1 files changed, 0 insertions, 109 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
deleted file mode 100644
index fbdd1a716a1e..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-CSR SiRFatlas7 pinmux controller
-
-Required properties:
-- compatible	: "sirf,atlas7-ioc"
-- reg		: Address range of the pinctrl registers
-
-For example, pinctrl might have properties like the following:
-	pinctrl: ioc@18880000 {
-			compatible = "sirf,atlas7-ioc";
-			reg = <0x18880000 0x1000>;
-
-			a_ac97_pmx: ac97@0 {
-				ac97 {
-					groups = "audio_ac97_grp";
-					function = "audio_ac97";
-				};
-			};
-
-			...
-
-			sd2_pmx: sd2@0 {
-				sd2 {
-					groups = "sd2_grp0";
-					function = "sd2";
-				};
-			};
-
-			...
-
-
-			sample0_cfg: sample0@0 {
-				sample0 {
-					pins = "ldd_0", "ldd_1";
-					bias-pull-up;
-				};
-			};
-
-			sample1_cfg: sample1@0 {
-				sample1 {
-					pins = "ldd_2", "ldd_3";
-					input-schmitt-enable;
-				};
-			};
-
-			sample2_cfg: sample2@0 {
-				sample2 {
-					groups = "uart4_nopause_grp";
-					bias-pull-down;
-				};
-			};
-
-			sample3_cfg: sample3@0 {
-				sample3 {
-					pins = "ldd_4", "ldd_5";
-					drive-strength = <2>;
-				};
-			};
-	};
-
-Please refer to pinctrl-bindings.txt in this directory for details of the common
-pinctrl bindings used by client devices.
-
-SiRFatlas7's pinmux nodes act as a container for an arbitrary number of subnodes.
-Each of these subnodes represents some desired configuration for a group of pins.
-
-Required subnode-properties:
-- groups : An array of strings. Each string contains the name of a group.
-- function: A string containing the name of the function to mux to the
-  group.
-
-  Valid values for group and function names can be found from looking at the
-  group and function arrays in driver files:
-  drivers/pinctrl/pinctrl-sirf.c
-
-For example, pinctrl might have subnodes like the following:
-	sd0_pmx: sd0@0 {
-		sd0 {
-			groups = "sd0_grp";
-			function = "sd0";
-		};
-	};
-
-	sd1_pmx0: sd1@0 {
-		sd1 {
-			groups = "sd1_grp0";
-			function = "sd1_m0";
-		};
-	};
-
-	sd1_pmx1: sd1@1 {
-		sd1 {
-			groups = "sd1_grp1";
-			function = "sd1_m1";
-		};
-	};
-
-For a specific board, if it wants to use sd1,
-it can add the following to its board-specific .dts file.
-sd1: sd@12340000 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_pmx0>;
-}
-
-or
-
-sd1: sd@12340000 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_pmx1>;
-}