summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml4
-rw-r--r--Documentation/devicetree/bindings/clock/imx23-clock.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/imx28-clock.yaml2
-rw-r--r--Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml8
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mxs.yaml2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mxs.yaml2
-rw-r--r--Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml2
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml2
-rw-r--r--Documentation/devicetree/bindings/mmc/mxs-mmc.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/ethernet-controller.yaml3
-rw-r--r--Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml8
-rw-r--r--Documentation/devicetree/bindings/pwm/mxs-pwm.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml2
-rw-r--r--Documentation/devicetree/bindings/thermal/imx-thermal.yaml2
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--Documentation/devicetree/writing-schema.rst4
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi.dtsi2
-rw-r--r--drivers/of/address.c21
-rw-r--r--scripts/dtc/Makefile2
21 files changed, 53 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 17e4f20c8d39..6834f5e8df5f 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -23,7 +23,7 @@ properties:
compatible:
items:
- const: raspberrypi,bcm2835-firmware
- - const: simple-bus
+ - const: simple-mfd
mboxes:
$ref: '/schemas/types.yaml#/definitions/phandle'
@@ -57,7 +57,7 @@ required:
examples:
- |
firmware {
- compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
mboxes = <&mailbox>;
firmware_clocks: clocks {
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index 4028c1f428f9..5e296a00e14f 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Clock bindings for Freescale i.MX23
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
description: |
The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index 671b2790546b..f831b780f951 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Clock bindings for Freescale i.MX28
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
description: |
The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
index 85ef69ffebed..1465c9ebaf93 100644
--- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -67,7 +67,7 @@ examples:
main_crypto: crypto@4e00000 {
compatible = "ti,j721-sa2ul";
- reg = <0x0 0x4e00000 0x0 0x1200>;
+ reg = <0x4e00000 0x1200>;
power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
<&main_udmap 0x4001>;
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
index 52a939cade3b..7b9d468c3e52 100644
--- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -145,10 +145,10 @@ examples:
display@fd4a0000 {
compatible = "xlnx,zynqmp-dpsub-1.7";
- reg = <0x0 0xfd4a0000 0x0 0x1000>,
- <0x0 0xfd4aa000 0x0 0x1000>,
- <0x0 0xfd4ab000 0x0 0x1000>,
- <0x0 0xfd4ac000 0x0 0x1000>;
+ reg = <0xfd4a0000 0x1000>,
+ <0xfd4aa000 0x1000>,
+ <0xfd4ab000 0x1000>,
+ <0xfd4ac000 0x1000>;
reg-names = "dp", "blend", "av_buf", "aud";
interrupts = <0 119 4>;
interrupt-parent = <&gic>;
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
index 5de510f8c88c..2a595b18ff6c 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -57,7 +57,7 @@ examples:
dma: dma-controller@fd4c0000 {
compatible = "xlnx,zynqmp-dpdma";
- reg = <0x0 0xfd4c0000 0x0 0x1000>;
+ reg = <0xfd4c0000 0x1000>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&dpdma_clk>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
index ccf5b50e798b..dfa1133f8c5e 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale MXS GPIO controller
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
- Anson Huang <Anson.Huang@nxp.com>
description: |
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
index d3134ed775fa..21ae7bce038e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale MXS Inter IC (I2C) Controller
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index 24ad1446445e..fe7fa25877fd 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -30,7 +30,7 @@ properties:
const: 0
patternProperties:
- "^multi-led[0-9a-f]$":
+ "^multi-led@[0-9a-b]$":
type: object
allOf:
- $ref: leds-class-multicolor.yaml#
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 75dc1168d717..10b45966f1b8 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
allOf:
- $ref: "mmc-controller.yaml"
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index 1cccc0478d49..bec8f8c71ff2 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale MXS MMC controller
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
description: |
The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 1c4474036d46..fa2baca8c726 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -54,7 +54,8 @@ properties:
phy-connection-type:
description:
- Operation mode of the PHY interface
+ Specifies interface type between the Ethernet device and a physical
+ layer (PHY) device.
