diff options
34 files changed, 1862 insertions, 181 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt new file mode 100644 index 000000000000..ea3178bc9ddd --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt @@ -0,0 +1,50 @@ +* STMicroelectronics : NFC Transceiver ST95HF + +ST NFC Transceiver is required to attach with SPI bus. +ST95HF node should be defined in DT as SPI slave device of SPI +master with which ST95HF transceiver is physically connected. +The properties defined below are required to be the part of DT +to include ST95HF transceiver into the platform. + +Required properties: +=================== +- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus. + +- compatible: should be "st,st95hf" for ST95HF NFC transceiver + +- spi-max-frequency: Max. operating SPI frequency for ST95HF + transceiver. + +- enable-gpio: GPIO line to enable ST95HF transceiver. + +- interrupt-parent : Standard way to specify the controller to which + ST95HF transceiver's interrupt is routed. + +- interrupts : Standard way to define ST95HF transceiver's out + interrupt. + +Optional property: +================= +- st95hfvin-supply : This is an optional property. It contains a + phandle to ST95HF transceiver's regulator supply node in DT. + +Example: +======= +spi@9840000 { + reg = <0x9840000 0x110>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&pio0 4>; + status = "okay"; + + st95hf@0{ + reg = <0>; + compatible = "st,st95hf"; + status = "okay"; + spi-max-frequency = <1000000>; + enable-gpio = <&pio4 0>; + interrupt-parent = <&pio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + }; + +}; diff --git a/MAINTAINERS b/MAINTAINERS index b74287301edf..74b84d44ee98 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7523,7 +7523,12 @@ F: net/nfc/ F: include/net/nfc/ F: include/uapi/linux/nfc.h F: drivers/nfc/ +F: include/linux/platform_data/microread.h +F: include/linux/platform_data/nfcmrvl.h +F: include/linux/platform_data/nxp-nci.h F: include/linux/platform_data/pn544.h +F: include/linux/platform_data/st21nfca.h +F: include/linux/platform_data/st-nci.h F: Documentation/devicetree/bindings/net/nfc/ NFS, SUNRPC, AND LOCKD CLIENTS diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 0d6003dee3af..7437c9dfd8fc 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -76,4 +76,5 @@ source "drivers/nfc/st21nfca/Kconfig" source "drivers/nfc/st-nci/Kconfig" source "drivers/nfc/nxp-nci/Kconfig" source "drivers/nfc/s3fwrn5/Kconfig" +source "drivers/nfc/st95hf/Kconfig" endmenu diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index e3621416a48e..0a99e67daa10 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_NFC_ST21NFCA) += st21nfca/ obj-$(CONFIG_NFC_ST_NCI) += st-nci/ obj-$(CONFIG_NFC_NXP_NCI) += nxp-nci/ obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5/ +obj-$(CONFIG_NFC_ST95HF) += st95hf/ diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c index 532db28145c7..5e797d5c38ed 100644 --- a/drivers/nfc/fdp/i2c.c +++ b/drivers/nfc/fdp/i2c.c @@ -298,6 +298,12 @@ static int fdp_nci_i2c_probe(struct i2c_client *client, return -ENODEV; } + /* Checking if we have an irq */ + if (client->irq <= 0) { + nfc_err(dev, "IRQ not present\n"); + return -ENODEV; + } + phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy), GFP_KERNEL); if (!phy) @@ -307,12 +313,6 @@ static int fdp_nci_i2c_probe(struct i2c_client *client, phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; i2c_set_clientdata(client, phy); - /* Checking if we have an irq */ - if (client->irq <= 0) { - dev_err(dev, "IRQ not present\n"); - return -ENODEV; - } - r = request_threaded_irq(client->irq, NULL, fdp_nci_i2c_irq_thread_fn, IRQF_TRIGGER_RISING | IRQF_ONESHOT, FDP_I2C_DRIVER_NAME, phy); diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c index daf352597ef8..918e8f2eac47 100644 --- a/drivers/nfc/microread/i2c.c +++ b/drivers/nfc/microread/i2c.c @@ -50,8 +50,6 @@ struct microread_i2c_phy { struct i2c_client *i2c_dev; struct nfc_hci_dev *hdev; - int irq; - int hard_fault; /* * < 0 if hardware error occured (e.g. i2c err) * and prevents normal operation. diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c index 26ac9e5fa1ab..93aaca586858 100644 --- a/drivers/nfc/nfcsim.c +++ b/drivers/nfc/nfcsim.c @@ -32,6 +32,8 @@ #define NFCSIM_POLL_TARGET 2 #define NFCSIM_POLL_DUAL (NFCSIM_POLL_INITIATOR | NFCSIM_POLL_TARGET) +#define RX_DEFAULT_DELAY 5 + struct nfcsim { struct nfc_dev *nfc_dev; @@ -51,6 +53,8 @@ struct nfcsim { u8 initiator; + u32 rx_delay; + data_exchange_cb_t cb; void *cb_context; @@ -320,10 +324,9 @@ static int nfcsim_tx(struct nfc_dev *nfc_dev, struct nfc_target *target, * If packet transmission occurs immediately between them, we have a * non-stop flow of several tens of thousands SYMM packets per second * and a burning cpu. - * - * TODO: Add support for a sysfs entry to control this delay. */ - queue_delayed_work(wq, &peer->recv_work, msecs_to_jiffies(5)); + queue_delayed_work(wq, &peer->recv_work, + msecs_to_jiffies(dev->rx_delay)); mutex_unlock(&peer->lock); @@ -461,6 +464,7 @@ static struct nfcsim *nfcsim_init_dev(void) if (rc) goto free_nfc_dev; + dev->rx_delay = RX_DEFAULT_DELAY; return dev; free_nfc_dev: diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c index df4333c7ee0f..11520f472f98 100644 --- a/drivers/nfc/nxp-nci/i2c.c +++ b/drivers/nfc/nxp-nci/i2c.c @@ -52,7 +52,6 @@ struct nxp_nci_i2c_phy { unsigned int gpio_en; unsigned int gpio_fw; - unsigned int gpio_irq; int hard_fault; /* * < 0 if hardware error occurred (e.g. i2c err) @@ -85,7 +84,7 @@ static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb) return phy->hard_fault; r = i2c_master_send(client, skb->data, skb->len); - if (r == -EREMOTEIO) { + if (r < 0) { /* Retry, chip was in standby */ usleep_range(110000, 120000); r = i2c_master_send(client, skb->data, skb->len); @@ -264,8 +263,6 @@ exit_irq_none: return IRQ_NONE; } -#ifdef CONFIG_OF - static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) { struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); @@ -294,48 +291,24 @@ static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) } phy->gpio_fw = r; - r = irq_of_parse_and_map(pp, 0); - if (r < 0) { - nfc_err(&client->dev, "Unable to get irq, error: %d\n", r); - return r; - } - client->irq = r; - return 0; } -#else - -static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) -{ - return -ENODEV; -} - -#endif - static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy) { struct i2c_client *client = phy->i2c_dev; - struct gpio_desc *gpiod_en, *gpiod_fw, *gpiod_irq; + struct gpio_desc *gpiod_en, *gpiod_fw; gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW); gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW); - gpiod_irq = devm_gpiod_get_index(&client->dev, NULL, 0, GPIOD_IN); - if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw) || IS_ERR(gpiod_irq)) { + if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) { nfc_err(&client->dev, "No GPIOs\n"); return -EINVAL; } - client->irq = gpiod_to_irq(gpiod_irq); - if (client->irq < 0) { - nfc_err(&client->dev, "No IRQ\n"); - return -EINVAL; - } - phy->gpio_en = desc_to_gpio(gpiod_en); phy->gpio_fw = desc_to_gpio(gpiod_fw); - phy->gpio_irq = desc_to_gpio(gpiod_irq); return 0; } @@ -374,7 +347,6 @@ static int nxp_nci_i2c_probe(struct i2c_client *client, } else if (pdata) { phy->gpio_en = pdata->gpio_en; phy->gpio_fw = pdata->gpio_fw; - client->irq = pdata->irq; } else if (ACPI_HANDLE(&client->dev)) { r = nxp_nci_i2c_acpi_config(phy); if (r < 0) diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index fa75c53f3fa5..76c318444304 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -166,7 +166,6 @@ struct pn544_i2c_phy { struct nfc_hci_dev *hdev; unsigned int gpio_en; - unsigned int gpio_irq; unsigned int gpio_fw; unsigned int en_polarity; @@ -879,9 +878,8 @@ static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client) { struct pn544_i2c_phy *phy = i2c_get_clientdata(client); const struct acpi_device_id *id; - struct gpio_desc *gpiod_en, *gpiod_irq, *gpiod_fw; + struct gpio_desc *gpiod_en, *gpiod_fw; struct device *dev; - int ret; if (!client) return -EINVAL; @@ -914,32 +912,9 @@ static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client) phy->gpio_fw = desc_to_gpio(gpiod_fw); - /* Get IRQ GPIO */ - gpiod_irq = devm_gpiod_get_index(dev, PN544_GPIO_NAME_IRQ, 0, - GPIOD_IN); - if (IS_ERR(gpiod_irq)) { - nfc_err(dev, "Unable to get IRQ GPIO\n"); - return -ENODEV; - } - - phy->gpio_irq = desc_to_gpio(gpiod_irq); - - /* Map the pin to an IRQ */ - ret = gpiod_to_irq(gpiod_irq); - if (ret < 0) { - nfc_err(dev, "Fail pin IRQ mapping\n"); - return ret; - } - - nfc_info(dev, "GPIO resource, no:%d irq:%d\n", - desc_to_gpio(gpiod_irq), ret); - client->irq = ret; - return 0; } -#ifdef CONFIG_OF - static int pn544_hci_i2c_of_request_resources(struct i2c_client *client) { struct pn544_i2c_phy *phy = i2c_get_clientdata(client); @@ -996,15 +971,6 @@ static int pn544_hci_i2c_of_request_resources(struct i2c_client *client) goto err_gpio_fw; } - /* IRQ */ - ret = irq_of_parse_and_map(pp, 0); - if (ret < 0) { - nfc_err(&client->dev, - "Unable to get irq, error: %d\n", ret); - goto err_gpio_fw; - } - client->irq = ret; - return 0; err_gpio_fw: @@ -1015,15 +981,6 @@ err_dt: return ret; } -#else - -static int pn544_hci_i2c_of_request_resources(struct i2c_client *client) -{ - return -ENODEV; -} - -#endif - static int pn544_hci_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1076,7 +1033,6 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE); phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET); - phy->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ); /* Using ACPI */ } else if (ACPI_HANDLE(&client->dev)) { r = pn544_hci_i2c_acpi_request_resources(client); diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c index 0d866ca295e3..9d9c8d57a042 100644 --- a/drivers/nfc/s3fwrn5/core.c +++ b/drivers/nfc/s3fwrn5/core.c @@ -147,7 +147,7 @@ static struct nci_ops s3fwrn5_nci_ops = { }; int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, - struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload) + const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload) { struct s3fwrn5_info *info; int ret; diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c index c61d8a308da4..3ed0adf6479b 100644 --- a/drivers/nfc/s3fwrn5/i2c.c +++ b/drivers/nfc/s3fwrn5/i2c.c @@ -125,7 +125,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) return 0; } -static struct s3fwrn5_phy_ops i2c_phy_ops = { +static const struct s3fwrn5_phy_ops i2c_phy_ops = { .set_wake = s3fwrn5_i2c_set_wake, .set_mode = s3fwrn5_i2c_set_mode, .get_mode = s3fwrn5_i2c_get_mode, diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h index 89210d4828b8..7d5e516036fb 100644 --- a/drivers/nfc/s3fwrn5/s3fwrn5.h +++ b/drivers/nfc/s3fwrn5/s3fwrn5.h @@ -44,7 +44,7 @@ struct s3fwrn5_info { void *phy_id; struct device *pdev; - struct s3fwrn5_phy_ops *phy_ops; + const struct s3fwrn5_phy_ops *phy_ops; unsigned int max_payload; struct s3fwrn5_fw_info fw_info; @@ -90,7 +90,7 @@ static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb) } int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, - struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload); + const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload); void s3fwrn5_remove(struct nci_dev *ndev); int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, diff --git a/drivers/nfc/st-nci/Kconfig b/drivers/nfc/st-nci/Kconfig index e7c6db9c5860..dc9b777d78f6 100644 --- a/drivers/nfc/st-nci/Kconfig +++ b/drivers/nfc/st-nci/Kconfig @@ -1,19 +1,14 @@ config NFC_ST_NCI - tristate "STMicroelectronics ST NCI NFC driver" - depends on NFC_NCI - default n + tristate ---help--- STMicroelectronics NFC NCI chips core driver. It implements the chipset NCI logic and hooks into the NFC kernel APIs. Physical layers will register against it. - To compile this driver as a module, choose m here. The module will - be called st-nci. - Say N if unsure. - config NFC_ST_NCI_I2C - tristate "NFC ST NCI i2c support" - depends on NFC_ST_NCI && I2C + tristate "STMicroelectronics ST NCI NFC driver (I2C)" + depends on NFC_NCI && I2C + select NFC_ST_NCI ---help--- This module adds support for an I2C interface to the STMicroelectronics NFC NCI chips familly. @@ -23,8 +18,9 @@ config NFC_ST_NCI_I2C Say N if unsure. config NFC_ST_NCI_SPI - tristate "NFC ST NCI spi support" - depends on NFC_ST_NCI && SPI + tristate "STMicroelectronics ST NCI NFC driver (SPI)" + depends on NFC_NCI && SPI + select NFC_ST_NCI ---help--- This module adds support for an SPI interface to the STMicroelectronics NFC NCI chips familly. diff --git a/drivers/nfc/st-nci/i2c.c b/drivers/nfc/st-nci/i2c.c index 15e3ce2d274c..8a56b5c6e4c4 100644 --- a/drivers/nfc/st-nci/i2c.c +++ b/drivers/nfc/st-nci/i2c.c @@ -20,8 +20,10 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> +#include <linux/acpi.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/nfc.h> @@ -40,11 +42,7 @@ #define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c" -static struct i2c_device_id st_nci_i2c_id_table[] = { - {ST_NCI_DRIVER_NAME, 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table); +#define ST_NCI_GPIO_NAME_RESET "clf_reset" struct st_nci_i2c_phy { struct i2c_client *i2c_dev; @@ -210,7 +208,43 @@ static struct nfc_phy_ops i2c_phy_ops = { .disable = st_nci_i2c_disable, }; -#ifdef CONFIG_OF +static int st_nci_i2c_acpi_request_resources(struct i2c_client *client) +{ + struct st_nci_i2c_phy *phy = i2c_get_clientdata(client); + const struct acpi_device_id *id; + struct gpio_desc *gpiod_reset; + struct device *dev; + + if (!client) + return -EINVAL; + + dev = &client->dev; + + /* Match the struct device against a given list of ACPI IDs */ + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return -ENODEV; + + /* Get RESET GPIO from ACPI */ + gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1, + GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_reset)) { + nfc_err(dev, "Unable to get RESET GPIO\n"); + return -ENODEV; + } + + phy->gpio_reset = desc_to_gpio(gpiod_reset); + + phy->irq_polarity = irq_get_trigger_type(client->irq); + + phy->se_status.is_ese_present = + device_property_present(dev, "ese-present"); + phy->se_status.is_uicc_present = + device_property_present(dev, "uicc-present"); + + return 0; +} + static int st_nci_i2c_of_request_resources(struct i2c_client *client) { struct st_nci_i2c_phy *phy = i2c_get_clientdata(client); @@ -232,7 +266,7 @@ static int st_nci_i2c_of_request_resources(struct i2c_client *client) /* GPIO request and configuration */ r = devm_gpio_request_one(&client->dev, gpio, - GPIOF_OUT_INIT_HIGH, "clf_reset"); + GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET); if (r) { nfc_err(&client->dev, "Failed to request reset pin\n"); return r; @@ -248,12 +282,6 @@ static int st_nci_i2c_of_request_resources(struct i2c_client *client) return 0; } -#else -static int st_nci_i2c_of_request_resources(struct i2c_client *client) -{ - return -ENODEV; -} -#endif static int st_nci_i2c_request_resources(struct i2c_client *client) { @@ -272,7 +300,8 @@ static int st_nci_i2c_request_resources(struct i2c_client *client) phy->irq_polarity = pdata->irq_polarity; r = devm_gpio_request_one(&client->dev, - phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset"); + phy->gpio_reset, GPIOF_OUT_INIT_HIGH, + ST_NCI_GPIO_NAME_RESET); if (r) { pr_err("%s : reset gpio_request failed\n", __FILE__); return r; @@ -322,6 +351,12 @@ static int st_nci_i2c_probe(struct i2c_client *client, "Cannot get platform resources\n"); return r; } + } else if (ACPI_HANDLE(&client->dev)) { + r = st_nci_i2c_acpi_request_resources(client); + if (r) { + nfc_err(&client->dev, "Cannot get ACPI data\n"); + return r; + } } else { nfc_err(&client->dev, "st_nci platform resources not available\n"); @@ -358,7 +393,19 @@ static int st_nci_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_OF +static struct i2c_device_id st_nci_i2c_id_table[] = { + {ST_NCI_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table); + +static const struct acpi_device_id st_nci_i2c_acpi_match[] = { + {"SMO2101"}, + {"SMO2102"}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match); + static const struct of_device_id of_st_nci_i2c_match[] = { { .compatible = "st,st21nfcb-i2c", }, { .compatible = "st,st21nfcb_i2c", }, @@ -366,19 +413,18 @@ static const struct of_device_id of_st_nci_i2c_match[] = { {} }; MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match); -#endif static struct i2c_driver st_nci_i2c_driver = { .driver = { .owner = THIS_MODULE, .name = ST_NCI_I2C_DRIVER_NAME, .of_match_table = of_match_ptr(of_st_nci_i2c_match), + .acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match), }, .probe = st_nci_i2c_probe, .id_table = st_nci_i2c_id_table, .remove = st_nci_i2c_remove, }; - module_i2c_driver(st_nci_i2c_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/st-nci/ndlc.c b/drivers/nfc/st-nci/ndlc.c index 0884b11001ef..50880d747b02 100644 --- a/drivers/nfc/st-nci/ndlc.c +++ b/drivers/nfc/st-nci/ndlc.c @@ -20,7 +20,6 @@ #include <net/nfc/nci_core.h> #include "st-nci.h" -#include "ndlc.h" #define NDLC_TIMER_T1 100 #define NDLC_TIMER_T1_WAIT 400 diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c index dbab722a0654..a53e5df803eb 100644 --- a/drivers/nfc/st-nci/se.c +++ b/drivers/nfc/st-nci/se.c @@ -331,7 +331,7 @@ static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev, switch (event) { case ST_NCI_EVT_CONNECTIVITY: - + r = nfc_se_connectivity(ndev->nfc_dev, host); break; case ST_NCI_EVT_TRANSACTION: /* According to specification etsi 102 622 @@ -392,7 +392,6 @@ void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, } EXPORT_SYMBOL_GPL(st_nci_hci_event_received); - void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd, struct sk_buff *skb) { diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c index d6519bb9dba5..821dfa950fa8 100644 --- a/drivers/nfc/st-nci/spi.c +++ b/drivers/nfc/st-nci/spi.c @@ -20,8 +20,10 @@ #include <linux/module.h> #include <linux/spi/spi.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> +#include <linux/acpi.