPS was set by ->swap_activate(). + file_lock_operations ==================== @@ -428,6 +434,8 @@ prototypes:: void (*lm_break)(struct file_lock *); /* break_lease callback */ int (*lm_change)(struct file_lock **, int); bool (*lm_breaker_owns_lease)(struct file_lock *); + bool (*lm_lock_expirable)(struct file_lock *); + void (*lm_expire_lock)(void); locking rules: @@ -439,6 +447,8 @@ lm_grant: no no no lm_break: yes no no lm_change yes no no lm_breaker_owns_lease: yes no no +lm_lock_expirable yes no no +lm_expire_lock no no yes ====================== ============= ================= ========= buffer_head diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst index 69f00179fdfe..a80a59941d2f 100644 --- a/Documentation/filesystems/netfs_library.rst +++ b/Documentation/filesystems/netfs_library.rst @@ -96,7 +96,7 @@ attached to an inode (or NULL if fscache is disabled):: Buffered Read Helpers ===================== -The library provides a set of read helpers that handle the ->readpage(), +The library provides a set of read helpers that handle the ->read_folio(), ->readahead() and much of the ->write_begin() VM operations and translate them into a common call framework. @@ -136,20 +136,19 @@ Read Helper Functions Three read helpers are provided:: void netfs_readahead(struct readahead_control *ractl); - int netfs_readpage(struct file *file, - struct page *page); + int netfs_read_folio(struct file *file, + struct folio *folio); int netfs_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned int len, - unsigned int flags, struct folio **_folio, void **_fsdata); Each corresponds to a VM address space operation. These operations use the state in the per-inode context. -For ->readahead() and ->readpage(), the network filesystem just point directly +For ->readahead() and ->read_folio(), the network filesystem just point directly at the corresponding read helper; whereas for ->write_begin(), it may be a little more complicated as the network filesystem might want to flush conflicting writes or track dirty data and needs to put the acquired folio if diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst index 7c1583dbeb59..2e0e4f0e0c6f 100644 --- a/Documentation/filesystems/porting.rst +++ b/Documentation/filesystems/porting.rst @@ -624,7 +624,7 @@ any symlink that might use page_follow_link_light/page_put_link() must have inode_nohighmem(inode) called before anything might start playing with its pagecache. No highmem pages should end up in the pagecache of such symlinks. That includes any preseeding that might be done during symlink -creation. __page_symlink() will honour the mapping gfp flags, so once +creation. page_symlink() will honour the mapping gfp flags, so once you've done inode_nohighmem() it's safe to use, but if you allocate and insert the page manually, make sure to use the right gfp flags. diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 6a0dd99786f9..1bc91fb8c321 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -942,56 +942,73 @@ can be substantial. In many cases there are other means to find out additional memory using subsystem specific interfaces, for instance /proc/net/sockstat for TCP memory allocations. -The following is from a 16GB PIII, which has highmem enabled. -You may not have all of these fields. +Example output. You may not have all of these fields. :: > cat /proc/meminfo - MemTotal: 16344972 kB - MemFree: 13634064 kB - MemAvailable: 14836172 kB - Buffers: 3656 kB - Cached: 1195708 kB - SwapCached: 0 kB - Active: 891636 kB - Inactive: 1077224 kB - HighTotal: 15597528 kB - HighFree: 13629632 kB - LowTotal: 747444 kB - LowFree: 4432 kB - SwapTotal: 0 kB - SwapFree: 0 kB - Dirty: 968 kB - Writeback: 0 kB - AnonPages: 861800 kB - Mapped: 280372 kB - Shmem: 644 kB - KReclaimable: 168048 kB - Slab: 284364 kB - SReclaimable: 159856 kB - SUnreclaim: 124508 kB - PageTables: 24448 kB - NFS_Unstable: 0 kB - Bounce: 0 kB - WritebackTmp: 0 kB - CommitLimit: 7669796 kB - Committed_AS: 100056 kB - VmallocTotal: 112216 kB - VmallocUsed: 428 kB - VmallocChunk: 111088 kB - Percpu: 62080 kB - HardwareCorrupted: 0 kB - AnonHugePages: 49152 kB - ShmemHugePages: 0 kB - ShmemPmdMapped: 0 kB + MemTotal: 32858820 kB + MemFree: 21001236 kB + MemAvailable: 27214312 kB + Buffers: 581092 kB + Cached: 5587612 kB + SwapCached: 0 kB + Active: 3237152 kB + Inactive: 7586256 kB + Active(anon): 94064 kB + Inactive(anon): 4570616 kB + Active(file): 3143088 kB + Inactive(file): 3015640 kB + Unevictable: 0 kB + Mlocked: 0 kB + SwapTotal: 0 kB + SwapFree: 0 kB + Zswap: 1904 kB + Zswapped: 7792 kB + Dirty: 12 kB + Writeback: 0 kB + AnonPages: 4654780 kB + Mapped: 266244 kB + Shmem: 9976 kB + KReclaimable: 517708 kB + Slab: 660044 kB + SReclaimable: 517708 kB + SUnreclaim: 142336 kB + KernelStack: 11168 kB + PageTables: 20540 kB + NFS_Unstable: 0 kB + Bounce: 0 kB + WritebackTmp: 0 kB + CommitLimit: 16429408 kB + Committed_AS: 7715148 kB + VmallocTotal: 34359738367 kB + VmallocUsed: 40444 kB + VmallocChunk: 0 kB + Percpu: 29312 kB + HardwareCorrupted: 0 kB + AnonHugePages: 4149248 kB + ShmemHugePages: 0 kB + ShmemPmdMapped: 0 kB + FileHugePages: 0 kB + FilePmdMapped: 0 kB + CmaTotal: 0 kB + CmaFree: 0 kB + HugePages_Total: 0 + HugePages_Free: 0 + HugePages_Rsvd: 0 + HugePages_Surp: 0 + Hugepagesize: 2048 kB + Hugetlb: 0 kB + DirectMap4k: 401152 kB + DirectMap2M: 10008576 kB + DirectMap1G: 24117248 kB MemTotal Total usable RAM (i.e. physical RAM minus a few reserved bits and the kernel binary code) MemFree - The sum of LowFree+HighFree + Total free RAM. On highmem systems, the sum of LowFree+HighFree MemAvailable An estimate of how much memory is available for starting new applications, without swapping. Calculated from MemFree, @@ -1005,8 +1022,9 @@ Buffers Relatively temporary storage for raw disk blocks shouldn't get tremendously large (20MB or so) Cached - in-memory cache for files read from the disk (the - pagecache). Doesn't include SwapCached + In-memory cache for files read from the disk (the + pagecache) as well as tmpfs & shmem. + Doesn't include SwapCached. SwapCached Memory that once was swapped out, is swapped back in but still also is in the swapfile (if memory is needed it @@ -1018,6 +1036,11 @@ Active Inactive Memory which has been less recently used. It is more eligible to be reclaimed for other purposes +Unevictable + Memory allocated for userspace which cannot be reclaimed, such + as mlocked pages, ramfs backing pages, secret memfd pages etc. +Mlocked + Memory locked with mlock(). HighTotal, HighFree Highmem is all memory above ~860MB of physical memory. Highmem areas are for use by userspace programs, or @@ -1034,26 +1057,20 @@ SwapTotal SwapFree Memory which has been evicted from RAM, and is temporarily on the disk +Zswap + Memory consumed by the zswap backend (compressed size) +Zswapped + Amount of anonymous memory stored in zswap (original size) Dirty Memory which is waiting to get written back to the disk Writeback Memory which is actively being written back to the disk AnonPages Non-file backed pages mapped into userspace page tables -HardwareCorrupted - The amount of RAM/memory in KB, the kernel identifies as - corrupted. -AnonHugePages - Non-file backed huge pages mapped into userspace page tables Mapped files which have been mmaped, such as libraries Shmem Total memory used by shared memory (shmem) and tmpfs -ShmemHugePages - Memory used by shared memory (shmem) and tmpfs allocated - with huge pages -ShmemPmdMapped - Shared memory mapped into userspace with huge pages KReclaimable Kernel allocations that the kernel will attempt to reclaim under memory pressure. Includes SReclaimable (below), and other @@ -1064,9 +1081,10 @@ SReclaimable Part of Slab, that might be reclaimed, such as caches SUnreclaim Part of Slab, that cannot be reclaimed on memory pressure +KernelStack + Memory consumed by the kernel stacks of all tasks PageTables - amount of memory dedicated to the lowest level of page - tables. + Memory consumed by userspace page tables NFS_Unstable Always zero. Previous counted pages which had been written to the server, but has not been committed to stable storage. @@ -1098,7 +1116,7 @@ Committed_AS has been allocated by processes, even if it has not been "used" by them as of yet. A process which malloc()'s 1G of memory, but only touches 300M of it will show up as - using 1G. This 1G is memory which has been "committed" to + using 1G. This 1G is memory which has been "committed" to by the VM and can be used at any time by the allocating application. With strict overcommit enabled on the system (mode 2 in 'vm.overcommit_memory'), allocations which would @@ -1107,7 +1125,7 @@ Committed_AS not fail due to lack of memory once that memory has been successfully allocated. VmallocTotal - total size of vmalloc memory area + total size of vmalloc virtual address space VmallocUsed amount of vmalloc area which is used VmallocChunk @@ -1115,6 +1133,30 @@ VmallocChunk Percpu Memory allocated to the percpu allocator used to back percpu allocations. This stat excludes the cost of metadata. +HardwareCorrupted + The amount of RAM/memory in KB, the kernel identifies as + corrupted. +AnonHugePages + Non-file backed huge pages mapped into userspace page tables +ShmemHugePages + Memory used by shared memory (shmem) and tmpfs allocated + with huge pages +ShmemPmdMapped + Shared memory mapped into userspace with huge pages +FileHugePages + Memory used for filesystem data (page cache) allocated + with huge pages +FilePmdMapped + Page cache mapped into userspace with huge pages +CmaTotal + Memory reserved for the Contiguous Memory Allocator (CMA) +CmaFree + Free remaining memory in the CMA reserves +HugePages_Total, HugePages_Free, HugePages_Rsvd, HugePages_Surp, Hugepagesize, Hugetlb + See Documentation/admin-guide/mm/hugetlbpage.rst. +DirectMap4k, DirectMap2M, DirectMap1G + Breakdown of page table sizes used in the kernel's + identity mapping of RAM vmallocinfo ~~~~~~~~~~~ diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst index 794bd1a66bfb..08069ecd49a6 100644 --- a/Documentation/filesystems/vfs.rst +++ b/Documentation/filesystems/vfs.rst @@ -620,9 +620,9 @@ Writeback. The first can be used independently to the others. The VM can try to either write dirty pages in order to clean them, or release clean pages in order to reuse them. To do this it can call the ->writepage method -on dirty pages, and ->releasepage on clean pages with PagePrivate set. -Clean pages without PagePrivate and with no external references will be -released without notice being given to the address_space. +on dirty pages, and ->release_folio on clean folios with the private +flag set. Clean pages without PagePrivate and with no external references +will be released without notice being given to the address_space. To achieve this functionality, pages need to be placed on an LRU with lru_cache_add and mark_page_active needs to be called whenever the page @@ -656,7 +656,7 @@ by memory-mapping the page. Data is written into the address space by the application, and then written-back to storage typically in whole pages, however the address_space has finer control of write sizes. -The read process essentially only requires 'readpage'. The write +The read process essentially only requires 'read_folio'. The write process is more complicated and uses write_begin/write_end or dirty_folio to write data into the address_space, and writepage and writepages to writeback data to storage. @@ -722,20 +722,20 @@ cache in your filesystem. The following members are defined: struct address_space_operations { int (*writepage)(struct page *page, struct writeback_control *wbc); - int (*readpage)(struct file *, struct page *); + int (*read_folio)(struct file *, struct folio *); int (*writepages)(struct address_space *, struct writeback_control *); bool (*dirty_folio)(struct address_space *, struct folio *); void (*readahead)(struct readahead_control *); int (*write_begin)(struct file *, struct address_space *mapping, - loff_t pos, unsigned len, unsigned flags, + loff_t pos, unsigned len, struct page **pagep, void **fsdata); int (*write_end)(struct file *, struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, struct page *page, void *fsdata); sector_t (*bmap)(struct address_space *, sector_t); void (*invalidate_folio) (struct folio *, size_t start, size_t len); - int (*releasepage) (struct page *, int); - void (*freepage)(struct page *); + bool (*release_folio)(struct folio *, gfp_t); + void (*free_folio)(struct folio *); ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter); /* isolate a page for migration */ bool (*isolate_page) (struct page *, isolate_mode_t); @@ -747,10 +747,11 @@ cache in your filesystem. The following members are defined: bool (*is_partially_uptodate) (struct folio *, size_t from, size_t count); - void (*is_dirty_writeback) (struct page *, bool *, bool *); + void (*is_dirty_writeback)(struct folio *, bool *, bool *); int (*error_remove_page) (struct mapping *mapping, struct page *page); - int (*swap_activate)(struct file *); + int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span) int (*swap_deactivate)(struct file *); + int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter); }; ``writepage`` @@ -772,14 +773,14 @@ cache in your filesystem. The following members are defined: See the file "Locking" for more details. -``readpage`` - called by the VM to read a page from backing store. The page - will be Locked when readpage is called, and should be unlocked - and marked uptodate once the read completes. If ->readpage - discovers that it needs to unlock the page for some reason, it - can do so, and then return AOP_TRUNCATED_PAGE. In this case, - the page will be relocated, relocked and if that all succeeds, - ->readpage will be called again. +``read_folio`` + called by the VM to read a folio from backing store. The folio + will be locked when read_folio is called, and should be unlocked + and marked uptodate once the read completes. If ->read_folio + discovers that it cannot perform the I/O at this time, it can + unlock the folio and return AOP_TRUNCATED_PAGE. In this case, + the folio will be looked up again, relocked and if that all succeeds, + ->read_folio will be called again. ``writepages`` called by the VM to write out pages associated with the @@ -832,9 +833,6 @@ cache in your filesystem. The following members are defined: passed to write_begin is greater than the number of bytes copied into the page). - flags is a field for AOP_FLAG_xxx flags, described in - include/linux/fs.h. - A void * may be returned in fsdata, which then gets passed into write_end. @@ -867,36 +865,35 @@ cache in your filesystem. The following members are defined: address space. This generally corresponds to either a truncation, punch hole or a complete invalidation of the address space (in the latter case 'offset' will always be 0 and 'length' - will be folio_size()). Any private data associated with the page + will be folio_size()). Any private data associated with the folio should be updated to reflect this truncation. If offset is 0 and length is folio_size(), then the private data should be - released, because the page must be able to be completely - discarded. This may be done by calling the ->releasepage + released, because the folio must be able to be completely + discarded. This may be done by calling the ->release_folio function, but in this case the release MUST succeed. -``releasepage`` - releasepage is called on PagePrivate pages to indicate that the - page should be freed if possible. ->releasepage should remove - any private data from the page and clear the PagePrivate flag. - If releasepage() fails for some reason, it must indicate failure - with a 0 return value. releasepage() is used in two distinct - though related cases. The first is when the VM finds a clean - page with no active users and wants to make it a free page. If - ->releasepage succeeds, the page will be removed from the - address_space and become free. +``release_folio`` + release_folio is called on folios with private data to tell the + filesystem that the folio is about to be freed. ->release_folio + should remove any private data from the folio and clear the + private flag. If release_folio() fails, it should return false. + release_folio() is used in two distinct though related cases. + The first is when the VM wants to free a clean folio with no + active users. If ->release_folio succeeds, the folio will be + removed from the address_space and be freed. The second case is when a request has been made to invalidate - some or all pages in an address_space. This can happen through - the fadvise(POSIX_FADV_DONTNEED) system call or by the - filesystem explicitly requesting it as nfs and 9fs do (when they + some or all folios in an address_space. This can happen + through the fadvise(POSIX_FADV_DONTNEED) system call or by the + filesystem explicitly requesting it as nfs and 9p do (when they believe the cache may be out of date with storage) by calling invalidate_inode_pages2(). If the filesystem makes such a call, - and needs to be certain that all pages are invalidated, then its - releasepage will need to ensure this. Possibly it can clear the - PageUptodate bit if it cannot free private data yet. + and needs to be certain that all folios are invalidated, then + its release_folio will need to ensure this. Possibly it can + clear the uptodate flag if it cannot free private data yet. -``freepage`` - freepage is called once the page is no longer visible in the +``free_folio`` + free_folio is called once the folio is no longer visible in the page cache in order to allow the cleanup of any private data. Since it may be called by the memory reclaimer, it should not assume that the original address_space mapping still exists, and @@ -935,14 +932,14 @@ cache in your filesystem. The following members are defined: without needing I/O to bring the whole page up to date. ``is_dirty_writeback`` - Called by the VM when attempting to reclaim a page. The VM uses + Called by the VM when attempting to reclaim a folio. The VM uses dirty and writeback information to determine if it needs to stall to allow flushers a chance to complete some IO. - Ordinarily it can use PageDirty and PageWriteback but some - filesystems have more complex state (unstable pages in NFS + Ordinarily it can use folio_test_dirty and folio_test_writeback but + some filesystems have more complex state (unstable folios in NFS prevent reclaim) or do not set those flags due to locking problems. This callback allows a filesystem to indicate to the - VM if a page should be treated as dirty or writeback for the + VM if a folio should be treated as dirty or writeback for the purposes of stalling. ``error_remove_page`` @@ -952,15 +949,21 @@ cache in your filesystem. The following members are defined: unless you have them locked or reference counts increased. ``swap_activate`` - Called when swapon is used on a file to allocate space if - necessary and pin the block lookup information in memory. A - return value of zero indicates success, in which case this file - can be used to back swapspace. + + Called to prepare the given file for swap. It should perform + any validation and preparation necessary to ensure that writes + can be performed with minimal memory allocation. It should call + add_swap_extent(), or the helper iomap_swapfile_activate(), and + return the number of extents added. If IO should be submitted + through ->swap_rw(), it should set SWP_FS_OPS, otherwise IO will + be submitted directly to the block device ``sis->bdev``. ``swap_deactivate`` Called during swapoff on files where swap_activate was successful. +``swap_rw`` + Called to read or write swap pages when SWP_FS_OPS is set. The File Object =============== diff --git a/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst b/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst new file mode 100644 index 000000000000..f37fc90ce340 --- /dev/null +++ b/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst @@ -0,0 +1,363 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +Chrome OS ACPI Device +===================== + +Hardware functionality specific to Chrome OS is exposed through a Chrome OS ACPI device. +The plug and play ID of a Chrome OS ACPI device is GGL0001. GGL is a valid PNP ID of Google. +PNP ID can be used with the ACPI devices according to the guidelines. The following ACPI +objects are supported: + +.. flat-table:: Supported ACPI Objects + :widths: 1 2 + :header-rows: 1 + + * - Object + - Description + + * - CHSW + - Chrome OS switch positions + + * - HWID + - Chrome OS hardware ID + + * - FWID + - Chrome OS firmware version + + * - FRID + - Chrome OS read-only firmware version + + * - BINF + - Chrome OS boot information + + * - GPIO + - Chrome OS GPIO assignments + + * - VBNV + - Chrome OS NVRAM locations + + * - VDTA + - Chrome OS verified boot data + + * - FMAP + - Chrome OS flashmap base address + + * - MLST + - Chrome OS method list + +CHSW (Chrome OS switch positions) +================================= +This control method returns the switch positions for Chrome OS specific hardware switches. + +Arguments: +---------- +None + +Result code: +------------ +An integer containing the switch positions as bitfields: + +.. flat-table:: + :widths: 1 2 + + * - 0x00000002 + - Recovery button was pressed when x86 firmware booted. + + * - 0x00000004 + - Recovery button was pressed when EC firmware booted. (required if EC EEPROM is + rewritable; otherwise optional) + + * - 0x00000020 + - Developer switch was enabled when x86 firmware booted. + + * - 0x00000200 + - Firmware write protection was disabled when x86 firmware booted. (required if + firmware write protection is controlled through x86 BIOS; otherwise optional) + +All other bits are reserved and should be set to 0. + +HWID (Chrome OS hardware ID) +============================ +This control method returns the hardware ID for the Chromebook. + +Arguments: +---------- +None + +Result code: +------------ +A null-terminated ASCII string containing the hardware ID from the Model-Specific Data area of +EEPROM. + +Note that the hardware ID can be up to 256 characters long, including the terminating null. + +FWID (Chrome OS firmware version) +================================= +This control method returns the firmware version for the rewritable portion of the main +processor firmware. + +Arguments: +---------- +None + +Result code: +------------ +A null-terminated ASCII string containing the complete firmware version for the rewritable +portion of the main processor firmware. + +FRID (Chrome OS read-only firmware version) +=========================================== +This control method returns the firmware version for the read-only portion of the main +processor firmware. + +Arguments: +---------- +None + +Result code: +------------ +A null-terminated ASCII string containing the complete firmware version for the read-only +(bootstrap + recovery ) portion of the main processor firmware. + +BINF (Chrome OS boot information) +================================= +This control method returns information about the current boot. + +Arguments: +---------- +None + +Result code: +------------ + +.. code-block:: + + Package { + Reserved1 + Reserved2 + Active EC Firmware + Active Main Firmware Type + Reserved5 + } + +.. flat-table:: + :widths: 1 1 2 + :header-rows: 1 + + * - Field + - Format + - Description + + * - Reserved1 + - DWORD + - Set to 256 (0x100). This indicates this field is no longer used. + + * - Reserved2 + - DWORD + - Set to 256 (0x100). This indicates this field is no longer used. + + * - Active EC firmware + - DWORD + - The EC firmware which was used during boot. + + - 0 - Read-only (recovery) firmware + - 1 - Rewritable firmware. + + Set to 0 if EC firmware is always read-only. + + * - Active Main Firmware Type + - DWORD + - The main firmware type which was used during boot. + + - 0 - Recovery + - 1 - Normal + - 2 - Developer + - 3 - netboot (factory installation only) + + Other values are reserved. + + * - Reserved5 + - DWORD + - Set to 256 (0x100). This indicates this field is no longer used. + +GPIO (Chrome OS GPIO assignments) +================================= +This control method returns information about Chrome OS specific GPIO assignments for +Chrome OS hardware, so the kernel can directly control that hardware. + +Arguments: +---------- +None + +Result code: +------------ +.. code-block:: + + Package { + Package { + // First GPIO assignment + Signal Type //DWORD + Attributes //DWORD + Controller Offset //DWORD + Controller Name //ASCIIZ + }, + ... + Package { + // Last GPIO assignment + Signal Type //DWORD + Attributes //DWORD + Controller Offset //DWORD + Controller Name //ASCIIZ + } + } + +Where ASCIIZ means a null-terminated ASCII string. + +.. flat-table:: + :widths: 1 1 2 + :header-rows: 1 + + * - Field + - Format + - Description + + * - Signal Type + - DWORD + - Type of GPIO signal + + - 0x00000001 - Recovery button + - 0x00000002 - Developer mode switch + - 0x00000003 - Firmware write protection switch + - 0x00000100 - Debug header GPIO 0 + - ... + - 0x000001FF - Debug header GPIO 255 + + Other values are reserved. + + * - Attributes + - DWORD + - Signal attributes as bitfields: + + - 0x00000001 - Signal is active-high (for button, a GPIO value + of 1 means the button is pressed; for switches, a GPIO value + of 1 means the switch is enabled). If this bit is 0, the signal + is active low. Set to 0 for debug header GPIOs. + + * - Controller Offset + - DWORD + - GPIO number on the specified controller. + + * - Controller Name + - ASCIIZ + - Name of the controller for the GPIO. + Currently supported names: + "NM10" - Intel NM10 chip + +VBNV (Chrome OS NVRAM locations) +================================ +This control method returns information about the NVRAM (CMOS) locations used to +communicate with the BIOS. + +Arguments: +---------- +None + +Result code: +------------ +.. code-block:: + + Package { + NV Storage Block Offset //DWORD + NV Storage Block Size //DWORD + } + +.. flat-table:: + :widths: 1 1 2 + :header-rows: 1 + + * - Field + - Format + - Description + + * - NV Storage Block Offset + - DWORD + - Offset in CMOS bank 0 of the verified boot non-volatile storage block, counting from + the first writable CMOS byte (that is, offset=0 is the byte following the 14 bytes of + clock data). + + * - NV Storage Block Size + - DWORD + - Size in bytes of the verified boot non-volatile storage block. + +FMAP (Chrome OS flashmap address) +================================= +This control method returns the physical memory address of the start of the main processor +firmware flashmap. + +Arguments: +---------- +None + +NoneResult code: +---------------- +A DWORD containing the physical memory address of the start of the main processor firmware +flashmap. + +VDTA (Chrome OS verified boot data) +=================================== +This control method returns the verified boot data block shared between the firmware +verification step and the kernel verification step. + +Arguments: +---------- +None + +Result code: +------------ +A buffer containing the verified boot data block. + +MECK (Management Engine Checksum) +================================= +This control method returns the SHA-1 or SHA-256 hash that is read out of the Management +Engine extended registers during boot. The hash is exported via ACPI so the OS can verify that +the ME firmware has not changed. If Management Engine is not present, or if the firmware was +unable to read the extended registers, this buffer can be zero. + +Arguments: +---------- +None + +Result code: +------------ +A buffer containing the ME hash. + +MLST (Chrome OS method list) +============================ +This control method returns a list of the other control methods supported by the Chrome OS +hardware device. + +Arguments: +---------- +None + +Result code: +------------ +A package containing a list of null-terminated ASCII strings, one for each control method +supported by the Chrome OS hardware device, not including the MLST method itself. +For this version of the specification, the result is: + +.. code-block:: + + Package { + "CHSW", + "FWID", + "HWID", + "FRID", + "BINF", + "GPIO", + "VBNV", + "FMAP", + "VDTA", + "MECK" + } diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst index b053b0c3d696..b6a42f4ffe03 100644 --- a/Documentation/firmware-guide/acpi/index.rst +++ b/Documentation/firmware-guide/acpi/index.rst @@ -29,3 +29,4 @@ ACPI Support non-d0-probe extcon-intel-int3496 intel-pmc-mux + chromeos-acpi-device diff --git a/Documentation/gpu/amdgpu/amdgpu-glossary.rst b/Documentation/gpu/amdgpu/amdgpu-glossary.rst index 859dcec6c6f9..db924d37f93e 100644 --- a/Documentation/gpu/amdgpu/amdgpu-glossary.rst +++ b/Documentation/gpu/amdgpu/amdgpu-glossary.rst @@ -8,12 +8,19 @@ we have a dedicated glossary for Display Core at .. glossary:: + active_cu_number + The number of CUs that are active on the system. The number of active + CUs may be less than SE * SH * CU depending on the board configuration. + CP Command Processor CPLIB Content Protection Library + CU + Compute Unit + DFS Digital Frequency Synthesizer @@ -74,6 +81,12 @@ we have a dedicated glossary for Display Core at SDMA System DMA + SE + Shader Engine + + SH + SHader array + SMU System Management Unit diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index c3ce91eecbc1..2d473bc64c9f 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -226,40 +226,43 @@ Panel Self Refresh Helper Reference HDCP Helper Functions Reference =============================== -.. kernel-doc:: drivers/gpu/drm/drm_hdcp.c +.. kernel-doc:: drivers/gpu/drm/display/drm_hdcp_helper.c :export: Display Port Helper Functions Reference ======================================= -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_helper.c :doc: dp helpers -.. kernel-doc:: include/drm/dp/drm_dp_helper.h +.. kernel-doc:: include/drm/display/drm_dp.h :internal: -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp.c +.. kernel-doc:: include/drm/display/drm_dp_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_helper.c :export: Display Port CEC Helper Functions Reference =========================================== -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_cec.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_cec.c :doc: dp cec helpers -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_cec.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_cec.c :export: Display Port Dual Mode Adaptor Helper Functions Reference ========================================================= -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_dual_mode_helper.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_dual_mode_helper.c :doc: dp dual mode helpers -.. kernel-doc:: include/drm/dp/drm_dp_dual_mode_helper.h +.. kernel-doc:: include/drm/display/drm_dp_dual_mode_helper.h :internal: -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_dual_mode_helper.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_dual_mode_helper.c :export: Display Port MST Helpers @@ -268,19 +271,19 @@ Display Port MST Helpers Overview -------- -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_mst_topology.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_mst_topology.c :doc: dp mst helper -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_mst_topology.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_mst_topology.c :doc: Branch device and port refcounting Functions Reference ------------------- -.. kernel-doc:: include/drm/dp/drm_dp_mst_helper.h +.. kernel-doc:: include/drm/display/drm_dp_mst_helper.h :internal: -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_mst_topology.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_mst_topology.c :export: Topology Lifetime Internals @@ -289,7 +292,7 @@ Topology Lifetime Internals These functions aren't exported to drivers, but are documented here to help make the MST topology helpers easier to understand -.. kernel-doc:: drivers/gpu/drm/dp/drm_dp_mst_topology.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dp_mst_topology.c :functions: drm_dp_mst_topology_try_get_mstb drm_dp_mst_topology_get_mstb drm_dp_mst_topology_put_mstb drm_dp_mst_topology_try_get_port drm_dp_mst_topology_get_port @@ -323,13 +326,13 @@ MIPI DSI Helper Functions Reference Display Stream Compression Helper Functions Reference ===================================================== -.. kernel-doc:: drivers/gpu/drm/drm_dsc.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dsc_helper.c :doc: dsc helpers -.. kernel-doc:: include/drm/drm_dsc.h +.. kernel-doc:: include/drm/display/drm_dsc.h :internal: -.. kernel-doc:: drivers/gpu/drm/drm_dsc.c +.. kernel-doc:: drivers/gpu/drm/display/drm_dsc_helper.c :export: Output Probing Helper Functions Reference @@ -353,13 +356,13 @@ EDID Helper Functions Reference SCDC Helper Functions Reference =============================== -.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c +.. kernel-doc:: drivers/gpu/drm/display/drm_scdc_helper.c :doc: scdc helpers -.. kernel-doc:: include/drm/drm_scdc_helper.h +.. kernel-doc:: include/drm/display/drm_scdc_helper.h :internal: -.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c +.. kernel-doc:: drivers/gpu/drm/display/drm_scdc_helper.c :export: HDMI Infoframes Helper Reference diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 198bcc1affa1..f32ccce5722d 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -466,6 +466,15 @@ DRM MM Range Allocator Function References .. kernel-doc:: drivers/gpu/drm/drm_mm.c :export: +DRM Buddy Allocator +=================== + +DRM Buddy Function References +----------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_buddy.c + :export: + DRM Cache Handling and Fast WC memcpy() ======================================= diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 199afb503ab1..ce47b4292481 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -148,7 +148,9 @@ clients together with the legacy drmAuth authentication procedure. If a driver advertises render node support, DRM core will create a separate render node called renderD<num>. There will be one render node per device. No ioctls except PRIME-related ioctls will be allowed on -this node. Especially GEM_OPEN will be explicitly prohibited. Render +this node. Especially GEM_OPEN will be explicitly prohibited. For a +complete list of driver-independent ioctls that can be used on render +nodes, see the ioctls marked DRM_RENDER_ALLOW in drm_ioctl.c Render nodes are designed to avoid the buffer-leaks, which occur if clients guess the flink names or mmap offsets on the legacy interface. Additionally to this basic interface, drivers must mark their diff --git a/Documentation/gpu/drm-usage-stats.rst b/Documentation/gpu/drm-usage-stats.rst new file mode 100644 index 000000000000..6c9f166a8d6f --- /dev/null +++ b/Documentation/gpu/drm-usage-stats.rst @@ -0,0 +1,112 @@ +.. _drm-client-usage-stats: + +====================== +DRM client usage stats +====================== + +DRM drivers can choose to export partly standardised text output via the +`fops->show_fdinfo()` as part of the driver specific file operations registered +in the `struct drm_driver` object registered with the DRM core. + +One purpose of this output is to enable writing as generic as practicaly +feasible `top(1)` like userspace monitoring tools. + +Given the differences between various DRM drivers the specification of the +output is split between common and driver specific parts. Having said that, +wherever possible effort should still be made to standardise as much as +possible. + +File format specification +========================= + +- File shall contain one key value pair per one line of text. +- Colon character (`:`) must be used to delimit keys and values. +- All keys shall be prefixed with `drm-`. +- Whitespace between the delimiter and first non-whitespace character shall be + ignored when parsing. +- Neither keys or values are allowed to contain whitespace characters. +- Numerical key value pairs can end with optional unit string. +- Data type of the value is fixed as defined in the specification. + +Key types +--------- + +1. Mandatory, fully standardised. +2. Optional, fully standardised. +3. Driver specific. + +Data types +---------- + +- <uint> - Unsigned integer without defining the maximum value. +- <str> - String excluding any above defined reserved characters or whitespace. + +Mandatory fully standardised keys +--------------------------------- + +- drm-driver: <str> + +String shall contain the name this driver registered as via the respective +`struct drm_driver` data structure. + +Optional fully standardised keys +-------------------------------- + +- drm-pdev: <aaaa:bb.cc.d> + +For PCI devices this should contain the PCI slot address of the device in +question. + +- drm-client-id: <uint> + +Unique value relating to the open DRM file descriptor used to distinguish +duplicated and shared file descriptors. Conceptually the value should map 1:1 +to the in kernel representation of `struct drm_file` instances. + +Uniqueness of the value shall be either globally unique, or unique within the +scope of each device, in which case `drm-pdev` shall be present as well. + +Userspace should make sure to not double account any usage statistics by using +the above described criteria in order to associate data to individual clients. + +- drm-engine-<str>: <uint> ns + +GPUs usually contain multiple execution engines. Each shall be given a stable +and unique name (str), with possible values documented in the driver specific +documentation. + +Value shall be in specified time units which the respective GPU engine spent +busy executing workloads belonging to this client. + +Values are not required to be constantly monotonic if it makes the driver +implementation easier, but are required to catch up with the previously reported +larger value within a reasonable period. Upon observing a value lower than what +was previously read, userspace is expected to stay with that larger previous +value until a monotonic update is seen. + +- drm-engine-capacity-<str>: <uint> + +Engine identifier string must be the same as the one specified in the +drm-engine-<str> tag and shall contain a greater than zero number in case the +exported engine corresponds to a group of identical hardware engines. + +In the absence of this tag parser shall assume capacity of one. Zero capacity +is not allowed. + +- drm-memory-<str>: <uint> [KiB|MiB] + +Each possible memory type which can be used to store buffer objects by the +GPU in question shall be given a stable and unique name to be returned as the +string here. + +Value shall reflect the amount of storage currently consumed by the buffer +object belong to this client, in the respective memory region. + +Default unit shall be bytes with optional unit specifiers of 'KiB' or 'MiB' +indicating kibi- or mebi-bytes. + +=============================== +Driver specific implementations +=============================== + +:ref:`i915-usage-stats` diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index bcaefc952764..54060cd6c419 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -187,19 +187,7 @@ Display Refresh Rate Switching (DRRS) :doc: Display Refresh Rate Switching (DRRS) .. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c - :functions: intel_drrs_enable - -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c - :functions: intel_drrs_disable - -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c - :functions: intel_drrs_invalidate - -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c - :functions: intel_drrs_flush - -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c - :functions: intel_drrs_init + :internal: DPIO ---- @@ -709,3 +697,31 @@ The style guide for ``i915_reg.h``. .. kernel-doc:: drivers/gpu/drm/i915/i915_reg.h :doc: The i915 register macro definition style guide + +.. _i915-usage-stats: + +i915 DRM client usage stats implementation +========================================== + +The drm/i915 driver implements the DRM client usage stats specification as +documented in :ref:`drm-client-usage-stats`. + +Example of the output showing the implemented key value pairs and entirety of +the currently possible format options: + +:: + + pos: 0 + flags: 0100002 + mnt_id: 21 + drm-driver: i915 + drm-pdev: 0000:00:02.0 + drm-client-id: 7 + drm-engine-render: 9288864723 ns + drm-engine-copy: 2035071108 ns + drm-engine-video: 0 ns + drm-engine-capacity-video: 2 + drm-engine-video-enhance: 0 ns + +Possible `drm-engine-` key names are: `render`, `copy`, `video` and +`video-enhance`. diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index b9c1214d8f23..b99dede9a5b1 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -10,6 +10,7 @@ Linux GPU Driver Developer's Guide drm-kms drm-kms-helpers drm-uapi + drm-usage-stats driver-uapi drm-client drivers diff --git a/Documentation/gpu/introduction.rst b/Documentation/gpu/introduction.rst index 25a56e9c0cfd..f05eccd2c07c 100644 --- a/Documentation/gpu/introduction.rst +++ b/Documentation/gpu/introduction.rst @@ -112,3 +112,63 @@ Please conduct yourself in a respectful and civilised manner when interacting with community members on mailing lists, IRC, or bug trackers. The community represents the project as a whole, and abusive or bullying behaviour is not tolerated by the project. + +Simple DRM drivers to use as examples +===================================== + +The DRM subsystem contains a lot of helper functions to ease writing drivers for +simple graphic devices. For example, the `drivers/gpu/drm/tiny/` directory has a +set of drivers that are simple enough to be implemented in a single source file. + +These drivers make use of the `struct drm_simple_display_pipe_funcs`, that hides +any complexity of the DRM subsystem and just requires drivers to implement a few +functions needed to operate the device. This could be used for devices that just +need a display pipeline with one full-screen scanout buffer feeding one output. + +The tiny DRM drivers are good examples to understand how DRM drivers should look +like. Since are just a few hundreds lines of code, they are quite easy to read. + +External References +=================== + +Delving into a Linux kernel subsystem for the first time can be an overwhelming +experience, one needs to get familiar with all the concepts and learn about the +subsystem's internals, among other details. + +To shallow the learning curve, this section contains a list of presentations +and documents that can be used to learn about DRM/KMS and graphics in general. + +There are different reasons why someone might want to get into DRM: porting an +existing fbdev driver, write a DRM driver for a new hardware, fixing bugs that +could face when working on the graphics user-space stack, etc. For this reason, +the learning material covers many aspects of the Linux graphics stack. From an +overview of the kernel and user-space stacks to very specific topics. + +The list is sorted in reverse chronological order, to keep the most up-to-date +material at the top. But all of them contain useful information, and it can be +valuable to go through older material to understand the rationale and context +in which the changes to the DRM subsystem were made. + +Conference talks +---------------- + +* `An Overview of the Linux and Userspace Graphics Stack <https://www.youtube.com/watch?v=wjAJmqwg47k>`_ - Paul Kocialkowski (2020) +* `Getting pixels on screen on Linux: introduction to Kernel Mode Setting <https://www.youtube.com/watch?v=haes4_Xnc5Q>`_ - Simon Ser (2020) +* `Everything Great about Upstream Graphics <https://www.youtube.com/watch?v=kVzHOgt6WGE>`_ - Daniel Vetter (2019) +* `An introduction to the Linux DRM subsystem <https://www.youtube.com/watch?v=LbDOCJcDRoo>`_ - Maxime Ripard (2017) +* `Embrace the Atomic (Display) Age <https://www.youtube.com/watch?v=LjiB_JeDn2M>`_ - Daniel Vetter (2016) +* `Anatomy of an Atomic KMS Driver <https://www.youtube.com/watch?v=lihqR9sENpc>`_ - Laurent Pinchart (2015) +* `Atomic Modesetting for Drivers <https://www.youtube.com/watch?v=kl9suFgbTc8>`_ - Daniel Vetter (2015) +* `Anatomy of an Embedded KMS Driver <https://www.youtube.com/watch?v=Ja8fM7rTae4>`_ - Laurent Pinchart (2013) + +Slides and articles +------------------- + +* `Understanding the Linux Graphics Stack <https://bootlin.com/doc/training/graphics/graphics-slides.pdf>`_ - Bootlin (2022) +* `DRM KMS overview <https://wiki.st.com/stm32mpu/wiki/DRM_KMS_overview>`_ - STMicroelectronics (2021) +* `Linux graphic stack <https://studiopixl.com/2017-05-13/linux-graphic-stack-an-overview>`_ - Nathan Gauër (2017) +* `Atomic mode setting design overview, part 1 <https://lwn.net/Articles/653071/>`_ - Daniel Vetter (2015) +* `Atomic mode setting design overview, part 2 <https://lwn.net/Articles/653466/>`_ - Daniel Vetter (2015) +* `The DRM/KMS subsystem from a newbie’s point of view <https://bootlin.com/pub/conferences/2014/elce/brezillon-drm-kms/brezillon-drm-kms.pdf>`_ - Boris Brezillon (2014) +* `A brief introduction to the Linux graphics stack <https://blogs.igalia.com/itoral/2014/07/29/a-brief-introduction-to-the-linux-graphics-stack/>`_ - Iago Toral (2014) +* `The Linux Graphics Stack <https://blog.mecheye.net/2012/06/the-linux-graphics-stack/>`_ - Jasper St. Pierre (2012) diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 127e76ee0b2d..10bfb50908d1 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -603,6 +603,20 @@ Level: Advanced Better Testing ============== +Add unit tests using the Kernel Unit Testing (KUnit) framework +-------------------------------------------------------------- + +The `KUnit <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_ +provides a common framework for unit tests within the Linux kernel. Having a +test suite would allow to identify regressions earlier. + +A good candidate for the first unit tests are the format-conversion helpers in +``drm_format_helper.c``. + +Contact: Javier Martinez Canillas <javierm@redhat.com> + +Level: Intermediate + Enable trinity for DRM ---------------------- diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004 deleted file mode 100644 index 4cc3ad99f39b..000000000000 --- a/Documentation/ide/ChangeLog.ide-cd.1994-2004 +++ /dev/null @@ -1,268 +0,0 @@ -/* - * 1.00 Oct 31, 1994 -- Initial version. - * 1.01 Nov 2, 1994 -- Fixed problem with starting request in - * cdrom_check_status. - * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks) - * (from mlord) -- minor changes to cdrom_setup() - * -- renamed ide_dev_s to ide_drive_t, enable irq on command - * 2.00 Nov 27, 1994 -- Generalize packet command interface; - * add audio ioctls. - * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices - * which send an interrupt when ready for a command. - * 2.02 Dec 11, 1994 -- Cache the TOC in the driver. - * Don't use SCMD_PLAYAUDIO_TI; it's not included - * in the current version of ATAPI. - * Try to use LBA instead of track or MSF addressing - * when possible. - * Don't wait for READY_STAT. - * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes - * other than 2k and to move multiple sectors in a - * single transaction. - * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives. - * Thanks to Nick Saw <cwsaw@pts7.pts.mot.com> for - * help in figuring this out. Ditto for Acer and - * Aztech drives, which seem to have the same problem. - * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml - * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request - * or data protect error. - * Use HWIF and DEV_HWIF macros as in ide.c. - * Always try to do a request_sense after - * a failed command. - * Include an option to give textual descriptions - * of ATAPI errors. - * Fix a bug in handling the sector cache which - * showed up if the drive returned data in 512 byte - * blocks (like Pioneer drives). Thanks to - * Richard Hirst <srh@gpt.co.uk> for diagnosing this. - * Properly supply the page number field in the - * MODE_SELECT command. - * PLAYAUDIO12 is broken on the Aztech; work around it. - * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c - * (my apologies to Scott, but now ide-cd.c is independent) - * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl. - * Implement CDROMREADAUDIO ioctl (UNTESTED). - * Use input_ide_data() and output_ide_data(). - * Add door locking. - * Fix usage count leak in cdrom_open, which happened - * when a read-write mount was attempted. - * Try to load the disk on open. - * Implement CDROMEJECT_SW ioctl (off by default). - * Read total cdrom capacity during open. - * Rearrange logic in cdrom_decode_status. Issue - * request sense commands for failed packet commands - * from here instead of from cdrom_queue_packet_command. - * Fix a race condition in retrieving error information. - * Suppress printing normal unit attention errors and - * some drive not ready errors. - * Implement CDROMVOLREAD ioctl. - * Implement CDROMREADMODE1/2 ioctls. - * Fix race condition in setting up interrupt handlers - * when the `serialize' option is used. - * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in - * cdrom_queue_request. - * Another try at using ide_[input,output]_data. - * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well. - * Make VERBOSE_IDE_CD_ERRORS dump failed command again. - * Dump out more information for ILLEGAL REQUEST errs. - * Fix handling of errors occurring before the - * packet command is transferred. - * Fix transfers with odd bytelengths. - * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'. - * `DCI-2S10' drives are broken too. - * 3.04 Nov 20, 1995 -- So are Vertos drives. - * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c - * 3.06 Dec 16, 1995 -- Add support needed for partitions. - * More workarounds for Vertos bugs (based on patches - * from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>). - * Try to eliminate byteorder assumptions. - * Use atapi_cdrom_subchnl struct definition. - * Add STANDARD_ATAPI compilation option. - * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D, - * Vertos 300. - * Add NO_DOOR_LOCKING configuration option. - * Handle drive_cmd requests w/NULL args (for hdparm -t). - * Work around sporadic Sony55e audio play