enum:
# There is not a standard bus between the MAC and the PHY,
# something proprietary is being used to embed the PHY in the
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
index 64b2c64ca806..a1e2be737eec 100644
--- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -9,6 +9,14 @@ title: PCIe RC controller on Intel Gateway SoCs
maintainers:
- Dilip Kota <eswara.kota@linux.intel.com>
+select:
+ properties:
+ compatible:
+ contains:
+ const: intel,lgm-pcie
+ required:
+ - compatible
+
properties:
compatible:
items:
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
index da68f4a25dd9..8740e076061e 100644
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale MXS PWM controller
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
- Anson Huang <anson.huang@nxp.com>
properties:
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
index 1b50cedbfb3e..50df1a40bbe3 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
allOf:
- $ref: "/schemas/spi/spi-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index aedac1669998..16b57f57d103 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX Thermal Binding
maintainers:
- - Shawn Guo <shawn.guo@linaro.org>
+ - Shawn Guo <shawnguo@kernel.org>
- Anson Huang <Anson.Huang@nxp.com>
properties:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 844c25a24818..d36e309b7d76 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1001,7 +1001,7 @@ patternProperties:
"^sst,.*":
description: Silicon Storage Technology, Inc.
"^sstar,.*":
- description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
+ description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
(formerly part of MStar Semiconductor, Inc.)
"^st,.*":
description: STMicroelectronics
diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst
index 8c74a99f95e2..16f21e182ff6 100644
--- a/Documentation/devicetree/writing-schema.rst
+++ b/Documentation/devicetree/writing-schema.rst
@@ -5,7 +5,7 @@ Writing DeviceTree Bindings in json-schema
Devicetree bindings are written using json-schema vocabulary. Schema files are
written in a JSON compatible subset of YAML. YAML is used instead of JSON as it
-considered more human readable and has some advantages such as allowing
+is considered more human readable and has some advantages such as allowing
comments (Prefixed with '#').
Schema Contents
@@ -19,7 +19,7 @@ $id
A json-schema unique identifier string. The string must be a valid
URI typically containing the binding's filename and path. For DT schema, it must
begin with "http://devicetree.org/schemas/". The URL is used in constructing
- references to other files specified in schema "$ref" properties. A $ref values
+ references to other files specified in schema "$ref" properties. A $ref value
with a leading '/' will have the hostname prepended. A $ref value a relative
path or filename only will be prepended with the hostname and path components
of the current schema file's '$id' value. A URL is used even for local files,
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index f7ae5a4530b8..d94357b21f7e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -13,7 +13,7 @@
soc {
firmware: firmware {
- compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 590493e04b01..da4f7341323f 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -128,15 +128,29 @@ static unsigned int of_bus_pci_get_flags(const __be32 *addr)
* PCI bus specific translator
*/
+static bool of_node_is_pcie(struct device_node *np)
+{
+ bool is_pcie = of_node_name_eq(np, "pcie");
+
+ if (is_pcie)
+ pr_warn_once("%pOF: Missing device_type\n", np);
+
+ return is_pcie;
+}
+
static int of_bus_pci_match(struct device_node *np)
{
/*
* "pciex" is PCI Express
* "vci" is for the /chaos bridge on 1st-gen PCI powermacs
* "ht" is hypertransport
+ *
+ * If none of the device_type match, and that the node name is
+ * "pcie", accept the device as PCI (with a warning).
*/
return of_node_is_type(np, "pci") || of_node_is_type(np, "pciex") ||
- of_node_is_type(np, "vci") || of_node_is_type(np, "ht");
+ of_node_is_type(np, "vci") || of_node_is_type(np, "ht") ||
+ of_node_is_pcie(np);
}
static void of_bus_pci_count_cells(struct device_node *np,
@@ -985,6 +999,11 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
/* Don't error out as we'd break some existing DTs */
continue;
}
+ if (range.cpu_addr == OF_BAD_ADDR) {
+ pr_err("translation of DMA address(%llx) to CPU address failed node(%pOF)\n",
+ range.bus_addr, node);
+ continue;
+ }
dma_offset = range.cpu_addr - range.bus_addr;
/* Take lower and upper limits */
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index a698ece43fff..4852bf44e913 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
# Source files need to get at the userspace version of libfdt_env.h to compile
-HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
+HOST_EXTRACFLAGS += -I $(srctree)/$(src)/libfdt
ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
ifneq ($(CHECK_DT_BINDING)$(CHECK_DTBS),)