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/nfc.h> @@ -34,18 +36,14 @@ /* ndlc header */ #define ST_NCI_FRAME_HEADROOM 1 -#define ST_NCI_FRAME_TAILROOM 0 +#define ST_NCI_FRAME_TAILROOM 0 #define ST_NCI_SPI_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */ #define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */ #define ST_NCI_SPI_DRIVER_NAME "st_nci_spi" -static struct spi_device_id st_nci_spi_id_table[] = { - {ST_NCI_SPI_DRIVER_NAME, 0}, - {} -}; -MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table); +#define ST_NCI_GPIO_NAME_RESET "clf_reset" struct st_nci_spi_phy { struct spi_device *spi_dev; @@ -225,7 +223,43 @@ static struct nfc_phy_ops spi_phy_ops = { .disable = st_nci_spi_disable, }; -#ifdef CONFIG_OF +static int st_nci_spi_acpi_request_resources(struct spi_device *spi_dev) +{ + struct st_nci_spi_phy *phy = spi_get_drvdata(spi_dev); + const struct acpi_device_id *id; + struct gpio_desc *gpiod_reset; + struct device *dev; + + if (!spi_dev) + return -EINVAL; + + dev = &spi_dev->dev; + + /* Match the struct device against a given list of ACPI IDs */ + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return -ENODEV; + + /* Get RESET GPIO from ACPI */ + gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1, + GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_reset)) { + nfc_err(dev, "Unable to get RESET GPIO\n"); + return -ENODEV; + } + + phy->gpio_reset = desc_to_gpio(gpiod_reset); + + phy->irq_polarity = irq_get_trigger_type(spi_dev->irq); + + phy->se_status.is_ese_present = + device_property_present(dev, "ese-present"); + phy->se_status.is_uicc_present = + device_property_present(dev, "uicc-present"); + + return 0; +} + static int st_nci_spi_of_request_resources(struct spi_device *dev) { struct st_nci_spi_phy *phy = spi_get_drvdata(dev); @@ -247,7 +281,7 @@ static int st_nci_spi_of_request_resources(struct spi_device *dev) /* GPIO request and configuration */ r = devm_gpio_request_one(&dev->dev, gpio, - GPIOF_OUT_INIT_HIGH, "clf_reset"); + GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET); if (r) { nfc_err(&dev->dev, "Failed to request reset pin\n"); return r; @@ -263,12 +297,6 @@ static int st_nci_spi_of_request_resources(struct spi_device *dev) return 0; } -#else -static int st_nci_spi_of_request_resources(struct spi_device *dev) -{ - return -ENODEV; -} -#endif static int st_nci_spi_request_resources(struct spi_device *dev) { @@ -287,7 +315,8 @@ static int st_nci_spi_request_resources(struct spi_device *dev) phy->irq_polarity = pdata->irq_polarity; r = devm_gpio_request_one(&dev->dev, - phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset"); + phy->gpio_reset, GPIOF_OUT_INIT_HIGH, + ST_NCI_GPIO_NAME_RESET); if (r) { pr_err("%s : reset gpio_request failed\n", __FILE__); return r; @@ -338,6 +367,12 @@ static int st_nci_spi_probe(struct spi_device *dev) "Cannot get platform resources\n"); return r; } + } else if (ACPI_HANDLE(&dev->dev)) { + r = st_nci_spi_acpi_request_resources(dev); + if (r) { + nfc_err(&dev->dev, "Cannot get ACPI data\n"); + return r; + } } else { nfc_err(&dev->dev, "st_nci platform resources not available\n"); @@ -374,24 +409,34 @@ static int st_nci_spi_remove(struct spi_device *dev) return 0; } -#ifdef CONFIG_OF +static struct spi_device_id st_nci_spi_id_table[] = { + {ST_NCI_SPI_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table); + +static const struct acpi_device_id st_nci_spi_acpi_match[] = { + {"SMO2101", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match); + static const struct of_device_id of_st_nci_spi_match[] = { { .compatible = "st,st21nfcb-spi", }, {} }; MODULE_DEVICE_TABLE(of, of_st_nci_spi_match); -#endif static struct spi_driver st_nci_spi_driver = { .driver = { .name = ST_NCI_SPI_DRIVER_NAME, .of_match_table = of_match_ptr(of_st_nci_spi_match), + .acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match), }, .probe = st_nci_spi_probe, .id_table = st_nci_spi_id_table, .remove = st_nci_spi_remove, }; - module_spi_driver(st_nci_spi_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/st21nfca/Kconfig b/drivers/nfc/st21nfca/Kconfig index ee459f066ade..cc3bd5658901 100644 --- a/drivers/nfc/st21nfca/Kconfig +++ b/drivers/nfc/st21nfca/Kconfig @@ -1,20 +1,15 @@ config NFC_ST21NFCA - tristate "STMicroelectronics ST21NFCA NFC driver" - depends on NFC_HCI + tristate select CRC_CCITT - default n ---help--- STMicroelectronics ST21NFCA core driver. It implements the chipset HCI logic and hooks into the NFC kernel APIs. Physical layers will register against it. - To compile this driver as a module, choose m here. The module will - be called st21nfca. - Say N if unsure. - config NFC_ST21NFCA_I2C - tristate "NFC ST21NFCA i2c support" - depends on NFC_ST21NFCA && I2C && NFC_SHDLC + tristate "STMicroelectronics ST21NFCA NFC driver (I2C)" + depends on NFC_HCI && I2C && NFC_SHDLC + select NFC_ST21NFCA ---help--- This module adds support for the STMicroelectronics st21nfca i2c interface. Select this if your platform is using the i2c bus. diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c index a98da33e680a..1f44a151d206 100644 --- a/drivers/nfc/st21nfca/i2c.c +++ b/drivers/nfc/st21nfca/i2c.c @@ -21,8 +21,10 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> +#include <linux/acpi.h> #include <linux/miscdevice.h> #include <linux/interrupt.h> #include <linux/delay.h> @@ -60,12 +62,7 @@ #define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c" -static struct i2c_device_id st21nfca_hci_i2c_id_table[] = { - {ST21NFCA_HCI_DRIVER_NAME, 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table); +#define ST21NFCA_GPIO_NAME_EN "clf_enable" struct st21nfca_i2c_phy { struct i2c_client *i2c_dev; @@ -167,7 +164,6 @@ static void st21nfca_hci_i2c_disable(void *phy_id) { struct st21nfca_i2c_phy *phy = phy_id; - pr_info("\n"); gpio_set_value(phy->gpio_ena, 0); phy->powered = 0; @@ -210,7 +206,6 @@ static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb) I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb); - if (phy->hard_fault != 0) return phy->hard_fault; @@ -509,7 +504,41 @@ static struct nfc_phy_ops i2c_phy_ops = { .disable = st21nfca_hci_i2c_disable, }; -#ifdef CONFIG_OF +static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client) +{ + struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); + const struct acpi_device_id *id; + struct gpio_desc *gpiod_ena; + struct device *dev; + + if (!client) + return -EINVAL; + + dev = &client->dev; + + /* Match the struct device against a given list of ACPI IDs */ + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return -ENODEV; + + /* Get EN GPIO from ACPI */ + gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1, + GPIOD_OUT_LOW); + if (!IS_ERR(gpiod_ena)) + phy->gpio_ena = desc_to_gpio(gpiod_ena); + + phy->gpio_ena = desc_to_gpio(gpiod_ena); + + phy->irq_polarity = irq_get_trigger_type(client->irq); + + phy->se_status.is_ese_present = + device_property_present(dev, "ese-present"); + phy->se_status.is_uicc_present = + device_property_present(dev, "uicc-present"); + + return 0; +} + static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) { struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); @@ -530,7 +559,7 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) /* GPIO request and configuration */ r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH, - "clf_enable"); + ST21NFCA_GPIO_NAME_EN); if (r) { nfc_err(&client->dev, "Failed to request enable pin\n"); return r; @@ -547,12 +576,6 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) return 0; } -#else -static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) -{ - return -ENODEV; -} -#endif static int st21nfca_hci_i2c_request_resources(struct i2c_client *client) { @@ -572,7 +595,8 @@ static int st21nfca_hci_i2c_request_resources(struct i2c_client *client) if (phy->gpio_ena > 0) { r = devm_gpio_request_one(&client->dev, phy->gpio_ena, - GPIOF_OUT_INIT_HIGH, "clf_enable"); + GPIOF_OUT_INIT_HIGH, + ST21NFCA_GPIO_NAME_EN); if (r) { pr_err("%s : ena gpio_request failed\n", __FILE__); return r; @@ -628,6 +652,12 @@ static int st21nfca_hci_i2c_probe(struct i2c_client *client, nfc_err(&client->dev, "Cannot get platform resources\n"); return r; } + } else if (ACPI_HANDLE(&client->dev)) { + r = st21nfca_hci_i2c_acpi_request_resources(client); + if (r) { + nfc_err(&client->dev, "Cannot get ACPI data\n"); + return r; + } } else { nfc_err(&client->dev, "st21nfca platform resources not available\n"); return -ENODEV; @@ -670,26 +700,36 @@ static int st21nfca_hci_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_OF +static struct i2c_device_id st21nfca_hci_i2c_id_table[] = { + {ST21NFCA_HCI_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table); + +static const struct acpi_device_id st21nfca_hci_i2c_acpi_match[] = { + {"SMO2100", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st21nfca_hci_i2c_acpi_match); + static const struct of_device_id of_st21nfca_i2c_match[] = { { .compatible = "st,st21nfca-i2c", }, { .compatible = "st,st21nfca_i2c", }, {} }; MODULE_DEVICE_TABLE(of, of_st21nfca_i2c_match); -#endif static struct i2c_driver st21nfca_hci_i2c_driver = { .driver = { .owner = THIS_MODULE, .name = ST21NFCA_HCI_I2C_DRIVER_NAME, .of_match_table = of_match_ptr(of_st21nfca_i2c_match), + .acpi_match_table = ACPI_PTR(st21nfca_hci_i2c_acpi_match), }, .probe = st21nfca_hci_i2c_probe, .id_table = st21nfca_hci_i2c_id_table, .remove = st21nfca_hci_i2c_remove, }; - module_i2c_driver(st21nfca_hci_i2c_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/nfc/st21nfca/se.c b/drivers/nfc/st21nfca/se.c index c79d99b24c96..bd56a16e4007 100644 --- a/drivers/nfc/st21nfca/se.c +++ b/drivers/nfc/st21nfca/se.c @@ -312,7 +312,8 @@ int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, switch (event) { case ST21NFCA_EVT_CONNECTIVITY: - break; + r = nfc_se_connectivity(hdev->ndev, host); + break; case ST21NFCA_EVT_TRANSACTION: /* * According to specification etsi 102 622 @@ -342,7 +343,7 @@ int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, transaction->aid_len + 4, transaction->params_len); r = nfc_se_transaction(hdev->ndev, host, transaction); - break; + break; default: nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n"); return 1; diff --git a/drivers/nfc/st95hf/Kconfig b/drivers/nfc/st95hf/Kconfig new file mode 100644 index 000000000000..224f266fdcb6 --- /dev/null +++ b/drivers/nfc/st95hf/Kconfig @@ -0,0 +1,10 @@ +config NFC_ST95HF + tristate "ST95HF NFC Transceiver driver" + depends on SPI && NFC_DIGITAL + help + This enables the ST NFC driver for ST95HF NFC transceiver. + This makes use of SPI framework to communicate with transceiver + and registered with NFC digital core to support Linux NFC framework. + + Say Y here to compile support for ST NFC transceiver ST95HF + linux driver into the kernel or say M to compile it as module. diff --git a/drivers/nfc/st95hf/Makefile b/drivers/nfc/st95hf/Makefile new file mode 100644 index 000000000000..00760b38ab7e --- /dev/null +++ b/drivers/nfc/st95hf/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for STMicroelectronics NFC transceiver ST95HF +# + +obj-$(CONFIG_NFC_ST95HF) += st95hf.o +st95hf-objs := spi.o core.o diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c new file mode 100644 index 000000000000..c2840e412962 --- /dev/null +++ b/drivers/nfc/st95hf/core.c @@ -0,0 +1,1273 @@ +/* + * -------------------------------------------------------------------- + * Driver for ST NFC Transceiver ST95HF + * -------------------------------------------------------------------- + * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/nfc.h> +#include <linux/of_gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/wait.h> +#include <net/nfc/digital.h> +#include <net/nfc/nfc.h> + +#include "spi.h" + +/* supported protocols */ +#define ST95HF_SUPPORTED_PROT (NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK | \ + NFC_PROTO_ISO15693_MASK) +/* driver capabilities */ +#define ST95HF_CAPABILITIES NFC_DIGITAL_DRV_CAPS_IN_CRC + +/* Command Send Interface */ +/* ST95HF_COMMAND_SEND CMD Ids */ +#define ECHO_CMD 0x55 +#define WRITE_REGISTER_CMD 0x9 +#define PROTOCOL_SELECT_CMD 0x2 +#define SEND_RECEIVE_CMD 0x4 + +/* Select protocol codes */ +#define ISO15693_PROTOCOL_CODE 0x1 +#define ISO14443A_PROTOCOL_CODE 0x2 +#define ISO14443B_PROTOCOL_CODE 0x3 + +/* + * head room len is 3 + * 1 byte for control byte + * 1 byte for cmd + * 1 byte for size + */ +#define ST95HF_HEADROOM_LEN 3 + +/* + * tailroom is 1 for ISO14443A + * and 0 for ISO14443B/ISO15693, + * hence the max value 1 should be + * taken. + */ +#define ST95HF_TAILROOM_LEN 1 + +/* Command Response interface */ +#define MAX_RESPONSE_BUFFER_SIZE 280 +#define ECHORESPONSE 0x55 +#define ST95HF_ERR_MASK 0xF +#define ST95HF_TIMEOUT_ERROR 0x87 +#define ST95HF_NFCA_CRC_ERR_MASK 0x20 +#define ST95HF_NFCB_CRC_ERR_MASK 0x01 + +/* ST95HF transmission flag values */ +#define TRFLAG_NFCA_SHORT_FRAME 0x07 +#define TRFLAG_NFCA_STD_FRAME 0x08 +#define TRFLAG_NFCA_STD_FRAME_CRC 0x28 + +/* Misc defs */ +#define HIGH 1 +#define LOW 0 +#define ISO14443A_RATS_REQ 0xE0 +#define RATS_TB1_PRESENT_MASK 0x20 +#define RATS_TA1_PRESENT_MASK 0x10 +#define TB1_FWI_MASK 0xF0 +#define WTX_REQ_FROM_TAG 0xF2 + +#define MAX_CMD_LEN 0x7 + +#define MAX_CMD_PARAMS 4 +struct cmd { + int cmd_len; + unsigned char cmd_id; + unsigned char no_cmd_params; + unsigned char cmd_params[MAX_CMD_PARAMS]; + enum req_type req; +}; + +struct param_list { + int param_offset; + int new_param_val; +}; + +/* + * List of top-level cmds to be used internally by the driver. + * All these commands are build on top of ST95HF basic commands + * such as SEND_RECEIVE_CMD, PROTOCOL_SELECT_CMD, etc. + * These top level cmds are used internally while implementing various ops of + * digital layer/driver probe or extending the digital framework layer for + * features that are not yet implemented there, for example, WTX cmd handling. + */ +enum st95hf_cmd_list { + CMD_ECHO, + CMD_ISO14443A_CONFIG, + CMD_ISO14443A_DEMOGAIN, + CMD_ISO14443B_DEMOGAIN, + CMD_ISO14443A_PROTOCOL_SELECT, + CMD_ISO14443B_PROTOCOL_SELECT, + CMD_WTX_RESPONSE, + CMD_FIELD_OFF, + CMD_ISO15693_PROTOCOL_SELECT, +}; + +static const struct cmd cmd_array[] = { + [CMD_ECHO] = { + .cmd_len = 0x2, + .cmd_id = ECHO_CMD, + .no_cmd_params = 0, + .req = SYNC, + }, + [CMD_ISO14443A_CONFIG] = { + .cmd_len = 0x7, + .cmd_id = WRITE_REGISTER_CMD, + .no_cmd_params = 0x4, + .cmd_params = {0x3A, 0x00, 0x5A, 0x04}, + .req = SYNC, + }, + [CMD_ISO14443A_DEMOGAIN] = { + .cmd_len = 0x7, + .cmd_id = WRITE_REGISTER_CMD, + .no_cmd_params = 0x4, + .cmd_params = {0x68, 0x01, 0x01, 0xDF}, + .req = SYNC, + }, + [CMD_ISO14443B_DEMOGAIN] = { + .cmd_len = 0x7, + .cmd_id = WRITE_REGISTER_CMD, + .no_cmd_params = 0x4, + .cmd_params = {0x68, 0x01, 0x01, 0x51}, + .req = SYNC, + }, + [CMD_ISO14443A_PROTOCOL_SELECT] = { + .cmd_len = 0x7, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x4, + .cmd_params = {ISO14443A_PROTOCOL_CODE, 0x00, 0x01, 0xA0}, + .req = SYNC, + }, + [CMD_ISO14443B_PROTOCOL_SELECT] = { + .cmd_len = 0x7, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x4, + .cmd_params = {ISO14443B_PROTOCOL_CODE, 0x01, 0x03, 0xFF}, + .req = SYNC, + }, + [CMD_WTX_RESPONSE] = { + .cmd_len = 0x6, + .cmd_id = SEND_RECEIVE_CMD, + .no_cmd_params = 0x3, + .cmd_params = {0xF2, 0x00, TRFLAG_NFCA_STD_FRAME_CRC}, + .req = ASYNC, + }, + [CMD_FIELD_OFF] = { + .cmd_len = 0x5, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x2, + .cmd_params = {0x0, 0x0}, + .req = SYNC, + }, + [CMD_ISO15693_PROTOCOL_SELECT] = { + .cmd_len = 0x5, + .cmd_id = PROTOCOL_SELECT_CMD, + .no_cmd_params = 0x2, + .cmd_params = {ISO15693_PROTOCOL_CODE, 0x0D}, + .req = SYNC, + }, +}; + +/* st95_digital_cmd_complete_arg stores client context */ +struct st95_digital_cmd_complete_arg { + struct sk_buff *skb_resp; + nfc_digital_cmd_complete_t complete_cb; + void *cb_usrarg; + bool rats; +}; + +/* + * structure containing ST95HF driver specific data. + * @spicontext: structure containing information required + * for spi communication between st95hf and host. + * @ddev: nfc digital device object. + * @nfcdev: nfc device object. + * @enable_gpio: gpio used to enable st95hf transceiver. + * @complete_cb_arg: structure to store various context information + * that is passed from nfc requesting thread to the threaded ISR. + * @st95hf_supply: regulator "consumer" for NFC device. + * @sendrcv_trflag: last byte of frame send by sendrecv command + * of st95hf. This byte contains transmission flag info. + * @exchange_lock: semaphore used for signaling the st95hf_remove + * function that the last outstanding async nfc request is finished. + * @rm_lock: mutex for ensuring safe access of nfc digital object + * from threaded ISR. Usage of this mutex avoids any race between + * deletion of the object from st95hf_remove() and its access from + * the threaded ISR. + * @nfcdev_free: flag to have the state of nfc device object. + * [alive | died] + * @current_protocol: current nfc protocol. + * @current_rf_tech: current rf technology. + * @fwi: frame waiting index, received in reply of RATS according to + * digital protocol. + */ +struct st95hf_context { + struct st95hf_spi_context spicontext; + struct nfc_digital_dev *ddev; + struct nfc_dev *nfcdev; + unsigned int enable_gpio; + struct st95_digital_cmd_complete_arg complete_cb_arg; + struct regulator *st95hf_supply; + unsigned char sendrcv_trflag; + struct semaphore exchange_lock; + struct mutex rm_lock; + bool nfcdev_free; + u8 current_protocol; + u8 current_rf_tech; + int fwi; +}; + +/* + * st95hf_send_recv_cmd() is for sending commands to ST95HF + * that are described in the cmd_array[]. It can optionally + * receive the response if the cmd request is of type + * SYNC. For that to happen caller must pass true to recv_res. + * For ASYNC request, recv_res is ignored and the + * function will never try to receive the response on behalf + * of the caller. + */ +static int st95hf_send_recv_cmd(struct st95hf_context *st95context, + enum st95hf_cmd_list cmd, + int no_modif, + struct param_list *list_array, + bool recv_res) +{ + unsigned char spi_cmd_buffer[MAX_CMD_LEN]; + int i, ret; + struct device *dev = &st95context->spicontext.spidev->dev; + + if (cmd_array[cmd].cmd_len > MAX_CMD_LEN) + return -EINVAL; + if (cmd_array[cmd].no_cmd_params < no_modif) + return -EINVAL; + if (no_modif && !list_array) + return -EINVAL; + + spi_cmd_buffer[0] = ST95HF_COMMAND_SEND; + spi_cmd_buffer[1] = cmd_array[cmd].cmd_id; + spi_cmd_buffer[2] = cmd_array[cmd].no_cmd_params; + + memcpy(&spi_cmd_buffer[3], cmd_array[cmd].cmd_params, + spi_cmd_buffer[2]); + + for (i = 0; i < no_modif; i++) { + if (list_array[i].param_offset >= cmd_array[cmd].no_cmd_params) + return -EINVAL; + spi_cmd_buffer[3 + list_array[i].param_offset] = + list_array[i].new_param_val; + } + + ret = st95hf_spi_send(&st95context->spicontext, + spi_cmd_buffer, + cmd_array[cmd].cmd_len, + cmd_array[cmd].req); + if (ret) { + dev_err(dev, "st95hf_spi_send failed with error %d\n", ret); + return ret; + } + + if (cmd_array[cmd].req == SYNC && recv_res) { + unsigned char st95hf_response_arr[2]; + + ret = st95hf_spi_recv_response(&st95context->spicontext, + st95hf_response_arr); + if (ret < 0) { + dev_err(dev, "spi error from st95hf_spi_recv_response(), err = 0x%x\n", + ret); + return ret; + } + + if (st95hf_response_arr[0]) { + dev_err(dev, "st95hf error from st95hf_spi_recv_response(), err = 0x%x\n", + st95hf_response_arr[0]); + return -EIO; + } + } + + return 0; +} + +static int st95hf_echo_command(struct st95hf_context *st95context) +{ + int result = 0; + unsigned char echo_response; + + result = st95hf_send_recv_cmd(st95context, CMD_ECHO, 0, NULL, false); + if (result) + return result; + + /* If control reached here, response can be taken */ + result = st95hf_spi_recv_echo_res(&st95context->spicontext, + &echo_response); + if (result) { + dev_err(&st95context->spicontext.spidev->dev, + "err: echo response receieve error = 0x%x\n", result); + return result; + } + + if (echo_response == ECHORESPONSE) + return 0; + + dev_err(&st95context->spicontext.spidev->dev, "err: echo res is 0x%x\n", + echo_response); + + return -EIO; +} + +static int secondary_configuration_type4a(struct st95hf_context *stcontext) +{ + int result = 0; + struct device *dev = &stcontext->nfcdev->dev; + + /* 14443A config setting after select protocol */ + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443A_CONFIG, + 0, + NULL, + true); + if (result) { + dev_err(dev, "type a config cmd, err = 0x%x\n", result); + return result; + } + + /* 14443A demo gain setting */ + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443A_DEMOGAIN, + 0, + NULL, + true); + if (result) + dev_err(dev, "type a demogain cmd, err = 0x%x\n", result); + + return result; +} + +static int secondary_configuration_type4b(struct st95hf_context *stcontext) +{ + int result = 0; + struct device *dev = &stcontext->nfcdev->dev; + + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443B_DEMOGAIN, + 0, + NULL, + true); + if (result) + dev_err(dev, "type b demogain cmd, err = 0x%x\n", result); + + return result; +} + +static int st95hf_select_protocol(struct st95hf_context *stcontext, int type) +{ + int result = 0; + struct device *dev; + + dev = &stcontext->nfcdev->dev; + + switch (type) { + case NFC_DIGITAL_RF_TECH_106A: + stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106A; + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443A_PROTOCOL_SELECT, + 0, + NULL, + true); + if (result) { + dev_err(dev, "protocol sel, err = 0x%x\n", + result); + return result; + } + + /* secondary config. for 14443Type 4A after protocol select */ + result = secondary_configuration_type4a(stcontext); + if (result) { + dev_err(dev, "type a secondary config, err = 0x%x\n", + result); + return result; + } + break; + case NFC_DIGITAL_RF_TECH_106B: + stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106B; + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO14443B_PROTOCOL_SELECT, + 0, + NULL, + true); + if (result) { + dev_err(dev, "protocol sel send, err = 0x%x\n", + result); + return result; + } + + /* + * delay of 5-6 ms is required after select protocol + * command in case of ISO14443 Type B + */ + usleep_range(50000, 60000); + + /* secondary config. for 14443Type 4B after protocol select */ + result = secondary_configuration_type4b(stcontext); + if (result) { + dev_err(dev, "type b secondary config, err = 0x%x\n", + result); + return result; + } + break; + case NFC_DIGITAL_RF_TECH_ISO15693: + stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_ISO15693; + result = st95hf_send_recv_cmd(stcontext, + CMD_ISO15693_PROTOCOL_SELECT, + 0, + NULL, + true); + if (result) { + dev_err(dev, "protocol sel send, err = 0x%x\n", + result); + return result; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static void st95hf_send_st95enable_negativepulse(struct st95hf_context *st95con) +{ + /* First make irq_in pin high */ + gpio_set_value(st95con->enable_gpio, HIGH); + + /* wait for 1 milisecond */ + usleep_range(1000, 2000); + + /* Make irq_in pin low */ + gpio_set_value(st95con->enable_gpio, LOW); + + /* wait for minimum interrupt pulse to make st95 active */ + usleep_range(1000, 2000); + + /* At end make it high */ + gpio_set_value(st95con->enable_gpio, HIGH); +} + +/* + * Send a reset sequence over SPI bus (Reset command + wait 3ms + + * negative pulse on st95hf enable gpio + */ +static int st95hf_send_spi_reset_sequence(struct st95hf_context *st95context) +{ + int result = 0; + unsigned char reset_cmd = ST95HF_COMMAND_RESET; + + result = st95hf_spi_send(&st95context->spicontext, + &reset_cmd, + ST95HF_RESET_CMD_LEN, + ASYNC); + if (result) { + dev_err(&st95context->spicontext.spidev->dev, + "spi reset sequence cmd error = %d", result); + return result; + } + + /* wait for 3 milisecond to complete the controller reset process */ + usleep_range(3000, 4000); + + /* send negative pulse to make st95hf active */ + st95hf_send_st95enable_negativepulse(st95context); + + /* wait for 10 milisecond : HFO setup time */ + usleep_range(10000, 20000); + + return result; +} + +static int st95hf_por_sequence(struct st95hf_context *st95context) +{ + int nth_attempt = 1; + int result; + + st95hf_send_st95enable_negativepulse(st95context); + + usleep_range(5000, 6000); + do { + /* send an ECHO command and checks ST95HF response */ + result = st95hf_echo_command(st95context); + + dev_dbg(&st95context->spicontext.spidev->dev, + "response from echo function = 0x%x, attempt = %d\n", + result, nth_attempt); + + if (!result) + return 0; + + /* send an pulse on IRQ in case of the chip is on sleep state */ + if (nth_attempt == 2) + st95hf_send_st95enable_negativepulse(st95context); + else + st95hf_send_spi_reset_sequence(st95context); + + /* delay of 50 milisecond */ + usleep_range(50000, 51000); + } while (nth_attempt++ < 3); + + return -ETIMEDOUT; +} + +static int iso14443_config_fdt(struct st95hf_context *st95context, int wtxm) +{ + int result = 0; + struct device *dev = &st95context->spicontext.spidev->dev; + struct nfc_digital_dev *nfcddev = st95context->ddev; + unsigned char pp_typeb; + struct param_list new_params[2]; + + pp_typeb = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[2]; + + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 && + st95context->fwi < 4) + st95context->fwi = 4; + + new_params[0].param_offset = 2; + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443) + new_params[0].new_param_val = st95context->fwi; + else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B) + new_params[0].new_param_val = pp_typeb; + + new_params[1].param_offset = 3; + new_params[1].new_param_val = wtxm; + + switch (nfcddev->curr_protocol) { + case NFC_PROTO_ISO14443: + result = st95hf_send_recv_cmd(st95context, + CMD_ISO14443A_PROTOCOL_SELECT, + 2, + new_params, + true); + if (result) { + dev_err(dev, "WTX type a sel proto, err = 0x%x\n", + result); + return result; + } + + /* secondary config. for 14443Type 4A after protocol select */ + result = secondary_configuration_type4a(st95context); + if (result) { + dev_err(dev, "WTX type a second. config, err = 0x%x\n", + result); + return result; + } + break; + case NFC_PROTO_ISO14443_B: + result = st95hf_send_recv_cmd(st95context, + CMD_ISO14443B_PROTOCOL_SELECT, + 2, + new_params, + true); + if (result) { + dev_err(dev, "WTX type b sel proto, err = 0x%x\n", + result); + return result; + } + + /* secondary config. for 14443Type 4B after protocol select */ + result = secondary_configuration_type4b(st95context); + if (result) { + dev_err(dev, "WTX type b second. config, err = 0x%x\n", + result); + return result; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int st95hf_handle_wtx(struct st95hf_context *stcontext, + bool new_wtx, + int wtx_val) +{ + int result = 0; + unsigned char val_mm = 0; + struct param_list new_params[1]; + struct nfc_digital_dev *nfcddev = stcontext->ddev; + struct device *dev = &stcontext->nfcdev->dev; + + if (new_wtx) { + result = iso14443_config_fdt(stcontext, wtx_val & 0x3f); + if (result) { + dev_err(dev, "Config. setting error on WTX req, err = 0x%x\n", + result); + return result; + } + + /* Send response of wtx with ASYNC as no response expected */ + new_params[0].param_offset = 1; + new_params[0].new_param_val = wtx_val; + + result = st95hf_send_recv_cmd(stcontext, + CMD_WTX_RESPONSE, + 1, + new_params, + false); + if (result) + dev_err(dev, "WTX response send, err = 0x%x\n", result); + return result; + } + + /* if no new wtx, cofigure with default values */ + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443) + val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3]; + else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B) + val_mm = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[3]; + + result = iso14443_config_fdt(stcontext, val_mm); + if (result) + dev_err(dev, "Default config. setting error after WTX processing, err = 0x%x\n", + result); + + return result; +} + +static int st95hf_error_handling(struct st95hf_context *stcontext, + struct sk_buff *skb_resp, + int res_len) +{ + int result = 0; + unsigned char error_byte; + struct device *dev = &stcontext->nfcdev->dev; + + /* First check ST95HF specific error */ + if (skb_resp->data[0] & ST95HF_ERR_MASK) { + if (skb_resp->data[0] == ST95HF_TIMEOUT_ERROR) + result = -ETIMEDOUT; + else + result = -EIO; + return result; + } + + /* Check for CRC err only if CRC is present in the tag response */ + switch (stcontext->current_rf_tech) { + case NFC_DIGITAL_RF_TECH_106A: + if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC) { + error_byte = skb_resp->data[res_len - 3]; + if (error_byte & ST95HF_NFCA_CRC_ERR_MASK) { + /* CRC error occurred */ + dev_err(dev, "CRC error, byte received = 0x%x\n", + error_byte); + result = -EIO; + } + } + break; + case NFC_DIGITAL_RF_TECH_106B: + case NFC_DIGITAL_RF_TECH_ISO15693: + error_byte = skb_resp->data[res_len - 1]; + if (error_byte & ST95HF_NFCB_CRC_ERR_MASK) { + /* CRC error occurred */ + dev_err(dev, "CRC error, byte received = 0x%x\n", + error_byte); + result = -EIO; + } + break; + } + + return result; +} + +static int st95hf_response_handler(struct st95hf_context *stcontext, + struct sk_buff *skb_resp, + int res_len) +{ + int result = 0; + int skb_len; + unsigned char val_mm; + struct nfc_digital_dev *nfcddev = stcontext->ddev; + struct device *dev = &stcontext->nfcdev->dev; + struct st95_digital_cmd_complete_arg *cb_arg; + + cb_arg = &stcontext->complete_cb_arg; + + /* Process the response */ + skb_put(skb_resp, res_len); + + /* Remove st95 header */ + skb_pull(skb_resp, 2); + + skb_len = skb_resp->len; + + /* check if it is case of RATS request reply & FWI is present */ + if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 && cb_arg->rats && + (skb_resp->data[1] & RATS_TB1_PRESENT_MASK)) { + if (skb_resp->data[1] & RATS_TA1_PRESENT_MASK) + stcontext->fwi = + (skb_resp->data[3] & TB1_FWI_MASK) >> 4; + else + stcontext->fwi = + (skb_resp->data[2] & TB1_FWI_MASK) >> 4; + + val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3]; + + result = iso14443_config_fdt(stcontext, val_mm); + if (result) { + dev_err(dev, "error in config_fdt to handle fwi of ATS, error=%d\n", + result); + return result; + } + } + cb_arg->rats = false; + + /* Remove CRC bytes only if received frames data has an eod (CRC) */ + switch (stcontext->current_rf_tech) { + case NFC_DIGITAL_RF_TECH_106A: + if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC) + skb_trim(skb_resp, (skb_len - 5)); + else + skb_trim(skb_resp, (skb_len - 3)); + break; + case NFC_DIGITAL_RF_TECH_106B: + case NFC_DIGITAL_RF_TECH_ISO15693: + skb_trim(skb_resp, (skb_len - 3)); + break; + } + + return result; +} + +static irqreturn_t st95hf_irq_handler(int irq, void *st95hfcontext) +{ + struct st95hf_context *stcontext = + (struct st95hf_context *)st95hfcontext; + + if (stcontext->spicontext.req_issync) { + complete(&stcontext->spicontext.done); + stcontext->spicontext.req_issync = false; + return IRQ_HANDLED; + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t st95hf_irq_thread_handler(int irq, void *st95hfcontext) +{ + int result = 0; + int res_len; + static bool wtx; + struct device *dev; + struct device *spidevice; + struct nfc_digital_dev *nfcddev; + struct sk_buff *skb_resp; + struct st95hf_context *stcontext = + (struct st95hf_context *)st95hfcontext; + struct st95_digital_cmd_complete_arg *cb_arg; + + spidevice = &stcontext->spicontext.spidev->dev; + + /* + * check semaphore, if not down() already, then we don't + * know in which context the ISR is called and surely it + * will be a bug. Note that down() of the semaphore is done + * in the corresponding st95hf_in_send_cmd() and then + * only this ISR should be called. ISR will up() the + * semaphore before leaving. Hence when the ISR is called + * the correct behaviour is down_trylock() should always + * return 1 (indicating semaphore cant be taken and hence no + * change in semaphore count). + * If not, then we up() the semaphore and crash on + * a BUG() ! + */ + if (!down_trylock(&stcontext->exchange_lock)) { + up(&stcontext->exchange_lock); + WARN(1, "unknown context in ST95HF ISR"); + return IRQ_NONE; + } + + cb_arg = &stcontext->complete_cb_arg; + skb_resp = cb_arg->skb_resp; + + mutex_lock(&stcontext->rm_lock); + res_len = st95hf_spi_recv_response(&stcontext->spicontext, + skb_resp->data); + if (res_len < 0) { + dev_err(spidevice, "TISR spi response err = 0x%x\n", res_len); + result = res_len; + goto end; + } + + /* if stcontext->nfcdev_free is true, it means remove already ran */ + if (stcontext->nfcdev_free) { + result = -ENODEV; + goto end; + } + + dev = &stcontext->nfcdev->dev; + nfcddev = stcontext->ddev; + if (skb_resp->data[2] == WTX_REQ_FROM_TAG) { + /* Request for new FWT from tag */ + result = st95hf_handle_wtx(stcontext, true, skb_resp->data[3]); + if (result) + goto end; + + wtx = true; + mutex_unlock(&stcontext->rm_lock); + return IRQ_HANDLED; + } + + result = st95hf_error_handling(stcontext, skb_resp, res_len); + if (result) + goto end; + + result = st95hf_response_handler(stcontext, skb_resp, res_len); + if (result) + goto end; + + /* + * If select protocol is done on wtx req. do select protocol + * again with default values + */ + if (wtx) { + wtx = false; + result = st95hf_handle_wtx(stcontext, false, 0); + if (result) + goto end; + } + + /* call digital layer callback */ + cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp); + + /* up the semaphore before returning */ + up(&stcontext->exchange_lock); + mutex_unlock(&stcontext->rm_lock); + + return IRQ_HANDLED; + +end: + kfree_skb(skb_resp); + wtx = false; + cb_arg->rats = false; + skb_resp = ERR_PTR(result); + /* call of callback with error */ + cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp); + /* up the semaphore before returning */ + up(&stcontext->exchange_lock); + mutex_unlock(&stcontext->rm_lock); + return IRQ_HANDLED; +} + +/* NFC ops functions definition */ +static int st95hf_in_configure_hw(struct nfc_digital_dev *ddev, + int type, + int param) +{ + struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev); + + if (type == NFC_DIGITAL_CONFIG_RF_TECH) + return st95hf_select_protocol(stcontext, param); + + if (type == NFC_DIGITAL_CONFIG_FRAMING) { + switch (param) { + case NFC_DIGITAL_FRAMING_NFCA_SHORT: + stcontext->sendrcv_trflag = TRFLAG_NFCA_SHORT_FRAME; + break; + case NFC_DIGITAL_FRAMING_NFCA_STANDARD: + stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME; + break; + case NFC_DIGITAL_FRAMING_NFCA_T4T: + case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP: + case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A: + stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME_CRC; + break; + case NFC_DIGITAL_FRAMING_NFCB: + case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY: + case NFC_DIGITAL_FRAMING_ISO15693_T5T: + break; + } + } + + return 0; +} + +static int rf_off(struct st95hf_context *stcontext) +{ + int rc; + struct device *dev; + + dev = &stcontext->nfcdev->dev; + + rc = st95hf_send_recv_cmd(stcontext, CMD_FIELD_OFF, 0, NULL, true); + if (rc) + dev_err(dev, "protocol sel send field off, err = 0x%x\n", rc); + + return rc; +} + +static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, + u16 timeout, + nfc_digital_cmd_complete_t cb, + void *arg) +{ + struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev); + int rc; + struct sk_buff *skb_resp; + int len_data_to_tag = 0; + + skb_resp = nfc_alloc_recv_skb(MAX_RESPONSE_BUFFER_SIZE, GFP_KERNEL); + if (!skb_resp) { + rc = -ENOMEM; + goto error; + } + + switch (stcontext->current_rf_tech) { + case NFC_DIGITAL_RF_TECH_106A: + len_data_to_tag = skb->len + 1; + *skb_put(skb, 1) = stcontext->sendrcv_trflag; + break; + case NFC_DIGITAL_RF_TECH_106B: + case NFC_DIGITAL_RF_TECH_ISO15693: + len_data_to_tag = skb->len; + break; + default: + rc = -EINVAL; + goto free_skb_resp; + } + + skb_push(skb, 3); + skb->data[0] = ST95HF_COMMAND_SEND; + skb->data[1] = SEND_RECEIVE_CMD; + skb->data[2] = len_data_to_tag; + + stcontext->complete_cb_arg.skb_resp = skb_resp; + stcontext->complete_cb_arg.cb_usrarg = arg; + stcontext->complete_cb_arg.complete_cb = cb; + + if ((skb->data[3] == ISO14443A_RATS_REQ) && + ddev->curr_protocol == NFC_PROTO_ISO14443) + stcontext->complete_cb_arg.rats = true; + + /* + * down the semaphore to indicate to remove func that an + * ISR is pending, note that it will not block here in any case. + * If found blocked, it is a BUG! + */ + rc = down_killable(&stcontext->exchange_lock); + if (rc) { + WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n"); + return rc; + } + + rc = st95hf_spi_send(&stcontext->spicontext, skb->data, + skb->len, + ASYNC); + if (rc) { + dev_err(&stcontext->nfcdev->dev, + "Error %d trying to perform data_exchange", rc); + /* up the semaphore since ISR will never come in this case */ + up(&stcontext->exchange_lock); + goto free_skb_resp; + } + + kfree_skb(skb); + + return rc; + +free_skb_resp: + kfree_skb(skb_resp); +error: + return