problem. - * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix - * problem with "hde=cdrom" with no drive present. -ml - * 3.08 Mar 6, 1996 -- More Vertos workarounds. - * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl. - * Switch to using MSF addressing for audio commands. - * Reformat to match kernel tabbing style. - * Add CDROM_GET_UPC ioctl. - * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI. - * 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt <heiko@colossus.escape.de> - * to remove redundant verify_area calls. - * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches - * from Gerhard Zuber <zuber@berlin.snafu.de>. - * Let open succeed even if there's no loaded disc. - * 3.13 May 19, 1996 -- Fixes for changer code. - * 3.14 May 29, 1996 -- Add work-around for Vertos 600. - * (From Hennus Bergman <hennus@sky.ow.nl>.) - * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers - * from Ben Galliart <bgallia@luc.edu> with - * special help from Jeff Lightfoot - * <jeffml@pobox.com> - * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification - * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl. - * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives. - * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC. - * 3.18 Oct 31, 1996 -- Added module and DMA support. - * - * 4.00 Nov 5, 1996 -- New ide-cd maintainer, - * Erik B. Andersen <andersee@debian.org> - * -- Newer Creative drives don't always set the error - * register correctly. Make sure we see media changes - * regardless. - * -- Integrate with generic cdrom driver. - * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on - * a patch from Ciro Cattuto <>. - * -- Call set_device_ro. - * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE - * ioctls, based on patch by Erik Andersen - * -- Add some probes of drive capability during setup. - * - * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h - * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE - * ioctls in favor of a generalized approach - * using the generic cdrom driver. - * -- Fully integrated with the 2.1.X kernel. - * -- Other stuff that I forgot (lots of changes) - * - * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il> - * to fix the drive door locking problems. - * - * 4.03 Dec 04, 1996 -- Added DSC overlap support. - * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch - * by Ales Makarov (xmakarov@sun.felk.cvut.cz) - * - * 4.05 Nov 20, 1997 -- Modified to print more drive info on init - * Minor other changes - * Fix errors on CDROMSTOP (If you have a "Dolphin", - * you must define IHAVEADOLPHIN) - * Added identifier so new Sanyo CD-changer works - * Better detection if door locking isn't supported - * - * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml - * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open" - * 4.08 Dec 18, 1997 -- spew less noise when tray is empty - * -- fix speed display for ACER 24X, 18X - * 4.09 Jan 04, 1998 -- fix handling of the last block so we return - * an end of file instead of an I/O error (Gadi) - * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new - * slot when there is no disc in the current slot. - * -- Fixed a memory leak where info->changer_info was - * malloc'ed but never free'd when closing the device. - * -- Cleaned up the global namespace a bit by making more - * functions static that should already have been. - * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl - * based on a patch for 2.0.33 by Jelle Foks - * <jelle@scintilla.utwente.nl>, a patch for 2.0.33 - * by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI - * version, and my own efforts. -erik - * -- Fixed a stupid bug which egcs was kind enough to - * inform me of where "Illegal mode for this track" - * was never returned due to a comparison on data - * types of limited range. - * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is - * now set ionly for CD-R and CD-RW drives. I had - * removed this support because it produced errors. - * It produced errors _only_ for non-writers. duh. - * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready" - * messages, since this is not an error. - * -- Change error messages to be const - * -- Remove a "\t" which looks ugly in the syslogs - * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec - * since the .pdf version doesn't seem to work... - * -- Updated the TODO list to something more current. - * - * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness, - * patch thanks to "Eddie C. Dost" <ecd@skynet.be> - * - * 4.50 Oct 19, 1998 -- New maintainers! - * Jens Axboe <axboe@image.dk> - * Chris Zwilling <chris@cloudnet.com> - * - * 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk> - * - ide_cdrom_reset enabled since the ide subsystem - * handles resets fine now. <axboe@image.dk> - * - Transfer size fix for Samsung CD-ROMs, thanks to - * "Ville Hallik" <ville.hallik@mail.ee>. - * - other minor stuff. - * - * 4.52 Jan 19, 1999 -- Jens Axboe <axboe@image.dk> - * - Detect DVD-ROM/RAM drives - * - * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar - * drive in transfer size limit. - * - Fix the I/O error when doing eject without a medium - * loaded on some drives. - * - CDROMREADMODE2 is now implemented through - * CDROMREADRAW, since many drives don't support - * MODE2 (even though ATAPI 2.6 says they must). - * - Added ignore parameter to ide-cd (as a module), eg - * insmod ide-cd ignore='hda hdb' - * Useful when using ide-cd in conjunction with - * ide-scsi. TODO: non-modular way of doing the - * same. - * - * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic - * packet interface to cdrom.c. - * - Unified audio ioctl support, most of it. - * - cleaned up various deprecated verify_area(). - * - Added ide_cdrom_packet() as the interface for - * the Uniform generic_packet(). - * - bunch of other stuff, will fill in logs later. - * - report 1 slot for non-changers, like the other - * cd-rom drivers. don't report select disc for - * non-changers as well. - * - mask out audio playing, if the device can't do it. - * - * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except - * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers - * use this independently of the actual audio handling. - * They will disappear later when I get the time to - * do it cleanly. - * - Minimize the TOC reading - only do it when we - * know a media change has occurred. - * - Moved all the CDROMREADx ioctls to the Uniform layer. - * - Heiko Eißfeldt <heiko@colossus.escape.de> supplied - * some fixes for CDI. - * - CD-ROM leaving door locked fix from Andries - * Brouwer <Andries.Brouwer@cwi.nl> - * - Erik Andersen <andersen@xmission.com> unified - * commands across the various drivers and how - * sense errors are handled. - * - * 4.56 Sep 12, 1999 - Removed changer support - it is now in the - * Uniform layer. - * - Added partition based multisession handling. - * - Mode sense and mode select moved to the - * Uniform layer. - * - Fixed a problem with WPI CDS-32X drive - it - * failed the capabilities - * - * 4.57 Apr 7, 2000 - Fixed sense reporting. - * - Fixed possible oops in ide_cdrom_get_last_session() - * - Fix locking mania and make ide_cdrom_reset relock - * - Stop spewing errors to log when magicdev polls with - * TEST_UNIT_READY on some drives. - * - Various fixes from Tobias Ringstrom: - * tray if it was locked prior to the reset. - * - cdrom_read_capacity returns one frame too little. - * - Fix real capacity reporting. - * - * 4.58 May 1, 2000 - Clean up ACER50 stuff. - * - Fix small problem with ide_cdrom_capacity - * - * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't - * correctly sensing a disc change. - * - Rearranged some code - * - Use extended sense on drives that support it for - * correctly reporting tray status -- from - * Michael D Johnson <johnsom@orst.edu> - * 4.60 Dec 17, 2003 - Add mt rainier support - * - Bump timeout for packet commands, matches sr - * - Odd stuff - * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB, - * Pascal Schmidt <der.eremit@email.de> - */ diff --git a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 b/Documentation/ide/ChangeLog.ide-floppy.1996-2002 deleted file mode 100644 index 46c19ef32a9e..000000000000 --- a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many - * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive. - * - * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c. - * Ver 0.2 Oct 31 96 Minor changes. - * Ver 0.3 Dec 2 96 Fixed error recovery bug. - * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl. - * Ver 0.5 Feb 21 97 Add partitions support. - * Use the minimum of the LBA and CHS capacities. - * Avoid hwgroup->rq == NULL on the last irq. - * Fix potential null dereferencing with DEBUG_LOG. - * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds. - * Add media write-protect detection. - * Issue START command only if TEST UNIT READY fails. - * Add work-around for IOMEGA ZIP revision 21.D. - * Remove idefloppy_get_capabilities(). - * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of - * bytes requested on each interrupt to be zero. - * Thanks to <shanos@es.co.nz> for pointing this out. - * Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@courier-mta.com> - * Implement low level formatting. Reimplemented - * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp - * bit. My LS-120 drive barfs on - * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me. - * Compromise by not reporting a failure to get this - * mode page. Implemented four IOCTLs in order to - * implement formatting. IOCTls begin with 0x4600, - * 0x46 is 'F' as in Format. - * Jan 9 01 Userland option to select format verify. - * Added PC_SUPPRESS_ERROR flag - some idefloppy drives - * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and - * return a sense error. Suppress error reporting in - * this particular case in order to avoid spurious - * errors in syslog. The culprit is - * idefloppy_get_capability_page(), so move it to - * idefloppy_begin_format() so that it's not used - * unless absolutely necessary. - * If drive does not support format progress indication - * monitor the dsc bit in the status register. - * Also, O_NDELAY on open will allow the device to be - * opened without a disk available. This can be used to - * open an unformatted disk, or get the device capacity. - * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by - * <paul@paulbristow.net> - * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this - * driver. Included Powerbook internal zip kludge. - * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive - * no disk on insert and disk change now works - * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere - * Ver 0.95 Nov 7 00 Brought across to kernel 2.4 - * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0 - * including set_bit patch from Rusty Russell - * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series - * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3 - * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to - * fix a lost interrupt problem. It appears the busy - * bit was being deasserted by my IOMEGA ATAPI ZIP 100 - * drive before the drive was actually ready. - * Ver 0.98a Oct 29 01 Expose delay value so we can play. - * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code - * to support new PocketZip drives - */ diff --git a/Documentation/ide/ChangeLog.ide-tape.1995-2002 b/Documentation/ide/ChangeLog.ide-tape.1995-2002 deleted file mode 100644 index 877fac8770b3..000000000000 --- a/Documentation/ide/ChangeLog.ide-tape.1995-2002 +++ /dev/null @@ -1,257 +0,0 @@ -/* - * Ver 0.1 Nov 1 95 Pre-working code :-) - * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure - * was successful ! (Using tar cvf ... on the block - * device interface). - * A longer backup resulted in major swapping, bad - * overall Linux performance and eventually failed as - * we received non serial read-ahead requests from the - * buffer cache. - * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the - * character device interface. Linux's responsiveness - * and performance doesn't seem to be much affected - * from the background backup procedure. - * Some general mtio.h magnetic tape operations are - * now supported by our character device. As a result, - * popular tape utilities are starting to work with - * ide tapes :-) - * The following configurations were tested: - * 1. An IDE ATAPI TAPE shares the same interface - * and irq with an IDE ATAPI CDROM. - * 2. An IDE ATAPI TAPE shares the same interface - * and irq with a normal IDE disk. - * Both configurations seemed to work just fine ! - * However, to be on the safe side, it is meanwhile - * recommended to give the IDE TAPE its own interface - * and irq. - * The one thing which needs to be done here is to - * add a "request postpone" feature to ide.c, - * so that we won't have to wait for the tape to finish - * performing a long media access (DSC) request (such - * as a rewind) before we can access the other device - * on the same interface. This effect doesn't disturb - * normal operation most of the time because read/write - * requests are relatively fast, and once we are - * performing one tape r/w request, a lot of requests - * from the other device can be queued and ide.c will - * service all of them after this single tape request. - * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. - * On each read / write request, we now ask the drive - * if we can transfer a constant number of bytes - * (a parameter of the drive) only to its buffers, - * without causing actual media access. If we can't, - * we just wait until we can by polling the DSC bit. - * This ensures that while we are not transferring - * more bytes than the constant referred to above, the - * interrupt latency will not become too high and - * we won't cause an interrupt timeout, as happened - * occasionally in the previous version. - * While polling for DSC, the current request is - * postponed and ide.c is free to handle requests from - * the other device. This is handled transparently to - * ide.c. The hwgroup locking method which was used - * in the previous version was removed. - * Use of new general features which are provided by - * ide.c for use with atapi devices. - * (Programming done by Mark Lord) - * Few potential bug fixes (Again, suggested by Mark) - * Single character device data transfers are now - * not limited in size, as they were before. - * We are asking the tape about its recommended - * transfer unit and send a larger data transfer - * as several transfers of the above size. - * For best results, use an integral number of this - * basic unit (which is shown during driver - * initialization). I will soon add an ioctl to get - * this important parameter. - * Our data transfer buffer is allocated on startup, - * rather than before each data transfer. This should - * ensure that we will indeed have a data buffer. - * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape - * shared an interface with another device. - * (poll_for_dsc was a complete mess). - * Removed some old (non-active) code which had - * to do with supporting buffer cache originated - * requests. - * The block device interface can now be opened, so - * that general ide driver features like the unmask - * interrupts flag can be selected with an ioctl. - * This is the only use of the block device interface. - * New fast pipelined operation mode (currently only on - * writes). When using the pipelined mode, the - * throughput can potentially reach the maximum - * tape supported throughput, regardless of the - * user backup program. On my tape drive, it sometimes - * boosted performance by a factor of 2. Pipelined - * mode is enabled by default, but since it has a few - * downfalls as well, you may want to disable it. - * A short explanation of the pipelined operation mode - * is available below. - * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. - * Added pipeline read mode. As a result, restores - * are now as fast as backups. - * Optimized shared interface behavior. The new behavior - * typically results in better IDE bus efficiency and - * higher tape throughput. - * Pre-calculation of the expected read/write request - * service time, based on the tape's parameters. In - * the pipelined operation mode, this allows us to - * adjust our polling frequency to a much lower value, - * and thus to dramatically reduce our load on Linux, - * without any decrease in performance. - * Implemented additional mtio.h operations. - * The recommended user block size is returned by - * the MTIOCGET ioctl. - * Additional minor changes. - * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the - * use of some block sizes during a restore procedure. - * The character device interface will now present a - * continuous view of the media - any mix of block sizes - * during a backup/restore procedure is supported. The - * driver will buffer the requests internally and - * convert them to the tape's recommended transfer - * unit, making performance almost independent of the - * chosen user block size. - * Some improvements in error recovery. - * By cooperating with ide-dma.c, bus mastering DMA can - * now sometimes be used with IDE tape drives as well. - * Bus mastering DMA has the potential to dramatically - * reduce the CPU's overhead when accessing the device, - * and can be enabled by using hdparm -d1 on the tape's - * block device interface. For more info, read the - * comments in ide-dma.c. - * Ver 1.4 Mar 13 96 Fixed serialize support. - * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. - * Fixed pipelined read mode inefficiency. - * Fixed nasty null dereferencing bug. - * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. - * Fixed end of media bug. - * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. - * Ver 1.8 Sep 26 96 Attempt to find a better balance between good - * interactive response and high system throughput. - * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather - * than requiring an explicit FSF command. - * Abort pending requests at end of media. - * MTTELL was sometimes returning incorrect results. - * Return the real block size in the MTIOCGET ioctl. - * Some error recovery bug fixes. - * Ver 1.10 Nov 5 96 Major reorganization. - * Reduced CPU overhead a bit by eliminating internal - * bounce buffers. - * Added module support. - * Added multiple tape drives support. - * Added partition support. - * Rewrote DSC handling. - * Some portability fixes. - * Removed ide-tape.h. - * Additional minor changes. - * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. - * Use ide_stall_queue() for DSC overlap. - * Use the maximum speed rather than the current speed - * to compute the request service time. - * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data - * corruption, which could occur if the total number - * of bytes written to the tape was not an integral - * number of tape blocks. - * Add support for INTERRUPT DRQ devices. - * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB - * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. - * Replace cli()/sti() with hwgroup spinlocks. - * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup - * spinlock with private per-tape spinlock. - * Ver 1.16 Sep 1 99 Add OnStream tape support. - * Abort read pipeline on EOD. - * Wait for the tape to become ready in case it returns - * "in the process of becoming ready" on open(). - * Fix zero padding of the last written block in - * case the tape block size is larger than PAGE_SIZE. - * Decrease the default disconnection time to tn. - * Ver 1.16e Oct 3 99 Minor fixes. - * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, - * niessen@iae.nl / arnold.niessen@philips.com - * GO-1) Undefined code in idetape_read_position - * according to Gadi's email - * AJN-1) Minor fix asc == 11 should be asc == 0x11 - * in idetape_issue_packet_command (did effect - * debugging output only) - * AJN-2) Added more debugging output, and - * added ide-tape: where missing. I would also - * like to add tape->name where possible - * AJN-3) Added different debug_level's - * via /proc/ide/hdc/settings - * "debug_level" determines amount of debugging output; - * can be changed using /proc/ide/hdx/settings - * 0 : almost no debugging output - * 1 : 0+output errors only - * 2 : 1+output all sensekey/asc - * 3 : 2+follow all chrdev related procedures - * 4 : 3+follow all procedures - * 5 : 4+include pc_stack rq_stack info - * 6 : 5+USE_COUNT updates - * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail - * from 5 to 10 minutes - * AJN-5) Changed maximum number of blocks to skip when - * reading tapes with multiple consecutive write - * errors from 100 to 1000 in idetape_get_logical_blk - * Proposed changes to code: - * 1) output "logical_blk_num" via /proc - * 2) output "current_operation" via /proc - * 3) Either solve or document the fact that `mt rewind' is - * required after reading from /dev/nhtx to be - * able to rmmod the idetape module; - * Also, sometimes an application finishes but the - * device remains `busy' for some time. Same cause ? - * Proposed changes to release-notes: - * 4) write a simple `quickstart' section in the - * release notes; I volunteer if you don't want to - * 5) include a pointer to video4linux in the doc - * to stimulate video applications - * 6) release notes lines 331 and 362: explain what happens - * if the application data rate is higher than 1100 KB/s; - * similar approach to lower-than-500 kB/s ? - * 7) 6.6 Comparison; wouldn't it be better to allow different - * strategies for read and write ? - * Wouldn't it be better to control the tape buffer - * contents instead of the bandwidth ? - * 8) line 536: replace will by would (if I understand - * this section correctly, a hypothetical and unwanted situation - * is being described) - * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. - * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl - * - Add idetape_onstream_mode_sense_tape_parameter_page - * function to get tape capacity in frames: tape->capacity. - * - Add support for DI-50 drives( or any DI- drive). - * - 'workaround' for read error/blank block around block 3000. - * - Implement Early warning for end of media for Onstream. - * - Cosmetic code changes for readability. - * - Idetape_position_tape should not use SKIP bit during - * Onstream read recovery. - * - Add capacity, logical_blk_num and first/last_frame_position - * to /proc/ide/hd?/settings. - * - Module use count was gone in the Linux 2.4 driver. - * Ver 1.17a Apr 2001 Willem Riede osst@riede.org - * - Get drive's actual block size from mode sense block descriptor - * - Limit size of pipeline - * Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu> - * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used - * it in the code! - * Actually removed aborted stages in idetape_abort_pipeline - * instead of just changing the command code. - * Made the transfer byte count for Request Sense equal to the - * actual length of the data transfer. - * Changed handling of partial data transfers: they do not - * cause DMA errors. - * Moved initiation of DMA transfers to the correct place. - * Removed reference to unallocated memory. - * Made __idetape_discard_read_pipeline return the number of - * sectors skipped, not the number of stages. - * Replaced errant kfree() calls with __idetape_kfree_stage(). - * Fixed off-by-one error in testing the pipeline length. - * Fixed handling of filemarks in the read pipeline. - * Small code optimization for MTBSF and MTBSFM ioctls. - * Don't try to unlock the door during device close if is - * already unlocked! - * Cosmetic fixes to miscellaneous debugging output messages. - * Set the minimum /proc/ide/hd?/settings values for "pipeline", - * "pipeline_min", and "pipeline_max" to 1. - */ diff --git a/Documentation/ide/changelogs.rst b/Documentation/ide/changelogs.rst deleted file mode 100644 index fdf9d0fb8027..000000000000 --- a/Documentation/ide/changelogs.rst +++ /dev/null @@ -1,17 +0,0 @@ -Changelog for ide cd --------------------- - - .. include:: ChangeLog.ide-cd.1994-2004 - :literal: - -Changelog for ide floppy ------------------------- - - .. include:: ChangeLog.ide-floppy.1996-2002 - :literal: - -Changelog for ide tape ----------------------- - - .. include:: ChangeLog.ide-tape.1995-2002 - :literal: diff --git a/Documentation/ide/ide-tape.rst b/Documentation/ide/ide-tape.rst deleted file mode 100644 index 3e061d9c0e38..000000000000 --- a/Documentation/ide/ide-tape.rst +++ /dev/null @@ -1,68 +0,0 @@ -=============================== -IDE ATAPI streaming tape driver -=============================== - -This driver is a part of the Linux ide driver. - -The driver, in co-operation with ide.c, basically traverses the -request-list for the block device interface. The character device -interface, on the other hand, creates new requests, adds them -to the request-list of the block device, and waits for their completion. - -The block device major and minor numbers are determined from the -tape's relative position in the ide interfaces, as explained in ide.c. - -The character device interface consists of the following devices:: - - ht0 major 37, minor 0 first IDE tape, rewind on close. - ht1 major 37, minor 1 second IDE tape, rewind on close. - ... - nht0 major 37, minor 128 first IDE tape, no rewind on close. - nht1 major 37, minor 129 second IDE tape, no rewind on close. - ... - -The general magnetic tape commands compatible interface, as defined by -include/linux/mtio.h, is accessible through the character device. - -General ide driver configuration options, such as the interrupt-unmask -flag, can be configured by issuing an ioctl to the block device interface, -as any other ide device. - -Our own ide-tape ioctl's can be issued to either the block device or -the character device interface. - -Maximal throughput with minimal bus load will usually be achieved in the -following scenario: - - 1. ide-tape is operating in the pipelined operation mode. - 2. No buffering is performed by the user backup program. - -Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. - -Here are some words from the first releases of hd.c, which are quoted -in ide.c and apply here as well: - -* Special care is recommended. Have Fun! - -Possible improvements -===================== - -1. Support for the ATAPI overlap protocol. - -In order to maximize bus throughput, we currently use the DSC -overlap method which enables ide.c to service requests from the -other device while the tape is busy executing a command. The -DSC overlap method involves polling the tape's status register -for the DSC bit, and servicing the other device while the tape -isn't ready. - -In the current QIC development standard (December 1995), -it is recommended that new tape drives will *in addition* -implement the ATAPI overlap protocol, which is used for the -same purpose - efficient use of the IDE bus, but is interrupt -driven and thus has much less CPU overhead. - -ATAPI overlap is likely to be supported in most new ATAPI -devices, including new ATAPI cdroms, and thus provides us -a method by which we can achieve higher throughput when -sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. diff --git a/Documentation/ide/ide.rst b/Documentation/ide/ide.rst deleted file mode 100644 index 88bdcba92f7d..000000000000 --- a/Documentation/ide/ide.rst +++ /dev/null @@ -1,265 +0,0 @@ -============================================ -Information regarding the Enhanced IDE drive -============================================ - - The hdparm utility can be used to control various IDE features on a - running system. It is packaged separately. Please Look for it on popular - linux FTP sites. - -------------------------------------------------------------------------------- - -.. important:: - - BUGGY IDE CHIPSETS CAN CORRUPT DATA!! - - PCI versions of the CMD640 and RZ1000 interfaces are now detected - automatically at startup when PCI BIOS support is configured. - - Linux disables the "prefetch" ("readahead") mode of the RZ1000 - to prevent data corruption possible due to hardware design flaws. - - For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any - drive for which the "prefetch" mode of the CMD640 is turned on. - If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be - used again. - - For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive - for which the "prefetch" mode of the CMD640 is turned off. - If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be - used again. - - The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT* - automatically detected by Linux. For safe, reliable operation with such - interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option. - - Use of the "serialize" option is no longer necessary. - -------------------------------------------------------------------------------- - -Common pitfalls -=============== - -- 40-conductor IDE cables are capable of transferring data in DMA modes up to - udma2, but no faster. - -- If possible devices should be attached to separate channels if they are - available. Typically the disk on the first and CD-ROM on the second. - -- If you mix devices on the same cable, please consider using similar devices - in respect of the data transfer mode they support. - -- Even better try to stick to the same vendor and device type on the same - cable. - -This is the multiple IDE interface driver, as evolved from hd.c -=============================================================== - -It supports up to 9 IDE interfaces per default, on one or more IRQs (usually -14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.:: - - Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64 - Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64 - Tertiary: ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64 - Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64 - fifth.. ide4, usually PCI, probed - sixth.. ide5, usually PCI, probed - -To access devices on interfaces > ide0, device entries please make sure that -device files for them are present in /dev. If not, please create such -entries, by using /dev/MAKEDEV. - -This driver automatically probes for most IDE interfaces (including all PCI -ones), for the drives/geometries attached to those interfaces, and for the IRQ -lines being used by the interfaces (normally 14, 15 for ide0/ide1). - -Any number of interfaces may share a single IRQ if necessary, at a slight -performance penalty, whether on separate cards or a single VLB card. -The IDE driver automatically detects and handles this. However, this may -or may not be harmful to your hardware.. two or more cards driving the same IRQ -can potentially burn each other's bus driver, though in practice this -seldom occurs. Be careful, and if in doubt, don't do it! - -Drives are normally found by auto-probing and/or examining the CMOS/BIOS data. -For really weird situations, the apparent (fdisk) geometry can also be specified -on the kernel "command line" using LILO. The format of such lines is:: - - ide_core.chs=[interface_number.device_number]:cyls,heads,sects - -or:: - - ide_core.cdrom=[interface_number.device_number] - -For example:: - - ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1 - -The results of successful auto-probing may override the physical geometry/irq -specified, though the "original" geometry may be retained as the "logical" -geometry for partitioning purposes (fdisk). - -If the auto-probing during boot time confuses a drive (ie. the drive works -with hd.c but not with ide.c), then an command line option may be specified -for each drive for which you'd like the drive to skip the hardware -probe/identification sequence. For example:: - - ide_core.noprobe=0.1 - -or:: - - ide_core.chs=1.0:768,16,32 - ide_core.noprobe=1.0 - -Note that when only one IDE device is attached to an interface, it should be -jumpered as "single" or "master", *not* "slave". Many folks have had -"trouble" with cdroms because of this requirement, so the driver now probes -for both units, though success is more likely when the drive is jumpered -correctly. - -Courtesy of Scott Snyder and others, the driver supports ATAPI cdrom drives -such as the NEC-260 and the new MITSUMI triple/quad speed drives. -Such drives will be identified at boot time, just like a hard disk. - -If for some reason your cdrom drive is *not* found at boot time, you can force -the probe to look harder by supplying a kernel command line parameter -via LILO, such as::: - - ide_core.cdrom=1.0 /* "master" on second interface (hdc) */ - -or:: - - ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */ - -For example, a GW2000 system might have a hard drive on the primary -interface (/dev/hda) and an IDE cdrom drive on the secondary interface -(/dev/hdc). To mount a CD in the cdrom drive, one would use something like:: - - ln -sf /dev/hdc /dev/cdrom - mkdir /mnt/cdrom - mount /dev/cdrom /mnt/cdrom -t iso9660 -o ro - -If, after doing all of the above, mount doesn't work and you see -errors from the driver (with dmesg) complaining about `status=0xff`, -this means that the hardware is not responding to the driver's attempts -to read it. One of the following is probably the problem: - - - Your hardware is broken. - - - You are using the wrong address for the device, or you have the - drive jumpered wrong. Review the configuration instructions above. - - - Your IDE controller requires some nonstandard initialization sequence - before it will work properly. If this is the case, there will often - be a separate MS-DOS driver just for the controller. IDE interfaces - on sound cards usually fall into this category. Such configurations - can often be made to work by first booting MS-DOS, loading the - appropriate drivers, and then warm-booting linux (without powering - off). This can be automated using loadlin in the MS-DOS autoexec. - -If you always get timeout errors, interrupts from the drive are probably -not making it to the host. Check how you have the hardware jumpered -and make sure it matches what the driver expects (see the configuration -instructions above). If you have a PCI system, also check the BIOS -setup; I've had one report of a system which was shipped with IRQ 15 -disabled by the BIOS. - -The kernel is able to execute binaries directly off of the cdrom, -provided it is mounted with the default block size of 1024 (as above). - -Please pass on any feedback on any of this stuff to the maintainer, -whose address can be found in linux/MAINTAINERS. - -The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy -drivers can always be compiled as loadable modules, the chipset drivers -can only be compiled into the kernel, and the core code (ide.c) can be -compiled as a loadable module provided no chipset support is needed. - -When using ide.c as a module in combination with kmod, add:: - - alias block-major-3 ide-probe - -to a configuration file in /etc/modprobe.d/. - -When ide.c is used as a module, you can pass command line parameters to the -driver using the "options=" keyword to insmod, while replacing any ',' with -';'. - - -Summary of ide driver parameters for kernel command line -======================================================== - -For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672) -you need to explicitly enable probing by using "probe" kernel parameter, -i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: - -* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel - -* "probe" module parameter when ali14xx driver is compiled as module - ("modprobe ali14xx probe") - -Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" -kernel paremeter to enable probing for VLB version of the chipset (PCI ones -are detected automatically). - -You also need to use "probe" kernel parameter for ide-4drives driver -(support for IDE generic chipset with four drives on one port). - -To enable support for IDE doublers on Amiga use "doubler" kernel parameter -for gayle host driver (i.e. "gayle.doubler" if the driver is built-in). - -To force ignoring cable detection (this should be needed only if you're using -short 40-wires cable which cannot be automatically detected - if this is not -a case please report it as a bug instead) use "ignore_cable" kernel parameter: - -* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in - (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1") - -* "ignore_cable=[interface_number]" module parameter (for ide_core module) - if IDE is compiled as module - -Other kernel parameters for ide_core are: - -* "nodma=[interface_number.device_number]" to disallow DMA for a device - -* "noflush=[interface_number.device_number]" to disable flush requests - -* "nohpa=[interface_number.device_number]" to disable Host Protected Area - -* "noprobe=[interface_number.device_number]" to skip probing - -* "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit - -* "cdrom=[interface_number.device_number]" to force device as a CD-ROM - -* "chs=[interface_number.device_number]" to force device as a disk (using CHS) - - -Some Terminology -================ - -IDE - Integrated Drive Electronics, meaning that each drive has a built-in - controller, which is why an "IDE interface card" is not a "controller card". - -ATA - AT (the old IBM 286 computer) Attachment Interface, a draft American - National Standard for connecting hard drives to PCs. This is the official - name for "IDE". - - The latest standards define some enhancements, known as the ATA-6 spec, - which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations. - -ATAPI - ATA Packet Interface, a new protocol for controlling the drives, - similar to SCSI protocols, created at the same time as the ATA2 standard. - ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or - LS120/240) devices, removable R/W cartridges, and for high capacity hard disk - drives. - -mlord@pobox.com - - -Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current -maintainer. - -Wed Aug 20 22:31:29 CEST 2003 updated ide boot options to current ide.c -comments at 2.6.0-test4 time. Maciej Soltysiak <solt@dns.toxicfilms.tv> diff --git a/Documentation/ide/index.rst b/Documentation/ide/index.rst deleted file mode 100644 index 813dfe611a31..000000000000 --- a/Documentation/ide/index.rst +++ /dev/null @@ -1,21 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================================== -Integrated Drive Electronics (IDE) -================================== - -.. toctree:: - :maxdepth: 1 - - ide - ide-tape - warm-plug-howto - - changelogs - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/ide/warm-plug-howto.rst b/Documentation/ide/warm-plug-howto.rst deleted file mode 100644 index c245242ef2f1..000000000000 --- a/Documentation/ide/warm-plug-howto.rst +++ /dev/null @@ -1,18 +0,0 @@ -=================== -IDE warm-plug HOWTO -=================== - -To warm-plug devices on a port 'idex':: - - # echo -n "1" > /sys/class/ide_port/idex/delete_devices - -unplug old device(s) and plug new device(s):: - - # echo -n "1" > /sys/class/ide_port/idex/scan - -done - -NOTE: please make sure that partitions are unmounted and that there are -no other active references to devices before doing "delete_devices" step, -also do not attempt "scan" step on devices currently in use -- otherwise -results may be unpredictable and lead to data loss if you're unlucky diff --git a/Documentation/index.rst b/Documentation/index.rst index 1988c19d9daf..062cf88c2216 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -103,7 +103,6 @@ needed). block/index cdrom/index cpu-freq/index - ide/index fb/index fpga/index hid/index @@ -169,7 +168,6 @@ to ReStructured Text format, or are simply too old. tools/index staging/index - watch_queue Translations diff --git a/Documentation/input/devices/atarikbd.rst b/Documentation/input/devices/atarikbd.rst index 745e7a1ff122..0c4c7804ccb2 100644 --- a/Documentation/input/devices/atarikbd.rst +++ b/Documentation/input/devices/atarikbd.rst @@ -288,7 +288,7 @@ between 0 and large positive numbers. Excess motion below 0 is ignored. The command sets the maximum positive value that can be attained in the scaled coordinate system. Motion beyond that value is also ignored. -SET MOUSE KEYCODE MOSE +SET MOUSE KEYCODE MODE ---------------------- :: @@ -333,7 +333,7 @@ occur before the internally maintained coordinate is changed by one (independently scaled for each axis). Remember that the mouse position information is available only by interrogating the ikbd in the ABSOLUTE MOUSE POSITIONING mode unless the ikbd has been commanded to report on button press -or release (see SET MOSE BUTTON ACTION). +or release (see SET MOUSE BUTTON ACTION). INTERROGATE MOUSE POSITION -------------------------- diff --git a/Documentation/input/devices/ntrig.rst b/Documentation/input/devices/ntrig.rst index a6b22ce6c61c..1559f53495cb 100644 --- a/Documentation/input/devices/ntrig.rst +++ b/Documentation/input/devices/ntrig.rst @@ -32,7 +32,7 @@ The following parameters are used to configure filters to reduce noise: |activation_height, |size threshold to activate immediately | |activation_width | | +-----------------------+-----------------------------------------------------+ -|min_height, |size threshold bellow which fingers are ignored | +|min_height, |size threshold below which fingers are ignored | |min_width |both to decide activation and during activity | +-----------------------+-----------------------------------------------------+ |deactivate_slack |the number of "no contact" frames to ignore before | diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 93a5b6e1fabd..a7173843a294 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -693,6 +693,8 @@ in documenting basic Kconfig syntax a more precise definition of Kconfig semantics is welcomed. One project deduced Kconfig semantics through the use of the xconfig configurator [1]_. Work should be done to confirm if the deduced semantics matches our intended Kconfig design goals. +Another project formalized a denotational semantics of a core subset of +the Kconfig language [10]_. Having well defined semantics can be useful for tools for practical evaluation of dependencies, for instance one such case was work to @@ -700,6 +702,8 @@ express in boolean abstraction of the inferred semantics of Kconfig to translate Kconfig logic into boolean formulas and run a SAT solver on this to find dead code / features (always inactive), 114 dead features were found in Linux using this methodology [1]_ (Section 8: Threats to validity). +The kismet tool, based on the semantics in [10]_, finds abuses of reverse +dependencies and has led to dozens of committed fixes to Linux Kconfig files [11]_. Confirming this could prove useful as Kconfig stands as one of the leading industrial variability modeling languages [1]_ [2]_. Its study would help @@ -738,3 +742,5 @@ https://kernelnewbies.org/KernelProjects/kconfig-sat .. [7] https://vamos.cs.fau.de .. [8] https://undertaker.cs.fau.de .. [9] https://www4.cs.fau.de/Publications/2011/tartler_11_eurosys.pdf +.. [10] https://paulgazzillo.com/papers/esecfse21.pdf +.. [11] https://github.com/paulgazz/kmax diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst index 55bd37a2efb0..ebd9d90882ea 100644 --- a/Documentation/kernel-hacking/hacking.rst +++ b/Documentation/kernel-hacking/hacking.rst @@ -112,8 +112,7 @@ time, although different tasklets can run simultaneously. .. warning:: The name 'tasklet' is misleading: they have nothing to do with - 'tasks', and probably more to do with some bad vodka Alexey - Kuznetsov had at the time. + 'tasks'. You can tell you are in a softirq (or tasklet) using the :c:func:`in_softirq()` macro (``include/linux/preempt.h``). @@ -290,8 +289,8 @@ userspace. Unlike :c:func:`put_user()` and :c:func:`get_user()`, they return the amount of uncopied data (ie. 0 still means success). -[Yes, this moronic interface makes me cringe. The flamewar comes up -every year or so. --RR.] +[Yes, this objectionable interface makes me cringe. The flamewar comes +up every year or so. --RR.] The functions may sleep implicitly. This should never be called outside user context (it makes no sense), with interrupts disabled, or a @@ -645,8 +644,9 @@ names in development kernels; this is not done just to keep everyone on their toes: it reflects a fundamental change (eg. can no longer be called with interrupts on, or does extra checks, or doesn't do checks which were caught before). Usually this is accompanied by a fairly -complete note to the linux-kernel mailing list; search the archive. -Simply doing a global replace on the file usually makes things **worse**. +complete note to the appropriate kernel development mailing list; search +the archives. Simply doing a global replace on the file usually makes +things **worse**. Initializing structure members ------------------------------ @@ -723,14 +723,14 @@ Putting Your Stuff in the Kernel In order to get your stuff into shape for official inclusion, or even to make a neat patch, there's administrative work to be done: -- Figure out whose pond you've been pissing in. Look at the top of the - source files, inside the ``MAINTAINERS`` file, and last of all in the - ``CREDITS`` file. You should coordinate with this person to make sure - you're not duplicating effort, or trying something that's already - been rejected. +- Figure out who are the owners of the code you've been modifying. Look + at the top of the source files, inside the ``MAINTAINERS`` file, and + last of all in the ``CREDITS`` file. You should coordinate with these + people to make sure you're not duplicating effort, or trying something + that's already been rejected. - Make sure you put your name and EMail address at the top of any files - you create or mangle significantly. This is the first place people + Make sure you put your name and email address at the top of any files + you create or modify significantly. This is the first place people will look when they find a bug, or when **they** want to make a change. - Usually you want a configuration option for your kernel hack. Edit @@ -748,11 +748,11 @@ make a neat patch, there's administrative work to be done: can usually just add a "obj-$(CONFIG_xxx) += xxx.o" line. The syntax is documented in ``Documentation/kbuild/makefiles.rst``. -- Put yourself in ``CREDITS`` if you've done something noteworthy, - usually beyond a single file (your name should be at the top of the - source files anyway). ``MAINTAINERS`` means you want to be consulted - when changes are made to a subsystem, and hear about bugs; it implies - a more-than-passing commitment to some part of the code. +- Put yourself in ``CREDITS`` if you consider what you've done + noteworthy, usually beyond a single file (your name should be at the + top of the source files anyway). ``MAINTAINERS`` means you want to be + consulted when changes are made to a subsystem, and hear about bugs; + it implies a more-than-passing commitment to some part of the code. - Finally, don't forget to read ``Documentation/process/submitting-patches.rst`` and possibly diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst index 4cbd50edf277..6805ae6e86e6 100644 --- a/Documentation/kernel-hacking/locking.rst +++ b/Documentation/kernel-hacking/locking.rst @@ -941,8 +941,7 @@ lock. A classic problem here is when you provide callbacks or hooks: if you call these with the lock held, you risk simple deadlock, or a deadly -embrace (who knows what the callback will do?). Remember, the other -programmers are out to get you, so don't do this. +embrace (who knows what the callback will do?). Overzealous Prevention Of Deadlocks ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -952,8 +951,6 @@ grabs a read lock, searches a list, fails to find what it wants, drops the read lock, grabs a write lock and inserts the object has a race condition. -If you don't see why, please stay away from my code. - Racing Timers: A Kernel Pastime ------------------------------- diff --git a/Documentation/networking/device_drivers/appletalk/index.rst b/Documentation/networking/device_drivers/appletalk/index.rst index de7507f02037..c196baeb0856 100644 --- a/Documentation/networking/device_drivers/appletalk/index.rst +++ b/Documentation/networking/device_drivers/appletalk/index.rst @@ -9,7 +9,6 @@ Contents: :maxdepth: 2 cops - ltpc .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/appletalk/ltpc.rst b/Documentation/networking/device_drivers/appletalk/ltpc.rst deleted file mode 100644 index 0ad197fd17ce..000000000000 --- a/Documentation/networking/device_drivers/appletalk/ltpc.rst +++ /dev/null @@ -1,144 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=========== -LTPC Driver -=========== - -This is the ALPHA version of the ltpc driver. - -In order to use it, you will need at least version 1.3.3 of the -netatalk package, and the Apple or Farallon LocalTalk PC card. -There are a number of different LocalTalk cards for the PC; this -driver applies only to the one with the 65c02 processor chip on it. - -To include it in the kernel, select the CONFIG_LTPC switch in the -configuration dialog. You can also compile it as a module. - -While the driver will attempt to autoprobe the I/O port address, IRQ -line, and DMA channel of the card, this does not always work. For -this reason, you should be prepared to supply these parameters -yourself. (see "Card Configuration" below for how to determine or -change the settings on your card) - -When the driver is compiled into the kernel, you can add a line such -as the following to your /etc/lilo.conf:: - - append="ltpc=0x240,9,1" - -where the parameters (in order) are the port address, IRQ, and DMA -channel. The second and third values can be omitted, in which case -the driver will try to determine them itself. - -If you load the driver as a module, you can pass the parameters "io=", -"irq=", and "dma=" on the command line with insmod or modprobe, or add -them as options in a configuration file in /etc/modprobe.d/ directory:: - - alias lt0 ltpc # autoload the module when the interface is configured - options ltpc io=0x240 irq=9 dma=1 - -Before starting up the netatalk demons (perhaps in rc.local), you -need to add a line such as:: - - /sbin/ifconfig lt0 127.0.0.42 - -The address is unimportant - however, the card needs to be configured -with ifconfig so that Netatalk can find it. - -The appropriate netatalk configuration depends on whether you are -attached to a network that includes AppleTalk routers or not. If, -like me, you are simply connecting to your home Macintoshes and -printers, you need to set up netatalk to "seed". The way I do this -is to have the lines:: - - dummy -seed -phase 2 -net 2000 -addr 2000.26 -zone "1033" - lt0 -seed -phase 1 -net 1033 -addr 1033.27 -zone "1033" - -in my atalkd.conf. What is going on here is that I need to fool -netatalk into thinking that there are two AppleTalk interfaces -present; otherwise, it refuses to seed. This is a hack, and a more -permanent solution would be to alter the netatalk code. Also, make -sure you have the correct name for the dummy interface - If it's -compiled as a module, you will need to refer to it as "dummy0" or some -such. - -If you are attached to an extended AppleTalk network, with routers on -it, then you don't need to fool around with this -- the appropriate -line in atalkd.conf is:: - - lt0 -phase 1 - - -Card Configuration -================== - -The interrupts and so forth are configured via the dipswitch on the -board. Set the switches so as not to conflict with other hardware. - - Interrupts -- set at most one. If none are set, the driver uses - polled mode. Because the card was developed in the XT era, the - original documentation refers to IRQ2. Since you'll be running - this on an AT (or later) class machine, that really means IRQ9. - - === =========================================================== - SW1 IRQ 4 - SW2 IRQ 3 - SW3 IRQ 9 (2 in original card documentation only applies to XT) - === =========================================================== - - - DMA -- choose DMA 1 or 3, and set both corresponding switches. - - === ===== - SW4 DMA 3 - SW5 DMA 1 - SW6 DMA 3 - SW7 DMA 1 - === ===== - - - I/O address -- choose one. - - === ========= - SW8 220 / 240 - === ========= - - -IP -== - -Yes, it is possible to do IP over LocalTalk. However, you can't just -treat the LocalTalk device like an ordinary Ethernet device, even if -that's what it looks like to Netatalk. - -Instead, you follow the same procedure as for doing IP in EtherTalk. -See Documentation/networking/ipddp.rst for more information about the -kernel driver and userspace tools needed. - - -Bugs -==== - -IRQ autoprobing often doesn't work on a cold boot. To get around -this, either compile the driver as a module, or pass the parameters -for the card to the kernel as described above. - -Also, as usual, autoprobing is not recommended when you use the driver -as a module. (though it usually works at boot time, at least) - -Polled mode is *really* slow sometimes, but this seems to depend on -the configuration of the network. - -It may theoretically be possible to use two LTPC cards in the same -machine, but this is unsupported, so if you really want to do this, -you'll probably have to hack the initialization code a bit. - - -Thanks -====== - -Thanks to Alan Cox for helpful discussions early on in this -work, and to Denis Hainsworth for doing the bleeding-edge testing. - -Bradford Johnson <bradford@math.umn.edu> - -Updated 11/09/1998 by David Huggins-Daines <dhd@debian.org> diff --git a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst new file mode 100644 index 000000000000..40c92ea272af --- /dev/null +++ b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst @@ -0,0 +1,639 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +CTU CAN FD Driver +================= + +Author: Martin Jerabek <martin.jerabek01@gmail.com> + + +About CTU CAN FD IP Core +------------------------ + +`CTU CAN FD <https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core>`_ +is an open source soft core written in VHDL. +It originated in 2015 as Ondrej Ille's project +at the `Department of Measurement <https://meas.fel.cvut.cz/>`_ +of `FEE <http://www.fel.cvut.cz/en/>`_ at `CTU <https://www.cvut.cz/en>`_. + +The SocketCAN driver for Xilinx Zynq SoC based MicroZed board +`Vivado integration <https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top>`_ +and Intel Cyclone V 5CSEMA4U23C6 based DE0-Nano-SoC Terasic board +`QSys integration <https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd>`_ +has been developed as well as support for +`PCIe integration <https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd>`_ of the core. + +In the case of Zynq, the core is connected via the APB system bus, which does +not have enumeration support, and the device must be specified in Device Tree. +This kind of devices is called platform device in the kernel and is +handled by a platform device driver. + +The basic functional model of the CTU CAN FD peripheral has been +accepted into QEMU mainline. See QEMU `CAN emulation support <https://www.qemu.org/docs/master/system/devices/can.html>`_ +for CAN FD buses, host connection and CTU CAN FD core emulation. The development +version of emulation support can be cloned from ctu-canfd branch of QEMU local +development `repository <https://gitlab.fel.cvut.cz/canbus/qemu-canbus>`_. + + +About SocketCAN +--------------- + +SocketCAN is a standard common interface for CAN devices in the Linux +kernel. As the name suggests, the bus is accessed via sockets, similarly +to common network devices. The reasoning behind this is in depth +described in `Linux SocketCAN <https://www.kernel.org/doc/html/latest/networking/can.html>`_. +In short, it offers a +natural way to implement and work with higher layer protocols over CAN, +in the same way as, e.g., UDP/IP over Ethernet. + +Device probe +~~~~~~~~~~~~ + +Before going into detail about the structure of a CAN bus device driver, +let's reiterate how the kernel gets to know about the device at all. +Some buses, like PCI or PCIe, support device enumeration. That is, when +the system boots, it discovers all the devices on the bus and reads +their configuration. The kernel identifies the device via its vendor ID +and device ID, and if there is a driver registered for this identifier +combination, its probe method is invoked to populate the driver's +instance for the given hardware. A similar situation goes with USB, only +it allows for device hot-plug. + +The situation is different for peripherals which are directly embedded +in the SoC and connected to an internal system bus (AXI, APB, Avalon, +and others). These buses do not support enumeration, and thus the kernel +has to learn about the devices from elsewhere. This is exactly what the +Device Tree was made for. + +Device tree +~~~~~~~~~~~ + +An entry in device tree states that a device exists in the system, how +it is reachable (on which bus it resides) and its configuration – +registers address, interrupts and so on. An example of such a device +tree is given in . + +:: + + / { + /* ... */ + amba: amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + CTU_CAN_FD_0: CTU_CAN_FD@43c30000 { + compatible = "ctu,ctucanfd"; + interrupt-parent = <&intc>; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; + }; + }; + + +.. _sec:socketcan:drv: + +Driver structure +~~~~~~~~~~~~~~~~ + +The driver can be divided into two parts – platform-dependent device +discovery and set up, and platform-independent CAN network device +implementation. + +.. _sec:socketcan:platdev: + +Platform device driver +^^^^^^^^^^^^^^^^^^^^^^ + +In the case of Zynq, the core is connected via the AXI system bus, which +does not have enumeration support, and the device must be specified in +Device Tree. This kind of devices is called *platform device* in the +kernel and is handled by a *platform device driver*\ [1]_. + +A platform device driver provides the following things: + +- A *probe* function + +- A *remove* function + +- A table of *compatible* devices that the driver can handle + +The *probe* function is called exactly once when the device appears (or +the driver is loaded, whichever happens later). If there are more +devices handled by the same driver, the *probe* function is called for +each one of them. Its role is to allocate and initialize resources +required for handling the device, as well as set up low-level functions +for the platform-independent layer, e.g., *read_reg* and *write_reg*. +After that, the driver registers the device to a higher layer, in our +case as a *network device*. + +The *remove* function is called when the device disappears, or the +driver is about to be unloaded. It serves to free the resources +allocated in *probe* and to unregister the device from higher layers. + +Finally, the table of *compatible* devices states which devices the +driver can handle. The Device Tree entry ``compatible`` is matched +against the tables of all *platform drivers*. + +.. code:: c + + /* Match table for OF platform binding */ + static const struct of_device_id ctucan_of_match[] = { + { .compatible = "ctu,canfd-2", }, + { .compatible = "ctu,ctucanfd", }, + { /* end of list */ }, + }; + MODULE_DEVICE_TABLE(of, ctucan_of_match); + + static int ctucan_probe(struct platform_device *pdev); + static int ctucan_remove(struct platform_device *pdev); + + static struct platform_driver ctucanfd_driver = { + .probe = ctucan_probe, + .remove = ctucan_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = ctucan_of_match, + }, + }; + module_platform_driver(ctucanfd_driver); + + +.. _sec:socketcan:netdev: + +Network device driver +^^^^^^^^^^^^^^^^^^^^^ + +Each network device must support at least these operations: + +- Bring the device up: ``ndo_open`` + +- Bring the device down: ``ndo_close`` + +- Submit TX frames to the device: ``ndo_start_xmit`` + +- Signal TX completion and errors to the network subsystem: ISR + +- Submit RX frames to the network subsystem: ISR and NAPI + +There are two possible event sources: the device and the network +subsystem. Device events are usually signaled via an interrupt, handled +in an Interrupt Service Routine (ISR). Handlers for the events +originating in the network subsystem are then specified in +``struct net_device_ops``. + +When the device is brought up, e.g., by calling ``ip link set can0 up``, +the driver’s function ``ndo_open`` is called. It should validate the +interface configuration and configure and enable the device. The +analogous opposite is ``ndo_close``, called when the device is being +brought down, be it explicitly or implicitly. + +When the system should transmit a frame, it does so by calling +``ndo_start_xmit``, which enqueues the frame into the device. If the +device HW queue (FIFO, mailboxes or whatever the implementation is) +becomes full, the ``ndo_start_xmit`` implementation informs the network +subsystem that it should stop the TX queue (via ``netif_stop_queue``). +It is then re-enabled later in ISR when the device has some space +available again and is able to enqueue another frame. + +All the device events are handled in ISR, namely: + +#. **TX completion**. When the device successfully finishes transmitting + a frame, the frame is echoed locally. On error, an informative error + frame [2]_ is sent to the network subsystem instead. In both cases, + the software TX queue is resumed so that more frames may be sent. + +#. **Error condition**. If something goes wrong (e.g., the device goes + bus-off or RX overrun happens), error counters are updated, and + informative error frames are enqueued to SW RX queue. + +#. **RX buffer not empty**. In this case, read the RX frames and enqueue + them to SW RX queue. Usually NAPI is used as a middle layer (see ). + +.. _sec:socketcan:napi: + +NAPI +~~~~ + +The frequency of incoming frames can be high and the overhead to invoke +the interrupt service routine for each frame can cause significant +system load. There are multiple mechanisms in the Linux kernel to deal +with this situation. They evolved over the years of Linux kernel +development and enhancements. For network devices, the current standard +is NAPI – *the New API*. It is similar to classical top-half/bottom-half +interrupt handling in that it only acknowledges the interrupt in the ISR +and signals that the rest of the processing should be done in softirq +context. On top of that, it offers the possibility to *poll* for new +frames for a while. This has a potential to avoid the costly round of +enabling interrupts, handling an incoming IRQ in ISR, re-enabling the +softirq and switching context back to softirq. + +More detailed documentation of NAPI may be found on the pages of Linux +Foundation `<https://wiki.linuxfoundation.org/networking/napi>`_. + +Integrating the core to Xilinx Zynq +----------------------------------- + +The core interfaces a simple subset of the Avalon +(search for Intel **Avalon Interface Specifications**) +bus as it was originally used on +Alterra FPGA chips, yet Xilinx natively interfaces with AXI +(search for ARM **AMBA AXI and ACE Protocol Specification AXI3, +AXI4, and AXI4-Lite, ACE and ACE-Lite**). +The most obvious solution would be to use +an Avalon/AXI bridge or implement some simple conversion entity. +However, the core’s interface is half-duplex with no handshake +signaling, whereas AXI is full duplex with two-way signaling. Moreover, +even AXI-Lite slave interface is quite resource-intensive, and the +flexibility and speed of AXI are not required for a CAN core. + +Thus a much simpler bus was chosen – APB (Advanced Peripheral Bus) +(search for ARM **AMBA APB Protocol Specification**). +APB-AXI bridge is directly available in +Xilinx Vivado, and the interface adaptor entity is just a few simple +combinatorial assignments. + +Finally, to be able to include the core in a block diagram as a custom +IP, the core, together with the APB interface, has been packaged as a +Vivado component. + +CTU CAN FD Driver design +------------------------ + +The general structure of a CAN device driver has already been examined +in . The next paragraphs provide a more detailed description of the CTU +CAN FD core driver in particular. + +Low-level driver +~~~~~~~~~~~~~~~~ + +The core is not intended to be used solely with SocketCAN, and thus it +is desirable to have an OS-independent low-level driver. This low-level +driver can then be used in implementations of OS driver or directly +either on bare metal or in a user-space application. Another advantage +is that if the hardware slightly changes, only the low-level driver +needs to be modified. + +The code [3]_ is in part automatically generated and in part written +manually by the core author, with contributions of the thesis’ author. +The low-level driver supports operations such as: set bit timing, set +controller mode, enable/disable, read RX frame, write TX frame, and so +on. + +Configuring bit timing +~~~~~~~~~~~~~~~~~~~~~~ + +On CAN, each bit is divided into four segments: SYNC, PROP, PHASE1, and +PHASE2. Their duration is expressed in multiples of a Time Quantum +(details in `CAN Specification, Version 2.0 <http://esd.cs.ucr.edu/webres/can20.pdf>`_, chapter 8). +When configuring +bitrate, the durations of all the segments (and time quantum) must be +computed from the bitrate and Sample Point. This is performed +independently for both the Nominal bitrate and Data bitrate for CAN FD. + +SocketCAN is fairly flexible and offers either highly customized +configuration by setting all the segment durations manually, or a +convenient configuration by setting just the bitrate and sample point +(and even that is chosen automatically per Bosch recommendation if not +specified). However, each CAN controller may have different base clock +frequency and different width of segment duration registers. The +algorithm thus needs the minimum and maximum values for the durations +(and clock prescaler) and tries to optimize the numbers to fit both the +constraints and the requested parameters. + +.. code:: c + + struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segment 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segment 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; + }; + + +[lst:can_bittiming_const] + +A curious reader will notice that the durations of the segments PROP_SEG +and PHASE_SEG1 are not determined separately but rather combined and +then, by default, the resulting TSEG1 is evenly divided between PROP_SEG +and PHASE_SEG1. In practice, this has virtually no consequences as the +sample point is between PHASE_SEG1 and PHASE_SEG2. In CTU CAN FD, +however, the duration registers ``PROP`` and ``PH1`` have different +widths (6 and 7 bits, respectively), so the auto-computed values might +overflow the shorter register and must thus be redistributed among the +two [4]_. + +Handling RX +~~~~~~~~~~~ + +Frame reception is handled in NAPI queue, which is enabled from ISR when +the RXNE (RX FIFO Not Empty) bit is set. Frames are read one by one +until either no frame is left in the RX FIFO or the maximum work quota +has been reached for the NAPI poll run (see ). Each frame is then passed +to the network interface RX queue. + +An incoming frame may be either a CAN 2.0 frame or a CAN FD frame. The +way to distinguish between these two in the kernel is to allocate either +``struct can_frame`` or ``struct canfd_frame``, the two having different +sizes. In the controller, the information about the frame type is stored +in the first word of RX FIFO. + +This brings us a chicken-egg problem: we want to allocate the ``skb`` +for the frame, and only if it succeeds, fetch the frame from FIFO; +otherwise keep it there for later. But to be able to allocate the +correct ``skb``, we have to fetch the first work of FIFO. There are +several possible solutions: + +#. Read the word, then allocate. If it fails, discard the rest of the + frame. When the system is low on memory, the situation is bad anyway. + +#. Always allocate ``skb`` big enough for an FD frame beforehand. Then + tweak the ``skb`` internals to look like it has been allocated for + the smaller CAN 2.0 frame. + +#. Add option to peek into the FIFO instead of consuming the word. + +#. If the allocation fails, store the read word into driver’s data. On + the next try, use the stored word instead of reading it again. + +Option 1 is simple enough, but not very satisfying if we could do +better. Option 2 is not acceptable, as it would require modifying the +private state of an integral kernel structure. The slightly higher +memory consumption is just a virtual cherry on top of the “cakeâ€. Option +3 requires non-trivial HW changes and is not ideal from the HW point of +view. + +Option 4 seems like a good compromise, with its disadvantage being that +a partial frame may stay in the FIFO for a prolonged time. Nonetheless, +there may be just one owner of the RX FIFO, and thus no one else should +see the partial frame (disregarding some exotic debugging scenarios). +Basides, the driver resets the core on its initialization, so the +partial frame cannot be “adopted†either. In the end, option 4 was +selected [5]_. + +.. _subsec:ctucanfd:rxtimestamp: + +Timestamping RX frames +^^^^^^^^^^^^^^^^^^^^^^ + +The CTU CAN FD core reports the exact timestamp when the frame has been +received. The timestamp is by default captured at the sample point of +the last bit of EOF but is configurable to be captured at the SOF bit. +The timestamp source is external to the core and may be up to 64 bits +wide. At the time of writing, passing the timestamp from kernel to +userspace is not yet implemented, but is planned in the future. + +Handling TX +~~~~~~~~~~~ + +The CTU CAN FD core has 4 independent TX buffers, each with its own +state and priority. When the core wants to transmit, a TX buffer in +Ready state with the highest priority is selected. + +The priorities are 3bit numbers in register TX_PRIORITY +(nibble-aligned). This should be flexible enough for most use cases. +SocketCAN, however, supports only one FIFO queue for outgoing +frames [6]_. The buffer priorities may be used to simulate the FIFO +behavior by assigning each buffer a distinct priority and *rotating* the +priorities after a frame transmission is completed. + +In addition to priority rotation, the SW must maintain head and tail +pointers into the FIFO formed by the TX buffers to be able to determine +which buffer should be used for next frame (``txb_head``) and which +should be the first completed one (``txb_tail``). The actual buffer +indices are (obviously) modulo 4 (number of TX buffers), but the +pointers must be at least one bit wider to be able to distinguish +between FIFO full and FIFO empty – in this situation, +:math:`txb\_head \equiv txb\_tail\ (\textrm{mod}\ 4)`. An example of how +the FIFO is maintained, together with priority rotation, is depicted in + +| + ++------+---+---+---+---+ +| TXB# | 0 | 1 | 2 | 3 | ++======+===+===+===+===+ +| Seq | A | B | C | | ++------+---+---+---+---+ +| Prio | 7 | 6 | 5 | 4 | ++------+---+---+---+---+ +| | | T | | H | ++------+---+---+---+---+ + +| + ++------+---+---+---+---+ +| TXB# | 0 | 1 | 2 | 3 | ++======+===+===+===+===+ +| Seq | | B | C | | ++------+---+---+---+---+ +| Prio | 4 | 7 | 6 | 5 | ++------+---+---+---+---+ +| | | T | | H | ++------+---+---+---+---+ + +| + ++------+---+---+---+---+----+ +| TXB# | 0 | 1 | 2 | 3 | 0’ | ++======+===+===+===+===+====+ +| Seq | E | B | C | D | | ++------+---+---+---+---+----+ +| Prio | 4 | 7 | 6 | 5 | | ++------+---+---+---+---+----+ +| | | T | | | H | ++------+---+---+---+---+----+ + +| + +.. kernel-figure:: fsm_txt_buffer_user.svg + + TX Buffer states with possible transitions + +.. _subsec:ctucanfd:txtimestamp: + +Timestamping TX frames +^^^^^^^^^^^^^^^^^^^^^^ + +When submitting a frame to a TX buffer, one may specify the timestamp at +which the frame should be transmitted. The frame transmission may start +later, but not sooner. Note that the timestamp does not participate in +buffer prioritization – that is decided solely by the mechanism +described above. + +Support for time-based packet transmission was recently merged to Linux +v4.19 `Time-based packet transmission <https://lwn.net/Articles/748879/>`_, +but it remains yet to be researched +whether this functionality will be practical for CAN. + +Also similarly to retrieving the timestamp of RX frames, the core +supports retrieving the timestamp of TX frames – that is the time when +the frame was successfully delivered. The particulars are very similar +to timestamping RX frames and are described in . + +Handling RX buffer overrun +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When a received frame does no more fit into the hardware RX FIFO in its +entirety, RX FIFO overrun flag (STATUS[DOR]) is set and Data Overrun +Interrupt (DOI) is triggered. When servicing the interrupt, care must be +taken first to clear the DOR flag (via COMMAND[CDO]) and after that +clear the DOI interrupt flag. Otherwise, the interrupt would be +immediately [7]_ rearmed. + +**Note**: During development, it was discussed whether the internal HW +pipelining cannot disrupt this clear sequence and whether an additional +dummy cycle is necessary between clearing the flag and the interrupt. On +the Avalon interface, it indeed proved to be the case, but APB being +safe because it uses 2-cycle transactions. Essentially, the DOR flag +would be cleared, but DOI register’s Preset input would still be high +the cycle when the DOI clear request would also be applied (by setting +the register’s Reset input high). As Set had higher priority than Reset, +the DOI flag would not be reset. This has been already fixed by swapping +the Set/Reset priority (see issue #187). + +Reporting Error Passive and Bus Off conditions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It may be desirable to report when the node reaches *Error Passive*, +*Error Warning*, and *Bus Off* conditions. The driver is notified about +error state change by an interrupt (EPI, EWLI), and then proceeds to +determine the core’s error state by reading its error counters. + +There is, however, a slight race condition here – there is a delay +between the time when the state transition occurs (and the interrupt is +triggered) and when the error counters are read. When EPI is received, +the node may be either *Error Passive* or *Bus Off*. If the node goes +*Bus Off*, it obviously remains in the state until it is reset. +Otherwise, the node is *or was* *Error Passive*. However, it may happen +that the read state is *Error Warning* or even *Error Active*. It may be +unclear whether and what exactly to report in that case, but I +personally entertain the idea that the past error condition should still +be reported. Similarly, when EWLI is received but the state is later +detected to be *Error Passive*, *Error Passive* should be reported. + + +CTU CAN FD Driver Sources Reference +----------------------------------- + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd.h + :internal: + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_base.c + :internal: + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_pci.c + :internal: + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_platform.c + :internal: + +CTU CAN FD IP Core and Driver Development Acknowledgment +--------------------------------------------------------- + +* Odrej Ille <ondrej.ille@gmail.com> + + * started the project as student at Department of Measurement, FEE, CTU + * invested great amount of personal time and enthusiasm to the project over years + * worked on more funded tasks + +* `Department of Measurement <https://meas.fel.cvut.cz/>`_, + `Faculty of Electrical Engineering <http://www.fel.cvut.cz/en/>`_, + `Czech Technical University <https://www.cvut.cz/en>`_ + + * is the main investor into the project over many years + * uses project in their CAN/CAN FD diagnostics framework for `Skoda Auto <https://www.skoda-auto.cz/>`_ + +* `Digiteq Automotive <https://www.digiteqautomotive.com/en>`_ + + * funding of the project CAN FD Open Cores Support Linux Kernel Based Systems + * negotiated and paid CTU to allow public access to the project + * provided additional funding of the work + +* `Department of Control Engineering <https://control.fel.cvut.cz/en>`_, + `Faculty of Electrical Engineering <http://www.fel.cvut.cz/en/>`_, + `Czech Technical University <https://www.cvut.cz/en>`_ + + * solving the project CAN FD Open Cores Support Linux Kernel Based Systems + * providing GitLab management + * virtual servers and computational power for continuous integration + * providing hardware for HIL continuous integration tests + +* `PiKRON Ltd. <http://pikron.com/>`_ + + * minor funding to initiate preparation of the project open-sourcing + +* Petr Porazil <porazil@pikron.com> + + * design of PCIe transceiver addon board and assembly of boards + * design and assembly of MZ_APO baseboard for MicroZed/Zynq based system + +* Martin Jerabek <martin.jerabek01@gmail.com> + + * Linux driver development + * continuous integration platform architect and GHDL updates + * theses `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_ + +* Jiri Novak <jnovak@fel.cvut.cz> + + * project initiation, management and use at Department of Measurement, FEE, CTU + +* Pavel Pisa <pisa@cmp.felk.cvut.cz> + + * initiate open-sourcing, project coordination, management at Department of Control Engineering, FEE, CTU + +* Jaroslav Beran<jara.beran@gmail.com> + + * system integration for Intel SoC, core and driver testing and updates + +* Carsten Emde (`OSADL <https://www.osadl.org/>`_) + + * provided OSADL expertise to discuss IP core licensing + * pointed to possible deadlock for LGPL and CAN bus possible patent case which lead to relicense IP core design to BSD like license + +* Reiner Zitzmann and Holger Zeltwanger (`CAN in Automation <https://www.can-cia.org/>`_) + + * provided suggestions and help to inform community about the project and invited us to events focused on CAN bus future development directions + +* Jan Charvat + + * implemented CTU CAN FD functional model for QEMU which has been integrated into QEMU mainline (`docs/system/devices/can.rst <https://www.qemu.org/docs/master/system/devices/can.html>`_) + * Bachelor theses Model of CAN FD Communication Controller for QEMU Emulator + +Notes +----- + + +.. [1] + Other buses have their own specific driver interface to set up the + device. + +.. [2] + Not to be mistaken with CAN Error Frame. This is a ``can_frame`` with + ``CAN_ERR_FLAG`` set and some error info in its ``data`` field. + +.. [3] + Available in CTU CAN FD repository + `<https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core>`_ + +.. [4] + As is done in the low-level driver functions + ``ctucan_hw_set_nom_bittiming`` and + ``ctucan_hw_set_data_bittiming``. + +.. [5] + At the time of writing this thesis, option 1 is still being used and + the modification is queued in gitlab issue #222 + +.. [6] + Strictly speaking, multiple CAN TX queues are supported since v4.19 + `can: enable multi-queue for SocketCAN devices <https://lore.kernel.org/patchwork/patch/913526/>`_ but no mainline driver is using + them yet. + +.. [7] + Or rather in the next clock cycle diff --git a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg new file mode 100644 index 000000000000..b371650788f4 --- /dev/null +++ b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg @@ -0,0 +1,151 @@ +<?xml version="1.0" encoding="UTF-8"?> +<svg width="113.611mm" height="86.6873mm" version="1.1" viewBox="0 0 113.611 86.6873" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"> + <defs> + <marker id="marker3667" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3517" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3373" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3199" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3037" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker2779" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker2477" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker2074" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker1964" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker1856" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="Arrow2Mend" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <filter id="filter1204" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <marker id="marker2074-3" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <filter id="filter1204-6" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-9" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-4" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-1" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-1-3" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-1-3-1" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + </defs> + <metadata> + <rdf:RDF> + <cc:Work rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/> + <dc:title/> + </cc:Work> + </rdf:RDF> + </metadata> + <g transform="translate(-49.0277 -104.823)"> + <g> + <path d="m130.534 165.429h-71.1816v-17.5315" fill="none" marker-end="url(#marker2477)" stroke="#28a4ff" stroke-width=".6"/> + <path d="m145.034 122.959v-11.5914h-43.1215" fill="none" marker-end="url(#marker3037)" stroke="#28a4ff" stroke-width=".6"/> + <rect x="130.679" y="122.933" width="28.2965" height="45.2319" rx="0" ry="0" fill="#e5e5e5" stroke="#717171" stroke-linecap="square" stroke-width=".499999"/> + <path d="m102.044 116.236h23.3126l-0.13388 18.8185h19.9383v3.66603" fill="none" marker-end="url(#marker3199)" stroke="#28a4ff" stroke-width=".6"/> + <path d="m59.5006 138.391v-24.2517h20.6338" fill="none" marker-end="url(#marker2779)" stroke="#28a4ff" stroke-width=".6"/> + <rect x="78.1389" y="126.411" width="28.0037" height="35.0443" rx="0" ry="0" fill="#e5e5e5" stroke="#717171" stroke-linecap="square" stroke-width=".5"/> + </g> + <g fill="#ffcb35" stroke="#000" stroke-linecap="square"> + <ellipse cx="92.1408" cy="114.239" rx="10.8866" ry="4.39308" stroke-width=".5"/> + <ellipse cx="92.1408" cy="134.185" rx="10.8866" ry="4.39308" stroke-width=".499999"/> + <ellipse cx="92.1408" cy="152.199" rx="10.8866" ry="4.39308" stroke-width=".499999"/> + </g> + <g fill="#28a4ff" stroke="#000" stroke-linecap="square" stroke-width=".499999"> + <ellipse cx="144.827" cy="143.316" rx="10.8866" ry="4.39308"/> + <ellipse cx="144.827" cy="159.143" rx="10.8866" ry="4.39308"/> + <ellipse cx="59.4364" cy="142.823" rx="7.36455" ry="4.39308"/> + <ellipse cx="144.827" cy="129.196" rx="10.8866" ry="4.39308"/> + <ellipse cx="143.077" cy="180.53" rx="10.8866" ry="4.39308"/> + </g> + <ellipse cx="110.386" cy="180.53" rx="10.8866" ry="4.39308" fill="#ffcb35" stroke="#000" stroke-linecap="square" stroke-width=".499999"/> + <text x="110.90907" y="179.42688" font-size="3.175px" xml:space="preserve"><tspan x="110.90907" y="179.42688" dy="0.60000002" text-align="center" text-anchor="middle">Accessible</tspan><tspan x="110.90907" y="183.39563"><tspan font-size="3.175px" text-align="center" text-anchor="middle">for S</tspan>W</tspan></text> + <text x="143.5869" y="179.52795" xml:space="preserve"><tspan x="143.5869" y="179.52795" dy="1 0 0 0 0 0" font-family="sans-serif" font-size="2.82222px" text-align="center" text-anchor="middle" style="font-variant-caps:normal;font-variant-east-asian:normal;font-variant-ligatures:normal;font-variant-numeric:normal">Inaccessible</tspan><tspan x="143.5869" y="183.36786" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">for S</tspan>W</tspan></text> + <g font-size="3.175px"> + <text x="91.95018" y="115.29005" xml:space="preserve"><tspan x="91.95018" y="115.29005" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Ready</tspan></tspan></text> + <text x="145.25127" y="130.49019" xml:space="preserve"><tspan x="145.25127" y="130.49019" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX OK</tspan></tspan></text> + <text x="145.31845" y="144.43121" xml:space="preserve"><tspan x="145.31845" y="144.43121" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Aborted</tspan></tspan></text> + <text x="145.40399" y="160.36035" xml:space="preserve"><tspan x="145.40399" y="160.36035" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX failed</tspan></tspan></text> + <text x="91.823967" y="133.53941" text-align="center" text-anchor="middle" style="line-height:0.9" xml:space="preserve"><tspan x="91.823967" y="133.53941" text-align="center"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX in</tspan></tspan><tspan x="91.823967" y="136.39691" text-align="center">progress</tspan></text> + <text x="91.648918" y="151.84813" text-align="center" text-anchor="middle" style="line-height:0.9" xml:space="preserve"><tspan x="91.648918" y="151.84813" text-align="center"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Abort in</tspan></tspan><tspan x="91.648918" y="154.70563" text-align="center">progress</tspan></text> + <text x="59.456043" y="143.91658" xml:space="preserve"><tspan x="59.456043" y="143.91658" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Empty</tspan></tspan></text> + </g> + <g fill="none"> + <g stroke="#000"> + <rect x="52.3943" y="171.63" width="106.581" height="16.601" rx="0" ry="0" stroke-linecap="square" stroke-width=".499999"/> + <g stroke-width=".6"> + <path d="m106.383 159.046h26.4967" marker-end="url(#Arrow2Mend)"/> + <path d="m103.138 152.268h41.5564v-3.92426" marker-end="url(#marker1856)"/> + <path d="m106.38 129.354h17.7785"/> + <path d="m125.818 129.359h7.2418" marker-end="url(#marker1964)"/> + </g> + <path d="m124.169 129.354a0.959514 0.97091 0 0 1 0.47587-0.84557 0.959514 0.97091 0 0 1 0.96164-3e-3 0.959514 0.97091 0 0 1 0.48149 0.84231" stroke-linecap="square" stroke-width=".600001"/> + <path d="m55.7026 180.832h34.8131" marker-end="url(#marker2074)" stroke-width=".6"/> + </g> + <g> + <path d="m55.6464 185.744h34.8131" marker-end="url(#marker2074-3)" stroke="#28a4ff" stroke-width=".600001"/> + <g stroke-width=".6"> + <path d="m94.0487 129.889v-10.6493" marker-end="url(#marker3373)" stroke="#000"/> + <path d="m89.7534 118.621v10.662" marker-end="url(#marker3517)" stroke="#000"/> + <path d="m92.119 138.812v7.9718" marker-end="url(#marker3667)" stroke="#28a4ff"/> + </g> + </g> + </g> + <text transform="matrix(.264583 0 0 .264583 91.8919 139.964)" x="26.959213" y="9.11724" fill="#2aa1ff" filter="url(#filter1204-6-2-9-1-3-1)" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="26.959213" y="9.11724" text-align="center">Set</tspan><tspan x="26.959213" y="22.31724" text-align="center">abort</tspan></text> + <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccesfull</tspan></text> + <g font-size="12px" stroke-width="3.77953" text-anchor="middle"> + <text transform="matrix(.264583 0 0 .264583 68.5988 118.913)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">starts</tspan></text> + <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">succesfull</tspan></text> + <text transform="matrix(.264583 0 0 .264583 107.77 145.476)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">sborted</tspan></text> + </g> + <g stroke-width="3.77953" text-anchor="middle"> + <text transform="matrix(.264583 0 0 .264583 107.574 155.948)" x="38.824219" y="9.1171875" filter="url(#filter1204)" font-size="10.6667px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Retransmit</tspan><tspan x="38.824219" y="20.850557" text-align="center">limit reached or</tspan><tspan x="38.824219" y="32.583927" text-align="center">node went bus off</tspan><tspan x="38.824219" y="44.317299" text-align="center"/></text> + <text transform="matrix(.264583 0 0 .264583 60.7127 177.384)" x="38.824539" y="9.1173134" filter="url(#filter1204-6)" font-size="12px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824539" y="9.1173134" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Transmission result</tspan></text> + <text transform="matrix(.264583 0 0 .264583 45.6885 173.226)" x="57.727047" y="9.11724" filter="url(#filter1204-6-9)" font-size="12px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="57.727047" y="9.11724" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Legend:</tspan></text> + </g> + <g fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-anchor="middle"> + <text transform="matrix(.264583 0 0 .264583 57.0045 182.079)" x="57.727047" y="9.11724" filter="url(#filter1204-6-2)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="57.727047" y="9.11724" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">SW command</tspan></text> + <text transform="matrix(.264583 0 0 .264583 57.7865 110.104)" x="40.822609" y="9.11724" filter="url(#filter1204-6-2-9)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="40.822609" y="9.11724" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set ready</tspan></text> + <text transform="matrix(.264583 0 0 .264583 116.893 107.491)" x="28.049065" y="9.1172523" filter="url(#filter1204-6-2-9-4)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="28.049065" y="9.1172523" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set ready</tspan></text> + <text transform="matrix(.264583 0 0 .264583 87.5687 166.324)" x="28.049065" y="9.1172523" filter="url(#filter1204-6-2-9-1)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="28.049065" y="9.1172523" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set empty</tspan></text> + <text transform="matrix(.264583 0 0 .264583 106.53 113.074)" x="30.228771" y="8.9063139" filter="url(#filter1204-6-2-9-1-3)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="30.228771" y="8.9063139" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set abort</tspan></text> + </g> + </g> +</svg> diff --git a/Documentation/networking/device_drivers/can/index.rst b/Documentation/networking/device_drivers/can/index.rst index 58b6e0ad3030..0c3cc6633559 100644 --- a/Documentation/networking/device_drivers/can/index.rst +++ b/Documentation/networking/device_drivers/can/index.rst @@ -10,6 +10,7 @@ Contents: .. toctree:: :maxdepth: 2 + ctu/ctucanfd-driver freescale/flexcan .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst b/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst deleted file mode 100644 index e03e9c631879..000000000000 --- a/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst +++ /dev/null @@ -1,189 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=================================== -DEC EtherWORKS Ethernet De4x5 cards -=================================== - - Originally, this driver was written for the Digital Equipment - Corporation series of EtherWORKS Ethernet cards: - - - DE425 TP/COAX EISA - - DE434 TP PCI - - DE435 TP/COAX/AUI PCI - - DE450 TP/COAX/AUI PCI - - DE500 10/100 PCI Fasternet - - but it will now attempt to support all cards which conform to the - Digital Semiconductor SROM Specification. The driver currently - recognises the following chips: - - - DC21040 (no SROM) - - DC21041[A] - - DC21140[A] - - DC21142 - - DC21143 - - So far the driver is known to work with the following cards: - - - KINGSTON - - Linksys - - ZNYX342 - - SMC8432 - - SMC9332 (w/new SROM) - - ZNYX31[45] - - ZNYX346 10/100 4 port (can act as a 10/100 bridge!) - - The driver has been tested on a relatively busy network using the DE425, - DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred - 16M of data to a DECstation 5000/200 as follows:: - - TCP UDP - TX RX TX RX - DE425 1030k 997k 1170k 1128k - DE434 1063k 995k 1170k 1125k - DE435 1063k 995k 1170k 1125k - DE500 1063k 998k 1170k 1125k in 10Mb/s mode - - All values are typical (in kBytes/sec) from a sample of 4 for each - measurement. Their error is +/-20k on a quiet (private) network and also - depend on what load the CPU has. - ----------------------------------------------------------------------------- - - The ability to load this driver as a loadable module has been included - and used extensively during the driver development (to save those long - reboot sequences). Loadable module support under PCI and EISA has been - achieved by letting the driver autoprobe as if it were compiled into the - kernel. Do make sure you're not sharing interrupts with anything that - cannot accommodate interrupt sharing! - - To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy de4x5.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) for fixed autoprobes (not recommended), edit the source code near - line 5594 to reflect the I/O address you're using, or assign these when - loading by:: - - insmod de4x5 io=0xghh where g = bus number - hh = device number - - .. note:: - - autoprobing for modules is now supported by default. You may just - use:: - - insmod de4x5 - - to load all available boards. For a specific board, still use - the 'io=?' above. - 3) compile de4x5.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the de4x5 configuration turned off and reboot. - 5) insmod de4x5 [io=0xghh] - 6) run the net startup bits for your new eth?? interface(s) manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - To unload a module, turn off the associated interface(s) - 'ifconfig eth?? down' then 'rmmod de4x5'. - - Automedia detection is included so that in principle you can disconnect - from, e.g. TP, reconnect to BNC and things will still work (after a - pause while the driver figures out where its media went). My tests - using ping showed that it appears to work.... - - By default, the driver will now autodetect any DECchip based card. - Should you have a need to restrict the driver to DIGITAL only cards, you - can compile with a DEC_ONLY define, or if loading as a module, use the - 'dec_only=1' parameter. - - I've changed the timing routines to use the kernel timer and scheduling - functions so that the hangs and other assorted problems that occurred - while autosensing the media should be gone. A bonus for the DC21040 - auto media sense algorithm is that it can now use one that is more in - line with the rest (the DC21040 chip doesn't have a hardware timer). - The downside is the 1 'jiffies' (10ms) resolution. - - IEEE 802.3u MII interface code has been added in anticipation that some - products may use it in the future. - - The SMC9332 card has a non-compliant SROM which needs fixing - I have - patched this driver to detect it because the SROM format used complies - to a previous DEC-STD format. - - I have removed the buffer copies needed for receive on Intels. I cannot - remove them for Alphas since the Tulip hardware only does longword - aligned DMA transfers and the Alphas get alignment traps with non - longword aligned data copies (which makes them really slow). No comment. - - I have added SROM decoding routines to make this driver work with any - card that supports the Digital Semiconductor SROM spec. This will help - all cards running the dc2114x series chips in particular. Cards using - the dc2104x chips should run correctly with the basic driver. I'm in - debt to <mjacob@feral.com> for the testing and feedback that helped get - this feature working. So far we have tested KINGSTON, SMC8432, SMC9332 - (with the latest SROM complying with the SROM spec V3: their first was - broken), ZNYX342 and LinkSys. ZNYX314 (dual 21041 MAC) and ZNYX 315 - (quad 21041 MAC) cards also appear to work despite their incorrectly - wired IRQs. - - I have added a temporary fix for interrupt problems when some SCSI cards - share the same interrupt as the DECchip based cards. The problem occurs - because the SCSI card wants to grab the interrupt as a fast interrupt - (runs the service routine with interrupts turned off) vs. this card - which really needs to run the service routine with interrupts turned on. - This driver will now add the interrupt service routine as a fast - interrupt if it is bounced from the slow interrupt. THIS IS NOT A - RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time - until people sort out their compatibility issues and the kernel - interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST - INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not - run on the same interrupt. PCMCIA/CardBus is another can of worms... - - Finally, I think I have really fixed the module loading problem with - more than one DECchip based card. As a side effect, I don't mess with - the device structure any more which means that if more than 1 card in - 2.0.x is installed (4 in 2.1.x), the user will have to edit - linux/drivers/net/Space.c to make room for them. Hence, module loading - is the preferred way to use this driver, since it doesn't have this - limitation. - - Where SROM media detection is used and full duplex is specified in the - SROM, the feature is ignored unless lp->params.fdx is set at compile - time OR during a module load (insmod de4x5 args='eth??:fdx' [see - below]). This is because there is no way to automatically detect full - duplex links except through autonegotiation. When I include the - autonegotiation feature in the SROM autoconf code, this detection will - occur automatically for that case. - - Command line arguments are now allowed, similar to passing arguments - through LILO. This will allow a per adapter board set up of full duplex - and media. The only lexical constraints are: the board name (dev->name) - appears in the list before its parameters. The list of parameters ends - either at the end of the parameter list or with another board name. The - following parameters are allowed: - - ========= =============================================== - fdx for full duplex - autosense to set the media/speed; with the following - sub-parameters: - TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO - ========= =============================================== - - Case sensitivity is important for the sub-parameters. They *must* be - upper case. Examples:: - - insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. - - For a compiled in driver, in linux/drivers/net/CONFIG, place e.g.:: - - DE4X5_OPTS = -DDE4X5_PARM='"eth0:fdx autosense=AUI eth2:autosense=TP"' - - Yes, I know full duplex isn't permissible on BNC or AUI; they're just - examples. By default, full duplex is turned off and AUTO is the default - autosense setting. In reality, I expect only the full duplex option to - be used. Note the use of single quotes in the two examples above and the - lack of commas to separate items. diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 6b5dc203da2b..4e06684d079b 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -19,7 +19,6 @@ Contents: cirrus/cs89x0 dlink/dl2k davicom/dm9000 - dec/de4x5 dec/dmfe freescale/dpaa freescale/dpaa2/index @@ -39,6 +38,7 @@ Contents: intel/iavf intel/ice marvell/octeontx2 + marvell/octeon_ep mellanox/mlx5 microsoft/netvsc neterion/s2io diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst new file mode 100644 index 000000000000..bc562c49011b --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +==================================================================== +Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC +==================================================================== + +Network driver for Marvell's Octeon PCI EndPoint NIC. +Copyright (c) 2020 Marvell International Ltd. + +Contents +======== + +- `Overview`_ +- `Supported Devices`_ +- `Interface Control`_ + +Overview +======== +This driver implements networking functionality of Marvell's Octeon PCI +EndPoint NIC. + +Supported Devices +================= +Currently, this driver support following devices: + * Network controller: Cavium, Inc. Device b200 + +Interface Control +================= +Network Interface control like changing mtu, link speed, link down/up are +done by writing command to mailbox command queue, a mailbox interface +implemented through a reserved region in BAR4. +This driver writes the commands into the mailbox and the firmware on the +Octeon device processes them. The firmware also sends unsolicited notifications +to driver for events suchs as link change, through notification queue +implemented as part of mailbox interface. diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index 5f5cfdb2a300..601eacaf12f3 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -17,7 +17,6 @@ Contents: fddi/index hamradio/index qlogic/index - wan/index wifi/index wwan/index diff --git a/Documentation/networking/device_drivers/wan/index.rst b/Documentation/networking/device_drivers/wan/index.rst deleted file mode 100644 index 9d9ae94f00b4..000000000000 --- a/Documentation/networking/device_drivers/wan/index.