rc; +} + +/* p2p will be supported in a later release ! */ +static int st95hf_tg_configure_hw(struct nfc_digital_dev *ddev, + int type, + int param) +{ + return 0; +} + +static int st95hf_tg_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, + u16 timeout, + nfc_digital_cmd_complete_t cb, + void *arg) +{ + return 0; +} + +static int st95hf_tg_listen(struct nfc_digital_dev *ddev, + u16 timeout, + nfc_digital_cmd_complete_t cb, + void *arg) +{ + return 0; +} + +static int st95hf_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech) +{ + return 0; +} + +static int st95hf_switch_rf(struct nfc_digital_dev *ddev, bool on) +{ + u8 rf_tech; + struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev); + + rf_tech = ddev->curr_rf_tech; + + if (on) + /* switch on RF field */ + return st95hf_select_protocol(stcontext, rf_tech); + + /* switch OFF RF field */ + return rf_off(stcontext); +} + +/* TODO st95hf_abort_cmd */ +static void st95hf_abort_cmd(struct nfc_digital_dev *ddev) +{ +} + +static struct nfc_digital_ops st95hf_nfc_digital_ops = { + .in_configure_hw = st95hf_in_configure_hw, + .in_send_cmd = st95hf_in_send_cmd, + + .tg_listen = st95hf_tg_listen, + .tg_configure_hw = st95hf_tg_configure_hw, + .tg_send_cmd = st95hf_tg_send_cmd, + .tg_get_rf_tech = st95hf_tg_get_rf_tech, + + .switch_rf = st95hf_switch_rf, + .abort_cmd = st95hf_abort_cmd, +}; + +static const struct spi_device_id st95hf_id[] = { + { "st95hf", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, st95hf_id); + +static int st95hf_probe(struct spi_device *nfc_spi_dev) +{ + int ret; + + struct st95hf_context *st95context; + struct st95hf_spi_context *spicontext; + + nfc_info(&nfc_spi_dev->dev, "ST95HF driver probe called.\n"); + + st95context = devm_kzalloc(&nfc_spi_dev->dev, + sizeof(struct st95hf_context), + GFP_KERNEL); + if (!st95context) + return -ENOMEM; + + spicontext = &st95context->spicontext; + + spicontext->spidev = nfc_spi_dev; + + st95context->fwi = + cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[2]; + + if (device_property_present(&nfc_spi_dev->dev, "st95hfvin")) { + st95context->st95hf_supply = + devm_regulator_get(&nfc_spi_dev->dev, + "st95hfvin"); + if (IS_ERR(st95context->st95hf_supply)) { + dev_err(&nfc_spi_dev->dev, "failed to acquire regulator\n"); + return PTR_ERR(st95context->st95hf_supply); + } + + ret = regulator_enable(st95context->st95hf_supply); + if (ret) { + dev_err(&nfc_spi_dev->dev, "failed to enable regulator\n"); + return ret; + } + } + + init_completion(&spicontext->done); + mutex_init(&spicontext->spi_lock); + + /* + * Store spicontext in spi device object for using it in + * remove function + */ + dev_set_drvdata(&nfc_spi_dev->dev, spicontext); + + st95context->enable_gpio = + of_get_named_gpio(nfc_spi_dev->dev.of_node, + "enable-gpio", + 0); + if (!gpio_is_valid(st95context->enable_gpio)) { + dev_err(&nfc_spi_dev->dev, "No valid enable gpio\n"); + ret = st95context->enable_gpio; + goto err_disable_regulator; + } + + ret = devm_gpio_request_one(&nfc_spi_dev->dev, st95context->enable_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + "enable_gpio"); + if (ret) + goto err_disable_regulator; + + if (nfc_spi_dev->irq > 0) { + if (devm_request_threaded_irq(&nfc_spi_dev->dev, + nfc_spi_dev->irq, + st95hf_irq_handler, + st95hf_irq_thread_handler, + IRQF_TRIGGER_FALLING, + "st95hf", + (void *)st95context) < 0) { + dev_err(&nfc_spi_dev->dev, "err: irq request for st95hf is failed\n"); + ret = -EINVAL; + goto err_disable_regulator; + } + } else { + dev_err(&nfc_spi_dev->dev, "not a valid IRQ associated with ST95HF\n"); + ret = -EINVAL; + goto err_disable_regulator; + } + + /* + * First reset SPI to handle warm reset of the system. + * It will put the ST95HF device in Power ON state + * which make the state of device identical to state + * at the time of cold reset of the system. + */ + ret = st95hf_send_spi_reset_sequence(st95context); + if (ret) { + dev_err(&nfc_spi_dev->dev, "err: spi_reset_sequence failed\n"); + goto err_disable_regulator; + } + + /* call PowerOnReset sequence of ST95hf to activate it */ + ret = st95hf_por_sequence(st95context); + if (ret) { + dev_err(&nfc_spi_dev->dev, "err: por seq failed for st95hf\n"); + goto err_disable_regulator; + } + + /* create NFC dev object and register with NFC Subsystem */ + st95context->ddev = nfc_digital_allocate_device(&st95hf_nfc_digital_ops, + ST95HF_SUPPORTED_PROT, + ST95HF_CAPABILITIES, + ST95HF_HEADROOM_LEN, + ST95HF_TAILROOM_LEN); + if (!st95context->ddev) { + ret = -ENOMEM; + goto err_disable_regulator; + } + + st95context->nfcdev = st95context->ddev->nfc_dev; + nfc_digital_set_parent_dev(st95context->ddev, &nfc_spi_dev->dev); + + ret = nfc_digital_register_device(st95context->ddev); + if (ret) { + dev_err(&st95context->nfcdev->dev, "st95hf registration failed\n"); + goto err_free_digital_device; + } + + /* store st95context in nfc device object */ + nfc_digital_set_drvdata(st95context->ddev, st95context); + + sema_init(&st95context->exchange_lock, 1); + mutex_init(&st95context->rm_lock); + + return ret; + +err_free_digital_device: + nfc_digital_free_device(st95context->ddev); +err_disable_regulator: + if (st95context->st95hf_supply) + regulator_disable(st95context->st95hf_supply); + + return ret; +} + +static int st95hf_remove(struct spi_device *nfc_spi_dev) +{ + int result = 0; + unsigned char reset_cmd = ST95HF_COMMAND_RESET; + struct st95hf_spi_context *spictx = dev_get_drvdata(&nfc_spi_dev->dev); + + struct st95hf_context *stcontext = container_of(spictx, + struct st95hf_context, + spicontext); + + mutex_lock(&stcontext->rm_lock); + + nfc_digital_unregister_device(stcontext->ddev); + nfc_digital_free_device(stcontext->ddev); + stcontext->nfcdev_free = true; + + mutex_unlock(&stcontext->rm_lock); + + /* if last in_send_cmd's ISR is pending, wait for it to finish */ + result = down_killable(&stcontext->exchange_lock); + if (result == -EINTR) + dev_err(&spictx->spidev->dev, "sleep for semaphore interrupted by signal\n"); + + /* next reset the ST95HF controller */ + result = st95hf_spi_send(&stcontext->spicontext, + &reset_cmd, + ST95HF_RESET_CMD_LEN, + ASYNC); + if (result) { + dev_err(&spictx->spidev->dev, + "ST95HF reset failed in remove() err = %d\n", result); + return result; + } + + /* wait for 3 ms to complete the controller reset process */ + usleep_range(3000, 4000); + + /* disable regulator */ + if (stcontext->st95hf_supply) + regulator_disable(stcontext->st95hf_supply); + + return result; +} + +/* Register as SPI protocol driver */ +static struct spi_driver st95hf_driver = { + .driver = { + .name = "st95hf", + .owner = THIS_MODULE, + }, + .id_table = st95hf_id, + .probe = st95hf_probe, + .remove = st95hf_remove, +}; + +module_spi_driver(st95hf_driver); + +MODULE_AUTHOR("Shikha Singh <shikha.singh@st.com>"); +MODULE_DESCRIPTION("ST NFC Transceiver ST95HF driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nfc/st95hf/spi.c b/drivers/nfc/st95hf/spi.c new file mode 100644 index 000000000000..e2d3bbcc8c34 --- /dev/null +++ b/drivers/nfc/st95hf/spi.c @@ -0,0 +1,167 @@ +/* + * ---------------------------------------------------------------------------- + * drivers/nfc/st95hf/spi.c function definitions for SPI communication + * ---------------------------------------------------------------------------- + * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "spi.h" + +/* Function to send user provided buffer to ST95HF through SPI */ +int st95hf_spi_send(struct st95hf_spi_context *spicontext, + unsigned char *buffertx, + int datalen, + enum req_type reqtype) +{ + struct spi_message m; + int result = 0; + struct spi_device *spidev = spicontext->spidev; + struct spi_transfer tx_transfer = { + .tx_buf = buffertx, + .len = datalen, + }; + + mutex_lock(&spicontext->spi_lock); + + if (reqtype == SYNC) { + spicontext->req_issync = true; + reinit_completion(&spicontext->done); + } else { + spicontext->req_issync = false; + } + + spi_message_init(&m); + spi_message_add_tail(&tx_transfer, &m); + + result = spi_sync(spidev, &m); + if (result) { + dev_err(&spidev->dev, "error: sending cmd to st95hf using SPI = %d\n", + result); + mutex_unlock(&spicontext->spi_lock); + return result; + } + + /* return for asynchronous or no-wait case */ + if (reqtype == ASYNC) { + mutex_unlock(&spicontext->spi_lock); + return 0; + } + + result = wait_for_completion_timeout(&spicontext->done, + msecs_to_jiffies(1000)); + /* check for timeout or success */ + if (!result) { + dev_err(&spidev->dev, "error: response not ready timeout\n"); + result = -ETIMEDOUT; + } else { + result = 0; + } + + mutex_unlock(&spicontext->spi_lock); + + return result; +} +EXPORT_SYMBOL_GPL(st95hf_spi_send); + +/* Function to Receive command Response */ +int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff) +{ + int len = 0; + struct spi_transfer tx_takedata; + struct spi_message m; + struct spi_device *spidev = spicontext->spidev; + unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE; + struct spi_transfer t[2] = { + {.tx_buf = &readdata_cmd, .len = 1,}, + {.rx_buf = receivebuff, .len = 2, .cs_change = 1,}, + }; + + int ret = 0; + + memset(&tx_takedata, 0x0, sizeof(struct spi_transfer)); + + mutex_lock(&spicontext->spi_lock); + + /* First