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - -Classic WAN Device Drivers -========================== - -Contents: - -.. toctree:: - :maxdepth: 2 - - z8530book - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/networking/device_drivers/wan/z8530book.rst b/Documentation/networking/device_drivers/wan/z8530book.rst deleted file mode 100644 index fea2c40e7973..000000000000 --- a/Documentation/networking/device_drivers/wan/z8530book.rst +++ /dev/null @@ -1,256 +0,0 @@ -======================= -Z8530 Programming Guide -======================= - -:Author: Alan Cox - -Introduction -============ - -The Z85x30 family synchronous/asynchronous controller chips are used on -a large number of cheap network interface cards. The kernel provides a -core interface layer that is designed to make it easy to provide WAN -services using this chip. - -The current driver only support synchronous operation. Merging the -asynchronous driver support into this code to allow any Z85x30 device to -be used as both a tty interface and as a synchronous controller is a -project for Linux post the 2.4 release - -Driver Modes -============ - -The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices in -three different modes. Each mode can be applied to an individual channel -on the chip (each chip has two channels). - -The PIO synchronous mode supports the most common Z8530 wiring. Here the -chip is interface to the I/O and interrupt facilities of the host -machine but not to the DMA subsystem. When running PIO the Z8530 has -extremely tight timing requirements. Doing high speeds, even with a -Z85230 will be tricky. Typically you should expect to achieve at best -9600 baud with a Z8C530 and 64Kbits with a Z85230. - -The DMA mode supports the chip when it is configured to use dual DMA -channels on an ISA bus. The better cards tend to support this mode of -operation for a single channel. With DMA running the Z85230 tops out -when it starts to hit ISA DMA constraints at about 512Kbits. It is worth -noting here that many PC machines hang or crash when the chip is driven -fast enough to hold the ISA bus solid. - -Transmit DMA mode uses a single DMA channel. The DMA channel is used for -transmission as the transmit FIFO is smaller than the receive FIFO. it -gives better performance than pure PIO mode but is nowhere near as ideal -as pure DMA mode. - -Using the Z85230 driver -======================= - -The Z85230 driver provides the back end interface to your board. To -configure a Z8530 interface you need to detect the board and to identify -its ports and interrupt resources. It is also your problem to verify the -resources are available. - -Having identified the chip you need to fill in a struct z8530_dev, -which describes each chip. This object must exist until you finally -shutdown the board. Firstly zero the active field. This ensures nothing -goes off without you intending it. The irq field should be set to the -interrupt number of the chip. (Each chip has a single interrupt source -rather than each channel). You are responsible for allocating the -interrupt line. The interrupt handler should be set to -:c:func:`z8530_interrupt()`. The device id should be set to the -z8530_dev structure pointer. Whether the interrupt can be shared or not -is board dependent, and up to you to initialise. - -The structure holds two channel structures. Initialise chanA.ctrlio and -chanA.dataio with the address of the control and data ports. You can or -this with Z8530_PORT_SLEEP to indicate your interface needs the 5uS -delay for chip settling done in software. The PORT_SLEEP option is -architecture specific. Other flags may become available on future -platforms, eg for MMIO. Initialise the chanA.irqs to &z8530_nop to -start the chip up as disabled and discarding interrupt events. This -ensures that stray interrupts will be mopped up and not hang the bus. -Set chanA.dev to point to the device structure itself. The private and -name field you may use as you wish. The private field is unused by the -Z85230 layer. The name is used for error reporting and it may thus make -sense to make it match the network name. - -Repeat the same operation with the B channel if your chip has both -channels wired to something useful. This isn't always the case. If it is -not wired then the I/O values do not matter, but you must initialise -chanB.dev. - -If your board has DMA facilities then initialise the txdma and rxdma -fields for the relevant channels. You must also allocate the ISA DMA -channels and do any necessary board level initialisation to configure -them. The low level driver will do the Z8530 and DMA controller -programming but not board specific magic. - -Having initialised the device you can then call -:c:func:`z8530_init()`. This will probe the chip and reset it into -a known state. An identification sequence is then run to identify the -chip type. If the checks fail to pass the function returns a non zero -error code. Typically this indicates that the port given is not valid. -After this call the type field of the z8530_dev structure is -initialised to either Z8530, Z85C30 or Z85230 according to the chip -found. - -Once you have called z8530_init you can also make use of the utility -function :c:func:`z8530_describe()`. This provides a consistent -reporting format for the Z8530 devices, and allows all the drivers to -provide consistent reporting. - -Attaching Network Interfaces -============================ - -If you wish to use the network interface facilities of the driver, then -you need to attach a network device to each channel that is present and -in use. In addition to use the generic HDLC you need to follow some -additional plumbing rules. They may seem complex but a look at the -example hostess_sv11 driver should reassure you. - -The network device used for each channel should be pointed to by the -netdevice field of each channel. The hdlc-> priv field of the network -device points to your private data - you will need to be able to find -your private data from this. - -The way most drivers approach this particular problem is to create a -structure holding the Z8530 device definition and put that into the -private field of the network device. The network device fields of the -channels then point back to the network devices. - -If you wish to use the generic HDLC then you need to register the HDLC -device. - -Before you register your network device you will also need to provide -suitable handlers for most of the network device callbacks. See the -network device documentation for more details on this. - -Configuring And Activating The Port -=================================== - -The Z85230 driver provides helper functions and tables to load the port -registers on the Z8530 chips. When programming the register settings for -a channel be aware that the documentation recommends initialisation -orders. Strange things happen when these are not followed. - -:c:func:`z8530_channel_load()` takes an array of pairs of -initialisation values in an array of u8 type. The first value is the -Z8530 register number. Add 16 to indicate the alternate register bank on -the later chips. The array is terminated by a 255. - -The driver provides a pair of public tables. The z8530_hdlc_kilostream -table is for the UK 'Kilostream' service and also happens to cover most -other end host configurations. The z8530_hdlc_kilostream_85230 table -is the same configuration using the enhancements of the 85230 chip. The -configuration loaded is standard NRZ encoded synchronous data with HDLC -bitstuffing. All of the timing is taken from the other end of the link. - -When writing your own tables be aware that the driver internally tracks -register values. It may need to reload values. You should therefore be -sure to set registers 1-7, 9-11, 14 and 15 in all configurations. Where -the register settings depend on DMA selection the driver will update the -bits itself when you open or close. Loading a new table with the -interface open is not recommended. - -There are three standard configurations supported by the core code. In -PIO mode the interface is programmed up to use interrupt driven PIO. -This places high demands on the host processor to avoid latency. The -driver is written to take account of latency issues but it cannot avoid -latencies caused by other drivers, notably IDE in PIO mode. Because the -drivers allocate buffers you must also prevent MTU changes while the -port is open. - -Once the port is open it will call the rx_function of each channel -whenever a completed packet arrived. This is invoked from interrupt -context and passes you the channel and a network buffer (struct -sk_buff) holding the data. The data includes the CRC bytes so most -users will want to trim the last two bytes before processing the data. -This function is very timing critical. When you wish to simply discard -data the support code provides the function -:c:func:`z8530_null_rx()` to discard the data. - -To active PIO mode sending and receiving the ``z8530_sync_open`` is called. -This expects to be passed the network device and the channel. Typically -this is called from your network device open callback. On a failure a -non zero error status is returned. -The :c:func:`z8530_sync_close()` function shuts down a PIO -channel. This must be done before the channel is opened again and before -the driver shuts down and unloads. - -The ideal mode of operation is dual channel DMA mode. Here the kernel -driver will configure the board for DMA in both directions. The driver -also handles ISA DMA issues such as controller programming and the -memory range limit for you. This mode is activated by calling the -:c:func:`z8530_sync_dma_open()` function. On failure a non zero -error value is returned. Once this mode is activated it can be shut down -by calling the :c:func:`z8530_sync_dma_close()`. You must call -the close function matching the open mode you used. - -The final supported mode uses a single DMA channel to drive the transmit -side. As the Z85C30 has a larger FIFO on the receive channel this tends -to increase the maximum speed a little. This is activated by calling the -``z8530_sync_txdma_open``. This returns a non zero error code on failure. The -:c:func:`z8530_sync_txdma_close()` function closes down the Z8530 -interface from this mode. - -Network Layer Functions -======================= - -The Z8530 layer provides functions to queue packets for transmission. -The driver internally buffers the frame currently being transmitted and -one further frame (in order to keep back to back transmission running). -Any further buffering is up to the caller. - -The function :c:func:`z8530_queue_xmit()` takes a network buffer -in sk_buff format and queues it for transmission. The caller must -provide the entire packet with the exception of the bitstuffing and CRC. -This is normally done by the caller via the generic HDLC interface -layer. It returns 0 if the buffer has been queued and non zero values -for queue full. If the function accepts the buffer it becomes property -of the Z8530 layer and the caller should not free it. - -The function :c:func:`z8530_get_stats()` returns a pointer to an -internally maintained per interface statistics block. This provides most -of the interface code needed to implement the network layer get_stats -callback. - -Porting The Z8530 Driver -======================== - -The Z8530 driver is written to be portable. In DMA mode it makes -assumptions about the use of ISA DMA. These are probably warranted in -most cases as the Z85230 in particular was designed to glue to PC type -machines. The PIO mode makes no real assumptions. - -Should you need to retarget the Z8530 driver to another architecture the -only code that should need changing are the port I/O functions. At the -moment these assume PC I/O port accesses. This may not be appropriate -for all platforms. Replacing :c:func:`z8530_read_port()` and -``z8530_write_port`` is intended to be all that is required to port -this driver layer. - -Known Bugs And Assumptions -========================== - -Interrupt Locking - The locking in the driver is done via the global cli/sti lock. This - makes for relatively poor SMP performance. Switching this to use a - per device spin lock would probably materially improve performance. - -Occasional Failures - We have reports of occasional failures when run for very long - periods of time and the driver starts to receive junk frames. At the - moment the cause of this is not clear. - -Public Functions Provided -========================= - -.. kernel-doc:: drivers/net/wan/z85230.c - :export: - -Internal Functions -================== - -.. kernel-doc:: drivers/net/wan/z85230.c - :internal: diff --git a/Documentation/networking/device_drivers/wwan/index.rst b/Documentation/networking/device_drivers/wwan/index.rst index 1cb8c7371401..370d8264d5dc 100644 --- a/Documentation/networking/device_drivers/wwan/index.rst +++ b/Documentation/networking/device_drivers/wwan/index.rst @@ -9,6 +9,7 @@ Contents: :maxdepth: 2 iosm + t7xx .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/wwan/t7xx.rst b/Documentation/networking/device_drivers/wwan/t7xx.rst new file mode 100644 index 000000000000..dd5b731957ca --- /dev/null +++ b/Documentation/networking/device_drivers/wwan/t7xx.rst @@ -0,0 +1,120 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +.. Copyright (C) 2020-21 Intel Corporation + +.. _t7xx_driver_doc: + +============================================ +t7xx driver for MTK PCIe based T700 5G modem +============================================ +The t7xx driver is a WWAN PCIe host driver developed for linux or Chrome OS platforms +for data exchange over PCIe interface between Host platform & MediaTek's T700 5G modem. +The driver exposes an interface conforming to the MBIM protocol [1]. Any front end +application (e.g. Modem Manager) could easily manage the MBIM interface to enable +data communication towards WWAN. The driver also provides an interface to interact +with the MediaTek's modem via AT commands. + +Basic usage +=========== +MBIM & AT functions are inactive when unmanaged. The t7xx driver provides +WWAN port userspace interfaces representing MBIM & AT control channels and does +not play any role in managing their functionality. It is the job of a userspace +application to detect port enumeration and enable MBIM & AT functionalities. + +Examples of few such userspace applications are: + +- mbimcli (included with the libmbim [2] library), and +- Modem Manager [3] + +Management Applications to carry out below required actions for establishing +MBIM IP session: + +- open the MBIM control channel +- configure network connection settings +- connect to network +- configure IP network interface + +Management Applications to carry out below required actions for send an AT +command and receive response: + +- open the AT control channel using a UART tool or a special user tool + +Management application development +================================== +The driver and userspace interfaces are described below. The MBIM protocol is +described in [1] Mobile Broadband Interface Model v1.0 Errata-1. + +MBIM control channel userspace ABI +---------------------------------- + +/dev/wwan0mbim0 character device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver exposes an MBIM interface to the MBIM function by implementing +MBIM WWAN Port. The userspace end of the control channel pipe is a +/dev/wwan0mbim0 character device. Application shall use this interface for +MBIM protocol communication. + +Fragmentation +~~~~~~~~~~~~~ +The userspace application is responsible for all control message fragmentation +and defragmentation as per MBIM specification. + +/dev/wwan0mbim0 write() +~~~~~~~~~~~~~~~~~~~~~~~ +The MBIM control messages from the management application must not exceed the +negotiated control message size. + +/dev/wwan0mbim0 read() +~~~~~~~~~~~~~~~~~~~~~~ +The management application must accept control messages of up the negotiated +control message size. + +MBIM data channel userspace ABI +------------------------------- + +wwan0-X network device +~~~~~~~~~~~~~~~~~~~~~~ +The t7xx driver exposes IP link interface "wwan0-X" of type "wwan" for IP +traffic. Iproute network utility is used for creating "wwan0-X" network +interface and for associating it with MBIM IP session. + +The userspace management application is responsible for creating new IP link +prior to establishing MBIM IP session where the SessionId is greater than 0. + +For example, creating new IP link for a MBIM IP session with SessionId 1: + + ip link add dev wwan0-1 parentdev wwan0 type wwan linkid 1 + +The driver will automatically map the "wwan0-1" network device to MBIM IP +session 1. + +AT port userspace ABI +---------------------------------- + +/dev/wwan0at0 character device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver exposes an AT port by implementing AT WWAN Port. +The userspace end of the control port is a /dev/wwan0at0 character +device. Application shall use this interface to issue AT commands. + +The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification. + +References +========== +[1] *MBIM (Mobile Broadband Interface Model) Errata-1* + +- https://www.usb.org/document-library/ + +[2] *libmbim "a glib-based library for talking to WWAN modems and devices which +speak the Mobile Interface Broadband Model (MBIM) protocol"* + +- http://www.freedesktop.org/wiki/Software/libmbim/ + +[3] *Modem Manager "a DBus-activated daemon which controls mobile broadband +(2G/3G/4G/5G) devices and connections"* + +- http://www.freedesktop.org/wiki/Software/ModemManager/ + +[4] *Specification # 27.007 - 3GPP* + +- https://www.3gpp.org/DynaReport/27007.htm diff --git a/Documentation/networking/devlink/devlink-linecard.rst b/Documentation/networking/devlink/devlink-linecard.rst new file mode 100644 index 000000000000..6c0b8928bc13 --- /dev/null +++ b/Documentation/networking/devlink/devlink-linecard.rst @@ -0,0 +1,122 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +Devlink Line card +================= + +Background +========== + +The ``devlink-linecard`` mechanism is targeted for manipulation of +line cards that serve as a detachable PHY modules for modular switch +system. Following operations are provided: + + * Get a list of supported line card types. + * Provision of a slot with specific line card type. + * Get and monitor of line card state and its change. + +Line card according to the type may contain one or more gearboxes +to mux the lanes with certain speed to multiple ports with lanes +of different speed. Line card ensures N:M mapping between +the switch ASIC modules and physical front panel ports. + +Overview +======== + +Each line card devlink object is created by device driver, +according to the physical line card slots available on the device. + +Similar to splitter cable, where the device might have no way +of detection of the splitter cable geometry, the device +might not have a way to detect line card type. For that devices, +concept of provisioning is introduced. It allows the user to: + + * Provision a line card slot with certain line card type + + - Device driver would instruct the ASIC to prepare all + resources accordingly. The device driver would + create all instances, namely devlink port and netdevices + that reside on the line card, according to the line card type + * Manipulate of line card entities even without line card + being physically connected or powered-up + * Setup splitter cable on line card ports + + - As on the ordinary ports, user may provision a splitter + cable of a certain type, without the need to + be physically connected to the port + * Configure devlink ports and netdevices + +Netdevice carrier is decided as follows: + + * Line card is not inserted or powered-down + + - The carrier is always down + * Line card is inserted and powered up + + - The carrier is decided as for ordinary port netdevice + +Line card state +=============== + +The ``devlink-linecard`` mechanism supports the following line card states: + + * ``unprovisioned``: Line card is not provisioned on the slot. + * ``unprovisioning``: Line card slot is currently being unprovisioned. + * ``provisioning``: Line card slot is currently in a process of being provisioned + with a line card type. + * ``provisioning_failed``: Provisioning was not successful. + * ``provisioned``: Line card slot is provisioned with a type. + * ``active``: Line card is powered-up and active. + +The following diagram provides a general overview of ``devlink-linecard`` +state transitions:: + + +-------------------------+ + | | + +----------------------------------> unprovisioned | + | | | + | +--------|-------^--------+ + | | | + | | | + | +--------v-------|--------+ + | | | + | | provisioning | + | | | + | +------------|------------+ + | | + | +-----------------------------+ + | | | + | +------------v------------+ +------------v------------+ +-------------------------+ + | | | | ----> | + +----- provisioning_failed | | provisioned | | active | + | | | | <---- | + | +------------^------------+ +------------|------------+ +-------------------------+ + | | | + | | | + | | +------------v------------+ + | | | | + | | | unprovisioning | + | | | | + | | +------------|------------+ + | | | + | +-----------------------------+ + | | + +-----------------------------------------------+ + + +Example usage +============= + +.. code:: shell + + $ devlink lc show [ DEV [ lc LC_INDEX ] ] + $ devlink lc set DEV lc LC_INDEX [ { type LC_TYPE | notype } ] + + # Show current line card configuration and status for all slots: + $ devlink lc + + # Set slot 8 to be provisioned with type "16x100G": + $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G + + # Set slot 8 to be unprovisioned: + $ devlink lc set pci/0000:01:00.0 lc 8 notype diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index c17cdb079611..850715512293 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -39,6 +39,7 @@ general. devlink-resource devlink-reload devlink-trap + devlink-linecard Driver-specific documentation ----------------------------- diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index ddc1dd039337..ed7fa76e7a40 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -193,6 +193,23 @@ protocol. If not all packets are of equal size, the tagger can implement the default behavior by specifying the correct offset incurred by each individual RX packet. Tail taggers do not cause issues to the flow dissector. +Checksum offload should work with category 1 and 2 taggers when the DSA master +driver declares NETIF_F_HW_CSUM in vlan_features and looks at csum_start and +csum_offset. For those cases, DSA will shift the checksum start and offset by +the tag size. If the DSA master driver still uses the legacy NETIF_F_IP_CSUM +or NETIF_F_IPV6_CSUM in vlan_features, the offload might only work if the +offload hardware already expects that specific tag (perhaps due to matching +vendors). DSA slaves inherit those flags from the master port, and it is up to +the driver to correctly fall back to software checksum when the IP header is not +where the hardware expects. If that check is ineffective, the packets might go +to the network without a proper checksum (the checksum field will have the +pseudo IP header sum). For category 3, when the offload hardware does not +already expect the switch tag in use, the checksum must be calculated before any +tag is inserted (i.e. inside the tagger). Otherwise, the DSA master would +include the tail tag in the (software or hardware) checksum calculation. Then, +when the tag gets stripped by the switch during transmission, it will leave an +incorrect IP checksum in place. + Due to various reasons (most common being category 1 taggers being associated with DSA-unaware masters, mangling what the master perceives as MAC DA), the tagging protocol may require the DSA master to operate in promiscuous mode, to diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 24d9be69065d..dbca3e9ec782 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -862,6 +862,7 @@ Kernel response contents: ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE + ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode ==================================== ====== =========================== ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with @@ -871,6 +872,12 @@ separate buffers. The device configuration must make it possible to receive full memory pages of data, for example because MTU is high enough or through HW-GRO. +``ETHTOOL_A_RINGS_TX_PUSH`` flag is used to enable descriptor fast +path to send packets. In ordinary path, driver fills descriptors in DRAM and +notifies NIC hardware. In fast path, driver pushes descriptors to the device +through MMIO writes, thus reducing the latency. However, enabling this feature +may increase the CPU cost. Drivers may enforce additional per-packet +eligibility checks (e.g. on packet size). RINGS_SET ========= @@ -887,6 +894,7 @@ Request contents: ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE + ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode ==================================== ====== =========================== Kernel checks that requested ring sizes do not exceed limits reported by diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 72cf33579b78..03b215bddde8 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -1,5 +1,5 @@ -Linux Networking Documentation -============================== +Networking +========== Refer to :ref:`netdev-FAQ` for a guide on netdev development process specifics. @@ -97,6 +97,7 @@ Contents: sctp secid seg6-sysctl + skbuff smc-sysctl statistics strparser diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 66828293d9cb..b882d4238581 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -2474,6 +2474,33 @@ drop_unsolicited_na - BOOLEAN By default this is turned off. +accept_unsolicited_na - BOOLEAN + Add a new neighbour cache entry in STALE state for routers on receiving an + unsolicited neighbour advertisement with target link-layer address option + specified. This is as per router-side behavior documented in RFC9131. + This has lower precedence than drop_unsolicited_na. + + ==== ====== ====== ============================================== + drop accept fwding behaviour + ---- ------ ------ ---------------------------------------------- + 1 X X Drop NA packet and don't pass up the stack + 0 0 X Pass NA packet up the stack, don't update NC + 0 1 0 Pass NA packet up the stack, don't update NC + 0 1 1 Pass NA packet up the stack, and add a STALE + NC entry + ==== ====== ====== ============================================== + + This will optimize the return path for the initial off-link communication + that is initiated by a directly connected host, by ensuring that + the first-hop router which turns on this setting doesn't have to + buffer the initial return packets to do neighbour-solicitation. + The prerequisite is that the host is configured to send + unsolicited neighbour advertisements on interface bringup. + This setting should be used in conjunction with the ndisc_notify setting + on the host to satisfy this prerequisite. + + By default this is turned off. + enhanced_dad - BOOLEAN Include a nonce option in the IPv6 neighbor solicitation messages used for duplicate address detection per RFC7527. A received DAD NS will only signal diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index b0d4da71e68e..e263dfcc4b40 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -46,6 +46,24 @@ allow_join_initial_addr_port - BOOLEAN Default: 1 +pm_type - INTEGER + + Set the default path manager type to use for each new MPTCP + socket. In-kernel path management will control subflow + connections and address advertisements according to + per-namespace values configured over the MPTCP netlink + API. Userspace path management puts per-MPTCP-connection subflow + connection decisions and address advertisements under control of + a privileged userspace program, at the cost of more netlink + traffic to propagate all of the related events and commands. + + This is a per-namespace sysctl. + + * 0 - In-kernel path manager + * 1 - Userspace path manager + + Default: 0 + stale_loss_cnt - INTEGER The number of MPTCP-level retransmission intervals with no traffic and pending outstanding data on a given subflow required to declare it stale. diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst index 311128abb768..834945ebc4cd 100644 --- a/Documentation/networking/nf_conntrack-sysctl.rst +++ b/Documentation/networking/nf_conntrack-sysctl.rst @@ -34,10 +34,13 @@ nf_conntrack_count - INTEGER (read-only) nf_conntrack_events - BOOLEAN - 0 - disabled - - not 0 - enabled (default) + - 1 - enabled + - 2 - auto (default) If this option is enabled, the connection tracking code will provide userspace with connection tracking events via ctnetlink. + The default allocates the extension if a userspace program is + listening to ctnetlink events. nf_conntrack_expect_max - INTEGER Maximum size of expectation table. Default value is diff --git a/Documentation/networking/skbuff.rst b/Documentation/networking/skbuff.rst new file mode 100644 index 000000000000..5b74275a73a3 --- /dev/null +++ b/Documentation/networking/skbuff.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 + +struct sk_buff +============== + +:c:type:`sk_buff` is the main networking structure representing +a packet. + +Basic sk_buff geometry +---------------------- + +.. kernel-doc:: include/linux/skbuff.h + :doc: Basic sk_buff geometry + +Shared skbs and skb clones +-------------------------- + +:c:member:`sk_buff.users` is a simple refcount allowing multiple entities +to keep a struct sk_buff alive. skbs with a ``sk_buff.users != 1`` are referred +to as shared skbs (see skb_shared()). + +skb_clone() allows for fast duplication of skbs. None of the data buffers +get copied, but caller gets a new metadata struct (struct sk_buff). +&skb_shared_info.refcount indicates the number of skbs pointing at the same +packet data (i.e. clones). + +dataref and headerless skbs +--------------------------- + +.. kernel-doc:: include/linux/skbuff.h + :doc: dataref and headerless skbs + +Checksum information +-------------------- + +.. kernel-doc:: include/linux/skbuff.h + :doc: skb checksums diff --git a/Documentation/powerpc/dawr-power9.rst b/Documentation/powerpc/dawr-power9.rst index e55ac6a24b97..310f2e0cea81 100644 --- a/Documentation/powerpc/dawr-power9.rst +++ b/Documentation/powerpc/dawr-power9.rst @@ -2,15 +2,23 @@ DAWR issues on POWER9 ===================== -On POWER9 the Data Address Watchpoint Register (DAWR) can cause a checkstop -if it points to cache inhibited (CI) memory. Currently Linux has no way to -distinguish CI memory when configuring the DAWR, so (for now) the DAWR is -disabled by this commit:: - - commit 9654153158d3e0684a1bdb76dbababdb7111d5a0 - Author: Michael Neuling <mikey@neuling.org> - Date: Tue Mar 27 15:37:24 2018 +1100 - powerpc: Disable DAWR in the base POWER9 CPU features +On older POWER9 processors, the Data Address Watchpoint Register (DAWR) can +cause a checkstop if it points to cache inhibited (CI) memory. Currently Linux +has no way to distinguish CI memory when configuring the DAWR, so on affected +systems, the DAWR is disabled. + +Affected processor revisions +============================ + +This issue is only present on processors prior to v2.3. The revision can be +found in /proc/cpuinfo:: + + processor : 0 + cpu : POWER9, altivec supported + clock : 3800.000000MHz + revision : 2.3 (pvr 004e 1203) + +On a system with the issue, the DAWR is disabled as detailed below. Technical Details: ================== diff --git a/Documentation/powerpc/kasan.txt b/Documentation/powerpc/kasan.txt new file mode 100644 index 000000000000..f032b4eaf205 --- /dev/null +++ b/Documentation/powerpc/kasan.txt @@ -0,0 +1,58 @@ +KASAN is supported on powerpc on 32-bit and Radix 64-bit only. + +32 bit support +============== + +KASAN is supported on both hash and nohash MMUs on 32-bit. + +The shadow area sits at the top of the kernel virtual memory space above the +fixmap area and occupies one eighth of the total kernel virtual memory space. + +Instrumentation of the vmalloc area is optional, unless built with modules, +in which case it is required. + +64 bit support +============== + +Currently, only the radix MMU is supported. There have been versions for hash +and Book3E processors floating around on the mailing list, but nothing has been +merged. + +KASAN support on Book3S is a bit tricky to get right: + + - It would be good to support inline instrumentation so as to be able to catch + stack issues that cannot be caught with outline mode. + + - Inline instrumentation requires a fixed offset. + + - Book3S runs code with translations off ("real mode") during boot, including a + lot of generic device-tree parsing code which is used to determine MMU + features. + + - Some code - most notably a lot of KVM code - also runs with translations off + after boot. + + - Therefore any offset has to point to memory that is valid with + translations on or off. + +One approach is just to give up on inline instrumentation. This way boot-time +checks can be delayed until after the MMU is set is up, and we can just not +instrument any code that runs with translations off after booting. This is the +current approach. + +To avoid this limitiation, the KASAN shadow would have to be placed inside the +linear mapping, using the same high-bits trick we use for the rest of the linear +mapping. This is tricky: + + - We'd like to place it near the start of physical memory. In theory we can do + this at run-time based on how much physical memory we have, but this requires + being able to arbitrarily relocate the kernel, which is basically the tricky + part of KASLR. Not being game to implement both tricky things at once, this + is hopefully something we can revisit once we get KASLR for Book3S. + + - Alternatively, we can place the shadow at the _end_ of memory, but this + requires knowing how much contiguous physical memory a system has _at compile + time_. This is a big hammer, and has some unfortunate consequences: inablity + to handle discontiguous physical memory, total failure to boot on machines + with less memory than specified, and that machines with more memory than + specified can't use it. This was deemed unacceptable. diff --git a/Documentation/process/3.Early-stage.rst b/Documentation/process/3.Early-stage.rst index 6bfd60d77d1a..894a920041c6 100644 --- a/Documentation/process/3.Early-stage.rst +++ b/Documentation/process/3.Early-stage.rst @@ -154,10 +154,11 @@ that the kernel developers have added a script to ease the process: This script will return the current maintainer(s) for a given file or directory when given the "-f" option. If passed a patch on the command line, it will list the maintainers who should probably receive -copies of the patch. There are a number of options regulating how hard -get_maintainer.pl will search for maintainers; please be careful about -using the more aggressive options as you may end up including developers -who have no real interest in the code you are modifying. +copies of the patch. This is the preferred way (unlike "-f" option) to get the +list of people to Cc for your patches. There are a number of options +regulating how hard get_maintainer.pl will search for maintainers; please be +careful about using the more aggressive options as you may end up including +developers who have no real interest in the code you are modifying. If all else fails, talking to Andrew Morton can be an effective way to track down a maintainer for a specific piece of code. diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index a337e8eabfe1..34415ae1af1b 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -7,7 +7,7 @@ Intro ===== This document is designed to provide a list of the minimum levels of -software necessary to run the 4.x kernels. +software necessary to run the current kernel version. This document is originally based on my "Changes" file for 2.0.x kernels and therefore owes credit to the same people as that file (Jared Mauch, @@ -56,6 +56,7 @@ iptables 1.4.2 iptables -V openssl & libcrypto 1.0.0 openssl version bc 1.06.95 bc --version Sphinx\ [#f1]_ 1.7 sphinx-build --version +cpio any cpio --version ====================== =============== ======================================== .. [#f1] Sphinx is needed only to build the Kernel documentation @@ -458,6 +459,11 @@ mcelog - <http://www.mcelog.org/> +cpio +---- + +- <https://www.gnu.org/software/cpio/> + Networking ********** diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index fb496b2ebfd3..a1cb6280fbcf 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -77,7 +77,7 @@ as you intend it to. The maintainer will thank you if you write your patch description in a form which can be easily pulled into Linux's source code management -system, ``git``, as a "commit log". See :ref:`explicit_in_reply_to`. +system, ``git``, as a "commit log". See :ref:`the_canonical_patch_format`. Solve only one problem per patch. If your description starts to get long, that's a sign that you probably need to split up your patch. @@ -227,9 +227,10 @@ Select the recipients for your patch You should always copy the appropriate subsystem maintainer(s) on any patch to code that they maintain; look through the MAINTAINERS file and the source code revision history to see who those maintainers are. The -script scripts/get_maintainer.pl can be very useful at this step. If you -cannot find a maintainer for the subsystem you are working on, Andrew -Morton (akpm@linux-foundation.org) serves as a maintainer of last resort. +script scripts/get_maintainer.pl can be very useful at this step (pass paths to +your patches as arguments to scripts/get_maintainer.pl). If you cannot find a +maintainer for the subsystem you are working on, Andrew Morton +(akpm@linux-foundation.org) serves as a maintainer of last resort. You should also normally choose at least one mailing list to receive a copy of your patch set. linux-kernel@vger.kernel.org should be used by default @@ -318,7 +319,10 @@ understands what is going on. Be sure to tell the reviewers what changes you are making and to thank them for their time. Code review is a tiring and time-consuming process, and reviewers sometimes get grumpy. Even in that case, though, respond -politely and address the problems they have pointed out. +politely and address the problems they have pointed out. When sending a next +version, add a ``patch changelog`` to the cover letter or to individual patches +explaining difference aganst previous submission (see +:ref:`the_canonical_patch_format`). See Documentation/process/email-clients.rst for recommendations on email clients and mailing list etiquette. diff --git a/Documentation/scheduler/sched-stats.rst b/Documentation/scheduler/sched-stats.rst index dd9b99a025f7..03c062915998 100644 --- a/Documentation/scheduler/sched-stats.rst +++ b/Documentation/scheduler/sched-stats.rst @@ -56,9 +56,9 @@ Next two are try_to_wake_up() statistics: Next three are statistics describing scheduling latency: - 7) sum of all time spent running by tasks on this processor (in jiffies) + 7) sum of all time spent running by tasks on this processor (in nanoseconds) 8) sum of all time spent waiting to run by tasks on this processor (in - jiffies) + nanoseconds) 9) # of timeslices run on this cpu @@ -155,8 +155,8 @@ schedstats also adds a new /proc/<pid>/schedstat file to include some of the same information on a per-process level. There are three fields in this file correlating for that process to: - 1) time spent on the cpu - 2) time spent waiting on a runqueue + 1) time spent on the cpu (in nanoseconds) + 2) time spent waiting on a runqueue (in nanoseconds) 3) # of timeslices run on this cpu A program could be easily written to make use of these extra fields to diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst index 34888d4fc4a8..21ab5e6f7062 100644 --- a/Documentation/sound/alsa-configuration.rst +++ b/Documentation/sound/alsa-configuration.rst @@ -2246,7 +2246,7 @@ implicit_fb Apply the generic implicit feedback sync mode. When this is set and the playback stream sync mode is ASYNC, the driver tries to tie an adjacent ASYNC capture stream as the implicit feedback - source. + source. This is equivalent with quirk_flags bit 17. use_vmalloc Use vmalloc() for allocations of the PCM buffers (default: yes). For architectures with non-coherent memory like ARM or MIPS, the @@ -2288,6 +2288,8 @@ quirk_flags * bit 14: Ignore errors for mixer access * bit 15: Support generic DSD raw U32_BE format * bit 16: Set up the interface at first like UAC1 + * bit 17: Apply the generic implicit feedback sync mode + * bit 18: Don't apply implicit feedback sync mode This module supports multiple devices, autoprobe and hotplugging. diff --git a/Documentation/sphinx/kerneldoc-preamble.sty b/Documentation/sphinx/kerneldoc-preamble.sty index 9d0204dc38be..2a29cbe51396 100644 --- a/Documentation/sphinx/kerneldoc-preamble.sty +++ b/Documentation/sphinx/kerneldoc-preamble.sty @@ -20,13 +20,13 @@ % - Indent of 2 chars is preserved for ease of comparison. % Summary of changes from default params: % Width of page number (\@pnumwidth): 1.55em -> 2.7em -% Width of chapter number: 1.5em -> 1.8em -% Indent of section number: 1.5em -> 1.8em +% Width of chapter number: 1.5em -> 2.4em +% Indent of section number: 1.5em -> 2.4em % Width of section number: 2.6em -> 3.2em -% Indent of sebsection number: 4.1em -> 5em +% Indent of subsection number: 4.1em -> 5.6em % Width of subsection number: 3.5em -> 4.3em % -% These params can have 4 digit page counts, 2 digit chapter counts, +% These params can have 4 digit page counts, 3 digit chapter counts, % section counts of 4 digits + 1 period (e.g., 18.10), and subsection counts % of 5 digits + 2 periods (e.g., 18.7.13). \makeatletter @@ -37,7 +37,7 @@ \ifnum \c@tocdepth >\m@ne \addpenalty{-\@highpenalty}% \vskip 1.0em \@plus\p@ - \setlength\@tempdima{1.8em}% + \setlength\@tempdima{2.4em}% \begingroup \parindent \z@ \rightskip \@pnumwidth \parfillskip -\@pnumwidth @@ -51,8 +51,8 @@ \endgroup \fi} %% Redefine \l@section and \l@subsection -\renewcommand*\l@section{\@dottedtocline{1}{1.8em}{3.2em}} -\renewcommand*\l@subsection{\@dottedtocline{2}{5em}{4.3em}} +\renewcommand*\l@section{\@dottedtocline{1}{2.4em}{3.2em}} +\renewcommand*\l@subsection{\@dottedtocline{2}{5.6em}{4.3em}} \makeatother %% Sphinx < 1.8 doesn't have \sphinxtableofcontentshook \providecommand{\sphinxtableofcontentshook}{} diff --git a/Documentation/tools/rtla/Makefile b/Documentation/tools/rtla/Makefile index 9f2b84af1a6c..093af6d7a0e9 100644 --- a/Documentation/tools/rtla/Makefile +++ b/Documentation/tools/rtla/Makefile @@ -17,9 +17,21 @@ DOC_MAN1 = $(addprefix $(OUTPUT),$(_DOC_MAN1)) RST2MAN_DEP := $(shell command -v rst2man 2>/dev/null) RST2MAN_OPTS += --verbose +TEST_RST2MAN = $(shell sh -c "rst2man --version > /dev/null 2>&1 || echo n") + $(OUTPUT)%.1: %.rst ifndef RST2MAN_DEP - $(error "rst2man not found, but required to generate man pages") + $(info ********************************************) + $(info ** NOTICE: rst2man not found) + $(info **) + $(info ** Consider installing the latest rst2man from your) + $(info ** distribution, e.g., 'dnf install python3-docutils' on Fedora,) + $(info ** or from source:) + $(info **) + $(info ** https://docutils.sourceforge.io/docs/dev/repository.html ) + $(info **) + $(info ********************************************) + $(error NOTICE: rst2man required to generate man pages) endif rst2man $(RST2MAN_OPTS) $< > $@ diff --git a/Documentation/tools/rtla/common_appendix.rst b/Documentation/tools/rtla/common_appendix.rst index b494084acccd..b5cf2dc223df 100644 --- a/Documentation/tools/rtla/common_appendix.rst +++ b/Documentation/tools/rtla/common_appendix.rst @@ -1,6 +1,7 @@ REPORTING BUGS ============== -Report bugs to <lkml@vger.kernel.org> +Report bugs to <linux-kernel@vger.kernel.org> +and <linux-trace-devel@vger.kernel.org> LICENSE ======= diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index 45b8c56af67a..b37dc19e4d40 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -517,6 +517,18 @@ of ftrace. Here is a list of some of the key files: processing should be able to handle them. See comments in the ktime_get_boot_fast_ns() function for more information. + tai: + This is the tai clock (CLOCK_TAI) and is derived from the wall- + clock time. However, this clock does not experience + discontinuities and backwards jumps caused by NTP inserting leap + seconds. Since the clock access is designed for use in tracing, + side effects are possible. The clock access may yield wrong + readouts in case the internal TAI offset is updated e.g., caused + by setting the system time or using adjtimex() with an offset. + These effects are rare and post processing should be able to + handle them. See comments in the ktime_get_tai_fast_ns() + function for more information. + To set a clock, simply echo the clock name into this file:: # echo global > trace_clock diff --git a/Documentation/trace/timerlat-tracer.rst b/Documentation/trace/timerlat-tracer.rst index 64d1fe6e9b93..d643c95c01eb 100644 --- a/Documentation/trace/timerlat-tracer.rst +++ b/Documentation/trace/timerlat-tracer.rst @@ -74,8 +74,9 @@ directory. The timerlat configs are: - stop_tracing_total_us: stop the system tracing if a timer latency at the *thread* context is higher than the configured value happens. Writing 0 disables this option. - - print_stack: save the stack of the IRQ occurrence, and print - it after the *thread context* event". + - print_stack: save the stack of the IRQ occurrence. The stack is printed + after the *thread context* event, or at the IRQ handler if *stop_tracing_us* + is hit. timerlat and osnoise ---------------------------- diff --git a/Documentation/translations/ja_JP/SubmittingPatches b/Documentation/translations/ja_JP/SubmittingPatches index 0d308edef781..66ce0d8b0526 100644 --- a/Documentation/translations/ja_JP/SubmittingPatches +++ b/Documentation/translations/ja_JP/SubmittingPatches @@ -81,9 +81,7 @@ Linux カーãƒãƒ«ã«å¯¾ã™ã‚‹å…¨ã¦ã®å¤‰æ›´ã¯ diff(1) コマンドã«ã‚ˆã‚‹ãƒ dontdiff ファイルã«ã¯ Linux カーãƒãƒ«ã®ãƒ“ルドプãƒã‚»ã‚¹ã®éŽç¨‹ã§ç”Ÿæˆã•ã‚ŒãŸ ファイルã®ä¸€è¦§ãŒã®ã£ã¦ã„ã¾ã™ã€‚ãã—ã¦ã€ãれらã¯ãƒ‘ッãƒã‚’生æˆã™ã‚‹ diff(1) コマンドã§ç„¡è¦–ã•ã‚Œã‚‹ã¹ãã§ã™ã€‚dontdiff ファイル㯠2.6.12 以後ã®ãƒãƒ¼ã‚¸ãƒ§ -ン㮠Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã«å«ã¾ã‚Œã¦ã„ã¾ã™ã€‚ãれよりå‰ã®ãƒãƒ¼ã‚¸ãƒ§ãƒ³ -ã® Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã«å¯¾ã™ã‚‹ dontdiff ファイルã¯ã€ -<http://www.xenotime.net/linux/doc/dontdiff>ã‹ã‚‰å–å¾—ã™ã‚‹ã“ã¨ãŒã§ãã¾ã™ã€‚ +ン㮠Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã«å«ã¾ã‚Œã¦ã„ã¾ã™ã€‚ 投稿ã™ã‚‹ãƒ‘ッãƒã®ä¸ã«é–¢ä¿‚ã®ãªã„余分ãªãƒ•ã‚¡ã‚¤ãƒ«ãŒå«ã¾ã‚Œã¦ã„ãªã„ã“ã¨ã‚’確 èªã—ã¦ãã ã•ã„。diff(1) コマンドã§ç”Ÿæˆã—ãŸãƒ‘ッãƒãŒã‚ãªãŸã®æ„図ã—ãŸã¨ãŠ @@ -125,6 +123,17 @@ http://savannah.nongnu.org/projects/quilt 登録済ã¿ã®ãƒã‚°ã‚¨ãƒ³ãƒˆãƒªã‚’ä¿®æ£ã™ã‚‹ãƒ‘ッãƒã§ã‚ã‚Œã°ã€ãã®ãƒã‚°ã‚¨ãƒ³ãƒˆãƒªã‚’示ã™ãƒã‚° ID ã‚„ URL を明記ã—ã¦ãã ã•ã„。 +特定ã®ã‚³ãƒŸãƒƒãƒˆã‚’å‚ç…§ã—ãŸã„å ´åˆã¯ã€ãã® SHA-1 ID ã ã‘ã§ãªãã€ä¸€è¡Œã‚µãƒžãƒª +ã‚‚å«ã‚ã¦ãã ã•ã„。ãã‚Œã«ã‚ˆã‚Šã€ãã‚ŒãŒä½•ã«é–¢ã™ã‚‹ã‚³ãƒŸãƒƒãƒˆãªã®ã‹ãŒãƒ¬ãƒ“ューã™ã‚‹ +人ã«ã‚ã‹ã‚Šã‚„ã™ããªã‚Šã¾ã™ã€‚ +例 (英文ã®ãƒžãƒž): + + Commit e21d2170f36602ae2708 ("video: remove unnecessary + platform_set_drvdata()") removed the unnecessary + platform_set_drvdata(), but left the variable "dev" unused, + delete it. + + 3) パッãƒã®åˆ†å‰² æ„味ã®ã‚ã‚‹ã²ã¨ã¾ã¨ã¾ã‚Šã”ã¨ã«å¤‰æ›´ã‚’個々ã®ãƒ‘ッãƒãƒ•ã‚¡ã‚¤ãƒ«ã«åˆ†ã‘ã¦ãã ã•ã„。 @@ -162,7 +171,8 @@ http://savannah.nongnu.org/projects/quilt MAINTAINERS ファイルã¨ã‚½ãƒ¼ã‚¹ã‚³ãƒ¼ãƒ‰ã«ç›®ã‚’通ã—ã¦ãã ã•ã„。ãã—ã¦ã€ãã®å¤‰ æ›´ãŒãƒ¡ãƒ³ãƒ†ãƒŠã®ã„る特定ã®ã‚µãƒ–システムã«åŠ ãˆã‚‰ã‚Œã‚‹ã‚‚ã®ã§ã‚ã‚‹ã“ã¨ãŒåˆ†ã‹ -ã‚Œã°ã€ãã®äººã«é›»åメールをé€ã£ã¦ãã ã•ã„。 +ã‚Œã°ã€ãã®äººã«é›»åメールをé€ã£ã¦ãã ã•ã„。ãã®éš› +./scripts/get_maintainers.pl ã®ã‚¹ã‚¯ãƒªãƒ—トãŒæœ‰ç”¨ã§ã™ã€‚ ã‚‚ã—ã€ãƒ¡ãƒ³ãƒ†ãƒŠãŒè¼‰ã£ã¦ã„ãªã‹ã£ãŸã‚Šã€ãƒ¡ãƒ³ãƒ†ãƒŠã‹ã‚‰ã®å¿œç”ãŒãªã„ãªã‚‰ã€ LKML ( linux-kernel@vger.kernel.org )ã¸ãƒ‘ッãƒã‚’é€ã£ã¦ãã ã•ã„。ã»ã¨ã‚“ã© @@ -400,7 +410,7 @@ Acked-by: ãŒå¿…ãšã—もパッãƒå…¨ä½“ã®æ‰¿èªã‚’示ã—ã¦ã„ã‚‹ã‚ã‘ã§ã¯ã ã“ã®ã‚¿ã‚°ã¯ãƒ‘ッãƒã«é–¢å¿ƒãŒã‚ã‚‹ã¨æ€ã‚れる人é”ãŒãã®ãƒ‘ッãƒã®è°è«–ã«å«ã¾ã‚Œã¦ã„ãŸã“㨠を明文化ã—ã¾ã™ã€‚ -14) Reported-by 㨠Tested-by: 㨠Reviewed-by: ã®åˆ©ç”¨ +14) Reported-by:, Tested-by:, Reviewed-by: ãŠã‚ˆã³ Suggested-by: ã®åˆ©ç”¨ ä»–ã®èª°ã‹ã«ã‚ˆã£ã¦å ±å‘Šã•ã‚ŒãŸå•é¡Œã‚’ä¿®æ£ã™ã‚‹ãƒ‘ッãƒã§ã‚ã‚Œã°ã€å•é¡Œå ±å‘Šè€…ã¨ã„ã†å¯„与を クレジットã™ã‚‹ãŸã‚ã«ã€Reported-by: ã‚¿ã‚°ã‚’è¿½åŠ ã™ã‚‹ã“ã¨ã‚’検討ã—ã¦ãã ã•ã„。 @@ -449,6 +459,13 @@ Reviewd-by ã‚¿ã‚°ã¯ãã®ãƒ‘ッãƒãŒã‚«ãƒ¼ãƒãƒ«ã«å¯¾ã—ã¦é©åˆ‡ãªä¿®æ£ã§ レビューを実施ã—ãŸãƒ¬ãƒ“ューアã«ã‚ˆã£ã¦æä¾›ã•ã‚Œã‚‹æ™‚ã€Reviewed-by: ã‚¿ã‚°ãŒã‚ãªãŸã® パッãƒã‚’カーãƒãƒ«ã«ãƒžãƒ¼ã‚¸ã™ã‚‹å¯èƒ½æ€§ã‚’高ã‚ã‚‹ã§ã—ょã†ã€‚ +Suggested-by: ã‚¿ã‚°ã¯ã€ãƒ‘ッãƒã®ã‚¢ã‚¤ãƒ‡ã‚¢ãŒãã®äººã‹ã‚‰ã®æ案ã«åŸºã¥ãã‚‚ã®ã§ã‚ã‚‹ +ã“ã¨ã‚’示ã—ã€ã‚¢ã‚¤ãƒ‡ã‚¢ã®æ供をクレジットã™ã‚‹ã‚‚ã®ã§ã™ã€‚æ案者ã®æ˜Žç¤ºçš„ãªè¨±å¯ãŒ +ãªã„å ´åˆã€ç‰¹ã«ãã®ã‚¢ã‚¤ãƒ‡ã‚¢ãŒå…¬é–‹ã®ãƒ•ã‚©ãƒ¼ãƒ©ãƒ ã§ç¤ºã•ã‚Œã¦ã„ãªã„å ´åˆã«ã¯ã€ã“ã® +ã‚¿ã‚°ã‚’ã¤ã‘ãªã„よã†ã«æ³¨æ„ã—ã¦ãã ã•ã„。ã¨ã¯ã„ãˆã€ã‚¢ã‚¤ãƒ‡ã‚¢ã®æ供者をã“ã¤ã“㤠+クレジットã—ã¦ã„ã‘ã°ã€æœ›ã‚€ã‚‰ãã¯ãã®äººãŸã¡ãŒå°†æ¥åˆ¥ã®æ©Ÿä¼šã«å†åº¦åŠ›ã‚’貸ã™æ°—ã« +ãªã£ã¦ãれるã‹ã‚‚ã—ã‚Œã¾ã›ã‚“。 + 15) 標準的ãªãƒ‘ッãƒã®ãƒ•ã‚©ãƒ¼ãƒžãƒƒãƒˆ 標準的ãªãƒ‘ッãƒã®ã‚µãƒ–ジェクトã¯ä»¥ä¸‹ã®ã¨ãŠã‚Šã§ã™ã€‚ @@ -681,10 +698,11 @@ Jeff Garzik, "Linux kernel patch submission format". <https://web.archive.org/web/20180829112450/http://linux.yyz.us/patch-format.html> Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". - <http://www.kroah.com/log/2005/03/31/> - <http://www.kroah.com/log/2005/07/08/> - <http://www.kroah.com/log/2005/10/19/> - <http://www.kroah.com/log/2006/01/11/> + <http://www.kroah.com/log/linux/maintainer.html> + <http://www.kroah.com/log/linux/maintainer-02.html> + <http://www.kroah.com/log/linux/maintainer-03.html> + <http://www.kroah.com/log/linux/maintainer-04.html> + <http://www.kroah.com/log/linux/maintainer-05.html> NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! <https://lore.kernel.org/r/20050711.125305.08322243.davem@davemloft.net> diff --git a/Documentation/translations/ja_JP/howto.rst b/Documentation/translations/ja_JP/howto.rst index d667f9d8a02a..38fed6fe62fe 100644 --- a/Documentation/translations/ja_JP/howto.rst +++ b/Documentation/translations/ja_JP/howto.rst @@ -262,21 +262,21 @@ Linux カーãƒãƒ«ã®é–‹ç™ºãƒ—ãƒã‚»ã‚¹ã¯ç¾åœ¨å¹¾ã¤ã‹ã®ç•°ãªã‚‹ãƒ¡ã‚¤ãƒ³ã‚ ãƒã€ã¨å¤šæ•°ã®ã‚µãƒ–システム毎ã®ã‚«ãƒ¼ãƒãƒ«ãƒ–ランãƒã‹ã‚‰æ§‹æˆã•ã‚Œã¾ã™ã€‚ã“れら㮠ブランãƒã¨ã¯ - - - メイン㮠4.x カーãƒãƒ«ãƒ„リー - - 4.x.y -stable カーãƒãƒ«ãƒ„リー - - サブシステム毎ã®ã‚«ãƒ¼ãƒãƒ«ãƒ„リーã¨ãƒ‘ッム- - çµ±åˆãƒ†ã‚¹ãƒˆã®ãŸã‚ã® 4.x -next カーãƒãƒ«ãƒ„リー + - Linus ã®ãƒ¡ã‚¤ãƒ³ãƒ©ã‚¤ãƒ³ãƒ„リー + - メジャー番å·ã‚’ã¾ãŸã数本ã®å®‰å®šç‰ˆãƒ„リー + - サブシステム毎ã®ã‚«ãƒ¼ãƒãƒ«ãƒ„リー + - çµ±åˆãƒ†ã‚¹ãƒˆã®ãŸã‚ã® linux-next カーãƒãƒ«ãƒ„リー -4.x カーãƒãƒ«ãƒ„リー +メインラインツリー ~~~~~~~~~~~~~~~~~~ -4.x カーãƒãƒ«ã¯ Linus Torvalds ã«ã‚ˆã£ã¦ãƒ¡ãƒ³ãƒ†ãƒŠãƒ³ã‚¹ã•ã‚Œã€ -https://kernel.org ã® pub/linux/kernel/v4.x/ ディレクトリã«å˜åœ¨ã—ã¾ã™ã€‚ +メインラインツリー㯠Linus Torvalds ã«ã‚ˆã£ã¦ãƒ¡ãƒ³ãƒ†ãƒŠãƒ³ã‚¹ã•ã‚Œã€ +https://kernel.org ã®ãƒªãƒã‚¸ãƒˆãƒªã«å˜åœ¨ã—ã¾ã™ã€‚ ã“ã®é–‹ç™ºãƒ—ãƒã‚»ã‚¹ã¯ä»¥ä¸‹ã®ã¨ãŠã‚Š - - æ–°ã—ã„カーãƒãƒ«ãŒãƒªãƒªãƒ¼ã‚¹ã•ã‚ŒãŸç›´å¾Œã«ã€2週間ã®ç‰¹åˆ¥æœŸé–“ãŒè¨ã‘られ〠ã“ã®æœŸé–“ä¸ã«ã€ãƒ¡ãƒ³ãƒ†ãƒŠé”㯠Linus ã«å¤§ããªå·®åˆ†ã‚’é€ã‚‹ã“ã¨ãŒã§ãã¾ã™ã€‚ - ã“ã®ã‚ˆã†ãªå·®åˆ†ã¯é€šå¸¸ -next カーãƒãƒ«ã«æ•°é€±é–“å«ã¾ã‚Œã¦ããŸãƒ‘ッãƒã§ã™ã€‚ + ã“ã®ã‚ˆã†ãªå·®åˆ†ã¯é€šå¸¸ linux-next カーãƒãƒ«ã«æ•°é€±é–“å«ã¾ã‚Œã¦ããŸãƒ‘ッãƒã§ã™ã€‚ 大ããªå¤‰æ›´ã¯ git(カーãƒãƒ«ã®ã‚½ãƒ¼ã‚¹ç®¡ç†ãƒ„ールã€è©³ç´°ã¯ http://git-scm.com/ å‚ç…§) を使ã£ã¦é€ã‚‹ã®ãŒå¥½ã¾ã—ã„ã‚„ã‚Šæ–¹ã§ã™ãŒã€ãƒ‘ッ ãƒãƒ•ã‚¡ã‚¤ãƒ«ã®å½¢å¼ã®ã¾ã¾é€ã‚‹ã®ã§ã‚‚å分ã§ã™ã€‚ @@ -303,20 +303,18 @@ Andrew Morton ㌠Linux-kernel メーリングリストã«ã‚«ãƒ¼ãƒãƒ«ãƒªãƒªãƒ¼ã å‰ã‚‚ã£ã¦æ±ºã‚られãŸè¨ˆç”»ã«ã‚ˆã£ã¦ãƒªãƒªãƒ¼ã‚¹ã•ã‚Œã‚‹ã‚‚ã®ã§ã¯ãªã„ã‹ã‚‰ ã§ã™ã€‚ã€* -4.x.y -stable カーãƒãƒ«ãƒ„リー -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +メジャー番å·ã‚’ã¾ãŸã数本ã®å®‰å®šç‰ˆãƒ„リー +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ãƒãƒ¼ã‚¸ãƒ§ãƒ³ç•ªå·ãŒ3ã¤ã®æ•°å—ã«åˆ†ã‹ã‚Œã¦ã„るカーãƒãƒ«ã¯ -stable カーãƒãƒ«ã§ã™ã€‚ -ã“ã‚Œã«ã¯ã€4.x カーãƒãƒ«ã§è¦‹ã¤ã‹ã£ãŸã‚»ã‚ュリティå•é¡Œã‚„é‡å¤§ãªå¾Œæˆ»ã‚Šã«å¯¾ã™ -る比較的å°ã•ã„é‡è¦ãªä¿®æ£ãŒå«ã¾ã‚Œã¾ã™ã€‚ +ã“ã‚Œã«ã¯æœ€åˆã®2ã¤ã®ãƒãƒ¼ã‚¸ãƒ§ãƒ³ç•ªå·ã®æ•°å—ã«å¯¾å¿œã—ãŸã€ +メインラインリリースã§è¦‹ã¤ã‹ã£ãŸã‚»ã‚ュリティå•é¡Œã‚„ +é‡å¤§ãªå¾Œæˆ»ã‚Šã«å¯¾ã™ã‚‹æ¯”較的å°ã•ã„é‡è¦ãªä¿®æ£ãŒå«ã¾ã‚Œã¾ã™ã€‚ ã“ã‚Œã¯ã€é–‹ç™º/実験的ãƒãƒ¼ã‚¸ãƒ§ãƒ³ã®ãƒ†ã‚¹ãƒˆã«å”力ã™ã‚‹ã“ã¨ã«èˆˆå‘³ãŒç„¡ãã€æœ€æ–° ã®å®‰å®šã—ãŸã‚«ãƒ¼ãƒãƒ«ã‚’使ã„ãŸã„ユーザã«æŽ¨å¥¨ã™ã‚‹ãƒ–ランãƒã§ã™ã€‚ -ã‚‚ã—ã€4.x.y カーãƒãƒ«ãŒå˜åœ¨ã—ãªã„å ´åˆã«ã¯ã€ç•ªå·ãŒä¸€ç•ªå¤§ãã„ 4.x ãŒæœ€æ–° -ã®å®‰å®šç‰ˆã‚«ãƒ¼ãƒãƒ«ã§ã™ã€‚ - -4.x.y 㯠"stable" ãƒãƒ¼ãƒ <stable@vger.kernel.org> ã§ãƒ¡ãƒ³ãƒ†ã•ã‚Œã¦ãŠã‚Šã€ +安定版ツリーã¯"stable" ãƒãƒ¼ãƒ <stable@vger.kernel.org> ã§ãƒ¡ãƒ³ãƒ†ã•ã‚Œã¦ãŠã‚Šã€ å¿…è¦ã«å¿œã˜ã¦ãƒªãƒªãƒ¼ã‚¹ã•ã‚Œã¾ã™ã€‚通常ã®ãƒªãƒªãƒ¼ã‚¹æœŸé–“㯠2週間毎ã§ã™ãŒã€å·® ã—è¿«ã£ãŸå•é¡ŒãŒãªã‘ã‚Œã°ã‚‚ã†å°‘ã—é•·ããªã‚‹ã“ã¨ã‚‚ã‚ã‚Šã¾ã™ã€‚ã‚»ã‚ュリティ関 連ã®å•é¡Œã®å ´åˆã¯ã“ã‚Œã«å¯¾ã—ã¦ã ã„ãŸã„ã®å ´åˆã€ã™ãã«ãƒªãƒªãƒ¼ã‚¹ãŒã•ã‚Œã¾ã™ã€‚ @@ -326,7 +324,7 @@ Documentation/process/stable-kernel-rules.rst ファイルã«ã¯ã©ã®ã‚ˆã†ãªç é¡žã®å¤‰æ›´ãŒ -stable ツリーã«å—ã‘入れå¯èƒ½ã‹ã€ã¾ãŸãƒªãƒªãƒ¼ã‚¹ãƒ—ãƒã‚»ã‚¹ãŒã©ã† å‹•ãã‹ãŒè¨˜è¿°ã•ã‚Œã¦ã„ã¾ã™ã€‚ -サブシステム毎ã®ã‚«ãƒ¼ãƒãƒ«ãƒ„リーã¨ãƒ‘ッム+サブシステム毎ã®ã‚«ãƒ¼ãƒãƒ«ãƒ„リー ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ãã‚Œãžã‚Œã®ã‚«ãƒ¼ãƒãƒ«ã‚µãƒ–システムã®ãƒ¡ãƒ³ãƒ†ãƒŠé”㯠--- ãã—ã¦å¤šãã®ã‚«ãƒ¼ãƒãƒ« @@ -351,19 +349,19 @@ quilt シリーズã¨ã—ã¦å…¬é–‹ã•ã‚Œã¦ã„るパッãƒã‚ューも使ã‚ã‚Œã ã‘ã‚‹ã“ã¨ãŒã§ãã¾ã™ã€‚大部分ã®ã“れら㮠patchwork ã®ã‚µã‚¤ãƒˆã¯ https://patchwork.kernel.org/ ã§ãƒªã‚¹ãƒˆã•ã‚Œã¦ã„ã¾ã™ã€‚ -çµ±åˆãƒ†ã‚¹ãƒˆã®ãŸã‚ã® 4.x -next カーãƒãƒ«ãƒ„リー -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +çµ±åˆãƒ†ã‚¹ãƒˆã®ãŸã‚ã® linux-next カーãƒãƒ«ãƒ„リー +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -サブシステムツリーã®æ›´æ–°å†…容ãŒãƒ¡ã‚¤ãƒ³ãƒ©ã‚¤ãƒ³ã® 4.x ツリーã«ãƒžãƒ¼ã‚¸ã•ã‚Œã‚‹ +サブシステムツリーã®æ›´æ–°å†…容ãŒãƒ¡ã‚¤ãƒ³ãƒ©ã‚¤ãƒ³ãƒ„リーã«ãƒžãƒ¼ã‚¸ã•ã‚Œã‚‹ å‰ã«ã€ãれらã¯çµ±åˆãƒ†ã‚¹ãƒˆã•ã‚Œã‚‹å¿…è¦ãŒã‚ã‚Šã¾ã™ã€‚ã“ã®ç›®çš„ã®ãŸã‚ã€å®Ÿè³ªçš„㫠全サブシステムツリーã‹ã‚‰ã»ã¼æ¯Žæ—¥ãƒ—ルã•ã‚Œã¦ã§ãる特別ãªãƒ†ã‚¹ãƒˆç”¨ã®ãƒªãƒã‚¸ トリãŒå˜åœ¨ã—ã¾ã™- https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git -ã“ã®ã‚„ã‚Šæ–¹ã«ã‚ˆã£ã¦ã€-next カーãƒãƒ«ã¯æ¬¡ã®ãƒžãƒ¼ã‚¸æ©Ÿä¼šã§ã©ã‚“ãªã‚‚ã®ãŒãƒ¡ã‚¤ãƒ³ -ラインカーãƒãƒ«ã«ãƒžãƒ¼ã‚¸ã•ã‚Œã‚‹ã‹ã€ãŠãŠã¾ã‹ãªã®å±•æœ›ã‚’æä¾›ã—ã¾ã™ã€‚-next カー -ãƒãƒ«ã®å®Ÿè¡Œãƒ†ã‚¹ãƒˆã‚’è¡Œã†å†’険好ããªãƒ†ã‚¹ã‚¿ãƒ¼ã¯å¤§ã„ã«æ“è¿Žã•ã‚Œã¾ã™ã€‚ +ã“ã®ã‚„ã‚Šæ–¹ã«ã‚ˆã£ã¦ã€linux-next ã¯æ¬¡ã®ãƒžãƒ¼ã‚¸æ©Ÿä¼šã§ã©ã‚“ãªã‚‚ã®ãŒãƒ¡ã‚¤ãƒ³ +ラインã«ãƒžãƒ¼ã‚¸ã•ã‚Œã‚‹ã‹ã€ãŠãŠã¾ã‹ãªå±•æœ›ã‚’æä¾›ã—ã¾ã™ã€‚ +linux-next ã®å®Ÿè¡Œãƒ†ã‚¹ãƒˆã‚’è¡Œã†å†’険好ããªãƒ†ã‚¹ã‚¿ãƒ¼ã¯å¤§ã„ã«æ“è¿Žã•ã‚Œã¾ã™ã€‚ ãƒã‚°ãƒ¬ãƒãƒ¼ãƒˆ ------------- diff --git a/Documentation/translations/ja_JP/index.rst b/Documentation/translations/ja_JP/index.rst index 20738c931d02..43b9fb7246d3 100644 --- a/Documentation/translations/ja_JP/index.rst +++ b/Documentation/translations/ja_JP/index.rst @@ -5,7 +5,7 @@ \kerneldocCJKon \kerneldocBeginJP{ -Japanese translations +日本語訳 ===================== .. toctree:: diff --git a/Documentation/translations/zh_CN/admin-guide/mm/damon/reclaim.rst b/Documentation/translations/zh_CN/admin-guide/mm/damon/reclaim.rst index 9e541578f38d..1500bdbf338a 100644 --- a/Documentation/translations/zh_CN/admin-guide/mm/damon/reclaim.rst +++ b/Documentation/translations/zh_CN/admin-guide/mm/damon/reclaim.rst @@ -53,8 +53,8 @@ DAMON_RECLAIM找到在特定时间内没有被访问的内å˜åŒºåŸŸå¹¶åˆ†é¡µã€‚ä 下é¢æ˜¯æ¯ä¸ªå‚æ•°çš„æ述。 -enable ------- +enabled +------- å¯ç”¨æˆ–ç¦ç”¨DAMON_RECLAIM。 diff --git a/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst b/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst index 5d7533347216..eee0e8c5c368 100644 --- a/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst +++ b/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst @@ -13,7 +13,7 @@ 详细用法 ======== -DAMON 为ä¸åŒçš„用户æ供了下é¢ä¸‰ç§æŽ¥å£ã€‚ +DAMON 为ä¸åŒçš„用户æ供了下é¢è¿™äº›æŽ¥å£ã€‚ - *DAMON用户空间工具。* `è¿™ <https://github.com/awslabs/damo>`_ 为有这特æƒçš„人, 如系统管ç†å‘˜ï¼Œå¸Œæœ›æœ‰ä¸€ä¸ªåˆšå¥½ @@ -21,19 +21,290 @@ DAMON 为ä¸åŒçš„用户æ供了下é¢ä¸‰ç§æŽ¥å£ã€‚ 使用它,用户å¯ä»¥ä»¥äººæ€§åŒ–çš„æ–¹å¼ä½¿ç”¨DAMON的主è¦åŠŸèƒ½ã€‚ä¸è¿‡ï¼Œå®ƒå¯èƒ½ä¸ä¼šä¸ºç‰¹æ®Šæƒ…况进行高度调整。 它åŒæ—¶æ”¯æŒè™šæ‹Ÿå’Œç‰©ç†åœ°å€ç©ºé—´çš„监测。更多细节,请å‚考它的 `使用文档 <https://github.com/awslabs/damo/blob/next/USAGE.md>`_。 -- *debugfs接å£ã€‚* - :ref:`è¿™ <debugfs_interface>` 是为那些希望更高级的使用DAMON的特æƒç”¨æˆ·ç©ºé—´ç¨‹åºå‘˜å‡†å¤‡çš„。 - 使用它,用户å¯ä»¥é€šè¿‡è¯»å–和写入特殊的debugfs文件æ¥ä½¿ç”¨DAMON的主è¦åŠŸèƒ½ã€‚å› æ¤ï¼Œä½ å¯ä»¥ç¼–写和使 - ç”¨ä½ ä¸ªæ€§åŒ–çš„DAMON debugfs包装程åºï¼Œä»£æ›¿ä½ 读/写debugfs文件。 `DAMON用户空间工具 +- *sysfs接å£ã€‚* + :ref:`è¿™ <sysfs_interface>` 是为那些希望更高级的使用DAMON的特æƒç”¨æˆ·ç©ºé—´ç¨‹åºå‘˜å‡†å¤‡çš„。 + 使用它,用户å¯ä»¥é€šè¿‡è¯»å–和写入特殊的sysfs文件æ¥ä½¿ç”¨DAMON的主è¦åŠŸèƒ½ã€‚å› æ¤ï¼Œä½ å¯ä»¥ç¼–写和使 + ç”¨ä½ ä¸ªæ€§åŒ–çš„DAMON sysfs包装程åºï¼Œä»£æ›¿ä½ 读/写sysfs文件。 `DAMON用户空间工具 <https://github.com/awslabs/damo>`_ 就是这ç§ç¨‹åºçš„一个例å 它åŒæ—¶æ”¯æŒè™šæ‹Ÿå’Œç‰©ç†åœ°å€ 空间的监测。注æ„,这个界é¢åªæ供简å•çš„监测结果 :ref:`统计 <damos_stats>`。对于详细的监测 结果,DAMONæ供了一个:ref:`跟踪点 <tracepoint>`。 - +- *debugfs interface.* + :ref:`è¿™ <debugfs_interface>` å‡ ä¹Žä¸Ž:ref:`sysfs interface <sysfs_interface>` 接 + å£ç›¸åŒã€‚这将在下一个LTSå†…æ ¸å‘布åŽè¢«ç§»é™¤ï¼Œæ‰€ä»¥ç”¨æˆ·åº”该转移到 + :ref:`sysfs interface <sysfs_interface>`。 - *å†…æ ¸ç©ºé—´ç¼–ç¨‹æŽ¥å£ã€‚* - :doc:`This </vm/damon/api>` è¿™æ˜¯ä¸ºå†…æ ¸ç©ºé—´ç¨‹åºå‘˜å‡†å¤‡çš„。使用它,用户å¯ä»¥é€šè¿‡ä¸ºä½ 编写内 + :doc:`è¿™ </vm/damon/api>` è¿™æ˜¯ä¸ºå†…æ ¸ç©ºé—´ç¨‹åºå‘˜å‡†å¤‡çš„。使用它,用户å¯ä»¥é€šè¿‡ä¸ºä½ 编写内 æ ¸ç©ºé—´çš„DAMON应用程åºï¼Œæœ€çµæ´»æœ‰æ•ˆåœ°åˆ©ç”¨DAMONçš„æ¯ä¸€ä¸ªåŠŸèƒ½ã€‚ä½ ç”šè‡³å¯ä»¥ä¸ºå„ç§åœ°å€ç©ºé—´æ‰©å±•DAMON。 详细情况请å‚è€ƒæŽ¥å£ :doc:`文件 </vm/damon/api>`。 +sysfsæŽ¥å£ +========= +DAMONçš„sysfs接å£æ˜¯åœ¨å®šä¹‰ ``CONFIG_DAMON_SYSFS`` 时建立的。它在其sysfs目录下创建多 +个目录和文件, ``<sysfs>/kernel/mm/damon/`` ã€‚ä½ å¯ä»¥é€šè¿‡å¯¹è¯¥ç›®å½•ä¸‹çš„文件进行写入和 +读å–æ¥æŽ§åˆ¶DAMON。 + +对于一个简çŸçš„例å,用户å¯ä»¥ç›‘测一个给定工作负载的虚拟地å€ç©ºé—´ï¼Œå¦‚下所示:: + + # cd /sys/kernel/mm/damon/admin/ + # echo 1 > kdamonds/nr && echo 1 > kdamonds/0/contexts/nr + # echo vaddr > kdamonds/0/contexts/0/operations + # echo 1 > kdamonds/0/contexts/0/targets/nr + # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid + # echo on > kdamonds/0/state + +文件层次结构 +------------ + +DAMON sysfs接å£çš„文件层次结构如下图所示。在下图ä¸ï¼Œçˆ¶å关系用缩进表示,æ¯ä¸ªç›®å½•æœ‰ +``/`` åŽç¼€ï¼Œæ¯ä¸ªç›®å½•ä¸çš„文件用逗å·ï¼ˆ",")分开。 :: + + /sys/kernel/mm/damon/admin + │ kdamonds/nr_kdamonds + │ │ 0/state,pid + │ │ │ contexts/nr_contexts + │ │ │ │ 0/operations + │ │ │ │ │ monitoring_attrs/ + │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us + │ │ │ │ │ │ nr_regions/min,max + │ │ │ │ │ targets/nr_targets + │ │ │ │ │ │ 0/pid_target + │ │ │ │ │ │ │ regions/nr_regions + │ │ │ │ │ │ │ │ 0/start,end + │ │ │ │ │ │ │ │ ... + │ │ │ │ │ │ ... + │ │ │ │ │ schemes/nr_schemes + │ │ │ │ │ │ 0/action + │ │ │ │ │ │ │ access_pattern/ + │ │ │ │ │ │ │ │ sz/min,max + │ │ │ │ │ │ │ │ nr_accesses/min,max + │ │ │ │ │ │ │ │ age/min,max + │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms + │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil + │ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low + │ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds + │ │ │ │ │ │ ... + │ │ │ │ ... + │ │ ... + +æ ¹ +-- + +DAMON sysfs接å£çš„æ ¹æ˜¯ ``<sysfs>/kernel/mm/damon/`` ,它有一个å为 ``admin`` çš„ +目录。该目录包å«ç‰¹æƒç”¨æˆ·ç©ºé—´ç¨‹åºæŽ§åˆ¶DAMONçš„æ–‡ä»¶ã€‚æ‹¥æœ‰æ ¹æƒé™çš„用户空间工具或deamonså¯ä»¥ +使用这个目录。 + +kdamonds/ +--------- + +与监测相关的信æ¯åŒ…æ‹¬è¯·æ±‚è§„æ ¼å’Œç»“æžœè¢«ç§°ä¸ºDAMON上下文。DAMON用一个å«åškdamondçš„å†…æ ¸çº¿ç¨‹ +执行æ¯ä¸ªä¸Šä¸‹æ–‡ï¼Œå¤šä¸ªkdamondså¯ä»¥å¹¶è¡Œè¿è¡Œã€‚ + +在 ``admin`` 目录下,有一个目录,å³``kdamonds``,它有控制kdamonds的文件å˜åœ¨ã€‚在开始 +时,这个目录åªæœ‰ä¸€ä¸ªæ–‡ä»¶ï¼Œ``nr_kdamonds``。å‘该文件写入一个数å—(``N``),就会创建å为 +``0`` 到 ``N-1`` çš„å目录数é‡ã€‚æ¯ä¸ªç›®å½•ä»£è¡¨æ¯ä¸ªkdamond。 + +kdamonds/<N>/ +------------- + +在æ¯ä¸ªkdamond目录ä¸ï¼Œå˜åœ¨ä¸¤ä¸ªæ–‡ä»¶ï¼ˆ``state`` å’Œ ``pid`` )和一个目录( ``contexts`` )。 + +è¯»å– ``state`` 时,如果kdamond当å‰æ£åœ¨è¿è¡Œï¼Œåˆ™è¿”回 ``on`` ,如果没有è¿è¡Œåˆ™è¿”回 ``off`` 。 +写入 ``on`` 或 ``off`` 使kdamond处于状æ€ã€‚å‘ ``state`` 文件写 ``update_schemes_stats`` , +æ›´æ–°kdamondçš„æ¯ä¸ªåŸºäºŽDAMONçš„æ“作方案的统计文件的内容。关于统计信æ¯çš„细节,请å‚考 +:ref:`stats section <sysfs_schemes_stats>`. + +如果状æ€ä¸º ``on``ï¼Œè¯»å– ``pid`` 显示kdamond线程的pid。 + +``contexts`` 目录包å«æŽ§åˆ¶è¿™ä¸ªkdamondè¦æ‰§è¡Œçš„监测上下文的文件。 + +kdamonds/<N>/contexts/ +---------------------- + +在开始时,这个目录åªæœ‰ä¸€ä¸ªæ–‡ä»¶ï¼Œå³ ``nr_contexts`` 。å‘该文件写入一个数å—( ``N`` ),就会创 +建å为``0`` 到 ``N-1`` çš„å目录数é‡ã€‚æ¯ä¸ªç›®å½•ä»£è¡¨æ¯ä¸ªç›‘测背景。目å‰ï¼Œæ¯ä¸ªkdamondåªæ”¯æŒ +一个上下文,所以åªæœ‰ ``0`` 或 ``1`` å¯ä»¥è¢«å†™å…¥æ–‡ä»¶ã€‚ + +contexts/<N>/ +------------- + +在æ¯ä¸ªä¸Šä¸‹æ–‡ç›®å½•ä¸ï¼Œå˜åœ¨ä¸€ä¸ªæ–‡ä»¶(``operations``)和三个目录(``monitoring_attrs``, +``targets``, å’Œ ``schemes``)。 + +DAMON支æŒå¤šç§ç±»åž‹çš„监测æ“作,包括对虚拟地å€ç©ºé—´å’Œç‰©ç†åœ°å€ç©ºé—´çš„ç›‘æµ‹ã€‚ä½ å¯ä»¥é€šè¿‡å‘文件 +ä¸å†™å…¥ä»¥ä¸‹å…³é”®è¯ä¹‹ä¸€ï¼Œå¹¶ä»Žæ–‡ä»¶ä¸è¯»å–,æ¥è®¾ç½®å’ŒèŽ·å–DAMON将为上下文使用何ç§ç±»åž‹çš„监测æ“作。 + + - vaddr: 监测特定进程的虚拟地å€ç©ºé—´ + - paddr: 监视系统的物ç†åœ°å€ç©ºé—´ + +contexts/<N>/monitoring_attrs/ +------------------------------ + +用于指定监测属性的文件,包括所需的监测质é‡å’Œæ•ˆçŽ‡ï¼Œéƒ½åœ¨ ``monitoring_attrs`` 目录ä¸ã€‚ +具体æ¥è¯´ï¼Œè¿™ä¸ªç›®å½•ä¸‹æœ‰ä¸¤ä¸ªç›®å½•ï¼Œå³ ``intervals`` å’Œ ``nr_regions`` 。 + +在 ``intervals`` 目录下,å˜åœ¨DAMONçš„é‡‡æ ·é—´éš”(``sample_us``)ã€èšé›†é—´éš”(``aggr_us``) +和更新间隔(``update_us``)ä¸‰ä¸ªæ–‡ä»¶ã€‚ä½ å¯ä»¥é€šè¿‡å†™å…¥å’Œè¯»å‡ºè¿™äº›æ–‡ä»¶æ¥è®¾ç½®å’ŒèŽ·å–微秒级的值。 + +在 ``nr_regions`` 目录下,有两个文件分别用于DAMON监测区域的下é™å’Œä¸Šé™ï¼ˆ``min`` å’Œ ``max`` ), +这两个文件控制ç€ç›‘æµ‹çš„å¼€é”€ã€‚ä½ å¯ä»¥é€šè¿‡å‘这些文件的写入和读出æ¥è®¾ç½®å’ŒèŽ·å–这些值。 + +关于间隔和监测区域范围的更多细节,请å‚考设计文件 (:doc:`/vm/damon/design`)。 + +contexts/<N>/targets/ +--------------------- + +在开始时,这个目录åªæœ‰ä¸€ä¸ªæ–‡ä»¶ ``nr_targets`` 。å‘该文件写入一个数å—(``N``),就å¯ä»¥åˆ›å»º +å为 ``0`` 到 ``N-1`` çš„å目录的数é‡ã€‚æ¯ä¸ªç›®å½•ä»£è¡¨æ¯ä¸ªç›‘æµ‹ç›®æ ‡ã€‚ + +targets/<N>/ +------------ + +在æ¯ä¸ªç›®æ ‡ç›®å½•ä¸ï¼Œå˜åœ¨ä¸€ä¸ªæ–‡ä»¶(``pid_target``)和一个目录(``regions``)。 + +å¦‚æžœä½ æŠŠ ``vaddr`` 写到 ``contexts/<N>/operations`` ä¸ï¼Œæ¯ä¸ªç›®æ ‡åº”è¯¥æ˜¯ä¸€ä¸ªè¿›ç¨‹ã€‚ä½ +å¯ä»¥é€šè¿‡å°†è¿›ç¨‹çš„pid写到 ``pid_target`` 文件ä¸æ¥æŒ‡å®šDAMON的进程。 + +targets/<N>/regions +------------------- + +当使用 ``vaddr`` 监测æ“作集时( ``vaddr`` 被写入 ``contexts/<N>/operations`` æ–‡ +件),DAMONè‡ªåŠ¨è®¾ç½®å’Œæ›´æ–°ç›‘æµ‹ç›®æ ‡åŒºåŸŸï¼Œè¿™æ ·å°±å¯ä»¥è¦†ç›–ç›®æ ‡è¿›ç¨‹çš„æ•´ä¸ªå†…å˜æ˜ å°„ã€‚ç„¶è€Œï¼Œç”¨æˆ·å¯ +能希望将åˆå§‹ç›‘测区域设置为特定的地å€èŒƒå›´ã€‚ + +相å,当使用 ``paddr`` 监测æ“作集时,DAMONä¸ä¼šè‡ªåŠ¨è®¾ç½®å’Œæ›´æ–°ç›‘æµ‹ç›®æ ‡åŒºåŸŸï¼ˆ ``paddr`` +被写入 ``contexts/<N>/operations`` ä¸ï¼‰ã€‚å› æ¤ï¼Œåœ¨è¿™ç§æƒ…å†µä¸‹ï¼Œç”¨æˆ·åº”è¯¥è‡ªå·±è®¾ç½®ç›‘æµ‹ç›®æ ‡ +区域。 + +在这ç§æƒ…况下,用户å¯ä»¥æŒ‰ç…§è‡ªå·±çš„æ„愿明确设置åˆå§‹ç›‘æµ‹ç›®æ ‡åŒºåŸŸï¼Œå°†é€‚å½“çš„å€¼å†™å…¥è¯¥ç›®å½•ä¸‹çš„æ–‡ä»¶ã€‚ + +开始时,这个目录åªæœ‰ä¸€ä¸ªæ–‡ä»¶ï¼Œ ``nr_regions`` 。å‘该文件写入一个数å—(``N``),就å¯ä»¥åˆ› +建å为 ``0`` 到 ``N-1`` çš„å目录。æ¯ä¸ªç›®å½•ä»£è¡¨æ¯ä¸ªåˆå§‹ç›‘æµ‹ç›®æ ‡åŒºåŸŸã€‚ + +regions/<N>/ +------------ + +在æ¯ä¸ªåŒºåŸŸç›®å½•ä¸ï¼Œä½ 会å‘现两个文件( ``start`` å’Œ ``end`` ï¼‰ã€‚ä½ å¯ä»¥é€šè¿‡å‘文件写入 +和从文件ä¸è¯»å‡ºï¼Œåˆ†åˆ«è®¾ç½®å’ŒèŽ·å¾—åˆå§‹ç›‘æµ‹ç›®æ ‡åŒºåŸŸçš„èµ·å§‹å’Œç»“æŸåœ°å€ã€‚ + +contexts/<N>/schemes/ +--------------------- + +对于一版的基于DAMONçš„æ•°æ®è®¿é—®æ„ŸçŸ¥çš„内å˜ç®¡ç†ä¼˜åŒ–,用户通常希望系统对特定访问模å¼çš„内å˜åŒº +域应用内å˜ç®¡ç†æ“作。DAMON从用户那里接收这ç§å½¢å¼åŒ–çš„æ“ä½œæ–¹æ¡ˆï¼Œå¹¶å°†è¿™äº›æ–¹æ¡ˆåº”ç”¨äºŽç›®æ ‡å†…å˜ +区域。用户å¯ä»¥é€šè¿‡è¯»å–和写入这个目录下的文件æ¥èŽ·å¾—和设置这些方案。 + +在开始时,这个目录åªæœ‰ä¸€ä¸ªæ–‡ä»¶ï¼Œ``nr_schemes``。å‘该文件写入一个数å—(``N``),就å¯ä»¥ +创建å为``0``到``N-1``çš„å目录的数é‡ã€‚æ¯ä¸ªç›®å½•ä»£è¡¨æ¯ä¸ªåŸºäºŽDAMONçš„æ“作方案。 + +schemes/<N>/ +------------ + +在æ¯ä¸ªæ–¹æ¡ˆç›®å½•ä¸ï¼Œå˜åœ¨å››ä¸ªç›®å½•(``access_pattern``, ``quotas``,``watermarks``, +å’Œ ``stats``)和一个文件(``action``)。 + +``action`` 文件用于设置和获å–ä½ æƒ³åº”ç”¨äºŽå…·æœ‰ç‰¹å®šè®¿é—®æ¨¡å¼çš„内å˜åŒºåŸŸçš„动作。å¯ä»¥å†™å…¥æ–‡ä»¶ +和从文件ä¸è¯»å–的关键è¯åŠå…¶å«ä¹‰å¦‚下。 + + - ``willneed``: 对有 ``MADV_WILLNEED`` 的区域调用 ``madvise()`` 。 + - ``cold``: 对具有 ``MADV_COLD`` 的区域调用 ``madvise()`` 。 + - ``pageout``: 为具有 ``MADV_PAGEOUT`` 的区域调用 ``madvise()`` 。 + - ``hugepage``: 为带有 ``MADV_HUGEPAGE`` 的区域调用 ``madvise()`` 。 + - ``nohugepage``: 为带有 ``MADV_NOHUGEPAGE`` 的区域调用 ``madvise()``。 + - ``stat``: 什么都ä¸åšï¼Œåªè®¡ç®—ç»Ÿè®¡æ•°æ® + +schemes/<N>/access_pattern/ +--------------------------- + +æ¯ä¸ªåŸºäºŽDAMONçš„æ“ä½œæ–¹æ¡ˆçš„ç›®æ ‡è®¿é—®æ¨¡å¼ç”±ä¸‰ä¸ªèŒƒå›´æž„æˆï¼ŒåŒ…括以å—节为å•ä½çš„区域大å°ã€æ¯ä¸ª +èšåˆåŒºé—´çš„监测访问次数和区域年龄的èšåˆåŒºé—´æ•°ã€‚ + +在 ``access_pattern`` 目录下,å˜åœ¨ä¸‰ä¸ªç›®å½•ï¼ˆ ``sz``, ``nr_accesses``, å’Œ ``age`` ), +æ¯ä¸ªç›®å½•æœ‰ä¸¤ä¸ªæ–‡ä»¶ï¼ˆ``min`` å’Œ ``max`` ï¼‰ã€‚ä½ å¯ä»¥é€šè¿‡å‘ ``sz``, ``nr_accesses``, å’Œ +``age`` 目录下的 ``min`` å’Œ ``max`` 文件分别写入和读å–æ¥è®¾ç½®å’ŒèŽ·å–给定方案的访问模å¼ã€‚ + +schemes/<N>/quotas/ +------------------- + +æ¯ä¸ª ``动作`` 的最佳 ``ç›®æ ‡è®¿é—®æ¨¡å¼`` å–决于工作负载,所以ä¸å®¹æ˜“找到。更糟糕的是,将æŸäº›åŠ¨ä½œ +çš„æ–¹æ¡ˆè®¾ç½®å¾—è¿‡äºŽæ¿€è¿›ä¼šé€ æˆä¸¥é‡çš„开销。为了é¿å…è¿™ç§å¼€é”€ï¼Œç”¨æˆ·å¯ä»¥ä¸ºæ¯ä¸ªæ–¹æ¡ˆé™åˆ¶æ—¶é—´å’Œå¤§å°é…é¢ã€‚ +具体æ¥è¯´ï¼Œç”¨æˆ·å¯ä»¥è¦æ±‚DAMONå°½é‡åªä½¿ç”¨ç‰¹å®šçš„时间(``时间é…é¢``)æ¥åº”用行动,并且在给定的时间间 +隔(``é‡ç½®é—´éš”``)内,åªå¯¹å…·æœ‰ç›®æ ‡è®¿é—®æ¨¡å¼çš„内å˜åŒºåŸŸåº”用行动,而ä¸ä½¿ç”¨ç‰¹å®šæ•°é‡ï¼ˆ``大å°é…é¢``)。 + +当预计超过é…é¢é™åˆ¶æ—¶ï¼ŒDAMONä¼šæ ¹æ® ``ç›®æ ‡è®¿é—®æ¨¡å¼`` 的大å°ã€è®¿é—®é¢‘率和年龄,对找到的内å˜åŒºåŸŸ +进行优先排åºã€‚为了进行个性化的优先排åºï¼Œç”¨æˆ·å¯ä»¥ä¸ºè¿™ä¸‰ä¸ªå±žæ€§è®¾ç½®æƒé‡ã€‚ + +在 ``quotas`` 目录下,å˜åœ¨ä¸‰ä¸ªæ–‡ä»¶ï¼ˆ``ms``, ``bytes``, ``reset_interval_ms``)和一个 +目录(``weights``),其ä¸æœ‰ä¸‰ä¸ªæ–‡ä»¶(``sz_permil``, ``nr_accesses_permil``, å’Œ +``age_permil``)。 + +ä½ å¯ä»¥è®¾ç½®ä»¥æ¯«ç§’为å•ä½çš„ ``时间é…é¢`` ,以å—节为å•ä½çš„ ``大å°é…é¢`` ,以åŠä»¥æ¯«ç§’为å•ä½çš„ ``é‡ +置间隔`` ,分别å‘è¿™ä¸‰ä¸ªæ–‡ä»¶å†™å…¥æ•°å€¼ã€‚ä½ è¿˜å¯ä»¥é€šè¿‡å‘ ``weights`` 目录下的三个文件写入数值æ¥è®¾ +置大å°ã€è®¿é—®é¢‘率和年龄的优先æƒï¼Œå•ä½ä¸ºåƒåˆ†ä¹‹ä¸€ã€‚ + +schemes/<N>/watermarks/ +----------------------- + +ä¸ºäº†ä¾¿äºŽæ ¹æ®ç³»ç»ŸçŠ¶æ€æ¿€æ´»å’Œåœç”¨æ¯ä¸ªæ–¹æ¡ˆï¼ŒDAMONæ供了一个称为水ä½çš„功能。该功能接收五个值,称为 +``度é‡`` ã€``é—´éš”`` ã€``高`` ã€``ä¸`` ã€``低`` 。``度é‡å€¼`` 是指å¯ä»¥æµ‹é‡çš„系统度é‡å€¼ï¼Œå¦‚ +自由内å˜æ¯”率。如果系统的度é‡å€¼ ``高`` 于memoent的高值或 ``低`` 于低值,则该方案被åœç”¨ã€‚如果 +该值低于 ``ä¸`` ,则该方案被激活。 + +在水ä½ç›®å½•ä¸‹ï¼Œå˜åœ¨äº”个文件(``metric``, ``interval_us``,``high``, ``mid``, and ``low``) +用于设置æ¯ä¸ªå€¼ã€‚ä½ å¯ä»¥é€šè¿‡å‘这些文件的写入æ¥åˆ†åˆ«è®¾ç½®å’ŒèŽ·å–这五个值。 + +å¯ä»¥å†™å…¥ ``metric`` 文件的关键è¯å’Œå«ä¹‰å¦‚下。 + + - none: å¿½ç•¥æ°´ä½ + - free_mem_rate: 系统的自由内å˜çŽ‡ï¼ˆåƒåˆ†æ¯”)。 + +``interval`` 应以微秒为å•ä½å†™å…¥ã€‚ + +schemes/<N>/stats/ +------------------ + +DAMON统计æ¯ä¸ªæ–¹æ¡ˆè¢«å°è¯•åº”用的区域的总数é‡å’Œå—节数,æ¯ä¸ªæ–¹æ¡ˆè¢«æˆåŠŸåº”用的区域的两个数å—ï¼Œä»¥åŠ +超过é…é¢é™åˆ¶çš„总数é‡ã€‚这些统计数æ®å¯ç”¨äºŽåœ¨çº¿åˆ†æžæˆ–调整方案。 + +å¯ä»¥é€šè¿‡è¯»å– ``stats`` 目录下的文件(``nr_tried``, ``sz_tried``, ``nr_applied``, +``sz_applied``, å’Œ ``qt_exceeds``))分别检索这些统计数æ®ã€‚这些文件ä¸æ˜¯å®žæ—¶æ›´æ–°çš„,所以 +ä½ åº”è¯¥è¦æ±‚DAMON sysfs接å£é€šè¿‡åœ¨ç›¸å…³çš„ ``kdamonds/<N>/state`` 文件ä¸å†™å…¥ä¸€ä¸ªç‰¹æ®Šçš„å…³é”®å— +``update_schemes_stats`` æ¥æ›´æ–°ç»Ÿè®¡ä¿¡æ¯çš„文件内容。 + +用例 +~~~~ + +下é¢çš„命令应用了一个方案:â€å¦‚果一个大å°ä¸º[4KiB, 8KiB]的内å˜åŒºåŸŸåœ¨[10, 20]çš„èšåˆæ—¶é—´é—´éš”内 +显示出æ¯ä¸€ä¸ªèšåˆæ—¶é—´é—´éš”[0, 5]的访问é‡ï¼Œè¯·åˆ†é¡µè¯¥åŒºåŸŸã€‚对于分页,æ¯ç§’最多åªèƒ½ä½¿ç”¨10msï¼Œè€Œä¸”æ¯ +秒分页ä¸èƒ½è¶…过1GiB。在这一é™åˆ¶ä¸‹ï¼Œé¦–先分页出具有较长年龄的内å˜åŒºåŸŸã€‚å¦å¤–,æ¯5秒钟检查一次系统 +çš„å¯ç”¨å†…å˜çŽ‡ï¼Œå½“å¯ç”¨å†…å˜çŽ‡ä½ŽäºŽ50%时开始监测和分页,但如果å¯ç”¨å†…å˜çŽ‡å¤§äºŽ60%,或低于30%ï¼Œåˆ™åœ +æ¢ç›‘测。“ :: + + # cd <sysfs>/kernel/mm/damon/admin + # # populate directories + # echo 1 > kdamonds/nr_kdamonds; echo 1 > kdamonds/0/contexts/nr_contexts; + # echo 1 > kdamonds/0/contexts/0/schemes/nr_schemes + # cd kdamonds/0/contexts/0/schemes/0 + # # set the basic access pattern and the action + # echo 4096 > access_patterns/sz/min + # echo 8192 > access_patterns/sz/max + # echo 0 > access_patterns/nr_accesses/min + # echo 5 > access_patterns/nr_accesses/max + # echo 10 > access_patterns/age/min + # echo 20 > access_patterns/age/max + # echo pageout > action + # # set quotas + # echo 10 > quotas/ms + # echo $((1024*1024*1024)) > quotas/bytes + # echo 1000 > quotas/reset_interval_ms + # # set watermark + # echo free_mem_rate > watermarks/metric + # echo 5000000 > watermarks/interval_us + # echo 600 > watermarks/high + # echo 500 > watermarks/mid + # echo 300 > watermarks/low + +请注æ„,我们强烈建议使用用户空间的工具,如 `damo <https://github.com/awslabs/damo>`_ , +而ä¸æ˜¯åƒä¸Šé¢é‚£æ ·æ‰‹åŠ¨è¯»å†™æ–‡ä»¶ã€‚以上åªæ˜¯ä¸€ä¸ªä¾‹å。 debugfsæŽ¥å£ =========== @@ -46,7 +317,7 @@ DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``, 属性 ---- -用户å¯ä»¥é€šè¿‡è¯»å–和写入 ``attrs`` 文件获得和设置 ``é‡‡æ ·é—´éš”`` 〠``èšé›†é—´éš”`` 〠``区域更新间隔`` +用户å¯ä»¥é€šè¿‡è¯»å–和写入 ``attrs`` 文件获得和设置 ``é‡‡æ ·é—´éš”`` 〠``èšé›†é—´éš”`` 〠``æ›´æ–°é—´éš”`` 以åŠç›‘æµ‹ç›®æ ‡åŒºåŸŸçš„æœ€å°/最大数é‡ã€‚è¦è¯¦ç»†äº†è§£ç›‘测属性,请å‚考 `:doc:/vm/damon/design` 。例如, 下é¢çš„命令将这些值设置为5msã€100msã€1000msã€10å’Œ1000,然åŽå†æ¬¡æ£€æŸ¥:: @@ -108,8 +379,8 @@ DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``, 1 20 40 1 50 100" > init_regions -请注æ„,这åªæ˜¯è®¾ç½®äº†åˆå§‹çš„ç›‘æµ‹ç›®æ ‡åŒºåŸŸã€‚åœ¨è™šæ‹Ÿå†…å˜ç›‘测的情况下,DAMON会在一个 ``区域更新间隔`` -åŽè‡ªåŠ¨æ›´æ–°åŒºåŸŸçš„è¾¹ç•Œã€‚å› æ¤ï¼Œåœ¨è¿™ç§æƒ…况下,如果用户ä¸å¸Œæœ›æ›´æ–°çš„è¯ï¼Œåº”该把 ``区域的更新间隔`` 设 +请注æ„,这åªæ˜¯è®¾ç½®äº†åˆå§‹çš„ç›‘æµ‹ç›®æ ‡åŒºåŸŸã€‚åœ¨è™šæ‹Ÿå†…å˜ç›‘测的情况下,DAMON会在一个 ``æ›´æ–°é—´éš”`` +åŽè‡ªåŠ¨æ›´æ–°åŒºåŸŸçš„è¾¹ç•Œã€‚å› æ¤ï¼Œåœ¨è¿™ç§æƒ…况下,如果用户ä¸å¸Œæœ›æ›´æ–°çš„è¯ï¼Œåº”该把 ``æ›´æ–°é—´éš”`` 设 置得足够大。 diff --git a/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst new file mode 100644 index 000000000000..17b5ce85a90c --- /dev/null +++ b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst @@ -0,0 +1,167 @@ +.. highlight:: none + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/dev-tools/gdb-kernel-debugging.rst +:Translator: 高超 gao chao <gaochao49@huawei.com> + +通过gdbè°ƒè¯•å†…æ ¸å’Œæ¨¡å— +===================== + +Kgdbå†…æ ¸è°ƒè¯•å™¨ã€QEMUç‰è™šæ‹Ÿæœºç®¡ç†ç¨‹åºæˆ–基于JTAG的硬件接å£ï¼Œæ”¯æŒåœ¨è¿è¡Œæ—¶ä½¿ç”¨gdb +调试Linuxå†…æ ¸åŠå…¶æ¨¡å—。Gdbæ供了一个强大的python脚本接å£ï¼Œå†…æ ¸ä¹Ÿæ供了一套 +è¾…åŠ©è„šæœ¬ä»¥ç®€åŒ–å…¸åž‹çš„å†…æ ¸è°ƒè¯•æ¥éª¤ã€‚本文档为如何å¯ç”¨å’Œä½¿ç”¨è¿™äº›è„šæœ¬æ供了一个简è¦çš„教程。 +æ¤æ•™ç¨‹åŸºäºŽQEMU/KVM虚拟机,但文ä¸ç¤ºä¾‹ä¹Ÿé€‚用于其他gdb stub。 + + +环境é…ç½®è¦æ±‚ +------------ + +- gdb 7.2+ (推è版本: 7.4+) 且开å¯pythonæ”¯æŒ (通常å‘行版上都已支æŒ) + +设置 +---- + +- 创建一个QEMU/KVMçš„linux虚拟机(详情请å‚考 www.linux-kvm.org å’Œ www.qemu.org )。 + 对于交å‰å¼€å‘,https://landley.net/aboriginal/bin æ供了一些镜åƒå’Œå·¥å…·é“¾ï¼Œ + å¯ä»¥å¸®åŠ©æ建交å‰å¼€å‘环境。 + +- ç¼–è¯‘å†…æ ¸æ—¶å¼€å¯CONFIG_GDB_SCRIPTS,关é—CONFIG_DEBUG_INFO_REDUCED。 + 如果架构支æŒCONFIG_FRAME_POINTER,请ä¿æŒå¼€å¯ã€‚ + +- 在guestçŽ¯å¢ƒä¸Šå®‰è£…è¯¥å†…æ ¸ã€‚å¦‚æœ‰å¿…è¦ï¼Œé€šè¿‡åœ¨å†…æ ¸command lineä¸æ·»åŠ “nokaslrâ€æ¥å…³é—KASLR。 + æ¤å¤–,QEMUå…许通过-kernelã€-appendã€-initrd这些命令行选项直接å¯åŠ¨å†…æ ¸ã€‚ + 但这通常仅在ä¸ä¾èµ–å†…æ ¸æ¨¡å—æ—¶æ‰æœ‰æ•ˆã€‚有关æ¤æ¨¡å¼çš„更多详细信æ¯ï¼Œè¯·å‚阅QEMU文档。 + 在这ç§æƒ…况下,如果架构支æŒKASLR,应该在ç¦ç”¨CONFIG_RANDOMIZE_BASEçš„æƒ…å†µä¸‹æž„å»ºå†…æ ¸ã€‚ + +- å¯ç”¨QEMU/KVMçš„gdb stub,å¯ä»¥é€šè¿‡å¦‚下方å¼å®žçŽ° + + - 在VMå¯åŠ¨æ—¶ï¼Œé€šè¿‡åœ¨QEMU命令行ä¸æ·»åŠ “-sâ€å‚æ•° + + 或 + + - 在è¿è¡Œæ—¶é€šè¿‡ä»ŽQEMU监视控制å°å‘é€â€œgdbserver†+ +- 切æ¢åˆ°/path/to/linux-build(å†…æ ¸æºç 编译)目录 + +- å¯åŠ¨gdb:gdb vmlinux + + 注æ„:æŸäº›å‘行版å¯èƒ½ä¼šå°†gdbè„šæœ¬çš„è‡ªåŠ¨åŠ è½½é™åˆ¶åœ¨å·²çŸ¥çš„安全目录ä¸ã€‚ + 如果gdb报告拒ç»åŠ è½½vmlinux-gdb.py(相关命令找ä¸åˆ°ï¼‰ï¼Œè¯·å°†:: + + add-auto-load-safe-path /path/to/linux-build + + æ·»åŠ åˆ°~/.gdbinit。更多详细信æ¯ï¼Œè¯·å‚阅gdb帮助信æ¯ã€‚ + +- 连接到已å¯åŠ¨çš„guest环境:: + + (gdb) target remote :1234 + + +使用Linuxæ供的gdb脚本的示例 +---------------------------- + +- åŠ è½½æ¨¡å—(以åŠä¸»å†…æ ¸ï¼‰ç¬¦å·:: + + (gdb) lx-symbols + loading vmlinux + scanning for modules in /home/user/linux/build + loading @0xffffffffa0020000: /home/user/linux/build/net/netfilter/xt_tcpudp.ko + loading @0xffffffffa0016000: /home/user/linux/build/net/netfilter/xt_pkttype.ko + loading @0xffffffffa0002000: /home/user/linux/build/net/netfilter/xt_limit.ko + loading @0xffffffffa00ca000: /home/user/linux/build/net/packet/af_packet.ko + loading @0xffffffffa003c000: /home/user/linux/build/fs/fuse/fuse.ko + ... + loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko + +- å¯¹ä¸€äº›å°šæœªåŠ è½½çš„æ¨¡å—ä¸çš„函数函数设置æ–点,例如:: + + (gdb) b btrfs_init_sysfs + Function "btrfs_init_sysfs" not defined. + Make breakpoint pending on future shared library load? (y or [n]) y + Breakpoint 1 (btrfs_init_sysfs) pending. + +- 继ç»æ‰§è¡Œ:: + + (gdb) c + +- åŠ è½½æ¨¡å—并且能观察到æ£åœ¨åŠ 载的符å·ä»¥åŠæ–点命ä¸:: + + loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko + loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko + loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko + loading @0xffffffffa01b1000: /home/user/linux/build/fs/btrfs/btrfs.ko + + Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36 + 36 btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj); + +- æŸ¥çœ‹å†…æ ¸çš„æ—¥å¿—ç¼“å†²åŒº:: + + (gdb) lx-dmesg + [ 0.000000] Initializing cgroup subsys cpuset + [ 0.000000] Initializing cgroup subsys cpu + [ 0.000000] Linux version 3.8.0-rc4-dbg+ (... + [ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x314 + [ 0.000000] e820: BIOS-provided physical RAM map: + [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable + [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved + .... + +- 查看当å‰task struct结构体的å—段(仅x86å’Œarm64支æŒï¼‰:: + + (gdb) p $lx_current().pid + $1 = 4998 + (gdb) p $lx_current().comm + $2 = "modprobe\000\000\000\000\000\000\000" + +- 对当å‰æˆ–指定的CPU使用per-cpu函数:: + + (gdb) p $lx_per_cpu("runqueues").nr_running + $3 = 1 + (gdb) p $lx_per_cpu("runqueues", 2).nr_running + $4 = 0 + +- 使用container_of查看更多hrtimersä¿¡æ¯:: + + (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next + (gdb) p *$container_of($next, "struct hrtimer", "node") + $5 = { + node = { + node = { + __rb_parent_color = 18446612133355256072, + rb_right = 0x0 <irq_stack_union>, + rb_left = 0x0 <irq_stack_union> + }, + expires = { + tv64 = 1835268000000 + } + }, + _softexpires = { + tv64 = 1835268000000 + }, + function = 0xffffffff81078232 <tick_sched_timer>, + base = 0xffff88003fd0d6f0, + state = 1, + start_pid = 0, + start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>, + start_comm = "swapper/2\000\000\000\000\000\000" + } + + +命令和辅助调试功能列表 +---------------------- + +命令和辅助调试功能å¯èƒ½ä¼šéšç€æ—¶é—´çš„推移而改进,æ¤æ–‡æ˜¾ç¤ºçš„是åˆå§‹ç‰ˆæœ¬çš„部分示例:: + + (gdb) apropos lx + function lx_current -- Return current task + function lx_module -- Find module by name and return the module variable + function lx_per_cpu -- Return per-cpu variable + function lx_task_by_pid -- Find Linux task by PID and return the task_struct variable + function lx_thread_info -- Calculate Linux thread_info from task variable + lx-dmesg -- Print Linux kernel log buffer + lx-lsmod -- List currently loaded modules + lx-symbols -- (Re-)load symbols of Linux kernel and currently loaded modules + +å¯ä»¥é€šè¿‡â€œhelp <command-name>â€æˆ–“help function <function-name>â€å‘½ä»¤ +获å–指定命令或指定调试功能的更多详细信æ¯ã€‚ diff --git a/Documentation/translations/zh_CN/dev-tools/index.rst b/Documentation/translations/zh_CN/dev-tools/index.rst index 77a8c44cdf49..02577c379007 100644 --- a/Documentation/translations/zh_CN/dev-tools/index.rst +++ b/Documentation/translations/zh_CN/dev-tools/index.rst @@ -25,6 +25,7 @@ Documentation/translations/zh_CN/dev-tools/testing-overview.rst sparse gcov kasan + gdb-kernel-debugging Todolist: @@ -34,7 +35,6 @@ Todolist: - kmemleak - kcsan - kfence - - gdb-kernel-debugging - kgdb - kselftest - kunit/index diff --git a/Documentation/translations/zh_CN/devicetree/usage-model.rst b/Documentation/translations/zh_CN/devicetree/usage-model.rst index 318a3c6a0114..accdc33475a0 100644 --- a/Documentation/translations/zh_CN/devicetree/usage-model.rst +++ b/Documentation/translations/zh_CN/devicetree/usage-model.rst @@ -120,24 +120,24 @@ dt_compatåˆ—è¡¨ï¼ˆå¦‚æžœä½ å¥½å¥‡ï¼Œè¯¥åˆ—è¡¨å®šä¹‰åœ¨arch/arm/include/asm/mach/ 表示什么。在Documentation/devicetree/bindingsä¸æ·»åŠ 兼容å—符串的文档。 åŒæ ·åœ¨ARM上,对于æ¯ä¸ªmachine_descï¼Œå†…æ ¸ä¼šæŸ¥çœ‹æ˜¯å¦æœ‰ä»»ä½•dt_compatåˆ—è¡¨æ¡ -目出现在兼容属性ä¸ã€‚如果有,那么该机器_desc就是驱动该机器的候选者。在æœç´¢ +目出现在兼容属性ä¸ã€‚如果有,那么该machine_desc就是驱动该机器的候选者。在æœç´¢ 了整个machine_descs表之åŽï¼Œsetup_machine_fdt()æ ¹æ®æ¯ä¸ªmachine_desc 在兼容属性ä¸åŒ¹é…çš„æ¡ç›®ï¼Œè¿”回 “最兼容†的machine_descã€‚å¦‚æžœæ²¡æœ‰æ‰¾åˆ°åŒ¹é… çš„machine_desc,那么它将返回NULL。 这个方案背åŽçš„åŽŸå› æ˜¯è§‚å¯Ÿåˆ°ï¼Œåœ¨å¤§å¤šæ•°æƒ…å†µä¸‹ï¼Œå¦‚æžœå®ƒä»¬éƒ½ä½¿ç”¨ç›¸åŒçš„SoCæˆ–ç›¸åŒ -系列的SoC,一个机器_descå¯ä»¥æ”¯æŒå¤§é‡çš„电路æ¿ã€‚然而,ä¸å¯é¿å…地会有一些例 +系列的SoC,一个machine_descå¯ä»¥æ”¯æŒå¤§é‡çš„电路æ¿ã€‚然而,ä¸å¯é¿å…地会有一些例 外情况,å³ç‰¹å®šçš„æ¿å需è¦ç‰¹æ®Šçš„设置代ç ,这在一般情况下是没有用的。特殊情况 å¯ä»¥é€šè¿‡åœ¨é€šç”¨è®¾ç½®ä»£ç ä¸æ˜Žç¡®æ£€æŸ¥æœ‰é—®é¢˜çš„æ¿åæ¥å¤„ç†ï¼Œä½†å¦‚æžœè¶…è¿‡å‡ ä¸ªæƒ…å†µä¸‹ï¼Œ è¿™æ ·åšå¾ˆå¿«å°±ä¼šå˜å¾—很难看和/æˆ–æ— æ³•ç»´æŠ¤ã€‚ -相å,兼容列表å…许通用机器_desc通过在dt_compat列表ä¸æŒ‡å®šâ€œä¸å¤ªå…¼å®¹â€çš„值 +相å,兼容列表å…许通用machine_desc通过在dt_compat列表ä¸æŒ‡å®šâ€œä¸å¤ªå…¼å®¹â€çš„值 æ¥æ供对广泛的通用æ¿çš„支æŒã€‚在上é¢çš„例åä¸ï¼Œé€šç”¨æ¿æ”¯æŒå¯ä»¥å£°ç§°ä¸Žâ€œti,ompa3†或“ti,ompa3450â€å…¼å®¹ã€‚如果在最åˆçš„beagleboard上å‘现了一个bug,需è¦åœ¨ 早期å¯åŠ¨æ—¶ä½¿ç”¨ç‰¹æ®Šçš„å˜é€šä»£ç ,那么å¯ä»¥æ·»åŠ 一个新的machine_desc,实现å˜é€šï¼Œ 并且åªåœ¨â€œti,omap3-beagleboardâ€ä¸ŠåŒ¹é…。 -PowerPC使用了一个ç¨å¾®ä¸åŒçš„方案,它从æ¯ä¸ªæœºå™¨_descä¸è°ƒç”¨.probe()é’©å, +PowerPC使用了一个ç¨å¾®ä¸åŒçš„方案,它从æ¯ä¸ªmachine_descä¸è°ƒç”¨.probe()é’©å, 并使用第一个返回TRUEçš„é’©å。然而,这ç§æ–¹æ³•æ²¡æœ‰è€ƒè™‘到兼容列表的优先级,对于 新的架构支æŒå¯èƒ½åº”该é¿å…。 diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index 88d8df957a78..ac32d8e306ac 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -108,6 +108,7 @@ TODOList: :maxdepth: 2 core-api/index + locking/index accounting/index cpu-freq/index iio/index @@ -123,7 +124,6 @@ TODOList: TODOList: * driver-api/index -* locking/index * block/index * cdrom/index * ide/index diff --git a/Documentation/translations/zh_CN/locking/index.rst b/Documentation/translations/zh_CN/locking/index.rst new file mode 100644 index 000000000000..700df8a2bb70 --- /dev/null +++ b/Documentation/translations/zh_CN/locking/index.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/locking/index.rst + +:翻译: + + å”艺舟 Tang Yizhou <tangyeechou@gmail.com> + +== +é” +== + +.. toctree:: + :maxdepth: 1 + +TODOList: + + * locktypes + * lockdep-design + * lockstat + * locktorture + * mutex-design + * rt-mutex-design + * rt-mutex + * seqlock + * spinlocks + * ww-mutex-design + * preempt-locking + * pi-futex + * futex-requeue-pi + * hwspinlock + * percpu-rw-semaphore + * robust-futexes + * robust-futex-ABI + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/translations/zh_CN/locking/spinlocks.rst b/Documentation/translations/zh_CN/locking/spinlocks.rst new file mode 100644 index 000000000000..2017c01f0a4b --- /dev/null +++ b/Documentation/translations/zh_CN/locking/spinlocks.rst @@ -0,0 +1,149 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/locking/spinlocks.rst + +:翻译: + + å”艺舟 Tang Yizhou <tangyeechou@gmail.com> + +========== +åŠ é”çš„æ•™è® +========== + +æ•™è® 1ï¼šè‡ªæ—‹é” +============== + +åŠ é”最基本的原è¯æ˜¯è‡ªæ—‹é”(spinlock):: + + static DEFINE_SPINLOCK(xxx_lock); + + unsigned long flags; + + spin_lock_irqsave(&xxx_lock, flags); + ... 这里是临界区 .. + spin_unlock_irqrestore(&xxx_lock, flags); + +上述代ç 总是安全的。自旋é”将在 _本地_ ç¦ç”¨ä¸æ–,但它本身将ä¿è¯å…¨å±€é”定。所以它 +å°†ä¿è¯åœ¨è¯¥é”ä¿æŠ¤çš„区域内åªæœ‰ä¸€ä¸ªæŽ§åˆ¶çº¿ç¨‹ã€‚å³ä½¿åœ¨å•å¤„ç†å™¨ï¼ˆUP)下也能很好的工作, +所以代ç _ä¸_ 需è¦æ‹…心UP还是SMP的问题:自旋é”在两ç§æƒ…况下都能æ£å¸¸å·¥ä½œã€‚ + + 注æ„ï¼è‡ªæ—‹é”对内å˜çš„潜在影å“由下述文档进一æ¥æ述: + + Documentation/memory-barriers.txt + + (5) ACQUIRE operations. + + (6) RELEASE operations. + +上述代ç 通常éžå¸¸ç®€å•ï¼ˆå¯¹å¤§éƒ¨åˆ†æƒ…å†µï¼Œä½ é€šå¸¸éœ€è¦å¹¶ä¸”åªå¸Œæœ›æœ‰ä¸€ä¸ªè‡ªæ—‹é”——使用多个 +自旋é”会使事情å˜å¾—æ›´å¤æ‚ï¼Œç”šè‡³æ›´æ…¢ï¼Œè€Œä¸”é€šå¸¸ä»…ä»…åœ¨ä½ **ç†è§£çš„** åºåˆ—有被拆分的 +需求时æ‰å€¼å¾—这么åšï¼šå¦‚æžœä½ ä¸ç¡®å®šçš„è¯ï¼Œè¯·ä¸æƒœä¸€åˆ‡ä»£ä»·é¿å…è¿™æ ·åšï¼‰ã€‚ + +这是关于自旋é”的唯一真æ£å›°éš¾çš„éƒ¨åˆ†ï¼šä¸€æ—¦ä½ å¼€å§‹ä½¿ç”¨è‡ªæ—‹é”ï¼Œå®ƒä»¬å¾€å¾€ä¼šæ‰©å±•åˆ°ä½ ä»¥å‰ +å¯èƒ½æ²¡æœ‰æ³¨æ„åˆ°çš„é¢†åŸŸï¼Œå› ä¸ºä½ å¿…é¡»ç¡®ä¿è‡ªæ—‹é”æ£ç¡®åœ°ä¿æŠ¤å…±äº«æ•°æ®ç»“æž„ **æ¯ä¸€å¤„** 被 +使用的地方。自旋é”æ˜¯æœ€å®¹æ˜“è¢«æ·»åŠ åˆ°å®Œå…¨ç‹¬ç«‹äºŽå…¶å®ƒä»£ç 的地方(例如,没有人访问的 +内部驱动数æ®ç»“构)的。 + + 注æ„ï¼ä»…å½“ä½ åœ¨è·¨CPUæ ¸è®¿é—®æ—¶ä½¿ç”¨ **åŒä¸€æŠŠ** 自旋é”,对它的使用æ‰æ˜¯å®‰å…¨çš„。 + è¿™æ„味ç€æ‰€æœ‰è®¿é—®å…±äº«å˜é‡çš„代ç 必须对它们想使用的自旋é”è¾¾æˆä¸€è‡´ã€‚ + +---- + +æ•™è® 2:读-å†™è‡ªæ—‹é” +=================== + +å¦‚æžœä½ çš„æ•°æ®è®¿é—®æœ‰ä¸€ä¸ªéžå¸¸è‡ªç„¶çš„模å¼ï¼Œå€¾å‘于从共享å˜é‡ä¸è¯»å–æ•°æ®ï¼Œè¯»-å†™è‡ªæ—‹é” +(rw_lock)有时是有用的。它们å…许多个读者åŒæ—¶å‡ºçŽ°åœ¨åŒä¸€ä¸ªä¸´ç•ŒåŒºï¼Œä½†æ˜¯å¦‚果有人想 +改å˜å˜é‡ï¼Œå®ƒå¿…须获得一个独å 的写é”。 + + 注æ„ï¼è¯»-写自旋é”比原始自旋é”需è¦æ›´å¤šçš„原å内å˜æ“作。除éžè¯»è€…的临界区很长, + å¦åˆ™ä½ 最好åªä½¿ç”¨åŽŸå§‹è‡ªæ—‹é”。 + +例程看起æ¥å’Œä¸Šé¢ä¸€æ ·:: + + rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock); + + unsigned long flags; + + read_lock_irqsave(&xxx_lock, flags); + .. 仅读å–ä¿¡æ¯çš„临界区 ... + read_unlock_irqrestore(&xxx_lock, flags); + + write_lock_irqsave(&xxx_lock, flags); + .. 读å–和独å å†™ä¿¡æ¯ ... + write_unlock_irqrestore(&xxx_lock, flags); + +上é¢è¿™ç§é”对于å¤æ‚çš„æ•°æ®ç»“构如链表å¯èƒ½ä¼šæœ‰ç”¨ï¼Œç‰¹åˆ«æ˜¯åœ¨ä¸æ”¹å˜é“¾è¡¨çš„情况下æœç´¢å…¶ä¸ +çš„æ¡ç›®ã€‚读é”å…许许多并å‘的读者。任何希望 **修改** 链表的代ç 将必须先获å–写é”。 + + 注æ„ï¼RCUé”更适åˆé历链表,但需è¦ä»”细注æ„设计细节(è§Documentation/RCU/listRCU.rst)。 + +å¦å¤–ï¼Œä½ ä¸èƒ½æŠŠè¯»é”“å‡çº§â€ä¸ºå†™é”ï¼Œæ‰€ä»¥å¦‚æžœä½ åœ¨ _任何_ 时候需è¦åšä»»ä½•ä¿®æ”¹ +(å³ä½¿ä½ ä¸æ˜¯æ¯æ¬¡éƒ½è¿™æ ·åšï¼‰ï¼Œä½ 必须在一开始就获得写é”。 + + 注æ„ï¼æˆ‘们æ£åœ¨åŠªåŠ›æ¶ˆé™¤å¤§å¤šæ•°æƒ…况下的读-写自旋é”的使用,所以请ä¸è¦åœ¨æ²¡æœ‰è¾¾æˆ + å…±è¯†çš„æƒ…å†µä¸‹å¢žåŠ ä¸€ä¸ªæ–°çš„ï¼ˆç›¸å,请å‚阅Documentation/RCU/rcu.rst以获得完整 + ä¿¡æ¯ï¼‰ã€‚ + +---- + +æ•™è® 3:é‡æ–°å®¡è§†è‡ªæ—‹é” +====================== + +上述的自旋é”原è¯ç»ä¸æ˜¯å”¯ä¸€çš„。它们是最安全的,在所有情况下都能æ£å¸¸å·¥ä½œï¼Œä½†éƒ¨åˆ† +**å› ä¸º** 它们是安全的,它们也是相当慢的。它们比原本需è¦çš„æ›´æ…¢ï¼Œå› ä¸ºå®ƒä»¬å¿…é¡»è¦ +ç¦ç”¨ä¸æ–(在X86上åªæ˜¯ä¸€æ¡æŒ‡ä»¤ï¼Œä½†å´æ˜¯ä¸€æ¡æ˜‚贵的指令——而在其他体系结构上,情况 +å¯èƒ½æ›´ç³Ÿï¼‰ã€‚ + +å¦‚æžœä½ æœ‰å¿…é¡»ä¿æŠ¤è·¨CPU访问的数æ®ç»“æž„ä¸”ä½ æƒ³ä½¿ç”¨è‡ªæ—‹é”çš„åœºæ™¯ï¼Œä½ æœ‰å¯èƒ½ä½¿ç”¨ä»£ä»·å°çš„ +自旋é”ç‰ˆæœ¬ã€‚å½“ä¸”ä»…å½“ä½ çŸ¥é“æŸè‡ªæ—‹é”永远ä¸ä¼šåœ¨ä¸æ–处ç†ç¨‹åºä¸ä½¿ç”¨ï¼Œä½ å¯ä»¥ä½¿ç”¨éžä¸æ– +的版本:: + + spin_lock(&lock); + ... + spin_unlock(&lock); + +(当然,也å¯ä»¥ä½¿ç”¨ç›¸åº”的读-写é”版本)。这ç§è‡ªæ—‹é”å°†åŒæ ·å¯ä»¥ä¿è¯ç‹¬å 访问,而且 +é€Ÿåº¦ä¼šå¿«å¾ˆå¤šã€‚å¦‚æžœä½ çŸ¥é“有关的数æ®åªåœ¨â€œè¿›ç¨‹ä¸Šä¸‹æ–‡â€ä¸è¢«å˜å–,å³ï¼Œä¸æ¶‰åŠä¸æ–, +è¿™ç§è‡ªæ—‹é”就有用了。 + +当这些版本的自旋é”涉åŠä¸æ–æ—¶ï¼Œä½ ä¸èƒ½ä½¿ç”¨çš„åŽŸå› æ˜¯ä¼šé™·å…¥æ»é”:: + + spin_lock(&lock); + ... + <- ä¸æ–æ¥ä¸´ï¼š + spin_lock(&lock); + +一个ä¸æ–试图对一个已ç»é”定的å˜é‡ä¸Šé”。如果ä¸æ–å‘生在å¦ä¸€ä¸ªCPU上,ä¸ä¼šæœ‰é—®é¢˜ï¼› +但如果ä¸æ–å‘生在已ç»æŒæœ‰è‡ªæ—‹é”çš„åŒä¸€ä¸ªCPU上,将 _会_ æœ‰é—®é¢˜ï¼Œå› ä¸ºè¯¥é”显然永远 +ä¸ä¼šè¢«é‡Šæ”¾ï¼ˆå› 为ä¸æ–æ£åœ¨ç‰å¾…该é”,而é”çš„æŒæœ‰è€…被ä¸æ–打æ–ï¼Œå¹¶ä¸”æ— æ³•ç»§ç»æ‰§è¡Œï¼Œ +直到ä¸æ–处ç†ç»“æŸï¼‰ã€‚ + +(这也是自旋é”çš„ä¸æ–版本åªéœ€è¦ç¦ç”¨ _本地_ ä¸æ–çš„åŽŸå› â€”â€”åœ¨å‘生于其它CPUçš„ä¸æ–ä¸ +使用åŒä¸€æŠŠè‡ªæ—‹é”æ˜¯æ²¡é—®é¢˜çš„ï¼Œå› ä¸ºå‘生于其它CPUçš„ä¸æ–ä¸ä¼šæ‰“æ–å·²ç»æŒé”çš„CPU,所以 +é”çš„æŒæœ‰è€…å¯ä»¥ç»§ç»æ‰§è¡Œå¹¶æœ€ç»ˆé‡Šæ”¾é”)。 + + Linus + +---- + +å‚è€ƒä¿¡æ¯ +======== + +对于动æ€åˆå§‹åŒ–,使用spin_lock_init()或rwlock_init()是åˆé€‚çš„:: + + spinlock_t xxx_lock; + rwlock_t xxx_rw_lock; + + static int __init xxx_init(void) + { + spin_lock_init(&xxx_lock); + rwlock_init(&xxx_rw_lock); + ... + } + + module_init(xxx_init); + +对于é™æ€åˆå§‹åŒ–,使用DEFINE_SPINLOCK() / DEFINE_RWLOCK()或 +__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED()是åˆé€‚的。 diff --git a/Documentation/translations/zh_CN/process/howto.rst b/Documentation/translations/zh_CN/process/howto.rst index 2903d7161bc8..1334cdb32a3c 100644 --- a/Documentation/translations/zh_CN/process/howto.rst +++ b/Documentation/translations/zh_CN/process/howto.rst @@ -252,7 +252,7 @@ Linux-next 集æˆæµ‹è¯•æ ‘ 在将åç³»ç»Ÿæ ‘çš„æ›´æ–°åˆå¹¶åˆ°ä¸»çº¿æ ‘之å‰ï¼Œéœ€è¦å¯¹å®ƒä»¬è¿›è¡Œé›†æˆæµ‹è¯•ã€‚为æ¤ï¼Œå˜åœ¨ä¸€ä¸ª 特殊的测试å˜å‚¨åº“,其ä¸å‡ 乎æ¯å¤©éƒ½ä¼šæå–所有åç³»ç»Ÿæ ‘ï¼š - https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git + https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git 通过这ç§æ–¹å¼ï¼ŒLinux-next 对下一个åˆå¹¶é˜¶æ®µå°†è¿›å…¥ä¸»çº¿å†…æ ¸çš„å†…å®¹ç»™å‡ºäº†ä¸€ä¸ªæ¦‚è¦ å±•æœ›ã€‚éžå¸¸æ¬¢å†’险的测试者è¿è¡Œæµ‹è¯•Linux-next。 diff --git a/Documentation/translations/zh_CN/scheduler/index.rst b/Documentation/translations/zh_CN/scheduler/index.rst index 12bf3bd02ccf..a8eaa7325f54 100644 --- a/Documentation/translations/zh_CN/scheduler/index.rst +++ b/Documentation/translations/zh_CN/scheduler/index.rst @@ -25,8 +25,10 @@ Linux调度器 sched-domains sched-capacity sched-energy + schedutil sched-nice-design sched-stats + sched-debug TODOList: diff --git a/Documentation/translations/zh_CN/scheduler/sched-debug.rst b/Documentation/translations/zh_CN/scheduler/sched-debug.rst new file mode 100644 index 000000000000..5e17740c2bf3 --- /dev/null +++ b/Documentation/translations/zh_CN/scheduler/sched-debug.rst @@ -0,0 +1,51 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scheduler/sched-debug.rst + +:翻译: + + å”艺舟 Tang Yizhou <tangyeechou@gmail.com> + +============= +调度器debugfs +============= + +用é…置项CONFIG_SCHED_DEBUG=yå¯åŠ¨å†…æ ¸åŽï¼Œå°†å¯ä»¥è®¿é—®/sys/kernel/debug/sched +下的调度器专用调试文件。其ä¸ä¸€äº›æ–‡ä»¶æ述如下。 + +numa_balancing +============== + +`numa_balancing` 目录用æ¥å˜æ”¾æŽ§åˆ¶éžç»Ÿä¸€å†…å˜è®¿é—®ï¼ˆNUMA)平衡特性的相关文件。 +如果该特性导致系统负载太高,那么å¯ä»¥é€šè¿‡ `scan_period_min_ms, scan_delay_ms, +scan_period_max_ms, scan_size_mb` 文件控制NUMAç¼ºé¡µçš„å†…æ ¸é‡‡æ ·é€ŸçŽ‡ã€‚ + + +scan_period_min_ms, scan_delay_ms, scan_period_max_ms, scan_size_mb +------------------------------------------------------------------- + +自动NUMA平衡会扫æ任务地å€ç©ºé—´ï¼Œæ£€æµ‹é¡µé¢æ˜¯å¦è¢«æ£ç¡®æ”¾ç½®ï¼Œæˆ–者数æ®æ˜¯å¦åº”该被 +è¿ç§»åˆ°ä»»åŠ¡æ£åœ¨è¿è¡Œçš„本地内å˜ç»“点,æ¤æ—¶éœ€è§£æ˜ 射页é¢ã€‚æ¯ä¸ªâ€œæ‰«æ延迟â€ï¼ˆscan delay) +时间之åŽï¼Œä»»åŠ¡æ‰«æ其地å€ç©ºé—´ä¸ä¸‹ä¸€æ‰¹â€œæ‰«æ大å°â€ï¼ˆscan size)个页é¢ã€‚若抵达 +内å˜åœ°å€ç©ºé—´æœ«å°¾ï¼Œæ‰«æ器将从头开始é‡æ–°æ‰«æ。 + +结åˆæ¥çœ‹ï¼Œâ€œæ‰«æ延迟â€å’Œâ€œæ‰«æ大å°â€å†³å®šæ‰«æ速率。当“扫æ延迟â€å‡å°æ—¶ï¼Œæ‰«æ速率 +å¢žåŠ ã€‚â€œæ‰«æ延迟â€å’Œæ¯ä¸ªä»»åŠ¡çš„扫æ速率都是自适应的,且ä¾èµ–历å²è¡Œä¸ºã€‚如果页é¢è¢« +æ£ç¡®æ”¾ç½®ï¼Œé‚£ä¹ˆæ‰«æå»¶è¿Ÿå°±ä¼šå¢žåŠ ï¼›å¦åˆ™æ‰«æ延迟就会å‡å°‘。“扫æ大å°â€ä¸æ˜¯è‡ªé€‚应的, +“扫æ大å°â€è¶Šå¤§ï¼Œæ‰«æ速率越高。 + +更高的扫æé€ŸçŽ‡ä¼šäº§ç”Ÿæ›´é«˜çš„ç³»ç»Ÿå¼€é”€ï¼Œå› ä¸ºå¿…é¡»æ•èŽ·ç¼ºé¡µå¼‚常,并且潜在地必须è¿ç§» +æ•°æ®ã€‚然而,当扫æ速率越高,若工作负载模å¼å‘生å˜åŒ–,任务的内å˜å°†è¶Šå¿«åœ°è¿ç§»åˆ° +本地结点,由于远程内å˜è®¿é—®è€Œäº§ç”Ÿçš„性能影å“å°†é™åˆ°æœ€ä½Žã€‚下é¢è¿™äº›æ–‡ä»¶æŽ§åˆ¶æ‰«æ延迟 +的阈值和被扫æ的页é¢æ•°é‡ã€‚ + +``scan_period_min_ms`` 是扫æ一个任务虚拟内å˜çš„最å°æ—¶é—´ï¼Œå•ä½æ˜¯æ¯«ç§’。它有效地 +控制了æ¯ä¸ªä»»åŠ¡çš„最大扫æ速率。 + +``scan_delay_ms`` 是一个任务åˆå§‹åŒ–创建(fork)时,第一次使用的“扫æ延迟â€ã€‚ + +``scan_period_max_ms`` 是扫æ一个任务虚拟内å˜çš„最大时间,å•ä½æ˜¯æ¯«ç§’。它有效地 +控制了æ¯ä¸ªä»»åŠ¡çš„最å°æ‰«æ速率。 + +``scan_size_mb`` 是一次特定的扫æä¸ï¼Œè¦æ‰«æ多少兆å—节(MB)对应的页é¢æ•°ã€‚ diff --git a/Documentation/translations/zh_CN/scheduler/schedutil.rst b/Documentation/translations/zh_CN/scheduler/schedutil.rst new file mode 100644 index 000000000000..d1ea68007520 --- /dev/null +++ b/Documentation/translations/zh_CN/scheduler/schedutil.rst @@ -0,0 +1,165 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scheduler/schedutil.rst + +:翻译: + + å”艺舟 Tang Yizhou <tangyeechou@gmail.com> + +========= +Schedutil +========= + +.. note:: + + 本文所有内容都å‡è®¾é¢‘率和工作算力之间å˜åœ¨çº¿æ€§å…³ç³»ã€‚我们知é“这是有瑕疵的, + 但这是最å¯è¡Œçš„近似处ç†ã€‚ + +PELT(实体负载跟踪,Per Entity Load Tracking) +============================================== + +通过PELT,我们跟踪了å„ç§è°ƒåº¦å™¨å®žä½“çš„ä¸€äº›æŒ‡æ ‡ï¼Œä»Žå•ä¸ªä»»åŠ¡åˆ°ä»»åŠ¡ç»„分片到CPU +è¿è¡Œé˜Ÿåˆ—ã€‚æˆ‘ä»¬ä½¿ç”¨æŒ‡æ•°åŠ æƒç§»åŠ¨å¹³å‡æ•°ï¼ˆExponentially Weighted Moving Average, +EWMA)作为其基础,æ¯ä¸ªå‘¨æœŸï¼ˆ1024us)都会衰å‡ï¼Œè¡°å‡é€ŸçŽ‡æ»¡è¶³y^32 = 0.5。 +也就是说,最近的32ms贡献负载的一åŠï¼Œè€ŒåŽ†å²ä¸Šçš„其它时间则贡献å¦ä¸€åŠã€‚ + +具体而言: + + ewma_sum(u) := u_0 + u_1*y + u_2*y^2 + ... + + ewma(u) = ewma_sum(u) / ewma_sum(1) + +ç”±äºŽè¿™æœ¬è´¨ä¸Šæ˜¯ä¸€ä¸ªæ— é™å‡ ä½•çº§æ•°çš„ç´¯åŠ ï¼Œç»“æžœæ˜¯å¯ç»„åˆçš„,å³ewma(A) + ewma(B) = ewma(A+B)。 +è¿™ä¸ªå±žæ€§æ˜¯å…³é”®ï¼Œå› ä¸ºå®ƒæ供了在任务è¿ç§»æ—¶é‡æ–°ç»„åˆå¹³å‡æ•°çš„能力。 + +请注æ„,阻塞æ€çš„任务ä»ç„¶å¯¹ç´¯åŠ 值(任务组分片和CPUè¿è¡Œé˜Ÿåˆ—)有贡献,这åæ˜ äº† +它们在æ¢å¤è¿è¡ŒåŽçš„预期贡献。 + +利用这一点,我们跟踪2ä¸ªå…³é”®æŒ‡æ ‡ï¼šâ€œè¿è¡Œâ€å’Œâ€œå¯è¿è¡Œâ€ã€‚“è¿è¡Œâ€åæ˜ äº†ä¸€ä¸ªè°ƒåº¦å®žä½“ +在CPU上花费的时间,而“å¯è¿è¡Œâ€åæ˜ äº†ä¸€ä¸ªè°ƒåº¦å®žä½“åœ¨è¿è¡Œé˜Ÿåˆ—ä¸èŠ±è´¹çš„时间。当åªæœ‰ +ä¸€ä¸ªä»»åŠ¡æ—¶ï¼Œè¿™ä¸¤ä¸ªæŒ‡æ ‡æ˜¯ç›¸åŒçš„,但一旦出现对CPU的争用,“è¿è¡Œâ€å°†å‡å°‘以åæ˜ æ¯ä¸ª +任务在CPU上花费的时间,而“å¯è¿è¡Œâ€å°†å¢žåŠ 以åæ˜ äº‰ç”¨çš„æ¿€çƒˆç¨‹åº¦ã€‚ + +更多细节è§ï¼škernel/sched/pelt.c + + +频率 / CPUä¸å˜æ€§ +================ + +å› ä¸ºCPU频率在1GHz时利用率为50%å’ŒCPU频率在2GHz时利用率为50%是ä¸ä¸€æ ·çš„,åŒæ · +在å°æ ¸ä¸Šè¿è¡Œæ—¶åˆ©ç”¨çŽ‡ä¸º50%å’Œåœ¨å¤§æ ¸ä¸Šè¿è¡Œæ—¶åˆ©ç”¨çŽ‡ä¸º50%是ä¸ä¸€æ ·çš„,我们å…许架构 +以两个比率æ¥ä¼¸ç¼©æ—¶é—´å·®ï¼Œå…¶ä¸ä¸€ä¸ªæ˜¯åŠ¨æ€ç”µåŽ‹é¢‘率å‡é™ï¼ˆDynamic Voltage and +Frequency Scaling,DVFS)比率,å¦ä¸€ä¸ªæ˜¯å¾®æž¶æž„比率。 + +对于简å•çš„DVFS架构(软件有完全控制能力),我们å¯ä»¥å¾ˆå®¹æ˜“地计算该比率为:: + + f_cur + r_dvfs := ----- + f_max + +对于由硬件控制DVFS的更多动æ€ç³»ç»Ÿï¼Œæˆ‘们使用硬件计数器(Intel APERF/MPERF, +ARMv8.4-AMU)æ¥è®¡ç®—这一比率。具体到Intel,我们使用:: + + APERF + f_cur := ----- * P0 + MPERF + + 4C-turbo; 如果å¯ç”¨å¹¶ä¸”使能了turbo + f_max := { 1C-turbo; 如果使能了turbo + P0; 其它情况 + + f_cur + r_dvfs := min( 1, ----- ) + f_max + +我们选择4C turbo而ä¸æ˜¯1C turbo,以使其更æŒä¹…性略微更强。 + +r_cpu被定义为当å‰CPU的最高性能水平与系统ä¸ä»»ä½•å…¶å®ƒCPU的最高性能水平的比率。 + + r_tot = r_dvfs * r_cpu + +其结果是,上述“è¿è¡Œâ€å’Œâ€œå¯è¿è¡Œâ€çš„æŒ‡æ ‡å˜æˆDVFSæ— å…³å’ŒCPUåž‹å·æ— 关了。也就是说, +我们å¯ä»¥åœ¨CPU之间转移和比较它们。 + +更多细节è§: + + - kernel/sched/pelt.h:update_rq_clock_pelt() + - arch/x86/kernel/smpboot.c:"APERF/MPERF frequency ratio computation." + - Documentation/translations/zh_CN/scheduler/sched-capacity.rst:"1. CPU Capacity + 2. Task utilization" + + +UTIL_EST / UTIL_EST_FASTUP +========================== + +由于周期性任务的平å‡æ•°åœ¨ç¡çœ 时会衰å‡ï¼Œè€Œåœ¨è¿è¡Œæ—¶å…¶é¢„期利用率会和ç¡çœ å‰ç›¸åŒï¼Œ +å› æ¤å®ƒä»¬åœ¨å†æ¬¡è¿è¡ŒåŽä¼šé¢ä¸´ï¼ˆDVFS)的上涨。 + +为了缓解这个问题,(一个默认使能的编译选项)UTIL_ESTé©±åŠ¨ä¸€ä¸ªæ— é™è„‰å†²å“应 +(Infinite Impulse Response,IIR)的EWMA,“è¿è¡Œâ€å€¼åœ¨å‡ºé˜Ÿæ—¶æ˜¯æœ€é«˜çš„。 +å¦ä¸€ä¸ªé»˜è®¤ä½¿èƒ½çš„编译选项UTIL_EST_FASTUP修改了IIR滤波器,使其å…许立å³å¢žåŠ , +仅在利用率下é™æ—¶è¡°å‡ã€‚ + +进一æ¥ï¼Œè¿è¡Œé˜Ÿåˆ—的(å¯è¿è¡Œä»»åŠ¡çš„)利用率之和由下å¼è®¡ç®—: + + util_est := \Sum_t max( t_running, t_util_est_ewma ) + +更多细节è§: kernel/sched/fair.c:util_est_dequeue() + + +UCLAMP +====== + +å¯ä»¥åœ¨æ¯ä¸ªCFS或RT任务上设置有效的u_minå’Œu_max clamp值(译注:clampå¯ä»¥ç†è§£ +为类似滤波器的能力,它定义了有效å–值范围的最大值和最å°å€¼ï¼‰ï¼›è¿è¡Œé˜Ÿåˆ—为所有æ£åœ¨ +è¿è¡Œçš„任务ä¿æŒè¿™äº›clamp的最大èšåˆå€¼ã€‚ + +更多细节è§: include/uapi/linux/sched/types.h + + +Schedutil / DVFS +================ + +æ¯å½“调度器的负载跟踪被更新时(任务唤醒ã€ä»»åŠ¡è¿ç§»ã€æ—¶é—´æµé€ï¼‰ï¼Œæˆ‘们都会调用 +schedutilæ¥æ›´æ–°ç¡¬ä»¶DVFS状æ€ã€‚ + +其基础是CPUè¿è¡Œé˜Ÿåˆ—的“è¿è¡Œâ€æŒ‡æ ‡ï¼Œæ ¹æ®ä¸Šé¢çš„内容,它是CPU的频率ä¸å˜çš„利用率 +估计值。由æ¤æˆ‘们计算出一个期望的频率,如下:: + + max( running, util_est ); 如果使能UTIL_EST + u_cfs := { running; 其它情况 + + clamp( u_cfs + u_rt, u_min, u_max ); 如果使能UCLAMP_TASK + u_clamp := { u_cfs + u_rt; 其它情况 + + u := u_clamp + u_irq + u_dl; [估计值。更多细节è§æºä»£ç ] + + f_des := min( f_max, 1.25 u * f_max ) + +关于IO-wait的说明:当å‘ç”Ÿæ›´æ–°æ˜¯å› ä¸ºä»»åŠ¡ä»ŽIO完æˆä¸å”¤é†’时,我们æå‡ä¸Šé¢çš„“uâ€ã€‚ + +然åŽï¼Œè¿™ä¸ªé¢‘率被用æ¥é€‰æ‹©ä¸€ä¸ªP-state或OPP,或者直接混入一个å‘给硬件的CPPCå¼ +请求。 + +关于截æ¢æœŸé™è°ƒåº¦å™¨çš„说明: 截æ¢æœŸé™ä»»åŠ¡ï¼ˆå¶å‘任务模型)使我们能够计算出满足 +工作负è·æ‰€éœ€çš„硬f_min值。 + +å› ä¸ºè¿™äº›å›žè°ƒå‡½æ•°æ˜¯ç›´æŽ¥æ¥è‡ªè°ƒåº¦å™¨çš„,所以DVFS的硬件交互应该是“快速â€å’Œéžé˜»å¡žçš„。 +在硬件交互缓慢和昂贵的时候,schedutil支æŒDVFS请求é™é€Ÿï¼Œä¸è¿‡ä¼šé™ä½Žæ•ˆçŽ‡ã€‚ + +更多信æ¯è§: kernel/sched/cpufreq_schedutil.c + + +æ³¨æ„ +==== + + - 在低负载场景下,DVFS是最相关的,“è¿è¡Œâ€çš„值将密切åæ˜ åˆ©ç”¨çŽ‡ã€‚ + + - 在负载饱和的场景下,任务è¿ç§»ä¼šå¯¼è‡´ä¸€äº›çž¬æ—¶æ€§çš„使用率下é™ã€‚å‡è®¾æˆ‘们有一个 + CPU,有4个任务å 用导致其饱和,接下æ¥æˆ‘们将一个任务è¿ç§»åˆ°å¦ä¸€ä¸ªç©ºé—²CPU上, + 旧的CPU的“è¿è¡Œâ€å€¼å°†ä¸º0.75,而新的CPU将获得0.25。这是ä¸å¯é¿å…的,而且éšç€ + 时间æµé€å°†è‡ªåŠ¨ä¿®æ£ã€‚å¦æ³¨ï¼Œç”±äºŽæ²¡æœ‰ç©ºé—²æ—¶é—´ï¼Œæˆ‘们还能ä¿è¯f_max值å—? + + - 上述大部分内容是关于é¿å…DVFS下滑,以åŠç‹¬ç«‹çš„DVFS域å‘生负载è¿ç§»æ—¶ä¸å¾—ä¸ + é‡æ–°å¦ä¹ /æå‡é¢‘率。 + diff --git a/Documentation/translations/zh_CN/vm/damon/design.rst b/Documentation/translations/zh_CN/vm/damon/design.rst index 05f66c02740a..46128b77c2b3 100644 --- a/Documentation/translations/zh_CN/vm/damon/design.rst +++ b/Documentation/translations/zh_CN/vm/damon/design.rst @@ -77,7 +77,7 @@ DAMONç›®å‰ä¸ºç‰©ç†å’Œè™šæ‹Ÿåœ°å€ç©ºé—´æ供了基元的实现。下é¢ä¸¤ä¸ª ======================== 下é¢å››ä¸ªéƒ¨åˆ†åˆ†åˆ«æ述了DAMONçš„æ ¸å¿ƒæœºåˆ¶å’Œäº”ä¸ªç›‘æµ‹å±žæ€§ï¼Œå³ ``é‡‡æ ·é—´éš”`` 〠``èšé›†é—´éš”`` 〠-``区域更新间隔`` 〠``最å°åŒºåŸŸæ•°`` å’Œ ``最大区域数`` 。 +``æ›´æ–°é—´éš”`` 〠``最å°åŒºåŸŸæ•°`` å’Œ ``最大区域数`` 。 访问频率监测 @@ -135,5 +135,6 @@ DAMON的输出显示了在给定的时间内哪些页é¢çš„访问频率是多少 ç›‘æµ‹ç›®æ ‡åœ°å€èŒƒå›´å¯ä»¥åŠ¨æ€æ”¹å˜ã€‚例如,虚拟内å˜å¯ä»¥åŠ¨æ€åœ°è¢«æ˜ å°„å’Œè§£æ˜ å°„ã€‚ç‰©ç†å†…å˜å¯ä»¥è¢« çƒæ’拔。 -由于在æŸäº›æƒ…况下å˜åŒ–å¯èƒ½ç›¸å½“频ç¹ï¼ŒDAMON检查动æ€å†…å˜æ˜ å°„çš„å˜åŒ–,并仅在用户指定的时间 -间隔( ``区域更新间隔`` ï¼‰å†…å°†å…¶åº”ç”¨äºŽæŠ½è±¡çš„ç›®æ ‡åŒºåŸŸã€‚ +由于在æŸäº›æƒ…况下å˜åŒ–å¯èƒ½ç›¸å½“频ç¹ï¼ŒDAMONå…许监控æ“作检查动æ€å˜åŒ–,包括内å˜æ˜ å°„å˜åŒ–, +并仅在用户指定的时间间隔( ``æ›´æ–°é—´éš”`` )ä¸çš„æ¯ä¸ªæ—¶é—´æ®µï¼Œå°†å…¶åº”用于监控æ“作相关的 +æ•°æ®ç»“æž„ï¼Œå¦‚æŠ½è±¡çš„ç›‘æŽ§ç›®æ ‡å†…å˜åŒºã€‚
\ No newline at end of file diff --git a/Documentation/translations/zh_CN/vm/frontswap.rst b/Documentation/translations/zh_CN/vm/frontswap.rst new file mode 100644 index 000000000000..3eb07870e2ef --- /dev/null +++ b/Documentation/translations/zh_CN/vm/frontswap.rst @@ -0,0 +1,196 @@ +:Original: Documentation/vm/_free_page_reporting.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + +========= +Frontswap +========= + +Frontswap为交æ¢é¡µæ供了一个 “transcendent memory†的接å£ã€‚在一些环境ä¸ï¼Œç”± +于交æ¢é¡µè¢«ä¿å˜åœ¨RAM(或类似RAM的设备)ä¸ï¼Œè€Œä¸æ˜¯äº¤æ¢ç£ç›˜ï¼Œå› æ¤å¯ä»¥èŽ·å¾—巨大的性能 +节çœï¼ˆæ高)。 + +.. _Transcendent memory in a nutshell: https://lwn.net/Articles/454795/ + +Frontswap之所以这么命åï¼Œæ˜¯å› ä¸ºå®ƒå¯ä»¥è¢«è®¤ä¸ºæ˜¯ä¸Žswap设备的“backâ€å˜å‚¨ç›¸åã€‚å˜ +储器被认为是一个åŒæ¥å¹¶å‘安全的é¢å‘页é¢çš„“伪RAM设备â€ï¼Œç¬¦åˆtranscendent memory +(如Xen的“tmemâ€ï¼Œæˆ–å†…æ ¸å†…åŽ‹ç¼©å†…å˜ï¼Œåˆç§°â€œzcacheâ€ï¼Œæˆ–未æ¥çš„类似RAMçš„è®¾å¤‡ï¼‰çš„è¦ +求;这个伪RAM设备ä¸èƒ½è¢«å†…æ ¸ç›´æŽ¥è®¿é—®æˆ–å¯»å€ï¼Œå…¶å¤§å°æœªçŸ¥ä¸”å¯èƒ½éšæ—¶é—´å˜åŒ–。驱动程åºé€šè¿‡ +调用frontswap_register_ops将自己与frontswap链接起æ¥ï¼Œä»¥é€‚当地设置frontswap_ops +的功能,它æ供的功能必须符åˆæŸäº›ç–略,如下所示: + +一个 “init†将设备准备好接收与指定的交æ¢è®¾å¤‡ç¼–å·ï¼ˆåˆç§°â€œç±»åž‹â€ï¼‰ç›¸å…³çš„frontswap +交æ¢é¡µã€‚一个 “store†将把该页å¤åˆ¶åˆ°transcendent memory,并与该页的类型和å移 +é‡ç›¸å…³è”。一个 “load†将把该页,如果找到的è¯ï¼Œä»Žtranscendent memoryå¤åˆ¶åˆ°å†…æ ¸ +内å˜ï¼Œä½†ä¸ä¼šä»Žtranscendent memoryä¸åˆ 除该页。一个 “invalidate_page†将从 +transcendent memoryä¸åˆ 除该页,一个 “invalidate_areaâ€ å°†åˆ é™¤æ‰€æœ‰ä¸Žäº¤æ¢ç±»åž‹ +相关的页(例如,åƒswapoff)并通知 “device†拒ç»è¿›ä¸€æ¥å˜å‚¨è¯¥äº¤æ¢ç±»åž‹ã€‚ + +一旦一个页é¢è¢«æˆåŠŸå˜å‚¨ï¼Œåœ¨è¯¥é¡µé¢ä¸Šçš„匹é…åŠ è½½é€šå¸¸ä¼šæˆåŠŸã€‚å› æ¤ï¼Œå½“å†…æ ¸å‘现自己处于需 +è¦äº¤æ¢é¡µé¢çš„情况时,它首先å°è¯•ä½¿ç”¨frontswap。如果å˜å‚¨çš„结果是æˆåŠŸçš„,那么数æ®å°±å·² +ç»æˆåŠŸçš„ä¿å˜åˆ°äº†transcendent memoryä¸ï¼Œå¹¶ä¸”é¿å…了ç£ç›˜å†™å…¥ï¼Œå¦‚æžœåŽæ¥å†è¯»å›žæ•°æ®ï¼Œ +也é¿å…了ç£ç›˜è¯»å–。如果å˜å‚¨è¿”回失败,transcendent memoryå·²ç»æ‹’ç»äº†è¯¥æ•°æ®ï¼Œä¸”该页 +å¯ä»¥åƒå¾€å¸¸ä¸€æ ·è¢«å†™å…¥äº¤æ¢ç©ºé—´ã€‚ + +请注æ„,如果一个页é¢è¢«å˜å‚¨ï¼Œè€Œè¯¥é¡µé¢å·²ç»å˜åœ¨äºŽtranscendent memoryä¸ï¼ˆä¸€ä¸ª “é‡å¤â€ +çš„å˜å‚¨ï¼‰ï¼Œè¦ä¹ˆå˜å‚¨æˆåŠŸï¼Œæ•°æ®è¢«è¦†ç›–,è¦ä¹ˆå˜å‚¨å¤±è´¥ï¼Œè¯¥é¡µé¢è¢«åºŸæ¢ã€‚这确ä¿äº†æ—§çš„æ•°æ®æ°¸è¿œ +ä¸ä¼šä»Žfrontswapä¸èŽ·å¾—。 + +如果é…ç½®æ£ç¡®ï¼Œå¯¹frontswap的监控是通过 `/sys/kernel/debug/frontswap` 目录下的 +debugfs完æˆçš„。frontswap的有效性å¯ä»¥é€šè¿‡ä»¥ä¸‹æ–¹å¼æµ‹é‡ï¼ˆåœ¨æ‰€æœ‰äº¤æ¢è®¾å¤‡ä¸ï¼‰: + +``failed_stores`` + 有多少次å˜å‚¨çš„å°è¯•æ˜¯å¤±è´¥çš„ + +``loads`` + å°è¯•äº†å¤šå°‘æ¬¡åŠ è½½ï¼ˆåº”è¯¥å…¨éƒ¨æˆåŠŸï¼‰ + +``succ_stores`` + 有多少次å˜å‚¨çš„å°è¯•æ˜¯æˆåŠŸçš„ + +``invalidates`` + å°è¯•äº†å¤šå°‘次作废 + +åŽå°å®žçŽ°å¯ä»¥æä¾›é¢å¤–çš„æŒ‡æ ‡ã€‚ + +ç»å¸¸é—®åˆ°çš„问题 +============== + +* 价值在哪里? + +当一个工作负载开始交æ¢æ—¶ï¼Œæ€§èƒ½å°±ä¼šä¸‹é™ã€‚Frontswap通过æ供一个干净的ã€åŠ¨æ€çš„接å£æ¥ +读å–和写入交æ¢é¡µåˆ° “transcendent memoryâ€ï¼Œä»Žè€Œå¤§å¤§å¢žåŠ äº†è®¸å¤šè¿™æ ·çš„å·¥ä½œè´Ÿè½½çš„æ€§ +能,å¦åˆ™å†…æ ¸æ˜¯æ— æ³•ç›´æŽ¥å¯»å€çš„。当数æ®è¢«è½¬æ¢ä¸ºä¸åŒçš„å½¢å¼å’Œå¤§å°ï¼ˆæ¯”如压缩)或者被秘密 +移动(对于一些类似RAM的设备æ¥è¯´ï¼Œè¿™å¯èƒ½å¯¹å†™å¹³è¡¡å¾ˆæœ‰ç”¨ï¼‰æ—¶ï¼Œè¿™ä¸ªæŽ¥å£æ˜¯ç†æƒ³çš„ã€‚äº¤æ¢ +页(和被驱é€çš„页é¢ç¼“å˜é¡µï¼‰æ˜¯è¿™ç§æ¯”RAM慢但比ç£ç›˜å¿«å¾—多的“伪RAM设备â€çš„一大用途。 + +Frontswapå¯¹å†…æ ¸çš„å½±å“相当å°ï¼Œä¸ºå„ç§ç³»ç»Ÿé…ç½®ä¸æ›´åŠ¨æ€ã€æ›´çµæ´»çš„RAM利用æ供了巨大的 +çµæ´»æ€§ï¼š + +在å•ä¸€å†…æ ¸çš„æƒ…å†µä¸‹ï¼Œåˆç§°â€œzcacheâ€ï¼Œé¡µé¢è¢«åŽ‹ç¼©å¹¶å˜å‚¨åœ¨æœ¬åœ°å†…å˜ä¸ï¼Œä»Žè€Œå¢žåŠ 了å¯ä»¥å®‰ +å…¨ä¿å˜åœ¨RAMä¸çš„匿å页é¢æ€»æ•°ã€‚Zcache本质上是用压缩/解压缩的CPU周期æ¢å–更好的内å˜åˆ© +用率。Benchmarks测试显示,当内å˜åŽ‹åŠ›è¾ƒä½Žæ—¶ï¼Œå‡ 乎没有影å“,而在高内å˜åŽ‹åŠ›ä¸‹çš„一些 +工作负载上,则有明显的性能改善(25%以上)。 + +“RAMster†在zcacheçš„åŸºç¡€ä¸Šå¢žåŠ äº†å¯¹é›†ç¾¤ç³»ç»Ÿçš„ “peer-to-peer†transcendent memory +的支æŒã€‚Frontswap页é¢åƒzcacheä¸€æ ·è¢«æœ¬åœ°åŽ‹ç¼©ï¼Œä½†éšåŽè¢«â€œremotified†到å¦ä¸€ä¸ªç³» +统的RAM。这使得RAMå¯ä»¥æ ¹æ®éœ€è¦åŠ¨æ€åœ°æ¥å›žè´Ÿè½½å¹³è¡¡ï¼Œä¹Ÿå°±æ˜¯è¯´ï¼Œå½“系统A超载时,它å¯ä»¥ +交æ¢åˆ°ç³»ç»ŸB,å之亦然。RAMster也å¯ä»¥è¢«é…ç½®æˆä¸€ä¸ªå†…å˜æœåŠ¡å™¨ï¼Œå› æ¤é›†ç¾¤ä¸çš„许多æœåŠ¡å™¨ +å¯ä»¥æ ¹æ®éœ€è¦åŠ¨æ€åœ°äº¤æ¢åˆ°é…置有大é‡å†…å˜çš„å•ä¸€æœåŠ¡å™¨ä¸Š......而ä¸éœ€è¦é¢„å…ˆé…ç½®æ¯ä¸ªå®¢æˆ· +有多少内å˜å¯ç”¨ + +在虚拟情况下,虚拟化的全部æ„义在于统计地将物ç†èµ„æºåœ¨å¤šä¸ªè™šæ‹Ÿæœºçš„ä¸åŒéœ€æ±‚ä¹‹é—´è¿›è¡Œå¤ +用。对于RAMæ¥è¯´ï¼Œè¿™çœŸçš„很难åšåˆ°ï¼Œè€Œä¸”在ä¸æ”¹å˜å†…æ ¸çš„æƒ…å†µä¸‹ï¼Œè¦åšå¥½è¿™ä¸€ç‚¹çš„努力基本上 +是失败的(除了一些广为人知的特殊情况下的工作负载)。具体æ¥è¯´ï¼ŒXen Transcendent Memory +åŽç«¯å…许管ç†å™¨æ‹¥æœ‰çš„RAM “fallowâ€ï¼Œä¸ä»…å¯ä»¥åœ¨å¤šä¸ªè™šæ‹Ÿæœºä¹‹é—´è¿›è¡Œâ€œtime-sharedâ€ï¼Œ +而且页é¢å¯ä»¥è¢«åŽ‹ç¼©å’Œé‡å¤åˆ©ç”¨ï¼Œä»¥ä¼˜åŒ–RAM的利用率。当客户æ“作系统被诱导交出未充分利用 +çš„RAM时(如 “selfballooningâ€ï¼‰ï¼Œçªç„¶å‡ºçŽ°çš„æ„外内å˜åŽ‹åŠ›å¯èƒ½ä¼šå¯¼è‡´äº¤æ¢ï¼›frontswap +å…许这些页é¢è¢«äº¤æ¢åˆ°ç®¡ç†å™¨RAMä¸æˆ–从管ç†å™¨RAMä¸äº¤æ¢ï¼ˆå¦‚果整体主机系统内å˜æ¡ä»¶å…许), +从而å‡è½»è®¡åˆ’外交æ¢å¯èƒ½å¸¦æ¥çš„å¯æ€•çš„性能影å“。 + +一个KVM的实现æ£åœ¨è¿›è¡Œä¸ï¼Œå¹¶ä¸”å·²ç»è¢«RFC'ed到lkml。而且,利用frontswap,对NVM作为 +内å˜æ‰©å±•æŠ€æœ¯çš„调查也在进行ä¸ã€‚ + +* 当然,在æŸäº›æƒ…况下å¯èƒ½æœ‰æ€§èƒ½ä¸Šçš„优势,但frontswap的空间/时间开销是多少? + +如果 CONFIG_FRONTSWAP 被ç¦ç”¨ï¼Œæ¯ä¸ª frontswap é’©å都会编译æˆç©ºï¼Œå”¯ä¸€çš„å¼€é”€æ˜¯æ¯ +个 swapon'ed swap è®¾å¤‡çš„å‡ ä¸ªé¢å¤–å—节。如果 CONFIG_FRONTSWAP 被å¯ç”¨ï¼Œä½†æ²¡æœ‰ +frontswapçš„ “backend†寄å˜å™¨ï¼Œæ¯è¯»æˆ–写一个交æ¢é¡µå°±ä¼šæœ‰ä¸€ä¸ªé¢å¤–的全局å˜é‡ï¼Œè€Œä¸ +是零。如果 CONFIG_FRONTSWAP 被å¯ç”¨ï¼Œå¹¶ä¸”有一个frontswapçš„backend寄å˜å™¨ï¼Œå¹¶ä¸” +åŽç«¯æ¯æ¬¡ “store†请求都失败(å³å°½ç®¡å£°ç§°å¯èƒ½ï¼Œä½†æ²¡æœ‰æ供内å˜ï¼‰ï¼ŒCPU 的开销ä»ç„¶å¯ä»¥ +忽略ä¸è®¡ - å› ä¸ºæ¯æ¬¡frontswap失败都是在交æ¢é¡µå†™åˆ°ç£ç›˜ä¹‹å‰ï¼Œç³»ç»Ÿå¾ˆå¯èƒ½æ˜¯ I/O 绑定 +çš„ï¼Œæ— è®ºå¦‚ä½•ä½¿ç”¨ä¸€å°éƒ¨åˆ†çš„ CPU 都是ä¸ç›¸å…³çš„。 + +至于空间,如果CONFIG_FRONTSWAP被å¯ç”¨ï¼Œå¹¶ä¸”有一个frontswapçš„backend注册,那么 +æ¯ä¸ªäº¤æ¢è®¾å¤‡çš„æ¯ä¸ªäº¤æ¢é¡µéƒ½ä¼šè¢«åˆ†é…ä¸€ä¸ªæ¯”ç‰¹ã€‚è¿™æ˜¯åœ¨å†…æ ¸å·²ç»ä¸ºæ¯ä¸ªäº¤æ¢è®¾å¤‡çš„æ¯ä¸ªäº¤æ¢ +页分é…çš„8ä½ï¼ˆåœ¨2.6.34之å‰æ˜¯16ä½ï¼‰ä¸Šå¢žåŠ 的。(Hugh Dickins观察到,frontswapå¯èƒ½ +会å·å–现有的8个比特,但是我们以åŽå†æ¥æ‹…心这个å°çš„优化问题)ã€‚å¯¹äºŽæ ‡å‡†çš„4K页é¢å¤§å°çš„ +éžå¸¸å¤§çš„交æ¢ç›˜ï¼ˆè¿™å¾ˆç½•è§ï¼‰ï¼Œè¿™æ˜¯æ¯32GB交æ¢ç›˜1MB开销。 + +当交æ¢é¡µå˜å‚¨åœ¨transcendent memoryä¸è€Œä¸æ˜¯å†™åˆ°ç£ç›˜ä¸Šæ—¶ï¼Œæœ‰ä¸€ä¸ªå‰¯ä½œç”¨ï¼Œå³è¿™å¯èƒ½ä¼š +产生更多的内å˜åŽ‹åŠ›ï¼Œæœ‰å¯èƒ½è¶…过其他的优点。一个backend,比如zcache,必须实现ç–ç•¥ +æ¥ä»”细(但动æ€åœ°ï¼‰ç®¡ç†å†…å˜é™åˆ¶ï¼Œä»¥ç¡®ä¿è¿™ç§æƒ…况ä¸ä¼šå‘生。 + +* 好å§ï¼Œé‚£å°±ç”¨å†…æ ¸éª‡å®¢èƒ½ç†è§£çš„术è¯æ¥å¿«é€Ÿæ¦‚述一下这个frontswapè¡¥ä¸çš„作用如何? + +我们å‡è®¾åœ¨å†…æ ¸åˆå§‹åŒ–过程ä¸ï¼Œä¸€ä¸ªfrontswap çš„ “backend†已ç»æ³¨å†Œäº†ï¼›è¿™ä¸ªæ³¨å†Œè¡¨ +明这个frontswap çš„ “backend†å¯ä»¥è®¿é—®ä¸€äº›ä¸è¢«å†…æ ¸ç›´æŽ¥è®¿é—®çš„â€œå†…å˜â€ã€‚它到底æ +供了多少内å˜æ˜¯å®Œå…¨åŠ¨æ€å’Œéšæœºçš„。 + +æ¯å½“一个交æ¢è®¾å¤‡è¢«äº¤æ¢æ—¶ï¼Œå°±ä¼šè°ƒç”¨frontswap_init(),把交æ¢è®¾å¤‡çš„ç¼–å·ï¼ˆåˆç§°â€œç±» +åž‹â€ï¼‰ä½œä¸ºä¸€ä¸ªå‚æ•°ä¼ ç»™å®ƒã€‚è¿™å°±é€šçŸ¥äº†frontswap,以期待 “store†与该å·ç 相关的交 +æ¢é¡µçš„å°è¯•ã€‚ + +æ¯å½“交æ¢å系统准备将一个页é¢å†™å…¥äº¤æ¢è®¾å¤‡æ—¶ï¼ˆå‚è§swap_writepage()),就会调用 +frontswap_store。Frontswap与frontswap backendå商,如果backend说它没有空 +间,frontswap_store返回-1ï¼Œå†…æ ¸å°±ä¼šç…§å¸¸æŠŠé¡µæ¢åˆ°äº¤æ¢è®¾å¤‡ä¸Šã€‚注æ„,æ¥è‡ªfrontswap +backendçš„å“åº”å¯¹å†…æ ¸æ¥è¯´æ˜¯ä¸å¯é¢„测的;它å¯èƒ½é€‰æ‹©ä»Žä¸æŽ¥å—一个页é¢ï¼Œå¯èƒ½æŽ¥å—æ¯ä¹ä¸ª +页é¢ï¼Œä¹Ÿå¯èƒ½æŽ¥å—æ¯ä¸€ä¸ªé¡µé¢ã€‚但是如果backend确实接å—了一个页é¢ï¼Œé‚£ä¹ˆè¿™ä¸ªé¡µé¢çš„æ•° +æ®å·²ç»è¢«å¤åˆ¶å¹¶ä¸Žç±»åž‹å’Œå移é‡ç›¸å…³è”了,而且backendä¿è¯äº†æ•°æ®çš„æŒä¹…性。在这ç§æƒ…况 +下,frontswap在交æ¢è®¾å¤‡çš„“frontswap_map†ä¸è®¾ç½®äº†ä¸€ä¸ªä½ï¼Œå¯¹åº”于交æ¢è®¾å¤‡ä¸Šçš„ +页é¢å移é‡ï¼Œå¦åˆ™å®ƒå°±ä¼šå°†æ•°æ®å†™å…¥è¯¥è®¾å¤‡ã€‚ + +当交æ¢å系统需è¦äº¤æ¢ä¸€ä¸ªé¡µé¢æ—¶ï¼ˆswap_readpage()),它首先调用frontswap_load(), +检查frontswap_map,看这个页é¢æ˜¯å¦æ—©å…ˆè¢«frontswap backend接å—。如果是,该页 +çš„æ•°æ®å°±ä¼šä»ŽfrontswapåŽç«¯å¡«å……,æ¢å…¥å°±å®Œæˆäº†ã€‚如果ä¸æ˜¯ï¼Œæ£å¸¸çš„交æ¢ä»£ç 将被执行, +以便从真æ£çš„交æ¢è®¾å¤‡ä¸ŠèŽ·å¾—这一页的数æ®ã€‚ + +所以æ¯æ¬¡frontswap backend接å—一个页é¢æ—¶ï¼Œäº¤æ¢è®¾å¤‡çš„读å–和(å¯èƒ½ï¼‰äº¤æ¢è®¾å¤‡çš„写 +入都被 “frontswap backend store†和(å¯èƒ½ï¼‰â€œfrontswap backend loads†+所å–代,这å¯èƒ½ä¼šå¿«å¾—多。 + +* frontswapä¸èƒ½è¢«é…置为一个 “特殊的†交æ¢è®¾å¤‡ï¼Œå®ƒçš„优先级è¦é«˜äºŽä»»ä½•çœŸæ£çš„äº¤æ¢ + 设备(例如åƒzswap,或者å¯èƒ½æ˜¯swap-over-nbd/NFS)? + +首先,现有的交æ¢å系统ä¸å…许有任何ç§ç±»çš„交æ¢å±‚次结构。也许它å¯ä»¥è¢«é‡å†™ä»¥é€‚应层次 +结构,但这将需è¦ç›¸å½“大的改å˜ã€‚å³ä½¿å®ƒè¢«é‡å†™ï¼ŒçŽ°æœ‰çš„交æ¢å系统也使用了å—I/O层,它 +å‡å®šäº¤æ¢è®¾å¤‡æ˜¯å›ºå®šå¤§å°çš„,其ä¸çš„任何页é¢éƒ½æ˜¯å¯çº¿æ€§å¯»å€çš„。Frontswapå‡ ä¹Žæ²¡æœ‰è§¦ +åŠçŽ°æœ‰çš„交æ¢å系统,而是围绕ç€å—I/Oå系统的é™åˆ¶ï¼Œæ供了大é‡çš„çµæ´»æ€§å’ŒåŠ¨æ€æ€§ã€‚ + +例如,frontswap backend对任何交æ¢é¡µçš„接å—是完全ä¸å¯é¢„测的。这对frontswap backend +的定义至关é‡è¦ï¼Œå› 为它赋予了backend完全动æ€çš„决定æƒã€‚在zcacheä¸ï¼Œäººä»¬æ— 法预 +先知é“一个页é¢çš„å¯åŽ‹ç¼©æ€§å¦‚何。å¯åŽ‹ç¼©æ€§ “差†的页é¢ä¼šè¢«æ‹’ç»ï¼Œè€Œ â€œå·®â€ æœ¬èº«ä¹Ÿå¯ +ä»¥æ ¹æ®å½“å‰çš„内å˜é™åˆ¶åŠ¨æ€åœ°å®šä¹‰ã€‚ + +æ¤å¤–,frontswap是完全åŒæ¥çš„,而真æ£çš„交æ¢è®¾å¤‡ï¼Œæ ¹æ®å®šä¹‰ï¼Œæ˜¯å¼‚æ¥çš„,并且使用 +å—I/O。å—I/O层ä¸ä»…是ä¸å¿…è¦çš„,而且å¯èƒ½è¿›è¡Œ “优化â€ï¼Œè¿™å¯¹é¢å‘RAM的设备æ¥è¯´æ˜¯ +ä¸åˆé€‚的,包括将一些页é¢çš„写入延迟相当长的时间。åŒæ¥æ˜¯å¿…须的,以确ä¿åŽç«¯çš„动 +æ€æ€§ï¼Œå¹¶é¿å…棘手的竞争æ¡ä»¶ï¼Œè¿™å°†ä¸å¿…è¦åœ°å¤§å¤§å¢žåŠ frontswapå’Œ/或å—I/Oå系统的 +å¤æ‚性。也就是说,åªæœ‰æœ€åˆçš„ “store†和 “load†æ“作是需è¦åŒæ¥çš„。一个独立 +的异æ¥çº¿ç¨‹å¯ä»¥è‡ªç”±åœ°æ“作由frontswapå˜å‚¨çš„页é¢ã€‚例如,RAMsterä¸çš„ “remotification†+çº¿ç¨‹ä½¿ç”¨æ ‡å‡†çš„å¼‚æ¥å†…æ ¸å¥—æŽ¥å—,将压缩的frontswap页é¢ç§»åŠ¨åˆ°è¿œç¨‹æœºå™¨ã€‚åŒæ ·ï¼Œ +KVM的客户方实现å¯ä»¥è¿›è¡Œå®¢æˆ·å†…压缩,并使用 “batched†hypercalls。 + +在虚拟化环境ä¸ï¼ŒåŠ¨æ€æ€§å…许管ç†ç¨‹åºï¼ˆæˆ–主机æ“作系统)åšâ€œintelligent overcommitâ€ã€‚ +例如,它å¯ä»¥é€‰æ‹©åªæŽ¥å—页é¢ï¼Œç›´åˆ°ä¸»æœºäº¤æ¢å¯èƒ½å³å°†å‘生,然åŽå¼ºè¿«å®¢æˆ·æœºåšä»–们 +自己的交æ¢ã€‚ + +transcendent memoryè§„æ ¼çš„frontswap有一个åå¤„ã€‚å› ä¸ºä»»ä½• “storeâ€ éƒ½å¯ +能失败,所以必须在一个真æ£çš„交æ¢è®¾å¤‡ä¸Šæœ‰ä¸€ä¸ªçœŸæ£çš„æ’槽æ¥äº¤æ¢é¡µé¢ã€‚å› æ¤ï¼Œ +frontswap必须作为æ¯ä¸ªäº¤æ¢è®¾å¤‡çš„ “影å†æ¥å®žçŽ°ï¼Œå®ƒæœ‰å¯èƒ½å®¹çº³äº¤æ¢è®¾å¤‡å¯èƒ½ +容纳的æ¯ä¸€ä¸ªé¡µé¢ï¼Œä¹Ÿæœ‰å¯èƒ½æ ¹æœ¬ä¸å®¹çº³ä»»ä½•é¡µé¢ã€‚è¿™æ„味ç€frontswapä¸èƒ½åŒ…å«æ¯” +swap设备总数更多的页é¢ã€‚例如,如果在æŸäº›å®‰è£…上没有é…置交æ¢è®¾å¤‡ï¼Œfrontswap +å°±æ²¡æœ‰ç”¨ã€‚æ— äº¤æ¢è®¾å¤‡çš„便æºå¼è®¾å¤‡ä»ç„¶å¯ä»¥ä½¿ç”¨frontswap,但是这ç§è®¾å¤‡çš„ +backendå¿…é¡»é…ç½®æŸç§ “ghost†交æ¢è®¾å¤‡ï¼Œå¹¶ç¡®ä¿å®ƒæ°¸è¿œä¸ä¼šè¢«ä½¿ç”¨ã€‚ + + +* 为什么会有这ç§å…³äºŽ “é‡å¤å˜å‚¨â€ 的奇怪定义?如果一个页é¢ä»¥å‰è¢«æˆåŠŸåœ°å˜å‚¨è¿‡ï¼Œ + éš¾é“它ä¸èƒ½æ€»æ˜¯è¢«æˆåŠŸåœ°è¦†ç›–å—? + +å‡ ä¹Žæ€»æ˜¯å¯ä»¥çš„,ä¸ï¼Œæœ‰æ—¶ä¸èƒ½ã€‚考虑一个例å,数æ®è¢«åŽ‹ç¼©äº†ï¼ŒåŽŸæ¥çš„4K页é¢è¢«åŽ‹ +缩到了1K。现在,有人试图用ä¸å¯åŽ‹ç¼©çš„æ•°æ®è¦†ç›–è¯¥é¡µï¼Œå› æ¤ä¼šå 用整个4K。但是 +backend没有更多的空间了。在这ç§æƒ…况下,这个å˜å‚¨å¿…须被拒ç»ã€‚æ¯å½“frontswap +æ‹’ç»ä¸€ä¸ªä¼šè¦†ç›–çš„å˜å‚¨æ—¶ï¼Œå®ƒä¹Ÿå¿…须使旧的数æ®ä½œåºŸï¼Œå¹¶ç¡®ä¿å®ƒä¸å†è¢«è®¿é—®ã€‚å› ä¸ºäº¤ +æ¢å系统会把新的数æ®å†™åˆ°è¯»äº¤æ¢è®¾å¤‡ä¸Šï¼Œè¿™æ˜¯ç¡®ä¿ä¸€è‡´æ€§çš„æ£ç¡®åšæ³•ã€‚ + +* 为什么frontswapè¡¥ä¸ä¼šåˆ›å»ºæ–°çš„头文件swapfile.h? + +frontswap代ç ä¾èµ–于一些swapå系统内部的数æ®ç»“构,这些数æ®ç»“构多年æ¥ä¸€ç›´ +在é™æ€å’Œå…¨å±€ä¹‹é—´æ¥å›žç§»åŠ¨ã€‚这似乎是一个åˆç†çš„妥å:将它们定义为全局,但在一 +个新的包å«æ–‡ä»¶ä¸å£°æ˜Žå®ƒä»¬ï¼Œè¯¥æ–‡ä»¶ä¸è¢«åŒ…å«swap.h的大é‡æºæ–‡ä»¶æ‰€åŒ…å«ã€‚ + +Dan Magenheimer,最åŽæ›´æ–°äºŽ2012å¹´4月9æ—¥ diff --git a/Documentation/translations/zh_CN/vm/hmm.rst b/Documentation/translations/zh_CN/vm/hmm.rst new file mode 100644 index 000000000000..2379df95aa58 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/hmm.rst @@ -0,0 +1,361 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/vm/hmm.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + +================== +异构内å˜ç®¡ç† (HMM) +================== + +æ供基础设施和帮助程åºä»¥å°†éžå¸¸è§„内å˜ï¼ˆè®¾å¤‡å†…å˜ï¼Œå¦‚æ¿ä¸Š GPU 内å˜ï¼‰é›†æˆåˆ°å¸¸è§„å†…æ ¸è·¯å¾„ä¸ï¼Œå…¶ +基石是æ¤ç±»å†…å˜çš„专用struct page(请å‚阅本文档的第 5 至 7 节)。 + +HMM 还为 SVM(共享虚拟内å˜ï¼‰æ供了å¯é€‰çš„帮助程åºï¼Œå³å…许设备é€æ˜Žåœ°è®¿é—®ä¸Ž CPU ä¸€è‡´çš„ç¨‹åº +地å€ï¼Œè¿™æ„å‘³ç€ CPU 上的任何有效指针也是该设备的有效指针。这对于简化高级异构计算的使用å˜å¾— +å¿…ä¸å¯å°‘ï¼Œå…¶ä¸ GPUã€DSP 或 FPGA 用于代表进程执行å„ç§è®¡ç®—。 + +本文档分为以下部分:在第一部分ä¸ï¼Œæˆ‘æ示了与使用特定于设备的内å˜åˆ†é…器相关的问题。在第二 +部分ä¸ï¼Œæˆ‘æ示了许多平å°å›ºæœ‰çš„硬件é™åˆ¶ã€‚第三部分概述了 HMM 设计。第四部分解释了 CPU 页 +表镜åƒçš„工作原ç†ä»¥åŠ HMM 在这ç§æƒ…况下的目的。第五部分处ç†å†…æ ¸ä¸å¦‚何表示设备内å˜ã€‚最åŽï¼Œ +最åŽä¸€èŠ‚介ç»äº†ä¸€ä¸ªæ–°çš„è¿ç§»åŠ©æ‰‹ï¼Œå®ƒå…许利用设备 DMA 引擎。 + +.. contents:: :local: + +使用特定于设备的内å˜åˆ†é…器的问题 +================================ + +具有大é‡æ¿è½½å†…å˜ï¼ˆå‡ GB)的设备(如 GPU)历æ¥é€šè¿‡ä¸“用驱动程åºç‰¹å®š API 管ç†å…¶å†…å˜ã€‚这会 +é€ æˆè®¾å¤‡é©±åŠ¨ç¨‹åºåˆ†é…和管ç†çš„内å˜ä¸Žå¸¸è§„应用程åºå†…å˜ï¼ˆç§æœ‰åŒ¿åã€å…±äº«å†…å˜æˆ–常规文件支æŒå†…å˜ï¼‰ +之间的隔æ–。从这里开始,我将把这个方é¢ç§°ä¸ºåˆ†å‰²çš„地å€ç©ºé—´ã€‚我使用共享地å€ç©ºé—´æ¥æŒ‡ä»£ç›¸å的情况: +å³ï¼Œè®¾å¤‡å¯ä»¥é€æ˜Žåœ°ä½¿ç”¨ä»»ä½•åº”用程åºå†…å˜åŒºåŸŸã€‚ + +分割的地å€ç©ºé—´çš„å‘ç”Ÿæ˜¯å› ä¸ºè®¾å¤‡åªèƒ½è®¿é—®é€šè¿‡è®¾å¤‡ç‰¹å®š API 分é…的内å˜ã€‚è¿™æ„味ç€ä»Žè®¾å¤‡çš„è§’åº¦æ¥ +看,程åºä¸çš„所有内å˜å¯¹è±¡å¹¶ä¸å¹³ç‰ï¼Œè¿™ä½¿å¾—ä¾èµ–于广泛的库的大型程åºå˜å¾—å¤æ‚。 + +具体æ¥è¯´ï¼Œè¿™æ„味ç€æƒ³è¦åˆ©ç”¨åƒ GPU è¿™æ ·çš„è®¾å¤‡çš„ä»£ç 需è¦åœ¨é€šç”¨åˆ†é…的内å˜ï¼ˆmallocã€mmap +ç§æœ‰ã€mmap å…±äº«ï¼‰å’Œé€šè¿‡è®¾å¤‡é©±åŠ¨ç¨‹åº API 分é…的内å˜ä¹‹é—´å¤åˆ¶å¯¹è±¡ï¼ˆè¿™ä»ç„¶ä»¥ mmap 结æŸï¼Œ +但是是设备文件)。 + +对于平é¢æ•°æ®é›†ï¼ˆæ•°ç»„ã€ç½‘æ ¼ã€å›¾åƒâ€¦â€¦ï¼‰ï¼Œè¿™å¹¶ä¸éš¾å®žçŽ°ï¼Œä½†å¯¹äºŽå¤æ‚æ•°æ®é›†ï¼ˆåˆ—表ã€æ ‘……), +很难åšåˆ°æ£ç¡®ã€‚å¤åˆ¶ä¸€ä¸ªå¤æ‚çš„æ•°æ®é›†éœ€è¦é‡æ–°æ˜ å°„å…¶æ¯ä¸ªå…ƒç´ 之间的所有指针关系。这很容易出错, +而且由于数æ®é›†å’Œåœ°å€çš„é‡å¤ï¼Œç¨‹åºæ›´éš¾è°ƒè¯•ã€‚ + +分割地å€ç©ºé—´ä¹Ÿæ„味ç€åº“ä¸èƒ½é€æ˜Žåœ°ä½¿ç”¨å®ƒä»¬ä»Žæ ¸å¿ƒç¨‹åºæˆ–å¦ä¸€ä¸ªåº“ä¸èŽ·å¾—çš„æ•°æ®ï¼Œå› æ¤æ¯ä¸ªåº“å¯èƒ½ +ä¸å¾—ä¸ä½¿ç”¨è®¾å¤‡ç‰¹å®šçš„内å˜åˆ†é…器æ¥é‡å¤å…¶è¾“入数æ®é›†ã€‚å¤§åž‹é¡¹ç›®ä¼šå› æ¤å—到影å“ï¼Œå¹¶å› ä¸ºå„ç§å†…å˜ +æ‹·è´è€Œæµªè´¹èµ„æºã€‚ + +å¤åˆ¶æ¯ä¸ªåº“çš„API以接å—æ¯ä¸ªè®¾å¤‡ç‰¹å®šåˆ†é…器分é…的内å˜ä½œä¸ºè¾“入或输出,并ä¸æ˜¯ä¸€ä¸ªå¯è¡Œçš„选择。 +这将导致库入å£ç‚¹çš„组åˆçˆ†ç‚¸ã€‚ + +最åŽï¼Œéšç€é«˜çº§è¯è¨€ç»“构(在 C++ ä¸ï¼Œå½“然也在其他è¯è¨€ä¸ï¼‰çš„è¿›æ¥ï¼Œç¼–译器现在有å¯èƒ½åœ¨æ²¡æœ‰ç¨‹ +åºå‘˜å¹²é¢„的情况下利用 GPU 和其他设备。æŸäº›ç¼–译器识别的模å¼ä»…适用于共享地å€ç©ºé—´ã€‚对所有 +其他模å¼ï¼Œä½¿ç”¨å…±äº«åœ°å€ç©ºé—´ä¹Ÿæ›´åˆç†ã€‚ + + +I/O 总线ã€è®¾å¤‡å†…å˜ç‰¹æ€§ +====================== + +由于一些é™åˆ¶ï¼ŒI/O 总线削弱了共享地å€ç©ºé—´ã€‚大多数 I/O 总线åªå…许从设备到主内å˜çš„基本 +内å˜è®¿é—®ï¼›ç”šè‡³ç¼“å˜ä¸€è‡´æ€§é€šå¸¸æ˜¯å¯é€‰çš„。从 CPU 访问设备内å˜ç”šè‡³æ›´åŠ 有é™ã€‚通常情况下,它 +ä¸æ˜¯ç¼“å˜ä¸€è‡´çš„。 + +如果我们åªè€ƒè™‘ PCIE 总线,那么设备å¯ä»¥è®¿é—®ä¸»å†…å˜ï¼ˆé€šå¸¸é€šè¿‡ IOMMU)并与 CPU 缓å˜ä¸€ +致。但是,它åªå…许设备对主å˜å‚¨å™¨è¿›è¡Œä¸€ç»„有é™çš„原åæ“作。这在å¦ä¸€ä¸ªæ–¹å‘上更糟:CPU +åªèƒ½è®¿é—®æœ‰é™èŒƒå›´çš„设备内å˜ï¼Œè€Œä¸èƒ½å¯¹å…¶æ‰§è¡ŒåŽŸåæ“ä½œã€‚å› æ¤ï¼Œä»Žå†…æ ¸çš„è§’åº¦æ¥çœ‹ï¼Œè®¾å¤‡å†…å˜ä¸ +能被视为与常规内å˜ç‰åŒã€‚ + +å¦ä¸€ä¸ªä¸¥é‡çš„å› ç´ æ˜¯å¸¦å®½æœ‰é™ï¼ˆçº¦ 32GBytes/s,PCIE 4.0 å’Œ 16 通é“)。这比最快的 GPU +å†…å˜ (1 TBytes/s) æ…¢ 33 å€ã€‚最åŽä¸€ä¸ªé™åˆ¶æ˜¯å»¶è¿Ÿã€‚从设备访问主内å˜çš„延迟比设备访问自 +己的内å˜æ—¶é«˜ä¸€ä¸ªæ•°é‡çº§ã€‚ + +一些平å°æ£åœ¨å¼€å‘æ–°çš„ I/O 总线或对 PCIE çš„æ·»åŠ /修改以解决其ä¸ä¸€äº›é™åˆ¶ +(OpenCAPIã€CCIX)。它们主è¦å…许 CPU 和设备之间的åŒå‘缓å˜ä¸€è‡´æ€§ï¼Œå¹¶å…许架构支æŒçš„所 +有原åæ“作。é—憾的是,并éžæ‰€æœ‰å¹³å°éƒ½éµå¾ªè¿™ä¸€è¶‹åŠ¿ï¼Œå¹¶ä¸”一些主è¦æž¶æž„没有针对这些问题的硬 +件解决方案。 + +å› æ¤ï¼Œä¸ºäº†ä½¿å…±äº«åœ°å€ç©ºé—´æœ‰æ„义,我们ä¸ä»…å¿…é¡»å…许设备访问任何内å˜ï¼Œè€Œä¸”还必须å…许任何内 +å˜åœ¨è®¾å¤‡ä½¿ç”¨æ—¶è¿ç§»åˆ°è®¾å¤‡å†…å˜ï¼ˆåœ¨è¿ç§»æ—¶é˜»æ¢ CPU 访问)。 + + +共享地å€ç©ºé—´å’Œè¿ç§» +================== + +HMM 打算æ供两个主è¦åŠŸèƒ½ã€‚第一个是通过å¤åˆ¶cpu页表到设备页表ä¸æ¥å…±äº«åœ°å€ç©ºé—´ï¼Œå› æ¤å¯¹ +于进程地å€ç©ºé—´ä¸çš„任何有效主内å˜åœ°å€ï¼Œç›¸åŒçš„地å€æŒ‡å‘相åŒçš„物ç†å†…å˜ã€‚ + +为了实现这一点,HMM æ供了一组帮助程åºæ¥å¡«å……设备页表,åŒæ—¶è·Ÿè¸ª CPU 页表更新。设备页表 +æ›´æ–°ä¸åƒ CPU 页表更新那么容易。è¦æ›´æ–°è®¾å¤‡é¡µè¡¨ï¼Œæ‚¨å¿…须分é…一个缓冲区(或使用预先分é…çš„ +ç¼“å†²åŒºæ± ï¼‰å¹¶åœ¨å…¶ä¸å†™å…¥ GPU 特定命令以执行更新(å–æ¶ˆæ˜ å°„ã€ç¼“å˜å¤±æ•ˆå’Œåˆ·æ–°ç‰ï¼‰ã€‚è¿™ä¸èƒ½é€š +过所有设备的通用代ç æ¥å®Œæˆã€‚å› æ¤ï¼Œä¸ºä»€ä¹ˆHMMæ供了帮助器,在把硬件的具体细节留给设备驱 +动程åºçš„åŒæ—¶ï¼ŒæŠŠä¸€åˆ‡å¯ä»¥è€ƒè™‘çš„å› ç´ éƒ½è€ƒè™‘è¿›åŽ»äº†ã€‚ + +HMM æ供的第二ç§æœºåˆ¶æ˜¯ä¸€ç§æ–°çš„ ZONE_DEVICE 内å˜ï¼Œå®ƒå…许为设备内å˜çš„æ¯ä¸ªé¡µé¢åˆ†é…一个 +struct page。这些页é¢å¾ˆç‰¹æ®Šï¼Œå› 为 CPU æ— æ³•æ˜ å°„å®ƒä»¬ã€‚ç„¶è€Œï¼Œå®ƒä»¬å…许使用现有的è¿ç§»æœº +制将主内å˜è¿ç§»åˆ°è®¾å¤‡å†…å˜ï¼Œä»Ž CPU 的角度æ¥çœ‹ï¼Œä¸€åˆ‡çœ‹èµ·æ¥éƒ½åƒæ˜¯æ¢å‡ºåˆ°ç£ç›˜çš„页é¢ã€‚使用 +struct pageå¯ä»¥ä¸ŽçŽ°æœ‰çš„ mm 机制进行最简å•ã€æœ€å¹²å‡€çš„集æˆã€‚å†æ¬¡ï¼ŒHMM ä»…æ供帮助程åºï¼Œ +首先为设备内å˜çƒæ’拔新的 ZONE_DEVICE 内å˜ï¼Œç„¶åŽæ‰§è¡Œè¿ç§»ã€‚è¿ç§»å†…容和时间的ç–略决定留 +给设备驱动程åºã€‚ + +请注æ„,任何 CPU 对设备页é¢çš„访问都会触å‘缺页异常并è¿ç§»å›žä¸»å†…å˜ã€‚例如,当支æŒç»™å®šCPU +åœ°å€ A 的页é¢ä»Žä¸»å†…å˜é¡µé¢è¿ç§»åˆ°è®¾å¤‡é¡µé¢æ—¶ï¼Œå¯¹åœ°å€ A 的任何 CPU 访问都会触å‘缺页异常 +并å¯åŠ¨å‘主内å˜çš„è¿ç§»ã€‚ + +å‡å€Ÿè¿™ä¸¤ä¸ªç‰¹æ€§ï¼ŒHMM ä¸ä»…å…许设备镜åƒè¿›ç¨‹åœ°å€ç©ºé—´å¹¶ä¿æŒ CPU 和设备页表åŒæ¥ï¼Œè€Œä¸”还通 +过è¿ç§»è®¾å¤‡æ£åœ¨ä½¿ç”¨çš„æ•°æ®é›†éƒ¨åˆ†æ¥åˆ©ç”¨è®¾å¤‡å†…å˜ã€‚ + + +地å€ç©ºé—´é•œåƒå®žçŽ°å’ŒAPI +===================== + +地å€ç©ºé—´é•œåƒçš„主è¦ç›®æ ‡æ˜¯å…许将一定范围的 CPU 页表å¤åˆ¶åˆ°ä¸€ä¸ªè®¾å¤‡é¡µè¡¨ä¸ï¼›HMM 有助于 +ä¿æŒä¸¤è€…åŒæ¥ã€‚想è¦é•œåƒè¿›ç¨‹åœ°å€ç©ºé—´çš„设备驱动程åºå¿…须从注册 mmu_interval_notifier +开始:: + + int mmu_interval_notifier_insert(struct mmu_interval_notifier *interval_sub, + struct mm_struct *mm, unsigned long start, + unsigned long length, + const struct mmu_interval_notifier_ops *ops); + +在 ops->invalidate() 回调期间,设备驱动程åºå¿…须对范围执行更新æ“ä½œï¼ˆå°†èŒƒå›´æ ‡è®°ä¸ºåª +读,或完全å–æ¶ˆæ˜ å°„ç‰ï¼‰ã€‚设备必须在驱动程åºå›žè°ƒè¿”回之å‰å®Œæˆæ›´æ–°ã€‚ + +当设备驱动程åºæƒ³è¦å¡«å……一个虚拟地å€èŒƒå›´æ—¶ï¼Œå®ƒå¯ä»¥ä½¿ç”¨:: + + int hmm_range_fault(struct hmm_range *range); + +如果请求写访问,它将在丢失或åªè¯»æ¡ç›®ä¸Šè§¦å‘缺页异常(è§ä¸‹æ–‡ï¼‰ã€‚缺页异常使用通用的 mm 缺 +页异常代ç è·¯å¾„ï¼Œå°±åƒ CPU ç¼ºé¡µå¼‚å¸¸ä¸€æ ·ã€‚ + +这两个函数都将 CPU 页表æ¡ç›®å¤åˆ¶åˆ°å®ƒä»¬çš„ pfns 数组å‚æ•°ä¸ã€‚该数组ä¸çš„æ¯ä¸ªæ¡ç›®å¯¹åº”于虚拟 +范围ä¸çš„一个地å€ã€‚HMM æä¾›äº†ä¸€ç»„æ ‡å¿—æ¥å¸®åŠ©é©±åŠ¨ç¨‹åºè¯†åˆ«ç‰¹æ®Šçš„ CPU 页表项。 + +在 sync_cpu_device_pagetables() 回调ä¸é”定是驱动程åºå¿…须尊é‡çš„最é‡è¦çš„æ–¹é¢ï¼Œä»¥ä¿ +æŒäº‹ç‰©æ£ç¡®åŒæ¥ã€‚使用模å¼æ˜¯:: + + int driver_populate_range(...) + { + struct hmm_range range; + ... + + range.notifier = &interval_sub; + range.start = ...; + range.end = ...; + range.hmm_pfns = ...; + + if (!mmget_not_zero(interval_sub->notifier.mm)) + return -EFAULT; + + again: + range.notifier_seq = mmu_interval_read_begin(&interval_sub); + mmap_read_lock(mm); + ret = hmm_range_fault(&range); + if (ret) { + mmap_read_unlock(mm); + if (ret == -EBUSY) + goto again; + return ret; + } + mmap_read_unlock(mm); + + take_lock(driver->update); + if (mmu_interval_read_retry(&ni, range.notifier_seq) { + release_lock(driver->update); + goto again; + } + + /* Use pfns array content to update device page table, + * under the update lock */ + + release_lock(driver->update); + return 0; + } + +driver->update é”与驱动程åºåœ¨å…¶ invalidate() 回调ä¸ä½¿ç”¨çš„é”相åŒã€‚该é”必须在调用 +mmu_interval_read_retry() 之å‰ä¿æŒï¼Œä»¥é¿å…ä¸Žå¹¶å‘ CPU 页表更新å‘生任何竞争。 + +利用 default_flags å’Œ pfn_flags_mask +==================================== + +hmm_range 结构有 2 个å—段,default_flags å’Œ pfn_flags_mask,它们指定整个范围 +的故障或快照ç–略,而ä¸å¿…为 pfns 数组ä¸çš„æ¯ä¸ªæ¡ç›®è®¾ç½®å®ƒä»¬ã€‚ + +例如,如果设备驱动程åºéœ€è¦è‡³å°‘具有读å–æƒé™çš„范围的页é¢ï¼Œå®ƒä¼šè®¾ç½®:: + + range->default_flags = HMM_PFN_REQ_FAULT; + range->pfn_flags_mask = 0; + +并如上所述调用 hmm_range_fault()。这将填充至少具有读å–æƒé™çš„范围内的所有页é¢ã€‚ + +现在å‡è®¾é©±åŠ¨ç¨‹åºæƒ³è¦åšåŒæ ·çš„事情,除了它想è¦æ‹¥æœ‰å†™æƒé™çš„范围内的一页。现在驱动程åºè®¾ +ç½®:: + + range->default_flags = HMM_PFN_REQ_FAULT; + range->pfn_flags_mask = HMM_PFN_REQ_WRITE; + range->pfns[index_of_write] = HMM_PFN_REQ_WRITE; + +有了这个,HMM 将在至少读å–(å³æœ‰æ•ˆï¼‰çš„所有页é¢ä¸å¼‚å¸¸ï¼Œå¹¶ä¸”å¯¹äºŽåœ°å€ +== range->start + (index_of_write << PAGE_SHIFT) 它将异常写入æƒé™ï¼Œå³ï¼Œå¦‚æžœ +CPU pte 没有设置写æƒé™ï¼Œé‚£ä¹ˆHMM将调用handle_mm_fault()。 + +hmm_range_fault 完æˆåŽï¼Œæ ‡å¿—ä½è¢«è®¾ç½®ä¸ºé¡µè¡¨çš„当å‰çŠ¶æ€ï¼Œå³ HMM_PFN_VALID | 如果页 +é¢å¯å†™ï¼Œå°†è®¾ç½® HMM_PFN_WRITE。 + + +ä»Žæ ¸å¿ƒå†…æ ¸çš„è§’åº¦è¡¨ç¤ºå’Œç®¡ç†è®¾å¤‡å†…å˜ +================================== + +å°è¯•äº†å‡ ç§ä¸åŒçš„设计æ¥æ”¯æŒè®¾å¤‡å†…å˜ã€‚第一个使用特定于设备的数æ®ç»“æž„æ¥ä¿å˜æœ‰å…³è¿ç§»å†…å˜ +çš„ä¿¡æ¯ï¼ŒHMM 将自身挂接到 mm 代ç çš„å„个ä½ç½®ï¼Œä»¥å¤„ç†å¯¹è®¾å¤‡å†…å˜æ”¯æŒçš„地å€çš„任何访问。 +事实è¯æ˜Žï¼Œè¿™æœ€ç»ˆå¤åˆ¶äº† struct page 的大部分å—段,并且还需è¦æ›´æ–°è®¸å¤šå†…æ ¸ä»£ç è·¯å¾„æ‰ +能ç†è§£è¿™ç§æ–°çš„内å˜ç±»åž‹ã€‚ + +å¤§å¤šæ•°å†…æ ¸ä»£ç 路径从ä¸å°è¯•è®¿é—®é¡µé¢åŽé¢çš„内å˜ï¼Œè€Œåªå…³å¿ƒstruct page的内容。æ£å› 为如æ¤ï¼Œ +HMM 切æ¢åˆ°ç›´æŽ¥ä½¿ç”¨ struct page 用于设备内å˜ï¼Œè¿™ä½¿å¾—å¤§å¤šæ•°å†…æ ¸ä»£ç 路径ä¸çŸ¥é“差异。 +我们åªéœ€è¦ç¡®ä¿æ²¡æœ‰äººè¯•å›¾ä»Ž CPU ç«¯æ˜ å°„è¿™äº›é¡µé¢ã€‚ + +ç§»å…¥å’Œç§»å‡ºè®¾å¤‡å†…å˜ +================== + +由于 CPU æ— æ³•ç›´æŽ¥è®¿é—®è®¾å¤‡å†…å˜ï¼Œå› æ¤è®¾å¤‡é©±åŠ¨ç¨‹åºå¿…须使用硬件 DMA æˆ–è®¾å¤‡ç‰¹å®šçš„åŠ è½½/å˜ +储指令æ¥è¿ç§»æ•°æ®ã€‚migrate_vma_setup()ã€migrate_vma_pages() å’Œ +migrate_vma_finalize() 函数旨在使驱动程åºæ›´æ˜“于编写并集ä¸è·¨é©±åŠ¨ç¨‹åºçš„通用代ç 。 + +在将页é¢è¿ç§»åˆ°è®¾å¤‡ç§æœ‰å†…å˜ä¹‹å‰ï¼Œéœ€è¦åˆ›å»ºç‰¹æ®Šçš„设备ç§æœ‰ ``struct page`` 。这些将用 +作特殊的“交æ¢â€é¡µè¡¨æ¡ç›®ï¼Œä»¥ä¾¿ CPU 进程在å°è¯•è®¿é—®å·²è¿ç§»åˆ°è®¾å¤‡ä¸“用内å˜çš„页é¢æ—¶ä¼šå‘生异常。 + +这些å¯ä»¥é€šè¿‡ä»¥ä¸‹æ–¹å¼åˆ†é…和释放:: + + struct resource *res; + struct dev_pagemap pagemap; + + res = request_free_mem_region(&iomem_resource, /* number of bytes */, + "name of driver resource"); + pagemap.type = MEMORY_DEVICE_PRIVATE; + pagemap.range.start = res->start; + pagemap.range.end = res->end; + pagemap.nr_range = 1; + pagemap.ops = &device_devmem_ops; + memremap_pages(&pagemap, numa_node_id()); + + memunmap_pages(&pagemap); + release_mem_region(pagemap.range.start, range_len(&pagemap.range)); + +还有devm_request_free_mem_region(), devm_memremap_pages(), +devm_memunmap_pages() å’Œ devm_release_mem_region() 当资æºå¯ä»¥ç»‘定到 ``struct device``. + +整体è¿ç§»æ¥éª¤ç±»ä¼¼äºŽåœ¨ç³»ç»Ÿå†…å˜ä¸è¿ç§» NUMA 页é¢(see :ref:`Page migration <page_migration>`) , +但这些æ¥éª¤åˆ†ä¸ºè®¾å¤‡é©±åŠ¨ç¨‹åºç‰¹å®šä»£ç 和共享公共代ç : + +1. ``mmap_read_lock()`` + + 设备驱动程åºå¿…须将 ``struct vm_area_struct`` ä¼ é€’ç»™migrate_vma_setup(), + å› æ¤éœ€è¦åœ¨è¿ç§»æœŸé—´ä¿ç•™ mmap_read_lock() 或 mmap_write_lock()。 + +2. ``migrate_vma_setup(struct migrate_vma *args)`` + + 设备驱动åˆå§‹åŒ–了 ``struct migrate_vma`` çš„å—æ®µï¼Œå¹¶å°†è¯¥æŒ‡é’ˆä¼ é€’ç»™ + migrate_vma_setup()。``args->flags`` å—段是用æ¥è¿‡æ»¤å“ªäº›æºé¡µé¢åº”该被è¿ç§»ã€‚ + 例如,设置 ``MIGRATE_VMA_SELECT_SYSTEM`` å°†åªè¿ç§»ç³»ç»Ÿå†…å˜ï¼Œè®¾ç½® + ``MIGRATE_VMA_SELECT_DEVICE_PRIVATE`` å°†åªè¿ç§»é©»ç•™åœ¨è®¾å¤‡ç§æœ‰å†…å˜ä¸çš„页 + é¢ã€‚如果åŽè€…被设置, ``args->pgmap_owner`` å—段被用æ¥è¯†åˆ«é©±åŠ¨æ‰€æ‹¥æœ‰çš„设备 + ç§æœ‰é¡µã€‚这就é¿å…了试图è¿ç§»é©»ç•™åœ¨å…¶ä»–设备ä¸çš„设备ç§æœ‰é¡µã€‚ç›®å‰ï¼Œåªæœ‰åŒ¿åçš„ç§æœ‰VMA + 范围å¯ä»¥è¢«è¿ç§»åˆ°ç³»ç»Ÿå†…å˜å’Œè®¾å¤‡ç§æœ‰å†…å˜ã€‚ + + migrate_vma_setup()所åšçš„第一æ¥æ˜¯ç”¨ ``mmu_notifier_invalidate_range_start()`` + å’Œ ``mmu_notifier_invalidate_range_end()`` 调用æ¥é历设备周围的页表,使 + 其他设备的MMUæ— æ•ˆï¼Œä»¥ä¾¿åœ¨ ``args->src`` 数组ä¸å¡«å†™è¦è¿ç§»çš„PFN。 + ``invalidate_range_start()`` å›žè°ƒä¼ é€’ç»™ä¸€ä¸ª``struct mmu_notifier_range`` , + å…¶ ``event`` å—段设置为MMU_NOTIFY_MIGRATE, ``owner`` å—æ®µè®¾ç½®ä¸ºä¼ é€’ç»™ + migrate_vma_setup()çš„ ``args->pgmap_owner`` å—段。这å…è®¸è®¾å¤‡é©±åŠ¨è·³è¿‡æ— + 效化回调,åªæ— 效化那些实际æ£åœ¨è¿ç§»çš„设备ç§æœ‰MMUæ˜ å°„ã€‚è¿™ä¸€ç‚¹å°†åœ¨ä¸‹ä¸€èŠ‚è¯¦ç»†è§£é‡Šã€‚ + + + 在é历页表时,一个 ``pte_none()`` 或 ``is_zero_pfn()`` æ¡ç›®å¯¼è‡´ä¸€ä¸ªæœ‰æ•ˆ + çš„ “zero†PFN å˜å‚¨åœ¨ ``args->src`` 阵列ä¸ã€‚这让驱动分é…设备ç§æœ‰å†…å˜å¹¶æ¸… + 除它,而ä¸æ˜¯å¤åˆ¶ä¸€ä¸ªé›¶é¡µã€‚到系统内å˜æˆ–设备ç§æœ‰ç»“构页的有效PTEæ¡ç›®å°†è¢« + ``lock_page()``é”定,与LRU隔离(如果系统内å˜å’Œè®¾å¤‡ç§æœ‰é¡µä¸åœ¨LRU上),从进 + 程ä¸å–æ¶ˆæ˜ å°„ï¼Œå¹¶æ’入一个特殊的è¿ç§»PTEæ¥ä»£æ›¿åŽŸæ¥çš„PTE。 migrate_vma_setup() + 还清除了 ``args->dst`` 数组。 + +3. 设备驱动程åºåˆ†é…ç›®æ ‡é¡µé¢å¹¶å°†æºé¡µé¢å¤åˆ¶åˆ°ç›®æ ‡é¡µé¢ã€‚ + + 驱动程åºæ£€æŸ¥æ¯ä¸ª ``src`` æ¡ç›®ä»¥æŸ¥çœ‹è¯¥ ``MIGRATE_PFN_MIGRATE`` ä½æ˜¯å¦å·² + 设置并跳过未è¿ç§»çš„æ¡ç›®ã€‚设备驱动程åºè¿˜å¯ä»¥é€šè¿‡ä¸å¡«å……页é¢çš„ ``dst`` 数组æ¥é€‰ + 择跳过页é¢è¿ç§»ã€‚ + + 然åŽï¼Œé©±åŠ¨ç¨‹åºåˆ†é…一个设备ç§æœ‰ struct page 或一个系统内å˜é¡µï¼Œç”¨ ``lock_page()`` + é”定该页,并将 ``dst`` 数组æ¡ç›®å¡«å…¥:: + + dst[i] = migrate_pfn(page_to_pfn(dpage)); + + 现在驱动程åºçŸ¥é“这个页é¢æ£åœ¨è¢«è¿ç§»ï¼Œå®ƒå¯ä»¥ä½¿è®¾å¤‡ç§æœ‰ MMU æ˜ å°„æ— æ•ˆå¹¶å°†è®¾å¤‡ç§æœ‰ + 内å˜å¤åˆ¶åˆ°ç³»ç»Ÿå†…å˜æˆ–å¦ä¸€ä¸ªè®¾å¤‡ç§æœ‰é¡µé¢ã€‚ç”±äºŽæ ¸å¿ƒ Linux å†…æ ¸ä¼šå¤„ç† CPU 页表失 + æ•ˆï¼Œå› æ¤è®¾å¤‡é©±åŠ¨ç¨‹åºåªéœ€ä½¿å…¶è‡ªå·±çš„ MMU æ˜ å°„å¤±æ•ˆã€‚ + + 驱动程åºå¯ä»¥ä½¿ç”¨ ``migrate_pfn_to_page(src[i])`` æ¥èŽ·å–æºè®¾å¤‡çš„ + ``struct page`` é¢ï¼Œå¹¶å°†æºé¡µé¢å¤åˆ¶åˆ°ç›®æ ‡è®¾å¤‡ä¸Šï¼Œå¦‚果指针为 ``NULL`` ï¼Œæ„ + 味ç€æºé¡µé¢æ²¡æœ‰è¢«å¡«å……到系统内å˜ä¸ï¼Œåˆ™æ¸…é™¤ç›®æ ‡è®¾å¤‡çš„ç§æœ‰å†…å˜ã€‚ + +4. ``migrate_vma_pages()`` + + 这一æ¥æ˜¯å®žé™…“æ交â€è¿ç§»çš„地方。 + + 如果æºé¡µæ˜¯ ``pte_none()`` 或 ``is_zero_pfn()`` 页,这时新分é…çš„é¡µä¼šè¢«æ’ + 入到CPU的页表ä¸ã€‚如果一个CPU线程在åŒä¸€é¡µé¢ä¸Šå‘生异常,这å¯èƒ½ä¼šå¤±è´¥ã€‚然而,页 + 表被é”定,åªæœ‰ä¸€ä¸ªæ–°é¡µä¼šè¢«æ’入。如果它失去了竞争,设备驱动将看到 + ``MIGRATE_PFN_MIGRATE`` ä½è¢«æ¸…除。 + + 如果æºé¡µè¢«é”定ã€éš”离ç‰ï¼Œæº ``struct page`` ä¿¡æ¯çŽ°åœ¨è¢«å¤åˆ¶åˆ°ç›®æ ‡ + ``struct page`` ,最终完æˆCPU端的è¿ç§»ã€‚ + +5. 设备驱动为ä»åœ¨è¿ç§»çš„页é¢æ›´æ–°è®¾å¤‡MMU页表,回滚未è¿ç§»çš„页é¢ã€‚ + + 如果 ``src`` æ¡ç›®ä»ç„¶æœ‰ ``MIGRATE_PFN_MIGRATE`` ä½è¢«è®¾ç½®ï¼Œè®¾å¤‡é©±åŠ¨å¯ä»¥ + 更新设备MMU,如果 ``MIGRATE_PFN_WRITE`` ä½è¢«è®¾ç½®ï¼Œåˆ™è®¾ç½®å†™å¯ç”¨ä½ã€‚ + +6. ``migrate_vma_finalize()`` + + 这一æ¥ç”¨æ–°é¡µçš„页表项替æ¢ç‰¹æ®Šçš„è¿ç§»é¡µè¡¨é¡¹ï¼Œå¹¶é‡Šæ”¾å¯¹æºå’Œç›®çš„ ``struct page`` + 的引用。 + +7. ``mmap_read_unlock()`` + + 现在å¯ä»¥é‡Šæ”¾é”了。 + +独å 访问å˜å‚¨å™¨ +============== + +一些设备具有诸如原åPTEä½çš„功能,å¯ä»¥ç”¨æ¥å®žçŽ°å¯¹ç³»ç»Ÿå†…å˜çš„原å访问。为了支æŒå¯¹ä¸€ +个共享的虚拟内å˜é¡µçš„原åæ“ä½œï¼Œè¿™æ ·çš„è®¾å¤‡éœ€è¦å¯¹è¯¥é¡µçš„访问是排他的,而ä¸æ˜¯æ¥è‡ªCPU +的任何用户空间访问。 ``make_device_exclusive_range()`` 函数å¯ä»¥ç”¨æ¥ä½¿ä¸€ +个内å˜èŒƒå›´ä¸èƒ½ä»Žç”¨æˆ·ç©ºé—´è®¿é—®ã€‚ + +这将用特殊的交æ¢æ¡ç›®æ›¿æ¢ç»™å®šèŒƒå›´å†…çš„æ‰€æœ‰é¡µçš„æ˜ å°„ã€‚ä»»ä½•è¯•å›¾è®¿é—®äº¤æ¢æ¡ç›®çš„行为都会 +å¯¼è‡´ä¸€ä¸ªå¼‚å¸¸ï¼Œè¯¥å¼‚å¸¸ä¼šé€šè¿‡ç”¨åŽŸå§‹æ˜ å°„æ›¿æ¢è¯¥æ¡ç›®è€Œå¾—到æ¢å¤ã€‚驱动程åºä¼šè¢«é€šçŸ¥æ˜ å°„å·² +ç»è¢«MMU通知器改å˜ï¼Œä¹‹åŽå®ƒå°†ä¸å†æœ‰å¯¹è¯¥é¡µçš„独å 访问。独å 访问被ä¿è¯æŒç»åˆ°é©±åŠ¨ç¨‹åº +放弃页é¢é”和页é¢å¼•ç”¨ä¸ºæ¢ï¼Œè¿™æ—¶é¡µé¢ä¸Šçš„任何CPU异常都å¯ä»¥æŒ‰æ‰€è¿°è¿›è¡Œã€‚ + +å†…å˜ cgroup (memcg) å’Œ rss 统计 +=============================== + +ç›®å‰ï¼Œè®¾å¤‡å†…å˜è¢«è§†ä¸º rss 计数器ä¸çš„任何常规页é¢ï¼ˆå¦‚果设备页é¢ç”¨äºŽåŒ¿å,则为匿å, +如果设备页é¢ç”¨äºŽæ–‡ä»¶æ”¯æŒé¡µé¢ï¼Œåˆ™ä¸ºæ–‡ä»¶ï¼Œå¦‚果设备页é¢ç”¨äºŽå…±äº«å†…å˜ï¼Œåˆ™ä¸º shmem)。 +这是为了ä¿æŒçŽ°æœ‰åº”用程åºçš„æ•…æ„选择,这些应用程åºå¯èƒ½åœ¨ä¸çŸ¥æƒ…的情况下开始使用设备 +内å˜ï¼Œè¿è¡Œä¸å—å½±å“。 + +一个缺点是 OOM æ€æ‰‹å¯èƒ½ä¼šæ€æ»ä½¿ç”¨å¤§é‡è®¾å¤‡å†…å˜è€Œä¸æ˜¯å¤§é‡å¸¸è§„系统内å˜çš„应用程åºï¼Œ +å› æ¤ä¸ä¼šé‡Šæ”¾å¤ªå¤šç³»ç»Ÿå†…å˜ã€‚在决定以ä¸åŒæ–¹å¼è®¡ç®—设备内å˜ä¹‹å‰ï¼Œæˆ‘们希望收集更多关 +于应用程åºå’Œç³»ç»Ÿåœ¨å˜åœ¨è®¾å¤‡å†…å˜çš„情况下在内å˜åŽ‹åŠ›ä¸‹å¦‚何å应的实际ç»éªŒã€‚ + +å¯¹å†…å˜ cgroup åšå‡ºäº†ç›¸åŒçš„决定。设备内å˜é¡µé¢æ ¹æ®ç›¸åŒçš„å†…å˜ cgroup 计算,常规 +页é¢å°†è¢«è®¡ç®—在内。这确实简化了进出设备内å˜çš„è¿ç§»ã€‚这也æ„味ç€ä»Žè®¾å¤‡å†…å˜è¿ç§»å›žå¸¸è§„ +内å˜ä¸ä¼šå¤±è´¥ï¼Œå› ä¸ºå®ƒä¼šè¶…è¿‡å†…å˜ cgroup é™åˆ¶ã€‚一旦我们对设备内å˜çš„使用方å¼åŠå…¶å¯¹ +内å˜èµ„æºæŽ§åˆ¶çš„å½±å“有了更多的了解,我们å¯èƒ½ä¼šåœ¨åŽé¢é‡æ–°è€ƒè™‘这个选择。 + +请注æ„,设备内å˜æ°¸è¿œä¸èƒ½ç”±è®¾å¤‡é©±åŠ¨ç¨‹åºæˆ–通过 GUP å›ºå®šï¼Œå› æ¤æ¤ç±»å†…å˜åœ¨è¿›ç¨‹é€€å‡ºæ—¶ +总是被释放的。或者在共享内å˜æˆ–文件支æŒå†…å˜çš„æƒ…å†µä¸‹ï¼Œå½“åˆ é™¤æœ€åŽä¸€ä¸ªå¼•ç”¨æ—¶ã€‚ diff --git a/Documentation/translations/zh_CN/vm/hugetlbfs_reserv.rst b/Documentation/translations/zh_CN/vm/hugetlbfs_reserv.rst new file mode 100644 index 000000000000..c6d471ce2131 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/hugetlbfs_reserv.rst @@ -0,0 +1,436 @@ +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/vm/hugetlbfs_reserv.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + +============== +Hugetlbfs 预留 +============== + +概述 +==== + +:ref:`hugetlbpage` ä¸æ述的巨页通常是预先分é…给应用程åºä½¿ç”¨çš„。如果VMA指 +示è¦ä½¿ç”¨å·¨é¡µï¼Œè¿™äº›å·¨é¡µä¼šåœ¨ç¼ºé¡µå¼‚常时被实例化到任务的地å€ç©ºé—´ã€‚如果在缺页异常 +时没有巨页å˜åœ¨ï¼Œä»»åŠ¡å°±ä¼šè¢«å‘é€ä¸€ä¸ªSIGBUS,并ç»å¸¸ä¸é«˜å…´åœ°æ»åŽ»ã€‚åœ¨åŠ å…¥å·¨é¡µæ”¯ +æŒåŽä¸ä¹…,人们决定,在mmap()时检测巨页的çŸç¼ºæƒ…况会更好。这个想法是,如果 +没有足够的巨页æ¥è¦†ç›–æ˜ å°„ï¼Œmmap()将失败。这首先是在mmap()时在代ç ä¸åšä¸€ä¸ª +简å•çš„检查,以确定是å¦æœ‰è¶³å¤Ÿçš„空闲巨页æ¥è¦†ç›–æ˜ å°„ã€‚å°±åƒå†…æ ¸ä¸çš„大多数东西一 +æ ·ï¼Œä»£ç éšç€æ—¶é—´çš„推移而ä¸æ–å‘展。然而,基本的想法是在mmap()æ—¶ “预留†+巨页,以确ä¿å·¨é¡µå¯ä»¥ç”¨äºŽè¯¥æ˜ å°„ä¸çš„缺页异常。下é¢çš„æ述试图æ述在v4.10å†…æ ¸ +ä¸æ˜¯å¦‚何进行巨页预留处ç†çš„。 + + +读者 +==== +这个æ述主è¦æ˜¯é’ˆå¯¹æ£åœ¨ä¿®æ”¹hugetlbfs代ç çš„å†…æ ¸å¼€å‘者。 + + +æ•°æ®ç»“æž„ +======== + +resv_huge_pages + 这是一个全局的(per-hstate)预留的巨页的计数。预留的巨页åªå¯¹é¢„留它们的任 + 务å¯ç”¨ã€‚å› æ¤ï¼Œä¸€èˆ¬å¯ç”¨çš„巨页的数é‡è¢«è®¡ç®—为(``free_huge_pages - resv_huge_pages``)。 +Reserve Map + é¢„ç•™æ˜ å°„ç”±ä»¥ä¸‹ç»“æž„ä½“æè¿°:: + + struct resv_map { + struct kref refs; + spinlock_t lock; + struct list_head regions; + long adds_in_progress; + struct list_head region_cache; + long region_cache_count; + }; + + 系统ä¸æ¯ä¸ªå·¨é¡µæ˜ å°„éƒ½æœ‰ä¸€ä¸ªé¢„ç•™æ˜ å°„ã€‚resv_mapä¸çš„regions列表æè¿°äº†æ˜ å°„ä¸çš„ + 区域。一个区域被æ述为:: + + struct file_region { + struct list_head link; + long from; + long to; + }; + + file_region结构体的 ‘from’ å’Œ ‘to’ å—æ®µæ˜¯è¿›å…¥æ˜ å°„çš„å·¨é¡µç´¢å¼•ã€‚æ ¹æ®æ˜ 射的类型,在 + reserv_map ä¸çš„一个区域å¯èƒ½è¡¨ç¤ºè¯¥èŒƒå›´å˜åœ¨é¢„留,或预留ä¸å˜åœ¨ã€‚ +Flags for MAP_PRIVATE Reservations + 这些被å˜å‚¨åœ¨é¢„ç•™çš„æ˜ å°„æŒ‡é’ˆçš„åº•éƒ¨ã€‚ + + ``#define HPAGE_RESV_OWNER (1UL << 0)`` + è¡¨ç¤ºè¯¥ä»»åŠ¡æ˜¯ä¸Žè¯¥æ˜ å°„ç›¸å…³çš„é¢„ç•™çš„æ‰€æœ‰è€…ã€‚ + ``#define HPAGE_RESV_UNMAPPED (1UL << 1)`` + 表示最åˆæ˜ å°„æ¤èŒƒå›´ï¼ˆå¹¶åˆ›å»ºå‚¨å¤‡ï¼‰çš„任务由于COW失败而从该任务(å任务)ä¸å–æ¶ˆæ˜ + 射了一个页é¢ã€‚ +Page Flags + PagePrivate页é¢æ ‡å¿—是用æ¥æŒ‡ç¤ºåœ¨é‡Šæ”¾å·¨é¡µæ—¶å¿…é¡»æ¢å¤å·¨é¡µçš„预留。更多细节将在 + “释放巨页†一节ä¸è®¨è®ºã€‚ + + +é¢„ç•™æ˜ å°„ä½ç½®ï¼ˆç§æœ‰æˆ–共享) +========================== + +ä¸€ä¸ªå·¨é¡µæ˜ å°„æˆ–æ®µè¦ä¹ˆæ˜¯ç§æœ‰çš„,è¦ä¹ˆæ˜¯å…±äº«çš„。如果是ç§æœ‰çš„,它通常åªå¯¹ä¸€ä¸ªåœ°å€ç©ºé—´ +(任务)å¯ç”¨ã€‚如果是共享的,它å¯ä»¥è¢«æ˜ 射到多个地å€ç©ºé—´ï¼ˆä»»åŠ¡ï¼‰ã€‚对于这两ç§ç±»åž‹çš„æ˜ å°„ï¼Œ +é¢„ç•™æ˜ å°„çš„ä½ç½®å’Œè¯ä¹‰æ˜¯æ˜Žæ˜¾ä¸åŒçš„。ä½ç½®çš„差异是: + +- 对于ç§æœ‰æ˜ å°„ï¼Œé¢„ç•™æ˜ å°„æŒ‚åœ¨VMA结构体上。具体æ¥è¯´ï¼Œå°±æ˜¯vma->vm_private_dataã€‚è¿™ä¸ªä¿ + ç•™æ˜ å°„æ˜¯åœ¨åˆ›å»ºæ˜ å°„ï¼ˆmmap(MAP_PRIVATE))时创建的。 +- å¯¹äºŽå…±äº«æ˜ å°„ï¼Œé¢„ç•™æ˜ å°„æŒ‚åœ¨inode上。具体æ¥è¯´ï¼Œå°±æ˜¯inode->i_mapping->private_data。 + ç”±äºŽå…±äº«æ˜ å°„æ€»æ˜¯ç”±hugetlbfs文件系统ä¸çš„文件支æŒï¼Œhugetlbfs代ç ç¡®ä¿æ¯ä¸ªèŠ‚点包å«ä¸€ä¸ªé¢„ + ç•™æ˜ å°„ã€‚å› æ¤ï¼Œé¢„ç•™æ˜ å°„åœ¨åˆ›å»ºèŠ‚ç‚¹æ—¶è¢«åˆ†é…。 + + +创建预留 +======== +当创建一个巨大的有页é¢æ”¯æŒçš„共享内å˜æ®µï¼ˆshmget(SHM_HUGETLB))或通过mmap(MAP_HUGETLB) +åˆ›å»ºä¸€ä¸ªæ˜ å°„æ—¶ï¼Œå°±ä¼šåˆ›å»ºé¢„ç•™ã€‚è¿™äº›æ“作会导致对函数hugetlb_reserve_pages()的调用:: + + int hugetlb_reserve_pages(struct inode *inode, + long from, long to, + struct vm_area_struct *vma, + vm_flags_t vm_flags) + +hugetlb_reserve_pages()åšçš„第一件事是检查在调用shmget()或mmap()时是å¦æŒ‡å®šäº†NORESERVE +æ ‡å¿—ã€‚å¦‚æžœæŒ‡å®šäº†NORESERVE,那么这个函数立å³è¿”å›žï¼Œå› ä¸ºä¸éœ€è¦é¢„留。 + +å‚æ•°'from'å’Œ'to'æ˜¯æ˜ å°„æˆ–åŸºç¡€æ–‡ä»¶çš„å·¨é¡µç´¢å¼•ã€‚å¯¹äºŽshmget(),'from'总是0,'to'对应于段/æ˜ å°„ +的长度。对于mmap(),offsetå‚æ•°å¯ä»¥ç”¨æ¥æŒ‡å®šè¿›å…¥åº•å±‚文件的å移é‡ã€‚在这ç§æƒ…况下,'from'å’Œ'to' +å‚æ•°å·²ç»è¢«è¿™ä¸ªå移é‡æ‰€è°ƒæ•´ã€‚ + +PRIVATEå’ŒSHAREDæ˜ å°„ä¹‹é—´çš„ä¸€ä¸ªå¾ˆå¤§çš„åŒºåˆ«æ˜¯é¢„ç•™åœ¨é¢„ç•™æ˜ å°„ä¸çš„表示方å¼ã€‚ + +- å¯¹äºŽå…±äº«æ˜ å°„ï¼Œé¢„ç•™æ˜ å°„ä¸çš„æ¡ç›®è¡¨ç¤ºå¯¹åº”页é¢çš„预留å˜åœ¨æˆ–曾ç»å˜åœ¨ã€‚å½“é¢„ç•™è¢«æ¶ˆè€—æ—¶ï¼Œé¢„ç•™æ˜ å°„ä¸è¢« + 修改。 +- 对于ç§æœ‰æ˜ å°„ï¼Œé¢„ç•™æ˜ å°„ä¸æ²¡æœ‰æ¡ç›®è¡¨ç¤ºç›¸åº”页é¢å˜åœ¨é¢„留。éšç€é¢„留被消耗,æ¡ç›®è¢«æ·»åŠ åˆ°é¢„ç•™æ˜ å°„ä¸ã€‚ + å› æ¤ï¼Œé¢„ç•™æ˜ å°„ä¹Ÿå¯ç”¨äºŽç¡®å®šå“ªäº›é¢„留已被消耗。 + +对于ç§æœ‰æ˜ 射,hugetlb_reserve_pages()åˆ›å»ºé¢„ç•™æ˜ å°„å¹¶å°†å…¶æŒ‚åœ¨VMA结构体上。æ¤å¤–, +HPAGE_RESV_OWNERæ ‡å¿—è¢«è®¾ç½®ï¼Œä»¥è¡¨æ˜Žè¯¥VMA拥有预留。 + +é¢„ç•™æ˜ å°„è¢«æŸ¥é˜…ä»¥ç¡®å®šå½“å‰æ˜ å°„/段需è¦å¤šå°‘巨页预留。对于ç§æœ‰æ˜ 射,这始终是一个值(to - from)。 +ç„¶è€Œï¼Œå¯¹äºŽå…±äº«æ˜ å°„æ¥è¯´ï¼Œä¸€äº›é¢„ç•™å¯èƒ½å·²ç»å˜åœ¨äºŽ(to - from)的范围内。关于如何实现这一点的细节, +请å‚è§ :ref:`é¢„ç•™æ˜ å°„çš„ä¿®æ”¹ <resv_map_modifications>` 一节。 + +è¯¥æ˜ å°„å¯èƒ½ä¸Žä¸€ä¸ªåæ± ï¼ˆsubpool)相关è”ã€‚å¦‚æžœæ˜¯è¿™æ ·ï¼Œå°†æŸ¥è¯¢åæ± ä»¥ç¡®ä¿æœ‰è¶³å¤Ÿçš„ç©ºé—´ç”¨äºŽæ˜ å°„ã€‚åæ± +有å¯èƒ½å·²ç»é¢„留了å¯ç”¨äºŽæ˜ 射的预留空间。更多细节请å‚è§ :ref: `åæ± é¢„ç•™ <sub_pool_resv>` +一节。 + +åœ¨å’¨è¯¢äº†é¢„ç•™æ˜ å°„å’Œåæ± ä¹‹åŽï¼Œå°±çŸ¥é“了需è¦çš„新预留数é‡ã€‚hugetlb_acct_memory()函数被调用以检查 +并获å–所è¦æ±‚的预留数é‡ã€‚hugetlb_acct_memory()调用到å¯èƒ½åˆ†é…和调整剩余页数的函数。然而,在这 +些函数ä¸ï¼Œä»£ç åªæ˜¯æ£€æŸ¥ä»¥ç¡®ä¿æœ‰è¶³å¤Ÿçš„空闲的巨页æ¥å®¹çº³é¢„留。如果有的è¯ï¼Œå…¨å±€é¢„留计数resv_huge_pages +会被调整,如下所示:: + + if (resv_needed <= (resv_huge_pages - free_huge_pages)) + resv_huge_pages += resv_needed; + +注æ„,在检查和调整这些计数器时,全局é”hugetlb_lock会被预留。 + +如果有足够的空闲的巨页,并且全局计数resv_huge_pagesè¢«è°ƒæ•´ï¼Œé‚£ä¹ˆä¸Žæ˜ å°„ç›¸å…³çš„é¢„ç•™æ˜ å°„è¢«ä¿®æ”¹ä»¥ +åæ˜ é¢„ç•™ã€‚åœ¨å…±äº«æ˜ å°„çš„æƒ…å†µä¸‹ï¼Œå°†å˜åœ¨ä¸€ä¸ªfile_region,包括'from'-'to'范围。对于ç§æœ‰æ˜ 射, +ä¸å¯¹é¢„ç•™æ˜ å°„è¿›è¡Œä¿®æ”¹ï¼Œå› ä¸ºæ²¡æœ‰æ¡ç›®è¡¨ç¤ºå˜åœ¨é¢„留。 + +如果hugetlb_reserve_pages()æˆåŠŸï¼Œå…¨å±€é¢„ç•™æ•°å’Œä¸Žæ˜ å°„ç›¸å…³çš„é¢„ç•™æ˜ å°„å°†æ ¹æ®éœ€è¦è¢«ä¿®æ”¹ï¼Œä»¥ç¡®ä¿ +在'from'-'to'范围内å˜åœ¨é¢„留。 + +消耗预留/分é…一个巨页 +=========================== + +å½“ä¸Žé¢„ç•™ç›¸å…³çš„å·¨é¡µåœ¨ç›¸åº”çš„æ˜ å°„ä¸è¢«åˆ†é…和实例化时,预留就被消耗了。该分é…是在函数alloc_huge_page() +ä¸è¿›è¡Œçš„:: + + struct page *alloc_huge_page(struct vm_area_struct *vma, + unsigned long addr, int avoid_reserve) + +alloc_huge_pageè¢«ä¼ é€’ç»™ä¸€ä¸ªVMA指针和一个虚拟地å€ï¼Œå› æ¤å®ƒå¯ä»¥æŸ¥é˜…é¢„ç•™æ˜ å°„ä»¥ç¡®å®šæ˜¯å¦å˜åœ¨é¢„留。 +æ¤å¤–,alloc_huge_page需è¦ä¸€ä¸ªå‚æ•°avoid_reserve,该å‚数表示å³ä½¿çœ‹èµ·æ¥å·²ç»ä¸ºæŒ‡å®šçš„地å€é¢„留了 +预留,也ä¸åº”该使用预留。avoid_reserveå‚数最常被用于写时拷è´å’Œé¡µé¢è¿ç§»çš„情况下,å³çŽ°æœ‰é¡µé¢çš„é¢ +外拷è´è¢«åˆ†é…。 + + +调用辅助函数vma_needs_reservation()æ¥ç¡®å®šæ˜¯å¦å˜åœ¨å¯¹æ˜ å°„(vma)ä¸åœ°å€çš„预留。关于这个函数的详 +细内容,请å‚è§ :ref:`é¢„ç•™æ˜ å°„å¸®åŠ©å‡½æ•° <resv_map_helpers>` 一节。从 +vma_needs_reservation()返回的值通常为0或1。如果该地å€å˜åœ¨é¢„留,则为0,如果ä¸å˜åœ¨é¢„留,则为1。 +如果ä¸å˜åœ¨é¢„ç•™ï¼Œå¹¶ä¸”æœ‰ä¸€ä¸ªä¸Žæ˜ å°„ç›¸å…³è”çš„åæ± ï¼Œåˆ™æŸ¥è¯¢åæ± ä»¥ç¡®å®šå®ƒæ˜¯å¦åŒ…å«é¢„留。如果åæ± åŒ…å«é¢„留, +则å¯å°†å…¶ä¸ä¸€ä¸ªç”¨äºŽè¯¥åˆ†é…。然而,在任何情况下,avoid_reserveå‚数都会优先考虑为分é…使用预留。在 +确定预留是å¦å˜åœ¨å¹¶å¯ç”¨äºŽåˆ†é…åŽï¼Œè°ƒç”¨dequeue_huge_page_vma()函数。这个函数需è¦ä¸¤ä¸ªä¸Žé¢„留有关 +çš„å‚数: + +- avoid_reserveï¼Œè¿™æ˜¯ä¼ é€’ç»™alloc_huge_page()çš„åŒä¸€ä¸ªå€¼/å‚数。 +- chg,尽管这个å‚数的类型是long,但åªæœ‰0或1çš„å€¼è¢«ä¼ é€’ç»™dequeue_huge_page_vma。如果该值为0, + 则表明å˜åœ¨é¢„留(关于å¯èƒ½çš„问题,请å‚è§ â€œé¢„ç•™å’Œå†…å˜ç–略†一节)。如果值 + 为1,则表示ä¸å˜åœ¨é¢„留,如果å¯èƒ½çš„è¯ï¼Œå¿…é¡»ä»Žå…¨å±€ç©ºé—²æ± ä¸å–出该页。 + +与VMA的内å˜ç–略相关的空闲列表被æœç´¢åˆ°ä¸€ä¸ªç©ºé—²é¡µã€‚如果找到了一个页é¢ï¼Œå½“该页é¢ä»Žç©ºé—²åˆ—表ä¸ç§»é™¤æ—¶ï¼Œ +free_huge_pages的值被递å‡ã€‚如果有一个与该页相关的预留,将进行以下调整:: + + SetPagePrivate(page); /* 表示分é…这个页é¢æ¶ˆè€—了一个预留, + * 如果é‡åˆ°é”™è¯¯ï¼Œä»¥è‡³äºŽå¿…须释放这个页é¢ï¼Œé¢„留将被 + * æ¢å¤ã€‚ */ + resv_huge_pages--; /* å‡å°‘全局预留计数 */ + +注æ„,如果找ä¸åˆ°æ»¡è¶³VMA内å˜ç–略的巨页,将å°è¯•ä½¿ç”¨ä¼™ä¼´åˆ†é…器分é…一个。这就带æ¥äº†è¶…出预留范围 +的剩余巨页和超é¢åˆ†é…的问题。å³ä½¿åˆ†é…了一个多余的页é¢ï¼Œä¹Ÿä¼šè¿›è¡Œä¸Žä¸Šé¢ä¸€æ ·çš„基于预留的调整: +SetPagePrivate(page) å’Œ resv_huge_pages--. + +在获得一个新的巨页åŽï¼Œ(page)->private被设置为与该页é¢ç›¸å…³çš„åæ± çš„å€¼ï¼Œå¦‚æžœå®ƒå˜åœ¨çš„è¯ã€‚当页 +é¢è¢«é‡Šæ”¾æ—¶ï¼Œè¿™å°†è¢«ç”¨äºŽåæ± çš„è®¡æ•°ã€‚ + +然åŽè°ƒç”¨å‡½æ•°vma_commit_reservation()ï¼Œæ ¹æ®é¢„ç•™çš„æ¶ˆè€—æƒ…å†µè°ƒæ•´é¢„ç•™æ˜ å°„ã€‚ä¸€èˆ¬æ¥è¯´ï¼Œè¿™æ¶‰åŠ +到确ä¿é¡µé¢åœ¨åŒºåŸŸæ˜ å°„çš„file_region结构体ä¸è¢«è¡¨ç¤ºã€‚对于预留å˜åœ¨çš„å…±äº«æ˜ å°„ï¼Œé¢„ç•™æ˜ å°„ä¸çš„æ¡ç›® +å·²ç»å˜åœ¨ï¼Œæ‰€ä»¥ä¸åšä»»ä½•æ”¹å˜ã€‚ç„¶è€Œï¼Œå¦‚æžœå…±äº«æ˜ å°„ä¸æ²¡æœ‰é¢„留,或者这是一个ç§æœ‰æ˜ 射,则必须创建一 +个新的æ¡ç›®ã€‚ + +注æ„,如果找ä¸åˆ°æ»¡è¶³VMA内å˜ç–略的巨页,将å°è¯•ä½¿ç”¨ä¼™ä¼´åˆ†é…器分é…一个。这就带æ¥äº†è¶…出预留范围 +的剩余巨页和过度分é…的问题。å³ä½¿åˆ†é…了一个多余的页é¢ï¼Œä¹Ÿä¼šè¿›è¡Œä¸Žä¸Šé¢ä¸€æ ·çš„基于预留的调整。 +SetPagePrivate(page)å’Œresv_huge_pages-。 + +在获得一个新的巨页åŽï¼Œ(page)->private被设置为与该页é¢ç›¸å…³çš„åæ± çš„å€¼ï¼Œå¦‚æžœå®ƒå˜åœ¨çš„è¯ã€‚当页 +é¢è¢«é‡Šæ”¾æ—¶ï¼Œè¿™å°†è¢«ç”¨äºŽåæ± çš„è®¡æ•°ã€‚ + +然åŽè°ƒç”¨å‡½æ•°vma_commit_reservation()ï¼Œæ ¹æ®é¢„ç•™çš„æ¶ˆè€—æƒ…å†µè°ƒæ•´é¢„ç•™æ˜ å°„ã€‚ä¸€èˆ¬æ¥è¯´ï¼Œè¿™æ¶‰åŠ +到确ä¿é¡µé¢åœ¨åŒºåŸŸæ˜ å°„çš„file_region结构体ä¸è¢«è¡¨ç¤ºã€‚对于预留å˜åœ¨çš„å…±äº«æ˜ å°„ï¼Œé¢„ç•™æ˜ å°„ä¸çš„æ¡ç›® +å·²ç»å˜åœ¨ï¼Œæ‰€ä»¥ä¸åšä»»ä½•æ”¹å˜ã€‚ç„¶è€Œï¼Œå¦‚æžœå…±äº«æ˜ å°„ä¸æ²¡æœ‰é¢„留,或者这是一个ç§æœ‰æ˜ 射,则必须创建 +一个新的æ¡ç›®ã€‚ + +在alloc_huge_page()开始调用vma_needs_reservation()和页é¢åˆ†é…åŽè°ƒç”¨ +vma_commit_reservation()ä¹‹é—´ï¼Œé¢„ç•™æ˜ å°„æœ‰å¯èƒ½è¢«æ”¹å˜ã€‚如果hugetlb_reserve_pages在共 +äº«æ˜ å°„ä¸ä¸ºåŒä¸€é¡µé¢è¢«è°ƒç”¨ï¼Œè¿™å°†æ˜¯å¯èƒ½çš„。在这ç§æƒ…况下,预留计数和åæ± ç©ºé—²é¡µè®¡æ•°ä¼šæœ‰ä¸€ä¸ªå差。 +è¿™ç§ç½•è§çš„情况å¯ä»¥é€šè¿‡æ¯”较vma_needs_reservationå’Œvma_commit_reservationçš„è¿”å›žå€¼æ¥ +识别。如果检测到这ç§ç«žäº‰ï¼Œåæ± å’Œå…¨å±€é¢„ç•™è®¡æ•°å°†è¢«è°ƒæ•´ä»¥è¿›è¡Œè¡¥å¿ã€‚关于这些函数的更多信æ¯ï¼Œè¯· +å‚è§ :ref:`é¢„ç•™æ˜ å°„å¸®åŠ©å‡½æ•° <resv_map_helpers>` 一节。 + + +实例化巨页 +========== + +在巨页分é…之åŽï¼Œé¡µé¢é€šå¸¸è¢«æ·»åŠ 到分é…任务的页表ä¸ã€‚在æ¤ä¹‹å‰ï¼Œå…±äº«æ˜ å°„ä¸çš„页é¢è¢«æ·»åŠ 到页é¢ç¼“ +å˜ä¸ï¼Œç§æœ‰æ˜ å°„ä¸çš„页é¢è¢«æ·»åŠ 到匿ååå‘æ˜ å°„ä¸ã€‚在这两ç§æƒ…况下,PagePrivateæ ‡å¿—è¢«æ¸…é™¤ã€‚å› æ¤ï¼Œ +当一个已ç»å®žä¾‹åŒ–的巨页被释放时,ä¸ä¼šå¯¹å…¨å±€é¢„留计数(resv_huge_pages)进行调整。 + + +释放巨页 +======== + +巨页释放是由函数free_huge_page()执行的。这个函数是hugetlbfså¤åˆé¡µçš„æžæž„å™¨ã€‚å› æ¤ï¼Œå®ƒåªä¼ +递一个指å‘页é¢ç»“构体的指针。当一个巨页被释放时,å¯èƒ½éœ€è¦è¿›è¡Œé¢„留计算。如果该页与包å«ä¿ +留的åæ± ç›¸å…³è”,或者该页在错误路径上被释放,必须æ¢å¤å…¨å±€é¢„留计数,就会出现这ç§æƒ…况。 + +page->privateå—段指å‘与该页相关的任何åæ± ã€‚å¦‚æžœPagePrivateæ ‡å¿—è¢«è®¾ç½®ï¼Œå®ƒè¡¨æ˜Žå…¨å±€é¢„ç•™è®¡æ•° +åº”è¯¥è¢«è°ƒæ•´ï¼ˆå…³äºŽå¦‚ä½•è®¾ç½®è¿™äº›æ ‡å¿—çš„ä¿¡æ¯ï¼Œè¯·å‚è§ +:ref: `消耗预留/分é…一个巨页 <consume_resv>` )。 + + +该函数首先调用hugepage_subpool_put_pages()æ¥å¤„ç†è¯¥é¡µã€‚如果这个函数返回一个0的值(ä¸ç‰äºŽ +ä¼ é€’çš„1的值),它表明预留与åæ± ç›¸å…³è”,这个新释放的页é¢å¿…须被用æ¥ä¿æŒåæ± é¢„ç•™çš„æ•°é‡è¶…过最å°å€¼ã€‚ +å› æ¤ï¼Œåœ¨è¿™ç§æƒ…况下,全局resv_huge_pages计数器被递增。 + +如果页é¢ä¸è®¾ç½®äº†PagePrivateæ ‡å¿—ï¼Œé‚£ä¹ˆå…¨å±€resv_huge_pages计数器将永远被递增。 + +åæ± é¢„ç•™ +======== + +有一个结构体hstate与æ¯ä¸ªå·¨é¡µå°ºå¯¸ç›¸å…³è”。hstate跟踪所有指定大å°çš„巨页。一个åæ± ä»£è¡¨ä¸€ +个hstateä¸çš„页é¢å集,它与一个已挂载的hugetlbfs文件系统相关 + +当一个hugetlbfs文件系统被挂载时,å¯ä»¥æŒ‡å®šmin_size选项,它表示文件系统所需的最å°çš„巨页数é‡ã€‚ +如果指定了这个选项,与min_size相对应的巨页的数é‡å°†è¢«é¢„留给文件系统使用。这个数å—在结构体 +hugepage_subpoolçš„min_hpageså—段ä¸è¢«è·Ÿè¸ªã€‚在挂载时,hugetlb_acct_memory(min_hpages) +被调用以预留指定数é‡çš„巨页。如果它们ä¸èƒ½è¢«é¢„留,挂载就会失败。 + +当从åæ± ä¸èŽ·å–或释放页é¢æ—¶ï¼Œä¼šè°ƒç”¨hugepage_subpool_get/put_pages()函数。 +hugepage_subpool_get/put_pagesè¢«ä¼ é€’ç»™å·¨é¡µæ•°é‡ï¼Œä»¥æ¤æ¥è°ƒæ•´åæ± çš„ “已用页é¢â€ 计数 +(get为下é™ï¼Œput为上å‡ï¼‰ã€‚通常情况下,如果åæ± ä¸æ²¡æœ‰è¶³å¤Ÿçš„页é¢ï¼Œå®ƒä»¬ä¼šè¿”å›žä¸Žä¼ é€’çš„ç›¸åŒçš„值或 +一个错误。 + +然而,如果预留与åæ± ç›¸å…³è”,å¯èƒ½ä¼šè¿”回一个å°äºŽä¼ 递值的返回值。这个返回值表示必须进行的é¢å¤–全局 +æ± è°ƒæ•´çš„æ•°é‡ã€‚例如,å‡è®¾ä¸€ä¸ªåæ± åŒ…å«3个预留的巨页,有人è¦æ±‚5个。与åæ± ç›¸å…³çš„3个预留页å¯ä»¥ç”¨æ¥ +æ»¡è¶³éƒ¨åˆ†è¯·æ±‚ã€‚ä½†æ˜¯ï¼Œå¿…é¡»ä»Žå…¨å±€æ± ä¸èŽ·å¾—2个页é¢ã€‚为了å‘调用者转达这一信æ¯ï¼Œå°†è¿”回值2。然åŽï¼Œè°ƒç”¨ +者è¦è´Ÿè´£ä»Žå…¨å±€æ± ä¸èŽ·å–å¦å¤–两个页é¢ã€‚ + + +COW和预留 +========== + +ç”±äºŽå…±äº«æ˜ å°„éƒ½æŒ‡å‘并使用相åŒçš„底层页é¢ï¼ŒCOW最大的预留问题是ç§æœ‰æ˜ 射。在这ç§æƒ…å†µä¸‹ï¼Œä¸¤ä¸ªä»»åŠ¡å¯ +以指å‘åŒä¸€ä¸ªå…ˆå‰åˆ†é…的页é¢ã€‚一个任务试图写到该页,所以必须分é…一个新的页,以便æ¯ä¸ªä»»åŠ¡éƒ½æŒ‡å‘它 +自己的页。 + +当该页最åˆè¢«åˆ†é…时,该页的预留被消耗了。当由于COW而试图分é…一个新的页é¢æ—¶ï¼Œæœ‰å¯èƒ½æ²¡æœ‰ç©ºé—²çš„å·¨ +页,分é…会失败。 + +当最åˆåˆ›å»ºç§æœ‰æ˜ å°„æ—¶ï¼Œé€šè¿‡è®¾ç½®æ‰€æœ‰è€…çš„é¢„ç•™æ˜ å°„æŒ‡é’ˆä¸çš„HPAGE_RESV_OWNERä½æ¥æ ‡è®°æ˜ 射的所有者。 +ç”±äºŽæ‰€æœ‰è€…åˆ›å»ºäº†æ˜ å°„ï¼Œæ‰€æœ‰è€…æ‹¥æœ‰ä¸Žæ˜ å°„ç›¸å…³çš„æ‰€æœ‰é¢„ç•™ã€‚å› æ¤ï¼Œå½“一个写异常å‘生并且没有å¯ç”¨çš„é¡µé¢ +时,对预留的所有者和éžæ‰€æœ‰è€…采å–ä¸åŒçš„行动。 + +在å‘生异常的任务ä¸æ˜¯æ‰€æœ‰è€…的情况下,异常将失败,该任务通常会收到一个SIGBUS。 + +如果所有者是å‘生异常的任务,我们希望它能够æˆåŠŸï¼Œå› 为它拥有原始的预留。为了达到这个目的,该页被 +从éžæ‰€æœ‰è€…任务ä¸è§£æ˜ 射出æ¥ã€‚è¿™æ ·ä¸€æ¥ï¼Œå”¯ä¸€çš„引用就是æ¥è‡ªæ‹¥æœ‰è€…的任务。æ¤å¤–,HPAGE_RESV_UNMAPPED +ä½è¢«è®¾ç½®åœ¨éžæ‹¥æœ‰ä»»åŠ¡çš„é¢„ç•™æ˜ å°„æŒ‡é’ˆä¸ã€‚如果éžæ‹¥æœ‰è€…任务åŽæ¥åœ¨ä¸€ä¸ªä¸å˜åœ¨çš„页é¢ä¸Šå‘生异常,它å¯èƒ½ +会收到一个SIGBUSã€‚ä½†æ˜¯ï¼Œæ˜ å°„/预留的原始拥有者的行为将与预期一致。 + +é¢„ç•™æ˜ å°„çš„ä¿®æ”¹ +============== + +ä»¥ä¸‹ä½Žçº§å‡½æ•°ç”¨äºŽå¯¹é¢„ç•™æ˜ å°„è¿›è¡Œä¿®æ”¹ã€‚é€šå¸¸æƒ…å†µä¸‹ï¼Œè¿™äº›å‡½æ•°ä¸ä¼šè¢«ç›´æŽ¥è°ƒç”¨ã€‚è€Œæ˜¯è°ƒç”¨ä¸€ä¸ªé¢„ç•™æ˜ å°„è¾… +助函数,该函数调用这些低级函数ä¸çš„一个。这些低级函数在æºä»£ç (mm/hugetlb.c)ä¸å¾—到了相当好的 +记录。这些函数是:: + + long region_chg(struct resv_map *resv, long f, long t); + long region_add(struct resv_map *resv, long f, long t); + void region_abort(struct resv_map *resv, long f, long t); + long region_count(struct resv_map *resv, long f, long t); + +åœ¨é¢„ç•™æ˜ å°„ä¸Šçš„æ“作通常涉åŠä¸¤ä¸ªæ“作: + +1) region_chg()被调用æ¥æ£€æŸ¥é¢„ç•™æ˜ å°„ï¼Œå¹¶ç¡®å®šåœ¨æŒ‡å®šçš„èŒƒå›´[f, t]内有多少页目å‰æ²¡æœ‰è¢«ä»£è¡¨ã€‚ + + 调用代ç 执行全局检查和分é…,以确定是å¦æœ‰è¶³å¤Ÿçš„巨页使æ“作æˆåŠŸã€‚ + +2) + a) 如果æ“作能够æˆåŠŸï¼Œregi_add()将被调用,以实际修改先å‰ä¼ 递给regi_chg()的相åŒèŒƒå›´ + [f, t]çš„é¢„ç•™æ˜ å°„ã€‚ + b) 如果æ“作ä¸èƒ½æˆåŠŸï¼Œregion_abort被调用,在相åŒçš„范围[f, t]内ä¸æ¢æ“作。 + +注æ„,这是一个两æ¥çš„过程, region_add()å’Œ region_abort()在事先调用 region_chg()åŽä¿è¯ +æˆåŠŸã€‚ region_chg()负责预先分é…任何必è¦çš„æ•°æ®ç»“构以确ä¿åŽç»æ“作(特别是 region_add())的 +æˆåŠŸã€‚ + +如上所述,region_chg()确定该范围内当å‰æ²¡æœ‰åœ¨æ˜ å°„ä¸è¡¨ç¤ºçš„页é¢çš„æ•°é‡ã€‚region_add()è¿”å›žæ·»åŠ +åˆ°æ˜ å°„ä¸çš„范围内的页数。在大多数情况下, region_add() 的返回值与 region_chg() 的返回值相 +åŒã€‚ç„¶è€Œï¼Œåœ¨å…±äº«æ˜ å°„çš„æƒ…å†µä¸‹ï¼Œæœ‰å¯èƒ½åœ¨è°ƒç”¨ region_chg() å’Œ region_add() ä¹‹é—´å¯¹é¢„ç•™æ˜ å°„è¿› +行更改。在这ç§æƒ…况下,regi_add()的返回值将与regi_chg()的返回值ä¸ç¬¦ã€‚在这ç§æƒ…况下,全局计数 +å’Œåæ± è®¡æ•°å¾ˆå¯èƒ½æ˜¯ä¸æ£ç¡®çš„,需è¦è°ƒæ•´ã€‚检查这ç§æƒ…况并进行适当的调整是调用者的责任。 + +函数region_del()è¢«è°ƒç”¨ä»¥ä»Žé¢„ç•™æ˜ å°„ä¸ç§»é™¤åŒºåŸŸã€‚ +它通常在以下情况下被调用: + +- 当hugetlbfs文件系统ä¸çš„ä¸€ä¸ªæ–‡ä»¶è¢«åˆ é™¤æ—¶ï¼Œè¯¥èŠ‚ç‚¹å°†è¢«é‡Šæ”¾ï¼Œé¢„ç•™æ˜ å°„ä¹Ÿè¢«é‡Šæ”¾ã€‚åœ¨é‡Šæ”¾é¢„ç•™æ˜ å°„ + 之å‰ï¼Œæ‰€æœ‰å•ç‹¬çš„file_region结构体必须被释放。在这ç§æƒ…况下,region_del的范围是[0, LONG_MAX]。 +- 当一个hugetlbfs文件æ£åœ¨è¢«æˆªæ–时。在这ç§æƒ…况下,所有在新文件大å°ä¹‹åŽåˆ†é…的页é¢å¿…须被释放。 + æ¤å¤–ï¼Œé¢„ç•™æ˜ å°„ä¸ä»»ä½•è¶…过新文件大å°çš„file_regionæ¡ç›®å¿…é¡»è¢«åˆ é™¤ã€‚åœ¨è¿™ç§æƒ…况下,region_del + 的范围是[new_end_of_file, LONG_MAX]。 +- 当在一个hugetlbfs文件ä¸æ‰“洞时。在这ç§æƒ…况下,巨页被一次次从文件的ä¸é—´ç§»é™¤ã€‚当这些页被移除 + 时,region_del()è¢«è°ƒç”¨ä»¥ä»Žé¢„ç•™æ˜ å°„ä¸ç§»é™¤ç›¸åº”çš„æ¡ç›®ã€‚在这ç§æƒ…况下,region_delè¢«ä¼ é€’çš„èŒƒ + 围是[page_idx, page_idx + 1]。 + +在任何情况下,region_del()éƒ½ä¼šè¿”å›žä»Žé¢„ç•™æ˜ å°„ä¸åˆ 除的页é¢æ•°é‡ã€‚在éžå¸¸ç½•è§çš„情况下,region_del() +会失败。这åªèƒ½å‘生在打洞的情况下,å³å®ƒå¿…须分割一个现有的file_regionæ¡ç›®ï¼Œè€Œä¸èƒ½åˆ†é…一个新的 +结构体。在这ç§é”™è¯¯æƒ…况下,region_del()将返回-ENOMEMã€‚è¿™é‡Œçš„é—®é¢˜æ˜¯ï¼Œé¢„ç•™æ˜ å°„å°†æ˜¾ç¤ºå¯¹è¯¥é¡µæœ‰ +预留。然而,åæ± å’Œå…¨å±€é¢„ç•™è®¡æ•°å°†ä¸åæ˜ è¯¥é¢„ç•™ã€‚ä¸ºäº†å¤„ç†è¿™ç§æƒ…况,调用函数hugetlb_fix_reserve_counts() +æ¥è°ƒæ•´è®¡æ•°å™¨ï¼Œä½¿å…¶ä¸Žä¸èƒ½è¢«åˆ é™¤çš„é¢„ç•™æ˜ å°„æ¡ç›®ç›¸å¯¹åº”。 + +region_count()在解除ç§æœ‰å·¨é¡µæ˜ 射时被调用。在ç§æœ‰æ˜ å°„ä¸ï¼Œé¢„ç•™æ˜ å°„ä¸æ²¡æœ‰æ¡ç›®è¡¨æ˜Žå˜åœ¨ä¸€ä¸ªé¢„留。 +å› æ¤ï¼Œé€šè¿‡è®¡ç®—é¢„ç•™æ˜ å°„ä¸çš„æ¡ç›®æ•°ï¼Œæˆ‘们知é“有多少预留被消耗了,有多少预留是未完æˆçš„ +(Outstanding = (end - start) - region_count(resv, start, endï¼‰ï¼‰ã€‚ç”±äºŽæ˜ å°„æ£åœ¨æ¶ˆ +失,åæ± å’Œå…¨å±€é¢„ç•™è®¡æ•°è¢«æœªå®Œæˆçš„预留数é‡æ‰€å‡åŽ»ã€‚ + +é¢„ç•™æ˜ å°„å¸®åŠ©å‡½æ•° +================ + +æœ‰å‡ ä¸ªè¾…åŠ©å‡½æ•°å¯ä»¥æŸ¥è¯¢å’Œä¿®æ”¹é¢„ç•™æ˜ å°„ã€‚è¿™äº›å‡½æ•°åªå¯¹ç‰¹å®šçš„巨页的预留感兴趣,所以它们åªæ˜¯ä¼ 入一个 +地å€è€Œä¸æ˜¯ä¸€ä¸ªèŒƒå›´ã€‚æ¤å¤–ï¼Œå®ƒä»¬è¿˜ä¼ å…¥ç›¸å…³çš„VMA。从VMAä¸ï¼Œå¯ä»¥ç¡®å®šæ˜ 射的类型(ç§æœ‰æˆ–共享)和预留 +æ˜ å°„çš„ä½ç½®ï¼ˆinode或VMA)。这些函数åªæ˜¯è°ƒç”¨ â€œé¢„ç•™æ˜ å°„çš„ä¿®æ”¹â€ ä¸€èŠ‚ä¸æ述的基础函数。然而, +它们确实考虑到了ç§æœ‰å’Œå…±äº«æ˜ å°„çš„é¢„ç•™æ˜ å°„æ¡ç›®çš„ “相å†å«ä¹‰ï¼Œå¹¶å‘调用者éšè—了这个细节:: + + long vma_needs_reservation(struct hstate *h, + struct vm_area_struct *vma, + unsigned long addr) + +该函数为指定的页é¢è°ƒç”¨ region_chg()。如果ä¸å˜åœ¨é¢„留,则返回1。如果å˜åœ¨é¢„留,则返回0:: + + long vma_commit_reservation(struct hstate *h, + struct vm_area_struct *vma, + unsigned long addr) + +这将调用 region_add(),用于指定的页é¢ã€‚与region_chgå’Œregion_addçš„æƒ…å†µä¸€æ ·ï¼Œè¯¥å‡½æ•°åº”åœ¨ +å…ˆå‰è°ƒç”¨çš„vma_needs_reservationåŽè°ƒç”¨ã€‚å®ƒå°†ä¸ºè¯¥é¡µæ·»åŠ ä¸€ä¸ªé¢„ç•™æ¡ç›®ã€‚å¦‚æžœé¢„ç•™è¢«æ·»åŠ ï¼Œå®ƒå°† +返回1,如果没有则返回0。返回值应与之å‰è°ƒç”¨vma_needs_reservation的返回值进行比较。如果出 +现æ„å¤–çš„å·®å¼‚ï¼Œè¯´æ˜Žåœ¨ä¸¤æ¬¡è°ƒç”¨ä¹‹é—´ä¿®æ”¹äº†é¢„ç•™æ˜ å°„:: + + void vma_end_reservation(struct hstate *h, + struct vm_area_struct *vma, + unsigned long addr) + +这将调用指定页é¢çš„ region_abort()。与region_chgå’Œregion_abortçš„æƒ…å†µä¸€æ ·ï¼Œè¯¥å‡½æ•°åº”åœ¨ +å…ˆå‰è°ƒç”¨çš„vma_needs_reservationåŽè¢«è°ƒç”¨ã€‚它将ä¸æ¢/结æŸæ£åœ¨è¿›è¡Œçš„é¢„ç•™æ·»åŠ æ“作:: + + long vma_add_reservation(struct hstate *h, + struct vm_area_struct *vma, + unsigned long addr) + +这是一个特殊的包装函数,有助于在错误路径上清ç†é¢„留。它åªä»Žrepare_reserve_on_error()函数 +ä¸è°ƒç”¨ã€‚该函数与vma_needs_reservationä¸€èµ·ä½¿ç”¨ï¼Œè¯•å›¾å°†ä¸€ä¸ªé¢„ç•™æ·»åŠ åˆ°é¢„ç•™æ˜ å°„ä¸ã€‚它考虑到 +了ç§æœ‰å’Œå…±äº«æ˜ å°„çš„ä¸åŒé¢„ç•™æ˜ å°„è¯ä¹‰ã€‚å› æ¤ï¼Œregion_addè¢«è°ƒç”¨ç”¨äºŽå…±äº«æ˜ å°„ï¼ˆå› ä¸ºæ˜ å°„ä¸çš„æ¡ç›®è¡¨ +示预留),而region_del被调用用于ç§æœ‰æ˜ å°„ï¼ˆå› ä¸ºæ˜ å°„ä¸æ²¡æœ‰æ¡ç›®è¡¨ç¤ºé¢„留)。关于在错误路径上需 +è¦åšä»€ä¹ˆçš„更多信æ¯ï¼Œè¯·å‚è§ â€œé”™è¯¯è·¯å¾„ä¸çš„预留清ç†â€ 。 + + +错误路径ä¸çš„é¢„ç•™æ¸…ç† +==================== + +æ£å¦‚在:ref:`é¢„ç•™æ˜ å°„å¸®åŠ©å‡½æ•°<resv_map_helpers>` 一节ä¸æ到的,预留的修改分两æ¥è¿›è¡Œã€‚首 +先,在分é…页é¢ä¹‹å‰è°ƒç”¨vma_needs_reservation。如果分é…æˆåŠŸï¼Œåˆ™è°ƒç”¨vma_commit_reservation。 +如果ä¸æ˜¯ï¼Œåˆ™è°ƒç”¨vma_end_reservation。全局和åæ± çš„é¢„ç•™è®¡æ•°æ ¹æ®æ“作的æˆåŠŸæˆ–失败进行调整, +一切都很好。 + +æ¤å¤–,在一个巨页被实例化åŽï¼ŒPagePrivateæ ‡å¿—è¢«æ¸…ç©ºï¼Œè¿™æ ·ï¼Œå½“é¡µé¢æœ€ç»ˆè¢«é‡Šæ”¾æ—¶ï¼Œè®¡æ•°æ˜¯ +æ£ç¡®çš„。 + +ç„¶è€Œï¼Œæœ‰å‡ ç§æƒ…况是,在一个巨页被分é…åŽï¼Œä½†åœ¨å®ƒè¢«å®žä¾‹åŒ–之å‰ï¼Œå°±é‡åˆ°äº†é”™è¯¯ã€‚在这ç§æƒ…况下, +页é¢åˆ†é…å·²ç»æ¶ˆè€—了预留,并进行了适当的åæ± ã€é¢„ç•™æ˜ å°„å’Œå…¨å±€è®¡æ•°è°ƒæ•´ã€‚å¦‚æžœé¡µé¢åœ¨è¿™ä¸ªæ—¶å€™è¢«é‡Šæ”¾ +(在实例化和清除PagePrivate之å‰ï¼‰ï¼Œé‚£ä¹ˆfree_huge_pageå°†å¢žåŠ å…¨å±€é¢„ç•™è®¡æ•°ã€‚ç„¶è€Œï¼Œé¢„ç•™æ˜ å°„ +显示报留被消耗了。这ç§ä¸ä¸€è‡´çš„状æ€å°†å¯¼è‡´é¢„留的巨页的 “泄æ¼â€ 。全局预留计数将比它原本的è¦é«˜ï¼Œ +并阻æ¢åˆ†é…一个预先分é…的页é¢ã€‚ + +函数 restore_reserve_on_error() 试图处ç†è¿™ç§æƒ…况。它有相当完善的文档。这个函数的目的 +æ˜¯å°†é¢„ç•™æ˜ å°„æ¢å¤åˆ°é¡µé¢åˆ†é…å‰çš„状æ€ã€‚通过这ç§æ–¹å¼ï¼Œé¢„ç•™æ˜ å°„çš„çŠ¶æ€å°†ä¸Žé¡µé¢é‡Šæ”¾åŽçš„全局预留计 +数相对应。 + +函数restore_reserve_on_error本身在试图æ¢å¤é¢„ç•™æ˜ å°„æ¡ç›®æ—¶å¯èƒ½ä¼šé‡åˆ°é”™è¯¯ã€‚在这ç§æƒ…况下, +它将简å•åœ°æ¸…除该页的PagePrivateæ ‡å¿—ã€‚è¿™æ ·ä¸€æ¥ï¼Œå½“页é¢è¢«é‡Šæ”¾æ—¶ï¼Œå…¨å±€é¢„留计数将ä¸ä¼šè¢«é€’增。 +ç„¶è€Œï¼Œé¢„ç•™æ˜ å°„å°†ç»§ç»çœ‹èµ·æ¥åƒé¢„ç•™è¢«æ¶ˆè€—äº†ä¸€æ ·ã€‚ä¸€ä¸ªé¡µé¢ä»ç„¶å¯ä»¥è¢«åˆ†é…到该地å€ï¼Œä½†å®ƒä¸ä¼šåƒæœ€ +åˆè®¾æƒ³çš„é‚£æ ·ä½¿ç”¨ä¸€ä¸ªé¢„ç•™é¡µã€‚ + +有一些代ç (最明显的是userfaultfd)ä¸èƒ½è°ƒç”¨restore_reserve_on_error。在这ç§æƒ…况下, +它简å•åœ°ä¿®æ”¹äº†PagePrivate,以便在释放巨页时ä¸ä¼šæ³„露预留。 + + +预留和内å˜ç–ç•¥ +============== +当git第一次被用æ¥ç®¡ç†Linux代ç 时,æ¯ä¸ªèŠ‚点的巨页列表就å˜åœ¨äºŽhstate结构ä¸ã€‚预留的概念是 +在一段时间åŽåŠ å…¥çš„ã€‚å½“é¢„ç•™è¢«æ·»åŠ æ—¶ï¼Œæ²¡æœ‰å°è¯•å°†å†…å˜ç–略考虑在内。虽然cpusets与内å˜ç–ç•¥ä¸ +完全相åŒï¼Œä½†hugetlb_acct_memoryä¸çš„这个注释总结了预留和cpusets/内å˜ç–略之间的相互作 +用:: + + + /* + * 当cpuset被é…ç½®æ—¶ï¼Œå®ƒæ‰“ç ´äº†ä¸¥æ ¼çš„hugetlb页é¢é¢„ç•™ï¼Œå› ä¸ºè®¡æ•°æ˜¯åœ¨ä¸€ä¸ªå…¨å±€å˜é‡ä¸Šå®Œ + * æˆçš„。在有cpusetçš„æƒ…å†µä¸‹ï¼Œè¿™æ ·çš„é¢„ç•™å®Œå…¨æ˜¯åžƒåœ¾ï¼Œå› ä¸ºé¢„ç•™æ²¡æœ‰æ ¹æ®å½“å‰cpusetçš„ + * 页é¢å¯ç”¨æ€§æ¥æ£€æŸ¥ã€‚在任务所在的cpusetä¸ç¼ºä¹ç©ºé—²çš„htlb页é¢æ—¶ï¼Œåº”用程åºä»ç„¶æœ‰å¯èƒ½ + * è¢«å†…æ ¸OOM'ed。试图用cpusetæ¥æ‰§è¡Œä¸¥æ ¼çš„è®¡æ•°å‡ ä¹Žæ˜¯ä¸å¯èƒ½çš„ï¼ˆæˆ–è€…è¯´å¤ªéš¾çœ‹äº†ï¼‰ï¼Œå› + * 为cpuset太ä¸ç¨³å®šäº†ï¼Œä»»åŠ¡æˆ–内å˜èŠ‚点å¯ä»¥åœ¨cpuset之间动æ€ç§»åŠ¨ã€‚与cpuset共享 + * hugetlbæ˜ å°„çš„è¯ä¹‰å˜åŒ–是ä¸å¯å–的。然而,为了预留一些è¯ä¹‰ï¼Œæˆ‘们退回到检查当å‰ç©ºé—² + * 页的å¯ç”¨æ€§ï¼Œä½œä¸ºä¸€ç§æœ€å¥½çš„å°è¯•ï¼Œå¸Œæœ›èƒ½å°†cpuset改å˜è¯ä¹‰çš„å½±å“é™åˆ°æœ€ä½Žã€‚ + */ + +æ·»åŠ å·¨é¡µé¢„ç•™æ˜¯ä¸ºäº†é˜²æ¢åœ¨ç¼ºé¡µå¼‚常时出现æ„外的页é¢åˆ†é…失败(OOM)。然而,如果一个应用 +程åºä½¿ç”¨cpusets或内å˜ç–略,就ä¸èƒ½ä¿è¯åœ¨æ‰€éœ€çš„节点上有巨页å¯ç”¨ã€‚å³ä½¿æœ‰è¶³å¤Ÿæ•°é‡çš„全局 +预留,也是如æ¤ã€‚ + +Hugetlbfs回归测试 +================= + +最完整的hugetlb测试集在libhugetlbfsä»“åº“ã€‚å¦‚æžœä½ ä¿®æ”¹äº†ä»»ä½•hugetlb相关的代ç ,请使用 +libhugetlbfs测试套件æ¥æ£€æŸ¥å›žå½’情况。æ¤å¤–ï¼Œå¦‚æžœä½ æ·»åŠ äº†ä»»ä½•æ–°çš„hugetlb功能,请在 +libhugetlbfsä¸æ·»åŠ 适当的测试。 + +-- +Mike Kravetz,2017å¹´4月7æ—¥ diff --git a/Documentation/translations/zh_CN/vm/hwpoison.rst b/Documentation/translations/zh_CN/vm/hwpoison.rst new file mode 100644 index 000000000000..c6e1e7bdb05b --- /dev/null +++ b/Documentation/translations/zh_CN/vm/hwpoison.rst @@ -0,0 +1,166 @@ + +:Original: Documentation/vm/hwpoison.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +======== +hwpoison +======== + +什么是hwpoison? +=============== + + +å³å°†æŽ¨å‡ºçš„英特尔CPU支æŒä»Žä¸€äº›å†…å˜é”™è¯¯ä¸æ¢å¤ï¼ˆ ``MCAæ¢å¤`` )。这需è¦æ“作系统宣布 +一个页é¢"poisoned",æ€æ»ä¸Žä¹‹ç›¸å…³çš„进程,并é¿å…在未æ¥ä½¿ç”¨å®ƒã€‚ + +这个补ä¸åŒ…在虚拟机ä¸å®žçŽ°äº†å¿…è¦çš„(编程)框架。 + +引用概述ä¸çš„评论:: + + 高级机器的检查与处ç†ã€‚处ç†æ–¹æ³•æ˜¯æŸå的页é¢è¢«ç¡¬ä»¶æŠ¥å‘Šï¼Œé€šå¸¸æ˜¯ç”±äºŽ2ä½ECC内 + å˜æˆ–高速缓å˜æ•…障。 + + 这主è¦æ˜¯é’ˆå¯¹åœ¨åŽå°æ£€æµ‹åˆ°çš„æŸå的页é¢ã€‚当当å‰çš„CPU试图访问它时,当å‰è¿è¡Œçš„进程 + å¯ä»¥ç›´æŽ¥è¢«æ€æ»ã€‚å› ä¸ºè¿˜æ²¡æœ‰è®¿é—®æŸå的页é¢, 如果错误由于æŸç§åŽŸå› ä¸èƒ½è¢«å¤„ç†ï¼Œå°±å¯ + 以安全地忽略它. 而ä¸æ˜¯ç”¨å¦å¤–一个机器检查去处ç†å®ƒã€‚ + + 处ç†ä¸åŒçŠ¶æ€çš„页é¢ç¼“å˜é¡µã€‚这里棘手的部分是,相对于其他虚拟内å˜ç”¨æˆ·ï¼Œ 我们å¯ä»¥å¼‚ + æ¥è®¿é—®ä»»ä½•é¡µé¢ã€‚å› ä¸ºå†…å˜æ•…éšœå¯èƒ½éšæ—¶éšåœ°å‘生,å¯èƒ½è¿å了他们的一些å‡è®¾ã€‚这就是 + 为什么这段代ç å¿…é¡»éžå¸¸å°å¿ƒã€‚一般æ¥è¯´ï¼Œå®ƒè¯•å›¾ä½¿ç”¨æ£å¸¸çš„é”è§„åˆ™ï¼Œå¦‚èŽ·å¾—æ ‡å‡†é”,å³ä½¿ + è¿™æ„味ç€é”™è¯¯å¤„ç†å¯èƒ½éœ€è¦å¾ˆé•¿çš„时间。 + + 这里的一些æ“作有点低效,并且具有éžçº¿æ€§çš„算法å¤æ‚æ€§ï¼Œå› ä¸ºæ•°æ®ç»“构没有针对这ç§æƒ… + 况进行优化。特别是从vmaåˆ°è¿›ç¨‹çš„æ˜ å°„å°±æ˜¯è¿™ç§æƒ…况。由于这ç§æƒ…况大概率是罕è§çš„,所 + 以我们希望我们å¯ä»¥æ‘†è„±è¿™ç§æƒ…况。 + +该代ç ç”±mm/memory-failure.cä¸çš„高级处ç†ç¨‹åºã€ä¸€ä¸ªæ–°çš„页é¢poisonä½å’Œè™šæ‹Ÿæœºä¸çš„ +å„ç§æ£€æŸ¥ç»„æˆï¼Œç”¨æ¥å¤„ç†poison的页é¢ã€‚ + +现在主è¦ç›®æ ‡æ˜¯KVM客户机,但它适用于所有类型的应用程åºã€‚支æŒKVM需è¦æœ€è¿‘çš„qemu-kvm +版本。 + +对于KVM的使用,需è¦ä¸€ä¸ªæ–°çš„ä¿¡å·ç±»åž‹ï¼Œè¿™æ ·KVMå°±å¯ä»¥ç”¨é€‚当的地å€å°†æœºå™¨æ£€æŸ¥æ³¨å…¥åˆ°å®¢æˆ· +机ä¸ã€‚这在ç†è®ºä¸Šä¹Ÿå…许其他应用程åºå¤„ç†å†…å˜æ•…障。我们的期望是,所有的应用程åºéƒ½ä¸è¦è¿™ +æ ·åšï¼Œä½†ä¸€äº›éžå¸¸ä¸“业的应用程åºå¯èƒ½ä¼šè¿™æ ·åšã€‚ + +æ•…éšœæ¢å¤æ¨¡å¼ +============ + +有两ç§ï¼ˆå®žé™…上是三ç§ï¼‰æ¨¡å¼çš„内å˜æ•…éšœæ¢å¤å¯ä»¥åœ¨ã€‚ + +vm.memory_failure_recovery sysctl 置零: + 所有的内å˜æ•…障都会导致panic。请ä¸è¦å°è¯•æ¢å¤ã€‚ + +æ—©æœŸå¤„ç† + (å¯ä»¥åœ¨å…¨å±€å’Œæ¯ä¸ªè¿›ç¨‹ä¸æŽ§åˆ¶) 一旦检测到错误,立å³å‘应用程åºå‘é€SIGBUSè¿™å…许 + 应用程åºä»¥æ¸©å’Œçš„æ–¹å¼å¤„ç†å†…å˜é”™è¯¯ï¼ˆä¾‹å¦‚,放弃å—å½±å“的对象) 这是KVM qemu使用的 + 模å¼ã€‚ + +æŽ¨è¿Ÿå¤„ç† + 当应用程åºè¿è¡Œåˆ°æŸå的页é¢æ—¶ï¼Œå‘é€SIGBUS。这对ä¸çŸ¥é“内å˜é”™è¯¯çš„应用程åºæ¥è¯´æ˜¯ + 最好的,默认情况下注æ„一些页é¢æ€»æ˜¯è¢«å½“作late kill处ç†ã€‚ + +用户控制 +======== + +vm.memory_failure_recovery + å‚阅 sysctl.txt + +vm.memory_failure_early_kill + 全局å¯ç”¨early kill + +PR_MCE_KILL + 设置early/late kill mode/revert 到系统默认值。 + + arg1: PR_MCE_KILL_CLEAR: + æ¢å¤åˆ°ç³»ç»Ÿé»˜è®¤å€¼ + arg1: PR_MCE_KILL_SET: + arg2å®šä¹‰äº†çº¿ç¨‹ç‰¹å®šæ¨¡å¼ + + PR_MCE_KILL_EARLY: + Early kill + PR_MCE_KILL_LATE: + Late kill + PR_MCE_KILL_DEFAULT + 使用系统全局默认值 + + 注æ„ï¼Œå¦‚æžœä½ æƒ³æœ‰ä¸€ä¸ªä¸“é—¨çš„çº¿ç¨‹ä»£è¡¨è¿›ç¨‹å¤„ç†SIGBUS(BUS_MCEERR_AO)ï¼Œä½ åº”è¯¥åœ¨ + 指定线程上调用prctl(PR_MCE_KILL_EARLY)。å¦åˆ™ï¼ŒSIGBUS将被å‘é€åˆ°ä¸»çº¿ç¨‹ã€‚ + +PR_MCE_KILL_GET + 返回当å‰æ¨¡å¼ + +测试 +==== + +* madvise(MADV_HWPOISON, ....) (as root) - 在测试过程ä¸Poisonä¸€ä¸ªé¡µé¢ + +* 通过debugfs ``/sys/kernel/debug/hwpoison/`` hwpoison-injectæ¨¡å— + + corrupt-pfn + 在PFN处注入hwpoison故障,并echoed到这个文件。这åšäº†ä¸€äº›æ—©æœŸè¿‡æ»¤ï¼Œä»¥é¿ + å…在测试套件ä¸æŸåéžé¢„期页é¢ã€‚ + unpoison-pfn + 在PFNçš„Software-unpoison页é¢å¯¹åº”åˆ°è¿™ä¸ªæ–‡ä»¶ã€‚è¿™æ ·ï¼Œä¸€ä¸ªé¡µé¢å¯ä»¥å†æ¬¡è¢« + å¤ç”¨ã€‚è¿™åªå¯¹Linux注入的故障起作用,对真æ£çš„内å˜æ•…éšœä¸èµ·ä½œç”¨ã€‚ + + 注æ„这些注入接å£å¹¶ä¸ç¨³å®šï¼Œå¯èƒ½ä¼šåœ¨ä¸åŒçš„å†…æ ¸ç‰ˆæœ¬ä¸å‘生å˜åŒ– + + corrupt-filter-dev-major, corrupt-filter-dev-minor + åªå¤„ç†ä¸Žå—设备major/minor定义的文件系统相关的页é¢çš„内å˜æ•…障。-1U是通 + é…符值。这应该åªç”¨äºŽäººå·¥æ³¨å…¥çš„测试。 + + corrupt-filter-memcg + é™åˆ¶æ³¨å…¥åˆ°memgroup拥有的页é¢ã€‚ç”±memcgçš„inodeå·æŒ‡å®šã€‚ + + Example:: + + mkdir /sys/fs/cgroup/mem/hwpoison + + usemem -m 100 -s 1000 & + echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks + + memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ') + echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg + + page-types -p `pidof init` --hwpoison # shall do nothing + page-types -p `pidof usemem` --hwpoison # poison its pages + + corrupt-filter-flags-mask, corrupt-filter-flags-value + 当指定时,åªæœ‰åœ¨((page_flags & mask) == value)的情况下æ‰ä¼špoison页é¢ã€‚ + è¿™å…许对许多ç§ç±»çš„页é¢è¿›è¡ŒåŽ‹åŠ›æµ‹è¯•ã€‚page_flags与/proc/kpageflagsä¸çš„相 + åŒã€‚è¿™äº›æ ‡å¿—ä½åœ¨include/linux/kernel-page-flags.hä¸å®šä¹‰ï¼Œå¹¶åœ¨ + Documentation/admin-guide/mm/pagemap.rstä¸è®°å½•ã€‚ + +* 架构特定的MCE注入器 + + x86 有 mce-inject, mce-test + + 在mce-testä¸çš„一些便æºå¼hwpoison测试程åºï¼Œè§ä¸‹æ–‡ã€‚ + +引用 +==== + +http://halobates.de/mce-lc09-2.pdf + 09å¹´LinuxCon的概述演讲 + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git + 测试套件(在tsrcä¸çš„hwpoison特定å¯ç§»æ¤æµ‹è¯•ï¼‰ã€‚ + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git + x86特定的注入器 + + +é™åˆ¶ +==== +- ä¸æ˜¯æ‰€æœ‰çš„页é¢ç±»åž‹éƒ½è¢«æ”¯æŒï¼Œè€Œä¸”永远ä¸ä¼šã€‚å¤§å¤šæ•°å†…æ ¸å†…éƒ¨å¯¹è±¡ä¸èƒ½è¢«æ¢ + å¤ï¼Œç›®å‰åªæœ‰LRU页。 + +--- +Andi Kleen, 2009å¹´10月 diff --git a/Documentation/translations/zh_CN/vm/index.rst b/Documentation/translations/zh_CN/vm/index.rst index a1d2f0356cc1..a1c6d529b6ff 100644 --- a/Documentation/translations/zh_CN/vm/index.rst +++ b/Documentation/translations/zh_CN/vm/index.rst @@ -27,27 +27,28 @@ TODO:待引用文档集被翻译完毕åŽè¯·åŠæ—¶ä¿®æ”¹æ¤å¤„) free_page_reporting highmem ksm + frontswap + hmm + hwpoison + hugetlbfs_reserv + memory-model + mmu_notifier + numa + overcommit-accounting + page_frags + page_owner + page_table_check + remap_file_pages + split_page_table_lock + z3fold + zsmalloc TODOLIST: * arch_pgtable_helpers * free_page_reporting -* frontswap -* hmm -* hwpoison * hugetlbfs_reserv -* memory-model -* mmu_notifier -* numa -* overcommit-accounting * page_migration -* page_frags -* page_owner -* page_table_check -* remap_file_pages * slub -* split_page_table_lock * transhuge * unevictable-lru * vmalloced-kernel-stacks -* z3fold -* zsmalloc diff --git a/Documentation/translations/zh_CN/vm/memory-model.rst b/Documentation/translations/zh_CN/vm/memory-model.rst new file mode 100644 index 000000000000..013e30c88d72 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/memory-model.rst @@ -0,0 +1,135 @@ +.. SPDX-License-Identifier: GPL-2.0 + +:Original: Documentation/vm/memory-model.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +============ +物ç†å†…å˜æ¨¡åž‹ +============ + +系统ä¸çš„物ç†å†…å˜å¯ä»¥ç”¨ä¸åŒçš„æ–¹å¼è¿›è¡Œå¯»å€ã€‚最简å•çš„情况是,物ç†å†…å˜ä»Žåœ°å€0å¼€ +始,跨越一个连ç»çš„范围,直到最大的地å€ã€‚然而,这个范围å¯èƒ½åŒ…å«CPUæ— æ³•è®¿é—®çš„ +å°å”隙。那么,在完全ä¸åŒçš„地å€å¯èƒ½æœ‰å‡ 个连ç»çš„范围。而且,别忘了NUMA,å³ä¸ +åŒçš„内å˜åº“连接到ä¸åŒçš„CPU。 + +Linux使用两ç§å†…å˜æ¨¡åž‹ä¸çš„一ç§å¯¹è¿™ç§å¤šæ ·æ€§è¿›è¡ŒæŠ½è±¡ã€‚FLATMEMå’ŒSPARSEMã€‚æ¯ +个架构都定义了它所支æŒçš„内å˜æ¨¡åž‹ï¼Œé»˜è®¤çš„内å˜æ¨¡åž‹æ˜¯ä»€ä¹ˆï¼Œä»¥åŠæ˜¯å¦æœ‰å¯èƒ½æ‰‹åŠ¨ +覆盖该默认值。 + +所有的内å˜æ¨¡åž‹éƒ½ä½¿ç”¨æŽ’列在一个或多个数组ä¸çš„ `struct page` æ¥è·Ÿè¸ªç‰©ç†é¡µ +帧的状æ€ã€‚ + +æ— è®ºé€‰æ‹©å“ªç§å†…å˜æ¨¡åž‹ï¼Œç‰©ç†é¡µæ¡†å·ï¼ˆPFN)和相应的 `struct page` ä¹‹é—´éƒ½å˜ +åœ¨ä¸€å¯¹ä¸€çš„æ˜ å°„å…³ç³»ã€‚ + +æ¯ä¸ªå†…å˜æ¨¡åž‹éƒ½å®šä¹‰äº† :c:func:`pfn_to_page` å’Œ :c:func:`page_to_pfn` +帮助函数,å…许从PFN到 `struct page` 的转æ¢ï¼Œå之亦然。 + +FLATMEM +======= + +最简å•çš„内å˜æ¨¡åž‹æ˜¯FLATMEM。这个模型适用于éžNUMA系统的连ç»æˆ–大部分连ç»çš„ +物ç†å†…å˜ã€‚ + +在FLATMEM内å˜æ¨¡åž‹ä¸ï¼Œæœ‰ä¸€ä¸ªå…¨å±€çš„ `mem_map` 数组æ¥æ˜ 射整个物ç†å†…å˜ã€‚对 +于大多数架构,å”隙在 `mem_map` 数组ä¸éƒ½æœ‰æ¡ç›®ã€‚与å”洞相对应的 `struct page` +对象从未被完全åˆå§‹åŒ–。 + +ä¸ºäº†åˆ†é… `mem_map` 数组,架构特定的设置代ç 应该调用free_area_init()函数。 +然而,在调用memblock_free_all()函数之å‰ï¼Œæ˜ 射数组是ä¸èƒ½ä½¿ç”¨çš„,该函数 +将所有的内å˜äº¤ç»™é¡µåˆ†é…器。 + +一个架构å¯èƒ½ä¼šé‡Šæ”¾ `mem_map` 数组ä¸ä¸åŒ…括实际物ç†é¡µçš„部分。在这ç§æƒ…况下,特 +定架构的 :c:func:`pfn_valid` 实现应该考虑到 `mem_map` ä¸çš„å”隙。 + +使用FLATMEM,PFNå’Œ `struct page` 之间的转æ¢æ˜¯ç›´æŽ¥çš„。 `PFN - ARCH_PFN_OFFSET` +是 `mem_map` 数组的一个索引。 + +`ARCH_PFN_OFFSET` 定义了物ç†å†…å˜èµ·å§‹åœ°å€ä¸åŒäºŽ0的系统的第一个页框å·ã€‚ + +SPARSEMEM +========= + +SPARSEMEM是Linuxä¸æœ€é€šç”¨çš„内å˜æ¨¡åž‹ï¼Œå®ƒæ˜¯å”¯ä¸€æ”¯æŒè‹¥å¹²é«˜çº§åŠŸèƒ½çš„内å˜æ¨¡åž‹ï¼Œ +如物ç†å†…å˜çš„çƒæ’æ‹”ã€éžæ˜“失性内å˜è®¾å¤‡çš„替代内å˜å›¾å’Œè¾ƒå¤§ç³»ç»Ÿçš„内å˜å›¾çš„延迟 +åˆå§‹åŒ–。 + +SPARSEMEM模型将物ç†å†…å˜æ˜¾ç¤ºä¸ºä¸€ä¸ªéƒ¨åˆ†çš„集åˆã€‚一个区段用mem_section结构 +ä½“è¡¨ç¤ºï¼Œå®ƒåŒ…å« `section_mem_map` ï¼Œä»Žé€»è¾‘ä¸Šè®²ï¼Œå®ƒæ˜¯ä¸€ä¸ªæŒ‡å‘ `struct page` +阵列的指针。然而,它被å˜å‚¨åœ¨ä¸€äº›å…¶ä»–çš„magicä¸ï¼Œä»¥å¸®åŠ©åˆ†åŒºç®¡ç†ã€‚åŒºæ®µçš„å¤§å° +和最大区段数是使用 `SECTION_SIZE_BITS` å’Œ `MAX_PHYSMEM_BITS` å¸¸é‡ +æ¥æŒ‡å®šçš„,这两个常é‡æ˜¯ç”±æ¯ä¸ªæ”¯æŒSPARSEMEM的架构定义的。 `MAX_PHYSMEM_BITS` +是一个架构所支æŒçš„物ç†åœ°å€çš„实际宽度,而 `SECTION_SIZE_BITS` 是一个任 +æ„的值。 + +最大的段数表示为 `NR_MEM_SECTIONS` ,定义为 + +.. math:: + + NR\_MEM\_SECTIONS = 2 ^ {(MAX\_PHYSMEM\_BITS - SECTION\_SIZE\_BITS)} + +`mem_section` 对象被安排在一个å«åš `mem_sections` 的二维数组ä¸ã€‚这个数组的 +大å°å’Œä½ç½®å–决于 `CONFIG_SPARSEM_EXTREME` å’Œå¯èƒ½çš„最大段数: + +* 当 `CONFIG_SPARSEMEM_EXTREME` 被ç¦ç”¨æ—¶ï¼Œ `mem_sections` 数组是é™æ€çš„,有 + `NR_MEM_SECTIONS` 行。æ¯ä¸€è¡ŒæŒæœ‰ä¸€ä¸ª `mem_section` 对象。 +* 当 `CONFIG_SPARSEMEM_EXTREME` 被å¯ç”¨æ—¶ï¼Œ `mem_sections` 数组被动æ€åˆ†é…。 + æ¯ä¸€è¡ŒåŒ…å«ä»·å€¼ `PAGE_SIZE` çš„ `mem_section` 对象,行数的计算是为了适应所有的 + 内å˜åŒºã€‚ + +架构设置代ç 应该调用sparse_init()æ¥åˆå§‹åŒ–内å˜åŒºå’Œå†…å˜æ˜ 射。 + +通过SPARSEMEM,有两ç§å¯èƒ½çš„æ–¹å¼å°†PFN转æ¢ä¸ºç›¸åº”çš„ `struct page` --"classic sparse"å’Œ + "sparse vmemmap"。选择是在构建时进行的,它由 `CONFIG_SPARSEMEM_VMEMMAP` çš„ + 值决定。 + +Classic sparse在page->flagsä¸ç¼–ç 了一个页é¢çš„段å·ï¼Œå¹¶ä½¿ç”¨PFN的高ä½æ¥è®¿é—®æ˜ 射该页 +框的段。在一个区段内,PFN是指å‘页数组的索引。 + +Sparse vmemmapvmemmapä½¿ç”¨è™šæ‹Ÿæ˜ å°„çš„å†…å˜æ˜ å°„æ¥ä¼˜åŒ–pfn_to_pageå’Œpage_to_pfnæ“ +作。有一个全局的 `struct page *vmemmap` 指针,指å‘一个虚拟连ç»çš„ `struct page` +对象阵列。PFN是该数组的一个索引,`struct page` 从 `vmemmap` çš„å移é‡æ˜¯è¯¥é¡µçš„PFN。 + +为了使用vmemmap,一个架构必须ä¿ç•™ä¸€ä¸ªè™šæ‹Ÿåœ°å€çš„èŒƒå›´ï¼Œä»¥æ˜ å°„åŒ…å«å†…å˜æ˜ 射的物ç†é¡µï¼Œå¹¶ +ç¡®ä¿ `vmemmap`指å‘该范围。æ¤å¤–,架构应该实现 :c:func:`vmemmap_populate` 方法, +它将分é…物ç†å†…å˜å¹¶ä¸ºè™šæ‹Ÿå†…å˜æ˜ 射创建页表。如果一个架构对vmemmapæ˜ å°„æ²¡æœ‰ä»»ä½•ç‰¹æ®Šè¦æ±‚, +它å¯ä»¥ä½¿ç”¨é€šç”¨å†…å˜ç®¡ç†æ供的默认 :c:func:`vmemmap_populate_basepages`。 + +è™šæ‹Ÿæ˜ å°„çš„å†…å˜æ˜ å°„å…许将æŒä¹…性内å˜è®¾å¤‡çš„ `struct page` 对象å˜å‚¨åœ¨è¿™äº›è®¾å¤‡ä¸Šé¢„先分 +é…çš„å˜å‚¨ä¸ã€‚è¿™ç§å˜å‚¨ç”¨vmem_altmapç»“æž„è¡¨ç¤ºï¼Œæœ€ç»ˆé€šè¿‡ä¸€é•¿ä¸²çš„å‡½æ•°è°ƒç”¨ä¼ é€’ç»™ +vmemmap_populate()。vmemmap_populate()实现å¯ä»¥ä½¿ç”¨ `vmem_altmap` å’Œ +:c:func:`vmemmap_alloc_block_buf` 助手æ¥åˆ†é…æŒä¹…性内å˜è®¾å¤‡ä¸Šçš„内å˜æ˜ 射。 + +ZONE_DEVICE +=========== +`ZONE_DEVICE` 设施建立在 `SPARSEM_VMEMMAP` 之上,为设备驱动识别的物ç†åœ°å€èŒƒ +å›´æä¾› `struct page` `mem_map` æœåŠ¡ã€‚ `ZONE_DEVICE` çš„ "设备" æ–¹é¢ä¸Žä»¥ä¸‹ +事实有关:这些地å€èŒƒå›´çš„页é¢å¯¹è±¡ä»Žæœªè¢«åœ¨çº¿æ ‡è®°è¿‡ï¼Œè€Œä¸”必须对设备进行引用,而ä¸ä»…ä»… +是页é¢ï¼Œä»¥ä¿æŒå†…å˜è¢«â€œé”定â€ä»¥ä¾¿ä½¿ç”¨ã€‚ `ZONE_DEVICE` ,通过 :c:func:`devm_memremap_pages` , +为给定的pfns范围执行足够的内å˜çƒæ’æ‹”æ¥å¼€å¯ :c:func:`pfn_to_page`, +:c:func:`page_to_pfn`, ,和 :c:func:`get_user_pages` æœåŠ¡ã€‚由于页é¢å¼• +用计数永远ä¸ä¼šä½ŽäºŽ1,所以页é¢æ°¸è¿œä¸ä¼šè¢«è¿½è¸ªä¸ºç©ºé—²å†…å˜ï¼Œé¡µé¢çš„ `struct list_head lru` +空间被é‡æ–°åˆ©ç”¨ï¼Œç”¨äºŽå‘æ˜ å°„è¯¥å†…å˜çš„主机设备/驱动程åºè¿›è¡Œåå‘引用。 + +虽然 `SPARSEMEM` 将内å˜ä½œä¸ºä¸€ä¸ªåŒºæ®µçš„集åˆï¼Œå¯ä»¥é€‰æ‹©æ”¶é›†å¹¶åˆæˆå†…å˜å—,但 +`ZONE_DEVICE` 用户需è¦æ›´å°çš„颗粒度æ¥å¡«å…… `mem_map` 。鉴于 `ZONE_DEVICE` +内å˜ä»Žæœªè¢«åœ¨çº¿æ ‡è®°ï¼Œå› æ¤å®ƒçš„内å˜èŒƒå›´ä»Žæœªé€šè¿‡sysfs内å˜çƒæ’æ‹”api暴露在内å˜å—边界 +上。这个实现ä¾èµ–于这ç§ç¼ºä¹ç”¨æˆ·æŽ¥å£çš„约æŸï¼Œå…许å段大å°çš„内å˜èŒƒå›´è¢«æŒ‡å®šç»™ +:c:func:`arch_add_memory` ,å³å†…å˜çƒæ’拔的上åŠéƒ¨åˆ†ã€‚å段支æŒå…许2MB作为 +:c:func:`devm_memremap_pages` 的跨架构通用对é½é¢—粒度。 + +`ZONE_DEVICE` 的用户是: + +* pmem: 通过DAXæ˜ å°„å°†å¹³å°æŒä¹…性内å˜ä½œä¸ºç›´æŽ¥I/Oç›®æ ‡ä½¿ç”¨ã€‚ + +* hmm: 用 `->page_fault()` å’Œ `->page_free()` 事件回调扩展 `ZONE_DEVICE` , + 以å…许设备驱动程åºå调与设备内å˜ç›¸å…³çš„内å˜ç®¡ç†äº‹ä»¶ï¼Œé€šå¸¸æ˜¯GPU内å˜ã€‚å‚è§/vm/hmm.rst。 + +* p2pdma: 创建 `struct page` 对象,å…许PCI/E拓扑结构ä¸çš„peer设备å调它们之间的 + 直接DMAæ“作,å³ç»•è¿‡ä¸»æœºå†…å˜ã€‚ diff --git a/Documentation/translations/zh_CN/vm/mmu_notifier.rst b/Documentation/translations/zh_CN/vm/mmu_notifier.rst new file mode 100644 index 000000000000..b29a37b33628 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/mmu_notifier.rst @@ -0,0 +1,97 @@ +:Original: Documentation/vm/mmu_notifier.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + + +什么时候需è¦é¡µè¡¨é”内通知? +========================== + +当清除一个pte/pmd时,我们å¯ä»¥é€‰æ‹©é€šè¿‡åœ¨é¡µè¡¨é”下(通知版的\*_clear_flush调用 +mmu_notifier_invalidate_range)通知事件。但这ç§é€šçŸ¥å¹¶ä¸æ˜¯åœ¨æ‰€æœ‰æƒ…况下都需è¦çš„。 + +对于二级TLB(éžCPU TLB),如IOMMU TLB或设备TLB(当设备使用类似ATS/PASID的东西让 +IOMMUèµ°CPU页表æ¥è®¿é—®è¿›ç¨‹çš„虚拟地å€ç©ºé—´ï¼‰ã€‚åªæœ‰ä¸¤ç§æƒ…况需è¦åœ¨æ¸…除pte/pmd时在æŒæœ‰é¡µ +表é”çš„åŒæ—¶é€šçŸ¥è¿™äº›äºŒçº§TLB: + + A) 在mmu_notifier_invalidate_range_end()之å‰ï¼Œæ”¯æŒé¡µçš„地å€è¢«é‡Šæ”¾ã€‚ + B) 一个页表项被更新以指å‘一个新的页é¢ï¼ˆCOW,零页上的写异常,__replace_page(),...)。 + +情况Aå¾ˆæ˜Žæ˜¾ï¼Œä½ ä¸æƒ³å†’风险让设备写到一个现在å¯èƒ½è¢«ä¸€äº›å®Œå…¨ä¸åŒçš„任务使用的页é¢ã€‚ + +情况Bæ›´åŠ å¾®å¦™ã€‚ä¸ºäº†æ£ç¡®èµ·è§ï¼Œå®ƒéœ€è¦æŒ‰ç…§ä»¥ä¸‹åºåˆ—å‘生: + + - ä¸Šé¡µè¡¨é” + - 清除页表项并通知 ([pmd/pte]p_huge_clear_flush_notify()) + - 设置页表项以指å‘新页 + +如果在设置新的pte/pmd值之å‰ï¼Œæ¸…除页表项之åŽæ²¡æœ‰è¿›è¡Œé€šçŸ¥ï¼Œé‚£ä¹ˆä½ å°±ä¼šç ´å设备的C11或 +C++11ç‰å†…å˜æ¨¡åž‹ã€‚ + +考虑以下情况(设备使用类似于ATS/PASID的功能)。 + +两个地å€addrAå’ŒaddrBï¼Œè¿™æ ·|addrA - addrB| >= PAGE_SIZE,我们å‡è®¾å®ƒä»¬æ˜¯COWçš„ +写ä¿æŠ¤ï¼ˆB的其他情况也适用)。 + +:: + + [Time N] -------------------------------------------------------------------- + CPU-thread-0 {å°è¯•å†™åˆ°addrA} + CPU-thread-1 {å°è¯•å†™åˆ°addrB} + CPU-thread-2 {} + CPU-thread-3 {} + DEV-thread-0 {读å–addrA并填充设备TLB} + DEV-thread-2 {读å–addrB并填充设备TLB} + [Time N+1] ------------------------------------------------------------------ + CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} + CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} + CPU-thread-2 {} + CPU-thread-3 {} + DEV-thread-0 {} + DEV-thread-2 {} + [Time N+2] ------------------------------------------------------------------ + CPU-thread-0 {COW_step1: {更新页表以指å‘addrA的新页}} + CPU-thread-1 {COW_step1: {更新页表以指å‘addrB的新页}} + CPU-thread-2 {} + CPU-thread-3 {} + DEV-thread-0 {} + DEV-thread-2 {} + [Time N+3] ------------------------------------------------------------------ + CPU-thread-0 {preempted} + CPU-thread-1 {preempted} + CPU-thread-2 {写入addrA,这是对新页é¢çš„写入} + CPU-thread-3 {} + DEV-thread-0 {} + DEV-thread-2 {} + [Time N+3] ------------------------------------------------------------------ + CPU-thread-0 {preempted} + CPU-thread-1 {preempted} + CPU-thread-2 {} + CPU-thread-3 {写入addrB,这是一个写入新页的过程} + DEV-thread-0 {} + DEV-thread-2 {} + [Time N+4] ------------------------------------------------------------------ + CPU-thread-0 {preempted} + CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} + CPU-thread-2 {} + CPU-thread-3 {} + DEV-thread-0 {} + DEV-thread-2 {} + [Time N+5] ------------------------------------------------------------------ + CPU-thread-0 {preempted} + CPU-thread-1 {} + CPU-thread-2 {} + CPU-thread-3 {} + DEV-thread-0 {从旧页ä¸è¯»å–addrA} + DEV-thread-2 {从新页é¢è¯»å–addrB} + +æ‰€ä»¥åœ¨è¿™é‡Œï¼Œå› ä¸ºåœ¨N+2的时候,清空页表项没有和通知一起作废二级TLB,设备在看到addrAçš„æ–°å€¼ä¹‹å‰ +就看到了addrBçš„æ–°å€¼ã€‚è¿™å°±ç ´å了设备的总内å˜åºã€‚ + +当改å˜ä¸€ä¸ªpte的写ä¿æŠ¤æˆ–指å‘一个新的具有相åŒå†…容的写ä¿æŠ¤é¡µï¼ˆKSM)时,将mmu_notifier_invalidate_range +调用延迟到页表é”外的mmu_notifier_invalidate_range_end()是å¯ä»¥çš„。