spi transfer to know the length of valid data */ + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + ret = spi_sync(spidev, &m); + if (ret) { + dev_err(&spidev->dev, "spi_recv_resp, data length error = %d\n", + ret); + mutex_unlock(&spicontext->spi_lock); + return ret; + } + + /* As 2 bytes are already read */ + len = 2; + + /* Support of long frame */ + if (receivebuff[0] & 0x60) + len += (((receivebuff[0] & 0x60) >> 5) << 8) | receivebuff[1]; + else + len += receivebuff[1]; + + /* Now make a transfer to read only relevant bytes */ + tx_takedata.rx_buf = &receivebuff[2]; + tx_takedata.len = len - 2; + + spi_message_init(&m); + spi_message_add_tail(&tx_takedata, &m); + + ret = spi_sync(spidev, &m); + + mutex_unlock(&spicontext->spi_lock); + if (ret) { + dev_err(&spidev->dev, "spi_recv_resp, data read error = %d\n", + ret); + return ret; + } + + return len; +} +EXPORT_SYMBOL_GPL(st95hf_spi_recv_response); + +int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff) +{ + unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE; + struct spi_transfer t[2] = { + {.tx_buf = &readdata_cmd, .len = 1,}, + {.rx_buf = receivebuff, .len = 1,}, + }; + struct spi_message m; + struct spi_device *spidev = spicontext->spidev; + int ret = 0; + + mutex_lock(&spicontext->spi_lock); + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + ret = spi_sync(spidev, &m); + + mutex_unlock(&spicontext->spi_lock); + + if (ret) + dev_err(&spidev->dev, "recv_echo_res, data read error = %d\n", + ret); + + return ret; +} +EXPORT_SYMBOL_GPL(st95hf_spi_recv_echo_res); diff --git a/drivers/nfc/st95hf/spi.h b/drivers/nfc/st95hf/spi.h new file mode 100644 index 000000000000..552d220747cd --- /dev/null +++ b/drivers/nfc/st95hf/spi.h @@ -0,0 +1,64 @@ +/* + * --------------------------------------------------------------------------- + * drivers/nfc/st95hf/spi.h functions declarations for SPI communication + * --------------------------------------------------------------------------- + * Copyright (C) 2015 STMicroelectronics – All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LINUX_ST95HF_SPI_H +#define __LINUX_ST95HF_SPI_H + +#include <linux/spi/spi.h> + +/* Basic ST95HF SPI CMDs */ +#define ST95HF_COMMAND_SEND 0x0 +#define ST95HF_COMMAND_RESET 0x1 +#define ST95HF_COMMAND_RECEIVE 0x2 + +#define ST95HF_RESET_CMD_LEN 0x1 + +/* + * structure to contain st95hf spi communication specific information. + * @req_issync: true for synchronous calls. + * @spidev: st95hf spi device object. + * @done: completion structure to wait for st95hf response + * for synchronous calls. + * @spi_lock: mutex to allow only one spi transfer at a time. + */ +struct st95hf_spi_context { + bool req_issync; + struct spi_device *spidev; + struct completion done; + struct mutex spi_lock; +}; + +/* flag to differentiate synchronous & asynchronous spi request */ +enum req_type { + SYNC, + ASYNC, +}; + +int st95hf_spi_send(struct st95hf_spi_context *spicontext, + unsigned char *buffertx, + int datalen, + enum req_type reqtype); + +int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff); + +int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext, + unsigned char *receivebuff); + +#endif diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index f857feb2b573..10842b7051b3 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -2139,7 +2139,7 @@ static int trf7970a_remove(struct spi_device *spi) #ifdef CONFIG_PM_SLEEP static int trf7970a_suspend(struct device *dev) { - struct spi_device *spi = container_of(dev, struct spi_device, dev); + struct spi_device *spi = to_spi_device(dev); struct trf7970a *trf = spi_get_drvdata(spi); dev_dbg(dev, "Suspend\n"); @@ -2155,7 +2155,7 @@ static int trf7970a_suspend(struct device *dev) static int trf7970a_resume(struct device *dev) { - struct spi_device *spi = container_of(dev, struct spi_device, dev); + struct spi_device *spi = to_spi_device(dev); struct trf7970a *trf = spi_get_drvdata(spi); int ret; @@ -2174,7 +2174,7 @@ static int trf7970a_resume(struct device *dev) #ifdef CONFIG_PM static int trf7970a_pm_runtime_suspend(struct device *dev) { - struct spi_device *spi = container_of(dev, struct spi_device, dev); + struct spi_device *spi = to_spi_device(dev); struct trf7970a *trf = spi_get_drvdata(spi); int ret; @@ -2191,7 +2191,7 @@ static int trf7970a_pm_runtime_suspend(struct device *dev) static int trf7970a_pm_runtime_resume(struct device *dev) { - struct spi_device *spi = container_of(dev, struct spi_device, dev); + struct spi_device *spi = to_spi_device(dev); struct trf7970a *trf = spi_get_drvdata(spi); int ret; diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h index cfda59b226ee..ca13992089b8 100644 --- a/include/linux/platform_data/microread.h +++ b/include/linux/platform_data/microread.h @@ -1,5 +1,5 @@ /* - * Driver include for the PN544 NFC chip. + * Driver include for the Inside Secure microread NFC Chip. * * Copyright (C) 2011 Tieto Poland * Copyright (C) 2012 Intel Corporation. All rights reserved. diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index dcfcfc9c00bf..1a3de8b34ad2 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -299,6 +299,7 @@ void nfc_driver_failure(struct nfc_dev *dev, int err); int nfc_se_transaction(struct nfc_dev *dev, u8 se_idx, struct nfc_evt_transaction *evt_transaction); +int nfc_se_connectivity(struct nfc_dev *dev, u8 se_idx); int nfc_add_se(struct nfc_dev *dev, u32 se_idx, u16 type); int nfc_remove_se(struct nfc_dev *dev, u32 se_idx); struct nfc_se *nfc_find_se(struct nfc_dev *dev, u32 se_idx); diff --git a/net/nfc/core.c b/net/nfc/core.c index 1fe3d3b362c0..122bb81da918 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -953,6 +953,19 @@ out: } EXPORT_SYMBOL(nfc_se_transaction); +int nfc_se_connectivity(struct nfc_dev *dev, u8 se_idx) +{ + int rc; + + pr_debug("connectivity: %x\n", se_idx); + + device_lock(&dev->dev); + rc = nfc_genl_se_connectivity(dev, se_idx); + device_unlock(&dev->dev); + return rc; +} +EXPORT_SYMBOL(nfc_se_connectivity); + static void nfc_release(struct device *d) { struct nfc_dev *dev = to_nfc_dev(d); diff --git a/net/nfc/digital_core.c b/net/nfc/digital_core.c index 23c2a118ac9f..dd9003f38822 100644 --- a/net/nfc/digital_core.c +++ b/net/nfc/digital_core.c @@ -20,7 +20,8 @@ #include "digital.h" #define DIGITAL_PROTO_NFCA_RF_TECH \ - (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK | NFC_PROTO_NFC_DEP_MASK) + (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_NFC_DEP_MASK | NFC_PROTO_ISO14443_MASK) #define DIGITAL_PROTO_NFCB_RF_TECH NFC_PROTO_ISO14443_B_MASK diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 10c99a578421..fbb7a2b57b44 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -610,14 +610,14 @@ int nci_core_conn_create(struct nci_dev *ndev, u8 destination_type, struct nci_core_conn_create_cmd *cmd; struct core_conn_create_data data; + if (!number_destination_params) + return -EINVAL; + data.length = params_len + sizeof(struct nci_core_conn_create_cmd); cmd = kzalloc(data.length, GFP_KERNEL); if (!cmd) return -ENOMEM; - if (!number_destination_params) - return -EINVAL; - cmd->destination_type = destination_type; cmd->number_destination_params = number_destination_params; memcpy(cmd->params, params, params_len); diff --git a/net/nfc/nci/hci.c b/net/nfc/nci/hci.c index 2aedac15cb59..a0ab26d535dc 100644 --- a/net/nfc/nci/hci.c +++ b/net/nfc/nci/hci.c @@ -676,7 +676,7 @@ int nci_hci_connect_gate(struct nci_dev *ndev, break; default: pipe = nci_hci_create_pipe(ndev, dest_host, dest_gate, &r); - if (pipe < 0) + if (pipe == NCI_HCI_INVALID_PIPE) return r; pipe_created = true; break; diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c index f58c1fba1026..ea023b35f1c2 100644 --- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -552,6 +552,43 @@ free_msg: return -EMSGSIZE; } +int nfc_genl_se_connectivity(struct nfc_dev *dev, u8 se_idx) +{ + struct nfc_se *se; + struct sk_buff *msg; + void *hdr; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) + return -ENOMEM; + + hdr = genlmsg_put(msg, 0, 0, &nfc_genl_family, 0, + NFC_EVENT_SE_CONNECTIVITY); + if (!hdr) + goto free_msg; + + se = nfc_find_se(dev, se_idx); + if (!se) + goto free_msg; + + if (nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) || + nla_put_u32(msg, NFC_ATTR_SE_INDEX, se_idx) || + nla_put_u8(msg, NFC_ATTR_SE_TYPE, se->type)) + goto nla_put_failure; + + genlmsg_end(msg, hdr); + + genlmsg_multicast(&nfc_genl_family, msg, 0, 0, GFP_KERNEL); + + return 0; + +nla_put_failure: + genlmsg_cancel(msg, hdr); +free_msg: + nlmsg_free(msg); + return -EMSGSIZE; +} + static int nfc_genl_send_device(struct sk_buff *msg, struct nfc_dev *dev, u32 portid, u32 seq, struct netlink_callback *cb, diff --git a/net/nfc/nfc.h b/net/nfc/nfc.h index c20b784ad720..6c6f76b370b1 100644 --- a/net/nfc/nfc.h +++ b/net/nfc/nfc.h @@ -105,6 +105,7 @@ int nfc_genl_se_added(struct nfc_dev *dev, u32 se_idx, u16 type); int nfc_genl_se_removed(struct nfc_dev *dev, u32 se_idx); int nfc_genl_se_transaction(struct nfc_dev *dev, u8 se_idx, struct nfc_evt_transaction *evt_transaction); +int nfc_genl_se_connectivity(struct nfc_dev *dev, u8 se_idx); struct nfc_dev *nfc_get_device(unsigned int idx); |