å³ä½¿åšé¡µè¡¨æ›´æ–°çš„线程 +在释放页表é”åŽä½†åœ¨è°ƒç”¨mmu_notifier_invalidate_range_end()å‰è¢«æŠ¢å ,也是如æ¤ã€‚ diff --git a/Documentation/translations/zh_CN/vm/numa.rst b/Documentation/translations/zh_CN/vm/numa.rst new file mode 100644 index 000000000000..6af412b924ad --- /dev/null +++ b/Documentation/translations/zh_CN/vm/numa.rst @@ -0,0 +1,101 @@ +:Original: Documentation/vm/numa.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +始于1999å¹´11月,作者: <kanoj@sgi.com> + +========================== +何为éžç»Ÿä¸€å†…å˜è®¿é—®(NUMA)? +========================== + +这个问题å¯ä»¥ä»Žå‡ 个视角æ¥å›žç”:硬件观点和Linux软件视角。 + +从硬件角度看,NUMA系统是一个由多个组件或装é…组æˆçš„计算机平å°ï¼Œæ¯ä¸ªç»„件å¯èƒ½åŒ…å«0个或更多的CPU〠+本地内å˜å’Œ/或IO总线。为了简æ´èµ·è§ï¼Œå¹¶å°†è¿™äº›ç‰©ç†ç»„件/装é…的硬件视角与软件抽象区分开æ¥ï¼Œæˆ‘们在 +本文ä¸ç§°è¿™äº›ç»„件/装é…为“å•å…ƒâ€ã€‚ + +æ¯ä¸ªâ€œå•å…ƒâ€éƒ½å¯ä»¥çœ‹ä½œæ˜¯ç³»ç»Ÿçš„一个SMP[对称多处ç†å™¨]å集——尽管独立的SMP系统所需的一些组件å¯èƒ½ +ä¸ä¼šåœ¨ä»»ä½•ç»™å®šçš„å•å…ƒä¸Šå¡«å……。NUMA系统的å•å…ƒé€šè¿‡æŸç§ç³»ç»Ÿäº’连连接在一起——例如,交å‰å¼€å…³æˆ–点对点 +链接是NUMA系统互连的常è§ç±»åž‹ã€‚这两ç§ç±»åž‹çš„互连都å¯ä»¥èšåˆèµ·æ¥ï¼Œä»¥åˆ›å»ºNUMAå¹³å°ï¼Œå…¶ä¸çš„å•å…ƒä¸Žå…¶ +ä»–å•å…ƒæœ‰å¤šä¸ªè·ç¦»ã€‚ + +对于Linux,感兴趣的NUMAå¹³å°ä¸»è¦æ˜¯æ‰€è°“的缓å˜ç›¸å¹²NUMA--简称ccNUMA系统系统。在ccNUMA系统ä¸ï¼Œ +所有的内å˜éƒ½æ˜¯å¯è§çš„,并且å¯ä»¥ä»Žè¿žæŽ¥åˆ°ä»»ä½•å•å…ƒçš„任何CPUä¸è®¿é—®ï¼Œç¼“å˜ä¸€è‡´æ€§æ˜¯ç”±å¤„ç†å™¨ç¼“å˜å’Œ/或 +系统互连在硬件ä¸å¤„ç†ã€‚ + +内å˜è®¿é—®æ—¶é—´å’Œæœ‰æ•ˆçš„内å˜å¸¦å®½å–决于包å«CPUçš„å•å…ƒæˆ–进行内å˜è®¿é—®çš„IO总线è·ç¦»åŒ…å«ç›®æ ‡å†…å˜çš„å•å…ƒ +有多远。例如,连接到åŒä¸€å•å…ƒçš„CPU对内å˜çš„访问将比访问其他远程å•å…ƒçš„内å˜ç»åŽ†æ›´å¿«çš„访问时间和 +更高的带宽。 NUMAå¹³å°å¯ä»¥åœ¨ä»»ä½•ç»™å®šå•å…ƒä¸Šè®¿é—®å¤šç§è¿œç¨‹è·ç¦»çš„(其他)å•å…ƒã€‚ + +å¹³å°ä¾›åº”商建立NUMA系统并ä¸åªæ˜¯ä¸ºäº†è®©è½¯ä»¶å¼€å‘人员的生活å˜å¾—有趣。相å,这ç§æž¶æž„是æä¾›å¯æ‰©å±• +内å˜å¸¦å®½çš„一ç§æ‰‹æ®µã€‚然而,为了实现å¯æ‰©å±•çš„内å˜å¸¦å®½ï¼Œç³»ç»Ÿå’Œåº”用软件必须安排大部分的内å˜å¼•ç”¨ +[cache misses]到“本地â€å†…å˜â€”—åŒä¸€å•å…ƒçš„内å˜ï¼Œå¦‚果有的è¯â€”—或者到最近的有内å˜çš„å•å…ƒã€‚ + +这就自然而然有了Linux软件对NUMA系统的视角: + +Linux将系统的硬件资æºåˆ’分为多个软件抽象,称为“节点â€ã€‚Linuxå°†èŠ‚ç‚¹æ˜ å°„åˆ°ç¡¬ä»¶å¹³å°çš„物ç†å•å…ƒ +上,对一些架构的细节进行了抽象。与物ç†å•å…ƒä¸€æ ·ï¼Œè½¯ä»¶èŠ‚点å¯èƒ½åŒ…å«0或更多的CPUã€å†…å˜å’Œ/或IO +总线。åŒæ ·ï¼Œå¯¹â€œè¾ƒè¿‘â€èŠ‚点的内å˜è®¿é—®â€”â€”æ˜ å°„åˆ°è¾ƒè¿‘å•å…ƒçš„节点——通常会比对较远å•å…ƒçš„访问ç»åŽ†æ›´å¿« +的访问时间和更高的有效带宽。 + +对于一些架构,如x86,Linux将“éšè—â€ä»»ä½•ä»£è¡¨æ²¡æœ‰å†…å˜è¿žæŽ¥çš„物ç†å•å…ƒçš„节点,并将连接到该å•å…ƒ +的任何CPUé‡æ–°åˆ†é…到代表有内å˜çš„å•å…ƒçš„èŠ‚ç‚¹ä¸Šã€‚å› æ¤ï¼Œåœ¨è¿™äº›æž¶æž„上,我们ä¸èƒ½å‡è®¾Linux将所有 +çš„CPU与一个给定的节点相关è”,会看到相åŒçš„本地内å˜è®¿é—®æ—¶é—´å’Œå¸¦å®½ã€‚ + +æ¤å¤–,对于æŸäº›æž¶æž„,åŒæ ·ä»¥x86为例,Linux支æŒå¯¹é¢å¤–节点的仿真。对于NUMA仿真,Linux会将现 +有的节点或者éžNUMAå¹³å°çš„系统内å˜åˆ†å‰²æˆå¤šä¸ªèŠ‚点。æ¯ä¸ªæ¨¡æ‹Ÿçš„节点将管ç†åº•å±‚å•å…ƒç‰©ç†å†…å˜çš„一部 +分。NUMA仿真对于在éžNUMAå¹³å°ä¸Šæµ‹è¯•NUMAå†…æ ¸å’Œåº”ç”¨åŠŸèƒ½æ˜¯éžå¸¸æœ‰ç”¨çš„,当与cpusets一起使用时, +å¯ä»¥ä½œä¸ºä¸€ç§å†…å˜èµ„æºç®¡ç†æœºåˆ¶ã€‚[è§ Documentation/admin-guide/cgroup-v1/cpusets.rst] + +对于æ¯ä¸ªæœ‰å†…å˜çš„节点,Linux构建了一个独立的内å˜ç®¡ç†å系统,有自己的空闲页列表ã€ä½¿ç”¨ä¸é¡µåˆ—表〠+使用统计和é”æ¥è°ƒè§£è®¿é—®ã€‚æ¤å¤–,Linux为æ¯ä¸ªå†…å˜åŒº[DMAã€DMA32ã€NORMALã€HIGH_MEMORYã€MOVABLE +ä¸çš„一个或多个]构建了一个有åºçš„“区列表â€ã€‚zonelist指定了当一个选定的区/节点ä¸èƒ½æ»¡è¶³åˆ†é…请求 +æ—¶è¦è®¿é—®çš„区/节点。当一个区没有å¯ç”¨çš„内å˜æ¥æ»¡è¶³è¯·æ±‚时,这ç§æƒ…况被称为“overflow 溢出â€æˆ– +“fallback 回退â€ã€‚ + +由于一些节点包å«å¤šä¸ªåŒ…å«ä¸åŒç±»åž‹å†…å˜çš„区,Linux必须决定是å¦å¯¹åŒºåˆ—表进行排åºï¼Œä½¿åˆ†é…回退到ä¸åŒ +节点上的相åŒåŒºç±»åž‹ï¼Œæˆ–åŒä¸€èŠ‚点上的ä¸åŒåŒºç±»åž‹ã€‚这是一个é‡è¦çš„è€ƒè™‘å› ç´ ï¼Œå› ä¸ºæœ‰äº›åŒºï¼Œå¦‚DMA或DMA32, +代表了相对稀缺的资æºã€‚Linux选择了一个默认的Node ordered zonelist。这æ„味ç€åœ¨ä½¿ç”¨æŒ‰NUMAè· +离排åºçš„远程节点之å‰ï¼Œå®ƒä¼šå°è¯•å›žé€€åˆ°åŒä¸€èŠ‚点的其他分区。 + +默认情况下,Linux会å°è¯•ä»Žæ‰§è¡Œè¯·æ±‚çš„CPU被分é…到的节点ä¸æ»¡è¶³å†…å˜åˆ†é…请求。具体æ¥è¯´ï¼ŒLinux将试 +图从请求æ¥æºçš„节点的适当分区列表ä¸çš„第一个节点进行分é…。这被称为“本地分é…â€ã€‚如果“本地â€èŠ‚点ä¸èƒ½ +æ»¡è¶³è¯·æ±‚ï¼Œå†…æ ¸å°†æ£€æŸ¥æ‰€é€‰åˆ†åŒºåˆ—è¡¨ä¸å…¶ä»–节点的区域,寻找列表ä¸ç¬¬ä¸€ä¸ªèƒ½æ»¡è¶³è¯·æ±‚的区域。 + +本地分é…将倾å‘于ä¿æŒå¯¹åˆ†é…的内å˜çš„åŽç»è®¿é—® “本地â€çš„底层物ç†èµ„æºå’Œç³»ç»Ÿäº’连——åªè¦å†…æ ¸ä»£è¡¨å…¶åˆ†é… +一些内å˜çš„任务åŽæ¥ä¸ä»Žè¯¥å†…å˜è¿ç§»ã€‚Linux调度器知é“å¹³å°çš„NUMA拓扑结构——体现在“调度域â€æ•°æ®ç»“æž„ +ä¸[è§ Documentation/scheduler/sched-domains.rst]——并且调度器试图尽é‡å‡å°‘任务è¿ç§»åˆ°é¥ +远的调度域ä¸ã€‚然而,调度器并没有直接考虑到任务的NUMAè¶³è¿¹ã€‚å› æ¤ï¼Œåœ¨å……分ä¸å¹³è¡¡çš„æƒ…å†µä¸‹ï¼Œä»»åŠ¡å¯ +以在节点之间è¿ç§»ï¼Œè¿œç¦»å…¶åˆå§‹èŠ‚ç‚¹å’Œå†…æ ¸æ•°æ®ç»“构。 + +系统管ç†å‘˜å’Œåº”用程åºè®¾è®¡è€…å¯ä»¥ä½¿ç”¨å„ç§CPU亲和命令行接å£ï¼Œå¦‚taskset(1)å’Œnumactl(1),以åŠç¨‹ +åºæŽ¥å£ï¼Œå¦‚sched_setaffinity(2),æ¥é™åˆ¶ä»»åŠ¡çš„è¿ç§»ï¼Œä»¥æ”¹å–„NUMA定ä½ã€‚æ¤å¤–,人们å¯ä»¥ä½¿ç”¨ +Linux NUMA内å˜ç–ç•¥ä¿®æ”¹å†…æ ¸çš„é»˜è®¤æœ¬åœ°åˆ†é…行为。 [è§ +:ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`]. + +系统管ç†å‘˜å¯ä»¥ä½¿ç”¨æŽ§åˆ¶ç»„å’ŒCPUsetsé™åˆ¶éžç‰¹æƒç”¨æˆ·åœ¨è°ƒåº¦æˆ–NUMA命令和功能ä¸å¯ä»¥æŒ‡å®šçš„CPU和节点 +的内å˜ã€‚ [è§ Documentation/admin-guide/cgroup-v1/cpusets.rst] + +在ä¸éšè—æ— å†…å˜èŠ‚点的架构上,Linux会在分区列表ä¸åªåŒ…括有内å˜çš„区域[节点]。这æ„味ç€å¯¹äºŽä¸€ä¸ªæ— +内å˜çš„节点,“本地内å˜èŠ‚点â€â€”—CPU节点的分区列表ä¸çš„第一个区域的节点——将ä¸æ˜¯èŠ‚点本身。相å,它 +å°†æ˜¯å†…æ ¸åœ¨å»ºç«‹åˆ†åŒºåˆ—è¡¨æ—¶é€‰æ‹©çš„ç¦»å®ƒæœ€è¿‘çš„æœ‰å†…å˜çš„节点。所以,默认情况下,本地分é…å°†ç”±å†…æ ¸æä¾› +最近的å¯ç”¨å†…å˜æ¥å®Œæˆã€‚这是åŒä¸€æœºåˆ¶çš„结果,该机制å…许这ç§åˆ†é…在一个包å«å†…å˜çš„节点溢出时回退到 +其他附近的节点。 + +ä¸€äº›å†…æ ¸åˆ†é…ä¸å¸Œæœ›æˆ–ä¸èƒ½å®¹å¿è¿™ç§åˆ†é…回退行为。相å,他们想确ä¿ä»–们从指定的节点获得内å˜ï¼Œæˆ–者 +得到通知说该节点没有空闲内å˜ã€‚例如,当一个å系统分é…æ¯ä¸ªCPU的内å˜èµ„æºæ—¶ï¼Œé€šå¸¸æ˜¯è¿™ç§æƒ…况。 + +一个典型的分é…模å¼æ˜¯ä½¿ç”¨å†…æ ¸çš„numa_node_id()或CPU_to_node()函数获得“当å‰CPUâ€æ‰€åœ¨èŠ‚点的 +节点ID,然åŽåªä»Žè¿”回的节点ID请求内å˜ã€‚å½“è¿™æ ·çš„åˆ†é…失败时,请求的å系统å¯ä»¥æ¢å¤åˆ°å®ƒè‡ªå·±çš„回退 +路径。æ¿å—å†…æ ¸å†…å˜åˆ†é…å™¨å°±æ˜¯è¿™æ ·çš„ä¸€ä¸ªä¾‹å。或者,å系统å¯ä»¥é€‰æ‹©åœ¨åˆ†é…失败时ç¦ç”¨æˆ–ä¸å¯ç”¨è‡ªå·±ã€‚ +å†…æ ¸åˆ†æžåç³»ç»Ÿå°±æ˜¯è¿™æ ·çš„ä¸€ä¸ªä¾‹å。 + +如果架构支æŒâ€”—ä¸éšè—æ— å†…å˜èŠ‚ç‚¹ï¼Œé‚£ä¹ˆè¿žæŽ¥åˆ°æ— å†…å˜èŠ‚点的CPU将总是产生回退路径的开销,或者一些 +åç³»ç»Ÿå¦‚æžœè¯•å›¾å®Œå…¨ä»Žæ— å†…å˜çš„节点分é…内å˜ï¼Œå°†æ— 法åˆå§‹åŒ–。为了é€æ˜Žåœ°æ”¯æŒè¿™ç§æž¶æž„ï¼Œå†…æ ¸åç³»ç»Ÿå¯ +以使用numa_mem_id()或cpu_to_mem()函数æ¥å®šä½è°ƒç”¨æˆ–指定CPU的“本地内å˜èŠ‚点â€ã€‚åŒæ ·ï¼Œè¿™æ˜¯åŒ +一个节点,默认的本地页分é…将从这个节点开始å°è¯•ã€‚ diff --git a/Documentation/translations/zh_CN/vm/overcommit-accounting.rst b/Documentation/translations/zh_CN/vm/overcommit-accounting.rst new file mode 100644 index 000000000000..8765cb118f24 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/overcommit-accounting.rst @@ -0,0 +1,86 @@ +:Original: Documentation/vm/overcommit-accounting.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + + +============== +超é‡ä½¿ç”¨å®¡è®¡ +============== + +Linuxå†…æ ¸æ”¯æŒä¸‹åˆ—超é‡ä½¿ç”¨å¤„ç†æ¨¡å¼ + +0 + å¯å‘å¼è¶…é‡ä½¿ç”¨å¤„ç†ã€‚æ‹’ç»æ˜Žæ˜¾çš„地å€ç©ºé—´è¶…é‡ä½¿ç”¨ã€‚用于一个典型的系统。 + 它确ä¿ä¸¥é‡çš„疯狂分é…失败,åŒæ—¶å…许超é‡ä½¿ç”¨ä»¥å‡å°‘swap的使用。在这ç§æ¨¡å¼ä¸‹ï¼Œ + å…许root分é…ç¨å¤šçš„内å˜ã€‚这是默认的。 +1 + 总是超é‡ä½¿ç”¨ã€‚适用于一些科å¦åº”用。ç»å…¸çš„例å是使用稀ç–数组的代ç ,åªæ˜¯ä¾èµ– + å‡ ä¹Žå®Œå…¨ç”±é›¶é¡µç»„æˆçš„è™šæ‹Ÿå†…å˜ + +2 + ä¸è¶…é‡ä½¿ç”¨ã€‚系统æ交的总地å€ç©ºé—´ä¸å…许超过swap+一个å¯é…置的物ç†RAMçš„æ•°é‡ + (默认为50%ï¼‰ã€‚æ ¹æ®ä½ 使用的数é‡ï¼Œåœ¨å¤§å¤šæ•°æƒ…况下,这æ„味ç€ä¸€ä¸ªè¿›ç¨‹åœ¨è®¿é—®é¡µé¢æ—¶ + ä¸ä¼šè¢«æ€æ»ï¼Œä½†ä¼šåœ¨å†…å˜åˆ†é…上收到相应的错误。 + + 对于那些想ä¿è¯ä»–们的内å˜åˆ†é…在未æ¥å¯ç”¨è€Œåˆä¸éœ€è¦åˆå§‹åŒ–æ¯ä¸€ä¸ªé¡µé¢çš„应用程åºæ¥è¯´ + 是很有用的。 + +超é‡ä½¿ç”¨ç–略是通过sysctl `vm.overcommit_memory` 设置的。 + +å¯ä»¥é€šè¿‡ `vm.overcommit_ratio` (百分比)或 `vm.overcommit_kbytes` (ç»å¯¹å€¼ï¼‰ +æ¥è®¾ç½®è¶…é™æ•°é‡ã€‚这些åªæœ‰åœ¨ `vm.overcommit_memory` 被设置为2æ—¶æ‰æœ‰æ•ˆæžœã€‚ + +在 ``/proc/meminfo`` ä¸å¯ä»¥åˆ†åˆ«ä»¥CommitLimitå’ŒCommitted_ASçš„å½¢å¼æŸ¥çœ‹å½“å‰ +的超é‡ä½¿ç”¨å’Œæ交é‡ã€‚ + +陷阱 +==== + +Cè¯è¨€çš„å †æ ˆå¢žé•¿æ˜¯ä¸€ä¸ªéšå«çš„mremapã€‚å¦‚æžœä½ æƒ³å¾—åˆ°ç»å¯¹çš„ä¿è¯ï¼Œå¹¶åœ¨æŽ¥è¿‘边缘的地方è¿è¡Œï¼Œ +ä½ **å¿…é¡»** ä¸ºä½ è®¤ä¸ºä½ éœ€è¦çš„æœ€å¤§å°ºå¯¸çš„å †æ ˆè¿›è¡Œmmapã€‚å¯¹äºŽå…¸åž‹çš„å †æ ˆä½¿ç”¨æ¥è¯´ï¼Œè¿™å¹¶ +ä¸é‡è¦ï¼Œä½†å¦‚æžœä½ çœŸçš„éžå¸¸å…³å¿ƒçš„è¯ï¼Œè¿™å°±æ˜¯ä¸€ä¸ªå€¼å¾—关注的案例。 + + +在模å¼2ä¸ï¼ŒMAP_NORESERVEæ ‡å¿—è¢«å¿½ç•¥ã€‚ + + +它是如何工作的 +============== + +超é‡ä½¿ç”¨æ˜¯åŸºäºŽä»¥ä¸‹è§„则 + +å¯¹äºŽæ–‡ä»¶æ˜ å°„ + | SHARED or READ-only - 0 cost (è¯¥æ–‡ä»¶æ˜¯æ˜ å°„è€Œä¸æ˜¯äº¤æ¢) + | PRIVATE WRITABLE - æ¯ä¸ªå®žä¾‹çš„æ˜ å°„å¤§å° + +对于匿å或者 ``/dev/zero`` æ˜ å°„ + | SHARED - æ˜ å°„çš„å¤§å° + | PRIVATE READ-only - 0 cost (但作用ä¸å¤§) + | PRIVATE WRITABLE - æ¯ä¸ªå®žä¾‹çš„æ˜ å°„å¤§å° + +é¢å¤–的计数 + | 通过mmap制作å¯å†™å‰¯æœ¬çš„é¡µé¢ + | 从åŒä¸€æ± ä¸æå–çš„shmfså†…å˜ + +çŠ¶æ€ +==== + +* æˆ‘ä»¬æ ¸ç®—mmap内å˜æ˜ å°„ +* æˆ‘ä»¬æ ¸ç®—mprotect在æ交ä¸çš„å˜åŒ– +* æˆ‘ä»¬æ ¸ç®—mremap的大å°å˜åŒ– +* 我们的审计 brk +* 审计munmap +* 我们在/procä¸æŠ¥å‘Šcommit çŠ¶æ€ +* æ ¸å¯¹å¹¶æ£€æŸ¥åˆ†å‰çš„情况 +* å®¡æŸ¥å †æ ˆå¤„ç†/执行ä¸çš„构建 +* å™è¿°SHMfs的情况 +* 实现实际é™åˆ¶çš„执行 + +å¾…ç» +==== +* ptrace 页计数(这很难)。 diff --git a/Documentation/translations/zh_CN/vm/page_frags.rst b/Documentation/translations/zh_CN/vm/page_frags.rst new file mode 100644 index 000000000000..ad27fed33634 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/page_frags.rst @@ -0,0 +1,38 @@ +:Original: Documentation/vm/page_frag.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +======== +页é¢ç‰‡æ®µ +======== + +一个页é¢ç‰‡æ®µæ˜¯ä¸€ä¸ªä»»æ„长度的任æ„å移的内å˜åŒºåŸŸï¼Œå®ƒä½äºŽä¸€ä¸ª0或更高阶的å¤åˆé¡µé¢ä¸ã€‚ +该页ä¸çš„多个碎片在该页的引用计数器ä¸è¢«å•ç‹¬è®¡ç®—。 + +page_frag函数,page_frag_allocå’Œpage_frag_free,为页é¢ç‰‡æ®µæä¾›äº†ä¸€ä¸ªç®€å• +的分é…æ¡†æž¶ã€‚è¿™è¢«ç½‘ç»œå †æ ˆå’Œç½‘ç»œè®¾å¤‡é©±åŠ¨ä½¿ç”¨ï¼Œä»¥æ供一个内å˜çš„支æŒåŒºåŸŸï¼Œä½œä¸º +sk_buff->head使用,或者用于skb_shared_infoçš„ “frags†部分。 + +为了使用页é¢ç‰‡æ®µAPI,需è¦ä¸€ä¸ªæ”¯æŒé¡µé¢ç‰‡æ®µçš„缓冲区。这为碎片分é…æ供了一个ä¸å¿ƒç‚¹ï¼Œ +并å…许多个调用使用一个缓å˜çš„页é¢ã€‚è¿™æ ·åšçš„好处是å¯ä»¥é¿å…对get_page的多次调用, +这在分é…时开销å¯èƒ½ä¼šå¾ˆå¤§ã€‚然而,由于这ç§ç¼“å˜çš„性质,è¦æ±‚任何对缓å˜çš„调用都è¦å—åˆ°æ¯ +个CPUçš„é™åˆ¶ï¼Œæˆ–者æ¯ä¸ªCPUçš„é™åˆ¶ï¼Œå¹¶åœ¨æ‰§è¡Œç¢Žç‰‡åˆ†é…时强制ç¦æ¢ä¸æ–。 + +ç½‘ç»œå †æ ˆåœ¨æ¯ä¸ªCPU使用两个独立的缓å˜æ¥å¤„ç†ç¢Žç‰‡åˆ†é…。netdev_alloc_cache被使用 +netdev_alloc_fragå’Œ__netdev_alloc_skb调用的调用者使用。napi_alloc_cache +被调用__napi_alloc_fragå’Œ__napi_alloc_skb的调用者使用。这两个调用的主è¦åŒºåˆ«æ˜¯ +它们å¯èƒ½è¢«è°ƒç”¨çš„环境。“netdev†å‰ç¼€çš„函数å¯ä»¥åœ¨ä»»ä½•ä¸Šä¸‹æ–‡ä¸ä½¿ç”¨ï¼Œå› 为这些函数 +å°†ç¦ç”¨ä¸æ–,而 â€napi“ å‰ç¼€çš„函数åªå¯ä»¥åœ¨softirq上下文ä¸ä½¿ç”¨ã€‚ + +许多网络设备驱动程åºä½¿ç”¨ç±»ä¼¼çš„方法æ¥åˆ†é…页é¢ç‰‡æ®µï¼Œä½†é¡µé¢ç‰‡æ®µæ˜¯åœ¨çŽ¯æˆ–æ述符级别上 +缓å˜çš„。为了实现这些情况,有必è¦æ供一ç§æ‹†è§£é¡µé¢ç¼“å˜çš„é€šç”¨æ–¹æ³•ã€‚å‡ºäºŽè¿™ä¸ªåŽŸå› ï¼Œ +__page_frag_cache_drain被实现了。它å…许通过一次调用从一个页é¢é‡Šæ”¾å¤šä¸ªå¼•ç”¨ã€‚ +è¿™æ ·åšçš„好处是,它å…许清ç†è¢«æ·»åŠ 到一个页é¢çš„多个引用,以é¿å…æ¯æ¬¡åˆ†é…都调用 +get_page。 + +Alexander Duyck,2016å¹´11月29日。 diff --git a/Documentation/translations/zh_CN/vm/page_owner.rst b/Documentation/translations/zh_CN/vm/page_owner.rst new file mode 100644 index 000000000000..9e951fabba9d --- /dev/null +++ b/Documentation/translations/zh_CN/vm/page_owner.rst @@ -0,0 +1,116 @@ +:Original: Documentation/vm/page_owner.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +================================ +page owner: 跟踪è°åˆ†é…çš„æ¯ä¸ªé¡µé¢ +================================ + +概述 +==== + +page owner是用æ¥è¿½è¸ªè°åˆ†é…çš„æ¯ä¸€ä¸ªé¡µé¢ã€‚它å¯ä»¥ç”¨æ¥è°ƒè¯•å†…å˜æ³„æ¼æˆ–找到内å˜å 用者。 +当分é…å‘生时,有关分é…çš„ä¿¡æ¯ï¼Œå¦‚è°ƒç”¨å †æ ˆå’Œé¡µé¢çš„顺åºè¢«å˜å‚¨åˆ°æ¯ä¸ªé¡µé¢çš„特定å˜å‚¨ä¸ã€‚ +当我们需è¦äº†è§£æ‰€æœ‰é¡µé¢çš„状æ€æ—¶ï¼Œæˆ‘们å¯ä»¥èŽ·å¾—并分æžè¿™äº›ä¿¡æ¯ã€‚ + +尽管我们已ç»æœ‰äº†è¿½è¸ªé¡µé¢åˆ†é…/释放的tracepoint,但用它æ¥åˆ†æžè°åˆ†é…çš„æ¯ä¸ªé¡µé¢æ˜¯ +相当å¤æ‚的。我们需è¦æ‰©å¤§è·Ÿè¸ªç¼“冲区,以防æ¢åœ¨ç”¨æˆ·ç©ºé—´ç¨‹åºå¯åŠ¨å‰å‡ºçŽ°é‡å ã€‚è€Œä¸”ï¼Œå¯ +动的程åºä¼šä¸æ–地将跟踪缓冲区转出,供以åŽåˆ†æžï¼Œè¿™å°†ä¼šæ”¹å˜ç³»ç»Ÿçš„行为,会产生更多的 +å¯èƒ½æ€§ï¼Œè€Œä¸æ˜¯ä»…ä»…ä¿ç•™åœ¨å†…å˜ä¸ï¼Œæ‰€ä»¥ä¸åˆ©äºŽè°ƒè¯•ã€‚ + +页é¢æ‰€æœ‰è€…也å¯ä»¥ç”¨äºŽå„ç§ç›®çš„。例如,å¯ä»¥é€šè¿‡æ¯ä¸ªé¡µé¢çš„gfpæ ‡å¿—ä¿¡æ¯èŽ·å¾—精确的碎片 +统计。如果å¯ç”¨äº†page owner,它就已ç»å®žçŽ°å¹¶æ¿€æ´»äº†ã€‚我们éžå¸¸æ¬¢è¿Žå…¶ä»–用途。 + +page owner在默认情况下是ç¦ç”¨çš„ã€‚æ‰€ä»¥ï¼Œå¦‚æžœä½ æƒ³ä½¿ç”¨å®ƒï¼Œä½ éœ€è¦åœ¨ä½ çš„å¯åŠ¨cmdline +ä¸åŠ å…¥"page_owner=on"ã€‚å¦‚æžœå†…æ ¸æ˜¯ç”¨page owner构建的,并且由于没有å¯ç”¨å¯åŠ¨ +选项而在è¿è¡Œæ—¶ç¦ç”¨page owner,那么è¿è¡Œæ—¶çš„开销是很å°çš„。如果在è¿è¡Œæ—¶ç¦ç”¨ï¼Œå®ƒä¸ +需è¦å†…å˜æ¥å˜å‚¨æ‰€æœ‰è€…ä¿¡æ¯ï¼Œæ‰€ä»¥æ²¡æœ‰è¿è¡Œæ—¶å†…å˜å¼€é”€ã€‚而且,页é¢æ‰€æœ‰è€…在页é¢åˆ†é…器的 +çƒè·¯å¾„ä¸åªæ’入了两个ä¸å¯èƒ½çš„分支,如果ä¸å¯ç”¨ï¼Œé‚£ä¹ˆåˆ†é…就会åƒæ²¡æœ‰é¡µé¢æ‰€æœ‰è€…çš„å†…æ ¸ +ä¸€æ ·è¿›è¡Œã€‚è¿™ä¸¤ä¸ªä¸å¯èƒ½çš„分支应该ä¸ä¼šå½±å“到分é…的性能,特别是在é™æ€é”®è·³è½¬æ ‡ç¾ä¿®è¡¥ +功能å¯ç”¨çš„æƒ…å†µä¸‹ã€‚ä»¥ä¸‹æ˜¯ç”±äºŽè¿™ä¸ªåŠŸèƒ½è€Œå¯¼è‡´çš„å†…æ ¸ä»£ç 大å°çš„å˜åŒ–。 + +- 没有page owner:: + + text data bss dec hex filename + 48392 2333 644 51369 c8a9 mm/page_alloc.o + +- 有page owner:: + + text data bss dec hex filename + 48800 2445 644 51889 cab1 mm/page_alloc.o + 6662 108 29 6799 1a8f mm/page_owner.o + 1025 8 8 1041 411 mm/page_ext.o + +è™½ç„¶æ€»å…±å¢žåŠ äº†8KB的代ç ,但page_alloc.oå¢žåŠ äº†520å—节,其ä¸ä¸åˆ°ä¸€åŠæ˜¯åœ¨hotpath +ä¸ã€‚构建带有page ownerçš„å†…æ ¸ï¼Œå¹¶åœ¨éœ€è¦æ—¶æ‰“å¼€å®ƒï¼Œå°†æ˜¯è°ƒè¯•å†…æ ¸å†…å˜é—®é¢˜çš„最佳选择。 + +有一个问题是由实现细节引起的。页所有者将信æ¯å˜å‚¨åˆ°struct page扩展的内å˜ä¸ã€‚è¿™ +个内å˜çš„åˆå§‹åŒ–时间比稀ç–内å˜ç³»ç»Ÿä¸çš„页é¢åˆ†é…器å¯åŠ¨çš„时间è¦æ™šä¸€äº›ï¼Œæ‰€ä»¥ï¼Œåœ¨åˆå§‹åŒ– +之å‰ï¼Œè®¸å¤šé¡µé¢å¯ä»¥è¢«åˆ†é…,但它们没有所有者信æ¯ã€‚为了解决这个问题,这些早期分é…çš„ +页é¢åœ¨åˆå§‹åŒ–é˜¶æ®µè¢«è°ƒæŸ¥å¹¶æ ‡è®°ä¸ºåˆ†é…。虽然这并ä¸æ„味ç€å®ƒä»¬æœ‰æ£ç¡®çš„所有者信æ¯ï¼Œä½†è‡³ +少,我们å¯ä»¥æ›´å‡†ç¡®åœ°åˆ¤æ–该页是å¦è¢«åˆ†é…。在2GB内å˜çš„x86-64虚拟机上,有13343 +个早期分é…的页é¢è¢«æ•æ‰å’Œæ ‡è®°ï¼Œå°½ç®¡å®ƒä»¬å¤§éƒ¨åˆ†æ˜¯ç”±ç»“构页扩展功能分é…的。总之,在这 +之åŽï¼Œæ²¡æœ‰ä»»ä½•é¡µé¢å¤„于未追踪状æ€ã€‚ + +使用方法 +======== + +1) 构建用户空间的帮助:: + + cd tools/vm + make page_owner_sort + +2) å¯ç”¨page owner: æ·»åŠ "page_owner=on" 到 boot cmdline. + +3) åšä½ 想调试的工作。 + +4) 分æžæ¥è‡ªé¡µé¢æ‰€æœ‰è€…çš„ä¿¡æ¯:: + + cat /sys/kernel/debug/page_owner > page_owner_full.txt + ./page_owner_sort page_owner_full.txt sorted_page_owner.txt + + ``page_owner_full.txt`` 的一般输出情况如下(输出信æ¯æ— 翻译价值):: + + Page allocated via order XXX, ... + PFN XXX ... + // Detailed stack + + Page allocated via order XXX, ... + PFN XXX ... + // Detailed stack + + ``page_owner_sort`` 工具忽略了 ``PFN`` 行,将剩余的行放在bufä¸ï¼Œä½¿ç”¨regexpæ + å–页åºå€¼ï¼Œè®¡ç®—buf的次数和页数,最åŽæ ¹æ®å‚数进行排åºã€‚ + + 在 ``sorted_page_owner.txt`` ä¸å¯ä»¥çœ‹åˆ°å…³äºŽè°åˆ†é…了æ¯ä¸ªé¡µé¢çš„结果。一般输出:: + + XXX times, XXX pages: + Page allocated via order XXX, ... + // Detailed stack + + 默认情况下, ``page_owner_sort`` æ˜¯æ ¹æ®buf的时间æ¥æŽ’åºçš„ã€‚å¦‚æžœä½ æƒ³ + 按buf的页数排åºï¼Œè¯·ä½¿ç”¨-må‚数。详细的å‚数是: + + 基本函数: + + Sort: + -a 按内å˜åˆ†é…æ—¶é—´æŽ’åº + -m 按总内å˜æŽ’åº + -p 按pid排åºã€‚ + -P 按tgid排åºã€‚ + -r 按内å˜é‡Šæ”¾æ—¶é—´æŽ’åºã€‚ + -s æŒ‰å †æ ˆè·Ÿè¸ªæŽ’åºã€‚ + -t 按时间排åºï¼ˆé»˜è®¤ï¼‰ã€‚ + + 其它函数: + + Cull: + -c é€šè¿‡æ¯”è¾ƒå †æ ˆè·Ÿè¸ªè€Œä¸æ˜¯æ€»å—æ¥è¿›è¡Œå‰”除。 + + Filter: + -f 过滤掉内å˜å·²è¢«é‡Šæ”¾çš„å—çš„ä¿¡æ¯ã€‚ diff --git a/Documentation/translations/zh_CN/vm/page_table_check.rst b/Documentation/translations/zh_CN/vm/page_table_check.rst new file mode 100644 index 000000000000..a29fc1b360e6 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/page_table_check.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +:Original: Documentation/vm/page_table_check.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +======== +页表检查 +======== + +概述 +==== + +页表检查å…许通过确ä¿é˜²æ¢æŸäº›ç±»åž‹çš„内å˜æŸåæ¥å¼ºåŒ–å†…æ ¸ã€‚ + +当新的页é¢å¯ä»¥ä»Žç”¨æˆ·ç©ºé—´è®¿é—®æ—¶ï¼Œé¡µè¡¨æ£€æŸ¥é€šè¿‡å°†å®ƒä»¬çš„页表项(PTEs PMDç‰ï¼‰æ·»åŠ 到页表ä¸æ¥æ‰§è¡Œé¢å¤– +的验è¯ã€‚ + +在检测到æŸåçš„æƒ…å†µä¸‹ï¼Œå†…æ ¸ä¼šè¢«å´©æºƒã€‚é¡µè¡¨æ£€æŸ¥æœ‰ä¸€ä¸ªå°çš„性能和内å˜å¼€é”€ã€‚å› æ¤ï¼Œå®ƒåœ¨é»˜è®¤æƒ…况下是ç¦ç”¨ +的,但是在é¢å¤–çš„åŠ å›ºè¶…è¿‡æ€§èƒ½æˆæœ¬çš„系统上,å¯ä»¥é€‰æ‹©å¯ç”¨ã€‚å¦å¤–,由于页表检查是åŒæ¥çš„,它å¯ä»¥å¸®åŠ©è°ƒ +试åŒæ˜ 射内å˜æŸåé—®é¢˜ï¼Œåœ¨é”™è¯¯çš„æ˜ å°„å‘ç”Ÿæ—¶å´©æºƒå†…æ ¸ï¼Œè€Œä¸æ˜¯åœ¨å†…å˜æŸå错误å‘生åŽå†…æ ¸å´©æºƒã€‚ + +åŒé‡æ˜ 射检测逻辑 +================ + ++-------------------+-------------------+-------------------+------------------+ +| Current Mapping | New mapping | Permissions | Rule | ++===================+===================+===================+==================+ +| Anonymous | Anonymous | Read | Allow | ++-------------------+-------------------+-------------------+------------------+ +| Anonymous | Anonymous | Read / Write | Prohibit | ++-------------------+-------------------+-------------------+------------------+ +| Anonymous | Named | Any | Prohibit | ++-------------------+-------------------+-------------------+------------------+ +| Named | Anonymous | Any | Prohibit | ++-------------------+-------------------+-------------------+------------------+ +| Named | Named | Any | Allow | ++-------------------+-------------------+-------------------+------------------+ + +å¯ç”¨é¡µè¡¨æ£€æŸ¥ +============ + +ç”¨ä»¥ä¸‹æ–¹æ³•æž„å»ºå†…æ ¸: + +- PAGE_TABLE_CHECK=y + 注æ„,它åªèƒ½åœ¨ARCH_SUPPORTS_PAGE_TABLE_CHECKå¯ç”¨çš„å¹³å°ä¸Šå¯ç”¨ã€‚ + +- 使用 "page_table_check=on" å†…æ ¸å‚æ•°å¯åŠ¨ã€‚ + +å¯ä»¥é€‰æ‹©ç”¨PAGE_TABLE_CHECK_ENFORCEDæ¥æž„å»ºå†…æ ¸ï¼Œä»¥ä¾¿åœ¨æ²¡æœ‰é¢å¤–çš„å†…æ ¸å‚数的情况下获得页表 +支æŒã€‚ diff --git a/Documentation/translations/zh_CN/vm/remap_file_pages.rst b/Documentation/translations/zh_CN/vm/remap_file_pages.rst new file mode 100644 index 000000000000..af6b7e28af23 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/remap_file_pages.rst @@ -0,0 +1,32 @@ +:Original: Documentation/vm/remap_file_pages.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +============================== +remap_file_pages()系统调用 +============================== + +remap_file_pages()系统调用被用æ¥åˆ›å»ºä¸€ä¸ªéžçº¿æ€§æ˜ å°„ï¼Œä¹Ÿå°±æ˜¯è¯´ï¼Œåœ¨è¿™ä¸ªæ˜ å°„ä¸ï¼Œ +文件的页é¢è¢«æ— åºæ˜ 射到内å˜ä¸ã€‚使用remap_file_pages()比é‡å¤è°ƒç”¨mmap(2)的好 +处是,å‰è€…ä¸éœ€è¦å†…æ ¸åˆ›å»ºé¢å¤–çš„VMA(虚拟内å˜åŒºï¼‰æ•°æ®ç»“构。 + +支æŒéžçº¿æ€§æ˜ 射需è¦åœ¨å†…æ ¸è™šæ‹Ÿå†…å˜å系统ä¸ç¼–写大é‡çš„non-trivial的代ç ï¼ŒåŒ…æ‹¬çƒ +路径。å¦å¤–,为了使éžçº¿æ€§æ˜ å°„å·¥ä½œï¼Œå†…æ ¸éœ€è¦ä¸€ç§æ–¹æ³•æ¥åŒºåˆ†æ£å¸¸çš„页表项和带有文件 +å移的项(pte_fileï¼‰ã€‚å†…æ ¸ä¸ºè¾¾åˆ°è¿™ä¸ªç›®çš„åœ¨PTEä¸ä¿ç•™äº†æ ‡å¿—。PTEæ ‡å¿—æ˜¯ç¨€ç¼ºèµ„ +æºï¼Œç‰¹åˆ«æ˜¯åœ¨æŸäº›CPUæž¶æž„ä¸Šã€‚å¦‚æžœèƒ½è…¾å‡ºè¿™ä¸ªæ ‡å¿—ç”¨äºŽå…¶ä»–ç”¨é€”å°±æ›´å¥½äº†ã€‚ + +幸è¿çš„是,在生活ä¸å¹¶æ²¡æœ‰å¾ˆå¤šremap_file_pages()的用户。åªçŸ¥é“有一个ä¼ä¸šçš„RDBMS +实现在32ä½ç³»ç»Ÿä¸Šä½¿ç”¨è¿™ä¸ªç³»ç»Ÿè°ƒç”¨æ¥æ˜ 射比32ä½è™šæ‹Ÿåœ°å€ç©ºé—´çº¿æ€§å°ºå¯¸æ›´å¤§çš„文件。 +由于64ä½ç³»ç»Ÿçš„广泛使用,这ç§ä½¿ç”¨æƒ…况已ç»ä¸é‡è¦äº†ã€‚ + +syscall被废弃了,现在用一个模拟æ¥ä»£æ›¿å®ƒã€‚仿真会创建新的VMA,而ä¸æ˜¯éžçº¿æ€§æ˜ 射。 +对于remap_file_pages()的少数用户æ¥è¯´ï¼Œå®ƒçš„工作速度会å˜æ…¢ï¼Œä½†ABI被ä¿ç•™äº†ã€‚ + +仿真的一个副作用(除了性能之外)是,由于é¢å¤–çš„VMA,用户å¯ä»¥æ›´å®¹æ˜“达到 +vm.max_map_countçš„é™åˆ¶ã€‚关于é™åˆ¶çš„更多细节,请å‚è§DEFAULT_MAX_MAP_COUNT +的注释。 diff --git a/Documentation/translations/zh_CN/vm/split_page_table_lock.rst b/Documentation/translations/zh_CN/vm/split_page_table_lock.rst new file mode 100644 index 000000000000..50694d97c426 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/split_page_table_lock.rst @@ -0,0 +1,96 @@ +:Original: Documentation/vm/split_page_table_lock.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +================================= +分页表é”(split page table lock) +================================= + +最åˆï¼Œmm->page_table_lock spinlockä¿æŠ¤äº†mm_struct的所有页表。但是这ç§æ–¹ +法导致了多线程应用程åºçš„缺页异常å¯æ‰©å±•æ€§å·®ï¼Œå› 为对é”的争夺很激烈。为了æ高å¯æ‰© +展性,我们引入了分页表é”。 + +有了分页表é”,我们就有了å•ç‹¬çš„æ¯å¼ 表é”æ¥é¡ºåºåŒ–对表的访问。目å‰ï¼Œæˆ‘们对PTEå’Œ +PMD表使用分页é”。对高层表的访问由mm->page_table_lockä¿æŠ¤ã€‚ + +有一些辅助工具æ¥é”定/解é”一个表和其他访问器函数: + + - pte_offset_map_lock() + æ˜ å°„pte并获å–PTE表é”,返回所å–é”的指针; + - pte_unmap_unlock() + 解é”å’Œè§£æ˜ å°„PTE表; + - pte_alloc_map_lock() + 如果需è¦çš„è¯ï¼Œåˆ†é…PTE表并获å–é”,如果分é…失败,返回已获å–çš„é”的指针 + 或NULLï¼› + - pte_lockptr() + 返回指å‘PTE表é”的指针; + - pmd_lock() + å–å¾—PMD表é”,返回所å–é”的指针。 + - pmd_lockptr() + 返回指å‘PMD表é”的指针; + +如果CONFIG_SPLIT_PTLOCK_CPUS(通常为4)å°äºŽæˆ–ç‰äºŽNR_CPUS,则在编译 +æ—¶å¯ç”¨PTE表的分页表é”。如果分页é”被ç¦ç”¨ï¼Œæ‰€æœ‰çš„表都由mm->page_table_lock +æ¥ä¿æŠ¤ã€‚ + +如果PMD表å¯ç”¨äº†åˆ†é¡µé”,并且架构支æŒå®ƒï¼Œé‚£ä¹ˆPMD表的分页é”就会被å¯ç”¨ï¼ˆè§ +下文)。 + +Hugetlb å’Œåˆ†é¡µè¡¨é” +================== + +Hugetlbå¯ä»¥æ”¯æŒå¤šç§é¡µé¢å¤§å°ã€‚我们åªå¯¹PMD级别使用分页é”,但ä¸å¯¹PUD使用。 + +Hugetlb特定的辅助函数: + + - huge_pte_lock() + 对PMD_SIZE页é¢é‡‡å–pmd分割é”,å¦åˆ™mm->page_table_lockï¼› + - huge_pte_lockptr() + 返回指å‘表é”的指针。 + +架构对分页表é”çš„æ”¯æŒ +==================== + +没有必è¦ç‰¹åˆ«å¯ç”¨PTE分页表é”:所有需è¦çš„东西都由pgtable_pte_page_ctor() +å’Œpgtable_pte_page_dtor()完æˆï¼Œå®ƒä»¬å¿…须在PTE表分é…/释放时被调用。 + +ç¡®ä¿æž¶æž„ä¸ä½¿ç”¨slab分é…器æ¥åˆ†é…页表:slab使用page->slab_cacheæ¥åˆ†é…其页 +é¢ã€‚这个区域与page->ptl共享å˜å‚¨ã€‚ + +PMD分页é”åªæœ‰åœ¨ä½ 有两个以上的页表级别时æ‰æœ‰æ„义。 + +å¯ç”¨PMD分页é”需è¦åœ¨PMD表分é…时调用pgtable_pmd_page_ctor(),在释放时调 +用pgtable_pmd_page_dtor()。 + +分é…通常å‘生在pmd_alloc_one()ä¸ï¼Œé‡Šæ”¾å‘生在pmd_free()å’Œpmd_free_tlb() +ä¸ï¼Œä½†è¦ç¡®ä¿è¦†ç›–所有的PMD表分é…/释放路径:å³X86_PAE在pgd_alloc()ä¸é¢„å…ˆ +分é…一些PMD。 + +一切就绪åŽï¼Œä½ å¯ä»¥è®¾ç½®CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK。 + +注æ„:pgtable_pte_page_ctor()å’Œpgtable_pmd_page_ctor()å¯èƒ½å¤±è´¥--å¿… +é¡»æ£ç¡®å¤„ç†ã€‚ + +page->ptl +========= + +page->ptl用于访问分割页表é”,其ä¸'page'是包å«è¯¥è¡¨çš„页é¢struct page。它 +与page->private(以åŠunionä¸çš„å…¶ä»–å‡ ä¸ªå—段)共享å˜å‚¨ã€‚ + +为了é¿å…å¢žåŠ struct page的大å°å¹¶èŽ·å¾—最佳性能,我们使用了一个技巧: + + - 如果spinlock_t适åˆäºŽlong,我们使用page->ptr作为spinlockï¼Œè¿™æ ·æˆ‘ä»¬ + å°±å¯ä»¥é¿å…间接访问并节çœä¸€ä¸ªç¼“å˜è¡Œã€‚ + - 如果spinlock_t的大å°å¤§äºŽlong的大å°ï¼Œæˆ‘们使用page->ptl作为spinlock_t + 的指针并动æ€åˆ†é…它。这å…许在å¯ç”¨DEBUG_SPINLOCK或DEBUG_LOCK_ALLOCçš„ + 情况下使用分页é”,但由于间接访问而多花了一个缓å˜è¡Œã€‚ + +PTE表的spinlock_t分é…在pgtable_pte_page_ctor()ä¸ï¼ŒPMD表的spinlock_t +分é…在pgtable_pmd_page_ctor()ä¸ã€‚ + +请ä¸è¦ç›´æŽ¥è®¿é—®page->ptl - -使用适当的辅助函数。 diff --git a/Documentation/translations/zh_CN/vm/z3fold.rst b/Documentation/translations/zh_CN/vm/z3fold.rst new file mode 100644 index 000000000000..57204aa08caa --- /dev/null +++ b/Documentation/translations/zh_CN/vm/z3fold.rst @@ -0,0 +1,31 @@ +:Original: Documentation/vm/z3fold.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + + +====== +z3fold +====== + +z3fold是一个专门用于å˜å‚¨åŽ‹ç¼©é¡µçš„分é…器。它被设计为æ¯ä¸ªç‰©ç†é¡µæœ€å¤šå¯ä»¥å˜å‚¨ä¸‰ä¸ªåŽ‹ç¼©é¡µã€‚ +它是zbudçš„è¡ç”Ÿç‰©ï¼Œå…许更高的压缩率,ä¿æŒå…¶å‰è¾ˆçš„简å•æ€§å’Œç¡®å®šæ€§ã€‚ + +z3foldå’Œzbud的主è¦åŒºåˆ«æ˜¯: + +* 与zbudä¸åŒçš„是,z3foldå…许最大的PAGE_SIZE分é…。 +* z3fold在其页é¢ä¸æœ€å¤šå¯ä»¥å®¹çº³3ä¸ªåŽ‹ç¼©é¡µé¢ +* z3fold本身没有输出任何APIï¼Œå› æ¤æ‰“算通过zpoolçš„APIæ¥ä½¿ç”¨ + +为了ä¿æŒç¡®å®šæ€§å’Œç®€å•æ€§ï¼Œz3fold,就åƒzbudä¸€æ ·ï¼Œæ€»æ˜¯åœ¨æ¯é¡µå˜å‚¨ä¸€ä¸ªæ•´æ•°çš„压缩页,但是 +它最多å¯ä»¥å˜å‚¨3页,ä¸åƒzbud最多å¯ä»¥å˜å‚¨2é¡µã€‚å› æ¤åŽ‹ç¼©çŽ‡è¾¾åˆ°2.7å€å·¦å³ï¼Œè€Œzbud的压缩 +率是1.7å€å·¦å³ã€‚ + +ä¸åƒzbud(但也åƒzsmalloc),z3fold_alloc()é‚£æ ·ä¸è¿”回一个å¯é‡å¤å¼•ç”¨çš„指针。相å,它 +è¿”å›žä¸€ä¸ªæ— ç¬¦å·é•¿å¥æŸ„,它编ç 了被分é…对象的实际ä½ç½®ã€‚ + +ä¿æŒæœ‰æ•ˆçš„压缩率接近于zsmalloc,z3foldä¸ä¾èµ–于MMUçš„å¯ç”¨ï¼Œå¹¶æ供更å¯é¢„测的回收行 +为,这使得它更适åˆäºŽå°åž‹å’Œå应迅速的系统。 diff --git a/Documentation/translations/zh_CN/vm/zsmalloc.rst b/Documentation/translations/zh_CN/vm/zsmalloc.rst new file mode 100644 index 000000000000..29e9c70a8eb6 --- /dev/null +++ b/Documentation/translations/zh_CN/vm/zsmalloc.rst @@ -0,0 +1,78 @@ +:Original: Documentation/vm/zs_malloc.rst + +:翻译: + + å¸å»¶è…¾ Yanteng Si <siyanteng@loongson.cn> + +:æ ¡è¯‘: + +======== +zsmalloc +======== + +这个分é…器是为与zramä¸€èµ·ä½¿ç”¨è€Œè®¾è®¡çš„ã€‚å› æ¤ï¼Œè¯¥åˆ†é…器应该在低内å˜æ¡ä»¶ä¸‹å·¥ä½œè‰¯å¥½ã€‚特别是, +它从未å°è¯•è¿‡higher order页é¢çš„分é…,这在内å˜åŽ‹åŠ›ä¸‹å¾ˆå¯èƒ½ä¼šå¤±è´¥ã€‚å¦ä¸€æ–¹é¢ï¼Œå¦‚æžœæˆ‘ä»¬åª +是使用å•ï¼ˆ0-order)页,它将éå—éžå¸¸é«˜çš„碎片化 - 任何大å°ä¸ºPAGE_SIZE/2或更大的对象将 +å æ®æ•´ä¸ªé¡µé¢ã€‚这是其å‰èº«ï¼ˆxvmalloc)的主è¦é—®é¢˜ä¹‹ä¸€ã€‚ + +为了克æœè¿™äº›é—®é¢˜ï¼Œzsmalloc分é…äº†ä¸€å †0-order页é¢ï¼Œå¹¶ä½¿ç”¨å„ç§"struct page"å—段将它 +们链接起æ¥ã€‚这些链接的页é¢ä½œä¸ºä¸€ä¸ªå•ä¸€çš„higher order页é¢ï¼Œå³ä¸€ä¸ªå¯¹è±¡å¯ä»¥è·¨è¶Š0-order +页é¢çš„边界。代ç 将这些链接的页é¢ä½œä¸ºä¸€ä¸ªå®žä½“,称为zspage。 + +为了简å•èµ·è§ï¼Œzsmallocåªèƒ½åˆ†é…大å°ä¸è¶…过PAGE_SIZEçš„å¯¹è±¡ï¼Œå› ä¸ºè¿™æ»¡è¶³äº†æ‰€æœ‰å½“å‰ç”¨æˆ·çš„ +è¦æ±‚(在最å的情况下,页é¢æ˜¯ä¸å¯åŽ‹ç¼©çš„ï¼Œå› æ¤ä»¥"åŽŸæ ·"å³æœªåŽ‹ç¼©çš„å½¢å¼å˜å‚¨ï¼‰ã€‚对于大于这 +个大å°çš„分é…请求,会返回失败(è§zs_malloc)。 + +æ¤å¤–,zs_malloc()并ä¸è¿”回一个å¯é‡å¤å¼•ç”¨çš„指针。相å,它返回一个ä¸é€æ˜Žçš„å¥æŸ„ï¼ˆæ— ç¬¦å· +长),它编ç 了被分é…对象的实际ä½ç½®ã€‚è¿™ç§é—´æŽ¥æ€§çš„åŽŸå› æ˜¯zsmalloc并ä¸ä¿æŒzspages的永久 +æ˜ å°„ï¼Œå› ä¸ºè¿™åœ¨32ä½ç³»ç»Ÿä¸Šä¼šå¯¼è‡´é—®é¢˜ï¼Œå› ä¸ºå†…æ ¸ç©ºé—´æ˜ å°„çš„VA区域éžå¸¸å°ã€‚å› æ¤ï¼Œåœ¨ä½¿ç”¨åˆ†é… +的内å˜ä¹‹å‰ï¼Œå¯¹è±¡å¿…须使用zs_map_object()è¿›è¡Œæ˜ å°„ä»¥èŽ·å¾—ä¸€ä¸ªå¯ç”¨çš„指针,éšåŽä½¿ç”¨ +zs_unmap_object()è§£é™¤æ˜ å°„ã€‚ + +stat +==== + +通过CONFIG_ZSMALLOC_STAT,我们å¯ä»¥é€šè¿‡ ``/sys/kernel/debug/zsmalloc/<user name>`` +看到zsmalloc内部信æ¯ã€‚下é¢æ˜¯ä¸€ä¸ªç»Ÿè®¡è¾“出的例å。:: + + # cat /sys/kernel/debug/zsmalloc/zram0/classes + + class size almost_full almost_empty obj_allocated obj_used pages_used pages_per_zspage + ... + ... + 9 176 0 1 186 129 8 4 + 10 192 1 0 2880 2872 135 3 + 11 208 0 1 819 795 42 2 + 12 224 0 1 219 159 12 4 + ... + ... + + +class + 索引 +size + zspageå˜å‚¨å¯¹è±¡å¤§å° +almost_empty + ZS_ALMOST_EMPTY zspageçš„æ•°é‡ï¼ˆè§ä¸‹æ–‡ï¼‰ã€‚ +almost_full + ZS_ALMOST_FULL zspageçš„æ•°é‡(è§ä¸‹å›¾) +obj_allocated + 已分é…å¯¹è±¡çš„æ•°é‡ +obj_used + 分é…ç»™ç”¨æˆ·çš„å¯¹è±¡çš„æ•°é‡ +pages_used + 为该类分é…的页数 +pages_per_zspage + 组æˆä¸€ä¸ªzspageçš„0-order页é¢çš„æ•°é‡ + +当n <= N / f时,我们将一个zspage分é…ç»™ZS_ALMOST_EMPTYfullnessç»„ï¼Œå…¶ä¸ + +* n = 已分é…å¯¹è±¡çš„æ•°é‡ +* N = zspageå¯ä»¥å˜å‚¨çš„对象总数 +* f = fullness_threshold_frac(å³ï¼Œç›®å‰æ˜¯4个) + +åŒæ ·åœ°ï¼Œæˆ‘们将zspage分é…ç»™: + +* ZS_ALMOST_FULL when n > N / f +* ZS_EMPTY when n == 0 +* ZS_FULL when n == N diff --git a/Documentation/userspace-api/media/drivers/uvcvideo.rst b/Documentation/userspace-api/media/drivers/uvcvideo.rst index e5fd8fad333c..a290f9fadae9 100644 --- a/Documentation/userspace-api/media/drivers/uvcvideo.rst +++ b/Documentation/userspace-api/media/drivers/uvcvideo.rst @@ -7,7 +7,7 @@ This file documents some driver-specific aspects of the UVC driver, such as driver-specific ioctls and implementation notes. Questions and remarks can be sent to the Linux UVC development mailing list at -linux-uvc-devel@lists.berlios.de. +linux-media@vger.kernel.org. Extension Unit (XU) support diff --git a/Documentation/userspace-api/media/lirc.h.rst.exceptions b/Documentation/userspace-api/media/lirc.h.rst.exceptions index 913d17b49831..1aeb7d7afe13 100644 --- a/Documentation/userspace-api/media/lirc.h.rst.exceptions +++ b/Documentation/userspace-api/media/lirc.h.rst.exceptions @@ -30,6 +30,8 @@ ignore define LIRC_CAN_REC ignore define LIRC_CAN_SEND_MASK ignore define LIRC_CAN_REC_MASK +ignore define LIRC_CAN_SET_REC_FILTER +ignore define LIRC_CAN_NOTIFY_DECODE # Obsolete ioctls diff --git a/Documentation/userspace-api/media/mediactl/media-controller-model.rst b/Documentation/userspace-api/media/mediactl/media-controller-model.rst index 222cb99debb5..78bfdfb2a322 100644 --- a/Documentation/userspace-api/media/mediactl/media-controller-model.rst +++ b/Documentation/userspace-api/media/mediactl/media-controller-model.rst @@ -33,3 +33,9 @@ are: - An **interface link** is a point-to-point bidirectional control connection between a Linux Kernel interface and an entity. + +- An **ancillary link** is a point-to-point connection denoting that two + entities form a single logical unit. For example this could represent the + fact that a particular camera sensor and lens controller form a single + physical module, meaning this lens controller drives the lens for this + camera sensor.
\ No newline at end of file diff --git a/Documentation/userspace-api/media/mediactl/media-types.rst b/Documentation/userspace-api/media/mediactl/media-types.rst index 0a26397bd01d..0ffeece1e0c8 100644 --- a/Documentation/userspace-api/media/mediactl/media-types.rst +++ b/Documentation/userspace-api/media/mediactl/media-types.rst @@ -412,14 +412,21 @@ must be set for every pad. is set by drivers and is read-only for applications. * - ``MEDIA_LNK_FL_LINK_TYPE`` - - This is a bitmask that defines the type of the link. Currently, - two types of links are supported: + - This is a bitmask that defines the type of the link. The following + link types are currently supported: .. _MEDIA-LNK-FL-DATA-LINK: - ``MEDIA_LNK_FL_DATA_LINK`` if the link is between two pads + ``MEDIA_LNK_FL_DATA_LINK`` for links that represent a data connection + between two pads. .. _MEDIA-LNK-FL-INTERFACE-LINK: - ``MEDIA_LNK_FL_INTERFACE_LINK`` if the link is between an - interface and an entity + ``MEDIA_LNK_FL_INTERFACE_LINK`` for links that associate an entity to its + interface. + + .. _MEDIA-LNK-FL-ANCILLARY-LINK: + + ``MEDIA_LNK_FL_ANCILLARY_LINK`` for links that represent a physical + relationship between two entities. The link may or may not be + immutable, so applications must not assume either case. diff --git a/Documentation/userspace-api/media/v4l/dev-decoder.rst b/Documentation/userspace-api/media/v4l/dev-decoder.rst index 3cf2b496f2d0..675bc2c3c6b8 100644 --- a/Documentation/userspace-api/media/v4l/dev-decoder.rst +++ b/Documentation/userspace-api/media/v4l/dev-decoder.rst @@ -72,6 +72,12 @@ coded resolution coded width width for given coded resolution. +coding tree unit + processing unit of the HEVC codec (corresponds to macroblock units in + H.264, VP8, VP9), + can use block structures of up to 64×64 pixels. + Good at sub-partitioning the picture into variable sized structures. + decode order the order in which frames are decoded; may differ from display order if the coded format includes a feature of frame reordering; for decoders, @@ -104,7 +110,8 @@ keyframe macroblock a processing unit in image and video compression formats based on linear block transforms (e.g. H.264, VP8, VP9); codec-specific, but for most of - popular codecs the size is 16x16 samples (pixels). + popular codecs the size is 16x16 samples (pixels). The HEVC codec uses a + slightly more flexible processing unit called coding tree unit (CTU). OUTPUT the source buffer queue; for decoders, the queue of buffers containing diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index 6541e4c32b26..bee73065e993 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -649,10 +649,16 @@ Stateless Codec Control ID :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. * - __u32 - ``pic_num`` - - + - For short term references, this must match the derived value PicNum + (8-28) and for long term references it must match the derived value + LongTermPicNum (8-29). When decoding frames (as opposed to fields) + pic_num is the same as FrameNumWrap. * - __u16 - ``frame_num`` - - + - For short term references, this must match the frame_num value from + the slice header syntax (the driver will wrap the value if needed). For + long term references, this must be set to the value of + long_term_frame_idx described in the dec_ref_pic_marking() syntax. * - __u8 - ``fields`` - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>` diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 4cd7c541fc30..6183f43f4d73 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1180,6 +1180,28 @@ enum v4l2_mpeg_video_h264_entropy_mode - is set to non zero value. Applicable to H264, H263 and MPEG4 encoder. +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE (enum)`` + +enum v4l2_mpeg_video_intra_refresh_period_type - + Sets the type of intra refresh. The period to refresh + the whole frame is specified by V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD. + Note that if this control is not present, then it is undefined what + refresh type is used and it is up to the driver to decide. + Applicable to H264 and HEVC encoders. Possible values are: + +.. tabularcolumns:: |p{9.6cm}|p{7.9cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM`` + - The whole frame is completely refreshed randomly + after the specified period. + * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC`` + - The whole frame MBs are completely refreshed in cyclic order + after the specified period. + ``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)`` Intra macroblock refresh period. This sets the period to refresh the whole frame. In other words, this defines the number of frames diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst index cabfa34b7db5..0ff68cd8cf62 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst @@ -239,6 +239,25 @@ please make a proposal on the linux-media mailing list. It remains an opaque intermediate format and the MDP hardware must be used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``, ``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``. + * .. _V4L2-PIX-FMT-QC08C: + + - ``V4L2_PIX_FMT_QC08C`` + - 'QC08C' + - Compressed Macro-tile 8-Bit YUV420 format used by Qualcomm platforms. + It is an opaque intermediate format. The used compression is lossless + and it is used by various multimedia hardware blocks like GPU, display + controllers, ISP and video accelerators. + It contains four planes for progressive video and eight planes for + interlaced video. + * .. _V4L2-PIX-FMT-QC10C: + + - ``V4L2_PIX_FMT_QC10C`` + - 'QC10C' + - Compressed Macro-tile 10-Bit YUV420 format used by Qualcomm platforms. + It is an opaque intermediate format. The used compression is lossless + and it is used by various multimedia hardware blocks like GPU, display + controllers, ISP and video accelerators. + It contains four planes for progressive video. .. raw:: latex \normalsize diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst index 8ebd58c3588f..6a387f9df3ba 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst @@ -48,6 +48,17 @@ are often referred to as greyscale formats. - ... - ... + * .. _V4L2-PIX-FMT-IPU3-Y10: + + - ``V4L2_PIX_FMT_IPU3_Y10`` + - 'ip3y' + + - Y'\ :sub:`0`\ [7:0] + - Y'\ :sub:`1`\ [5:0] Y'\ :sub:`0`\ [9:8] + - Y'\ :sub:`2`\ [3:0] Y'\ :sub:`1`\ [9:6] + - Y'\ :sub:`3`\ [1:0] Y'\ :sub:`2`\ [9:4] + - Y'\ :sub:`3`\ [9:2] + * .. _V4L2-PIX-FMT-Y10: - ``V4L2_PIX_FMT_Y10`` @@ -133,4 +144,5 @@ are often referred to as greyscale formats. For the Y16 and Y16_BE formats, the actual sampling precision may be lower than 16 bits. For example, 10 bits per pixel uses values in the range 0 to - 1023. + 1023. For the IPU3_Y10 format 25 pixels are packed into 32 bytes, which + leaves the 6 most significant bits of the last byte padded with 0. diff --git a/Documentation/userspace-api/media/v4l/vidioc-streamon.rst b/Documentation/userspace-api/media/v4l/vidioc-streamon.rst index 0bc86f06947b..1a79313a29fa 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-streamon.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-streamon.rst @@ -43,8 +43,7 @@ the capture or output process during streaming Capture hardware is disabled and no input buffers are filled (if there are any empty buffers in the incoming queue) until ``VIDIOC_STREAMON`` has been called. Output hardware is disabled and no video signal is -produced until ``VIDIOC_STREAMON`` has been called. The ioctl will -succeed when at least one output buffer is in the incoming queue. +produced until ``VIDIOC_STREAMON`` has been called. Memory-to-memory devices will not start until ``VIDIOC_STREAMON`` has been called for both the capture and output stream types. diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index c8e2e9cd84dc..11e00a46c610 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -982,12 +982,22 @@ memory. __u8 pad2[30]; }; -If the KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag is returned from the -KVM_CAP_XEN_HVM check, it may be set in the flags field of this ioctl. -This requests KVM to generate the contents of the hypercall page -automatically; hypercalls will be intercepted and passed to userspace -through KVM_EXIT_XEN. In this case, all of the blob size and address -fields must be zero. +If certain flags are returned from the KVM_CAP_XEN_HVM check, they may +be set in the flags field of this ioctl: + +The KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag requests KVM to generate +the contents of the hypercall page automatically; hypercalls will be +intercepted and passed to userspace through KVM_EXIT_XEN. In this +ase, all of the blob size and address fields must be zero. + +The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates to KVM that userspace +will always use the KVM_XEN_HVM_EVTCHN_SEND ioctl to deliver event +channel interrupts rather than manipulating the guest's shared_info +structures directly. This, in turn, may allow KVM to enable features +such as intercepting the SCHEDOP_poll hypercall to accelerate PV +spinlock operation for the guest. Userspace may still use the ioctl +to deliver events if it was advertised, even if userspace does not +send this indication that it will always do so No other flags are currently valid in the struct kvm_xen_hvm_config. @@ -1476,14 +1486,43 @@ Possible values are: [s390] KVM_MP_STATE_LOAD the vcpu is in a special load/startup state [s390] + KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting + for a wakeup event [arm64] ========================== =============================================== On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace on these architectures. -For arm64/riscv: -^^^^^^^^^^^^^^^^ +For arm64: +^^^^^^^^^^ + +If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will emulate the +architectural execution of a WFI instruction. + +If a wakeup event is recognized, KVM will exit to userspace with a +KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If +userspace wants to honor the wakeup, it must set the vCPU's MP state to +KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup +event in subsequent calls to KVM_RUN. + +.. warning:: + + If userspace intends to keep the vCPU in a SUSPENDED state, it is + strongly recommended that userspace take action to suppress the + wakeup event (such as masking an interrupt). Otherwise, subsequent + calls to KVM_RUN will immediately exit with a KVM_SYSTEM_EVENT_WAKEUP + event and inadvertently waste CPU cycles. + + Additionally, if userspace takes action to suppress a wakeup event, + it is strongly recommended that it also restores the vCPU to its + original state when the vCPU is made RUNNABLE again. For example, + if userspace masked a pending interrupt to suppress the wakeup, + the interrupt should be unmasked before returning control to the + guest. + +For riscv: +^^^^^^^^^^ The only states that are valid are KVM_MP_STATE_STOPPED and KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not. @@ -1887,22 +1926,25 @@ the future. 4.55 KVM_SET_TSC_KHZ -------------------- -:Capability: KVM_CAP_TSC_CONTROL +:Capability: KVM_CAP_TSC_CONTROL / KVM_CAP_VM_TSC_CONTROL :Architectures: x86 -:Type: vcpu ioctl +:Type: vcpu ioctl / vm ioctl :Parameters: virtual tsc_khz :Returns: 0 on success, -1 on error Specifies the tsc frequency for the virtual machine. The unit of the frequency is KHz. +If the KVM_CAP_VM_TSC_CONTROL capability is advertised, this can also +be used as a vm ioctl to set the initial tsc frequency of subsequently +created vCPUs. 4.56 KVM_GET_TSC_KHZ -------------------- -:Capability: KVM_CAP_GET_TSC_KHZ +:Capability: KVM_CAP_GET_TSC_KHZ / KVM_CAP_VM_TSC_CONTROL :Architectures: x86 -:Type: vcpu ioctl +:Type: vcpu ioctl / vm ioctl :Parameters: none :Returns: virtual tsc-khz on success, negative value on error @@ -2601,6 +2643,24 @@ EINVAL. After the vcpu's SVE configuration is finalized, further attempts to write this register will fail with EPERM. +arm64 bitmap feature firmware pseudo-registers have the following bit pattern:: + + 0x6030 0000 0016 <regno:16> + +The bitmap feature firmware registers exposes the hypercall services that +are available for userspace to configure. The set bits corresponds to the +services that are available for the guests to access. By default, KVM +sets all the supported bits during VM initialization. The userspace can +discover the available services via KVM_GET_ONE_REG, and write back the +bitmap corresponding to the features that it wishes guests to see via +KVM_SET_ONE_REG. + +Note: These registers are immutable once any of the vCPUs of the VM has +run at least once. A KVM_SET_ONE_REG in such a scenario will return +a -EBUSY to userspace. + +(See Documentation/virt/kvm/arm/hypercalls.rst for more details.) + MIPS registers are mapped using the lower 32 bits. The upper 16 of that is the register group type: @@ -3754,12 +3814,18 @@ in case of KVM_S390_MEMOP_F_CHECK_ONLY), the ioctl returns a positive error number indicating the type of exception. This exception is also raised directly at the corresponding VCPU if the flag KVM_S390_MEMOP_F_INJECT_EXCEPTION is set. +On protection exceptions, unless specified otherwise, the injected +translation-exception identifier (TEID) indicates suppression. If the KVM_S390_MEMOP_F_SKEY_PROTECTION flag is set, storage key protection is also in effect and may cause exceptions if accesses are prohibited given the access key designated by "key"; the valid range is 0..15. KVM_S390_MEMOP_F_SKEY_PROTECTION is available if KVM_CAP_S390_MEM_OP_EXTENSION is > 0. +Since the accessed memory may span multiple pages and those pages might have +different storage keys, it is possible that a protection exception occurs +after memory has been modified. In this case, if the exception is injected, +the TEID does not indicate suppression. Absolute read/write: ^^^^^^^^^^^^^^^^^^^^ @@ -5216,7 +5282,25 @@ have deterministic behavior. struct { __u64 gfn; } shared_info; - __u64 pad[4]; + struct { + __u32 send_port; + __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ + __u32 flags; + union { + struct { + __u32 port; + __u32 vcpu; + __u32 priority; + } port; + struct { + __u32 port; /* Zero for eventfd */ + __s32 fd; + } eventfd; + __u32 padding[4]; + } deliver; + } evtchn; + __u32 xen_version; + __u64 pad[8]; } u; }; @@ -5247,6 +5331,30 @@ KVM_XEN_ATTR_TYPE_SHARED_INFO KVM_XEN_ATTR_TYPE_UPCALL_VECTOR Sets the exception vector used to deliver Xen event channel upcalls. + This is the HVM-wide vector injected directly by the hypervisor + (not through the local APIC), typically configured by a guest via + HVM_PARAM_CALLBACK_IRQ. + +KVM_XEN_ATTR_TYPE_EVTCHN + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures + an outbound port number for interception of EVTCHNOP_send requests + from the guest. A given sending port number may be directed back + to a specified vCPU (by APIC ID) / port / priority on the guest, + or to trigger events on an eventfd. The vCPU and priority can be + changed by setting KVM_XEN_EVTCHN_UPDATE in a subsequent call, + but other fields cannot change for a given sending port. A port + mapping is removed by using KVM_XEN_EVTCHN_DEASSIGN in the flags + field. + +KVM_XEN_ATTR_TYPE_XEN_VERSION + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures + the 32-bit version code returned to the guest when it invokes the + XENVER_version call; typically (XEN_MAJOR << 16 | XEN_MINOR). PV + Xen guests will often use this to as a dummy hypercall to trigger + event channel delivery, so responding within the kernel without + exiting to userspace is beneficial. 4.127 KVM_XEN_HVM_GET_ATTR -------------------------- @@ -5258,7 +5366,8 @@ KVM_XEN_ATTR_TYPE_UPCALL_VECTOR :Returns: 0 on success, < 0 on error Allows Xen VM attributes to be read. For the structure and types, -see KVM_XEN_HVM_SET_ATTR above. +see KVM_XEN_HVM_SET_ATTR above. The KVM_XEN_ATTR_TYPE_EVTCHN +attribute cannot be read. 4.128 KVM_XEN_VCPU_SET_ATTR --------------------------- @@ -5285,6 +5394,13 @@ see KVM_XEN_HVM_SET_ATTR above. __u64 time_blocked; __u64 time_offline; } runstate; + __u32 vcpu_id; + struct { + __u32 port; + __u32 priority; + __u64 expires_ns; + } timer; + __u8 vector; } u; }; @@ -5326,6 +5442,27 @@ KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST or RUNSTATE_offline) to set the current accounted state as of the adjusted state_entry_time. +KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the Xen + vCPU ID of the given vCPU, to allow timer-related VCPU operations to + be intercepted by KVM. + +KVM_XEN_VCPU_ATTR_TYPE_TIMER + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the + event channel port/priority for the VIRQ_TIMER of the vCPU, as well + as allowing a pending timer to be saved/restored. + +KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the + per-vCPU local APIC upcall vector, configured by a Xen guest with + the HVMOP_set_evtchn_upcall_vector hypercall. This is typically + used by Windows guests, and is distinct from the HVM-wide upcall + vector configured with HVM_PARAM_CALLBACK_IRQ. + + 4.129 KVM_XEN_VCPU_GET_ATTR --------------------------- @@ -5645,6 +5782,25 @@ enabled with ``arch_prctl()``, but this may change in the future. The offsets of the state save areas in struct kvm_xsave follow the contents of CPUID leaf 0xD on the host. +4.135 KVM_XEN_HVM_EVTCHN_SEND +----------------------------- + +:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_irq_routing_xen_evtchn +:Returns: 0 on success, < 0 on error + + +:: + + struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; + }; + +This ioctl injects an event channel interrupt directly to the guest vCPU. 5. The kvm_run structure ======================== @@ -5987,6 +6143,9 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 + #define KVM_SYSTEM_EVENT_WAKEUP 4 + #define KVM_SYSTEM_EVENT_SUSPEND 5 + #define KVM_SYSTEM_EVENT_SEV_TERM 6 __u32 type; __u32 ndata; __u64 data[16]; @@ -6011,6 +6170,13 @@ Valid values for 'type' are: has requested a crash condition maintenance. Userspace can choose to ignore the request, or to gather VM memory core dump and/or reset/shutdown of the VM. + - KVM_SYSTEM_EVENT_SEV_TERM -- an AMD SEV guest requested termination. + The guest physical address of the guest's GHCB is stored in `data[0]`. + - KVM_SYSTEM_EVENT_WAKEUP -- the exiting vCPU is in a suspended state and + KVM has recognized a wakeup event. Userspace may honor this event by + marking the exiting vCPU as runnable, or deny it and call KVM_RUN again. + - KVM_SYSTEM_EVENT_SUSPEND -- the guest has requested a suspension of + the VM. If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain architecture specific information for the system-level event. Only @@ -6027,6 +6193,32 @@ Previous versions of Linux defined a `flags` member in this struct. The field is now aliased to `data[0]`. Userspace can assume that it is only written if ndata is greater than 0. +For arm/arm64: +-------------- + +KVM_SYSTEM_EVENT_SUSPEND exits are enabled with the +KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest invokes the PSCI +SYSTEM_SUSPEND function, KVM will exit to userspace with this event +type. + +It is the sole responsibility of userspace to implement the PSCI +SYSTEM_SUSPEND call according to ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND". +KVM does not change the vCPU's state before exiting to userspace, so +the call parameters are left in-place in the vCPU registers. + +Userspace is _required_ to take action for such an exit. It must +either: + + - Honor the guest request to suspend the VM. Userspace can request + in-kernel emulation of suspension by setting the calling vCPU's + state to KVM_MP_STATE_SUSPENDED. Userspace must configure the vCPU's + state according to the parameters passed to the PSCI function when + the calling vCPU is resumed. See ARM DEN0022D.b 5.19.1 "Intended use" + for details on the function parameters. + + - Deny the guest request to suspend the VM. See ARM DEN0022D.b 5.19.2 + "Caller responsibilities" for possible return values. + :: /* KVM_EXIT_IOAPIC_EOI */ @@ -7147,6 +7339,15 @@ The valid bits in cap.args[0] are: Additionally, when this quirk is disabled, KVM clears CPUID.01H:ECX[bit 3] if IA32_MISC_ENABLE[bit 18] is cleared. + + KVM_X86_QUIRK_FIX_HYPERCALL_INSN By default, KVM rewrites guest + VMMCALL/VMCALL instructions to match the + vendor's hypercall instruction for the + system. When this quirk is disabled, KVM + will no longer rewrite invalid guest + hypercall instructions. Executing the + incorrect hypercall instruction will + generate a #UD within the guest. =================================== ============================================ 8. Other capabilities. @@ -7624,8 +7825,9 @@ PVHVM guests. Valid flags are:: #define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR (1 << 0) #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1) #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) - #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 2) - #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 3) + #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) + #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) + #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) The KVM_XEN_HVM_CONFIG_HYPERCALL_MSR flag indicates that the KVM_XEN_HVM_CONFIG ioctl is available, for the guest to set its hypercall page. @@ -7649,6 +7851,14 @@ The KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL flag indicates that IRQ routing entries of the type KVM_IRQ_ROUTING_XEN_EVTCHN are supported, with the priority field set to indicate 2 level event channel delivery. +The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates that KVM supports +injecting event channel events directly into the guest with the +KVM_XEN_HVM_EVTCHN_SEND ioctl. It also indicates support for the +KVM_XEN_ATTR_TYPE_EVTCHN/XEN_VERSION HVM attributes and the +KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID/TIMER/UPCALL_VECTOR vCPU attributes. +related to event channel delivery, timers, and the XENVER_version +interception. + 8.31 KVM_CAP_PPC_MULTITCE ------------------------- @@ -7736,6 +7946,16 @@ At this time, KVM_PMU_CAP_DISABLE is the only capability. Setting this capability will disable PMU virtualization for that VM. Usermode should adjust CPUID leaf 0xA to reflect that the PMU is disabled. +8.36 KVM_CAP_ARM_SYSTEM_SUSPEND +------------------------------- + +:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND +:Architectures: arm64 +:Type: vm + +When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of +type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request. + 9. Known KVM API problems ========================= diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst new file mode 100644 index 000000000000..3e23084644ba --- /dev/null +++ b/Documentation/virt/kvm/arm/hypercalls.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +ARM Hypercall Interface +======================= + +KVM handles the hypercall services as requested by the guests. New hypercall +services are regularly made available by the ARM specification or by KVM (as +vendor services) if they make sense from a virtualization point of view. + +This means that a guest booted on two different versions of KVM can observe +two different "firmware" revisions. This could cause issues if a given guest +is tied to a particular version of a hypercall service, or if a migration +causes a different version to be exposed out of the blue to an unsuspecting +guest. + +In order to remedy this situation, KVM exposes a set of "firmware +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG +interface. These registers can be saved/restored by userspace, and set +to a convenient value as required. + +The following registers are defined: + +* KVM_REG_ARM_PSCI_VERSION: + + KVM implements the PSCI (Power State Coordination Interface) + specification in order to provide services such as CPU on/off, reset + and power-off to the guest. + + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set + (and thus has already been initialized) + - Returns the current PSCI version on GET_ONE_REG (defaulting to the + highest PSCI version implemented by KVM and compatible with v0.2) + - Allows any PSCI version implemented by KVM and compatible with + v0.2 to be set with SET_ONE_REG + - Affects the whole VM (even if the register view is per-vcpu) + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: + Holds the state of the firmware support to mitigate CVE-2017-5715, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_1 in [1]. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: + KVM does not offer + firmware support for the workaround. The mitigation status for the + guest is unknown. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: + The workaround HVC call is + available to the guest and required for the mitigation. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: + The workaround HVC call + is available to the guest, but it is not needed on this VCPU. + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: + Holds the state of the firmware support to mitigate CVE-2018-3639, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_2 in [1]_. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: + A workaround is not + available. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: + The workaround state is + unknown. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: + The workaround is available, + and can be disabled by a vCPU. If + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for + this vCPU. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: + The workaround is always active on this vCPU or it is not needed. + + +Bitmap Feature Firmware Registers +--------------------------------- + +Contrary to the above registers, the following registers exposes the +hypercall services in the form of a feature-bitmap to the userspace. This +bitmap is translated to the services that are available to the guest. +There is a register defined per service call owner and can be accessed via +GET/SET_ONE_REG interface. + +By default, these registers are set with the upper limit of the features +that are supported. This way userspace can discover all the usable +hypercall services via GET_ONE_REG. The user-space can write-back the +desired bitmap back via SET_ONE_REG. The features for the registers that +are untouched, probably because userspace isn't aware of them, will be +exposed as is to the guest. + +Note that KVM will not allow the userspace to configure the registers +anymore once any of the vCPUs has run at least once. Instead, it will +return a -EBUSY. + +The pseudo-firmware bitmap register are as follows: + +* KVM_REG_ARM_STD_BMAP: + Controls the bitmap of the ARM Standard Secure Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0: + The bit represents the services offered under v1.0 of ARM True Random + Number Generator (TRNG) specification, ARM DEN0098. + +* KVM_REG_ARM_STD_HYP_BMAP: + Controls the bitmap of the ARM Standard Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME: + The bit represents the Paravirtualized Time service as represented by + ARM DEN0057A. + +* KVM_REG_ARM_VENDOR_HYP_BMAP: + Controls the bitmap of the Vendor specific Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT + The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID + and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids. + + Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP: + The bit represents the Precision Time Protocol KVM service. + +Errors: + + ======= ============================================================= + -ENOENT Unknown register accessed. + -EBUSY Attempt a 'write' to the register after the VM has started. + -EINVAL Invalid bitmap written to the register. + ======= ============================================================= + +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf diff --git a/Documentation/virt/kvm/arm/index.rst b/Documentation/virt/kvm/arm/index.rst index 78a9b670aafe..e84848432158 100644 --- a/Documentation/virt/kvm/arm/index.rst +++ b/Documentation/virt/kvm/arm/index.rst @@ -8,6 +8,6 @@ ARM :maxdepth: 2 hyp-abi - psci + hypercalls pvtime ptp_kvm diff --git a/Documentation/virt/kvm/arm/psci.rst b/Documentation/virt/kvm/arm/psci.rst deleted file mode 100644 index d52c2e83b5b8..000000000000 --- a/Documentation/virt/kvm/arm/psci.rst +++ /dev/null @@ -1,77 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -========================================= -Power State Coordination Interface (PSCI) -========================================= - -KVM implements the PSCI (Power State Coordination Interface) -specification in order to provide services such as CPU on/off, reset -and power-off to the guest. - -The PSCI specification is regularly updated to provide new features, -and KVM implements these updates if they make sense from a virtualization -point of view. - -This means that a guest booted on two different versions of KVM can -observe two different "firmware" revisions. This could cause issues if -a given guest is tied to a particular PSCI revision (unlikely), or if -a migration causes a different PSCI version to be exposed out of the -blue to an unsuspecting guest. - -In order to remedy this situation, KVM exposes a set of "firmware -pseudo-registers" that can be manipulated using the GET/SET_ONE_REG -interface. These registers can be saved/restored by userspace, and set -to a convenient value if required. - -The following register is defined: - -* KVM_REG_ARM_PSCI_VERSION: - - - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set - (and thus has already been initialized) - - Returns the current PSCI version on GET_ONE_REG (defaulting to the - highest PSCI version implemented by KVM and compatible with v0.2) - - Allows any PSCI version implemented by KVM and compatible with - v0.2 to be set with SET_ONE_REG - - Affects the whole VM (even if the register view is per-vcpu) - -* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: - Holds the state of the firmware support to mitigate CVE-2017-5715, as - offered by KVM to the guest via a HVC call. The workaround is described - under SMCCC_ARCH_WORKAROUND_1 in [1]. - - Accepted values are: - - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: - KVM does not offer - firmware support for the workaround. The mitigation status for the - guest is unknown. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: - The workaround HVC call is - available to the guest and required for the mitigation. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: - The workaround HVC call - is available to the guest, but it is not needed on this VCPU. - -* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: - Holds the state of the firmware support to mitigate CVE-2018-3639, as - offered by KVM to the guest via a HVC call. The workaround is described - under SMCCC_ARCH_WORKAROUND_2 in [1]_. - - Accepted values are: - - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: - A workaround is not - available. KVM does not offer firmware support for the workaround. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: - The workaround state is - unknown. KVM does not offer firmware support for the workaround. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: - The workaround is available, - and can be disabled by a vCPU. If - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for - this vCPU. - KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: - The workaround is always active on this vCPU or it is not needed. - -.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst index 5b1ebad24c77..8739120f4300 100644 --- a/Documentation/virt/kvm/x86/mmu.rst +++ b/Documentation/virt/kvm/x86/mmu.rst @@ -202,6 +202,10 @@ Shadow pages contain the following information: Is 1 if the MMU instance cannot use A/D bits. EPT did not have A/D bits before Haswell; shadow EPT page tables also cannot use A/D bits if the L1 hypervisor does not enable them. + role.passthrough: + The page is not backed by a guest page table, but its first entry + points to one. This is set if NPT uses 5-level page tables (host + CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=1). gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. diff --git a/Documentation/vm/arch_pgtable_helpers.rst b/Documentation/vm/arch_pgtable_helpers.rst index f8b225fc9190..cbaee9e59241 100644 --- a/Documentation/vm/arch_pgtable_helpers.rst +++ b/Documentation/vm/arch_pgtable_helpers.rst @@ -13,7 +13,7 @@ Following tables describe the expected semantics which can also be tested during boot via CONFIG_DEBUG_VM_PGTABLE option. All future changes in here or the debug test need to be in sync. -====================== + PTE Page Table Helpers ====================== @@ -79,7 +79,7 @@ PTE Page Table Helpers | ptep_set_access_flags | Converts into a more permissive PTE | +---------------------------+--------------------------------------------------+ -====================== + PMD Page Table Helpers ====================== @@ -153,7 +153,7 @@ PMD Page Table Helpers | pmdp_set_access_flags | Converts into a more permissive PMD | +---------------------------+--------------------------------------------------+ -====================== + PUD Page Table Helpers ====================== @@ -209,7 +209,7 @@ PUD Page Table Helpers | pudp_set_access_flags | Converts into a more permissive PUD | +---------------------------+--------------------------------------------------+ -========================== + HugeTLB Page Table Helpers ========================== @@ -235,7 +235,7 @@ HugeTLB Page Table Helpers | huge_ptep_set_access_flags | Converts into a more permissive HugeTLB | +---------------------------+--------------------------------------------------+ -======================== + SWAP Page Table Helpers ======================== diff --git a/Documentation/vm/bootmem.rst b/Documentation/vm/bootmem.rst new file mode 100644 index 000000000000..eb2b31eedfa1 --- /dev/null +++ b/Documentation/vm/bootmem.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========== +Boot Memory +=========== diff --git a/Documentation/vm/highmem.rst b/Documentation/vm/highmem.rst index 0f69a9fec34d..c9887f241c6c 100644 --- a/Documentation/vm/highmem.rst +++ b/Documentation/vm/highmem.rst @@ -50,61 +50,74 @@ space when they use mm context tags. Temporary Virtual Mappings ========================== -The kernel contains several ways of creating temporary mappings: +The kernel contains several ways of creating temporary mappings. The following +list shows them in order of preference of use. -* vmap(). This can be used to make a long duration mapping of multiple - physical pages into a contiguous virtual space. It needs global - synchronization to unmap. - -* kmap(). This permits a short duration mapping of a single page. It needs - global synchronization, but is amortized somewhat. It is also prone to - deadlocks when using in a nested fashion, and so it is not recommended for - new code. - -* kmap_atomic(). This permits a very short duration mapping of a single - page. Since the mapping is restricted to the CPU that issued it, it - performs well, but the issuing task is therefore required to stay on that - CPU until it has finished, lest some other task displace its mappings. +* kmap_local_page(). This function is used to require short term mappings. + It can be invoked from any context (including interrupts) but the mappings + can only be used in the context which acquired them. - kmap_atomic() may also be used by interrupt contexts, since it is does not - sleep and the caller may not sleep until after kunmap_atomic() is called. + This function should be preferred, where feasible, over all the others. - It may be assumed that k[un]map_atomic() won't fail. + These mappings are thread-local and CPU-local, meaning that the mapping + can only be accessed from within this thread and the thread is bound the + CPU while the mapping is active. Even if the thread is preempted (since + preemption is never disabled by the function) the CPU can not be + unplugged from the system via CPU-hotplug until the mapping is disposed. + It's valid to take pagefaults in a local kmap region, unless the context + in which the local mapping is acquired does not allow it for other reasons. -Using kmap_atomic -================= + kmap_local_page() always returns a valid virtual address and it is assumed + that kunmap_local() will never fail. -When and where to use kmap_atomic() is straightforward. It is used when code -wants to access the contents of a page that might be allocated from high memory -(see __GFP_HIGHMEM), for example a page in the pagecache. The API has two -functions, and they can be used in a manner similar to the following:: + Nesting kmap_local_page() and kmap_atomic() mappings is allowed to a certain + extent (up to KMAP_TYPE_NR) but their invocations have to be strictly ordered + because the map implementation is stack based. See kmap_local_page() kdocs + (included in the "Functions" section) for details on how to manage nested + mappings. - /* Find the page of interest. */ - struct page *page = find_get_page(mapping, offset); +* kmap_atomic(). This permits a very short duration mapping of a single + page. Since the mapping is restricted to the CPU that issued it, it + performs well, but the issuing task is therefore required to stay on that + CPU until it has finished, lest some other task displace its mappings. - /* Gain access to the contents of that page. */ - void *vaddr = kmap_atomic(page); + kmap_atomic() may also be used by interrupt contexts, since it does not + sleep and the callers too may not sleep until after kunmap_atomic() is + called. - /* Do something to the contents of that page. */ - memset(vaddr, 0, PAGE_SIZE); + Each call of kmap_atomic() in the kernel creates a non-preemptible section + and disable pagefaults. This could be a source of unwanted latency. Therefore + users should prefer kmap_local_page() instead of kmap_atomic(). - /* Unmap that page. */ - kunmap_atomic(vaddr); + It is assumed that k[un]map_atomic() won't fail. -Note that the kunmap_atomic() call takes the result of the kmap_atomic() call -not the argument. +* kmap(). This should be used to make short duration mapping of a single + page with no restrictions on preemption or migration. It comes with an + overhead as mapping space is restricted and protected by a global lock + for synchronization. When mapping is no longer needed, the address that + the page was mapped to must be released with kunmap(). -If you need to map two pages because you want to copy from one page to -another you need to keep the kmap_atomic calls strictly nested, like:: + Mapping changes must be propagated across all the CPUs. kmap() also + requires global TLB invalidation when the kmap's pool wraps and it might + block when the mapping space is fully utilized until a slot becomes + available. Therefore, kmap() is only callable from preemptible context. - vaddr1 = kmap_atomic(page1); - vaddr2 = kmap_atomic(page2); + All the above work is necessary if a mapping must last for a relatively + long time but the bulk of high-memory mappings in the kernel are + short-lived and only used in one place. This means that the cost of + kmap() is mostly wasted in such cases. kmap() was not intended for long + term mappings but it has morphed in that direction and its use is + strongly discouraged in newer code and the set of the preceding functions + should be preferred. - memcpy(vaddr1, vaddr2, PAGE_SIZE); + On 64-bit systems, calls to kmap_local_page(), kmap_atomic() and kmap() have + no real work to do because a 64-bit address space is more than sufficient to + address all the physical memory whose pages are permanently mapped. - kunmap_atomic(vaddr2); - kunmap_atomic(vaddr1); +* vmap(). This can be used to make a long duration mapping of multiple + physical pages into a contiguous virtual space. It needs global + synchronization to unmap. Cost of Temporary Mappings @@ -145,3 +158,10 @@ The general recommendation is that you don't use more than 8GiB on a 32-bit machine - although more might work for you and your workload, you're pretty much on your own - don't expect kernel developers to really care much if things come apart. + + +Functions +========= + +.. kernel-doc:: include/linux/highmem.h +.. kernel-doc:: include/linux/highmem-internal.h diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst index 44365c4574a3..575ccd40e30c 100644 --- a/Documentation/vm/index.rst +++ b/Documentation/vm/index.rst @@ -2,12 +2,39 @@ Linux Memory Management Documentation ===================================== -This is a collection of documents about the Linux memory management (mm) -subsystem internals with different level of details ranging from notes and -mailing list responses for elaborating descriptions of data structures and -algorithms. If you are looking for advice on simply allocating memory, see the -:ref:`memory_allocation`. For controlling and tuning guides, see the -:doc:`admin guide <../admin-guide/mm/index>`. +Memory Management Guide +======================= + +This is a guide to understanding the memory management subsystem +of Linux. If you are looking for advice on simply allocating memory, +see the :ref:`memory_allocation`. For controlling and tuning guides, +see the :doc:`admin guide <../admin-guide/mm/index>`. + +.. toctree:: + :maxdepth: 1 + + physical_memory + page_tables + process_addrs + bootmem + page_allocation + vmalloc + slab + highmem + page_reclaim + swap + page_cache + shmfs + oom + +Legacy Documentation +==================== + +This is a collection of older documents about the Linux memory management +(MM) subsystem internals with different level of details ranging from +notes and mailing list responses for elaborating descriptions of data +structures and algorithms. It should all be integrated nicely into the +above structured documentation, or deleted if it has served its purpose. .. toctree:: :maxdepth: 1 @@ -18,7 +45,6 @@ algorithms. If you are looking for advice on simply allocating memory, see the damon/index free_page_reporting frontswap - highmem hmm hwpoison hugetlbfs_reserv @@ -37,5 +63,6 @@ algorithms. If you are looking for advice on simply allocating memory, see the transhuge unevictable-lru vmalloced-kernel-stacks + vmemmap_dedup z3fold zsmalloc diff --git a/Documentation/vm/oom.rst b/Documentation/vm/oom.rst new file mode 100644 index 000000000000..18e9e40c1ec1 --- /dev/null +++ b/Documentation/vm/oom.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Out Of Memory Handling +====================== diff --git a/Documentation/vm/page_allocation.rst b/Documentation/vm/page_allocation.rst new file mode 100644 index 000000000000..d9b4495561f1 --- /dev/null +++ b/Documentation/vm/page_allocation.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Page Allocation +=============== diff --git a/Documentation/vm/page_cache.rst b/Documentation/vm/page_cache.rst new file mode 100644 index 000000000000..75eba7c431b2 --- /dev/null +++ b/Documentation/vm/page_cache.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +Page Cache +========== diff --git a/Documentation/vm/page_owner.rst b/Documentation/vm/page_owner.rst index 7e0c3f574e78..f5c954afe97c 100644 --- a/Documentation/vm/page_owner.rst +++ b/Documentation/vm/page_owner.rst @@ -121,6 +121,14 @@ Usage -r Sort by memory release time. -s Sort by stack trace. -t Sort by times (default). + --sort <order> Specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. + Choose a key from the **STANDARD FORMAT SPECIFIERS** section. The "+" is + optional since default direction is increasing numerical or lexicographic + order. Mixed use of abbreviated and complete-form of keys is allowed. + + Examples: + ./page_owner_sort <input> <output> --sort=n,+pid,-tgid + ./page_owner_sort <input> <output> --sort=at additional function:: @@ -129,7 +137,6 @@ Usage Specify culling rules.Culling syntax is key[,key[,...]].Choose a multi-letter key from the **STANDARD FORMAT SPECIFIERS** section. - <rules> is a single argument in the form of a comma-separated list, which offers a way to specify individual culling rules. The recognized keywords are described in the **STANDARD FORMAT SPECIFIERS** section below. @@ -137,7 +144,6 @@ Usage the STANDARD SORT KEYS section below. Mixed use of abbreviated and complete-form of keys is allowed. - Examples: ./page_owner_sort <input> <output> --cull=stacktrace ./page_owner_sort <input> <output> --cull=st,pid,name @@ -147,17 +153,44 @@ Usage -f Filter out the information of blocks whose memory has been released. Select: - --pid <PID> Select by pid. - --tgid <TGID> Select by tgid. - --name <command> Select by task command name. + --pid <pidlist> Select by pid. This selects the blocks whose process ID + numbers appear in <pidlist>. + --tgid <tgidlist> Select by tgid. This selects the blocks whose thread + group ID numbers appear in <tgidlist>. + --name <cmdlist> Select by task command name. This selects the blocks whose + task command name appear in <cmdlist>. + + <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list, + which offers a way to specify individual selecting rules. + + + Examples: + ./page_owner_sort <input> <output> --pid=1 + ./page_owner_sort <input> <output> --tgid=1,2,3 + ./page_owner_sort <input> <output> --name name1,name2 STANDARD FORMAT SPECIFIERS ========================== :: + For --sort option: + + KEY LONG DESCRIPTION + p pid process ID + tg tgid thread group ID + n name task command name + st stacktrace stack trace of the page allocation + T txt full text of block + ft free_ts timestamp of the page when it was released + at alloc_ts timestamp of the page when it was allocated + ator allocator memory allocator for pages + + For --curl option: + KEY LONG DESCRIPTION p pid process ID tg tgid thread group ID n name task command name f free whether the page has been released or not - st stacktrace stace trace of the page allocation + st stacktrace stack trace of the page allocation + ator allocator memory allocator for pages diff --git a/Documentation/vm/page_reclaim.rst b/Documentation/vm/page_reclaim.rst new file mode 100644 index 000000000000..50a30b7f8ac3 --- /dev/null +++ b/Documentation/vm/page_reclaim.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Page Reclaim +============ diff --git a/Documentation/vm/page_tables.rst b/Documentation/vm/page_tables.rst new file mode 100644 index 000000000000..96939571d7bc --- /dev/null +++ b/Documentation/vm/page_tables.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========== +Page Tables +=========== diff --git a/Documentation/vm/physical_memory.rst b/Documentation/vm/physical_memory.rst new file mode 100644 index 000000000000..2ab7b8c1c863 --- /dev/null +++ b/Documentation/vm/physical_memory.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Physical Memory +=============== diff --git a/Documentation/vm/process_addrs.rst b/Documentation/vm/process_addrs.rst new file mode 100644 index 000000000000..e8618fbc62c9 --- /dev/null +++ b/Documentation/vm/process_addrs.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +Process Addresses +================= diff --git a/Documentation/vm/shmfs.rst b/Documentation/vm/shmfs.rst new file mode 100644 index 000000000000..8b01ebb4c30e --- /dev/null +++ b/Documentation/vm/shmfs.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Shared Memory Filesystem +======================== diff --git a/Documentation/vm/slab.rst b/Documentation/vm/slab.rst new file mode 100644 index 000000000000..87d5a5bb172f --- /dev/null +++ b/Documentation/vm/slab.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Slab Allocation +=============== diff --git a/Documentation/vm/slub.rst b/Documentation/vm/slub.rst index d3028554b1e9..43063ade737a 100644 --- a/Documentation/vm/slub.rst +++ b/Documentation/vm/slub.rst @@ -384,5 +384,69 @@ c) Execute ``slabinfo-gnuplot.sh`` in '-t' mode, passing all of the 40,60`` range will plot only samples collected between 40th and 60th seconds). + +DebugFS files for SLUB +====================== + +For more information about current state of SLUB caches with the user tracking +debug option enabled, debugfs files are available, typically under +/sys/kernel/debug/slab/<cache>/ (created only for caches with enabled user +tracking). There are 2 types of these files with the following debug +information: + +1. alloc_traces:: + + Prints information about unique allocation traces of the currently + allocated objects. The output is sorted by frequency of each trace. + + Information in the output: + Number of objects, allocating function, minimal/average/maximal jiffies since alloc, + pid range of the allocating processes, cpu mask of allocating cpus, and stack trace. + + Example::: + + 1085 populate_error_injection_list+0x97/0x110 age=166678/166680/166682 pid=1 cpus=1:: + __slab_alloc+0x6d/0x90 + kmem_cache_alloc_trace+0x2eb/0x300 + populate_error_injection_list+0x97/0x110 + init_error_injection+0x1b/0x71 + do_one_initcall+0x5f/0x2d0 + kernel_init_freeable+0x26f/0x2d7 + kernel_init+0xe/0x118 + ret_from_fork+0x22/0x30 + + +2. free_traces:: + + Prints information about unique freeing traces of the currently allocated + objects. The freeing traces thus come from the previous life-cycle of the + objects and are reported as not available for objects allocated for the first + time. The output is sorted by frequency of each trace. + + Information in the output: + Number of objects, freeing function, minimal/average/maximal jiffies since free, + pid range of the freeing processes, cpu mask of freeing cpus, and stack trace. + + Example::: + + 1980 <not-available> age=4294912290 pid=0 cpus=0 + 51 acpi_ut_update_ref_count+0x6a6/0x782 age=236886/237027/237772 pid=1 cpus=1 + kfree+0x2db/0x420 + acpi_ut_update_ref_count+0x6a6/0x782 + acpi_ut_update_object_reference+0x1ad/0x234 + acpi_ut_remove_reference+0x7d/0x84 + acpi_rs_get_prt_method_data+0x97/0xd6 + acpi_get_irq_routing_table+0x82/0xc4 + acpi_pci_irq_find_prt_entry+0x8e/0x2e0 + acpi_pci_irq_lookup+0x3a/0x1e0 + acpi_pci_irq_enable+0x77/0x240 + pcibios_enable_device+0x39/0x40 + do_pci_enable_device.part.0+0x5d/0xe0 + pci_enable_device_flags+0xfc/0x120 + pci_enable_device+0x13/0x20 + virtio_pci_probe+0x9e/0x170 + local_pci_probe+0x48/0x80 + pci_device_probe+0x105/0x1c0 + Christoph Lameter, May 30, 2007 Sergey Senozhatsky, October 23, 2015 diff --git a/Documentation/vm/swap.rst b/Documentation/vm/swap.rst new file mode 100644 index 000000000000..78819bd4d745 --- /dev/null +++ b/Documentation/vm/swap.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==== +Swap +==== diff --git a/Documentation/vm/vmalloc.rst b/Documentation/vm/vmalloc.rst new file mode 100644 index 000000000000..363fe20d6b9f --- /dev/null +++ b/Documentation/vm/vmalloc.rst @@ -0,0 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Virtually Contiguous Memory Allocation +====================================== diff --git a/Documentation/vm/vmemmap_dedup.rst b/Documentation/vm/vmemmap_dedup.rst new file mode 100644 index 000000000000..c9c495f62d12 --- /dev/null +++ b/Documentation/vm/vmemmap_dedup.rst @@ -0,0 +1,223 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================= +A vmemmap diet for HugeTLB and Device DAX +========================================= + +HugeTLB +======= + +The struct page structures (page structs) are used to describe a physical +page frame. By default, there is a one-to-one mapping from a page frame to +it's corresponding page struct. + +HugeTLB pages consist of multiple base page size pages and is supported by many +architectures. See Documentation/admin-guide/mm/hugetlbpage.rst for more +details. On the x86-64 architecture, HugeTLB pages of size 2MB and 1GB are +currently supported. Since the base page size on x86 is 4KB, a 2MB HugeTLB page +consists of 512 base pages and a 1GB HugeTLB page consists of 4096 base pages. +For each base page, there is a corresponding page struct. + +Within the HugeTLB subsystem, only the first 4 page structs are used to +contain unique information about a HugeTLB page. __NR_USED_SUBPAGE provides +this upper limit. The only 'useful' information in the remaining page structs +is the compound_head field, and this field is the same for all tail pages. + +By removing redundant page structs for HugeTLB pages, memory can be returned +to the buddy allocator for other uses. + +Different architectures support different HugeTLB pages. For example, the +following table is the HugeTLB page size supported by x86 and arm64 +architectures. Because arm64 supports 4k, 16k, and 64k base pages and +supports contiguous entries, so it supports many kinds of sizes of HugeTLB +page. + ++--------------+-----------+-----------------------------------------------+ +| Architecture | Page Size | HugeTLB Page Size | ++--------------+-----------+-----------+-----------+-----------+-----------+ +| x86-64 | 4KB | 2MB | 1GB | | | ++--------------+-----------+-----------+-----------+-----------+-----------+ +| | 4KB | 64KB | 2MB | 32MB | 1GB | +| +-----------+-----------+-----------+-----------+-----------+ +| arm64 | 16KB | 2MB | 32MB | 1GB | | +| +-----------+-----------+-----------+-----------+-----------+ +| | 64KB | 2MB | 512MB | 16GB | | ++--------------+-----------+-----------+-----------+-----------+-----------+ + +When the system boot up, every HugeTLB page has more than one struct page +structs which size is (unit: pages):: + + struct_size = HugeTLB_Size / PAGE_SIZE * sizeof(struct page) / PAGE_SIZE + +Where HugeTLB_Size is the size of the HugeTLB page. We know that the size +of the HugeTLB page is always n times PAGE_SIZE. So we can get the following +relationship:: + + HugeTLB_Size = n * PAGE_SIZE + +Then:: + + struct_size = n * PAGE_SIZE / PAGE_SIZE * sizeof(struct page) / PAGE_SIZE + = n * sizeof(struct page) / PAGE_SIZE + +We can use huge mapping at the pud/pmd level for the HugeTLB page. + +For the HugeTLB page of the pmd level mapping, then:: + + struct_size = n * sizeof(struct page) / PAGE_SIZE + = PAGE_SIZE / sizeof(pte_t) * sizeof(struct page) / PAGE_SIZE + = sizeof(struct page) / sizeof(pte_t) + = 64 / 8 + = 8 (pages) + +Where n is how many pte entries which one page can contains. So the value of +n is (PAGE_SIZE / sizeof(pte_t)). + +This optimization only supports 64-bit system, so the value of sizeof(pte_t) +is 8. And this optimization also applicable only when the size of struct page +is a power of two. In most cases, the size of struct page is 64 bytes (e.g. +x86-64 and arm64). So if we use pmd level mapping for a HugeTLB page, the +size of struct page structs of it is 8 page frames which size depends on the +size of the base page. + +For the HugeTLB page of the pud level mapping, then:: + + struct_size = PAGE_SIZE / sizeof(pmd_t) * struct_size(pmd) + = PAGE_SIZE / 8 * 8 (pages) + = PAGE_SIZE (pages) + +Where the struct_size(pmd) is the size of the struct page structs of a +HugeTLB page of the pmd level mapping. + +E.g.: A 2MB HugeTLB page on x86_64 consists in 8 page frames while 1GB +HugeTLB page consists in 4096. + +Next, we take the pmd level mapping of the HugeTLB page as an example to +show the internal implementation of this optimization. There are 8 pages +struct page structs associated with a HugeTLB page which is pmd mapped. + +Here is how things look before optimization:: + + HugeTLB struct pages(8 pages) page frame(8 pages) + +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ + | | | 0 | -------------> | 0 | + | | +-----------+ +-----------+ + | | | 1 | -------------> | 1 | + | | +-----------+ +-----------+ + | | | 2 | -------------> | 2 | + | | +-----------+ +-----------+ + | | | 3 | -------------> | 3 | + | | +-----------+ +-----------+ + | | | 4 | -------------> | 4 | + | PMD | +-----------+ +-----------+ + | level | | 5 | -------------> | 5 | + | mapping | +-----------+ +-----------+ + | | | 6 | -------------> | 6 | + | | +-----------+ +-----------+ + | | | 7 | -------------> | 7 | + | | +-----------+ +-----------+ + | | + | | + | | + +-----------+ + +The value of page->compound_head is the same for all tail pages. The first +page of page structs (page 0) associated with the HugeTLB page contains the 4 +page structs necessary to describe the HugeTLB. The only use of the remaining +pages of page structs (page 1 to page 7) is to point to page->compound_head. +Therefore, we can remap pages 1 to 7 to page 0. Only 1 page of page structs +will be used for each HugeTLB page. This will allow us to free the remaining +7 pages to the buddy allocator. + +Here is how things look after remapping:: + + HugeTLB struct pages(8 pages) page frame(8 pages) + +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ + | | | 0 | -------------> | 0 | + | | +-----------+ +-----------+ + | | | 1 | ---------------^ ^ ^ ^ ^ ^ ^ + | | +-----------+ | | | | | | + | | | 2 | -----------------+ | | | | | + | | +-----------+ | | | | | + | | | 3 | -------------------+ | | | | + | | +-----------+ | | | | + | | | 4 | ---------------------+ | | | + | PMD | +-----------+ | | | + | level | | 5 | -----------------------+ | | + | mapping | +-----------+ | | + | | | 6 | -------------------------+ | + | | +-----------+ | + | | | 7 | ---------------------------+ + | | +-----------+ + | | + | | + | | + +-----------+ + +When a HugeTLB is freed to the buddy system, we should allocate 7 pages for +vmemmap pages and restore the previous mapping relationship. + +For the HugeTLB page of the pud level mapping. It is similar to the former. +We also can use this approach to free (PAGE_SIZE - 1) vmemmap pages. + +Apart from the HugeTLB page of the pmd/pud level mapping, some architectures +(e.g. aarch64) provides a contiguous bit in the translation table entries +that hints to the MMU to indicate that it is one of a contiguous set of +entries that can be cached in a single TLB entry. + +The contiguous bit is used to increase the mapping size at the pmd and pte +(last) level. So this type of HugeTLB page can be optimized only when its +size of the struct page structs is greater than 1 page. + +Notice: The head vmemmap page is not freed to the buddy allocator and all +tail vmemmap pages are mapped to the head vmemmap page frame. So we can see +more than one struct page struct with PG_head (e.g. 8 per 2 MB HugeTLB page) +associated with each HugeTLB page. The compound_head() can handle this +correctly (more details refer to the comment above compound_head()). + +Device DAX +========== + +The device-dax interface uses the same tail deduplication technique explained +in the previous chapter, except when used with the vmemmap in +the device (altmap). + +The following page sizes are supported in DAX: PAGE_SIZE (4K on x86_64), +PMD_SIZE (2M on x86_64) and PUD_SIZE (1G on x86_64). + +The differences with HugeTLB are relatively minor. + +It only use 3 page structs for storing all information as opposed +to 4 on HugeTLB pages. + +There's no remapping of vmemmap given that device-dax memory is not part of +System RAM ranges initialized at boot. Thus the tail page deduplication +happens at a later stage when we populate the sections. HugeTLB reuses the +the head vmemmap page representing, whereas device-dax reuses the tail +vmemmap page. This results in only half of the savings compared to HugeTLB. + +Deduplicated tail pages are not mapped read-only. + +Here's how things look like on device-dax after the sections are populated:: + + +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ + | | | 0 | -------------> | 0 | + | | +-----------+ +-----------+ + | | | 1 | -------------> | 1 | + | | +-----------+ +-----------+ + | | | 2 | ----------------^ ^ ^ ^ ^ ^ + | | +-----------+ | | | | | + | | | 3 | ------------------+ | | | | + | | +-----------+ | | | | + | | | 4 | --------------------+ | | | + | PMD | +-----------+ | | | + | level | | 5 | ----------------------+ | | + | mapping | +-----------+ | | + | | | 6 | ------------------------+ | + | | +-----------+ | + | | | 7 | --------------------------+ + | | +-----------+ + | | + | | + | | + +-----------+ diff --git a/Documentation/w1/slaves/w1_therm.rst b/Documentation/w1/slaves/w1_therm.rst index c3c9ed7a356c..758dadba84f6 100644 --- a/Documentation/w1/slaves/w1_therm.rst +++ b/Documentation/w1/slaves/w1_therm.rst @@ -6,7 +6,8 @@ Supported chips: * Maxim ds18*20 based temperature sensors. * Maxim ds1825 based temperature sensors. - * GXCAS GC20MH01 temperature sensor. + * GXCAS GX20MH01 temperature sensor. + * Maxim MAX31850 thermoelement interface. Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru> @@ -15,7 +16,7 @@ Description ----------- w1_therm provides basic temperature conversion for ds18*20, ds28ea00, GX20MH01 -devices. +and MAX31850 devices. Supported family codes: @@ -137,3 +138,7 @@ bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. The device is powered up in 14-bit resolution mode. The conversion times specified in the datasheet are too low and have to be increased. The device supports driver features ``1`` and ``2``. + +MAX31850 device shares family number 0x3B with DS1825. The device is generally +compatible with DS1825. The higher 4 bits of Config register read all 1, +indicating 15, but the device is always operating in 14-bit resolution mode. diff --git a/Documentation/x86/exception-tables.rst b/Documentation/x86/exception-tables.rst index de58110c5ffd..efde1fef4fbd 100644 --- a/Documentation/x86/exception-tables.rst +++ b/Documentation/x86/exception-tables.rst @@ -32,14 +32,14 @@ Whenever the kernel tries to access an address that is currently not accessible, the CPU generates a page fault exception and calls the page fault handler:: - void do_page_fault(struct pt_regs *regs, unsigned long error_code) + void exc_page_fault(struct pt_regs *regs, unsigned long error_code) in arch/x86/mm/fault.c. The parameters on the stack are set up by the low level assembly glue in arch/x86/entry/entry_32.S. The parameter regs is a pointer to the saved registers on the stack, error_code contains a reason code for the exception. -do_page_fault first obtains the unaccessible address from the CPU +exc_page_fault() first obtains the inaccessible address from the CPU control register CR2. If the address is within the virtual address space of the process, the fault probably occurred, because the page was not swapped in, write protected or something similar. However, @@ -57,10 +57,10 @@ Where does fixup point to? Since we jump to the contents of fixup, fixup obviously points to executable code. This code is hidden inside the user access macros. -I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h +I have picked the get_user() macro defined in arch/x86/include/asm/uaccess.h as an example. The definition is somewhat hard to follow, so let's peek at the code generated by the preprocessor and the compiler. I selected -the get_user call in drivers/char/sysrq.c for a detailed examination. +the get_user() call in drivers/char/sysrq.c for a detailed examination. The original code in sysrq.c line 587:: @@ -281,12 +281,15 @@ vma occurs? > c017e7a5 <do_con_write+e1> movb (%ebx),%dl #. MMU generates exception -#. CPU calls do_page_fault -#. do page fault calls search_exception_table (regs->eip == c017e7a5); -#. search_exception_table looks up the address c017e7a5 in the +#. CPU calls exc_page_fault() +#. exc_page_fault() calls do_user_addr_fault() +#. do_user_addr_fault() calls kernelmode_fixup_or_oops() +#. kernelmode_fixup_or_oops() calls fixup_exception() (regs->eip == c017e7a5); +#. fixup_exception() calls search_exception_tables() +#. search_exception_tables() looks up the address c017e7a5 in the exception table (i.e. the contents of the ELF section __ex_table) and returns the address of the associated fault handle code c0199ff5. -#. do_page_fault modifies its own return address to point to the fault +#. fixup_exception() modifies its own return address to point to the fault handle code and returns. #. execution continues in the fault handling code. #. a) EAX becomes -EFAULT (== -14) @@ -298,9 +301,9 @@ The steps 8a to 8c in a certain way emulate the faulting instruction. That's it, mostly. If you look at our example, you might ask why we set EAX to -EFAULT in the exception handler code. Well, the -get_user macro actually returns a value: 0, if the user access was +get_user() macro actually returns a value: 0, if the user access was successful, -EFAULT on failure. Our original code did not test this -return value, however the inline assembly code in get_user tries to +return value, however the inline assembly code in get_user() tries to return -EFAULT. GCC selected EAX to return this value. NOTE: diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst index ba4f90e3819d..c73d133fd37c 100644 --- a/Documentation/x86/index.rst +++ b/Documentation/x86/index.rst @@ -22,7 +22,7 @@ x86-specific Documentation mtrr pat intel-hfi - intel-iommu + iommu intel_txt amd-memory-encryption amd_hsmp diff --git a/Documentation/x86/intel-iommu.rst b/Documentation/x86/intel-iommu.rst deleted file mode 100644 index 099f13d51d5f..000000000000 --- a/Documentation/x86/intel-iommu.rst +++ /dev/null @@ -1,115 +0,0 @@ -=================== -Linux IOMMU Support -=================== - -The architecture spec can be obtained from the below location. - -http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf - -This guide gives a quick cheat sheet for some basic understanding. - -Some Keywords - -- DMAR - DMA remapping -- DRHD - DMA Remapping Hardware Unit Definition -- RMRR - Reserved memory Region Reporting Structure -- ZLR - Zero length reads from PCI devices -- IOVA - IO Virtual address. - -Basic stuff ------------ - -ACPI enumerates and lists the different DMA engines in the platform, and -device scope relationships between PCI devices and which DMA engine controls -them. - -What is RMRR? -------------- - -There are some devices the BIOS controls, for e.g USB devices to perform -PS2 emulation. The regions of memory used for these devices are marked -reserved in the e820 map. When we turn on DMA translation, DMA to those -regions will fail. Hence BIOS uses RMRR to specify these regions along with -devices that need to access these regions. OS is expected to setup -unity mappings for these regions for these devices to access these regions. - -How is IOVA generated? ----------------------- - -Well behaved drivers call pci_map_*() calls before sending command to device -that needs to perform DMA. Once DMA is completed and mapping is no longer -required, device performs a pci_unmap_*() calls to unmap the region. - -The Intel IOMMU driver allocates a virtual address per domain. Each PCIE -device has its own domain (hence protection). Devices under p2p bridges -share the virtual address with all devices under the p2p bridge due to -transaction id aliasing for p2p bridges. - -IOVA generation is pretty generic. We used the same technique as vmalloc() -but these are not global address spaces, but separate for each domain. -Different DMA engines may support different number of domains. - -We also allocate guard pages with each mapping, so we can attempt to catch -any overflow that might happen. - - -Graphics Problems? ------------------- -If you encounter issues with graphics devices, you can try adding -option intel_iommu=igfx_off to turn off the integrated graphics engine. -If this fixes anything, please ensure you file a bug reporting the problem. - -Some exceptions to IOVA ------------------------ -Interrupt ranges are not address translated, (0xfee00000 - 0xfeefffff). -The same is true for peer to peer transactions. Hence we reserve the -address from PCI MMIO ranges so they are not allocated for IOVA addresses. - - -Fault reporting ---------------- -When errors are reported, the DMA engine signals via an interrupt. The fault -reason and device that caused it with fault reason is printed on console. - -See below for sample. - - -Boot Message Sample -------------------- - -Something like this gets printed indicating presence of DMAR tables -in ACPI. - -ACPI: DMAR (v001 A M I OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x000000007f5b5ef0 - -When DMAR is being processed and initialized by ACPI, prints DMAR locations -and any RMRR's processed:: - - ACPI DMAR:Host address width 36 - ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000 - ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000 - ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000 - ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff - ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff - -When DMAR is enabled for use, you will notice.. - -PCI-DMA: Using DMAR IOMMU -------------------------- - -Fault reporting -^^^^^^^^^^^^^^^ - -:: - - DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000 - DMAR:[fault reason 05] PTE Write access is not set - DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000 - DMAR:[fault reason 05] PTE Write access is not set - -TBD ----- - -- For compatibility testing, could use unity map domain for all devices, just - provide a 1-1 for all useful memory under a single domain for all devices. -- API for paravirt ops for abstracting functionality for VMM folks. diff --git a/Documentation/x86/iommu.rst b/Documentation/x86/iommu.rst new file mode 100644 index 000000000000..42c7a6faa39a --- /dev/null +++ b/Documentation/x86/iommu.rst @@ -0,0 +1,151 @@ +================= +x86 IOMMU Support +================= + +The architecture specs can be obtained from the below locations. + +- Intel: http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf +- AMD: https://www.amd.com/system/files/TechDocs/48882_IOMMU.pdf + +This guide gives a quick cheat sheet for some basic understanding. + +Basic stuff +----------- + +ACPI enumerates and lists the different IOMMUs on the platform, and +device scope relationships between devices and which IOMMU controls +them. + +Some ACPI Keywords: + +- DMAR - Intel DMA Remapping table +- DRHD - Intel DMA Remapping Hardware Unit Definition +- RMRR - Intel Reserved Memory Region Reporting Structure +- IVRS - AMD I/O Virtualization Reporting Structure +- IVDB - AMD I/O Virtualization Definition Block +- IVHD - AMD I/O Virtualization Hardware Definition + +What is Intel RMRR? +^^^^^^^^^^^^^^^^^^^ + +There are some devices the BIOS controls, for e.g USB devices to perform +PS2 emulation. The regions of memory used for these devices are marked +reserved in the e820 map. When we turn on DMA translation, DMA to those +regions will fail. Hence BIOS uses RMRR to specify these regions along with +devices that need to access these regions. OS is expected to setup +unity mappings for these regions for these devices to access these regions. + +What is AMD IVRS? +^^^^^^^^^^^^^^^^^ + +The architecture defines an ACPI-compatible data structure called an I/O +Virtualization Reporting Structure (IVRS) that is used to convey information +related to I/O virtualization to system software. The IVRS describes the +configuration and capabilities of the IOMMUs contained in the platform as +well as information about the devices that each IOMMU virtualizes. + +The IVRS provides information about the following: + +- IOMMUs present in the platform including their capabilities and proper configuration +- System I/O topology relevant to each IOMMU +- Peripheral devices that cannot be otherwise enumerated +- Memory regions used by SMI/SMM, platform firmware, and platform hardware. These are generally exclusion ranges to be configured by system software. + +How is an I/O Virtual Address (IOVA) generated? +----------------------------------------------- + +Well behaved drivers call dma_map_*() calls before sending command to device +that needs to perform DMA. Once DMA is completed and mapping is no longer +required, driver performs dma_unmap_*() calls to unmap the region. + +Intel Specific Notes +-------------------- + +Graphics Problems? +^^^^^^^^^^^^^^^^^^ + +If you encounter issues with graphics devices, you can try adding +option intel_iommu=igfx_off to turn off the integrated graphics engine. +If this fixes anything, please ensure you file a bug reporting the problem. + +Some exceptions to IOVA +^^^^^^^^^^^^^^^^^^^^^^^ + +Interrupt ranges are not address translated, (0xfee00000 - 0xfeefffff). +The same is true for peer to peer transactions. Hence we reserve the +address from PCI MMIO ranges so they are not allocated for IOVA addresses. + +AMD Specific Notes +------------------ + +Graphics Problems? +^^^^^^^^^^^^^^^^^^ + +If you encounter issues with integrated graphics devices, you can try adding +option iommu=pt to the kernel command line use a 1:1 mapping for the IOMMU. If +this fixes anything, please ensure you file a bug reporting the problem. + +Fault reporting +--------------- +When errors are reported, the IOMMU signals via an interrupt. The fault +reason and device that caused it is printed on the console. + + +Kernel Log Samples +------------------ + +Intel Boot Messages +^^^^^^^^^^^^^^^^^^^ + +Something like this gets printed indicating presence of DMAR tables +in ACPI: + +:: + + ACPI: DMAR (v001 A M I OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x000000007f5b5ef0 + +When DMAR is being processed and initialized by ACPI, prints DMAR locations +and any RMRR's processed: + +:: + + ACPI DMAR:Host address width 36 + ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000 + ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000 + ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000 + ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff + ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff + +When DMAR is enabled for use, you will notice: + +:: + + PCI-DMA: Using DMAR IOMMU + +Intel Fault reporting +^^^^^^^^^^^^^^^^^^^^^ + +:: + + DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000 + DMAR:[fault reason 05] PTE Write access is not set + DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000 + DMAR:[fault reason 05] PTE Write access is not set + +AMD Boot Messages +^^^^^^^^^^^^^^^^^ + +Something like this gets printed indicating presence of the IOMMU: + +:: + + iommu: Default domain type: Translated + iommu: DMA domain TLB invalidation policy: lazy mode + +AMD Fault reporting +^^^^^^^^^^^^^^^^^^^ + +:: + + AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000] + AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000] |